ar71xx: move AP91 specific ethernet initialization into a separate file

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19750 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32
index b4c3d1f..1b7277c 100644 (file)
--- a/target/linux/ar71xx/config-2.6.32
+++ b/target/linux/ar71xx/config-2.6.32
@@ -6,6 +6,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG_FS is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 # CONFIG_AR7 is not set
+CONFIG_AR71XX_DEV_AP91_ETH=y
 CONFIG_AR71XX_DEV_AP91_PCI=y
 CONFIG_AR71XX_DEV_AP94_PCI=y
 CONFIG_AR71XX_DEV_AR913X_WMAC=y

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
index 50ae98f..5a6e4a3 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
@@ -21,6 +21,7 @@ config AR71XX_MACH_AP83
 
 config AR71XX_MACH_DIR_600_A1
        bool "D-Link DIR-600 rev. A1 support"
+       select AR71XX_DEV_AP91_ETH
        select AR71XX_DEV_AP91_PCI if PCI
        select AR71XX_DEV_M25P80
        select AR71XX_DEV_GPIO_BUTTONS
@@ -148,6 +149,7 @@ config AR71XX_MACH_MZK_W300NH
 config AR71XX_MACH_TL_WR741ND
        bool "TP-LINK TL-WR741ND support"
        select AR71XX_DEV_M25P80
+       select AR71XX_DEV_AP91_ETH
        select AR71XX_DEV_AP91_PCI if PCI
        select AR71XX_DEV_GPIO_BUTTONS
        select AR71XX_DEV_LEDS_GPIO
@@ -207,6 +209,9 @@ config AR71XX_DEV_M25P80
 config AR71XX_DEV_AP91_PCI
        def_bool n
 
+config AR71XX_DEV_AP91_ETH
+       def_bool n
+
 config AR71XX_DEV_AP94_PCI
        def_bool n
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
index 13b5c41..d8449f9 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
@@ -13,6 +13,7 @@ obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o
 obj-$(CONFIG_EARLY_PRINTK)             += early_printk.o
 obj-$(CONFIG_PCI)                      += pci.o
 
+obj-$(CONFIG_AR71XX_DEV_AP91_ETH)      += dev-ap91-eth.o
 obj-$(CONFIG_AR71XX_DEV_AP91_PCI)      += dev-ap91-pci.o
 obj-$(CONFIG_AR71XX_DEV_AP94_PCI)      += dev-ap94-pci.o
 obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC)   += dev-ar913x-wmac.o

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c
new file mode 100644 (file)
index 0000000..d8dca10
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.c
@@ -0,0 +1,39 @@
+/*
+ *  Atheros AP91 reference board ethernet initialization
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "devices.h"
+
+void __init ap91_eth_init(u8 *mac_addr)
+{
+       if (mac_addr)
+               ar71xx_set_mac_base(mac_addr);
+
+       /* WAN port */
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+       ar71xx_eth0_data.phy_mask = 0x0;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
+       ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
+       ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
+
+       /* LAN ports */
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+       ar71xx_eth1_data.phy_mask = 0x0;
+       ar71xx_eth1_data.speed = SPEED_1000;
+       ar71xx_eth1_data.duplex = DUPLEX_FULL;
+       ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+       ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+       ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
+
+       ar71xx_add_device_mdio(0x0);
+       ar71xx_add_device_eth(1);
+       ar71xx_add_device_eth(0);
+}

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.h b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.h
new file mode 100644 (file)
index 0000000..424e2ae
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/dev-ap91-eth.h
@@ -0,0 +1,21 @@
+/*
+ *  Atheros AP91 reference board ethernet initialization
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AP91_ETH_H
+#define _AR71XX_DEV_AP91_ETH_H
+
+#if defined(CONFIG_AR71XX_DEV_AP91_ETH)
+void ap91_eth_init(u8 *mac_addr) __init;
+#else
+static inline void ap91_eth_init(u8 *mac_addr) { }
+#endif
+
+#endif /* _AR71XX_DEV_AP91_ETH_H */
+

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
index 68f1822..f3fbada 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
@@ -16,6 +16,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ap91-eth.h"
 #include "dev-ap91-pci.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
@@ -110,30 +111,6 @@ static void __init dir_600_a1_setup(void)
        u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
        u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_set_mac_base(mac);
-       ar71xx_add_device_mdio(0x0);
-
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = 0x0;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
-       ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
-       ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
-
-       /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.phy_mask = 0x0;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
-       ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
-       ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
-
-       ar71xx_add_device_eth(1);
-       ar71xx_add_device_eth(0);
-
        ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
 
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
@@ -143,6 +120,7 @@ static void __init dir_600_a1_setup(void)
                                        ARRAY_SIZE(dir_600_a1_gpio_buttons),
                                        dir_600_a1_gpio_buttons);
 
+       ap91_eth_init(mac);
        ap91_pci_init(ee, NULL);
 }
 

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
index e5d9776..5ba654b 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
@@ -1,7 +1,7 @@
 /*
  *  TP-LINK TL-WR741ND board support
  *
- *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
@@ -16,6 +16,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
+#include "dev-ap91-eth.h"
 #include "dev-ap91-pci.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
@@ -98,30 +99,6 @@ static void __init tl_wr741nd_setup(void)
        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
        u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_set_mac_base(mac);
-       ar71xx_add_device_mdio(0x0);
-
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = 0x0;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
-       ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
-       ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
-
-       /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.phy_mask = 0x0;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
-       ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
-       ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
-
-       ar71xx_add_device_eth(1);
-       ar71xx_add_device_eth(0);
-
        ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
 
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
@@ -131,6 +108,7 @@ static void __init tl_wr741nd_setup(void)
                                        ARRAY_SIZE(tl_wr741nd_gpio_buttons),
                                        tl_wr741nd_gpio_buttons);
 
+       ap91_eth_init(mac);
        ap91_pci_init(ee, NULL);
 }
 MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",