add script for autogenerating /etc/config/network based on nvram, remove default...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2829 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/config/network
deleted file mode 100644 (file)
index 9487a74..0000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/config/network
+++ /dev/null
@@ -1,31 +0,0 @@
-# Network configuration file
-# Uncomment the following statements to change the network configuration
-
-## LAN configuration
-# lan_ifname="br0"
-# lan_proto="static"
-# lan_ipaddr="192.168.1.1"
-# lan_netmask="255.255.255.0"
-# lan_gateway=""
-# lan_dns=""
-
-## WAN configuration (PPPoE)
-# wan_proto=pppoe
-# wan_ifname=ppp0
-# pppoe_atm=1
-# pppoe_ifname=nas0
-# atm_vpi=8
-# atm_vci=35
-# ppp_username=my_username
-# ppp_passwd=my_passwd
-# ppp_mtu=1492
-
-## WAN configuration (PPPoA)
-# wan_proto=pppoa
-# wan_ifname=ppp0
-# atm_vpi=8
-# atm_vci=35
-# ppp_username=my_username
-# ppp_passwd=my_passwd
-# ppp_mtu=1500
-

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
new file mode 100755 (executable)
index 0000000..57e6ba1
--- /dev/null
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
@@ -0,0 +1,104 @@
+#!/bin/sh
+[ -e /etc/config/network ] && exit 0
+
+(
+       if [ "$(/usr/bin/head -c4 /dev/mtdblock/1 | /usr/bin/tail -c3)" = "ELF" ]; then
+               # WGT634u
+               echo boardtype=wgt634u
+       else
+               strings /dev/mtdblock/3
+       fi
+) | awk '
+function p(name) {
+       if (c[name] != "") print name "=\"" c[name] "\""
+}
+
+BEGIN {
+       FS="="
+       c["lan_ifname"]="br0"
+       c["lan_ifnames"]="vlan0 eth1"
+       c["wan_proto"]="none"
+       c["wan_ifname"]="vlan1"
+       c["vlan0ports"]="1 2 3 4 5*"
+       c["vlan1ports"]="0 5"
+}
+
+($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+       nvram[$1] = $2
+}
+
+END {
+       # v1 hardware
+       if (nvram["boardtype"] == "bcm4710dev") {
+               # Linksys WRT54G v1.x
+               if (nvram["boardnum"] == "42") {
+                       c["vlan0ports"]=""
+                       c["vlan1ports"]=""
+                       c["lan_ifnames"]="vlan2 eth2"
+               }
+
+               # Asus WL-500g
+               if (nvram["boardnum"] == "asusX") {
+                       c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
+                       # wan_ifname=eth1
+               }
+       }
+       if (nvram["boardtype"] == "wgt634u") {
+               c["vlan0ports"] = "0 1 2 3 5*"
+               c["vlan1ports"] = "4 5"
+       }
+       if (nvram["boardtype"] == "0x0467") {
+               c["vlan0ports"] = "0 1 2 3 5*"
+               c["vlan1ports"] = "4 5"
+       }
+
+       # WAP54G
+       if ((nvram["boardnum"] == "2") || \
+               (nvram["boardnum"] == "1024")) {
+               c["lan_ifnames"]="eth0 eth1"
+               c["wan_ifname"]=""
+       }
+
+       print "#### VLAN configuration "
+       print "vlan0hwname=et0"
+       print "vlan1hwname=et0"
+       p("vlan0ports")
+       p("vlan1ports")
+       print ""
+       print ""
+       
+       print "#### LAN configuration"
+       print "lan_proto=\"static\""
+       p("lan_ifname")
+       p("lan_ifnames")
+       print "lan_ipaddr=\"192.168.1.1\""
+       print "# lan_dns=\"192.168.1.1\""
+       print "# lan_gateway=\"192.168.1.1\""
+
+       print ""
+       print ""
+
+       print "#### WAN configuration"
+       print "# wan_proto: WAN protocol, available protocols:"
+       print "#   none: disable"
+       print "#   dhcp: DHCP"
+       print "#   static: Static IP"
+       print "#   pppoe: PPP over Ethernet"
+       print "#   pptp: Point-to-Point tunneling Protocol"
+       print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
+       print "#     and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
+       print ""
+       print "wan_proto=dhcp"
+       p("wan_ifname")
+       print "# wan_ipaddr=\"192.168.0.2\""
+       print "# wan_netmask=\"255.255.255.0\""
+       print "# wan_gateway=\"192.168.0.1\""
+       print "# wan_dns=\"192.168.0.1\""
+       print ""
+       print "## PPP over Ethernet and PPTP"
+       print "# wan_ifname=\"ppp0\""
+       print "# pppoe_ifname=\"" c["wan_ifname"] "\""
+       print "# pptp_ifname=\"" c["wan_ifname"] "\""
+       print "# pptp_server_ip=\"192.168.0.1\""
+}
+' > /etc/config/network