PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c
PATCH_DIR:=./patches-old
else
- PKG_VERSION:=2009-03-31
- PKG_RELEASE:=2
+ PKG_VERSION:=2009-05-01
+ PKG_RELEASE:=1
PKG_SOURCE_URL:= \
- http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \
+ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/05 \
http://wireless.kernel.org/download/compat-wireless-2.6
- PKG_MD5SUM:=b5b2159081c36dd6c318a28eddf7e646
+ PKG_MD5SUM:=abc949ec3f7cc57302cca814d9b9c6cd
endif
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
AUTOLOAD:=$(call AutoLoad,60,zd1211rw)
endef
+
+define KernelPackage/ath
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros common driver part
+ DEPENDS+= @PCI_SUPPORT +kmod-mac80211
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,26,ath)
+endef
+
+define KernelPackage/ath/description
+ This module contains some common parts needed by Atheros Wireless drivers.
+endef
+
define KernelPackage/ath5k
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 5xxx wireless cards support
URL:=http://linuxwireless.org/en/users/Drivers/ath5k
- DEPENDS+= @PCI_SUPPORT +kmod-mac80211
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath5k/ath5k.$(LINUX_KMOD_SUFFIX)
+ DEPENDS+= +kmod-ath
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,ath5k)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11n wireless cards support
URL:=http://linuxwireless.org/en/users/Drivers/ath9k
- DEPENDS+= @PCI_SUPPORT +kmod-mac80211 @!LINUX_2_6_21||!LINUX_2_6_23||!LINUX_2_6_24||!LINUX_2_6_25||!LINUX_2_6_26
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
+ DEPENDS+= +kmod-ath @!LINUX_2_6_21||!LINUX_2_6_23||!LINUX_2_6_24||!LINUX_2_6_25||!LINUX_2_6_26
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,ath9k)
endef
$(if $(CONFIG_PCI),-DCONFIG_SSB_SPROM) \
$(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS) \
$(if $(CONFIG_RFKILL),-DCONFIG_B43_RFKILL -DCONFIG_B43LEGACY_RFKILL) \
- $(if $(CONFIG_HW_RANDOM),-DCONFIG_B43_HWRNG) \
+ $(if $(CONFIG_HW_RANDOM),-DCONFIG_B43_HWRNG -DCONFIG_B43LEGACY_HWRNG) \
$(if $(CONFIG_PCMCIA),-DCONFIG_SSB_PCMCIAHOST_POSSIBLE -DCONFIG_SSB_PCMCIAHOST -DCONFIG_B43_PCMCIA -DCONFIG_B43_PIO) \
$(if $(CONFIG_DEBUG_FS), -DCONFIG_MAC80211_DEBUGFS) \
-D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
CONFIG_B43LEGACY_LEDS=$(CONFIG_LEDS_TRIGGERS) \
CONFIG_B43_LEDS=$(CONFIG_LEDS_TRIGGERS) \
$(if $(CONFIG_HW_RANDOM),CONFIG_B43_HWRNG=y,CONFIG_B43_HWRNG=n) \
+ $(if $(CONFIG_HW_RANDOM),CONFIG_B43LEGACY_HWRNG=y,CONFIG_B43LEGACY_HWRNG=n) \
$(if $(CONFIG_PACKAGE_kmod-b43),CONFIG_B43=m) \
$(if $(CONFIG_PACKAGE_kmod-b43legacy),CONFIG_B43LEGACY=m) \
KLIB_BUILD="$(LINUX_DIR)" \
$(eval $(call KernelPackage,zd1211rw))
$(eval $(call KernelPackage,mac80211-hwsim))
$(eval $(call KernelPackage,ath9k))
+$(eval $(call KernelPackage,ath))
$(eval $(call KernelPackage,b43))
$(eval $(call KernelPackage,b43legacy))
--- a/config.mk
+++ b/config.mk
-@@ -104,10 +104,10 @@ CONFIG_MAC80211_MESH=y
+@@ -107,10 +107,10 @@ CONFIG_MAC80211_MESH=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG=y
+# CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG=y
- CONFIG_NL80211=y
-@@ -128,54 +128,54 @@ CONFIG_ATH9K=m
+ CONFIG_WIRELESS_OLD_REGULATORY=n
+@@ -127,56 +127,56 @@ CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG=y
-CONFIG_B43=m
+-CONFIG_B43_HWRNG=y
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_LEDS=y
+# CONFIG_B43=m
++# CONFIG_B43_HWRNG=y
+# CONFIG_B43_PCI_AUTOSELECT=y
+# CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA=y
# CONFIG_B43_FORCE_PIO=y
-CONFIG_B43LEGACY=m
+-CONFIG_B43LEGACY_HWRNG=y
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
+# CONFIG_B43LEGACY=m
++# CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+# CONFIG_B43LEGACY_LEDS=y
# CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
-@@ -190,27 +190,27 @@ CONFIG_IPW2200_QOS=y
+@@ -191,27 +191,27 @@ CONFIG_IPW2200_QOS=y
#
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2400PCI=m
-@@ -226,16 +226,16 @@ CONFIG_RT61PCI=m
+@@ -227,16 +227,16 @@ CONFIG_RT61PCI=m
NEED_RT2X00_FIRMWARE=y
endif
# USB Drivers
ifneq ($(CONFIG_USB),)
-@@ -249,21 +249,21 @@ CONFIG_ZD1211RW=m
+@@ -250,21 +250,21 @@ CONFIG_ZD1211RW=m
# is only wireless RNDIS chip known to date.
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
endif
# RT2500USB does not require firmware
-@@ -301,20 +301,20 @@ CONFIG_P54_COMMON=m
+@@ -306,20 +306,20 @@ CONFIG_ATH_COMMON=m
# Sonics Silicon Backplane
+++ /dev/null
-From 9ed8a41a30916a79529552872e8d1a6175d37398 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:30:14 +0100
-Subject: [PATCH 1/9] rt2x00: Move Move pci_dev specific access to rt2x00pci
-
-pci_dev->irq and pci_name(pci_dev) access should be limited
-to rt2x00pci only. This is more generic and allows a rt2x00 pci
-driver to be controlled as PCI device but also as platform driver
-(needed for rt2800pci SoC support).
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
- drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++----
- drivers/net/wireless/rt2x00/rt61pci.c | 7 +------
- drivers/net/wireless/rt2x00/rt61pci.h | 6 ------
- 6 files changed, 33 insertions(+), 18 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
-@@ -1361,7 +1361,7 @@ static int rt2400pci_init_eeprom(struct
- */
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
- rt2x00pci_register_read(rt2x00dev, CSR0, ®);
-- rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
-+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
-
- if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
---- a/drivers/net/wireless/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
-@@ -1525,7 +1525,7 @@ static int rt2500pci_init_eeprom(struct
- */
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
- rt2x00pci_register_read(rt2x00dev, CSR0, ®);
-- rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
-+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
-
- if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
- !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -672,6 +672,12 @@ struct rt2x00_dev {
- unsigned long flags;
-
- /*
-+ * Device information, Bus IRQ and name (PCI, SoC)
-+ */
-+ int irq;
-+ const char *name;
-+
-+ /*
- * Chipset identification.
- */
- struct rt2x00_chip chip;
-@@ -860,6 +866,18 @@ static inline void rt2x00_set_chip(struc
- rt2x00dev->chip.rev = rev;
- }
-
-+static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
-+ const u16 rt)
-+{
-+ rt2x00dev->chip.rt = rt;
-+}
-+
-+static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
-+ const u16 rf, const u32 rev)
-+{
-+ rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
-+}
-+
- static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
- {
- return (chipset->rt == chip);
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
-@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(str
-
- int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
- {
-- struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
- struct data_queue *queue;
- int status;
-
-@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_d
- /*
- * Register interrupt handler.
- */
-- status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
-- IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
-+ status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
-+ IRQF_SHARED, rt2x00dev->name, rt2x00dev);
- if (status) {
- ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
-- pci_dev->irq, status);
-+ rt2x00dev->irq, status);
- goto exit;
- }
-
-@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_
- struct ieee80211_hw *hw;
- struct rt2x00_dev *rt2x00dev;
- int retval;
-+ u16 chip;
-
- retval = pci_request_regions(pci_dev, pci_name(pci_dev));
- if (retval) {
-@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_
- rt2x00dev->dev = &pci_dev->dev;
- rt2x00dev->ops = ops;
- rt2x00dev->hw = hw;
-+ rt2x00dev->irq = pci_dev->irq;
-+ rt2x00dev->name = pci_name(pci_dev);
-+
-+ /*
-+ * Determine RT chipset by reading PCI header.
-+ */
-+ pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
-+ rt2x00_set_chip_rt(rt2x00dev, chip);
-
- retval = rt2x00pci_alloc_reg(rt2x00dev);
- if (retval)
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
-@@ -2308,7 +2308,6 @@ static int rt61pci_init_eeprom(struct rt
- u32 reg;
- u16 value;
- u16 eeprom;
-- u16 device;
-
- /*
- * Read EEPROM word for configuration.
-@@ -2317,14 +2316,10 @@ static int rt61pci_init_eeprom(struct rt
-
- /*
- * Identify RF chipset.
-- * To determine the RT chip we have to read the
-- * PCI header of the device.
- */
-- pci_read_config_word(to_pci_dev(rt2x00dev->dev),
-- PCI_CONFIG_HEADER_DEVICE, &device);
- value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
- rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
-- rt2x00_set_chip(rt2x00dev, device, value, reg);
-+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
-
- if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
- !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
---- a/drivers/net/wireless/rt2x00/rt61pci.h
-+++ b/drivers/net/wireless/rt2x00/rt61pci.h
-@@ -63,12 +63,6 @@
- */
-
- /*
-- * PCI Configuration Header
-- */
--#define PCI_CONFIG_HEADER_VENDOR 0x0000
--#define PCI_CONFIG_HEADER_DEVICE 0x0002
--
--/*
- * HOST_CMD_CSR: For HOST to interrupt embedded processor
- */
- #define HOST_CMD_CSR 0x0008
--- /dev/null
+From ff22aa7443c57f49f9fdaf703aa7035c1b13d7f4 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 26 Apr 2009 15:49:55 +0200
+Subject: [PATCH 1/4] rt2x00: Add rt2x00soc bus module
+
+Add new library module for SoC drivers.
+This is needed to fully support the platform
+driver part of rt2800pci.
+
+Based on original patch from Felix.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/Kconfig | 4 +
+ drivers/net/wireless/rt2x00/Makefile | 1 +
+ drivers/net/wireless/rt2x00/rt2x00soc.c | 159 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00soc.h | 52 ++++++++++
+ 4 files changed, 216 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.c
+ create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.h
+
+--- a/drivers/net/wireless/rt2x00/Makefile
++++ b/drivers/net/wireless/rt2x00/Makefile
+@@ -12,6 +12,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2
+
+ obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
+ obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
++obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
+ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
+ obj-$(CONFIG_RT2400PCI) += rt2400pci.o
+ obj-$(CONFIG_RT2500PCI) += rt2500pci.o
+--- /dev/null
++++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
+@@ -0,0 +1,159 @@
++/*
++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
++ <http://rt2x00.serialmonkey.com>
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the
++ Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++ Module: rt2x00soc
++ Abstract: rt2x00 generic soc device routines.
++ */
++
++#include <linux/bug.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include "rt2x00.h"
++#include "rt2x00soc.h"
++
++static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
++{
++ kfree(rt2x00dev->rf);
++ rt2x00dev->rf = NULL;
++
++ kfree(rt2x00dev->eeprom);
++ rt2x00dev->eeprom = NULL;
++}
++
++static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
++{
++ struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
++ struct resource *res;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENODEV;
++
++ rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
++ if (!rt2x00dev->csr.base)
++ goto exit;
++
++ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
++ if (!rt2x00dev->eeprom)
++ goto exit;
++
++ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
++ if (!rt2x00dev->rf)
++ goto exit;
++
++ return 0;
++
++exit:
++ ERROR_PROBE("Failed to allocate registers.\n");
++ rt2x00soc_free_reg(rt2x00dev);
++
++ return -ENOMEM;
++}
++
++int rt2x00soc_probe(struct platform_device *pdev,
++ const unsigned short chipset,
++ const struct rt2x00_ops *ops)
++{
++ struct ieee80211_hw *hw;
++ struct rt2x00_dev *rt2x00dev;
++ int retval;
++
++ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
++ if (!hw) {
++ ERROR_PROBE("Failed to allocate hardware.\n");
++ return -ENOMEM;
++ }
++
++ platform_set_drvdata(pdev, hw);
++
++ rt2x00dev = hw->priv;
++ rt2x00dev->dev = &pdev->dev;
++ rt2x00dev->ops = ops;
++ rt2x00dev->hw = hw;
++ rt2x00dev->irq = platform_get_irq(pdev, 0);
++ rt2x00dev->name = pdev->dev.driver->name;
++
++ rt2x00_set_chip_rt(rt2x00dev, chipset);
++
++ retval = rt2x00soc_alloc_reg(rt2x00dev);
++ if (retval)
++ goto exit_free_device;
++
++ retval = rt2x00lib_probe_dev(rt2x00dev);
++ if (retval)
++ goto exit_free_reg;
++
++ return 0;
++
++exit_free_reg:
++ rt2x00soc_free_reg(rt2x00dev);
++
++exit_free_device:
++ ieee80211_free_hw(hw);
++
++ return retval;
++}
++
++int rt2x00soc_remove(struct platform_device *pdev)
++{
++ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++
++ /*
++ * Free all allocated data.
++ */
++ rt2x00lib_remove_dev(rt2x00dev);
++ rt2x00soc_free_reg(rt2x00dev);
++ ieee80211_free_hw(hw);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(rt2x00soc_remove);
++
++#ifdef CONFIG_PM
++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++
++ return rt2x00lib_suspend(rt2x00dev, state);
++}
++EXPORT_SYMBOL_GPL(rt2x00soc_suspend);
++
++int rt2x00soc_resume(struct platform_device *pdev)
++{
++ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++
++ return rt2x00lib_resume(rt2x00dev);
++}
++EXPORT_SYMBOL_GPL(rt2x00soc_resume);
++#endif /* CONFIG_PM */
++
++/*
++ * rt2x00soc module information.
++ */
++MODULE_AUTHOR(DRV_PROJECT);
++MODULE_VERSION(DRV_VERSION);
++MODULE_DESCRIPTION("rt2x00 soc library");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
+@@ -0,0 +1,52 @@
++/*
++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
++ <http://rt2x00.serialmonkey.com>
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the
++ Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++ Module: rt2x00soc
++ Abstract: Data structures for the rt2x00soc module.
++ */
++
++#ifndef RT2X00SOC_H
++#define RT2X00SOC_H
++
++#define KSEG1ADDR(__ptr) __ptr
++
++#define __rt2x00soc_probe(__chipset, __ops) \
++static int __rt2x00soc_probe(struct platform_device *pdev) \
++{ \
++ return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
++}
++
++/*
++ * SoC driver handlers.
++ */
++int rt2x00soc_probe(struct platform_device *pdev,
++ const unsigned short chipset,
++ const struct rt2x00_ops *ops);
++int rt2x00soc_remove(struct platform_device *pdev);
++#ifdef CONFIG_PM
++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
++int rt2x00soc_resume(struct platform_device *pdev);
++#else
++#define rt2x00soc_suspend NULL
++#define rt2x00soc_resume NULL
++#endif /* CONFIG_PM */
++
++#endif /* RT2X00SOC_H */
+++ /dev/null
-From 0a807e9fbd915d2c0cc30870403a571478a9191b Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:31:25 +0100
-Subject: [PATCH 2/9] rt2x00: Fix Sparse warning
-
-rt2x00link_reset_qual() is not declared in a header,
-and is only internally used within rt2x00link.c.
-It should be declared as static.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2x00link.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2x00link.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
-@@ -387,7 +387,7 @@ void rt2x00link_reset_tuner(struct rt2x0
- rt2x00link_antenna_reset(rt2x00dev);
- }
-
--void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
-+static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
- {
- struct link_qual *qual = &rt2x00dev->link.qual;
-
+++ /dev/null
-From 76b0fa91af8ca33cd68f52f2d02a05c488777f58 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:32:07 +0100
-Subject: [PATCH 3/9] rt2x00: Don't free register information on suspend
-
-After suspend & resume the rt2x00 devices won't wakeup
-anymore due to a broken register information setup.
-The most important problem is the release of the EEPROM
-buffer which is completely cleared and never read again
-after the suspend.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2x00pci.c | 18 +-----------------
- drivers/net/wireless/rt2x00/rt2x00usb.c | 18 +-----------------
- 2 files changed, 2 insertions(+), 34 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
-@@ -377,8 +377,6 @@ int rt2x00pci_suspend(struct pci_dev *pc
- if (retval)
- return retval;
-
-- rt2x00pci_free_reg(rt2x00dev);
--
- pci_save_state(pci_dev);
- pci_disable_device(pci_dev);
- return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
-@@ -389,7 +387,6 @@ int rt2x00pci_resume(struct pci_dev *pci
- {
- struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
- struct rt2x00_dev *rt2x00dev = hw->priv;
-- int retval;
-
- if (pci_set_power_state(pci_dev, PCI_D0) ||
- pci_enable_device(pci_dev) ||
-@@ -398,20 +395,7 @@ int rt2x00pci_resume(struct pci_dev *pci
- return -EIO;
- }
-
-- retval = rt2x00pci_alloc_reg(rt2x00dev);
-- if (retval)
-- return retval;
--
-- retval = rt2x00lib_resume(rt2x00dev);
-- if (retval)
-- goto exit_free_reg;
--
-- return 0;
--
--exit_free_reg:
-- rt2x00pci_free_reg(rt2x00dev);
--
-- return retval;
-+ return rt2x00lib_resume(rt2x00dev);
- }
- EXPORT_SYMBOL_GPL(rt2x00pci_resume);
- #endif /* CONFIG_PM */
---- a/drivers/net/wireless/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
-@@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interfa
- if (retval)
- return retval;
-
-- rt2x00usb_free_reg(rt2x00dev);
--
- /*
- * Decrease usbdev refcount.
- */
-@@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interfac
- {
- struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
- struct rt2x00_dev *rt2x00dev = hw->priv;
-- int retval;
-
- usb_get_dev(interface_to_usbdev(usb_intf));
-
-- retval = rt2x00usb_alloc_reg(rt2x00dev);
-- if (retval)
-- return retval;
--
-- retval = rt2x00lib_resume(rt2x00dev);
-- if (retval)
-- goto exit_free_reg;
--
-- return 0;
--
--exit_free_reg:
-- rt2x00usb_free_reg(rt2x00dev);
--
-- return retval;
-+ return rt2x00lib_resume(rt2x00dev);
- }
- EXPORT_SYMBOL_GPL(rt2x00usb_resume);
- #endif /* CONFIG_PM */
--- /dev/null
+From 67432230daedc23f808b79173703e27675fd0659 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 26 Apr 2009 15:54:03 +0200
+Subject: [PATCH 2/4] rt2x00: Implement support for rt2800pci
+
+Add support for the rt2800pci chipset.
+
+Includes various patches from Mattias, Mark, Felix and Xose.
+
+Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
+Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
+Signed-off-by: Mark Asselstine <asselsm@gmail.com>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/Kconfig | 26 +
+ drivers/net/wireless/rt2x00/Makefile | 1 +
+ drivers/net/wireless/rt2x00/rt2800pci.c | 3245 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800pci.h | 1927 ++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00.h | 6 +
+ 5 files changed, 5205 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
+ create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
+
+--- a/drivers/net/wireless/rt2x00/Makefile
++++ b/drivers/net/wireless/rt2x00/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u
+ obj-$(CONFIG_RT2400PCI) += rt2400pci.o
+ obj-$(CONFIG_RT2500PCI) += rt2500pci.o
+ obj-$(CONFIG_RT61PCI) += rt61pci.o
++obj-$(CONFIG_RT2800PCI) += rt2800pci.o
+ obj-$(CONFIG_RT2500USB) += rt2500usb.o
+ obj-$(CONFIG_RT73USB) += rt73usb.o
+ obj-$(CONFIG_RT2800USB) += rt2800usb.o
+--- /dev/null
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -0,0 +1,3245 @@
++/*
++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
++ <http://rt2x00.serialmonkey.com>
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the
++ Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++ Module: rt2800pci
++ Abstract: rt2800pci device specific routines.
++ Supported chipsets: RT2800E & RT2800ED.
++ */
++
++#include <linux/crc-ccitt.h>
++#include <linux/delay.h>
++#include <linux/etherdevice.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/eeprom_93cx6.h>
++
++#include "rt2x00.h"
++#include "rt2x00pci.h"
++#include "rt2x00soc.h"
++#include "rt2800pci.h"
++
++#ifdef CONFIG_RT2800PCI_PCI_MODULE
++#define CONFIG_RT2800PCI_PCI
++#endif
++
++#ifdef CONFIG_RT2800PCI_WISOC_MODULE
++#define CONFIG_RT2800PCI_WISOC
++#endif
++
++/*
++ * Allow hardware encryption to be disabled.
++ */
++static int modparam_nohwcrypt = 0;
++module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
++MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
++
++/*
++ * Register access.
++ * BBP and RF register require indirect register access,
++ * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
++ * These indirect registers work with busy bits,
++ * and we will try maximal REGISTER_BUSY_COUNT times to access
++ * the register while taking a REGISTER_BUSY_DELAY us delay
++ * between each attampt. When the busy bit is still set at that time,
++ * the access attempt is considered to have failed,
++ * and we will print an error.
++ */
++#define WAIT_FOR_BBP(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RF(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
++#define WAIT_FOR_MCU(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
++ H2M_MAILBOX_CSR_OWNER, (__reg))
++
++static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, const u8 value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the BBP becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
++ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
++ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
++ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
++
++ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, u8 *value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the BBP becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
++ */
++ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
++ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
++ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
++
++ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
++
++ WAIT_FOR_BBP(rt2x00dev, ®);
++ }
++
++ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, const u8 value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, u8 *value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RFCSR becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
++ */
++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
++
++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++
++ WAIT_FOR_RFCSR(rt2x00dev, ®);
++ }
++
++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
++ const unsigned int word, const u32 value)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RF becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RF(rt2x00dev, ®)) {
++ reg = 0;
++ rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
++ rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
++ rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
++ rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
++
++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
++ rt2x00_rf_write(rt2x00dev, word, value);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
++ const u8 command, const u8 token,
++ const u8 arg0, const u8 arg1)
++{
++ u32 reg;
++
++ /*
++ * RT2880 and RT3052 don't support MCU requests.
++ */
++ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
++ rt2x00_rt(&rt2x00dev->chip, RT3052))
++ return;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the MCU becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_MCU(rt2x00dev, ®)) {
++ rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
++ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
++ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
++ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
++
++ reg = 0;
++ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
++ rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
++ }
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
++{
++ unsigned int i;
++ u32 reg;
++
++ for (i = 0; i < 200; i++) {
++ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®);
++
++ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
++ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
++ break;
++
++ udelay(REGISTER_BUSY_DELAY);
++ }
++
++ if (i == 200)
++ ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
++
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
++}
++
++#ifdef CONFIG_RT2800PCI_WISOC
++static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
++{
++ u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
++
++ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
++}
++#else
++static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
++{
++}
++#endif /* CONFIG_RT2800PCI_WISOC */
++
++#ifdef CONFIG_RT2800PCI_PCI
++static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
++{
++ struct rt2x00_dev *rt2x00dev = eeprom->data;
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
++
++ eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
++ eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
++ eeprom->reg_data_clock =
++ !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
++ eeprom->reg_chip_select =
++ !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
++}
++
++static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
++{
++ struct rt2x00_dev *rt2x00dev = eeprom->data;
++ u32 reg = 0;
++
++ rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
++ rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
++ rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK,
++ !!eeprom->reg_data_clock);
++ rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT,
++ !!eeprom->reg_chip_select);
++
++ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
++}
++
++static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
++{
++ struct eeprom_93cx6 eeprom;
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
++
++ eeprom.data = rt2x00dev;
++ eeprom.register_read = rt2800pci_eepromregister_read;
++ eeprom.register_write = rt2800pci_eepromregister_write;
++ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
++ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
++ eeprom.reg_data_in = 0;
++ eeprom.reg_data_out = 0;
++ eeprom.reg_data_clock = 0;
++ eeprom.reg_chip_select = 0;
++
++ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
++ EEPROM_SIZE / sizeof(u16));
++}
++#else
++static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
++{
++}
++#endif /* CONFIG_RT2800PCI_PCI */
++
++#ifdef CONFIG_RT2X00_LIB_DEBUGFS
++static const struct rt2x00debug rt2800pci_rt2x00debug = {
++ .owner = THIS_MODULE,
++ .csr = {
++ .read = rt2x00pci_register_read,
++ .write = rt2x00pci_register_write,
++ .flags = RT2X00DEBUGFS_OFFSET,
++ .word_base = CSR_REG_BASE,
++ .word_size = sizeof(u32),
++ .word_count = CSR_REG_SIZE / sizeof(u32),
++ },
++ .eeprom = {
++ .read = rt2x00_eeprom_read,
++ .write = rt2x00_eeprom_write,
++ .word_base = EEPROM_BASE,
++ .word_size = sizeof(u16),
++ .word_count = EEPROM_SIZE / sizeof(u16),
++ },
++ .bbp = {
++ .read = rt2800pci_bbp_read,
++ .write = rt2800pci_bbp_write,
++ .word_base = BBP_BASE,
++ .word_size = sizeof(u8),
++ .word_count = BBP_SIZE / sizeof(u8),
++ },
++ .rf = {
++ .read = rt2x00_rf_read,
++ .write = rt2800pci_rf_write,
++ .word_base = RF_BASE,
++ .word_size = sizeof(u32),
++ .word_count = RF_SIZE / sizeof(u32),
++ },
++};
++#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
++
++#ifdef CONFIG_RT2X00_LIB_RFKILL
++static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
++{
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
++ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
++}
++#else
++#define rt2800pci_rfkill_poll NULL
++#endif /* CONFIG_RT2X00_LIB_RFKILL */
++
++#ifdef CONFIG_RT2X00_LIB_LEDS
++static void rt2800pci_brightness_set(struct led_classdev *led_cdev,
++ enum led_brightness brightness)
++{
++ struct rt2x00_led *led =
++ container_of(led_cdev, struct rt2x00_led, led_dev);
++ unsigned int enabled = brightness != LED_OFF;
++ unsigned int bg_mode =
++ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
++ unsigned int polarity =
++ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
++ EEPROM_FREQ_LED_POLARITY);
++ unsigned int ledmode =
++ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
++ EEPROM_FREQ_LED_MODE);
++
++ if (led->type == LED_TYPE_RADIO) {
++ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
++ enabled ? 0x20 : 0);
++ } else if (led->type == LED_TYPE_ASSOC) {
++ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
++ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
++ } else if (led->type == LED_TYPE_QUALITY) {
++ /*
++ * The brightness is divided into 6 levels (0 - 5),
++ * The specs tell us the following levels:
++ * 0, 1 ,3, 7, 15, 31
++ * to determine the level in a simple way we can simply
++ * work with bitshifting:
++ * (1 << level) - 1
++ */
++ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
++ (1 << brightness / (LED_FULL / 6)) - 1,
++ polarity);
++ }
++}
++
++static int rt2800pci_blink_set(struct led_classdev *led_cdev,
++ unsigned long *delay_on,
++ unsigned long *delay_off)
++{
++ struct rt2x00_led *led =
++ container_of(led_cdev, struct rt2x00_led, led_dev);
++ u32 reg;
++
++ rt2x00pci_register_read(led->rt2x00dev, LED_CFG, ®);
++ rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on);
++ rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
++ rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
++ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
++ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
++ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
++ rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
++ rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg);
++
++ return 0;
++}
++
++static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00_led *led,
++ enum led_type type)
++{
++ led->rt2x00dev = rt2x00dev;
++ led->type = type;
++ led->led_dev.brightness_set = rt2800pci_brightness_set;
++ led->led_dev.blink_set = rt2800pci_blink_set;
++ led->flags = LED_INITIALIZED;
++}
++#endif /* CONFIG_RT2X00_LIB_LEDS */
++
++/*
++ * Configuration handlers.
++ */
++static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_crypto *crypto,
++ struct ieee80211_key_conf *key)
++{
++ struct mac_wcid_entry wcid_entry;
++ struct mac_iveiv_entry iveiv_entry;
++ u32 offset;
++ u32 reg;
++
++ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
++
++ rt2x00pci_register_read(rt2x00dev, offset, ®);
++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
++ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER,
++ (crypto->cmd == SET_KEY) * crypto->cipher);
++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX,
++ (crypto->cmd == SET_KEY) * crypto->bssidx);
++ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
++ rt2x00pci_register_write(rt2x00dev, offset, reg);
++
++ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
++
++ memset(&iveiv_entry, 0, sizeof(iveiv_entry));
++ if ((crypto->cipher == CIPHER_TKIP) ||
++ (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
++ (crypto->cipher == CIPHER_AES))
++ iveiv_entry.iv[3] |= 0x20;
++ iveiv_entry.iv[3] |= key->keyidx << 6;
++ rt2x00pci_register_multiwrite(rt2x00dev, offset,
++ &iveiv_entry, sizeof(iveiv_entry));
++
++ offset = MAC_WCID_ENTRY(key->hw_key_idx);
++
++ memset(&wcid_entry, 0, sizeof(wcid_entry));
++ if (crypto->cmd == SET_KEY)
++ memcpy(&wcid_entry, crypto->address, ETH_ALEN);
++ rt2x00pci_register_multiwrite(rt2x00dev, offset,
++ &wcid_entry, sizeof(wcid_entry));
++}
++
++static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_crypto *crypto,
++ struct ieee80211_key_conf *key)
++{
++ struct hw_key_entry key_entry;
++ struct rt2x00_field32 field;
++ u32 offset;
++ u32 reg;
++
++ if (crypto->cmd == SET_KEY) {
++ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
++
++ memcpy(key_entry.key, crypto->key,
++ sizeof(key_entry.key));
++ memcpy(key_entry.tx_mic, crypto->tx_mic,
++ sizeof(key_entry.tx_mic));
++ memcpy(key_entry.rx_mic, crypto->rx_mic,
++ sizeof(key_entry.rx_mic));
++
++ offset = SHARED_KEY_ENTRY(key->hw_key_idx);
++ rt2x00pci_register_multiwrite(rt2x00dev, offset,
++ &key_entry, sizeof(key_entry));
++ }
++
++ /*
++ * The cipher types are stored over multiple registers
++ * starting with SHARED_KEY_MODE_BASE each word will have
++ * 32 bits and contains the cipher types for 2 bssidx each.
++ * Using the correct defines correctly will cause overhead,
++ * so just calculate the correct offset.
++ */
++ field.bit_offset = 4 * (key->hw_key_idx % 8);
++ field.bit_mask = 0x7 << field.bit_offset;
++
++ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
++
++ rt2x00pci_register_read(rt2x00dev, offset, ®);
++ rt2x00_set_field32(®, field,
++ (crypto->cmd == SET_KEY) * crypto->cipher);
++ rt2x00pci_register_write(rt2x00dev, offset, reg);
++
++ /*
++ * Update WCID information
++ */
++ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
++
++ return 0;
++}
++
++static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_crypto *crypto,
++ struct ieee80211_key_conf *key)
++{
++ struct hw_key_entry key_entry;
++ u32 offset;
++
++ if (crypto->cmd == SET_KEY) {
++ /*
++ * 1 pairwise key is possible per AID, this means that the AID
++ * equals our hw_key_idx. Make sure the WCID starts _after_ the
++ * last possible shared key entry.
++ */
++ if (crypto->aid > (256 - 32))
++ return -ENOSPC;
++
++ key->hw_key_idx = 32 + crypto->aid;
++
++
++ memcpy(key_entry.key, crypto->key,
++ sizeof(key_entry.key));
++ memcpy(key_entry.tx_mic, crypto->tx_mic,
++ sizeof(key_entry.tx_mic));
++ memcpy(key_entry.rx_mic, crypto->rx_mic,
++ sizeof(key_entry.rx_mic));
++
++ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
++ rt2x00pci_register_multiwrite(rt2x00dev, offset,
++ &key_entry, sizeof(key_entry));
++ }
++
++ /*
++ * Update WCID information
++ */
++ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
++
++ return 0;
++}
++
++static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev,
++ const unsigned int filter_flags)
++{
++ u32 reg;
++
++ /*
++ * Start configuration steps.
++ * Note that the version error will always be dropped
++ * and broadcast frames will always be accepted since
++ * there is no filter for it at this time.
++ */
++ rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, ®);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR,
++ !(filter_flags & FIF_FCSFAIL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR,
++ !(filter_flags & FIF_PLCPFAIL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
++ !(filter_flags & FIF_PROMISC_IN_BSS));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
++ !(filter_flags & FIF_ALLMULTI));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0);
++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
++ !(filter_flags & FIF_CONTROL));
++ rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg);
++}
++
++static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00_intf *intf,
++ struct rt2x00intf_conf *conf,
++ const unsigned int flags)
++{
++ unsigned int beacon_base;
++ u32 reg;
++
++ if (flags & CONFIG_UPDATE_TYPE) {
++ /*
++ * Clear current synchronisation setup.
++ * For the Beacon base registers we only need to clear
++ * the first byte since that byte contains the VALID and OWNER
++ * bits which (when set to 0) will invalidate the entire beacon.
++ */
++ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
++ rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
++
++ /*
++ * Enable synchronisation.
++ */
++ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ }
++
++ if (flags & CONFIG_UPDATE_MAC) {
++ reg = le32_to_cpu(conf->mac[1]);
++ rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
++ conf->mac[1] = cpu_to_le32(reg);
++
++ rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
++ conf->mac, sizeof(conf->mac));
++ }
++
++ if (flags & CONFIG_UPDATE_BSSID) {
++ reg = le32_to_cpu(conf->bssid[1]);
++ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0);
++ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
++ conf->bssid[1] = cpu_to_le32(reg);
++
++ rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
++ conf->bssid, sizeof(conf->bssid));
++ }
++}
++
++static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_erp *erp)
++{
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
++ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
++ DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
++ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY,
++ !!erp->short_preamble);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE,
++ !!erp->short_preamble);
++ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL,
++ erp->cts_protection ? 2 : 0);
++ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE,
++ erp->basic_rates);
++ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
++
++ rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
++ rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
++ rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
++ rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
++ rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
++ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
++ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
++ rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
++ rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
++ rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
++}
++
++static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev,
++ struct antenna_setup *ant)
++{
++ u8 r1;
++ u8 r3;
++
++ rt2800pci_bbp_read(rt2x00dev, 1, &r1);
++ rt2800pci_bbp_read(rt2x00dev, 3, &r3);
++
++ /*
++ * Configure the TX antenna.
++ */
++ switch ((int)ant->tx) {
++ case 1:
++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
++ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
++ break;
++ case 2:
++ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
++ break;
++ case 3:
++ /* Do nothing */
++ break;
++ }
++
++ /*
++ * Configure the RX antenna.
++ */
++ switch ((int)ant->rx) {
++ case 1:
++ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
++ break;
++ case 2:
++ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
++ break;
++ case 3:
++ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
++ break;
++ }
++
++ rt2800pci_bbp_write(rt2x00dev, 3, r3);
++ rt2800pci_bbp_write(rt2x00dev, 1, r1);
++}
++
++static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_conf *libconf)
++{
++ u16 eeprom;
++ short lna_gain;
++
++ if (libconf->rf.channel <= 14) {
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
++ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
++ } else if (libconf->rf.channel <= 64) {
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
++ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
++ } else if (libconf->rf.channel <= 128) {
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
++ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
++ } else {
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
++ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
++ }
++
++ rt2x00dev->lna_gain = lna_gain;
++}
++
++static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
++
++ if (rt2x00dev->default_ant.tx == 1)
++ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
++
++ if (rt2x00dev->default_ant.rx == 1) {
++ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
++ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
++ } else if (rt2x00dev->default_ant.rx == 2)
++ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
++
++ if (rf->channel > 14) {
++ /*
++ * When TX power is below 0, we should increase it by 7 to
++ * make it a positive value (Minumum value is -7).
++ * However this means that values between 0 and 7 have
++ * double meaning, and we should set a 7DBm boost flag.
++ */
++ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
++ (info->tx_power1 >= 0));
++
++ if (info->tx_power1 < 0)
++ info->tx_power1 += 7;
++
++ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
++ TXPOWER_A_TO_DEV(info->tx_power1));
++
++ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
++ (info->tx_power2 >= 0));
++
++ if (info->tx_power2 < 0)
++ info->tx_power2 += 7;
++
++ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
++ TXPOWER_A_TO_DEV(info->tx_power2));
++ } else {
++ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
++ TXPOWER_G_TO_DEV(info->tx_power1));
++ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
++ TXPOWER_G_TO_DEV(info->tx_power2));
++ }
++
++ rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
++
++ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
++ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
++ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
++ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
++
++ udelay(200);
++
++ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
++ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
++ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
++ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
++
++ udelay(200);
++
++ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
++ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
++ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
++ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u8 rfcsr;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
++ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++ TXPOWER_G_TO_DEV(info->tx_power1));
++ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24,
++ rt2x00dev->calibration[conf_is_ht40(conf)]);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u32 reg;
++ unsigned int tx_pin;
++ u8 bbp;
++
++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
++ else
++ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
++
++ /*
++ * Change BBP settings
++ */
++ rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
++ rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
++ rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
++ rt2800pci_bbp_write(rt2x00dev, 86, 0);
++
++ if (rf->channel <= 14) {
++ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
++ rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
++ rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
++ } else {
++ rt2800pci_bbp_write(rt2x00dev, 82, 0x84);
++ rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
++ }
++ } else {
++ rt2800pci_bbp_write(rt2x00dev, 82, 0xf2);
++
++ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
++ rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
++ else
++ rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
++ }
++
++ rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, ®);
++ rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
++ rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14);
++ rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
++ rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg);
++
++ tx_pin = 0;
++
++ /* Turn on unused PA or LNA when not using 1T or 1R */
++ if (rt2x00dev->default_ant.tx != 1) {
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
++ }
++
++ /* Turn on unused PA or LNA when not using 1T or 1R */
++ if (rt2x00dev->default_ant.rx != 1) {
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
++ }
++
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
++
++ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
++
++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
++ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++ rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
++ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
++ rt2800pci_bbp_write(rt2x00dev, 3, bbp);
++
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
++ if (conf_is_ht40(conf)) {
++ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
++ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
++ rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
++ } else {
++ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
++ rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
++ rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
++ }
++ }
++
++ msleep(1);
++}
++
++static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev,
++ const int txpower)
++{
++ u32 reg;
++ u32 value = TXPOWER_G_TO_DEV(txpower);
++ u8 r1;
++
++ rt2800pci_bbp_read(rt2x00dev, 1, &r1);
++ rt2x00_set_field8(®, BBP1_TX_POWER, 0);
++ rt2800pci_bbp_write(rt2x00dev, 1, r1);
++
++ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value);
++ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
++
++ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value);
++ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
++
++ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value);
++ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
++
++ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value);
++ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
++
++ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
++ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value);
++ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value);
++ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
++}
++
++static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_conf *libconf)
++{
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, ®);
++ rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT,
++ libconf->conf->short_frame_max_tx_count);
++ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
++ libconf->conf->long_frame_max_tx_count);
++ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
++ rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
++ rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
++ rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
++ rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg);
++}
++
++static void rt2800pci_config_duration(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_conf *libconf)
++{
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
++ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
++ libconf->conf->beacon_int * 16);
++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++}
++
++static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_conf *libconf)
++{
++ enum dev_state state =
++ (libconf->conf->flags & IEEE80211_CONF_PS) ?
++ STATE_SLEEP : STATE_AWAKE;
++ u32 reg;
++
++ if (state == STATE_SLEEP) {
++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
++
++ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
++ libconf->conf->listen_interval - 1);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
++
++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
++ } else {
++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
++
++ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
++ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
++ }
++}
++
++static void rt2800pci_config(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_conf *libconf,
++ const unsigned int flags)
++{
++ /* Always recalculate LNA gain before changing configuration */
++ rt2800pci_config_lna_gain(rt2x00dev, libconf);
++
++ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
++ rt2800pci_config_channel(rt2x00dev, libconf->conf,
++ &libconf->rf, &libconf->channel);
++ if (flags & IEEE80211_CONF_CHANGE_POWER)
++ rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level);
++ if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
++ rt2800pci_config_retry_limit(rt2x00dev, libconf);
++ if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
++ rt2800pci_config_duration(rt2x00dev, libconf);
++ if (flags & IEEE80211_CONF_CHANGE_PS)
++ rt2800pci_config_ps(rt2x00dev, libconf);
++}
++
++/*
++ * Link tuning
++ */
++static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev,
++ struct link_qual *qual)
++{
++ u32 reg;
++
++ /*
++ * Update FCS error count from register.
++ */
++ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®);
++ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
++}
++
++static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev)
++{
++ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
++ return 0x2e + rt2x00dev->lna_gain;
++
++ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
++ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
++ else
++ return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
++}
++
++static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev,
++ struct link_qual *qual, u8 vgc_level)
++{
++ if (qual->vgc_level != vgc_level) {
++ rt2800pci_bbp_write(rt2x00dev, 66, vgc_level);
++ qual->vgc_level = vgc_level;
++ qual->vgc_level_reg = vgc_level;
++ }
++}
++
++static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
++ struct link_qual *qual)
++{
++ rt2800pci_set_vgc(rt2x00dev, qual,
++ rt2800pci_get_default_vgc(rt2x00dev));
++}
++
++static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
++ struct link_qual *qual, const u32 count)
++{
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
++ return;
++
++ /*
++ * When RSSI is better then -80 increase VGC level with 0x10
++ */
++ rt2800pci_set_vgc(rt2x00dev, qual,
++ rt2800pci_get_default_vgc(rt2x00dev) +
++ ((qual->rssi > -80) * 0x10));
++}
++
++/*
++ * Firmware functions
++ */
++static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
++{
++ return FIRMWARE_RT2860;
++}
++
++static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
++ const u8 *data, const size_t len)
++{
++ u16 fw_crc;
++ u16 crc;
++
++ /*
++ * Only support 8kb firmware files.
++ */
++ if (len != 8192)
++ return FW_BAD_LENGTH;
++
++ /*
++ * The last 2 bytes in the firmware array are the crc checksum itself,
++ * this means that we should never pass those 2 bytes to the crc
++ * algorithm.
++ */
++ fw_crc = (data[len - 2] << 8 | data[len - 1]);
++
++ /*
++ * Use the crc ccitt algorithm.
++ * This will return the same value as the legacy driver which
++ * used bit ordering reversion on the both the firmware bytes
++ * before input input as well as on the final output.
++ * Obviously using crc ccitt directly is much more efficient.
++ */
++ crc = crc_ccitt(~0, data, len - 2);
++
++ /*
++ * There is a small difference between the crc-itu-t + bitrev and
++ * the crc-ccitt crc calculation. In the latter method the 2 bytes
++ * will be swapped, use swab16 to convert the crc to the correct
++ * value.
++ */
++ crc = swab16(crc);
++
++ return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
++}
++
++static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
++ const u8 *data, const size_t len)
++{
++ unsigned int i;
++ u32 reg;
++
++ /*
++ * Wait for stable hardware.
++ */
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
++ if (reg && reg != ~0)
++ break;
++ msleep(1);
++ }
++
++ if (i == REGISTER_BUSY_COUNT) {
++ ERROR(rt2x00dev, "Unstable hardware.\n");
++ return -EBUSY;
++ }
++
++ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
++
++ /*
++ * Disable DMA, will be reenabled later when enabling
++ * the radio.
++ */
++ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
++ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++
++ /*
++ * enable Host program ram write selection
++ */
++ reg = 0;
++ rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
++ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
++
++ /*
++ * Write firmware to device.
++ */
++ rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
++ data, len);
++
++ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
++ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
++
++ /*
++ * Wait for device to stabilize.
++ */
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
++ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
++ break;
++ msleep(1);
++ }
++
++ if (i == REGISTER_BUSY_COUNT) {
++ ERROR(rt2x00dev, "PBF system register not ready.\n");
++ return -EBUSY;
++ }
++
++ /*
++ * Disable interrupts
++ */
++ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
++
++ /*
++ * Initialize BBP R/W access agent
++ */
++ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++
++ return 0;
++}
++
++/*
++ * Initialization functions.
++ */
++static bool rt2800pci_get_entry_state(struct queue_entry *entry)
++{
++ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
++ u32 word;
++
++ if (entry->queue->qid == QID_RX) {
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++
++ return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
++ } else {
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++
++ return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
++ }
++}
++
++static void rt2800pci_clear_entry(struct queue_entry *entry)
++{
++ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
++ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
++ u32 word;
++
++ if (entry->queue->qid == QID_RX) {
++ rt2x00_desc_read(entry_priv->desc, 0, &word);
++ rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
++ rt2x00_desc_write(entry_priv->desc, 0, word);
++
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++ rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
++ rt2x00_desc_write(entry_priv->desc, 1, word);
++ } else {
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
++ rt2x00_desc_write(entry_priv->desc, 1, word);
++ }
++}
++
++static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
++{
++ struct queue_entry_priv_pci *entry_priv;
++ u32 reg;
++
++ /*
++ * Initialize registers.
++ */
++ entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
++ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
++ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
++ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
++
++ entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
++ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
++ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
++ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
++
++ entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
++ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
++ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
++ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
++
++ entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
++ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
++ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
++ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
++
++ entry_priv = rt2x00dev->rx->entries[0].priv_data;
++ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
++ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
++ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
++
++ /*
++ * Enable global DMA configuration
++ */
++ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
++ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
++
++ return 0;
++}
++
++static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
++{
++ u32 reg;
++ unsigned int i;
++
++ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
++ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
++
++ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
++ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
++
++ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
++
++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
++
++ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, ®);
++ rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
++ rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
++ rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
++ rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
++ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg);
++
++ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, ®);
++ rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
++ rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
++ rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
++ rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
++ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg);
++
++ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
++ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
++
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
++
++ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
++ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
++ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++
++ rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, ®);
++ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
++ rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0);
++ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
++ rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0);
++ rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0);
++ rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1);
++ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0);
++ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
++ rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
++ rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
++ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®);
++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
++ else
++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
++ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0);
++ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
++ rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
++
++ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
++ rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
++ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®);
++ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8);
++ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
++ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
++ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
++ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
++ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®);
++ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
++ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0);
++ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1);
++ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
++ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
++ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
++ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
++ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
++ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
++ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®);
++ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
++ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0);
++ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
++ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
++ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®);
++ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
++ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0);
++ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1);
++ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
++ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
++ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
++ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
++ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
++ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
++ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®);
++ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
++ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0);
++ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
++ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
++ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
++ rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
++
++ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®);
++ rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
++ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
++ IEEE80211_MAX_RTS_THRESHOLD);
++ rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
++ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
++
++ /*
++ * ASIC will keep garbage value after boot, clear encryption keys.
++ */
++ for (i = 0; i < 256; i++) {
++ u32 wcid[2] = { 0xffffffff, 0x00ffffff };
++ rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
++ wcid, sizeof(wcid));
++
++ rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
++ rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
++ }
++
++ for (i = 0; i < 16; i++)
++ rt2x00pci_register_write(rt2x00dev,
++ SHARED_KEY_MODE_ENTRY(i), 0);
++
++ /*
++ * Clear all beacons
++ * For the Beacon base registers we only need to clear
++ * the first byte since that byte contains the VALID and OWNER
++ * bits which (when set to 0) will invalidate the entire beacon.
++ */
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
++ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
++
++ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, ®);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5);
++ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6);
++ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg);
++
++ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, ®);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13);
++ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14);
++ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg);
++
++ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, ®);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13);
++ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14);
++ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg);
++
++ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, ®);
++ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0);
++ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0);
++ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1);
++ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2);
++ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg);
++
++ /*
++ * We must clear the error counters.
++ * These registers are cleared on read,
++ * so we may pass a useless variable to store the value.
++ */
++ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®);
++ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, ®);
++ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, ®);
++ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, ®);
++ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, ®);
++ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, ®);
++
++ return 0;
++}
++
++static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
++{
++ unsigned int i;
++ u32 reg;
++
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, ®);
++ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
++ return 0;
++
++ udelay(REGISTER_BUSY_DELAY);
++ }
++
++ ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
++ return -EACCES;
++}
++
++static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
++{
++ unsigned int i;
++ u8 value;
++
++ /*
++ * BBP was enabled after firmware was loaded,
++ * but we need to reactivate it now.
++ */
++ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ msleep(1);
++
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ rt2800pci_bbp_read(rt2x00dev, 0, &value);
++ if ((value != 0xff) && (value != 0x00))
++ return 0;
++ udelay(REGISTER_BUSY_DELAY);
++ }
++
++ ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
++ return -EACCES;
++}
++
++static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev)
++{
++ unsigned int i;
++ u16 eeprom;
++ u8 reg_id;
++ u8 value;
++
++ if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) ||
++ rt2800pci_wait_bbp_ready(rt2x00dev)))
++ return -EACCES;
++
++ rt2800pci_bbp_write(rt2x00dev, 65, 0x2c);
++ rt2800pci_bbp_write(rt2x00dev, 66, 0x38);
++ rt2800pci_bbp_write(rt2x00dev, 69, 0x12);
++ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
++ rt2800pci_bbp_write(rt2x00dev, 73, 0x10);
++ rt2800pci_bbp_write(rt2x00dev, 81, 0x37);
++ rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
++ rt2800pci_bbp_write(rt2x00dev, 83, 0x6a);
++ rt2800pci_bbp_write(rt2x00dev, 84, 0x99);
++ rt2800pci_bbp_write(rt2x00dev, 86, 0x00);
++ rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
++ rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
++ rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
++ rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
++
++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
++ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
++ rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
++ }
++
++ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
++ rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
++
++ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
++ rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
++ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
++ rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
++ }
++
++ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
++
++ if (eeprom != 0xffff && eeprom != 0x0000) {
++ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
++ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
++ rt2800pci_bbp_write(rt2x00dev, reg_id, value);
++ }
++ }
++
++ return 0;
++}
++
++static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++ bool bw40, u8 rfcsr24, u8 filter_target)
++{
++ unsigned int i;
++ u8 bbp;
++ u8 rfcsr;
++ u8 passband;
++ u8 stopband;
++ u8 overtuned = 0;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
++ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * Set power & frequency of passband test tone
++ */
++ rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++ for (i = 0; i < 100; i++) {
++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800pci_bbp_read(rt2x00dev, 55, &passband);
++ if (passband)
++ break;
++ }
++
++ /*
++ * Set power & frequency of stopband test tone
++ */
++ rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
++
++ for (i = 0; i < 100; i++) {
++ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++ msleep(1);
++
++ rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
++
++ if ((passband - stopband) <= filter_target) {
++ rfcsr24++;
++ overtuned += ((passband - stopband) == filter_target);
++ } else
++ break;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ }
++
++ rfcsr24 -= !!overtuned;
++
++ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++ return rfcsr24;
++}
++
++static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++ u8 rfcsr;
++ u8 bbp;
++
++ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3022))
++ return 0;
++
++ /*
++ * Init RF calibration.
++ */
++ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++ msleep(1);
++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
++ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
++ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
++ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
++ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
++ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
++ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
++ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
++ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
++ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
++ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
++ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
++ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
++ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
++ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
++ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
++ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
++ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
++ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
++ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
++ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
++ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
++ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
++ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
++ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
++ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
++ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
++ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
++ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
++ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
++
++ /*
++ * Set RX Filter calibration for 20MHz and 40MHz
++ */
++ rt2x00dev->calibration[0] =
++ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++ rt2x00dev->calibration[1] =
++ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++ /*
++ * Set back to initial state
++ */
++ rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ /*
++ * set BBP back to BW20
++ */
++ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++ return 0;
++}
++
++/*
++ * Device state switch handlers.
++ */
++static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
++ enum dev_state state)
++{
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX,
++ (state == STATE_RADIO_RX_ON) ||
++ (state == STATE_RADIO_RX_ON_LINK));
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++}
++
++static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
++ enum dev_state state)
++{
++ int mask = (state == STATE_RADIO_IRQ_ON);
++ u32 reg;
++
++ /*
++ * When interrupts are being enabled, the interrupt registers
++ * should clear the register to assure a clean state.
++ */
++ if (state == STATE_RADIO_IRQ_ON) {
++ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
++ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
++ }
++
++ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
++ rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask);
++ rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask);
++ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
++}
++
++static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
++{
++ unsigned int i;
++ u32 reg;
++
++ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
++ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
++ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
++ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
++ return 0;
++
++ msleep(1);
++ }
++
++ ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
++ return -EACCES;
++}
++
++static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
++{
++ u32 reg;
++ u16 word;
++
++ /*
++ * Initialize all registers.
++ */
++ if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
++ rt2800pci_init_queues(rt2x00dev) ||
++ rt2800pci_init_registers(rt2x00dev) ||
++ rt2800pci_wait_wpdma_ready(rt2x00dev) ||
++ rt2800pci_init_bbp(rt2x00dev) ||
++ rt2800pci_init_rfcsr(rt2x00dev)))
++ return -EIO;
++
++ /*
++ * Send signal to firmware during boot time.
++ */
++ rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
++
++ /*
++ * Enable RX.
++ */
++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++
++ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
++ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++
++ /*
++ * Initialize LED control
++ */
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
++ rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
++ word & 0xff, (word >> 8) & 0xff);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
++ rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
++ word & 0xff, (word >> 8) & 0xff);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
++ rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
++ word & 0xff, (word >> 8) & 0xff);
++
++ return 0;
++}
++
++static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
++{
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
++ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
++ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++
++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
++ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
++ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
++
++ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
++
++ /* Wait for DMA, ignore error */
++ rt2800pci_wait_wpdma_ready(rt2x00dev);
++}
++
++static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
++ enum dev_state state)
++{
++ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
++
++ if (state == STATE_AWAKE) {
++ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
++ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
++ } else
++ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
++
++ return 0;
++}
++
++static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
++ enum dev_state state)
++{
++ int retval = 0;
++
++ switch (state) {
++ case STATE_RADIO_ON:
++ /*
++ * Before the radio can be enabled, the device first has
++ * to be woken up. After that it needs a bit of time
++ * to be fully awake and the radio can be enabled.
++ */
++ rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
++ msleep(1);
++ retval = rt2800pci_enable_radio(rt2x00dev);
++ break;
++ case STATE_RADIO_OFF:
++ /*
++ * After the radio has been disablee, the device should
++ * be put to sleep for powersaving.
++ */
++ rt2800pci_disable_radio(rt2x00dev);
++ rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
++ break;
++ case STATE_RADIO_RX_ON:
++ case STATE_RADIO_RX_ON_LINK:
++ case STATE_RADIO_RX_OFF:
++ case STATE_RADIO_RX_OFF_LINK:
++ rt2800pci_toggle_rx(rt2x00dev, state);
++ break;
++ case STATE_RADIO_IRQ_ON:
++ case STATE_RADIO_IRQ_OFF:
++ rt2800pci_toggle_irq(rt2x00dev, state);
++ break;
++ case STATE_DEEP_SLEEP:
++ case STATE_SLEEP:
++ case STATE_STANDBY:
++ case STATE_AWAKE:
++ retval = rt2800pci_set_state(rt2x00dev, state);
++ break;
++ default:
++ retval = -ENOTSUPP;
++ break;
++ }
++
++ if (unlikely(retval))
++ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
++ state, retval);
++
++ return retval;
++}
++
++/*
++ * TX descriptor initialization
++ */
++static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
++ struct sk_buff *skb,
++ struct txentry_desc *txdesc)
++{
++ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
++ __le32 *txd = skbdesc->desc;
++ __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->hw->extra_tx_headroom);
++ u32 word;
++
++ /*
++ * Initialize TX Info descriptor
++ */
++ rt2x00_desc_read(txwi, 0, &word);
++ rt2x00_set_field32(&word, TXWI_W0_FRAG,
++ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
++ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
++ rt2x00_set_field32(&word, TXWI_W0_TS,
++ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
++ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
++ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
++ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
++ rt2x00_set_field32(&word, TXWI_W0_BW,
++ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
++ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
++ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
++ rt2x00_desc_write(txwi, 0, word);
++
++ rt2x00_desc_read(txwi, 1, &word);
++ rt2x00_set_field32(&word, TXWI_W1_ACK,
++ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
++ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
++ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
++ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
++ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
++ txdesc->key_idx : 0xff);
++ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
++ skb->len - txdesc->l2pad);
++ rt2x00_set_field32(&word, TXWI_W1_PACKETID,
++ skbdesc->entry->queue->qid);
++ rt2x00_desc_write(txwi, 1, word);
++
++ /*
++ * Always write 0 to IV/EIV fields, hardware will insert the IV
++ * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0.
++ * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data
++ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
++ * crypto entry in the registers should be used to encrypt the frame.
++ */
++ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
++ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
++
++ /*
++ * Initialize TX descriptor
++ */
++ rt2x00_desc_read(txd, 0, &word);
++ rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
++ rt2x00_desc_write(txd, 0, word);
++
++ rt2x00_desc_read(txd, 1, &word);
++ rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len);
++ rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1);
++ rt2x00_set_field32(&word, TXD_W1_BURST,
++ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
++ rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
++ rt2x00dev->hw->extra_tx_headroom);
++ rt2x00_set_field32(&word, TXD_W1_LAST_SEC0,
++ !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
++ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
++ rt2x00_desc_write(txd, 1, word);
++
++ rt2x00_desc_read(txd, 2, &word);
++ rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
++ skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom);
++ rt2x00_desc_write(txd, 2, word);
++
++ rt2x00_desc_read(txd, 3, &word);
++ rt2x00_set_field32(&word, TXD_W3_WIV,
++ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
++ rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
++ rt2x00_desc_write(txd, 3, word);
++}
++
++/*
++ * TX data initialization
++ */
++static void rt2800pci_write_beacon(struct queue_entry *entry)
++{
++ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
++ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
++ unsigned int beacon_base;
++ u32 reg;
++
++ /*
++ * Disable beaconing while we are reloading the beacon data,
++ * otherwise we might be sending out invalid data.
++ */
++ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
++ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++
++ /*
++ * Write entire beacon with descriptor to register.
++ */
++ beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
++ rt2x00pci_register_multiwrite(rt2x00dev,
++ beacon_base,
++ skbdesc->desc, skbdesc->desc_len);
++ rt2x00pci_register_multiwrite(rt2x00dev,
++ beacon_base + skbdesc->desc_len,
++ entry->skb->data, entry->skb->len);
++
++ /*
++ * Clean up beacon skb.
++ */
++ dev_kfree_skb_any(entry->skb);
++ entry->skb = NULL;
++}
++
++static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
++ const enum data_queue_qid queue_idx)
++{
++ struct data_queue *queue;
++ unsigned int idx, qidx = 0;
++ u32 reg;
++
++ if (queue_idx == QID_BEACON) {
++ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
++ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
++ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
++ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
++ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ }
++ return;
++ }
++
++ if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
++ return;
++
++ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
++ idx = queue->index[Q_INDEX];
++
++ if (queue_idx == QID_MGMT)
++ qidx = 5;
++ else
++ qidx = queue_idx;
++
++ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
++}
++
++static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
++ const enum data_queue_qid qid)
++{
++ u32 reg;
++
++ if (qid == QID_BEACON) {
++ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0);
++ return;
++ }
++
++ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
++ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
++ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
++}
++
++/*
++ * RX control handlers
++ */
++static void rt2800pci_fill_rxdone(struct queue_entry *entry,
++ struct rxdone_entry_desc *rxdesc)
++{
++ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
++ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
++ __le32 *rxd = entry_priv->desc;
++ __le32 *rxwi = (__le32 *)entry->skb->data;
++ u32 rxd3;
++ u32 rxwi0;
++ u32 rxwi1;
++ u32 rxwi2;
++ u32 rxwi3;
++
++ rt2x00_desc_read(rxd, 3, &rxd3);
++ rt2x00_desc_read(rxwi, 0, &rxwi0);
++ rt2x00_desc_read(rxwi, 1, &rxwi1);
++ rt2x00_desc_read(rxwi, 2, &rxwi2);
++ rt2x00_desc_read(rxwi, 3, &rxwi3);
++
++ if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
++ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
++
++ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
++ /*
++ * Unfortunately we don't know the cipher type used during
++ * decryption. This prevents us from correct providing
++ * correct statistics through debugfs.
++ */
++ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
++ rxdesc->cipher_status =
++ rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
++ }
++
++ if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
++ /*
++ * Hardware has stripped IV/EIV data from 802.11 frame during
++ * decryption. Unfortunately the descriptor doesn't contain
++ * any fields with the EIV/IV data either, so they can't
++ * be restored by rt2x00lib.
++ */
++ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
++
++ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
++ rxdesc->flags |= RX_FLAG_DECRYPTED;
++ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
++ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
++ }
++
++ if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
++ rxdesc->dev_flags |= RXDONE_MY_BSS;
++
++ if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD))
++ rxdesc->dev_flags |= RXDONE_L2PAD;
++
++ if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
++ rxdesc->flags |= RX_FLAG_SHORT_GI;
++
++ if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
++ rxdesc->flags |= RX_FLAG_40MHZ;
++
++ /*
++ * Detect RX rate, always use MCS as signal type.
++ */
++ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
++ rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
++ rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
++
++ /*
++ * Mask of 0x8 bit to remove the short preamble flag.
++ */
++ if (rxdesc->rate_mode == RATE_MODE_CCK)
++ rxdesc->signal &= ~0x8;
++
++ rxdesc->rssi =
++ (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
++ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
++
++ rxdesc->noise =
++ (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
++ rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
++
++ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
++
++ /*
++ * Set RX IDX in register to inform hardware that we have handled
++ * this entry and it is available for reuse again.
++ */
++ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
++
++ /*
++ * Remove TXWI descriptor from start of buffer.
++ */
++ skb_pull(entry->skb, RXWI_DESC_SIZE);
++ skb_trim(entry->skb, rxdesc->size);
++}
++
++/*
++ * Interrupt functions.
++ */
++static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
++{
++ struct data_queue *queue;
++ struct queue_entry *entry;
++ struct queue_entry *entry_done;
++ struct queue_entry_priv_pci *entry_priv;
++ struct txdone_entry_desc txdesc;
++ u32 word;
++ u32 reg;
++ u32 old_reg;
++ int type;
++ int index;
++
++ /*
++ * During each loop we will compare the freshly read
++ * TX_STA_FIFO register value with the value read from
++ * the previous loop. If the 2 values are equal then
++ * we should stop processing because the chance it
++ * quite big that the device has been unplugged and
++ * we risk going into an endless loop.
++ */
++ old_reg = 0;
++
++ while (1) {
++ rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, ®);
++ if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
++ break;
++
++ if (old_reg == reg)
++ break;
++ old_reg = reg;
++
++ /*
++ * Skip this entry when it contains an invalid
++ * queue identication number.
++ */
++ type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
++ queue = rt2x00queue_get_queue(rt2x00dev, type);
++ if (unlikely(!queue))
++ continue;
++
++ /*
++ * Skip this entry when it contains an invalid
++ * index number.
++ */
++ index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
++ if (unlikely(index >= queue->limit))
++ continue;
++
++ entry = &queue->entries[index];
++ entry_priv = entry->priv_data;
++ rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word);
++
++ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
++ while (entry != entry_done) {
++ /*
++ * Catch up.
++ * Just report any entries we missed as failed.
++ */
++ WARNING(rt2x00dev,
++ "TX status report missed for entry %d\n",
++ entry_done->entry_idx);
++
++ txdesc.flags = 0;
++ __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
++ txdesc.retry = 0;
++
++ rt2x00lib_txdone(entry_done, &txdesc);
++ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
++ }
++
++ /*
++ * Obtain the status about this packet.
++ */
++ txdesc.flags = 0;
++ if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS))
++ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
++ else
++ __set_bit(TXDONE_FAILURE, &txdesc.flags);
++ txdesc.retry = rt2x00_get_field32(word, TXWI_W0_MCS);
++
++ rt2x00lib_txdone(entry, &txdesc);
++ }
++}
++
++static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
++{
++ struct rt2x00_dev *rt2x00dev = dev_instance;
++ u32 reg;
++
++ /* Read status and ACK all interrupts */
++ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
++ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
++
++ if (!reg)
++ return IRQ_NONE;
++
++ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
++ return IRQ_HANDLED;
++
++ /*
++ * 1 - Rx ring done interrupt.
++ */
++ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
++ rt2x00pci_rxdone(rt2x00dev);
++
++ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
++ rt2800pci_txdone(rt2x00dev);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * Device probe functions.
++ */
++static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
++{
++ u16 word;
++ u8 *mac;
++ u8 default_lna_gain;
++
++ /*
++ * Read EEPROM into buffer
++ */
++ switch(rt2x00dev->chip.rt) {
++ case RT2880:
++ case RT3052:
++ rt2800pci_read_eeprom_soc(rt2x00dev);
++ break;
++ default:
++ rt2800pci_read_eeprom_pci(rt2x00dev);
++ break;
++ }
++
++ /*
++ * Start validation of the data that has been read.
++ */
++ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
++ if (!is_valid_ether_addr(mac)) {
++ DECLARE_MAC_BUF(macbuf);
++
++ random_ether_addr(mac);
++ EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
++ }
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
++ if (word == 0xffff) {
++ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
++ rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
++ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
++ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
++ } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
++ /*
++ * There is a max of 2 RX streams for RT2860 series
++ */
++ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
++ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
++ }
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
++ if (word == 0xffff) {
++ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
++ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
++ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
++ }
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
++ if ((word & 0x00ff) == 0x00ff) {
++ rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
++ rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
++ LED_MODE_TXRX_ACTIVITY);
++ rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
++ EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
++ }
++
++ /*
++ * During the LNA validation we are going to use
++ * lna0 as correct value. Note that EEPROM_LNA
++ * is never validated.
++ */
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
++ default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
++ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
++ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
++ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
++ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
++ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
++ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
++ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
++ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
++ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
++ default_lna_gain);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
++ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
++ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
++ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
++ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
++ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
++ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
++ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
++ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
++ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
++ default_lna_gain);
++ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
++
++ return 0;
++}
++
++static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
++{
++ u32 reg;
++ u16 value;
++ u16 eeprom;
++
++ /*
++ * Read EEPROM word for configuration.
++ */
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++ /*
++ * Identify RF chipset.
++ */
++ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
++ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
++ rt2x00_set_chip_rf(rt2x00dev, value, reg);
++
++ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++ !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
++ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
++ return -ENODEV;
++ }
++
++ /*
++ * Identify default antenna configuration.
++ */
++ rt2x00dev->default_ant.tx =
++ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
++ rt2x00dev->default_ant.rx =
++ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
++
++ /*
++ * Read frequency offset and RF programming sequence.
++ */
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
++ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
++
++ /*
++ * Read external LNA informations.
++ */
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
++
++ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
++ __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
++ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
++ __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
++
++ /*
++ * Detect if this device has an hardware controlled radio.
++ */
++#ifdef CONFIG_RT2X00_LIB_RFKILL
++ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
++ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
++#endif /* CONFIG_RT2X00_LIB_RFKILL */
++
++ /*
++ * Store led settings, for correct led behaviour.
++ */
++#ifdef CONFIG_RT2X00_LIB_LEDS
++ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
++ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
++ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
++#endif /* CONFIG_RT2X00_LIB_LEDS */
++
++ return 0;
++}
++
++/*
++ * RF value list for rt2860
++ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
++ */
++static const struct rf_channel rf_vals[] = {
++ { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
++ { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
++ { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
++ { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
++ { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
++ { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
++ { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
++ { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
++ { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
++ { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
++ { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
++ { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
++ { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
++ { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
++
++ /* 802.11 UNI / HyperLan 2 */
++ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
++ { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
++ { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
++ { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
++ { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
++ { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
++ { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
++ { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
++ { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
++ { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
++ { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
++ { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
++
++ /* 802.11 HyperLan 2 */
++ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
++ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
++ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
++ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
++ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
++ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
++ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
++ { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
++ { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
++ { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
++ { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
++ { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
++ { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
++ { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
++ { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
++ { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
++
++ /* 802.11 UNII */
++ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
++ { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
++ { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
++ { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
++ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
++ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
++ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
++
++ /* 802.11 Japan */
++ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
++ { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
++ { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
++ { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
++ { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
++ { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
++ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
++};
++
++static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
++{
++ struct hw_mode_spec *spec = &rt2x00dev->spec;
++ struct channel_info *info;
++ char *tx_power1;
++ char *tx_power2;
++ unsigned int i;
++ u16 eeprom;
++
++ /*
++ * Initialize all hw fields.
++ */
++ rt2x00dev->hw->flags =
++ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
++ IEEE80211_HW_SIGNAL_DBM |
++ IEEE80211_HW_SUPPORTS_PS |
++ IEEE80211_HW_PS_NULLFUNC_STACK;
++ rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE;
++
++ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
++ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
++ rt2x00_eeprom_addr(rt2x00dev,
++ EEPROM_MAC_ADDR_0));
++
++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++ /*
++ * Initialize hw_mode information.
++ */
++ spec->supported_bands = SUPPORT_BAND_2GHZ;
++ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
++
++ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
++ rt2x00_rf(&rt2x00dev->chip, RF2720) ||
++ rt2x00_rf(&rt2x00dev->chip, RF3021) ||
++ rt2x00_rf(&rt2x00dev->chip, RF3022)) {
++ spec->num_channels = 14;
++ spec->channels = rf_vals;
++ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
++ rt2x00_rf(&rt2x00dev->chip, RF2750)) {
++ spec->supported_bands |= SUPPORT_BAND_5GHZ;
++ spec->num_channels = ARRAY_SIZE(rf_vals);
++ spec->channels = rf_vals;
++ }
++
++ /*
++ * Initialize HT information.
++ */
++ spec->ht.ht_supported = true;
++ spec->ht.cap =
++ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
++ IEEE80211_HT_CAP_GRN_FLD |
++ IEEE80211_HT_CAP_SGI_20 |
++ IEEE80211_HT_CAP_SGI_40 |
++ IEEE80211_HT_CAP_TX_STBC |
++ IEEE80211_HT_CAP_RX_STBC |
++ IEEE80211_HT_CAP_PSMP_SUPPORT;
++ spec->ht.ampdu_factor = 3;
++ spec->ht.ampdu_density = 4;
++ spec->ht.mcs.tx_params =
++ IEEE80211_HT_MCS_TX_DEFINED |
++ IEEE80211_HT_MCS_TX_RX_DIFF |
++ ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
++ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
++
++ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
++ case 3:
++ spec->ht.mcs.rx_mask[2] = 0xff;
++ case 2:
++ spec->ht.mcs.rx_mask[1] = 0xff;
++ case 1:
++ spec->ht.mcs.rx_mask[0] = 0xff;
++ spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
++ break;
++ }
++
++ /*
++ * Create channel information array
++ */
++ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
++ if (!info)
++ return -ENOMEM;
++
++ spec->channels_info = info;
++
++ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
++ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
++
++ for (i = 0; i < 14; i++) {
++ info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
++ info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
++ }
++
++ if (spec->num_channels > 14) {
++ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
++ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
++
++ for (i = 14; i < spec->num_channels; i++) {
++ info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
++ info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
++ }
++ }
++
++ return 0;
++}
++
++static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
++{
++ int retval;
++
++ /*
++ * Allocate eeprom data.
++ */
++ retval = rt2800pci_validate_eeprom(rt2x00dev);
++ if (retval)
++ return retval;
++
++ retval = rt2800pci_init_eeprom(rt2x00dev);
++ if (retval)
++ return retval;
++
++ /*
++ * Initialize hw specifications.
++ */
++ retval = rt2800pci_probe_hw_mode(rt2x00dev);
++ if (retval)
++ return retval;
++
++ /*
++ * This device requires firmware.
++ */
++ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
++ !rt2x00_rt(&rt2x00dev->chip, RT3052))
++ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
++ __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
++ if (!modparam_nohwcrypt)
++ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
++
++ /*
++ * Set the rssi offset.
++ */
++ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
++
++ return 0;
++}
++
++/*
++ * IEEE80211 stack callback functions.
++ */
++static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
++ u32 *iv32, u16 *iv16)
++{
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++ struct mac_iveiv_entry iveiv_entry;
++ u32 offset;
++
++ offset = MAC_IVEIV_ENTRY(hw_key_idx);
++ rt2x00pci_register_multiread(rt2x00dev, offset,
++ &iveiv_entry, sizeof(iveiv_entry));
++
++ memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
++ memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
++}
++
++static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
++{
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++ u32 reg;
++ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
++
++ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®);
++ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
++ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®);
++ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
++ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
++ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
++ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®);
++ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
++ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®);
++ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
++ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®);
++ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
++ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®);
++ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
++ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
++
++ return 0;
++}
++
++static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
++ const struct ieee80211_tx_queue_params *params)
++{
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++ struct data_queue *queue;
++ struct rt2x00_field32 field;
++ int retval;
++ u32 reg;
++ u32 offset;
++
++ /*
++ * First pass the configuration through rt2x00lib, that will
++ * update the queue settings and validate the input. After that
++ * we are free to update the registers based on the value
++ * in the queue parameter.
++ */
++ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
++ if (retval)
++ return retval;
++
++ /*
++ * We only need to perform additional register initialization
++ * for WMM queues/
++ */
++ if (queue_idx >= 4)
++ return 0;
++
++ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
++
++ /* Update WMM TXOP register */
++ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
++ field.bit_offset = (queue_idx & 1) * 16;
++ field.bit_mask = 0xffff << field.bit_offset;
++
++ rt2x00pci_register_read(rt2x00dev, offset, ®);
++ rt2x00_set_field32(®, field, queue->txop);
++ rt2x00pci_register_write(rt2x00dev, offset, reg);
++
++ /* Update WMM registers */
++ field.bit_offset = queue_idx * 4;
++ field.bit_mask = 0xf << field.bit_offset;
++
++ rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, ®);
++ rt2x00_set_field32(®, field, queue->aifs);
++ rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, ®);
++ rt2x00_set_field32(®, field, queue->cw_min);
++ rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
++
++ rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, ®);
++ rt2x00_set_field32(®, field, queue->cw_max);
++ rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
++
++ /* Update EDCA registers */
++ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
++
++ rt2x00pci_register_read(rt2x00dev, offset, ®);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
++ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
++ rt2x00pci_register_write(rt2x00dev, offset, reg);
++
++ return 0;
++}
++
++static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw)
++{
++ struct rt2x00_dev *rt2x00dev = hw->priv;
++ u64 tsf;
++ u32 reg;
++
++ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, ®);
++ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
++ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, ®);
++ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
++
++ return tsf;
++}
++
++static const struct ieee80211_ops rt2800pci_mac80211_ops = {
++ .tx = rt2x00mac_tx,
++ .start = rt2x00mac_start,
++ .stop = rt2x00mac_stop,
++ .add_interface = rt2x00mac_add_interface,
++ .remove_interface = rt2x00mac_remove_interface,
++ .config = rt2x00mac_config,
++ .config_interface = rt2x00mac_config_interface,
++ .configure_filter = rt2x00mac_configure_filter,
++ .set_key = rt2x00mac_set_key,
++ .get_stats = rt2x00mac_get_stats,
++ .get_tkip_seq = rt2800pci_get_tkip_seq,
++ .set_rts_threshold = rt2800pci_set_rts_threshold,
++ .bss_info_changed = rt2x00mac_bss_info_changed,
++ .conf_tx = rt2800pci_conf_tx,
++ .get_tx_stats = rt2x00mac_get_tx_stats,
++ .get_tsf = rt2800pci_get_tsf,
++};
++
++static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
++ .irq_handler = rt2800pci_interrupt,
++ .probe_hw = rt2800pci_probe_hw,
++ .get_firmware_name = rt2800pci_get_firmware_name,
++ .check_firmware = rt2800pci_check_firmware,
++ .load_firmware = rt2800pci_load_firmware,
++ .initialize = rt2x00pci_initialize,
++ .uninitialize = rt2x00pci_uninitialize,
++ .get_entry_state = rt2800pci_get_entry_state,
++ .clear_entry = rt2800pci_clear_entry,
++ .set_device_state = rt2800pci_set_device_state,
++ .rfkill_poll = rt2800pci_rfkill_poll,
++ .link_stats = rt2800pci_link_stats,
++ .reset_tuner = rt2800pci_reset_tuner,
++ .link_tuner = rt2800pci_link_tuner,
++ .write_tx_desc = rt2800pci_write_tx_desc,
++ .write_tx_data = rt2x00pci_write_tx_data,
++ .write_beacon = rt2800pci_write_beacon,
++ .kick_tx_queue = rt2800pci_kick_tx_queue,
++ .kill_tx_queue = rt2800pci_kill_tx_queue,
++ .fill_rxdone = rt2800pci_fill_rxdone,
++ .config_shared_key = rt2800pci_config_shared_key,
++ .config_pairwise_key = rt2800pci_config_pairwise_key,
++ .config_filter = rt2800pci_config_filter,
++ .config_intf = rt2800pci_config_intf,
++ .config_erp = rt2800pci_config_erp,
++ .config_ant = rt2800pci_config_ant,
++ .config = rt2800pci_config,
++};
++
++static const struct data_queue_desc rt2800pci_queue_rx = {
++ .entry_num = RX_ENTRIES,
++ .data_size = AGGREGATION_SIZE,
++ .desc_size = RXD_DESC_SIZE,
++ .priv_size = sizeof(struct queue_entry_priv_pci),
++};
++
++static const struct data_queue_desc rt2800pci_queue_tx = {
++ .entry_num = TX_ENTRIES,
++ .data_size = AGGREGATION_SIZE,
++ .desc_size = TXD_DESC_SIZE,
++ .priv_size = sizeof(struct queue_entry_priv_pci),
++};
++
++static const struct data_queue_desc rt2800pci_queue_bcn = {
++ .entry_num = 8 * BEACON_ENTRIES,
++ .data_size = 0, /* No DMA required for beacons */
++ .desc_size = TXWI_DESC_SIZE,
++ .priv_size = sizeof(struct queue_entry_priv_pci),
++};
++
++static const struct rt2x00_ops rt2800pci_ops = {
++ .name = KBUILD_MODNAME,
++ .max_sta_intf = 1,
++ .max_ap_intf = 8,
++ .eeprom_size = EEPROM_SIZE,
++ .rf_size = RF_SIZE,
++ .tx_queues = NUM_TX_QUEUES,
++ .rx = &rt2800pci_queue_rx,
++ .tx = &rt2800pci_queue_tx,
++ .bcn = &rt2800pci_queue_bcn,
++ .lib = &rt2800pci_rt2x00_ops,
++ .hw = &rt2800pci_mac80211_ops,
++#ifdef CONFIG_RT2X00_LIB_DEBUGFS
++ .debugfs = &rt2800pci_rt2x00debug,
++#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
++};
++
++/*
++ * RT2800pci module information.
++ */
++static struct pci_device_id rt2800pci_device_table[] = {
++ /* Edimax */
++ { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ /* Awt */
++ { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
++ { 0, }
++};
++
++MODULE_AUTHOR(DRV_PROJECT);
++MODULE_VERSION(DRV_VERSION);
++MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
++MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
++#ifdef CONFIG_RT2800PCI_PCI
++MODULE_FIRMWARE(FIRMWARE_RT2860);
++MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
++#endif /* CONFIG_RT2800PCI_PCI */
++MODULE_LICENSE("GPL");
++
++#ifdef CONFIG_RT2800PCI_WISOC
++#if defined(CONFIG_RALINK_RT288X)
++__rt2x00soc_probe(RT2880, &rt2800pci_ops);
++#elif defined(CONFIG_RALINK_RT305X)
++__rt2x00soc_probe(RT3052, &rt2800pci_ops);
++#endif
++
++static struct platform_driver rt2800soc_driver = {
++ .driver = {
++ .name = "rt2800_wmac",
++ .owner = THIS_MODULE,
++ .mod_name = KBUILD_MODNAME,
++ },
++ .probe = __rt2x00soc_probe,
++ .remove = __devexit_p(rt2x00soc_remove),
++ .suspend = rt2x00soc_suspend,
++ .resume = rt2x00soc_resume,
++};
++#endif /* CONFIG_RT2800PCI_WISOC */
++
++#ifdef CONFIG_RT2800PCI_PCI
++static struct pci_driver rt2800pci_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = rt2800pci_device_table,
++ .probe = rt2x00pci_probe,
++ .remove = __devexit_p(rt2x00pci_remove),
++ .suspend = rt2x00pci_suspend,
++ .resume = rt2x00pci_resume,
++};
++#endif /* CONFIG_RT2800PCI_PCI */
++
++static int __init rt2800pci_init(void)
++{
++ int ret = 0;
++
++#ifdef CONFIG_RT2800PCI_WISOC
++ ret = platform_driver_register(&rt2800soc_driver);
++ if (ret)
++ return ret;
++#endif
++#ifdef CONFIG_RT2800PCI_PCI
++ ret = pci_register_driver(&rt2800pci_driver);
++ if (ret) {
++#ifdef CONFIG_RT2800PCI_WISOC
++ platform_driver_unregister(&rt2800soc_driver);
++#endif
++ return ret;
++ }
++#endif
++
++ return ret;
++}
++
++static void __exit rt2800pci_exit(void)
++{
++#ifdef CONFIG_RT2800PCI_PCI
++ pci_unregister_driver(&rt2800pci_driver);
++#endif
++#ifdef CONFIG_RT2800PCI_WISOC
++ platform_driver_unregister(&rt2800soc_driver);
++#endif
++}
++
++module_init(rt2800pci_init);
++module_exit(rt2800pci_exit);
+--- /dev/null
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -0,0 +1,1927 @@
++/*
++ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
++ <http://rt2x00.serialmonkey.com>
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the
++ Free Software Foundation, Inc.,
++ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++/*
++ Module: rt2800pci
++ Abstract: Data structures and registers for the rt2800pci module.
++ Supported chipsets: RT2800E & RT2800ED.
++ */
++
++#ifndef RT2800PCI_H
++#define RT2800PCI_H
++
++/*
++ * RF chip defines.
++ *
++ * RF2820 2.4G 2T3R
++ * RF2850 2.4G/5G 2T3R
++ * RF2720 2.4G 1T2R
++ * RF2750 2.4G/5G 1T2R
++ * RF3020 2.4G 1T1R
++ * RF2020 2.4G B/G
++ * RF3021 2.4G 1T2R
++ * RF3022 2.4G 2T2R
++ */
++#define RF2820 0x0001
++#define RF2850 0x0002
++#define RF2720 0x0003
++#define RF2750 0x0004
++#define RF3020 0x0005
++#define RF2020 0x0006
++#define RF3021 0x0007
++#define RF3022 0x0008
++
++/*
++ * RT2860 version
++ */
++#define RT2860C_VERSION 0x28600100
++#define RT2860D_VERSION 0x28600101
++#define RT2880E_VERSION 0x28720200
++#define RT2883_VERSION 0x28830300
++#define RT3070_VERSION 0x30700200
++
++/*
++ * Signal information.
++ * Defaul offset is required for RSSI <-> dBm conversion.
++ */
++#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
++
++/*
++ * Register layout information.
++ */
++#define CSR_REG_BASE 0x1000
++#define CSR_REG_SIZE 0x0800
++#define EEPROM_BASE 0x0000
++#define EEPROM_SIZE 0x0110
++#define BBP_BASE 0x0000
++#define BBP_SIZE 0x0080
++#define RF_BASE 0x0004
++#define RF_SIZE 0x0010
++
++/*
++ * Number of TX queues.
++ */
++#define NUM_TX_QUEUES 4
++
++/*
++ * PCI registers.
++ */
++
++/*
++ * E2PROM_CSR: EEPROM control register.
++ * RELOAD: Write 1 to reload eeprom content.
++ * TYPE: 0: 93c46, 1:93c66.
++ * LOAD_STATUS: 1:loading, 0:done.
++ */
++#define E2PROM_CSR 0x0004
++#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
++#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
++#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
++#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
++#define E2PROM_CSR_TYPE FIELD32(0x00000030)
++#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
++#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
++
++/*
++ * HOST-MCU shared memory
++ */
++#define HOST_CMD_CSR 0x0404
++#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
++
++/*
++ * INT_SOURCE_CSR: Interrupt source register.
++ * Write one to clear corresponding bit.
++ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
++ */
++#define INT_SOURCE_CSR 0x0200
++#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001)
++#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002)
++#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004)
++#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008)
++#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010)
++#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020)
++#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040)
++#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
++#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
++#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200)
++#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400)
++#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800)
++#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000)
++#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
++#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000)
++#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000)
++#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000)
++#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000)
++
++/*
++ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
++ */
++#define INT_MASK_CSR 0x0204
++#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001)
++#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002)
++#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004)
++#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008)
++#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010)
++#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020)
++#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040)
++#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
++#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
++#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200)
++#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400)
++#define INT_MASK_CSR_TBTT FIELD32(0x00000800)
++#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000)
++#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
++#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000)
++#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000)
++#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000)
++#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000)
++
++/*
++ * WPDMA_GLO_CFG
++ */
++#define WPDMA_GLO_CFG 0x0208
++#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001)
++#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002)
++#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004)
++#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008)
++#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
++#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
++#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080)
++#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00)
++#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000)
++
++/*
++ * WPDMA_RST_IDX
++ */
++#define WPDMA_RST_IDX 0x020c
++#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001)
++#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002)
++#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004)
++#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008)
++#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010)
++#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020)
++#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000)
++
++/*
++ * DELAY_INT_CFG
++ */
++#define DELAY_INT_CFG 0x0210
++#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff)
++#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00)
++#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000)
++#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000)
++#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000)
++#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000)
++
++/*
++ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
++ * AIFSN0: AC_BE
++ * AIFSN1: AC_BK
++ * AIFSN1: AC_VI
++ * AIFSN1: AC_VO
++ */
++#define WMM_AIFSN_CFG 0x0214
++#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
++#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0)
++#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00)
++#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000)
++
++/*
++ * WMM_CWMIN_CSR: CWmin for each EDCA AC
++ * CWMIN0: AC_BE
++ * CWMIN1: AC_BK
++ * CWMIN1: AC_VI
++ * CWMIN1: AC_VO
++ */
++#define WMM_CWMIN_CFG 0x0218
++#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
++#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0)
++#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00)
++#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000)
++
++/*
++ * WMM_CWMAX_CSR: CWmax for each EDCA AC
++ * CWMAX0: AC_BE
++ * CWMAX1: AC_BK
++ * CWMAX1: AC_VI
++ * CWMAX1: AC_VO
++ */
++#define WMM_CWMAX_CFG 0x021c
++#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
++#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0)
++#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00)
++#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
++
++/*
++ * AC_TXOP0: AC_BK/AC_BE TXOP register
++ * AC0TXOP: AC_BK in unit of 32us
++ * AC1TXOP: AC_BE in unit of 32us
++ */
++#define WMM_TXOP0_CFG 0x0220
++#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
++#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
++
++/*
++ * AC_TXOP1: AC_VO/AC_VI TXOP register
++ * AC2TXOP: AC_VI in unit of 32us
++ * AC3TXOP: AC_VO in unit of 32us
++ */
++#define WMM_TXOP1_CFG 0x0224
++#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
++#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
++
++/*
++ * GPIO_CTRL_CFG:
++ */
++#define GPIO_CTRL_CFG 0x0228
++#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001)
++#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002)
++#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004)
++#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008)
++#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010)
++#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020)
++#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040)
++#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080)
++#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100)
++
++/*
++ * MCU_CMD_CFG
++ */
++#define MCU_CMD_CFG 0x022c
++
++/*
++ * AC_BK register offsets
++ */
++#define TX_BASE_PTR0 0x0230
++#define TX_MAX_CNT0 0x0234
++#define TX_CTX_IDX0 0x0238
++#define TX_DTX_IDX0 0x023c
++
++/*
++ * AC_BE register offsets
++ */
++#define TX_BASE_PTR1 0x0240
++#define TX_MAX_CNT1 0x0244
++#define TX_CTX_IDX1 0x0248
++#define TX_DTX_IDX1 0x024c
++
++/*
++ * AC_VI register offsets
++ */
++#define TX_BASE_PTR2 0x0250
++#define TX_MAX_CNT2 0x0254
++#define TX_CTX_IDX2 0x0258
++#define TX_DTX_IDX2 0x025c
++
++/*
++ * AC_VO register offsets
++ */
++#define TX_BASE_PTR3 0x0260
++#define TX_MAX_CNT3 0x0264
++#define TX_CTX_IDX3 0x0268
++#define TX_DTX_IDX3 0x026c
++
++/*
++ * HCCA register offsets
++ */
++#define TX_BASE_PTR4 0x0270
++#define TX_MAX_CNT4 0x0274
++#define TX_CTX_IDX4 0x0278
++#define TX_DTX_IDX4 0x027c
++
++/*
++ * MGMT register offsets
++ */
++#define TX_BASE_PTR5 0x0280
++#define TX_MAX_CNT5 0x0284
++#define TX_CTX_IDX5 0x0288
++#define TX_DTX_IDX5 0x028c
++
++/*
++ * Queue register offset macros
++ */
++#define TX_QUEUE_REG_OFFSET 0x10
++#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
++#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
++#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
++#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
++
++/*
++ * RX register offsets
++ */
++#define RX_BASE_PTR 0x0290
++#define RX_MAX_CNT 0x0294
++#define RX_CRX_IDX 0x0298
++#define RX_DRX_IDX 0x029c
++
++/*
++ * PBF_SYS_CTRL
++ * HOST_RAM_WRITE: enable Host program ram write selection
++ */
++#define PBF_SYS_CTRL 0x0400
++#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
++#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
++
++/*
++ * PBF registers
++ * Most are for debug. Driver doesn't touch PBF register.
++ */
++#define PBF_CFG 0x0408
++#define PBF_MAX_PCNT 0x040c
++#define PBF_CTRL 0x0410
++#define PBF_INT_STA 0x0414
++#define PBF_INT_ENA 0x0418
++
++/*
++ * BCN_OFFSET0:
++ */
++#define BCN_OFFSET0 0x042c
++#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff)
++#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00)
++#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000)
++#define BCN_OFFSET0_BCN3 FIELD32(0xff000000)
++
++/*
++ * BCN_OFFSET1:
++ */
++#define BCN_OFFSET1 0x0430
++#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff)
++#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00)
++#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000)
++#define BCN_OFFSET1_BCN7 FIELD32(0xff000000)
++
++/*
++ * PBF registers
++ * Most are for debug. Driver doesn't touch PBF register.
++ */
++#define TXRXQ_PCNT 0x0438
++#define PBF_DBG 0x043c
++
++/*
++ * RF registers
++ */
++#define RF_CSR_CFG 0x0500
++#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
++
++/*
++ * MAC Control/Status Registers(CSR).
++ * Some values are set in TU, whereas 1 TU == 1024 us.
++ */
++
++/*
++ * MAC_CSR0: ASIC revision number.
++ * ASIC_REV: 0
++ * ASIC_VER: 2860
++ */
++#define MAC_CSR0 0x1000
++#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff)
++#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000)
++
++/*
++ * MAC_SYS_CTRL:
++ */
++#define MAC_SYS_CTRL 0x1004
++#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001)
++#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002)
++#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004)
++#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008)
++#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010)
++#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020)
++#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040)
++#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080)
++
++/*
++ * MAC_ADDR_DW0: STA MAC register 0
++ */
++#define MAC_ADDR_DW0 0x1008
++#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff)
++#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00)
++#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000)
++#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000)
++
++/*
++ * MAC_ADDR_DW1: STA MAC register 1
++ * UNICAST_TO_ME_MASK:
++ * Used to mask off bits from byte 5 of the MAC address
++ * to determine the UNICAST_TO_ME bit for RX frames.
++ * The full mask is complemented by BSS_ID_MASK:
++ * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
++ */
++#define MAC_ADDR_DW1 0x100c
++#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff)
++#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00)
++#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
++
++/*
++ * MAC_BSSID_DW0: BSSID register 0
++ */
++#define MAC_BSSID_DW0 0x1010
++#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff)
++#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00)
++#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000)
++#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000)
++
++/*
++ * MAC_BSSID_DW1: BSSID register 1
++ * BSS_ID_MASK:
++ * 0: 1-BSSID mode (BSS index = 0)
++ * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
++ * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
++ * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
++ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
++ * BSSID. This will make sure that those bits will be ignored
++ * when determining the MY_BSS of RX frames.
++ */
++#define MAC_BSSID_DW1 0x1014
++#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff)
++#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00)
++#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000)
++#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000)
++
++/*
++ * MAX_LEN_CFG: Maximum frame length register.
++ * MAX_MPDU: rt2860b max 16k bytes
++ * MAX_PSDU: Maximum PSDU length
++ * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
++ */
++#define MAX_LEN_CFG 0x1018
++#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff)
++#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000)
++#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000)
++#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000)
++
++/*
++ * BBP_CSR_CFG: BBP serial control register
++ * VALUE: Register value to program into BBP
++ * REG_NUM: Selected BBP register
++ * READ_CONTROL: 0 write BBP, 1 read BBP
++ * BUSY: ASIC is busy executing BBP commands
++ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
++ * BBP_RW_MODE: 0 serial, 1 paralell
++ */
++#define BBP_CSR_CFG 0x101c
++#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
++#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00)
++#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000)
++#define BBP_CSR_CFG_BUSY FIELD32(0x00020000)
++#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000)
++#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000)
++
++/*
++ * RF_CSR_CFG0: RF control register
++ * REGID_AND_VALUE: Register value to program into RF
++ * BITWIDTH: Selected RF register
++ * STANDBYMODE: 0 high when standby, 1 low when standby
++ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
++ * BUSY: ASIC is busy executing RF commands
++ */
++#define RF_CSR_CFG0 0x1020
++#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff)
++#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000)
++#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff)
++#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000)
++#define RF_CSR_CFG0_SEL FIELD32(0x40000000)
++#define RF_CSR_CFG0_BUSY FIELD32(0x80000000)
++
++/*
++ * RF_CSR_CFG1: RF control register
++ * REGID_AND_VALUE: Register value to program into RF
++ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
++ * 0: 3 system clock cycle (37.5usec)
++ * 1: 5 system clock cycle (62.5usec)
++ */
++#define RF_CSR_CFG1 0x1024
++#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff)
++#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000)
++
++/*
++ * RF_CSR_CFG2: RF control register
++ * VALUE: Register value to program into RF
++ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
++ * 0: 3 system clock cycle (37.5usec)
++ * 1: 5 system clock cycle (62.5usec)
++ */
++#define RF_CSR_CFG2 0x1028
++#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff)
++
++/*
++ * LED_CFG: LED control
++ * color LED's:
++ * 0: off
++ * 1: blinking upon TX2
++ * 2: periodic slow blinking
++ * 3: always on
++ * LED polarity:
++ * 0: active low
++ * 1: active high
++ */
++#define LED_CFG 0x102c
++#define LED_CFG_ON_PERIOD FIELD32(0x000000ff)
++#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00)
++#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000)
++#define LED_CFG_R_LED_MODE FIELD32(0x03000000)
++#define LED_CFG_G_LED_MODE FIELD32(0x0c000000)
++#define LED_CFG_Y_LED_MODE FIELD32(0x30000000)
++#define LED_CFG_LED_POLAR FIELD32(0x40000000)
++
++/*
++ * XIFS_TIME_CFG: MAC timing
++ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
++ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
++ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
++ * when MAC doesn't reference BBP signal BBRXEND
++ * EIFS: unit 1us
++ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
++ *
++ */
++#define XIFS_TIME_CFG 0x1100
++#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff)
++#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00)
++#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000)
++#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000)
++#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000)
++
++/*
++ * BKOFF_SLOT_CFG:
++ */
++#define BKOFF_SLOT_CFG 0x1104
++#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff)
++#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00)
++
++/*
++ * NAV_TIME_CFG:
++ */
++#define NAV_TIME_CFG 0x1108
++#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff)
++#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00)
++#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000)
++#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000)
++
++/*
++ * CH_TIME_CFG: count as channel busy
++ */
++#define CH_TIME_CFG 0x110c
++
++/*
++ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
++ */
++#define PBF_LIFE_TIMER 0x1110
++
++/*
++ * BCN_TIME_CFG:
++ * BEACON_INTERVAL: in unit of 1/16 TU
++ * TSF_TICKING: Enable TSF auto counting
++ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
++ * BEACON_GEN: Enable beacon generator
++ */
++#define BCN_TIME_CFG 0x1114
++#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff)
++#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000)
++#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000)
++#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000)
++#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000)
++#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)
++
++/*
++ * TBTT_SYNC_CFG:
++ */
++#define TBTT_SYNC_CFG 0x1118
++
++/*
++ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
++ */
++#define TSF_TIMER_DW0 0x111c
++#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff)
++
++/*
++ * TSF_TIMER_DW1: Local msb TSF timer, read-only
++ */
++#define TSF_TIMER_DW1 0x1120
++#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff)
++
++/*
++ * TBTT_TIMER: TImer remains till next TBTT, read-only
++ */
++#define TBTT_TIMER 0x1124
++
++/*
++ * INT_TIMER_CFG:
++ */
++#define INT_TIMER_CFG 0x1128
++
++/*
++ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
++ */
++#define INT_TIMER_EN 0x112c
++
++/*
++ * CH_IDLE_STA: channel idle time
++ */
++#define CH_IDLE_STA 0x1130
++
++/*
++ * CH_BUSY_STA: channel busy time
++ */
++#define CH_BUSY_STA 0x1134
++
++/*
++ * MAC_STATUS_CFG:
++ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
++ * if 1 or higher one of the 2 registers is busy.
++ */
++#define MAC_STATUS_CFG 0x1200
++#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
++
++/*
++ * PWR_PIN_CFG:
++ */
++#define PWR_PIN_CFG 0x1204
++
++/*
++ * AUTOWAKEUP_CFG: Manual power control / status register
++ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
++ * AUTOWAKE: 0:sleep, 1:awake
++ */
++#define AUTOWAKEUP_CFG 0x1208
++#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff)
++#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
++#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
++
++/*
++ * EDCA_AC0_CFG:
++ */
++#define EDCA_AC0_CFG 0x1300
++#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
++#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
++#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
++
++/*
++ * EDCA_AC1_CFG:
++ */
++#define EDCA_AC1_CFG 0x1304
++#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
++#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
++#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
++
++/*
++ * EDCA_AC2_CFG:
++ */
++#define EDCA_AC2_CFG 0x1308
++#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
++#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
++#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
++
++/*
++ * EDCA_AC3_CFG:
++ */
++#define EDCA_AC3_CFG 0x130c
++#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
++#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
++#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
++#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
++
++/*
++ * EDCA_TID_AC_MAP:
++ */
++#define EDCA_TID_AC_MAP 0x1310
++
++/*
++ * TX_PWR_CFG_0:
++ */
++#define TX_PWR_CFG_0 0x1314
++#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f)
++#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0)
++#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00)
++#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000)
++#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000)
++#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
++#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
++#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
++
++/*
++ * TX_PWR_CFG_1:
++ */
++#define TX_PWR_CFG_1 0x1318
++#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f)
++#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0)
++#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00)
++#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000)
++#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000)
++#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
++#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
++#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
++
++/*
++ * TX_PWR_CFG_2:
++ */
++#define TX_PWR_CFG_2 0x131c
++#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f)
++#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0)
++#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00)
++#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000)
++#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000)
++#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
++#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
++#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
++
++/*
++ * TX_PWR_CFG_3:
++ */
++#define TX_PWR_CFG_3 0x1320
++#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f)
++#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0)
++#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00)
++#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000)
++#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000)
++#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000)
++#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000)
++#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000)
++
++/*
++ * TX_PWR_CFG_4:
++ */
++#define TX_PWR_CFG_4 0x1324
++#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f)
++#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0)
++#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
++#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
++
++/*
++ * TX_PIN_CFG:
++ */
++#define TX_PIN_CFG 0x1328
++#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
++#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
++#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
++#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008)
++#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010)
++#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020)
++#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040)
++#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080)
++#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100)
++#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200)
++#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400)
++#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800)
++#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000)
++#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000)
++#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000)
++#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000)
++#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000)
++#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
++#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
++#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
++
++/*
++ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
++ */
++#define TX_BAND_CFG 0x132c
++#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001)
++#define TX_BAND_CFG_A FIELD32(0x00000002)
++#define TX_BAND_CFG_BG FIELD32(0x00000004)
++
++/*
++ * TX_SW_CFG0:
++ */
++#define TX_SW_CFG0 0x1330
++
++/*
++ * TX_SW_CFG1:
++ */
++#define TX_SW_CFG1 0x1334
++
++/*
++ * TX_SW_CFG2:
++ */
++#define TX_SW_CFG2 0x1338
++
++/*
++ * TXOP_THRES_CFG:
++ */
++#define TXOP_THRES_CFG 0x133c
++
++/*
++ * TXOP_CTRL_CFG:
++ */
++#define TXOP_CTRL_CFG 0x1340
++
++/*
++ * TX_RTS_CFG:
++ * RTS_THRES: unit:byte
++ * RTS_FBK_EN: enable rts rate fallback
++ */
++#define TX_RTS_CFG 0x1344
++#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
++#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00)
++#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000)
++
++/*
++ * TX_TIMEOUT_CFG:
++ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
++ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
++ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
++ * it is recommended that:
++ * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
++ */
++#define TX_TIMEOUT_CFG 0x1348
++#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0)
++#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00)
++#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000)
++
++/*
++ * TX_RTY_CFG:
++ * SHORT_RTY_LIMIT: short retry limit
++ * LONG_RTY_LIMIT: long retry limit
++ * LONG_RTY_THRE: Long retry threshoold
++ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
++ * 0:expired by retry limit, 1: expired by mpdu life timer
++ * AGG_RTY_MODE: Aggregate MPDU retry mode
++ * 0:expired by retry limit, 1: expired by mpdu life timer
++ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
++ */
++#define TX_RTY_CFG 0x134c
++#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff)
++#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00)
++#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000)
++#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000)
++#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000)
++#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000)
++
++/*
++ * TX_LINK_CFG:
++ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
++ * MFB_ENABLE: TX apply remote MFB 1:enable
++ * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable
++ * 0: not apply remote remote unsolicit (MFS=7)
++ * TX_MRQ_EN: MCS request TX enable
++ * TX_RDG_EN: RDG TX enable
++ * TX_CF_ACK_EN: Piggyback CF-ACK enable
++ * REMOTE_MFB: remote MCS feedback
++ * REMOTE_MFS: remote MCS feedback sequence number
++ */
++#define TX_LINK_CFG 0x1350
++#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
++#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100)
++#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200)
++#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400)
++#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800)
++#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000)
++#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000)
++#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000)
++
++/*
++ * HT_FBK_CFG0:
++ */
++#define HT_FBK_CFG0 0x1354
++#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f)
++#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0)
++#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00)
++#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000)
++#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000)
++#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000)
++#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000)
++#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000)
++
++/*
++ * HT_FBK_CFG1:
++ */
++#define HT_FBK_CFG1 0x1358
++#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f)
++#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0)
++#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00)
++#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000)
++#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000)
++#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000)
++#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000)
++#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000)
++
++/*
++ * LG_FBK_CFG0:
++ */
++#define LG_FBK_CFG0 0x135c
++#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f)
++#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0)
++#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00)
++#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000)
++#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000)
++#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000)
++#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000)
++#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000)
++
++/*
++ * LG_FBK_CFG1:
++ */
++#define LG_FBK_CFG1 0x1360
++#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f)
++#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0)
++#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00)
++#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000)
++
++/*
++ * CCK_PROT_CFG: CCK Protection
++ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
++ * PROTECT_CTRL: Protection control frame type for CCK TX
++ * 0:none, 1:RTS/CTS, 2:CTS-to-self
++ * PROTECT_NAV: TXOP protection type for CCK TX
++ * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect
++ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
++ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
++ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
++ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
++ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
++ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
++ * RTS_TH_EN: RTS threshold enable on CCK TX
++ */
++#define CCK_PROT_CFG 0x1364
++#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
++#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
++#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
++#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
++#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
++#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
++#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
++#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
++#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
++#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
++
++/*
++ * OFDM_PROT_CFG: OFDM Protection
++ */
++#define OFDM_PROT_CFG 0x1368
++#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
++#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
++#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
++#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
++#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
++#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
++#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
++#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
++#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
++#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
++
++/*
++ * MM20_PROT_CFG: MM20 Protection
++ */
++#define MM20_PROT_CFG 0x136c
++#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
++#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
++#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
++#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
++#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
++#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
++#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
++#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
++#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
++#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
++
++/*
++ * MM40_PROT_CFG: MM40 Protection
++ */
++#define MM40_PROT_CFG 0x1370
++#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
++#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
++#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
++#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
++#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
++#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
++#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
++#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
++#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
++#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
++
++/*
++ * GF20_PROT_CFG: GF20 Protection
++ */
++#define GF20_PROT_CFG 0x1374
++#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
++#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
++#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
++#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
++#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
++#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
++#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
++#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
++#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
++#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
++
++/*
++ * GF40_PROT_CFG: GF40 Protection
++ */
++#define GF40_PROT_CFG 0x1378
++#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
++#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
++#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
++#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
++#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
++#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
++#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
++#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
++#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
++#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
++
++/*
++ * EXP_CTS_TIME:
++ */
++#define EXP_CTS_TIME 0x137c
++
++/*
++ * EXP_ACK_TIME:
++ */
++#define EXP_ACK_TIME 0x1380
++
++/*
++ * RX_FILTER_CFG: RX configuration register.
++ */
++#define RX_FILTER_CFG 0x1400
++#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001)
++#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002)
++#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004)
++#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008)
++#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010)
++#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020)
++#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040)
++#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080)
++#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100)
++#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200)
++#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400)
++#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800)
++#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000)
++#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000)
++#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000)
++#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000)
++#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000)
++
++/*
++ * AUTO_RSP_CFG:
++ * AUTORESPONDER: 0: disable, 1: enable
++ * BAC_ACK_POLICY: 0:long, 1:short preamble
++ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
++ * CTS_40_MREF: Response CTS 40MHz duplicate mode
++ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
++ * DUAL_CTS_EN: Power bit value in control frame
++ * ACK_CTS_PSM_BIT:Power bit value in control frame
++ */
++#define AUTO_RSP_CFG 0x1404
++#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001)
++#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002)
++#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004)
++#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008)
++#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010)
++#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040)
++#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080)
++
++/*
++ * LEGACY_BASIC_RATE:
++ */
++#define LEGACY_BASIC_RATE 0x1408
++
++/*
++ * HT_BASIC_RATE:
++ */
++#define HT_BASIC_RATE 0x140c
++
++/*
++ * HT_CTRL_CFG:
++ */
++#define HT_CTRL_CFG 0x1410
++
++/*
++ * SIFS_COST_CFG:
++ */
++#define SIFS_COST_CFG 0x1414
++
++/*
++ * RX_PARSER_CFG:
++ * Set NAV for all received frames
++ */
++#define RX_PARSER_CFG 0x1418
++
++/*
++ * TX_SEC_CNT0:
++ */
++#define TX_SEC_CNT0 0x1500
++
++/*
++ * RX_SEC_CNT0:
++ */
++#define RX_SEC_CNT0 0x1504
++
++/*
++ * CCMP_FC_MUTE:
++ */
++#define CCMP_FC_MUTE 0x1508
++
++/*
++ * TXOP_HLDR_ADDR0:
++ */
++#define TXOP_HLDR_ADDR0 0x1600
++
++/*
++ * TXOP_HLDR_ADDR1:
++ */
++#define TXOP_HLDR_ADDR1 0x1604
++
++/*
++ * TXOP_HLDR_ET:
++ */
++#define TXOP_HLDR_ET 0x1608
++
++/*
++ * QOS_CFPOLL_RA_DW0:
++ */
++#define QOS_CFPOLL_RA_DW0 0x160c
++
++/*
++ * QOS_CFPOLL_RA_DW1:
++ */
++#define QOS_CFPOLL_RA_DW1 0x1610
++
++/*
++ * QOS_CFPOLL_QC:
++ */
++#define QOS_CFPOLL_QC 0x1614
++
++/*
++ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
++ */
++#define RX_STA_CNT0 0x1700
++#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff)
++#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000)
++
++/*
++ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
++ */
++#define RX_STA_CNT1 0x1704
++#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff)
++#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000)
++
++/*
++ * RX_STA_CNT2:
++ */
++#define RX_STA_CNT2 0x1708
++#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff)
++#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000)
++
++/*
++ * TX_STA_CNT0: TX Beacon count
++ */
++#define TX_STA_CNT0 0x170c
++#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff)
++#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_STA_CNT1: TX tx count
++ */
++#define TX_STA_CNT1 0x1710
++#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff)
++#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000)
++
++/*
++ * TX_STA_CNT2: TX tx count
++ */
++#define TX_STA_CNT2 0x1714
++#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff)
++#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_STA_FIFO: TX Result for specific PID status fifo register
++ */
++#define TX_STA_FIFO 0x1718
++#define TX_STA_FIFO_VALID FIELD32(0x00000001)
++#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e)
++#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020)
++#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040)
++#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080)
++#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
++#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT: Debug counter
++ */
++#define TX_AGG_CNT 0x171c
++#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT0:
++ */
++#define TX_AGG_CNT0 0x1720
++#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT1:
++ */
++#define TX_AGG_CNT1 0x1724
++#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT2:
++ */
++#define TX_AGG_CNT2 0x1728
++#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT3:
++ */
++#define TX_AGG_CNT3 0x172c
++#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT4:
++ */
++#define TX_AGG_CNT4 0x1730
++#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT5:
++ */
++#define TX_AGG_CNT5 0x1734
++#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT6:
++ */
++#define TX_AGG_CNT6 0x1738
++#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000)
++
++/*
++ * TX_AGG_CNT7:
++ */
++#define TX_AGG_CNT7 0x173c
++#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff)
++#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000)
++
++/*
++ * MPDU_DENSITY_CNT:
++ * TX_ZERO_DEL: TX zero length delimiter count
++ * RX_ZERO_DEL: RX zero length delimiter count
++ */
++#define MPDU_DENSITY_CNT 0x1740
++#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff)
++#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000)
++
++/*
++ * Security key table memory.
++ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
++ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
++ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
++ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
++ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
++ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
++ */
++#define MAC_WCID_BASE 0x1800
++#define PAIRWISE_KEY_TABLE_BASE 0x4000
++#define MAC_IVEIV_TABLE_BASE 0x6000
++#define MAC_WCID_ATTRIBUTE_BASE 0x6800
++#define SHARED_KEY_TABLE_BASE 0x6c00
++#define SHARED_KEY_MODE_BASE 0x7000
++
++#define MAC_WCID_ENTRY(__idx) \
++ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
++#define PAIRWISE_KEY_ENTRY(__idx) \
++ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
++#define MAC_IVEIV_ENTRY(__idx) \
++ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
++#define MAC_WCID_ATTR_ENTRY(__idx) \
++ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
++#define SHARED_KEY_ENTRY(__idx) \
++ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
++#define SHARED_KEY_MODE_ENTRY(__idx) \
++ ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
++
++struct mac_wcid_entry {
++ u8 mac[6];
++ u8 reserved[2];
++} __attribute__ ((packed));
++
++struct hw_key_entry {
++ u8 key[16];
++ u8 tx_mic[8];
++ u8 rx_mic[8];
++} __attribute__ ((packed));
++
++struct mac_iveiv_entry {
++ u8 iv[8];
++} __attribute__ ((packed));
++
++/*
++ * MAC_WCID_ATTRIBUTE:
++ */
++#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001)
++#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
++#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
++#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
++
++/*
++ * SHARED_KEY_MODE:
++ */
++#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007)
++#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070)
++#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700)
++#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000)
++#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000)
++#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000)
++#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000)
++#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000)
++
++/*
++ * HOST-MCU communication
++ */
++
++/*
++ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
++ */
++#define H2M_MAILBOX_CSR 0x7010
++#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
++#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
++#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
++#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
++
++/*
++ * H2M_MAILBOX_CID:
++ */
++#define H2M_MAILBOX_CID 0x7014
++#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
++#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00)
++#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000)
++#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000)
++
++/*
++ * H2M_MAILBOX_STATUS:
++ */
++#define H2M_MAILBOX_STATUS 0x701c
++
++/*
++ * H2M_INT_SRC:
++ */
++#define H2M_INT_SRC 0x7024
++
++/*
++ * H2M_BBP_AGENT:
++ */
++#define H2M_BBP_AGENT 0x7028
++
++/*
++ * MCU_LEDCS: LED control for MCU Mailbox.
++ */
++#define MCU_LEDCS_LED_MODE FIELD8(0x1f)
++#define MCU_LEDCS_POLARITY FIELD8(0x01)
++
++/*
++ * HW_CS_CTS_BASE:
++ * Carrier-sense CTS frame base address.
++ * It's where mac stores carrier-sense frame for carrier-sense function.
++ */
++#define HW_CS_CTS_BASE 0x7700
++
++/*
++ * HW_DFS_CTS_BASE:
++ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
++ */
++#define HW_DFS_CTS_BASE 0x7780
++
++/*
++ * TXRX control registers - base address 0x3000
++ */
++
++/*
++ * TXRX_CSR1:
++ * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
++ */
++#define TXRX_CSR1 0x77d0
++
++/*
++ * HW_DEBUG_SETTING_BASE:
++ * since NULL frame won't be that long (256 byte)
++ * We steal 16 tail bytes to save debugging settings
++ */
++#define HW_DEBUG_SETTING_BASE 0x77f0
++#define HW_DEBUG_SETTING_BASE2 0x7770
++
++/*
++ * HW_BEACON_BASE
++ * In order to support maximum 8 MBSS and its maximum length
++ * is 512 bytes for each beacon
++ * Three section discontinue memory segments will be used.
++ * 1. The original region for BCN 0~3
++ * 2. Extract memory from FCE table for BCN 4~5
++ * 3. Extract memory from Pair-wise key table for BCN 6~7
++ * It occupied those memory of wcid 238~253 for BCN 6
++ * and wcid 222~237 for BCN 7
++ *
++ * IMPORTANT NOTE: Not sure why legacy driver does this,
++ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
++ */
++#define HW_BEACON_BASE0 0x7800
++#define HW_BEACON_BASE1 0x7a00
++#define HW_BEACON_BASE2 0x7c00
++#define HW_BEACON_BASE3 0x7e00
++#define HW_BEACON_BASE4 0x7200
++#define HW_BEACON_BASE5 0x7400
++#define HW_BEACON_BASE6 0x5dc0
++#define HW_BEACON_BASE7 0x5bc0
++
++#define HW_BEACON_OFFSET(__index) \
++ ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
++ (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
++ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
++
++/*
++ * 8051 firmware image.
++ */
++#define FIRMWARE_RT2860 "rt2860.bin"
++#define FIRMWARE_IMAGE_BASE 0x2000
++
++/*
++ * BBP registers.
++ * The wordsize of the BBP is 8 bits.
++ */
++
++/*
++ * BBP 1: TX Antenna
++ */
++#define BBP1_TX_POWER FIELD8(0x07)
++#define BBP1_TX_ANTENNA FIELD8(0x18)
++
++/*
++ * BBP 3: RX Antenna
++ */
++#define BBP3_RX_ANTENNA FIELD8(0x18)
++#define BBP3_HT40_PLUS FIELD8(0x20)
++
++/*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_TX_BF FIELD8(0x01)
++#define BBP4_BANDWIDTH FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
++
++/*
++ * RF registers
++ */
++
++/*
++ * RF 2
++ */
++#define RF2_ANTENNA_RX2 FIELD32(0x00000040)
++#define RF2_ANTENNA_TX1 FIELD32(0x00004000)
++#define RF2_ANTENNA_RX1 FIELD32(0x00020000)
++
++/*
++ * RF 3
++ */
++#define RF3_TXPOWER_G FIELD32(0x00003e00)
++#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200)
++#define RF3_TXPOWER_A FIELD32(0x00003c00)
++
++/*
++ * RF 4
++ */
++#define RF4_TXPOWER_G FIELD32(0x000007c0)
++#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040)
++#define RF4_TXPOWER_A FIELD32(0x00000780)
++#define RF4_FREQ_OFFSET FIELD32(0x001f8000)
++#define RF4_HT40 FIELD32(0x00200000)
++
++/*
++ * EEPROM content.
++ * The wordsize of the EEPROM is 16 bits.
++ */
++
++/*
++ * EEPROM Version
++ */
++#define EEPROM_VERSION 0x0001
++#define EEPROM_VERSION_FAE FIELD16(0x00ff)
++#define EEPROM_VERSION_VERSION FIELD16(0xff00)
++
++/*
++ * HW MAC address.
++ */
++#define EEPROM_MAC_ADDR_0 0x0002
++#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
++#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
++#define EEPROM_MAC_ADDR_1 0x0003
++#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
++#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
++#define EEPROM_MAC_ADDR_2 0x0004
++#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
++#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
++
++/*
++ * EEPROM ANTENNA config
++ * RXPATH: 1: 1R, 2: 2R, 3: 3R
++ * TXPATH: 1: 1T, 2: 2T
++ */
++#define EEPROM_ANTENNA 0x001a
++#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f)
++#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0)
++#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00)
++
++/*
++ * EEPROM NIC config
++ * CARDBUS_ACCEL: 0 - enable, 1 - disable
++ */
++#define EEPROM_NIC 0x001b
++#define EEPROM_NIC_HW_RADIO FIELD16(0x0001)
++#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002)
++#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004)
++#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008)
++#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010)
++#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020)
++#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040)
++#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
++#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
++#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
++
++/*
++ * EEPROM frequency
++ */
++#define EEPROM_FREQ 0x001d
++#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
++#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
++#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
++
++/*
++ * EEPROM LED
++ * POLARITY_RDY_G: Polarity RDY_G setting.
++ * POLARITY_RDY_A: Polarity RDY_A setting.
++ * POLARITY_ACT: Polarity ACT setting.
++ * POLARITY_GPIO_0: Polarity GPIO0 setting.
++ * POLARITY_GPIO_1: Polarity GPIO1 setting.
++ * POLARITY_GPIO_2: Polarity GPIO2 setting.
++ * POLARITY_GPIO_3: Polarity GPIO3 setting.
++ * POLARITY_GPIO_4: Polarity GPIO4 setting.
++ * LED_MODE: Led mode.
++ */
++#define EEPROM_LED1 0x001e
++#define EEPROM_LED2 0x001f
++#define EEPROM_LED3 0x0020
++#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
++#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
++#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
++#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
++#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
++#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
++#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
++#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
++#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
++
++/*
++ * EEPROM LNA
++ */
++#define EEPROM_LNA 0x0022
++#define EEPROM_LNA_BG FIELD16(0x00ff)
++#define EEPROM_LNA_A0 FIELD16(0xff00)
++
++/*
++ * EEPROM RSSI BG offset
++ */
++#define EEPROM_RSSI_BG 0x0023
++#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
++#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
++
++/*
++ * EEPROM RSSI BG2 offset
++ */
++#define EEPROM_RSSI_BG2 0x0024
++#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
++#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
++
++/*
++ * EEPROM RSSI A offset
++ */
++#define EEPROM_RSSI_A 0x0025
++#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
++#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
++
++/*
++ * EEPROM RSSI A2 offset
++ */
++#define EEPROM_RSSI_A2 0x0026
++#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
++#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
++
++/*
++ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
++ * This is delta in 40MHZ.
++ * VALUE: Tx Power dalta value (MAX=4)
++ * TYPE: 1: Plus the delta value, 0: minus the delta value
++ * TXPOWER: Enable:
++ */
++#define EEPROM_TXPOWER_DELTA 0x0028
++#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f)
++#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040)
++#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080)
++
++/*
++ * EEPROM TXPOWER 802.11BG
++ */
++#define EEPROM_TXPOWER_BG1 0x0029
++#define EEPROM_TXPOWER_BG2 0x0030
++#define EEPROM_TXPOWER_BG_SIZE 7
++#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
++#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
++
++/*
++ * EEPROM TXPOWER 802.11A
++ */
++#define EEPROM_TXPOWER_A1 0x003c
++#define EEPROM_TXPOWER_A2 0x0053
++#define EEPROM_TXPOWER_A_SIZE 6
++#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
++#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
++
++/*
++ * EEPROM TXpower byrate: 20MHZ power
++ */
++#define EEPROM_TXPOWER_BYRATE 0x006f
++
++/*
++ * EEPROM BBP.
++ */
++#define EEPROM_BBP_START 0x0078
++#define EEPROM_BBP_SIZE 16
++#define EEPROM_BBP_VALUE FIELD16(0x00ff)
++#define EEPROM_BBP_REG_ID FIELD16(0xff00)
++
++/*
++ * MCU mailbox commands.
++ */
++#define MCU_SLEEP 0x30
++#define MCU_WAKEUP 0x31
++#define MCU_RADIO_OFF 0x35
++#define MCU_LED 0x50
++#define MCU_LED_STRENGTH 0x51
++#define MCU_LED_1 0x52
++#define MCU_LED_2 0x53
++#define MCU_LED_3 0x54
++#define MCU_RADAR 0x60
++#define MCU_BOOT_SIGNAL 0x72
++#define MCU_BBP_SIGNAL 0x80
++
++/*
++ * MCU mailbox tokens
++ */
++#define TOKEN_WAKUP 3
++
++/*
++ * DMA descriptor defines.
++ */
++#define TXD_DESC_SIZE ( 4 * sizeof(__le32) )
++#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) )
++#define RXD_DESC_SIZE ( 4 * sizeof(__le32) )
++#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) )
++
++/*
++ * TX descriptor format for TX, PRIO and Beacon Ring.
++ */
++
++/*
++ * Word0
++ */
++#define TXD_W0_SD_PTR0 FIELD32(0xffffffff)
++
++/*
++ * Word1
++ */
++#define TXD_W1_SD_LEN1 FIELD32(0x00003fff)
++#define TXD_W1_LAST_SEC1 FIELD32(0x00004000)
++#define TXD_W1_BURST FIELD32(0x00008000)
++#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000)
++#define TXD_W1_LAST_SEC0 FIELD32(0x40000000)
++#define TXD_W1_DMA_DONE FIELD32(0x80000000)
++
++/*
++ * Word2
++ */
++#define TXD_W2_SD_PTR1 FIELD32(0xffffffff)
++
++/*
++ * Word3
++ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
++ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
++ * 0:MGMT, 1:HCCA 2:EDCA
++ */
++#define TXD_W3_WIV FIELD32(0x01000000)
++#define TXD_W3_QSEL FIELD32(0x06000000)
++#define TXD_W3_TCO FIELD32(0x20000000)
++#define TXD_W3_UCO FIELD32(0x40000000)
++#define TXD_W3_ICO FIELD32(0x80000000)
++
++/*
++ * TX WI structure
++ */
++
++/*
++ * Word0
++ * FRAG: 1 To inform TKIP engine this is a fragment.
++ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
++ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
++ * BW: Channel bandwidth 20MHz or 40 MHz
++ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
++ */
++#define TXWI_W0_FRAG FIELD32(0x00000001)
++#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
++#define TXWI_W0_CF_ACK FIELD32(0x00000004)
++#define TXWI_W0_TS FIELD32(0x00000008)
++#define TXWI_W0_AMPDU FIELD32(0x00000010)
++#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0)
++#define TXWI_W0_TX_OP FIELD32(0x00000300)
++#define TXWI_W0_MCS FIELD32(0x007f0000)
++#define TXWI_W0_BW FIELD32(0x00800000)
++#define TXWI_W0_SHORT_GI FIELD32(0x01000000)
++#define TXWI_W0_STBC FIELD32(0x06000000)
++#define TXWI_W0_IFS FIELD32(0x08000000)
++#define TXWI_W0_PHYMODE FIELD32(0xc0000000)
++
++/*
++ * Word1
++ */
++#define TXWI_W1_ACK FIELD32(0x00000001)
++#define TXWI_W1_NSEQ FIELD32(0x00000002)
++#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc)
++#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00)
++#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
++#define TXWI_W1_PACKETID FIELD32(0xf0000000)
++
++/*
++ * Word2
++ */
++#define TXWI_W2_IV FIELD32(0xffffffff)
++
++/*
++ * Word3
++ */
++#define TXWI_W3_EIV FIELD32(0xffffffff)
++
++/*
++ * RX descriptor format for RX Ring.
++ */
++
++/*
++ * Word0
++ */
++#define RXD_W0_SDP0 FIELD32(0xffffffff)
++
++/*
++ * Word1
++ */
++#define RXD_W1_SDL1 FIELD32(0x00003fff)
++#define RXD_W1_SDL0 FIELD32(0x3fff0000)
++#define RXD_W1_LS0 FIELD32(0x40000000)
++#define RXD_W1_DMA_DONE FIELD32(0x80000000)
++
++/*
++ * Word2
++ */
++#define RXD_W2_SDP1 FIELD32(0xffffffff)
++
++/*
++ * Word3
++ * AMSDU: RX with 802.3 header, not 802.11 header.
++ * DECRYPTED: This frame is being decrypted.
++ */
++#define RXD_W3_BA FIELD32(0x00000001)
++#define RXD_W3_DATA FIELD32(0x00000002)
++#define RXD_W3_NULLDATA FIELD32(0x00000004)
++#define RXD_W3_FRAG FIELD32(0x00000008)
++#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010)
++#define RXD_W3_MULTICAST FIELD32(0x00000020)
++#define RXD_W3_BROADCAST FIELD32(0x00000040)
++#define RXD_W3_MY_BSS FIELD32(0x00000080)
++#define RXD_W3_CRC_ERROR FIELD32(0x00000100)
++#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600)
++#define RXD_W3_AMSDU FIELD32(0x00000800)
++#define RXD_W3_HTC FIELD32(0x00001000)
++#define RXD_W3_RSSI FIELD32(0x00002000)
++#define RXD_W3_L2PAD FIELD32(0x00004000)
++#define RXD_W3_AMPDU FIELD32(0x00008000)
++#define RXD_W3_DECRYPTED FIELD32(0x00010000)
++#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000)
++#define RXD_W3_PLCP_RSSI FIELD32(0x00040000)
++
++/*
++ * RX WI structure
++ */
++
++/*
++ * Word0
++ */
++#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
++#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
++#define RXWI_W0_BSSID FIELD32(0x00001c00)
++#define RXWI_W0_UDF FIELD32(0x0000e000)
++#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
++#define RXWI_W0_TID FIELD32(0xf0000000)
++
++/*
++ * Word1
++ */
++#define RXWI_W1_FRAG FIELD32(0x0000000f)
++#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
++#define RXWI_W1_MCS FIELD32(0x007f0000)
++#define RXWI_W1_BW FIELD32(0x00800000)
++#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
++#define RXWI_W1_STBC FIELD32(0x06000000)
++#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
++
++/*
++ * Word2
++ */
++#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
++#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
++#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
++
++/*
++ * Word3
++ */
++#define RXWI_W3_SNR0 FIELD32(0x000000ff)
++#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
++
++/*
++ * Macro's for converting txpower from EEPROM to mac80211 value
++ * and from mac80211 value to register value.
++ */
++#define MIN_G_TXPOWER 0
++#define MIN_A_TXPOWER -7
++#define MAX_G_TXPOWER 31
++#define MAX_A_TXPOWER 15
++#define DEFAULT_TXPOWER 5
++
++#define TXPOWER_G_FROM_DEV(__txpower) \
++ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
++
++#define TXPOWER_G_TO_DEV(__txpower) \
++ clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
++
++#define TXPOWER_A_FROM_DEV(__txpower) \
++ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
++
++#define TXPOWER_A_TO_DEV(__txpower) \
++ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
++
++#endif /* RT2800PCI_H */
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -147,6 +147,12 @@ struct rt2x00_chip {
+ #define RT2561 0x0302
+ #define RT2661 0x0401
+ #define RT2571 0x1300
++#define RT2860 0x0601 /* 2.4GHz PCI/CB */
++#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */
++#define RT2890 0x0701 /* 2.4GHz PCIe */
++#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */
++#define RT2880 0x2880 /* WSOC */
++#define RT3052 0x3052 /* WSOC */
+ #define RT2870 0x1600
+
+ u16 rf;
+++ /dev/null
-From b587a44d6cf038cac3ce194c49196f501fa4bb48 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:32:50 +0100
-Subject: [PATCH 4/9] rt2x00: Add rt73usb USB IDs
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt73usb.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/rt2x00/rt73usb.c
-@@ -2369,6 +2369,8 @@ static struct usb_device_id rt73usb_devi
- /* Buffalo */
- { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
-+ { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
-+ { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
- /* CNet */
- { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
- { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
--- /dev/null
+From ff3453072abf45ccf05e83f69c69951f3d7f7160 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 26 Apr 2009 17:35:38 +0200
+Subject: [PATCH 3/4] rt2x00: Allocate DMA (rt2800pci)
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -2906,6 +2906,7 @@ static int rt2800pci_probe_hw(struct rt2
+ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
+ !rt2x00_rt(&rt2x00dev->chip, RT3052))
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
++ __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+++ /dev/null
-From 0f4396e5a4351ccd48256407b4a606d6c33a94cb Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:37:26 +0100
-Subject: [PATCH 5/9] rt2x00: Implement support for 802.11n
-
-Extend rt2x00lib capabilities to support 802.11n,
-it still lacks aggregation support, but that can
-be added in the future.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/Kconfig | 3 +
- drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2x00.h | 4 +
- drivers/net/wireless/rt2x00/rt2x00config.c | 5 ++
- drivers/net/wireless/rt2x00/rt2x00dev.c | 91 ++++++++++++++++++++-------
- drivers/net/wireless/rt2x00/rt2x00ht.c | 69 +++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00lib.h | 24 +++++++
- drivers/net/wireless/rt2x00/rt2x00queue.c | 1 +
- drivers/net/wireless/rt2x00/rt2x00queue.h | 33 ++++++++--
- 9 files changed, 201 insertions(+), 30 deletions(-)
- create mode 100644 drivers/net/wireless/rt2x00/rt2x00ht.c
-
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -8,6 +8,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) +=
- rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o
- rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
- rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
-+rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o
-
- obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
- obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -357,6 +357,7 @@ static inline struct rt2x00_intf* vif_to
- * for @tx_power_a, @tx_power_bg and @channels.
- * @channels: Device/chipset specific channel values (See &struct rf_channel).
- * @channels_info: Additional information for channels (See &struct channel_info).
-+ * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
- */
- struct hw_mode_spec {
- unsigned int supported_bands;
-@@ -370,6 +371,8 @@ struct hw_mode_spec {
- unsigned int num_channels;
- const struct rf_channel *channels;
- const struct channel_info *channels_info;
-+
-+ struct ieee80211_sta_ht_cap ht;
- };
-
- /*
-@@ -606,6 +609,7 @@ enum rt2x00_flags {
- CONFIG_EXTERNAL_LNA_BG,
- CONFIG_DOUBLE_ANTENNA,
- CONFIG_DISABLE_LINK_TUNING,
-+ CONFIG_CHANNEL_HT40,
- };
-
- /*
---- a/drivers/net/wireless/rt2x00/rt2x00config.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
-@@ -173,6 +173,11 @@ void rt2x00lib_config(struct rt2x00_dev
- libconf.conf = conf;
-
- if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
-+ if (conf_is_ht40(conf))
-+ __set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
-+ else
-+ __clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
-+
- memcpy(&libconf.rf,
- &rt2x00dev->spec.channels[conf->channel->hw_value],
- sizeof(libconf.rf));
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -316,18 +316,54 @@ void rt2x00lib_txdone(struct queue_entry
- }
- EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
-
-+static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
-+ struct rxdone_entry_desc *rxdesc)
-+{
-+ struct ieee80211_supported_band *sband;
-+ const struct rt2x00_rate *rate;
-+ unsigned int i;
-+ int signal;
-+ int type;
-+
-+ /*
-+ * For non-HT rates the MCS value needs to contain the
-+ * actually used rate modulation (CCK or OFDM).
-+ */
-+ if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
-+ signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
-+ else
-+ signal = rxdesc->signal;
-+
-+ type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
-+
-+ sband = &rt2x00dev->bands[rt2x00dev->curr_band];
-+ for (i = 0; i < sband->n_bitrates; i++) {
-+ rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
-+
-+ if (((type == RXDONE_SIGNAL_PLCP) &&
-+ (rate->plcp == signal)) ||
-+ ((type == RXDONE_SIGNAL_BITRATE) &&
-+ (rate->bitrate == signal)) ||
-+ ((type == RXDONE_SIGNAL_MCS) &&
-+ (rate->mcs == signal))) {
-+ return i;
-+ }
-+ }
-+
-+ WARNING(rt2x00dev, "Frame received with unrecognized signal, "
-+ "signal=0x%.4x, type=%d.\n", signal, type);
-+ return 0;
-+}
-+
- void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
- struct queue_entry *entry)
- {
- struct rxdone_entry_desc rxdesc;
- struct sk_buff *skb;
- struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
-- struct ieee80211_supported_band *sband;
-- const struct rt2x00_rate *rate;
- unsigned int header_length;
- unsigned int align;
-- unsigned int i;
-- int idx = -1;
-+ int rate_idx;
-
- /*
- * Allocate a new sk_buffer. If no new buffer available, drop the
-@@ -376,26 +412,17 @@ void rt2x00lib_rxdone(struct rt2x00_dev
- skb_trim(entry->skb, rxdesc.size);
-
- /*
-- * Update RX statistics.
-- */
-- sband = &rt2x00dev->bands[rt2x00dev->curr_band];
-- for (i = 0; i < sband->n_bitrates; i++) {
-- rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
--
-- if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
-- (rate->plcp == rxdesc.signal)) ||
-- ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
-- (rate->bitrate == rxdesc.signal))) {
-- idx = i;
-- break;
-- }
-- }
--
-- if (idx < 0) {
-- WARNING(rt2x00dev, "Frame received with unrecognized signal,"
-- "signal=0x%.2x, type=%d.\n", rxdesc.signal,
-- (rxdesc.dev_flags & RXDONE_SIGNAL_MASK));
-- idx = 0;
-+ * Check if the frame was received using HT. In that case,
-+ * the rate is the MCS index and should be passed to mac80211
-+ * directly. Otherwise we need to translate the signal to
-+ * the correct bitrate index.
-+ */
-+ if (rxdesc.rate_mode == RATE_MODE_CCK ||
-+ rxdesc.rate_mode == RATE_MODE_OFDM) {
-+ rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
-+ } else {
-+ rxdesc.flags |= RX_FLAG_HT;
-+ rate_idx = rxdesc.signal;
- }
-
- /*
-@@ -405,7 +432,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev
- rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
-
- rx_status->mactime = rxdesc.timestamp;
-- rx_status->rate_idx = idx;
-+ rx_status->rate_idx = rate_idx;
- rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi);
- rx_status->signal = rxdesc.rssi;
- rx_status->noise = rxdesc.noise;
-@@ -440,72 +467,84 @@ const struct rt2x00_rate rt2x00_supporte
- .bitrate = 10,
- .ratemask = BIT(0),
- .plcp = 0x00,
-+ .mcs = RATE_MCS(RATE_MODE_CCK, 0),
- },
- {
- .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
- .bitrate = 20,
- .ratemask = BIT(1),
- .plcp = 0x01,
-+ .mcs = RATE_MCS(RATE_MODE_CCK, 1),
- },
- {
- .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
- .bitrate = 55,
- .ratemask = BIT(2),
- .plcp = 0x02,
-+ .mcs = RATE_MCS(RATE_MODE_CCK, 2),
- },
- {
- .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
- .bitrate = 110,
- .ratemask = BIT(3),
- .plcp = 0x03,
-+ .mcs = RATE_MCS(RATE_MODE_CCK, 3),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 60,
- .ratemask = BIT(4),
- .plcp = 0x0b,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 90,
- .ratemask = BIT(5),
- .plcp = 0x0f,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 120,
- .ratemask = BIT(6),
- .plcp = 0x0a,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 180,
- .ratemask = BIT(7),
- .plcp = 0x0e,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 240,
- .ratemask = BIT(8),
- .plcp = 0x09,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 360,
- .ratemask = BIT(9),
- .plcp = 0x0d,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 480,
- .ratemask = BIT(10),
- .plcp = 0x08,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
- },
- {
- .flags = DEV_RATE_OFDM,
- .bitrate = 540,
- .ratemask = BIT(11),
- .plcp = 0x0c,
-+ .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
- },
- };
-
-@@ -581,6 +620,8 @@ static int rt2x00lib_probe_hw_modes(stru
- rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
-+ memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
-+ &spec->ht, sizeof(spec->ht));
- }
-
- /*
-@@ -597,6 +638,8 @@ static int rt2x00lib_probe_hw_modes(stru
- rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
- hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
-+ memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
-+ &spec->ht, sizeof(spec->ht));
- }
-
- return 0;
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
-@@ -0,0 +1,69 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2x00lib
-+ Abstract: rt2x00 HT specific routines.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include "rt2x00.h"
-+#include "rt2x00lib.h"
-+
-+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
-+ struct txentry_desc *txdesc,
-+ const struct rt2x00_rate *hwrate)
-+{
-+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
-+
-+ if (tx_info->control.sta)
-+ txdesc->mpdu_density =
-+ tx_info->control.sta->ht_cap.ampdu_density;
-+ else
-+ txdesc->mpdu_density = 0;
-+
-+ txdesc->ba_size = 7; /* FIXME: What value is needed? */
-+ txdesc->stbc = 0; /* FIXME: What value is needed? */
-+
-+ txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
-+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
-+ txdesc->mcs |= 0x08;
-+
-+ /*
-+ * Convert flags
-+ */
-+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
-+ __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags);
-+
-+ /*
-+ * Determine HT Mix/Greenfield rate mode
-+ */
-+ if (txrate->flags & IEEE80211_TX_RC_MCS)
-+ txdesc->rate_mode = RATE_MODE_HT_MIX;
-+ if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
-+ txdesc->rate_mode = RATE_MODE_HT_GREENFIELD;
-+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
-+ __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
-+ if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
-+ __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
-+}
---- a/drivers/net/wireless/rt2x00/rt2x00lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
-@@ -48,6 +48,7 @@ struct rt2x00_rate {
- unsigned short ratemask;
-
- unsigned short plcp;
-+ unsigned short mcs;
- };
-
- extern const struct rt2x00_rate rt2x00_supported_rates[12];
-@@ -57,6 +58,14 @@ static inline const struct rt2x00_rate *
- return &rt2x00_supported_rates[hw_value & 0xff];
- }
-
-+#define RATE_MCS(__mode, __mcs) \
-+ ( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) )
-+
-+static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
-+{
-+ return (mcs_value & 0x00ff);
-+}
-+
- /*
- * Radio control handlers.
- */
-@@ -341,6 +350,21 @@ static inline void rt2x00crypto_rx_inser
- #endif /* CONFIG_RT2X00_LIB_CRYPTO */
-
- /*
-+ * HT handlers.
-+ */
-+#ifdef CONFIG_RT2X00_LIB_HT
-+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
-+ struct txentry_desc *txdesc,
-+ const struct rt2x00_rate *hwrate);
-+#else
-+static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
-+ struct txentry_desc *txdesc,
-+ const struct rt2x00_rate *hwrate)
-+{
-+}
-+#endif /* CONFIG_RT2X00_LIB_HT */
-+
-+/*
- * RFkill handlers.
- */
- #ifdef CONFIG_RT2X00_LIB_RFKILL
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -326,6 +326,7 @@ static void rt2x00queue_create_tx_descri
- * Apply TX descriptor handling by components
- */
- rt2x00crypto_create_tx_descriptor(entry, txdesc);
-+ rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate);
- rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
- rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
- }
---- a/drivers/net/wireless/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
-@@ -35,9 +35,12 @@
- * for USB devices this restriction does not apply, but the value of
- * 2432 makes sense since it is big enough to contain the maximum fragment
- * size according to the ieee802.11 specs.
-+ * The aggregation size depends on support from the driver, but should
-+ * be something around 3840 bytes.
- */
--#define DATA_FRAME_SIZE 2432
--#define MGMT_FRAME_SIZE 256
-+#define DATA_FRAME_SIZE 2432
-+#define MGMT_FRAME_SIZE 256
-+#define AGGREGATION_SIZE 3840
-
- /**
- * DOC: Number of entries per queue
-@@ -145,6 +148,7 @@ static inline struct skb_frame_desc* get
- *
- * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
- * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
-+ * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value.
- * @RXDONE_MY_BSS: Does this frame originate from device's BSS.
- * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data.
- * @RXDONE_CRYPTO_ICV: Driver provided ICV data.
-@@ -152,9 +156,10 @@ static inline struct skb_frame_desc* get
- enum rxdone_entry_desc_flags {
- RXDONE_SIGNAL_PLCP = 1 << 0,
- RXDONE_SIGNAL_BITRATE = 1 << 1,
-- RXDONE_MY_BSS = 1 << 2,
-- RXDONE_CRYPTO_IV = 1 << 3,
-- RXDONE_CRYPTO_ICV = 1 << 4,
-+ RXDONE_SIGNAL_MCS = 1 << 2,
-+ RXDONE_MY_BSS = 1 << 3,
-+ RXDONE_CRYPTO_IV = 1 << 4,
-+ RXDONE_CRYPTO_ICV = 1 << 5,
- };
-
- /**
-@@ -163,7 +168,7 @@ enum rxdone_entry_desc_flags {
- * from &rxdone_entry_desc to a signal value type.
- */
- #define RXDONE_SIGNAL_MASK \
-- ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE )
-+ ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS )
-
- /**
- * struct rxdone_entry_desc: RX Entry descriptor
-@@ -177,6 +182,7 @@ enum rxdone_entry_desc_flags {
- * @size: Data size of the received frame.
- * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
- * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
-+ * @rate_mode: Rate mode (See @enum rate_modulation).
- * @cipher: Cipher type used during decryption.
- * @cipher_status: Decryption status.
- * @iv: IV/EIV data used during decryption.
-@@ -190,6 +196,7 @@ struct rxdone_entry_desc {
- int size;
- int flags;
- int dev_flags;
-+ u16 rate_mode;
- u8 cipher;
- u8 cipher_status;
-
-@@ -243,6 +250,9 @@ struct txdone_entry_desc {
- * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
- * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
- * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
-+ * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU.
-+ * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth.
-+ * @ENTRY_TXD_HT_SHORT_GI: Use short GI.
- */
- enum txentry_desc_flags {
- ENTRY_TXD_RTS_FRAME,
-@@ -258,6 +268,9 @@ enum txentry_desc_flags {
- ENTRY_TXD_ENCRYPT_PAIRWISE,
- ENTRY_TXD_ENCRYPT_IV,
- ENTRY_TXD_ENCRYPT_MMIC,
-+ ENTRY_TXD_HT_AMPDU,
-+ ENTRY_TXD_HT_BW_40,
-+ ENTRY_TXD_HT_SHORT_GI,
- };
-
- /**
-@@ -271,7 +284,11 @@ enum txentry_desc_flags {
- * @length_low: PLCP length low word.
- * @signal: PLCP signal.
- * @service: PLCP service.
-+ * @msc: MCS.
-+ * @stbc: STBC.
-+ * @ba_size: BA size.
- * @rate_mode: Rate mode (See @enum rate_modulation).
-+ * @mpdu_density: MDPU density.
- * @retry_limit: Max number of retries.
- * @aifs: AIFS value.
- * @ifs: IFS value.
-@@ -291,7 +308,11 @@ struct txentry_desc {
- u16 signal;
- u16 service;
-
-+ u16 mcs;
-+ u16 stbc;
-+ u16 ba_size;
- u16 rate_mode;
-+ u16 mpdu_density;
-
- short retry_limit;
- short aifs;
--- /dev/null
+From 690559385626e98e2a91c280a8bca195f071756c Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Tue, 28 Apr 2009 20:12:43 +0200
+Subject: [PATCH 4/4] rt2x00: Update from rt2860 driver (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c | 10 +++++++---
+ drivers/net/wireless/rt2x00/rt2800pci.h | 2 ++
+ 2 files changed, 9 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -2048,13 +2048,17 @@ static void rt2800pci_disable_radio(stru
+ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+ {
+- rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
++ /*
++ * Always put the device to sleep (even when we intend to wakup!)
++ * if the device is booting and wasn't asleep it will return
++ * failure when attempting to wakup.
++ */
++ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+ if (state == STATE_AWAKE) {
+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+- } else
+- rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
++ }
+
+ return 0;
+ }
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -1714,6 +1714,7 @@ struct mac_iveiv_entry {
+ #define MCU_SLEEP 0x30
+ #define MCU_WAKEUP 0x31
+ #define MCU_RADIO_OFF 0x35
++#define MCU_CURRENT 0x36
+ #define MCU_LED 0x50
+ #define MCU_LED_STRENGTH 0x51
+ #define MCU_LED_1 0x52
+@@ -1722,6 +1723,7 @@ struct mac_iveiv_entry {
+ #define MCU_RADAR 0x60
+ #define MCU_BOOT_SIGNAL 0x72
+ #define MCU_BBP_SIGNAL 0x80
++#define MCU_POWER_SAVE 0x83
+
+ /*
+ * MCU mailbox tokens
+++ /dev/null
-From 18b2be31a35dc8bd216e60e3c9d8d8e7b2179aed Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:38:40 +0100
-Subject: [PATCH 6/9] rt2x00: Add rt2x00soc bus module
-
-Add new library module for SoC drivers.
-This is needed to fully support the platform
-driver part of rt2800pci.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/Kconfig | 4 +
- drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2x00soc.c | 159 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00soc.h | 52 ++++++++++
- 4 files changed, 216 insertions(+), 0 deletions(-)
- create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.c
- create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.h
-
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -12,6 +12,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2
-
- obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
- obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
-+obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
- obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
- obj-$(CONFIG_RT2400PCI) += rt2400pci.o
- obj-$(CONFIG_RT2500PCI) += rt2500pci.o
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
-@@ -0,0 +1,159 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2x00soc
-+ Abstract: rt2x00 generic soc device routines.
-+ */
-+
-+#include <linux/bug.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include "rt2x00.h"
-+#include "rt2x00soc.h"
-+
-+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
-+{
-+ kfree(rt2x00dev->rf);
-+ rt2x00dev->rf = NULL;
-+
-+ kfree(rt2x00dev->eeprom);
-+ rt2x00dev->eeprom = NULL;
-+}
-+
-+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
-+ struct resource *res;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+
-+ rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
-+ if (!rt2x00dev->csr.base)
-+ goto exit;
-+
-+ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
-+ if (!rt2x00dev->eeprom)
-+ goto exit;
-+
-+ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
-+ if (!rt2x00dev->rf)
-+ goto exit;
-+
-+ return 0;
-+
-+exit:
-+ ERROR_PROBE("Failed to allocate registers.\n");
-+ rt2x00soc_free_reg(rt2x00dev);
-+
-+ return -ENOMEM;
-+}
-+
-+int rt2x00soc_probe(struct platform_device *pdev,
-+ const unsigned short chipset,
-+ const struct rt2x00_ops *ops)
-+{
-+ struct ieee80211_hw *hw;
-+ struct rt2x00_dev *rt2x00dev;
-+ int retval;
-+
-+ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
-+ if (!hw) {
-+ ERROR_PROBE("Failed to allocate hardware.\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ rt2x00dev = hw->priv;
-+ rt2x00dev->dev = &pdev->dev;
-+ rt2x00dev->ops = ops;
-+ rt2x00dev->hw = hw;
-+ rt2x00dev->irq = platform_get_irq(pdev, 0);
-+ rt2x00dev->name = pdev->dev.driver->name;
-+
-+ rt2x00_set_chip_rt(rt2x00dev, chipset);
-+
-+ retval = rt2x00soc_alloc_reg(rt2x00dev);
-+ if (retval)
-+ goto exit_free_device;
-+
-+ retval = rt2x00lib_probe_dev(rt2x00dev);
-+ if (retval)
-+ goto exit_free_reg;
-+
-+ return 0;
-+
-+exit_free_reg:
-+ rt2x00soc_free_reg(rt2x00dev);
-+
-+exit_free_device:
-+ ieee80211_free_hw(hw);
-+
-+ return retval;
-+}
-+
-+int rt2x00soc_remove(struct platform_device *pdev)
-+{
-+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+
-+ /*
-+ * Free all allocated data.
-+ */
-+ rt2x00lib_remove_dev(rt2x00dev);
-+ rt2x00soc_free_reg(rt2x00dev);
-+ ieee80211_free_hw(hw);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(rt2x00soc_remove);
-+
-+#ifdef CONFIG_PM
-+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+
-+ return rt2x00lib_suspend(rt2x00dev, state);
-+}
-+EXPORT_SYMBOL_GPL(rt2x00soc_suspend);
-+
-+int rt2x00soc_resume(struct platform_device *pdev)
-+{
-+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+
-+ return rt2x00lib_resume(rt2x00dev);
-+}
-+EXPORT_SYMBOL_GPL(rt2x00soc_resume);
-+#endif /* CONFIG_PM */
-+
-+/*
-+ * rt2x00soc module information.
-+ */
-+MODULE_AUTHOR(DRV_PROJECT);
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_DESCRIPTION("rt2x00 soc library");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
-@@ -0,0 +1,52 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2x00soc
-+ Abstract: Data structures for the rt2x00soc module.
-+ */
-+
-+#ifndef RT2X00SOC_H
-+#define RT2X00SOC_H
-+
-+#define KSEG1ADDR(__ptr) __ptr
-+
-+#define __rt2x00soc_probe(__chipset, __ops) \
-+static int __rt2x00soc_probe(struct platform_device *pdev) \
-+{ \
-+ return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
-+}
-+
-+/*
-+ * SoC driver handlers.
-+ */
-+int rt2x00soc_probe(struct platform_device *pdev,
-+ const unsigned short chipset,
-+ const struct rt2x00_ops *ops);
-+int rt2x00soc_remove(struct platform_device *pdev);
-+#ifdef CONFIG_PM
-+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
-+int rt2x00soc_resume(struct platform_device *pdev);
-+#else
-+#define rt2x00soc_suspend NULL
-+#define rt2x00soc_resume NULL
-+#endif /* CONFIG_PM */
-+
-+#endif /* RT2X00SOC_H */
--- /dev/null
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -3066,7 +3066,6 @@ static const struct ieee80211_ops rt2800
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+- .config_interface = rt2x00mac_config_interface,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
+ .get_stats = rt2x00mac_get_stats,
+++ /dev/null
-From 7f759a5e56f64fed24e5eb487003ce455786bc31 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:44:18 +0100
-Subject: [PATCH 7/9] rt2x00: Add calibration fields to rt2x00dev (rt2x00ht)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -782,6 +782,12 @@ struct rt2x00_dev {
- u8 freq_offset;
-
- /*
-+ * Calibration information (for rt2800usb).
-+ */
-+ u8 calibration_bw20;
-+ u8 calibration_bw40;
-+
-+ /*
- * Low level statistics which will have
- * to be kept up to date while device is running.
- */
+++ /dev/null
-From b7dcb460c4c441ce52b3c5ce30d65e1ecfbb30ad Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:46:46 +0100
-Subject: [PATCH 8/9] rt2x00: Implement support for rt2800pci
-
-Add support for the rt2800pci chipset.
-
-Includes various patches from Mattias, Mark, Felix and Xose.
-
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
-Signed-off-by: Mark Asselstine <asselsm@gmail.com>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/Kconfig | 26 +
- drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2800pci.c | 3244 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800pci.h | 1927 ++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h | 6 +
- 5 files changed, 5204 insertions(+), 0 deletions(-)
- create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
- create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
-
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -17,5 +17,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u
- obj-$(CONFIG_RT2400PCI) += rt2400pci.o
- obj-$(CONFIG_RT2500PCI) += rt2500pci.o
- obj-$(CONFIG_RT61PCI) += rt61pci.o
-+obj-$(CONFIG_RT2800PCI) += rt2800pci.o
- obj-$(CONFIG_RT2500USB) += rt2500usb.o
- obj-$(CONFIG_RT73USB) += rt73usb.o
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -0,0 +1,3244 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2800pci
-+ Abstract: rt2800pci device specific routines.
-+ Supported chipsets: RT2800E & RT2800ED.
-+ */
-+
-+#include <linux/crc-ccitt.h>
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/eeprom_93cx6.h>
-+
-+#include "rt2x00.h"
-+#include "rt2x00pci.h"
-+#include "rt2x00soc.h"
-+#include "rt2800pci.h"
-+
-+#ifdef CONFIG_RT2800PCI_PCI_MODULE
-+#define CONFIG_RT2800PCI_PCI
-+#endif
-+
-+#ifdef CONFIG_RT2800PCI_WISOC_MODULE
-+#define CONFIG_RT2800PCI_WISOC
-+#endif
-+
-+/*
-+ * Allow hardware encryption to be disabled.
-+ */
-+static int modparam_nohwcrypt = 0;
-+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-+
-+/*
-+ * Register access.
-+ * BBP and RF register require indirect register access,
-+ * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
-+ * These indirect registers work with busy bits,
-+ * and we will try maximal REGISTER_BUSY_COUNT times to access
-+ * the register while taking a REGISTER_BUSY_DELAY us delay
-+ * between each attampt. When the busy bit is still set at that time,
-+ * the access attempt is considered to have failed,
-+ * and we will print an error.
-+ */
-+#define WAIT_FOR_BBP(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RFCSR(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RF(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-+#define WAIT_FOR_MCU(__dev, __reg) \
-+ rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-+ H2M_MAILBOX_CSR_OWNER, (__reg))
-+
-+static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u8 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, u8 *value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes available, afterwards we
-+ * can safely write the read request into the register.
-+ * After the data has been written, we wait until hardware
-+ * returns the correct value, if at any time the register
-+ * doesn't become available in time, reg will be 0xffffffff
-+ * which means we return 0xff to the caller.
-+ */
-+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
-+
-+ WAIT_FOR_BBP(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u8 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RFCSR becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, u8 *value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RFCSR becomes available, afterwards we
-+ * can safely write the read request into the register.
-+ * After the data has been written, we wait until hardware
-+ * returns the correct value, if at any time the register
-+ * doesn't become available in time, reg will be 0xffffffff
-+ * which means we return 0xff to the caller.
-+ */
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
-+
-+ WAIT_FOR_RFCSR(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u32 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RF becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_RF(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
-+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
-+ rt2x00_rf_write(rt2x00dev, word, value);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
-+ const u8 command, const u8 token,
-+ const u8 arg0, const u8 arg1)
-+{
-+ u32 reg;
-+
-+ /*
-+ * RT2880 and RT3052 don't support MCU requests.
-+ */
-+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
-+ rt2x00_rt(&rt2x00dev->chip, RT3052))
-+ return;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the MCU becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_MCU(rt2x00dev, ®)) {
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
-+
-+ reg = 0;
-+ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
-+ rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < 200; i++) {
-+ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®);
-+
-+ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
-+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
-+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
-+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
-+ break;
-+
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ if (i == 200)
-+ ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
-+
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
-+}
-+
-+#ifdef CONFIG_RT2800PCI_WISOC
-+static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
-+
-+ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
-+}
-+#else
-+static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
-+{
-+}
-+#endif /* CONFIG_RT2800PCI_WISOC */
-+
-+#ifdef CONFIG_RT2800PCI_PCI
-+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
-+{
-+ struct rt2x00_dev *rt2x00dev = eeprom->data;
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
-+
-+ eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
-+ eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
-+ eeprom->reg_data_clock =
-+ !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
-+ eeprom->reg_chip_select =
-+ !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
-+}
-+
-+static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
-+{
-+ struct rt2x00_dev *rt2x00dev = eeprom->data;
-+ u32 reg = 0;
-+
-+ rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
-+ rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
-+ rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK,
-+ !!eeprom->reg_data_clock);
-+ rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT,
-+ !!eeprom->reg_chip_select);
-+
-+ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
-+}
-+
-+static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct eeprom_93cx6 eeprom;
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®);
-+
-+ eeprom.data = rt2x00dev;
-+ eeprom.register_read = rt2800pci_eepromregister_read;
-+ eeprom.register_write = rt2800pci_eepromregister_write;
-+ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
-+ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
-+ eeprom.reg_data_in = 0;
-+ eeprom.reg_data_out = 0;
-+ eeprom.reg_data_clock = 0;
-+ eeprom.reg_chip_select = 0;
-+
-+ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
-+ EEPROM_SIZE / sizeof(u16));
-+}
-+#else
-+static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
-+{
-+}
-+#endif /* CONFIG_RT2800PCI_PCI */
-+
-+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-+static const struct rt2x00debug rt2800pci_rt2x00debug = {
-+ .owner = THIS_MODULE,
-+ .csr = {
-+ .read = rt2x00pci_register_read,
-+ .write = rt2x00pci_register_write,
-+ .flags = RT2X00DEBUGFS_OFFSET,
-+ .word_base = CSR_REG_BASE,
-+ .word_size = sizeof(u32),
-+ .word_count = CSR_REG_SIZE / sizeof(u32),
-+ },
-+ .eeprom = {
-+ .read = rt2x00_eeprom_read,
-+ .write = rt2x00_eeprom_write,
-+ .word_base = EEPROM_BASE,
-+ .word_size = sizeof(u16),
-+ .word_count = EEPROM_SIZE / sizeof(u16),
-+ },
-+ .bbp = {
-+ .read = rt2800pci_bbp_read,
-+ .write = rt2800pci_bbp_write,
-+ .word_base = BBP_BASE,
-+ .word_size = sizeof(u8),
-+ .word_count = BBP_SIZE / sizeof(u8),
-+ },
-+ .rf = {
-+ .read = rt2x00_rf_read,
-+ .write = rt2800pci_rf_write,
-+ .word_base = RF_BASE,
-+ .word_size = sizeof(u32),
-+ .word_count = RF_SIZE / sizeof(u32),
-+ },
-+};
-+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-+
-+#ifdef CONFIG_RT2X00_LIB_RFKILL
-+static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
-+ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-+}
-+#else
-+#define rt2800pci_rfkill_poll NULL
-+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-+
-+#ifdef CONFIG_RT2X00_LIB_LEDS
-+static void rt2800pci_brightness_set(struct led_classdev *led_cdev,
-+ enum led_brightness brightness)
-+{
-+ struct rt2x00_led *led =
-+ container_of(led_cdev, struct rt2x00_led, led_dev);
-+ unsigned int enabled = brightness != LED_OFF;
-+ unsigned int bg_mode =
-+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-+ unsigned int polarity =
-+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-+ EEPROM_FREQ_LED_POLARITY);
-+ unsigned int ledmode =
-+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-+ EEPROM_FREQ_LED_MODE);
-+
-+ if (led->type == LED_TYPE_RADIO) {
-+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+ enabled ? 0x20 : 0);
-+ } else if (led->type == LED_TYPE_ASSOC) {
-+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-+ } else if (led->type == LED_TYPE_QUALITY) {
-+ /*
-+ * The brightness is divided into 6 levels (0 - 5),
-+ * The specs tell us the following levels:
-+ * 0, 1 ,3, 7, 15, 31
-+ * to determine the level in a simple way we can simply
-+ * work with bitshifting:
-+ * (1 << level) - 1
-+ */
-+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-+ (1 << brightness / (LED_FULL / 6)) - 1,
-+ polarity);
-+ }
-+}
-+
-+static int rt2800pci_blink_set(struct led_classdev *led_cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct rt2x00_led *led =
-+ container_of(led_cdev, struct rt2x00_led, led_dev);
-+ u32 reg;
-+
-+ rt2x00pci_register_read(led->rt2x00dev, LED_CFG, ®);
-+ rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on);
-+ rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
-+ rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
-+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
-+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
-+ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
-+ rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
-+ rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00_led *led,
-+ enum led_type type)
-+{
-+ led->rt2x00dev = rt2x00dev;
-+ led->type = type;
-+ led->led_dev.brightness_set = rt2800pci_brightness_set;
-+ led->led_dev.blink_set = rt2800pci_blink_set;
-+ led->flags = LED_INITIALIZED;
-+}
-+#endif /* CONFIG_RT2X00_LIB_LEDS */
-+
-+/*
-+ * Configuration handlers.
-+ */
-+static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct mac_wcid_entry wcid_entry;
-+ struct mac_iveiv_entry iveiv_entry;
-+ u32 offset;
-+ u32 reg;
-+
-+ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
-+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX,
-+ (crypto->cmd == SET_KEY) * crypto->bssidx);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-+
-+ memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-+ if ((crypto->cipher == CIPHER_TKIP) ||
-+ (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-+ (crypto->cipher == CIPHER_AES))
-+ iveiv_entry.iv[3] |= 0x20;
-+ iveiv_entry.iv[3] |= key->keyidx << 6;
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &iveiv_entry, sizeof(iveiv_entry));
-+
-+ offset = MAC_WCID_ENTRY(key->hw_key_idx);
-+
-+ memset(&wcid_entry, 0, sizeof(wcid_entry));
-+ if (crypto->cmd == SET_KEY)
-+ memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &wcid_entry, sizeof(wcid_entry));
-+}
-+
-+static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct hw_key_entry key_entry;
-+ struct rt2x00_field32 field;
-+ u32 offset;
-+ u32 reg;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-+
-+ memcpy(key_entry.key, crypto->key,
-+ sizeof(key_entry.key));
-+ memcpy(key_entry.tx_mic, crypto->tx_mic,
-+ sizeof(key_entry.tx_mic));
-+ memcpy(key_entry.rx_mic, crypto->rx_mic,
-+ sizeof(key_entry.rx_mic));
-+
-+ offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &key_entry, sizeof(key_entry));
-+ }
-+
-+ /*
-+ * The cipher types are stored over multiple registers
-+ * starting with SHARED_KEY_MODE_BASE each word will have
-+ * 32 bits and contains the cipher types for 2 bssidx each.
-+ * Using the correct defines correctly will cause overhead,
-+ * so just calculate the correct offset.
-+ */
-+ field.bit_offset = 4 * (key->hw_key_idx % 8);
-+ field.bit_mask = 0x7 << field.bit_offset;
-+
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, field,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ /*
-+ * Update WCID information
-+ */
-+ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct hw_key_entry key_entry;
-+ u32 offset;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ /*
-+ * 1 pairwise key is possible per AID, this means that the AID
-+ * equals our hw_key_idx. Make sure the WCID starts _after_ the
-+ * last possible shared key entry.
-+ */
-+ if (crypto->aid > (256 - 32))
-+ return -ENOSPC;
-+
-+ key->hw_key_idx = 32 + crypto->aid;
-+
-+
-+ memcpy(key_entry.key, crypto->key,
-+ sizeof(key_entry.key));
-+ memcpy(key_entry.tx_mic, crypto->tx_mic,
-+ sizeof(key_entry.tx_mic));
-+ memcpy(key_entry.rx_mic, crypto->rx_mic,
-+ sizeof(key_entry.rx_mic));
-+
-+ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-+ rt2x00pci_register_multiwrite(rt2x00dev, offset,
-+ &key_entry, sizeof(key_entry));
-+ }
-+
-+ /*
-+ * Update WCID information
-+ */
-+ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
-+
-+ return 0;
-+}
-+
-+static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int filter_flags)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Start configuration steps.
-+ * Note that the version error will always be dropped
-+ * and broadcast frames will always be accepted since
-+ * there is no filter for it at this time.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, ®);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR,
-+ !(filter_flags & FIF_FCSFAIL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR,
-+ !(filter_flags & FIF_PLCPFAIL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
-+ !(filter_flags & FIF_PROMISC_IN_BSS));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
-+ !(filter_flags & FIF_ALLMULTI));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-+}
-+
-+static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00_intf *intf,
-+ struct rt2x00intf_conf *conf,
-+ const unsigned int flags)
-+{
-+ unsigned int beacon_base;
-+ u32 reg;
-+
-+ if (flags & CONFIG_UPDATE_TYPE) {
-+ /*
-+ * Clear current synchronisation setup.
-+ * For the Beacon base registers we only need to clear
-+ * the first byte since that byte contains the VALID and OWNER
-+ * bits which (when set to 0) will invalidate the entire beacon.
-+ */
-+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-+ rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
-+
-+ /*
-+ * Enable synchronisation.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+ }
-+
-+ if (flags & CONFIG_UPDATE_MAC) {
-+ reg = le32_to_cpu(conf->mac[1]);
-+ rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-+ conf->mac[1] = cpu_to_le32(reg);
-+
-+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-+ conf->mac, sizeof(conf->mac));
-+ }
-+
-+ if (flags & CONFIG_UPDATE_BSSID) {
-+ reg = le32_to_cpu(conf->bssid[1]);
-+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-+ conf->bssid[1] = cpu_to_le32(reg);
-+
-+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-+ conf->bssid, sizeof(conf->bssid));
-+ }
-+}
-+
-+static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_erp *erp)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
-+ DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
-+ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY,
-+ !!erp->short_preamble);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE,
-+ !!erp->short_preamble);
-+ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL,
-+ erp->cts_protection ? 2 : 0);
-+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-+ erp->basic_rates);
-+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-+
-+ rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
-+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-+ rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-+ rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-+}
-+
-+static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev,
-+ struct antenna_setup *ant)
-+{
-+ u16 eeprom;
-+ u8 r1;
-+ u8 r3;
-+
-+ /*
-+ * FIXME: Use requested antenna configuration.
-+ */
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-+ rt2800pci_bbp_read(rt2x00dev, 3, &r3);
-+
-+ /*
-+ * Configure the TX antenna.
-+ */
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) {
-+ case 1:
-+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-+ break;
-+ case 2:
-+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-+ break;
-+ case 3:
-+ /* Do nothing */
-+ break;
-+ }
-+
-+ /*
-+ * Configure the RX antenna.
-+ */
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
-+ case 1:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-+ break;
-+ case 2:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-+ break;
-+ case 3:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-+ break;
-+ }
-+
-+ rt2800pci_bbp_write(rt2x00dev, 3, r3);
-+ rt2800pci_bbp_write(rt2x00dev, 1, r1);
-+}
-+
-+static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u16 eeprom;
-+ short lna_gain;
-+
-+ if (libconf->rf.channel <= 14) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-+ } else if (libconf->rf.channel <= 64) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-+ } else if (libconf->rf.channel <= 128) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-+ } else {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-+ }
-+
-+ rt2x00dev->lna_gain = lna_gain;
-+}
-+
-+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u16 eeprom;
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-+
-+ /*
-+ * Determine antenna settings from EEPROM
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+ } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2)
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+
-+ if (rf->channel > 14) {
-+ /*
-+ * When TX power is below 0, we should increase it by 7 to
-+ * make it a positive value (Minumum value is -7).
-+ * However this means that values between 0 and 7 have
-+ * double meaning, and we should set a 7DBm boost flag.
-+ */
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-+ (info->tx_power1 >= 0));
-+
-+ if (info->tx_power1 < 0)
-+ info->tx_power1 += 7;
-+
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-+ TXPOWER_A_TO_DEV(info->tx_power1));
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-+ (info->tx_power2 >= 0));
-+
-+ if (info->tx_power2 < 0)
-+ info->tx_power2 += 7;
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-+ TXPOWER_A_TO_DEV(info->tx_power2));
-+ } else {
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-+ TXPOWER_G_TO_DEV(info->tx_power1));
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-+ TXPOWER_G_TO_DEV(info->tx_power2));
-+ }
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-+
-+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+
-+ udelay(200);
-+
-+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+
-+ udelay(200);
-+
-+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
-+}
-+
-+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u8 rfcsr;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-+ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-+ TXPOWER_G_TO_DEV(info->tx_power1));
-+ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-+
-+ if (conf_is_ht40(conf))
-+ rt2800pci_rfcsr_write(rt2x00dev, 24,
-+ rt2x00dev->calibration_bw40);
-+ else
-+ rt2800pci_rfcsr_write(rt2x00dev, 24,
-+ rt2x00dev->calibration_bw20);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
-+}
-+
-+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u32 reg;
-+ unsigned int tx_pin;
-+ u16 eeprom;
-+ u8 bbp;
-+
-+ /*
-+ * Determine antenna settings from EEPROM
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-+ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
-+ else
-+ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
-+
-+ /*
-+ * Change BBP settings
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-+ rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-+ rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-+ rt2800pci_bbp_write(rt2x00dev, 86, 0);
-+
-+ if (rf->channel <= 14) {
-+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
-+ } else {
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0x84);
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
-+ }
-+ } else {
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0xf2);
-+
-+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
-+ else
-+ rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
-+ }
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, ®);
-+ rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-+ rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14);
-+ rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
-+ rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg);
-+
-+ tx_pin = 0;
-+
-+ /* Turn on unused PA or LNA when not using 1T or 1R */
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) != 1) {
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-+ }
-+
-+ /* Turn on unused PA or LNA when not using 1T or 1R */
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) != 1) {
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-+ }
-+
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-+
-+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
-+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-+ rt2800pci_bbp_write(rt2x00dev, 3, bbp);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+ if (conf_is_ht40(conf)) {
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
-+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
-+ } else {
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-+ rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
-+ }
-+ }
-+
-+ msleep(1);
-+}
-+
-+static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev,
-+ const int txpower)
-+{
-+ u32 reg;
-+ u32 value = TXPOWER_G_TO_DEV(txpower);
-+ u8 r1;
-+
-+ rt2800pci_bbp_read(rt2x00dev, 1, &r1);
-+ rt2x00_set_field8(®, BBP1_TX_POWER, 0);
-+ rt2800pci_bbp_write(rt2x00dev, 1, r1);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-+}
-+
-+static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT,
-+ libconf->conf->short_frame_max_tx_count);
-+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
-+ libconf->conf->long_frame_max_tx_count);
-+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-+ rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-+ rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
-+ rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-+ rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg);
-+}
-+
-+static void rt2800pci_config_duration(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
-+ libconf->conf->beacon_int * 16);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+}
-+
-+static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ enum dev_state state =
-+ (libconf->conf->flags & IEEE80211_CONF_PS) ?
-+ STATE_SLEEP : STATE_AWAKE;
-+ u32 reg;
-+
-+ if (state == STATE_SLEEP) {
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-+ libconf->conf->listen_interval - 1);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-+
-+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-+ } else {
-+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-+ }
-+}
-+
-+static void rt2800pci_config(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf,
-+ const unsigned int flags)
-+{
-+ /* Always recalculate LNA gain before changing configuration */
-+ rt2800pci_config_lna_gain(rt2x00dev, libconf);
-+
-+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-+ rt2800pci_config_channel(rt2x00dev, libconf->conf,
-+ &libconf->rf, &libconf->channel);
-+ if (flags & IEEE80211_CONF_CHANGE_POWER)
-+ rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level);
-+ if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-+ rt2800pci_config_retry_limit(rt2x00dev, libconf);
-+ if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-+ rt2800pci_config_duration(rt2x00dev, libconf);
-+ if (flags & IEEE80211_CONF_CHANGE_PS)
-+ rt2800pci_config_ps(rt2x00dev, libconf);
-+}
-+
-+/*
-+ * Link tuning
-+ */
-+static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Update FCS error count from register.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®);
-+ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-+}
-+
-+static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-+{
-+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
-+ return 0x2e + rt2x00dev->lna_gain;
-+
-+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-+ else
-+ return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-+}
-+
-+static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual, u8 vgc_level)
-+{
-+ if (qual->vgc_level != vgc_level) {
-+ rt2800pci_bbp_write(rt2x00dev, 66, vgc_level);
-+ qual->vgc_level = vgc_level;
-+ qual->vgc_level_reg = vgc_level;
-+ }
-+}
-+
-+static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual)
-+{
-+ rt2800pci_set_vgc(rt2x00dev, qual,
-+ rt2800pci_get_default_vgc(rt2x00dev));
-+}
-+
-+static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual, const u32 count)
-+{
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-+ return;
-+
-+ /*
-+ * When RSSI is better then -80 increase VGC level with 0x10
-+ */
-+ rt2800pci_set_vgc(rt2x00dev, qual,
-+ rt2800pci_get_default_vgc(rt2x00dev) +
-+ ((qual->rssi > -80) * 0x10));
-+}
-+
-+/*
-+ * Firmware functions
-+ */
-+static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
-+{
-+ return FIRMWARE_RT2860;
-+}
-+
-+static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
-+ const u8 *data, const size_t len)
-+{
-+ u16 fw_crc;
-+ u16 crc;
-+
-+ /*
-+ * Only support 8kb firmware files.
-+ */
-+ if (len != 8192)
-+ return FW_BAD_LENGTH;
-+
-+ /*
-+ * The last 2 bytes in the firmware array are the crc checksum itself,
-+ * this means that we should never pass those 2 bytes to the crc
-+ * algorithm.
-+ */
-+ fw_crc = (data[len - 2] << 8 | data[len - 1]);
-+
-+ /*
-+ * Use the crc ccitt algorithm.
-+ * This will return the same value as the legacy driver which
-+ * used bit ordering reversion on the both the firmware bytes
-+ * before input input as well as on the final output.
-+ * Obviously using crc ccitt directly is much more efficient.
-+ */
-+ crc = crc_ccitt(~0, data, len - 2);
-+
-+ /*
-+ * There is a small difference between the crc-itu-t + bitrev and
-+ * the crc-ccitt crc calculation. In the latter method the 2 bytes
-+ * will be swapped, use swab16 to convert the crc to the correct
-+ * value.
-+ */
-+ crc = swab16(crc);
-+
-+ return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
-+}
-+
-+static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
-+ const u8 *data, const size_t len)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ /*
-+ * Wait for stable hardware.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
-+ if (reg && reg != ~0)
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "Unstable hardware.\n");
-+ return -EBUSY;
-+ }
-+
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
-+
-+ /*
-+ * Disable DMA, will be reenabled later when enabling
-+ * the radio.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ /*
-+ * enable Host program ram write selection
-+ */
-+ reg = 0;
-+ rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
-+
-+ /*
-+ * Write firmware to device.
-+ */
-+ rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
-+ data, len);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
-+
-+ /*
-+ * Wait for device to stabilize.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
-+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "PBF system register not ready.\n");
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Disable interrupts
-+ */
-+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
-+
-+ /*
-+ * Initialize BBP R/W access agent
-+ */
-+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Initialization functions.
-+ */
-+static bool rt2800pci_get_entry_state(struct queue_entry *entry)
-+{
-+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ u32 word;
-+
-+ if (entry->queue->qid == QID_RX) {
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+
-+ return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
-+ } else {
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+
-+ return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
-+ }
-+}
-+
-+static void rt2800pci_clear_entry(struct queue_entry *entry)
-+{
-+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ u32 word;
-+
-+ if (entry->queue->qid == QID_RX) {
-+ rt2x00_desc_read(entry_priv->desc, 0, &word);
-+ rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
-+ rt2x00_desc_write(entry_priv->desc, 0, word);
-+
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+ rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
-+ rt2x00_desc_write(entry_priv->desc, 1, word);
-+ } else {
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
-+ rt2x00_desc_write(entry_priv->desc, 1, word);
-+ }
-+}
-+
-+static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct queue_entry_priv_pci *entry_priv;
-+ u32 reg;
-+
-+ /*
-+ * Initialize registers.
-+ */
-+ entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
-+
-+ entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
-+
-+ entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
-+
-+ entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
-+
-+ entry_priv = rt2x00dev->rx->entries[0].priv_data;
-+ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
-+ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
-+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
-+ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
-+
-+ /*
-+ * Enable global DMA configuration
-+ */
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ unsigned int i;
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
-+
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-+
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, ®);
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-+ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, ®);
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-+ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-+
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
-+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, ®);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
-+ rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-+ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
-+ else
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
-+ rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-+
-+ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-+ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-+ rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
-+ IEEE80211_MAX_RTS_THRESHOLD);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-+
-+ /*
-+ * ASIC will keep garbage value after boot, clear encryption keys.
-+ */
-+ for (i = 0; i < 256; i++) {
-+ u32 wcid[2] = { 0xffffffff, 0x00ffffff };
-+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
-+ wcid, sizeof(wcid));
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
-+ rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
-+ }
-+
-+ for (i = 0; i < 16; i++)
-+ rt2x00pci_register_write(rt2x00dev,
-+ SHARED_KEY_MODE_ENTRY(i), 0);
-+
-+ /*
-+ * Clear all beacons
-+ * For the Beacon base registers we only need to clear
-+ * the first byte since that byte contains the VALID and OWNER
-+ * bits which (when set to 0) will invalidate the entire beacon.
-+ */
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-+
-+ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, ®);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6);
-+ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, ®);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14);
-+ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, ®);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14);
-+ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, ®);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2);
-+ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-+
-+ /*
-+ * We must clear the error counters.
-+ * These registers are cleared on read,
-+ * so we may pass a useless variable to store the value.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®);
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, ®);
-+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, ®);
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, ®);
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, ®);
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, ®);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, ®);
-+ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
-+ return 0;
-+
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u8 value;
-+
-+ /*
-+ * BBP was enabled after firmware was loaded,
-+ * but we need to reactivate it now.
-+ */
-+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-+ msleep(1);
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800pci_bbp_read(rt2x00dev, 0, &value);
-+ if ((value != 0xff) && (value != 0x00))
-+ return 0;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u16 eeprom;
-+ u8 reg_id;
-+ u8 value;
-+
-+ if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) ||
-+ rt2800pci_wait_bbp_ready(rt2x00dev)))
-+ return -EACCES;
-+
-+ rt2800pci_bbp_write(rt2x00dev, 65, 0x2c);
-+ rt2800pci_bbp_write(rt2x00dev, 66, 0x38);
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x12);
-+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x10);
-+ rt2800pci_bbp_write(rt2x00dev, 81, 0x37);
-+ rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800pci_bbp_write(rt2x00dev, 83, 0x6a);
-+ rt2800pci_bbp_write(rt2x00dev, 84, 0x99);
-+ rt2800pci_bbp_write(rt2x00dev, 86, 0x00);
-+ rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
-+ rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
-+ rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
-+ rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
-+ rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
-+ }
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
-+ rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
-+
-+ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
-+ rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
-+ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
-+ rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
-+ }
-+
-+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-+
-+ if (eeprom != 0xffff && eeprom != 0x0000) {
-+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
-+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-+ rt2800pci_bbp_write(rt2x00dev, reg_id, value);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-+ bool bw40, u8 rfcsr24, u8 filter_target)
-+{
-+ unsigned int i;
-+ u8 bbp;
-+ u8 rfcsr;
-+ u8 passband;
-+ u8 stopband;
-+ u8 overtuned = 0;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /*
-+ * Set power & frequency of passband test tone
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
-+
-+ for (i = 0; i < 100; i++) {
-+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-+ msleep(1);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 55, &passband);
-+ if (passband)
-+ break;
-+ }
-+
-+ /*
-+ * Set power & frequency of stopband test tone
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
-+
-+ for (i = 0; i < 100; i++) {
-+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
-+ msleep(1);
-+
-+ rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
-+
-+ if ((passband - stopband) <= filter_target) {
-+ rfcsr24++;
-+ overtuned += ((passband - stopband) == filter_target);
-+ } else
-+ break;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+ }
-+
-+ rfcsr24 -= !!overtuned;
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+ return rfcsr24;
-+}
-+
-+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-+{
-+ u8 rfcsr;
-+ u8 bbp;
-+
-+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3022))
-+ return 0;
-+
-+ /*
-+ * Init RF calibration.
-+ */
-+ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-+ msleep(1);
-+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
-+
-+ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
-+ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
-+ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
-+ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
-+ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
-+ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
-+ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
-+ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
-+ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
-+ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
-+ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
-+ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
-+ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
-+ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
-+ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
-+ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
-+ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
-+ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
-+ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
-+ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
-+ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
-+ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
-+ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
-+ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
-+ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
-+ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
-+ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
-+ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
-+ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
-+ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
-+
-+ /*
-+ * Set RX Filter calibration for 20MHz and 40MHz
-+ */
-+ rt2x00dev->calibration_bw20 =
-+ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-+ rt2x00dev->calibration_bw40 =
-+ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-+
-+ /*
-+ * Set back to initial state
-+ */
-+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
-+
-+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /*
-+ * set BBP back to BW20
-+ */
-+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Device state switch handlers.
-+ */
-+static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX,
-+ (state == STATE_RADIO_RX_ON) ||
-+ (state == STATE_RADIO_RX_ON_LINK));
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+}
-+
-+static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ int mask = (state == STATE_RADIO_IRQ_ON);
-+ u32 reg;
-+
-+ /*
-+ * When interrupts are being enabled, the interrupt registers
-+ * should clear the register to assure a clean state.
-+ */
-+ if (state == STATE_RADIO_IRQ_ON) {
-+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
-+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-+ }
-+
-+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask);
-+ rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask);
-+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
-+}
-+
-+static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-+ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-+ return 0;
-+
-+ msleep(1);
-+ }
-+
-+ ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ u16 word;
-+
-+ /*
-+ * Initialize all registers.
-+ */
-+ if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
-+ rt2800pci_init_queues(rt2x00dev) ||
-+ rt2800pci_init_registers(rt2x00dev) ||
-+ rt2800pci_wait_wpdma_ready(rt2x00dev) ||
-+ rt2800pci_init_bbp(rt2x00dev) ||
-+ rt2800pci_init_rfcsr(rt2x00dev)))
-+ return -EIO;
-+
-+ /*
-+ * Send signal to firmware during boot time.
-+ */
-+ rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
-+
-+ /*
-+ * Enable RX.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0);
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ /*
-+ * Initialize LED control
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ return 0;
-+}
-+
-+static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
-+
-+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
-+
-+ /* Wait for DMA, ignore error */
-+ rt2800pci_wait_wpdma_ready(rt2x00dev);
-+}
-+
-+static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-+
-+ if (state == STATE_AWAKE) {
-+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
-+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
-+ } else
-+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ int retval = 0;
-+
-+ switch (state) {
-+ case STATE_RADIO_ON:
-+ /*
-+ * Before the radio can be enabled, the device first has
-+ * to be woken up. After that it needs a bit of time
-+ * to be fully awake and the radio can be enabled.
-+ */
-+ rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
-+ msleep(1);
-+ retval = rt2800pci_enable_radio(rt2x00dev);
-+ break;
-+ case STATE_RADIO_OFF:
-+ /*
-+ * After the radio has been disablee, the device should
-+ * be put to sleep for powersaving.
-+ */
-+ rt2800pci_disable_radio(rt2x00dev);
-+ rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
-+ break;
-+ case STATE_RADIO_RX_ON:
-+ case STATE_RADIO_RX_ON_LINK:
-+ case STATE_RADIO_RX_OFF:
-+ case STATE_RADIO_RX_OFF_LINK:
-+ rt2800pci_toggle_rx(rt2x00dev, state);
-+ break;
-+ case STATE_RADIO_IRQ_ON:
-+ case STATE_RADIO_IRQ_OFF:
-+ rt2800pci_toggle_irq(rt2x00dev, state);
-+ break;
-+ case STATE_DEEP_SLEEP:
-+ case STATE_SLEEP:
-+ case STATE_STANDBY:
-+ case STATE_AWAKE:
-+ retval = rt2800pci_set_state(rt2x00dev, state);
-+ break;
-+ default:
-+ retval = -ENOTSUPP;
-+ break;
-+ }
-+
-+ if (unlikely(retval))
-+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
-+ state, retval);
-+
-+ return retval;
-+}
-+
-+/*
-+ * TX descriptor initialization
-+ */
-+static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
-+ struct sk_buff *skb,
-+ struct txentry_desc *txdesc)
-+{
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-+ __le32 *txd = skbdesc->desc;
-+ __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->hw->extra_tx_headroom);
-+ u32 word;
-+
-+ /*
-+ * Initialize TX Info descriptor
-+ */
-+ rt2x00_desc_read(txwi, 0, &word);
-+ rt2x00_set_field32(&word, TXWI_W0_FRAG,
-+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
-+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
-+ rt2x00_set_field32(&word, TXWI_W0_TS,
-+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
-+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
-+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
-+ rt2x00_set_field32(&word, TXWI_W0_BW,
-+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
-+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
-+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
-+ rt2x00_desc_write(txwi, 0, word);
-+
-+ rt2x00_desc_read(txwi, 1, &word);
-+ rt2x00_set_field32(&word, TXWI_W1_ACK,
-+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
-+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
-+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
-+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
-+ txdesc->key_idx : 0xff);
-+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, skb->len);
-+ rt2x00_set_field32(&word, TXWI_W1_PACKETID,
-+ skbdesc->entry->queue->qid);
-+ rt2x00_desc_write(txwi, 1, word);
-+
-+ /*
-+ * Always write 0 to IV/EIV fields, hardware will insert the IV
-+ * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0.
-+ * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data
-+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
-+ * crypto entry in the registers should be used to encrypt the frame.
-+ */
-+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
-+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
-+
-+ /*
-+ * Initialize TX descriptor
-+ */
-+ rt2x00_desc_read(txd, 0, &word);
-+ rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
-+ rt2x00_desc_write(txd, 0, word);
-+
-+ rt2x00_desc_read(txd, 1, &word);
-+ rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len);
-+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1);
-+ rt2x00_set_field32(&word, TXD_W1_BURST,
-+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
-+ rt2x00dev->hw->extra_tx_headroom);
-+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC0,
-+ !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
-+ rt2x00_desc_write(txd, 1, word);
-+
-+ rt2x00_desc_read(txd, 2, &word);
-+ rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
-+ skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom);
-+ rt2x00_desc_write(txd, 2, word);
-+
-+ rt2x00_desc_read(txd, 3, &word);
-+ rt2x00_set_field32(&word, TXD_W3_WIV,
-+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
-+ rt2x00_desc_write(txd, 3, word);
-+}
-+
-+/*
-+ * TX data initialization
-+ */
-+static void rt2800pci_write_beacon(struct queue_entry *entry)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ unsigned int beacon_base;
-+ u32 reg;
-+
-+ /*
-+ * Disable beaconing while we are reloading the beacon data,
-+ * otherwise we might be sending out invalid data.
-+ */
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+
-+ /*
-+ * Write entire beacon with descriptor to register.
-+ */
-+ beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-+ rt2x00pci_register_multiwrite(rt2x00dev,
-+ beacon_base,
-+ skbdesc->desc, skbdesc->desc_len);
-+ rt2x00pci_register_multiwrite(rt2x00dev,
-+ beacon_base + skbdesc->desc_len,
-+ entry->skb->data, entry->skb->len);
-+
-+ /*
-+ * Clean up beacon skb.
-+ */
-+ dev_kfree_skb_any(entry->skb);
-+ entry->skb = NULL;
-+}
-+
-+static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-+ const enum data_queue_qid queue_idx)
-+{
-+ struct data_queue *queue;
-+ unsigned int idx, qidx = 0;
-+ u32 reg;
-+
-+ if (queue_idx == QID_BEACON) {
-+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+ }
-+ return;
-+ }
-+
-+ if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
-+ return;
-+
-+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-+ idx = queue->index[Q_INDEX];
-+
-+ if (queue_idx == QID_MGMT)
-+ qidx = 5;
-+ else
-+ qidx = queue_idx;
-+
-+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
-+}
-+
-+static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
-+ const enum data_queue_qid qid)
-+{
-+ u32 reg;
-+
-+ if (qid == QID_BEACON) {
-+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0);
-+ return;
-+ }
-+
-+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
-+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
-+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-+}
-+
-+/*
-+ * RX control handlers
-+ */
-+static void rt2800pci_fill_rxdone(struct queue_entry *entry,
-+ struct rxdone_entry_desc *rxdesc)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ __le32 *rxd = entry_priv->desc;
-+ __le32 *rxwi = (__le32 *)entry->skb->data;
-+ u32 rxd3;
-+ u32 rxwi0;
-+ u32 rxwi1;
-+ u32 rxwi2;
-+ u32 rxwi3;
-+
-+ rt2x00_desc_read(rxd, 3, &rxd3);
-+ rt2x00_desc_read(rxwi, 0, &rxwi0);
-+ rt2x00_desc_read(rxwi, 1, &rxwi1);
-+ rt2x00_desc_read(rxwi, 2, &rxwi2);
-+ rt2x00_desc_read(rxwi, 3, &rxwi3);
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
-+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
-+
-+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-+ /*
-+ * Unfortunately we don't know the cipher type used during
-+ * decryption. This prevents us from correct providing
-+ * correct statistics through debugfs.
-+ */
-+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-+ rxdesc->cipher_status =
-+ rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
-+ }
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
-+ /*
-+ * Hardware has stripped IV/EIV data from 802.11 frame during
-+ * decryption. Unfortunately the descriptor doesn't contain
-+ * any fields with the EIV/IV data either, so they can't
-+ * be restored by rt2x00lib.
-+ */
-+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-+
-+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
-+ rxdesc->flags |= RX_FLAG_DECRYPTED;
-+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
-+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
-+ }
-+
-+ if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
-+ rxdesc->dev_flags |= RXDONE_MY_BSS;
-+
-+ if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
-+ rxdesc->flags |= RX_FLAG_SHORT_GI;
-+
-+ if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
-+ rxdesc->flags |= RX_FLAG_40MHZ;
-+
-+ /*
-+ * Detect RX rate, always use MCS as signal type.
-+ */
-+ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
-+ rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
-+ rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
-+
-+ /*
-+ * Mask of 0x8 bit to remove the short preamble flag.
-+ */
-+ if (rxdesc->rate_mode == RATE_MODE_CCK)
-+ rxdesc->signal &= ~0x8;
-+
-+ rxdesc->rssi =
-+ (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
-+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
-+
-+ rxdesc->noise =
-+ (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
-+ rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
-+
-+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
-+
-+ /*
-+ * Set RX IDX in register to inform hardware that we have handled
-+ * this entry and it is available for reuse again.
-+ */
-+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
-+
-+ /*
-+ * Remove TXWI descriptor from start of buffer.
-+ */
-+ skb_pull(entry->skb, RXWI_DESC_SIZE);
-+ skb_trim(entry->skb, rxdesc->size);
-+}
-+
-+/*
-+ * Interrupt functions.
-+ */
-+static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct data_queue *queue;
-+ struct queue_entry *entry;
-+ struct queue_entry *entry_done;
-+ struct queue_entry_priv_pci *entry_priv;
-+ struct txdone_entry_desc txdesc;
-+ u32 word;
-+ u32 reg;
-+ u32 old_reg;
-+ int type;
-+ int index;
-+
-+ /*
-+ * During each loop we will compare the freshly read
-+ * TX_STA_FIFO register value with the value read from
-+ * the previous loop. If the 2 values are equal then
-+ * we should stop processing because the chance it
-+ * quite big that the device has been unplugged and
-+ * we risk going into an endless loop.
-+ */
-+ old_reg = 0;
-+
-+ while (1) {
-+ rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, ®);
-+ if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
-+ break;
-+
-+ if (old_reg == reg)
-+ break;
-+ old_reg = reg;
-+
-+ /*
-+ * Skip this entry when it contains an invalid
-+ * queue identication number.
-+ */
-+ type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-+ queue = rt2x00queue_get_queue(rt2x00dev, type);
-+ if (unlikely(!queue))
-+ continue;
-+
-+ /*
-+ * Skip this entry when it contains an invalid
-+ * index number.
-+ */
-+ index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
-+ if (unlikely(index >= queue->limit))
-+ continue;
-+
-+ entry = &queue->entries[index];
-+ entry_priv = entry->priv_data;
-+ rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word);
-+
-+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+ while (entry != entry_done) {
-+ /*
-+ * Catch up.
-+ * Just report any entries we missed as failed.
-+ */
-+ WARNING(rt2x00dev,
-+ "TX status report missed for entry %d\n",
-+ entry_done->entry_idx);
-+
-+ txdesc.flags = 0;
-+ __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
-+ txdesc.retry = 0;
-+
-+ rt2x00lib_txdone(entry_done, &txdesc);
-+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-+ }
-+
-+ /*
-+ * Obtain the status about this packet.
-+ */
-+ txdesc.flags = 0;
-+ if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS))
-+ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
-+ else
-+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
-+ txdesc.retry = rt2x00_get_field32(word, TXWI_W0_MCS);
-+
-+ rt2x00lib_txdone(entry, &txdesc);
-+ }
-+}
-+
-+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
-+{
-+ struct rt2x00_dev *rt2x00dev = dev_instance;
-+ u32 reg;
-+
-+ /* Read status and ACK all interrupts */
-+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
-+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
-+
-+ if (!reg)
-+ return IRQ_NONE;
-+
-+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-+ return IRQ_HANDLED;
-+
-+ /*
-+ * 1 - Rx ring done interrupt.
-+ */
-+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
-+ rt2x00pci_rxdone(rt2x00dev);
-+
-+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
-+ rt2800pci_txdone(rt2x00dev);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Device probe functions.
-+ */
-+static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
-+{
-+ u16 word;
-+ u8 *mac;
-+ u8 default_lna_gain;
-+
-+ /*
-+ * Read EEPROM into buffer
-+ */
-+ switch(rt2x00dev->chip.rt) {
-+ case RT2880:
-+ case RT3052:
-+ rt2800pci_read_eeprom_soc(rt2x00dev);
-+ break;
-+ default:
-+ rt2800pci_read_eeprom_pci(rt2x00dev);
-+ break;
-+ }
-+
-+ /*
-+ * Start validation of the data that has been read.
-+ */
-+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
-+ if (!is_valid_ether_addr(mac)) {
-+ DECLARE_MAC_BUF(macbuf);
-+
-+ random_ether_addr(mac);
-+ EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
-+ if (word == 0xffff) {
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-+ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
-+ } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
-+ /*
-+ * There is a max of 2 RX streams for RT2860 series
-+ */
-+ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
-+ if (word == 0xffff) {
-+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
-+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
-+ if ((word & 0x00ff) == 0x00ff) {
-+ rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
-+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
-+ LED_MODE_TXRX_ACTIVITY);
-+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
-+ EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
-+ }
-+
-+ /*
-+ * During the LNA validation we are going to use
-+ * lna0 as correct value. Note that EEPROM_LNA
-+ * is never validated.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
-+ default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
-+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
-+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-+ default_lna_gain);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
-+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
-+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-+ default_lna_gain);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ u16 value;
-+ u16 eeprom;
-+
-+ /*
-+ * Read EEPROM word for configuration.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ /*
-+ * Identify RF chipset.
-+ */
-+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®);
-+ rt2x00_set_chip_rf(rt2x00dev, value, reg);
-+
-+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
-+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Read frequency offset and RF programming sequence.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
-+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-+
-+ /*
-+ * Read external LNA informations.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
-+ __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
-+ __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-+
-+ /*
-+ * Detect if this device has an hardware controlled radio.
-+ */
-+#ifdef CONFIG_RT2X00_LIB_RFKILL
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
-+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-+
-+ /*
-+ * Store led settings, for correct led behaviour.
-+ */
-+#ifdef CONFIG_RT2X00_LIB_LEDS
-+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
-+#endif /* CONFIG_RT2X00_LIB_LEDS */
-+
-+ return 0;
-+}
-+
-+/*
-+ * RF value list for rt2860
-+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
-+ */
-+static const struct rf_channel rf_vals[] = {
-+ { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
-+ { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
-+ { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
-+ { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
-+ { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
-+ { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
-+ { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
-+ { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
-+ { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
-+ { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
-+ { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
-+ { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
-+ { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
-+ { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
-+
-+ /* 802.11 UNI / HyperLan 2 */
-+ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
-+ { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
-+ { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
-+ { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
-+ { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
-+ { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
-+ { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
-+ { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
-+ { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
-+ { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
-+ { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
-+ { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
-+
-+ /* 802.11 HyperLan 2 */
-+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
-+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
-+ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
-+ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
-+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
-+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
-+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
-+ { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
-+ { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
-+ { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
-+ { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
-+ { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
-+ { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
-+ { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
-+ { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
-+ { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
-+
-+ /* 802.11 UNII */
-+ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
-+ { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
-+ { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
-+ { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
-+ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
-+ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
-+ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
-+
-+ /* 802.11 Japan */
-+ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
-+ { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
-+ { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
-+ { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
-+ { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
-+ { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
-+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
-+};
-+
-+static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct hw_mode_spec *spec = &rt2x00dev->spec;
-+ struct channel_info *info;
-+ char *tx_power1;
-+ char *tx_power2;
-+ unsigned int i;
-+ u16 eeprom;
-+
-+ /*
-+ * Initialize all hw fields.
-+ */
-+ rt2x00dev->hw->flags =
-+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-+ IEEE80211_HW_SIGNAL_DBM |
-+ IEEE80211_HW_SUPPORTS_PS |
-+ IEEE80211_HW_PS_NULLFUNC_STACK;
-+ rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE;
-+
-+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
-+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
-+ rt2x00_eeprom_addr(rt2x00dev,
-+ EEPROM_MAC_ADDR_0));
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ /*
-+ * Initialize hw_mode information.
-+ */
-+ spec->supported_bands = SUPPORT_BAND_2GHZ;
-+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-+
-+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2720) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF3021) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF3022)) {
-+ spec->num_channels = 14;
-+ spec->channels = rf_vals;
-+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2750)) {
-+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
-+ spec->num_channels = ARRAY_SIZE(rf_vals);
-+ spec->channels = rf_vals;
-+ }
-+
-+ /*
-+ * Initialize HT information.
-+ */
-+ spec->ht.ht_supported = true;
-+ spec->ht.cap =
-+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-+ IEEE80211_HT_CAP_GRN_FLD |
-+ IEEE80211_HT_CAP_SGI_20 |
-+ IEEE80211_HT_CAP_SGI_40 |
-+ IEEE80211_HT_CAP_TX_STBC |
-+ IEEE80211_HT_CAP_RX_STBC |
-+ IEEE80211_HT_CAP_PSMP_SUPPORT;
-+ spec->ht.ampdu_factor = 3;
-+ spec->ht.ampdu_density = 4;
-+ spec->ht.mcs.tx_params =
-+ IEEE80211_HT_MCS_TX_DEFINED |
-+ IEEE80211_HT_MCS_TX_RX_DIFF |
-+ ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
-+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-+
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
-+ case 3:
-+ spec->ht.mcs.rx_mask[2] = 0xff;
-+ case 2:
-+ spec->ht.mcs.rx_mask[1] = 0xff;
-+ case 1:
-+ spec->ht.mcs.rx_mask[0] = 0xff;
-+ spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
-+ break;
-+ }
-+
-+ /*
-+ * Create channel information array
-+ */
-+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ spec->channels_info = info;
-+
-+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
-+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
-+
-+ for (i = 0; i < 14; i++) {
-+ info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
-+ info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
-+ }
-+
-+ if (spec->num_channels > 14) {
-+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
-+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
-+
-+ for (i = 14; i < spec->num_channels; i++) {
-+ info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
-+ info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
-+{
-+ int retval;
-+
-+ /*
-+ * Allocate eeprom data.
-+ */
-+ retval = rt2800pci_validate_eeprom(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ retval = rt2800pci_init_eeprom(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * Initialize hw specifications.
-+ */
-+ retval = rt2800pci_probe_hw_mode(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * This device requires firmware.
-+ */
-+ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
-+ !rt2x00_rt(&rt2x00dev->chip, RT3052))
-+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
-+ if (!modparam_nohwcrypt)
-+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
-+
-+ /*
-+ * Set the rssi offset.
-+ */
-+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-+
-+ return 0;
-+}
-+
-+/*
-+ * IEEE80211 stack callback functions.
-+ */
-+static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-+ u32 *iv32, u16 *iv16)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ struct mac_iveiv_entry iveiv_entry;
-+ u32 offset;
-+
-+ offset = MAC_IVEIV_ENTRY(hw_key_idx);
-+ rt2x00pci_register_multiread(rt2x00dev, offset,
-+ &iveiv_entry, sizeof(iveiv_entry));
-+
-+ memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
-+ memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-+}
-+
-+static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ u32 reg;
-+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-+
-+ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
-+ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-+ const struct ieee80211_tx_queue_params *params)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ struct data_queue *queue;
-+ struct rt2x00_field32 field;
-+ int retval;
-+ u32 reg;
-+ u32 offset;
-+
-+ /*
-+ * First pass the configuration through rt2x00lib, that will
-+ * update the queue settings and validate the input. After that
-+ * we are free to update the registers based on the value
-+ * in the queue parameter.
-+ */
-+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * We only need to perform additional register initialization
-+ * for WMM queues/
-+ */
-+ if (queue_idx >= 4)
-+ return 0;
-+
-+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-+
-+ /* Update WMM TXOP register */
-+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
-+ field.bit_offset = (queue_idx & 1) * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, field, queue->txop);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ /* Update WMM registers */
-+ field.bit_offset = queue_idx * 4;
-+ field.bit_mask = 0xf << field.bit_offset;
-+
-+ rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->aifs);
-+ rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->cw_min);
-+ rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-+
-+ rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->cw_max);
-+ rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-+
-+ /* Update EDCA registers */
-+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-+
-+ rt2x00pci_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-+ rt2x00pci_register_write(rt2x00dev, offset, reg);
-+
-+ return 0;
-+}
-+
-+static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ u64 tsf;
-+ u32 reg;
-+
-+ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, ®);
-+ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-+ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, ®);
-+ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-+
-+ return tsf;
-+}
-+
-+static const struct ieee80211_ops rt2800pci_mac80211_ops = {
-+ .tx = rt2x00mac_tx,
-+ .start = rt2x00mac_start,
-+ .stop = rt2x00mac_stop,
-+ .add_interface = rt2x00mac_add_interface,
-+ .remove_interface = rt2x00mac_remove_interface,
-+ .config = rt2x00mac_config,
-+ .config_interface = rt2x00mac_config_interface,
-+ .configure_filter = rt2x00mac_configure_filter,
-+ .set_key = rt2x00mac_set_key,
-+ .get_stats = rt2x00mac_get_stats,
-+ .get_tkip_seq = rt2800pci_get_tkip_seq,
-+ .set_rts_threshold = rt2800pci_set_rts_threshold,
-+ .bss_info_changed = rt2x00mac_bss_info_changed,
-+ .conf_tx = rt2800pci_conf_tx,
-+ .get_tx_stats = rt2x00mac_get_tx_stats,
-+ .get_tsf = rt2800pci_get_tsf,
-+};
-+
-+static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
-+ .irq_handler = rt2800pci_interrupt,
-+ .probe_hw = rt2800pci_probe_hw,
-+ .get_firmware_name = rt2800pci_get_firmware_name,
-+ .check_firmware = rt2800pci_check_firmware,
-+ .load_firmware = rt2800pci_load_firmware,
-+ .initialize = rt2x00pci_initialize,
-+ .uninitialize = rt2x00pci_uninitialize,
-+ .get_entry_state = rt2800pci_get_entry_state,
-+ .clear_entry = rt2800pci_clear_entry,
-+ .set_device_state = rt2800pci_set_device_state,
-+ .rfkill_poll = rt2800pci_rfkill_poll,
-+ .link_stats = rt2800pci_link_stats,
-+ .reset_tuner = rt2800pci_reset_tuner,
-+ .link_tuner = rt2800pci_link_tuner,
-+ .write_tx_desc = rt2800pci_write_tx_desc,
-+ .write_tx_data = rt2x00pci_write_tx_data,
-+ .write_beacon = rt2800pci_write_beacon,
-+ .kick_tx_queue = rt2800pci_kick_tx_queue,
-+ .kill_tx_queue = rt2800pci_kill_tx_queue,
-+ .fill_rxdone = rt2800pci_fill_rxdone,
-+ .config_shared_key = rt2800pci_config_shared_key,
-+ .config_pairwise_key = rt2800pci_config_pairwise_key,
-+ .config_filter = rt2800pci_config_filter,
-+ .config_intf = rt2800pci_config_intf,
-+ .config_erp = rt2800pci_config_erp,
-+ .config_ant = rt2800pci_config_ant,
-+ .config = rt2800pci_config,
-+};
-+
-+static const struct data_queue_desc rt2800pci_queue_rx = {
-+ .entry_num = RX_ENTRIES,
-+ .data_size = AGGREGATION_SIZE,
-+ .desc_size = RXD_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_pci),
-+};
-+
-+static const struct data_queue_desc rt2800pci_queue_tx = {
-+ .entry_num = TX_ENTRIES,
-+ .data_size = AGGREGATION_SIZE,
-+ .desc_size = TXD_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_pci),
-+};
-+
-+static const struct data_queue_desc rt2800pci_queue_bcn = {
-+ .entry_num = 8 * BEACON_ENTRIES,
-+ .data_size = 0, /* No DMA required for beacons */
-+ .desc_size = TXWI_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_pci),
-+};
-+
-+static const struct rt2x00_ops rt2800pci_ops = {
-+ .name = KBUILD_MODNAME,
-+ .max_sta_intf = 1,
-+ .max_ap_intf = 8,
-+ .eeprom_size = EEPROM_SIZE,
-+ .rf_size = RF_SIZE,
-+ .tx_queues = NUM_TX_QUEUES,
-+ .rx = &rt2800pci_queue_rx,
-+ .tx = &rt2800pci_queue_tx,
-+ .bcn = &rt2800pci_queue_bcn,
-+ .lib = &rt2800pci_rt2x00_ops,
-+ .hw = &rt2800pci_mac80211_ops,
-+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-+ .debugfs = &rt2800pci_rt2x00debug,
-+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-+};
-+
-+/*
-+ * RT2800pci module information.
-+ */
-+static struct pci_device_id rt2800pci_device_table[] = {
-+ { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
-+ { 0, }
-+};
-+
-+MODULE_AUTHOR(DRV_PROJECT);
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
-+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-+#ifdef CONFIG_RT2800PCI_PCI
-+MODULE_FIRMWARE(FIRMWARE_RT2860);
-+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
-+#endif /* CONFIG_RT2800PCI_PCI */
-+MODULE_LICENSE("GPL");
-+
-+#ifdef CONFIG_RT2800PCI_WISOC
-+#if defined(CONFIG_RALINK_RT288X)
-+__rt2x00soc_probe(RT2880, &rt2800pci_ops);
-+#elif defined(CONFIG_RALINK_RT305X)
-+__rt2x00soc_probe(RT3052, &rt2800pci_ops);
-+#endif
-+
-+static struct platform_driver rt2800soc_driver = {
-+ .driver = {
-+ .name = "rt2800_wmac",
-+ .owner = THIS_MODULE,
-+ .mod_name = KBUILD_MODNAME,
-+ },
-+ .probe = __rt2x00soc_probe,
-+ .remove = __devexit_p(rt2x00soc_remove),
-+ .suspend = rt2x00soc_suspend,
-+ .resume = rt2x00soc_resume,
-+};
-+#endif /* CONFIG_RT2800PCI_WISOC */
-+
-+#ifdef CONFIG_RT2800PCI_PCI
-+static struct pci_driver rt2800pci_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = rt2800pci_device_table,
-+ .probe = rt2x00pci_probe,
-+ .remove = __devexit_p(rt2x00pci_remove),
-+ .suspend = rt2x00pci_suspend,
-+ .resume = rt2x00pci_resume,
-+};
-+#endif /* CONFIG_RT2800PCI_PCI */
-+
-+static int __init rt2800pci_init(void)
-+{
-+ int ret = 0;
-+
-+#ifdef CONFIG_RT2800PCI_WISOC
-+ ret = platform_driver_register(&rt2800soc_driver);
-+ if (ret)
-+ return ret;
-+#endif
-+#ifdef CONFIG_RT2800PCI_PCI
-+ ret = pci_register_driver(&rt2800pci_driver);
-+ if (ret) {
-+#ifdef CONFIG_RT2800PCI_WISOC
-+ platform_driver_unregister(&rt2800soc_driver);
-+#endif
-+ return ret;
-+ }
-+#endif
-+
-+ return ret;
-+}
-+
-+static void __exit rt2800pci_exit(void)
-+{
-+#ifdef CONFIG_RT2800PCI_PCI
-+ pci_unregister_driver(&rt2800pci_driver);
-+#endif
-+#ifdef CONFIG_RT2800PCI_WISOC
-+ platform_driver_unregister(&rt2800soc_driver);
-+#endif
-+}
-+
-+module_init(rt2800pci_init);
-+module_exit(rt2800pci_exit);
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -0,0 +1,1927 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2800pci
-+ Abstract: Data structures and registers for the rt2800pci module.
-+ Supported chipsets: RT2800E & RT2800ED.
-+ */
-+
-+#ifndef RT2800PCI_H
-+#define RT2800PCI_H
-+
-+/*
-+ * RF chip defines.
-+ *
-+ * RF2820 2.4G 2T3R
-+ * RF2850 2.4G/5G 2T3R
-+ * RF2720 2.4G 1T2R
-+ * RF2750 2.4G/5G 1T2R
-+ * RF3020 2.4G 1T1R
-+ * RF2020 2.4G B/G
-+ * RF3021 2.4G 1T2R
-+ * RF3022 2.4G 2T2R
-+ */
-+#define RF2820 0x0001
-+#define RF2850 0x0002
-+#define RF2720 0x0003
-+#define RF2750 0x0004
-+#define RF3020 0x0005
-+#define RF2020 0x0006
-+#define RF3021 0x0007
-+#define RF3022 0x0008
-+
-+/*
-+ * RT2860 version
-+ */
-+#define RT2860C_VERSION 0x28600100
-+#define RT2860D_VERSION 0x28600101
-+#define RT2880E_VERSION 0x28720200
-+#define RT2883_VERSION 0x28830300
-+#define RT3070_VERSION 0x30700200
-+
-+/*
-+ * Signal information.
-+ * Defaul offset is required for RSSI <-> dBm conversion.
-+ */
-+#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
-+
-+/*
-+ * Register layout information.
-+ */
-+#define CSR_REG_BASE 0x1000
-+#define CSR_REG_SIZE 0x0800
-+#define EEPROM_BASE 0x0000
-+#define EEPROM_SIZE 0x0110
-+#define BBP_BASE 0x0000
-+#define BBP_SIZE 0x0080
-+#define RF_BASE 0x0004
-+#define RF_SIZE 0x0010
-+
-+/*
-+ * Number of TX queues.
-+ */
-+#define NUM_TX_QUEUES 4
-+
-+/*
-+ * PCI registers.
-+ */
-+
-+/*
-+ * E2PROM_CSR: EEPROM control register.
-+ * RELOAD: Write 1 to reload eeprom content.
-+ * TYPE: 0: 93c46, 1:93c66.
-+ * LOAD_STATUS: 1:loading, 0:done.
-+ */
-+#define E2PROM_CSR 0x0004
-+#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
-+#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
-+#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
-+#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
-+#define E2PROM_CSR_TYPE FIELD32(0x00000030)
-+#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
-+#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
-+
-+/*
-+ * HOST-MCU shared memory
-+ */
-+#define HOST_CMD_CSR 0x0404
-+#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
-+
-+/*
-+ * INT_SOURCE_CSR: Interrupt source register.
-+ * Write one to clear corresponding bit.
-+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
-+ */
-+#define INT_SOURCE_CSR 0x0200
-+#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001)
-+#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002)
-+#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004)
-+#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008)
-+#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010)
-+#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020)
-+#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040)
-+#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
-+#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
-+#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200)
-+#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400)
-+#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800)
-+#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000)
-+#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
-+#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000)
-+#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000)
-+#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000)
-+#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000)
-+
-+/*
-+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
-+ */
-+#define INT_MASK_CSR 0x0204
-+#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001)
-+#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002)
-+#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004)
-+#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008)
-+#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010)
-+#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020)
-+#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040)
-+#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
-+#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
-+#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200)
-+#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400)
-+#define INT_MASK_CSR_TBTT FIELD32(0x00000800)
-+#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000)
-+#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
-+#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000)
-+#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000)
-+#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000)
-+#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000)
-+
-+/*
-+ * WPDMA_GLO_CFG
-+ */
-+#define WPDMA_GLO_CFG 0x0208
-+#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001)
-+#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002)
-+#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004)
-+#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008)
-+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
-+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
-+#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080)
-+#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00)
-+#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000)
-+
-+/*
-+ * WPDMA_RST_IDX
-+ */
-+#define WPDMA_RST_IDX 0x020c
-+#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001)
-+#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002)
-+#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004)
-+#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008)
-+#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010)
-+#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020)
-+#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000)
-+
-+/*
-+ * DELAY_INT_CFG
-+ */
-+#define DELAY_INT_CFG 0x0210
-+#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff)
-+#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00)
-+#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000)
-+#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000)
-+#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000)
-+#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000)
-+
-+/*
-+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
-+ * AIFSN0: AC_BE
-+ * AIFSN1: AC_BK
-+ * AIFSN1: AC_VI
-+ * AIFSN1: AC_VO
-+ */
-+#define WMM_AIFSN_CFG 0x0214
-+#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
-+#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0)
-+#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00)
-+#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000)
-+
-+/*
-+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
-+ * CWMIN0: AC_BE
-+ * CWMIN1: AC_BK
-+ * CWMIN1: AC_VI
-+ * CWMIN1: AC_VO
-+ */
-+#define WMM_CWMIN_CFG 0x0218
-+#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
-+#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0)
-+#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00)
-+#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000)
-+
-+/*
-+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
-+ * CWMAX0: AC_BE
-+ * CWMAX1: AC_BK
-+ * CWMAX1: AC_VI
-+ * CWMAX1: AC_VO
-+ */
-+#define WMM_CWMAX_CFG 0x021c
-+#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
-+#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0)
-+#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00)
-+#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
-+
-+/*
-+ * AC_TXOP0: AC_BK/AC_BE TXOP register
-+ * AC0TXOP: AC_BK in unit of 32us
-+ * AC1TXOP: AC_BE in unit of 32us
-+ */
-+#define WMM_TXOP0_CFG 0x0220
-+#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
-+#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
-+
-+/*
-+ * AC_TXOP1: AC_VO/AC_VI TXOP register
-+ * AC2TXOP: AC_VI in unit of 32us
-+ * AC3TXOP: AC_VO in unit of 32us
-+ */
-+#define WMM_TXOP1_CFG 0x0224
-+#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
-+#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
-+
-+/*
-+ * GPIO_CTRL_CFG:
-+ */
-+#define GPIO_CTRL_CFG 0x0228
-+#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001)
-+#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002)
-+#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004)
-+#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008)
-+#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010)
-+#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020)
-+#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040)
-+#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080)
-+#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100)
-+
-+/*
-+ * MCU_CMD_CFG
-+ */
-+#define MCU_CMD_CFG 0x022c
-+
-+/*
-+ * AC_BK register offsets
-+ */
-+#define TX_BASE_PTR0 0x0230
-+#define TX_MAX_CNT0 0x0234
-+#define TX_CTX_IDX0 0x0238
-+#define TX_DTX_IDX0 0x023c
-+
-+/*
-+ * AC_BE register offsets
-+ */
-+#define TX_BASE_PTR1 0x0240
-+#define TX_MAX_CNT1 0x0244
-+#define TX_CTX_IDX1 0x0248
-+#define TX_DTX_IDX1 0x024c
-+
-+/*
-+ * AC_VI register offsets
-+ */
-+#define TX_BASE_PTR2 0x0250
-+#define TX_MAX_CNT2 0x0254
-+#define TX_CTX_IDX2 0x0258
-+#define TX_DTX_IDX2 0x025c
-+
-+/*
-+ * AC_VO register offsets
-+ */
-+#define TX_BASE_PTR3 0x0260
-+#define TX_MAX_CNT3 0x0264
-+#define TX_CTX_IDX3 0x0268
-+#define TX_DTX_IDX3 0x026c
-+
-+/*
-+ * HCCA register offsets
-+ */
-+#define TX_BASE_PTR4 0x0270
-+#define TX_MAX_CNT4 0x0274
-+#define TX_CTX_IDX4 0x0278
-+#define TX_DTX_IDX4 0x027c
-+
-+/*
-+ * MGMT register offsets
-+ */
-+#define TX_BASE_PTR5 0x0280
-+#define TX_MAX_CNT5 0x0284
-+#define TX_CTX_IDX5 0x0288
-+#define TX_DTX_IDX5 0x028c
-+
-+/*
-+ * Queue register offset macros
-+ */
-+#define TX_QUEUE_REG_OFFSET 0x10
-+#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
-+
-+/*
-+ * RX register offsets
-+ */
-+#define RX_BASE_PTR 0x0290
-+#define RX_MAX_CNT 0x0294
-+#define RX_CRX_IDX 0x0298
-+#define RX_DRX_IDX 0x029c
-+
-+/*
-+ * PBF_SYS_CTRL
-+ * HOST_RAM_WRITE: enable Host program ram write selection
-+ */
-+#define PBF_SYS_CTRL 0x0400
-+#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
-+#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
-+
-+/*
-+ * PBF registers
-+ * Most are for debug. Driver doesn't touch PBF register.
-+ */
-+#define PBF_CFG 0x0408
-+#define PBF_MAX_PCNT 0x040c
-+#define PBF_CTRL 0x0410
-+#define PBF_INT_STA 0x0414
-+#define PBF_INT_ENA 0x0418
-+
-+/*
-+ * BCN_OFFSET0:
-+ */
-+#define BCN_OFFSET0 0x042c
-+#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff)
-+#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00)
-+#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000)
-+#define BCN_OFFSET0_BCN3 FIELD32(0xff000000)
-+
-+/*
-+ * BCN_OFFSET1:
-+ */
-+#define BCN_OFFSET1 0x0430
-+#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff)
-+#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00)
-+#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000)
-+#define BCN_OFFSET1_BCN7 FIELD32(0xff000000)
-+
-+/*
-+ * PBF registers
-+ * Most are for debug. Driver doesn't touch PBF register.
-+ */
-+#define TXRXQ_PCNT 0x0438
-+#define PBF_DBG 0x043c
-+
-+/*
-+ * RF registers
-+ */
-+#define RF_CSR_CFG 0x0500
-+#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
-+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
-+#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
-+#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
-+
-+/*
-+ * MAC Control/Status Registers(CSR).
-+ * Some values are set in TU, whereas 1 TU == 1024 us.
-+ */
-+
-+/*
-+ * MAC_CSR0: ASIC revision number.
-+ * ASIC_REV: 0
-+ * ASIC_VER: 2860
-+ */
-+#define MAC_CSR0 0x1000
-+#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff)
-+#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000)
-+
-+/*
-+ * MAC_SYS_CTRL:
-+ */
-+#define MAC_SYS_CTRL 0x1004
-+#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001)
-+#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002)
-+#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004)
-+#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008)
-+#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010)
-+#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020)
-+#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040)
-+#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080)
-+
-+/*
-+ * MAC_ADDR_DW0: STA MAC register 0
-+ */
-+#define MAC_ADDR_DW0 0x1008
-+#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff)
-+#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00)
-+#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000)
-+#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000)
-+
-+/*
-+ * MAC_ADDR_DW1: STA MAC register 1
-+ * UNICAST_TO_ME_MASK:
-+ * Used to mask off bits from byte 5 of the MAC address
-+ * to determine the UNICAST_TO_ME bit for RX frames.
-+ * The full mask is complemented by BSS_ID_MASK:
-+ * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
-+ */
-+#define MAC_ADDR_DW1 0x100c
-+#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff)
-+#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00)
-+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
-+
-+/*
-+ * MAC_BSSID_DW0: BSSID register 0
-+ */
-+#define MAC_BSSID_DW0 0x1010
-+#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff)
-+#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00)
-+#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000)
-+#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000)
-+
-+/*
-+ * MAC_BSSID_DW1: BSSID register 1
-+ * BSS_ID_MASK:
-+ * 0: 1-BSSID mode (BSS index = 0)
-+ * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
-+ * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
-+ * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
-+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
-+ * BSSID. This will make sure that those bits will be ignored
-+ * when determining the MY_BSS of RX frames.
-+ */
-+#define MAC_BSSID_DW1 0x1014
-+#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff)
-+#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00)
-+#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000)
-+#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000)
-+
-+/*
-+ * MAX_LEN_CFG: Maximum frame length register.
-+ * MAX_MPDU: rt2860b max 16k bytes
-+ * MAX_PSDU: Maximum PSDU length
-+ * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-+ */
-+#define MAX_LEN_CFG 0x1018
-+#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff)
-+#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000)
-+#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000)
-+#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000)
-+
-+/*
-+ * BBP_CSR_CFG: BBP serial control register
-+ * VALUE: Register value to program into BBP
-+ * REG_NUM: Selected BBP register
-+ * READ_CONTROL: 0 write BBP, 1 read BBP
-+ * BUSY: ASIC is busy executing BBP commands
-+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
-+ * BBP_RW_MODE: 0 serial, 1 paralell
-+ */
-+#define BBP_CSR_CFG 0x101c
-+#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
-+#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00)
-+#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000)
-+#define BBP_CSR_CFG_BUSY FIELD32(0x00020000)
-+#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000)
-+#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000)
-+
-+/*
-+ * RF_CSR_CFG0: RF control register
-+ * REGID_AND_VALUE: Register value to program into RF
-+ * BITWIDTH: Selected RF register
-+ * STANDBYMODE: 0 high when standby, 1 low when standby
-+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
-+ * BUSY: ASIC is busy executing RF commands
-+ */
-+#define RF_CSR_CFG0 0x1020
-+#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff)
-+#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000)
-+#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff)
-+#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000)
-+#define RF_CSR_CFG0_SEL FIELD32(0x40000000)
-+#define RF_CSR_CFG0_BUSY FIELD32(0x80000000)
-+
-+/*
-+ * RF_CSR_CFG1: RF control register
-+ * REGID_AND_VALUE: Register value to program into RF
-+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
-+ * 0: 3 system clock cycle (37.5usec)
-+ * 1: 5 system clock cycle (62.5usec)
-+ */
-+#define RF_CSR_CFG1 0x1024
-+#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff)
-+#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000)
-+
-+/*
-+ * RF_CSR_CFG2: RF control register
-+ * VALUE: Register value to program into RF
-+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
-+ * 0: 3 system clock cycle (37.5usec)
-+ * 1: 5 system clock cycle (62.5usec)
-+ */
-+#define RF_CSR_CFG2 0x1028
-+#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff)
-+
-+/*
-+ * LED_CFG: LED control
-+ * color LED's:
-+ * 0: off
-+ * 1: blinking upon TX2
-+ * 2: periodic slow blinking
-+ * 3: always on
-+ * LED polarity:
-+ * 0: active low
-+ * 1: active high
-+ */
-+#define LED_CFG 0x102c
-+#define LED_CFG_ON_PERIOD FIELD32(0x000000ff)
-+#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00)
-+#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000)
-+#define LED_CFG_R_LED_MODE FIELD32(0x03000000)
-+#define LED_CFG_G_LED_MODE FIELD32(0x0c000000)
-+#define LED_CFG_Y_LED_MODE FIELD32(0x30000000)
-+#define LED_CFG_LED_POLAR FIELD32(0x40000000)
-+
-+/*
-+ * XIFS_TIME_CFG: MAC timing
-+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
-+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
-+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
-+ * when MAC doesn't reference BBP signal BBRXEND
-+ * EIFS: unit 1us
-+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
-+ *
-+ */
-+#define XIFS_TIME_CFG 0x1100
-+#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff)
-+#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00)
-+#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000)
-+#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000)
-+#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000)
-+
-+/*
-+ * BKOFF_SLOT_CFG:
-+ */
-+#define BKOFF_SLOT_CFG 0x1104
-+#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff)
-+#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00)
-+
-+/*
-+ * NAV_TIME_CFG:
-+ */
-+#define NAV_TIME_CFG 0x1108
-+#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff)
-+#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00)
-+#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000)
-+#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000)
-+
-+/*
-+ * CH_TIME_CFG: count as channel busy
-+ */
-+#define CH_TIME_CFG 0x110c
-+
-+/*
-+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
-+ */
-+#define PBF_LIFE_TIMER 0x1110
-+
-+/*
-+ * BCN_TIME_CFG:
-+ * BEACON_INTERVAL: in unit of 1/16 TU
-+ * TSF_TICKING: Enable TSF auto counting
-+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-+ * BEACON_GEN: Enable beacon generator
-+ */
-+#define BCN_TIME_CFG 0x1114
-+#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff)
-+#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000)
-+#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000)
-+#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000)
-+#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000)
-+#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)
-+
-+/*
-+ * TBTT_SYNC_CFG:
-+ */
-+#define TBTT_SYNC_CFG 0x1118
-+
-+/*
-+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
-+ */
-+#define TSF_TIMER_DW0 0x111c
-+#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff)
-+
-+/*
-+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
-+ */
-+#define TSF_TIMER_DW1 0x1120
-+#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff)
-+
-+/*
-+ * TBTT_TIMER: TImer remains till next TBTT, read-only
-+ */
-+#define TBTT_TIMER 0x1124
-+
-+/*
-+ * INT_TIMER_CFG:
-+ */
-+#define INT_TIMER_CFG 0x1128
-+
-+/*
-+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
-+ */
-+#define INT_TIMER_EN 0x112c
-+
-+/*
-+ * CH_IDLE_STA: channel idle time
-+ */
-+#define CH_IDLE_STA 0x1130
-+
-+/*
-+ * CH_BUSY_STA: channel busy time
-+ */
-+#define CH_BUSY_STA 0x1134
-+
-+/*
-+ * MAC_STATUS_CFG:
-+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
-+ * if 1 or higher one of the 2 registers is busy.
-+ */
-+#define MAC_STATUS_CFG 0x1200
-+#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
-+
-+/*
-+ * PWR_PIN_CFG:
-+ */
-+#define PWR_PIN_CFG 0x1204
-+
-+/*
-+ * AUTOWAKEUP_CFG: Manual power control / status register
-+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
-+ * AUTOWAKE: 0:sleep, 1:awake
-+ */
-+#define AUTOWAKEUP_CFG 0x1208
-+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff)
-+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
-+#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
-+
-+/*
-+ * EDCA_AC0_CFG:
-+ */
-+#define EDCA_AC0_CFG 0x1300
-+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC1_CFG:
-+ */
-+#define EDCA_AC1_CFG 0x1304
-+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC2_CFG:
-+ */
-+#define EDCA_AC2_CFG 0x1308
-+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC3_CFG:
-+ */
-+#define EDCA_AC3_CFG 0x130c
-+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_TID_AC_MAP:
-+ */
-+#define EDCA_TID_AC_MAP 0x1310
-+
-+/*
-+ * TX_PWR_CFG_0:
-+ */
-+#define TX_PWR_CFG_0 0x1314
-+#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f)
-+#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0)
-+#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00)
-+#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000)
-+#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000)
-+#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
-+#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
-+#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_1:
-+ */
-+#define TX_PWR_CFG_1 0x1318
-+#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f)
-+#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0)
-+#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00)
-+#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000)
-+#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_2:
-+ */
-+#define TX_PWR_CFG_2 0x131c
-+#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_3:
-+ */
-+#define TX_PWR_CFG_3 0x1320
-+#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_4:
-+ */
-+#define TX_PWR_CFG_4 0x1324
-+#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
-+
-+/*
-+ * TX_PIN_CFG:
-+ */
-+#define TX_PIN_CFG 0x1328
-+#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
-+#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
-+#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
-+#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008)
-+#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010)
-+#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020)
-+#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040)
-+#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080)
-+#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100)
-+#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200)
-+#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400)
-+#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800)
-+#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000)
-+#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000)
-+#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000)
-+#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000)
-+#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000)
-+#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
-+#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
-+#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
-+
-+/*
-+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
-+ */
-+#define TX_BAND_CFG 0x132c
-+#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001)
-+#define TX_BAND_CFG_A FIELD32(0x00000002)
-+#define TX_BAND_CFG_BG FIELD32(0x00000004)
-+
-+/*
-+ * TX_SW_CFG0:
-+ */
-+#define TX_SW_CFG0 0x1330
-+
-+/*
-+ * TX_SW_CFG1:
-+ */
-+#define TX_SW_CFG1 0x1334
-+
-+/*
-+ * TX_SW_CFG2:
-+ */
-+#define TX_SW_CFG2 0x1338
-+
-+/*
-+ * TXOP_THRES_CFG:
-+ */
-+#define TXOP_THRES_CFG 0x133c
-+
-+/*
-+ * TXOP_CTRL_CFG:
-+ */
-+#define TXOP_CTRL_CFG 0x1340
-+
-+/*
-+ * TX_RTS_CFG:
-+ * RTS_THRES: unit:byte
-+ * RTS_FBK_EN: enable rts rate fallback
-+ */
-+#define TX_RTS_CFG 0x1344
-+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
-+#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00)
-+#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000)
-+
-+/*
-+ * TX_TIMEOUT_CFG:
-+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
-+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
-+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
-+ * it is recommended that:
-+ * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-+ */
-+#define TX_TIMEOUT_CFG 0x1348
-+#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0)
-+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00)
-+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000)
-+
-+/*
-+ * TX_RTY_CFG:
-+ * SHORT_RTY_LIMIT: short retry limit
-+ * LONG_RTY_LIMIT: long retry limit
-+ * LONG_RTY_THRE: Long retry threshoold
-+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
-+ * 0:expired by retry limit, 1: expired by mpdu life timer
-+ * AGG_RTY_MODE: Aggregate MPDU retry mode
-+ * 0:expired by retry limit, 1: expired by mpdu life timer
-+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
-+ */
-+#define TX_RTY_CFG 0x134c
-+#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff)
-+#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00)
-+#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000)
-+#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000)
-+#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000)
-+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000)
-+
-+/*
-+ * TX_LINK_CFG:
-+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
-+ * MFB_ENABLE: TX apply remote MFB 1:enable
-+ * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable
-+ * 0: not apply remote remote unsolicit (MFS=7)
-+ * TX_MRQ_EN: MCS request TX enable
-+ * TX_RDG_EN: RDG TX enable
-+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
-+ * REMOTE_MFB: remote MCS feedback
-+ * REMOTE_MFS: remote MCS feedback sequence number
-+ */
-+#define TX_LINK_CFG 0x1350
-+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
-+#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100)
-+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200)
-+#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400)
-+#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800)
-+#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000)
-+#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000)
-+#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000)
-+
-+/*
-+ * HT_FBK_CFG0:
-+ */
-+#define HT_FBK_CFG0 0x1354
-+#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f)
-+#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0)
-+#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00)
-+#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000)
-+#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000)
-+#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000)
-+#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000)
-+#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000)
-+
-+/*
-+ * HT_FBK_CFG1:
-+ */
-+#define HT_FBK_CFG1 0x1358
-+#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f)
-+#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0)
-+#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00)
-+#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000)
-+#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000)
-+#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000)
-+#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000)
-+#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000)
-+
-+/*
-+ * LG_FBK_CFG0:
-+ */
-+#define LG_FBK_CFG0 0x135c
-+#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f)
-+#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0)
-+#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00)
-+#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000)
-+#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000)
-+#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000)
-+#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000)
-+#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000)
-+
-+/*
-+ * LG_FBK_CFG1:
-+ */
-+#define LG_FBK_CFG1 0x1360
-+#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f)
-+#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0)
-+#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00)
-+#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000)
-+
-+/*
-+ * CCK_PROT_CFG: CCK Protection
-+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
-+ * PROTECT_CTRL: Protection control frame type for CCK TX
-+ * 0:none, 1:RTS/CTS, 2:CTS-to-self
-+ * PROTECT_NAV: TXOP protection type for CCK TX
-+ * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect
-+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
-+ * RTS_TH_EN: RTS threshold enable on CCK TX
-+ */
-+#define CCK_PROT_CFG 0x1364
-+#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * OFDM_PROT_CFG: OFDM Protection
-+ */
-+#define OFDM_PROT_CFG 0x1368
-+#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * MM20_PROT_CFG: MM20 Protection
-+ */
-+#define MM20_PROT_CFG 0x136c
-+#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * MM40_PROT_CFG: MM40 Protection
-+ */
-+#define MM40_PROT_CFG 0x1370
-+#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * GF20_PROT_CFG: GF20 Protection
-+ */
-+#define GF20_PROT_CFG 0x1374
-+#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * GF40_PROT_CFG: GF40 Protection
-+ */
-+#define GF40_PROT_CFG 0x1378
-+#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * EXP_CTS_TIME:
-+ */
-+#define EXP_CTS_TIME 0x137c
-+
-+/*
-+ * EXP_ACK_TIME:
-+ */
-+#define EXP_ACK_TIME 0x1380
-+
-+/*
-+ * RX_FILTER_CFG: RX configuration register.
-+ */
-+#define RX_FILTER_CFG 0x1400
-+#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001)
-+#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002)
-+#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004)
-+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008)
-+#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010)
-+#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020)
-+#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040)
-+#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080)
-+#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100)
-+#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200)
-+#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400)
-+#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800)
-+#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000)
-+#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000)
-+#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000)
-+#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000)
-+#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000)
-+
-+/*
-+ * AUTO_RSP_CFG:
-+ * AUTORESPONDER: 0: disable, 1: enable
-+ * BAC_ACK_POLICY: 0:long, 1:short preamble
-+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
-+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
-+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
-+ * DUAL_CTS_EN: Power bit value in control frame
-+ * ACK_CTS_PSM_BIT:Power bit value in control frame
-+ */
-+#define AUTO_RSP_CFG 0x1404
-+#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001)
-+#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002)
-+#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004)
-+#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008)
-+#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010)
-+#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040)
-+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080)
-+
-+/*
-+ * LEGACY_BASIC_RATE:
-+ */
-+#define LEGACY_BASIC_RATE 0x1408
-+
-+/*
-+ * HT_BASIC_RATE:
-+ */
-+#define HT_BASIC_RATE 0x140c
-+
-+/*
-+ * HT_CTRL_CFG:
-+ */
-+#define HT_CTRL_CFG 0x1410
-+
-+/*
-+ * SIFS_COST_CFG:
-+ */
-+#define SIFS_COST_CFG 0x1414
-+
-+/*
-+ * RX_PARSER_CFG:
-+ * Set NAV for all received frames
-+ */
-+#define RX_PARSER_CFG 0x1418
-+
-+/*
-+ * TX_SEC_CNT0:
-+ */
-+#define TX_SEC_CNT0 0x1500
-+
-+/*
-+ * RX_SEC_CNT0:
-+ */
-+#define RX_SEC_CNT0 0x1504
-+
-+/*
-+ * CCMP_FC_MUTE:
-+ */
-+#define CCMP_FC_MUTE 0x1508
-+
-+/*
-+ * TXOP_HLDR_ADDR0:
-+ */
-+#define TXOP_HLDR_ADDR0 0x1600
-+
-+/*
-+ * TXOP_HLDR_ADDR1:
-+ */
-+#define TXOP_HLDR_ADDR1 0x1604
-+
-+/*
-+ * TXOP_HLDR_ET:
-+ */
-+#define TXOP_HLDR_ET 0x1608
-+
-+/*
-+ * QOS_CFPOLL_RA_DW0:
-+ */
-+#define QOS_CFPOLL_RA_DW0 0x160c
-+
-+/*
-+ * QOS_CFPOLL_RA_DW1:
-+ */
-+#define QOS_CFPOLL_RA_DW1 0x1610
-+
-+/*
-+ * QOS_CFPOLL_QC:
-+ */
-+#define QOS_CFPOLL_QC 0x1614
-+
-+/*
-+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
-+ */
-+#define RX_STA_CNT0 0x1700
-+#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff)
-+#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000)
-+
-+/*
-+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
-+ */
-+#define RX_STA_CNT1 0x1704
-+#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff)
-+#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000)
-+
-+/*
-+ * RX_STA_CNT2:
-+ */
-+#define RX_STA_CNT2 0x1708
-+#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff)
-+#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT0: TX Beacon count
-+ */
-+#define TX_STA_CNT0 0x170c
-+#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff)
-+#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT1: TX tx count
-+ */
-+#define TX_STA_CNT1 0x1710
-+#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff)
-+#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT2: TX tx count
-+ */
-+#define TX_STA_CNT2 0x1714
-+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff)
-+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_FIFO: TX Result for specific PID status fifo register
-+ */
-+#define TX_STA_FIFO 0x1718
-+#define TX_STA_FIFO_VALID FIELD32(0x00000001)
-+#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e)
-+#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020)
-+#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040)
-+#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080)
-+#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
-+#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT: Debug counter
-+ */
-+#define TX_AGG_CNT 0x171c
-+#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT0:
-+ */
-+#define TX_AGG_CNT0 0x1720
-+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT1:
-+ */
-+#define TX_AGG_CNT1 0x1724
-+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT2:
-+ */
-+#define TX_AGG_CNT2 0x1728
-+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT3:
-+ */
-+#define TX_AGG_CNT3 0x172c
-+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT4:
-+ */
-+#define TX_AGG_CNT4 0x1730
-+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT5:
-+ */
-+#define TX_AGG_CNT5 0x1734
-+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT6:
-+ */
-+#define TX_AGG_CNT6 0x1738
-+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT7:
-+ */
-+#define TX_AGG_CNT7 0x173c
-+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * MPDU_DENSITY_CNT:
-+ * TX_ZERO_DEL: TX zero length delimiter count
-+ * RX_ZERO_DEL: RX zero length delimiter count
-+ */
-+#define MPDU_DENSITY_CNT 0x1740
-+#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff)
-+#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000)
-+
-+/*
-+ * Security key table memory.
-+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
-+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
-+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
-+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
-+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
-+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
-+ */
-+#define MAC_WCID_BASE 0x1800
-+#define PAIRWISE_KEY_TABLE_BASE 0x4000
-+#define MAC_IVEIV_TABLE_BASE 0x6000
-+#define MAC_WCID_ATTRIBUTE_BASE 0x6800
-+#define SHARED_KEY_TABLE_BASE 0x6c00
-+#define SHARED_KEY_MODE_BASE 0x7000
-+
-+#define MAC_WCID_ENTRY(__idx) \
-+ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
-+#define PAIRWISE_KEY_ENTRY(__idx) \
-+ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-+#define MAC_IVEIV_ENTRY(__idx) \
-+ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
-+#define MAC_WCID_ATTR_ENTRY(__idx) \
-+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
-+#define SHARED_KEY_ENTRY(__idx) \
-+ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-+#define SHARED_KEY_MODE_ENTRY(__idx) \
-+ ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
-+
-+struct mac_wcid_entry {
-+ u8 mac[6];
-+ u8 reserved[2];
-+} __attribute__ ((packed));
-+
-+struct hw_key_entry {
-+ u8 key[16];
-+ u8 tx_mic[8];
-+ u8 rx_mic[8];
-+} __attribute__ ((packed));
-+
-+struct mac_iveiv_entry {
-+ u8 iv[8];
-+} __attribute__ ((packed));
-+
-+/*
-+ * MAC_WCID_ATTRIBUTE:
-+ */
-+#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001)
-+#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
-+#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
-+#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
-+
-+/*
-+ * SHARED_KEY_MODE:
-+ */
-+#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007)
-+#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070)
-+#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700)
-+#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000)
-+#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000)
-+#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000)
-+#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000)
-+#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000)
-+
-+/*
-+ * HOST-MCU communication
-+ */
-+
-+/*
-+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
-+ */
-+#define H2M_MAILBOX_CSR 0x7010
-+#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
-+#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
-+#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
-+#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
-+
-+/*
-+ * H2M_MAILBOX_CID:
-+ */
-+#define H2M_MAILBOX_CID 0x7014
-+#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
-+#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00)
-+#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000)
-+#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000)
-+
-+/*
-+ * H2M_MAILBOX_STATUS:
-+ */
-+#define H2M_MAILBOX_STATUS 0x701c
-+
-+/*
-+ * H2M_INT_SRC:
-+ */
-+#define H2M_INT_SRC 0x7024
-+
-+/*
-+ * H2M_BBP_AGENT:
-+ */
-+#define H2M_BBP_AGENT 0x7028
-+
-+/*
-+ * MCU_LEDCS: LED control for MCU Mailbox.
-+ */
-+#define MCU_LEDCS_LED_MODE FIELD8(0x1f)
-+#define MCU_LEDCS_POLARITY FIELD8(0x01)
-+
-+/*
-+ * HW_CS_CTS_BASE:
-+ * Carrier-sense CTS frame base address.
-+ * It's where mac stores carrier-sense frame for carrier-sense function.
-+ */
-+#define HW_CS_CTS_BASE 0x7700
-+
-+/*
-+ * HW_DFS_CTS_BASE:
-+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
-+ */
-+#define HW_DFS_CTS_BASE 0x7780
-+
-+/*
-+ * TXRX control registers - base address 0x3000
-+ */
-+
-+/*
-+ * TXRX_CSR1:
-+ * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
-+ */
-+#define TXRX_CSR1 0x77d0
-+
-+/*
-+ * HW_DEBUG_SETTING_BASE:
-+ * since NULL frame won't be that long (256 byte)
-+ * We steal 16 tail bytes to save debugging settings
-+ */
-+#define HW_DEBUG_SETTING_BASE 0x77f0
-+#define HW_DEBUG_SETTING_BASE2 0x7770
-+
-+/*
-+ * HW_BEACON_BASE
-+ * In order to support maximum 8 MBSS and its maximum length
-+ * is 512 bytes for each beacon
-+ * Three section discontinue memory segments will be used.
-+ * 1. The original region for BCN 0~3
-+ * 2. Extract memory from FCE table for BCN 4~5
-+ * 3. Extract memory from Pair-wise key table for BCN 6~7
-+ * It occupied those memory of wcid 238~253 for BCN 6
-+ * and wcid 222~237 for BCN 7
-+ *
-+ * IMPORTANT NOTE: Not sure why legacy driver does this,
-+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
-+ */
-+#define HW_BEACON_BASE0 0x7800
-+#define HW_BEACON_BASE1 0x7a00
-+#define HW_BEACON_BASE2 0x7c00
-+#define HW_BEACON_BASE3 0x7e00
-+#define HW_BEACON_BASE4 0x7200
-+#define HW_BEACON_BASE5 0x7400
-+#define HW_BEACON_BASE6 0x5dc0
-+#define HW_BEACON_BASE7 0x5bc0
-+
-+#define HW_BEACON_OFFSET(__index) \
-+ ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-+ (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-+ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
-+
-+/*
-+ * 8051 firmware image.
-+ */
-+#define FIRMWARE_RT2860 "rt2860.bin"
-+#define FIRMWARE_IMAGE_BASE 0x2000
-+
-+/*
-+ * BBP registers.
-+ * The wordsize of the BBP is 8 bits.
-+ */
-+
-+/*
-+ * BBP 1: TX Antenna
-+ */
-+#define BBP1_TX_POWER FIELD8(0x07)
-+#define BBP1_TX_ANTENNA FIELD8(0x18)
-+
-+/*
-+ * BBP 3: RX Antenna
-+ */
-+#define BBP3_RX_ANTENNA FIELD8(0x18)
-+#define BBP3_HT40_PLUS FIELD8(0x20)
-+
-+/*
-+ * BBP 4: Bandwidth
-+ */
-+#define BBP4_TX_BF FIELD8(0x01)
-+#define BBP4_BANDWIDTH FIELD8(0x18)
-+
-+/*
-+ * RFCSR registers
-+ * The wordsize of the RFCSR is 8 bits.
-+ */
-+
-+/*
-+ * RFCSR 6:
-+ */
-+#define RFCSR6_R FIELD8(0x03)
-+
-+/*
-+ * RFCSR 7:
-+ */
-+#define RFCSR7_RF_TUNING FIELD8(0x01)
-+
-+/*
-+ * RFCSR 12:
-+ */
-+#define RFCSR12_TX_POWER FIELD8(0x1f)
-+
-+/*
-+ * RFCSR 22:
-+ */
-+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
-+
-+/*
-+ * RFCSR 23:
-+ */
-+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
-+
-+/*
-+ * RFCSR 30:
-+ */
-+#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
-+
-+/*
-+ * RF registers
-+ */
-+
-+/*
-+ * RF 2
-+ */
-+#define RF2_ANTENNA_RX2 FIELD32(0x00000040)
-+#define RF2_ANTENNA_TX1 FIELD32(0x00004000)
-+#define RF2_ANTENNA_RX1 FIELD32(0x00020000)
-+
-+/*
-+ * RF 3
-+ */
-+#define RF3_TXPOWER_G FIELD32(0x00003e00)
-+#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200)
-+#define RF3_TXPOWER_A FIELD32(0x00003c00)
-+
-+/*
-+ * RF 4
-+ */
-+#define RF4_TXPOWER_G FIELD32(0x000007c0)
-+#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040)
-+#define RF4_TXPOWER_A FIELD32(0x00000780)
-+#define RF4_FREQ_OFFSET FIELD32(0x001f8000)
-+#define RF4_HT40 FIELD32(0x00200000)
-+
-+/*
-+ * EEPROM content.
-+ * The wordsize of the EEPROM is 16 bits.
-+ */
-+
-+/*
-+ * EEPROM Version
-+ */
-+#define EEPROM_VERSION 0x0001
-+#define EEPROM_VERSION_FAE FIELD16(0x00ff)
-+#define EEPROM_VERSION_VERSION FIELD16(0xff00)
-+
-+/*
-+ * HW MAC address.
-+ */
-+#define EEPROM_MAC_ADDR_0 0x0002
-+#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
-+#define EEPROM_MAC_ADDR_1 0x0003
-+#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
-+#define EEPROM_MAC_ADDR_2 0x0004
-+#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM ANTENNA config
-+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
-+ * TXPATH: 1: 1T, 2: 2T
-+ */
-+#define EEPROM_ANTENNA 0x001a
-+#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f)
-+#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0)
-+#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00)
-+
-+/*
-+ * EEPROM NIC config
-+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
-+ */
-+#define EEPROM_NIC 0x001b
-+#define EEPROM_NIC_HW_RADIO FIELD16(0x0001)
-+#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002)
-+#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004)
-+#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008)
-+#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010)
-+#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020)
-+#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040)
-+#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
-+#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
-+#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
-+
-+/*
-+ * EEPROM frequency
-+ */
-+#define EEPROM_FREQ 0x001d
-+#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
-+#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
-+#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
-+
-+/*
-+ * EEPROM LED
-+ * POLARITY_RDY_G: Polarity RDY_G setting.
-+ * POLARITY_RDY_A: Polarity RDY_A setting.
-+ * POLARITY_ACT: Polarity ACT setting.
-+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
-+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
-+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
-+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
-+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
-+ * LED_MODE: Led mode.
-+ */
-+#define EEPROM_LED1 0x001e
-+#define EEPROM_LED2 0x001f
-+#define EEPROM_LED3 0x0020
-+#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
-+#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
-+#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
-+#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
-+#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
-+#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
-+#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
-+#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
-+#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
-+
-+/*
-+ * EEPROM LNA
-+ */
-+#define EEPROM_LNA 0x0022
-+#define EEPROM_LNA_BG FIELD16(0x00ff)
-+#define EEPROM_LNA_A0 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI BG offset
-+ */
-+#define EEPROM_RSSI_BG 0x0023
-+#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
-+#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI BG2 offset
-+ */
-+#define EEPROM_RSSI_BG2 0x0024
-+#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
-+#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI A offset
-+ */
-+#define EEPROM_RSSI_A 0x0025
-+#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
-+#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI A2 offset
-+ */
-+#define EEPROM_RSSI_A2 0x0026
-+#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
-+#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
-+ * This is delta in 40MHZ.
-+ * VALUE: Tx Power dalta value (MAX=4)
-+ * TYPE: 1: Plus the delta value, 0: minus the delta value
-+ * TXPOWER: Enable:
-+ */
-+#define EEPROM_TXPOWER_DELTA 0x0028
-+#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f)
-+#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040)
-+#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080)
-+
-+/*
-+ * EEPROM TXPOWER 802.11BG
-+ */
-+#define EEPROM_TXPOWER_BG1 0x0029
-+#define EEPROM_TXPOWER_BG2 0x0030
-+#define EEPROM_TXPOWER_BG_SIZE 7
-+#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
-+#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXPOWER 802.11A
-+ */
-+#define EEPROM_TXPOWER_A1 0x003c
-+#define EEPROM_TXPOWER_A2 0x0053
-+#define EEPROM_TXPOWER_A_SIZE 6
-+#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
-+#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXpower byrate: 20MHZ power
-+ */
-+#define EEPROM_TXPOWER_BYRATE 0x006f
-+
-+/*
-+ * EEPROM BBP.
-+ */
-+#define EEPROM_BBP_START 0x0078
-+#define EEPROM_BBP_SIZE 16
-+#define EEPROM_BBP_VALUE FIELD16(0x00ff)
-+#define EEPROM_BBP_REG_ID FIELD16(0xff00)
-+
-+/*
-+ * MCU mailbox commands.
-+ */
-+#define MCU_SLEEP 0x30
-+#define MCU_WAKEUP 0x31
-+#define MCU_RADIO_OFF 0x35
-+#define MCU_LED 0x50
-+#define MCU_LED_STRENGTH 0x51
-+#define MCU_LED_1 0x52
-+#define MCU_LED_2 0x53
-+#define MCU_LED_3 0x54
-+#define MCU_RADAR 0x60
-+#define MCU_BOOT_SIGNAL 0x72
-+#define MCU_BBP_SIGNAL 0x80
-+
-+/*
-+ * MCU mailbox tokens
-+ */
-+#define TOKEN_WAKUP 3
-+
-+/*
-+ * DMA descriptor defines.
-+ */
-+#define TXD_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define RXD_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) )
-+
-+/*
-+ * TX descriptor format for TX, PRIO and Beacon Ring.
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define TXD_W0_SD_PTR0 FIELD32(0xffffffff)
-+
-+/*
-+ * Word1
-+ */
-+#define TXD_W1_SD_LEN1 FIELD32(0x00003fff)
-+#define TXD_W1_LAST_SEC1 FIELD32(0x00004000)
-+#define TXD_W1_BURST FIELD32(0x00008000)
-+#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000)
-+#define TXD_W1_LAST_SEC0 FIELD32(0x40000000)
-+#define TXD_W1_DMA_DONE FIELD32(0x80000000)
-+
-+/*
-+ * Word2
-+ */
-+#define TXD_W2_SD_PTR1 FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
-+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
-+ * 0:MGMT, 1:HCCA 2:EDCA
-+ */
-+#define TXD_W3_WIV FIELD32(0x01000000)
-+#define TXD_W3_QSEL FIELD32(0x06000000)
-+#define TXD_W3_TCO FIELD32(0x20000000)
-+#define TXD_W3_UCO FIELD32(0x40000000)
-+#define TXD_W3_ICO FIELD32(0x80000000)
-+
-+/*
-+ * TX WI structure
-+ */
-+
-+/*
-+ * Word0
-+ * FRAG: 1 To inform TKIP engine this is a fragment.
-+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
-+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
-+ * BW: Channel bandwidth 20MHz or 40 MHz
-+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
-+ */
-+#define TXWI_W0_FRAG FIELD32(0x00000001)
-+#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
-+#define TXWI_W0_CF_ACK FIELD32(0x00000004)
-+#define TXWI_W0_TS FIELD32(0x00000008)
-+#define TXWI_W0_AMPDU FIELD32(0x00000010)
-+#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0)
-+#define TXWI_W0_TX_OP FIELD32(0x00000300)
-+#define TXWI_W0_MCS FIELD32(0x007f0000)
-+#define TXWI_W0_BW FIELD32(0x00800000)
-+#define TXWI_W0_SHORT_GI FIELD32(0x01000000)
-+#define TXWI_W0_STBC FIELD32(0x06000000)
-+#define TXWI_W0_IFS FIELD32(0x08000000)
-+#define TXWI_W0_PHYMODE FIELD32(0xc0000000)
-+
-+/*
-+ * Word1
-+ */
-+#define TXWI_W1_ACK FIELD32(0x00000001)
-+#define TXWI_W1_NSEQ FIELD32(0x00000002)
-+#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc)
-+#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00)
-+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
-+#define TXWI_W1_PACKETID FIELD32(0xf0000000)
-+
-+/*
-+ * Word2
-+ */
-+#define TXWI_W2_IV FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ */
-+#define TXWI_W3_EIV FIELD32(0xffffffff)
-+
-+/*
-+ * RX descriptor format for RX Ring.
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define RXD_W0_SDP0 FIELD32(0xffffffff)
-+
-+/*
-+ * Word1
-+ */
-+#define RXD_W1_SDL1 FIELD32(0x00003fff)
-+#define RXD_W1_SDL0 FIELD32(0x3fff0000)
-+#define RXD_W1_LS0 FIELD32(0x40000000)
-+#define RXD_W1_DMA_DONE FIELD32(0x80000000)
-+
-+/*
-+ * Word2
-+ */
-+#define RXD_W2_SDP1 FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ * AMSDU: RX with 802.3 header, not 802.11 header.
-+ * DECRYPTED: This frame is being decrypted.
-+ */
-+#define RXD_W3_BA FIELD32(0x00000001)
-+#define RXD_W3_DATA FIELD32(0x00000002)
-+#define RXD_W3_NULLDATA FIELD32(0x00000004)
-+#define RXD_W3_FRAG FIELD32(0x00000008)
-+#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010)
-+#define RXD_W3_MULTICAST FIELD32(0x00000020)
-+#define RXD_W3_BROADCAST FIELD32(0x00000040)
-+#define RXD_W3_MY_BSS FIELD32(0x00000080)
-+#define RXD_W3_CRC_ERROR FIELD32(0x00000100)
-+#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600)
-+#define RXD_W3_AMSDU FIELD32(0x00000800)
-+#define RXD_W3_HTC FIELD32(0x00001000)
-+#define RXD_W3_RSSI FIELD32(0x00002000)
-+#define RXD_W3_L2PAD FIELD32(0x00004000)
-+#define RXD_W3_AMPDU FIELD32(0x00008000)
-+#define RXD_W3_DECRYPTED FIELD32(0x00010000)
-+#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000)
-+#define RXD_W3_PLCP_RSSI FIELD32(0x00040000)
-+
-+/*
-+ * RX WI structure
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
-+#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
-+#define RXWI_W0_BSSID FIELD32(0x00001c00)
-+#define RXWI_W0_UDF FIELD32(0x0000e000)
-+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
-+#define RXWI_W0_TID FIELD32(0xf0000000)
-+
-+/*
-+ * Word1
-+ */
-+#define RXWI_W1_FRAG FIELD32(0x0000000f)
-+#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
-+#define RXWI_W1_MCS FIELD32(0x007f0000)
-+#define RXWI_W1_BW FIELD32(0x00800000)
-+#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
-+#define RXWI_W1_STBC FIELD32(0x06000000)
-+#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
-+
-+/*
-+ * Word2
-+ */
-+#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
-+#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
-+#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
-+
-+/*
-+ * Word3
-+ */
-+#define RXWI_W3_SNR0 FIELD32(0x000000ff)
-+#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
-+
-+/*
-+ * Macro's for converting txpower from EEPROM to mac80211 value
-+ * and from mac80211 value to register value.
-+ */
-+#define MIN_G_TXPOWER 0
-+#define MIN_A_TXPOWER -7
-+#define MAX_G_TXPOWER 31
-+#define MAX_A_TXPOWER 15
-+#define DEFAULT_TXPOWER 5
-+
-+#define TXPOWER_G_FROM_DEV(__txpower) \
-+ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-+
-+#define TXPOWER_G_TO_DEV(__txpower) \
-+ clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-+
-+#define TXPOWER_A_FROM_DEV(__txpower) \
-+ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-+
-+#define TXPOWER_A_TO_DEV(__txpower) \
-+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
-+
-+#endif /* RT2800PCI_H */
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -138,6 +138,12 @@ struct rt2x00_chip {
- #define RT2561 0x0302
- #define RT2661 0x0401
- #define RT2571 0x1300
-+#define RT2860 0x0601 /* 2.4GHz PCI/CB */
-+#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */
-+#define RT2890 0x0701 /* 2.4GHz PCIe */
-+#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */
-+#define RT2880 0x2880 /* WSOC */
-+#define RT3052 0x3052 /* WSOC */
-
- u16 rf;
- u32 rev;
+++ /dev/null
-From 3924d0442771e17c26ab10ad53a1807e800ab3f1 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sat, 28 Mar 2009 20:48:56 +0100
-Subject: [PATCH 9/9] rt2x00: Implement support for rt2800usb
-
-Add support for the rt2800usb chipset.
-
-Includes various patches from Mattias, Felix, Xose and Axel.
-
-Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
-Signed-off-by: Axel Kollhofer <rain_maker@root-forum.org>
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/Kconfig | 14 +
- drivers/net/wireless/rt2x00/Makefile | 1 +
- drivers/net/wireless/rt2x00/rt2800usb.c | 3036 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h | 1 +
- 5 files changed, 4986 insertions(+), 0 deletions(-)
- create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c
- create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h
-
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_RT61PCI) += rt61pci.o
- obj-$(CONFIG_RT2800PCI) += rt2800pci.o
- obj-$(CONFIG_RT2500USB) += rt2500usb.o
- obj-$(CONFIG_RT73USB) += rt73usb.o
-+obj-$(CONFIG_RT2800USB) += rt2800usb.o
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -0,0 +1,3036 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2800usb
-+ Abstract: rt2800usb device specific routines.
-+ Supported chipsets: RT2800U.
-+ */
-+
-+#include <linux/crc-ccitt.h>
-+#include <linux/delay.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/usb.h>
-+
-+#include "rt2x00.h"
-+#include "rt2x00usb.h"
-+#include "rt2800usb.h"
-+
-+/*
-+ * Allow hardware encryption to be disabled.
-+ */
-+static int modparam_nohwcrypt = 0;
-+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-+
-+/*
-+ * Register access.
-+ * All access to the CSR registers will go through the methods
-+ * rt2x00usb_register_read and rt2x00usb_register_write.
-+ * BBP and RF register require indirect register access,
-+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
-+ * These indirect registers work with busy bits,
-+ * and we will try maximal REGISTER_BUSY_COUNT times to access
-+ * the register while taking a REGISTER_BUSY_DELAY us delay
-+ * between each attampt. When the busy bit is still set at that time,
-+ * the access attempt is considered to have failed,
-+ * and we will print an error.
-+ * The _lock versions must be used if you already hold the csr_mutex
-+ */
-+#define WAIT_FOR_BBP(__dev, __reg) \
-+ rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RFCSR(__dev, __reg) \
-+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-+#define WAIT_FOR_RF(__dev, __reg) \
-+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-+#define WAIT_FOR_MCU(__dev, __reg) \
-+ rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-+ H2M_MAILBOX_CSR_OWNER, (__reg))
-+
-+static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u8 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0);
-+
-+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, u8 *value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes available, afterwards we
-+ * can safely write the read request into the register.
-+ * After the data has been written, we wait until hardware
-+ * returns the correct value, if at any time the register
-+ * doesn't become available in time, reg will be 0xffffffff
-+ * which means we return 0xff to the caller.
-+ */
-+ if (WAIT_FOR_BBP(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1);
-+
-+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-+
-+ WAIT_FOR_BBP(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u8 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RFCSR becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, u8 *value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RFCSR becomes available, afterwards we
-+ * can safely write the read request into the register.
-+ * After the data has been written, we wait until hardware
-+ * returns the correct value, if at any time the register
-+ * doesn't become available in time, reg will be 0xffffffff
-+ * which means we return 0xff to the caller.
-+ */
-+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1);
-+
-+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-+
-+ WAIT_FOR_RFCSR(rt2x00dev, ®);
-+ }
-+
-+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int word, const u32 value)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the RF becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_RF(rt2x00dev, ®)) {
-+ reg = 0;
-+ rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0);
-+ rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1);
-+
-+ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
-+ rt2x00_rf_write(rt2x00dev, word, value);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
-+ const u8 command, const u8 token,
-+ const u8 arg0, const u8 arg1)
-+{
-+ u32 reg;
-+
-+ mutex_lock(&rt2x00dev->csr_mutex);
-+
-+ /*
-+ * Wait until the MCU becomes available, afterwards we
-+ * can safely write the new data into the register.
-+ */
-+ if (WAIT_FOR_MCU(rt2x00dev, ®)) {
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
-+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1);
-+ rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
-+
-+ reg = 0;
-+ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command);
-+ rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
-+ }
-+
-+ mutex_unlock(&rt2x00dev->csr_mutex);
-+}
-+
-+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-+static const struct rt2x00debug rt2800usb_rt2x00debug = {
-+ .owner = THIS_MODULE,
-+ .csr = {
-+ .read = rt2x00usb_register_read,
-+ .write = rt2x00usb_register_write,
-+ .flags = RT2X00DEBUGFS_OFFSET,
-+ .word_base = CSR_REG_BASE,
-+ .word_size = sizeof(u32),
-+ .word_count = CSR_REG_SIZE / sizeof(u32),
-+ },
-+ .eeprom = {
-+ .read = rt2x00_eeprom_read,
-+ .write = rt2x00_eeprom_write,
-+ .word_base = EEPROM_BASE,
-+ .word_size = sizeof(u16),
-+ .word_count = EEPROM_SIZE / sizeof(u16),
-+ },
-+ .bbp = {
-+ .read = rt2800usb_bbp_read,
-+ .write = rt2800usb_bbp_write,
-+ .word_base = BBP_BASE,
-+ .word_size = sizeof(u8),
-+ .word_count = BBP_SIZE / sizeof(u8),
-+ },
-+ .rf = {
-+ .read = rt2x00_rf_read,
-+ .write = rt2800usb_rf_write,
-+ .word_base = RF_BASE,
-+ .word_size = sizeof(u32),
-+ .word_count = RF_SIZE / sizeof(u32),
-+ },
-+};
-+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-+
-+#ifdef CONFIG_RT2X00_LIB_RFKILL
-+static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®);
-+ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-+}
-+#else
-+#define rt2800usb_rfkill_poll NULL
-+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-+
-+#ifdef CONFIG_RT2X00_LIB_LEDS
-+static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
-+ enum led_brightness brightness)
-+{
-+ struct rt2x00_led *led =
-+ container_of(led_cdev, struct rt2x00_led, led_dev);
-+ unsigned int enabled = brightness != LED_OFF;
-+ unsigned int bg_mode =
-+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-+ unsigned int polarity =
-+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-+ EEPROM_FREQ_LED_POLARITY);
-+ unsigned int ledmode =
-+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-+ EEPROM_FREQ_LED_MODE);
-+
-+ if (led->type == LED_TYPE_RADIO) {
-+ rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+ enabled ? 0x20 : 0);
-+ } else if (led->type == LED_TYPE_ASSOC) {
-+ rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-+ } else if (led->type == LED_TYPE_QUALITY) {
-+ /*
-+ * The brightness is divided into 6 levels (0 - 5),
-+ * The specs tell us the following levels:
-+ * 0, 1 ,3, 7, 15, 31
-+ * to determine the level in a simple way we can simply
-+ * work with bitshifting:
-+ * (1 << level) - 1
-+ */
-+ rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-+ (1 << brightness / (LED_FULL / 6)) - 1,
-+ polarity);
-+ }
-+}
-+
-+static int rt2800usb_blink_set(struct led_classdev *led_cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct rt2x00_led *led =
-+ container_of(led_cdev, struct rt2x00_led, led_dev);
-+ u32 reg;
-+
-+ rt2x00usb_register_read(led->rt2x00dev, LED_CFG, ®);
-+ rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on);
-+ rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off);
-+ rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3);
-+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3);
-+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12);
-+ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3);
-+ rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1);
-+ rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00_led *led,
-+ enum led_type type)
-+{
-+ led->rt2x00dev = rt2x00dev;
-+ led->type = type;
-+ led->led_dev.brightness_set = rt2800usb_brightness_set;
-+ led->led_dev.blink_set = rt2800usb_blink_set;
-+ led->flags = LED_INITIALIZED;
-+}
-+#endif /* CONFIG_RT2X00_LIB_LEDS */
-+
-+/*
-+ * Configuration handlers.
-+ */
-+static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct mac_wcid_entry wcid_entry;
-+ struct mac_iveiv_entry iveiv_entry;
-+ u32 offset;
-+ u32 reg;
-+
-+ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-+
-+ rt2x00usb_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB,
-+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX,
-+ (crypto->cmd == SET_KEY) * crypto->bssidx);
-+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-+ rt2x00usb_register_write(rt2x00dev, offset, reg);
-+
-+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-+
-+ memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-+ if ((crypto->cipher == CIPHER_TKIP) ||
-+ (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-+ (crypto->cipher == CIPHER_AES))
-+ iveiv_entry.iv[3] |= 0x20;
-+ iveiv_entry.iv[3] |= key->keyidx << 6;
-+ rt2x00usb_register_multiwrite(rt2x00dev, offset,
-+ &iveiv_entry, sizeof(iveiv_entry));
-+
-+ offset = MAC_WCID_ENTRY(key->hw_key_idx);
-+
-+ memset(&wcid_entry, 0, sizeof(wcid_entry));
-+ if (crypto->cmd == SET_KEY)
-+ memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-+ rt2x00usb_register_multiwrite(rt2x00dev, offset,
-+ &wcid_entry, sizeof(wcid_entry));
-+}
-+
-+static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct hw_key_entry key_entry;
-+ struct rt2x00_field32 field;
-+ int timeout;
-+ u32 offset;
-+ u32 reg;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-+
-+ memcpy(key_entry.key, crypto->key,
-+ sizeof(key_entry.key));
-+ memcpy(key_entry.tx_mic, crypto->tx_mic,
-+ sizeof(key_entry.tx_mic));
-+ memcpy(key_entry.rx_mic, crypto->rx_mic,
-+ sizeof(key_entry.rx_mic));
-+
-+ offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT,
-+ offset, &key_entry,
-+ sizeof(key_entry),
-+ timeout);
-+ }
-+
-+ /*
-+ * The cipher types are stored over multiple registers
-+ * starting with SHARED_KEY_MODE_BASE each word will have
-+ * 32 bits and contains the cipher types for 2 bssidx each.
-+ * Using the correct defines correctly will cause overhead,
-+ * so just calculate the correct offset.
-+ */
-+ field.bit_offset = 4 * (key->hw_key_idx % 8);
-+ field.bit_mask = 0x7 << field.bit_offset;
-+
-+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-+
-+ rt2x00usb_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, field,
-+ (crypto->cmd == SET_KEY) * crypto->cipher);
-+ rt2x00usb_register_write(rt2x00dev, offset, reg);
-+
-+ /*
-+ * Update WCID information
-+ */
-+ rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-+
-+ return 0;
-+}
-+
-+static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ struct hw_key_entry key_entry;
-+ int timeout;
-+ u32 offset;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ /*
-+ * 1 pairwise key is possible per AID, this means that the AID
-+ * equals our hw_key_idx. Make sure the WCID starts _after_ the
-+ * last possible shared key entry.
-+ */
-+ if (crypto->aid > (256 - 32))
-+ return -ENOSPC;
-+
-+ key->hw_key_idx = 32 + crypto->aid;
-+
-+ memcpy(key_entry.key, crypto->key,
-+ sizeof(key_entry.key));
-+ memcpy(key_entry.tx_mic, crypto->tx_mic,
-+ sizeof(key_entry.tx_mic));
-+ memcpy(key_entry.rx_mic, crypto->rx_mic,
-+ sizeof(key_entry.rx_mic));
-+
-+ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT,
-+ offset, &key_entry,
-+ sizeof(key_entry),
-+ timeout);
-+ }
-+
-+ /*
-+ * Update WCID information
-+ */
-+ rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-+
-+ return 0;
-+}
-+
-+static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int filter_flags)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Start configuration steps.
-+ * Note that the version error will always be dropped
-+ * and broadcast frames will always be accepted since
-+ * there is no filter for it at this time.
-+ */
-+ rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, ®);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR,
-+ !(filter_flags & FIF_FCSFAIL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR,
-+ !(filter_flags & FIF_PLCPFAIL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME,
-+ !(filter_flags & FIF_PROMISC_IN_BSS));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST,
-+ !(filter_flags & FIF_ALLMULTI));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0);
-+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL,
-+ !(filter_flags & FIF_CONTROL));
-+ rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-+}
-+
-+static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00_intf *intf,
-+ struct rt2x00intf_conf *conf,
-+ const unsigned int flags)
-+{
-+ unsigned int beacon_base;
-+ u32 reg;
-+
-+ if (flags & CONFIG_UPDATE_TYPE) {
-+ /*
-+ * Clear current synchronisation setup.
-+ * For the Beacon base registers we only need to clear
-+ * the first byte since that byte contains the VALID and OWNER
-+ * bits which (when set to 0) will invalidate the entire beacon.
-+ */
-+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-+ rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
-+
-+ /*
-+ * Enable synchronisation.
-+ */
-+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+ }
-+
-+ if (flags & CONFIG_UPDATE_MAC) {
-+ reg = le32_to_cpu(conf->mac[1]);
-+ rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-+ conf->mac[1] = cpu_to_le32(reg);
-+
-+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-+ conf->mac, sizeof(conf->mac));
-+ }
-+
-+ if (flags & CONFIG_UPDATE_BSSID) {
-+ reg = le32_to_cpu(conf->bssid[1]);
-+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-+ conf->bssid[1] = cpu_to_le32(reg);
-+
-+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-+ conf->bssid, sizeof(conf->bssid));
-+ }
-+}
-+
-+static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_erp *erp)
-+{
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
-+ DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
-+ rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY,
-+ !!erp->short_preamble);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE,
-+ !!erp->short_preamble);
-+ rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL,
-+ erp->cts_protection ? 2 : 0);
-+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-+ erp->basic_rates);
-+ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-+
-+ rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®);
-+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-+ rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, ®);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs);
-+ rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-+ rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-+}
-+
-+static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
-+ struct antenna_setup *ant)
-+{
-+ u16 eeprom;
-+ u8 r1;
-+ u8 r3;
-+
-+ /*
-+ * FIXME: Use requested antenna configuration.
-+ */
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ rt2800usb_bbp_read(rt2x00dev, 1, &r1);
-+ rt2800usb_bbp_read(rt2x00dev, 3, &r3);
-+
-+ /*
-+ * Configure the TX antenna.
-+ */
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH)) {
-+ case 1:
-+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-+ break;
-+ case 2:
-+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-+ break;
-+ case 3:
-+ /* Do nothing */
-+ break;
-+ }
-+
-+ /*
-+ * Configure the RX antenna.
-+ */
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
-+ case 1:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-+ break;
-+ case 2:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-+ break;
-+ case 3:
-+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-+ break;
-+ }
-+
-+ rt2800usb_bbp_write(rt2x00dev, 3, r3);
-+ rt2800usb_bbp_write(rt2x00dev, 1, r1);
-+}
-+
-+static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u16 eeprom;
-+ short lna_gain;
-+
-+ if (libconf->rf.channel <= 14) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-+ } else if (libconf->rf.channel <= 64) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-+ } else if (libconf->rf.channel <= 128) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-+ } else {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-+ }
-+
-+ rt2x00dev->lna_gain = lna_gain;
-+}
-+
-+static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u16 eeprom;
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-+
-+ /*
-+ * Determine antenna settings from EEPROM
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+ } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2)
-+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-+
-+ if (rf->channel > 14) {
-+ /*
-+ * When TX power is below 0, we should increase it by 7 to
-+ * make it a positive value (Minumum value is -7).
-+ * However this means that values between 0 and 7 have
-+ * double meaning, and we should set a 7DBm boost flag.
-+ */
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-+ (info->tx_power1 >= 0));
-+
-+ if (info->tx_power1 < 0)
-+ info->tx_power1 += 7;
-+
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-+ TXPOWER_A_TO_DEV(info->tx_power1));
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-+ (info->tx_power2 >= 0));
-+
-+ if (info->tx_power2 < 0)
-+ info->tx_power2 += 7;
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-+ TXPOWER_A_TO_DEV(info->tx_power2));
-+ } else {
-+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-+ TXPOWER_G_TO_DEV(info->tx_power1));
-+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-+ TXPOWER_G_TO_DEV(info->tx_power2));
-+ }
-+
-+ rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-+
-+ rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-+
-+ udelay(200);
-+
-+ rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-+
-+ udelay(200);
-+
-+ rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-+}
-+
-+static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u8 rfcsr;
-+
-+ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
-+ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
-+
-+ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-+ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
-+
-+ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-+ TXPOWER_G_TO_DEV(info->tx_power1));
-+ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
-+
-+ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-+ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
-+
-+ if (conf_is_ht40(conf))
-+ rt2800usb_rfcsr_write(rt2x00dev, 24,
-+ rt2x00dev->calibration_bw40);
-+ else
-+ rt2800usb_rfcsr_write(rt2x00dev, 24,
-+ rt2x00dev->calibration_bw20);
-+
-+ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-+ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
-+}
-+
-+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u32 reg;
-+ unsigned int tx_pin;
-+ u16 eeprom;
-+ u8 bbp;
-+
-+ /*
-+ * Determine antenna settings from EEPROM
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-+ rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
-+ else
-+ rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
-+
-+ /*
-+ * Change BBP settings
-+ */
-+ rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-+ rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-+ rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-+ rt2800usb_bbp_write(rt2x00dev, 86, 0);
-+
-+ if (rf->channel <= 14) {
-+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-+ rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
-+ } else {
-+ rt2800usb_bbp_write(rt2x00dev, 82, 0x84);
-+ rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
-+ }
-+ } else {
-+ rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
-+
-+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-+ rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
-+ else
-+ rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
-+ }
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, ®);
-+ rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-+ rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14);
-+ rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14);
-+ rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
-+
-+ tx_pin = 0;
-+
-+ /* Turn on unused PA or LNA when not using 1T or 1R */
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) != 1) {
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-+ }
-+
-+ /* Turn on unused PA or LNA when not using 1T or 1R */
-+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) != 1) {
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-+ }
-+
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-+
-+ rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-+
-+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-+ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-+
-+ rt2800usb_bbp_read(rt2x00dev, 3, &bbp);
-+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-+ rt2800usb_bbp_write(rt2x00dev, 3, bbp);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+ if (conf_is_ht40(conf)) {
-+ rt2800usb_bbp_write(rt2x00dev, 69, 0x1a);
-+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800usb_bbp_write(rt2x00dev, 73, 0x16);
-+ } else {
-+ rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
-+ rt2800usb_bbp_write(rt2x00dev, 70, 0x08);
-+ rt2800usb_bbp_write(rt2x00dev, 73, 0x11);
-+ }
-+ }
-+
-+ msleep(1);
-+}
-+
-+static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
-+ const int txpower)
-+{
-+ u32 reg;
-+ u32 value = TXPOWER_G_TO_DEV(txpower);
-+ u8 r1;
-+
-+ rt2800usb_bbp_read(rt2x00dev, 1, &r1);
-+ rt2x00_set_field8(®, BBP1_TX_POWER, 0);
-+ rt2800usb_bbp_write(rt2x00dev, 1, r1);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value);
-+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value);
-+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value);
-+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value);
-+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, ®);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value);
-+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value);
-+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-+}
-+
-+static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT,
-+ libconf->conf->short_frame_max_tx_count);
-+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT,
-+ libconf->conf->long_frame_max_tx_count);
-+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-+ rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-+ rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0);
-+ rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-+ rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
-+}
-+
-+static void rt2800usb_config_duration(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL,
-+ libconf->conf->beacon_int * 16);
-+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+}
-+
-+static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf)
-+{
-+ enum dev_state state =
-+ (libconf->conf->flags & IEEE80211_CONF_PS) ?
-+ STATE_SLEEP : STATE_AWAKE;
-+ u32 reg;
-+
-+ if (state == STATE_SLEEP) {
-+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-+
-+ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-+ libconf->conf->listen_interval - 1);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-+
-+ rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
-+ } else {
-+ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
-+
-+ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-+ }
-+}
-+
-+static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_conf *libconf,
-+ const unsigned int flags)
-+{
-+ /* Always recalculate LNA gain before changing configuration */
-+ rt2800usb_config_lna_gain(rt2x00dev, libconf);
-+
-+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-+ rt2800usb_config_channel(rt2x00dev, libconf->conf,
-+ &libconf->rf, &libconf->channel);
-+ if (flags & IEEE80211_CONF_CHANGE_POWER)
-+ rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
-+ if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-+ rt2800usb_config_retry_limit(rt2x00dev, libconf);
-+ if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-+ rt2800usb_config_duration(rt2x00dev, libconf);
-+ if (flags & IEEE80211_CONF_CHANGE_PS)
-+ rt2800usb_config_ps(rt2x00dev, libconf);
-+}
-+
-+/*
-+ * Link tuning
-+ */
-+static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual)
-+{
-+ u32 reg;
-+
-+ /*
-+ * Update FCS error count from register.
-+ */
-+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®);
-+ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-+}
-+
-+static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-+{
-+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
-+ return 0x1c + (2 * rt2x00dev->lna_gain);
-+ else
-+ return 0x2e + rt2x00dev->lna_gain;
-+ }
-+
-+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-+ else
-+ return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-+}
-+
-+static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual, u8 vgc_level)
-+{
-+ if (qual->vgc_level != vgc_level) {
-+ rt2800usb_bbp_write(rt2x00dev, 66, vgc_level);
-+ qual->vgc_level = vgc_level;
-+ qual->vgc_level_reg = vgc_level;
-+ }
-+}
-+
-+static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual)
-+{
-+ rt2800usb_set_vgc(rt2x00dev, qual,
-+ rt2800usb_get_default_vgc(rt2x00dev));
-+}
-+
-+static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
-+ struct link_qual *qual, const u32 count)
-+{
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-+ return;
-+
-+ /*
-+ * When RSSI is better then -80 increase VGC level with 0x10
-+ */
-+ rt2800usb_set_vgc(rt2x00dev, qual,
-+ rt2800usb_get_default_vgc(rt2x00dev) +
-+ ((qual->rssi > -80) * 0x10));
-+}
-+
-+/*
-+ * Firmware functions
-+ */
-+static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
-+{
-+ return FIRMWARE_RT2870;
-+}
-+
-+static bool rt2800usb_check_crc(const u8 *data, const size_t len)
-+{
-+ u16 fw_crc;
-+ u16 crc;
-+
-+ /*
-+ * The last 2 bytes in the firmware array are the crc checksum itself,
-+ * this means that we should never pass those 2 bytes to the crc
-+ * algorithm.
-+ */
-+ fw_crc = (data[len - 2] << 8 | data[len - 1]);
-+
-+ /*
-+ * Use the crc ccitt algorithm.
-+ * This will return the same value as the legacy driver which
-+ * used bit ordering reversion on the both the firmware bytes
-+ * before input input as well as on the final output.
-+ * Obviously using crc ccitt directly is much more efficient.
-+ */
-+ crc = crc_ccitt(~0, data, len - 2);
-+
-+ /*
-+ * There is a small difference between the crc-itu-t + bitrev and
-+ * the crc-ccitt crc calculation. In the latter method the 2 bytes
-+ * will be swapped, use swab16 to convert the crc to the correct
-+ * value.
-+ */
-+ crc = swab16(crc);
-+
-+ return fw_crc == crc;
-+}
-+
-+static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
-+ const u8 *data, const size_t len)
-+{
-+ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
-+ size_t offset = 0;
-+
-+ /*
-+ * Firmware files:
-+ * There are 2 variations of the rt2870 firmware.
-+ * a) size: 4kb
-+ * b) size: 8kb
-+ * Note that (b) contains 2 seperate firmware blobs of 4k
-+ * within the file. The first blob is the same firmware as (a),
-+ * but the second blob is for the additional chipsets.
-+ */
-+ if (len != 4096 && len != 8192)
-+ return FW_BAD_LENGTH;
-+
-+ /*
-+ * Check if we need the upper 4kb firmware data or not.
-+ */
-+ if ((len == 4096) &&
-+ (chipset != 0x2860) &&
-+ (chipset != 0x2872) &&
-+ (chipset != 0x3070))
-+ return FW_BAD_VERSION;
-+
-+ /*
-+ * 8kb firmware files must be checked as if it were
-+ * 2 seperate firmware files.
-+ */
-+ while (offset < len) {
-+ if (!rt2800usb_check_crc(data + offset, 4096))
-+ return FW_BAD_CRC;
-+
-+ offset += 4096;
-+ }
-+
-+ return FW_OK;
-+}
-+
-+static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
-+ const u8 *data, const size_t len)
-+{
-+ unsigned int i;
-+ int status;
-+ u32 reg;
-+ u32 offset;
-+ u32 length;
-+ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
-+
-+ /*
-+ * Check which section of the firmware we need.
-+ */
-+ if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) {
-+ offset = 0;
-+ length = 4096;
-+ } else {
-+ offset = 4096;
-+ length = 4096;
-+ }
-+
-+ /*
-+ * Wait for stable hardware.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
-+ if (reg && reg != ~0)
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "Unstable hardware.\n");
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Write firmware to device.
-+ */
-+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT,
-+ FIRMWARE_IMAGE_BASE,
-+ data + offset, length,
-+ REGISTER_TIMEOUT32(length));
-+
-+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
-+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
-+
-+ /*
-+ * Send firmware request to device to load firmware,
-+ * we need to specify a long timeout time.
-+ */
-+ status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
-+ 0, USB_MODE_FIRMWARE,
-+ REGISTER_TIMEOUT_FIRMWARE);
-+ if (status < 0) {
-+ ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
-+ return status;
-+ }
-+
-+ /*
-+ * Wait for device to stabilize.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
-+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "PBF system register not ready.\n");
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Initialize firmware.
-+ */
-+ rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-+ msleep(1);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Initialization functions.
-+ */
-+static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ unsigned int i;
-+
-+ /*
-+ * Wait untill BBP and RF are ready.
-+ */
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
-+ if (reg && reg != ~0)
-+ break;
-+ msleep(1);
-+ }
-+
-+ if (i == REGISTER_BUSY_COUNT) {
-+ ERROR(rt2x00dev, "Unstable hardware.\n");
-+ return -EBUSY;
-+ }
-+
-+ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®);
-+ rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
-+
-+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1);
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-+
-+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
-+ USB_MODE_RESET, REGISTER_TIMEOUT);
-+
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-+
-+ rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, ®);
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
-+ rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-+ rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, ®);
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
-+ rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-+ rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-+ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-+
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-+
-+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-+ } else {
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
-+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-+ }
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
-+ rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0);
-+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0);
-+ rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
-+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-+ rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2);
-+ else
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0);
-+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0);
-+ rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-+
-+ rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
-+ rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-+ rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
-+
-+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
-+ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-+ rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES,
-+ IEEE80211_MAX_RTS_THRESHOLD);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0);
-+ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-+ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-+
-+ /*
-+ * ASIC will keep garbage value after boot, clear encryption keys.
-+ */
-+ for (i = 0; i < 256; i++) {
-+ u32 wcid[2] = { 0xffffffff, 0x00ffffff };
-+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
-+ wcid, sizeof(wcid));
-+
-+ rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
-+ rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
-+ }
-+
-+ for (i = 0; i < 16; i++)
-+ rt2x00usb_register_write(rt2x00dev,
-+ SHARED_KEY_MODE_ENTRY(i), 0);
-+
-+ /*
-+ * Clear all beacons
-+ * For the Beacon base registers we only need to clear
-+ * the first byte since that byte contains the VALID and OWNER
-+ * bits which (when set to 0) will invalidate the entire beacon.
-+ */
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-+
-+ rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, ®);
-+ rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30);
-+ rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, ®);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5);
-+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6);
-+ rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, ®);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13);
-+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14);
-+ rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14);
-+ rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1);
-+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2);
-+ rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-+
-+ /*
-+ * We must clear the error counters.
-+ * These registers are cleared on read,
-+ * so we may pass a useless variable to store the value.
-+ */
-+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®);
-+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®);
-+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, ®);
-+ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, ®);
-+ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, ®);
-+ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, ®);
-+
-+ return 0;
-+}
-+
-+static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, ®);
-+ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
-+ return 0;
-+
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u8 value;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_bbp_read(rt2x00dev, 0, &value);
-+ if ((value != 0xff) && (value != 0x00))
-+ return 0;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u16 eeprom;
-+ u8 reg_id;
-+ u8 value;
-+
-+ if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
-+ rt2800usb_wait_bbp_ready(rt2x00dev)))
-+ return -EACCES;
-+
-+ rt2800usb_bbp_write(rt2x00dev, 65, 0x2c);
-+ rt2800usb_bbp_write(rt2x00dev, 66, 0x38);
-+ rt2800usb_bbp_write(rt2x00dev, 69, 0x12);
-+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800usb_bbp_write(rt2x00dev, 73, 0x10);
-+ rt2800usb_bbp_write(rt2x00dev, 81, 0x37);
-+ rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800usb_bbp_write(rt2x00dev, 83, 0x6a);
-+ rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
-+ rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
-+ rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
-+ rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
-+ rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
-+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-+ rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
-+ rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
-+ }
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
-+ rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
-+ }
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
-+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-+ rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
-+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
-+ }
-+
-+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-+
-+ if (eeprom != 0xffff && eeprom != 0x0000) {
-+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
-+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-+ rt2800usb_bbp_write(rt2x00dev, reg_id, value);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-+ bool bw40, u8 rfcsr24, u8 filter_target)
-+{
-+ unsigned int i;
-+ u8 bbp;
-+ u8 rfcsr;
-+ u8 passband;
-+ u8 stopband;
-+ u8 overtuned = 0;
-+
-+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+
-+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-+ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-+
-+ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-+ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /*
-+ * Set power & frequency of passband test tone
-+ */
-+ rt2800usb_bbp_write(rt2x00dev, 24, 0);
-+
-+ for (i = 0; i < 100; i++) {
-+ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
-+ msleep(1);
-+
-+ rt2800usb_bbp_read(rt2x00dev, 55, &passband);
-+ if (passband)
-+ break;
-+ }
-+
-+ /*
-+ * Set power & frequency of stopband test tone
-+ */
-+ rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
-+
-+ for (i = 0; i < 100; i++) {
-+ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
-+ msleep(1);
-+
-+ rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
-+
-+ if ((passband - stopband) <= filter_target) {
-+ rfcsr24++;
-+ overtuned += ((passband - stopband) == filter_target);
-+ } else
-+ break;
-+
-+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+ }
-+
-+ rfcsr24 -= !!overtuned;
-+
-+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-+ return rfcsr24;
-+}
-+
-+static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-+{
-+ u8 rfcsr;
-+ u8 bbp;
-+
-+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-+ return 0;
-+
-+ /*
-+ * Init RF calibration.
-+ */
-+ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-+ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
-+ msleep(1);
-+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-+ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
-+
-+ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
-+ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
-+ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
-+ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
-+ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
-+ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
-+ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
-+ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
-+ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
-+ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
-+ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
-+ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
-+ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
-+ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
-+ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
-+ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
-+ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
-+ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
-+ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
-+ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
-+
-+ /*
-+ * Set RX Filter calibration for 20MHz and 40MHz
-+ */
-+ rt2x00dev->calibration_bw20 =
-+ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-+ rt2x00dev->calibration_bw40 =
-+ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-+
-+ /*
-+ * Set back to initial state
-+ */
-+ rt2800usb_bbp_write(rt2x00dev, 24, 0);
-+
-+ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
-+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-+ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ /*
-+ * set BBP back to BW20
-+ */
-+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-+ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Device state switch handlers.
-+ */
-+static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX,
-+ (state == STATE_RADIO_RX_ON) ||
-+ (state == STATE_RADIO_RX_ON_LINK));
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+}
-+
-+static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-+ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-+ return 0;
-+
-+ msleep(1);
-+ }
-+
-+ ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-+ return -EACCES;
-+}
-+
-+static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ u16 word;
-+
-+ /*
-+ * Initialize all registers.
-+ */
-+ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
-+ rt2800usb_init_registers(rt2x00dev) ||
-+ rt2800usb_init_bbp(rt2x00dev) ||
-+ rt2800usb_init_rfcsr(rt2x00dev)))
-+ return -EIO;
-+
-+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ udelay(50);
-+
-+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-+ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+
-+ rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®);
-+ rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0);
-+ /* Don't use bulk in aggregation when working with USB 1.1 */
-+ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN,
-+ (rt2x00dev->rx->usb_maxpacket == 512));
-+ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
-+ /* FIXME: Calculate this value based on Aggregation defines */
-+ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_LIMIT, 21);
-+ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1);
-+ rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1);
-+ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1);
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-+
-+ /*
-+ * Send signal to firmware during boot time.
-+ */
-+ rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
-+
-+ /*
-+ * Initialize LED control
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-+ rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-+ rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-+ rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
-+ word & 0xff, (word >> 8) & 0xff);
-+
-+ return 0;
-+}
-+
-+static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
-+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-+ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-+ rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
-+
-+ /* Wait for DMA, ignore error */
-+ rt2800usb_wait_wpdma_ready(rt2x00dev);
-+
-+ rt2x00usb_disable_radio(rt2x00dev);
-+}
-+
-+static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-+
-+ if (state == STATE_AWAKE)
-+ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
-+ else
-+ rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
-+
-+ return 0;
-+}
-+
-+static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
-+ enum dev_state state)
-+{
-+ int retval = 0;
-+
-+ switch (state) {
-+ case STATE_RADIO_ON:
-+ /*
-+ * Before the radio can be enabled, the device first has
-+ * to be woken up. After that it needs a bit of time
-+ * to be fully awake and the radio can be enabled.
-+ */
-+ rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
-+ msleep(1);
-+ retval = rt2800usb_enable_radio(rt2x00dev);
-+ break;
-+ case STATE_RADIO_OFF:
-+ /*
-+ * After the radio has been disablee, the device should
-+ * be put to sleep for powersaving.
-+ */
-+ rt2800usb_disable_radio(rt2x00dev);
-+ rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
-+ break;
-+ case STATE_RADIO_RX_ON:
-+ case STATE_RADIO_RX_ON_LINK:
-+ case STATE_RADIO_RX_OFF:
-+ case STATE_RADIO_RX_OFF_LINK:
-+ rt2800usb_toggle_rx(rt2x00dev, state);
-+ break;
-+ case STATE_RADIO_IRQ_ON:
-+ case STATE_RADIO_IRQ_OFF:
-+ /* No support, but no error either */
-+ break;
-+ case STATE_DEEP_SLEEP:
-+ case STATE_SLEEP:
-+ case STATE_STANDBY:
-+ case STATE_AWAKE:
-+ retval = rt2800usb_set_state(rt2x00dev, state);
-+ break;
-+ default:
-+ retval = -ENOTSUPP;
-+ break;
-+ }
-+
-+ if (unlikely(retval))
-+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
-+ state, retval);
-+
-+ return retval;
-+}
-+
-+/*
-+ * TX descriptor initialization
-+ */
-+static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
-+ struct sk_buff *skb,
-+ struct txentry_desc *txdesc)
-+{
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-+ __le32 *txi = skbdesc->desc;
-+ __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
-+ u32 word;
-+
-+ /*
-+ * Initialize TX Info descriptor
-+ */
-+ rt2x00_desc_read(txwi, 0, &word);
-+ rt2x00_set_field32(&word, TXWI_W0_FRAG,
-+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
-+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
-+ rt2x00_set_field32(&word, TXWI_W0_TS,
-+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
-+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
-+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
-+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
-+ rt2x00_set_field32(&word, TXWI_W0_BW,
-+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
-+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
-+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
-+ rt2x00_desc_write(txwi, 0, word);
-+
-+ rt2x00_desc_read(txwi, 1, &word);
-+ rt2x00_set_field32(&word, TXWI_W1_ACK,
-+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
-+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
-+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
-+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
-+ txdesc->key_idx : 0xff);
-+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, skb->len);
-+ rt2x00_set_field32(&word, TXWI_W1_PACKETID,
-+ skbdesc->entry->entry_idx);
-+ rt2x00_desc_write(txwi, 1, word);
-+
-+ /*
-+ * Always write 0 to IV/EIV fields, hardware will insert the IV
-+ * from the IVEIV register when TXINFO_W0_WIV is set to 0.
-+ * When TXINFO_W0_WIV is set to 1 it will use the IV data
-+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
-+ * crypto entry in the registers should be used to encrypt the frame.
-+ */
-+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
-+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
-+
-+ /*
-+ * Initialize TX descriptor
-+ */
-+ rt2x00_desc_read(txi, 0, &word);
-+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
-+ skb->len + TXWI_DESC_SIZE);
-+ rt2x00_set_field32(&word, TXINFO_W0_WIV,
-+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
-+ rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
-+ rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
-+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
-+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
-+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-+ rt2x00_desc_write(txi, 0, word);
-+}
-+
-+/*
-+ * TX data initialization
-+ */
-+static void rt2800usb_write_beacon(struct queue_entry *entry)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ unsigned int beacon_base;
-+ u32 reg;
-+
-+ /*
-+ * Add the descriptor in front of the skb.
-+ */
-+ skb_push(entry->skb, entry->queue->desc_size);
-+ memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
-+ skbdesc->desc = entry->skb->data;
-+
-+ /*
-+ * Disable beaconing while we are reloading the beacon data,
-+ * otherwise we might be sending out invalid data.
-+ */
-+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+
-+ /*
-+ * Write entire beacon with descriptor to register.
-+ */
-+ beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT, beacon_base,
-+ entry->skb->data, entry->skb->len,
-+ REGISTER_TIMEOUT32(entry->skb->len));
-+
-+ /*
-+ * Clean up the beacon skb.
-+ */
-+ dev_kfree_skb(entry->skb);
-+ entry->skb = NULL;
-+}
-+
-+static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
-+{
-+ int length;
-+
-+ /*
-+ * The length _must_ include 4 bytes padding,
-+ * it should always be multiple of 4,
-+ * but it must _not_ be a multiple of the USB packet size.
-+ */
-+ length = roundup(entry->skb->len + 4, 4);
-+ length += (4 * !(length % entry->queue->usb_maxpacket));
-+
-+ return length;
-+}
-+
-+static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-+ const enum data_queue_qid queue)
-+{
-+ u32 reg;
-+
-+ if (queue != QID_BEACON) {
-+ rt2x00usb_kick_tx_queue(rt2x00dev, queue);
-+ return;
-+ }
-+
-+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®);
-+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1);
-+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-+ }
-+}
-+
-+/*
-+ * RX control handlers
-+ */
-+static void rt2800usb_fill_rxdone(struct queue_entry *entry,
-+ struct rxdone_entry_desc *rxdesc)
-+{
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+ __le32 *rxd = (__le32 *)entry->skb->data;
-+ __le32 *rxwi;
-+ u32 rxd0;
-+ u32 rxwi0;
-+ u32 rxwi1;
-+ u32 rxwi2;
-+ u32 rxwi3;
-+
-+ /*
-+ * Copy descriptor to the skbdesc->desc buffer, making it safe from
-+ * moving of frame data in rt2x00usb.
-+ */
-+ memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
-+ rxd = (__le32 *)skbdesc->desc;
-+ rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)];
-+
-+ /*
-+ * It is now safe to read the descriptor on all architectures.
-+ */
-+ rt2x00_desc_read(rxd, 0, &rxd0);
-+ rt2x00_desc_read(rxwi, 0, &rxwi0);
-+ rt2x00_desc_read(rxwi, 1, &rxwi1);
-+ rt2x00_desc_read(rxwi, 2, &rxwi2);
-+ rt2x00_desc_read(rxwi, 3, &rxwi3);
-+
-+ if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
-+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
-+
-+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-+ rxdesc->cipher_status =
-+ rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
-+ }
-+
-+ if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
-+ /*
-+ * Hardware has stripped IV/EIV data from 802.11 frame during
-+ * decryption. Unfortunately the descriptor doesn't contain
-+ * any fields with the EIV/IV data either, so they can't
-+ * be restored by rt2x00lib.
-+ */
-+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-+
-+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
-+ rxdesc->flags |= RX_FLAG_DECRYPTED;
-+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
-+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
-+ }
-+
-+ if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
-+ rxdesc->dev_flags |= RXDONE_MY_BSS;
-+
-+ if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
-+ rxdesc->flags |= RX_FLAG_SHORT_GI;
-+
-+ if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
-+ rxdesc->flags |= RX_FLAG_40MHZ;
-+
-+ /*
-+ * Detect RX rate, always use MCS as signal type.
-+ */
-+ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
-+ rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
-+ rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
-+
-+ /*
-+ * Mask of 0x8 bit to remove the short preamble flag.
-+ */
-+ if (rxdesc->rate_mode == RATE_MODE_CCK)
-+ rxdesc->signal &= ~0x8;
-+
-+ rxdesc->rssi =
-+ (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
-+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
-+
-+ rxdesc->noise =
-+ (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
-+ rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
-+
-+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
-+
-+ /*
-+ * Remove RXWI descriptor from start of buffer.
-+ */
-+ skb_pull(entry->skb, skbdesc->desc_len);
-+ skb_trim(entry->skb, rxdesc->size);
-+}
-+
-+/*
-+ * Device probe functions.
-+ */
-+static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
-+{
-+ u16 word;
-+ u8 *mac;
-+ u8 default_lna_gain;
-+
-+ rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
-+
-+ /*
-+ * Start validation of the data that has been read.
-+ */
-+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
-+ if (!is_valid_ether_addr(mac)) {
-+ DECLARE_MAC_BUF(macbuf);
-+
-+ random_ether_addr(mac);
-+ EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
-+ if (word == 0xffff) {
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-+ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
-+ } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
-+ /*
-+ * There is a max of 2 RX streams for RT2860 series
-+ */
-+ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
-+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
-+ if (word == 0xffff) {
-+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
-+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
-+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
-+ }
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
-+ if ((word & 0x00ff) == 0x00ff) {
-+ rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
-+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
-+ LED_MODE_TXRX_ACTIVITY);
-+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
-+ EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
-+ }
-+
-+ /*
-+ * During the LNA validation we are going to use
-+ * lna0 as correct value. Note that EEPROM_LNA
-+ * is never validated.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
-+ default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
-+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
-+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-+ default_lna_gain);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
-+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
-+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
-+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
-+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-+ default_lna_gain);
-+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-+
-+ return 0;
-+}
-+
-+static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ u16 value;
-+ u16 eeprom;
-+
-+ /*
-+ * Read EEPROM word for configuration.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ /*
-+ * Identify RF chipset.
-+ */
-+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
-+ rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
-+
-+ /*
-+ * The check for rt2860 is not a typo, some rt2870 hardware
-+ * identifies itself as rt2860 in the CSR register.
-+ */
-+ if ((rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x2860) &&
-+ (rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x2870) &&
-+ (rt2x00_get_field32(reg, MAC_CSR0_ASIC_VER) != 0x3070)) {
-+ ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
-+ return -ENODEV;
-+ }
-+
-+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+ !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
-+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
-+ return -ENODEV;
-+ }
-+
-+ /*
-+ * Read frequency offset and RF programming sequence.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
-+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-+
-+ /*
-+ * Read external LNA informations.
-+ */
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-+
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
-+ __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
-+ __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-+
-+ /*
-+ * Detect if this device has an hardware controlled radio.
-+ */
-+#ifdef CONFIG_RT2X00_LIB_RFKILL
-+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
-+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-+#endif /* CONFIG_RT2X00_LIB_RFKILL */
-+
-+ /*
-+ * Store led settings, for correct led behaviour.
-+ */
-+#ifdef CONFIG_RT2X00_LIB_LEDS
-+ rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-+ rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-+ rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
-+ &rt2x00dev->led_mcu_reg);
-+#endif /* CONFIG_RT2X00_LIB_LEDS */
-+
-+ return 0;
-+}
-+
-+/*
-+ * RF value list for rt2870
-+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
-+ */
-+static const struct rf_channel rf_vals[] = {
-+ { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
-+ { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
-+ { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
-+ { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
-+ { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
-+ { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
-+ { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
-+ { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
-+ { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
-+ { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
-+ { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
-+ { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
-+ { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
-+ { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
-+
-+ /* 802.11 UNI / HyperLan 2 */
-+ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
-+ { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
-+ { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
-+ { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
-+ { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
-+ { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
-+ { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
-+ { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
-+ { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
-+ { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
-+ { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
-+ { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
-+
-+ /* 802.11 HyperLan 2 */
-+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
-+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
-+ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
-+ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
-+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
-+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
-+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
-+ { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
-+ { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
-+ { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
-+ { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
-+ { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
-+ { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
-+ { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
-+ { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
-+ { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
-+
-+ /* 802.11 UNII */
-+ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
-+ { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
-+ { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
-+ { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
-+ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
-+ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
-+ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
-+ { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
-+ { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
-+ { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
-+ { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
-+
-+ /* 802.11 Japan */
-+ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
-+ { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
-+ { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
-+ { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
-+ { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
-+ { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
-+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
-+};
-+
-+/*
-+ * RF value list for rt3070
-+ * Supports: 2.4 GHz
-+ */
-+static const struct rf_channel rf_vals_3070[] = {
-+ {1, 241, 2, 2 },
-+ {2, 241, 2, 7 },
-+ {3, 242, 2, 2 },
-+ {4, 242, 2, 7 },
-+ {5, 243, 2, 2 },
-+ {6, 243, 2, 7 },
-+ {7, 244, 2, 2 },
-+ {8, 244, 2, 7 },
-+ {9, 245, 2, 2 },
-+ {10, 245, 2, 7 },
-+ {11, 246, 2, 2 },
-+ {12, 246, 2, 7 },
-+ {13, 247, 2, 2 },
-+ {14, 248, 2, 4 },
-+};
-+
-+static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
-+{
-+ struct hw_mode_spec *spec = &rt2x00dev->spec;
-+ struct channel_info *info;
-+ char *tx_power1;
-+ char *tx_power2;
-+ unsigned int i;
-+ u16 eeprom;
-+
-+ /*
-+ * Initialize all hw fields.
-+ */
-+ rt2x00dev->hw->flags =
-+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-+ IEEE80211_HW_SIGNAL_DBM |
-+ IEEE80211_HW_SUPPORTS_PS |
-+ IEEE80211_HW_PS_NULLFUNC_STACK;
-+ rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
-+
-+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
-+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
-+ rt2x00_eeprom_addr(rt2x00dev,
-+ EEPROM_MAC_ADDR_0));
-+
-+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-+
-+ /*
-+ * Initialize HT information.
-+ */
-+ spec->ht.ht_supported = true;
-+ spec->ht.cap =
-+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-+ IEEE80211_HT_CAP_GRN_FLD |
-+ IEEE80211_HT_CAP_SGI_20 |
-+ IEEE80211_HT_CAP_SGI_40 |
-+ IEEE80211_HT_CAP_TX_STBC |
-+ IEEE80211_HT_CAP_RX_STBC |
-+ IEEE80211_HT_CAP_PSMP_SUPPORT;
-+ spec->ht.ampdu_factor = 3;
-+ spec->ht.ampdu_density = 4;
-+ spec->ht.mcs.tx_params =
-+ IEEE80211_HT_MCS_TX_DEFINED |
-+ IEEE80211_HT_MCS_TX_RX_DIFF |
-+ ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
-+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-+
-+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
-+ case 3:
-+ spec->ht.mcs.rx_mask[2] = 0xff;
-+ case 2:
-+ spec->ht.mcs.rx_mask[1] = 0xff;
-+ case 1:
-+ spec->ht.mcs.rx_mask[0] = 0xff;
-+ spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
-+ break;
-+ }
-+
-+ /*
-+ * Initialize hw_mode information.
-+ */
-+ spec->supported_bands = SUPPORT_BAND_2GHZ;
-+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-+
-+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2720)) {
-+ spec->num_channels = 14;
-+ spec->channels = rf_vals;
-+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2750)) {
-+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
-+ spec->num_channels = ARRAY_SIZE(rf_vals);
-+ spec->channels = rf_vals;
-+ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
-+ rt2x00_rf(&rt2x00dev->chip, RF2020)) {
-+ spec->num_channels = ARRAY_SIZE(rf_vals_3070);
-+ spec->channels = rf_vals_3070;
-+ }
-+
-+ /*
-+ * Create channel information array
-+ */
-+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ spec->channels_info = info;
-+
-+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
-+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
-+
-+ for (i = 0; i < 14; i++) {
-+ info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
-+ info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
-+ }
-+
-+ if (spec->num_channels > 14) {
-+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
-+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
-+
-+ for (i = 14; i < spec->num_channels; i++) {
-+ info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
-+ info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
-+{
-+ int retval;
-+
-+ /*
-+ * Allocate eeprom data.
-+ */
-+ retval = rt2800usb_validate_eeprom(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ retval = rt2800usb_init_eeprom(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * Initialize hw specifications.
-+ */
-+ retval = rt2800usb_probe_hw_mode(rt2x00dev);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * This device requires firmware.
-+ */
-+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
-+ __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
-+ if (!modparam_nohwcrypt)
-+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
-+
-+ /*
-+ * Set the rssi offset.
-+ */
-+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-+
-+ return 0;
-+}
-+
-+/*
-+ * IEEE80211 stack callback functions.
-+ */
-+static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-+ u32 *iv32, u16 *iv16)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ struct mac_iveiv_entry iveiv_entry;
-+ u32 offset;
-+
-+ offset = MAC_IVEIV_ENTRY(hw_key_idx);
-+ rt2x00usb_register_multiread(rt2x00dev, offset,
-+ &iveiv_entry, sizeof(iveiv_entry));
-+
-+ memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
-+ memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-+}
-+
-+static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ u32 reg;
-+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-+
-+ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®);
-+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value);
-+ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®);
-+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®);
-+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®);
-+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled);
-+ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-+ const struct ieee80211_tx_queue_params *params)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ struct data_queue *queue;
-+ struct rt2x00_field32 field;
-+ int retval;
-+ u32 reg;
-+ u32 offset;
-+
-+ /*
-+ * First pass the configuration through rt2x00lib, that will
-+ * update the queue settings and validate the input. After that
-+ * we are free to update the registers based on the value
-+ * in the queue parameter.
-+ */
-+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
-+ if (retval)
-+ return retval;
-+
-+ /*
-+ * We only need to perform additional register initialization
-+ * for WMM queues/
-+ */
-+ if (queue_idx >= 4)
-+ return 0;
-+
-+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-+
-+ /* Update WMM TXOP register */
-+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
-+ field.bit_offset = (queue_idx & 1) * 16;
-+ field.bit_mask = 0xffff << field.bit_offset;
-+
-+ rt2x00usb_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, field, queue->txop);
-+ rt2x00usb_register_write(rt2x00dev, offset, reg);
-+
-+ /* Update WMM registers */
-+ field.bit_offset = queue_idx * 4;
-+ field.bit_mask = 0xf << field.bit_offset;
-+
-+ rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->aifs);
-+ rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->cw_min);
-+ rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-+
-+ rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, ®);
-+ rt2x00_set_field32(®, field, queue->cw_max);
-+ rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-+
-+ /* Update EDCA registers */
-+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-+
-+ rt2x00usb_register_read(rt2x00dev, offset, ®);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-+ rt2x00usb_register_write(rt2x00dev, offset, reg);
-+
-+ return 0;
-+}
-+
-+static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
-+{
-+ struct rt2x00_dev *rt2x00dev = hw->priv;
-+ u64 tsf;
-+ u32 reg;
-+
-+ rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, ®);
-+ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-+ rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, ®);
-+ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-+
-+ return tsf;
-+}
-+
-+static const struct ieee80211_ops rt2800usb_mac80211_ops = {
-+ .tx = rt2x00mac_tx,
-+ .start = rt2x00mac_start,
-+ .stop = rt2x00mac_stop,
-+ .add_interface = rt2x00mac_add_interface,
-+ .remove_interface = rt2x00mac_remove_interface,
-+ .config = rt2x00mac_config,
-+ .config_interface = rt2x00mac_config_interface,
-+ .configure_filter = rt2x00mac_configure_filter,
-+ .set_key = rt2x00mac_set_key,
-+ .get_stats = rt2x00mac_get_stats,
-+ .get_tkip_seq = rt2800usb_get_tkip_seq,
-+ .set_rts_threshold = rt2800usb_set_rts_threshold,
-+ .bss_info_changed = rt2x00mac_bss_info_changed,
-+ .conf_tx = rt2800usb_conf_tx,
-+ .get_tx_stats = rt2x00mac_get_tx_stats,
-+ .get_tsf = rt2800usb_get_tsf,
-+};
-+
-+static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
-+ .probe_hw = rt2800usb_probe_hw,
-+ .get_firmware_name = rt2800usb_get_firmware_name,
-+ .check_firmware = rt2800usb_check_firmware,
-+ .load_firmware = rt2800usb_load_firmware,
-+ .initialize = rt2x00usb_initialize,
-+ .uninitialize = rt2x00usb_uninitialize,
-+ .clear_entry = rt2x00usb_clear_entry,
-+ .set_device_state = rt2800usb_set_device_state,
-+ .rfkill_poll = rt2800usb_rfkill_poll,
-+ .link_stats = rt2800usb_link_stats,
-+ .reset_tuner = rt2800usb_reset_tuner,
-+ .link_tuner = rt2800usb_link_tuner,
-+ .write_tx_desc = rt2800usb_write_tx_desc,
-+ .write_tx_data = rt2x00usb_write_tx_data,
-+ .write_beacon = rt2800usb_write_beacon,
-+ .get_tx_data_len = rt2800usb_get_tx_data_len,
-+ .kick_tx_queue = rt2800usb_kick_tx_queue,
-+ .kill_tx_queue = rt2x00usb_kill_tx_queue,
-+ .fill_rxdone = rt2800usb_fill_rxdone,
-+ .config_shared_key = rt2800usb_config_shared_key,
-+ .config_pairwise_key = rt2800usb_config_pairwise_key,
-+ .config_filter = rt2800usb_config_filter,
-+ .config_intf = rt2800usb_config_intf,
-+ .config_erp = rt2800usb_config_erp,
-+ .config_ant = rt2800usb_config_ant,
-+ .config = rt2800usb_config,
-+};
-+
-+static const struct data_queue_desc rt2800usb_queue_rx = {
-+ .entry_num = RX_ENTRIES,
-+ .data_size = AGGREGATION_SIZE,
-+ .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_usb),
-+};
-+
-+static const struct data_queue_desc rt2800usb_queue_tx = {
-+ .entry_num = TX_ENTRIES,
-+ .data_size = AGGREGATION_SIZE,
-+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_usb),
-+};
-+
-+static const struct data_queue_desc rt2800usb_queue_bcn = {
-+ .entry_num = 8 * BEACON_ENTRIES,
-+ .data_size = MGMT_FRAME_SIZE,
-+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
-+ .priv_size = sizeof(struct queue_entry_priv_usb),
-+};
-+
-+static const struct rt2x00_ops rt2800usb_ops = {
-+ .name = KBUILD_MODNAME,
-+ .max_sta_intf = 1,
-+ .max_ap_intf = 8,
-+ .eeprom_size = EEPROM_SIZE,
-+ .rf_size = RF_SIZE,
-+ .tx_queues = NUM_TX_QUEUES,
-+ .rx = &rt2800usb_queue_rx,
-+ .tx = &rt2800usb_queue_tx,
-+ .bcn = &rt2800usb_queue_bcn,
-+ .lib = &rt2800usb_rt2x00_ops,
-+ .hw = &rt2800usb_mac80211_ops,
-+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-+ .debugfs = &rt2800usb_rt2x00debug,
-+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-+};
-+
-+/*
-+ * rt2800usb module information.
-+ */
-+static struct usb_device_id rt2800usb_device_table[] = {
-+ /* Abocom */
-+ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* AirTies */
-+ { USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Amigo */
-+ { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Amit */
-+ { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* ASUS */
-+ { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* AzureWave */
-+ { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Belkin */
-+ { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Buffalo */
-+ { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Conceptronic */
-+ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Corega */
-+ { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* D-Link */
-+ { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x2001, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x2001, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Edimax */
-+ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* EnGenius */
-+ { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Gemtek */
-+ { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Gigabyte */
-+ { USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Hawking */
-+ { USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* LevelOne */
-+ { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Linksys */
-+ { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Logitec */
-+ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Pegatron */
-+ { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Philips */
-+ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Planex */
-+ { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Qcom */
-+ { USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Quanta */
-+ { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Ralink */
-+ { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Samsung */
-+ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Siemens */
-+ { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Sitecom */
-+ { USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* SMC */
-+ { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Sparklan */
-+ { USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* U-Media*/
-+ { USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* ZCOM */
-+ { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Zinwell */
-+ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ /* Zyxel */
-+ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
-+ { 0, }
-+};
-+
-+MODULE_AUTHOR(DRV_PROJECT);
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
-+MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
-+MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
-+MODULE_FIRMWARE(FIRMWARE_RT2870);
-+MODULE_LICENSE("GPL");
-+
-+static struct usb_driver rt2800usb_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = rt2800usb_device_table,
-+ .probe = rt2x00usb_probe,
-+ .disconnect = rt2x00usb_disconnect,
-+ .suspend = rt2x00usb_suspend,
-+ .resume = rt2x00usb_resume,
-+};
-+
-+static int __init rt2800usb_init(void)
-+{
-+ return usb_register(&rt2800usb_driver);
-+}
-+
-+static void __exit rt2800usb_exit(void)
-+{
-+ usb_deregister(&rt2800usb_driver);
-+}
-+
-+module_init(rt2800usb_init);
-+module_exit(rt2800usb_exit);
---- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
-@@ -0,0 +1,1934 @@
-+/*
-+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
-+ <http://rt2x00.serialmonkey.com>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the
-+ Free Software Foundation, Inc.,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+/*
-+ Module: rt2800usb
-+ Abstract: Data structures and registers for the rt2800usb module.
-+ Supported chipsets: RT2800U.
-+ */
-+
-+#ifndef RT2800USB_H
-+#define RT2800USB_H
-+
-+/*
-+ * RF chip defines.
-+ *
-+ * RF2820 2.4G 2T3R
-+ * RF2850 2.4G/5G 2T3R
-+ * RF2720 2.4G 1T2R
-+ * RF2750 2.4G/5G 1T2R
-+ * RF3020 2.4G 1T1R
-+ * RF2020 2.4G B/G
-+ */
-+#define RF2820 0x0001
-+#define RF2850 0x0002
-+#define RF2720 0x0003
-+#define RF2750 0x0004
-+#define RF3020 0x0005
-+#define RF2020 0x0006
-+
-+/*
-+ * RT2870 version
-+ */
-+#define RT2860C_VERSION 0x28600100
-+#define RT2860D_VERSION 0x28600101
-+#define RT2880E_VERSION 0x28720200
-+#define RT2883_VERSION 0x28830300
-+#define RT3070_VERSION 0x30700200
-+
-+/*
-+ * Signal information.
-+ * Defaul offset is required for RSSI <-> dBm conversion.
-+ */
-+#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
-+
-+/*
-+ * Register layout information.
-+ */
-+#define CSR_REG_BASE 0x1000
-+#define CSR_REG_SIZE 0x0800
-+#define EEPROM_BASE 0x0000
-+#define EEPROM_SIZE 0x0110
-+#define BBP_BASE 0x0000
-+#define BBP_SIZE 0x0080
-+#define RF_BASE 0x0004
-+#define RF_SIZE 0x0010
-+
-+/*
-+ * Number of TX queues.
-+ */
-+#define NUM_TX_QUEUES 4
-+
-+/*
-+ * USB registers.
-+ */
-+
-+/*
-+ * HOST-MCU shared memory
-+ */
-+#define HOST_CMD_CSR 0x0404
-+#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
-+
-+/*
-+ * INT_SOURCE_CSR: Interrupt source register.
-+ * Write one to clear corresponding bit.
-+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
-+ */
-+#define INT_SOURCE_CSR 0x0200
-+#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001)
-+#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002)
-+#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004)
-+#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008)
-+#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010)
-+#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020)
-+#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040)
-+#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
-+#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
-+#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200)
-+#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400)
-+#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800)
-+#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000)
-+#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
-+#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000)
-+#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000)
-+#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000)
-+#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000)
-+
-+/*
-+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
-+ */
-+#define INT_MASK_CSR 0x0204
-+#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001)
-+#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002)
-+#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004)
-+#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008)
-+#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010)
-+#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020)
-+#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040)
-+#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
-+#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
-+#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200)
-+#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400)
-+#define INT_MASK_CSR_TBTT FIELD32(0x00000800)
-+#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000)
-+#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
-+#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000)
-+#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000)
-+#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000)
-+#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000)
-+
-+/*
-+ * WPDMA_GLO_CFG
-+ */
-+#define WPDMA_GLO_CFG 0x0208
-+#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001)
-+#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002)
-+#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004)
-+#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008)
-+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
-+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
-+#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080)
-+#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00)
-+#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000)
-+
-+/*
-+ * WPDMA_RST_IDX
-+ */
-+#define WPDMA_RST_IDX 0x020c
-+#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001)
-+#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002)
-+#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004)
-+#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008)
-+#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010)
-+#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020)
-+#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000)
-+
-+/*
-+ * DELAY_INT_CFG
-+ */
-+#define DELAY_INT_CFG 0x0210
-+#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff)
-+#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00)
-+#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000)
-+#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000)
-+#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000)
-+#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000)
-+
-+/*
-+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
-+ * AIFSN0: AC_BE
-+ * AIFSN1: AC_BK
-+ * AIFSN1: AC_VI
-+ * AIFSN1: AC_VO
-+ */
-+#define WMM_AIFSN_CFG 0x0214
-+#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
-+#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0)
-+#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00)
-+#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000)
-+
-+/*
-+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
-+ * CWMIN0: AC_BE
-+ * CWMIN1: AC_BK
-+ * CWMIN1: AC_VI
-+ * CWMIN1: AC_VO
-+ */
-+#define WMM_CWMIN_CFG 0x0218
-+#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
-+#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0)
-+#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00)
-+#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000)
-+
-+/*
-+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
-+ * CWMAX0: AC_BE
-+ * CWMAX1: AC_BK
-+ * CWMAX1: AC_VI
-+ * CWMAX1: AC_VO
-+ */
-+#define WMM_CWMAX_CFG 0x021c
-+#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
-+#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0)
-+#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00)
-+#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
-+
-+/*
-+ * AC_TXOP0: AC_BK/AC_BE TXOP register
-+ * AC0TXOP: AC_BK in unit of 32us
-+ * AC1TXOP: AC_BE in unit of 32us
-+ */
-+#define WMM_TXOP0_CFG 0x0220
-+#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
-+#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
-+
-+/*
-+ * AC_TXOP1: AC_VO/AC_VI TXOP register
-+ * AC2TXOP: AC_VI in unit of 32us
-+ * AC3TXOP: AC_VO in unit of 32us
-+ */
-+#define WMM_TXOP1_CFG 0x0224
-+#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
-+#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
-+
-+/*
-+ * GPIO_CTRL_CFG:
-+ */
-+#define GPIO_CTRL_CFG 0x0228
-+#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001)
-+#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002)
-+#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004)
-+#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008)
-+#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010)
-+#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020)
-+#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040)
-+#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080)
-+#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100)
-+
-+/*
-+ * MCU_CMD_CFG
-+ */
-+#define MCU_CMD_CFG 0x022c
-+
-+/*
-+ * AC_BK register offsets
-+ */
-+#define TX_BASE_PTR0 0x0230
-+#define TX_MAX_CNT0 0x0234
-+#define TX_CTX_IDX0 0x0238
-+#define TX_DTX_IDX0 0x023c
-+
-+/*
-+ * AC_BE register offsets
-+ */
-+#define TX_BASE_PTR1 0x0240
-+#define TX_MAX_CNT1 0x0244
-+#define TX_CTX_IDX1 0x0248
-+#define TX_DTX_IDX1 0x024c
-+
-+/*
-+ * AC_VI register offsets
-+ */
-+#define TX_BASE_PTR2 0x0250
-+#define TX_MAX_CNT2 0x0254
-+#define TX_CTX_IDX2 0x0258
-+#define TX_DTX_IDX2 0x025c
-+
-+/*
-+ * AC_VO register offsets
-+ */
-+#define TX_BASE_PTR3 0x0260
-+#define TX_MAX_CNT3 0x0264
-+#define TX_CTX_IDX3 0x0268
-+#define TX_DTX_IDX3 0x026c
-+
-+/*
-+ * HCCA register offsets
-+ */
-+#define TX_BASE_PTR4 0x0270
-+#define TX_MAX_CNT4 0x0274
-+#define TX_CTX_IDX4 0x0278
-+#define TX_DTX_IDX4 0x027c
-+
-+/*
-+ * MGMT register offsets
-+ */
-+#define TX_BASE_PTR5 0x0280
-+#define TX_MAX_CNT5 0x0284
-+#define TX_CTX_IDX5 0x0288
-+#define TX_DTX_IDX5 0x028c
-+
-+/*
-+ * RX register offsets
-+ */
-+#define RX_BASE_PTR 0x0290
-+#define RX_MAX_CNT 0x0294
-+#define RX_CRX_IDX 0x0298
-+#define RX_DRX_IDX 0x029c
-+
-+/*
-+ * USB_DMA_CFG
-+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
-+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
-+ * PHY_CLEAR: phy watch dog enable.
-+ * TX_CLEAR: Clear USB DMA TX path.
-+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
-+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
-+ * RX_BULK_EN: Enable USB DMA Rx.
-+ * TX_BULK_EN: Enable USB DMA Tx.
-+ * EP_OUT_VALID: OUT endpoint data valid.
-+ * RX_BUSY: USB DMA RX FSM busy.
-+ * TX_BUSY: USB DMA TX FSM busy.
-+ */
-+#define USB_DMA_CFG 0x02a0
-+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
-+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
-+#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
-+#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
-+#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
-+#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
-+#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
-+#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
-+#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
-+#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
-+#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
-+
-+/*
-+ * USB_CYC_CFG
-+ */
-+#define USB_CYC_CFG 0x02a4
-+#define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff)
-+
-+/*
-+ * PBF_SYS_CTRL
-+ * HOST_RAM_WRITE: enable Host program ram write selection
-+ */
-+#define PBF_SYS_CTRL 0x0400
-+#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
-+#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
-+
-+/*
-+ * PBF registers
-+ * Most are for debug. Driver doesn't touch PBF register.
-+ */
-+#define PBF_CFG 0x0408
-+#define PBF_MAX_PCNT 0x040c
-+#define PBF_CTRL 0x0410
-+#define PBF_INT_STA 0x0414
-+#define PBF_INT_ENA 0x0418
-+
-+/*
-+ * BCN_OFFSET0:
-+ */
-+#define BCN_OFFSET0 0x042c
-+#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff)
-+#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00)
-+#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000)
-+#define BCN_OFFSET0_BCN3 FIELD32(0xff000000)
-+
-+/*
-+ * BCN_OFFSET1:
-+ */
-+#define BCN_OFFSET1 0x0430
-+#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff)
-+#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00)
-+#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000)
-+#define BCN_OFFSET1_BCN7 FIELD32(0xff000000)
-+
-+/*
-+ * PBF registers
-+ * Most are for debug. Driver doesn't touch PBF register.
-+ */
-+#define TXRXQ_PCNT 0x0438
-+#define PBF_DBG 0x043c
-+
-+/*
-+ * RF registers
-+ */
-+#define RF_CSR_CFG 0x0500
-+#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
-+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
-+#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
-+#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
-+
-+/*
-+ * MAC Control/Status Registers(CSR).
-+ * Some values are set in TU, whereas 1 TU == 1024 us.
-+ */
-+
-+/*
-+ * MAC_CSR0: ASIC revision number.
-+ * ASIC_REV: 0
-+ * ASIC_VER: 2870
-+ */
-+#define MAC_CSR0 0x1000
-+#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff)
-+#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000)
-+
-+/*
-+ * MAC_SYS_CTRL:
-+ */
-+#define MAC_SYS_CTRL 0x1004
-+#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001)
-+#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002)
-+#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004)
-+#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008)
-+#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010)
-+#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020)
-+#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040)
-+#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080)
-+
-+/*
-+ * MAC_ADDR_DW0: STA MAC register 0
-+ */
-+#define MAC_ADDR_DW0 0x1008
-+#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff)
-+#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00)
-+#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000)
-+#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000)
-+
-+/*
-+ * MAC_ADDR_DW1: STA MAC register 1
-+ * UNICAST_TO_ME_MASK:
-+ * Used to mask off bits from byte 5 of the MAC address
-+ * to determine the UNICAST_TO_ME bit for RX frames.
-+ * The full mask is complemented by BSS_ID_MASK:
-+ * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
-+ */
-+#define MAC_ADDR_DW1 0x100c
-+#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff)
-+#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00)
-+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
-+
-+/*
-+ * MAC_BSSID_DW0: BSSID register 0
-+ */
-+#define MAC_BSSID_DW0 0x1010
-+#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff)
-+#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00)
-+#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000)
-+#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000)
-+
-+/*
-+ * MAC_BSSID_DW1: BSSID register 1
-+ * BSS_ID_MASK:
-+ * 0: 1-BSSID mode (BSS index = 0)
-+ * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
-+ * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
-+ * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
-+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
-+ * BSSID. This will make sure that those bits will be ignored
-+ * when determining the MY_BSS of RX frames.
-+ */
-+#define MAC_BSSID_DW1 0x1014
-+#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff)
-+#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00)
-+#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000)
-+#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000)
-+
-+/*
-+ * MAX_LEN_CFG: Maximum frame length register.
-+ * MAX_MPDU: rt2860b max 16k bytes
-+ * MAX_PSDU: Maximum PSDU length
-+ * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-+ */
-+#define MAX_LEN_CFG 0x1018
-+#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff)
-+#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000)
-+#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000)
-+#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000)
-+
-+/*
-+ * BBP_CSR_CFG: BBP serial control register
-+ * VALUE: Register value to program into BBP
-+ * REG_NUM: Selected BBP register
-+ * READ_CONTROL: 0 write BBP, 1 read BBP
-+ * BUSY: ASIC is busy executing BBP commands
-+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
-+ * BBP_RW_MODE: 0 serial, 1 paralell
-+ */
-+#define BBP_CSR_CFG 0x101c
-+#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
-+#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00)
-+#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000)
-+#define BBP_CSR_CFG_BUSY FIELD32(0x00020000)
-+#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000)
-+#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000)
-+
-+/*
-+ * RF_CSR_CFG0: RF control register
-+ * REGID_AND_VALUE: Register value to program into RF
-+ * BITWIDTH: Selected RF register
-+ * STANDBYMODE: 0 high when standby, 1 low when standby
-+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
-+ * BUSY: ASIC is busy executing RF commands
-+ */
-+#define RF_CSR_CFG0 0x1020
-+#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff)
-+#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000)
-+#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff)
-+#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000)
-+#define RF_CSR_CFG0_SEL FIELD32(0x40000000)
-+#define RF_CSR_CFG0_BUSY FIELD32(0x80000000)
-+
-+/*
-+ * RF_CSR_CFG1: RF control register
-+ * REGID_AND_VALUE: Register value to program into RF
-+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
-+ * 0: 3 system clock cycle (37.5usec)
-+ * 1: 5 system clock cycle (62.5usec)
-+ */
-+#define RF_CSR_CFG1 0x1024
-+#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff)
-+#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000)
-+
-+/*
-+ * RF_CSR_CFG2: RF control register
-+ * VALUE: Register value to program into RF
-+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
-+ * 0: 3 system clock cycle (37.5usec)
-+ * 1: 5 system clock cycle (62.5usec)
-+ */
-+#define RF_CSR_CFG2 0x1028
-+#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff)
-+
-+/*
-+ * LED_CFG: LED control
-+ * color LED's:
-+ * 0: off
-+ * 1: blinking upon TX2
-+ * 2: periodic slow blinking
-+ * 3: always on
-+ * LED polarity:
-+ * 0: active low
-+ * 1: active high
-+ */
-+#define LED_CFG 0x102c
-+#define LED_CFG_ON_PERIOD FIELD32(0x000000ff)
-+#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00)
-+#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000)
-+#define LED_CFG_R_LED_MODE FIELD32(0x03000000)
-+#define LED_CFG_G_LED_MODE FIELD32(0x0c000000)
-+#define LED_CFG_Y_LED_MODE FIELD32(0x30000000)
-+#define LED_CFG_LED_POLAR FIELD32(0x40000000)
-+
-+/*
-+ * XIFS_TIME_CFG: MAC timing
-+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
-+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
-+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
-+ * when MAC doesn't reference BBP signal BBRXEND
-+ * EIFS: unit 1us
-+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
-+ *
-+ */
-+#define XIFS_TIME_CFG 0x1100
-+#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff)
-+#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00)
-+#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000)
-+#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000)
-+#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000)
-+
-+/*
-+ * BKOFF_SLOT_CFG:
-+ */
-+#define BKOFF_SLOT_CFG 0x1104
-+#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff)
-+#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00)
-+
-+/*
-+ * NAV_TIME_CFG:
-+ */
-+#define NAV_TIME_CFG 0x1108
-+#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff)
-+#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00)
-+#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000)
-+#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000)
-+
-+/*
-+ * CH_TIME_CFG: count as channel busy
-+ */
-+#define CH_TIME_CFG 0x110c
-+
-+/*
-+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
-+ */
-+#define PBF_LIFE_TIMER 0x1110
-+
-+/*
-+ * BCN_TIME_CFG:
-+ * BEACON_INTERVAL: in unit of 1/16 TU
-+ * TSF_TICKING: Enable TSF auto counting
-+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
-+ * BEACON_GEN: Enable beacon generator
-+ */
-+#define BCN_TIME_CFG 0x1114
-+#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff)
-+#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000)
-+#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000)
-+#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000)
-+#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000)
-+#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)
-+
-+/*
-+ * TBTT_SYNC_CFG:
-+ */
-+#define TBTT_SYNC_CFG 0x1118
-+
-+/*
-+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
-+ */
-+#define TSF_TIMER_DW0 0x111c
-+#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff)
-+
-+/*
-+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
-+ */
-+#define TSF_TIMER_DW1 0x1120
-+#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff)
-+
-+/*
-+ * TBTT_TIMER: TImer remains till next TBTT, read-only
-+ */
-+#define TBTT_TIMER 0x1124
-+
-+/*
-+ * INT_TIMER_CFG:
-+ */
-+#define INT_TIMER_CFG 0x1128
-+
-+/*
-+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
-+ */
-+#define INT_TIMER_EN 0x112c
-+
-+/*
-+ * CH_IDLE_STA: channel idle time
-+ */
-+#define CH_IDLE_STA 0x1130
-+
-+/*
-+ * CH_BUSY_STA: channel busy time
-+ */
-+#define CH_BUSY_STA 0x1134
-+
-+/*
-+ * MAC_STATUS_CFG:
-+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
-+ * if 1 or higher one of the 2 registers is busy.
-+ */
-+#define MAC_STATUS_CFG 0x1200
-+#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
-+
-+/*
-+ * PWR_PIN_CFG:
-+ */
-+#define PWR_PIN_CFG 0x1204
-+
-+/*
-+ * AUTOWAKEUP_CFG: Manual power control / status register
-+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
-+ * AUTOWAKE: 0:sleep, 1:awake
-+ */
-+#define AUTOWAKEUP_CFG 0x1208
-+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff)
-+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
-+#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
-+
-+/*
-+ * EDCA_AC0_CFG:
-+ */
-+#define EDCA_AC0_CFG 0x1300
-+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC1_CFG:
-+ */
-+#define EDCA_AC1_CFG 0x1304
-+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC2_CFG:
-+ */
-+#define EDCA_AC2_CFG 0x1308
-+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_AC3_CFG:
-+ */
-+#define EDCA_AC3_CFG 0x130c
-+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
-+#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
-+#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
-+#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
-+
-+/*
-+ * EDCA_TID_AC_MAP:
-+ */
-+#define EDCA_TID_AC_MAP 0x1310
-+
-+/*
-+ * TX_PWR_CFG_0:
-+ */
-+#define TX_PWR_CFG_0 0x1314
-+#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f)
-+#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0)
-+#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00)
-+#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000)
-+#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000)
-+#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
-+#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
-+#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_1:
-+ */
-+#define TX_PWR_CFG_1 0x1318
-+#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f)
-+#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0)
-+#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00)
-+#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000)
-+#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_2:
-+ */
-+#define TX_PWR_CFG_2 0x131c
-+#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_3:
-+ */
-+#define TX_PWR_CFG_3 0x1320
-+#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000)
-+#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000)
-+#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000)
-+#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000)
-+#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000)
-+
-+/*
-+ * TX_PWR_CFG_4:
-+ */
-+#define TX_PWR_CFG_4 0x1324
-+#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f)
-+#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0)
-+#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
-+#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
-+
-+/*
-+ * TX_PIN_CFG:
-+ */
-+#define TX_PIN_CFG 0x1328
-+#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
-+#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
-+#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
-+#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008)
-+#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010)
-+#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020)
-+#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040)
-+#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080)
-+#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100)
-+#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200)
-+#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400)
-+#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800)
-+#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000)
-+#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000)
-+#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000)
-+#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000)
-+#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000)
-+#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
-+#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
-+#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
-+
-+/*
-+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
-+ */
-+#define TX_BAND_CFG 0x132c
-+#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001)
-+#define TX_BAND_CFG_A FIELD32(0x00000002)
-+#define TX_BAND_CFG_BG FIELD32(0x00000004)
-+
-+/*
-+ * TX_SW_CFG0:
-+ */
-+#define TX_SW_CFG0 0x1330
-+
-+/*
-+ * TX_SW_CFG1:
-+ */
-+#define TX_SW_CFG1 0x1334
-+
-+/*
-+ * TX_SW_CFG2:
-+ */
-+#define TX_SW_CFG2 0x1338
-+
-+/*
-+ * TXOP_THRES_CFG:
-+ */
-+#define TXOP_THRES_CFG 0x133c
-+
-+/*
-+ * TXOP_CTRL_CFG:
-+ */
-+#define TXOP_CTRL_CFG 0x1340
-+
-+/*
-+ * TX_RTS_CFG:
-+ * RTS_THRES: unit:byte
-+ * RTS_FBK_EN: enable rts rate fallback
-+ */
-+#define TX_RTS_CFG 0x1344
-+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
-+#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00)
-+#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000)
-+
-+/*
-+ * TX_TIMEOUT_CFG:
-+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
-+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
-+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
-+ * it is recommended that:
-+ * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
-+ */
-+#define TX_TIMEOUT_CFG 0x1348
-+#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0)
-+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00)
-+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000)
-+
-+/*
-+ * TX_RTY_CFG:
-+ * SHORT_RTY_LIMIT: short retry limit
-+ * LONG_RTY_LIMIT: long retry limit
-+ * LONG_RTY_THRE: Long retry threshoold
-+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
-+ * 0:expired by retry limit, 1: expired by mpdu life timer
-+ * AGG_RTY_MODE: Aggregate MPDU retry mode
-+ * 0:expired by retry limit, 1: expired by mpdu life timer
-+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
-+ */
-+#define TX_RTY_CFG 0x134c
-+#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff)
-+#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00)
-+#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000)
-+#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000)
-+#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000)
-+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000)
-+
-+/*
-+ * TX_LINK_CFG:
-+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
-+ * MFB_ENABLE: TX apply remote MFB 1:enable
-+ * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable
-+ * 0: not apply remote remote unsolicit (MFS=7)
-+ * TX_MRQ_EN: MCS request TX enable
-+ * TX_RDG_EN: RDG TX enable
-+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
-+ * REMOTE_MFB: remote MCS feedback
-+ * REMOTE_MFS: remote MCS feedback sequence number
-+ */
-+#define TX_LINK_CFG 0x1350
-+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
-+#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100)
-+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200)
-+#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400)
-+#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800)
-+#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000)
-+#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000)
-+#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000)
-+
-+/*
-+ * HT_FBK_CFG0:
-+ */
-+#define HT_FBK_CFG0 0x1354
-+#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f)
-+#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0)
-+#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00)
-+#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000)
-+#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000)
-+#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000)
-+#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000)
-+#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000)
-+
-+/*
-+ * HT_FBK_CFG1:
-+ */
-+#define HT_FBK_CFG1 0x1358
-+#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f)
-+#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0)
-+#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00)
-+#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000)
-+#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000)
-+#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000)
-+#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000)
-+#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000)
-+
-+/*
-+ * LG_FBK_CFG0:
-+ */
-+#define LG_FBK_CFG0 0x135c
-+#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f)
-+#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0)
-+#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00)
-+#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000)
-+#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000)
-+#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000)
-+#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000)
-+#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000)
-+
-+/*
-+ * LG_FBK_CFG1:
-+ */
-+#define LG_FBK_CFG1 0x1360
-+#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f)
-+#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0)
-+#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00)
-+#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000)
-+
-+/*
-+ * CCK_PROT_CFG: CCK Protection
-+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
-+ * PROTECT_CTRL: Protection control frame type for CCK TX
-+ * 0:none, 1:RTS/CTS, 2:CTS-to-self
-+ * PROTECT_NAV: TXOP protection type for CCK TX
-+ * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect
-+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
-+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
-+ * RTS_TH_EN: RTS threshold enable on CCK TX
-+ */
-+#define CCK_PROT_CFG 0x1364
-+#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * OFDM_PROT_CFG: OFDM Protection
-+ */
-+#define OFDM_PROT_CFG 0x1368
-+#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * MM20_PROT_CFG: MM20 Protection
-+ */
-+#define MM20_PROT_CFG 0x136c
-+#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * MM40_PROT_CFG: MM40 Protection
-+ */
-+#define MM40_PROT_CFG 0x1370
-+#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * GF20_PROT_CFG: GF20 Protection
-+ */
-+#define GF20_PROT_CFG 0x1374
-+#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * GF40_PROT_CFG: GF40 Protection
-+ */
-+#define GF40_PROT_CFG 0x1378
-+#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
-+#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
-+#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
-+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
-+#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
-+
-+/*
-+ * EXP_CTS_TIME:
-+ */
-+#define EXP_CTS_TIME 0x137c
-+
-+/*
-+ * EXP_ACK_TIME:
-+ */
-+#define EXP_ACK_TIME 0x1380
-+
-+/*
-+ * RX_FILTER_CFG: RX configuration register.
-+ */
-+#define RX_FILTER_CFG 0x1400
-+#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001)
-+#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002)
-+#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004)
-+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008)
-+#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010)
-+#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020)
-+#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040)
-+#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080)
-+#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100)
-+#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200)
-+#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400)
-+#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800)
-+#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000)
-+#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000)
-+#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000)
-+#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000)
-+#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000)
-+
-+/*
-+ * AUTO_RSP_CFG:
-+ * AUTORESPONDER: 0: disable, 1: enable
-+ * BAC_ACK_POLICY: 0:long, 1:short preamble
-+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
-+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
-+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
-+ * DUAL_CTS_EN: Power bit value in control frame
-+ * ACK_CTS_PSM_BIT:Power bit value in control frame
-+ */
-+#define AUTO_RSP_CFG 0x1404
-+#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001)
-+#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002)
-+#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004)
-+#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008)
-+#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010)
-+#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040)
-+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080)
-+
-+/*
-+ * LEGACY_BASIC_RATE:
-+ */
-+#define LEGACY_BASIC_RATE 0x1408
-+
-+/*
-+ * HT_BASIC_RATE:
-+ */
-+#define HT_BASIC_RATE 0x140c
-+
-+/*
-+ * HT_CTRL_CFG:
-+ */
-+#define HT_CTRL_CFG 0x1410
-+
-+/*
-+ * SIFS_COST_CFG:
-+ */
-+#define SIFS_COST_CFG 0x1414
-+
-+/*
-+ * RX_PARSER_CFG:
-+ * Set NAV for all received frames
-+ */
-+#define RX_PARSER_CFG 0x1418
-+
-+/*
-+ * TX_SEC_CNT0:
-+ */
-+#define TX_SEC_CNT0 0x1500
-+
-+/*
-+ * RX_SEC_CNT0:
-+ */
-+#define RX_SEC_CNT0 0x1504
-+
-+/*
-+ * CCMP_FC_MUTE:
-+ */
-+#define CCMP_FC_MUTE 0x1508
-+
-+/*
-+ * TXOP_HLDR_ADDR0:
-+ */
-+#define TXOP_HLDR_ADDR0 0x1600
-+
-+/*
-+ * TXOP_HLDR_ADDR1:
-+ */
-+#define TXOP_HLDR_ADDR1 0x1604
-+
-+/*
-+ * TXOP_HLDR_ET:
-+ */
-+#define TXOP_HLDR_ET 0x1608
-+
-+/*
-+ * QOS_CFPOLL_RA_DW0:
-+ */
-+#define QOS_CFPOLL_RA_DW0 0x160c
-+
-+/*
-+ * QOS_CFPOLL_RA_DW1:
-+ */
-+#define QOS_CFPOLL_RA_DW1 0x1610
-+
-+/*
-+ * QOS_CFPOLL_QC:
-+ */
-+#define QOS_CFPOLL_QC 0x1614
-+
-+/*
-+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
-+ */
-+#define RX_STA_CNT0 0x1700
-+#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff)
-+#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000)
-+
-+/*
-+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
-+ */
-+#define RX_STA_CNT1 0x1704
-+#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff)
-+#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000)
-+
-+/*
-+ * RX_STA_CNT2:
-+ */
-+#define RX_STA_CNT2 0x1708
-+#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff)
-+#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT0: TX Beacon count
-+ */
-+#define TX_STA_CNT0 0x170c
-+#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff)
-+#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT1: TX tx count
-+ */
-+#define TX_STA_CNT1 0x1710
-+#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff)
-+#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_CNT2: TX tx count
-+ */
-+#define TX_STA_CNT2 0x1714
-+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff)
-+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_STA_FIFO: TX Result for specific PID status fifo register
-+ */
-+#define TX_STA_FIFO 0x1718
-+#define TX_STA_FIFO_VALID FIELD32(0x00000001)
-+#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e)
-+#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020)
-+#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040)
-+#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080)
-+#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
-+#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT: Debug counter
-+ */
-+#define TX_AGG_CNT 0x171c
-+#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT0:
-+ */
-+#define TX_AGG_CNT0 0x1720
-+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT1:
-+ */
-+#define TX_AGG_CNT1 0x1724
-+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT2:
-+ */
-+#define TX_AGG_CNT2 0x1728
-+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT3:
-+ */
-+#define TX_AGG_CNT3 0x172c
-+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT4:
-+ */
-+#define TX_AGG_CNT4 0x1730
-+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT5:
-+ */
-+#define TX_AGG_CNT5 0x1734
-+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT6:
-+ */
-+#define TX_AGG_CNT6 0x1738
-+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * TX_AGG_CNT7:
-+ */
-+#define TX_AGG_CNT7 0x173c
-+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff)
-+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000)
-+
-+/*
-+ * MPDU_DENSITY_CNT:
-+ * TX_ZERO_DEL: TX zero length delimiter count
-+ * RX_ZERO_DEL: RX zero length delimiter count
-+ */
-+#define MPDU_DENSITY_CNT 0x1740
-+#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff)
-+#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000)
-+
-+/*
-+ * Security key table memory.
-+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
-+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
-+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
-+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
-+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
-+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
-+ */
-+#define MAC_WCID_BASE 0x1800
-+#define PAIRWISE_KEY_TABLE_BASE 0x4000
-+#define MAC_IVEIV_TABLE_BASE 0x6000
-+#define MAC_WCID_ATTRIBUTE_BASE 0x6800
-+#define SHARED_KEY_TABLE_BASE 0x6c00
-+#define SHARED_KEY_MODE_BASE 0x7000
-+
-+#define MAC_WCID_ENTRY(__idx) \
-+ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
-+#define PAIRWISE_KEY_ENTRY(__idx) \
-+ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-+#define MAC_IVEIV_ENTRY(__idx) \
-+ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
-+#define MAC_WCID_ATTR_ENTRY(__idx) \
-+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
-+#define SHARED_KEY_ENTRY(__idx) \
-+ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-+#define SHARED_KEY_MODE_ENTRY(__idx) \
-+ ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
-+
-+struct mac_wcid_entry {
-+ u8 mac[6];
-+ u8 reserved[2];
-+} __attribute__ ((packed));
-+
-+struct hw_key_entry {
-+ u8 key[16];
-+ u8 tx_mic[8];
-+ u8 rx_mic[8];
-+} __attribute__ ((packed));
-+
-+struct mac_iveiv_entry {
-+ u8 iv[8];
-+} __attribute__ ((packed));
-+
-+/*
-+ * MAC_WCID_ATTRIBUTE:
-+ */
-+#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001)
-+#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
-+#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
-+#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
-+
-+/*
-+ * SHARED_KEY_MODE:
-+ */
-+#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007)
-+#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070)
-+#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700)
-+#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000)
-+#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000)
-+#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000)
-+#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000)
-+#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000)
-+
-+/*
-+ * HOST-MCU communication
-+ */
-+
-+/*
-+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
-+ */
-+#define H2M_MAILBOX_CSR 0x7010
-+#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
-+#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
-+#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
-+#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
-+
-+/*
-+ * H2M_MAILBOX_CID:
-+ */
-+#define H2M_MAILBOX_CID 0x7014
-+
-+/*
-+ * H2M_MAILBOX_STATUS:
-+ */
-+#define H2M_MAILBOX_STATUS 0x701c
-+
-+/*
-+ * H2M_INT_SRC:
-+ */
-+#define H2M_INT_SRC 0x7024
-+
-+/*
-+ * H2M_BBP_AGENT:
-+ */
-+#define H2M_BBP_AGENT 0x7028
-+
-+/*
-+ * MCU_LEDCS: LED control for MCU Mailbox.
-+ */
-+#define MCU_LEDCS_LED_MODE FIELD8(0x1f)
-+#define MCU_LEDCS_POLARITY FIELD8(0x01)
-+
-+/*
-+ * HW_CS_CTS_BASE:
-+ * Carrier-sense CTS frame base address.
-+ * It's where mac stores carrier-sense frame for carrier-sense function.
-+ */
-+#define HW_CS_CTS_BASE 0x7700
-+
-+/*
-+ * HW_DFS_CTS_BASE:
-+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
-+ */
-+#define HW_DFS_CTS_BASE 0x7780
-+
-+/*
-+ * TXRX control registers - base address 0x3000
-+ */
-+
-+/*
-+ * TXRX_CSR1:
-+ * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
-+ */
-+#define TXRX_CSR1 0x77d0
-+
-+/*
-+ * HW_DEBUG_SETTING_BASE:
-+ * since NULL frame won't be that long (256 byte)
-+ * We steal 16 tail bytes to save debugging settings
-+ */
-+#define HW_DEBUG_SETTING_BASE 0x77f0
-+#define HW_DEBUG_SETTING_BASE2 0x7770
-+
-+/*
-+ * HW_BEACON_BASE
-+ * In order to support maximum 8 MBSS and its maximum length
-+ * is 512 bytes for each beacon
-+ * Three section discontinue memory segments will be used.
-+ * 1. The original region for BCN 0~3
-+ * 2. Extract memory from FCE table for BCN 4~5
-+ * 3. Extract memory from Pair-wise key table for BCN 6~7
-+ * It occupied those memory of wcid 238~253 for BCN 6
-+ * and wcid 222~237 for BCN 7
-+ *
-+ * IMPORTANT NOTE: Not sure why legacy driver does this,
-+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
-+ */
-+#define HW_BEACON_BASE0 0x7800
-+#define HW_BEACON_BASE1 0x7a00
-+#define HW_BEACON_BASE2 0x7c00
-+#define HW_BEACON_BASE3 0x7e00
-+#define HW_BEACON_BASE4 0x7200
-+#define HW_BEACON_BASE5 0x7400
-+#define HW_BEACON_BASE6 0x5dc0
-+#define HW_BEACON_BASE7 0x5bc0
-+
-+#define HW_BEACON_OFFSET(__index) \
-+ ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-+ (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-+ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
-+
-+/*
-+ * 8051 firmware image.
-+ */
-+#define FIRMWARE_RT2870 "rt2870.bin"
-+#define FIRMWARE_IMAGE_BASE 0x3000
-+
-+/*
-+ * BBP registers.
-+ * The wordsize of the BBP is 8 bits.
-+ */
-+
-+/*
-+ * BBP 1: TX Antenna
-+ */
-+#define BBP1_TX_POWER FIELD8(0x07)
-+#define BBP1_TX_ANTENNA FIELD8(0x18)
-+
-+/*
-+ * BBP 3: RX Antenna
-+ */
-+#define BBP3_RX_ANTENNA FIELD8(0x18)
-+#define BBP3_HT40_PLUS FIELD8(0x20)
-+
-+/*
-+ * BBP 4: Bandwidth
-+ */
-+#define BBP4_TX_BF FIELD8(0x01)
-+#define BBP4_BANDWIDTH FIELD8(0x18)
-+
-+/*
-+ * RFCSR registers
-+ * The wordsize of the RFCSR is 8 bits.
-+ */
-+
-+/*
-+ * RFCSR 6:
-+ */
-+#define RFCSR6_R FIELD8(0x03)
-+
-+/*
-+ * RFCSR 7:
-+ */
-+#define RFCSR7_RF_TUNING FIELD8(0x01)
-+
-+/*
-+ * RFCSR 12:
-+ */
-+#define RFCSR12_TX_POWER FIELD8(0x1f)
-+
-+/*
-+ * RFCSR 22:
-+ */
-+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
-+
-+/*
-+ * RFCSR 23:
-+ */
-+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
-+
-+/*
-+ * RFCSR 30:
-+ */
-+#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
-+
-+/*
-+ * RF registers
-+ */
-+
-+/*
-+ * RF 2
-+ */
-+#define RF2_ANTENNA_RX2 FIELD32(0x00000040)
-+#define RF2_ANTENNA_TX1 FIELD32(0x00004000)
-+#define RF2_ANTENNA_RX1 FIELD32(0x00020000)
-+
-+/*
-+ * RF 3
-+ */
-+#define RF3_TXPOWER_G FIELD32(0x00003e00)
-+#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200)
-+#define RF3_TXPOWER_A FIELD32(0x00003c00)
-+
-+/*
-+ * RF 4
-+ */
-+#define RF4_TXPOWER_G FIELD32(0x000007c0)
-+#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040)
-+#define RF4_TXPOWER_A FIELD32(0x00000780)
-+#define RF4_FREQ_OFFSET FIELD32(0x001f8000)
-+#define RF4_HT40 FIELD32(0x00200000)
-+
-+/*
-+ * EEPROM content.
-+ * The wordsize of the EEPROM is 16 bits.
-+ */
-+
-+/*
-+ * EEPROM Version
-+ */
-+#define EEPROM_VERSION 0x0001
-+#define EEPROM_VERSION_FAE FIELD16(0x00ff)
-+#define EEPROM_VERSION_VERSION FIELD16(0xff00)
-+
-+/*
-+ * HW MAC address.
-+ */
-+#define EEPROM_MAC_ADDR_0 0x0002
-+#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
-+#define EEPROM_MAC_ADDR_1 0x0003
-+#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
-+#define EEPROM_MAC_ADDR_2 0x0004
-+#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
-+#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM ANTENNA config
-+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
-+ * TXPATH: 1: 1T, 2: 2T
-+ */
-+#define EEPROM_ANTENNA 0x001a
-+#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f)
-+#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0)
-+#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00)
-+
-+/*
-+ * EEPROM NIC config
-+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
-+ */
-+#define EEPROM_NIC 0x001b
-+#define EEPROM_NIC_HW_RADIO FIELD16(0x0001)
-+#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002)
-+#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004)
-+#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008)
-+#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010)
-+#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020)
-+#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040)
-+#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
-+#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
-+#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
-+
-+/*
-+ * EEPROM frequency
-+ */
-+#define EEPROM_FREQ 0x001d
-+#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
-+#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
-+#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
-+
-+/*
-+ * EEPROM LED
-+ * POLARITY_RDY_G: Polarity RDY_G setting.
-+ * POLARITY_RDY_A: Polarity RDY_A setting.
-+ * POLARITY_ACT: Polarity ACT setting.
-+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
-+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
-+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
-+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
-+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
-+ * LED_MODE: Led mode.
-+ */
-+#define EEPROM_LED1 0x001e
-+#define EEPROM_LED2 0x001f
-+#define EEPROM_LED3 0x0020
-+#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
-+#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
-+#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
-+#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
-+#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
-+#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
-+#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
-+#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
-+#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
-+
-+/*
-+ * EEPROM LNA
-+ */
-+#define EEPROM_LNA 0x0022
-+#define EEPROM_LNA_BG FIELD16(0x00ff)
-+#define EEPROM_LNA_A0 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI BG offset
-+ */
-+#define EEPROM_RSSI_BG 0x0023
-+#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
-+#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI BG2 offset
-+ */
-+#define EEPROM_RSSI_BG2 0x0024
-+#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
-+#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI A offset
-+ */
-+#define EEPROM_RSSI_A 0x0025
-+#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
-+#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM RSSI A2 offset
-+ */
-+#define EEPROM_RSSI_A2 0x0026
-+#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
-+#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
-+ * This is delta in 40MHZ.
-+ * VALUE: Tx Power dalta value (MAX=4)
-+ * TYPE: 1: Plus the delta value, 0: minus the delta value
-+ * TXPOWER: Enable:
-+ */
-+#define EEPROM_TXPOWER_DELTA 0x0028
-+#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f)
-+#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040)
-+#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080)
-+
-+/*
-+ * EEPROM TXPOWER 802.11BG
-+ */
-+#define EEPROM_TXPOWER_BG1 0x0029
-+#define EEPROM_TXPOWER_BG2 0x0030
-+#define EEPROM_TXPOWER_BG_SIZE 7
-+#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
-+#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXPOWER 802.11A
-+ */
-+#define EEPROM_TXPOWER_A1 0x003c
-+#define EEPROM_TXPOWER_A2 0x0053
-+#define EEPROM_TXPOWER_A_SIZE 6
-+#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
-+#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
-+
-+/*
-+ * EEPROM TXpower byrate: 20MHZ power
-+ */
-+#define EEPROM_TXPOWER_BYRATE 0x006f
-+
-+/*
-+ * EEPROM BBP.
-+ */
-+#define EEPROM_BBP_START 0x0078
-+#define EEPROM_BBP_SIZE 16
-+#define EEPROM_BBP_VALUE FIELD16(0x00ff)
-+#define EEPROM_BBP_REG_ID FIELD16(0xff00)
-+
-+/*
-+ * MCU mailbox commands.
-+ */
-+#define MCU_SLEEP 0x30
-+#define MCU_WAKEUP 0x31
-+#define MCU_RADIO_OFF 0x35
-+#define MCU_LED 0x50
-+#define MCU_LED_STRENGTH 0x51
-+#define MCU_LED_1 0x52
-+#define MCU_LED_2 0x53
-+#define MCU_LED_3 0x54
-+#define MCU_RADAR 0x60
-+#define MCU_BOOT_SIGNAL 0x72
-+#define MCU_BBP_SIGNAL 0x80
-+
-+/*
-+ * DMA descriptor defines.
-+ */
-+#define TXD_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) )
-+#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) )
-+#define RXD_DESC_SIZE ( 1 * sizeof(__le32) )
-+#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) )
-+
-+/*
-+ * TX descriptor format for TX, PRIO and Beacon Ring.
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define TXD_W0_SD_PTR0 FIELD32(0xffffffff)
-+
-+/*
-+ * Word1
-+ */
-+#define TXD_W1_SD_LEN1 FIELD32(0x00003fff)
-+#define TXD_W1_LAST_SEC1 FIELD32(0x00004000)
-+#define TXD_W1_BURST FIELD32(0x00008000)
-+#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000)
-+#define TXD_W1_LAST_SEC0 FIELD32(0x40000000)
-+#define TXD_W1_DMA_DONE FIELD32(0x80000000)
-+
-+/*
-+ * Word2
-+ */
-+#define TXD_W2_SD_PTR1 FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
-+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
-+ * 0:MGMT, 1:HCCA 2:EDCA
-+ */
-+#define TXD_W3_WIV FIELD32(0x01000000)
-+#define TXD_W3_QSEL FIELD32(0x06000000)
-+#define TXD_W3_TCO FIELD32(0x20000000)
-+#define TXD_W3_UCO FIELD32(0x40000000)
-+#define TXD_W3_ICO FIELD32(0x80000000)
-+
-+/*
-+ * TX Info structure
-+ */
-+
-+/*
-+ * Word0
-+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
-+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
-+ * 0:MGMT, 1:HCCA 2:EDCA
-+ * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid
-+ * DMA_TX_BURST: used ONLY in USB bulk Aggregation.
-+ * Force USB DMA transmit frame from current selected endpoint
-+ */
-+#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff)
-+#define TXINFO_W0_WIV FIELD32(0x01000000)
-+#define TXINFO_W0_QSEL FIELD32(0x06000000)
-+#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000)
-+#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000)
-+#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000)
-+
-+/*
-+ * TX WI structure
-+ */
-+
-+/*
-+ * Word0
-+ * FRAG: 1 To inform TKIP engine this is a fragment.
-+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
-+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
-+ * BW: Channel bandwidth 20MHz or 40 MHz
-+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
-+ */
-+#define TXWI_W0_FRAG FIELD32(0x00000001)
-+#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
-+#define TXWI_W0_CF_ACK FIELD32(0x00000004)
-+#define TXWI_W0_TS FIELD32(0x00000008)
-+#define TXWI_W0_AMPDU FIELD32(0x00000010)
-+#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0)
-+#define TXWI_W0_TX_OP FIELD32(0x00000300)
-+#define TXWI_W0_MCS FIELD32(0x007f0000)
-+#define TXWI_W0_BW FIELD32(0x00800000)
-+#define TXWI_W0_SHORT_GI FIELD32(0x01000000)
-+#define TXWI_W0_STBC FIELD32(0x06000000)
-+#define TXWI_W0_IFS FIELD32(0x08000000)
-+#define TXWI_W0_PHYMODE FIELD32(0xc0000000)
-+
-+/*
-+ * Word1
-+ */
-+#define TXWI_W1_ACK FIELD32(0x00000001)
-+#define TXWI_W1_NSEQ FIELD32(0x00000002)
-+#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc)
-+#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00)
-+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
-+#define TXWI_W1_PACKETID FIELD32(0xf0000000)
-+
-+/*
-+ * Word2
-+ */
-+#define TXWI_W2_IV FIELD32(0xffffffff)
-+
-+/*
-+ * Word3
-+ */
-+#define TXWI_W3_EIV FIELD32(0xffffffff)
-+
-+/*
-+ * RX descriptor format for RX Ring.
-+ */
-+
-+/*
-+ * Word0
-+ * UNICAST_TO_ME: This RX frame is unicast to me.
-+ * MULTICAST: This is a multicast frame.
-+ * BROADCAST: This is a broadcast frame.
-+ * MY_BSS: this frame belongs to the same BSSID.
-+ * CRC_ERROR: CRC error.
-+ * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid.
-+ * AMSDU: rx with 802.3 header, not 802.11 header.
-+ */
-+
-+#define RXD_W0_BA FIELD32(0x00000001)
-+#define RXD_W0_DATA FIELD32(0x00000002)
-+#define RXD_W0_NULLDATA FIELD32(0x00000004)
-+#define RXD_W0_FRAG FIELD32(0x00000008)
-+#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010)
-+#define RXD_W0_MULTICAST FIELD32(0x00000020)
-+#define RXD_W0_BROADCAST FIELD32(0x00000040)
-+#define RXD_W0_MY_BSS FIELD32(0x00000080)
-+#define RXD_W0_CRC_ERROR FIELD32(0x00000100)
-+#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600)
-+#define RXD_W0_AMSDU FIELD32(0x00000800)
-+#define RXD_W0_HTC FIELD32(0x00001000)
-+#define RXD_W0_RSSI FIELD32(0x00002000)
-+#define RXD_W0_L2PAD FIELD32(0x00004000)
-+#define RXD_W0_AMPDU FIELD32(0x00008000)
-+#define RXD_W0_DECRYPTED FIELD32(0x00010000)
-+#define RXD_W0_PLCP_RSSI FIELD32(0x00020000)
-+#define RXD_W0_CIPHER_ALG FIELD32(0x00040000)
-+#define RXD_W0_LAST_AMSDU FIELD32(0x00080000)
-+#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000)
-+
-+/*
-+ * RX WI structure
-+ */
-+
-+/*
-+ * Word0
-+ */
-+#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
-+#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
-+#define RXWI_W0_BSSID FIELD32(0x00001c00)
-+#define RXWI_W0_UDF FIELD32(0x0000e000)
-+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
-+#define RXWI_W0_TID FIELD32(0xf0000000)
-+
-+/*
-+ * Word1
-+ */
-+#define RXWI_W1_FRAG FIELD32(0x0000000f)
-+#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
-+#define RXWI_W1_MCS FIELD32(0x007f0000)
-+#define RXWI_W1_BW FIELD32(0x00800000)
-+#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
-+#define RXWI_W1_STBC FIELD32(0x06000000)
-+#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
-+
-+/*
-+ * Word2
-+ */
-+#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
-+#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
-+#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
-+
-+/*
-+ * Word3
-+ */
-+#define RXWI_W3_SNR0 FIELD32(0x000000ff)
-+#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
-+
-+/*
-+ * Macro's for converting txpower from EEPROM to mac80211 value
-+ * and from mac80211 value to register value.
-+ */
-+#define MIN_G_TXPOWER 0
-+#define MIN_A_TXPOWER -7
-+#define MAX_G_TXPOWER 31
-+#define MAX_A_TXPOWER 15
-+#define DEFAULT_TXPOWER 5
-+
-+#define TXPOWER_G_FROM_DEV(__txpower) \
-+ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-+
-+#define TXPOWER_G_TO_DEV(__txpower) \
-+ clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-+
-+#define TXPOWER_A_FROM_DEV(__txpower) \
-+ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-+
-+#define TXPOWER_A_TO_DEV(__txpower) \
-+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
-+
-+#endif /* RT2800USB_H */
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -144,6 +144,7 @@ struct rt2x00_chip {
- #define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */
- #define RT2880 0x2880 /* WSOC */
- #define RT3052 0x3052 /* WSOC */
-+#define RT2870 0x1600
-
- u16 rf;
- u32 rev;
---- a/drivers/net/wireless/ath9k/main.c
-+++ b/drivers/net/wireless/ath9k/main.c
-@@ -1031,6 +1031,9 @@ static void ath_unregister_led(struct at
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -1020,6 +1020,9 @@ static void ath_unregister_led(struct at
static void ath_deinit_leds(struct ath_softc *sc)
{
cancel_delayed_work_sync(&sc->ath_led_blink_work);
ath_unregister_led(&sc->assoc_led);
sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-@@ -1045,6 +1048,9 @@ static void ath_init_leds(struct ath_sof
+@@ -1034,6 +1037,9 @@ static void ath_init_leds(struct ath_sof
char *trigger;
int ret;
--- a/config.mk
+++ b/config.mk
-@@ -125,7 +125,7 @@ ifneq ($(CONFIG_PCI),)
+@@ -124,7 +124,7 @@ ifneq ($(CONFIG_PCI),)
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
---- a/drivers/net/wireless/ath9k/hw.c
-+++ b/drivers/net/wireless/ath9k/hw.c
-@@ -513,11 +513,18 @@ static int ath9k_hw_init_macaddr(struct
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -534,8 +534,18 @@ static int ath9k_hw_init_macaddr(struct
ah->macaddr[2 * i] = eeval >> 8;
ah->macaddr[2 * i + 1] = eeval & 0xff;
}
-- if (sum == 0 || sum == 0xffff * 3) {
-+
+- if (sum == 0 || sum == 0xffff * 3)
+- return -EADDRNOTAVAIL;
+ if (!is_valid_ether_addr(ah->macaddr)) {
+ DECLARE_MAC_BUF(macbuf);
+
+ print_mac(macbuf, ah->macaddr));
+
+ random_ether_addr(ah->macaddr);
- DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-- "mac address read failed: %pM\n",
-- ah->macaddr);
-- return -EADDRNOTAVAIL;
++ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+ "random mac address will be used: %s\n",
+ print_mac(macbuf, ah->macaddr));
- }
++ }
return 0;
+ }
+++ /dev/null
-From dd51972ba5d11df434faf9171fe02c0cc48d35c1 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 29 Apr 2009 08:52:16 +0200
-Subject: [PATCH] ath9k: uninline ath9k_io{read,write}32 routines
-
-The spin_lock handling uses lots of instructions on some archs.
-With this patch the size of the ath9k module will be significantly
-smaller.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
-Example results on different platforms:
-
-xscale: 468344 -> 293022 (62.6%)
-mips32: 549847 -> 389421 (70.8%)
-mips32r2: 510520 -> 394020 (77.2%)
-ppc40x: 365153 -> 296928 (81.3%)
-
- drivers/net/wireless/ath9k/ath9k.h | 33 +------------------------------
- drivers/net/wireless/ath9k/hw.c | 32 +++++++++++++++++++++++++++++++
- 2 files changed, 34 insertions(+), 31 deletions(-)
-
---- a/drivers/net/wireless/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath9k/ath9k.h
-@@ -721,36 +721,7 @@ void ath9k_wiphy_pause_all_forced(struct
- bool ath9k_wiphy_scanning(struct ath_softc *sc);
- void ath9k_wiphy_work(struct work_struct *work);
-
--/*
-- * Read and write, they both share the same lock. We do this to serialize
-- * reads and writes on Atheros 802.11n PCI devices only. This is required
-- * as the FIFO on these devices can only accept sanely 2 requests. After
-- * that the device goes bananas. Serializing the reads/writes prevents this
-- * from happening.
-- */
--
--static inline void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
--{
-- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-- unsigned long flags;
-- spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-- iowrite32(val, ah->ah_sc->mem + reg_offset);
-- spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-- } else
-- iowrite32(val, ah->ah_sc->mem + reg_offset);
--}
--
--static inline unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
--{
-- u32 val;
-- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-- unsigned long flags;
-- spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-- val = ioread32(ah->ah_sc->mem + reg_offset);
-- spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-- } else
-- val = ioread32(ah->ah_sc->mem + reg_offset);
-- return val;
--}
-+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
-+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
-
- #endif /* ATH9K_H */
---- a/drivers/net/wireless/ath9k/hw.c
-+++ b/drivers/net/wireless/ath9k/hw.c
-@@ -84,6 +84,38 @@ static u32 ath9k_hw_mac_to_clks(struct a
- return ath9k_hw_mac_clks(ah, usecs);
- }
-
-+/*
-+ * Read and write, they both share the same lock. We do this to serialize
-+ * reads and writes on Atheros 802.11n PCI devices only. This is required
-+ * as the FIFO on these devices can only accept sanely 2 requests. After
-+ * that the device goes bananas. Serializing the reads/writes prevents this
-+ * from happening.
-+ */
-+
-+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-+{
-+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-+ iowrite32(val, ah->ah_sc->mem + reg_offset);
-+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-+ } else
-+ iowrite32(val, ah->ah_sc->mem + reg_offset);
-+}
-+
-+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-+{
-+ u32 val;
-+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-+ val = ioread32(ah->ah_sc->mem + reg_offset);
-+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-+ } else
-+ val = ioread32(ah->ah_sc->mem + reg_offset);
-+ return val;
-+}
-+
- bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
- {
- int i;
+++ /dev/null
-This patch adds poisoning and sanity checking to the RX DMA buffers.
-This is used for protection against buggy hardware/firmware that raises
-RX interrupts without doing an actual DMA transfer.
-
-This mechanism protects against rare "bad packets" (due to uninitialized skb data)
-and rare kernel crashes due to uninitialized RX headers.
-
-The poison is selected to not match on valid frames and to be cheap for checking.
-
-The poison check mechanism _might_ trigger incorrectly, if we are voluntarily
-receiving frames with bad PLCP headers. However, this is nonfatal, because the
-chance of such a match is basically zero and in case it happens it just results
-in dropping the packet.
-Bad-PLCP RX defaults to off, and you should leave it off unless you want to listen
-to the latest news broadcasted by your microwave oven.
-
-This patch also moves the initialization of the RX-header "length" field in front of
-the mapping of the DMA buffer. The CPU should not touch the buffer after we mapped it.
-
-Cc: stable@kernel.org
-Reported-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it>
-Signed-off-by: Michael Buesch <mb@bu3sch.de>
-
----
-
---- a/drivers/net/wireless/b43/dma.c
-+++ b/drivers/net/wireless/b43/dma.c
-@@ -555,11 +555,32 @@ address_error:
- return 1;
- }
-
-+static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
-+{
-+ unsigned char *f = skb->data + ring->frameoffset;
-+
-+ return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF);
-+}
-+
-+static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb)
-+{
-+ struct b43_rxhdr_fw4 *rxhdr;
-+ unsigned char *frame;
-+
-+ /* This poisons the RX buffer to detect DMA failures. */
-+
-+ rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
-+ rxhdr->frame_len = 0;
-+
-+ B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2);
-+ frame = skb->data + ring->frameoffset;
-+ memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */);
-+}
-+
- static int setup_rx_descbuffer(struct b43_dmaring *ring,
- struct b43_dmadesc_generic *desc,
- struct b43_dmadesc_meta *meta, gfp_t gfp_flags)
- {
-- struct b43_rxhdr_fw4 *rxhdr;
- dma_addr_t dmaaddr;
- struct sk_buff *skb;
-
-@@ -568,6 +589,7 @@ static int setup_rx_descbuffer(struct b4
- skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
- if (unlikely(!skb))
- return -ENOMEM;
-+ b43_poison_rx_buffer(ring, skb);
- dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
- if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
- /* ugh. try to realloc in zone_dma */
-@@ -578,6 +600,7 @@ static int setup_rx_descbuffer(struct b4
- skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
- if (unlikely(!skb))
- return -ENOMEM;
-+ b43_poison_rx_buffer(ring, skb);
- dmaaddr = map_descbuffer(ring, skb->data,
- ring->rx_buffersize, 0);
- if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
-@@ -592,9 +615,6 @@ static int setup_rx_descbuffer(struct b4
- ring->ops->fill_descriptor(ring, desc, dmaaddr,
- ring->rx_buffersize, 0, 0, 0);
-
-- rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
-- rxhdr->frame_len = 0;
--
- return 0;
- }
-
-@@ -1489,6 +1509,15 @@ static void dma_rx(struct b43_dmaring *r
- goto drop;
- }
- }
-+ if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) {
-+ /* Something went wrong with the DMA.
-+ * The device did not touch the buffer and did not overwrite the poison. */
-+ b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n");
-+ /* recycle the descriptor buffer. */
-+ sync_descbuffer_for_device(ring, meta->dmaaddr,
-+ ring->rx_buffersize);
-+ goto drop;
-+ }
- if (unlikely(len > ring->rx_buffersize)) {
- /* The data did not fit into one descriptor buffer
- * and is split over multiple buffers.
+++ /dev/null
-The RX buffer poison needs to be refreshed, if we recycle an RX buffer,
-because it might be (partially) overwritten by some DMA operations.
-
-Cc: stable@kernel.org
-Cc: Francesco Gringoli <francesco.gringoli@ing.unibs.it>
-Signed-off-by: Michael Buesch <mb@bu3sch.de>
-
----
-
---- a/drivers/net/wireless/b43/dma.c
-+++ b/drivers/net/wireless/b43/dma.c
-@@ -1503,20 +1503,16 @@ static void dma_rx(struct b43_dmaring *r
- len = le16_to_cpu(rxhdr->frame_len);
- } while (len == 0 && i++ < 5);
- if (unlikely(len == 0)) {
-- /* recycle the descriptor buffer. */
-- sync_descbuffer_for_device(ring, meta->dmaaddr,
-- ring->rx_buffersize);
-- goto drop;
-+ dmaaddr = meta->dmaaddr;
-+ goto drop_recycle_buffer;
- }
- }
- if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) {
- /* Something went wrong with the DMA.
- * The device did not touch the buffer and did not overwrite the poison. */
- b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n");
-- /* recycle the descriptor buffer. */
-- sync_descbuffer_for_device(ring, meta->dmaaddr,
-- ring->rx_buffersize);
-- goto drop;
-+ dmaaddr = meta->dmaaddr;
-+ goto drop_recycle_buffer;
- }
- if (unlikely(len > ring->rx_buffersize)) {
- /* The data did not fit into one descriptor buffer
-@@ -1530,6 +1526,7 @@ static void dma_rx(struct b43_dmaring *r
- while (1) {
- desc = ops->idx2desc(ring, *slot, &meta);
- /* recycle the descriptor buffer. */
-+ b43_poison_rx_buffer(ring, meta->skb);
- sync_descbuffer_for_device(ring, meta->dmaaddr,
- ring->rx_buffersize);
- *slot = next_slot(ring, *slot);
-@@ -1548,8 +1545,7 @@ static void dma_rx(struct b43_dmaring *r
- err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC);
- if (unlikely(err)) {
- b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n");
-- sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
-- goto drop;
-+ goto drop_recycle_buffer;
- }
-
- unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
-@@ -1559,6 +1555,11 @@ static void dma_rx(struct b43_dmaring *r
- b43_rx(ring->dev, skb, rxhdr);
- drop:
- return;
-+
-+drop_recycle_buffer:
-+ /* Poison and recycle the RX buffer. */
-+ b43_poison_rx_buffer(ring, skb);
-+ sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
- }
-
- void b43_dma_rx(struct b43_dmaring *ring)
+++ /dev/null
-This patch is submitted upstream and can be removed when it hits compat-wireless.
-
---mb
-
-
-
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
-@@ -625,9 +625,11 @@ struct b43_wl {
- /* Stats about the wireless interface */
- struct ieee80211_low_level_stats ieee_stats;
-
-+#ifdef CONFIG_B43_HWRNG
- struct hwrng rng;
-- u8 rng_initialized;
-+ bool rng_initialized;
- char rng_name[30 + 1];
-+#endif /* CONFIG_B43_HWRNG */
-
- /* The RF-kill button */
- struct b43_rfkill rfkill;
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -2980,6 +2980,7 @@ static void b43_security_init(struct b43
- b43_clear_keys(dev);
- }
-
-+#ifdef CONFIG_B43_HWRNG
- static int b43_rng_read(struct hwrng *rng, u32 *data)
- {
- struct b43_wl *wl = (struct b43_wl *)rng->priv;
-@@ -2995,17 +2996,21 @@ static int b43_rng_read(struct hwrng *rn
-
- return (sizeof(u16));
- }
-+#endif /* CONFIG_B43_HWRNG */
-
- static void b43_rng_exit(struct b43_wl *wl)
- {
-+#ifdef CONFIG_B43_HWRNG
- if (wl->rng_initialized)
- hwrng_unregister(&wl->rng);
-+#endif /* CONFIG_B43_HWRNG */
- }
-
- static int b43_rng_init(struct b43_wl *wl)
- {
-- int err;
-+ int err = 0;
-
-+#ifdef CONFIG_B43_HWRNG
- snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
- "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
- wl->rng.name = wl->rng_name;
-@@ -3018,6 +3023,7 @@ static int b43_rng_init(struct b43_wl *w
- b43err(wl, "Failed to register the random "
- "number generator (%d)\n", err);
- }
-+#endif /* CONFIG_B43_HWRNG */
-
- return err;
- }
---- a/config.mk
-+++ b/config.mk
-@@ -148,6 +148,7 @@ CONFIG_ATH9K_DEBUG=y
- # CONFIG_B43_PIO=y
- # CONFIG_B43_LEDS=y
- # CONFIG_B43_RFKILL=y
-+# CONFIG_B43_HWRNG=y
- # CONFIG_B43_DEBUG=y
- # CONFIG_B43_FORCE_PIO=y
-
+++ /dev/null
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
-@@ -778,8 +778,8 @@ struct b43_wldev {
- /* Reason code of the last interrupt. */
- u32 irq_reason;
- u32 dma_reason[6];
-- /* saved irq enable/disable state bitfield. */
-- u32 irq_savedstate;
-+ /* The currently active generic-interrupt mask. */
-+ u32 irq_mask;
- /* Link Quality calculation context. */
- struct b43_noise_calculation noisecalc;
- /* if > 0 MAC is suspended. if == 0 MAC is enabled. */
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -673,32 +673,6 @@ static void b43_short_slot_timing_disabl
- b43_set_slot_time(dev, 20);
- }
-
--/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
-- * Returns the _previously_ enabled IRQ mask.
-- */
--static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask)
--{
-- u32 old_mask;
--
-- old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-- b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask);
--
-- return old_mask;
--}
--
--/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
-- * Returns the _previously_ enabled IRQ mask.
-- */
--static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask)
--{
-- u32 old_mask;
--
-- old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-- b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
--
-- return old_mask;
--}
--
- /* Synchronize IRQ top- and bottom-half.
- * IRQs must be masked before calling this.
- * This must not be called with the irq_lock held.
-@@ -1593,7 +1567,7 @@ static void handle_irq_beacon(struct b43
- /* This is the bottom half of the asynchronous beacon update. */
-
- /* Ignore interrupt in the future. */
-- dev->irq_savedstate &= ~B43_IRQ_BEACON;
-+ dev->irq_mask &= ~B43_IRQ_BEACON;
-
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
-@@ -1602,7 +1576,7 @@ static void handle_irq_beacon(struct b43
- /* Schedule interrupt manually, if busy. */
- if (beacon0_valid && beacon1_valid) {
- b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
-- dev->irq_savedstate |= B43_IRQ_BEACON;
-+ dev->irq_mask |= B43_IRQ_BEACON;
- return;
- }
-
-@@ -1641,11 +1615,9 @@ static void b43_beacon_update_trigger_wo
- if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- spin_lock_irq(&wl->irq_lock);
- /* update beacon right away or defer to irq */
-- dev->irq_savedstate = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
- handle_irq_beacon(dev);
- /* The handler might have updated the IRQ mask. */
-- b43_write32(dev, B43_MMIO_GEN_IRQ_MASK,
-- dev->irq_savedstate);
-+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
- mmiowb();
- spin_unlock_irq(&wl->irq_lock);
- }
-@@ -1879,7 +1851,7 @@ static void b43_interrupt_tasklet(struct
- if (reason & B43_IRQ_TX_OK)
- handle_irq_transmit_status(dev);
-
-- b43_interrupt_enable(dev, dev->irq_savedstate);
-+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
- mmiowb();
- spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
- }
-@@ -1893,7 +1865,9 @@ static void b43_interrupt_ack(struct b43
- b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
- b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
- b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
-+/* Unused ring
- b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
-+*/
- }
-
- /* Interrupt handler top-half */
-@@ -1903,18 +1877,19 @@ static irqreturn_t b43_interrupt_handler
- struct b43_wldev *dev = dev_id;
- u32 reason;
-
-- if (!dev)
-- return IRQ_NONE;
-+ B43_WARN_ON(!dev);
-
- spin_lock(&dev->wl->irq_lock);
-
-- if (b43_status(dev) < B43_STAT_STARTED)
-+ if (unlikely(b43_status(dev) < B43_STAT_STARTED)) {
-+ /* This can only happen on shared IRQ lines. */
- goto out;
-+ }
- reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
- if (reason == 0xffffffff) /* shared IRQ */
- goto out;
- ret = IRQ_HANDLED;
-- reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
-+ reason &= dev->irq_mask;
- if (!reason)
- goto out;
-
-@@ -1928,16 +1903,18 @@ static irqreturn_t b43_interrupt_handler
- & 0x0001DC00;
- dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
- & 0x0000DC00;
-+/* Unused ring
- dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
- & 0x0000DC00;
-+*/
-
- b43_interrupt_ack(dev, reason);
- /* disable all IRQs. They are enabled again in the bottom half. */
-- dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
-+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
- /* save the reason code and call our bottom half. */
- dev->irq_reason = reason;
- tasklet_schedule(&dev->isr_tasklet);
-- out:
-+out:
- mmiowb();
- spin_unlock(&dev->wl->irq_lock);
-
-@@ -3799,7 +3776,7 @@ static void b43_wireless_core_stop(struc
- * setting the status to INITIALIZED, as the interrupt handler
- * won't care about IRQs then. */
- spin_lock_irqsave(&wl->irq_lock, flags);
-- dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
-+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
- b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- b43_synchronize_irq(dev);
-@@ -3840,7 +3817,7 @@ static int b43_wireless_core_start(struc
-
- /* Start data flow (TX/RX). */
- b43_mac_enable(dev);
-- b43_interrupt_enable(dev, dev->irq_savedstate);
-+ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
-
- /* Start maintainance work */
- b43_periodic_tasks_setup(dev);
-@@ -3998,9 +3975,9 @@ static void setup_struct_wldev_for_init(
- /* IRQ related flags */
- dev->irq_reason = 0;
- memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
-- dev->irq_savedstate = B43_IRQ_MASKTEMPLATE;
-+ dev->irq_mask = B43_IRQ_MASKTEMPLATE;
- if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
-- dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR;
-+ dev->irq_mask &= ~B43_IRQ_PHY_TXERR;
-
- dev->mac_suspended = 1;
-
--- /dev/null
+Completely untested patch to implement firmware capabilities
+and automagic QoS-disabling.
+
+
+--- a/drivers/net/wireless/b43/b43.h
++++ b/drivers/net/wireless/b43/b43.h
+@@ -163,6 +163,7 @@ enum {
+ #define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */
+ #define B43_SHM_SH_PCTLWDPOS 0x0008
+ #define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO only) */
++#define B43_SHM_SH_FWCAPA 0x0042 /* Firmware capabilities (Opensource firmware only) */
+ #define B43_SHM_SH_PHYVER 0x0050 /* PHY version */
+ #define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */
+ #define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */
+@@ -297,6 +298,10 @@ enum {
+ #define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */
+ #define B43_HF_PR45960W 0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */
+
++/* Firmware capabilities field in SHM (Opensource firmware only) */
++#define B43_FWCAPA_HWCRYPTO 0x0001
++#define B43_FWCAPA_QOS 0x0002
++
+ /* MacFilter offsets. */
+ #define B43_MACFILTER_SELF 0x0000
+ #define B43_MACFILTER_BSSID 0x0003
+@@ -596,6 +601,13 @@ struct b43_wl {
+ /* Pointer to the ieee80211 hardware data structure */
+ struct ieee80211_hw *hw;
+
++ /* The number of queues that were registered with the mac80211 subsystem
++ * initially. This is a backup copy of hw->queues in case hw->queues has
++ * to be dynamically lowered at runtime (Firmware does not support QoS).
++ * hw->queues has to be restored to the original value before unregistering
++ * from the mac80211 subsystem. */
++ u16 mac80211_initially_registered_queues;
++
+ struct mutex mutex;
+ spinlock_t irq_lock;
+ /* R/W lock for data transmission.
+@@ -752,6 +764,8 @@ struct b43_wldev {
+ bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */
+ bool radio_hw_enable; /* saved state of radio hardware enabled state */
+ bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */
++ bool qos_enabled; /* TRUE, if QoS is used. */
++ bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
+
+ /* PHY/Radio device. */
+ struct b43_phy phy;
+--- a/drivers/net/wireless/b43/dma.c
++++ b/drivers/net/wireless/b43/dma.c
+@@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_b
+ {
+ struct b43_dmaring *ring;
+
+- if (b43_modparam_qos) {
++ if (dev->qos_enabled) {
+ /* 0 = highest priority */
+ switch (queue_prio) {
+ default:
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -80,8 +80,8 @@ static int modparam_nohwcrypt;
+ module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+-int b43_modparam_qos = 1;
+-module_param_named(qos, b43_modparam_qos, int, 0444);
++static int modparam_qos = 1;
++module_param_named(qos, modparam_qos, int, 0444);
+ MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
+
+ static int modparam_btcoex = 1;
+@@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev,
+ b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
+ }
+
++/* Read the firmware capabilities bitmask (Opensource firmware only) */
++static u16 b43_fwcapa_read(struct b43_wldev *dev)
++{
++ B43_WARN_ON(!dev->fw.opensource);
++ return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
++}
++
+ void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
+ {
+ u32 low, high;
+@@ -2307,12 +2314,34 @@ static int b43_upload_microcode(struct b
+ dev->fw.patch = fwpatch;
+ dev->fw.opensource = (fwdate == 0xFFFF);
+
++ /* Default to use-all-queues. */
++ dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
++ dev->qos_enabled = !!modparam_qos;
++ /* Default to firmware/hardware crypto acceleration. */
++ dev->hwcrypto_enabled = 1;
++
+ if (dev->fw.opensource) {
++ u16 fwcapa;
++
+ /* Patchlevel info is encoded in the "time" field. */
+ dev->fw.patch = fwtime;
+- b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
+- dev->fw.rev, dev->fw.patch,
+- dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
++ b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
++ dev->fw.rev, dev->fw.patch);
++
++ fwcapa = b43_fwcapa_read(dev);
++ if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
++ b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
++ /* Disable hardware crypto and fall back to software crypto. */
++ dev->hwcrypto_enabled = 0;
++ }
++ if (!(fwcapa & B43_FWCAPA_QOS)) {
++ b43info(dev->wl, "QoS not supported by firmware\n");
++ /* Disable QoS. Tweak hw->queues to 1. It will be restored before
++ * ieee80211_unregister to make sure the networking core can
++ * properly free possible resources. */
++ dev->wl->hw->queues = 1;
++ dev->qos_enabled = 0;
++ }
+ } else {
+ b43info(dev->wl, "Loading firmware version %u.%u "
+ "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
+@@ -3629,7 +3658,7 @@ static int b43_op_set_key(struct ieee802
+ if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
+ goto out_unlock;
+
+- if (dev->fw.pcm_request_failed) {
++ if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
+ /* We don't have firmware for the crypto engine.
+ * Must use software-crypto. */
+ err = -EOPNOTSUPP;
+@@ -4737,6 +4766,7 @@ static int b43_wireless_init(struct ssb_
+ b43err(NULL, "Could not allocate ieee80211 device\n");
+ goto out;
+ }
++ wl = hw_to_b43_wl(hw);
+
+ /* fill hw info */
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+@@ -4750,7 +4780,8 @@ static int b43_wireless_init(struct ssb_
+ BIT(NL80211_IFTYPE_WDS) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
+- hw->queues = b43_modparam_qos ? 4 : 1;
++ hw->queues = modparam_qos ? 4 : 1;
++ wl->mac80211_initially_registered_queues = hw->queues;
+ hw->max_rates = 2;
+ SET_IEEE80211_DEV(hw, dev->dev);
+ if (is_valid_ether_addr(sprom->et1mac))
+@@ -4758,9 +4789,7 @@ static int b43_wireless_init(struct ssb_
+ else
+ SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
+
+- /* Get and initialize struct b43_wl */
+- wl = hw_to_b43_wl(hw);
+- memset(wl, 0, sizeof(*wl));
++ /* Initialize struct b43_wl */
+ wl->hw = hw;
+ spin_lock_init(&wl->irq_lock);
+ rwlock_init(&wl->tx_lock);
+@@ -4826,8 +4855,13 @@ static void b43_remove(struct ssb_device
+ cancel_work_sync(&wldev->restart_work);
+
+ B43_WARN_ON(!wl);
+- if (wl->current_dev == wldev)
++ if (wl->current_dev == wldev) {
++ /* Restore the queues count before unregistering, because firmware detect
++ * might have modified it. Restoring is important, so the networking
++ * stack can properly free resources. */
++ wl->hw->queues = wl->mac80211_initially_registered_queues;
+ ieee80211_unregister_hw(wl->hw);
++ }
+
+ b43_one_core_detach(dev);
+
+--- a/drivers/net/wireless/b43/main.h
++++ b/drivers/net/wireless/b43/main.h
+@@ -39,7 +39,6 @@
+ #define PAD_BYTES(nr_bytes) P4D_BYTES( __LINE__ , (nr_bytes))
+
+
+-extern int b43_modparam_qos;
+ extern int b43_modparam_verbose;
+
+ /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if
+--- a/drivers/net/wireless/b43/pio.c
++++ b/drivers/net/wireless/b43/pio.c
+@@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_qu
+ {
+ struct b43_pio_txqueue *q;
+
+- if (b43_modparam_qos) {
++ if (dev->qos_enabled) {
+ /* 0 = highest priority */
+ switch (queue_prio) {
+ default:
--- /dev/null
+Fixes compile error when CONFIG_PM=n is set
+
+--- a/drivers/net/wireless/p54/p54usb.c
++++ b/drivers/net/wireless/p54/p54usb.c
+@@ -919,9 +919,11 @@ static int __devinit p54u_probe(struct u
+ priv->common.open = p54u_open;
+ priv->common.stop = p54u_stop;
+ if (recognized_pipes < P54U_PIPE_NUMBER) {
++#ifdef CONFIG_PM
+ /* ISL3887 needs a full reset on resume */
+ udev->reset_resume = 1;
+ err = p54u_device_reset(dev);
++#endif
+
+ priv->hw_type = P54U_3887;
+ dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
projects / openwrt.git / commitdiff