#
-# Copyright (C) 2007-2008 OpenWrt.org
+# Copyright (C) 2007-2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=2.6.27.13
+LINUX_VERSION:=2.6.28
SUBTARGETS:=router_le router_be
INITRAMFS_EXTRA_FILES:=
--- /dev/null
+/*
+ * ADM5120 SoC definitions
+ *
+ * This file defines some constants specific to the ADM5120 SoC
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H
+#define _ASM_MIPS_MACH_ADM5120_DEFS_H
+
+#define ADM5120_SDRAM0_BASE 0x00000000
+#define ADM5120_SDRAM1_BASE 0x01000000
+#define ADM5120_SRAM1_BASE 0x10000000
+#define ADM5120_EXTIO0_BASE 0x10C00000
+#define ADM5120_EXTIO0_SIZE 0x00200000
+#define ADM5120_EXTIO1_BASE 0x10E00000
+#define ADM5120_EXTIO1_SIZE 0x00200000
+#define ADM5120_MPMC_BASE 0x11000000
+#define ADM5120_MPMC_SIZE 0x00200000
+#define ADM5120_USBC_BASE 0x11200000
+#define ADM5120_USBC_SIZE 0x00200000
+#define ADM5120_PCIMEM_BASE 0x11400000
+#define ADM5120_PCIMEM_SIZE 0x00100000
+#define ADM5120_PCIIO_BASE 0x11500000
+#define ADM5120_PCIIO_SIZE 0x000FFFF0
+#define ADM5120_PCICFG_ADDR 0x115FFFF0
+#define ADM5120_PCICFG_DATA 0x115FFFF8
+#define ADM5120_PCICFG_SIZE 0x00000010
+#define ADM5120_SWITCH_BASE 0x12000000
+#define ADM5120_SWITCH_SIZE 0x00200000
+#define ADM5120_INTC_BASE 0x12200000
+#define ADM5120_INTC_SIZE 0x00200000
+#define ADM5120_UART0_BASE 0x12600000
+#define ADM5120_UART1_BASE 0x12800000
+#define ADM5120_UART_SIZE 0x00200000
+#define ADM5120_SRAM0_BASE 0x1FC00000
+
+#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE
+#define ADM5120_NAND_SIZE 0xB
+
+#define ADM5120_CLK_175 175000000
+#define ADM5120_CLK_200 200000000
+#define ADM5120_CLK_225 225000000
+#define ADM5120_CLK_250 250000000
+
+#define ADM5120_UART_CLOCK 62500000
+
+#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_INFO_H
+#define _MACH_ADM5120_INFO_H
+
+#include <linux/types.h>
+
+extern unsigned int adm5120_prom_type;
+#define ADM5120_PROM_GENERIC 0
+#define ADM5120_PROM_CFE 1
+#define ADM5120_PROM_MYLOADER 2
+#define ADM5120_PROM_ROUTERBOOT 3
+#define ADM5120_PROM_BOOTBASE 4
+#define ADM5120_PROM_UBOOT 5
+#define ADM5120_PROM_LAST 5
+
+extern unsigned int adm5120_product_code;
+extern unsigned int adm5120_revision;
+extern unsigned int adm5120_nand_boot;
+
+extern unsigned long adm5120_speed;
+#define ADM5120_SPEED_175 175000000
+#define ADM5120_SPEED_200 200000000
+#define ADM5120_SPEED_225 225000000
+#define ADM5120_SPEED_250 250000000
+
+extern unsigned int adm5120_package;
+#define ADM5120_PACKAGE_PQFP 0
+#define ADM5120_PACKAGE_BGA 1
+
+extern unsigned long adm5120_memsize;
+
+extern unsigned long adm5120_mach_type;
+
+#define MACH_ADM5120_GENERIC 0 /* Generic board */
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
+#define MACH_ADM5120_WP54 2 /* Compex WP54G/WP54AG/WPP54G/WPP54AG */
+#define MACH_ADM5120_NP28G 3 /* Compex NP28G */
+#define MACH_ADM5120_NP28GHS 4 /* Compex NP28G HotSpot */
+#define MACH_ADM5120_NP27G 5 /* Compex NP27G */
+#define MACH_ADM5120_WP54Gv1C 6 /* Compex WP54G version 1C */
+#define MACH_ADM5120_RB_11X 7 /* Mikrotik RouterBOARD 111/112 */
+#define MACH_ADM5120_RB_133 8 /* Mikrotik RouterBOARD 133 */
+#define MACH_ADM5120_RB_133C 9 /* Mikrotik RouterBOARD 133c */
+#define MACH_ADM5120_RB_150 10 /* Mikrotik RouterBOARD 150 */
+#define MACH_ADM5120_RB_153 11 /* Mikrotik RouterBOARD 153 */
+#define MACH_ADM5120_RB_192 12 /* Mikrotik RouterBOARD 192 */
+#define MACH_ADM5120_HS100 13 /* ZyXEL HomeSafe 100/100W */
+#define MACH_ADM5120_P334U 14 /* ZyXEL Prestige 334U */
+#define MACH_ADM5120_P334W 15 /* ZyXEL Prestige 334W */
+#define MACH_ADM5120_P334WH 16 /* ZyXEL Prestige 334WH */
+#define MACH_ADM5120_P334WHD 17 /* ZyXEL Prestige 334WHD */
+#define MACH_ADM5120_P334WT 18 /* ZyXEL Prestige 334WT */
+#define MACH_ADM5120_P335 19 /* ZyXEL Prestige 335/335WT */
+#define MACH_ADM5120_P335PLUS 20 /* ZyXEL Prestige 335Plus */
+#define MACH_ADM5120_P335U 21 /* ZyXEL Prestige 335U */
+#define MACH_ADM5120_ES2108 22 /* ZyXEL Ethernet Switch 2108 */
+#define MACH_ADM5120_ES2108F 23 /* ZyXEL Ethernet Switch 2108-F */
+#define MACH_ADM5120_ES2108G 24 /* ZyXEL Ethernet Switch 2108-G */
+#define MACH_ADM5120_ES2108LC 25 /* ZyXEL Ethernet Switch 2108-LC */
+#define MACH_ADM5120_ES2108PWR 26 /* ZyXEL Ethernet Switch 2108-PWR */
+#define MACH_ADM5120_ES2024A 27 /* ZyXEL Ethernet Switch 2024A */
+#define MACH_ADM5120_ES2024PWR 28 /* ZyXEL Ethernet Switch 2024PWR */
+#define MACH_ADM5120_CAS630 29 /* Cellvision CAS-630/630W */
+#define MACH_ADM5120_CAS670 30 /* Cellvision CAS-670/670W */
+#define MACH_ADM5120_CAS700 31 /* Cellvision CAS-700/700W */
+#define MACH_ADM5120_CAS771 32 /* Cellvision CAS-771/771W */
+#define MACH_ADM5120_CAS790 33 /* Cellvision CAS-790 */
+#define MACH_ADM5120_CAS861 34 /* Cellvision CAS-861/861W */
+#define MACH_ADM5120_NFS101U 35 /* Cellvision NFS-101U/101WU */
+#define MACH_ADM5120_NFS202U 36 /* Cellvision NFS-202U/202WU */
+#define MACH_ADM5120_EASY5120PATA 37 /* Infineon EASY 5120P-ATA */
+#define MACH_ADM5120_EASY5120RT 38 /* Infineon EASY 5120-RT */
+#define MACH_ADM5120_EASY5120WVOIP 39 /* Infineon EASY 5120-WVoIP */
+#define MACH_ADM5120_EASY83000 40 /* Infineon EASY-83000 */
+#define MACH_ADM5120_BR6104K 41 /* Edimax BR-6104K */
+#define MACH_ADM5120_BR6104KP 42 /* Edimax BR-6104KP */
+#define MACH_ADM5120_BR61X4WG 43 /* Edimax BR-6104Wg/BR-6114WG */
+#define MACH_ADM5120_PMUGW 44 /* Motorola Powerline MU Gateway */
+
+/*
+ * TODO:remove adm5120_eth* variables when the switch driver will be
+ * converted into a real platform driver
+ */
+extern unsigned int adm5120_eth_num_ports;
+extern unsigned char adm5120_eth_macs[6][6];
+extern unsigned char adm5120_eth_vlans[6];
+
+extern void adm5120_soc_init(void) __init;
+extern void adm5120_mem_init(void) __init;
+extern void adm5120_ndelay(u32 ns);
+
+extern void (*adm5120_board_reset)(void);
+
+extern void adm5120_gpio_init(void) __init;
+extern void adm5120_gpio_csx0_enable(void) __init;
+extern void adm5120_gpio_csx1_enable(void) __init;
+extern void adm5120_gpio_ew_enable(void) __init;
+
+static inline int adm5120_package_pqfp(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_PQFP);
+}
+
+static inline int adm5120_package_bga(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+static inline int adm5120_has_pci(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+static inline int adm5120_has_gmii(void)
+{
+ return (adm5120_package == ADM5120_PACKAGE_BGA);
+}
+
+#endif /* _MACH_ADM5120_INFO_H */
--- /dev/null
+/*
+ * ADM5120 interrupt controller definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in interrupt controller.
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_INTC_H
+#define _MACH_ADM5120_INTC_H
+
+/*
+ * INTC register offsets
+ */
+#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */
+#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */
+#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */
+#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */
+#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR
+#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */
+#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */
+#define INTC_REG_IRQ_TEST_SOURCE 0x1C
+#define INTC_REG_IRQ_SOURCE_SELECT 0x20
+#define INTC_REG_INT_LEVEL 0x24
+
+/*
+ * INTC IRQ numbers
+ */
+#define INTC_IRQ_TIMER 0 /* built in timer */
+#define INTC_IRQ_UART0 1 /* built-in UART0 */
+#define INTC_IRQ_UART1 2 /* built-in UART1 */
+#define INTC_IRQ_USBC 3 /* USB Host Controller */
+#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */
+#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */
+#define INTC_IRQ_PCI0 6 /* PCI slot 2 */
+#define INTC_IRQ_PCI1 7 /* PCI slot 3 */
+#define INTC_IRQ_PCI2 8 /* PCI slot 4 */
+#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */
+#define INTC_IRQ_LAST INTC_IRQ_SWITCH
+#define INTC_IRQ_COUNT 10
+
+/*
+ * INTC register bits
+ */
+#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER )
+#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 )
+#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 )
+#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC )
+#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 )
+#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 )
+#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 )
+#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 )
+#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 )
+#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH )
+#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1)
+
+#endif /* _MACH_ADM5120_INTC_H */
--- /dev/null
+/*
+ * ADM5120 MPMC (Multiport Memory Controller) register definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_MPMC_H
+#define _MACH_ADM5120_MPMC_H
+
+#define MPMC_READ_REG(r) __raw_readl( \
+ (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
+#define MPMC_WRITE_REG(r, v) __raw_writel((v), \
+ (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
+
+#define MPMC_REG_CTRL 0x0000
+#define MPMC_REG_STATUS 0x0004
+#define MPMC_REG_CONF 0x0008
+#define MPMC_REG_DC 0x0020
+#define MPMC_REG_DR 0x0024
+#define MPMC_REG_DRP 0x0030
+
+#define MPMC_REG_DC0 0x0100
+#define MPMC_REG_DRC0 0x0104
+#define MPMC_REG_DC1 0x0120
+#define MPMC_REG_DRC1 0x0124
+#define MPMC_REG_DC2 0x0140
+#define MPMC_REG_DRC2 0x0144
+#define MPMC_REG_DC3 0x0160
+#define MPMC_REG_DRC3 0x0164
+#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */
+#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */
+#define MPMC_REG_SC2 0x0240
+#define MPMC_REG_WEN2 0x0244
+#define MPMC_REG_OEN2 0x0248
+#define MPMC_REG_RD2 0x024C
+#define MPMC_REG_PG2 0x0250
+#define MPMC_REG_WR2 0x0254
+#define MPMC_REG_TN2 0x0258
+#define MPMC_REG_SC3 0x0260
+
+/* Control register bits */
+#define MPMC_CTRL_AM ( 1 << 1 ) /* Address Mirror */
+#define MPMC_CTRL_LPM ( 1 << 2 ) /* Low Power Mode */
+#define MPMC_CTRL_DWB ( 1 << 3 ) /* Drain Write Buffers */
+
+/* Status register bits */
+#define MPMC_STATUS_BUSY ( 1 << 0 ) /* Busy */
+#define MPMC_STATUS_WBS ( 1 << 1 ) /* Write Buffer Status */
+#define MPMC_STATUS_SRA ( 1 << 2 ) /* Self-Refresh Acknowledge*/
+
+/* Dynamic Control register bits */
+#define MPMC_DC_CE ( 1 << 0 )
+#define MPMC_DC_DMC ( 1 << 1 )
+#define MPMC_DC_SRR ( 1 << 2 )
+#define MPMC_DC_SI_SHIFT 7
+#define MPMC_DC_SI_MASK ( 3 << 7 )
+#define MPMC_DC_SI_NORMAL ( 0 << 7 )
+#define MPMC_DC_SI_MODE ( 1 << 7 )
+#define MPMC_DC_SI_PALL ( 2 << 7 )
+#define MPMC_DC_SI_NOP ( 3 << 7 )
+
+#define SRAM_REG_CONF 0x00
+#define SRAM_REG_WWE 0x04
+#define SRAM_REG_WOE 0x08
+#define SRAM_REG_WRD 0x0C
+#define SRAM_REG_WPG 0x10
+#define SRAM_REG_WWR 0x14
+#define SRAM_REG_WTR 0x18
+
+/* Dynamic Configuration register bits */
+#define DC_BE (1 << 19) /* buffer enable */
+#define DC_RW_SHIFT 28 /* shift for number of rows */
+#define DC_RW_MASK 0x03
+#define DC_NB_SHIFT 26 /* shift for number of banks */
+#define DC_NB_MASK 0x01
+#define DC_CW_SHIFT 22 /* shift for number of columns */
+#define DC_CW_MASK 0x07
+#define DC_DW_SHIFT 7 /* shift for device width */
+#define DC_DW_MASK 0x03
+
+/* Static Configuration register bits */
+#define SC_MW_MASK 0x03 /* memory width mask */
+#define SC_MW_8 0x00 /* 8 bit memory width */
+#define SC_MW_16 0x01 /* 16 bit memory width */
+#define SC_MW_32 0x02 /* 32 bit memory width */
+
+#endif /* _MACH_ADM5120_MPMC_H */
--- /dev/null
+/*
+ * ADM5120 NAND interface definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in NAND interface.
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * NAND interface routines was based on a driver for Linux 2.6.19+ which
+ * was derived from the driver for Linux 2.4.xx published by Mikrotik for
+ * their RouterBoard 1xx and 5xx series boards.
+ * Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_NAND_H
+#define _MACH_ADM5120_NAND_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+/* NAND control registers */
+#define NAND_REG_DATA 0x0 /* data register */
+#define NAND_REG_SET_CEn 0x1 /* CE# low */
+#define NAND_REG_CLR_CEn 0x2 /* CE# high */
+#define NAND_REG_CLR_CLE 0x3 /* CLE low */
+#define NAND_REG_SET_CLE 0x4 /* CLE high */
+#define NAND_REG_CLR_ALE 0x5 /* ALE low */
+#define NAND_REG_SET_ALE 0x6 /* ALE high */
+#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */
+#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */
+#define NAND_REG_SET_WPn 0x9 /* WP# low */
+#define NAND_REG_CLR_WPn 0xA /* WP# high */
+#define NAND_REG_STATUS 0xB /* Status register */
+
+#define ADM5120_NAND_STATUS_READY 0x80
+
+#define NAND_READ_REG(r) \
+ readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+#define NAND_WRITE_REG(r, v) \
+ writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+
+/*-------------------------------------------------------------------------*/
+
+static inline void adm5120_nand_enable(void)
+{
+ SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
+ SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
+}
+
+static inline void adm5120_nand_set_wpn(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
+}
+
+static inline void adm5120_nand_set_spn(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
+}
+
+static inline void adm5120_nand_set_cle(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
+}
+
+static inline void adm5120_nand_set_ale(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
+}
+
+static inline void adm5120_nand_set_cen(unsigned int set)
+{
+ NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
+}
+
+static inline u8 adm5120_nand_get_status(void)
+{
+ return NAND_READ_REG(NAND_REG_STATUS);
+}
+
+#endif /* _MACH_ADM5120_NAND_H */
--- /dev/null
+/*
+ * ADM5120 specific platform definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H
+#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio_buttons.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+
+struct adm5120_flash_platform_data {
+ void (*set_vpp)(struct map_info *, int);
+ void (*switch_bank)(unsigned);
+ u32 window_size;
+#ifdef CONFIG_MTD_PARTITIONS
+ unsigned int nr_parts;
+ struct mtd_partition *parts;
+#endif
+};
+
+struct adm5120_switch_platform_data {
+ /* TODO: not yet implemented */
+};
+
+struct adm5120_pci_irq {
+ u8 slot;
+ u8 func;
+ u8 pin;
+ unsigned irq;
+};
+
+#define PCIIRQ(s,f,p,i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)}
+
+#ifdef CONFIG_PCI
+extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
+ struct adm5120_pci_irq *map) __init;
+#else
+static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
+ struct adm5120_pci_irq *map)
+{
+}
+#endif
+
+extern void adm5120_setup_eth_macs(u8 *mac_base) __init;
+
+extern struct adm5120_flash_platform_data adm5120_flash0_data;
+extern struct adm5120_flash_platform_data adm5120_flash1_data;
+
+extern void adm5120_add_device_flash(unsigned id) __init;
+extern void adm5120_add_device_usb(void) __init;
+extern void adm5120_add_device_uart(unsigned id) __init;
+extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init;
+extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init;
+extern void adm5120_add_device_gpio(u32 disable_mask) __init;
+extern void adm5120_add_device_gpio_buttons(unsigned nbuttons,
+ struct gpio_button *buttons) __init;
+
+#define GPIO_LED_DEF(g, n, t, a) { \
+ .name = (n), \
+ .default_trigger = (t), \
+ .gpio = (g), \
+ .active_low = (a) \
+}
+
+#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0)
+#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1)
+
+extern void adm5120_add_device_gpio_leds(unsigned num_leds,
+ struct gpio_led *leds) __init;
+
+#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */
--- /dev/null
+/*
+ * ADM5120 ethernet switch definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in Ethernet switch.
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_SWITCH_H
+#define _MACH_ADM5120_SWITCH_H
+
+#ifndef BIT
+# define BIT(at) (1 << (at))
+#endif
+#define BITMASK(len) (BIT(len)-1)
+
+#define SW_READ_REG(r) __raw_readl( \
+ (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
+#define SW_WRITE_REG(r, v) __raw_writel((v), \
+ (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
+
+/* Switch register offsets */
+#define SWITCH_REG_CODE 0x0000
+#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */
+#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */
+#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */
+#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */
+#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */
+#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */
+#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */
+#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */
+#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */
+#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */
+#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */
+#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */
+#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */
+#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */
+#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */
+#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */
+#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */
+#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */
+#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */
+#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */
+#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */
+#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */
+#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */
+#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */
+#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */
+#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */
+#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */
+#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */
+#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */
+#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */
+#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */
+#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */
+
+#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */
+#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */
+#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */
+#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */
+#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */
+#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */
+#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */
+#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */
+
+#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */
+#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */
+
+#define SWITCH_REG_PORT0_LED 0x0100
+#define SWITCH_REG_PORT1_LED 0x0104
+#define SWITCH_REG_PORT2_LED 0x0108
+#define SWITCH_REG_PORT3_LED 0x010C
+#define SWITCH_REG_PORT4_LED 0x0110
+
+/* CODE register bits */
+#define CODE_PC_MASK BITMASK(16) /* Product Code */
+#define CODE_REV_SHIFT 16
+#define CODE_REV_MASK BITMASK(4) /* Product Revision */
+#define CODE_CLKS_SHIFT 20
+#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */
+#define CODE_CLKS_175 0 /* 175 MHz */
+#define CODE_CLKS_200 1 /* 200 MHz */
+#define CODE_CLKS_225 2 /* 225 MHz */
+#define CODE_CLKS_250 3 /* 250 MHz */
+#define CODE_NAB BIT(24) /* NAND boot */
+#define CODE_PK_MASK BITMASK(1) /* Package type */
+#define CODE_PK_SHIFT 29
+#define CODE_PK_BGA 0 /* BGA package */
+#define CODE_PK_PQFP 1 /* PQFP package */
+
+/* MEMCTRL register bits */
+#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */
+#define MEMCTRL_SDRS_4M 0x01
+#define MEMCTRL_SDRS_8M 0x02
+#define MEMCTRL_SDRS_16M 0x03
+#define MEMCTRL_SDRS_64M 0x04
+#define MEMCTRL_SDRS_128M 0x05
+#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */
+
+#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */
+#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */
+#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */
+#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */
+#define MEMCTRL_SRS_512K 0x01 /* 512KB*/
+#define MEMCTRL_SRS_1M 0x02 /* 1MB */
+#define MEMCTRL_SRS_2M 0x03 /* 2MB */
+#define MEMCTRL_SRS_4M 0x04 /* 4MB */
+
+/* Port bits used in various registers */
+#define SWITCH_PORT_PHY0 BIT(0)
+#define SWITCH_PORT_PHY1 BIT(1)
+#define SWITCH_PORT_PHY2 BIT(2)
+#define SWITCH_PORT_PHY3 BIT(3)
+#define SWITCH_PORT_PHY4 BIT(4)
+#define SWITCH_PORT_MII BIT(5)
+#define SWITCH_PORT_CPU BIT(6)
+
+/* Port bit shorthands */
+#define SWITCH_PORTS_PHY 0x1F /* phy ports */
+#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */
+#define SWITCH_PORTS_ALL 0x7F /* all ports */
+
+/* CPUP_CONF register bits */
+#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */
+#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */
+#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */
+#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */
+#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */
+#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */
+
+/* PORT_CONF0 register bits */
+#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */
+#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */
+#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */
+
+/* PORT_CONF1 register bits */
+#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */
+#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */
+#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */
+
+/* SEND_TRIG register bits */
+#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */
+#define SEND_TRIG_STH BIT(1) /* Send Trigger High */
+
+/* MAC_WT0 register bits */
+#define MAC_WT0_MAWC BIT(0) /* MAC address write command */
+#define MAC_WT0_MWD_SHIFT 1
+#define MAC_WT0_MWD BIT(1) /* MAC write done */
+#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */
+#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */
+#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */
+#define MAC_WT0_WPMN_SHIFT 7
+#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */
+#define MAC_WT0_WAF_EMPTY 0
+#define MAC_WT0_WAF_STATIC 7 /* age: static */
+#define MAC_WT0_MAC0_SHIFT 16
+#define MAC_WT0_MAC1_SHIFT 24
+
+/* MAC_WT1 register bits */
+#define MAC_WT1_MAC2_SHIFT 0
+#define MAC_WT1_MAC3_SHIFT 8
+#define MAC_WT1_MAC4_SHIFT 16
+#define MAC_WT1_MAC5_SHIFT 24
+
+/* BW_CNTL0/BW_CNTL1 register bits */
+#define BW_CNTL_DISABLE 0x00
+#define BW_CNTL_64K 0x01
+#define BW_CNTL_128K 0x02
+#define BW_CNTL_256K 0x03
+#define BW_CNTL_512K 0x04
+#define BW_CNTL_1M 0x05
+#define BW_CNTL_4M 0x06
+#define BW_CNTL_10M 0x07
+
+#define P4TBC_SHIFT 0
+#define P4RBC_SHIFT 4
+#define P5TBC_SHIFT 8
+#define P5RBC_SHIFT 12
+
+#define BW_CNTL1_NAND_ENABLE 0x100
+
+/* PHY_CNTL0 register bits */
+#define PHY_CNTL0_PHYA_MASK BITMASK(5)
+#define PHY_CNTL0_PHYR_MASK BITMASK(5)
+#define PHY_CNTL0_PHYR_SHIFT 8
+#define PHY_CNTL0_WC BIT(13) /* Write Command */
+#define PHY_CNTL0_RC BIT(14) /* Read Command */
+#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */
+#define PHY_CNTL0_WTD_SHIFT 16
+
+/* PHY_CNTL1 register bits */
+#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */
+#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */
+#define PHY_CNTL1_RD_MASK BITMASK(16)
+#define PHY_CNTL1_RD_SHIFT 16
+
+/* PHY_CNTL2 register bits */
+#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */
+#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */
+#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */
+#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */
+#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */
+#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */
+/* PHY_CNTL2_RMAE is bad in datasheet */
+#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */
+
+/* PHY_CNTL3 register bits */
+#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */
+
+/* PORT_TH register bits */
+#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */
+#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */
+#define PORT_TH_CPUT_MASK BITMASK(8)
+#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */
+#define PORT_TH_CPUHT_MASK BITMASK(8)
+#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */
+#define PORT_TH_CPURT_MASK BITMASK(8)
+
+/* EMPTY_CNT register bits */
+#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */
+
+/* GPIO_CONF0 register bits */
+#define GPIO_CONF0_MASK BITMASK(8)
+#define GPIO_CONF0_IM_SHIFT 0
+#define GPIO_CONF0_IV_SHIFT 8
+#define GPIO_CONF0_OE_SHIFT 16
+#define GPIO_CONF0_OV_SHIFT 24
+#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT)
+#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT)
+#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT)
+#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT)
+
+/* GPIO_CONF2 register bits */
+#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */
+#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */
+#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */
+
+/* INT_STATUS/INT_MASK register bits */
+#define SWITCH_INT_SHD BIT(0) /* Send High Done */
+#define SWITCH_INT_SLD BIT(1) /* Send Low Done */
+#define SWITCH_INT_RHD BIT(2) /* Receive High Done */
+#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */
+#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */
+#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */
+#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */
+#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */
+#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */
+#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */
+#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */
+#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */
+#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */
+#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */
+#define SWITCH_INT_MD BIT(15) /* Must Drop */
+#define SWITCH_INT_BCS BIT(16) /* BC Storm */
+#define SWITCH_INT_PSC BIT(18) /* Port Status Change */
+#define SWITCH_INT_ID BIT(19) /* Intruder Detected */
+#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */
+#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */
+#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */
+#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */
+#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */
+
+/* TIMER_INT register bits */
+#define TIMER_INT_TOS BIT(0) /* time-out status */
+#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */
+
+/* TIMER register bits */
+#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */
+#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */
+#define TIMER_TE BIT(16) /* timer enable bit */
+
+/* PORTx_LED register bits */
+#define LED_MODE_MASK BITMASK(4)
+#define LED_MODE_INPUT 0
+#define LED_MODE_FLASH 1
+#define LED_MODE_OUT_HIGH 2
+#define LED_MODE_OUT_LOW 3
+#define LED_MODE_LINK 4
+#define LED_MODE_SPEED 5
+#define LED_MODE_DUPLEX 6
+#define LED_MODE_ACT 7
+#define LED_MODE_COLL 8
+#define LED_MODE_LINK_ACT 9
+#define LED_MODE_DUPLEX_COLL 10
+#define LED_MODE_10M_ACT 11
+#define LED_MODE_100M_ACT 12
+#define LED0_MODE_SHIFT 0 /* LED0 mode shift */
+#define LED1_MODE_SHIFT 4 /* LED1 mode shift */
+#define LED2_MODE_SHIFT 8 /* LED2 mode shift */
+#define LED0_IV_SHIFT 12 /* LED0 input value shift */
+#define LED1_IV_SHIFT 13 /* LED1 input value shift */
+#define LED2_IV_SHIFT 14 /* LED2 input value shift */
+
+#endif /* _MACH_ADM5120_SWITCH_H */
--- /dev/null
+/*
+ * ADM5120 UART definitions
+ *
+ * This header file defines the hardware registers of the ADM5120 SoC
+ * built-in UARTs.
+ *
+ * Copyright (C) 2007 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MACH_ADM5120_UART_H
+#define _MACH_ADM5120_UART_H
+
+#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
+
+#define UART_REG_DATA 0x00
+#define UART_REG_RSR 0x04
+#define UART_REG_ECR UART_REG_RSR
+#define UART_REG_LCRH 0x08
+#define UART_REG_LCRM 0x0C
+#define UART_REG_LCRL 0x10
+#define UART_REG_CTRL 0x14
+#define UART_REG_FLAG 0x18
+
+/* Receive Status Register bits */
+#define UART_RSR_FE ( 1 << 0 )
+#define UART_RSR_PE ( 1 << 1 )
+#define UART_RSR_BE ( 1 << 2 )
+#define UART_RSR_OE ( 1 << 3 )
+#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
+
+#define UART_ECR_ALL 0xFF
+
+/* Line Control High register bits */
+#define UART_LCRH_BRK ( 1 << 0 ) /* send break */
+#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */
+#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */
+#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */
+#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */
+#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */
+
+#define UART_LCRH_WLEN5 ( 0 << 5 )
+#define UART_LCRH_WLEN6 ( 1 << 5 )
+#define UART_LCRH_WLEN7 ( 2 << 5 )
+#define UART_LCRH_WLEN8 ( 3 << 5 )
+
+/* Control register bits */
+#define UART_CTRL_EN ( 1 << 0 )
+
+/* Flag register bits */
+#define UART_FLAG_CTS ( 1 << 0 )
+#define UART_FLAG_DSR ( 1 << 1 )
+#define UART_FLAG_DCD ( 1 << 2 )
+#define UART_FLAG_BUSY ( 1 << 3 )
+#define UART_FLAG_RXFE ( 1 << 4 )
+#define UART_FLAG_TXFF ( 1 << 5 )
+#define UART_FLAG_RXFF ( 1 << 6 )
+#define UART_FLAG_TXFE ( 1 << 7 )
+
+#endif /* _MACH_ADM5120_UART_H */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size definitions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_16 0x00000010
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif
+
+/* END */
--- /dev/null
+/*
+ * ADM5120 specific CPU feature overrides
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ADM5120 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+/* #define cpu_has_vce ? */
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+#define cpu_has_prefetch 1
+/* #define cpu_has_mcheck ? */
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+/* #define cpu_has_pindexed_dcache ? */
+
+/* #define cpu_icache_snoops_remote_store ? */
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+/* #define cpu_has_nofpuex ? */
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+/* #define cpu_has_inclusive_pcaches ? */
+
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+
+#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
--- /dev/null
+/*
+ * ADM5120 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H
+#define _ASM_MIPS_MACH_ADM5120_GPIO_H
+
+#define ARCH_NR_GPIOS 64
+
+#include <asm-generic/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_switch.h>
+
+#define ADM5120_GPIO_PIN0 0
+#define ADM5120_GPIO_PIN1 1
+#define ADM5120_GPIO_PIN2 2
+#define ADM5120_GPIO_PIN3 3
+#define ADM5120_GPIO_PIN4 4
+#define ADM5120_GPIO_PIN5 5
+#define ADM5120_GPIO_PIN6 6
+#define ADM5120_GPIO_PIN7 7
+#define ADM5120_GPIO_P0L0 8
+#define ADM5120_GPIO_P0L1 9
+#define ADM5120_GPIO_P0L2 10
+#define ADM5120_GPIO_P1L0 11
+#define ADM5120_GPIO_P1L1 12
+#define ADM5120_GPIO_P1L2 13
+#define ADM5120_GPIO_P2L0 14
+#define ADM5120_GPIO_P2L1 15
+#define ADM5120_GPIO_P2L2 16
+#define ADM5120_GPIO_P3L0 17
+#define ADM5120_GPIO_P3L1 18
+#define ADM5120_GPIO_P3L2 19
+#define ADM5120_GPIO_P4L0 20
+#define ADM5120_GPIO_P4L1 21
+#define ADM5120_GPIO_P4L2 22
+#define ADM5120_GPIO_MAX 22
+#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1
+
+#define ADM5120_GPIO_LOW 0
+#define ADM5120_GPIO_HIGH 1
+
+#define ADM5120_GPIO_SWITCH 0x10
+#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
+#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
+#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
+#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
+#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
+#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
+#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
+#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
+#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
+#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
+
+extern int __adm5120_gpio0_get_value(unsigned gpio);
+extern void __adm5120_gpio0_set_value(unsigned gpio, int value);
+extern int __adm5120_gpio1_get_value(unsigned gpio);
+extern void __adm5120_gpio1_set_value(unsigned gpio, int value);
+extern int adm5120_gpio_to_irq(unsigned gpio);
+extern int adm5120_irq_to_gpio(unsigned irq);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ int ret;
+
+ switch (gpio) {
+ case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
+ ret = __adm5120_gpio0_get_value(gpio);
+ break;
+ case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
+ ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0);
+ break;
+ default:
+ ret = __gpio_get_value(gpio);
+ break;
+ }
+
+ return ret;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ switch (gpio) {
+ case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7:
+ __adm5120_gpio0_set_value(gpio, value);
+ break;
+ case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2:
+ __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value);
+ break;
+ default:
+ __gpio_set_value(gpio, value);
+ break;
+ }
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return adm5120_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return adm5120_irq_to_gpio(irq);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */
--- /dev/null
+/*
+ * ADM5120 specific IRQ numbers
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H
+#define _ASM_MIPS_MACH_ADM5120_IRQ_H
+
+#define MIPS_CPU_IRQ_BASE 0
+#define NR_IRQS 24
+
+#include_next <irq.h>
+
+#include <asm/mach-adm5120/adm5120_intc.h>
+
+#define NO_IRQ (-1)
+
+#define MIPS_CPU_IRQ_COUNT 8
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+
+#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT)
+#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
+
+#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2)
+#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7)
+
+#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
+#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
+#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
+#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
+#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
+#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
+#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
+#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
+#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
+#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
+
+#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */
--- /dev/null
+/*
+ * ADMBoot specific definitions
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ADMBOOT_H
+#define _ADMBOOT_H
+
+extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init;
+
+#endif /* _ADMBOOT_H */
--- /dev/null
+/*
+ * Broadcom's CFE definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_CFE_H_
+#define _PROM_CFE_H_
+
+extern int cfe_present(void) __init;
+extern char *cfe_getenv(char *);
+
+#endif /*_PROM_CFE_H_*/
--- /dev/null
+/*
+ * Generic prom definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _PROM_GENERIC_H_
+#define _PROM_GENERIC_H_
+
+extern int generic_prom_present(void) __init;
+extern char *generic_prom_getenv(char *);
+
+#endif /*_PROM_GENERIC_H_*/
--- /dev/null
+/*
+ * Compex's MyLoader specific definitions
+ *
+ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/*
+ * Firmware file format:
+ *
+ * <header>
+ * [<block descriptor 0>]
+ * ...
+ * [<block descriptor n>]
+ * <null block descriptor>
+ * [<block data 0>]
+ * ...
+ * [<block data n>]
+ *
+ *
+ */
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_FIRMWARE 0x4C594D00
+#define MYLO_MAGIC_20021103 0x20021103
+#define MYLO_MAGIC_20021107 0x20021107
+
+#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107
+#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103
+#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
+
+/*
+ * Addresses of the data structures provided by MyLoader
+ */
+#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */
+#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */
+#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */
+#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX 0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G 0x0078
+#define DEVID_COMPEX_NP28G 0x044C
+#define DEVID_COMPEX_NP28GHS 0x044E
+#define DEVID_COMPEX_WP54Gv1C 0x0514
+#define DEVID_COMPEX_WP54G 0x0515
+#define DEVID_COMPEX_WP54AG 0x0546
+#define DEVID_COMPEX_WPP54AG 0x0550
+#define DEVID_COMPEX_WPP54G 0x0555
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18 0x047E
+#define DEVID_COMPEX_NP18A 0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M 0x03E8
+#define DEVID_COMPEX_NP26G16M 0x03E9
+
+struct mylo_fw_header {
+ uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */
+ uint32_t crc; /* CRC of the whole firmware */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint16_t vid; /* vendor ID */
+ uint16_t did; /* device ID */
+ uint16_t svid; /* sub vendor ID */
+ uint16_t sdid; /* sub device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi; /* FIXME: firmware version high? */
+ uint32_t fwlo; /* FIXME: firmware version low? */
+ uint32_t flags; /* firmware flags */
+};
+
+#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
+#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
+
+struct mylo_fw_blockdesc {
+ uint32_t type; /* block type */
+ uint32_t addr; /* relative address to flash start */
+ uint32_t dlen; /* size of block data in bytes */
+ uint32_t blen; /* total size of block in bytes */
+};
+
+#define FW_DESC_TYPE_UNUSED 0
+#define FW_DESC_TYPE_USED 1
+
+struct mylo_partition {
+ uint16_t flags; /* partition flags */
+ uint16_t type; /* type of the partition */
+ uint32_t addr; /* relative address of the partition from the
+ flash start */
+ uint32_t size; /* size of the partition in bytes */
+ uint32_t param; /* if this is the active partition, the
+ MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition,
+ * MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
+ * before decompression */
+#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE 0
+#define PARTITION_TYPE_USED 1
+
+#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the
+ partition table */
+
+struct mylo_partition_table {
+ uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */
+ uint32_t res0; /* unknown/unused */
+ uint32_t res1; /* unknown/unused */
+ uint32_t res2; /* unknown/unused */
+ struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+ uint32_t len; /* length of the partition data */
+ uint32_t crc; /* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+ uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t mylo_ver;
+ uint16_t vid; /* Vendor ID */
+ uint16_t did; /* Device ID */
+ uint16_t svid; /* Sub Vendor ID */
+ uint16_t sdid; /* Sub Device ID */
+ uint32_t rev; /* device revision */
+ uint32_t fwhi;
+ uint32_t fwlo;
+ uint32_t tftp_addr;
+ uint32_t prog_start;
+ uint32_t flash_size; /* Size of boot FLASH in bytes */
+ uint32_t dram_size; /* Size of onboard RAM in bytes */
+};
+
+
+struct mylo_eth_addr {
+ uint8_t mac[6];
+ uint8_t csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address
+ in the board parameters */
+
+struct mylo_board_params {
+ uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */
+ uint32_t res0;
+ uint32_t res1;
+ uint32_t res2;
+ struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+struct myloader_info {
+ u32 vid;
+ u32 did;
+ u32 svid;
+ u32 sdid;
+ uint8_t macs[MYLO_ETHADDR_COUNT][6];
+};
+
+extern struct myloader_info myloader_info;
+extern int myloader_present(void) __init;
+
+#endif /* _MYLOADER_H_*/
--- /dev/null
+/*
+ * Mikrotik's RouterBOOT definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ROUTERBOOT_H
+#define _ROUTERBOOT_H
+
+#define RB_MAC_SIZE 6
+
+struct rb_bios_settings {
+ u32 hs_offs; /* hard settings offset */
+ u32 hs_size; /* hard settings size */
+ u32 fw_offs; /* firmware offset */
+ u32 ss_offs; /* soft settings offset */
+ u32 ss_size; /* soft settings size */
+};
+
+struct rb_hard_settings {
+ char *name; /* board name */
+ char *bios_ver; /* BIOS version */
+ u32 mem_size; /* memory size in bytes */
+ u32 mac_count; /* number of mac addresses */
+ u8 *mac_base; /* mac address base */
+};
+
+/*
+ * Magic numbers
+ */
+#define RB_MAGIC_HARD 0x64726148 /* "Hard" */
+#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
+#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
+
+#define RB_ID_TERMINATOR 0
+
+/*
+ * ID values for Hardware settings
+ */
+#define RB_ID_HARD_01 1
+#define RB_ID_HARD_02 2
+#define RB_ID_FLASH_INFO 3
+#define RB_ID_MAC_ADDRESS_PACK 4
+#define RB_ID_BOARD_NAME 5
+#define RB_ID_BIOS_VERSION 6
+#define RB_ID_HARD_07 7
+#define RB_ID_SDRAM_TIMINGS 8
+#define RB_ID_DEVICE_TIMINGS 9
+#define RB_ID_SOFTWARE_ID 10
+#define RB_ID_SERIAL_NUMBER 11
+#define RB_ID_HARD_12 12
+#define RB_ID_MEMORY_SIZE 13
+#define RB_ID_MAC_ADDRESS_COUNT 14
+
+/*
+ * ID values for Software settings
+ */
+#define RB_ID_UART_SPEED 1
+#define RB_ID_BOOT_DELAY 2
+#define RB_ID_BOOT_DEVICE 3
+#define RB_ID_BOOT_KEY 4
+#define RB_ID_CPU_MODE 5
+#define RB_ID_FW_VERSION 6
+#define RB_ID_SOFT_07 7
+#define RB_ID_SOFT_08 8
+#define RB_ID_BOOT_PROTOCOL 9
+#define RB_ID_SOFT_10 10
+#define RB_ID_SOFT_11 11
+
+/*
+ * UART_SPEED values
+ */
+#define RB_UART_SPEED_115200 0
+#define RB_UART_SPEED_57600 1
+#define RB_UART_SPEED_38400 2
+#define RB_UART_SPEED_19200 3
+#define RB_UART_SPEED_9600 4
+#define RB_UART_SPEED_4800 5
+#define RB_UART_SPEED_2400 6
+#define RB_UART_SPEED_1200 7
+
+/*
+ * BOOT_DELAY values
+ */
+#define RB_BOOT_DELAY_0SEC 0
+#define RB_BOOT_DELAY_1SEC 1
+#define RB_BOOT_DELAY_2SEC 2
+
+/*
+ * BOOT_DEVICE values
+ */
+#define RB_BOOT_DEVICE_ETHER 0
+#define RB_BOOT_DEVICE_NANDETH 1
+#define RB_BOOT_DEVICE_ETHONCE 2
+#define RB_BOOT_DEVICE_NANDONLY 3
+
+/*
+ * BOOT_KEY values
+ */
+#define RB_BOOT_KEY_ANY 0
+#define RB_BOOT_KEY_DEL 1
+
+/*
+ * CPU_MODE values
+ */
+#define RB_CPU_MODE_POWERSAVE 0
+#define RB_CPU_MODE_REGULAR 1
+
+/*
+ * BOOT_PROTOCOL values
+ */
+#define RB_BOOT_PROTOCOL_BOOTP 0
+#define RB_BOOT_PROTOCOL_DHCP 1
+
+extern int routerboot_present(void) __init;
+extern char *routerboot_get_boardname(void);
+
+extern struct rb_hard_settings rb_hs;
+
+#endif /* _ROUTERBOOT_H */
--- /dev/null
+/*
+ * ZyNOS (ZyXEL's Networking OS) definitions
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ZYNOS_H
+#define _ZYNOS_H
+
+#define ZYNOS_NAME_LEN 32
+#define ZYNOS_FEAT_BYTES 22
+#define ZYNOS_MAC_LEN 6
+
+struct zynos_board_info {
+ unsigned char vendor[ZYNOS_NAME_LEN];
+ unsigned char product[ZYNOS_NAME_LEN];
+ u32 bootext_addr;
+ u32 res0;
+ u16 board_id;
+ u8 res1[6];
+ u8 feat_other[ZYNOS_FEAT_BYTES];
+ u8 feat_main;
+ u8 res2;
+ u8 mac[ZYNOS_MAC_LEN];
+ u8 country;
+ u8 dbgflag;
+} __attribute__ ((packed));
+
+/*
+ * Vendor IDs
+ */
+#define ZYNOS_VENDOR_ID_ZYXEL 0
+#define ZYNOS_VENDOR_ID_NETGEAR 1
+#define ZYNOS_VENDOR_ID_DLINK 2
+#define ZYNOS_VENDOR_ID_OTHER 3
+#define ZYNOS_VENDOR_ID_LUCENT 4
+
+/*
+ * Vendor names
+ */
+#define ZYNOS_VENDOR_DLINK "D-Link"
+#define ZYNOS_VENDOR_LUCENT "LUCENT"
+#define ZYNOS_VENDOR_NETGEAR "NetGear"
+#define ZYNOS_VENDOR_ZYXEL "ZyXEL"
+
+/*
+ * Board IDs (big-endian)
+ */
+#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */
+#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */
+#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */
+#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */
+#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */
+#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */
+#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */
+#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */
+#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */
+#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */
+#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */
+#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */
+#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/
+#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */
+#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */
+#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */
+
+/*
+ * Some magic numbers (big-endian)
+ */
+#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */
+#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */
+
+struct bootbase_info {
+ u16 vendor_id;
+ u16 board_id;
+ u8 mac[6];
+};
+
+extern struct bootbase_info bootbase_info;
+extern int bootbase_present(void) __init;
+
+#endif /* _ZYNOS_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
+#define __ASM_MIPS_MACH_ADM5120_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
--- /dev/null
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -19,6 +19,21 @@ choice
+ prompt "System type"
+ default SGI_IP22
+
++config ADM5120
++ bool "Infineon/ADMtek ADM5120 SoC based machines"
++ select CEVT_R4K
++ select CSRC_R4K
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_EARLY_PRINTK
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select ARCH_REQUIRE_GPIOLIB
++ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
++ select MIPS_MACHINE
++
+ config MACH_ALCHEMY
+ bool "Alchemy processor based machines"
+
+@@ -597,6 +612,7 @@ config WR_PPMC
+
+ endchoice
+
++source "arch/mips/adm5120/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/emma/Kconfig"
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -176,6 +176,21 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre
+ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
+
+ #
++# Infineon/ADMtek ADM5120
++#
++libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/
++core-$(CONFIG_ADM5120) += arch/mips/adm5120/common/
++core-$(CONFIG_ADM5120_OEM_CELLVISION) += arch/mips/adm5120/cellvision/
++core-$(CONFIG_ADM5120_OEM_COMPEX) += arch/mips/adm5120/compex/
++core-$(CONFIG_ADM5120_OEM_EDIMAX) += arch/mips/adm5120/edimax/
++core-$(CONFIG_ADM5120_OEM_INFINEON) += arch/mips/adm5120/infineon/
++core-$(CONFIG_ADM5120_OEM_MIKROTIK) += arch/mips/adm5120/mikrotik/
++core-$(CONFIG_ADM5120_OEM_MOTOROLA) += arch/mips/adm5120/motorola/
++core-$(CONFIG_ADM5120_OEM_ZYXEL) += arch/mips/adm5120/zyxel/
++cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120
++load-$(CONFIG_ADM5120) += 0xffffffff80001000
++
++#
+ # Common Alchemy Au1x00 stuff
+ #
+ core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/
--- /dev/null
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -540,5 +540,9 @@ config MTD_PLATRAM
+
+ This selection automatically selects the map_ram driver.
+
++config MTD_ADM5120
++ tristate "Map driver for ADM5120 based boards"
++ depends on ADM5120
++
+ endmenu
+
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI) += pci.o
+ obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
++obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
+ obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312) += edb7312.o
+ obj-$(CONFIG_MTD_IMPA7) += impa7.o
--- /dev/null
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -602,6 +602,10 @@ config MIPS_AU1X00_ENET
+ If you have an Alchemy Semi AU1X00 based system
+ say Y. Otherwise, say N.
+
++config ADM5120_ENET
++ tristate "ADM5120 Ethernet switch support"
++ depends on ADM5120
++
+ config SGI_IOC3_ETH
+ bool "SGI IOC3 Ethernet"
+ depends on PCI && SGI_IP27
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -191,6 +191,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+ # This is also a 82596 and should probably be merged
+ obj-$(CONFIG_LP486E) += lp486e.o
+
++obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
+ obj-$(CONFIG_ETH16I) += eth16i.o
+ obj-$(CONFIG_ZORRO8390) += zorro8390.o
+ obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
--- /dev/null
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/
+ obj-$(CONFIG_USB_U132_HCD) += host/
+ obj-$(CONFIG_USB_R8A66597_HCD) += host/
+ obj-$(CONFIG_USB_HWA_HCD) += host/
++obj-$(CONFIG_USB_ADM5120_HCD) += host/
+
+ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -4,6 +4,10 @@
+ comment "USB Host Controller Drivers"
+ depends on USB
+
++config USB_ADM5120_HCD
++ tristate "ADM5120 HCD support (EXPERIMENTAL)"
++ depends on USB && ADM5120 && EXPERIMENTAL
++
+ config USB_C67X00_HCD
+ tristate "Cypress C67x00 HCD support"
+ depends on USB
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/
+
+ obj-$(CONFIG_PCI) += pci-quirks.o
+
++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
+ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
+ obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
+ obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
--- /dev/null
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc
+ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+ obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
++obj-$(CONFIG_ADM5120) += pci-adm5120.o
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -1723,6 +1723,9 @@
+ #define PCI_VENDOR_ID_ESDGMBH 0x12fe
+ #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+
++#define PCI_VENDOR_ID_ADMTEK 0x1317
++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
++
+ #define PCI_VENDOR_ID_SIIG 0x131f
+ #define PCI_SUBVENDOR_ID_SIIG 0x131f
+ #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -223,4 +223,12 @@ config LEDS_TRIGGER_NETDEV
+ This allows LEDs to be controlled by network device activity.
+ If unsure, say Y.
+
++config LEDS_TRIGGER_ADM5120_SWITCH
++ tristate "LED ADM5120 Switch Port Status Trigger"
++ depends on LEDS_TRIGGERS && ADM5120
++ help
++ This allows LEDs to be controlled by the port states of
++ the ADM5120 built-in Ethernet Switch
++ If unsure, say N.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -32,3 +32,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) +=
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+ obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
++obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
--- /dev/null
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -44,12 +44,19 @@
+ #define MANUFACTURER_AMD 0x0001
+ #define MANUFACTURER_ATMEL 0x001F
+ #define MANUFACTURER_SST 0x00BF
++#define MANUFACTURER_MACRONIX 0x00C2
+ #define SST49LF004B 0x0060
+ #define SST49LF040B 0x0050
+ #define SST49LF008A 0x005a
+ #define AT49BV6416 0x00d6
+ #define MANUFACTURER_SAMSUNG 0x00ec
+
++/* Macronix */
++#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
++#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
++#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
++#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
++
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -240,6 +247,41 @@ static void fixup_s29gl032n_sectors(stru
+ }
+ }
+
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++/*
++ * Some Macronix chips has no/bad bootblock information in the CFI table
++ */
++static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
++{
++ struct map_info *map = mtd->priv;
++ struct cfi_private *cfi = map->fldrv_priv;
++ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
++ __u8 t;
++
++ switch (cfi->id) {
++ /* TODO: put affected chip ids here */
++ case MX29LV160B:
++ case MX29LV320B:
++ t = 2; /* Bottom boot */
++ break;
++ case MX29LV160T:
++ case MX29LV320T:
++ t = 3; /* Top boot */
++ break;
++ default:
++ return;
++ }
++
++ if (extp->TopBottom == t)
++ /* boot location detected by the CFI layer is correct */
++ return;
++
++ extp->TopBottom = t;
++ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
++ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
++}
++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
++
+ static struct cfi_fixup cfi_fixup_table[] = {
+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+ #ifdef AMD_BOOTLOC_BUG
+@@ -275,6 +317,9 @@ static struct cfi_fixup fixup_table[] =
+ */
+ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
+ { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
++#endif
+ { 0, 0, NULL, NULL }
+ };
+
+--- a/drivers/mtd/chips/Kconfig
++++ b/drivers/mtd/chips/Kconfig
+@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
+ provides support for one of those command sets, used on chips
+ including the AMD Am29LV320.
+
++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
++ bool "Fix boot-block location for Macronix flash chips"
++ depends on MTD_CFI_AMDSTD
++ help
++ Some Macronix flash chips have no/wrong boot-block location in the
++ CFI table, and the driver may detect the type incorrectly. Select
++ this if your board has such chip.
++
+ config MTD_CFI_STAA
+ tristate "Support for ST (Advanced Architecture) flash chips"
+ depends on MTD_GEN_PROBE
--- /dev/null
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -128,6 +128,10 @@
+ #define UPD29F064115 0x221C
+
+ /* PMC */
++#define PM39LV512 0x001B
++#define PM39LV010 0x001C
++#define PM39LV020 0x003D
++#define PM39LV040 0x003E
+ #define PM49FL002 0x006D
+ #define PM49FL004 0x006E
+ #define PM49FL008 0x006A
+@@ -1248,6 +1252,54 @@ static const struct amd_flash_info jedec
+ ERASEINFO(0x02000,2),
+ ERASEINFO(0x04000,1),
+ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV512,
++ .name = "PMC Pm39LV512",
++ .devtypes = CFI_DEVICETYPE_X8,
++ .uaddr = MTD_UADDR_0x0555_0x02AA,
++ .dev_size = SIZE_64KiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x01000,16),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV010,
++ .name = "PMC Pm39LV010",
++ .devtypes = CFI_DEVICETYPE_X8,
++ .uaddr = MTD_UADDR_0x0555_0x02AA,
++ .dev_size = SIZE_128KiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x01000,32),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV020,
++ .name = "PMC Pm39LV020",
++ .devtypes = CFI_DEVICETYPE_X8,
++ .uaddr = MTD_UADDR_0x0555_0x02AA,
++ .dev_size = SIZE_256KiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x01000,64),
++ }
++ }, {
++ .mfr_id = MANUFACTURER_PMC,
++ .dev_id = PM39LV040,
++ .name = "PMC Pm39LV040",
++ .devtypes = CFI_DEVICETYPE_X8,
++ .uaddr = MTD_UADDR_0x0555_0x02AA,
++ .dev_size = SIZE_512KiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x01000,128),
++ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM49FL002,
--- /dev/null
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -55,6 +55,11 @@ config MTD_ROOTFS_SPLIT
+ depends on MTD_PARTITIONS
+ default y
+
++config MTD_TRXSPLIT
++ bool "Automatically find and split TRX partitions"
++ depends on MTD_PARTITIONS
++ default n
++
+ config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ depends on MTD_PARTITIONS
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o
+ mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
+
+ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
++obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
--- /dev/null
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
+ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
+ obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
+ obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
++obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
+ # Should be last but two libata driver
+ obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
+ # Should be last but one libata driver
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -567,6 +567,15 @@ config PATA_RADISYS
+
+ If unsure, say N.
+
++config PATA_RB153_CF
++ tristate "RouterBOARD 153 Compact Flash support"
++ depends on ADM5120_MACH_RB_153
++ help
++ This option enables support for a Compact Flash connected on
++ the RouterBOARD 153.
++
++ If unsure, say N.
++
+ config PATA_RB532
+ tristate "RouterBoard 532 PATA CompactFlash support"
+ depends on MIKROTIK_RB532
--- /dev/null
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -127,7 +127,12 @@
+ /*
+ * Reserved space for exception handlers.
+ * Necessary for machines which link their kernels at KSEG0.
++ * Use as temporary storage for the kernel command line, so that it
++ * can be updated easily without having to relink the kernel.
+ */
++
++EXPORT(_image_cmdline)
++ .ascii "CMDLINE:"
+ .fill 0x400
+ #endif
+
--- /dev/null
+--- a/drivers/serial/amba-pl010.c
++++ b/drivers/serial/amba-pl010.c
+@@ -50,11 +50,10 @@
+
+ #include <asm/io.h>
+
+-#define UART_NR 8
+-
+ #define SERIAL_AMBA_MAJOR 204
+ #define SERIAL_AMBA_MINOR 16
+-#define SERIAL_AMBA_NR UART_NR
++#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
++#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
+
+ #define AMBA_ISR_PASS_LIMIT 256
+
+@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+
+- cr = readb(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
+ cr &= ~UART010_CR_TIE;
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+
+ static void pl010_start_tx(struct uart_port *port)
+@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+
+- cr = readb(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
+ cr |= UART010_CR_TIE;
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+
+ static void pl010_stop_rx(struct uart_port *port)
+@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+
+- cr = readb(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
+ cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+
+ static void pl010_enable_ms(struct uart_port *port)
+@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+
+- cr = readb(uap->port.membase + UART010_CR);
++ cr = __raw_readl(uap->port.membase + UART010_CR);
+ cr |= UART010_CR_MSIE;
+- writel(cr, uap->port.membase + UART010_CR);
++ __raw_writel(cr, uap->port.membase + UART010_CR);
+ }
+
+ static void pl010_rx_chars(struct uart_amba_port *uap)
+@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a
+ struct tty_struct *tty = uap->port.info->port.tty;
+ unsigned int status, ch, flag, rsr, max_count = 256;
+
+- status = readb(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
+ while (UART_RX_DATA(status) && max_count--) {
+- ch = readb(uap->port.membase + UART01x_DR);
++ ch = __raw_readl(uap->port.membase + UART01x_DR);
+ flag = TTY_NORMAL;
+
+ uap->port.icount.rx++;
+@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
++ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+ if (unlikely(rsr & UART01x_RSR_ANY)) {
+- writel(0, uap->port.membase + UART01x_ECR);
++ __raw_writel(0, uap->port.membase + UART01x_ECR);
+
+ if (rsr & UART01x_RSR_BE) {
+ rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a
+ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+
+ ignore_char:
+- status = readb(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
+ }
+ spin_unlock(&uap->port.lock);
+ tty_flip_buffer_push(tty);
+@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a
+ int count;
+
+ if (uap->port.x_char) {
+- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
++ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
+ uap->port.icount.tx++;
+ uap->port.x_char = 0;
+ return;
+@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a
+
+ count = uap->port.fifosize >> 1;
+ do {
+- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
++ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uap->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua
+ {
+ unsigned int status, delta;
+
+- writel(0, uap->port.membase + UART010_ICR);
++ __raw_writel(0, uap->port.membase + UART010_ICR);
+
+- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+
+ delta = status ^ uap->old_status;
+ uap->old_status = status;
+@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo
+
+ spin_lock(&uap->port.lock);
+
+- status = readb(uap->port.membase + UART010_IIR);
++ status = __raw_readl(uap->port.membase + UART010_IIR);
+ if (status) {
+ do {
+ if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
+@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo
+ if (pass_counter-- == 0)
+ break;
+
+- status = readb(uap->port.membase + UART010_IIR);
++ status = __raw_readl(uap->port.membase + UART010_IIR);
+ } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
+ UART010_IIR_TIS));
+ handled = 1;
+@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo
+ static unsigned int pl010_tx_empty(struct uart_port *port)
+ {
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+- unsigned int status = readb(uap->port.membase + UART01x_FR);
++ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
+ return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
+ }
+
+@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru
+ unsigned int result = 0;
+ unsigned int status;
+
+- status = readb(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
+ if (status & UART01x_FR_DCD)
+ result |= TIOCM_CAR;
+ if (status & UART01x_FR_DSR)
+@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_
+ unsigned int lcr_h;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+- lcr_h = readb(uap->port.membase + UART010_LCRH);
++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
+ if (break_state == -1)
+ lcr_h |= UART01x_LCRH_BRK;
+ else
+ lcr_h &= ~UART01x_LCRH_BRK;
+- writel(lcr_h, uap->port.membase + UART010_LCRH);
++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+
+@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por
+ /*
+ * initialise the old status of the modem signals
+ */
+- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+
+ /*
+ * Finally, enable interrupts
+ */
+- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
++ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
+ uap->port.membase + UART010_CR);
+
+ return 0;
+@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p
+ /*
+ * disable all interrupts, disable the port
+ */
+- writel(0, uap->port.membase + UART010_CR);
++ __raw_writel(0, uap->port.membase + UART010_CR);
+
+ /* disable break condition and fifos */
+- writel(readb(uap->port.membase + UART010_LCRH) &
++ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
+ ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
+ uap->port.membase + UART010_LCRH);
+
+@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
++ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port
+ uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+ /* first, disable everything */
+- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
++ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
+
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ old_cr |= UART010_CR_MSIE;
+
+- writel(0, uap->port.membase + UART010_CR);
++ __raw_writel(0, uap->port.membase + UART010_CR);
+
+ /* Set baud rate */
+ quot -= 1;
+- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
+- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
++ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
++ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
+
+ /*
+ * ----------v----------v----------v----------v-----
+ * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * ----------^----------^----------^----------^-----
+ */
+- writel(lcr_h, uap->port.membase + UART010_LCRH);
+- writel(old_cr, uap->port.membase + UART010_CR);
++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
++ __raw_writel(old_cr, uap->port.membase + UART010_CR);
+
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops =
+ .verify_port = pl010_verify_port,
+ };
+
+-static struct uart_amba_port *amba_ports[UART_NR];
++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
+
+ #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
+
+@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct
+ unsigned int status;
+
+ do {
+- status = readb(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
+ barrier();
+ } while (!UART_TX_READY(status));
+- writel(ch, uap->port.membase + UART01x_DR);
++ __raw_writel(ch, uap->port.membase + UART01x_DR);
+ }
+
+ static void
+@@ -565,8 +564,8 @@ pl010_console_write(struct console *co,
+ /*
+ * First save the CR then disable the interrupts
+ */
+- old_cr = readb(uap->port.membase + UART010_CR);
+- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
++ old_cr = __raw_readl(uap->port.membase + UART010_CR);
++ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
+
+ uart_console_write(&uap->port, s, count, pl010_console_putchar);
+
+@@ -575,10 +574,10 @@ pl010_console_write(struct console *co,
+ * and restore the TCR
+ */
+ do {
+- status = readb(uap->port.membase + UART01x_FR);
++ status = __raw_readl(uap->port.membase + UART01x_FR);
+ barrier();
+ } while (status & UART01x_FR_BUSY);
+- writel(old_cr, uap->port.membase + UART010_CR);
++ __raw_writel(old_cr, uap->port.membase + UART010_CR);
+
+ clk_disable(uap->clk);
+ }
+@@ -587,9 +586,9 @@ static void __init
+ pl010_console_get_options(struct uart_amba_port *uap, int *baud,
+ int *parity, int *bits)
+ {
+- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
++ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
+ unsigned int lcr_h, quot;
+- lcr_h = readb(uap->port.membase + UART010_LCRH);
++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
+
+ *parity = 'n';
+ if (lcr_h & UART01x_LCRH_PEN) {
+@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am
+ else
+ *bits = 8;
+
+- quot = readb(uap->port.membase + UART010_LCRL) |
+- readb(uap->port.membase + UART010_LCRM) << 8;
++ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
++ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
+ *baud = uap->port.uartclk / (16 * (quot + 1));
+ }
+ }
+@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st
+ * if so, search for the first available port that does have
+ * console support.
+ */
+- if (co->index >= UART_NR)
++ if (co->index >= SERIAL_AMBA_NR)
+ co->index = 0;
+ uap = amba_ports[co->index];
+ if (!uap)
+@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st
+
+ static struct uart_driver amba_reg;
+ static struct console amba_console = {
+- .name = "ttyAM",
++ .name = SERIAL_AMBA_NAME,
+ .write = pl010_console_write,
+ .device = uart_console_device,
+ .setup = pl010_console_setup,
+@@ -657,11 +656,11 @@ static struct console amba_console = {
+
+ static struct uart_driver amba_reg = {
+ .owner = THIS_MODULE,
+- .driver_name = "ttyAM",
+- .dev_name = "ttyAM",
++ .driver_name = SERIAL_AMBA_NAME,
++ .dev_name = SERIAL_AMBA_NAME,
+ .major = SERIAL_AMBA_MAJOR,
+ .minor = SERIAL_AMBA_MINOR,
+- .nr = UART_NR,
++ .nr = SERIAL_AMBA_NR,
+ .cons = AMBA_CONSOLE,
+ };
+
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
+ an Integrator/AP or Integrator/PP2 platform, or if you have a
+- Cirrus Logic EP93xx CPU, say Y or M here.
++ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
+
+ If unsure, say N.
+
++config SERIAL_AMBA_PL010_NUMPORTS
++ int "Maximum number of AMBA PL010 serial ports"
++ depends on SERIAL_AMBA_PL010
++ default "8"
++ ---help---
++ Set this to the number of serial ports you want the AMBA PL010 driver
++ to support.
++
++config SERIAL_AMBA_PL010_PORTNAME
++ string "Name of the AMBA PL010 serial ports"
++ depends on SERIAL_AMBA_PL010
++ default "ttyAM"
++ ---help---
++ ::: To be written :::
++
+ config SERIAL_AMBA_PL010_CONSOLE
+ bool "Support for console on AMBA serial port"
+ depends on SERIAL_AMBA_PL010=y
--- /dev/null
+--- a/drivers/amba/bus.c
++++ b/drivers/amba/bus.c
+@@ -17,6 +17,10 @@
+ #include <asm/io.h>
+ #include <asm/sizes.h>
+
++#ifndef NO_IRQ
++#define NO_IRQ (-1)
++#endif
++
+ #define to_amba_device(d) container_of(d, struct amba_device, dev)
+ #define to_amba_driver(d) container_of(d, struct amba_driver, drv)
+
--- /dev/null
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -42,6 +42,12 @@ config PCI_DEBUG
+
+ When in doubt, say N.
+
++config PCI_DISABLE_COMMON_QUIRKS
++ bool "PCI disable common quirks"
++ depends on PCI
++ help
++ If you don't know what to do here, say N.
++
+ config HT_IRQ
+ bool "Interrupts on hypertransport devices"
+ default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -33,6 +33,7 @@ int pcie_mch_quirk;
+ EXPORT_SYMBOL(pcie_mch_quirk);
+
+ #ifdef CONFIG_PCI_QUIRKS
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+ * Mark this device with a broken_parity_status, to allow
+ * PCI scanning code to "skip" this now blacklisted device.
+@@ -1555,7 +1556,9 @@ static void __devinit fixup_rev1_53c810(
+ }
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -1945,6 +1948,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
+ quirk_msi_intx_disable_bug);
+
+ #endif /* CONFIG_PCI_MSI */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+
+ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
+ {
--- /dev/null
+--- a/drivers/leds/leds-gpio.c
++++ b/drivers/leds/leds-gpio.c
+@@ -43,13 +43,17 @@ static void gpio_led_set(struct led_clas
+ container_of(led_cdev, struct gpio_led_data, cdev);
+ int level;
+
+- if (value == LED_OFF)
+- level = 0;
+- else
+- level = 1;
+-
+- if (led_dat->active_low)
+- level = !level;
++ switch (value) {
++ case LED_OFF:
++ level = led_dat->active_low ? 1 : 0;
++ break;
++ case LED_FULL:
++ level = led_dat->active_low ? 0 : 1;
++ break;
++ default:
++ level = value;
++ break;
++ }
+
+ /* Setting GPIOs with I2C/etc requires a task context, and we don't
+ * seem to have a reliable way to know if we're already in one; so
--- /dev/null
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -696,6 +696,18 @@ config RC32434_WDT
+ To compile this driver as a module, choose M here: the
+ module will be called rc32434_wdt.
+
++config ADM5120_WDT
++ tristate "Infineon ADM5120 SoC hardware watchdog"
++ depends on WATCHDOG && ADM5120
++ help
++ This is a driver for hardware watchdog integrated in Infineon
++ ADM5120 SoC. This watchdog simply watches your kernel to make sure
++ it doesn't freeze, and if it does, it reboots your computer after a
++ certain amount of time.
++
++ To compile this driver as a module, choose M here: the module will be
++ called adm5120_wdt.
++
+ config INDYDOG
+ tristate "Indy/I2 Hardware Watchdog"
+ depends on SGI_HAS_INDYDOG
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
+
+ # PARISC Architecture
+
--- /dev/null
+--- a/drivers/usb/host/adm5120-drv.c
++++ b/drivers/usb/host/adm5120-drv.c
+@@ -174,7 +174,6 @@ static const struct hc_driver adm5120_hc
+ */
+ .hub_status_data = admhc_hub_status_data,
+ .hub_control = admhc_hub_control,
+- .hub_irq_enable = admhc_hub_irq_enable,
+ #ifdef CONFIG_PM
+ .bus_suspend = admhc_bus_suspend,
+ .bus_resume = admhc_bus_resume,
+--- a/drivers/usb/host/adm5120-hub.c
++++ b/drivers/usb/host/adm5120-hub.c
+@@ -63,20 +63,6 @@
+
+ /*-------------------------------------------------------------------------*/
+
+-/* hcd->hub_irq_enable() */
+-static void admhc_hub_irq_enable(struct usb_hcd *hcd)
+-{
+- struct admhcd *ahcd = hcd_to_admhcd(hcd);
+-
+- spin_lock_irq(&ahcd->lock);
+- if (!ahcd->autostop)
+- del_timer(&hcd->rh_timer); /* Prevent next poll */
+- admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
+- spin_unlock_irq(&ahcd->lock);
+-}
+-
+-/*-------------------------------------------------------------------------*/
+-
+ /* build "status change" packet (one or two bytes) from HC registers */
+
+ static int
+--- a/drivers/usb/host/adm5120-pm.c
++++ b/drivers/usb/host/adm5120-pm.c
+@@ -432,13 +432,17 @@ static inline int admhc_rh_resume(struct
+ static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
+ int any_connected)
+ {
+- int poll_rh = 1;
+-
+- /* keep on polling until RHSC is enabled */
++ /* If INSM is enabled, don't poll */
+ if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
+- poll_rh = 0;
++ return 0;
++
++ /* If no status changes are pending, enable status-change interrupts */
++ if (!changed) {
++ admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
++ return 0;
++ }
+
+- return poll_rh;
++ return 1;
+ }
+
+ #endif /* CONFIG_PM */
+--- a/drivers/usb/host/adm5120-hcd.c
++++ b/drivers/usb/host/adm5120-hcd.c
+@@ -46,7 +46,7 @@
+ #include "../core/hcd.h"
+ #include "../core/hub.h"
+
+-#define DRIVER_VERSION "0.25.0"
++#define DRIVER_VERSION "0.27.0"
+ #define DRIVER_AUTHOR "Gabor Juhos <juhosg@openwrt.org>"
+ #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver"
+
--- /dev/null
+--- a/drivers/mtd/trxsplit.c
++++ b/drivers/mtd/trxsplit.c
+@@ -18,7 +18,7 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+
+-#include <linux/byteorder/generic.h>
++//#include <linux/byteorder/generic.h>
+
+ #define PFX "trxsplit: "
+
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_ADM5120=y
+CONFIG_ADM5120_ENET=y
+CONFIG_ADM5120_MACH_P_334WT=y
+CONFIG_ADM5120_MACH_P_335=y
+# CONFIG_ADM5120_OEM_CELLVISION is not set
+# CONFIG_ADM5120_OEM_COMPEX is not set
+# CONFIG_ADM5120_OEM_EDIMAX is not set
+# CONFIG_ADM5120_OEM_INFINEON is not set
+# CONFIG_ADM5120_OEM_MIKROTIK is not set
+# CONFIG_ADM5120_OEM_MOTOROLA is not set
+CONFIG_ADM5120_OEM_ZYXEL=y
+CONFIG_ADM5120_SOC_BGA=y
+CONFIG_ADM5120_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_AMBA=y
+CONFIG_BASE_SMALL=0
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+# CONFIG_BCM47XX is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_BITREVERSE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FREEZER is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_COMPAT=y
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+# CONFIG_HID_PID is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IDE is not set
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=m
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+# CONFIG_JOLIET is not set
+CONFIG_KMOD=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+CONFIG_MII=m
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_ADM5120=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_TRXSPLIT=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_DEFRAG_IPV4=m
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
+CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SND_MIPS=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB=m
+CONFIG_USB_ADM5120_HCD=m
+CONFIG_USB_DEBUG=y
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_8139TOO is not set
+CONFIG_ADM5120=y
+CONFIG_ADM5120_ENET=y
+CONFIG_ADM5120_MACH_BR_6104K=y
+CONFIG_ADM5120_MACH_BR_6104KP=y
+CONFIG_ADM5120_MACH_BR_61X4WG=y
+CONFIG_ADM5120_MACH_CAS_771=y
+CONFIG_ADM5120_MACH_EASY5120P_ATA=y
+CONFIG_ADM5120_MACH_EASY5120_RT=y
+CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
+CONFIG_ADM5120_MACH_EASY83000=y
+CONFIG_ADM5120_MACH_NFS_101=y
+CONFIG_ADM5120_MACH_NP27G=y
+CONFIG_ADM5120_MACH_NP28G=y
+CONFIG_ADM5120_MACH_PMUGW=y
+CONFIG_ADM5120_MACH_RB_11X=y
+CONFIG_ADM5120_MACH_RB_133=y
+CONFIG_ADM5120_MACH_RB_133C=y
+CONFIG_ADM5120_MACH_RB_150=y
+CONFIG_ADM5120_MACH_RB_153=y
+CONFIG_ADM5120_MACH_RB_192=y
+CONFIG_ADM5120_MACH_WP54=y
+CONFIG_ADM5120_OEM_CELLVISION=y
+CONFIG_ADM5120_OEM_COMPEX=y
+CONFIG_ADM5120_OEM_EDIMAX=y
+CONFIG_ADM5120_OEM_INFINEON=y
+CONFIG_ADM5120_OEM_MIKROTIK=y
+CONFIG_ADM5120_OEM_MOTOROLA=y
+# CONFIG_ADM5120_OEM_ZYXEL is not set
+CONFIG_ADM5120_SOC_BGA=y
+CONFIG_ADM5120_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_AMBA=y
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+CONFIG_BRIDGE=m
+# CONFIG_BT is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit"
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FREEZER is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_COMPAT=y
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+# CONFIG_HID_PID is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_PCI=m
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IDE is not set
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_INPUT=m
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+# CONFIG_JOLIET is not set
+CONFIG_KEXEC=y
+CONFIG_KMOD=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEMOTE_FULONG is not set
+CONFIG_LLC=m
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+CONFIG_MII=m
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_ADM5120=y
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_TRXSPLIT=y
+# CONFIG_NATSEMI is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NO_HZ=y
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_RB153_CF=m
+# CONFIG_PATA_SCH is not set
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+# CONFIG_R6040 is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
+CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SND_MIPS=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SSB_POSSIBLE=y
+CONFIG_STP=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+# CONFIG_TC35815 is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB=m
+CONFIG_USB_ADM5120_HCD=m
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_YAFFS_9BYTE_TAGS=y
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_YAFFS_YAFFS1=y
+CONFIG_YAFFS_YAFFS2=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_ZONE_DMA_FLAG=0
projects / openwrt.git / commitdiff