[ixp4xx] move the latch-led driver into a separated patch
authorjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sat, 24 May 2008 07:14:13 +0000 (07:14 +0000)
committerjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Sat, 24 May 2008 07:14:13 +0000 (07:14 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11252 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch [new file with mode: 0644]
target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch

diff --git a/target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch
new file mode 100644 (file)
index 0000000..7733abc
--- /dev/null
@@ -0,0 +1,198 @@
+Index: linux-2.6.25.4/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.25.4.orig/drivers/leds/Kconfig
++++ linux-2.6.25.4/drivers/leds/Kconfig
+@@ -125,6 +125,12 @@ config LEDS_GPIO
+         outputs. To be useful the particular board must have LEDs
+         and they must be connected to the GPIO lines.
++config LEDS_LATCH
++      tristate "LED Support for Memory Latched LEDs"
++      depends on LEDS_CLASS
++      help
++              -- To Do --
++
+ config LEDS_CM_X270
+       tristate "LED Support for the CM-X270 LEDs"
+       depends on LEDS_CLASS && MACH_ARMCORE
+Index: linux-2.6.25.4/drivers/leds/leds-latch.c
+===================================================================
+--- /dev/null
++++ linux-2.6.25.4/drivers/leds/leds-latch.c
+@@ -0,0 +1,141 @@
++/*
++ * LEDs driver for Memory Latched Devices
++ *
++ * Copyright (C) 2008 Gateworks Corp.
++ * Chris Lang <clang@gateworks.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
++#include <asm/io.h>
++#include <linux/spinlock.h>
++
++static unsigned int mem_keep = 0xFF;
++static spinlock_t mem_lock;
++static unsigned char *iobase;
++
++struct latch_led_data {
++      struct led_classdev cdev;
++      struct work_struct work;
++      u8 new_level;
++      u8 bit;
++};
++
++static void latch_led_set(struct led_classdev *led_cdev,
++      enum led_brightness value)
++{
++      struct latch_led_data *led_dat =
++              container_of(led_cdev, struct latch_led_data, cdev);
++
++      spin_lock(mem_lock);
++
++      if (value == LED_OFF)
++              mem_keep |= (0x1 << led_dat->bit);
++      else
++              mem_keep &= ~(0x1 << led_dat->bit);
++
++      writeb(mem_keep, iobase);
++
++      spin_unlock(mem_lock);
++}
++
++static int latch_led_probe(struct platform_device *pdev)
++{
++      struct latch_led_platform_data *pdata = pdev->dev.platform_data;
++      struct latch_led *cur_led;
++      struct latch_led_data *leds_data, *led_dat;
++      int i, ret = 0;
++
++      if (!pdata)
++              return -EBUSY;
++
++      leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
++                              GFP_KERNEL);
++      if (!leds_data)
++              return -ENOMEM;
++
++      iobase = ioremap_nocache(pdata->mem, 0x1000);
++      writeb(0xFF, iobase);
++
++      for (i = 0; i < pdata->num_leds; i++) {
++              cur_led = &pdata->leds[i];
++              led_dat = &leds_data[i];
++
++              led_dat->cdev.name = cur_led->name;
++              led_dat->cdev.default_trigger = cur_led->default_trigger;
++              led_dat->cdev.brightness_set = latch_led_set;
++              led_dat->cdev.brightness = LED_OFF;
++              led_dat->bit = cur_led->bit;
++
++              ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++              if (ret < 0) {
++                      goto err;
++              }
++      }
++
++      platform_set_drvdata(pdev, leds_data);
++
++      return 0;
++
++err:
++      if (i > 0) {
++              for (i = i - 1; i >= 0; i--) {
++                      led_classdev_unregister(&leds_data[i].cdev);
++              }
++      }
++
++      kfree(leds_data);
++
++      return ret;
++}
++
++static int __devexit latch_led_remove(struct platform_device *pdev)
++{
++      int i;
++      struct latch_led_platform_data *pdata = pdev->dev.platform_data;
++      struct latch_led_data *leds_data;
++
++      leds_data = platform_get_drvdata(pdev);
++
++      for (i = 0; i < pdata->num_leds; i++) {
++              led_classdev_unregister(&leds_data[i].cdev);
++              cancel_work_sync(&leds_data[i].work);
++      }
++
++      kfree(leds_data);
++
++      return 0;
++}
++
++static struct platform_driver latch_led_driver = {
++      .probe          = latch_led_probe,
++      .remove         = __devexit_p(latch_led_remove),
++      .driver         = {
++              .name   = "leds-latch",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init latch_led_init(void)
++{
++      return platform_driver_register(&latch_led_driver);
++}
++
++static void __exit latch_led_exit(void)
++{
++      platform_driver_unregister(&latch_led_driver);
++}
++
++module_init(latch_led_init);
++module_exit(latch_led_exit);
++
++MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
++MODULE_DESCRIPTION("Latch LED driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.25.4/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.25.4.orig/drivers/leds/Makefile
++++ linux-2.6.25.4/drivers/leds/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_LEDS_H1940)             += leds-h1940.
+ obj-$(CONFIG_LEDS_COBALT_QUBE)                += leds-cobalt-qube.o
+ obj-$(CONFIG_LEDS_COBALT_RAQ)         += leds-cobalt-raq.o
+ obj-$(CONFIG_LEDS_GPIO)                       += leds-gpio.o
++obj-$(CONFIG_LEDS_LATCH)     += leds-latch.o
+ obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
+ obj-$(CONFIG_LEDS_CLEVO_MAIL)         += leds-clevo-mail.o
+ obj-$(CONFIG_LEDS_HP6XX)              += leds-hp6xx.o
+Index: linux-2.6.25.4/include/linux/leds.h
+===================================================================
+--- linux-2.6.25.4.orig/include/linux/leds.h
++++ linux-2.6.25.4/include/linux/leds.h
+@@ -136,5 +136,18 @@ struct gpio_led_platform_data {
+       struct gpio_led *leds;
+ };
++/* For the leds-latch driver */
++struct latch_led {
++      const char *name;
++      char *default_trigger;
++      unsigned  bit;
++};
++
++struct latch_led_platform_data {
++      int     num_leds;
++      u32     mem;
++      struct latch_led *leds;
++};
++
+ #endif                /* __LINUX_LEDS_H_INCLUDED */
index aba6284..f2732fe 100644 (file)
@@ -1,6 +1,7 @@
-diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
---- clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c    2008-05-20 09:18:21.000000000 -0700
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c  2008-05-20 09:31:55.000000000 -0700
+Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
++++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
 @@ -26,6 +26,7 @@
  # include <linux/eeprom.h>
  #endif
@@ -9,7 +10,7 @@ diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4
  #include <linux/i2c-gpio.h>
  
  #include <asm/types.h>
-@@ -172,6 +173,72 @@
+@@ -172,6 +173,72 @@ static struct platform_device avila_npec
        .dev.platform_data      = &avila_npec_data,
  };
  
@@ -82,7 +83,7 @@ diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4
  static struct platform_device *avila_devices[] __initdata = {
        &avila_i2c_gpio,
        &avila_flash,
-@@ -182,6 +249,8 @@
+@@ -182,6 +249,8 @@ static void __init avila_gw23xx_setup(vo
  {
        platform_device_register(&avila_npeb_device);
        platform_device_register(&avila_npec_device);
@@ -91,7 +92,7 @@ diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4
  }
  
  #ifdef CONFIG_SENSORS_EEPROM
-@@ -189,6 +258,8 @@
+@@ -189,6 +258,8 @@ static void __init avila_gw2342_setup(vo
  {
        platform_device_register(&avila_npeb_device);
        platform_device_register(&avila_npec_device);
@@ -100,7 +101,7 @@ diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4
  }
  
  static void __init avila_gw2345_setup(void)
-@@ -199,22 +270,30 @@
+@@ -199,22 +270,30 @@ static void __init avila_gw2345_setup(vo
  
        avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
        platform_device_register(&avila_npec_device);
@@ -131,7 +132,7 @@ diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4
  }
  
  static void __init avila_gw2355_setup(void)
-@@ -225,11 +304,29 @@
+@@ -225,11 +304,29 @@ static void __init avila_gw2355_setup(vo
  
        avila_npec_data.phy = 16;
        platform_device_register(&avila_npec_device);
@@ -161,181 +162,10 @@ diff -ruN clean/linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.25.4
  }
  
  static struct avila_board_info avila_boards[] __initdata = {
-diff -ruN clean/linux-2.6.25.4/drivers/leds/Kconfig linux-2.6.25.4/drivers/leds/Kconfig
---- clean/linux-2.6.25.4/drivers/leds/Kconfig  2008-05-15 08:00:12.000000000 -0700
-+++ linux-2.6.25.4/drivers/leds/Kconfig        2008-05-20 09:25:15.000000000 -0700
-@@ -113,6 +113,12 @@
-         outputs. To be useful the particular board must have LEDs
-         and they must be connected to the GPIO lines.
-+config LEDS_LATCH
-+      tristate "LED Support for Memory Latched LEDs"
-+      depends on LEDS_CLASS
-+      help
-+              -- To Do --
-+
- config LEDS_CM_X270
-       tristate "LED Support for the CM-X270 LEDs"
-       depends on LEDS_CLASS && MACH_ARMCORE
-diff -ruN clean/linux-2.6.25.4/drivers/leds/leds-latch.c linux-2.6.25.4/drivers/leds/leds-latch.c
---- clean/linux-2.6.25.4/drivers/leds/leds-latch.c     1969-12-31 16:00:00.000000000 -0800
-+++ linux-2.6.25.4/drivers/leds/leds-latch.c   2008-04-30 14:03:21.000000000 -0700
-@@ -0,0 +1,141 @@
-+/*
-+ * LEDs driver for Memory Latched Devices
-+ *
-+ * Copyright (C) 2008 Gateworks Corp.
-+ * Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <linux/spinlock.h>
-+
-+static unsigned int mem_keep = 0xFF;
-+static spinlock_t mem_lock;
-+static unsigned char *iobase;
-+
-+struct latch_led_data {
-+      struct led_classdev cdev;
-+      struct work_struct work;
-+      u8 new_level;
-+      u8 bit;
-+};
-+
-+static void latch_led_set(struct led_classdev *led_cdev,
-+      enum led_brightness value)
-+{
-+      struct latch_led_data *led_dat =
-+              container_of(led_cdev, struct latch_led_data, cdev);
-+
-+      spin_lock(mem_lock);
-+
-+      if (value == LED_OFF)
-+              mem_keep |= (0x1 << led_dat->bit);
-+      else
-+              mem_keep &= ~(0x1 << led_dat->bit);
-+
-+      writeb(mem_keep, iobase);
-+
-+      spin_unlock(mem_lock);
-+}
-+
-+static int latch_led_probe(struct platform_device *pdev)
-+{
-+      struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+      struct latch_led *cur_led;
-+      struct latch_led_data *leds_data, *led_dat;
-+      int i, ret = 0;
-+
-+      if (!pdata)
-+              return -EBUSY;
-+
-+      leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
-+                              GFP_KERNEL);
-+      if (!leds_data)
-+              return -ENOMEM;
-+
-+      iobase = ioremap_nocache(pdata->mem, 0x1000);
-+      writeb(0xFF, iobase);
-+
-+      for (i = 0; i < pdata->num_leds; i++) {
-+              cur_led = &pdata->leds[i];
-+              led_dat = &leds_data[i];
-+
-+              led_dat->cdev.name = cur_led->name;
-+              led_dat->cdev.default_trigger = cur_led->default_trigger;
-+              led_dat->cdev.brightness_set = latch_led_set;
-+              led_dat->cdev.brightness = LED_OFF;
-+              led_dat->bit = cur_led->bit;
-+
-+              ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+              if (ret < 0) {
-+                      goto err;
-+              }
-+      }
-+
-+      platform_set_drvdata(pdev, leds_data);
-+
-+      return 0;
-+
-+err:
-+      if (i > 0) {
-+              for (i = i - 1; i >= 0; i--) {
-+                      led_classdev_unregister(&leds_data[i].cdev);
-+              }
-+      }
-+
-+      kfree(leds_data);
-+
-+      return ret;
-+}
-+
-+static int __devexit latch_led_remove(struct platform_device *pdev)
-+{
-+      int i;
-+      struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+      struct latch_led_data *leds_data;
-+
-+      leds_data = platform_get_drvdata(pdev);
-+
-+      for (i = 0; i < pdata->num_leds; i++) {
-+              led_classdev_unregister(&leds_data[i].cdev);
-+              cancel_work_sync(&leds_data[i].work);
-+      }
-+
-+      kfree(leds_data);
-+
-+      return 0;
-+}
-+
-+static struct platform_driver latch_led_driver = {
-+      .probe          = latch_led_probe,
-+      .remove         = __devexit_p(latch_led_remove),
-+      .driver         = {
-+              .name   = "leds-latch",
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+static int __init latch_led_init(void)
-+{
-+      return platform_driver_register(&latch_led_driver);
-+}
-+
-+static void __exit latch_led_exit(void)
-+{
-+      platform_driver_unregister(&latch_led_driver);
-+}
-+
-+module_init(latch_led_init);
-+module_exit(latch_led_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("Latch LED driver");
-+MODULE_LICENSE("GPL");
-diff -ruN clean/linux-2.6.25.4/drivers/leds/Makefile linux-2.6.25.4/drivers/leds/Makefile
---- clean/linux-2.6.25.4/drivers/leds/Makefile 2008-05-15 08:00:12.000000000 -0700
-+++ linux-2.6.25.4/drivers/leds/Makefile       2008-05-20 09:26:14.000000000 -0700
-@@ -18,6 +18,7 @@
- obj-$(CONFIG_LEDS_COBALT_QUBE)                += leds-cobalt-qube.o
- obj-$(CONFIG_LEDS_COBALT_RAQ)         += leds-cobalt-raq.o
- obj-$(CONFIG_LEDS_GPIO)                       += leds-gpio.o
-+obj-$(CONFIG_LEDS_LATCH)     += leds-latch.o
- obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL)         += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX)              += leds-hp6xx.o
-diff -ruN clean/linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
---- clean/linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h   2008-05-15 08:00:12.000000000 -0700
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h 2008-05-20 09:22:28.000000000 -0700
+Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
++++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
 @@ -36,4 +36,6 @@
  #define AVILA_PCI_INTC_PIN    9
  #define AVILA_PCI_INTD_PIN    8
@@ -344,25 +174,3 @@ diff -ruN clean/linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h linux-2.6.25.
 +/* User LEDs */
 +#define AVILA_GW23XX_LED_USER_GPIO    3
 +#define AVILA_GW23X7_LED_USER_GPIO    4
-diff -ruN clean/linux-2.6.25.4/include/linux/leds.h linux-2.6.25.4/include/linux/leds.h
---- clean/linux-2.6.25.4/include/linux/leds.h  2008-05-15 08:00:12.000000000 -0700
-+++ linux-2.6.25.4/include/linux/leds.h        2008-05-20 09:32:35.000000000 -0700
-@@ -136,5 +136,18 @@
-       struct gpio_led *leds;
- };
-+/* For the leds-latch driver */
-+struct latch_led {
-+      const char *name;
-+      char *default_trigger;
-+      unsigned  bit;
-+};
-+
-+struct latch_led_platform_data {
-+      int     num_leds;
-+      u32     mem;
-+      struct latch_led *leds;
-+};
-+
- #endif                /* __LINUX_LEDS_H_INCLUDED */
This page took 0.034812 seconds and 4 git commands to generate.