--- /dev/null
+/*
+ * TP-LINK TL-WR703N board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ar9xxx-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+
+#define TL_WR703N_GPIO_LED_SYSTEM 27
+#define TL_WR703N_GPIO_BTN_RESET 11
+
+#define TL_WR703N_GPIO_USB_POWER 8
+
+#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL)
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr703n_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2d0000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3d0000,
+ }
+};
+#define tl_wr703n_nr_parts ARRAY_SIZE(tl_wr703n_parts)
+#else
+#define tl_wr703n_parts NULL
+#define tl_wr703n_nr_parts 0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr703n_flash_data = {
+ .parts = tl_wr703n_parts,
+ .nr_parts = tl_wr703n_nr_parts,
+};
+
+static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wr703n:blue:system",
+ .gpio = TL_WR703N_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR703N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr703n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_add_device_m25p80(&tl_wr703n_flash_data);
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
+ tl_wr703n_leds_gpio);
+ ar71xx_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr703n_gpio_keys),
+ tl_wr703n_gpio_keys);
+
+ gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1);
+ ar71xx_add_device_usb();
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.phy_mask = BIT(4);
+
+ ar71xx_add_device_mdio(0x0);
+ ar71xx_add_device_eth(0);
+
+ ar9xxx_add_device_wmac(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
+ tl_wr703n_setup);
projects / openwrt.git / commitdiff