depends on EXPERIMENTAL
default n
-choice
- prompt "Bus selection"
- default MADWIFI_BUS_DEFAULT
- help
- This option controls how MadWifi communicates with the hardware.
-
-config MADWIFI_BUS_DEFAULT
- bool "Use default bus"
- help
- This makes MadWifi determine the needed bus based on the target
- hardware. This will generally work most of the time, but there are some
- cases where you need to override it.
-
-config MADWIFI_BUS_PCI
- bool "Use PCI bus"
- depends on PCI_SUPPORT
-
-config MADWIFI_BUS_AHB
- bool "Use AHB bus"
- depends on TARGET_atheros
-
-endchoice
-
-choice
- prompt "HAL selection"
- default MADWIFI_HAL_DEFAULT
- help
- This option controls how MadWifi communicates with the hardware.
-
-config MADWIFI_HAL_DEFAULT
- bool "Use default HAL"
- help
- This makes MadWifi determine the needed HAL based on the target
- hardware. This will generally work most of the time, but there are some
- cases where you need to override it.
-
-config MADWIFI_HAL_MIPS_BE_ELF
- bool "Use MIPS big endian ELF HAL"
- depends on mips
- depends on BIG_ENDIAN
-
-config MADWIFI_HAL_MIPS_LE_ELF
- bool "Use MIPS little endian ELF HAL"
- depends on mips
- depends on !BIG_ENDIAN
-
-config MADWIFI_HAL_I386_ELF
- bool "Use i386 ELF HAL"
- depends on TARGET_x86
-
-config MADWIFI_HAL_XSCALE_BE_ELF
- bool "Use XScale big endian ELF HAL"
- depends TARGET_ixp4xx
- depends on BIG_ENDIAN
-
-config MADWIFI_HAL_XSCALE_LE_ELF
- bool "Use XScale little endian ELF HAL"
- depends TARGET_iop32x
- depends on !BIG_ENDIAN
-
-config MADWIFI_HAL_ARMV4_LE_ELF
- bool "Use ARMV4 little endian ELF HAL"
- depends TARGET_storm
- depends on !BIG_ENDIAN
-
-config MADWIFI_HAL_AP30
- bool "Use AP30 HAL"
- depends on TARGET_atheros
-
-config MADWIFI_HAL_AP43
- bool "Use AP43 HAL"
- depends on TARGET_atheros
-
-config MADWIFI_HAL_AP51
- bool "Use AP51 HAL"
- depends on TARGET_atheros
-
-config MADWIFI_HAL_AP61
- bool "Use AP61 HAL"
- depends on TARGET_atheros
-
endchoice
choice
include $(INCLUDE_DIR)/package.mk
-ifdef CONFIG_MADWIFI_BUS_DEFAULT
- ifneq ($(CONFIG_TARGET_atheros),)
- BUS:=AHB
- else
- ifneq ($(CONFIG_PCI_SUPPORT),)
- BUS:=PCI
- endif
- endif
-
- # XXX: remove this check later when we have PCI support properly detected on all targets
- ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
- BUS:=
- endif
+ifneq ($(CONFIG_TARGET_atheros),)
+ BUS:=AHB
else
- ifdef CONFIG_MADWIFI_BUS_PCI
+ ifneq ($(CONFIG_PCI_SUPPORT),)
BUS:=PCI
- else
- ifdef CONFIG_MADWIFI_BUS_AHB
- BUS:=AHB
- endif
endif
endif
-ifdef CONFIG_MADWIFI_HAL_DEFAULT
- ifeq ($(ARCH),mips)
- HAL_TARGET:=mips-be-elf
- endif
- ifeq ($(ARCH),mipsel)
- HAL_TARGET:=mips-le-elf
- endif
- ifeq ($(ARCH),i386)
- HAL_TARGET:=i386-elf
- endif
- ifeq ($(ARCH),i686)
- HAL_TARGET:=i386-elf
- endif
- ifeq ($(BOARD),ixp4xx)
- HAL_TARGET:=xscale-be-elf
- endif
- ifeq ($(BOARD),iop32x)
- HAL_TARGET:=xscale-le-elf
- endif
- ifeq ($(ARCH),powerpc)
- HAL_TARGET:=powerpc-be-elf
- endif
- ifeq ($(BOARD),storm)
- HAL_TARGET:=armv4-le-elf
- endif
- ifneq ($(CONFIG_TARGET_atheros),)
- HAL_TARGET:=ap51
- endif
-else
- ifdef CONFIG_MADWIFI_HAL_MIPS_BE_ELF
- HAL_TARGET:=mips-be-elf
- endif
-
- ifdef CONFIG_MADWIFI_HAL_MIPS_LE_ELF
- HAL_TARGET:=mips-le-elf
- endif
-
- ifdef CONFIG_MADWIFI_HAL_I386_ELF
- HAL_TARGET:=i386-elf
- endif
-
- ifdef CONFIG_MADWIFI_HAL_XSCALE_BE_ELF
- HAL_TARGET:=xscale-be-elf
- endif
-
- ifdef CONFIG_MADWIFI_HAL_XSCALE_LE_ELF
- HAL_TARGET:=xscale-le-elf
- endif
-
- ifdef CONFIG_MADWIFI_HAL_ARMV4_LE_ELF
- HAL_TARGET:=armv4-le-elf
- endif
-
- ifdef CONFIG_MADWIFI_HAL_AP30
- HAL_TARGET:=ap30
- endif
-
- ifdef CONFIG_MADWIFI_HAL_AP43
- HAL_TARGET:=ap43
- endif
-
- ifdef CONFIG_MADWIFI_HAL_AP51
- HAL_TARGET:=ap51
- endif
-
- ifdef CONFIG_MADWIFI_HAL_AP61
- HAL_TARGET:=ap61
- endif
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
+ BUS:=
+endif
+ifeq ($(ARCH),mips)
+ HAL_TARGET:=mips-be-elf
+endif
+ifeq ($(ARCH),mipsel)
+ HAL_TARGET:=mips-le-elf
+endif
+ifeq ($(ARCH),i386)
+ HAL_TARGET:=i386-elf
+endif
+ifeq ($(ARCH),i686)
+ HAL_TARGET:=i386-elf
+endif
+ifeq ($(BOARD),ixp4xx)
+ HAL_TARGET:=xscale-be-elf
+endif
+ifeq ($(BOARD),iop32x)
+ HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(ARCH),powerpc)
+ HAL_TARGET:=powerpc-be-elf
+endif
+ifeq ($(BOARD),storm)
+ HAL_TARGET:=armv4-le-elf
+endif
+ifneq ($(CONFIG_TARGET_atheros),)
+ HAL_TARGET:=wisoc
endif
ifdef CONFIG_MADWIFI_RCA_MINSTREL
ATH_RATE="ath_rate/$(RATE_CONTROL)" \
WARNINGS="-Wno-unused" \
$(if $(CONFIG_MADWIFI_DEBUG),,DEBUG="") \
- DOMULTI=1
+ DO_MULTI=1
MAKE_VARS:= \
- COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
+ COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
ifneq ($(HALFILE),)
tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
$(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
rm -rf $(PKG_BUILD_DIR)/tmp
+ # patch cflags
+ $(SED) 's, -E[LB],,' \
+ -e 's, -mapcs-32,,' \
+ $(PKG_BUILD_DIR)/hal/public/*.inc
+ $(SED) 's,march=armv4,march=armv5te,' \
+ $(PKG_BUILD_DIR)/hal/public/xscale*.inc
endef
endif
+++ /dev/null
-Index: madwifi-trunk-r3314/hal/public/mips-be-elf.inc
-===================================================================
---- madwifi-trunk-r3314.orig/hal/public/mips-be-elf.inc 2008-02-20 18:10:46.339155111 +0100
-+++ madwifi-trunk-r3314/hal/public/mips-be-elf.inc 2008-02-20 18:10:46.439160810 +0100
-@@ -71,5 +71,5 @@
-
- LDOPTS= -EB
- COPTS+= -DAH_BYTE_ORDER=AH_BIG_ENDIAN
--COPTS+= -G 0 -EB -mno-abicalls -fno-pic -mips2 -Wa,--trap \
-+COPTS+= -G 0 -mno-abicalls -fno-pic -mips32 -Wa,--trap \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -mlong-calls
-Index: madwifi-trunk-r3314/hal/public/mips-le-elf.inc
-===================================================================
---- madwifi-trunk-r3314.orig/hal/public/mips-le-elf.inc 2008-02-20 18:10:46.347155567 +0100
-+++ madwifi-trunk-r3314/hal/public/mips-le-elf.inc 2008-02-20 18:10:46.443161036 +0100
-@@ -68,5 +68,5 @@
-
- LDOPTS= -EL
- COPTS+= -DAH_BYTE_ORDER=AH_LITTLE_ENDIAN
--COPTS+= -G 0 -EL -mno-abicalls -fno-pic -mips2 -Wa,--trap \
-+COPTS+= -G 0 -mno-abicalls -fno-pic -mips32 -Wa,--trap \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -mlong-calls
-Index: madwifi-trunk-r3314/hal/public/xscale-be-elf.inc
-===================================================================
---- madwifi-trunk-r3314.orig/hal/public/xscale-be-elf.inc 2008-02-20 18:10:46.351155793 +0100
-+++ madwifi-trunk-r3314/hal/public/xscale-be-elf.inc 2008-02-20 18:10:46.451161492 +0100
-@@ -77,5 +77,5 @@
-
- LDOPTS= -EB
- COPTS+= -DAH_BYTE_ORDER=AH_BIG_ENDIAN
--COPTS+= -march=armv4 -mbig-endian -fno-strict-aliasing -fno-common -mapcs-32 \
-+COPTS+= -march=armv5te -mbig-endian -fno-strict-aliasing -fno-common \
- -mtune=xscale -mshort-load-bytes
-Index: madwifi-trunk-r3314/hal/public/xscale-le-elf.inc
-===================================================================
---- madwifi-trunk-r3314.orig/hal/public/xscale-le-elf.inc 2008-02-20 18:10:46.363156477 +0100
-+++ madwifi-trunk-r3314/hal/public/xscale-le-elf.inc 2008-02-20 18:10:46.455161721 +0100
-@@ -79,4 +79,4 @@
- LDOPTS= -EL
- COPTS+= -DAH_BYTE_ORDER=AH_LITTLE_ENDIAN
- COPTS+= -march=armv4 -mlittle-endian -fno-strict-aliasing -fno-common \
-- -mapcs-32 -mtune=xscale -mshort-load-bytes
-+ -mtune=xscale -mshort-load-bytes
+++ /dev/null
-Index: madwifi-trunk-r3314/ath/if_ath.c
-===================================================================
---- madwifi-trunk-r3314.orig/ath/if_ath.c 2008-03-07 00:38:26.748463672 +0100
-+++ madwifi-trunk-r3314/ath/if_ath.c 2008-03-07 00:38:51.285861974 +0100
-@@ -6753,8 +6753,9 @@
- dev->quota -= processed;
- #endif
-
-- /* rx signal state monitoring */
-- ath_hal_rxmonitor(ah, &sc->sc_halstats, &sc->sc_curchan);
-+ /* rx signal state monitoring, only necessary/applicable for sta mode */
-+ if (sc->sc_opmode == HAL_M_STA)
-+ ath_hal_rxmonitor(ah, &sc->sc_halstats, &sc->sc_curchan);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- return processed;
- #else
--- /dev/null
+Index: madwifi-trunk-r3314/ath/if_ath.c
+===================================================================
+--- madwifi-trunk-r3314.orig/ath/if_ath.c 2008-04-09 02:58:41.000000000 +0200
++++ madwifi-trunk-r3314/ath/if_ath.c 2008-04-09 02:59:40.000000000 +0200
+@@ -2479,7 +2479,7 @@
+ */
+ sc->sc_curchan.channel = ic->ic_curchan->ic_freq;
+ sc->sc_curchan.channelFlags = ath_chan2flags(ic->ic_curchan);
+- if (!ath_hal_reset(ah, sc->sc_opmode, &sc->sc_curchan, AH_FALSE, &status)) {
++ if (!ath_hal_reset(ah, sc->sc_opmode, &sc->sc_curchan, AH_TRUE, &status)) {
+ EPRINTF(sc, "unable to reset hardware: '%s' (HAL status %u) "
+ "(freq %u flags 0x%x)\n",
+ ath_get_hal_status_desc(status), status,
+@@ -8865,8 +8865,7 @@
+ * needed to do the reset with chanchange = AH_FALSE in order
+ * to receive traffic when peforming high velocity channel
+ * changes. */
+- if (!ath_hal_reset(ah, sc->sc_opmode, &hchan, AH_TRUE, &status) ||
+- !ath_hal_reset(ah, sc->sc_opmode, &hchan, AH_FALSE, &status)) {
++ if (!ath_hal_reset(ah, sc->sc_opmode, &hchan, AH_TRUE, &status)) {
+ EPRINTF(sc, "Unable to reset channel %u (%u MHz) "
+ "flags 0x%x '%s' (HAL status %u)\n",
+ ieee80211_chan2ieee(ic, chan), chan->ic_freq,
--- /dev/null
+Index: madwifi-trunk-r3314/ath/if_ath_ahb.c
+===================================================================
+--- madwifi-trunk-r3314.orig/ath/if_ath_ahb.c 2008-03-07 11:40:44.967178082 +0100
++++ madwifi-trunk-r3314/ath/if_ath_ahb.c 2008-03-07 11:40:47.763337418 +0100
+@@ -245,6 +245,8 @@
+ num_activesc++;
+ /* Ready to process interrupts */
+
++ sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */
++ sc->aps_sc.sc_ledpin = config->board->sysLedGpio;
+ sc->aps_sc.sc_invalid = 0;
+ return 0;
+
projects / openwrt.git / commitdiff