ifxmips pci does not cause a hang anymore, but due to lack of antenna i get no link...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9840 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ifxmips/files/arch/mips/ifxmips/pci.c b/target/linux/ifxmips/files/arch/mips/ifxmips/pci.c
index 3032d87..69caf67 100644 (file)
--- a/target/linux/ifxmips/files/arch/mips/ifxmips/pci.c
+++ b/target/linux/ifxmips/files/arch/mips/ifxmips/pci.c
@@ -21,6 +21,8 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
+//#define CONFIG_IFXMIPS_PCI_HW_SWAP 1
+
 static int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
 static int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
 
@@ -251,7 +253,7 @@ static void __init ifxmips_pci_startup (void){
        /* FPI ==> PCI IO address mapping */
        /* base: 0xbAE00000 == > 0xbAE00000 */
        /* size: 2M */
-       writel(0xbae00000, PCI_CR_FCI_ADDR_MAP11hg);
+       writel(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
 
        /* PCI ==> FPI address mapping */
        /* base: 0x0 ==> 0x0 */
@@ -262,7 +264,7 @@ static void __init ifxmips_pci_startup (void){
        writel(0, PCI_CS_BASE_ADDR1);
 #ifdef CONFIG_IFXMIPS_PCI_HW_SWAP
        /* both TX and RX endian swap are enabled */
-       IFXMIPS_PCI_REG32 (PCI_CR_PCI_EOI_REG) |= 3;
+       writel(readl(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
        wmb ();
 #endif
        /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
@@ -280,7 +282,6 @@ static void __init ifxmips_pci_startup (void){
 }
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
-       printk("\n\n\n%s:%s[%d] %d %d\n", __FILE__, __func__, __LINE__, slot, pin);
        switch (slot) {
                case 13:
                        /* IDSEL = AD29 --> USB Host Controller */