add robocfg to startup if kernel 2.6, fix jffs2 compression for 2.4

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1936 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/openwrt/package/base-files/default/etc/init.d/S10boot b/openwrt/package/base-files/default/etc/init.d/S10boot
index a827391..66fece1 100755 (executable)
--- a/openwrt/package/base-files/default/etc/init.d/S10boot
+++ b/openwrt/package/base-files/default/etc/init.d/S10boot
@@ -1,8 +1,9 @@
 #!/bin/sh
 . /etc/nvram.sh
 #!/bin/sh
 . /etc/nvram.sh

-if [ "$(uname -r|grep 2.4)" = "0" ];then
-       echo "S" > /proc/jffs2_bbc
-fi
+
+[ "$(uname -r|grep -c 2.4)" = "1" ] && {
+        echo "S" > /proc/jffs2_bbc
+}

 
 mkdir -p /var/run
 mkdir -p /var/log
 
 mkdir -p /var/run
 mkdir -p /var/log


@@ -32,6 +33,11 @@ sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
 ifconfig lo 127.0.0.1 up
 ifconfig eth0 promisc
 
 ifconfig lo 127.0.0.1 up
 ifconfig eth0 promisc
 

+[ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && {
+  robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
+  robocfg show
+}
+

 HOSTNAME=$(nvram get wan_hostname)
 HOSTNAME=${HOSTNAME%%.*}
 echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
 HOSTNAME=$(nvram get wan_hostname)
 HOSTNAME=${HOSTNAME%%.*}
 echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname