atheros: add default uci configuration for ICPlus IP175C

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15329 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network
index fa97109..4f6ff61 100644 (file)
--- a/target/linux/atheros/base-files/etc/uci-defaults/network
+++ b/target/linux/atheros/base-files/etc/uci-defaults/network
@@ -1,11 +1,29 @@
 #!/bin/sh
 if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
 #!/bin/sh
 if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \

+     -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \

      -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
        uci batch <<EOF
 set network.lan.ifname=eth0.1
 set network.wan=interface
 set network.wan.ifname=eth0.2
 set network.wan.proto=dhcp
      -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
        uci batch <<EOF
 set network.lan.ifname=eth0.1
 set network.wan=interface
 set network.wan.ifname=eth0.2
 set network.wan.proto=dhcp

-commit network

 EOF
 fi
 EOF
 fi

+
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" ]; then
+       uci batch <<EOF
+set network.eth0=switch
+set network.eth0.reset=1
+set network.eth0.enable_vlan=1
+set network.eth0_1=switch_vlan
+set network.eth0_1.device=eth0
+set network.eth0_1.vlan=1
+set network.eth0_1.ports="0 1 2 3 5t"
+set network.eth0_2=switch_vlan
+set network.eth0_2.device=eth0
+set network.eth0_2.vlan=2
+set network.eth0_2.ports="4 5t"
+EOF
+fi
+
+uci commit network