Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-01 21:16:15.000000000 +0100
-@@ -0,0 +1,378 @@
++++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-02 20:57:13.000000000 +0100
+@@ -0,0 +1,481 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon Power Management Unit driver
+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
++struct pmu1_plltab_entry {
++ u16 freq; /* Crystal frequency in kHz.*/
++ u8 xf; /* Crystal frequency value for PMU control */
++ u8 ndiv_int;
++ u32 ndiv_frac;
++ u8 p1div;
++ u8 p2div;
++};
++
++static const struct pmu1_plltab_entry pmu1_plltab[] = {
++ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, },
++ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, },
++ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, },
++ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, },
++ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, },
++ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, },
++ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, },
++ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, },
++ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, },
++ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, },
++ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, },
++ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
++ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, },
++ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, },
++ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, },
++};
++
++#define SSB_PMU1_DEFAULT_XTALFREQ 15360
++
++static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
++{
++ const struct pmu1_plltab_entry *e;
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
++ e = &pmu1_plltab[i];
++ if (e->freq == crystalfreq)
++ return e;
++ }
++
++ return NULL;
++}
++
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
+ u32 crystalfreq)
+{
-+ WARN_ON(1);
++ struct ssb_bus *bus = cc->dev->bus;
++ const struct pmu1_plltab_entry *e = NULL;
++ u32 buffer_strength = 0;
++ u32 tmp, pllctl, pmuctl;
++ unsigned int i;
++
++ if (bus->chip_id == 0x4312) {
++ /* We do not touch the BCM4312 PLL and assume
++ * the default crystal settings work out-of-the-box. */
++ cc->pmu.crystalfreq = 20000;
++ return;
++ }
++
++ if (crystalfreq)
++ e = pmu1_plltab_find_entry(crystalfreq);
++ if (!e)
++ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
++ BUG_ON(!e);
++ crystalfreq = e->freq;
++ cc->pmu.crystalfreq = e->freq;
++
++ /* Check if the PLL already is programmed to this frequency. */
++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
++ /* We're already there... */
++ return;
++ }
++
++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
++ (crystalfreq / 1000), (crystalfreq % 1000));
++
++WARN_ON(1); //TODO not fully implemented, yet.
++return;
++ /* First turn the PLL off. */
++ switch (bus->chip_id) {
++ case 0x4325:
++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
++ ~((1 << SSB_PLLRES_4325_BBPLL_PWRSW_PU) |
++ (1 << SSB_PLLRES_4325_HT_AVAIL)));
++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
++ ~((1 << SSB_PLLRES_4325_BBPLL_PWRSW_PU) |
++ (1 << SSB_PLLRES_4325_HT_AVAIL)));
++ /* Adjust the BBPLL to 2 on all channels later. */
++ buffer_strength = 0x222222;
++ break;
++ default:
++ SSB_WARN_ON(1);
++ }
++ for (i = 1500; i; i--) {
++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
++ break;
++ udelay(10);
++ }
++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
++
++ /* Set p1div and p2div. */
++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
++ //TODO
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
++
+ //TODO
+}
+
+ struct ssb_bus *bus = cc->dev->bus;
+ u32 pmucap;
+
-+if (bus->chip_id != 0x5354) return; //FIXME currently only 5354 code implemented.
-+
+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+ return;
+
projects / openwrt.git / commitdiff