--- /dev/null
+/*
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h> /* for unlink() */
+#include <libgen.h>
+#include <getopt.h> /* for getopt() */
+#include <stdarg.h>
+#include <errno.h>
+#include <sys/stat.h>
+
+#if (__BYTE_ORDER == __LITTLE_ENDIAN)
+# define HOST_TO_LE16(x) (x)
+# define HOST_TO_LE32(x) (x)
+# define LE16_TO_HOST(x) (x)
+# define LE32_TO_HOST(x) (x)
+#else
+# define HOST_TO_LE16(x) bswap_16(x)
+# define HOST_TO_LE32(x) bswap_32(x)
+# define LE16_TO_HOST(x) bswap_16(x)
+# define LE32_TO_HOST(x) bswap_32(x)
+#endif
+
+uint32_t crc32buf(char *buf, size_t len);
+
+/*
+ * Globals
+ */
+static char *ifname;
+static char *progname;
+static char *ofname;
+
+/*
+ * Message macros
+ */
+#define ERR(fmt, ...) do { \
+ fflush(0); \
+ fprintf(stderr, "[%s] *** error: " fmt "\n", \
+ progname, ## __VA_ARGS__ ); \
+} while (0)
+
+#define ERRS(fmt, ...) do { \
+ int save = errno; \
+ fflush(0); \
+ fprintf(stderr, "[%s] *** error: " fmt "\n", \
+ progname, ## __VA_ARGS__, strerror(save)); \
+} while (0)
+
+void usage(int status)
+{
+ FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
+ struct board_info *board;
+
+ fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
+ fprintf(stream,
+"\n"
+"Options:\n"
+" -i <file> read input from the file <file>\n"
+" -o <file> write output to the file <file>\n"
+" -h show this screen\n"
+ );
+
+ exit(status);
+}
+
+int main(int argc, char *argv[])
+{
+ int res = EXIT_FAILURE;
+ int buflen;
+ int err;
+ struct stat st;
+ char *buf;
+ uint32_t *hdr;
+ uint32_t crc;
+
+ FILE *outfile, *infile;
+
+ progname = basename(argv[0]);
+
+ while ( 1 ) {
+ int c;
+
+ c = getopt(argc, argv, "i:o:h");
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'i':
+ ifname = optarg;
+ break;
+ case 'o':
+ ofname = optarg;
+ break;
+ case 'h':
+ usage(EXIT_SUCCESS);
+ break;
+ default:
+ usage(EXIT_FAILURE);
+ break;
+ }
+ }
+
+ if (ifname == NULL) {
+ ERR("no input file specified");
+ goto err;
+ }
+
+ if (ofname == NULL) {
+ ERR("no output file specified");
+ goto err;
+ }
+
+ err = stat(ifname, &st);
+ if (err){
+ ERRS("stat failed on %s", ifname);
+ goto err;
+ }
+
+ buflen = st.st_size;
+ buf = malloc(buflen);
+ if (!buf) {
+ ERR("no memory for buffer\n");
+ goto err;
+ }
+
+ infile = fopen(ifname, "r");
+ if (infile == NULL) {
+ ERRS("could not open \"%s\" for reading", ifname);
+ goto err_free;
+ }
+
+ errno = 0;
+ fread(buf, buflen, 1, infile);
+ if (errno != 0) {
+ ERRS("unable to read from file %s", ifname);
+ goto err_close_in;
+ }
+
+ crc = crc32buf(buf, buflen);
+ hdr = (uint32_t *)buf;
+ *hdr = HOST_TO_LE32(crc);
+
+ outfile = fopen(ofname, "w");
+ if (outfile == NULL) {
+ ERRS("could not open \"%s\" for writing", ofname);
+ goto err_close_in;
+ }
+
+ errno = 0;
+ fwrite(buf, buflen, 1, outfile);
+ if (errno) {
+ ERRS("unable to write to file %s", ofname);
+ goto err_close_out;
+ }
+
+ res = EXIT_SUCCESS;
+
+ out_flush:
+ fflush(outfile);
+
+ err_close_out:
+ fclose(outfile);
+ if (res != EXIT_SUCCESS) {
+ unlink(ofname);
+ }
+
+ err_close_in:
+ fclose(infile);
+
+ err_free:
+ free(buf);
+
+ err:
+ return res;
+}
+
+/**********************************************************************/
+/* The following was grabbed and tweaked from the old snippets collection
+ * of public domain C code. */
+
+/**********************************************************************\
+|* Demonstration program to compute the 32-bit CRC used as the frame *|
+|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
+|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
+|* protocol). The 32-bit FCS was added via the Federal Register, *|
+|* 1 June 1982, p.23798. I presume but don't know for certain that *|
+|* this polynomial is or will be included in CCITT V.41, which *|
+|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
+|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
+|* errors by a factor of 10^-5 over 16-bit FCS. *|
+\**********************************************************************/
+
+/* Copyright (C) 1986 Gary S. Brown. You may use this program, or
+ code or tables extracted from it, as desired without restriction.*/
+
+/* First, the polynomial itself and its table of feedback terms. The */
+/* polynomial is */
+/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
+/* Note that we take it "backwards" and put the highest-order term in */
+/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
+/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
+/* the MSB being 1. */
+
+/* Note that the usual hardware shift register implementation, which */
+/* is what we're using (we're merely optimizing it by doing eight-bit */
+/* chunks at a time) shifts bits into the lowest-order term. In our */
+/* implementation, that means shifting towards the right. Why do we */
+/* do it this way? Because the calculated CRC must be transmitted in */
+/* order from highest-order term to lowest-order term. UARTs transmit */
+/* characters in order from LSB to MSB. By storing the CRC this way, */
+/* we hand it to the UART in the order low-byte to high-byte; the UART */
+/* sends each low-bit to hight-bit; and the result is transmission bit */
+/* by bit from highest- to lowest-order term without requiring any bit */
+/* shuffling on our part. Reception works similarly. */
+
+/* The feedback terms table consists of 256, 32-bit entries. Notes: */
+/* */
+/* 1. The table can be generated at runtime if desired; code to do so */
+/* is shown later. It might not be obvious, but the feedback */
+/* terms simply represent the results of eight shift/xor opera- */
+/* tions for all combinations of data and CRC register values. */
+/* */
+/* 2. The CRC accumulation logic is the same for all CRC polynomials, */
+/* be they sixteen or thirty-two bits wide. You simply choose the */
+/* appropriate table. Alternatively, because the table can be */
+/* generated at runtime, you can start by generating the table for */
+/* the polynomial in question and use exactly the same "updcrc", */
+/* if your application needn't simultaneously handle two CRC */
+/* polynomials. (Note, however, that XMODEM is strange.) */
+/* */
+/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
+/* of course, 32-bit entries work OK if the high 16 bits are zero. */
+/* */
+/* 4. The values must be right-shifted by eight bits by the "updcrc" */
+/* logic; the shift must be unsigned (bring in zeroes). On some */
+/* hardware you could probably optimize the shift in assembler by */
+/* using byte-swap instructions. */
+
+static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
+0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
+0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
+0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
+
+uint32_t crc32buf(char *buf, size_t len)
+{
+ uint32_t crc;
+
+ crc = 0xFFFFFFFF;
+
+ for ( ; len; --len, ++buf)
+ {
+ crc = UPDC32(*buf, crc);
+ }
+
+ return crc ^ 0xFFFFFFFF;
+}
+
projects / openwrt.git / commitdiff