SSB-GigE: Fix IRQ routing. This makes the device work. Yay! :)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10532 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
index 7bae2b0..90346e2 100644 (file)
--- a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
+++ b/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
@@ -31,8 +31,8 @@ Index: linux-2.6.23.16/drivers/ssb/Makefile
 Index: linux-2.6.23.16/drivers/ssb/driver_gige.c
 ===================================================================
 --- /dev/null  1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.23.16/drivers/ssb/driver_gige.c  2008-02-22 20:59:46.000000000 +0100
-@@ -0,0 +1,281 @@
++++ linux-2.6.23.16/drivers/ssb/driver_gige.c  2008-02-28 12:26:18.000000000 +0100
+@@ -0,0 +1,286 @@
 +/*
 + * Sonics Silicon Backplane
 + * Broadcom Gigabit Ethernet core driver
@@ -49,16 +49,17 @@ Index: linux-2.6.23.16/drivers/ssb/driver_gige.c
 +#include <linux/ssb/ssb_driver_gige.h>
 +
 +
++/*
 +MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
 +MODULE_AUTHOR("Michael Buesch");
 +MODULE_LICENSE("GPL");
-+
++*/
 +
 +static const struct ssb_device_id ssb_gige_tbl[] = {
 +      SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
 +      SSB_DEVTABLE_END
 +};
-+MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl);
++/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
 +
 +
 +static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
@@ -288,6 +289,10 @@ Index: linux-2.6.23.16/drivers/ssb/driver_gige.c
 +      res->start = dev->mem_resource.start;
 +      res->end = dev->mem_resource.end;
 +
++      /* Fixup interrupt lines. */
++      pdev->irq = ssb_mips_irq(sdev) + 2;
++      pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
++
 +      return 0;
 +}
 +
@@ -912,7 +917,7 @@ Index: linux-2.6.23.16/drivers/ssb/ssb_private.h
 Index: linux-2.6.23.16/drivers/net/tg3.c
 ===================================================================
 --- linux-2.6.23.16.orig/drivers/net/tg3.c     2008-02-22 19:40:57.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/tg3.c  2008-02-27 23:18:31.000000000 +0100
++++ linux-2.6.23.16/drivers/net/tg3.c  2008-02-28 12:28:17.000000000 +0100
 @@ -38,6 +38,7 @@
  #include <linux/workqueue.h>
  #include <linux/prefetch.h>
@@ -1229,3 +1234,15 @@ Index: linux-2.6.23.16/drivers/net/tg3.h
  
        struct tg3_hw_stats             *hw_stats;
        dma_addr_t                      stats_mapping;
+Index: linux-2.6.23.16/drivers/ssb/driver_mipscore.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/driver_mipscore.c 2008-02-20 20:02:43.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/driver_mipscore.c      2008-02-28 12:16:12.000000000 +0100
+@@ -211,6 +211,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+                       /* fallthrough */
+               case SSB_DEV_PCI:
+               case SSB_DEV_ETHERNET:
++              case SSB_DEV_ETHERNET_GBIT:
+               case SSB_DEV_80211:
+               case SSB_DEV_USB20_HOST:
+                       /* These devices get their own IRQ line if available, the rest goes on IRQ0 */