+++ /dev/null
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH79 is not set
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRAMFS=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY_USER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MACH_NO_WESTBRIDGE=y
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM963XX=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RELAY=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-# CONFIG_SPI_BCM63XX is not set
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XZ_DEC=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -260,8 +260,10 @@ static unsigned int detect_memory_size(v
- unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- u32 val;
-
-- if (BCMCPU_IS_6345())
-- return (8 * 1024 * 1024);
-+ if (BCMCPU_IS_6345()) {
-+ val = bcm_sdram_readl(SDRAM_MBASE_REG);
-+ return (val * 8 * 1024 * 1024);
-+ }
-
- if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
- val = bcm_sdram_readl(SDRAM_CFG_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -735,6 +735,8 @@
- #define SDRAM_CFG_BANK_SHIFT 13
- #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT)
-
-+#define SDRAM_MBASE_REG 0xc
-+
- #define SDRAM_PRIO_REG 0x2C
- #define SDRAM_PRIO_MIPS_SHIFT 29
- #define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT)
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -698,15 +698,9 @@ void __init board_prom_init(void)
- char cfe_version[32];
- u32 val;
-
-- /* read base address of boot chip select (0)
-- * 6345 does not have MPI but boots from standard
-- * MIPS Flash address */
-- if (BCMCPU_IS_6345())
-- val = 0x1fc00000;
-- else {
-- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-- val &= MPI_CSBASE_BASE_MASK;
-- }
-+ /* read base address of boot chip select (0) */
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
- boot_addr = (u8 *)KSEG1ADDR(val);
-
- /* dump cfe version */
-@@ -881,12 +875,9 @@ int __init board_register_devices(void)
- bcm63xx_dsp_register(&board.dsp);
-
- /* read base address of boot chip select (0) */
-- if (BCMCPU_IS_6345())
-- val = 0x1fc00000;
-- else {
-- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-- val &= MPI_CSBASE_BASE_MASK;
-- }
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -163,7 +163,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_ENET0_BASE (0xfffe1800)
- #define BCM_6345_ENETDMA_BASE (0xfffe2800)
- #define BCM_6345_PCMCIA_BASE (0xfffe2028)
--#define BCM_6345_MPI_BASE (0xdeadbeef)
-+#define BCM_6345_MPI_BASE (0xfffe2000)
- #define BCM_6345_OHCI0_BASE (0xfffe2100)
- #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200)
- #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef)
---- a/arch/mips/bcm63xx/gpio.c
-+++ b/arch/mips/bcm63xx/gpio.c
-@@ -4,7 +4,7 @@
- * for more details.
- *
- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
- */
-
- #include <linux/kernel.h>
-@@ -33,7 +33,10 @@ static void bcm63xx_gpio_set(struct gpio
- BUG();
-
- if (gpio < 32) {
-- reg = GPIO_DATA_LO_REG;
-+ if (!BCMCPU_IS_6345())
-+ reg = GPIO_DATA_LO_REG;
-+ else
-+ reg = GPIO_DATA_HI_REG;
- mask = 1 << gpio;
- v = &gpio_out_low;
- } else {
-@@ -60,7 +63,10 @@ static int bcm63xx_gpio_get(struct gpio_
- BUG();
-
- if (gpio < 32) {
-- reg = GPIO_DATA_LO_REG;
-+ if (!BCMCPU_IS_6345())
-+ reg = GPIO_DATA_LO_REG;
-+ else
-+ reg = GPIO_DATA_HI_REG;
- mask = 1 << gpio;
- } else {
- reg = GPIO_DATA_HI_REG;
-@@ -125,7 +131,11 @@ static struct gpio_chip bcm63xx_gpio_chi
-
- int __init bcm63xx_gpio_init(void)
- {
-- gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+ if (!BCMCPU_IS_6345())
-+ gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
-+ else
-+ gpio_out_low = bcm_gpio_readl(GPIO_DATA_HI_REG);
-+
- gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
- bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
- pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
+++ /dev/null
-The bcm63xx SOC has an integrated OHCI controller, this patch adds
-platform device registration and change board code to register ohci
-device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/Kconfig | 6 ++
- arch/mips/bcm63xx/Makefile | 3 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++
- arch/mips/bcm63xx/dev-usb-ohci.c | 49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++
- 5 files changed, 67 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345
- config BCM63XX_CPU_6348
- bool "support 6348 CPU"
- select HW_HAS_PCI
-+ select USB_ARCH_HAS_OHCI
-+ select USB_OHCI_BIG_ENDIAN_DESC
-+ select USB_OHCI_BIG_ENDIAN_MMIO
-
- config BCM63XX_CPU_6358
- bool "support 6358 CPU"
- select HW_HAS_PCI
-+ select USB_ARCH_HAS_OHCI
-+ select USB_OHCI_BIG_ENDIAN_DESC
-+ select USB_OHCI_BIG_ENDIAN_MMIO
- endmenu
-
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,5 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
-+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-+ dev-usb-ohci.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <board_bcm963xx.h>
-
- #define PFX "board_bcm963xx: "
-@@ -871,6 +872,9 @@ int __init board_register_devices(void)
- !board_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
-+ if (board.has_ohci0)
-+ bcm63xx_ohci_register();
-+
- if (board.has_dsp)
- bcm63xx_dsp_register(&board.dsp);
-
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+ {
-+ /* start & end filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ /* start filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ohci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+ .name = "bcm63xx_ohci",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(ohci_resources),
-+ .resource = ohci_resources,
-+ .dev = {
-+ .dma_mask = &ohci_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
-+ return 0;
-+
-+ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+ ohci_resources[0].end = ohci_resources[0].start;
-+ ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+ return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
+++ /dev/null
-The bcm63xx SOC has an integrated EHCI controller, this patch adds
-platform device registration and change board code to register
-EHCI device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- arch/mips/bcm63xx/Kconfig | 2 +
- arch/mips/bcm63xx/Makefile | 2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++
- arch/mips/bcm63xx/dev-usb-ehci.c | 49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++
- 5 files changed, 62 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358
- select USB_ARCH_HAS_OHCI
- select USB_OHCI_BIG_ENDIAN_DESC
- select USB_OHCI_BIG_ENDIAN_MMIO
-+ select USB_ARCH_HAS_EHCI
-+ select USB_EHCI_BIG_ENDIAN_MMIO
- endmenu
-
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-- dev-usb-ohci.o
-+ dev-usb-ohci.o dev-usb-ehci.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <board_bcm963xx.h>
-
- #define PFX "board_bcm963xx: "
-@@ -872,6 +873,9 @@ int __init board_register_devices(void)
- !board_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
-+ if (board.has_ehci0)
-+ bcm63xx_ehci_register();
-+
- if (board.has_ohci0)
- bcm63xx_ohci_register();
-
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+ {
-+ /* start & end filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ /* start filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+ .name = "bcm63xx_ehci",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(ehci_resources),
-+ .resource = ehci_resources,
-+ .dev = {
-+ .dma_mask = &ehci_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+ if (!BCMCPU_IS_6358())
-+ return 0;
-+
-+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+ ehci_resources[0].end = ehci_resources[0].start;
-+ ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+ return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
+++ /dev/null
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- drivers/usb/host/ohci-bcm63xx.c | 166 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-hcd.c | 5 +
- drivers/usb/host/ohci.h | 2 +-
- 3 files changed, 172 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-bcm63xx.c
-
---- /dev/null
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -0,0 +1,166 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct clk *usb_host_clock;
-+
-+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int ret;
-+
-+ /*
-+ * port 2 can be shared with USB slave, but all boards seem to
-+ * have only one host port populated, so we can hardcode it
-+ */
-+ ohci->num_ports = 1;
-+
-+ ret = ohci_init(ohci);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = ohci_run(ohci);
-+ if (ret < 0) {
-+ err("can't start %s", hcd->self.bus_name);
-+ ohci_stop(hcd);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static const struct hc_driver ohci_bcm63xx_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "BCM63XX integrated OHCI controller",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_USB11 | HCD_MEMORY,
-+ .start = ohci_bcm63xx_start,
-+ .stop = ohci_stop,
-+ .shutdown = ohci_shutdown,
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+ .get_frame_number = ohci_get_frame,
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+ struct resource *res_mem;
-+ struct usb_hcd *hcd;
-+ struct ohci_hcd *ohci;
-+ u32 reg;
-+ int ret, irq;
-+
-+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);
-+ if (!res_mem || irq < 0)
-+ return -ENODEV;
-+
-+ if (BCMCPU_IS_6348()) {
-+ struct clk *clk;
-+ /* enable USB host clock */
-+ clk = clk_get(&pdev->dev, "usbh");
-+ if (IS_ERR(clk))
-+ return -ENODEV;
-+
-+ clk_enable(clk);
-+ usb_host_clock = clk;
-+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+
-+ } else if (BCMCPU_IS_6358()) {
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+ /*
-+ * The magic value comes for the original vendor BSP
-+ * and is needed for USB to work. Datasheet does not
-+ * help, so the magic value is used as-is.
-+ */
-+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+ } else
-+ return 0;
-+
-+ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+ if (!hcd)
-+ return -ENOMEM;
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+ pr_debug("request_mem_region failed\n");
-+ ret = -EBUSY;
-+ goto out;
-+ }
-+
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ pr_debug("ioremap failed\n");
-+ ret = -EIO;
-+ goto out1;
-+ }
-+
-+ ohci = hcd_to_ohci(hcd);
-+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
-+ OHCI_QUIRK_FRAME_NO;
-+ ohci_hcd_init(ohci);
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+ if (ret)
-+ goto out2;
-+
-+ platform_set_drvdata(pdev, hcd);
-+ return 0;
-+
-+out2:
-+ iounmap(hcd->regs);
-+out1:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+ usb_put_hcd(hcd);
-+ return ret;
-+}
-+
-+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(pdev);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ usb_put_hcd(hcd);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ if (usb_host_clock) {
-+ clk_disable(usb_host_clock);
-+ clk_put(usb_host_clock);
-+ }
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ohci_hcd_bcm63xx_driver = {
-+ .probe = ohci_hcd_bcm63xx_drv_probe,
-+ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .driver = {
-+ .name = "bcm63xx_ohci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ohci");
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1056,6 +1056,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_hcd_da8xx_driver
- #endif
-
-+#ifdef CONFIG_BCM63XX
-+#include "ohci-bcm63xx.c"
-+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver
-+#endif
-+
- #ifdef CONFIG_USB_OHCI_SH
- #include "ohci-sh.c"
- #define PLATFORM_DRIVER ohci_hcd_sh_driver
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -646,7 +646,7 @@ static inline u32 hc32_to_cpup (const st
- * some big-endian SOC implementations. Same thing happens with PSW access.
- */
-
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
- #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci) 0
+++ /dev/null
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
----
- drivers/usb/host/ehci-bcm63xx.c | 154 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c | 5 +
- 2 files changed, 159 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-bcm63xx.c
-
---- /dev/null
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int retval;
-+
-+ retval = ehci_halt(ehci);
-+ if (retval)
-+ return retval;
-+
-+ retval = ehci_init(hcd);
-+ if (retval)
-+ return retval;
-+
-+ ehci_reset(ehci);
-+ ehci_port_power(ehci, 0);
-+
-+ return retval;
-+}
-+
-+
-+static const struct hc_driver ehci_bcm63xx_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "BCM63XX integrated EHCI controller",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ehci_bcm63xx_setup,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+};
-+
-+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+ struct resource *res_mem;
-+ struct usb_hcd *hcd;
-+ struct ehci_hcd *ehci;
-+ u32 reg;
-+ int ret, irq;
-+
-+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);;
-+ if (!res_mem || irq < 0)
-+ return -ENODEV;
-+
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+
-+ /*
-+ * The magic value comes for the original vendor BSP and is
-+ * needed for USB to work. Datasheet does not help, so the
-+ * magic value is used as-is.
-+ */
-+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+
-+ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+ if (!hcd)
-+ return -ENOMEM;
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+ pr_debug("request_mem_region failed\n");
-+ ret = -EBUSY;
-+ goto out;
-+ }
-+
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ pr_debug("ioremap failed\n");
-+ ret = -EIO;
-+ goto out1;
-+ }
-+
-+ ehci = hcd_to_ehci(hcd);
-+ ehci->big_endian_mmio = 1;
-+ ehci->big_endian_desc = 0;
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs +
-+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+ ehci->sbrn = 0x20;
-+ ehci->ignore_oc = 1;
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+ if (ret)
-+ goto out2;
-+
-+ platform_set_drvdata(pdev, hcd);
-+ return 0;
-+
-+out2:
-+ iounmap(hcd->regs);
-+out1:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+ usb_put_hcd(hcd);
-+ return ret;
-+}
-+
-+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(pdev);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ usb_put_hcd(hcd);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ehci_hcd_bcm63xx_driver = {
-+ .probe = ehci_hcd_bcm63xx_drv_probe,
-+ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .driver = {
-+ .name = "bcm63xx_ehci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ehci");
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1267,6 +1267,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER tegra_ehci_driver
- #endif
-
-+#ifdef CONFIG_BCM63XX
-+#include "ehci-bcm63xx.c"
-+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
+++ /dev/null
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c | 32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c | 13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -810,20 +810,6 @@ void __init board_setup(void)
- panic("unexpected CPU for bcm963xx board");
- }
-
--static struct mtd_partition mtd_partitions[] = {
-- {
-- .name = "cfe",
-- .offset = 0x0,
-- .size = 0x40000,
-- }
--};
--
--static struct physmap_flash_data flash_data = {
-- .width = 2,
-- .nr_parts = ARRAY_SIZE(mtd_partitions),
-- .parts = mtd_partitions,
--};
--
- static struct resource mtd_resources[] = {
- {
- .start = 0, /* filled at runtime */
-@@ -833,12 +819,9 @@ static struct resource mtd_resources[] =
- };
-
- static struct platform_device mtd_dev = {
-- .name = "physmap-flash",
-+ .name = "bcm963xx-flash",
- .resource = mtd_resources,
- .num_resources = ARRAY_SIZE(mtd_resources),
-- .dev = {
-- .platform_data = &flash_data,
-- },
- };
-
- static struct gpio_led_platform_data bcm63xx_led_data;
---- a/drivers/mtd/maps/bcm963xx-flash.c
-+++ b/drivers/mtd/maps/bcm963xx-flash.c
-@@ -27,6 +27,8 @@
- #include <linux/vmalloc.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
-+#include <linux/magic.h>
-+#include <linux/jffs2.h>
-
- #include <asm/mach-bcm63xx/bcm963xx_tag.h>
-
-@@ -35,6 +37,14 @@
-
- #define PFX KBUILD_MODNAME ": "
-
-+struct squashfs_super_block {
-+ __le32 s_magic;
-+ __le32 pad0[9];
-+ __le64 bytes_used;
-+};
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
-+
- static struct mtd_partition *parsed_parts;
-
- static struct mtd_info *bcm963xx_mtd_info;
-@@ -219,9 +229,21 @@ probe_ok:
- }
- }
- } else {
-- dev_info(&pdev->dev, "unsupported bootloader\n");
-- err = -ENODEV;
-- goto err_probe;
-+ printk(KERN_INFO PFX "assuming RedBoot bootloader\n");
-+ if (bcm963xx_mtd_info->size > 0x00400000) {
-+ printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
-+ bcm963xx_map.virt = (u32)(BCM63XX_EXTENDED_SIZE);
-+ }
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ if (parsed_nr_parts == 0) {
-+ int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
-+ if (ret > 0) {
-+ part_type = "RedBoot";
-+ parsed_nr_parts = ret;
-+ }
-+ }
-+#endif
- }
-
- return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -57,7 +57,7 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
--static int parse_redboot_partitions(struct mtd_info *master,
-+int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
- {
-@@ -180,6 +180,14 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-+ if (!fis_origin) {
-+ for (i = 0; i < numslots; i++) {
-+ if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+ }
-+ }
-+ }
-+
- for (i = 0; i < numslots; i++) {
- struct fis_list *new_fl, **prev;
-
-@@ -202,9 +210,8 @@ static int parse_redboot_partitions(stru
- new_fl->img = &buf[i];
- if (fis_origin) {
- buf[i].flash_base -= fis_origin;
-- } else {
-- buf[i].flash_base &= master->size-1;
- }
-+ buf[i].flash_base &= (master->size << 1) - 1;
-
- /* I'm sure the JFFS2 code has done me permanent damage.
- * I now think the following is _normal_
+++ /dev/null
---- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
-@@ -86,8 +86,10 @@ struct bcm_tag {
- char rootfs_crc[CRC_LEN];
- /* 224-227: CRC32 of kernel partition */
- char kernel_crc[CRC_LEN];
-- /* 228-235: Unused at present */
-- char reserved1[8];
-+ /* 228-231: Image sequence number */
-+ char image_sequence[4];
-+ /* 222-235: Openwrt: real rootfs length */
-+ char real_rootfs_length[4];
- /* 236-239: CRC32 of header excluding last 20 bytes */
- char header_crc[CRC_LEN];
- /* 240-255: Unused at present */
---- a/drivers/mtd/maps/bcm963xx-flash.c
-+++ b/drivers/mtd/maps/bcm963xx-flash.c
-@@ -64,7 +64,7 @@ static int parse_cfe_partitions(struct m
- int ret;
- size_t retlen;
- unsigned int rootfsaddr, kerneladdr, spareaddr;
-- unsigned int rootfslen, kernellen, sparelen, totallen;
-+ unsigned int rootfslen, kernellen, sparelen;
- int namelen = 0;
- int i;
- char *boardid;
-@@ -85,7 +85,7 @@ static int parse_cfe_partitions(struct m
-
- sscanf(buf->kernel_address, "%u", &kerneladdr);
- sscanf(buf->kernel_length, "%u", &kernellen);
-- sscanf(buf->total_length, "%u", &totallen);
-+ rootfslen = *(uint32_t *)(&(buf->real_rootfs_length));
- tagversion = &(buf->tag_version[0]);
- boardid = &(buf->board_id[0]);
-
-@@ -94,7 +94,8 @@ static int parse_cfe_partitions(struct m
-
- kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
- rootfsaddr = kerneladdr + kernellen;
-- spareaddr = roundup(totallen, master->erasesize) + master->erasesize;
-+ rootfslen = roundup(rootfslen, master->erasesize);
-+ spareaddr = rootfsaddr + rootfslen;
- sparelen = master->size - spareaddr - master->erasesize;
- rootfslen = spareaddr - rootfsaddr;
-
+++ /dev/null
---- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -1515,7 +1515,7 @@ static int compute_hw_mtu(struct bcm_ene
- actual_mtu = mtu;
-
- /* add ethernet header + vlan tag size */
-- actual_mtu += VLAN_ETH_HLEN;
-+ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-
- if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
- return -EINVAL;
+++ /dev/null
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -29,16 +29,15 @@
- CKCTL_6338_SAR_EN | \
- CKCTL_6338_SPI_EN)
-
--#define CKCTL_6345_CPU_EN (1 << 0)
--#define CKCTL_6345_BUS_EN (1 << 1)
--#define CKCTL_6345_EBI_EN (1 << 2)
--#define CKCTL_6345_UART_EN (1 << 3)
--#define CKCTL_6345_ADSLPHY_EN (1 << 4)
--#define CKCTL_6345_ENET_EN (1 << 7)
--#define CKCTL_6345_USBH_EN (1 << 8)
-+#define CKCTL_6345_CPU_EN (1 << 16)
-+#define CKCTL_6345_BUS_EN (1 << 17)
-+#define CKCTL_6345_EBI_EN (1 << 18)
-+#define CKCTL_6345_UART_EN (1 << 19)
-+#define CKCTL_6345_ADSLPHY_EN (1 << 20)
-+#define CKCTL_6345_ENET_EN (1 << 23)
-+#define CKCTL_6345_USBH_EN (1 << 24)
-
--#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \
-- CKCTL_6345_USBH_EN | \
-+#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_USBH_EN | \
- CKCTL_6345_ADSLPHY_EN)
-
- #define CKCTL_6348_ADSLPHY_EN (1 << 0)
-@@ -548,6 +547,39 @@
- #define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10)
-
-
-+/* Broadcom 6345 ENET DMA definitions */
-+#define ENETDMA_6345_CHANCFG_REG(x) (0x00 + (x) * 0x40)
-+#define ENETDMA_6345_CHANCFG_EN_SHIFT 0
-+#define ENETDMA_6345_CHANCFG_EN_MASK (1 << ENETDMA_6345_CHANCFG_EN_SHIFT)
-+#define ENETDMA_6345_PKTHALT_SHIFT 1
-+#define ENETDMA_6345_PKTHALT_MASK (1 << ENETDMA_6345_PKTHALT_SHIFT)
-+#define ENETDMA_6345_CHAINING_SHIFT 2
-+#define ENETDMA_6345_CHAINING_MASK (1 << ENETDMA_6345_CHAINING_SHIFT)
-+#define ENETDMA_6345_WRAP_EN_SHIFT 3
-+#define ENETDMA_6345_WRAP_EN_MASK (1 << ENETDMA_6345_WRAP_EN_SHIFT)
-+#define ENETDMA_6345_FLOWC_EN_SHIFT 4
-+#define ENETDMA_6345_FLOWC_EN_MASK (1 << ENETDMA_6345_FLOWC_EN_SHIFT)
-+
-+#define ENETDMA_6345_MAXBURST_REG(x) (0x04 + (x) * 0x40)
-+
-+#define ENETDMA_6345_RSTART_REG(x) (0x08 + (x) * 0x40)
-+
-+#define ENETDMA_6345_LEN_REG(x) (0x0C + (x) * 0x40)
-+
-+#define ENETDMA_6345_BSTAT_REG(x) (0x10 + (x) * 0x40)
-+
-+#define ENETDMA_6345_IR_REG(x) (0x14 + (x) * 0x40)
-+#define ENETDMA_6345_IR_BUFDONE_MASK (1 << 0)
-+#define ENETDMA_6345_IR_PKTDONE_MASK (1 << 1)
-+#define ENETDMA_6345_IR_NOTOWNER_MASK (1 << 2)
-+
-+#define ENETDMA_6345_IRMASK_REG(x) (0x18 + (x) * 0x40)
-+
-+#define ENETDMA_6345_FC_REG(x) (0x1C + (x) * 0x40)
-+
-+#define ENETDMA_6345_BUFALLOC_REG(x) (0x20 + (x) * 0x40)
-+
-+
- /*************************************************************************
- * _REG relative to RSET_OHCI_PRIV
- *************************************************************************/
---- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -31,6 +31,7 @@
- #include <linux/if_vlan.h>
-
- #include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_cpu.h>
- #include "bcm63xx_enet.h"
-
- static char bcm_enet_driver_name[] = "bcm63xx_enet";
-@@ -177,6 +178,7 @@ static void bcm_enet_mdio_write_mii(stru
- static int bcm_enet_refill_rx(struct net_device *dev)
- {
- struct bcm_enet_priv *priv;
-+ unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
-
- priv = netdev_priv(dev);
-
-@@ -205,7 +207,7 @@ static int bcm_enet_refill_rx(struct net
- len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
- len_stat |= DMADESC_OWNER_MASK;
- if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
-- len_stat |= DMADESC_WRAP_MASK;
-+ len_stat |= (DMADESC_WRAP_MASK >> desc_shift);
- priv->rx_dirty_desc = 0;
- } else {
- priv->rx_dirty_desc++;
-@@ -216,7 +218,10 @@ static int bcm_enet_refill_rx(struct net
- priv->rx_desc_count++;
-
- /* tell dma engine we allocated one buffer */
-- enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ if (!BCMCPU_IS_6345())
-+ enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ else
-+ enet_dma_writel(priv, 1, ENETDMA_6345_BUFALLOC_REG(priv->rx_chan));
- }
-
- /* If rx ring is still empty, set a timer to try allocating
-@@ -254,6 +259,7 @@ static int bcm_enet_receive_queue(struct
- struct bcm_enet_priv *priv;
- struct device *kdev;
- int processed;
-+ unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
-
- priv = netdev_priv(dev);
- kdev = &priv->pdev->dev;
-@@ -292,7 +298,7 @@ static int bcm_enet_receive_queue(struct
-
- /* if the packet does not have start of packet _and_
- * end of packet flag set, then just recycle it */
-- if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
-+ if ((len_stat & (DMADESC_ESOP_MASK >> desc_shift)) != (DMADESC_ESOP_MASK >> desc_shift)) {
- dev->stats.rx_dropped++;
- continue;
- }
-@@ -352,8 +358,15 @@ static int bcm_enet_receive_queue(struct
- bcm_enet_refill_rx(dev);
-
- /* kick rx dma */
-- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-- ENETDMA_CHANCFG_REG(priv->rx_chan));
-+ if (!BCMCPU_IS_6345())
-+ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-+ ENETDMA_CHANCFG_REG(priv->rx_chan));
-+ else
-+ enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
-+ ENETDMA_6345_CHAINING_MASK |
-+ ENETDMA_6345_WRAP_EN_MASK |
-+ ENETDMA_6345_FLOWC_EN_MASK,
-+ ENETDMA_6345_CHANCFG_REG(priv->rx_chan));
- }
-
- return processed;
-@@ -428,10 +441,21 @@ static int bcm_enet_poll(struct napi_str
- dev = priv->net_dev;
-
- /* ack interrupts */
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IR_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IR_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IR_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IR_REG(priv->tx_chan));
-+ }
-
- /* reclaim sent skb */
- tx_work_done = bcm_enet_tx_reclaim(dev, 0);
-@@ -450,10 +474,21 @@ static int bcm_enet_poll(struct napi_str
- napi_complete(napi);
-
- /* restore rx/tx interrupt */
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IRMASK_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+ }
-
- return rx_work_done;
- }
-@@ -496,8 +531,13 @@ static irqreturn_t bcm_enet_isr_dma(int
- priv = netdev_priv(dev);
-
- /* mask rx/tx interrupts */
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+ }
-
- napi_schedule(&priv->napi);
-
-@@ -513,6 +553,7 @@ static int bcm_enet_start_xmit(struct sk
- struct bcm_enet_desc *desc;
- u32 len_stat;
- int ret;
-+ unsigned int desc_shift = BCMCPU_IS_6345() ? DMADESC_6345_SHIFT : 0;
-
- priv = netdev_priv(dev);
-
-@@ -538,14 +579,13 @@ static int bcm_enet_start_xmit(struct sk
- DMA_TO_DEVICE);
-
- len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
-- len_stat |= DMADESC_ESOP_MASK |
-- DMADESC_APPEND_CRC |
-- DMADESC_OWNER_MASK;
-+ len_stat |= ((DMADESC_ESOP_MASK >> desc_shift) |
-+ DMADESC_APPEND_CRC | DMADESC_OWNER_MASK);
-
- priv->tx_curr_desc++;
- if (priv->tx_curr_desc == priv->tx_ring_size) {
- priv->tx_curr_desc = 0;
-- len_stat |= DMADESC_WRAP_MASK;
-+ len_stat |= (DMADESC_WRAP_MASK >> desc_shift);
- }
- priv->tx_desc_count--;
-
-@@ -556,8 +596,15 @@ static int bcm_enet_start_xmit(struct sk
- wmb();
-
- /* kick tx dma */
-- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-- ENETDMA_CHANCFG_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345())
-+ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-+ ENETDMA_CHANCFG_REG(priv->tx_chan));
-+ else
-+ enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
-+ ENETDMA_6345_CHAINING_MASK |
-+ ENETDMA_6345_WRAP_EN_MASK |
-+ ENETDMA_6345_FLOWC_EN_MASK,
-+ ENETDMA_6345_CHANCFG_REG(priv->tx_chan));
-
- /* stop queue if no more desc available */
- if (!priv->tx_desc_count)
-@@ -685,6 +732,9 @@ static void bcm_enet_set_flow(struct bcm
- val &= ~ENET_RXCFG_ENFLOW_MASK;
- enet_writel(priv, val, ENET_RXCFG_REG);
-
-+ if (BCMCPU_IS_6345())
-+ return;
-+
- /* tx flow control (pause frame generation) */
- val = enet_dma_readl(priv, ENETDMA_CFG_REG);
- if (tx_en)
-@@ -832,8 +882,13 @@ static int bcm_enet_open(struct net_devi
-
- /* mask all interrupts and request them */
- enet_writel(priv, 0, ENET_IRMASK_REG);
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+ }
-
- ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- if (ret)
-@@ -912,8 +967,12 @@ static int bcm_enet_open(struct net_devi
- priv->rx_curr_desc = 0;
-
- /* initialize flow control buffer allocation */
-- enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-- ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ if (!BCMCPU_IS_6345())
-+ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+ ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ else
-+ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+ ENETDMA_6345_BUFALLOC_REG(priv->rx_chan));
-
- if (bcm_enet_refill_rx(dev)) {
- dev_err(kdev, "cannot allocate rx skb queue\n");
-@@ -922,37 +981,62 @@ static int bcm_enet_open(struct net_devi
- }
-
- /* write rx & tx ring addresses */
-- enet_dma_writel(priv, priv->rx_desc_dma,
-- ENETDMA_RSTART_REG(priv->rx_chan));
-- enet_dma_writel(priv, priv->tx_desc_dma,
-- ENETDMA_RSTART_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, priv->rx_desc_dma,
-+ ENETDMA_RSTART_REG(priv->rx_chan));
-+ enet_dma_writel(priv, priv->tx_desc_dma,
-+ ENETDMA_RSTART_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, priv->rx_desc_dma,
-+ ENETDMA_6345_RSTART_REG(priv->rx_chan));
-+ enet_dma_writel(priv, priv->tx_desc_dma,
-+ ENETDMA_6345_RSTART_REG(priv->tx_chan));
-+ }
-
- /* clear remaining state ram for rx & tx channel */
-- enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_6345_FC_REG(priv->tx_chan));
-+ }
-
- /* set max rx/tx length */
- enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
- enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
-
- /* set dma maximum burst len */
-- enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-- ENETDMA_MAXBURST_REG(priv->rx_chan));
-- enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-- ENETDMA_MAXBURST_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMA_MAXBURST_REG(priv->rx_chan));
-+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMA_MAXBURST_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMA_6345_MAXBURST_REG(priv->rx_chan));
-+ enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMA_6345_MAXBURST_REG(priv->tx_chan));
-+ }
-
- /* set correct transmit fifo watermark */
- enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
-
- /* set flow control low/high threshold to 1/3 / 2/3 */
-- val = priv->rx_ring_size / 3;
-- enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-- val = (priv->rx_ring_size * 2) / 3;
-- enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ val = priv->rx_ring_size / 3;
-+ enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-+ val = (priv->rx_ring_size * 2) / 3;
-+ enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+ } else {
-+ enet_dma_writel(priv, 5, ENETDMA_6345_FC_REG(priv->rx_chan));
-+ enet_dma_writel(priv, priv->rx_ring_size, ENETDMA_6345_LEN_REG(priv->rx_chan));
-+ enet_dma_writel(priv, priv->tx_ring_size, ENETDMA_6345_LEN_REG(priv->tx_chan));
-+ }
-
- /* all set, enable mac and interrupts, start dma engine and
- * kick rx dma channel */
-@@ -960,27 +1044,58 @@ static int bcm_enet_open(struct net_devi
- val = enet_readl(priv, ENET_CTL_REG);
- val |= ENET_CTL_ENABLE_MASK;
- enet_writel(priv, val, ENET_CTL_REG);
-- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-- ENETDMA_CHANCFG_REG(priv->rx_chan));
-+
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-+ enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-+ ENETDMA_CHANCFG_REG(priv->rx_chan));
-+ } else {
-+ enet_dma_writel(priv, ENETDMA_6345_CHANCFG_EN_MASK |
-+ ENETDMA_6345_CHAINING_MASK |
-+ ENETDMA_6345_WRAP_EN_MASK |
-+ ENETDMA_6345_FLOWC_EN_MASK,
-+ ENETDMA_6345_CHANCFG_REG(priv->rx_chan));
-+ }
-
- /* watch "mib counters about to overflow" interrupt */
- enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
- enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
-
- /* watch "packet transferred" interrupt in rx and tx */
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IR_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IR_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IR_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IR_REG(priv->tx_chan));
-+ }
-
- /* make sure we enable napi before rx interrupt */
- napi_enable(&priv->napi);
-
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-+ ENETDMA_IRMASK_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, ENETDMA_IR_BUFDONE_MASK |
-+ ENETDMA_IR_PKTDONE_MASK |
-+ ENETDMA_IR_NOTOWNER_MASK,
-+ ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+ }
-
- if (priv->has_phy)
- phy_start(priv->phydev);
-@@ -1060,13 +1175,19 @@ static void bcm_enet_disable_dma(struct
- {
- int limit;
-
-- enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
-+ if (!BCMCPU_IS_6345())
-+ enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
-+ else
-+ enet_dma_writel(priv, 0, ENETDMA_6345_CHANCFG_REG(chan));
-
- limit = 1000;
- do {
- u32 val;
-
-- val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
-+ if (!BCMCPU_IS_6345())
-+ val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
-+ else
-+ val = enet_dma_readl(priv, ENETDMA_6345_CHANCFG_REG(chan));
- if (!(val & ENETDMA_CHANCFG_EN_MASK))
- break;
- udelay(1);
-@@ -1093,8 +1214,13 @@ static int bcm_enet_stop(struct net_devi
-
- /* mask all interrupts */
- enet_writel(priv, 0, ENET_IRMASK_REG);
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ if (!BCMCPU_IS_6345()) {
-+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ } else {
-+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->rx_chan));
-+ enet_dma_writel(priv, 0, ENETDMA_6345_IRMASK_REG(priv->tx_chan));
-+ }
-
- /* make sure no mib update is scheduled */
- cancel_work_sync(&priv->mib_update_task);
-@@ -1622,6 +1748,7 @@ static int __devinit bcm_enet_probe(stru
- const char *clk_name;
- unsigned int iomem_size;
- int i, ret;
-+ unsigned int chan_offset = 0;
-
- /* stop if shared driver failed, assume driver->probe will be
- * called in the same order we register devices (correct ?) */
-@@ -1661,10 +1788,13 @@ static int __devinit bcm_enet_probe(stru
- priv->irq_tx = res_irq_tx->start;
- priv->mac_id = pdev->id;
-
-+ if (BCMCPU_IS_6345())
-+ chan_offset = 1;
-+
- /* get rx & tx dma channel id for this mac */
- if (priv->mac_id == 0) {
-- priv->rx_chan = 0;
-- priv->tx_chan = 1;
-+ priv->rx_chan = 0 + chan_offset;
-+ priv->tx_chan = 1 + chan_offset;
- clk_name = "enet0";
- } else {
- priv->rx_chan = 2;
---- a/drivers/net/bcm63xx_enet.h
-+++ b/drivers/net/bcm63xx_enet.h
-@@ -46,6 +46,9 @@ struct bcm_enet_desc {
- #define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK)
- #define DMADESC_WRAP_MASK (1 << 12)
-
-+/* Shift down for EOP, SOP and WRAP bits */
-+#define DMADESC_6345_SHIFT (3)
-+
- #define DMADESC_UNDER_MASK (1 << 9)
- #define DMADESC_APPEND_CRC (1 << 8)
- #define DMADESC_OVSIZE_MASK (1 << 4)
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -104,7 +104,7 @@ int __init bcm63xx_enet_register(int uni
- if (unit > 1)
- return -ENODEV;
-
-- if (unit == 1 && BCMCPU_IS_6338())
-+ if (unit == 1 && (BCMCPU_IS_6338() || BCMCPU_IS_6345()))
- return -ENODEV;
-
- if (!shared_device_registered) {
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_buttons.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -296,6 +298,16 @@ static struct board_info __initdata boar
- .active_low = 1,
- },
- },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_96348gw = {
-@@ -354,6 +366,16 @@ static struct board_info __initdata boar
- .active_low = 1,
- },
- },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_FAST2404 = {
-@@ -832,12 +854,23 @@ static struct platform_device bcm63xx_gp
- .dev.platform_data = &bcm63xx_led_data,
- };
-
-+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
-+ .poll_interval = 20,
-+};
-+
-+static struct platform_device bcm63xx_gpio_buttons_device = {
-+ .name = "gpio-buttons",
-+ .id = 0,
-+ .dev.platform_data = &bcm63xx_gpio_buttons_data,
-+};
-+
- /*
- * third stage init callback, register all board devices.
- */
- int __init board_register_devices(void)
- {
- u32 val;
-+ int button_count = 0;
-
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-@@ -879,5 +912,16 @@ int __init board_register_devices(void)
-
- platform_device_register(&bcm63xx_gpio_leds);
-
-+ /* count number of BUTTONs defined by this device */
-+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+ button_count++;
-+
-+ if (button_count) {
-+ bcm63xx_gpio_buttons_data.nbuttons = button_count;
-+ bcm63xx_gpio_buttons_data.buttons = board.buttons;
-+
-+ platform_device_register(&bcm63xx_gpio_buttons_device);
-+ }
-+
- return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,6 +57,9 @@ struct board_info {
-
- /* GPIO LEDs */
- struct gpio_led leds[5];
-+
-+ /* Buttons */
-+ struct gpio_button buttons[2];
- };
-
- #endif /* ! BOARD_BCM963XX_H_ */
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -871,6 +871,7 @@ int __init board_register_devices(void)
- {
- u32 val;
- int button_count = 0;
-+ int led_count = 0;
-
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-@@ -907,7 +908,11 @@ int __init board_register_devices(void)
-
- platform_device_register(&mtd_dev);
-
-- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+ /* count number of LEDs defined by this device */
-+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+ led_count++;
-+
-+ bcm63xx_led_data.num_leds = led_count;
- bcm63xx_led_data.leds = board.leds;
-
- platform_device_register(&bcm63xx_gpio_leds);
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -29,6 +29,7 @@
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_udc.h>
- #include <board_bcm963xx.h>
-
- #define PFX "board_bcm963xx: "
-@@ -400,6 +401,8 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
-+
-+ .has_udc0 = 1,
- };
-
- static struct board_info __initdata board_rta1025w_16 = {
-@@ -899,6 +902,9 @@ int __init board_register_devices(void)
- if (board.has_dsp)
- bcm63xx_dsp_register(&board.dsp);
-
-+ if (board.has_udc0)
-+ bcm63xx_udc_register();
-+
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-udc.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+
-+static struct resource udc_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 udc_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_udc_device = {
-+ .name = "bcm63xx-udc",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(udc_resources),
-+ .resource = udc_resources,
-+ .dev = {
-+ .dma_mask = &udc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+int __init bcm63xx_udc_register(void)
-+{
-+ if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
-+ return 0;
-+
-+ udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
-+ udc_resources[0].end = udc_resources[0].start;
-+ udc_resources[0].end += RSET_UDC_SIZE - 1;
-+ udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
-+ return platform_device_register(&bcm63xx_udc_device);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -127,7 +127,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE (0xdeadbeef)
- #define BCM_6338_GPIO_BASE (0xfffe0400)
- #define BCM_6338_SPI_BASE (0xfffe0c00)
--#define BCM_6338_UDC0_BASE (0xdeadbeef)
-+#define BCM_6338_UDC0_BASE (0xfffe3000)
- #define BCM_6338_USBDMA_BASE (0xfffe2400)
- #define BCM_6338_OHCI0_BASE (0xdeadbeef)
- #define BCM_6338_OHCI_PRIV_BASE (0xfffe3000)
-@@ -158,7 +158,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE (0xdeadbeef)
- #define BCM_6345_GPIO_BASE (0xfffe0400)
- #define BCM_6345_SPI_BASE (0xdeadbeef)
--#define BCM_6345_UDC0_BASE (0xdeadbeef)
-+#define BCM_6345_UDC0_BASE (0xfffe2100)
- #define BCM_6345_USBDMA_BASE (0xfffe2800)
- #define BCM_6345_ENET0_BASE (0xfffe1800)
- #define BCM_6345_ENETDMA_BASE (0xfffe2800)
-@@ -215,7 +215,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE (0xfffe0120)
- #define BCM_6358_GPIO_BASE (0xfffe0080)
- #define BCM_6358_SPI_BASE (0xdeadbeef)
--#define BCM_6358_UDC0_BASE (0xfffe0800)
-+#define BCM_6358_UDC0_BASE (0xfffe0400)
- #define BCM_6358_OHCI0_BASE (0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
- #define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
-@@ -444,6 +444,7 @@ enum bcm63xx_irq {
- IRQ_UART0,
- IRQ_UART1,
- IRQ_DSL,
-+ IRQ_UDC0,
- IRQ_ENET0,
- IRQ_ENET1,
- IRQ_ENET_PHY,
-@@ -486,7 +487,7 @@ enum bcm63xx_irq {
- #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3)
- #define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4)
--#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5)
- #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
- #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1)
-@@ -508,10 +509,17 @@ enum bcm63xx_irq {
- #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
- #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6)
- #define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
- #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14)
-+#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16)
-+#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17)
-+#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18)
-+#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19)
- #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
- #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21)
- #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22)
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_UDC_H_
-+#define BCM63XX_DEV_USB_UDC_H_
-+
-+int bcm63xx_udc_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_UDC_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -47,6 +47,7 @@ struct board_info {
- unsigned int has_dsp:1;
- unsigned int has_uart0:1;
- unsigned int has_uart1:1;
-+ unsigned int has_udc0:1;
-
- /* ethernet config */
- struct bcm63xx_enet_platform_data enet0;
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-- dev-usb-ohci.o dev-usb-ehci.o
-+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
- };
-
- /*
-+ * USB slave clock
-+ */
-+static void usbs_set(struct clk *clk, int enable)
-+{
-+ u32 mask;
-+
-+ switch(bcm63xx_get_cpu_id()) {
-+ case BCM6338_CPU_ID:
-+ mask = CKCTL_6338_USBS_EN;
-+ break;
-+ case BCM6348_CPU_ID:
-+ mask = CKCTL_6348_USBS_EN;
-+ break;
-+ default:
-+ return;
-+ }
-+ bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_usbs = {
-+ .set = usbs_set,
-+};
-+
-+/*
- * SPI clock
- */
- static void spi_set(struct clk *clk, int enable)
-@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev,
- return &clk_ephy;
- if (!strcmp(id, "usbh"))
- return &clk_usbh;
-+ if (!strcmp(id, "usbs"))
-+ return &clk_usbs;
- if (!strcmp(id, "spi"))
- return &clk_spi;
- if (!strcmp(id, "periph"))
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
- select USB_ARCH_HAS_OHCI
- select USB_OHCI_BIG_ENDIAN_DESC
- select USB_OHCI_BIG_ENDIAN_MMIO
-+ select USB_ARCH_HAS_UDC
-
- config BCM63XX_CPU_6345
- bool "support 6345 CPU"
-@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
- select USB_ARCH_HAS_OHCI
- select USB_OHCI_BIG_ENDIAN_DESC
- select USB_OHCI_BIG_ENDIAN_MMIO
-+ select USB_ARCH_HAS_UDC
-
- config BCM63XX_CPU_6358
- bool "support 6358 CPU"
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -905,6 +905,9 @@ int __init board_register_devices(void)
- if (board.has_udc0)
- bcm63xx_udc_register();
-
-+ if (board.num_devs)
-+ platform_add_devices(board.devs, board.num_devs);
-+
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -61,6 +61,10 @@ struct board_info {
-
- /* Buttons */
- struct gpio_button buttons[2];
-+
-+ /* Additional platform devices */
-+ struct platform_device **devs;
-+ unsigned int num_devs;
- };
-
- #endif /* ! BOARD_BCM963XX_H_ */
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -908,6 +908,9 @@ int __init board_register_devices(void)
- if (board.num_devs)
- platform_add_devices(board.devs, board.num_devs);
-
-+ if (board.num_spis)
-+ spi_register_board_info(board.spis, board.num_spis);
-+
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -65,6 +65,10 @@ struct board_info {
- /* Additional platform devices */
- struct platform_device **devs;
- unsigned int num_devs;
-+
-+ /* Additional platform devices */
-+ struct spi_board_info *spis;
-+ unsigned int num_spis;
- };
-
- #endif /* ! BOARD_BCM963XX_H_ */
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -39,6 +39,13 @@ static unsigned int mac_addr_used;
- static struct board_info board;
-
- /*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
-+/*
- * known 6338 boards
- */
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -741,6 +748,7 @@ void __init board_prom_init(void)
-
- /* extract nvram data */
- memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-+ memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE);
-
- /* check checksum before using data */
- if (nvram.version <= 4)
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -812,6 +812,8 @@ void __init board_prom_init(void)
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G3_EXT_MII |
- GPIO_MODE_6348_G0_EXT_MII;
-+ else if (BCMCPU_IS_6358())
-+ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
- }
-
- bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -401,6 +401,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED (1 << 10)
- #define GPIO_MODE_6358_UTOPIA (1 << 12)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31)
-
-
- /*************************************************************************
+++ /dev/null
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -58,6 +58,7 @@ static const unsigned long bcm96338_regs
-
- static const int bcm96338_irqs[] = {
- [IRQ_TIMER] = BCM_6338_TIMER_IRQ,
-+ [IRQ_SPI] = BCM_6338_SPI_IRQ,
- [IRQ_UART0] = BCM_6338_UART0_IRQ,
- [IRQ_DSL] = BCM_6338_DSL_IRQ,
- [IRQ_ENET0] = BCM_6338_ENET0_IRQ,
-@@ -132,6 +133,7 @@ static const unsigned long bcm96348_regs
-
- static const int bcm96348_irqs[] = {
- [IRQ_TIMER] = BCM_6348_TIMER_IRQ,
-+ [IRQ_SPI] = BCM_6348_SPI_IRQ,
- [IRQ_UART0] = BCM_6348_UART0_IRQ,
- [IRQ_DSL] = BCM_6348_DSL_IRQ,
- [IRQ_ENET0] = BCM_6348_ENET0_IRQ,
-@@ -175,6 +177,7 @@ static const unsigned long bcm96358_regs
-
- static const int bcm96358_irqs[] = {
- [IRQ_TIMER] = BCM_6358_TIMER_IRQ,
-+ [IRQ_SPI] = BCM_6358_SPI_IRQ,
- [IRQ_UART0] = BCM_6358_UART0_IRQ,
- [IRQ_UART1] = BCM_6358_UART1_IRQ,
- [IRQ_DSL] = BCM_6358_DSL_IRQ,
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -0,0 +1,98 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_regs.h>
-+
-+#ifdef BCMCPU_RUNTIME_DETECT
-+/*
-+ * register offsets
-+ */
-+static const unsigned long bcm96338_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6338)
-+};
-+
-+static const unsigned long bcm96348_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6348)
-+};
-+
-+static const unsigned long bcm96358_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6358)
-+};
-+
-+const unsigned long *bcm63xx_regs_spi;
-+EXPORT_SYMBOL(bcm63xx_regs_spi);
-+
-+static __init void bcm63xx_spi_regs_init(void)
-+{
-+ if (BCMCPU_IS_6338())
-+ bcm63xx_regs_spi = bcm96338_regs_spi;
-+ if (BCMCPU_IS_6348())
-+ bcm63xx_regs_spi = bcm96348_regs_spi;
-+ if (BCMCPU_IS_6358())
-+ bcm63xx_regs_spi = bcm96358_regs_spi;
-+}
-+#else
-+static __init void bcm63xx_spi_regs_init(void) { }
-+#endif
-+
-+static struct resource spi_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct bcm63xx_spi_pdata spi_pdata = {
-+ .bus_num = 0,
-+ .num_chipselect = 8,
-+ .speed_hz = 50000000, /* Fclk */
-+};
-+
-+static struct platform_device bcm63xx_spi_device = {
-+ .name = "bcm63xx-spi",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(spi_resources),
-+ .resource = spi_resources,
-+ .dev = {
-+ .platform_data = &spi_pdata,
-+ },
-+};
-+
-+int __init bcm63xx_spi_register(void)
-+{
-+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
-+ spi_resources[0].end = spi_resources[0].start;
-+ spi_resources[0].end += RSET_SPI_SIZE - 1;
-+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-+
-+ if (BCMCPU_IS_6345())
-+ return -ENODEV;
-+
-+ /* Fill in platform data */
-+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-+ spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE;
-+
-+ if (BCMCPU_IS_6358())
-+ spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE;
-+
-+ bcm63xx_spi_regs_init();
-+
-+ return platform_device_register(&bcm63xx_spi_device);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -109,6 +109,7 @@ enum bcm63xx_regs_set {
- #define RSET_WDT_SIZE 12
- #define RSET_ENET_SIZE 2048
- #define RSET_ENETDMA_SIZE 2048
-+#define RSET_SPI_SIZE 256
- #define RSET_UART_SIZE 24
- #define RSET_UDC_SIZE 256
- #define RSET_OHCI_SIZE 256
-@@ -214,7 +215,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART0_BASE (0xfffe0100)
- #define BCM_6358_UART1_BASE (0xfffe0120)
- #define BCM_6358_GPIO_BASE (0xfffe0080)
--#define BCM_6358_SPI_BASE (0xdeadbeef)
-+#define BCM_6358_SPI_BASE (0xfffe0800)
- #define BCM_6358_UDC0_BASE (0xfffe0400)
- #define BCM_6358_OHCI0_BASE (0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
-@@ -441,6 +442,7 @@ static inline unsigned long bcm63xx_regs
- */
- enum bcm63xx_irq {
- IRQ_TIMER = 0,
-+ IRQ_SPI,
- IRQ_UART0,
- IRQ_UART1,
- IRQ_DSL,
-@@ -507,6 +509,7 @@ enum bcm63xx_irq {
- * 6348 irqs
- */
- #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
- #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
- #define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6)
-@@ -531,6 +534,7 @@ enum bcm63xx_irq {
- * 6358 irqs
- */
- #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
- #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
- #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -805,4 +805,116 @@
- #define DMIPSPLLCFG_N2_SHIFT 29
- #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT)
-
-+/*************************************************************************
-+ * _REG relative to RSET_SPI
-+ *************************************************************************/
-+
-+/* BCM 6338 SPI core */
-+#define SPI_BCM_6338_SPI_CMD 0x00 /* 16-bits register */
-+#define SPI_BCM_6338_SPI_INT_STATUS 0x02
-+#define SPI_BCM_6338_SPI_INT_MASK_ST 0x03
-+#define SPI_BCM_6338_SPI_INT_MASK 0x04
-+#define SPI_BCM_6338_SPI_ST 0x05
-+#define SPI_BCM_6338_SPI_CLK_CFG 0x06
-+#define SPI_BCM_6338_SPI_FILL_BYTE 0x07
-+#define SPI_BCM_6338_SPI_MSG_TAIL 0x09
-+#define SPI_BCM_6338_SPI_RX_TAIL 0x0b
-+#define SPI_BCM_6338_SPI_MSG_CTL 0x40
-+#define SPI_BCM_6338_SPI_MSG_DATA 0x41
-+#define SPI_BCM_6338_SPI_MSG_DATA_SIZE 0x3f
-+#define SPI_BCM_6338_SPI_RX_DATA 0x80
-+#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f
-+
-+/* BCM 6348 SPI core */
-+#define SPI_BCM_6348_SPI_CMD 0x00 /* 16-bits register */
-+#define SPI_BCM_6348_SPI_INT_STATUS 0x02
-+#define SPI_BCM_6348_SPI_INT_MASK_ST 0x03
-+#define SPI_BCM_6348_SPI_INT_MASK 0x04
-+#define SPI_BCM_6348_SPI_ST 0x05
-+#define SPI_BCM_6348_SPI_CLK_CFG 0x06
-+#define SPI_BCM_6348_SPI_FILL_BYTE 0x07
-+#define SPI_BCM_6348_SPI_MSG_TAIL 0x09
-+#define SPI_BCM_6348_SPI_RX_TAIL 0x0b
-+#define SPI_BCM_6348_SPI_MSG_CTL 0x40
-+#define SPI_BCM_6348_SPI_MSG_DATA 0x41
-+#define SPI_BCM_6348_SPI_MSG_DATA_SIZE 0x3f
-+#define SPI_BCM_6348_SPI_RX_DATA 0x80
-+#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f
-+
-+/* BCM 6358 SPI core */
-+#define SPI_BCM_6358_SPI_MSG_CTL 0x00 /* 16-bits register */
-+
-+#define SPI_BCM_6358_SPI_MSG_DATA 0x02
-+#define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e
-+
-+#define SPI_BCM_6358_SPI_RX_DATA 0x400
-+#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220
-+
-+#define SPI_BCM_6358_SPI_CMD 0x700 /* 16-bits register */
-+
-+#define SPI_BCM_6358_SPI_INT_STATUS 0x702
-+#define SPI_BCM_6358_SPI_INT_MASK_ST 0x703
-+
-+#define SPI_BCM_6358_SPI_INT_MASK 0x704
-+
-+#define SPI_BCM_6358_SPI_ST 0x705
-+
-+#define SPI_BCM_6358_SPI_CLK_CFG 0x706
-+
-+#define SPI_BCM_6358_SPI_FILL_BYTE 0x707
-+#define SPI_BCM_6358_SPI_MSG_TAIL 0x709
-+#define SPI_BCM_6358_SPI_RX_TAIL 0x70B
-+
-+/* Shared SPI definitions */
-+
-+/* Message configuration */
-+#define SPI_FD_RW 0x00
-+#define SPI_HD_W 0x01
-+#define SPI_HD_R 0x02
-+#define SPI_BYTE_CNT_SHIFT 0
-+#define SPI_MSG_TYPE_SHIFT 14
-+
-+/* Command */
-+#define SPI_CMD_NOOP 0x00
-+#define SPI_CMD_SOFT_RESET 0x01
-+#define SPI_CMD_HARD_RESET 0x02
-+#define SPI_CMD_START_IMMEDIATE 0x03
-+#define SPI_CMD_COMMAND_SHIFT 0
-+#define SPI_CMD_COMMAND_MASK 0x000f
-+#define SPI_CMD_DEVICE_ID_SHIFT 4
-+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
-+#define SPI_CMD_ONE_BYTE_SHIFT 11
-+#define SPI_CMD_ONE_WIRE_SHIFT 12
-+#define SPI_DEV_ID_0 0
-+#define SPI_DEV_ID_1 1
-+#define SPI_DEV_ID_2 2
-+#define SPI_DEV_ID_3 3
-+
-+/* Interrupt mask */
-+#define SPI_INTR_CMD_DONE 0x01
-+#define SPI_INTR_RX_OVERFLOW 0x02
-+#define SPI_INTR_TX_UNDERFLOW 0x04
-+#define SPI_INTR_TX_OVERFLOW 0x08
-+#define SPI_INTR_RX_UNDERFLOW 0x10
-+#define SPI_INTR_CLEAR_ALL 0x1f
-+
-+/* Status */
-+#define SPI_RX_EMPTY 0x02
-+#define SPI_CMD_BUSY 0x04
-+#define SPI_SERIAL_BUSY 0x08
-+
-+/* Clock configuration */
-+#define SPI_CLK_20MHZ 0x00
-+#define SPI_CLK_0_391MHZ 0x01
-+#define SPI_CLK_0_781MHZ 0x02 /* default */
-+#define SPI_CLK_1_563MHZ 0x03
-+#define SPI_CLK_3_125MHZ 0x04
-+#define SPI_CLK_6_250MHZ 0x05
-+#define SPI_CLK_12_50MHZ 0x06
-+#define SPI_CLK_25MHZ 0x07
-+#define SPI_CLK_MASK 0x07
-+#define SPI_SSOFFTIME_MASK 0x38
-+#define SPI_SSOFFTIME_SHIFT 3
-+#define SPI_BYTE_SWAP 0x80
-+
- #endif /* BCM63XX_REGS_H_ */
---- /dev/null
-+++ b/drivers/spi/bcm63xx_spi.c
-@@ -0,0 +1,496 @@
-+/*
-+ * Broadcom BCM63xx SPI controller support
-+ *
-+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/completion.h>
-+#include <linux/err.h>
-+
-+#include <bcm63xx_dev_spi.h>
-+
-+#define PFX KBUILD_MODNAME
-+#define DRV_VER "0.1.2"
-+
-+struct bcm63xx_spi {
-+ spinlock_t lock;
-+ int stopping;
-+ struct completion done;
-+
-+ void __iomem *regs;
-+ int irq;
-+
-+ /* Platform data */
-+ u32 speed_hz;
-+ unsigned fifo_size;
-+
-+ /* Data buffers */
-+ const unsigned char *tx_ptr;
-+ unsigned char *rx_ptr;
-+
-+ /* data iomem */
-+ u8 __iomem *tx_io;
-+ const u8 __iomem *rx_io;
-+
-+ int remaining_bytes;
-+
-+ struct clk *clk;
-+ struct platform_device *pdev;
-+};
-+
-+static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
-+ unsigned int offset)
-+{
-+ return bcm_readw(bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
-+ unsigned int offset)
-+{
-+ return bcm_readw(bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
-+ u8 value, unsigned int offset)
-+{
-+ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
-+ u16 value, unsigned int offset)
-+{
-+ bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ u8 bits_per_word;
-+ u8 clk_cfg;
-+ u32 hz;
-+ unsigned int div;
-+
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+
-+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
-+ if (bits_per_word != 8) {
-+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-+ __func__, bits_per_word);
-+ return -EINVAL;
-+ }
-+
-+ if (spi->chip_select > spi->master->num_chipselect) {
-+ dev_err(&spi->dev, "%s, unsupported slave %d\n",
-+ __func__, spi->chip_select);
-+ return -EINVAL;
-+ }
-+
-+ /* Check clock setting */
-+ div = (bs->speed_hz / hz);
-+ switch (div) {
-+ case 2:
-+ clk_cfg = SPI_CLK_25MHZ;
-+ break;
-+ case 4:
-+ clk_cfg = SPI_CLK_12_50MHZ;
-+ break;
-+ case 8:
-+ clk_cfg = SPI_CLK_6_250MHZ;
-+ break;
-+ case 16:
-+ clk_cfg = SPI_CLK_3_125MHZ;
-+ break;
-+ case 32:
-+ clk_cfg = SPI_CLK_1_563MHZ;
-+ break;
-+ case 64:
-+ clk_cfg = SPI_CLK_0_781MHZ;
-+ break;
-+ case 128:
-+ default:
-+ /* Set to slowest mode for compatibility */
-+ clk_cfg = SPI_CLK_0_391MHZ;
-+ break;
-+ }
-+
-+ bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG);
-+ dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
-+ div, hz, clk_cfg);
-+
-+ return 0;
-+}
-+
-+/* the spi->mode bits understood by this driver: */
-+#define MODEBITS (SPI_CPOL | SPI_CPHA)
-+
-+static int bcm63xx_spi_setup(struct spi_device *spi)
-+{
-+ struct bcm63xx_spi *bs;
-+ int ret;
-+
-+ bs = spi_master_get_devdata(spi->master);
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ if (!spi->bits_per_word)
-+ spi->bits_per_word = 8;
-+
-+ if (spi->mode & ~MODEBITS) {
-+ dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-+ __func__, spi->mode & ~MODEBITS);
-+ return -EINVAL;
-+ }
-+
-+ ret = bcm63xx_spi_setup_transfer(spi, NULL);
-+ if (ret < 0) {
-+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
-+ spi->mode & ~MODEBITS);
-+ return ret;
-+ }
-+
-+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
-+
-+ return 0;
-+}
-+
-+/* Fill the TX FIFO with as many bytes as possible */
-+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
-+{
-+ u8 size;
-+
-+ /* Fill the Tx FIFO with as many bytes as possible */
-+ size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
-+ bs->fifo_size;
-+ memcpy_toio(bs->tx_io, bs->tx_ptr, size);
-+ bs->remaining_bytes -= size;
-+}
-+
-+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+ u16 msg_ctl;
-+ u16 cmd;
-+
-+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-+ t->tx_buf, t->rx_buf, t->len);
-+
-+ /* Transmitter is inhibited */
-+ bs->tx_ptr = t->tx_buf;
-+ bs->rx_ptr = t->rx_buf;
-+ init_completion(&bs->done);
-+
-+ if (t->tx_buf) {
-+ bs->remaining_bytes = t->len;
-+ bcm63xx_spi_fill_tx_fifo(bs);
-+ }
-+
-+ /* Enable the command done interrupt which
-+ * we use to determine completion of a command */
-+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+
-+ /* Fill in the Message control register */
-+ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-+
-+ if (t->rx_buf && t->tx_buf)
-+ msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
-+ else if (t->rx_buf)
-+ msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
-+ else if (t->tx_buf)
-+ msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
-+
-+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
-+
-+ /* Issue the transfer */
-+ cmd = SPI_CMD_START_IMMEDIATE;
-+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+ cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
-+ bcm_spi_writew(bs, cmd, SPI_CMD);
-+ wait_for_completion(&bs->done);
-+
-+ /* Disable the CMD_DONE interrupt */
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
-+ return t->len - bs->remaining_bytes;
-+}
-+
-+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+ struct spi_transfer *t;
-+ int ret = 0;
-+
-+ if (unlikely(list_empty(&m->transfers)))
-+ return -EINVAL;
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ ret += bcm63xx_txrx_bufs(spi, t);
-+ }
-+
-+ m->complete(m->context);
-+
-+ return ret;
-+}
-+
-+/* This driver supports single master mode only. Hence
-+ * CMD_DONE is the only interrupt we care about
-+ */
-+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
-+{
-+ struct spi_master *master = (struct spi_master *)dev_id;
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+ u8 intr;
-+ u16 cmd;
-+
-+ /* Read interupts and clear them immediately */
-+ intr = bcm_spi_readb(bs, SPI_INT_STATUS);
-+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
-+ /* A tansfer completed */
-+ if (intr & SPI_INTR_CMD_DONE) {
-+ u8 rx_tail;
-+
-+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+ /* Read out all the data */
-+ if (rx_tail)
-+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-+
-+ /* See if there is more data to send */
-+ if (bs->remaining_bytes > 0) {
-+ bcm63xx_spi_fill_tx_fifo(bs);
-+
-+ /* Start the transfer */
-+ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
-+ SPI_MSG_CTL);
-+ cmd = bcm_spi_readw(bs, SPI_CMD);
-+ cmd |= SPI_CMD_START_IMMEDIATE;
-+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+ bcm_spi_writew(bs, cmd, SPI_CMD);
-+ } else {
-+ complete(&bs->done);
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __init bcm63xx_spi_probe(struct platform_device *pdev)
-+{
-+ struct resource *r;
-+ struct device *dev = &pdev->dev;
-+ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
-+ int irq;
-+ struct spi_master *master;
-+ struct clk *clk;
-+ struct bcm63xx_spi *bs;
-+ int ret;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!r) {
-+ dev_err(dev, "no iomem\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(dev, "no irq\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ clk = clk_get(dev, "spi");
-+ if (IS_ERR(clk)) {
-+ dev_err(dev, "no clock for device\n");
-+ ret = -ENODEV;
-+ goto out;
-+ }
-+
-+ master = spi_alloc_master(dev, sizeof(*bs));
-+ if (!master) {
-+ dev_err(dev, "out of memory\n");
-+ ret = -ENOMEM;
-+ goto out_free;
-+ }
-+
-+ bs = spi_master_get_devdata(master);
-+ init_completion(&bs->done);
-+
-+ platform_set_drvdata(pdev, master);
-+ bs->pdev = pdev;
-+
-+ if (!request_mem_region(r->start, r->end - r->start, PFX)) {
-+ dev_err(dev, "iomem request failed\n");
-+ ret = -ENXIO;
-+ goto out_put_master;
-+ }
-+
-+ bs->regs = ioremap_nocache(r->start, r->end - r->start);
-+ if (!bs->regs) {
-+ dev_err(dev, "unable to ioremap regs\n");
-+ ret = -ENOMEM;
-+ goto out_put_master;
-+ }
-+ bs->irq = irq;
-+ bs->clk = clk;
-+ bs->fifo_size = pdata->fifo_size;
-+
-+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master);
-+ if (ret) {
-+ dev_err(dev, "unable to request irq\n");
-+ goto out_unmap;
-+ }
-+
-+ master->bus_num = pdata->bus_num;
-+ master->num_chipselect = pdata->num_chipselect;
-+ master->setup = bcm63xx_spi_setup;
-+ master->transfer = bcm63xx_transfer;
-+ bs->speed_hz = pdata->speed_hz;
-+ bs->stopping = 0;
-+ bs->tx_io = (u8*)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
-+ bs->rx_io = (const u8*)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-+ spin_lock_init(&bs->lock);
-+
-+ /* Initialize hardware */
-+ clk_enable(bs->clk);
-+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-+
-+ /* register and we are done */
-+ ret = spi_register_master(master);
-+ if (ret) {
-+ dev_err(dev, "spi register failed\n");
-+ goto out_reset_hw;
-+ }
-+
-+ dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
-+ r->start, irq, bs->fifo_size, DRV_VER);
-+
-+ return 0;
-+
-+out_reset_hw:
-+ clk_disable(clk);
-+ free_irq(irq, master);
-+out_unmap:
-+ iounmap(bs->regs);
-+out_put_master:
-+ spi_master_put(master);
-+out_free:
-+ clk_put(clk);
-+out:
-+ return ret;
-+}
-+
-+static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ /* reset spi block */
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+ spin_lock(&bs->lock);
-+ bs->stopping = 1;
-+
-+ /* HW shutdown */
-+ clk_disable(bs->clk);
-+ clk_put(bs->clk);
-+
-+ spin_unlock(&bs->lock);
-+
-+ free_irq(bs->irq, master);
-+ iounmap(bs->regs);
-+ release_mem_region(r->start, r->end - r->start);
-+ platform_set_drvdata(pdev, 0);
-+ spi_unregister_master(master);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+
-+ clk_disable(bs->clk);
-+
-+ return 0;
-+}
-+
-+static int bcm63xx_spi_resume(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+
-+ clk_enable(bs->clk);
-+
-+ return 0;
-+}
-+#else
-+#define bcm63xx_spi_suspend NULL
-+#define bcm63xx_spi_resume NULL
-+#endif
-+
-+static struct platform_driver bcm63xx_spi_driver = {
-+ .driver = {
-+ .name = "bcm63xx-spi",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = bcm63xx_spi_probe,
-+ .remove = __exit_p(bcm63xx_spi_remove),
-+ .suspend = bcm63xx_spi_suspend,
-+ .resume = bcm63xx_spi_resume,
-+};
-+
-+
-+static int __init bcm63xx_spi_init(void)
-+{
-+ return platform_driver_register(&bcm63xx_spi_driver);
-+}
-+
-+static void __exit bcm63xx_spi_exit(void)
-+{
-+ platform_driver_unregister(&bcm63xx_spi_driver);
-+}
-+
-+module_init(bcm63xx_spi_init);
-+module_exit(bcm63xx_spi_exit);
-+
-+MODULE_ALIAS("platform:bcm63xx_spi");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
-+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VER);
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -74,6 +74,12 @@ config SPI_ATMEL
- This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
-
-+config SPI_BCM63XX
-+ tristate "Broadcom BCM63xx SPI controller"
-+ depends on BCM63XX
-+ help
-+ This is the SPI controller master driver for Broadcom BCM63xx SoC.
-+
- config SPI_BFIN
- tristate "SPI controller driver for ADI Blackfin5xx"
- depends on BLACKFIN
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
- obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
-+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o
-
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y := spi_s3c24xx.o
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -0,0 +1,85 @@
-+#ifndef BCM63XX_DEV_SPI_H
-+#define BCM63XX_DEV_SPI_H
-+
-+#include <linux/types.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+
-+int __init bcm63xx_spi_register(void);
-+
-+struct bcm63xx_spi_pdata {
-+ unsigned int fifo_size;
-+ int bus_num;
-+ int num_chipselect;
-+ u32 speed_hz;
-+};
-+
-+enum bcm63xx_regs_spi {
-+ SPI_CMD,
-+ SPI_INT_STATUS,
-+ SPI_INT_MASK_ST,
-+ SPI_INT_MASK,
-+ SPI_ST,
-+ SPI_CLK_CFG,
-+ SPI_FILL_BYTE,
-+ SPI_MSG_TAIL,
-+ SPI_RX_TAIL,
-+ SPI_MSG_CTL,
-+ SPI_MSG_DATA,
-+ SPI_RX_DATA,
-+};
-+
-+#define __GEN_SPI_RSET_BASE(__cpu, __rset) \
-+ case SPI_## __rset: \
-+ return SPI_BCM_## __cpu ##_SPI_## __rset;
-+
-+#define __GEN_SPI_RSET(__cpu) \
-+ switch (reg) { \
-+ __GEN_SPI_RSET_BASE(__cpu, CMD) \
-+ __GEN_SPI_RSET_BASE(__cpu, INT_STATUS) \
-+ __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST) \
-+ __GEN_SPI_RSET_BASE(__cpu, INT_MASK) \
-+ __GEN_SPI_RSET_BASE(__cpu, ST) \
-+ __GEN_SPI_RSET_BASE(__cpu, CLK_CFG) \
-+ __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE) \
-+ __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL) \
-+ __GEN_SPI_RSET_BASE(__cpu, RX_TAIL) \
-+ __GEN_SPI_RSET_BASE(__cpu, MSG_CTL) \
-+ __GEN_SPI_RSET_BASE(__cpu, MSG_DATA) \
-+ __GEN_SPI_RSET_BASE(__cpu, RX_DATA) \
-+ }
-+
-+#define __GEN_SPI_REGS_TABLE(__cpu) \
-+ [SPI_CMD] = SPI_BCM_## __cpu ##_SPI_CMD, \
-+ [SPI_INT_STATUS] = SPI_BCM_## __cpu ##_SPI_INT_STATUS, \
-+ [SPI_INT_MASK_ST] = SPI_BCM_## __cpu ##_SPI_INT_MASK_ST, \
-+ [SPI_INT_MASK] = SPI_BCM_## __cpu ##_SPI_INT_MASK, \
-+ [SPI_ST] = SPI_BCM_## __cpu ##_SPI_ST, \
-+ [SPI_CLK_CFG] = SPI_BCM_## __cpu ##_SPI_CLK_CFG, \
-+ [SPI_FILL_BYTE] = SPI_BCM_## __cpu ##_SPI_FILL_BYTE, \
-+ [SPI_MSG_TAIL] = SPI_BCM_## __cpu ##_SPI_MSG_TAIL, \
-+ [SPI_RX_TAIL] = SPI_BCM_## __cpu ##_SPI_RX_TAIL, \
-+ [SPI_MSG_CTL] = SPI_BCM_## __cpu ##_SPI_MSG_CTL, \
-+ [SPI_MSG_DATA] = SPI_BCM_## __cpu ##_SPI_MSG_DATA, \
-+ [SPI_RX_DATA] = SPI_BCM_## __cpu ##_SPI_RX_DATA,
-+
-+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
-+{
-+#ifdef BCMCPU_RUNTIME_DETECT
-+ extern const unsigned long *bcm63xx_regs_spi;
-+ return bcm63xx_regs_spi[reg];
-+#else
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+ __GEN_SPI_RSET(6338)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+ __GEN_SPI_RSET(6348)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+ __GEN_SPI_RSET(6358)
-+#endif
-+#endif
-+ return 0;
-+}
-+
-+#endif /* BCM63XX_DEV_SPI_H */
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-- dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
-+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o dev-spi.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -30,6 +30,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_udc.h>
-+#include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-
- #define PFX "board_bcm963xx: "
-@@ -921,6 +922,8 @@ int __init board_register_devices(void)
- if (board.num_spis)
- spi_register_board_info(board.spis, board.num_spis);
-
-+ bcm63xx_spi_register();
-+
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -32,9 +32,13 @@
- #include <bcm63xx_dev_usb_udc.h>
- #include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-+#include <bcm_tag.h>
-
- #define PFX "board_bcm963xx: "
-
-+#define CFE_OFFSET_64K 0x10000
-+#define CFE_OFFSET_128K 0x20000
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -723,6 +727,29 @@ static int board_get_mac_address(u8 *mac
- return 0;
- }
-
-+static void __init boardid_fixup(u8 *boot_addr)
-+{
-+ struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+
-+ /* check if bcm_tag is at 64k offset */
-+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
-+ /* else try 128k */
-+ tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-+ if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
-+ /* No tag found */
-+ printk(KERN_DEBUG "No bcm_tag found!\n");
-+ return;
-+ }
-+ }
-+ /* check if we should override the boardid */
-+ if (tag->information1[0] != '+')
-+ return;
-+
-+ strncpy(nvram.name, &tag->information1[1], BOARDID_LEN);
-+
-+ printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name);
-+}
-+
- /*
- * early init callback, read nvram data from flash and checksum it
- */
-@@ -765,6 +792,11 @@ void __init board_prom_init(void)
- return;
- }
-
-+ if (strcmp(cfe_version, "unknown") != 0) {
-+ /* cfe present */
-+ boardid_fixup(boot_addr);
-+ }
-+
- /* find board by name */
- for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- if (strncmp(nvram.name, bcm963xx_boards[i]->name,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -850,17 +850,6 @@ void __init board_prom_init(void)
- }
-
- bcm_gpio_writel(val, GPIO_MODE_REG);
--
-- /* Generate MAC address for WLAN and
-- * register our SPROM */
--#ifdef CONFIG_SSB_PCIHOST
-- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-- printk(KERN_ERR "failed to register fallback SPROM\n");
-- }
--#endif
- }
-
- /*
-@@ -936,6 +925,18 @@ int __init board_register_devices(void)
- !board_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
-+ /* Generate MAC address for WLAN and
-+ * register our SPROM, do this after registering enet devices
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+ if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-+ memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+ memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+ if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-+ printk(KERN_ERR "failed to register fallback SPROM\n");
-+ }
-+#endif
-+
- if (board.has_ehci0)
- bcm63xx_ehci_register();
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -603,6 +603,99 @@ static struct board_info __initdata boar
-
- .has_ohci0 = 1,
- .has_ehci0 = 1,
-+
-+ .leds = {
-+ /*Each led on alice gate is bi-color */
-+ {
-+ .name = "power:red",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power:green",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "service:red",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:green",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "adsl:red",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "adsl:green",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi:red",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi:green",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "internet:red",
-+ .gpio = 25,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "internet:green",
-+ .gpio = 24,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr1:red",
-+ .gpio = 27,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr1:green",
-+ .gpio = 26,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr2:red",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr2:green",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 37,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_DWVS0 = {
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,7 +57,7 @@ struct board_info {
- struct bcm63xx_dsp_platform_data dsp;
-
- /* GPIO LEDs */
-- struct gpio_led leds[5];
-+ struct gpio_led leds[14];
-
- /* Buttons */
- struct gpio_button buttons[2];
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -475,6 +475,19 @@ static struct board_info __initdata boar
- },
-
- .has_ohci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usb",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }
-+ },
- };
- #endif
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -489,6 +489,55 @@ static struct board_info __initdata boar
- }
- },
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+ .name = "D-4P-W",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+ .has_uart0 = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "power:green",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "status",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "internet:green",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "internet:red",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 7,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
- #endif
-
- /*
-@@ -753,6 +802,7 @@ static const struct board_info __initdat
- &board_DV201AMR,
- &board_96348gw_a,
- &board_rta1025w_16,
-+ &board_96348_D4PW,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,9 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_buttons.h>
- #include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -39,6 +42,12 @@
- #define CFE_OFFSET_64K 0x10000
- #define CFE_OFFSET_128K 0x20000
-
-+#define NB4_PID_OFFSET 0xff80
-+#define NB4_74X164_GPIO_BASE 64
-+#define NB4_SPI_GPIO_MOSI 7
-+#define NB4_SPI_GPIO_CLK 6
-+#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -780,6 +789,502 @@ static struct board_info __initdata boar
-
- .has_ohci0 = 1,
- };
-+
-+struct spi_gpio_platform_data nb4_spi_gpio_data = {
-+ .sck = NB4_SPI_GPIO_CLK,
-+ .mosi = NB4_SPI_GPIO_MOSI,
-+ .miso = SPI_GPIO_NO_MISO,
-+ .num_chipselect = 1,
-+};
-+
-+
-+static struct platform_device nb4_spi_gpio = {
-+ .name = "spi_gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &nb4_spi_gpio_data,
-+ },
-+};
-+
-+static struct platform_device * __initdata nb4_devices[] = {
-+ &nb4_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
-+ .base = NB4_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info nb4_spi_devices[] = {
-+ {
-+ .modalias = "74x164",
-+ .max_speed_hz = 781000,
-+ .bus_num = 1,
-+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+ .mode = SPI_MODE_0,
-+ .platform_data = &nb4_74x164_platform_data
-+ }
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+ .name = "NB4-SER-r0",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_udc0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "traffic",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:red",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:green",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:blue",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+ .name = "NB4-SER-r1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_udc0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "traffic",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:red",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:green",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:blue",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+ .name = "NB4-SER-r2",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "traffic",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:red",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:green",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:blue",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+ .name = "NB4-FXC-r1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_udc0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "traffic",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi",
-+ .gpio = 15,
-+ },
-+ {
-+ .name = "alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:red",
-+ .gpio = 29,
-+ },
-+ {
-+ .name = "service:green",
-+ .gpio = 30,
-+ },
-+ {
-+ .name = "service:blue",
-+ .gpio = 4,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+ .name = "NB4-FXC-r2",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "traffic",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi",
-+ .gpio = 15,
-+ },
-+ {
-+ .name = "alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "service:red",
-+ .gpio = 29,
-+ },
-+ {
-+ .name = "service:green",
-+ .gpio = 30,
-+ },
-+ {
-+ .name = "service:blue",
-+ .gpio = 4,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
- #endif
-
- /*
-@@ -810,9 +1315,30 @@ static const struct board_info __initdat
- &board_96358vw2,
- &board_AGPFS0,
- &board_DWVS0,
-+ &board_nb4_ser_r0,
-+ &board_nb4_ser_r1,
-+ &board_nb4_ser_r2,
-+ &board_nb4_fxc_r1,
-+ &board_nb4_fxc_r2,
- #endif
- };
-
-+static void __init nb4_nvram_fixup(void)
-+{
-+ u8 *boot_addr, *p;
-+ u32 val;
-+
-+ if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+ boot_addr = (u8 *)KSEG1ADDR(val);
-+ /* Extract nb4 PID */
-+ p = boot_addr + NB4_PID_OFFSET;
-+ if (!memcmp(p, "NB4-", 4))
-+ memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
-+ }
-+}
-+
- /*
- * Register a sane SPROMv2 to make the on-board
- * bcm4318 WLAN work
-@@ -953,6 +1479,9 @@ void __init board_prom_init(void)
- boardid_fixup(boot_addr);
- }
-
-+ /* Fixup broken nb4 board name */
-+ nb4_nvram_fixup();
-+
- /* find board by name */
- for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- if (strncmp(nvram.name, bcm963xx_boards[i]->name,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -146,6 +146,38 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+ .name = "96338W2_E7T",
-+ .expected_cpu_id = 0x6338,
-+
-+ .has_enet0 = 1,
-+
-+ .enet0 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "ppp",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ppp-fail",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1294,6 +1326,7 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
- &board_96338w,
-+ &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -685,6 +685,98 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_CPVA642 = {
-+ .name = "CPVA642",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ /* bi-color */
-+ {
-+ .name = "power:red",
-+ .gpio = 14,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power:green",
-+ .gpio = 11,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "wifi:red",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi:green",
-+ .gpio = 28,
-+ .active_low = 0,
-+ },
-+ {
-+ .name = "link:red",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "link:green",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+ /* green only */
-+ {
-+ .name = "ether",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "phone1",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "phone2",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usb",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
- .name = "AGPF-S0",
- .expected_cpu_id = 0x6358,
-@@ -1347,6 +1439,7 @@ static const struct board_info __initdat
- &board_96358vw,
- &board_96358vw2,
- &board_AGPFS0,
-+ &board_CPVA642,
- &board_DWVS0,
- &board_nb4_ser_r0,
- &board_nb4_ser_r1,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -914,6 +914,59 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- };
-
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+ .name = "AW4139",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "dsl-274xb:green:power",
-+ .gpio = 5,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "dsl-274xb:red:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:adsl",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:internet",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "dsl-274xb:red:internet",
-+ .gpio = 10,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
- struct spi_gpio_platform_data nb4_spi_gpio_data = {
- .sck = NB4_SPI_GPIO_CLK,
- .mosi = NB4_SPI_GPIO_MOSI,
-@@ -1441,6 +1494,7 @@ static const struct board_info __initdat
- &board_AGPFS0,
- &board_CPVA642,
- &board_DWVS0,
-+ &board_dsl_274xb_rev_c,
- &board_nb4_ser_r0,
- &board_nb4_ser_r1,
- &board_nb4_ser_r2,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -579,6 +579,67 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_spw500v = {
-+ .name = "SPW500V",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 6,
-+ .gpio_int = 34,
-+ .ext_irq = 2,
-+ .cs = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "power:red",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power:green",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ { .name = "pstn",
-+ .gpio = 28,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "voip",
-+ .gpio = 32,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
- #endif
-
- /*
-@@ -1486,6 +1547,7 @@ static const struct board_info __initdat
- &board_96348gw_a,
- &board_rta1025w_16,
- &board_96348_D4PW,
-+ &board_spw500v,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -432,6 +432,112 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_gw6200 = {
-+ .name = "GW6200",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */
-+ .gpio_int = 34,
-+ .ext_irq = 2,
-+ .cs = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "line1",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "line2",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "line3",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "tel",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+ .name = "GW6000",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 6,
-+ .gpio_int = 34,
-+ .ext_irq = 2,
-+ .cs = 2,
-+ },
-+
-+ /* GW6000 has no GPIO-controlled leds */
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
- .name = "F@ST2404",
- .expected_cpu_id = 0x6348,
-@@ -1540,6 +1646,8 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6348
- &board_96348r,
- &board_96348gw,
-+ &board_gw6000,
-+ &board_gw6200,
- &board_96348gw_10,
- &board_96348gw_11,
- &board_FAST2404,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -746,6 +746,76 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_96348sv = {
-+ .name = "MAGIC",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ /* is has BP_ENET_EXTERNAL_PHY */
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 25,
-+ .gpio_int = 34,
-+ .cs = 2,
-+ .ext_irq = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "voip",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "adsl",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi",
-+ .gpio = 28,
-+ },
-+ {
-+ .name = "usb",
-+ .gpio = 35,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "hpna",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "stop",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ },
-+};
-+
- #endif
-
- /*
-@@ -1656,6 +1726,7 @@ static const struct board_info __initdat
- &board_rta1025w_16,
- &board_96348_D4PW,
- &board_spw500v,
-+ &board_96348sv,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1699,6 +1699,81 @@ static struct board_info __initdata boar
- .spis = nb4_spi_devices,
- .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+ .name = "HW553",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ /*Each led on HW553 is bi-color (except wifi) */
-+ {
-+ .name = "lan:red",
-+ .gpio = 34,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "lan:blue",
-+ .gpio = 35,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "adsl:red",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "adsl:blue",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power:red",
-+ .gpio = 5,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+
-+ {
-+ .name = "power:blue",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi:red",
-+ .gpio = 25,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "internetkey:red",
-+ .gpio = 12,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "internetkey:blue",
-+ .gpio = 13,
-+ .active_low = 1,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1741,6 +1816,7 @@ static const struct board_info __initdat
- &board_nb4_ser_r2,
- &board_nb4_fxc_r1,
- &board_nb4_fxc_r2,
-+ &board_HW553,
- #endif
- };
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -178,6 +178,43 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+ .name = "RTA1320_16M",
-+ .expected_cpu_id = 0x6338,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+
-+ .enet0 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "adsl",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "ppp",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "stop",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1784,6 +1821,7 @@ static const struct board_info __initdat
- &board_96338gw,
- &board_96338w,
- &board_96338w2_e7t,
-+ &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1811,6 +1811,72 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+ .name = "96358-502V",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "spw303v:green:power+adsl",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:red:power+adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:ppp",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:ses",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:voip",
-+ .gpio = 27,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:pots",
-+ .gpio = 31,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 11,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ {
-+ .desc = "ses",
-+ .gpio = 37,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .threshold = 3,
-+ },
-+ }
-+};
- #endif
-
- /*
-@@ -1855,6 +1921,7 @@ static const struct board_info __initdat
- &board_nb4_fxc_r1,
- &board_nb4_fxc_r2,
- &board_HW553,
-+ &board_spw303v,
- #endif
- };
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -853,6 +853,63 @@ static struct board_info __initdata boar
- },
- };
-
-+ static struct board_info __initdata board_V2500V_BB = {
-+ .name = "V2500V_BB",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "power:green",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "power:red",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ { .name = "ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wireless",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 31,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
- #endif
-
- /*
-@@ -1906,6 +1963,7 @@ static const struct board_info __initdat
- &board_96348_D4PW,
- &board_spw500v,
- &board_96348sv,
-+ &board_V2500V_BB,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -2048,6 +2106,22 @@ void __init board_prom_init(void)
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
- boot_addr = (u8 *)KSEG1ADDR(val);
-+ printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+ /* Do an early check of CFE and then select bank 0 */
-+
-+ if (boot_addr == (u8 *)0xbf800000) {
-+ u8 *tmp_boot_addr;
-+ tmp_boot_addr = (u8 *)0xbfc00000; // Address of Bank 0
-+ memcpy(&nvram, tmp_boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-+ if (!strcmp(nvram.name, "V2500V_BB")) {
-+ printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
-+ boot_addr = (u8 *)0xbfc00000; // Bank 0
-+ }
-+ }
-
- /* dump cfe version */
- cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
-@@ -2248,6 +2322,13 @@ int __init board_register_devices(void)
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
-
-+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks
-+ * Loading from CFE always uses Bank 0 */
-+ if (!strcmp(board.name, "V2500V_BB")) {
-+ printk(KERN_INFO PFX "V2500V: Start in Bank 0\n");
-+ val = val + 0x400000; /* Select Bank 0 start address */
-+ }
-+
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -401,6 +401,62 @@ static struct board_info __initdata boar
- },
- };
-
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+ .name = "V2110",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "V2110:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "V2110:red:power",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "V2110:green:adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ { .name = "V2110:green:ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "V2110:green:wireless",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -1964,6 +2020,7 @@ static const struct board_info __initdat
- &board_spw500v,
- &board_96348sv,
- &board_V2500V_BB,
-+ &board_V2110,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
- select SSB
- help
-
-+config BOARD_LIVEBOX
-+ bool "Inventel Livebox(es) boards"
-+ select SSB
-+ help
-+ Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o
-
- ccflags-y := -Werror
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,228 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/gpio_buttons.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX "board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox = {
-+ .name = "Livebox",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+ &board_livebox
-+#endif
-+};
-+
-+/*
-+ * early init callback
-+ */
-+void __init board_prom_init(void)
-+{
-+ u32 val;
-+
-+ /* read base address of boot chip select (0) */
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+
-+ /* assume board is a Livebox */
-+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+ /* setup pin multiplexing depending on board enabled device,
-+ * this has to be done this early since PCI init is done
-+ * inside arch_initcall */
-+ val = 0;
-+
-+ if (board.has_pci) {
-+ bcm63xx_pci_enabled = 1;
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G2_PCI;
-+ }
-+
-+ if (board.has_pccard) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+ }
-+
-+ if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G3_EXT_MII |
-+ GPIO_MODE_6348_G0_EXT_MII;
-+ }
-+
-+ if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G3_EXT_MII |
-+ GPIO_MODE_6348_G0_EXT_MII;
-+ }
-+
-+ bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+ if (!board.name[0])
-+ panic("unable to detect bcm963xx board");
-+ printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+ /* make sure we're running on expected cpu */
-+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+ panic("unexpected CPU for bcm963xx board");
-+}
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+ return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+
-+static int board_get_mac_address(u8 *mac)
-+{
-+ u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
-+ u8 *p;
-+ int count;
-+
-+ memcpy(mac, default_mac, ETH_ALEN);
-+
-+ p = mac + ETH_ALEN - 1;
-+ count = mac_addr_used;
-+
-+ while (count--) {
-+ do {
-+ (*p)++;
-+ if (*p != 0)
-+ break;
-+ p--;
-+ } while (p != mac);
-+ }
-+
-+ if (p == mac) {
-+ printk(KERN_ERR PFX "unable to fetch mac address\n");
-+ return -ENODEV;
-+ }
-+ mac_addr_used++;
-+
-+ return 0;
-+}
-+
-+static struct resource mtd_resources[] = {
-+ {
-+ .start = 0, /* filled at runtime */
-+ .end = 0, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device mtd_dev = {
-+ .name = "bcm963xx-flash",
-+ .resource = mtd_resources,
-+ .num_resources = ARRAY_SIZE(mtd_resources),
-+};
-+
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+ u32 val;
-+
-+ if (board.has_uart0)
-+ bcm63xx_uart_register(0);
-+
-+ if (board.has_pccard)
-+ bcm63xx_pcmcia_register();
-+
-+ if (board.has_enet0 &&
-+ !board_get_mac_address(board.enet0.mac_addr))
-+ bcm63xx_enet_register(0, &board.enet0);
-+
-+ if (board.has_enet1 &&
-+ !board_get_mac_address(board.enet1.mac_addr))
-+ bcm63xx_enet_register(1, &board.enet1);
-+
-+ if (board.has_ohci0)
-+ bcm63xx_ohci_register();
-+
-+ if (board.has_ehci0)
-+ bcm63xx_ehci_register();
-+
-+
-+ /* read base address of boot chip select (0) */
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+ mtd_resources[0].start = val;
-+ mtd_resources[0].end = 0x1FFFFFFF;
-+
-+ platform_device_register(&mtd_dev);
-+
-+ return 0;
-+}
-+
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -457,6 +457,49 @@ static struct board_info __initdata boar
- };
-
-
-+static struct board_info __initdata board_ct536_ct5621 = {
-+ .name = "CT536_CT5621",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 0,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "adsl-fail",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .threshold = 3,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -2021,6 +2064,7 @@ static const struct board_info __initdat
- &board_96348sv,
- &board_V2500V_BB,
- &board_V2110,
-+ &board_ct536_ct5621,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1327,6 +1327,8 @@ static struct board_info __initdata boar
- .name = "DWV-S0",
- .expected_cpu_id = 0x6358,
-
-+ .has_uart0 = 1,
-+
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-@@ -1342,6 +1344,7 @@ static struct board_info __initdata boar
- },
-
- .has_ohci0 = 1,
-+ .has_ehci0 = 1,
- };
-
- /* D-Link DSL-274xB revison C2/C3 */
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2128,6 +2128,17 @@ static struct ssb_sprom bcm63xx_sprom =
- .boardflags_lo = 0x2848,
- .boardflags_hi = 0x0000,
- };
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+ if (bus->bustype == SSB_BUSTYPE_PCI) {
-+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+ return 0;
-+ } else {
-+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+ return -EINVAL;
-+ }
-+}
- #endif
-
- /*
-@@ -2397,8 +2408,9 @@ int __init board_register_devices(void)
- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-- printk(KERN_ERR "failed to register fallback SPROM\n");
-+ if (ssb_arch_register_fallback_sprom(
-+ &bcm63xx_get_fallback_sprom) < 0)
-+ printk(KERN_ERR PFX "failed to register fallback SPROM\n");
- }
- #endif
-
+++ /dev/null
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2108,7 +2108,7 @@ static void __init nb4_nvram_fixup(void)
- * bcm4318 WLAN work
- */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+struct ssb_sprom bcm63xx_sprom = {
- .revision = 0x02,
- .board_rev = 0x17,
- .country_code = 0x0,
-@@ -2128,6 +2128,7 @@ static struct ssb_sprom bcm63xx_sprom =
- .boardflags_lo = 0x2848,
- .boardflags_hi = 0x0000,
- };
-+EXPORT_SYMBOL(bcm63xx_sprom);
-
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
projects / openwrt.git / commitdiff