-diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
-index 4de432e..c4c810b 100644
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -61,6 +61,7 @@ extern int root_mountflags;
- extern void _stext, _text, _etext, __data_start, _edata, _end;
-
- unsigned int processor_id;
-+EXPORT_SYMBOL(processor_id);
- unsigned int __machine_arch_type;
- EXPORT_SYMBOL(__machine_arch_type);
-
-diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
-index 61b2dfc..e774447 100644
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -189,6 +189,20 @@ config IXP4XX_INDIRECT_PCI
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
-+config IXP4XX_QMGR
-+ tristate "IXP4xx Queue Manager support"
-+ help
-+ This driver supports IXP4xx built-in hardware queue manager
-+ and is automatically selected by Ethernet and HSS drivers.
+diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
+index f9cc2b6..9274d3f 100644
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -47,3 +47,13 @@ config EP93XX_ETH
+ help
+ This is a driver for the ethernet hardware included in EP93xx CPUs.
+ Say Y if you are building a kernel for EP93xx based devices.
+
-+config IXP4XX_NPE
-+ tristate "IXP4xx Network Processor Engine support"
-+ select HOTPLUG
-+ select FW_LOADER
++config IXP4XX_ETH
++ tristate "IXP4xx Ethernet support"
++ depends on NET_ETHERNET && ARM && ARCH_IXP4XX
++ select IXP4XX_NPE
++ select IXP4XX_QMGR
++ select MII
+ help
-+ This driver supports IXP4xx built-in network coprocessors
-+ and is automatically selected by Ethernet and HSS drivers.
-+
- endmenu
-
- endif
-diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
-index 77e00ad..4bb97e1 100644
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -30,3 +30,5 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
-index d5008d8..10b41c6 100644
---- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -177,6 +177,31 @@ static struct platform_device ixdp425_uart = {
- .resource = ixdp425_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdp425_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdp425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdp425_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdp425_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_controller,
- &ixdp425_flash,
-@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_devices[] __initdata = {
- defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
- &ixdp425_flash_nand,
- #endif
-- &ixdp425_uart
-+ &ixdp425_uart,
-+ &ixdp425_eth[0],
-+ &ixdp425_eth[1],
- };
-
- static void __init ixdp425_init(void)
-diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++ Say Y here if you want to use built-in Ethernet ports
++ on IXP4xx processor.
+diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
+index a4c8682..7c812ac 100644
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
+ obj-$(CONFIG_ARM_ETHER1) += ether1.o
+ obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
+ obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
++obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
new file mode 100644
-index 0000000..83c137e
+index 0000000..98131a7
--- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -0,0 +1,741 @@
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -0,0 +1,1261 @@
+/*
-+ * Intel IXP4xx Network Processor Engine driver for Linux
++ * Intel IXP4xx Ethernet driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
-+ * The code is based on publicly available information:
-+ * - Intel IXP4xx Developer's Manual and other e-papers
-+ * - Intel IXP400 Access Library Software (BSD license)
-+ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ * Thanks, Christian.
++ * Ethernet port config (0x00 is not present on IXP42X):
++ *
++ * logical port 0x00 0x10 0x20
++ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
++ * physical PortId 2 0 1
++ * TX queue 23 24 25
++ * RX-free queue 26 27 28
++ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
++ *
++ *
++ * Queue entries:
++ * bits 0 -> 1 - NPE ID (RX and TX-done)
++ * bits 0 -> 2 - priority (TX, per 802.1D)
++ * bits 3 -> 4 - port ID (user-set?)
++ * bits 5 -> 31 - physical descriptor address
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
-+#include <linux/firmware.h>
++#include <linux/dmapool.h>
++#include <linux/etherdevice.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
++#include <linux/mii.h>
++#include <linux/platform_device.h>
+#include <asm/arch/npe.h>
++#include <asm/arch/qmgr.h>
+
-+#define DEBUG_MSG 0
-+#define DEBUG_FW 0
++#define DEBUG_QUEUES 0
++#define DEBUG_DESC 0
++#define DEBUG_RX 0
++#define DEBUG_TX 0
++#define DEBUG_PKT_BYTES 0
++#define DEBUG_MDIO 0
++#define DEBUG_CLOSE 0
+
-+#define NPE_COUNT 3
-+#define MAX_RETRIES 1000 /* microseconds */
-+#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
-+#define NPE_46X_DATA_SIZE 0x1000
-+#define NPE_A_42X_INSTR_SIZE 0x1000
-+#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
-+#define NPE_46X_INSTR_SIZE 0x1000
-+#define REGS_SIZE 0x1000
++#define DRV_NAME "ixp4xx_eth"
+
-+#define NPE_PHYS_REG 32
++#define MAX_NPES 3
+
-+#define FW_MAGIC 0xFEEDF00D
-+#define FW_BLOCK_TYPE_INSTR 0x0
-+#define FW_BLOCK_TYPE_DATA 0x1
-+#define FW_BLOCK_TYPE_EOF 0xF
++#define RX_DESCS 64 /* also length of all RX queues */
++#define TX_DESCS 16 /* also length of all TX queues */
++#define TXDONE_QUEUE_LEN 64 /* dwords */
+
-+/* NPE exec status (read) and command (write) */
-+#define CMD_NPE_STEP 0x01
-+#define CMD_NPE_START 0x02
-+#define CMD_NPE_STOP 0x03
-+#define CMD_NPE_CLR_PIPE 0x04
-+#define CMD_CLR_PROFILE_CNT 0x0C
-+#define CMD_RD_INS_MEM 0x10 /* instruction memory */
-+#define CMD_WR_INS_MEM 0x11
-+#define CMD_RD_DATA_MEM 0x12 /* data memory */
-+#define CMD_WR_DATA_MEM 0x13
-+#define CMD_RD_ECS_REG 0x14 /* exec access register */
-+#define CMD_WR_ECS_REG 0x15
++#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define REGS_SIZE 0x1000
++#define MAX_MRU 1536 /* 0x600 */
+
-+#define STAT_RUN 0x80000000
-+#define STAT_STOP 0x40000000
-+#define STAT_CLEAR 0x20000000
-+#define STAT_ECS_K 0x00800000 /* pipeline clean */
++#define MDIO_INTERVAL (3 * HZ)
++#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
++#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
++#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
+
-+#define NPE_STEVT 0x1B
-+#define NPE_STARTPC 0x1C
-+#define NPE_REGMAP 0x1E
-+#define NPE_CINDEX 0x1F
++#define NPE_ID(port_id) ((port_id) >> 4)
++#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3)
++#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23)
++#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26)
++#define TXDONE_QUEUE 31
+
-+#define INSTR_WR_REG_SHORT 0x0000C000
-+#define INSTR_WR_REG_BYTE 0x00004000
-+#define INSTR_RD_FIFO 0x0F888220
-+#define INSTR_RESET_MBOX 0x0FAC8210
++#define ETH_NAPI_WEIGHT 16
+
-+#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
-+#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
-+#define ECS_BG_CTXT_REG_2 0x02
-+#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
-+#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
-+#define ECS_PRI_1_CTXT_REG_2 0x06
-+#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
-+#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
-+#define ECS_PRI_2_CTXT_REG_2 0x0A
-+#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
-+#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
-+#define ECS_DBG_CTXT_REG_2 0x0E
-+#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
++/* TX Control Registers */
++#define TX_CNTRL0_TX_EN 0x01
++#define TX_CNTRL0_HALFDUPLEX 0x02
++#define TX_CNTRL0_RETRY 0x04
++#define TX_CNTRL0_PAD_EN 0x08
++#define TX_CNTRL0_APPEND_FCS 0x10
++#define TX_CNTRL0_2DEFER 0x20
++#define TX_CNTRL0_RMII 0x40 /* reduced MII */
++#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
+
-+#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
-+#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
-+#define ECS_REG_0_LDUR_BITS 8
-+#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
-+#define ECS_REG_1_CCTXT_BITS 16
-+#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
-+#define ECS_REG_1_SELCTXT_BITS 0
-+#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
-+#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
-+#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
++/* RX Control Registers */
++#define RX_CNTRL0_RX_EN 0x01
++#define RX_CNTRL0_PADSTRIP_EN 0x02
++#define RX_CNTRL0_SEND_FCS 0x04
++#define RX_CNTRL0_PAUSE_EN 0x08
++#define RX_CNTRL0_LOOP_EN 0x10
++#define RX_CNTRL0_ADDR_FLTR_EN 0x20
++#define RX_CNTRL0_RX_RUNT_EN 0x40
++#define RX_CNTRL0_BCAST_DIS 0x80
++#define RX_CNTRL1_DEFER_EN 0x01
+
-+/* NPE watchpoint_fifo register bit */
-+#define WFIFO_VALID 0x80000000
-+
-+/* NPE messaging_status register bit definitions */
-+#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
-+#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
-+#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
-+#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
-+#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
-+#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
-+#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
-+#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
++/* Core Control Register */
++#define CORE_RESET 0x01
++#define CORE_RX_FIFO_FLUSH 0x02
++#define CORE_TX_FIFO_FLUSH 0x04
++#define CORE_SEND_JAM 0x08
++#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */
+
-+/* NPE messaging_control register bit definitions */
-+#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
-+#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
-+#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
-+#define MSGCTL_IN_FIFO_WRITE 0x02000000
++#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \
++ TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
++ TX_CNTRL0_2DEFER)
++#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN
++#define DEFAULT_CORE_CNTRL CORE_MDC_EN
+
-+/* NPE mailbox_status value for reset */
-+#define RESET_MBOX_STAT 0x0000F0F0
+
-+const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
++/* NPE message codes */
++#define NPE_GETSTATUS 0x00
++#define NPE_EDB_SETPORTADDRESS 0x01
++#define NPE_EDB_GETMACADDRESSDATABASE 0x02
++#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
++#define NPE_GETSTATS 0x04
++#define NPE_RESETSTATS 0x05
++#define NPE_SETMAXFRAMELENGTHS 0x06
++#define NPE_VLAN_SETRXTAGMODE 0x07
++#define NPE_VLAN_SETDEFAULTRXVID 0x08
++#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
++#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
++#define NPE_VLAN_SETRXQOSENTRY 0x0B
++#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
++#define NPE_STP_SETBLOCKINGSTATE 0x0D
++#define NPE_FW_SETFIREWALLMODE 0x0E
++#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
++#define NPE_PC_SETAPMACTABLE 0x11
++#define NPE_SETLOOPBACK_MODE 0x12
++#define NPE_PC_SETBSSIDTABLE 0x13
++#define NPE_ADDRESS_FILTER_CONFIG 0x14
++#define NPE_APPENDFCSCONFIG 0x15
++#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
++#define NPE_MAC_RECOVERY_START 0x17
+
-+#define print_npe(pri, npe, fmt, ...) \
-+ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
+
-+#if DEBUG_MSG
-+#define debug_msg(npe, fmt, ...) \
-+ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
+#else
-+#define debug_msg(npe, fmt, ...)
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
+#endif
+
-+static struct {
-+ u32 reg, val;
-+} ecs_reset[] = {
-+ { ECS_BG_CTXT_REG_0, 0xA0000000 },
-+ { ECS_BG_CTXT_REG_1, 0x01000000 },
-+ { ECS_BG_CTXT_REG_2, 0x00008000 },
-+ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
-+ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
-+ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
-+ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
-+ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
-+ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
-+ { ECS_DBG_CTXT_REG_0, 0x20000000 },
-+ { ECS_DBG_CTXT_REG_1, 0x00000000 },
-+ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
-+ { ECS_INSTRUCT_REG, 0x1003C00F },
++struct eth_regs {
++ u32 tx_control[2], __res1[2]; /* 000 */
++ u32 rx_control[2], __res2[2]; /* 010 */
++ u32 random_seed, __res3[3]; /* 020 */
++ u32 partial_empty_threshold, __res4; /* 030 */
++ u32 partial_full_threshold, __res5; /* 038 */
++ u32 tx_start_bytes, __res6[3]; /* 040 */
++ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
++ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
++ u32 slot_time, __res9[3]; /* 070 */
++ u32 mdio_command[4]; /* 080 */
++ u32 mdio_status[4]; /* 090 */
++ u32 mcast_mask[6], __res10[2]; /* 0A0 */
++ u32 mcast_addr[6], __res11[2]; /* 0C0 */
++ u32 int_clock_threshold, __res12[3]; /* 0E0 */
++ u32 hw_addr[6], __res13[61]; /* 0F0 */
++ u32 core_control; /* 1FC */
+};
+
-+static struct npe npe_tab[NPE_COUNT] = {
-+ {
-+ .id = 0,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
-+ }, {
-+ .id = 1,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
-+ }, {
-+ .id = 2,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
-+ }
++struct port {
++ struct resource *mem_res;
++ struct eth_regs __iomem *regs;
++ struct npe *npe;
++ struct net_device *netdev;
++ struct napi_struct napi;
++ struct net_device_stats stat;
++ struct mii_if_info mii;
++ struct delayed_work mdio_thread;
++ struct eth_plat_info *plat;
++ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
++ struct desc *desc_tab; /* coherent */
++ u32 desc_tab_phys;
++ int id; /* logical port ID */
++ u16 mii_bmcr;
+};
+
-+int npe_running(struct npe *npe)
-+{
-+ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
-+}
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++ u8 cmd, eth_id, byte2, byte3;
++ u8 byte4, byte5, byte6, byte7;
++#else
++ u8 byte3, byte2, eth_id, cmd;
++ u8 byte7, byte6, byte5, byte4;
++#endif
++};
+
-+static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
-+{
-+ __raw_writel(data, &npe->regs->exec_data);
-+ __raw_writel(addr, &npe->regs->exec_addr);
-+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
-+}
++/* Ethernet packet descriptor */
++struct desc {
++ u32 next; /* pointer to next buffer, unused */
+
-+static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
-+{
-+ __raw_writel(addr, &npe->regs->exec_addr);
-+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
-+ /* Iintroduce extra read cycles after issuing read command to NPE
-+ so that we read the register after the NPE has updated it.
-+ This is to overcome race condition between XScale and NPE */
-+ __raw_readl(&npe->regs->exec_data);
-+ __raw_readl(&npe->regs->exec_data);
-+ return __raw_readl(&npe->regs->exec_data);
-+}
++#ifdef __ARMEB__
++ u16 buf_len; /* buffer length */
++ u16 pkt_len; /* packet length */
++ u32 data; /* pointer to data buffer in RAM */
++ u8 dest_id;
++ u8 src_id;
++ u16 flags;
++ u8 qos;
++ u8 padlen;
++ u16 vlan_tci;
++#else
++ u16 pkt_len; /* packet length */
++ u16 buf_len; /* buffer length */
++ u32 data; /* pointer to data buffer in RAM */
++ u16 flags;
++ u8 src_id;
++ u8 dest_id;
++ u16 vlan_tci;
++ u8 padlen;
++ u8 qos;
++#endif
+
-+static void npe_clear_active(struct npe *npe, u32 reg)
-+{
-+ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
-+ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
-+}
++#ifdef __ARMEB__
++ u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
++ u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
++ u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
++#else
++ u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
++ u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
++ u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
++#endif
++};
+
-+static void npe_start(struct npe *npe)
-+{
-+ /* ensure only Background Context Stack Level is active */
-+ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
-+ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
-+ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
+
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
-+}
++#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
+
-+static void npe_stop(struct npe *npe)
-+{
-+ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
-+}
++#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
+
-+static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
-+ u32 ldur)
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
+{
-+ u32 wc;
+ int i;
++ for (i = 0; i < cnt; i++)
++ dest[i] = swab32(src[i]);
++}
++#endif
+
-+ /* set the Active bit, and the LDUR, in the debug level */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
-+ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
++static spinlock_t mdio_lock;
++static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
++static int ports_open;
++static struct port *npe_port_tab[MAX_NPES];
++static struct dma_pool *dma_pool;
+
-+ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
-+ the instruction, and set SELCTXT at ECS DEBUG Level to specify
-+ which context store to access.
-+ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
-+ */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
-+ (ctx << ECS_REG_1_CCTXT_BITS) |
-+ (ctx << ECS_REG_1_SELCTXT_BITS));
+
-+ /* clear the pipeline */
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
++static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
++ int write, u16 cmd)
++{
++ int cycles = 0;
+
-+ /* load NPE instruction into the instruction register */
-+ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
++ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
++ printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
++ return 0;
++ }
+
-+ /* we need this value later to wait for completion of NPE execution
-+ step */
-+ wc = __raw_readl(&npe->regs->watch_count);
-+
-+ /* issue a Step One command via the Execution Control register */
-+ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
++ if (write) {
++ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
++ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
++ }
++ __raw_writel(((phy_id << 5) | location) & 0xFF,
++ &mdio_regs->mdio_command[2]);
++ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
++ &mdio_regs->mdio_command[3]);
+
-+ /* Watch Count register increments when NPE completes an instruction */
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (wc != __raw_readl(&npe->regs->watch_count))
-+ return 0;
++ while ((cycles < MAX_MDIO_RETRIES) &&
++ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
+ udelay(1);
++ cycles++;
+ }
+
-+ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
-+ return -ETIMEDOUT;
-+}
++ if (cycles == MAX_MDIO_RETRIES) {
++ printk(KERN_ERR "%s: MII write failed\n", dev->name);
++ return 0;
++ }
+
-+static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
-+ u8 val, u32 ctx)
-+{
-+ /* here we build the NPE assembler instruction: mov8 d0, #0 */
-+ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
-+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-+}
++#if DEBUG_MDIO
++ printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
++ cycles);
++#endif
+
-+static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
-+ u16 val, u32 ctx)
-+{
-+ /* here we build the NPE assembler instruction: mov16 d0, #0 */
-+ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
-+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-+}
++ if (write)
++ return 0;
+
-+static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
-+ u32 val, u32 ctx)
-+{
-+ /* write in 16 bit steps first the high and then the low value */
-+ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
-+ return -ETIMEDOUT;
-+ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
++ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
++ printk(KERN_ERR "%s: MII read failed\n", dev->name);
++ return 0;
++ }
++
++ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
++ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
+}
+
-+static int npe_reset(struct npe *npe)
++static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
-+ u32 val, ctl, exec_count, ctx_reg2;
-+ int i;
++ unsigned long flags;
++ u16 val;
+
-+ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
-+ 0x3F3FFFFF;
++ spin_lock_irqsave(&mdio_lock, flags);
++ val = mdio_cmd(dev, phy_id, location, 0, 0);
++ spin_unlock_irqrestore(&mdio_lock, flags);
++ return val;
++}
+
-+ /* disable parity interrupt */
-+ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
++static void mdio_write(struct net_device *dev, int phy_id, int location,
++ int val)
++{
++ unsigned long flags;
+
-+ /* pre exec - debug instruction */
-+ /* turn off the halt bit by clearing Execution Count register. */
-+ exec_count = __raw_readl(&npe->regs->exec_count);
-+ __raw_writel(0, &npe->regs->exec_count);
-+ /* ensure that IF and IE are on (temporarily), so that we don't end up
-+ stepping forever */
-+ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
-+ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
++ spin_lock_irqsave(&mdio_lock, flags);
++ mdio_cmd(dev, phy_id, location, 1, val);
++ spin_unlock_irqrestore(&mdio_lock, flags);
++}
+
-+ /* clear the FIFOs */
-+ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
-+ ;
-+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
-+ /* read from the outFIFO until empty */
-+ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
-+ __raw_readl(&npe->regs->in_out_fifo));
++static void phy_reset(struct net_device *dev, int phy_id)
++{
++ struct port *port = netdev_priv(dev);
++ int cycles = 0;
+
-+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
-+ /* step execution of the NPE intruction to read inFIFO using
-+ the Debug Executing Context stack */
-+ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
-+ return -ETIMEDOUT;
++ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
++
++ while (cycles < MAX_MII_RESET_RETRIES) {
++ if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
++#if DEBUG_MDIO
++ printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
++ dev->name, cycles);
++#endif
++ return;
++ }
++ udelay(1);
++ cycles++;
++ }
+
-+ /* reset the mailbox reg from the XScale side */
-+ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
-+ /* from NPE side */
-+ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
-+ return -ETIMEDOUT;
++ printk(KERN_ERR "%s: MII reset failed\n", dev->name);
++}
+
-+ /* Reset the physical registers in the NPE register file */
-+ for (val = 0; val < NPE_PHYS_REG; val++) {
-+ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
-+ return -ETIMEDOUT;
-+ /* address is either 0 or 4 */
-+ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
-+ return -ETIMEDOUT;
-+ }
++static void eth_set_duplex(struct port *port)
++{
++ if (port->mii.full_duplex)
++ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
++ &port->regs->tx_control[0]);
++ else
++ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
++ &port->regs->tx_control[0]);
++}
+
-+ /* Reset the context store = each context's Context Store registers */
+
-+ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
-+ for Background ECS, to set where NPE starts executing code */
-+ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
-+ val &= ~ECS_REG_0_NEXTPC_MASK;
-+ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
-+ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
++static void phy_check_media(struct port *port, int init)
++{
++ if (mii_check_media(&port->mii, 1, init))
++ eth_set_duplex(port);
++ if (port->mii.force_media) { /* mii_check_media() doesn't work */
++ struct net_device *dev = port->netdev;
++ int cur_link = mii_link_ok(&port->mii);
++ int prev_link = netif_carrier_ok(dev);
+
-+ for (i = 0; i < 16; i++) {
-+ if (i) { /* Context 0 has no STEVT nor STARTPC */
-+ /* STEVT = off, 0x80 */
-+ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
-+ return -ETIMEDOUT;
-+ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
-+ return -ETIMEDOUT;
++ if (!prev_link && cur_link) {
++ printk(KERN_INFO "%s: link up\n", dev->name);
++ netif_carrier_on(dev);
++ } else if (prev_link && !cur_link) {
++ printk(KERN_INFO "%s: link down\n", dev->name);
++ netif_carrier_off(dev);
+ }
-+ /* REGMAP = d0->p0, d8->p2, d16->p4 */
-+ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
-+ return -ETIMEDOUT;
-+ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
-+ return -ETIMEDOUT;
+ }
++}
+
-+ /* post exec */
-+ /* clear active bit in debug level */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
-+ /* clear the pipeline */
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+ /* restore previous values */
-+ __raw_writel(exec_count, &npe->regs->exec_count);
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
+
-+ /* write reset values to Execution Context Stack registers */
-+ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
-+ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
-+ ecs_reset[val].val);
++static void mdio_thread(struct work_struct *work)
++{
++ struct port *port = container_of(work, struct port, mdio_thread.work);
+
-+ /* clear the profile counter */
-+ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
++ phy_check_media(port, 0);
++ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++}
+
-+ __raw_writel(0, &npe->regs->exec_count);
-+ __raw_writel(0, &npe->regs->action_points[0]);
-+ __raw_writel(0, &npe->regs->action_points[1]);
-+ __raw_writel(0, &npe->regs->action_points[2]);
-+ __raw_writel(0, &npe->regs->action_points[3]);
-+ __raw_writel(0, &npe->regs->watch_count);
+
-+ val = ixp4xx_read_feature_bits();
-+ /* reset the NPE */
-+ ixp4xx_write_feature_bits(val &
-+ ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (!(ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-+ break; /* reset completed */
-+ udelay(1);
-+ }
-+ if (i == MAX_RETRIES)
-+ return -ETIMEDOUT;
++static inline void debug_pkt(struct net_device *dev, const char *func,
++ u8 *data, int len)
++{
++#if DEBUG_PKT_BYTES
++ int i;
+
-+ /* deassert reset */
-+ ixp4xx_write_feature_bits(val |
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id));
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id))
-+ break; /* NPE is back alive */
-+ udelay(1);
++ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
++ for (i = 0; i < len; i++) {
++ if (i >= DEBUG_PKT_BYTES)
++ break;
++ printk("%s%02X",
++ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
++ data[i]);
+ }
-+ if (i == MAX_RETRIES)
-+ return -ETIMEDOUT;
-+
-+ npe_stop(npe);
-+
-+ /* restore NPE configuration bus Control Register - parity settings */
-+ __raw_writel(ctl, &npe->regs->messaging_control);
-+ return 0;
++ printk("\n");
++#endif
+}
+
+
-+int npe_send_message(struct npe *npe, const void *msg, const char *what)
++static inline void debug_desc(u32 phys, struct desc *desc)
+{
-+ const u32 *send = msg;
-+ int cycles = 0;
-+
-+ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
-+ what, send[0], send[1]);
-+
-+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
-+ debug_msg(npe, "NPE input FIFO not empty\n");
-+ return -EIO;
-+ }
-+
-+ __raw_writel(send[0], &npe->regs->in_out_fifo);
-+
-+ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
-+ debug_msg(npe, "NPE input FIFO full\n");
-+ return -EIO;
-+ }
++#if DEBUG_DESC
++ printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
++ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
++ phys, desc->next, desc->buf_len, desc->pkt_len,
++ desc->data, desc->dest_id, desc->src_id, desc->flags,
++ desc->qos, desc->padlen, desc->vlan_tci,
++ desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
++ desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
++ desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
++ desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
++#endif
++}
+
-+ __raw_writel(send[1], &npe->regs->in_out_fifo);
++static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
++{
++#if DEBUG_QUEUES
++ static struct {
++ int queue;
++ char *name;
++ } names[] = {
++ { TX_QUEUE(0x10), "TX#0 " },
++ { TX_QUEUE(0x20), "TX#1 " },
++ { TX_QUEUE(0x00), "TX#2 " },
++ { RXFREE_QUEUE(0x10), "RX-free#0 " },
++ { RXFREE_QUEUE(0x20), "RX-free#1 " },
++ { RXFREE_QUEUE(0x00), "RX-free#2 " },
++ { TXDONE_QUEUE, "TX-done " },
++ };
++ int i;
+
-+ while ((cycles < MAX_RETRIES) &&
-+ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
-+ udelay(1);
-+ cycles++;
-+ }
++ for (i = 0; i < ARRAY_SIZE(names); i++)
++ if (names[i].queue == queue)
++ break;
+
-+ if (cycles == MAX_RETRIES) {
-+ debug_msg(npe, "Timeout sending message\n");
-+ return -ETIMEDOUT;
-+ }
++ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
++ i < ARRAY_SIZE(names) ? names[i].name : "",
++ is_get ? "->" : "<-", phys);
++#endif
++}
+
-+ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
-+ return 0;
++static inline u32 queue_get_entry(unsigned int queue)
++{
++ u32 phys = qmgr_get_entry(queue);
++ debug_queue(queue, 1, phys);
++ return phys;
+}
+
-+int npe_recv_message(struct npe *npe, void *msg, const char *what)
++static inline int queue_get_desc(unsigned int queue, struct port *port,
++ int is_tx)
+{
-+ u32 *recv = msg;
-+ int cycles = 0, cnt = 0;
++ u32 phys, tab_phys, n_desc;
++ struct desc *tab;
+
-+ debug_msg(npe, "Trying to receive message %s\n", what);
++ if (!(phys = queue_get_entry(queue)))
++ return -1;
+
-+ while (cycles < MAX_RETRIES) {
-+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
-+ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
-+ if (cnt == 2)
-+ break;
-+ } else {
-+ udelay(1);
-+ cycles++;
-+ }
-+ }
++ phys &= ~0x1F; /* mask out non-address bits */
++ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
++ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
++ n_desc = (phys - tab_phys) / sizeof(struct desc);
++ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
++ debug_desc(phys, &tab[n_desc]);
++ BUG_ON(tab[n_desc].next);
++ return n_desc;
++}
+
-+ switch(cnt) {
-+ case 1:
-+ debug_msg(npe, "Received [%08X]\n", recv[0]);
-+ break;
-+ case 2:
-+ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
-+ break;
-+ }
++static inline void queue_put_desc(unsigned int queue, u32 phys,
++ struct desc *desc)
++{
++ debug_queue(queue, 0, phys);
++ debug_desc(phys, desc);
++ BUG_ON(phys & 0x1F);
++ qmgr_put_entry(queue, phys);
++ BUG_ON(qmgr_stat_overflow(queue));
++}
+
-+ if (cycles == MAX_RETRIES) {
-+ debug_msg(npe, "Timeout waiting for message\n");
-+ return -ETIMEDOUT;
-+ }
+
-+ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
-+ return 0;
++static inline void dma_unmap_tx(struct port *port, struct desc *desc)
++{
++#ifdef __ARMEB__
++ dma_unmap_single(&port->netdev->dev, desc->data,
++ desc->buf_len, DMA_TO_DEVICE);
++#else
++ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++ ALIGN((desc->data & 3) + desc->buf_len, 4),
++ DMA_TO_DEVICE);
++#endif
+}
+
-+int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
-+{
-+ int result;
-+ u32 *send = msg, recv[2];
+
-+ if ((result = npe_send_message(npe, msg, what)) != 0)
-+ return result;
-+ if ((result = npe_recv_message(npe, recv, what)) != 0)
-+ return result;
++static void eth_rx_irq(void *pdev)
++{
++ struct net_device *dev = pdev;
++ struct port *port = netdev_priv(dev);
+
-+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-+ debug_msg(npe, "Message %s: unexpected message received\n",
-+ what);
-+ return -EIO;
-+ }
-+ return 0;
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
++#endif
++ qmgr_disable_irq(port->plat->rxq);
++ netif_rx_schedule(dev, &port->napi);
+}
+
-+
-+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
++static int eth_poll(struct napi_struct *napi, int budget)
+{
-+ const struct firmware *fw_entry;
++ struct port *port = container_of(napi, struct port, napi);
++ struct net_device *dev = port->netdev;
++ unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
++ int received = 0;
+
-+ struct dl_block {
-+ u32 type;
-+ u32 offset;
-+ } *blk;
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
++#endif
+
-+ struct dl_image {
-+ u32 magic;
-+ u32 id;
-+ u32 size;
-+ union {
-+ u32 data[0];
-+ struct dl_block blocks[0];
-+ };
-+ } *image;
++ while (received < budget) {
++ struct sk_buff *skb;
++ struct desc *desc;
++ int n;
++#ifdef __ARMEB__
++ struct sk_buff *temp;
++ u32 phys;
++#endif
+
-+ struct dl_codeblock {
-+ u32 npe_addr;
-+ u32 size;
-+ u32 data[0];
-+ } *cb;
++ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
++ received = 0; /* No packet received */
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
++ dev->name);
++#endif
++ netif_rx_complete(dev, &port->napi);
++ qmgr_enable_irq(rxq);
++ if (!qmgr_stat_empty(rxq) &&
++ netif_rx_reschedule(dev, &port->napi)) {
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll"
++ " netif_rx_reschedule successed\n",
++ dev->name);
++#endif
++ qmgr_disable_irq(rxq);
++ continue;
++ }
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll all done\n",
++ dev->name);
++#endif
++ return 0; /* all work done */
++ }
+
-+ int i, j, err, data_size, instr_size, blocks, table_end;
-+ u32 cmd;
++ desc = rx_desc_ptr(port, n);
+
-+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
-+ return err;
++#ifdef __ARMEB__
++ if ((skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
++ phys = dma_map_single(&dev->dev, skb->data,
++ MAX_MRU, DMA_FROM_DEVICE);
++ if (dma_mapping_error(phys)) {
++ dev_kfree_skb(skb);
++ skb = NULL;
++ }
++ }
++#else
++ skb = netdev_alloc_skb(dev, desc->pkt_len);
++#endif
+
-+ err = -EINVAL;
-+ if (fw_entry->size < sizeof(struct dl_image)) {
-+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
-+ goto err;
-+ }
-+ image = (struct dl_image*)fw_entry->data;
++ if (!skb) {
++ port->stat.rx_dropped++;
++ /* put the desc back on RX-ready queue */
++ desc->buf_len = MAX_MRU;
++ desc->pkt_len = 0;
++ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++ continue;
++ }
+
-+#if DEBUG_FW
-+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
-+ image->magic, image->id, image->size, image->size * 4);
++ /* process received frame */
++#ifdef __ARMEB__
++ temp = skb;
++ skb = port->rx_buff_tab[n];
++ dma_unmap_single(&dev->dev, desc->data,
++ MAX_MRU, DMA_FROM_DEVICE);
++#else
++ dma_sync_single(&dev->dev, desc->data,
++ MAX_MRU, DMA_FROM_DEVICE);
++ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
++ ALIGN(desc->pkt_len, 4) / 4);
+#endif
++ skb_put(skb, desc->pkt_len);
+
-+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
-+ image->id = swab32(image->id);
-+ image->size = swab32(image->size);
-+ } else if (image->magic != FW_MAGIC) {
-+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
-+ image->magic);
-+ goto err;
-+ }
-+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
-+ print_npe(KERN_ERR, npe,
-+ "inconsistent size of firmware file\n");
-+ goto err;
-+ }
-+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
-+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
-+ goto err;
-+ }
-+ if (image->magic == swab32(FW_MAGIC))
-+ for (i = 0; i < image->size; i++)
-+ image->data[i] = swab32(image->data[i]);
++ debug_pkt(dev, "eth_poll", skb->data, skb->len);
+
-+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
-+ "IXP42x\n");
-+ goto err;
-+ }
++ skb->protocol = eth_type_trans(skb, dev);
++ dev->last_rx = jiffies;
++ port->stat.rx_packets++;
++ port->stat.rx_bytes += skb->len;
++ netif_receive_skb(skb);
+
-+ if (npe_running(npe)) {
-+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
-+ "already running\n");
-+ err = -EBUSY;
-+ goto err;
-+ }
-+#if 0
-+ npe_stop(npe);
-+ npe_reset(npe);
++ /* put the new buffer on RX-free queue */
++#ifdef __ARMEB__
++ port->rx_buff_tab[n] = temp;
++ desc->data = phys;
+#endif
-+
-+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
-+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
-+ (image->id >> 8) & 0xFF, image->id & 0xFF);
-+
-+ if (!cpu_is_ixp46x()) {
-+ if (!npe->id)
-+ instr_size = NPE_A_42X_INSTR_SIZE;
-+ else
-+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
-+ data_size = NPE_42X_DATA_SIZE;
-+ } else {
-+ instr_size = NPE_46X_INSTR_SIZE;
-+ data_size = NPE_46X_DATA_SIZE;
-+ }
-+
-+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
-+ blocks++)
-+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
-+ break;
-+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
-+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
-+ "found\n");
-+ goto err;
++ desc->buf_len = MAX_MRU;
++ desc->pkt_len = 0;
++ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++ received++;
+ }
+
-+#if DEBUG_FW
-+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
++#if DEBUG_RX
++ printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
+#endif
++ return received; /* not all work done */
++}
+
-+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
-+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
-+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
-+ || blk->offset < table_end) {
-+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
-+ "firmware block #%i\n", blk->offset, i);
-+ goto err;
-+ }
+
-+ cb = (struct dl_codeblock*)&image->data[blk->offset];
-+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
-+ if (cb->npe_addr + cb->size > instr_size)
-+ goto too_big;
-+ cmd = CMD_WR_INS_MEM;
-+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
-+ if (cb->npe_addr + cb->size > data_size)
-+ goto too_big;
-+ cmd = CMD_WR_DATA_MEM;
-+ } else {
-+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
-+ "type 0x%X\n", i, blk->type);
-+ goto err;
-+ }
-+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
-+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
-+ "fit in firmware image: type %c, start 0x%X,"
-+ " length 0x%X\n", i,
-+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-+ cb->npe_addr, cb->size);
-+ goto err;
-+ }
++static void eth_txdone_irq(void *unused)
++{
++ u32 phys;
+
-+ for (j = 0; j < cb->size; j++)
-+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
-+ }
++#if DEBUG_TX
++ printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
++#endif
++ while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
++ u32 npe_id, n_desc;
++ struct port *port;
++ struct desc *desc;
++ int start;
+
-+ npe_start(npe);
-+ if (!npe_running(npe))
-+ print_npe(KERN_ERR, npe, "unable to start\n");
-+ release_firmware(fw_entry);
-+ return 0;
++ npe_id = phys & 3;
++ BUG_ON(npe_id >= MAX_NPES);
++ port = npe_port_tab[npe_id];
++ BUG_ON(!port);
++ phys &= ~0x1F; /* mask out non-address bits */
++ n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
++ BUG_ON(n_desc >= TX_DESCS);
++ desc = tx_desc_ptr(port, n_desc);
++ debug_desc(phys, desc);
+
-+too_big:
-+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
-+ "memory: type %c, start 0x%X, length 0x%X\n", i,
-+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-+ cb->npe_addr, cb->size);
-+err:
-+ release_firmware(fw_entry);
-+ return err;
-+}
++ if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
++ port->stat.tx_packets++;
++ port->stat.tx_bytes += desc->pkt_len;
+
++ dma_unmap_tx(port, desc);
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
++ port->netdev->name, port->tx_buff_tab[n_desc]);
++#endif
++ free_buffer_irq(port->tx_buff_tab[n_desc]);
++ port->tx_buff_tab[n_desc] = NULL;
++ }
+
-+struct npe *npe_request(int id)
-+{
-+ if (id < NPE_COUNT)
-+ if (npe_tab[id].valid)
-+ if (try_module_get(THIS_MODULE))
-+ return &npe_tab[id];
-+ return NULL;
++ start = qmgr_stat_empty(port->plat->txreadyq);
++ queue_put_desc(port->plat->txreadyq, phys, desc);
++ if (start) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
++ port->netdev->name);
++#endif
++ netif_wake_queue(port->netdev);
++ }
++ }
+}
+
-+void npe_release(struct npe *npe)
++static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
-+ module_put(THIS_MODULE);
-+}
++ struct port *port = netdev_priv(dev);
++ unsigned int txreadyq = port->plat->txreadyq;
++ int len, offset, bytes, n;
++ void *mem;
++ u32 phys;
++ struct desc *desc;
+
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
++#endif
+
-+static int __init npe_init_module(void)
-+{
++ if (unlikely(skb->len > MAX_MRU)) {
++ dev_kfree_skb(skb);
++ port->stat.tx_errors++;
++ return NETDEV_TX_OK;
++ }
+
-+ int i, found = 0;
++ debug_pkt(dev, "eth_xmit", skb->data, skb->len);
+
-+ for (i = 0; i < NPE_COUNT; i++) {
-+ struct npe *npe = &npe_tab[i];
-+ if (!(ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << i)))
-+ continue; /* NPE already disabled or not present */
-+ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
-+ REGS_SIZE,
-+ npe_name(npe)))) {
-+ print_npe(KERN_ERR, npe,
-+ "failed to request memory region\n");
-+ continue;
-+ }
++ len = skb->len;
++#ifdef __ARMEB__
++ offset = 0; /* no need to keep alignment */
++ bytes = len;
++ mem = skb->data;
++#else
++ offset = (int)skb->data & 3; /* keep 32-bit alignment */
++ bytes = ALIGN(offset + len, 4);
++ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
++ dev_kfree_skb(skb);
++ port->stat.tx_dropped++;
++ return NETDEV_TX_OK;
++ }
++ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
++ dev_kfree_skb(skb);
++#endif
+
-+ if (npe_reset(npe))
-+ continue;
-+ npe->valid = 1;
-+ found++;
++ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++ if (dma_mapping_error(phys)) {
++#ifdef __ARMEB__
++ dev_kfree_skb(skb);
++#else
++ kfree(mem);
++#endif
++ port->stat.tx_dropped++;
++ return NETDEV_TX_OK;
+ }
+
-+ if (!found)
-+ return -ENOSYS;
-+ return 0;
-+}
++ n = queue_get_desc(txreadyq, port, 1);
++ BUG_ON(n < 0);
++ desc = tx_desc_ptr(port, n);
+
-+static void __exit npe_cleanup_module(void)
-+{
-+ int i;
++#ifdef __ARMEB__
++ port->tx_buff_tab[n] = skb;
++#else
++ port->tx_buff_tab[n] = mem;
++#endif
++ desc->data = phys + offset;
++ desc->buf_len = desc->pkt_len = len;
+
-+ for (i = 0; i < NPE_COUNT; i++)
-+ if (npe_tab[i].mem_res) {
-+ npe_reset(&npe_tab[i]);
-+ release_resource(npe_tab[i].mem_res);
-+ }
-+}
-+
-+module_init(npe_init_module);
-+module_exit(npe_cleanup_module);
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_LICENSE("GPL v2");
-+
-+EXPORT_SYMBOL(npe_names);
-+EXPORT_SYMBOL(npe_running);
-+EXPORT_SYMBOL(npe_request);
-+EXPORT_SYMBOL(npe_release);
-+EXPORT_SYMBOL(npe_load_firmware);
-+EXPORT_SYMBOL(npe_send_message);
-+EXPORT_SYMBOL(npe_recv_message);
-+EXPORT_SYMBOL(npe_send_recv_message);
-diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-new file mode 100644
-index 0000000..e833013
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-@@ -0,0 +1,274 @@
-+/*
-+ * Intel IXP4xx Queue Manager driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
++ /* NPE firmware pads short frames with zeros internally */
++ wmb();
++ queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
++ dev->trans_start = jiffies;
+
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <asm/arch/qmgr.h>
++ if (qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
++#endif
++ netif_stop_queue(dev);
++ /* we could miss TX ready interrupt */
++ if (!qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit ready again\n",
++ dev->name);
++#endif
++ netif_wake_queue(dev);
++ }
++ }
+
-+#define DEBUG 0
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
++#endif
++ return NETDEV_TX_OK;
++}
+
-+struct qmgr_regs __iomem *qmgr_regs;
-+static struct resource *mem_res;
-+static spinlock_t qmgr_lock;
-+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-+static void *irq_pdevs[HALF_QUEUES];
+
-+void qmgr_set_irq(unsigned int queue, int src,
-+ void (*handler)(void *pdev), void *pdev)
++static struct net_device_stats *eth_stats(struct net_device *dev)
+{
-+ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-+ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
-+ unsigned long flags;
-+
-+ src &= 7;
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
-+ irq_handlers[queue] = handler;
-+ irq_pdevs[queue] = pdev;
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
++ struct port *port = netdev_priv(dev);
++ return &port->stat;
+}
+
-+
-+static irqreturn_t qmgr_irq1(int irq, void *pdev)
++static void eth_set_mcast_list(struct net_device *dev)
+{
-+ int i;
-+ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-+ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
++ struct port *port = netdev_priv(dev);
++ struct dev_mc_list *mclist = dev->mc_list;
++ u8 diffs[ETH_ALEN], *addr;
++ int cnt = dev->mc_count, i;
+
-+ for (i = 0; i < HALF_QUEUES; i++)
-+ if (val & (1 << i))
-+ irq_handlers[i](irq_pdevs[i]);
++ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
++ __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
++ &port->regs->rx_control[0]);
++ return;
++ }
+
-+ return val ? IRQ_HANDLED : 0;
-+}
++ memset(diffs, 0, ETH_ALEN);
++ addr = mclist->dmi_addr; /* first MAC address */
+
++ while (--cnt && (mclist = mclist->next))
++ for (i = 0; i < ETH_ALEN; i++)
++ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
+
-+void qmgr_enable_irq(unsigned int queue)
-+{
-+ unsigned long flags;
++ for (i = 0; i < ETH_ALEN; i++) {
++ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
++ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
++ }
+
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-+ &qmgr_regs->irqen[0]);
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
++ __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
++ &port->regs->rx_control[0]);
+}
+
-+void qmgr_disable_irq(unsigned int queue)
++
++static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
-+ unsigned long flags;
++ struct port *port = netdev_priv(dev);
++ unsigned int duplex_chg;
++ int err;
+
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-+ &qmgr_regs->irqen[0]);
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
++ if (!netif_running(dev))
++ return -EINVAL;
++ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
++ if (duplex_chg)
++ eth_set_duplex(port);
++ return err;
+}
+
-+static inline void shift_mask(u32 *mask)
-+{
-+ mask[3] = mask[3] << 1 | mask[2] >> 31;
-+ mask[2] = mask[2] << 1 | mask[1] >> 31;
-+ mask[1] = mask[1] << 1 | mask[0] >> 31;
-+ mask[0] <<= 1;
-+}
+
-+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-+ unsigned int nearly_empty_watermark,
-+ unsigned int nearly_full_watermark)
++static int request_queues(struct port *port)
+{
-+ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
+ int err;
+
-+ if (queue >= HALF_QUEUES)
-+ return -ERANGE;
-+
-+ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
-+ return -EINVAL;
-+
-+ switch (len) {
-+ case 16:
-+ cfg = 0 << 24;
-+ mask[0] = 0x1;
-+ break;
-+ case 32:
-+ cfg = 1 << 24;
-+ mask[0] = 0x3;
-+ break;
-+ case 64:
-+ cfg = 2 << 24;
-+ mask[0] = 0xF;
-+ break;
-+ case 128:
-+ cfg = 3 << 24;
-+ mask[0] = 0xFF;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ cfg |= nearly_empty_watermark << 26;
-+ cfg |= nearly_full_watermark << 29;
-+ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
-+ mask[1] = mask[2] = mask[3] = 0;
++ err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
++ if (err)
++ return err;
+
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
++ err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
++ if (err)
++ goto rel_rxfree;
+
-+ spin_lock_irq(&qmgr_lock);
-+ if (__raw_readl(&qmgr_regs->sram[queue])) {
-+ err = -EBUSY;
-+ goto err;
-+ }
++ err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
++ if (err)
++ goto rel_rx;
+
-+ while (1) {
-+ if (!(used_sram_bitmap[0] & mask[0]) &&
-+ !(used_sram_bitmap[1] & mask[1]) &&
-+ !(used_sram_bitmap[2] & mask[2]) &&
-+ !(used_sram_bitmap[3] & mask[3]))
-+ break; /* found free space */
++ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
++ if (err)
++ goto rel_tx;
+
-+ addr++;
-+ shift_mask(mask);
-+ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
-+ printk(KERN_ERR "qmgr: no free SRAM space for"
-+ " queue %i\n", queue);
-+ err = -ENOMEM;
-+ goto err;
-+ }
++ /* TX-done queue handles skbs sent out by the NPEs */
++ if (!ports_open) {
++ err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
++ if (err)
++ goto rel_txready;
+ }
-+
-+ used_sram_bitmap[0] |= mask[0];
-+ used_sram_bitmap[1] |= mask[1];
-+ used_sram_bitmap[2] |= mask[2];
-+ used_sram_bitmap[3] |= mask[3];
-+ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
-+ spin_unlock_irq(&qmgr_lock);
-+
-+#if DEBUG
-+ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
-+ queue, addr);
-+#endif
+ return 0;
+
-+err:
-+ spin_unlock_irq(&qmgr_lock);
-+ module_put(THIS_MODULE);
++rel_txready:
++ qmgr_release_queue(port->plat->txreadyq);
++rel_tx:
++ qmgr_release_queue(TX_QUEUE(port->id));
++rel_rx:
++ qmgr_release_queue(port->plat->rxq);
++rel_rxfree:
++ qmgr_release_queue(RXFREE_QUEUE(port->id));
++ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
++ port->netdev->name);
+ return err;
+}
+
-+void qmgr_release_queue(unsigned int queue)
++static void release_queues(struct port *port)
+{
-+ u32 cfg, addr, mask[4];
-+
-+ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
++ qmgr_release_queue(RXFREE_QUEUE(port->id));
++ qmgr_release_queue(port->plat->rxq);
++ qmgr_release_queue(TX_QUEUE(port->id));
++ qmgr_release_queue(port->plat->txreadyq);
+
-+ spin_lock_irq(&qmgr_lock);
-+ cfg = __raw_readl(&qmgr_regs->sram[queue]);
-+ addr = (cfg >> 14) & 0xFF;
++ if (!ports_open)
++ qmgr_release_queue(TXDONE_QUEUE);
++}
+
-+ BUG_ON(!addr); /* not requested */
++static int init_queues(struct port *port)
++{
++ int i;
+
-+ switch ((cfg >> 24) & 3) {
-+ case 0: mask[0] = 0x1; break;
-+ case 1: mask[0] = 0x3; break;
-+ case 2: mask[0] = 0xF; break;
-+ case 3: mask[0] = 0xFF; break;
++ if (!ports_open)
++ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
++ POOL_ALLOC_SIZE, 32, 0)))
++ return -ENOMEM;
++
++ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
++ &port->desc_tab_phys)))
++ return -ENOMEM;
++ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
++ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
++ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
++
++ /* Setup RX buffers */
++ for (i = 0; i < RX_DESCS; i++) {
++ struct desc *desc = rx_desc_ptr(port, i);
++ buffer_t *buff;
++ void *data;
++#ifdef __ARMEB__
++ if (!(buff = netdev_alloc_skb(port->netdev, MAX_MRU)))
++ return -ENOMEM;
++ data = buff->data;
++#else
++ if (!(buff = kmalloc(MAX_MRU, GFP_KERNEL)))
++ return -ENOMEM;
++ data = buff;
++#endif
++ desc->buf_len = MAX_MRU;
++ desc->data = dma_map_single(&port->netdev->dev, data,
++ MAX_MRU, DMA_FROM_DEVICE);
++ if (dma_mapping_error(desc->data)) {
++ free_buffer(buff);
++ return -EIO;
++ }
++ port->rx_buff_tab[i] = buff;
+ }
+
-+ while (addr--)
-+ shift_mask(mask);
++ return 0;
++}
+
-+ __raw_writel(0, &qmgr_regs->sram[queue]);
++static void destroy_queues(struct port *port)
++{
++ int i;
+
-+ used_sram_bitmap[0] &= ~mask[0];
-+ used_sram_bitmap[1] &= ~mask[1];
-+ used_sram_bitmap[2] &= ~mask[2];
-+ used_sram_bitmap[3] &= ~mask[3];
-+ irq_handlers[queue] = NULL; /* catch IRQ bugs */
-+ spin_unlock_irq(&qmgr_lock);
++ if (port->desc_tab) {
++ for (i = 0; i < RX_DESCS; i++) {
++ struct desc *desc = rx_desc_ptr(port, i);
++ buffer_t *buff = port->rx_buff_tab[i];
++ if (buff) {
++ dma_unmap_single(&port->netdev->dev,
++ desc->data, MAX_MRU,
++ DMA_FROM_DEVICE);
++ free_buffer(buff);
++ }
++ }
++ for (i = 0; i < TX_DESCS; i++) {
++ struct desc *desc = tx_desc_ptr(port, i);
++ buffer_t *buff = port->tx_buff_tab[i];
++ if (buff) {
++ dma_unmap_tx(port, desc);
++ free_buffer(buff);
++ }
++ }
++ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
++ port->desc_tab = NULL;
++ }
+
-+ module_put(THIS_MODULE);
-+#if DEBUG
-+ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
-+#endif
++ if (!ports_open && dma_pool) {
++ dma_pool_destroy(dma_pool);
++ dma_pool = NULL;
++ }
+}
+
-+static int qmgr_init(void)
++static int eth_open(struct net_device *dev)
+{
++ struct port *port = netdev_priv(dev);
++ struct npe *npe = port->npe;
++ struct msg msg;
+ int i, err;
-+ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
-+ IXP4XX_QMGR_REGION_SIZE,
-+ "IXP4xx Queue Manager");
-+ if (mem_res == NULL)
-+ return -EBUSY;
+
-+ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+ if (qmgr_regs == NULL) {
-+ err = -ENOMEM;
-+ goto error_map;
-+ }
++ if (!npe_running(npe)) {
++ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
++ if (err)
++ return err;
+
-+ /* reset qmgr registers */
-+ for (i = 0; i < 4; i++) {
-+ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
-+ __raw_writel(0, &qmgr_regs->irqsrc[i]);
++ if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
++ printk(KERN_ERR "%s: %s not responding\n", dev->name,
++ npe_name(npe));
++ return -EIO;
++ }
+ }
-+ for (i = 0; i < 2; i++) {
-+ __raw_writel(0, &qmgr_regs->stat2[i]);
-+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
-+ __raw_writel(0, &qmgr_regs->irqen[i]);
++
++ mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
++ msg.eth_id = port->id;
++ msg.byte5 = port->plat->rxq | 0x80;
++ msg.byte7 = port->plat->rxq << 4;
++ for (i = 0; i < 8; i++) {
++ msg.byte3 = i;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
++ return -EIO;
+ }
+
-+ for (i = 0; i < QUEUES; i++)
-+ __raw_writel(0, &qmgr_regs->sram[i]);
++ msg.cmd = NPE_EDB_SETPORTADDRESS;
++ msg.eth_id = PHYSICAL_ID(port->id);
++ msg.byte2 = dev->dev_addr[0];
++ msg.byte3 = dev->dev_addr[1];
++ msg.byte4 = dev->dev_addr[2];
++ msg.byte5 = dev->dev_addr[3];
++ msg.byte6 = dev->dev_addr[4];
++ msg.byte7 = dev->dev_addr[5];
++ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
++ return -EIO;
+
-+ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-+ "IXP4xx Queue Manager", NULL);
-+ if (err) {
-+ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-+ IRQ_IXP4XX_QM1);
-+ goto error_irq;
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = NPE_FW_SETFIREWALLMODE;
++ msg.eth_id = port->id;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
++ return -EIO;
++
++ if ((err = request_queues(port)) != 0)
++ return err;
++
++ if ((err = init_queues(port)) != 0) {
++ destroy_queues(port);
++ release_queues(port);
++ return err;
+ }
+
-+ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
-+ spin_lock_init(&qmgr_lock);
++ for (i = 0; i < ETH_ALEN; i++)
++ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
++ __raw_writel(0x08, &port->regs->random_seed);
++ __raw_writel(0x12, &port->regs->partial_empty_threshold);
++ __raw_writel(0x30, &port->regs->partial_full_threshold);
++ __raw_writel(0x08, &port->regs->tx_start_bytes);
++ __raw_writel(0x15, &port->regs->tx_deferral);
++ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
++ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
++ __raw_writel(0x80, &port->regs->slot_time);
++ __raw_writel(0x01, &port->regs->int_clock_threshold);
+
-+ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
-+ return 0;
++ /* Populate queues with buffers, no failure after this point */
++ for (i = 0; i < TX_DESCS; i++)
++ queue_put_desc(port->plat->txreadyq,
++ tx_desc_phys(port, i), tx_desc_ptr(port, i));
+
-+error_irq:
-+ iounmap(qmgr_regs);
-+error_map:
-+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+ return err;
++ for (i = 0; i < RX_DESCS; i++)
++ queue_put_desc(RXFREE_QUEUE(port->id),
++ rx_desc_phys(port, i), rx_desc_ptr(port, i));
++
++ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
++ __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
++ __raw_writel(0, &port->regs->rx_control[1]);
++ __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
++
++ napi_enable(&port->napi); /* check location of this call */
++
++ phy_check_media(port, 1);
++ eth_set_mcast_list(dev);
++ netif_start_queue(dev);
++ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++
++ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
++ eth_rx_irq, dev);
++ if (!ports_open) {
++ qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
++ eth_txdone_irq, NULL);
++ qmgr_enable_irq(TXDONE_QUEUE);
++ }
++ ports_open++;
++ netif_rx_schedule(dev, &port->napi); /* we may already have RX data, enables IRQ */
++ return 0;
+}
+
-+static void qmgr_remove(void)
++static int eth_close(struct net_device *dev)
+{
-+ free_irq(IRQ_IXP4XX_QM1, NULL);
-+ synchronize_irq(IRQ_IXP4XX_QM1);
-+ iounmap(qmgr_regs);
-+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+}
++ struct port *port = netdev_priv(dev);
++ struct msg msg;
++ int buffs = RX_DESCS; /* allocated RX buffers */
++ int i;
+
-+module_init(qmgr_init);
-+module_exit(qmgr_remove);
++ ports_open--;
++ qmgr_disable_irq(port->plat->rxq);
++ netif_stop_queue(dev);
+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Krzysztof Halasa");
++ while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
++ buffs--;
+
-+EXPORT_SYMBOL(qmgr_regs);
-+EXPORT_SYMBOL(qmgr_set_irq);
-+EXPORT_SYMBOL(qmgr_enable_irq);
-+EXPORT_SYMBOL(qmgr_disable_irq);
-+EXPORT_SYMBOL(qmgr_request_queue);
-+EXPORT_SYMBOL(qmgr_release_queue);
-diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
-index f9cc2b6..9274d3f 100644
---- a/drivers/net/arm/Kconfig
-+++ b/drivers/net/arm/Kconfig
-@@ -47,3 +47,13 @@ config EP93XX_ETH
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = NPE_SETLOOPBACK_MODE;
++ msg.eth_id = port->id;
++ msg.byte3 = 1;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
++ printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
+
-+config IXP4XX_ETH
-+ tristate "IXP4xx Ethernet support"
-+ depends on NET_ETHERNET && ARM && ARCH_IXP4XX
-+ select IXP4XX_NPE
-+ select IXP4XX_QMGR
-+ select MII
++ i = 0;
++ do { /* drain RX buffers */
++ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
++ buffs--;
++ if (!buffs)
++ break;
++ if (qmgr_stat_empty(TX_QUEUE(port->id))) {
++ /* we have to inject some packet */
++ struct desc *desc;
++ u32 phys;
++ int n = queue_get_desc(port->plat->txreadyq, port, 1);
++ BUG_ON(n < 0);
++ desc = tx_desc_ptr(port, n);
++ phys = tx_desc_phys(port, n);
++ desc->buf_len = desc->pkt_len = 1;
++ wmb();
++ queue_put_desc(TX_QUEUE(port->id), phys, desc);
++ }
++ udelay(1);
++ } while (++i < MAX_CLOSE_WAIT);
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
++ " left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++ if (!buffs)
++ printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
++#endif
++
++ buffs = TX_DESCS;
++ while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
++ buffs--; /* cancel TX */
++
++ i = 0;
++ do {
++ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
++ buffs--;
++ if (!buffs)
++ break;
++ } while (++i < MAX_CLOSE_WAIT);
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
++ "left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++ if (!buffs)
++ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
++#endif
++
++ msg.byte3 = 0;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
++ printk(KERN_CRIT "%s: unable to disable loopback\n",
++ dev->name);
++
++ port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
++ ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
++ mdio_write(dev, port->plat->phy, MII_BMCR,
++ port->mii_bmcr | BMCR_PDOWN);
++
++ if (!ports_open)
++ qmgr_disable_irq(TXDONE_QUEUE);
++ cancel_rearming_delayed_work(&port->mdio_thread);
++ napi_disable(&port->napi);
++ destroy_queues(port);
++ release_queues(port);
++ return 0;
++}
++
++static int __devinit eth_init_one(struct platform_device *pdev)
++{
++ struct port *port;
++ struct net_device *dev;
++ struct eth_plat_info *plat = pdev->dev.platform_data;
++ u32 regs_phys;
++ int err;
++
++ if (!(dev = alloc_etherdev(sizeof(struct port))))
++ return -ENOMEM;
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++ port = netdev_priv(dev);
++ port->netdev = dev;
++ port->id = pdev->id;
++
++ switch (port->id) {
++ case IXP4XX_ETH_NPEA:
++ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
++ regs_phys = IXP4XX_EthA_BASE_PHYS;
++ break;
++ case IXP4XX_ETH_NPEB:
++ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
++ regs_phys = IXP4XX_EthB_BASE_PHYS;
++ break;
++ case IXP4XX_ETH_NPEC:
++ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
++ regs_phys = IXP4XX_EthC_BASE_PHYS;
++ break;
++ default:
++ err = -ENOSYS;
++ goto err_free;
++ }
++
++ dev->open = eth_open;
++ dev->hard_start_xmit = eth_xmit;
++ dev->stop = eth_close;
++ dev->get_stats = eth_stats;
++ dev->do_ioctl = eth_ioctl;
++ dev->set_multicast_list = eth_set_mcast_list;
++ dev->tx_queue_len = 100;
++
++ netif_napi_add(dev, &port->napi, eth_poll, ETH_NAPI_WEIGHT);
++
++ if (!(port->npe = npe_request(NPE_ID(port->id)))) {
++ err = -EIO;
++ goto err_free;
++ }
++
++ if (register_netdev(dev)) {
++ err = -EIO;
++ goto err_npe_rel;
++ }
++
++ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
++ if (!port->mem_res) {
++ err = -EBUSY;
++ goto err_unreg;
++ }
++
++ port->plat = plat;
++ npe_port_tab[NPE_ID(port->id)] = port;
++ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
++
++ platform_set_drvdata(pdev, dev);
++
++ __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
++ &port->regs->core_control);
++ udelay(50);
++ __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
++ udelay(50);
++
++ port->mii.dev = dev;
++ port->mii.mdio_read = mdio_read;
++ port->mii.mdio_write = mdio_write;
++ port->mii.phy_id = plat->phy;
++ port->mii.phy_id_mask = 0x1F;
++ port->mii.reg_num_mask = 0x1F;
++
++ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
++ npe_name(port->npe));
++
++ phy_reset(dev, plat->phy);
++ port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
++ ~(BMCR_RESET | BMCR_PDOWN);
++ mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
++
++ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
++ return 0;
++
++err_unreg:
++ unregister_netdev(dev);
++err_npe_rel:
++ npe_release(port->npe);
++err_free:
++ free_netdev(dev);
++ return err;
++}
++
++static int __devexit eth_remove_one(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct port *port = netdev_priv(dev);
++
++ unregister_netdev(dev);
++ npe_port_tab[NPE_ID(port->id)] = NULL;
++ platform_set_drvdata(pdev, NULL);
++ npe_release(port->npe);
++ release_resource(port->mem_res);
++ free_netdev(dev);
++ return 0;
++}
++
++static struct platform_driver drv = {
++ .driver.name = DRV_NAME,
++ .probe = eth_init_one,
++ .remove = eth_remove_one,
++};
++
++static int __init eth_init_module(void)
++{
++ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
++ return -ENOSYS;
++
++ /* All MII PHY accesses use NPE-B Ethernet registers */
++ spin_lock_init(&mdio_lock);
++ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
++ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
++
++ return platform_driver_register(&drv);
++}
++
++static void __exit eth_cleanup_module(void)
++{
++ platform_driver_unregister(&drv);
++}
++
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
++MODULE_LICENSE("GPL v2");
++module_init(eth_init_module);
++module_exit(eth_cleanup_module);
+diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
+index a3df09e..94e7aa7 100644
+--- a/drivers/net/wan/Kconfig
++++ b/drivers/net/wan/Kconfig
+@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
+
+ Say Y if your card supports this feature.
+
++config IXP4XX_HSS
++ tristate "IXP4xx HSS (synchronous serial port) support"
++ depends on HDLC && ARM && ARCH_IXP4XX
++ select IXP4XX_NPE
++ select IXP4XX_QMGR
+ help
-+ Say Y here if you want to use built-in Ethernet ports
++ Say Y here if you want to use built-in HSS ports
+ on IXP4xx processor.
-diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
-index a4c8682..7c812ac 100644
---- a/drivers/net/arm/Makefile
-+++ b/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
- obj-$(CONFIG_ARM_ETHER1) += ether1.o
- obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
- obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
-+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
-diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
++
+ config DLCI
+ tristate "Frame Relay DLCI support"
+ ---help---
+diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
+index d61fef3..1b1d116 100644
+--- a/drivers/net/wan/Makefile
++++ b/drivers/net/wan/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
+ obj-$(CONFIG_WANXL) += wanxl.o
+ obj-$(CONFIG_PCI200SYN) += pci200syn.o
+ obj-$(CONFIG_PC300TOO) += pc300too.o
++obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
+
+ clean-files := wanxlfw.inc
+ $(obj)/wanxl.o: $(obj)/wanxlfw.inc
+diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
new file mode 100644
-index 0000000..2c23f50
+index 0000000..c4cdace
--- /dev/null
-+++ b/drivers/net/arm/ixp4xx_eth.c
-@@ -0,0 +1,1259 @@
++++ b/drivers/net/wan/ixp4xx_hss.c
+@@ -0,0 +1,1270 @@
+/*
-+ * Intel IXP4xx Ethernet driver for Linux
++ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
-+ *
-+ * Ethernet port config (0x00 is not present on IXP42X):
-+ *
-+ * logical port 0x00 0x10 0x20
-+ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
-+ * physical PortId 2 0 1
-+ * TX queue 23 24 25
-+ * RX-free queue 26 27 28
-+ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
-+ *
-+ *
-+ * Queue entries:
-+ * bits 0 -> 1 - NPE ID (RX and TX-done)
-+ * bits 0 -> 2 - priority (TX, per 802.1D)
-+ * bits 3 -> 4 - port ID (user-set?)
-+ * bits 5 -> 31 - physical descriptor address
+ */
+
-+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
-+#include <linux/etherdevice.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
-+#include <linux/mii.h>
++#include <linux/hdlc.h>
+#include <linux/platform_device.h>
+#include <asm/arch/npe.h>
+#include <asm/arch/qmgr.h>
+#define DEBUG_RX 0
+#define DEBUG_TX 0
+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_MDIO 0
+#define DEBUG_CLOSE 0
+
-+#define DRV_NAME "ixp4xx_eth"
++#define DRV_NAME "ixp4xx_hss"
+
-+#define MAX_NPES 3
++#define PKT_EXTRA_FLAGS 0 /* orig 1 */
++#define FRAME_SYNC_OFFSET 0 /* unused, channelized only */
++#define FRAME_SYNC_SIZE 1024
++#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
++#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
+
-+#define RX_DESCS 64 /* also length of all RX queues */
++#define RX_DESCS 16 /* also length of all RX queues */
+#define TX_DESCS 16 /* also length of all TX queues */
-+#define TXDONE_QUEUE_LEN 64 /* dwords */
+
+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define REGS_SIZE 0x1000
-+#define MAX_MRU 1536 /* 0x600 */
++#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
++#define MAX_CLOSE_WAIT 1000 /* microseconds */
+
-+#define MDIO_INTERVAL (3 * HZ)
-+#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
-+#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
++/* Queue IDs */
++#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
++#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
++#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
++#define HSS0_PKT_TX1_QUEUE 15
++#define HSS0_PKT_TX2_QUEUE 16
++#define HSS0_PKT_TX3_QUEUE 17
++#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
++#define HSS0_PKT_RXFREE1_QUEUE 19
++#define HSS0_PKT_RXFREE2_QUEUE 20
++#define HSS0_PKT_RXFREE3_QUEUE 21
++#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
+
-+#define NPE_ID(port_id) ((port_id) >> 4)
-+#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3)
-+#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23)
-+#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26)
-+#define TXDONE_QUEUE 31
++#define HSS1_CHL_RXTRIG_QUEUE 10
++#define HSS1_PKT_RX_QUEUE 0
++#define HSS1_PKT_TX0_QUEUE 5
++#define HSS1_PKT_TX1_QUEUE 6
++#define HSS1_PKT_TX2_QUEUE 7
++#define HSS1_PKT_TX3_QUEUE 8
++#define HSS1_PKT_RXFREE0_QUEUE 1
++#define HSS1_PKT_RXFREE1_QUEUE 2
++#define HSS1_PKT_RXFREE2_QUEUE 3
++#define HSS1_PKT_RXFREE3_QUEUE 4
++#define HSS1_PKT_TXDONE_QUEUE 9
++
++#define NPE_PKT_MODE_HDLC 0
++#define NPE_PKT_MODE_RAW 1
++#define NPE_PKT_MODE_56KMODE 2
++#define NPE_PKT_MODE_56KENDIAN_MSB 4
++
++/* PKT_PIPE_HDLC_CFG_WRITE flags */
++#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
++#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
++#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
++
++
++/* hss_config, PCRs */
++/* Frame sync sampling, default = active low */
++#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
++#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
++#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
++
++/* Frame sync pin: input (default) or output generated off a given clk edge */
++#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
++#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
++
++/* Frame and data clock sampling on edge, default = falling */
++#define PCR_FCLK_EDGE_RISING 0x08000000
++#define PCR_DCLK_EDGE_RISING 0x04000000
++
++/* Clock direction, default = input */
++#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
++
++/* Generate/Receive frame pulses, default = enabled */
++#define PCR_FRM_PULSE_DISABLED 0x01000000
++
++ /* Data rate is full (default) or half the configured clk speed */
++#define PCR_HALF_CLK_RATE 0x00200000
++
++/* Invert data between NPE and HSS FIFOs? (default = no) */
++#define PCR_DATA_POLARITY_INVERT 0x00100000
++
++/* TX/RX endianness, default = LSB */
++#define PCR_MSB_ENDIAN 0x00080000
++
++/* Normal (default) / open drain mode (TX only) */
++#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
++
++/* No framing bit transmitted and expected on RX? (default = framing bit) */
++#define PCR_SOF_NO_FBIT 0x00020000
++
++/* Drive data pins? */
++#define PCR_TX_DATA_ENABLE 0x00010000
++
++/* Voice 56k type: drive the data pins low (default), high, high Z */
++#define PCR_TX_V56K_HIGH 0x00002000
++#define PCR_TX_V56K_HIGH_IMP 0x00004000
++
++/* Unassigned type: drive the data pins low (default), high, high Z */
++#define PCR_TX_UNASS_HIGH 0x00000800
++#define PCR_TX_UNASS_HIGH_IMP 0x00001000
++
++/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
++#define PCR_TX_FB_HIGH_IMP 0x00000400
++
++/* 56k data endiannes - which bit unused: high (default) or low */
++#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
++
++/* 56k data transmission type: 32/8 bit data (default) or 56K data */
++#define PCR_TX_56KS_56K_DATA 0x00000100
++
++/* hss_config, cCR */
++/* Number of packetized clients, default = 1 */
++#define CCR_NPE_HFIFO_2_HDLC 0x04000000
++#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
++
++/* default = no loopback */
++#define CCR_LOOPBACK 0x02000000
++
++/* HSS number, default = 0 (first) */
++#define CCR_SECOND_HSS 0x01000000
++
++
++/* hss_config, clkCR: main:10, num:10, denom:12 */
++#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
++
++#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
++#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
++#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
++#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
++#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
++#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
++
++#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
++#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
++#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
++#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
++#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
++#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
++
++
++/* hss_config, LUT entries */
++#define TDMMAP_UNASSIGNED 0
++#define TDMMAP_HDLC 1 /* HDLC - packetized */
++#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
++#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
++
++#define TIMESLOTS 128
++#define LUT_BITS 2
++
++/* offsets into HSS config */
++#define HSS_CONFIG_TX_PCR 0x00
++#define HSS_CONFIG_RX_PCR 0x04
++#define HSS_CONFIG_CORE_CR 0x08
++#define HSS_CONFIG_CLOCK_CR 0x0C
++#define HSS_CONFIG_TX_FCR 0x10
++#define HSS_CONFIG_RX_FCR 0x14
++#define HSS_CONFIG_TX_LUT 0x18
++#define HSS_CONFIG_RX_LUT 0x38
+
-+/* TX Control Registers */
-+#define TX_CNTRL0_TX_EN 0x01
-+#define TX_CNTRL0_HALFDUPLEX 0x02
-+#define TX_CNTRL0_RETRY 0x04
-+#define TX_CNTRL0_PAD_EN 0x08
-+#define TX_CNTRL0_APPEND_FCS 0x10
-+#define TX_CNTRL0_2DEFER 0x20
-+#define TX_CNTRL0_RMII 0x40 /* reduced MII */
-+#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
+
-+/* RX Control Registers */
-+#define RX_CNTRL0_RX_EN 0x01
-+#define RX_CNTRL0_PADSTRIP_EN 0x02
-+#define RX_CNTRL0_SEND_FCS 0x04
-+#define RX_CNTRL0_PAUSE_EN 0x08
-+#define RX_CNTRL0_LOOP_EN 0x10
-+#define RX_CNTRL0_ADDR_FLTR_EN 0x20
-+#define RX_CNTRL0_RX_RUNT_EN 0x40
-+#define RX_CNTRL0_BCAST_DIS 0x80
-+#define RX_CNTRL1_DEFER_EN 0x01
++/* NPE command codes */
++/* writes the ConfigWord value to the location specified by offset */
++#define PORT_CONFIG_WRITE 0x40
+
-+/* Core Control Register */
-+#define CORE_RESET 0x01
-+#define CORE_RX_FIFO_FLUSH 0x02
-+#define CORE_TX_FIFO_FLUSH 0x04
-+#define CORE_SEND_JAM 0x08
-+#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */
++/* triggers the NPE to load the contents of the configuration table */
++#define PORT_CONFIG_LOAD 0x41
+
-+#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \
-+ TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
-+ TX_CNTRL0_2DEFER)
-+#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN
-+#define DEFAULT_CORE_CNTRL CORE_MDC_EN
++/* triggers the NPE to return an HssErrorReadResponse message */
++#define PORT_ERROR_READ 0x42
+
++/* reset NPE internal status and enable the HssChannelized operation */
++#define CHAN_FLOW_ENABLE 0x43
++#define CHAN_FLOW_DISABLE 0x44
++#define CHAN_IDLE_PATTERN_WRITE 0x45
++#define CHAN_NUM_CHANS_WRITE 0x46
++#define CHAN_RX_BUF_ADDR_WRITE 0x47
++#define CHAN_RX_BUF_CFG_WRITE 0x48
++#define CHAN_TX_BLK_CFG_WRITE 0x49
++#define CHAN_TX_BUF_ADDR_WRITE 0x4A
++#define CHAN_TX_BUF_SIZE_WRITE 0x4B
++#define CHAN_TSLOTSWITCH_ENABLE 0x4C
++#define CHAN_TSLOTSWITCH_DISABLE 0x4D
+
-+/* NPE message codes */
-+#define NPE_GETSTATUS 0x00
-+#define NPE_EDB_SETPORTADDRESS 0x01
-+#define NPE_EDB_GETMACADDRESSDATABASE 0x02
-+#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
-+#define NPE_GETSTATS 0x04
-+#define NPE_RESETSTATS 0x05
-+#define NPE_SETMAXFRAMELENGTHS 0x06
-+#define NPE_VLAN_SETRXTAGMODE 0x07
-+#define NPE_VLAN_SETDEFAULTRXVID 0x08
-+#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
-+#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
-+#define NPE_VLAN_SETRXQOSENTRY 0x0B
-+#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
-+#define NPE_STP_SETBLOCKINGSTATE 0x0D
-+#define NPE_FW_SETFIREWALLMODE 0x0E
-+#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
-+#define NPE_PC_SETAPMACTABLE 0x11
-+#define NPE_SETLOOPBACK_MODE 0x12
-+#define NPE_PC_SETBSSIDTABLE 0x13
-+#define NPE_ADDRESS_FILTER_CONFIG 0x14
-+#define NPE_APPENDFCSCONFIG 0x15
-+#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
-+#define NPE_MAC_RECOVERY_START 0x17
++/* downloads the gainWord value for a timeslot switching channel associated
++ with bypassNum */
++#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
++
++/* triggers the NPE to reset internal status and enable the HssPacketized
++ operation for the flow specified by pPipe */
++#define PKT_PIPE_FLOW_ENABLE 0x50
++#define PKT_PIPE_FLOW_DISABLE 0x51
++#define PKT_NUM_PIPES_WRITE 0x52
++#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
++#define PKT_PIPE_HDLC_CFG_WRITE 0x54
++#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
++#define PKT_PIPE_RX_SIZE_WRITE 0x56
++#define PKT_PIPE_MODE_WRITE 0x57
++
++/* HDLC packet status values - desc->status */
++#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
++#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
++#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
++#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
++ this packet (if buf_len < pkt_len) */
++#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
++#define ERR_HDLC_ABORT 6 /* abort sequence received */
++#define ERR_DISCONNECTING 7 /* disconnect is in progress */
+
+
+#ifdef __ARMEB__
+#define free_buffer_irq kfree
+#endif
+
-+struct eth_regs {
-+ u32 tx_control[2], __res1[2]; /* 000 */
-+ u32 rx_control[2], __res2[2]; /* 010 */
-+ u32 random_seed, __res3[3]; /* 020 */
-+ u32 partial_empty_threshold, __res4; /* 030 */
-+ u32 partial_full_threshold, __res5; /* 038 */
-+ u32 tx_start_bytes, __res6[3]; /* 040 */
-+ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
-+ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
-+ u32 slot_time, __res9[3]; /* 070 */
-+ u32 mdio_command[4]; /* 080 */
-+ u32 mdio_status[4]; /* 090 */
-+ u32 mcast_mask[6], __res10[2]; /* 0A0 */
-+ u32 mcast_addr[6], __res11[2]; /* 0C0 */
-+ u32 int_clock_threshold, __res12[3]; /* 0E0 */
-+ u32 hw_addr[6], __res13[61]; /* 0F0 */
-+ u32 core_control; /* 1FC */
-+};
-+
+struct port {
-+ struct resource *mem_res;
-+ struct eth_regs __iomem *regs;
+ struct npe *npe;
+ struct net_device *netdev;
-+ struct net_device_stats stat;
-+ struct mii_if_info mii;
-+ struct delayed_work mdio_thread;
-+ struct eth_plat_info *plat;
++ struct hss_plat_info *plat;
+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
+ struct desc *desc_tab; /* coherent */
+ u32 desc_tab_phys;
-+ int id; /* logical port ID */
-+ u16 mii_bmcr;
++ int id;
++ unsigned int clock_type, clock_rate, loopback;
++ u8 hdlc_cfg;
+};
+
+/* NPE message structure */
+struct msg {
+#ifdef __ARMEB__
-+ u8 cmd, eth_id, byte2, byte3;
-+ u8 byte4, byte5, byte6, byte7;
++ u8 cmd, unused, hss_port, index;
++ union {
++ struct { u8 data8a, data8b, data8c, data8d; };
++ struct { u16 data16a, data16b; };
++ struct { u32 data32; };
++ };
+#else
-+ u8 byte3, byte2, eth_id, cmd;
-+ u8 byte7, byte6, byte5, byte4;
++ u8 index, hss_port, unused, cmd;
++ union {
++ struct { u8 data8d, data8c, data8b, data8a; };
++ struct { u16 data16b, data16a; };
++ struct { u32 data32; };
++ };
+#endif
+};
+
-+/* Ethernet packet descriptor */
++/* HDLC packet descriptor */
+struct desc {
+ u32 next; /* pointer to next buffer, unused */
+
-+#ifdef __ARMEB__
-+ u16 buf_len; /* buffer length */
-+ u16 pkt_len; /* packet length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u8 dest_id;
-+ u8 src_id;
-+ u16 flags;
-+ u8 qos;
-+ u8 padlen;
-+ u16 vlan_tci;
-+#else
-+ u16 pkt_len; /* packet length */
-+ u16 buf_len; /* buffer length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u16 flags;
-+ u8 src_id;
-+ u8 dest_id;
-+ u16 vlan_tci;
-+ u8 padlen;
-+ u8 qos;
-+#endif
-+
-+#ifdef __ARMEB__
-+ u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
-+ u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
-+ u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
-+#else
-+ u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
-+ u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
-+ u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
-+#endif
-+};
-+
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static spinlock_t mdio_lock;
-+static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
-+static int ports_open;
-+static struct port *npe_port_tab[MAX_NPES];
-+static struct dma_pool *dma_pool;
-+
-+
-+static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
-+ int write, u16 cmd)
-+{
-+ int cycles = 0;
-+
-+ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
-+ printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
-+ return 0;
-+ }
-+
-+ if (write) {
-+ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
-+ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
-+ }
-+ __raw_writel(((phy_id << 5) | location) & 0xFF,
-+ &mdio_regs->mdio_command[2]);
-+ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
-+ &mdio_regs->mdio_command[3]);
-+
-+ while ((cycles < MAX_MDIO_RETRIES) &&
-+ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ if (cycles == MAX_MDIO_RETRIES) {
-+ printk(KERN_ERR "%s: MII write failed\n", dev->name);
-+ return 0;
-+ }
-+
-+#if DEBUG_MDIO
-+ printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
-+ cycles);
-+#endif
-+
-+ if (write)
-+ return 0;
-+
-+ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
-+ printk(KERN_ERR "%s: MII read failed\n", dev->name);
-+ return 0;
-+ }
-+
-+ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
-+ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
-+}
-+
-+static int mdio_read(struct net_device *dev, int phy_id, int location)
-+{
-+ unsigned long flags;
-+ u16 val;
-+
-+ spin_lock_irqsave(&mdio_lock, flags);
-+ val = mdio_cmd(dev, phy_id, location, 0, 0);
-+ spin_unlock_irqrestore(&mdio_lock, flags);
-+ return val;
-+}
++#ifdef __ARMEB__
++ u16 buf_len; /* buffer length */
++ u16 pkt_len; /* packet length */
++ u32 data; /* pointer to data buffer in RAM */
++ u8 status;
++ u8 error_count;
++ u16 __reserved;
++#else
++ u16 pkt_len; /* packet length */
++ u16 buf_len; /* buffer length */
++ u32 data; /* pointer to data buffer in RAM */
++ u16 __reserved;
++ u8 error_count;
++ u8 status;
++#endif
++ u32 __reserved1[4];
++};
+
-+static void mdio_write(struct net_device *dev, int phy_id, int location,
-+ int val)
-+{
-+ unsigned long flags;
+
-+ spin_lock_irqsave(&mdio_lock, flags);
-+ mdio_cmd(dev, phy_id, location, 1, val);
-+ spin_unlock_irqrestore(&mdio_lock, flags);
-+}
++#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
+
-+static void phy_reset(struct net_device *dev, int phy_id)
-+{
-+ struct port *port = netdev_priv(dev);
-+ int cycles = 0;
++#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
+
-+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
-+
-+ while (cycles < MAX_MII_RESET_RETRIES) {
-+ if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-+#if DEBUG_MDIO
-+ printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
-+ dev->name, cycles);
-+#endif
-+ return;
-+ }
-+ udelay(1);
-+ cycles++;
-+ }
++/*****************************************************************************
++ * global variables
++ ****************************************************************************/
+
-+ printk(KERN_ERR "%s: MII reset failed\n", dev->name);
-+}
++static int ports_open;
++static struct dma_pool *dma_pool;
+
-+static void eth_set_duplex(struct port *port)
-+{
-+ if (port->mii.full_duplex)
-+ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
-+ &port->regs->tx_control[0]);
-+ else
-+ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
-+ &port->regs->tx_control[0]);
-+}
++static const struct {
++ int tx, txdone, rx, rxfree;
++}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
++ HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
++ { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
++ HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
++};
+
++/*****************************************************************************
++ * utility functions
++ ****************************************************************************/
+
-+static void phy_check_media(struct port *port, int init)
++static inline struct port* dev_to_port(struct net_device *dev)
+{
-+ if (mii_check_media(&port->mii, 1, init))
-+ eth_set_duplex(port);
-+ if (port->mii.force_media) { /* mii_check_media() doesn't work */
-+ struct net_device *dev = port->netdev;
-+ int cur_link = mii_link_ok(&port->mii);
-+ int prev_link = netif_carrier_ok(dev);
-+
-+ if (!prev_link && cur_link) {
-+ printk(KERN_INFO "%s: link up\n", dev->name);
-+ netif_carrier_on(dev);
-+ } else if (prev_link && !cur_link) {
-+ printk(KERN_INFO "%s: link down\n", dev->name);
-+ netif_carrier_off(dev);
-+ }
-+ }
++ return dev_to_hdlc(dev)->priv;
+}
+
-+
-+static void mdio_thread(struct work_struct *work)
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
+{
-+ struct port *port = container_of(work, struct port, mdio_thread.work);
-+
-+ phy_check_media(port, 0);
-+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++ int i;
++ for (i = 0; i < cnt; i++)
++ dest[i] = swab32(src[i]);
+}
-+
++#endif
+
+static inline void debug_pkt(struct net_device *dev, const char *func,
+ u8 *data, int len)
+ for (i = 0; i < len; i++) {
+ if (i >= DEBUG_PKT_BYTES)
+ break;
-+ printk("%s%02X",
-+ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
-+ data[i]);
++ printk("%s%02X", !(i % 4) ? " " : "", data[i]);
+ }
+ printk("\n");
+#endif
+static inline void debug_desc(u32 phys, struct desc *desc)
+{
+#if DEBUG_DESC
-+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
-+ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
++ printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
+ phys, desc->next, desc->buf_len, desc->pkt_len,
-+ desc->data, desc->dest_id, desc->src_id, desc->flags,
-+ desc->qos, desc->padlen, desc->vlan_tci,
-+ desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
-+ desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
-+ desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
-+ desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
++ desc->data, desc->status, desc->error_count);
+#endif
+}
+
+ int queue;
+ char *name;
+ } names[] = {
-+ { TX_QUEUE(0x10), "TX#0 " },
-+ { TX_QUEUE(0x20), "TX#1 " },
-+ { TX_QUEUE(0x00), "TX#2 " },
-+ { RXFREE_QUEUE(0x10), "RX-free#0 " },
-+ { RXFREE_QUEUE(0x20), "RX-free#1 " },
-+ { RXFREE_QUEUE(0x00), "RX-free#2 " },
-+ { TXDONE_QUEUE, "TX-done " },
++ { HSS0_PKT_TX0_QUEUE, "TX#0 " },
++ { HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
++ { HSS0_PKT_RX_QUEUE, "RX#0 " },
++ { HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
++ { HSS1_PKT_TX0_QUEUE, "TX#1 " },
++ { HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
++ { HSS1_PKT_RX_QUEUE, "RX#1 " },
++ { HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
+ };
+ int i;
+
+ if (!(phys = queue_get_entry(queue)))
+ return -1;
+
-+ phys &= ~0x1F; /* mask out non-address bits */
++ BUG_ON(phys & 0x1F);
+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
+ n_desc = (phys - tab_phys) / sizeof(struct desc);
+}
+
+
-+static void eth_rx_irq(void *pdev)
++static void hss_hdlc_set_carrier(void *pdev, int carrier)
+{
+ struct net_device *dev = pdev;
-+ struct port *port = netdev_priv(dev);
++ if (carrier)
++ netif_carrier_on(dev);
++ else
++ netif_carrier_off(dev);
++}
++
++static void hss_hdlc_rx_irq(void *pdev)
++{
++ struct net_device *dev = pdev;
++ struct port *port = dev_to_port(dev);
+
+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
+#endif
-+ qmgr_disable_irq(port->plat->rxq);
++ qmgr_disable_irq(queue_ids[port->id].rx);
+ netif_rx_schedule(dev);
+}
+
-+static int eth_poll(struct net_device *dev, int *budget)
++static int hss_hdlc_poll(struct net_device *dev, int *budget)
+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
++ struct port *port = dev_to_port(dev);
++ unsigned int rxq = queue_ids[port->id].rx;
++ unsigned int rxfreeq = queue_ids[port->id].rxfree;
++ struct net_device_stats *stats = hdlc_stats(dev);
+ int quota = dev->quota, received = 0;
+
+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
+#endif
+
+ while (quota) {
+ *budget -= received;
+ received = 0;
+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
-+ dev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_poll"
++ " netif_rx_complete\n", dev->name);
+#endif
+ netif_rx_complete(dev);
+ qmgr_enable_irq(rxq);
+ if (!qmgr_stat_empty(rxq) &&
+ netif_rx_reschedule(dev, 0)) {
+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll"
++ printk(KERN_DEBUG "%s: hss_hdlc_poll"
+ " netif_rx_reschedule successed\n",
+ dev->name);
+#endif
+ continue;
+ }
+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll all done\n",
++ printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
+ dev->name);
+#endif
+ return 0; /* all work done */
+
+ desc = rx_desc_ptr(port, n);
+
++ if (desc->error_count) /* FIXME - remove printk */
++ printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
++ " errors %u\n", dev->name, desc->status,
++ desc->error_count);
++
++ skb = NULL;
++ switch (desc->status) {
++ case 0:
+#ifdef __ARMEB__
-+ if ((skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
-+ phys = dma_map_single(&dev->dev, skb->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+ dev_kfree_skb(skb);
-+ skb = NULL;
++ if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
++ phys = dma_map_single(&dev->dev, skb->data,
++ RX_SIZE,
++ DMA_FROM_DEVICE);
++ if (dma_mapping_error(phys)) {
++ dev_kfree_skb(skb);
++ skb = NULL;
++ }
+ }
-+ }
+#else
-+ skb = netdev_alloc_skb(dev, desc->pkt_len);
++ skb = netdev_alloc_skb(dev, desc->pkt_len);
+#endif
++ if (!skb)
++ stats->rx_dropped++;
++ break;
++ case ERR_HDLC_ALIGN:
++ case ERR_HDLC_ABORT:
++ stats->rx_frame_errors++;
++ stats->rx_errors++;
++ break;
++ case ERR_HDLC_FCS:
++ stats->rx_crc_errors++;
++ stats->rx_errors++;
++ break;
++ case ERR_HDLC_TOO_LONG:
++ stats->rx_length_errors++;
++ stats->rx_errors++;
++ break;
++ default: /* FIXME - remove printk */
++ printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
++ " errors %u\n", dev->name, desc->status,
++ desc->error_count);
++ stats->rx_errors++;
++ }
+
+ if (!skb) {
-+ port->stat.rx_dropped++;
+ /* put the desc back on RX-ready queue */
-+ desc->buf_len = MAX_MRU;
-+ desc->pkt_len = 0;
++ desc->buf_len = RX_SIZE;
++ desc->pkt_len = desc->status = 0;
+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
+ continue;
+ }
+ temp = skb;
+ skb = port->rx_buff_tab[n];
+ dma_unmap_single(&dev->dev, desc->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
++ RX_SIZE, DMA_FROM_DEVICE);
+#else
+ dma_sync_single(&dev->dev, desc->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
++ RX_SIZE, DMA_FROM_DEVICE);
+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
+ ALIGN(desc->pkt_len, 4) / 4);
+#endif
+ skb_put(skb, desc->pkt_len);
+
-+ debug_pkt(dev, "eth_poll", skb->data, skb->len);
++ debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
+
-+ skb->protocol = eth_type_trans(skb, dev);
++ skb->protocol = hdlc_type_trans(skb, dev);
+ dev->last_rx = jiffies;
-+ port->stat.rx_packets++;
-+ port->stat.rx_bytes += skb->len;
++ stats->rx_packets++;
++ stats->rx_bytes += skb->len;
+ netif_receive_skb(skb);
+
+ /* put the new buffer on RX-free queue */
+ port->rx_buff_tab[n] = temp;
+ desc->data = phys;
+#endif
-+ desc->buf_len = MAX_MRU;
++ desc->buf_len = RX_SIZE;
+ desc->pkt_len = 0;
+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
+ quota--;
+ dev->quota -= received;
+ *budget -= received;
+#if DEBUG_RX
-+ printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
++ printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
+#endif
+ return 1; /* not all work done */
+}
+
+
-+static void eth_txdone_irq(void *unused)
++static void hss_hdlc_txdone_irq(void *pdev)
+{
-+ u32 phys;
++ struct net_device *dev = pdev;
++ struct port *port = dev_to_port(dev);
++ struct net_device_stats *stats = hdlc_stats(dev);
++ int n_desc;
+
+#if DEBUG_TX
-+ printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
++ printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
+#endif
-+ while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
-+ u32 npe_id, n_desc;
-+ struct port *port;
++ while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
++ port, 1)) >= 0) {
+ struct desc *desc;
+ int start;
+
-+ npe_id = phys & 3;
-+ BUG_ON(npe_id >= MAX_NPES);
-+ port = npe_port_tab[npe_id];
-+ BUG_ON(!port);
-+ phys &= ~0x1F; /* mask out non-address bits */
-+ n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
-+ BUG_ON(n_desc >= TX_DESCS);
+ desc = tx_desc_ptr(port, n_desc);
-+ debug_desc(phys, desc);
+
-+ if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
-+ port->stat.tx_packets++;
-+ port->stat.tx_bytes += desc->pkt_len;
++ stats->tx_packets++;
++ stats->tx_bytes += desc->pkt_len;
+
-+ dma_unmap_tx(port, desc);
++ dma_unmap_tx(port, desc);
+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
-+ port->netdev->name, port->tx_buff_tab[n_desc]);
++ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
++ port->netdev->name, port->tx_buff_tab[n_desc]);
+#endif
-+ free_buffer_irq(port->tx_buff_tab[n_desc]);
-+ port->tx_buff_tab[n_desc] = NULL;
-+ }
++ free_buffer_irq(port->tx_buff_tab[n_desc]);
++ port->tx_buff_tab[n_desc] = NULL;
+
+ start = qmgr_stat_empty(port->plat->txreadyq);
-+ queue_put_desc(port->plat->txreadyq, phys, desc);
++ queue_put_desc(port->plat->txreadyq,
++ tx_desc_phys(port, n_desc), desc);
+ if (start) {
+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
-+ port->netdev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
++ " ready\n", port->netdev->name);
+#endif
+ netif_wake_queue(port->netdev);
+ }
+ }
+}
+
-+static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
++static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
+{
-+ struct port *port = netdev_priv(dev);
++ struct port *port = dev_to_port(dev);
++ struct net_device_stats *stats = hdlc_stats(dev);
+ unsigned int txreadyq = port->plat->txreadyq;
+ int len, offset, bytes, n;
+ void *mem;
+ struct desc *desc;
+
+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
+#endif
+
-+ if (unlikely(skb->len > MAX_MRU)) {
++ if (unlikely(skb->len > HDLC_MAX_MRU)) {
+ dev_kfree_skb(skb);
-+ port->stat.tx_errors++;
++ stats->tx_errors++;
+ return NETDEV_TX_OK;
+ }
+
-+ debug_pkt(dev, "eth_xmit", skb->data, skb->len);
++ debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
+
+ len = skb->len;
+#ifdef __ARMEB__
+ bytes = ALIGN(offset + len, 4);
+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
+ dev_kfree_skb(skb);
-+ port->stat.tx_dropped++;
++ stats->tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
+#else
+ kfree(mem);
+#endif
-+ port->stat.tx_dropped++;
++ stats->tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ desc->data = phys + offset;
+ desc->buf_len = desc->pkt_len = len;
+
-+ /* NPE firmware pads short frames with zeros internally */
+ wmb();
-+ queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
++ queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
+ dev->trans_start = jiffies;
+
+ if (qmgr_stat_empty(txreadyq)) {
+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
+#endif
+ netif_stop_queue(dev);
+ /* we could miss TX ready interrupt */
+ if (!qmgr_stat_empty(txreadyq)) {
+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit ready again\n",
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
+ dev->name);
+#endif
+ netif_wake_queue(dev);
+ }
+
+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
+#endif
+ return NETDEV_TX_OK;
+}
+
+
-+static struct net_device_stats *eth_stats(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ return &port->stat;
-+}
-+
-+static void eth_set_mcast_list(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct dev_mc_list *mclist = dev->mc_list;
-+ u8 diffs[ETH_ALEN], *addr;
-+ int cnt = dev->mc_count, i;
-+
-+ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
-+ __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
-+ &port->regs->rx_control[0]);
-+ return;
-+ }
-+
-+ memset(diffs, 0, ETH_ALEN);
-+ addr = mclist->dmi_addr; /* first MAC address */
-+
-+ while (--cnt && (mclist = mclist->next))
-+ for (i = 0; i < ETH_ALEN; i++)
-+ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
-+
-+ for (i = 0; i < ETH_ALEN; i++) {
-+ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
-+ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
-+ }
-+
-+ __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
-+ &port->regs->rx_control[0]);
-+}
-+
-+
-+static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int duplex_chg;
-+ int err;
-+
-+ if (!netif_running(dev))
-+ return -EINVAL;
-+ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
-+ if (duplex_chg)
-+ eth_set_duplex(port);
-+ return err;
-+}
-+
-+
-+static int request_queues(struct port *port)
++static int request_hdlc_queues(struct port *port)
+{
+ int err;
+
-+ err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
++ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
+ if (err)
+ return err;
+
-+ err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
++ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
+ if (err)
+ goto rel_rxfree;
+
-+ err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
++ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
+ if (err)
+ goto rel_rx;
+
+ if (err)
+ goto rel_tx;
+
-+ /* TX-done queue handles skbs sent out by the NPEs */
-+ if (!ports_open) {
-+ err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
-+ if (err)
-+ goto rel_txready;
-+ }
++ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
++ if (err)
++ goto rel_txready;
+ return 0;
+
+rel_txready:
+ qmgr_release_queue(port->plat->txreadyq);
+rel_tx:
-+ qmgr_release_queue(TX_QUEUE(port->id));
++ qmgr_release_queue(queue_ids[port->id].tx);
+rel_rx:
-+ qmgr_release_queue(port->plat->rxq);
++ qmgr_release_queue(queue_ids[port->id].rx);
+rel_rxfree:
-+ qmgr_release_queue(RXFREE_QUEUE(port->id));
++ qmgr_release_queue(queue_ids[port->id].rxfree);
+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
+ port->netdev->name);
+ return err;
+}
+
-+static void release_queues(struct port *port)
++static void release_hdlc_queues(struct port *port)
+{
-+ qmgr_release_queue(RXFREE_QUEUE(port->id));
-+ qmgr_release_queue(port->plat->rxq);
-+ qmgr_release_queue(TX_QUEUE(port->id));
++ qmgr_release_queue(queue_ids[port->id].rxfree);
++ qmgr_release_queue(queue_ids[port->id].rx);
++ qmgr_release_queue(queue_ids[port->id].txdone);
++ qmgr_release_queue(queue_ids[port->id].tx);
+ qmgr_release_queue(port->plat->txreadyq);
-+
-+ if (!ports_open)
-+ qmgr_release_queue(TXDONE_QUEUE);
+}
+
-+static int init_queues(struct port *port)
++static int init_hdlc_queues(struct port *port)
+{
+ int i;
+
+ buffer_t *buff;
+ void *data;
+#ifdef __ARMEB__
-+ if (!(buff = netdev_alloc_skb(port->netdev, MAX_MRU)))
++ if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
+ return -ENOMEM;
+ data = buff->data;
+#else
-+ if (!(buff = kmalloc(MAX_MRU, GFP_KERNEL)))
++ if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
+ return -ENOMEM;
+ data = buff;
+#endif
-+ desc->buf_len = MAX_MRU;
++ desc->buf_len = RX_SIZE;
+ desc->data = dma_map_single(&port->netdev->dev, data,
-+ MAX_MRU, DMA_FROM_DEVICE);
++ RX_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(desc->data)) {
+ free_buffer(buff);
+ return -EIO;
+ return 0;
+}
+
-+static void destroy_queues(struct port *port)
++static void destroy_hdlc_queues(struct port *port)
+{
+ int i;
+
+ buffer_t *buff = port->rx_buff_tab[i];
+ if (buff) {
+ dma_unmap_single(&port->netdev->dev,
-+ desc->data, MAX_MRU,
++ desc->data, RX_SIZE,
+ DMA_FROM_DEVICE);
+ free_buffer(buff);
+ }
+ free_buffer(buff);
+ }
+ }
-+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
-+ port->desc_tab = NULL;
-+ }
-+
-+ if (!ports_open && dma_pool) {
-+ dma_pool_destroy(dma_pool);
-+ dma_pool = NULL;
-+ }
-+}
-+
-+static int eth_open(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int i, err;
-+
-+ if (!npe_running(npe)) {
-+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
-+ if (err)
-+ return err;
-+
-+ if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
-+ printk(KERN_ERR "%s: %s not responding\n", dev->name,
-+ npe_name(npe));
-+ return -EIO;
-+ }
-+ }
-+
-+ mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
-+ msg.eth_id = port->id;
-+ msg.byte5 = port->plat->rxq | 0x80;
-+ msg.byte7 = port->plat->rxq << 4;
-+ for (i = 0; i < 8; i++) {
-+ msg.byte3 = i;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
-+ return -EIO;
-+ }
-+
-+ msg.cmd = NPE_EDB_SETPORTADDRESS;
-+ msg.eth_id = PHYSICAL_ID(port->id);
-+ msg.byte2 = dev->dev_addr[0];
-+ msg.byte3 = dev->dev_addr[1];
-+ msg.byte4 = dev->dev_addr[2];
-+ msg.byte5 = dev->dev_addr[3];
-+ msg.byte6 = dev->dev_addr[4];
-+ msg.byte7 = dev->dev_addr[5];
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
-+ return -EIO;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_FW_SETFIREWALLMODE;
-+ msg.eth_id = port->id;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
-+ return -EIO;
-+
-+ if ((err = request_queues(port)) != 0)
-+ return err;
-+
-+ if ((err = init_queues(port)) != 0) {
-+ destroy_queues(port);
-+ release_queues(port);
-+ return err;
-+ }
-+
-+ for (i = 0; i < ETH_ALEN; i++)
-+ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-+ __raw_writel(0x08, &port->regs->random_seed);
-+ __raw_writel(0x12, &port->regs->partial_empty_threshold);
-+ __raw_writel(0x30, &port->regs->partial_full_threshold);
-+ __raw_writel(0x08, &port->regs->tx_start_bytes);
-+ __raw_writel(0x15, &port->regs->tx_deferral);
-+ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
-+ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
-+ __raw_writel(0x80, &port->regs->slot_time);
-+ __raw_writel(0x01, &port->regs->int_clock_threshold);
-+
-+ /* Populate queues with buffers, no failure after this point */
-+ for (i = 0; i < TX_DESCS; i++)
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
-+
-+ for (i = 0; i < RX_DESCS; i++)
-+ queue_put_desc(RXFREE_QUEUE(port->id),
-+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
-+
-+ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
-+ __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
-+ __raw_writel(0, &port->regs->rx_control[1]);
-+ __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
-+
-+ phy_check_media(port, 1);
-+ eth_set_mcast_list(dev);
-+ netif_start_queue(dev);
-+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
++ port->desc_tab = NULL;
++ }
+
-+ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ eth_rx_irq, dev);
-+ if (!ports_open) {
-+ qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ eth_txdone_irq, NULL);
-+ qmgr_enable_irq(TXDONE_QUEUE);
++ if (!ports_open && dma_pool) {
++ dma_pool_destroy(dma_pool);
++ dma_pool = NULL;
+ }
-+ ports_open++;
-+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
-+ return 0;
+}
+
-+static int eth_close(struct net_device *dev)
++static int hss_hdlc_open(struct net_device *dev)
+{
-+ struct port *port = netdev_priv(dev);
++ struct port *port = dev_to_port(dev);
++ struct npe *npe = port->npe;
+ struct msg msg;
-+ int buffs = RX_DESCS; /* allocated RX buffers */
-+ int i;
++ int i, err;
+
-+ ports_open--;
-+ qmgr_disable_irq(port->plat->rxq);
-+ netif_stop_queue(dev);
++ if (!npe_running(npe)) {
++ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
++ if (err)
++ return err;
++ }
+
-+ while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
-+ buffs--;
++ if ((err = hdlc_open(dev)) != 0)
++ return err;
++
++ if (port->plat->open)
++ if ((err = port->plat->open(port->id, port->netdev,
++ hss_hdlc_set_carrier)) != 0)
++ goto err_hdlc_close;
+
++ /* HSS main configuration */
+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETLOOPBACK_MODE;
-+ msg.eth_id = port->id;
-+ msg.byte3 = 1;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
-+ printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++ msg.index = 0; /* offset in HSS config */
+
-+ i = 0;
-+ do { /* drain RX buffers */
-+ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ if (qmgr_stat_empty(TX_QUEUE(port->id))) {
-+ /* we have to inject some packet */
-+ struct desc *desc;
-+ u32 phys;
-+ int n = queue_get_desc(port->plat->txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+ phys = tx_desc_phys(port, n);
-+ desc->buf_len = desc->pkt_len = 1;
-+ wmb();
-+ queue_put_desc(TX_QUEUE(port->id), phys, desc);
-+ }
-+ udelay(1);
-+ } while (++i < MAX_CLOSE_WAIT);
++ msg.data32 = PCR_FRM_PULSE_DISABLED |
++ PCR_SOF_NO_FBIT |
++ PCR_MSB_ENDIAN |
++ PCR_TX_DATA_ENABLE;
+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
-+ " left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
-+#endif
++ if (port->clock_type == CLOCK_INT)
++ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
+
-+ buffs = TX_DESCS;
-+ while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
-+ buffs--; /* cancel TX */
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
++ goto err_plat_close; /* 0: TX PCR */
+
-+ i = 0;
-+ do {
-+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ } while (++i < MAX_CLOSE_WAIT);
++ msg.index = 4;
++ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
++ goto err_plat_close; /* 4: RX PCR */
+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
-+ "left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
-+#endif
++ msg.index = 8;
++ msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
++ (port->id ? CCR_SECOND_HSS : 0);
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
++ goto err_plat_close; /* 8: Core CR */
+
-+ msg.byte3 = 0;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
-+ printk(KERN_CRIT "%s: unable to disable loopback\n",
-+ dev->name);
++ msg.index = 12;
++ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
++ goto err_plat_close; /* 12: CLK CR */
+
-+ port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
-+ mdio_write(dev, port->plat->phy, MII_BMCR,
-+ port->mii_bmcr | BMCR_PDOWN);
++ msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
++ msg.index = 16;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
++ goto err_plat_close; /* 16: TX FCR */
+
-+ if (!ports_open)
-+ qmgr_disable_irq(TXDONE_QUEUE);
-+ cancel_rearming_delayed_work(&port->mdio_thread);
-+ destroy_queues(port);
-+ release_queues(port);
-+ return 0;
-+}
++ msg.index = 20;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
++ goto err_plat_close; /* 20: RX FCR */
+
-+static int __devinit eth_init_one(struct platform_device *pdev)
-+{
-+ struct port *port;
-+ struct net_device *dev;
-+ struct eth_plat_info *plat = pdev->dev.platform_data;
-+ u32 regs_phys;
-+ int err;
++ msg.data32 = 0; /* Fill LUT with HDLC timeslots */
++ for (i = 0; i < 32 / LUT_BITS; i++)
++ msg.data32 |= TDMMAP_HDLC << (LUT_BITS * i);
+
-+ if (!(dev = alloc_etherdev(sizeof(struct port))))
-+ return -ENOMEM;
++ for (i = 0; i < 2 /* TX and RX */ * TIMESLOTS * LUT_BITS / 8; i += 4) {
++ msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
++ goto err_plat_close;
++ }
+
-+ SET_MODULE_OWNER(dev);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ port = netdev_priv(dev);
-+ port->netdev = dev;
-+ port->id = pdev->id;
++ /* HDLC mode configuration */
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_NUM_PIPES_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = PKT_NUM_PIPES;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
++ goto err_plat_close;
+
-+ switch (port->id) {
-+ case IXP4XX_ETH_NPEA:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
-+ regs_phys = IXP4XX_EthA_BASE_PHYS;
-+ break;
-+ case IXP4XX_ETH_NPEB:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ regs_phys = IXP4XX_EthB_BASE_PHYS;
-+ break;
-+ case IXP4XX_ETH_NPEC:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
-+ regs_phys = IXP4XX_EthC_BASE_PHYS;
-+ break;
-+ default:
-+ err = -ENOSYS;
-+ goto err_free;
-+ }
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = PKT_PIPE_FIFO_SIZEW;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
++ goto err_plat_close;
+
-+ dev->open = eth_open;
-+ dev->hard_start_xmit = eth_xmit;
-+ dev->poll = eth_poll;
-+ dev->stop = eth_close;
-+ dev->get_stats = eth_stats;
-+ dev->do_ioctl = eth_ioctl;
-+ dev->set_multicast_list = eth_set_mcast_list;
-+ dev->weight = 16;
-+ dev->tx_queue_len = 100;
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
++ msg.hss_port = port->id;
++ msg.data32 = 0x7F7F7F7F;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
++ goto err_plat_close;
+
-+ if (!(port->npe = npe_request(NPE_ID(port->id)))) {
-+ err = -EIO;
-+ goto err_free;
-+ }
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_LOAD;
++ msg.hss_port = port->id;
++ if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
++ goto err_plat_close;
++ if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
++ goto err_plat_close;
+
-+ if (register_netdev(dev)) {
-+ err = -EIO;
-+ goto err_npe_rel;
++ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
++ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
++ printk(KERN_DEBUG "%s: unexpected message received in"
++ " response to HSS_LOAD_CONFIG\n", npe_name(npe));
++ err = EIO;
++ goto err_plat_close;
+ }
+
-+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
-+ if (!port->mem_res) {
-+ err = -EBUSY;
-+ goto err_unreg;
-+ }
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = port->hdlc_cfg; /* rx_cfg */
++ msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
++ goto err_plat_close;
+
-+ port->plat = plat;
-+ npe_port_tab[NPE_ID(port->id)] = port;
-+ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_MODE_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = NPE_PKT_MODE_HDLC;
++ /* msg.data8b = inv_mask */
++ /* msg.data8c = or_mask */
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
++ goto err_plat_close;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
++ msg.hss_port = port->id;
++ msg.data16a = HDLC_MAX_MRU;
++ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
++ goto err_plat_close;
++
++ if ((err = request_hdlc_queues(port)) != 0)
++ goto err_plat_close;
++
++ if ((err = init_hdlc_queues(port)) != 0)
++ goto err_destroy_queues;
+
-+ platform_set_drvdata(pdev, dev);
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_FLOW_ENABLE;
++ msg.hss_port = port->id;
++ if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
++ goto err_destroy_queues;
+
-+ __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
-+ &port->regs->core_control);
-+ udelay(50);
-+ __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
-+ udelay(50);
++ /* Populate queues with buffers, no failure after this point */
++ for (i = 0; i < TX_DESCS; i++)
++ queue_put_desc(port->plat->txreadyq,
++ tx_desc_phys(port, i), tx_desc_ptr(port, i));
+
-+ port->mii.dev = dev;
-+ port->mii.mdio_read = mdio_read;
-+ port->mii.mdio_write = mdio_write;
-+ port->mii.phy_id = plat->phy;
-+ port->mii.phy_id_mask = 0x1F;
-+ port->mii.reg_num_mask = 0x1F;
++ for (i = 0; i < RX_DESCS; i++)
++ queue_put_desc(queue_ids[port->id].rxfree,
++ rx_desc_phys(port, i), rx_desc_ptr(port, i));
+
-+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
-+ npe_name(port->npe));
++ netif_start_queue(dev);
+
-+ phy_reset(dev, plat->phy);
-+ port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN);
-+ mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
++ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
++ hss_hdlc_rx_irq, dev);
+
-+ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
++ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
++ hss_hdlc_txdone_irq, dev);
++ qmgr_enable_irq(queue_ids[port->id].txdone);
++
++ ports_open++;
++ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
+ return 0;
+
-+err_unreg:
-+ unregister_netdev(dev);
-+err_npe_rel:
-+ npe_release(port->npe);
-+err_free:
-+ free_netdev(dev);
++err_destroy_queues:
++ destroy_hdlc_queues(port);
++ release_hdlc_queues(port);
++err_plat_close:
++ if (port->plat->close)
++ port->plat->close(port->id, port->netdev);
++err_hdlc_close:
++ hdlc_close(dev);
+ return err;
+}
+
-+static int __devexit eth_remove_one(struct platform_device *pdev)
++static int hss_hdlc_close(struct net_device *dev)
+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct port *port = netdev_priv(dev);
++ struct port *port = dev_to_port(dev);
++ struct npe *npe = port->npe;
++ struct msg msg;
++ int buffs = RX_DESCS; /* allocated RX buffers */
++ int i;
+
-+ unregister_netdev(dev);
-+ npe_port_tab[NPE_ID(port->id)] = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ npe_release(port->npe);
-+ release_resource(port->mem_res);
-+ free_netdev(dev);
++ ports_open--;
++ qmgr_disable_irq(queue_ids[port->id].rx);
++ netif_stop_queue(dev);
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_FLOW_DISABLE;
++ msg.hss_port = port->id;
++ if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
++ printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
++ port->id);
++ /* The upper level would ignore the error anyway */
++ }
++
++ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
++ buffs--;
++ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
++ buffs--;
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
++ " left in NPE\n", dev->name, buffs);
++
++ buffs = TX_DESCS;
++ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
++ buffs--; /* cancel TX */
++
++ i = 0;
++ do {
++ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
++ buffs--;
++ if (!buffs)
++ break;
++ } while (++i < MAX_CLOSE_WAIT);
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
++ "left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++ if (!buffs)
++ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
++#endif
++ qmgr_disable_irq(queue_ids[port->id].txdone);
++ destroy_hdlc_queues(port);
++ release_hdlc_queues(port);
++
++ if (port->plat->close)
++ port->plat->close(port->id, port->netdev);
++ hdlc_close(dev);
+ return 0;
+}
+
-+static struct platform_driver drv = {
-+ .driver.name = DRV_NAME,
-+ .probe = eth_init_one,
-+ .remove = eth_remove_one,
-+};
+
-+static int __init eth_init_module(void)
++static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
++ unsigned short parity)
+{
-+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-+ return -ENOSYS;
++ struct port *port = dev_to_port(dev);
+
-+ /* All MII PHY accesses use NPE-B Ethernet registers */
-+ spin_lock_init(&mdio_lock);
-+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
++ if (encoding != ENCODING_NRZ)
++ return -EINVAL;
+
-+ return platform_driver_register(&drv);
++ switch(parity) {
++ case PARITY_CRC16_PR1_CCITT:
++ port->hdlc_cfg = 0;
++ return 0;
++
++ case PARITY_CRC32_PR1_CCITT:
++ port->hdlc_cfg = PKT_HDLC_CRC_32;
++ return 0;
++
++ default:
++ return -EINVAL;
++ }
+}
+
-+static void __exit eth_cleanup_module(void)
++
++static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
-+ platform_driver_unregister(&drv);
-+}
++ const size_t size = sizeof(sync_serial_settings);
++ sync_serial_settings new_line;
++ int clk;
++ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
++ struct port *port = dev_to_port(dev);
+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
-+MODULE_LICENSE("GPL v2");
-+module_init(eth_init_module);
-+module_exit(eth_cleanup_module);
-diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
-index a3df09e..94e7aa7 100644
---- a/drivers/net/wan/Kconfig
-+++ b/drivers/net/wan/Kconfig
-@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
-
- Say Y if your card supports this feature.
-
-+config IXP4XX_HSS
-+ tristate "IXP4xx HSS (synchronous serial port) support"
-+ depends on HDLC && ARM && ARCH_IXP4XX
-+ select IXP4XX_NPE
-+ select IXP4XX_QMGR
-+ help
-+ Say Y here if you want to use built-in HSS ports
-+ on IXP4xx processor.
++ if (cmd != SIOCWANDEV)
++ return hdlc_ioctl(dev, ifr, cmd);
+
- config DLCI
- tristate "Frame Relay DLCI support"
- ---help---
-diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
-index d61fef3..1b1d116 100644
---- a/drivers/net/wan/Makefile
-+++ b/drivers/net/wan/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
- obj-$(CONFIG_WANXL) += wanxl.o
- obj-$(CONFIG_PCI200SYN) += pci200syn.o
- obj-$(CONFIG_PC300TOO) += pc300too.o
-+obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
-
- clean-files := wanxlfw.inc
- $(obj)/wanxl.o: $(obj)/wanxlfw.inc
-diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
-new file mode 100644
-index 0000000..c4cdace
---- /dev/null
-+++ b/drivers/net/wan/ixp4xx_hss.c
-@@ -0,0 +1,1270 @@
-+/*
-+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
++ switch(ifr->ifr_settings.type) {
++ case IF_GET_IFACE:
++ ifr->ifr_settings.type = IF_IFACE_V35;
++ if (ifr->ifr_settings.size < size) {
++ ifr->ifr_settings.size = size; /* data size wanted */
++ return -ENOBUFS;
++ }
++ memset(&new_line, 0, sizeof(new_line));
++ new_line.clock_type = port->clock_type;
++ new_line.clock_rate = port->clock_rate;
++ new_line.loopback = port->loopback;
++ if (copy_to_user(line, &new_line, size))
++ return -EFAULT;
++ return 0;
+
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/hdlc.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/npe.h>
-+#include <asm/arch/qmgr.h>
++ case IF_IFACE_SYNC_SERIAL:
++ case IF_IFACE_V35:
++ if(!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (dev->flags & IFF_UP)
++ return -EBUSY; /* Cannot change parameters when open */
+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_CLOSE 0
++ if (copy_from_user(&new_line, line, size))
++ return -EFAULT;
+
-+#define DRV_NAME "ixp4xx_hss"
++ clk = new_line.clock_type;
++ if (port->plat->set_clock)
++ clk = port->plat->set_clock(port->id, clk);
+
-+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
-+#define FRAME_SYNC_OFFSET 0 /* unused, channelized only */
-+#define FRAME_SYNC_SIZE 1024
-+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
-+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
++ if (clk != CLOCK_EXT && clk != CLOCK_INT)
++ return -EINVAL; /* No such clock setting */
+
-+#define RX_DESCS 16 /* also length of all RX queues */
-+#define TX_DESCS 16 /* also length of all TX queues */
++ if (new_line.loopback != 0 && new_line.loopback != 1)
++ return -EINVAL;
+
-+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds */
++ port->clock_type = clk; /* Update settings */
++ port->clock_rate = new_line.clock_rate;
++ port->loopback = new_line.loopback;
++ return 0;
+
-+/* Queue IDs */
-+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
-+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
-+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
-+#define HSS0_PKT_TX1_QUEUE 15
-+#define HSS0_PKT_TX2_QUEUE 16
-+#define HSS0_PKT_TX3_QUEUE 17
-+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
-+#define HSS0_PKT_RXFREE1_QUEUE 19
-+#define HSS0_PKT_RXFREE2_QUEUE 20
-+#define HSS0_PKT_RXFREE3_QUEUE 21
-+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
++ default:
++ return hdlc_ioctl(dev, ifr, cmd);
++ }
++}
+
-+#define HSS1_CHL_RXTRIG_QUEUE 10
-+#define HSS1_PKT_RX_QUEUE 0
-+#define HSS1_PKT_TX0_QUEUE 5
-+#define HSS1_PKT_TX1_QUEUE 6
-+#define HSS1_PKT_TX2_QUEUE 7
-+#define HSS1_PKT_TX3_QUEUE 8
-+#define HSS1_PKT_RXFREE0_QUEUE 1
-+#define HSS1_PKT_RXFREE1_QUEUE 2
-+#define HSS1_PKT_RXFREE2_QUEUE 3
-+#define HSS1_PKT_RXFREE3_QUEUE 4
-+#define HSS1_PKT_TXDONE_QUEUE 9
+
-+#define NPE_PKT_MODE_HDLC 0
-+#define NPE_PKT_MODE_RAW 1
-+#define NPE_PKT_MODE_56KMODE 2
-+#define NPE_PKT_MODE_56KENDIAN_MSB 4
++static int __devinit hss_init_one(struct platform_device *pdev)
++{
++ struct port *port;
++ struct net_device *dev;
++ hdlc_device *hdlc;
++ int err;
+
-+/* PKT_PIPE_HDLC_CFG_WRITE flags */
-+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
-+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
-+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
++ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++ return -ENOMEM;
++ platform_set_drvdata(pdev, port);
++ port->id = pdev->id;
+
++ if ((port->npe = npe_request(0)) == NULL) {
++ err = -ENOSYS;
++ goto err_free;
++ }
+
-+/* hss_config, PCRs */
-+/* Frame sync sampling, default = active low */
-+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
-+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
-+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
++ port->plat = pdev->dev.platform_data;
++ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
++ err = -ENOMEM;
++ goto err_plat;
++ }
+
-+/* Frame sync pin: input (default) or output generated off a given clk edge */
-+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
-+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
++ SET_MODULE_OWNER(net);
++ SET_NETDEV_DEV(dev, &pdev->dev);
++ hdlc = dev_to_hdlc(dev);
++ hdlc->attach = hss_hdlc_attach;
++ hdlc->xmit = hss_hdlc_xmit;
++ dev->open = hss_hdlc_open;
++ dev->poll = hss_hdlc_poll;
++ dev->stop = hss_hdlc_close;
++ dev->do_ioctl = hss_hdlc_ioctl;
++ dev->weight = 16;
++ dev->tx_queue_len = 100;
++ port->clock_type = CLOCK_EXT;
++ port->clock_rate = 2048000;
+
-+/* Frame and data clock sampling on edge, default = falling */
-+#define PCR_FCLK_EDGE_RISING 0x08000000
-+#define PCR_DCLK_EDGE_RISING 0x04000000
++ if (register_hdlc_device(dev)) {
++ printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
++ port->id);
++ err = -ENOBUFS;
++ goto err_free_netdev;
++ }
++ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
++ return 0;
+
-+/* Clock direction, default = input */
-+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
++err_free_netdev:
++ free_netdev(dev);
++err_plat:
++ npe_release(port->npe);
++ platform_set_drvdata(pdev, NULL);
++err_free:
++ kfree(port);
++ return err;
++}
+
-+/* Generate/Receive frame pulses, default = enabled */
-+#define PCR_FRM_PULSE_DISABLED 0x01000000
++static int __devexit hss_remove_one(struct platform_device *pdev)
++{
++ struct port *port = platform_get_drvdata(pdev);
+
-+ /* Data rate is full (default) or half the configured clk speed */
-+#define PCR_HALF_CLK_RATE 0x00200000
++ unregister_hdlc_device(port->netdev);
++ free_netdev(port->netdev);
++ npe_release(port->npe);
++ platform_set_drvdata(pdev, NULL);
++ kfree(port);
++ return 0;
++}
+
-+/* Invert data between NPE and HSS FIFOs? (default = no) */
-+#define PCR_DATA_POLARITY_INVERT 0x00100000
++static struct platform_driver drv = {
++ .driver.name = DRV_NAME,
++ .probe = hss_init_one,
++ .remove = hss_remove_one,
++};
+
-+/* TX/RX endianness, default = LSB */
-+#define PCR_MSB_ENDIAN 0x00080000
++static int __init hss_init_module(void)
++{
++ if ((ixp4xx_read_feature_bits() &
++ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
++ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
++ return -ENOSYS;
++ return platform_driver_register(&drv);
++}
+
-+/* Normal (default) / open drain mode (TX only) */
-+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
++static void __exit hss_cleanup_module(void)
++{
++ platform_driver_unregister(&drv);
++}
+
-+/* No framing bit transmitted and expected on RX? (default = framing bit) */
-+#define PCR_SOF_NO_FBIT 0x00020000
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
++MODULE_LICENSE("GPL v2");
++module_init(hss_init_module);
++module_exit(hss_cleanup_module);
+From: Krzysztof Halasa <khc@pm.waw.pl>
+Subject: Adds functions to read and write IXP4xx "feature" bits
+
+Adds functions to read and write IXP4xx "feature" (aka "fuse")
+bits, containing information about available/enabled CPU features.
+
+The uncompress.h included by boot/compressed/misc.c resides in
+a different space than rest of the kernel and thus can't use
+asm/hardware.h (including asm/arch/cpu.h - which, in turn, may use
+EXPORTed symbol "processor_id").
+
+Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
+--
+PATCH FOLLOWS
+KernelVersion: 2.6.23
+
+diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+index 5d949d7..c704fe8 100644
+--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
++++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+@@ -15,10 +15,6 @@
+ *
+ */
+
+-#ifndef __ASM_ARCH_HARDWARE_H__
+-#error "Do not include this directly, instead #include <asm/hardware.h>"
+-#endif
+-
+ #ifndef _ASM_ARM_IXP4XX_H_
+ #define _ASM_ARM_IXP4XX_H_
+
+@@ -607,4 +603,36 @@
+
+ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
++/* "fuse" bits of IXP_EXP_CFG2 */
++#define IXP4XX_FEATURE_RCOMP (1 << 0)
++#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
++#define IXP4XX_FEATURE_HASH (1 << 2)
++#define IXP4XX_FEATURE_AES (1 << 3)
++#define IXP4XX_FEATURE_DES (1 << 4)
++#define IXP4XX_FEATURE_HDLC (1 << 5)
++#define IXP4XX_FEATURE_AAL (1 << 6)
++#define IXP4XX_FEATURE_HSS (1 << 7)
++#define IXP4XX_FEATURE_UTOPIA (1 << 8)
++#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
++#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
++#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
++#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
++#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
++#define IXP4XX_FEATURE_PCI (1 << 14)
++#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
++#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
++#define IXP4XX_FEATURE_USB_HOST (1 << 18)
++#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
++#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
++#define IXP4XX_FEATURE_RSA (1 << 21)
++#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
++#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
+
-+/* Drive data pins? */
-+#define PCR_TX_DATA_ENABLE 0x00010000
++#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
++ IXP4XX_FEATURE_USB_HOST | \
++ IXP4XX_FEATURE_NPEA_ETH | \
++ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
++ IXP4XX_FEATURE_RSA | \
++ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
-+/* Voice 56k type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_V56K_HIGH 0x00002000
-+#define PCR_TX_V56K_HIGH_IMP 0x00004000
+ #endif
+diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
+index d2523b3..2fa3d6b 100644
+--- a/include/asm-arm/arch-ixp4xx/cpu.h
++++ b/include/asm-arm/arch-ixp4xx/cpu.h
+@@ -28,4 +28,19 @@ extern unsigned int processor_id;
+ #define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+ IXP465_PROCESSOR_ID_VALUE)
+
++static inline u32 ixp4xx_read_feature_bits(void)
++{
++ unsigned int val = ~*IXP4XX_EXP_CFG2;
++ val &= ~IXP4XX_FEATURE_RESERVED;
++ if (!cpu_is_ixp46x())
++ val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
+
-+/* Unassigned type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_UNASS_HIGH 0x00000800
-+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
++ return val;
++}
+
-+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
-+#define PCR_TX_FB_HIGH_IMP 0x00000400
++static inline void ixp4xx_write_feature_bits(u32 value)
++{
++ *IXP4XX_EXP_CFG2 = ~value;
++}
+
-+/* 56k data endiannes - which bit unused: high (default) or low */
-+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
+ #endif /* _ASM_ARCH_CPU_H */
+diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
+index 297ceda..73e8dc3 100644
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
+@@ -27,13 +27,13 @@
+
+ #define pcibios_assign_all_busses() 1
+
++/* Register locations and bits */
++#include "ixp4xx-regs.h"
++
+ #ifndef __ASSEMBLER__
+ #include <asm/arch/cpu.h>
+ #endif
+
+-/* Register locations and bits */
+-#include "ixp4xx-regs.h"
+-
+ /* Platform helper functions and definitions */
+ #include "platform.h"
+
+diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
+index f7a35b7..34ef48f 100644
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -13,7 +13,7 @@
+ #ifndef _ARCH_UNCOMPRESS_H_
+ #define _ARCH_UNCOMPRESS_H_
+
+-#include <asm/hardware.h>
++#include "ixp4xx-regs.h"
+ #include <asm/mach-types.h>
+ #include <linux/serial_reg.h>
+
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index 4de432e..c4c810b 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -61,6 +61,7 @@ extern int root_mountflags;
+ extern void _stext, _text, _etext, __data_start, _edata, _end;
+
+ unsigned int processor_id;
++EXPORT_SYMBOL(processor_id);
+ unsigned int __machine_arch_type;
+ EXPORT_SYMBOL(__machine_arch_type);
+
+
+
+From: Krzysztof Halasa <khc@pm.waw.pl>
+Subject: Adds drivers for IXP4xx QMgr and NPE features
+
+This patch adds drivers for IXP4xx hardware Queue Manager and for
+Network Processor Engines. Requires patch #4712 (reading/writing
+CPU feature (aka fuse) bits).
+
+Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
+--
+PATCH FOLLOWS
+KernelVersion: 2.6.23
+
+diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
+index 61b2dfc..e774447 100644
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -189,6 +189,20 @@ config IXP4XX_INDIRECT_PCI
+ need to use the indirect method instead. If you don't know
+ what you need, leave this option unselected.
+
++config IXP4XX_QMGR
++ tristate "IXP4xx Queue Manager support"
++ help
++ This driver supports IXP4xx built-in hardware queue manager
++ and is automatically selected by Ethernet and HSS drivers.
+
-+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
-+#define PCR_TX_56KS_56K_DATA 0x00000100
++config IXP4XX_NPE
++ tristate "IXP4xx Network Processor Engine support"
++ select HOTPLUG
++ select FW_LOADER
++ help
++ This driver supports IXP4xx built-in network coprocessors
++ and is automatically selected by Ethernet and HSS drivers.
+
-+/* hss_config, cCR */
-+/* Number of packetized clients, default = 1 */
-+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
-+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
+ endmenu
+
+ endif
+diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
+index 77e00ad..4bb97e1 100644
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -30,3 +30,5 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
++obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
+diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h
+new file mode 100644
+index 0000000..1e52b95
+--- /dev/null
++++ b/include/asm-arm/arch-ixp4xx/qmgr.h
+@@ -0,0 +1,126 @@
++/*
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
+
-+/* default = no loopback */
-+#define CCR_LOOPBACK 0x02000000
++#ifndef IXP4XX_QMGR_H
++#define IXP4XX_QMGR_H
+
-+/* HSS number, default = 0 (first) */
-+#define CCR_SECOND_HSS 0x01000000
++#include <linux/io.h>
++#include <linux/kernel.h>
+
++#define HALF_QUEUES 32
++#define QUEUES 64 /* only 32 lower queues currently supported */
++#define MAX_QUEUE_LENGTH 4 /* in dwords */
+
-+/* hss_config, clkCR: main:10, num:10, denom:12 */
-+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
++#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
++#define QUEUE_STAT1_NEARLY_EMPTY 2
++#define QUEUE_STAT1_NEARLY_FULL 4
++#define QUEUE_STAT1_FULL 8
++#define QUEUE_STAT2_UNDERFLOW 1
++#define QUEUE_STAT2_OVERFLOW 2
+
-+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
-+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
-+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
-+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
-+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
-+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
++#define QUEUE_WATERMARK_0_ENTRIES 0
++#define QUEUE_WATERMARK_1_ENTRY 1
++#define QUEUE_WATERMARK_2_ENTRIES 2
++#define QUEUE_WATERMARK_4_ENTRIES 3
++#define QUEUE_WATERMARK_8_ENTRIES 4
++#define QUEUE_WATERMARK_16_ENTRIES 5
++#define QUEUE_WATERMARK_32_ENTRIES 6
++#define QUEUE_WATERMARK_64_ENTRIES 7
+
-+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
-+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
-+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
-+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
-+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
-+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
++/* queue interrupt request conditions */
++#define QUEUE_IRQ_SRC_EMPTY 0
++#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
++#define QUEUE_IRQ_SRC_NEARLY_FULL 2
++#define QUEUE_IRQ_SRC_FULL 3
++#define QUEUE_IRQ_SRC_NOT_EMPTY 4
++#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
++#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
++#define QUEUE_IRQ_SRC_NOT_FULL 7
+
++struct qmgr_regs {
++ u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
++ u32 stat1[4]; /* 0x400 - 0x40F */
++ u32 stat2[2]; /* 0x410 - 0x417 */
++ u32 statne_h; /* 0x418 - queue nearly empty */
++ u32 statf_h; /* 0x41C - queue full */
++ u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
++ u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
++ u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
++ u32 reserved[1776];
++ u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
++};
+
-+/* hss_config, LUT entries */
-+#define TDMMAP_UNASSIGNED 0
-+#define TDMMAP_HDLC 1 /* HDLC - packetized */
-+#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
-+#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
++void qmgr_set_irq(unsigned int queue, int src,
++ void (*handler)(void *pdev), void *pdev);
++void qmgr_enable_irq(unsigned int queue);
++void qmgr_disable_irq(unsigned int queue);
+
-+#define TIMESLOTS 128
-+#define LUT_BITS 2
++/* request_ and release_queue() must be called from non-IRQ context */
++int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
++ unsigned int nearly_empty_watermark,
++ unsigned int nearly_full_watermark);
++void qmgr_release_queue(unsigned int queue);
+
-+/* offsets into HSS config */
-+#define HSS_CONFIG_TX_PCR 0x00
-+#define HSS_CONFIG_RX_PCR 0x04
-+#define HSS_CONFIG_CORE_CR 0x08
-+#define HSS_CONFIG_CLOCK_CR 0x0C
-+#define HSS_CONFIG_TX_FCR 0x10
-+#define HSS_CONFIG_RX_FCR 0x14
-+#define HSS_CONFIG_TX_LUT 0x18
-+#define HSS_CONFIG_RX_LUT 0x38
+
++static inline void qmgr_put_entry(unsigned int queue, u32 val)
++{
++ extern struct qmgr_regs __iomem *qmgr_regs;
++ __raw_writel(val, &qmgr_regs->acc[queue][0]);
++}
+
-+/* NPE command codes */
-+/* writes the ConfigWord value to the location specified by offset */
-+#define PORT_CONFIG_WRITE 0x40
++static inline u32 qmgr_get_entry(unsigned int queue)
++{
++ extern struct qmgr_regs __iomem *qmgr_regs;
++ return __raw_readl(&qmgr_regs->acc[queue][0]);
++}
+
-+/* triggers the NPE to load the contents of the configuration table */
-+#define PORT_CONFIG_LOAD 0x41
++static inline int qmgr_get_stat1(unsigned int queue)
++{
++ extern struct qmgr_regs __iomem *qmgr_regs;
++ return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
++ >> ((queue & 7) << 2)) & 0xF;
++}
+
-+/* triggers the NPE to return an HssErrorReadResponse message */
-+#define PORT_ERROR_READ 0x42
++static inline int qmgr_get_stat2(unsigned int queue)
++{
++ extern struct qmgr_regs __iomem *qmgr_regs;
++ return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
++ >> ((queue & 0xF) << 1)) & 0x3;
++}
+
-+/* reset NPE internal status and enable the HssChannelized operation */
-+#define CHAN_FLOW_ENABLE 0x43
-+#define CHAN_FLOW_DISABLE 0x44
-+#define CHAN_IDLE_PATTERN_WRITE 0x45
-+#define CHAN_NUM_CHANS_WRITE 0x46
-+#define CHAN_RX_BUF_ADDR_WRITE 0x47
-+#define CHAN_RX_BUF_CFG_WRITE 0x48
-+#define CHAN_TX_BLK_CFG_WRITE 0x49
-+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
-+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
-+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
-+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
++static inline int qmgr_stat_empty(unsigned int queue)
++{
++ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
++}
+
-+/* downloads the gainWord value for a timeslot switching channel associated
-+ with bypassNum */
-+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
++static inline int qmgr_stat_nearly_empty(unsigned int queue)
++{
++ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
++}
+
-+/* triggers the NPE to reset internal status and enable the HssPacketized
-+ operation for the flow specified by pPipe */
-+#define PKT_PIPE_FLOW_ENABLE 0x50
-+#define PKT_PIPE_FLOW_DISABLE 0x51
-+#define PKT_NUM_PIPES_WRITE 0x52
-+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
-+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
-+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
-+#define PKT_PIPE_RX_SIZE_WRITE 0x56
-+#define PKT_PIPE_MODE_WRITE 0x57
++static inline int qmgr_stat_nearly_full(unsigned int queue)
++{
++ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
++}
+
-+/* HDLC packet status values - desc->status */
-+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
-+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
-+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
-+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
-+ this packet (if buf_len < pkt_len) */
-+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
-+#define ERR_HDLC_ABORT 6 /* abort sequence received */
-+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
++static inline int qmgr_stat_full(unsigned int queue)
++{
++ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
++}
+
++static inline int qmgr_stat_underflow(unsigned int queue)
++{
++ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
++}
++
++static inline int qmgr_stat_overflow(unsigned int queue)
++{
++ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
++}
+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
+#endif
+diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h
+new file mode 100644
+index 0000000..37d0511
+--- /dev/null
++++ b/include/asm-arm/arch-ixp4xx/npe.h
+@@ -0,0 +1,39 @@
++#ifndef __IXP4XX_NPE_H
++#define __IXP4XX_NPE_H
+
-+struct port {
-+ struct npe *npe;
-+ struct net_device *netdev;
-+ struct hss_plat_info *plat;
-+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
-+ struct desc *desc_tab; /* coherent */
-+ u32 desc_tab_phys;
-+ int id;
-+ unsigned int clock_type, clock_rate, loopback;
-+ u8 hdlc_cfg;
-+};
++#include <linux/kernel.h>
+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, unused, hss_port, index;
-+ union {
-+ struct { u8 data8a, data8b, data8c, data8d; };
-+ struct { u16 data16a, data16b; };
-+ struct { u32 data32; };
-+ };
-+#else
-+ u8 index, hss_port, unused, cmd;
-+ union {
-+ struct { u8 data8d, data8c, data8b, data8a; };
-+ struct { u16 data16b, data16a; };
-+ struct { u32 data32; };
-+ };
-+#endif
-+};
++extern const char *npe_names[];
+
-+/* HDLC packet descriptor */
-+struct desc {
-+ u32 next; /* pointer to next buffer, unused */
++struct npe_regs {
++ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
++ u32 action_points[4];
++ u32 watchpoint_fifo, watch_count;
++ u32 profile_count;
++ u32 messaging_status, messaging_control;
++ u32 mailbox_status, /*messaging_*/ in_out_fifo;
++};
+
-+#ifdef __ARMEB__
-+ u16 buf_len; /* buffer length */
-+ u16 pkt_len; /* packet length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u8 status;
-+ u8 error_count;
-+ u16 __reserved;
-+#else
-+ u16 pkt_len; /* packet length */
-+ u16 buf_len; /* buffer length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u16 __reserved;
-+ u8 error_count;
-+ u8 status;
-+#endif
-+ u32 __reserved1[4];
++struct npe {
++ struct resource *mem_res;
++ struct npe_regs __iomem *regs;
++ u32 regs_phys;
++ int id;
++ int valid;
+};
+
+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
++static inline const char *npe_name(struct npe *npe)
++{
++ return npe_names[npe->id];
++}
+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
++int npe_running(struct npe *npe);
++int npe_send_message(struct npe *npe, const void *msg, const char *what);
++int npe_recv_message(struct npe *npe, void *msg, const char *what);
++int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
++int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
++struct npe *npe_request(int id);
++void npe_release(struct npe *npe);
+
-+/*****************************************************************************
-+ * global variables
-+ ****************************************************************************/
++#endif /* __IXP4XX_NPE_H */
+diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+new file mode 100644
+index 0000000..e833013
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+@@ -0,0 +1,274 @@
++/*
++ * Intel IXP4xx Queue Manager driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
+
-+static int ports_open;
-+static struct dma_pool *dma_pool;
++#include <linux/ioport.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <asm/arch/qmgr.h>
+
-+static const struct {
-+ int tx, txdone, rx, rxfree;
-+}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
-+ HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
-+ { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
-+ HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
-+};
++#define DEBUG 0
+
-+/*****************************************************************************
-+ * utility functions
-+ ****************************************************************************/
++struct qmgr_regs __iomem *qmgr_regs;
++static struct resource *mem_res;
++static spinlock_t qmgr_lock;
++static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
++static void (*irq_handlers[HALF_QUEUES])(void *pdev);
++static void *irq_pdevs[HALF_QUEUES];
+
-+static inline struct port* dev_to_port(struct net_device *dev)
++void qmgr_set_irq(unsigned int queue, int src,
++ void (*handler)(void *pdev), void *pdev)
+{
-+ return dev_to_hdlc(dev)->priv;
++ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
++ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
++ unsigned long flags;
++
++ src &= 7;
++ spin_lock_irqsave(&qmgr_lock, flags);
++ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
++ irq_handlers[queue] = handler;
++ irq_pdevs[queue] = pdev;
++ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++
++static irqreturn_t qmgr_irq1(int irq, void *pdev)
+{
+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
++ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
++ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
++
++ for (i = 0; i < HALF_QUEUES; i++)
++ if (val & (1 << i))
++ irq_handlers[i](irq_pdevs[i]);
++
++ return val ? IRQ_HANDLED : 0;
+}
-+#endif
+
-+static inline void debug_pkt(struct net_device *dev, const char *func,
-+ u8 *data, int len)
++
++void qmgr_enable_irq(unsigned int queue)
+{
-+#if DEBUG_PKT_BYTES
-+ int i;
++ unsigned long flags;
+
-+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
-+ for (i = 0; i < len; i++) {
-+ if (i >= DEBUG_PKT_BYTES)
-+ break;
-+ printk("%s%02X", !(i % 4) ? " " : "", data[i]);
-+ }
-+ printk("\n");
-+#endif
++ spin_lock_irqsave(&qmgr_lock, flags);
++ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
++ &qmgr_regs->irqen[0]);
++ spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
++void qmgr_disable_irq(unsigned int queue)
++{
++ unsigned long flags;
+
-+static inline void debug_desc(u32 phys, struct desc *desc)
++ spin_lock_irqsave(&qmgr_lock, flags);
++ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
++ &qmgr_regs->irqen[0]);
++ spin_unlock_irqrestore(&qmgr_lock, flags);
++}
++
++static inline void shift_mask(u32 *mask)
+{
-+#if DEBUG_DESC
-+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
-+ phys, desc->next, desc->buf_len, desc->pkt_len,
-+ desc->data, desc->status, desc->error_count);
-+#endif
++ mask[3] = mask[3] << 1 | mask[2] >> 31;
++ mask[2] = mask[2] << 1 | mask[1] >> 31;
++ mask[1] = mask[1] << 1 | mask[0] >> 31;
++ mask[0] <<= 1;
+}
+
-+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
-+{
-+#if DEBUG_QUEUES
-+ static struct {
-+ int queue;
-+ char *name;
-+ } names[] = {
-+ { HSS0_PKT_TX0_QUEUE, "TX#0 " },
-+ { HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
-+ { HSS0_PKT_RX_QUEUE, "RX#0 " },
-+ { HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
-+ { HSS1_PKT_TX0_QUEUE, "TX#1 " },
-+ { HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
-+ { HSS1_PKT_RX_QUEUE, "RX#1 " },
-+ { HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
-+ };
-+ int i;
++int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
++ unsigned int nearly_empty_watermark,
++ unsigned int nearly_full_watermark)
++{
++ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
++ int err;
++
++ if (queue >= HALF_QUEUES)
++ return -ERANGE;
++
++ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
++ return -EINVAL;
++
++ switch (len) {
++ case 16:
++ cfg = 0 << 24;
++ mask[0] = 0x1;
++ break;
++ case 32:
++ cfg = 1 << 24;
++ mask[0] = 0x3;
++ break;
++ case 64:
++ cfg = 2 << 24;
++ mask[0] = 0xF;
++ break;
++ case 128:
++ cfg = 3 << 24;
++ mask[0] = 0xFF;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ cfg |= nearly_empty_watermark << 26;
++ cfg |= nearly_full_watermark << 29;
++ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
++ mask[1] = mask[2] = mask[3] = 0;
++
++ if (!try_module_get(THIS_MODULE))
++ return -ENODEV;
++
++ spin_lock_irq(&qmgr_lock);
++ if (__raw_readl(&qmgr_regs->sram[queue])) {
++ err = -EBUSY;
++ goto err;
++ }
++
++ while (1) {
++ if (!(used_sram_bitmap[0] & mask[0]) &&
++ !(used_sram_bitmap[1] & mask[1]) &&
++ !(used_sram_bitmap[2] & mask[2]) &&
++ !(used_sram_bitmap[3] & mask[3]))
++ break; /* found free space */
++
++ addr++;
++ shift_mask(mask);
++ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
++ printk(KERN_ERR "qmgr: no free SRAM space for"
++ " queue %i\n", queue);
++ err = -ENOMEM;
++ goto err;
++ }
++ }
+
-+ for (i = 0; i < ARRAY_SIZE(names); i++)
-+ if (names[i].queue == queue)
-+ break;
++ used_sram_bitmap[0] |= mask[0];
++ used_sram_bitmap[1] |= mask[1];
++ used_sram_bitmap[2] |= mask[2];
++ used_sram_bitmap[3] |= mask[3];
++ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
++ spin_unlock_irq(&qmgr_lock);
+
-+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
-+ i < ARRAY_SIZE(names) ? names[i].name : "",
-+ is_get ? "->" : "<-", phys);
++#if DEBUG
++ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
++ queue, addr);
+#endif
-+}
++ return 0;
+
-+static inline u32 queue_get_entry(unsigned int queue)
-+{
-+ u32 phys = qmgr_get_entry(queue);
-+ debug_queue(queue, 1, phys);
-+ return phys;
++err:
++ spin_unlock_irq(&qmgr_lock);
++ module_put(THIS_MODULE);
++ return err;
+}
+
-+static inline int queue_get_desc(unsigned int queue, struct port *port,
-+ int is_tx)
++void qmgr_release_queue(unsigned int queue)
+{
-+ u32 phys, tab_phys, n_desc;
-+ struct desc *tab;
-+
-+ if (!(phys = queue_get_entry(queue)))
-+ return -1;
++ u32 cfg, addr, mask[4];
+
-+ BUG_ON(phys & 0x1F);
-+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
-+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
-+ n_desc = (phys - tab_phys) / sizeof(struct desc);
-+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
-+ debug_desc(phys, &tab[n_desc]);
-+ BUG_ON(tab[n_desc].next);
-+ return n_desc;
-+}
++ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+
-+static inline void queue_put_desc(unsigned int queue, u32 phys,
-+ struct desc *desc)
-+{
-+ debug_queue(queue, 0, phys);
-+ debug_desc(phys, desc);
-+ BUG_ON(phys & 0x1F);
-+ qmgr_put_entry(queue, phys);
-+ BUG_ON(qmgr_stat_overflow(queue));
-+}
++ spin_lock_irq(&qmgr_lock);
++ cfg = __raw_readl(&qmgr_regs->sram[queue]);
++ addr = (cfg >> 14) & 0xFF;
+
++ BUG_ON(!addr); /* not requested */
+
-+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
-+{
-+#ifdef __ARMEB__
-+ dma_unmap_single(&port->netdev->dev, desc->data,
-+ desc->buf_len, DMA_TO_DEVICE);
-+#else
-+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ ALIGN((desc->data & 3) + desc->buf_len, 4),
-+ DMA_TO_DEVICE);
-+#endif
-+}
++ switch ((cfg >> 24) & 3) {
++ case 0: mask[0] = 0x1; break;
++ case 1: mask[0] = 0x3; break;
++ case 2: mask[0] = 0xF; break;
++ case 3: mask[0] = 0xFF; break;
++ }
+
++ while (addr--)
++ shift_mask(mask);
+
-+static void hss_hdlc_set_carrier(void *pdev, int carrier)
-+{
-+ struct net_device *dev = pdev;
-+ if (carrier)
-+ netif_carrier_on(dev);
-+ else
-+ netif_carrier_off(dev);
-+}
++ __raw_writel(0, &qmgr_regs->sram[queue]);
+
-+static void hss_hdlc_rx_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = dev_to_port(dev);
++ used_sram_bitmap[0] &= ~mask[0];
++ used_sram_bitmap[1] &= ~mask[1];
++ used_sram_bitmap[2] &= ~mask[2];
++ used_sram_bitmap[3] &= ~mask[3];
++ irq_handlers[queue] = NULL; /* catch IRQ bugs */
++ spin_unlock_irq(&qmgr_lock);
+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
++ module_put(THIS_MODULE);
++#if DEBUG
++ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
+#endif
-+ qmgr_disable_irq(queue_ids[port->id].rx);
-+ netif_rx_schedule(dev);
+}
+
-+static int hss_hdlc_poll(struct net_device *dev, int *budget)
++static int qmgr_init(void)
+{
-+ struct port *port = dev_to_port(dev);
-+ unsigned int rxq = queue_ids[port->id].rx;
-+ unsigned int rxfreeq = queue_ids[port->id].rxfree;
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ int quota = dev->quota, received = 0;
++ int i, err;
++ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
++ IXP4XX_QMGR_REGION_SIZE,
++ "IXP4xx Queue Manager");
++ if (mem_res == NULL)
++ return -EBUSY;
+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
-+#endif
++ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
++ if (qmgr_regs == NULL) {
++ err = -ENOMEM;
++ goto error_map;
++ }
+
-+ while (quota) {
-+ struct sk_buff *skb;
-+ struct desc *desc;
-+ int n;
-+#ifdef __ARMEB__
-+ struct sk_buff *temp;
-+ u32 phys;
-+#endif
++ /* reset qmgr registers */
++ for (i = 0; i < 4; i++) {
++ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
++ __raw_writel(0, &qmgr_regs->irqsrc[i]);
++ }
++ for (i = 0; i < 2; i++) {
++ __raw_writel(0, &qmgr_regs->stat2[i]);
++ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
++ __raw_writel(0, &qmgr_regs->irqen[i]);
++ }
+
-+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
-+ dev->quota -= received; /* No packet received */
-+ *budget -= received;
-+ received = 0;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
-+ " netif_rx_complete\n", dev->name);
-+#endif
-+ netif_rx_complete(dev);
-+ qmgr_enable_irq(rxq);
-+ if (!qmgr_stat_empty(rxq) &&
-+ netif_rx_reschedule(dev, 0)) {
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
-+ " netif_rx_reschedule successed\n",
-+ dev->name);
-+#endif
-+ qmgr_disable_irq(rxq);
-+ continue;
-+ }
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
-+ dev->name);
-+#endif
-+ return 0; /* all work done */
-+ }
++ for (i = 0; i < QUEUES; i++)
++ __raw_writel(0, &qmgr_regs->sram[i]);
+
-+ desc = rx_desc_ptr(port, n);
++ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
++ "IXP4xx Queue Manager", NULL);
++ if (err) {
++ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
++ IRQ_IXP4XX_QM1);
++ goto error_irq;
++ }
+
-+ if (desc->error_count) /* FIXME - remove printk */
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
-+ " errors %u\n", dev->name, desc->status,
-+ desc->error_count);
++ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
++ spin_lock_init(&qmgr_lock);
+
-+ skb = NULL;
-+ switch (desc->status) {
-+ case 0:
-+#ifdef __ARMEB__
-+ if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
-+ phys = dma_map_single(&dev->dev, skb->data,
-+ RX_SIZE,
-+ DMA_FROM_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+ dev_kfree_skb(skb);
-+ skb = NULL;
-+ }
-+ }
-+#else
-+ skb = netdev_alloc_skb(dev, desc->pkt_len);
-+#endif
-+ if (!skb)
-+ stats->rx_dropped++;
-+ break;
-+ case ERR_HDLC_ALIGN:
-+ case ERR_HDLC_ABORT:
-+ stats->rx_frame_errors++;
-+ stats->rx_errors++;
-+ break;
-+ case ERR_HDLC_FCS:
-+ stats->rx_crc_errors++;
-+ stats->rx_errors++;
-+ break;
-+ case ERR_HDLC_TOO_LONG:
-+ stats->rx_length_errors++;
-+ stats->rx_errors++;
-+ break;
-+ default: /* FIXME - remove printk */
-+ printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
-+ " errors %u\n", dev->name, desc->status,
-+ desc->error_count);
-+ stats->rx_errors++;
-+ }
++ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
++ return 0;
++
++error_irq:
++ iounmap(qmgr_regs);
++error_map:
++ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
++ return err;
++}
+
-+ if (!skb) {
-+ /* put the desc back on RX-ready queue */
-+ desc->buf_len = RX_SIZE;
-+ desc->pkt_len = desc->status = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ continue;
-+ }
++static void qmgr_remove(void)
++{
++ free_irq(IRQ_IXP4XX_QM1, NULL);
++ synchronize_irq(IRQ_IXP4XX_QM1);
++ iounmap(qmgr_regs);
++ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
++}
+
-+ /* process received frame */
-+#ifdef __ARMEB__
-+ temp = skb;
-+ skb = port->rx_buff_tab[n];
-+ dma_unmap_single(&dev->dev, desc->data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+#else
-+ dma_sync_single(&dev->dev, desc->data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
-+ ALIGN(desc->pkt_len, 4) / 4);
-+#endif
-+ skb_put(skb, desc->pkt_len);
++module_init(qmgr_init);
++module_exit(qmgr_remove);
+
-+ debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Krzysztof Halasa");
+
-+ skb->protocol = hdlc_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ stats->rx_packets++;
-+ stats->rx_bytes += skb->len;
-+ netif_receive_skb(skb);
++EXPORT_SYMBOL(qmgr_regs);
++EXPORT_SYMBOL(qmgr_set_irq);
++EXPORT_SYMBOL(qmgr_enable_irq);
++EXPORT_SYMBOL(qmgr_disable_irq);
++EXPORT_SYMBOL(qmgr_request_queue);
++EXPORT_SYMBOL(qmgr_release_queue);
+diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+new file mode 100644
+index 0000000..83c137e
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -0,0 +1,741 @@
++/*
++ * Intel IXP4xx Network Processor Engine driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ *
++ * The code is based on publicly available information:
++ * - Intel IXP4xx Developer's Manual and other e-papers
++ * - Intel IXP400 Access Library Software (BSD license)
++ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
++ * Thanks, Christian.
++ */
+
-+ /* put the new buffer on RX-free queue */
-+#ifdef __ARMEB__
-+ port->rx_buff_tab[n] = temp;
-+ desc->data = phys;
-+#endif
-+ desc->buf_len = RX_SIZE;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ quota--;
-+ received++;
-+ }
-+ dev->quota -= received;
-+ *budget -= received;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
-+#endif
-+ return 1; /* not all work done */
-+}
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/firmware.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <asm/arch/npe.h>
+
++#define DEBUG_MSG 0
++#define DEBUG_FW 0
+
-+static void hss_hdlc_txdone_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = dev_to_port(dev);
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ int n_desc;
++#define NPE_COUNT 3
++#define MAX_RETRIES 1000 /* microseconds */
++#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
++#define NPE_46X_DATA_SIZE 0x1000
++#define NPE_A_42X_INSTR_SIZE 0x1000
++#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
++#define NPE_46X_INSTR_SIZE 0x1000
++#define REGS_SIZE 0x1000
+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
-+#endif
-+ while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
-+ port, 1)) >= 0) {
-+ struct desc *desc;
-+ int start;
++#define NPE_PHYS_REG 32
+
-+ desc = tx_desc_ptr(port, n_desc);
++#define FW_MAGIC 0xFEEDF00D
++#define FW_BLOCK_TYPE_INSTR 0x0
++#define FW_BLOCK_TYPE_DATA 0x1
++#define FW_BLOCK_TYPE_EOF 0xF
+
-+ stats->tx_packets++;
-+ stats->tx_bytes += desc->pkt_len;
++/* NPE exec status (read) and command (write) */
++#define CMD_NPE_STEP 0x01
++#define CMD_NPE_START 0x02
++#define CMD_NPE_STOP 0x03
++#define CMD_NPE_CLR_PIPE 0x04
++#define CMD_CLR_PROFILE_CNT 0x0C
++#define CMD_RD_INS_MEM 0x10 /* instruction memory */
++#define CMD_WR_INS_MEM 0x11
++#define CMD_RD_DATA_MEM 0x12 /* data memory */
++#define CMD_WR_DATA_MEM 0x13
++#define CMD_RD_ECS_REG 0x14 /* exec access register */
++#define CMD_WR_ECS_REG 0x15
+
-+ dma_unmap_tx(port, desc);
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
-+ port->netdev->name, port->tx_buff_tab[n_desc]);
-+#endif
-+ free_buffer_irq(port->tx_buff_tab[n_desc]);
-+ port->tx_buff_tab[n_desc] = NULL;
++#define STAT_RUN 0x80000000
++#define STAT_STOP 0x40000000
++#define STAT_CLEAR 0x20000000
++#define STAT_ECS_K 0x00800000 /* pipeline clean */
+
-+ start = qmgr_stat_empty(port->plat->txreadyq);
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, n_desc), desc);
-+ if (start) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
-+ " ready\n", port->netdev->name);
-+#endif
-+ netif_wake_queue(port->netdev);
-+ }
-+ }
-+}
++#define NPE_STEVT 0x1B
++#define NPE_STARTPC 0x1C
++#define NPE_REGMAP 0x1E
++#define NPE_CINDEX 0x1F
+
-+static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ unsigned int txreadyq = port->plat->txreadyq;
-+ int len, offset, bytes, n;
-+ void *mem;
-+ u32 phys;
-+ struct desc *desc;
++#define INSTR_WR_REG_SHORT 0x0000C000
++#define INSTR_WR_REG_BYTE 0x00004000
++#define INSTR_RD_FIFO 0x0F888220
++#define INSTR_RESET_MBOX 0x0FAC8210
+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
-+#endif
++#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
++#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
++#define ECS_BG_CTXT_REG_2 0x02
++#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
++#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
++#define ECS_PRI_1_CTXT_REG_2 0x06
++#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
++#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
++#define ECS_PRI_2_CTXT_REG_2 0x0A
++#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
++#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
++#define ECS_DBG_CTXT_REG_2 0x0E
++#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
+
-+ if (unlikely(skb->len > HDLC_MAX_MRU)) {
-+ dev_kfree_skb(skb);
-+ stats->tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
++#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
++#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
++#define ECS_REG_0_LDUR_BITS 8
++#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
++#define ECS_REG_1_CCTXT_BITS 16
++#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
++#define ECS_REG_1_SELCTXT_BITS 0
++#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
++#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
++#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
+
-+ debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
++/* NPE watchpoint_fifo register bit */
++#define WFIFO_VALID 0x80000000
+
-+ len = skb->len;
-+#ifdef __ARMEB__
-+ offset = 0; /* no need to keep alignment */
-+ bytes = len;
-+ mem = skb->data;
-+#else
-+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
-+ bytes = ALIGN(offset + len, 4);
-+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
-+ dev_kfree_skb(skb);
-+ stats->tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
-+ dev_kfree_skb(skb);
-+#endif
++/* NPE messaging_status register bit definitions */
++#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
++#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
++#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
++#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
++#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
++#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
++#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
++#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
+
-+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+#ifdef __ARMEB__
-+ dev_kfree_skb(skb);
-+#else
-+ kfree(mem);
-+#endif
-+ stats->tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
++/* NPE messaging_control register bit definitions */
++#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
++#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
++#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
++#define MSGCTL_IN_FIFO_WRITE 0x02000000
++
++/* NPE mailbox_status value for reset */
++#define RESET_MBOX_STAT 0x0000F0F0
++
++const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+
-+ n = queue_get_desc(txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
++#define print_npe(pri, npe, fmt, ...) \
++ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
+
-+#ifdef __ARMEB__
-+ port->tx_buff_tab[n] = skb;
++#if DEBUG_MSG
++#define debug_msg(npe, fmt, ...) \
++ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
+#else
-+ port->tx_buff_tab[n] = mem;
++#define debug_msg(npe, fmt, ...)
+#endif
-+ desc->data = phys + offset;
-+ desc->buf_len = desc->pkt_len = len;
+
-+ wmb();
-+ queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
-+ dev->trans_start = jiffies;
++static struct {
++ u32 reg, val;
++} ecs_reset[] = {
++ { ECS_BG_CTXT_REG_0, 0xA0000000 },
++ { ECS_BG_CTXT_REG_1, 0x01000000 },
++ { ECS_BG_CTXT_REG_2, 0x00008000 },
++ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
++ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
++ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
++ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
++ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
++ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
++ { ECS_DBG_CTXT_REG_0, 0x20000000 },
++ { ECS_DBG_CTXT_REG_1, 0x00000000 },
++ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
++ { ECS_INSTRUCT_REG, 0x1003C00F },
++};
+
-+ if (qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
-+#endif
-+ netif_stop_queue(dev);
-+ /* we could miss TX ready interrupt */
-+ if (!qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
-+ dev->name);
-+#endif
-+ netif_wake_queue(dev);
-+ }
++static struct npe npe_tab[NPE_COUNT] = {
++ {
++ .id = 0,
++ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
++ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
++ }, {
++ .id = 1,
++ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
++ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
++ }, {
++ .id = 2,
++ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
++ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
+ }
++};
+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
-+#endif
-+ return NETDEV_TX_OK;
++int npe_running(struct npe *npe)
++{
++ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
+}
+
-+
-+static int request_hdlc_queues(struct port *port)
++static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
+{
-+ int err;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
-+ if (err)
-+ return err;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rxfree;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rx;
-+
-+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_tx;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_txready;
-+ return 0;
-+
-+rel_txready:
-+ qmgr_release_queue(port->plat->txreadyq);
-+rel_tx:
-+ qmgr_release_queue(queue_ids[port->id].tx);
-+rel_rx:
-+ qmgr_release_queue(queue_ids[port->id].rx);
-+rel_rxfree:
-+ qmgr_release_queue(queue_ids[port->id].rxfree);
-+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
-+ port->netdev->name);
-+ return err;
++ __raw_writel(data, &npe->regs->exec_data);
++ __raw_writel(addr, &npe->regs->exec_addr);
++ __raw_writel(cmd, &npe->regs->exec_status_cmd);
+}
+
-+static void release_hdlc_queues(struct port *port)
++static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
+{
-+ qmgr_release_queue(queue_ids[port->id].rxfree);
-+ qmgr_release_queue(queue_ids[port->id].rx);
-+ qmgr_release_queue(queue_ids[port->id].txdone);
-+ qmgr_release_queue(queue_ids[port->id].tx);
-+ qmgr_release_queue(port->plat->txreadyq);
++ __raw_writel(addr, &npe->regs->exec_addr);
++ __raw_writel(cmd, &npe->regs->exec_status_cmd);
++ /* Iintroduce extra read cycles after issuing read command to NPE
++ so that we read the register after the NPE has updated it.
++ This is to overcome race condition between XScale and NPE */
++ __raw_readl(&npe->regs->exec_data);
++ __raw_readl(&npe->regs->exec_data);
++ return __raw_readl(&npe->regs->exec_data);
+}
+
-+static int init_hdlc_queues(struct port *port)
++static void npe_clear_active(struct npe *npe, u32 reg)
+{
-+ int i;
-+
-+ if (!ports_open)
-+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-+ POOL_ALLOC_SIZE, 32, 0)))
-+ return -ENOMEM;
-+
-+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
-+ &port->desc_tab_phys)))
-+ return -ENOMEM;
-+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
-+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
-+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
-+
-+ /* Setup RX buffers */
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff;
-+ void *data;
-+#ifdef __ARMEB__
-+ if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
-+ return -ENOMEM;
-+ data = buff->data;
-+#else
-+ if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
-+ return -ENOMEM;
-+ data = buff;
-+#endif
-+ desc->buf_len = RX_SIZE;
-+ desc->data = dma_map_single(&port->netdev->dev, data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(desc->data)) {
-+ free_buffer(buff);
-+ return -EIO;
-+ }
-+ port->rx_buff_tab[i] = buff;
-+ }
-+
-+ return 0;
++ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
++ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
+}
+
-+static void destroy_hdlc_queues(struct port *port)
++static void npe_start(struct npe *npe)
+{
-+ int i;
-+
-+ if (port->desc_tab) {
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff = port->rx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_single(&port->netdev->dev,
-+ desc->data, RX_SIZE,
-+ DMA_FROM_DEVICE);
-+ free_buffer(buff);
-+ }
-+ }
-+ for (i = 0; i < TX_DESCS; i++) {
-+ struct desc *desc = tx_desc_ptr(port, i);
-+ buffer_t *buff = port->tx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_tx(port, desc);
-+ free_buffer(buff);
-+ }
-+ }
-+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
-+ port->desc_tab = NULL;
-+ }
++ /* ensure only Background Context Stack Level is active */
++ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
++ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
++ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
+
-+ if (!ports_open && dma_pool) {
-+ dma_pool_destroy(dma_pool);
-+ dma_pool = NULL;
-+ }
++ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
++ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
+}
+
-+static int hss_hdlc_open(struct net_device *dev)
++static void npe_stop(struct npe *npe)
+{
-+ struct port *port = dev_to_port(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int i, err;
-+
-+ if (!npe_running(npe)) {
-+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
-+ if (err)
-+ return err;
-+ }
++ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
++ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
++}
+
-+ if ((err = hdlc_open(dev)) != 0)
-+ return err;
++static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
++ u32 ldur)
++{
++ u32 wc;
++ int i;
+
-+ if (port->plat->open)
-+ if ((err = port->plat->open(port->id, port->netdev,
-+ hss_hdlc_set_carrier)) != 0)
-+ goto err_hdlc_close;
++ /* set the Active bit, and the LDUR, in the debug level */
++ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
++ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
+
-+ /* HSS main configuration */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = 0; /* offset in HSS config */
++ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
++ the instruction, and set SELCTXT at ECS DEBUG Level to specify
++ which context store to access.
++ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
++ */
++ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
++ (ctx << ECS_REG_1_CCTXT_BITS) |
++ (ctx << ECS_REG_1_SELCTXT_BITS));
+
-+ msg.data32 = PCR_FRM_PULSE_DISABLED |
-+ PCR_SOF_NO_FBIT |
-+ PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE;
++ /* clear the pipeline */
++ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
+
-+ if (port->clock_type == CLOCK_INT)
-+ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
++ /* load NPE instruction into the instruction register */
++ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
+
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
-+ goto err_plat_close; /* 0: TX PCR */
++ /* we need this value later to wait for completion of NPE execution
++ step */
++ wc = __raw_readl(&npe->regs->watch_count);
+
-+ msg.index = 4;
-+ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
-+ goto err_plat_close; /* 4: RX PCR */
++ /* issue a Step One command via the Execution Control register */
++ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
+
-+ msg.index = 8;
-+ msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
-+ goto err_plat_close; /* 8: Core CR */
++ /* Watch Count register increments when NPE completes an instruction */
++ for (i = 0; i < MAX_RETRIES; i++) {
++ if (wc != __raw_readl(&npe->regs->watch_count))
++ return 0;
++ udelay(1);
++ }
+
-+ msg.index = 12;
-+ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
-+ goto err_plat_close; /* 12: CLK CR */
++ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
++ return -ETIMEDOUT;
++}
+
-+ msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
-+ msg.index = 16;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
-+ goto err_plat_close; /* 16: TX FCR */
++static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
++ u8 val, u32 ctx)
++{
++ /* here we build the NPE assembler instruction: mov8 d0, #0 */
++ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
++ addr << 9 | /* base Operand */
++ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
++ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
++ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
++}
+
-+ msg.index = 20;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
-+ goto err_plat_close; /* 20: RX FCR */
++static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
++ u16 val, u32 ctx)
++{
++ /* here we build the NPE assembler instruction: mov16 d0, #0 */
++ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
++ addr << 9 | /* base Operand */
++ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
++ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
++ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
++}
+
-+ msg.data32 = 0; /* Fill LUT with HDLC timeslots */
-+ for (i = 0; i < 32 / LUT_BITS; i++)
-+ msg.data32 |= TDMMAP_HDLC << (LUT_BITS * i);
++static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
++ u32 val, u32 ctx)
++{
++ /* write in 16 bit steps first the high and then the low value */
++ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
++ return -ETIMEDOUT;
++ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
++}
+
-+ for (i = 0; i < 2 /* TX and RX */ * TIMESLOTS * LUT_BITS / 8; i += 4) {
-+ msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
-+ goto err_plat_close;
-+ }
++static int npe_reset(struct npe *npe)
++{
++ u32 val, ctl, exec_count, ctx_reg2;
++ int i;
+
-+ /* HDLC mode configuration */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_NUM_PIPES_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = PKT_NUM_PIPES;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
-+ goto err_plat_close;
++ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
++ 0x3F3FFFFF;
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = PKT_PIPE_FIFO_SIZEW;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
-+ goto err_plat_close;
++ /* disable parity interrupt */
++ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = 0x7F7F7F7F;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
-+ goto err_plat_close;
++ /* pre exec - debug instruction */
++ /* turn off the halt bit by clearing Execution Count register. */
++ exec_count = __raw_readl(&npe->regs->exec_count);
++ __raw_writel(0, &npe->regs->exec_count);
++ /* ensure that IF and IE are on (temporarily), so that we don't end up
++ stepping forever */
++ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
++ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
++ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_LOAD;
-+ msg.hss_port = port->id;
-+ if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
-+ goto err_plat_close;
-+ if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
-+ goto err_plat_close;
++ /* clear the FIFOs */
++ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
++ ;
++ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
++ /* read from the outFIFO until empty */
++ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
++ __raw_readl(&npe->regs->in_out_fifo));
+
-+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
-+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
-+ printk(KERN_DEBUG "%s: unexpected message received in"
-+ " response to HSS_LOAD_CONFIG\n", npe_name(npe));
-+ err = EIO;
-+ goto err_plat_close;
-+ }
++ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
++ /* step execution of the NPE intruction to read inFIFO using
++ the Debug Executing Context stack */
++ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
++ return -ETIMEDOUT;
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = port->hdlc_cfg; /* rx_cfg */
-+ msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
-+ goto err_plat_close;
++ /* reset the mailbox reg from the XScale side */
++ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
++ /* from NPE side */
++ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
++ return -ETIMEDOUT;
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_MODE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = NPE_PKT_MODE_HDLC;
-+ /* msg.data8b = inv_mask */
-+ /* msg.data8c = or_mask */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
-+ goto err_plat_close;
++ /* Reset the physical registers in the NPE register file */
++ for (val = 0; val < NPE_PHYS_REG; val++) {
++ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
++ return -ETIMEDOUT;
++ /* address is either 0 or 4 */
++ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
++ return -ETIMEDOUT;
++ }
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data16a = HDLC_MAX_MRU;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
-+ goto err_plat_close;
++ /* Reset the context store = each context's Context Store registers */
+
-+ if ((err = request_hdlc_queues(port)) != 0)
-+ goto err_plat_close;
++ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
++ for Background ECS, to set where NPE starts executing code */
++ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
++ val &= ~ECS_REG_0_NEXTPC_MASK;
++ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
++ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
+
-+ if ((err = init_hdlc_queues(port)) != 0)
-+ goto err_destroy_queues;
++ for (i = 0; i < 16; i++) {
++ if (i) { /* Context 0 has no STEVT nor STARTPC */
++ /* STEVT = off, 0x80 */
++ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
++ return -ETIMEDOUT;
++ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
++ return -ETIMEDOUT;
++ }
++ /* REGMAP = d0->p0, d8->p2, d16->p4 */
++ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
++ return -ETIMEDOUT;
++ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
++ return -ETIMEDOUT;
++ }
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FLOW_ENABLE;
-+ msg.hss_port = port->id;
-+ if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
-+ goto err_destroy_queues;
++ /* post exec */
++ /* clear active bit in debug level */
++ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
++ /* clear the pipeline */
++ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
++ /* restore previous values */
++ __raw_writel(exec_count, &npe->regs->exec_count);
++ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
+
-+ /* Populate queues with buffers, no failure after this point */
-+ for (i = 0; i < TX_DESCS; i++)
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
++ /* write reset values to Execution Context Stack registers */
++ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
++ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
++ ecs_reset[val].val);
+
-+ for (i = 0; i < RX_DESCS; i++)
-+ queue_put_desc(queue_ids[port->id].rxfree,
-+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
++ /* clear the profile counter */
++ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
+
-+ netif_start_queue(dev);
++ __raw_writel(0, &npe->regs->exec_count);
++ __raw_writel(0, &npe->regs->action_points[0]);
++ __raw_writel(0, &npe->regs->action_points[1]);
++ __raw_writel(0, &npe->regs->action_points[2]);
++ __raw_writel(0, &npe->regs->action_points[3]);
++ __raw_writel(0, &npe->regs->watch_count);
+
-+ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_hdlc_rx_irq, dev);
++ val = ixp4xx_read_feature_bits();
++ /* reset the NPE */
++ ixp4xx_write_feature_bits(val &
++ ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
++ for (i = 0; i < MAX_RETRIES; i++) {
++ if (!(ixp4xx_read_feature_bits() &
++ (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
++ break; /* reset completed */
++ udelay(1);
++ }
++ if (i == MAX_RETRIES)
++ return -ETIMEDOUT;
+
-+ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_hdlc_txdone_irq, dev);
-+ qmgr_enable_irq(queue_ids[port->id].txdone);
++ /* deassert reset */
++ ixp4xx_write_feature_bits(val |
++ (IXP4XX_FEATURE_RESET_NPEA << npe->id));
++ for (i = 0; i < MAX_RETRIES; i++) {
++ if (ixp4xx_read_feature_bits() &
++ (IXP4XX_FEATURE_RESET_NPEA << npe->id))
++ break; /* NPE is back alive */
++ udelay(1);
++ }
++ if (i == MAX_RETRIES)
++ return -ETIMEDOUT;
+
-+ ports_open++;
-+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
-+ return 0;
++ npe_stop(npe);
+
-+err_destroy_queues:
-+ destroy_hdlc_queues(port);
-+ release_hdlc_queues(port);
-+err_plat_close:
-+ if (port->plat->close)
-+ port->plat->close(port->id, port->netdev);
-+err_hdlc_close:
-+ hdlc_close(dev);
-+ return err;
++ /* restore NPE configuration bus Control Register - parity settings */
++ __raw_writel(ctl, &npe->regs->messaging_control);
++ return 0;
+}
+
-+static int hss_hdlc_close(struct net_device *dev)
++
++int npe_send_message(struct npe *npe, const void *msg, const char *what)
+{
-+ struct port *port = dev_to_port(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int buffs = RX_DESCS; /* allocated RX buffers */
-+ int i;
++ const u32 *send = msg;
++ int cycles = 0;
+
-+ ports_open--;
-+ qmgr_disable_irq(queue_ids[port->id].rx);
-+ netif_stop_queue(dev);
++ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
++ what, send[0], send[1]);
+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FLOW_DISABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
-+ port->id);
-+ /* The upper level would ignore the error anyway */
++ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
++ debug_msg(npe, "NPE input FIFO not empty\n");
++ return -EIO;
+ }
+
-+ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
-+ buffs--;
-+ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
-+ buffs--;
++ __raw_writel(send[0], &npe->regs->in_out_fifo);
+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
-+ " left in NPE\n", dev->name, buffs);
++ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
++ debug_msg(npe, "NPE input FIFO full\n");
++ return -EIO;
++ }
+
-+ buffs = TX_DESCS;
-+ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
-+ buffs--; /* cancel TX */
++ __raw_writel(send[1], &npe->regs->in_out_fifo);
+
-+ i = 0;
-+ do {
-+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ } while (++i < MAX_CLOSE_WAIT);
++ while ((cycles < MAX_RETRIES) &&
++ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
++ udelay(1);
++ cycles++;
++ }
+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
-+ "left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
-+#endif
-+ qmgr_disable_irq(queue_ids[port->id].txdone);
-+ destroy_hdlc_queues(port);
-+ release_hdlc_queues(port);
++ if (cycles == MAX_RETRIES) {
++ debug_msg(npe, "Timeout sending message\n");
++ return -ETIMEDOUT;
++ }
+
-+ if (port->plat->close)
-+ port->plat->close(port->id, port->netdev);
-+ hdlc_close(dev);
++ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
+ return 0;
+}
+
-+
-+static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
-+ unsigned short parity)
++int npe_recv_message(struct npe *npe, void *msg, const char *what)
+{
-+ struct port *port = dev_to_port(dev);
++ u32 *recv = msg;
++ int cycles = 0, cnt = 0;
+
-+ if (encoding != ENCODING_NRZ)
-+ return -EINVAL;
++ debug_msg(npe, "Trying to receive message %s\n", what);
+
-+ switch(parity) {
-+ case PARITY_CRC16_PR1_CCITT:
-+ port->hdlc_cfg = 0;
-+ return 0;
++ while (cycles < MAX_RETRIES) {
++ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
++ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
++ if (cnt == 2)
++ break;
++ } else {
++ udelay(1);
++ cycles++;
++ }
++ }
+
-+ case PARITY_CRC32_PR1_CCITT:
-+ port->hdlc_cfg = PKT_HDLC_CRC_32;
-+ return 0;
++ switch(cnt) {
++ case 1:
++ debug_msg(npe, "Received [%08X]\n", recv[0]);
++ break;
++ case 2:
++ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
++ break;
++ }
+
-+ default:
-+ return -EINVAL;
++ if (cycles == MAX_RETRIES) {
++ debug_msg(npe, "Timeout waiting for message\n");
++ return -ETIMEDOUT;
+ }
-+}
+
++ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
++ return 0;
++}
+
-+static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
+{
-+ const size_t size = sizeof(sync_serial_settings);
-+ sync_serial_settings new_line;
-+ int clk;
-+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
-+ struct port *port = dev_to_port(dev);
++ int result;
++ u32 *send = msg, recv[2];
+
-+ if (cmd != SIOCWANDEV)
-+ return hdlc_ioctl(dev, ifr, cmd);
++ if ((result = npe_send_message(npe, msg, what)) != 0)
++ return result;
++ if ((result = npe_recv_message(npe, recv, what)) != 0)
++ return result;
+
-+ switch(ifr->ifr_settings.type) {
-+ case IF_GET_IFACE:
-+ ifr->ifr_settings.type = IF_IFACE_V35;
-+ if (ifr->ifr_settings.size < size) {
-+ ifr->ifr_settings.size = size; /* data size wanted */
-+ return -ENOBUFS;
-+ }
-+ memset(&new_line, 0, sizeof(new_line));
-+ new_line.clock_type = port->clock_type;
-+ new_line.clock_rate = port->clock_rate;
-+ new_line.loopback = port->loopback;
-+ if (copy_to_user(line, &new_line, size))
-+ return -EFAULT;
-+ return 0;
++ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
++ debug_msg(npe, "Message %s: unexpected message received\n",
++ what);
++ return -EIO;
++ }
++ return 0;
++}
+
-+ case IF_IFACE_SYNC_SERIAL:
-+ case IF_IFACE_V35:
-+ if(!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (dev->flags & IFF_UP)
-+ return -EBUSY; /* Cannot change parameters when open */
+
-+ if (copy_from_user(&new_line, line, size))
-+ return -EFAULT;
++int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
++{
++ const struct firmware *fw_entry;
+
-+ clk = new_line.clock_type;
-+ if (port->plat->set_clock)
-+ clk = port->plat->set_clock(port->id, clk);
++ struct dl_block {
++ u32 type;
++ u32 offset;
++ } *blk;
+
-+ if (clk != CLOCK_EXT && clk != CLOCK_INT)
-+ return -EINVAL; /* No such clock setting */
++ struct dl_image {
++ u32 magic;
++ u32 id;
++ u32 size;
++ union {
++ u32 data[0];
++ struct dl_block blocks[0];
++ };
++ } *image;
+
-+ if (new_line.loopback != 0 && new_line.loopback != 1)
-+ return -EINVAL;
++ struct dl_codeblock {
++ u32 npe_addr;
++ u32 size;
++ u32 data[0];
++ } *cb;
+
-+ port->clock_type = clk; /* Update settings */
-+ port->clock_rate = new_line.clock_rate;
-+ port->loopback = new_line.loopback;
-+ return 0;
++ int i, j, err, data_size, instr_size, blocks, table_end;
++ u32 cmd;
+
-+ default:
-+ return hdlc_ioctl(dev, ifr, cmd);
++ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
++ return err;
++
++ err = -EINVAL;
++ if (fw_entry->size < sizeof(struct dl_image)) {
++ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
++ goto err;
+ }
-+}
++ image = (struct dl_image*)fw_entry->data;
+
++#if DEBUG_FW
++ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
++ image->magic, image->id, image->size, image->size * 4);
++#endif
+
-+static int __devinit hss_init_one(struct platform_device *pdev)
-+{
-+ struct port *port;
-+ struct net_device *dev;
-+ hdlc_device *hdlc;
-+ int err;
++ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
++ image->id = swab32(image->id);
++ image->size = swab32(image->size);
++ } else if (image->magic != FW_MAGIC) {
++ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
++ image->magic);
++ goto err;
++ }
++ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
++ print_npe(KERN_ERR, npe,
++ "inconsistent size of firmware file\n");
++ goto err;
++ }
++ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
++ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
++ goto err;
++ }
++ if (image->magic == swab32(FW_MAGIC))
++ for (i = 0; i < image->size; i++)
++ image->data[i] = swab32(image->data[i]);
++
++ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
++ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
++ "IXP42x\n");
++ goto err;
++ }
++
++ if (npe_running(npe)) {
++ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
++ "already running\n");
++ err = -EBUSY;
++ goto err;
++ }
++#if 0
++ npe_stop(npe);
++ npe_reset(npe);
++#endif
+
-+ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+ platform_set_drvdata(pdev, port);
-+ port->id = pdev->id;
++ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
++ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
++ (image->id >> 8) & 0xFF, image->id & 0xFF);
+
-+ if ((port->npe = npe_request(0)) == NULL) {
-+ err = -ENOSYS;
-+ goto err_free;
++ if (!cpu_is_ixp46x()) {
++ if (!npe->id)
++ instr_size = NPE_A_42X_INSTR_SIZE;
++ else
++ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
++ data_size = NPE_42X_DATA_SIZE;
++ } else {
++ instr_size = NPE_46X_INSTR_SIZE;
++ data_size = NPE_46X_DATA_SIZE;
+ }
+
-+ port->plat = pdev->dev.platform_data;
-+ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
-+ err = -ENOMEM;
-+ goto err_plat;
++ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
++ blocks++)
++ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
++ break;
++ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
++ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
++ "found\n");
++ goto err;
+ }
+
-+ SET_MODULE_OWNER(net);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ hdlc = dev_to_hdlc(dev);
-+ hdlc->attach = hss_hdlc_attach;
-+ hdlc->xmit = hss_hdlc_xmit;
-+ dev->open = hss_hdlc_open;
-+ dev->poll = hss_hdlc_poll;
-+ dev->stop = hss_hdlc_close;
-+ dev->do_ioctl = hss_hdlc_ioctl;
-+ dev->weight = 16;
-+ dev->tx_queue_len = 100;
-+ port->clock_type = CLOCK_EXT;
-+ port->clock_rate = 2048000;
++#if DEBUG_FW
++ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
++#endif
+
-+ if (register_hdlc_device(dev)) {
-+ printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
-+ port->id);
-+ err = -ENOBUFS;
-+ goto err_free_netdev;
-+ }
-+ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
-+ return 0;
++ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
++ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
++ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
++ || blk->offset < table_end) {
++ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
++ "firmware block #%i\n", blk->offset, i);
++ goto err;
++ }
+
-+err_free_netdev:
-+ free_netdev(dev);
-+err_plat:
-+ npe_release(port->npe);
-+ platform_set_drvdata(pdev, NULL);
-+err_free:
-+ kfree(port);
-+ return err;
-+}
++ cb = (struct dl_codeblock*)&image->data[blk->offset];
++ if (blk->type == FW_BLOCK_TYPE_INSTR) {
++ if (cb->npe_addr + cb->size > instr_size)
++ goto too_big;
++ cmd = CMD_WR_INS_MEM;
++ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
++ if (cb->npe_addr + cb->size > data_size)
++ goto too_big;
++ cmd = CMD_WR_DATA_MEM;
++ } else {
++ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
++ "type 0x%X\n", i, blk->type);
++ goto err;
++ }
++ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
++ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
++ "fit in firmware image: type %c, start 0x%X,"
++ " length 0x%X\n", i,
++ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
++ cb->npe_addr, cb->size);
++ goto err;
++ }
+
-+static int __devexit hss_remove_one(struct platform_device *pdev)
-+{
-+ struct port *port = platform_get_drvdata(pdev);
++ for (j = 0; j < cb->size; j++)
++ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
++ }
+
-+ unregister_hdlc_device(port->netdev);
-+ free_netdev(port->netdev);
-+ npe_release(port->npe);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(port);
++ npe_start(npe);
++ if (!npe_running(npe))
++ print_npe(KERN_ERR, npe, "unable to start\n");
++ release_firmware(fw_entry);
+ return 0;
-+}
-+
-+static struct platform_driver drv = {
-+ .driver.name = DRV_NAME,
-+ .probe = hss_init_one,
-+ .remove = hss_remove_one,
-+};
+
-+static int __init hss_init_module(void)
-+{
-+ if ((ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
-+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
-+ return -ENOSYS;
-+ return platform_driver_register(&drv);
++too_big:
++ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
++ "memory: type %c, start 0x%X, length 0x%X\n", i,
++ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
++ cb->npe_addr, cb->size);
++err:
++ release_firmware(fw_entry);
++ return err;
+}
+
-+static void __exit hss_cleanup_module(void)
-+{
-+ platform_driver_unregister(&drv);
-+}
+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
-+MODULE_LICENSE("GPL v2");
-+module_init(hss_init_module);
-+module_exit(hss_cleanup_module);
-diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
-index d2523b3..2fa3d6b 100644
---- a/include/asm-arm/arch-ixp4xx/cpu.h
-+++ b/include/asm-arm/arch-ixp4xx/cpu.h
-@@ -28,4 +28,19 @@ extern unsigned int processor_id;
- #define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP465_PROCESSOR_ID_VALUE)
-
-+static inline u32 ixp4xx_read_feature_bits(void)
++struct npe *npe_request(int id)
+{
-+ unsigned int val = ~*IXP4XX_EXP_CFG2;
-+ val &= ~IXP4XX_FEATURE_RESERVED;
-+ if (!cpu_is_ixp46x())
-+ val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-+
-+ return val;
++ if (id < NPE_COUNT)
++ if (npe_tab[id].valid)
++ if (try_module_get(THIS_MODULE))
++ return &npe_tab[id];
++ return NULL;
+}
+
-+static inline void ixp4xx_write_feature_bits(u32 value)
++void npe_release(struct npe *npe)
+{
-+ *IXP4XX_EXP_CFG2 = ~value;
++ module_put(THIS_MODULE);
+}
+
- #endif /* _ASM_ARCH_CPU_H */
-diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
-index 297ceda..73e8dc3 100644
---- a/include/asm-arm/arch-ixp4xx/hardware.h
-+++ b/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -27,13 +27,13 @@
-
- #define pcibios_assign_all_busses() 1
-
-+/* Register locations and bits */
-+#include "ixp4xx-regs.h"
-+
- #ifndef __ASSEMBLER__
- #include <asm/arch/cpu.h>
- #endif
-
--/* Register locations and bits */
--#include "ixp4xx-regs.h"
--
- /* Platform helper functions and definitions */
- #include "platform.h"
-
-diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-index 5d949d7..c704fe8 100644
---- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-@@ -15,10 +15,6 @@
- *
- */
-
--#ifndef __ASM_ARCH_HARDWARE_H__
--#error "Do not include this directly, instead #include <asm/hardware.h>"
--#endif
--
- #ifndef _ASM_ARM_IXP4XX_H_
- #define _ASM_ARM_IXP4XX_H_
-
-@@ -607,4 +603,36 @@
-
- #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-+/* "fuse" bits of IXP_EXP_CFG2 */
-+#define IXP4XX_FEATURE_RCOMP (1 << 0)
-+#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
-+#define IXP4XX_FEATURE_HASH (1 << 2)
-+#define IXP4XX_FEATURE_AES (1 << 3)
-+#define IXP4XX_FEATURE_DES (1 << 4)
-+#define IXP4XX_FEATURE_HDLC (1 << 5)
-+#define IXP4XX_FEATURE_AAL (1 << 6)
-+#define IXP4XX_FEATURE_HSS (1 << 7)
-+#define IXP4XX_FEATURE_UTOPIA (1 << 8)
-+#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
-+#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
-+#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
-+#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
-+#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
-+#define IXP4XX_FEATURE_PCI (1 << 14)
-+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
-+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
-+#define IXP4XX_FEATURE_USB_HOST (1 << 18)
-+#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
-+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
-+#define IXP4XX_FEATURE_RSA (1 << 21)
-+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-+#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-+
-+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
-+ IXP4XX_FEATURE_USB_HOST | \
-+ IXP4XX_FEATURE_NPEA_ETH | \
-+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
-+ IXP4XX_FEATURE_RSA | \
-+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-+
- #endif
-diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h
-new file mode 100644
-index 0000000..37d0511
---- /dev/null
-+++ b/include/asm-arm/arch-ixp4xx/npe.h
-@@ -0,0 +1,39 @@
-+#ifndef __IXP4XX_NPE_H
-+#define __IXP4XX_NPE_H
+
-+#include <linux/kernel.h>
++static int __init npe_init_module(void)
++{
+
-+extern const char *npe_names[];
++ int i, found = 0;
+
-+struct npe_regs {
-+ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
-+ u32 action_points[4];
-+ u32 watchpoint_fifo, watch_count;
-+ u32 profile_count;
-+ u32 messaging_status, messaging_control;
-+ u32 mailbox_status, /*messaging_*/ in_out_fifo;
-+};
++ for (i = 0; i < NPE_COUNT; i++) {
++ struct npe *npe = &npe_tab[i];
++ if (!(ixp4xx_read_feature_bits() &
++ (IXP4XX_FEATURE_RESET_NPEA << i)))
++ continue; /* NPE already disabled or not present */
++ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
++ REGS_SIZE,
++ npe_name(npe)))) {
++ print_npe(KERN_ERR, npe,
++ "failed to request memory region\n");
++ continue;
++ }
+
-+struct npe {
-+ struct resource *mem_res;
-+ struct npe_regs __iomem *regs;
-+ u32 regs_phys;
-+ int id;
-+ int valid;
-+};
++ if (npe_reset(npe))
++ continue;
++ npe->valid = 1;
++ found++;
++ }
+
++ if (!found)
++ return -ENOSYS;
++ return 0;
++}
+
-+static inline const char *npe_name(struct npe *npe)
++static void __exit npe_cleanup_module(void)
+{
-+ return npe_names[npe->id];
++ int i;
++
++ for (i = 0; i < NPE_COUNT; i++)
++ if (npe_tab[i].mem_res) {
++ npe_reset(&npe_tab[i]);
++ release_resource(npe_tab[i].mem_res);
++ }
+}
+
-+int npe_running(struct npe *npe);
-+int npe_send_message(struct npe *npe, const void *msg, const char *what);
-+int npe_recv_message(struct npe *npe, void *msg, const char *what);
-+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
-+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-+struct npe *npe_request(int id);
-+void npe_release(struct npe *npe);
++module_init(npe_init_module);
++module_exit(npe_cleanup_module);
+
-+#endif /* __IXP4XX_NPE_H */
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_LICENSE("GPL v2");
++
++EXPORT_SYMBOL(npe_names);
++EXPORT_SYMBOL(npe_running);
++EXPORT_SYMBOL(npe_request);
++EXPORT_SYMBOL(npe_release);
++EXPORT_SYMBOL(npe_load_firmware);
++EXPORT_SYMBOL(npe_send_message);
++EXPORT_SYMBOL(npe_recv_message);
++EXPORT_SYMBOL(npe_send_recv_message);
+
+
+From 35acb53f356e80efad803b9460986d9786dc9b96 Mon Sep 17 00:00:00 2001
+From: Krzysztof Halasa <khc@pm.waw.pl>
+Date: Tue, 29 Jan 2008 10:25:57 +1030
+Subject: Headers for IXP4xx built-in Ethernet and WAN drivers (Patch #4714)
+
+Adds platform structs and #defines required by drivers for
+IXP4xx built-in Ethernet and WAN (sync serial) ports.
+
+The actual drivers will reside in drivers/net/arm and
+drivers/net/wan and will be submitted separately.
+
+Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+PATCH FOLLOWS
+KernelVersion: 2.6.24-git5
+
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
-index 2a44d3d..695b9c4 100644
+index 2ce28e3..a1f2b54 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
-@@ -77,8 +77,7 @@ extern unsigned long ixp4xx_exp_bus_size;
+@@ -91,6 +91,27 @@ struct ixp4xx_pata_data {
- /*
- * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
-- * used to
-- * Used as platform_data to provide GPIO pin information to the ixp42x
-+ * used as platform_data to provide GPIO pin information to the ixp42x
- * I2C driver.
- */
- struct ixp4xx_i2c_pins {
-@@ -86,6 +85,27 @@ struct ixp4xx_i2c_pins {
- unsigned long scl_pin;
- };
+ struct sys_timer;
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+};
+
/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
-diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h
-new file mode 100644
-index 0000000..1e52b95
---- /dev/null
-+++ b/include/asm-arm/arch-ixp4xx/qmgr.h
-@@ -0,0 +1,126 @@
-+/*
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#ifndef IXP4XX_QMGR_H
-+#define IXP4XX_QMGR_H
-+
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+
-+#define HALF_QUEUES 32
-+#define QUEUES 64 /* only 32 lower queues currently supported */
-+#define MAX_QUEUE_LENGTH 4 /* in dwords */
-+
-+#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
-+#define QUEUE_STAT1_NEARLY_EMPTY 2
-+#define QUEUE_STAT1_NEARLY_FULL 4
-+#define QUEUE_STAT1_FULL 8
-+#define QUEUE_STAT2_UNDERFLOW 1
-+#define QUEUE_STAT2_OVERFLOW 2
-+
-+#define QUEUE_WATERMARK_0_ENTRIES 0
-+#define QUEUE_WATERMARK_1_ENTRY 1
-+#define QUEUE_WATERMARK_2_ENTRIES 2
-+#define QUEUE_WATERMARK_4_ENTRIES 3
-+#define QUEUE_WATERMARK_8_ENTRIES 4
-+#define QUEUE_WATERMARK_16_ENTRIES 5
-+#define QUEUE_WATERMARK_32_ENTRIES 6
-+#define QUEUE_WATERMARK_64_ENTRIES 7
-+
-+/* queue interrupt request conditions */
-+#define QUEUE_IRQ_SRC_EMPTY 0
-+#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
-+#define QUEUE_IRQ_SRC_NEARLY_FULL 2
-+#define QUEUE_IRQ_SRC_FULL 3
-+#define QUEUE_IRQ_SRC_NOT_EMPTY 4
-+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
-+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
-+#define QUEUE_IRQ_SRC_NOT_FULL 7
-+
-+struct qmgr_regs {
-+ u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
-+ u32 stat1[4]; /* 0x400 - 0x40F */
-+ u32 stat2[2]; /* 0x410 - 0x417 */
-+ u32 statne_h; /* 0x418 - queue nearly empty */
-+ u32 statf_h; /* 0x41C - queue full */
-+ u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
-+ u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
-+ u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
-+ u32 reserved[1776];
-+ u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
+ * Frequency of clock used for primary clocksource
+ */
+--
+1.5.2.5
+
+From 5a5be39c6411f2d6d8cead614f3f71af9fa4b4b4 Mon Sep 17 00:00:00 2001
+From: Krzysztof Halasa <khc@pm.waw.pl>
+Date: Fri, 1 Feb 2008 11:37:47 +1030
+Subject: Ethernet support for IXDP425 boards (Patch #4715)
+
+Adds IXDP425 platform support for two built-in 10/100 Ethernet ports.
+
+This patch will do nothing until the actual Ethernet driver is
+also included.
+
+Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
+--
+PATCH FOLLOWS
+KernelVersion: 2.6.23
+
+diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
+index e89070d..44584af 100644
+--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
+@@ -177,6 +177,31 @@ static struct platform_device ixdp425_uart = {
+ .resource = ixdp425_uart_resources
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ixdp425_plat_eth[] = {
++ {
++ .phy = 0,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 1,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
+};
+
-+void qmgr_set_irq(unsigned int queue, int src,
-+ void (*handler)(void *pdev), void *pdev);
-+void qmgr_enable_irq(unsigned int queue);
-+void qmgr_disable_irq(unsigned int queue);
-+
-+/* request_ and release_queue() must be called from non-IRQ context */
-+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-+ unsigned int nearly_empty_watermark,
-+ unsigned int nearly_full_watermark);
-+void qmgr_release_queue(unsigned int queue);
-+
-+
-+static inline void qmgr_put_entry(unsigned int queue, u32 val)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ __raw_writel(val, &qmgr_regs->acc[queue][0]);
-+}
-+
-+static inline u32 qmgr_get_entry(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return __raw_readl(&qmgr_regs->acc[queue][0]);
-+}
-+
-+static inline int qmgr_get_stat1(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
-+ >> ((queue & 7) << 2)) & 0xF;
-+}
-+
-+static inline int qmgr_get_stat2(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
-+ >> ((queue & 0xF) << 1)) & 0x3;
-+}
-+
-+static inline int qmgr_stat_empty(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
-+}
-+
-+static inline int qmgr_stat_nearly_empty(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
-+}
-+
-+static inline int qmgr_stat_nearly_full(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
-+}
-+
-+static inline int qmgr_stat_full(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
-+}
-+
-+static inline int qmgr_stat_underflow(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
-+}
-+
-+static inline int qmgr_stat_overflow(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
-+}
++static struct platform_device ixdp425_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = ixdp425_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = ixdp425_plat_eth + 1,
++ }
++};
+
-+#endif
-diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
-index f7a35b7..34ef48f 100644
---- a/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ b/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -13,7 +13,7 @@
- #ifndef _ARCH_UNCOMPRESS_H_
- #define _ARCH_UNCOMPRESS_H_
-
--#include <asm/hardware.h>
-+#include "ixp4xx-regs.h"
- #include <asm/mach-types.h>
- #include <linux/serial_reg.h>
+ static struct platform_device *ixdp425_devices[] __initdata = {
+ &ixdp425_i2c_gpio,
+ &ixdp425_flash,
+@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_devices[] __initdata = {
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ &ixdp425_flash_nand,
+ #endif
+- &ixdp425_uart
++ &ixdp425_uart,
++ &ixdp425_eth[0],
++ &ixdp425_eth[1],
+ };
+ static void __init ixdp425_init(void)
+--
+1.5.2.5
+
projects / openwrt.git / commitdiff