CONFIG_PACKAGE_hostapd-mini \
CONFIG_PACKAGE_kmod-hostap
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
include $(INCLUDE_DIR)/package.mk
DRIVER_MAKEOPTS= \
$(call Package/hostapd/Default)
TITLE+= (full)
DEPENDS+= +PACKAGE_hostapd:libopenssl
+ VARIANT:=full
endef
-#define Package/hostapd/conffiles
-#/etc/hostapd.conf
-#endef
-
define Package/hostapd/description
This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
Authenticator.
define Package/hostapd-mini
$(call Package/hostapd/Default)
TITLE+= (WPA-PSK only)
+ VARIANT:=mini
endef
-#define Package/hostapd-mini/conffiles
-#/etc/hostapd.conf
-#endef
-
define Package/hostapd-mini/description
- This package contains a minimal IEEE 802.1x/WPA/EAP/RADIUS Authenticator
- (WPA-PSK only).
+ This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
endef
define Package/hostapd-utils
IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
endef
-define Build/ConfigureTarget
- rm -rf $(PKG_BUILD_DIR)/hostapd.$(1)
- mkdir -p $(PKG_BUILD_DIR)/hostapd.$(1)
- $(CP) \
- $(PKG_BUILD_DIR)/hostapd \
- $(PKG_BUILD_DIR)/src \
- $(PKG_BUILD_DIR)/hostapd.$(1)/
- $(CP) ./files/$(1).config $(PKG_BUILD_DIR)/hostapd.$(1)/hostapd/.config
+define Build/Configure
+ $(CP) ./files/$(BUILD_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
endef
TARGET_CPPFLAGS := \
-DCONFIG_LIBNL20 \
-D_GNU_SOURCE
-define Build/CompileTarget
+ifdef CONFIG_PACKAGE_kmod-mac80211
+ TARGET_LDFLAGS += -lm -lnl-tiny
+endif
+ifeq ($(BUILD_VARIANT),full)
+ TARGET_LDFLAGS += -lssl -lcrypto
+endif
+
+define Build/Compile
CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
- $(MAKE) -C $(PKG_BUILD_DIR)/hostapd.$(1)/hostapd \
+ $(MAKE) -C $(PKG_BUILD_DIR)/hostapd \
$(TARGET_CONFIGURE_OPTS) \
$(DRIVER_MAKEOPTS) \
- LIBS="$(TARGET_LDFLAGS) \
- $(if $(CONFIG_PACKAGE_kmod-mac80211),-lm -lnl-tiny) \
- $(if $(findstring default,$(1)),-lssl -lcrypto)" \
+ LIBS="$(TARGET_LDFLAGS)" \
hostapd hostapd_cli
- $(CP) $(PKG_BUILD_DIR)/hostapd.$(1)/hostapd/hostapd_cli $(PKG_BUILD_DIR)/
endef
define Package/InstallTemplate
- $(INSTALL_DIR) $$(1)/lib/wifi
- $(INSTALL_DATA) ./files/hostapd.sh $$(1)/lib/wifi/hostapd.sh
- $(INSTALL_DIR) $$(1)/usr/sbin
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd $$(1)/usr/sbin/
-# config is managed through uci
-# $(INSTALL_DIR) $$(1)/etc
-# $(INSTALL_CONF) $(PKG_BUILD_DIR)/hostapd.$(2)/hostapd/hostapd.conf $$(1)/etc/hostapd.conf
-endef
-
-define Package/Template
- ifneq ($(CONFIG_PACKAGE_$(1)),)
- define Build/Configure/$(2)
- $(call Build/ConfigureTarget,$(2))
- endef
- define Build/Compile/$(2)
- $(call Build/CompileTarget,$(2))
- endef
- define Package/$(1)/install
- $(call Package/InstallTemplate,$(1),$(2))
- endef
- endif
-endef
-
-define Build/Configure
- rm -f $(PKG_BUILD_DIR)/.configured*
- $(call Build/Configure/default)
- $(call Build/Configure/mini)
-endef
-
-define Build/Compile
- $(call Build/Compile/default)
- $(call Build/Compile/mini)
+ $(INSTALL_DIR) $(1)/lib/wifi
+ $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
endef
-define Build/Clean
- rm -rf $(PKG_BUILD_DIR)_default
- rm -rf $(PKG_BUILD_DIR)_mini
-endef
+ifeq ($(BUILD_VARIANT),full)
+ Package/hostapd/install = $(Package/InstallTemplate)
+else
+ Package/hostapd-mini/install = $(Package/InstallTemplate)
+endif
define Package/hostapd-utils/install
$(INSTALL_DIR) $(1)/usr/sbin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd_cli $(1)/usr/sbin/
endef
-$(eval $(call Package/Template,hostapd,default))
-$(eval $(call Package/Template,hostapd-mini,mini))
-
$(eval $(call BuildPackage,hostapd))
$(eval $(call BuildPackage,hostapd-mini))
$(eval $(call BuildPackage,hostapd-utils))
+++ /dev/null
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
--- /dev/null
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
projects / openwrt.git / commitdiff