static unsigned int ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info);
static void tx_int (struct ifx_ssc_port *);
static int ifx_ssc1_read_proc (char *, char **, off_t, int, int *, void *);
-static void ifx_gpio_init (void);
extern unsigned int danube_get_fpi_hz (void);
extern void mask_and_ack_danube_irq (unsigned int irq_nr);
(info->txbuf != info->txbuf_ptr) ||
(info->txbuf_end != len + info->txbuf)) {
local_irq_restore (flags);
- printk ("IFX SSC - %s: write must be called before calling " "read in combined RX/TX!\n", __FUNCTION__);
+ printk ("IFX SSC - %s: write must be called before calling " "read in combined RX/TX!\n", __func__);
return -EFAULT;
}
local_irq_restore (flags);
int idx;
struct ifx_ssc_port *info;
-/*
- if (len == 0)
- return (0);
-*/
idx = MINOR (filp->f_dentry->d_inode->i_rdev);
info = &isp[idx];
unsigned long tmp;
// check parameters
- if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) ||
- (info->frm_opts.DataLength < 1) ||
- (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) ||
- (info->frm_opts.PauseLength < 1) ||
- ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >>
- IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) !=
- 0)
- ||
- ((info->frm_opts.
- IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >>
- IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0))
+ if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX)
+ || (info->frm_opts.DataLength < 1)
+ || (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX)
+ || (info->frm_opts.PauseLength < 1)
+ || (info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET))
+ || (info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)))
return -EINVAL;
// read interrupt bits (they're not changed here)
tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON) &
- (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE |
- IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
+ (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
// set all values with respect to it's bit position (for data and pause
// length set N-1)
- tmp = (info->frm_opts.DataLength -
- 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
- tmp |= (info->frm_opts.PauseLength -
- 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
+ tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
+ tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE;
tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE;
- WRITE_PERIPHERAL_REGISTER (tmp, info->mapbase + IFX_SSC_SFCON);
+ WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON);
return 0;
}
{
unsigned long tmp;
- // check parameters
if (!(info) || (val & ~(IFX_SSC_MODE_MASK)))
return -EINVAL;
- /*check BUSY and RXCNT */
- if (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) &
- IFX_SSC_STATE_BUSY
- || READ_PERIPHERAL_REGISTER (info->mapbase +
- IFX_SSC_RXCNT) &
- IFX_SSC_RXCNT_TODO_MASK)
+
+ if ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY)
+ || (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK))
return -EBUSY;
- // modify
- tmp = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) &
- ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
+
+ tmp = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) & ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
WRITE_PERIPHERAL_REGISTER (tmp, info->mapbase + IFX_SSC_CON);
info->opts.modeRxTx = val;
- return 0;
-}
-
-void
-ifx_gpio_init (void)
-{
- /* TODO: P0.9 SPI_CS4, P0.10 SPI_CS5, P 0.11 SPI_CS6, because of ASC0 */
- /* p0.15 SPI_CS1(EEPROM), P0.13 SPI_CS3, */
- /* Set p0.15 to alternative 01, others to 00 (In/OUT) */
- *(DANUBE_GPIO_P0_DIR) = (*DANUBE_GPIO_P0_DIR) | (0xA000);
- *(DANUBE_GPIO_P0_ALTSEL0) =
- (((*DANUBE_GPIO_P0_ALTSEL0) | (0x8000)) & (~(0x2000)));
- *(DANUBE_GPIO_P0_ALTSEL1) =
- (((*DANUBE_GPIO_P0_ALTSEL1) & (~0x8000)) & (~(0x2000)));
- *(DANUBE_GPIO_P0_OD) = (*DANUBE_GPIO_P0_OD) | 0xA000;
-
- /* p1.6 SPI_CS2(SFLASH), p1.0 SPI_DIN, p1.1 SPI_DOUT, p1.2 SPI_CLK */
- *(DANUBE_GPIO_P1_DIR) = ((*DANUBE_GPIO_P1_DIR) | (0x46)) & (~1);
- *(DANUBE_GPIO_P1_ALTSEL0) = ((*DANUBE_GPIO_P1_ALTSEL0) | (0x47));
- *(DANUBE_GPIO_P1_ALTSEL1) = (*DANUBE_GPIO_P1_ALTSEL1) & (~0x47);
- *(DANUBE_GPIO_P1_OD) = (*DANUBE_GPIO_P1_OD) | 0x0046;
-
- /*CS3 */
- /*TODO: CS4 CS5 CS6 */
- *DANUBE_GPIO_P0_OUT = ((*DANUBE_GPIO_P0_OUT) | 0x2000);
+ return 0;
}
static int
unsigned long flags, bits;
struct ifx_ssc_hwopts *opts = &info->opts;
- /* sanity checks */
- if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) ||
- (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) {
- printk ("%s: sanity check failed\n", __FUNCTION__);
+ if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH)
+ || (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH))
return -EINVAL;
- }
+
bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET;
bits |= IFX_SSC_CON_ENABLE_BYTE_VALID;
- // if (opts->abortErrDetect)
- // bits |= IFX_SSC_CON_ABORT_ERR_CHECK;
+
if (opts->rxOvErrDetect)
bits |= IFX_SSC_CON_RX_OFL_CHECK;
if (opts->rxUndErrDetect)
bits |= IFX_SSC_CON_LATCH_THEN_SHIFT;
if (opts->clockPolarity)
bits |= IFX_SSC_CON_CLOCK_FALL;
- switch (opts->modeRxTx) {
+
+ switch (opts->modeRxTx)
+ {
case IFX_SSC_MODE_TX:
bits |= IFX_SSC_CON_RX_OFF;
break;
case IFX_SSC_MODE_RX:
bits |= IFX_SSC_CON_TX_OFF;
break;
- } // switch (opts->modeRxT)
+ }
+
local_irq_save (flags);
+
WRITE_PERIPHERAL_REGISTER (bits, info->mapbase + IFX_SSC_CON);
- WRITE_PERIPHERAL_REGISTER ((info->opts.
- gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) |
- (info->opts.
- gpoInv << IFX_SSC_GPOCON_INVOUT0_POS),
- info->mapbase + IFX_SSC_GPOCON);
- /*TODO: disable cs */
- WRITE_PERIPHERAL_REGISTER (info->opts.
- gpoCs << IFX_SSC_WHBGPOSTAT_SETOUT0_POS,
- info->mapbase + IFX_SSC_WHBGPOSTAT);
+ WRITE_PERIPHERAL_REGISTER ((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) |
+ (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), info->mapbase + IFX_SSC_GPOCON);
+
+ WRITE_PERIPHERAL_REGISTER (info->opts.gpoCs << IFX_SSC_WHBGPOSTAT_SETOUT0_POS, info->mapbase + IFX_SSC_WHBGPOSTAT);
//master mode
- if (opts->masterSelect) {
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_MASTER_SELECT,
- info->mapbase + IFX_SSC_WHBSTATE);
- }
- else {
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,
- info->mapbase + IFX_SSC_WHBSTATE);
- }
+ if (opts->masterSelect)
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE);
+ else
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE);
+
// init serial framing
WRITE_PERIPHERAL_REGISTER (0, info->mapbase + IFX_SSC_SFCON);
/* set up the port pins */
//check for general requirements to switch (external) pad/pin characteristics
- ifx_gpio_init ();
+ /* TODO: P0.9 SPI_CS4, P0.10 SPI_CS5, P 0.11 SPI_CS6, because of ASC0 */
+ /* p0.15 SPI_CS1(EEPROM), P0.13 SPI_CS3, */
+ /* Set p0.15 to alternative 01, others to 00 (In/OUT) */
+ *(DANUBE_GPIO_P0_DIR) = (*DANUBE_GPIO_P0_DIR) | (0xA000);
+ *(DANUBE_GPIO_P0_ALTSEL0) = (((*DANUBE_GPIO_P0_ALTSEL0) | (0x8000)) & (~(0x2000)));
+ *(DANUBE_GPIO_P0_ALTSEL1) = (((*DANUBE_GPIO_P0_ALTSEL1) & (~0x8000)) & (~(0x2000)));
+ *(DANUBE_GPIO_P0_OD) = (*DANUBE_GPIO_P0_OD) | 0xA000;
+
+ /* p1.6 SPI_CS2(SFLASH), p1.0 SPI_DIN, p1.1 SPI_DOUT, p1.2 SPI_CLK */
+ *(DANUBE_GPIO_P1_DIR) = ((*DANUBE_GPIO_P1_DIR) | (0x46)) & (~1);
+ *(DANUBE_GPIO_P1_ALTSEL0) = ((*DANUBE_GPIO_P1_ALTSEL0) | (0x47));
+ *(DANUBE_GPIO_P1_ALTSEL1) = (*DANUBE_GPIO_P1_ALTSEL1) & (~0x47);
+ *(DANUBE_GPIO_P1_OD) = (*DANUBE_GPIO_P1_OD) | 0x0046;
+
+ /*CS3 */
+ /*TODO: CS4 CS5 CS6 */
+ *DANUBE_GPIO_P0_OUT = ((*DANUBE_GPIO_P0_OUT) | 0x2000);
+
local_irq_restore (flags);
return 0;
unsigned int br;
unsigned long flags;
bool enabled;
+ int retval = 0;
- ifx_ssc_clock = ifx_ssc_get_kernel_clk (info);
+ ifx_ssc_clock = ifx_ssc_get_kernel_clk(info);
if (ifx_ssc_clock == 0)
- return -EINVAL;
+ {
+ retval = -EINVAL;
+ goto out;
+ }
+
local_irq_save (flags);
- /* have to disable the SSC to set the baudrate */
- enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_IS_ENABLED) != 0;
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
- // compute divider
+ enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
br = (((ifx_ssc_clock >> 1) + baud / 2) / baud) - 1;
wmb();
- if (br > 0xffff ||
- ((br == 0) &&
- ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) &
- IFX_SSC_STATE_IS_MASTER) == 0))) {
+
+ if (br > 0xffff || ((br == 0) &&
+ ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_MASTER) == 0))) {
local_irq_restore (flags);
- printk ("%s: illegal baudrate %u\n", __FUNCTION__, baud);
+ printk ("%s: invalid baudrate %u\n", __func__, baud);
return -EINVAL;
}
+
WRITE_PERIPHERAL_REGISTER (br, info->mapbase + IFX_SSC_BR);
+
if (enabled)
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
- local_irq_restore (flags);
- return 0;
+ local_irq_restore(flags);
+
+out:
+ return retval;
}
static int
unsigned long flags;
bool enabled;
- /* have to disable the SSC */
- enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_IS_ENABLED) != 0;
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
+ enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
- if (ifx_ssc_sethwopts (info) < 0) {
- printk ("%s: setting the hardware options failed\n",
- __FUNCTION__);
+ if (ifx_ssc_sethwopts (info) < 0)
+ {
+ printk ("%s: setting the hardware options failed\n", __func__);
return -EINVAL;
}
- if (ifx_ssc_set_baud (info, info->baud) < 0) {
- printk ("%s: setting the baud rate failed\n", __FUNCTION__);
+ if (ifx_ssc_set_baud (info, info->baud) < 0)
+ {
+ printk ("%s: setting the baud rate failed\n", __func__);
return -EINVAL;
}
+
local_irq_save (flags);
+
/* TX FIFO */
- WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL <<
- IFX_SSC_XFCON_ITL_OFFSET) |
- IFX_SSC_XFCON_FIFO_ENABLE,
+ WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE,
info->mapbase + IFX_SSC_TXFCON);
/* RX FIFO */
- WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL <<
- IFX_SSC_XFCON_ITL_OFFSET) |
- IFX_SSC_XFCON_FIFO_ENABLE,
+ WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE,
info->mapbase + IFX_SSC_RXFCON);
+
local_irq_restore (flags);
+
if (enabled)
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
return 0;
}
int
-ifx_ssc_ioctl (struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long data)
+ifx_ssc_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data)
{
struct ifx_ssc_port *info;
int line, ret_val = 0;
unsigned long tmp;
int from_kernel = 0;
- if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1)) {
+ if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1))
+ {
from_kernel = 1;
line = (int) inode;
- }
- else
+ } else {
line = MINOR (filp->f_dentry->d_inode->i_rdev);
+ }
- /* don't use more minor devices than we can support */
if (line < 0 || line >= PORT_CNT)
return -ENXIO;
info = &isp[line];
- switch (cmd) {
+ switch (cmd)
+ {
case IFX_SSC_STATS_READ:
/* data must be a pointer to a struct ifx_ssc_statistics */
if (from_kernel)
nbytes = PORT_CNT * sizeof (struct ifx_ssc_port);
isp = (struct ifx_ssc_port *) kmalloc (nbytes, GFP_KERNEL);
if (isp == NULL) {
- printk ("%s: no memory for isp\n", __FUNCTION__);
+ printk ("%s: no memory for isp\n", __func__);
return (ret_val);
}
memset (isp, 0, nbytes);
ret_val =
request_irq(info->txirq, ifx_ssc_tx_int, SA_INTERRUPT, "ifx_ssc_tx", info);
if (ret_val) {
- printk ("%s: unable to get irq %d\n", __FUNCTION__,
+ printk ("%s: unable to get irq %d\n", __func__,
info->txirq);
local_irq_restore (flags);
goto errout;
ret_val =
request_irq(info->rxirq, ifx_ssc_rx_int, SA_INTERRUPT, "ifx_ssc_rx", info);
if (ret_val) {
- printk ("%s: unable to get irq %d\n", __FUNCTION__,
+ printk ("%s: unable to get irq %d\n", __func__,
info->rxirq);
local_irq_restore (flags);
goto irqerr;
ret_val =
request_irq(info->errirq, ifx_ssc_err_int, SA_INTERRUPT,"ifx_ssc_err", info);
if (ret_val) {
- printk ("%s: unable to get irq %d\n", __FUNCTION__,
+ printk ("%s: unable to get irq %d\n", __func__,
info->errirq);
local_irq_restore (flags);
goto irqerr;
info = &isp[i];
if (ifx_ssc_hwinit (info) < 0) {
printk ("%s: hardware init failed for port %d\n",
- __FUNCTION__, i);
+ __func__, i);
goto irqerr;
}
}
remove_proc_entry ("driver/ssc2", NULL);
}
-module_exit (ifx_ssc_cleanup_module);
-
-/* Module entry-points */
-module_init (ifx_ssc_init);
-
-#ifndef MODULE
-static int __init
-ifx_ssc_set_maj (char *str)
-{
- maj = simple_strtol (str, NULL, 0);
- return 1;
-}
+module_init(ifx_ssc_init);
+module_exit(ifx_ssc_cleanup_module);
-__setup ("ssc_maj=", ifx_ssc_set_maj);
-#endif /* !MODULE */
-#define DANUBE_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg)
-/* Brief: chip select enable
- */
inline int
ifx_ssc_cs_low (u32 pin)
{
int ret = 0;
- if ((ret =
- ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_CLR,
- (unsigned long) &pin))) {
- DANUBE_SSC_EMSG ("clear CS %d fails\n", pin);
- }
+ if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_CLR, (unsigned long) &pin)))
+ printk ("clear CS %d fails\n", pin);
wmb ();
+
return ret;
}
+EXPORT_SYMBOL(ifx_ssc_cs_low);
-EXPORT_SYMBOL (ifx_ssc_cs_low);
-/* Brief: chip select disable
- */
inline int
ifx_ssc_cs_high (u32 pin)
{
int ret = 0;
- if ((ret =
- ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_SET,
- (unsigned long) &pin))) {
- DANUBE_SSC_EMSG ("set CS %d fails\n", pin);
- }
+ if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_SET, (unsigned long) &pin)))
+ printk ("set CS %d fails\n", pin);
wmb ();
+
return ret;
}
+EXPORT_SYMBOL(ifx_ssc_cs_high);
-EXPORT_SYMBOL (ifx_ssc_cs_high);
-/* Brief: one SSC session
- * Parameter:
- * tx_buf
- * tx_len
- * rx_buf
- * rx_len
- * session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX
- * Return: >=0 number of bytes received (if rx_buf != 0) or transmitted
- * <0 error code
- * Description:
- * 0. copy data to internal buffer
- * 1. Write command
- * 2a. If SSC_SESSION_MODE_TXONLY, read tx_len data
- * 2b. If not Read back (tx_len + rx_len) data
- * 3. copy internal buffer to rx buf if necessary
- */
static int
ssc_session (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len)
{
char *ssc_tx_buf = NULL;
char *ssc_rx_buf = NULL;
-
-// volatile char ssc_tx_buf[128]={0};
-// volatile char ssc_rx_buf[128]={0};
-
int eff_size = 0;
u8 mode = 0;
if (tx_buf == NULL && tx_len == 0 && rx_buf == NULL && rx_len == 0) {
- DANUBE_SSC_EMSG ("invalid parameters\n");
+ printk ("invalid parameters\n");
ret = -EINVAL;
goto ssc_session_exit;
}
mode = IFX_SSC_MODE_RX;
}
else {
- DANUBE_SSC_EMSG ("invalid parameters\n");
+ printk ("invalid parameters\n");
ret = -EINVAL;
goto ssc_session_exit;
}
mode = IFX_SSC_MODE_TX;
}
else {
- DANUBE_SSC_EMSG ("invalid parameters\n");
+ printk ("invalid parameters\n");
ret = -EINVAL;
goto ssc_session_exit;
}
GFP_KERNEL);
}
if (ssc_tx_buf == NULL || ssc_rx_buf == NULL) {
- DANUBE_SSC_EMSG ("no memory for size of %d\n", eff_size);
+ printk ("no memory for size of %d\n", eff_size);
ret = -ENOMEM;
goto ssc_session_exit;
}
}
if (ret != eff_size) {
- DANUBE_SSC_EMSG ("ifx_ssc_write return %d\n", ret);
+ printk ("ifx_ssc_write return %d\n", ret);
goto ssc_session_exit;
}
ret = ifx_ssc_kread (0, ssc_rx_buf, eff_size);
if (ret != eff_size) {
- DANUBE_SSC_EMSG ("ifx_ssc_read return %d\n", ret);
+ printk ("ifx_ssc_read return %d\n", ret);
goto ssc_session_exit;
}
return ret;
}
-/* Brief: TX-RX session
- * Parameter:
- * tx_buf
- * tx_len
- * rx_buf
- * rx_len
- * Return: >=0 number of bytes received
- * <0 error code
- * Description:
- * 1. TX session
- * 2. RX session
- */
int
ifx_ssc_txrx (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len)
{
- return ssc_session (tx_buf, tx_len, rx_buf, rx_len);
+ return ssc_session(tx_buf, tx_len, rx_buf, rx_len);
}
+EXPORT_SYMBOL(ifx_ssc_txrx);
-EXPORT_SYMBOL (ifx_ssc_txrx);
-/* Brief: TX only session
- * Parameter:
- * tx_buf
- * tx_len
- * Return: >=0 number of bytes transmitted
- * <0 error code
- */
int
ifx_ssc_tx (char *tx_buf, u32 tx_len)
{
- return ssc_session (tx_buf, tx_len, NULL, 0);
+ return ssc_session(tx_buf, tx_len, NULL, 0);
}
+EXPORT_SYMBOL(ifx_ssc_tx);
-EXPORT_SYMBOL (ifx_ssc_tx);
-/* Brief: RX only session
- * Parameter:
- * rx_buf
- * rx_len
- * Return: >=0 number of bytes received
- * <0 error code
- */
int
ifx_ssc_rx (char *rx_buf, u32 rx_len)
{
- return ssc_session (NULL, 0, rx_buf, rx_len);
+ return ssc_session(NULL, 0, rx_buf, rx_len);
}
-
-EXPORT_SYMBOL (ifx_ssc_rx);
+EXPORT_SYMBOL(ifx_ssc_rx);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
projects / openwrt.git / commitdiff