BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
+++ /dev/null
---- a/arch/avr32/boards/atngw100/setup.c
-+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -118,7 +118,7 @@ static void __init set_hw_addr(struct pl
-
- void __init setup_board(void)
- {
-- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
-+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
- at32_setup_serial_console(0);
- }
-
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extda
- void __init setup_board(void)
- {
- #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
-+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
- #else
-- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- /* USART 2/unused: expansion connector */
-- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
-+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-
- at32_setup_serial_console(0);
- }
---- a/arch/avr32/boards/atstk1000/atstk1003.c
-+++ b/arch/avr32/boards/atstk1000/atstk1003.c
-@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extda
- void __init setup_board(void)
- {
- #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
-+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
- #else
-- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- /* USART 2/unused: expansion connector */
-- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
-+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-
- at32_setup_serial_console(0);
- }
---- a/arch/avr32/boards/atstk1000/atstk1004.c
-+++ b/arch/avr32/boards/atstk1000/atstk1004.c
-@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extda
- void __init setup_board(void)
- {
- #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
-+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
- #else
-- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
- #endif
- /* USART 2/unused: expansion connector */
-- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
-+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-
- at32_setup_serial_console(0);
- }
---- a/arch/avr32/boards/favr-32/setup.c
-+++ b/arch/avr32/boards/favr-32/setup.c
-@@ -250,7 +250,7 @@ static void __init favr32_setup_atmel_pw
-
- void __init setup_board(void)
- {
-- at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */
-+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */
- at32_setup_serial_console(0);
- }
-
---- a/arch/avr32/boards/hammerhead/setup.c
-+++ b/arch/avr32/boards/hammerhead/setup.c
-@@ -165,7 +165,7 @@ static void __init set_hw_addr(struct pl
-
- void __init setup_board(void)
- {
-- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
-+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
- at32_setup_serial_console(0);
- }
-
---- a/arch/avr32/boards/merisc/setup.c
-+++ b/arch/avr32/boards/merisc/setup.c
-@@ -231,9 +231,9 @@ static void detect_merisc_board_id(void)
-
- void __init setup_board(void)
- {
-- at32_map_usart(0, 0, 0);
-- at32_map_usart(1, 1, 0);
-- at32_map_usart(3, 3, 0);
-+ at32_map_usart(0, 0);
-+ at32_map_usart(1, 1);
-+ at32_map_usart(3, 3);
- at32_setup_serial_console(1);
- }
-
-@@ -248,7 +248,7 @@ static int __init merisc_init(void)
- at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
-
- if (merisc_board_id >= 1)
-- at32_map_usart(2, 2, 0);
-+ at32_map_usart(2, 2);
-
- at32_add_device_usart(0);
- at32_add_device_usart(1);
---- a/arch/avr32/boards/mimc200/setup.c
-+++ b/arch/avr32/boards/mimc200/setup.c
-@@ -175,10 +175,10 @@ static void __init set_hw_addr(struct pl
-
- void __init setup_board(void)
- {
-- at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
-- at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */
-- at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */
-- at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
-+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
-+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */
-+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */
-+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
- }
-
- static struct i2c_gpio_platform_data i2c_gpio_data = {
---- a/arch/avr32/mach-at32ap/at32ap700x.c
-+++ b/arch/avr32/mach-at32ap/at32ap700x.c
-@@ -966,68 +966,56 @@ static struct resource atmel_usart3_reso
- DEFINE_DEV_DATA(atmel_usart, 3);
- DEV_CLK(usart, atmel_usart3, pba, 6);
-
--static inline void configure_usart0_pins(int flags)
-+static inline void configure_usart0_pins(void)
- {
- u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
-- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6);
-- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7);
-- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10);
-
- select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
-
--static inline void configure_usart1_pins(int flags)
-+static inline void configure_usart1_pins(void)
- {
- u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
-- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19);
-- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20);
-- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16);
-
- select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
- }
-
--static inline void configure_usart2_pins(int flags)
-+static inline void configure_usart2_pins(void)
- {
- u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
-- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30);
-- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29);
-- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28);
-
- select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
-
--static inline void configure_usart3_pins(int flags)
-+static inline void configure_usart3_pins(void)
- {
- u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
-- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16);
-- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15);
-- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19);
-
- select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
- }
-
- static struct platform_device *__initdata at32_usarts[4];
-
--void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
-+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
- {
- struct platform_device *pdev;
-
- switch (hw_id) {
- case 0:
- pdev = &atmel_usart0_device;
-- configure_usart0_pins(flags);
-+ configure_usart0_pins();
- break;
- case 1:
- pdev = &atmel_usart1_device;
-- configure_usart1_pins(flags);
-+ configure_usart1_pins();
- break;
- case 2:
- pdev = &atmel_usart2_device;
-- configure_usart2_pins(flags);
-+ configure_usart2_pins();
- break;
- case 3:
- pdev = &atmel_usart3_device;
-- configure_usart3_pins(flags);
-+ configure_usart3_pins();
- break;
- default:
- return;
---- a/arch/avr32/mach-at32ap/include/mach/board.h
-+++ b/arch/avr32/mach-at32ap/include/mach/board.h
-@@ -26,17 +26,12 @@ static inline void __deprecated at32_add
- #define ATMEL_MAX_UART 4
- extern struct platform_device *atmel_default_console_device;
-
--/* Flags for selecting USART extra pins */
--#define ATMEL_USART_RTS 0x01
--#define ATMEL_USART_CTS 0x02
--#define ATMEL_USART_CLK 0x03
--
- struct atmel_uart_data {
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virtual base address, if any */
- };
--void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
-+void at32_map_usart(unsigned int hw_id, unsigned int line);
- struct platform_device *at32_add_device_usart(unsigned int id);
-
- struct eth_platform_data {
--- /dev/null
+Fix clash in ATMEL_USART_ flags
+
+At the moment ATMEL_USART_{RTS,CTS,CLK} have the values
+1, 2 and 3 respectively. Given these are used in bitmasks,
+trying to turn on the CLK line will in fact turn on the
+RTS and CTS lines as well.
+
+Change the value of ATMEL_USART_CLK to 4.
+
+Signed-off-by: Ben Nizette <bn@niasdigital.com>
+---
+--- a/arch/avr32/mach-at32ap/include/mach/board.h
++++ b/arch/avr32/mach-at32ap/include/mach/board.h
+@@ -29,7 +29,7 @@ extern struct platform_device *atmel_def
+ /* Flags for selecting USART extra pins */
+ #define ATMEL_USART_RTS 0x01
+ #define ATMEL_USART_CTS 0x02
+-#define ATMEL_USART_CLK 0x03
++#define ATMEL_USART_CLK 0x04
+
+ struct atmel_uart_data {
+ short use_dma_tx; /* use transmit DMA? */
BOARDNAME:=Cobalt Microservers
FEATURES:=tgz pci
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
BOARD:=etrax
BOARDNAME:=Foxboard (ETRAX 100LX)
FEATURES:=squashfs jffs2
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
DEVICE_TYPE=
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
.globl __kuser_helper_start
__kuser_helper_start:
-@@ -821,7 +822,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
- #endif
+@@ -818,7 +819,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
+ smp_dmb
usr_ret lr
- .align 5
/*
* Reference prototype:
-@@ -953,7 +954,7 @@ kuser_cmpxchg_fixup:
+@@ -950,7 +951,7 @@ kuser_cmpxchg_fixup:
#endif
/*
* Reference prototype:
-@@ -1035,7 +1036,7 @@ __kuser_helper_end:
+@@ -1032,7 +1033,7 @@ __kuser_helper_end:
* of which is copied into r0 for the mode specific abort handler.
*/
.macro vector_stub, name, mode, correction=0
vector_\name:
.if \correction
-@@ -1160,7 +1161,7 @@ __stubs_start:
+@@ -1157,7 +1158,7 @@ __stubs_start:
.long __und_invalid @ e
.long __und_invalid @ f
/*=============================================================================
* Undefined FIQs
-@@ -1190,7 +1191,7 @@ vector_addrexcptn:
+@@ -1187,7 +1188,7 @@ vector_addrexcptn:
* We group all the following data together to optimise
* for CPUs with separate I & D caches.
*/
+#endif /* __MACH_GMAC_H__ */
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
-@@ -72,4 +72,12 @@
+@@ -71,4 +71,12 @@
*/
#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
+++ /dev/null
---- a/drivers/net/r8169.c
-+++ b/drivers/net/r8169.c
-@@ -1890,7 +1890,7 @@ static const struct rtl_cfg_info {
- .hw_start = rtl_hw_start_8169,
- .region = 1,
- .align = 0,
-- .intr_event = SYSErr | LinkChg | RxOverflow |
-+ .intr_event = LinkChg | RxOverflow |
- RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
- .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
- .features = RTL_FEATURE_GMII
-@@ -1899,7 +1899,7 @@ static const struct rtl_cfg_info {
- .hw_start = rtl_hw_start_8168,
- .region = 2,
- .align = 8,
-- .intr_event = SYSErr | LinkChg | RxOverflow |
-+ .intr_event = LinkChg | RxOverflow |
- TxErr | TxOK | RxOK | RxErr,
- .napi_event = TxErr | TxOK | RxOK | RxOverflow,
- .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI
-@@ -1908,7 +1908,7 @@ static const struct rtl_cfg_info {
- .hw_start = rtl_hw_start_8101,
- .region = 2,
- .align = 8,
-- .intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout |
-+ .intr_event = LinkChg | RxOverflow | PCSTimeout |
- RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
- .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
- .features = RTL_FEATURE_MSI
-@@ -3582,10 +3582,12 @@ static irqreturn_t rtl8169_interrupt(int
- goto out;
- }
-
-+#if 0
- if (unlikely(status & SYSErr)) {
- rtl8169_pcierr_interrupt(dev);
- goto out;
- }
-+#endif
-
- if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
-@@ -96,6 +96,10 @@ config ADM6996_PHY
- config MVSWITCH_PHY
- tristate "Driver for Marvell 88E6060 switches"
+@@ -100,6 +100,10 @@ config IP175C_PHY
+ tristate "Driver for IC+ IP175C/IP178C switches"
+ select SWCONFIG
+config AR8216_PHY
+ tristate "Driver for Atheros AR8216 switches"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
- obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
+ obj-$(CONFIG_IP175C_PHY) += ip175c.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
-@@ -1311,3 +1312,5 @@ MODULE_LICENSE("GPL");
+@@ -1312,3 +1313,5 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
--- a/init/main.c
+++ b/init/main.c
-@@ -812,7 +812,7 @@ static noinline int init_post(void)
+@@ -811,7 +811,7 @@ static noinline int init_post(void)
numa_default_policy();
if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+be done automatically.
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -2495,6 +2495,11 @@ T: git git://git.kernel.org/pub/scm/linu
+@@ -2504,6 +2504,11 @@ T: git git://git.kernel.org/pub/scm/linu
S: Maintained
F: drivers/media/video/gspca/
+++ /dev/null
-From: Nicolas Pitre <nico@cam.org>
-Date: Fri, 22 May 2009 20:53:40 +0000 (-0400)
-Subject: [ARM] add coherent DMA mask for mv643xx_eth
-X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=a49a018a6ea6d73742a81d673fe5ec4a7d2137b3
-
-[ARM] add coherent DMA mask for mv643xx_eth
-
-Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because
-the platform device declaration does not include any coherent DMA mask
-and coherent memory allocations fail.
-
-Signed-off-by: Nicolas Pitre <nico@marvell.com>
----
-
---- a/arch/arm/mach-kirkwood/common.c
-+++ b/arch/arm/mach-kirkwood/common.c
-@@ -144,6 +144,9 @@ static struct platform_device kirkwood_g
- .id = 0,
- .num_resources = 1,
- .resource = kirkwood_ge00_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -202,6 +205,9 @@ static struct platform_device kirkwood_g
- .id = 1,
- .num_resources = 1,
- .resource = kirkwood_ge01_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
---- a/arch/arm/mach-loki/common.c
-+++ b/arch/arm/mach-loki/common.c
-@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 =
- .id = 0,
- .num_resources = 1,
- .resource = loki_ge0_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 =
- .id = 1,
- .num_resources = 1,
- .resource = loki_ge1_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
---- a/arch/arm/mach-mv78xx0/common.c
-+++ b/arch/arm/mach-mv78xx0/common.c
-@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge
- .id = 0,
- .num_resources = 1,
- .resource = mv78xx0_ge00_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge
- .id = 1,
- .num_resources = 1,
- .resource = mv78xx0_ge01_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge
- .id = 2,
- .num_resources = 1,
- .resource = mv78xx0_ge10_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
-@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge
- .id = 3,
- .num_resources = 1,
- .resource = mv78xx0_ge11_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
---- a/arch/arm/mach-orion5x/common.c
-+++ b/arch/arm/mach-orion5x/common.c
-@@ -188,6 +188,9 @@ static struct platform_device orion5x_et
- .id = 0,
- .num_resources = 1,
- .resource = orion5x_eth_resources,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
- };
-
- void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
--- a/init/main.c
+++ b/init/main.c
-@@ -836,10 +836,7 @@ static noinline int init_post(void)
+@@ -835,10 +835,7 @@ static noinline int init_post(void)
printk(KERN_WARNING "Failed to execute %s. Attempting "
"defaults...\n", execute_command);
}
BOARDNAME:=Marvell Kirkwood
FEATURES:=tgz usb
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
-@@ -788,6 +788,38 @@ static void __init kirkwood_l2_init(void
+@@ -786,6 +786,38 @@ static void __init kirkwood_l2_init(void
#endif
}
FEATURES:=squashfs jffs2 pci
CFLAGS:=-Os -pipe -funit-at-a-time
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
--- a/arch/mips/include/asm/compiler.h
+++ b/arch/mips/include/asm/compiler.h
-@@ -16,4 +16,11 @@
- #define GCC_REG_ACCUM "accum"
+@@ -26,4 +26,11 @@ typedef u64 uintx_t;
+ #endif
#endif
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4)
#endif /* _ASM_COMPILER_H */
--- a/arch/mips/include/asm/delay.h
+++ b/arch/mips/include/asm/delay.h
-@@ -83,10 +83,14 @@ static inline void __udelay(unsigned lon
+@@ -67,10 +67,14 @@ static inline unsigned long __usecs_to_l
: "r" (usecs), "r" (lpj)
: GCC_REG_ACCUM);
else if (sizeof(long) == 8 && !R4000_WAR)
BOARDNAME:=Mikrotik RouterBoard 532
FEATURES:=jffs2 pci tgz
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += hostapd-mini kmod-madwifi
FEATURES:=jffs2
CFLAGS:=-O2 -pipe -march=armv4t -mtune=arm920t -funit-at-a-time
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
DEVICE_TYPE=phone
-diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/video/console/fbcon.c
---- linux-2.6.29.orig/drivers/video/console/fbcon.c 2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/console/fbcon.c 2009-05-15 01:45:36.000000000 +0200
-@@ -562,7 +562,7 @@
+--- a/drivers/video/console/fbcon.c
++++ b/drivers/video/console/fbcon.c
+@@ -562,7 +562,7 @@ static void fbcon_prepare_logo(struct vc
/* Need to make room for the logo */
struct fbcon_ops *ops = info->fbcon_par;
int cnt, erase = vc->vc_video_erase_char, step;
int logo_height;
if (info->flags & FBINFO_MODULE) {
-@@ -581,37 +581,18 @@
+@@ -581,37 +581,18 @@ static void fbcon_prepare_logo(struct vc
q = (unsigned short *) (vc->vc_origin +
vc->vc_size_row * rows);
step = logo_lines * cols;
scr_memsetw((unsigned short *) vc->vc_origin,
erase,
vc->vc_size_row * logo_lines);
-@@ -621,16 +602,6 @@
+@@ -621,16 +602,6 @@ static void fbcon_prepare_logo(struct vc
update_screen(vc);
}
-diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/video/logo/Kconfig
---- linux-2.6.29.orig/drivers/video/logo/Kconfig 2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/logo/Kconfig 2009-05-14 22:28:50.000000000 +0200
-@@ -82,4 +82,8 @@
+--- a/drivers/video/logo/Kconfig
++++ b/drivers/video/logo/Kconfig
+@@ -82,4 +82,8 @@ config LOGO_M32R_CLUT224
depends on M32R
default y
+ default y
+
endif # LOGO
-diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video/logo/logo.c
---- linux-2.6.29.orig/drivers/video/logo/logo.c 2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/logo/logo.c 2009-05-14 22:37:05.000000000 +0200
-@@ -35,6 +35,7 @@
+--- a/drivers/video/logo/logo.c
++++ b/drivers/video/logo/logo.c
+@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe
extern const struct linux_logo logo_superh_vga16;
extern const struct linux_logo logo_superh_clut224;
extern const struct linux_logo logo_m32r_clut224;
static int nologo;
module_param(nologo, bool, 0);
-@@ -115,6 +116,10 @@
+@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f
/* M32R Linux logo */
logo = &logo_m32r_clut224;
#endif
}
return logo;
}
-diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm
---- linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm 2009-05-15 09:54:13.000000000 +0200
+--- /dev/null
++++ b/drivers/video/logo/logo_openwrt_clut224.ppm
@@ -0,0 +1,38403 @@
+P3
+480 480
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-diff -ruN linux-2.6.29.orig/drivers/video/logo/Makefile linux-2.6.29/drivers/video/logo/Makefile
---- linux-2.6.29.orig/drivers/video/logo/Makefile 2009-05-14 22:21:12.000000000 +0200
-+++ linux-2.6.29/drivers/video/logo/Makefile 2009-05-14 22:35:42.000000000 +0200
-@@ -15,6 +15,7 @@
+--- a/drivers/video/logo/Makefile
++++ b/drivers/video/logo/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_
obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
-@@ -882,7 +882,7 @@ static struct uart_ops s3c24xx_serial_op
+@@ -878,7 +878,7 @@ static struct uart_ops s3c24xx_serial_op
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
FEATURES:=fpu
CFLAGS:=-Os -pipe -march=sb1 -funit-at-a-time
-LINUX_VERSION:=2.6.30-rc7
+LINUX_VERSION:=2.6.30-rc8
include $(INCLUDE_DIR)/target.mk
projects / openwrt.git / commitdiff