Combined the nslu2 net driver patches, based on new nslu2-linux patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10165 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch b/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch
new file mode 100644 (file)
index 0000000..d4c710c
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch
@@ -0,0 +1,88 @@
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c      2008-01-08 15:28:13.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c   2008-01-08 15:28:32.000000000 +1030
+@@ -24,6 +24,7 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+ #include <asm/mach/time.h>
++#include <asm/io.h>
+ 
+ static struct flash_platform_data nslu2_flash_data = {
+       .map_name               = "cfi_probe",
+@@ -140,6 +141,23 @@
+       .resource               = nslu2_uart_resources,
+ };
+ 
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info nslu2_plat_eth[] = {
++      {
++              .phy            = 1,
++              .rxq            = 3,
++              .txreadyq       = 20,
++      }
++};
++
++static struct platform_device nslu2_eth[] = {
++      {
++              .name                   = "ixp4xx_eth",
++              .id                     = IXP4XX_ETH_NPEB,
++              .dev.platform_data      = nslu2_plat_eth,
++      }
++};
++
+ static struct platform_device *nslu2_devices[] __initdata = {
+       &nslu2_i2c_gpio,
+       &nslu2_flash,
+@@ -147,6 +165,7 @@
+ #ifdef CONFIG_LEDS_IXP4XX
+       &nslu2_leds,
+ #endif
++      &nslu2_eth[0],
+ };
+ 
+ static void nslu2_power_off(void)
+@@ -175,6 +194,9 @@
+ 
+ static void __init nslu2_init(void)
+ {
++      uint8_t __iomem *f;
++      int i;
++
+       ixp4xx_sys_init();
+ 
+       nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+@@ -191,6 +213,33 @@
+       (void)platform_device_register(&nslu2_uart);
+ 
+       platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
++
++
++      /*
++       * Map in a portion of the flash and read the MAC address.
++       * Since it is stored in BE in the flash itself, we need to
++       * byteswap it if we're in LE mode.
++       */
++      if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
++#ifdef __ARMEB__
++              for (i = 0; i < 6; i++) {
++                      nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
++              }
++#else
++              nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
++              nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
++              nslu2_plat_eth[0].hwaddr[2] = readb(f + 0x3FFB0 + 1);
++              nslu2_plat_eth[0].hwaddr[3] = readb(f + 0x3FFB0 + 0);
++              nslu2_plat_eth[0].hwaddr[4] = readb(f + 0x3FFB0 + 7);
++              nslu2_plat_eth[0].hwaddr[5] = readb(f + 0x3FFB0 + 6);
++#endif
++              iounmap(f);
++      }
++      printk(KERN_INFO "NSLU2: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
++             nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
++             nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
++             nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
++
+ }
+ 
+ MACHINE_START(NSLU2, "Linksys NSLU2")

diff --git a/target/linux/ixp4xx/patches-2.6.23/051-nslu2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/051-nslu2_mac_plat_info.patch
deleted file mode 100644 (file)
index f6b9a38..0000000
--- a/target/linux/ixp4xx/patches-2.6.23/051-nslu2_mac_plat_info.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
-index 77277d2..e0d0dde 100644
---- a/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -140,6 +140,23 @@ static struct platform_device nslu2_uart = {
-       .resource               = nslu2_uart_resources,
- };
- 
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info nslu2_plat_eth[] = {
-+      {
-+              .phy            = 1,
-+              .rxq            = 3,
-+              .txreadyq       = 20,
-+      }
-+};
-+
-+static struct platform_device nslu2_eth[] = {
-+      {
-+              .name                   = "ixp4xx_eth",
-+              .id                     = IXP4XX_ETH_NPEB,
-+              .dev.platform_data      = nslu2_plat_eth,
-+      }
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
-       &nslu2_i2c_gpio,
-       &nslu2_flash,
-@@ -147,6 +164,7 @@ static struct platform_device *nslu2_devices[] __initdata = {
- #ifdef CONFIG_LEDS_IXP4XX
-       &nslu2_leds,
- #endif
-+      &nslu2_eth[0],
- };
- 
- static void nslu2_power_off(void)

diff --git a/target/linux/ixp4xx/patches-2.6.23/066-nslu2_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.23/066-nslu2_fetch_mac.patch
deleted file mode 100644 (file)
index 93f3c2e..0000000
--- a/target/linux/ixp4xx/patches-2.6.23/066-nslu2_fetch_mac.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.23.11-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.23.11-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c      2007-12-29 01:46:05.000000000 -0600
-+++ linux-2.6.23.11-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c   2007-12-29 12:21:29.000000000 -0600
-@@ -24,6 +24,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/mach/time.h>
-+#include <asm/io.h>
- 
- static struct flash_platform_data nslu2_flash_data = {
-       .map_name               = "cfi_probe",
-@@ -193,6 +194,9 @@
- 
- static void __init nslu2_init(void)
- {
-+      uint8_t __iomem *f;
-+      int i;
-+
-       ixp4xx_sys_init();
- 
-       nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -209,6 +213,33 @@
-       (void)platform_device_register(&nslu2_uart);
- 
-       platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+
-+
-+      /*
-+       * Map in a portion of the flash and read the MAC address.
-+       * Since it is stored in BE in the flash itself, we need to
-+       * byteswap it if we're in LE mode.
-+       */
-+      if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
-+#ifdef __ARMEB__
-+              for (i = 0; i < 6; i++) {
-+                      nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-+              }
-+#else
-+              nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
-+              nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
-+              nslu2_plat_eth[0].hwaddr[2] = readb(f + 0x3FFB0 + 1);
-+              nslu2_plat_eth[0].hwaddr[3] = readb(f + 0x3FFB0 + 0);
-+              nslu2_plat_eth[0].hwaddr[4] = readb(f + 0x3FFB0 + 7);
-+              nslu2_plat_eth[0].hwaddr[5] = readb(f + 0x3FFB0 + 6);
-+#endif
-+              iounmap(f);
-+      }
-+      printk(KERN_INFO "NSLU2: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+             nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
-+             nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
-+             nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
-+
- }
- 
- MACHINE_START(NSLU2, "Linksys NSLU2")