[ar71xx] add some missing wndr3800 base-files definitions

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
new file mode 100644 (file)
index 0000000..69d7dc7
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network
@@ -0,0 +1,69 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0.1
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
+
+config interface wan
+       option ifname   eth1
+       option proto    dhcp
+
+config switch
+       option name     rtl8366s
+       option reset    1
+       option enable_vlan 1
+       # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+       option blinkrate        2
+
+config switch_vlan
+       option device   rtl8366s
+       option vlan     1
+       option ports    "0 1 2 3 5t"
+
+config switch_port
+       # Port 1 controls the GREEN configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+       # 14: Link (master); 15: separate register
+
+       option device           rtl8366s
+       option port             1
+       option led              6
+
+config switch_port
+       # Port 2 controls the ORANGE configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       
+       option device           rtl8366s
+       option port             2
+       option led              9
+
+config switch_port
+       # Port 5 controls the configuration of the WAN LED and the
+       # section does not correspond to a real switch port.
+       #
+       # To toggle the use of green or orange LEDs for the WAN port,
+       # see the LED setting for wndr3700:green:wan in /etc/config/system.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+
+       option device           rtl8366s
+       option port             5
+       option led              2

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index dd5b6b1..cb3b851 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -111,7 +111,7 @@ get_status_led() {
        wzr-hp-g300nh)
                status_led="buffalo:green:router"
                ;;
-       wndr3700 | wndr3700v2)
+       wndr3700 | wndr3700v2 | wndr3800)
                status_led="wndr3700:green:power"
                ;;
        wnr2000)

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
index 8f72bba..0a72422 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds
@@ -124,7 +124,8 @@ wrt160nl)
        ;;
 
 wndr3700 | \
-wndr3700v2)
+wndr3700v2 | \
+wndr3800)
        set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
        set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
        ;;