ar71xx: add support for the WNDR3700v2 board

Based on a patch by Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25118 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
new file mode 100644 (file)
index 0000000..d05fdf3
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network
@@ -0,0 +1,69 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0.1
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
+
+config interface wan
+       option ifname   eth1
+       option proto    dhcp
+
+config switch
+       option name     rtl8366s
+       option reset    1
+       option enable_vlan 1
+       # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+       option blinkrate        2
+
+config switch_vlan
+       option device   rtl8366s
+       option vlan     1
+       option ports    "0 1 2 3 5t"
+
+config switch_port
+       # Port 1 controls the GREEN configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+       # 14: Link (master); 15: separate register
+
+       option device           rtl8366s
+       option port             1
+       option led              6
+
+config switch_port
+       # Port 2 controls the ORANGE configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       
+       option device           rtl8366s
+       option port             2
+       option led              9
+
+config switch_port                                              
+       # Port 5 controls the configuration of the WAN LED and the
+       # section does not correspond to a real switch port.
+       #
+       # To toggle the use of green or orange LEDs for the WAN port,
+       # see the LED setting for wndr3700:green:wan in /etc/config/system.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+
+       option device           rtl8366s
+       option port             5
+       option led              2

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 2337044..dd47cf3 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -105,7 +105,7 @@ get_status_led() {
        unifi)
                status_led="ubnt:green:dome"
                ;;
-       wndr3700)
+       wndr3700 | wndr3700v2)
                status_led="wndr3700:green:power"
                ;;
        wnr2000)

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
index a893a0e..77fd057 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700
@@ -23,6 +23,6 @@ commit system
 EOF
 }
 
-if [ "${board}" == "wndr3700" ]; then
+if [ "${board}" == "wndr3700" -o "${board}" == "wndr3700v2" ]; then
        wndr3700_set_wan_led
 fi

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index c088605..d390f9f 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -130,6 +130,9 @@ ar71xx_board_name() {
        *WNDR3700)
                name="wndr3700"
                ;;
+       *WNDR3700v2)
+               name="wndr3700v2"
+               ;;
        *WNR2000)
                name="wnr2000"
                ;;

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 0b867c0..067fe03 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -64,6 +64,7 @@ platform_do_upgrade_combined() {
 platform_check_image() {
        local board=$(ar71xx_board_name)
        local magic="$(get_magic_word "$1")"
+       local magic_long="$(get_magic_long "$1")"
 
        [ "$ARGC" -gt 1 ] && return 1
 
@@ -83,7 +84,14 @@ platform_check_image() {
                return 0
                ;;
        wndr3700)
-               [ "$magic" != "3337" ] && {
+               [ "$magic_long" != "33373030" ] && {
+                       echo "Invalid image type."
+                       return 1
+               }
+               return 0
+               ;;
+       wndr3700v2)
+               [ "$magic_long" != "33373031" ] && {
                        echo "Invalid image type."
                        return 1
                }

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
index 7b1ee90..f0b7819 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c
@@ -96,14 +96,64 @@ static struct mtd_partition wndr3700_partitions[] = {
                .mask_flags     = MTD_WRITEABLE,
        }
 };
-#endif /* CONFIG_MTD_PARTITIONS */
 
-static struct flash_platform_data wndr3700_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
-       .parts          = wndr3700_partitions,
-       .nr_parts       = ARRAY_SIZE(wndr3700_partitions),
-#endif
+static struct mtd_partition wndr3700v2_partitions[] = {
+       {
+               .name           = "uboot",
+               .offset         = 0,
+               .size           = 0x050000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "env",
+               .offset         = 0x050000,
+               .size           = 0x020000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "rootfs",
+               .offset         = 0x070000,
+               .size           = 0xe40000,
+       }, {
+               .name           = "config",
+               .offset         = 0xeb0000,
+               .size           = 0x010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "config_bak",
+               .offset         = 0xec0000,
+               .size           = 0x010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "pot",
+               .offset         = 0xed0000,
+               .size           = 0x010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "traffic_meter",
+               .offset         = 0xee0000,
+               .size           = 0x010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "language",
+               .offset         = 0xef0000,
+               .size           = 0x100000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "caldata",
+               .offset         = 0xff0000,
+               .size           = 0x010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }
 };
+#define wndr3700_num_partitions                ARRAY_SIZE(wndr3700_partitions)
+#define wndr3700v2_num_partitions      ARRAY_SIZE(wndr3700v2_partitions)
+#else
+#define wndr3700_partitions            NULL
+#define wndr3700_num_partitions                0
+#define wndr3700v2_partitions          NULL
+#define wndr3700v2_num_partitions      0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wndr3700_flash_data;
 
 static struct gpio_led wndr3700_leds_gpio[] __initdata = {
        {
@@ -167,7 +217,7 @@ static struct platform_device wndr3700_rtl8366s_device = {
        }
 };
 
-static void __init wndr3700_setup(void)
+static void __init wndr3700_common_setup(void)
 {
        u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 
@@ -218,5 +268,22 @@ static void __init wndr3700_setup(void)
                      art + WNDR3700_WMAC1_MAC_OFFSET);
 }
 
+static void __init wndr3700_setup(void)
+{
+       wndr3700_flash_data.parts = wndr3700_partitions,
+       wndr3700_flash_data.nr_parts = wndr3700_num_partitions,
+       wndr3700_common_setup();
+}
+
 MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700",
             wndr3700_setup);
+
+static void __init wndr3700v2_setup(void)
+{
+       wndr3700_flash_data.parts = wndr3700v2_partitions,
+       wndr3700_flash_data.nr_parts = wndr3700v2_num_partitions,
+       wndr3700_common_setup();
+}
+
+MIPS_MACHINE(AR71XX_MACH_WNDR3700V2, "WNDR3700v2", "NETGEAR WNDR3700v2",
+            wndr3700v2_setup);

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
index 2a233d7..40f1b09 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
@@ -54,6 +54,7 @@ enum ar71xx_mach_type {
        AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
        AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
        AR71XX_MACH_WNDR3700,   /* NETGEAR WNDR3700 */
+       AR71XX_MACH_WNDR3700V2, /* NETGEAR WNDR3700v2 */
        AR71XX_MACH_WNR2000,    /* NETGEAR WNR2000 */
        AR71XX_MACH_WP543,      /* Compex WP543 */
        AR71XX_MACH_WRT160NL,   /* Linksys WRT160NL */