Put back some code from the 2.4 driver, supposed to boot network perfs

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8354 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/rdc-2.6/files/drivers/net/r6040.c b/target/linux/rdc-2.6/files/drivers/net/r6040.c
index de58e65..135ea13 100644 (file)
--- a/target/linux/rdc-2.6/files/drivers/net/r6040.c
+++ b/target/linux/rdc-2.6/files/drivers/net/r6040.c
@@ -861,18 +861,19 @@ for (i = 0; i < RX_DCNT; i++) {
        outw(MAX_BUF_SIZE, ioaddr+0x18);
 
        if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == 0x0243)        // ICPlus IP175C Signature
        outw(MAX_BUF_SIZE, ioaddr+0x18);
 
        if ((lp->switch_sig = phy_read(ioaddr, 0, 2)) == 0x0243)        // ICPlus IP175C Signature

-{
-       phy_write(ioaddr, 29,31, 0x175C);       //Enable registers
-       lp->phy_mode = 0x8000;
-} else {
-       /* PHY Mode Check */
-       phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
-       phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
-
-       if (PHY_MODE == 0x3100) 
-               lp->phy_mode = phy_mode_chk(dev);
-       else lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
-}
+       {
+               phy_write(ioaddr, 29,31, 0x175C);       //Enable registers
+               lp->phy_mode = 0x8000;
+       } else {
+               /* PHY Mode Check */
+               phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP);
+               phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE);
+
+               if (PHY_MODE == 0x3100)
+                       lp->phy_mode = phy_mode_chk(dev);
+               else
+                       lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
+       }

        /* MAC Bus Control Register */
        outw(MBCR_DEFAULT, ioaddr+0x8);
 
        /* MAC Bus Control Register */
        outw(MBCR_DEFAULT, ioaddr+0x8);
 


@@ -880,6 +881,16 @@ for (i = 0; i < RX_DCNT; i++) {
        lp->mcr0 |= lp->phy_mode;
        outw(lp->mcr0, ioaddr);
 
        lp->mcr0 |= lp->phy_mode;
        outw(lp->mcr0, ioaddr);
 

+       /* set interrupt waiting time and packet numbers */
+       outw(0x0802, ioaddr + 0x0C);
+       outw(0x0802, ioaddr + 0x10);
+
+       /* upgrade performance (by RDC guys) */
+       phy_write(ioaddr,30,17,(phy_read(ioaddr,30,17)|0x4000));        //bit 14=1
+       phy_write(ioaddr,30,17,~((~phy_read(ioaddr,30,17))|0x2000));    //bit 13=0
+       phy_write(ioaddr,0,19,0x0000);
+       phy_write(ioaddr,0,30,0x01F0);
+

        /* Interrupt Mask Register */
        outw(R6040_INT_MASK, ioaddr + 0x40);
 }
        /* Interrupt Mask Register */
        outw(R6040_INT_MASK, ioaddr + 0x40);
 }