+++ /dev/null
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-# [<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
+++ /dev/null
-#!/usr/bin/perl -w
-#
-# ciabot -- Mail a CVS log message to a given address, for the purposes of CIA
-#
-# Loosely based on cvslog by Russ Allbery <rra@stanford.edu>
-# Copyright 1998 Board of Trustees, Leland Stanford Jr. University
-#
-# Copyright 2001, 2003, 2004 Petr Baudis <pasky@ucw.cz>
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License version 2, as published by the
-# Free Software Foundation.
-#
-# The master location of this file is
-# http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl.
-#
-# This program is designed to run from the loginfo CVS administration file. It
-# takes a log message, massaging it and mailing it to the address given below.
-#
-# Its record in the loginfo file should look like:
-#
-# ALL $CVSROOT/CVSROOT/ciabot.pl %s $USER project from_email dest_email ignore_regexp
-#
-# Note that the last four parameters are optional, you can alternatively change
-# the defaults below in the configuration section.
-#
-# If it does not work, try to disable $xml_rpc in the configuration section
-# below.
-#
-# ciabot.pl,v 1.110 2004/01/09 17:40:13 pasky
-# $Id$
-
-use strict;
-use vars qw ($project $from_email $dest_email $rpc_uri $sendmail $sync_delay
- $xml_rpc $ignore_regexp $alt_local_message_target);
-
-
-
-
-### Configuration
-
-# Project name (as known to CIA).
-$project = 'ELinks';
-
-# The from address in generated mails.
-$from_email = 'pasky@ucw.cz';
-
-# Mail all reports to this address.
-$dest_email = 'cia@navi.cx';
-
-# If using XML-RPC, connect to this URI.
-$rpc_uri = 'http://cia.navi.cx/RPC2';
-
-# Path to your USCD sendmail compatible binary (your mailer daemon created this
-# program somewhere).
-$sendmail = '/usr/sbin/sendmail';
-
-# Number of seconds to wait for possible concurrent instances. CVS calls up
-# this script for each involved directory separately and this is the sync
-# delay. 5s looks as a safe value, but feel free to increase if you are running
-# this on a slower (or overloaded) machine or if you have really a lot of
-# directories.
-$sync_delay = 5;
-
-# This script can communicate with CIA either by mail or by an XML-RPC
-# interface. The XML-RPC interface is faster and more efficient, however you
-# need to have RPC::XML perl module installed, and some large CVS hosting sites
-# (like Savannah or Sourceforge) might not allow outgoing HTTP connections
-# while they allow outgoing mail. Also, this script will hang and eventually
-# not deliver the event at all if CIA server happens to be down, which is
-# unfortunately not an uncommon condition.
-$xml_rpc = 0;
-
-# You can make this bot to totally ignore events concerning the objects
-# specified below. Each object is composed of <module>/<path>/<filename>,
-# therefore file Manifest in root directory of module gentoo will be called
-# "gentoo/Manifest", while file src/bfu/inphist.c of module elinks will be
-# called "elinks/src/bfu/inphist.c". Easy, isn't it?
-#
-# This variable should contain regexp, against which will each object be
-# checked, and if the regexp is matched, the file is ignored. Therefore ie. to
-# ignore all changes in the two files above and everything concerning module
-# 'admin', use:
-#
-#$ignore_regexp = "^(gentoo/Manifest|elinks/src/bfu/inphist.c|admin/)";
-$ignore_regexp = "/Manifest\$";
-
-# It can be useful to also grab the generated XML message by some other
-# programs and ie. autogenerate some content based on it. Here you can specify
-# a file to which it will be appended.
-$alt_local_message_target = "";
-
-
-
-
-### The code itself
-
-use vars qw ($user $module $tag @files $logmsg $message);
-
-my @dir; # This array stores all the affected directories
-my @dirfiles; # This array is mapped to the @dir array and contains files
- # affected in each directory
-
-
-
-### Input data loading
-
-
-# These arguments are from %s; first the relative path in the repository
-# and then the list of files modified.
-
-@files = split (' ', ($ARGV[0] or ''));
-$dir[0] = shift @files or die "$0: no directory specified\n";
-$dirfiles[0] = "@files" or die "$0: no files specified\n";
-
-
-# Guess module name.
-
-$module = $dir[0]; $module =~ s#/.*##;
-
-
-# Figure out who is doing the update.
-
-$user = $ARGV[1];
-
-
-# Use the optional parameters, if supplied.
-
-$project = $ARGV[2] if $ARGV[2];
-$from_email = $ARGV[3] if $ARGV[3];
-$dest_email = $ARGV[4] if $ARGV[4];
-$ignore_regexp = $ARGV[5] if $ARGV[5];
-
-
-# Parse stdin (what's interesting is the tag and log message)
-
-while (<STDIN>) {
- $tag = $1 if /^\s*Tag: ([a-zA-Z0-9_-]+)/;
- last if /^Log Message/;
-}
-
-while (<STDIN>) {
- next unless ($_ and $_ ne "\n" and $_ ne "\r\n");
- s/&/&/g;
- s/</</g;
- s/>/>/g;
- $logmsg .= $_;
-}
-
-
-
-### Remove to-be-ignored files
-
-$dirfiles[0] = join (' ',
- grep {
- my $f = "$module/$dir[0]/$_";
- $f !~ m/$ignore_regexp/;
- } split (/\s+/, $dirfiles[0])
-) if ($ignore_regexp);
-exit unless $dirfiles[0];
-
-
-
-### Sync between the multiple instances potentially being ran simultanously
-
-my $sum; # _VERY_ simple hash of the log message. It is really weak, but I'm
- # lazy and it's really sorta exceptional to even get more commits
- # running simultanously anyway.
-map { $sum += ord $_ } split(//, $logmsg);
-
-my $syncfile; # Name of the file used for syncing
-$syncfile = "/tmp/cvscia.$project.$module.$sum";
-
-
-if (-f $syncfile and -w $syncfile) {
- # The synchronization file for this file already exists, so we are not the
- # first ones. So let's just dump what we know and exit.
-
- open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
- print FF "$dirfiles[0]!@!$dir[0]\n";
- close(FF);
- exit;
-
-} else {
- # We are the first one! Thus, we'll fork, exit the original instance, and
- # wait a bit with the new one. Then we'll grab what the others collected and
- # go on.
-
- # We don't need to care about permissions since all the instances of the one
- # commit will obviously live as the same user.
-
- # system("touch") in a different way
- open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
- close(FF);
-
- exit if (fork);
- sleep($sync_delay);
-
- open(FF, $syncfile);
- my ($dirnum) = 1; # 0 is the one we got triggerred for
- while (<FF>) {
- chomp;
- ($dirfiles[$dirnum], $dir[$dirnum]) = split(/!@!/);
- $dirnum++;
- }
- close(FF);
-
- unlink($syncfile);
-}
-
-
-
-### Compose the mail message
-
-
-my ($VERSION) = '$Revision$' =~ / (\d+\.\d+) /;
-my $ts = time;
-
-$message = <<EM
-<message>
- <generator>
- <name>CIA Perl client for CVS</name>
- <version>$VERSION</version>
- <url>http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl</url>
- </generator>
- <source>
- <project>$project</project>
- <module>$module</module>
-EM
-;
-$message .= " <branch>$tag</branch>" if ($tag);
-$message .= <<EM
- </source>
- <timestamp>
- $ts
- </timestamp>
- <body>
- <commit>
- <author>$user</author>
- <files>
-EM
-;
-
-for (my $dirnum = 0; $dirnum < @dir; $dirnum++) {
- map {
- $_ = $dir[$dirnum] . '/' . $_;
- s#^.*?/##; # weed out the module name
- s/&/&/g;
- s/</</g;
- s/>/>/g;
- $message .= " <file>$_</file>\n";
- } split(/ /, $dirfiles[$dirnum]);
-}
-
-$message .= <<EM
- </files>
- <log>
-$logmsg
- </log>
- </commit>
- </body>
-</message>
-EM
-;
-
-
-
-### Write the message to an alt-target
-
-if ($alt_local_message_target and open (ALT, ">>$alt_local_message_target")) {
- print ALT $message;
- close ALT;
-}
-
-
-
-### Send out the XML-RPC message
-
-
-if ($xml_rpc) {
- # We gotta be careful from now on. We silence all the warnings because
- # RPC::XML code is crappy and works with undefs etc.
- $^W = 0;
- $RPC::XML::ERROR if (0); # silence perl's compile-time warning
-
- require RPC::XML;
- require RPC::XML::Client;
-
- my $rpc_client = new RPC::XML::Client $rpc_uri;
- my $rpc_request = RPC::XML::request->new('hub.deliver', $message);
- my $rpc_response = $rpc_client->send_request($rpc_request);
-
- unless (ref $rpc_response) {
- die "XML-RPC Error: $RPC::XML::ERROR\n";
- }
- exit;
-}
-
-
-
-### Send out the mail
-
-
-# Open our mail program
-
-open (MAIL, "| $sendmail -t -oi -oem") or die "Cannot execute $sendmail : " . ($?>>8);
-
-
-# The mail header
-
-print MAIL <<EOM;
-From: $from_email
-To: $dest_email
-Content-type: text/xml
-Subject: DeliverXML
-
-EOM
-
-print MAIL $message;
-
-
-# Close the mail
-
-close MAIL;
-die "$0: sendmail exit status " . ($? >> 8) . "\n" unless ($? == 0);
-
-# vi: set sw=2:
+++ /dev/null
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list
-# of files to check. A non-zero exit of the filter program will
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
+++ /dev/null
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR
+++ /dev/null
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-# wildcard [option value][option value]...
-#
-# where option is one of
-# -f from cvs filter value: path to filter
-# -t to cvs filter value: path to filter
-# -m update methodology value: MERGE or COPY
-# -k expansion mode value: b, o, kkv, &c
-#
-# and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'
+++ /dev/null
-# The "editinfo" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
+++ /dev/null
-# The "loginfo" file controls where "cvs commit" log information
-# is sent. The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT. If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter. The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators. The format
-# characters are:
-#
-# s = file name
-# V = old version number (pre-checkin)
-# v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-
-#^buildroot ( $CVSROOT/CVSROOT/ciabot.pl %s $USER openwrt cvs-commits@openwrt.ksilebo.net cia@navi.cx )
-#^root ( $CVSROOT/CVSROOT/ciabot.pl %s $USER openwrt cvs-commits@openwrt.ksilebo.net cia@navi.cx )
+++ /dev/null
-# Three different line formats are valid:
-# key -a aliases...
-# key [options] directory
-# key [options] directory files...
-#
-# Where "options" are composed of:
-# -i prog Run "prog" on "cvs commit" from top-level of module.
-# -o prog Run "prog" on "cvs checkout" of module.
-# -e prog Run "prog" on "cvs export" of module.
-# -t prog Run "prog" on "cvs rtag" of module.
-# -u prog Run "prog" on "cvs update" of module.
-# -d dir Place module in directory "dir" instead of module name.
-# -l Top-level directory only -- do not recurse.
-#
-# NOTE: If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias. An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module. This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
+++ /dev/null
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent. The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT. If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
+++ /dev/null
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT. For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
+++ /dev/null
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4-> file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
+++ /dev/null
-# The "verifymsg" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
+++ /dev/null
-UMlinux
-root_fs*
-build_*
-toolchain_build_*
+++ /dev/null
-# Makefile for a simple busybox/uClibc root filesystem
-#
-# Copyright (C) 2001-2004 Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-
-#############################################################
-#
-# EDIT this stuff to suit your system and preferences
-#
-# Use := when possible to get precomputation, thereby
-# speeding up the build process.
-#
-#############################################################
-
-SNAPSHOT:=20050101
-
-ARCH:=mipsel
-#USE_UCLIBC_SNAPSHOT:=$(SNAPSHOT)
-USE_UCLIBC_LDSO_0_9_24:=false
-#USE_BUSYBOX_SNAPSHOT:=$(SNAPSHOT)
-USE_NETFILTER_SNAPSHOT:=20041009
-USE_BRIDGE_VERSION:=1.0.4
-BUILD_WITH_LARGEFILE:=true
-
-OPTIMIZE_FOR_CPU=$(ARCH)
-
-# Command used to download source code
-WGET:=wget --passive-ftp
-
-# Soft floating point options.
-# Notes:
-# Currently builds with gcc 3.3 for arm, mips, mipsel, powerpc.
-# (i386 support will be added back in at some point.)
-# Only tested with multilib enabled.
-# For i386, long double is the same as double (64 bits). While this
-# is unusual for x86, it seemed the best approach considering the
-# limitations in the gcc floating point emulation library.
-# For arm, soft float uses the usual libfloat routines.
-# Custom specs files are used to set the default gcc mode to soft float
-# as a convenience, since you shouldn't link hard and soft float
-# together. In fact, arm won't even let you.
-# (Un)comment the appropriate line below.
-#SOFT_FLOAT:=true
-SOFT_FLOAT:=false
-
-TARGET_OPTIMIZATION=-Os -mips2
-TARGET_DEBUGGING= #-g
-
-# Currently the unwind stuff seems to work for staticly linked apps but
-# not dynamic. So use setjmp/longjmp exceptions by default.
-# GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions
-GCC_USE_SJLJ_EXCEPTIONS:=
-
-# Any additional gcc options you may want to include....
-EXTRA_GCC_CONFIG_OPTIONS:=
-
-# Enable the following if you want locale/gettext/i18n support.
-# NOTE! Currently the pregnerated locale stuff only works for x86!
-#ENABLE_LOCALE:=true
-ENABLE_LOCALE:=false
-
-# If you want multilib enabled, enable this...
-MULTILIB:=--enable-multilib
-
-# Build/install c++ compiler and libstdc++?
-#INSTALL_LIBSTDCPP:=true
-INSTALL_LIBSTDCPP:=false
-
-# Build/install java compiler and libgcj? (requires c++)
-# WARNING!!! DOES NOT BUILD FOR TARGET WITHOUT INTERVENTION!!! mjn3
-#INSTALL_LIBGCJ:=true
-INSTALL_LIBGCJ:=false
-
-# For SMP machines some stuff can be run in parallel
-#JLEVEL=-j3
-
-#############################################################
-#
-# The list of stuff to build for the target filesystem
-#
-#############################################################
-TARGETS:=host-sed openwrt-code.bin
-
-PACKAGES:=oidentd iproute2 kmod-sched wshaper zlib openssl openssh pppoecd dropbear chillispot dhcp-fwd ip6tables kmod-ipt6 kmod-ipv6 kmod-nfs kmod-ppp-async kmod-ppp-mppe-mppc ppp pppoecd pptp-server kmod-tun fprobe libpcap libpthread pptp-client vsftpd matrixssl ntpclient radvd strace
-
-#############################################################
-#
-# You should probably leave this stuff alone unless you know
-# what you are doing.
-#
-#############################################################
-
-ifeq ($(SOFT_FLOAT),true)
-SOFT_FLOAT_CONFIG_OPTION:=--without-float
-TARGET_SOFT_FLOAT:=-msoft-float
-ARCH_FPU_SUFFIX:=_nofpu
-else
-SOFT_FLOAT_CONFIG_OPTION:=
-TARGET_SOFT_FLOAT:=
-ARCH_FPU_SUFFIX:=
-endif
-
-ifeq ($(INSTALL_LIBGCJ),true)
-INSTALL_LIBSTDCPP:=true
-endif
-
-# WARNING -- uClibc currently disables large file support on cris.
-ifeq ("$(strip $(ARCH))","cris")
-BUILD_WITH_LARGEFILE:=false
-endif
-
-ifneq ($(BUILD_WITH_LARGEFILE),true)
-DISABLE_LARGEFILE= --disable-largefile
-endif
-TARGET_CFLAGS=$(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING)
-
-HOSTCC:=gcc
-BASE_DIR:=${shell pwd}
-SOURCE_DIR:=$(BASE_DIR)/sources
-DL_DIR:=$(SOURCE_DIR)/dl
-PATCH_DIR=$(SOURCE_DIR)/patches
-BUILD_DIR:=$(BASE_DIR)/build_$(ARCH)$(ARCH_FPU_SUFFIX)
-TARGET_DIR:=$(BUILD_DIR)/root
-STAGING_DIR=$(BUILD_DIR)/staging_dir
-TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)$(ARCH_FPU_SUFFIX)
-TARGET_PATH=$(STAGING_DIR)/bin:/bin:/sbin:/usr/bin:/usr/sbin
-IMAGE:=$(BASE_DIR)/root_fs_$(ARCH)$(ARCH_FPU_SUFFIX)
-REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux-uclibc
-GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux
-KERNEL_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
-TARGET_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
-TARGET_CC=$(TARGET_CROSS)gcc
-#STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded
-STRIP=$(STAGING_DIR)/bin/sstrip
-
-HOST_ARCH:=$(shell $(HOSTCC) -dumpmachine | sed -e s'/-.*//' \
- -e 's/sparc.*/sparc/' \
- -e 's/arm.*/arm/g' \
- -e 's/m68k.*/m68k/' \
- -e 's/ppc/powerpc/g' \
- -e 's/v850.*/v850/g' \
- -e 's/sh[234]/sh/' \
- -e 's/mips-.*/mips/' \
- -e 's/mipsel-.*/mipsel/' \
- -e 's/cris.*/cris/' \
- -e 's/i[3-9]86/i386/' \
- )
-GNU_HOST_NAME:=$(HOST_ARCH)-pc-linux-gnu
-TARGET_CONFIGURE_OPTS=PATH=$(TARGET_PATH) \
- AR=$(TARGET_CROSS)ar \
- AS=$(TARGET_CROSS)as \
- LD=$(TARGET_CROSS)ld \
- NM=$(TARGET_CROSS)nm \
- CC=$(TARGET_CROSS)gcc \
- GCC=$(TARGET_CROSS)gcc \
- CXX=$(TARGET_CROSS)g++ \
- RANLIB=$(TARGET_CROSS)ranlib
-
-ifeq ($(ENABLE_LOCALE),true)
-DISABLE_NLS:=
-else
-DISABLE_NLS:=--disable-nls
-endif
-
-all: world
-
-TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
-TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
-TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
-
-
-PACKAGES_IPK:=$(patsubst %,%-ipk,$(PACKAGES))
-OPENWRT_IPK_DIR=$(SOURCE_DIR)/openwrt/ipkg
-
-world: $(DL_DIR) $(TARGETS_SOURCE) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
- @echo "ALL DONE."
-
-packages: ipkg-utils $(PACKAGES_IPK)
- -@mkdir -p $(BASE_DIR)/packages
- { \
- cd $(BASE_DIR)/packages; \
- mv $(BUILD_DIR)/*.ipk .; \
- $(IPKG_MAKE_INDEX) . > Packages; \
- }
- @echo "ALL DONE."
-
-.PHONY: all world clean dirclean distclean source $(TARGETS) \
- $(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE)
-
-include make/*.mk
-
-#############################################################
-#
-# staging and target directories do NOT list these as
-# dependancies anywhere else
-#
-#############################################################
-$(DL_DIR):
- mkdir $(DL_DIR)
-
-$(BUILD_DIR):
- mkdir $(BUILD_DIR)
-
-$(STAGING_DIR):
- rm -rf $(STAGING_DIR)
- mkdir -p $(STAGING_DIR)/lib
- mkdir -p $(STAGING_DIR)/usr
- ln -fs $(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/include
- ln -fs ../lib $(STAGING_DIR)/usr/lib
- ln -fs ../$(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/usr/include
-
-
-$(TARGET_DIR):
- rm -rf $(TARGET_DIR)
- cp -a $(SOURCE_DIR)/openwrt/root/ $(TARGET_DIR)
- -find $(TARGET_DIR) -type d -name CVS -exec rm -rf {} \; > /dev/null 2>&1
-
-source: $(TARGETS_SOURCE)
-
-#############################################################
-#
-# Cleanup and misc junk
-#
-#############################################################
-clean:
- rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(IMAGE) \
- $(BASE_DIR)/packages \
- openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
- openwrt-kmodules.tar.bz2
-
-dirclean: $(TARGETS_DIRCLEAN)
- rm -rf $(TARGET_DIR) $(STAGING_DIR) $(IMAGE) \
- $(BASE_DIR)/packages \
- openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
- openwrt-kmodules.tar.bz2
-
-distclean:
- rm -rf $(DL_DIR) $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE) \
- openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
- openwrt-kmodules.tar.bz2
-
-sourceball:
- rm -rf $(BUILD_DIR)
- set -e; \
- cd ..; \
- rm -f buildroot.tar.bz2; \
- tar -cvf buildroot.tar buildroot; \
- bzip2 -9 buildroot.tar; \
+++ /dev/null
-This is a modified uClibc buildroot, customized to build OpenWRT.
-
-If you already have the linksys tarball (check make/openwrt.mk for the
-version used), then move/copy/symlink it into sources/dl. At the
-moment (2004/03/05) I'm using wrt54gv2.2.02.2.tgz.
-
-Simply running 'make' will build openwrt-code.bin and a tarball of
-the kernel modules. Customizations of the kernel, uClibc, and busybox
-are possible by modifying the appropriate config files in source.
-Copies of the stock openwrt Makefile, uClibc.config, busybox.config,
-are included with a '-openwrt' suffix.
-
-Remember that different configurations of uClibc may not be binary
-compatible. Also, uClibc is not necessarily binary compatible between
-versions. In particular, dynamicly linked applications and libraries
-built with the linksys/broadcom toolchain are NOT binary compatible
-with current uClibc.
-
-Manuel Novoa III
-mjn3@codepoet.org
-
-
-2004/03/16 Added patch to support boardtype of bcm94710ap.
- Updated resetmon patch as per mbm.
- Set busybox and uClibc snapshots to known good versions.
-
-2004/03/30 Switch to wrt54gs.2.07.1.tgz as the base tarball.
- Start grabbing the (updated) root skeleton from openwrt cvs.
- Add busybox applets: passwd and nameif.
- Update snapshots of buildroot, uClibc, and busybox.
- Fix broken /var symlink.
-
-2004/03/31 Replace diag_led.c with mbm's rewrite.
- Create code.bin files for both 'G' and 'GS' units.
- Update busybox for sed fix.
-
-2004/05/08 Add busybox applets: chown, chgrp, lsmod, sysctl
- Remove: ipaddr, iplink, iproute
- Update snapshots of buildroot, uClibc, busybox, netfilter.
-
-.. more changes as yet undocumented ..
+++ /dev/null
-OPENWRT PPPOECD NOTES
-=====================
-
-1. GENERAL
-----------
-
-This package is used to estabilish basic connection to the
-Internet via DSL/ADSL modems. This is also known as the
-PPPoE or PPP-over-Ethernet connection.
-
-The PPPOECD program included in the OpenWrt distribution is a
-modified version of the PPPOECD that is present in the original
-Linksys firmware.
-
-This modified version is directly supported by the OpenWrt
-startup scripts.
-
-2. BUILDING
------------
-
-If you have a pre-compiled PPPOECD package, skip this section.
-
-PPPOECD can be built in two ways. As an integrated part
-of the OpenWrt FLASH image or as an .ipk package that can
-be installed separately.
-
-To build PPPOECD as an embedded component, add "pppoecd" to the
-TARGETS variable in the main OpenWrt Makefile before the
-"openwrt-bin" value.
-
-To build as a standalone package, add "pppoecd" to the
-PACKAGES variable in the main OpenWrt Makefile.
-
-3. NVRAM variables
-------------------
-
-In order for the PPPoE link to be established by the networking
-scripts the following NVRAM variables must be present:
-
-wan_ifname Should be set to: ppp0
-
-wan_proto Should be set to: pppoe
-
-pppoe_ifname Set it to the WAN interface on which the PPPoE
- is to function. On a 2.0 or a GS model it is
- usually vlan1. The 1.0 and 1.1 models used vlan2.
-
-ppp_username User name for your PPPoE connection.
-
-ppp_passwd Password for the connection.
-
-ppp_redialperiod Time between reconnect attempts.
- Usualy set to 30.
-
-ppp_idletime Time the link has to stay dead before reconnecting.
- Usually set to 5.
-
-wan_mtu The Maxumum Transfer Unit for the PPPoE connection.
- Typically 1492.
-
-Please consult the OpenWrt WIKI or the forum for more
-information on NVRAM variables.
-
-
-4. STARTUP / SHUTDOWN
----------------------
-
-OpenWrt will attempt to connect using PPPOECD when starting up.
-The script responsible for that is /etc/init.d/S40network.
-
-You can also manually start the PPPOECD by doing:
-
- ifup wan
-
-Similarly you can shutdown the PPPOECD by doing:
-
- ifdown wan
-
-
-5. CONFIGURATION
-----------------
-
-PPPoE firewall configuration is the standard OpenWrt configuration
-in /etc/init.d/S45firewall that applies to all the other types
-of connections to the Internet.
-
-Additional actions can be performed when connecting or disconnecting
-by modifying "ip-up" and "ip-down" scripts in the /etc/ppp directory.
-
-When connecting, PPPOECD creates /tmp/resolv.conf file that contains
-DNS server entries as supplied by the ISP. The standard ip-up
-script will also add a default route leading via the PPPoE link.
-
-6. DIFFERENCES FROM THE ORIGINAL PPPOECD
-----------------------------------------
-
-The main difference is the location of files. Original Linksys
-PPPOECD operated almost exclusively in the /tmp/ppp directory. This
-however prevents any persistent configuration of the program via
-ip-up or ip-down scripts. Also the program itself was located in
-/usr/sbin whereas OpenWrt scripts expect it to be in /sbin directory.
-
-
+++ /dev/null
-## missing variables that should be declared somewhere
-
-LINUX_VERSION := 2.4.20
+++ /dev/null
-########################################################################
-#
-# arptables
-#
-# Arptables is used to set up, maintain, and inspect the tables of ARP
-# rules in the Linux kernel. It is analogous to iptables, but operates
-# at the ARP layer rather than the IP layer."
-#
-########################################################################
-
-ARPTABLES_NAME=arptables
-ARPTABLES_VER=v0.0.3-2
-ARPTABLES_SOURCE=$(ARPTABLES_NAME)-$(ARPTABLES_VER).tar.gz
-ARPTABLES_SOURCE_URL=http://unc.dl.sourceforge.net/sourceforge/ebtables/
-ARPTABLES_BUILD_DIR=$(BUILD_DIR)/$(ARPTABLES_NAME)-$(ARPTABLES_VER)
-
-$(DL_DIR)/$(ARPTABLES_SOURCE):
- $(WGET) -P $(DL_DIR) $(ARPTABLES_SOURCE_URL)/$(ARPTABLES_SOURCE)
-
-$(ARPTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(ARPTABLES_SOURCE)
- zcat $(DL_DIR)/$(ARPTABLES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(ARPTABLES_BUILD_DIR)/.unpacked
-
-$(ARPTABLES_BUILD_DIR)/.configured: $(ARPTABLES_BUILD_DIR)/.unpacked
- # Allow patches. Needed for openwrt for instance.
- $(SOURCE_DIR)/patch-kernel.sh $(ARPTABLES_BUILD_DIR) $(SOURCE_DIR) $(ARPTABLES_NAME)-*.patch
- touch $(ARPTABLES_BUILD_DIR)/.configured
-
-$(ARPTABLES_BUILD_DIR)/$(ARPTABLES_NAME): $(ARPTABLES_BUILD_DIR)/.configured
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(ARPTABLES_BUILD_DIR) \
- CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)"
-
-$(TARGET_DIR)/sbin/$(ARPTABLES_NAME): $(ARPTABLES_BUILD_DIR)/$(ARPTABLES_NAME)
- mkdir -p $(TARGET_DIR)/sbin/
- cp $(ARPTABLES_BUILD_DIR)/$(ARPTABLES_NAME) $(TARGET_DIR)/sbin/$(ARPTABLES_NAME)
- $(STRIP) $(TARGET_DIR)/sbin/$(ARPTABLES_NAME)
-
-$(ARPTABLES_NAME): $(TARGET_DIR)/sbin/$(ARPTABLES_NAME)
-
-$(ARPTABLES_NAME)-source: $(DL_DIR)/$(ARPTABLES_SOURCE)
-
-$(ARPTABLES_NAME)-clean:
- -$(MAKE) -C $(ARPTABLES_BUILD_DIR) clean
-
-$(ARPTABLES_NAME)-dirclean:
- rm -rf $(ARPTABLES_BUILD_DIR)
+++ /dev/null
-#############################################################
-#
-# autoconf
-#
-#############################################################
-AUTOCONF_SOURCE:=autoconf-2.57.tar.bz2
-AUTOCONF_SITE:=ftp://ftp.gnu.org/gnu/autoconf
-AUTOCONF_CAT:=bzcat
-AUTOCONF_DIR:=$(BUILD_DIR)/autoconf-2.57
-AUTOCONF_BINARY:=autoconf
-AUTOCONF_TARGET_BINARY:=usr/bin/autoconf
-
-$(DL_DIR)/$(AUTOCONF_SOURCE):
- $(WGET) -P $(DL_DIR) $(AUTOCONF_SITE)/$(AUTOCONF_SOURCE)
-
-autoconf-source: $(DL_DIR)/$(AUTOCONF_SOURCE)
-
-$(AUTOCONF_DIR)/.unpacked: $(DL_DIR)/$(AUTOCONF_SOURCE)
- $(AUTOCONF_CAT) $(DL_DIR)/$(AUTOCONF_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(AUTOCONF_DIR)/.unpacked
-
-$(AUTOCONF_DIR)/.configured: $(AUTOCONF_DIR)/.unpacked
- (cd $(AUTOCONF_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) EMACS="no" \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(AUTOCONF_DIR)/.configured
-
-$(AUTOCONF_DIR)/bin/$(AUTOCONF_BINARY): $(AUTOCONF_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(AUTOCONF_DIR)
-
-$(TARGET_DIR)/$(AUTOCONF_TARGET_BINARY): $(AUTOCONF_DIR)/bin/$(AUTOCONF_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(AUTOCONF_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-autoconf: uclibc $(TARGET_DIR)/$(AUTOCONF_TARGET_BINARY)
-
-autoconf-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(AUTOCONF_DIR) uninstall
- -$(MAKE) -C $(AUTOCONF_DIR) clean
-
-autoconf-dirclean:
- rm -rf $(AUTOCONF_DIR)
-
+++ /dev/null
-#############################################################
-#
-# automake
-#
-#############################################################
-AUTOMAKE_SOURCE:=automake-1.6.3.tar.bz2
-AUTOMAKE_SITE:=ftp://ftp.gnu.org/gnu/automake
-AUTOMAKE_CAT:=bzcat
-AUTOMAKE_DIR:=$(BUILD_DIR)/automake-1.6.3
-AUTOMAKE_BINARY:=automake
-AUTOMAKE_TARGET_BINARY:=usr/bin/automake
-
-$(DL_DIR)/$(AUTOMAKE_SOURCE):
- $(WGET) -P $(DL_DIR) $(AUTOMAKE_SITE)/$(AUTOMAKE_SOURCE)
-
-automake-source: $(DL_DIR)/$(AUTOMAKE_SOURCE)
-
-$(AUTOMAKE_DIR)/.unpacked: $(DL_DIR)/$(AUTOMAKE_SOURCE)
- $(AUTOMAKE_CAT) $(DL_DIR)/$(AUTOMAKE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(AUTOMAKE_DIR)/.unpacked
-
-$(AUTOMAKE_DIR)/.configured: $(AUTOMAKE_DIR)/.unpacked
- (cd $(AUTOMAKE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(AUTOMAKE_DIR)/.configured
-
-$(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY): $(AUTOMAKE_DIR)/.configured
- $(MAKE) -C $(AUTOMAKE_DIR)
- touch -c $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
-
-$(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY): $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(AUTOMAKE_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- touch -c $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY)
-
-automake: uclibc $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY)
-
-automake-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(AUTOMAKE_DIR) uninstall
- -$(MAKE) -C $(AUTOMAKE_DIR) clean
-
-automake-dirclean:
- rm -rf $(AUTOMAKE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# bash
-#
-#############################################################
-BASH_SOURCE:=bash-2.05b.tar.gz
-BASH_SITE:=ftp://ftp.gnu.org/gnu/bash
-BASH_CAT:=zcat
-BASH_DIR:=$(BUILD_DIR)/bash-2.05b
-BASH_BINARY:=bash
-BASH_TARGET_BINARY:=bin/bash
-
-$(DL_DIR)/$(BASH_SOURCE):
- $(WGET) -P $(DL_DIR) $(BASH_SITE)/$(BASH_SOURCE)
-
-bash-source: $(DL_DIR)/$(BASH_SOURCE)
-
-$(BASH_DIR)/.unpacked: $(DL_DIR)/$(BASH_SOURCE)
- $(BASH_CAT) $(DL_DIR)/$(BASH_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # This is broken when -lintl is added to LIBS
- $(SED) 's,LIBS_FOR_BUILD =.*,LIBS_FOR_BUILD =,g' \
- $(BASH_DIR)/builtins/Makefile.in
- touch $(BASH_DIR)/.unpacked
-
-$(BASH_DIR)/.configured: $(BASH_DIR)/.unpacked
- (cd $(BASH_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) CC_FOR_BUILD=$(HOSTCC) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_setvbuf_reversed=no \
- bash_cv_have_mbstate_t=yes \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --with-curses \
- --enable-alias \
- );
- touch $(BASH_DIR)/.configured
-
-$(BASH_DIR)/$(BASH_BINARY): $(BASH_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) CC_FOR_BUILD=$(HOSTCC) -C $(BASH_DIR)
-
-$(TARGET_DIR)/$(BASH_TARGET_BINARY): $(BASH_DIR)/$(BASH_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BASH_DIR) install
- rm -f $(TARGET_DIR)/bin/bash*
- mv $(TARGET_DIR)/usr/bin/bash* $(TARGET_DIR)/bin/
- (cd $(TARGET_DIR)/bin; ln -fs bash sh)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-bash: ncurses uclibc $(TARGET_DIR)/$(BASH_TARGET_BINARY)
-
-bash-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BASH_DIR) uninstall
- -$(MAKE) -C $(BASH_DIR) clean
-
-bash-dirclean:
- rm -rf $(BASH_DIR)
-
+++ /dev/null
-#############################################################
-#
-# berkeley db
-#
-#############################################################
-DB_SITE:=http://www.sleepycat.com/update/snapshot
-DB_SOURCE:=db-4.1.25.NC.tar.gz
-DB_DIR:=$(BUILD_DIR)/db-4.1.25.NC
-
-
-$(DL_DIR)/$(DB_SOURCE):
- $(WGET) -P $(DL_DIR) $(DB_SITE)/$(DB_SOURCE)
-
-berkeleydb-source: $(DL_DIR)/$(DB_SOURCE)
-
-$(DB_DIR)/.dist: $(DL_DIR)/$(DB_SOURCE)
- zcat $(DL_DIR)/$(DB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(DB_DIR)/.dist
-
-$(DB_DIR)/.configured: $(DB_DIR)/.dist
- (cd $(DB_DIR)/build_unix; rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ../dist/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --with-gnu-ld \
- --enable-shared \
- --disable-cxx \
- --disable-java \
- --disable-rpc \
- --disable-tcl \
- --disable-compat185 \
- --with-pic \
- );
- $(SED) 's/\.lo/.o/g' $(DB_DIR)/build_unix/Makefile
- touch $(DB_DIR)/.configured
-
-$(DB_DIR)/build_unix/.libs/libdb-4.1.so: $(DB_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(DB_DIR)/build_unix
-
-$(STAGING_DIR)/lib/libdb-4.1.so: $(DB_DIR)/build_unix/.libs/libdb-4.1.so
- $(MAKE) \
- prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/lib \
- datadir=$(STAGING_DIR)/share \
- sysconfdir=$(STAGING_DIR)/etc \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- includedir=$(STAGING_DIR)/include \
- -C $(DB_DIR)/build_unix install;
- chmod a-x $(STAGING_DIR)/lib/libdb*so*
- rm -f $(STAGING_DIR)/bin/db_*
- rm -rf $(STAGING_DIR)/share/locale $(STAGING_DIR)/info \
- $(STAGING_DIR)/man $(STAGING_DIR)/share/doc
-
-$(TARGET_DIR)/lib/libdb-4.1.so: $(STAGING_DIR)/lib/libdb-4.1.so
- rm -rf $(TARGET_DIR)/lib/libdb*
- cp -a $(STAGING_DIR)/lib/libdb*so* $(TARGET_DIR)/lib/
- rm -f $(TARGET_DIR)/lib/libdb.so $(TARGET_DIR)/lib/libdb.la $(TARGET_DIR)/lib/libdb.a
- (cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libdb-4.1.so libdb.so)
- -$(STRIP) $(TARGET_DIR)/lib/libdb*so*
-
-$(TARGET_DIR)/usr/lib/libdb.a: $(STAGING_DIR)/lib/libdb-4.1.a
- cp -dpf $(STAGING_DIR)/include/db.h $(TARGET_DIR)/usr/include/
- cp -dpf $(STAGING_DIR)/lib/libdb*.a $(TARGET_DIR)/usr/lib/
- cp -dpf $(STAGING_DIR)/lib/libdb*.la $(TARGET_DIR)/usr/lib/
- touch -c $(TARGET_DIR)/usr/lib/libdb.a
-
-berkeleydb-headers: $(TARGET_DIR)/usr/lib/libdb.a
-
-berkeleydb-clean:
- $(MAKE) -C $(DB_DIR)/build_unix clean
-
-berkeleydb-dirclean:
- rm -rf $(DB_DIR)
-
-berkeleydb: uclibc $(TARGET_DIR)/lib/libdb-4.1.so
-
+++ /dev/null
-#############################################################
-#
-# build binutils for use on the host system
-#
-#############################################################
-BINUTILS_SITE:=http://ftp.kernel.org/pub/linux/devel/binutils
-BINUTILS_SOURCE:=binutils-2.14.90.0.7.tar.bz2
-BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.14.90.0.7
-BINUTILS_CAT:=bzcat
-
-BINUTILS_DIR1:=$(TOOL_BUILD_DIR)/binutils-build
-
-$(DL_DIR)/$(BINUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE)
-
-$(BINUTILS_DIR)/.unpacked: $(DL_DIR)/$(BINUTILS_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- mkdir -p $(DL_DIR)
- $(BINUTILS_CAT) $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(BINUTILS_DIR)/.unpacked
-
-$(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
- # Apply any files named binutils-*.patch from the source directory to binutils
- $(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR) binutils-uclibc*.patch
- touch $(BINUTILS_DIR)/.patched
-
-$(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched
- mkdir -p $(BINUTILS_DIR1)
- (cd $(BINUTILS_DIR1); \
- $(BINUTILS_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) );
- touch $(BINUTILS_DIR1)/.configured
-
-$(BINUTILS_DIR1)/binutils/objdump: $(BINUTILS_DIR1)/.configured
- $(MAKE) $(JLEVEL) -C $(BINUTILS_DIR1) all
-
-# Make install will put gettext data in staging_dir/share/locale.
-# Unfortunatey, it isn't configureable.
-$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/ld: $(BINUTILS_DIR1)/binutils/objdump
- $(MAKE) $(JLEVEL) -C $(BINUTILS_DIR1) install
-
-binutils-dependancies:
- @if [ -z "`which bison`" ] ; then \
- echo -e "\n\nYou must install 'bison' on your build machine\n"; \
- exit 1; \
- fi;
- @if [ -z "`which flex`" ] ; then \
- echo -e "\n\nYou must install 'flex' on your build machine\n"; \
- exit 1; \
- fi;
- @if [ -z "`which msgfmt`" ] ; then \
- echo -e "\n\nYou must install 'gettext' on your build machine\n"; \
- exit 1; \
- fi;
-
-binutils: binutils-dependancies $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/ld
-
-binutils-source: $(DL_DIR)/$(BINUTILS_SOURCE)
-
-binutils-clean:
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
- -$(MAKE) -C $(BINUTILS_DIR1) clean
-
-binutils-dirclean:
- rm -rf $(BINUTILS_DIR1)
-
-
-
-#############################################################
-#
-# build binutils for use on the target system
-#
-#############################################################
-BINUTILS_DIR2:=$(BUILD_DIR)/binutils-target
-$(BINUTILS_DIR2)/.configured: $(BINUTILS_DIR)/.patched
- mkdir -p $(BINUTILS_DIR2)
- (cd $(BINUTILS_DIR2); \
- PATH=$(TARGET_PATH) \
- CFLAGS="$(TARGET_CFLAGS)" \
- CFLAGS_FOR_BUILD="-O2 -g" \
- $(BINUTILS_DIR)/configure \
- --prefix=/usr \
- --exec-prefix=/usr \
- --build=$(GNU_HOST_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) );
- touch $(BINUTILS_DIR2)/.configured
-
-$(BINUTILS_DIR2)/binutils/objdump: $(BINUTILS_DIR2)/.configured
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) -C $(BINUTILS_DIR2) all
-
-$(TARGET_DIR)/usr/bin/ld: $(BINUTILS_DIR2)/binutils/objdump
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) \
- tooldir=/usr build_tooldir=/usr \
- -C $(BINUTILS_DIR2) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- -$(STRIP) $(TARGET_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin/* > /dev/null 2>&1
- -$(STRIP) $(TARGET_DIR)/usr/bin/* > /dev/null 2>&1
-
-binutils_target: $(GCC_DEPENDANCY) $(TARGET_DIR)/usr/bin/ld
-
-binutils_target-clean:
- rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
- -$(MAKE) -C $(BINUTILS_DIR2) clean
-
-binutils_target-dirclean:
- rm -rf $(BINUTILS_DIR2)
-
+++ /dev/null
-#############################################################
-#
-# bison
-#
-#############################################################
-BISON_SOURCE:=bison-1.35.tar.bz2
-BISON_SITE:=ftp://ftp.gnu.org/gnu/bison
-BISON_DIR:=$(BUILD_DIR)/bison-1.35
-BISON_CAT:=bzcat
-BISON_BINARY:=src/bison
-BISON_TARGET_BINARY:=usr/bin/bison
-
-$(DL_DIR)/$(BISON_SOURCE):
- $(WGET) -P $(DL_DIR) $(BISON_SITE)/$(BISON_SOURCE)
-
-bison-source: $(DL_DIR)/$(BISON_SOURCE)
-
-$(BISON_DIR)/.unpacked: $(DL_DIR)/$(BISON_SOURCE)
- $(BISON_CAT) $(DL_DIR)/$(BISON_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(BISON_DIR)/.unpacked
-
-$(BISON_DIR)/.configured: $(BISON_DIR)/.unpacked
- (cd $(BISON_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- gt_cv_func_gnugettext2_libintl=yes \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(BISON_DIR)/.configured
-
-$(BISON_DIR)/$(BISON_BINARY): $(BISON_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(BISON_DIR)
-
-$(TARGET_DIR)/$(BISON_TARGET_BINARY): $(BISON_DIR)/$(BISON_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BISON_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- cp -a $(SOURCE_DIR)/yacc $(TARGET_DIR)/usr/bin/yacc
-
-bison: uclibc $(TARGET_DIR)/$(BISON_TARGET_BINARY)
-
-bison-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BISON_DIR) uninstall
- -$(MAKE) -C $(BISON_DIR) clean
-
-bison-dirclean:
- rm -rf $(BISON_DIR)
-
+++ /dev/null
-#############################################################
-#
-# boa
-#
-#############################################################
-
-BOA_VERSION=0.94.14rc4
-
-# Don't alter below this line unless you (think) you know
-# what you are doing! Danger, Danger!
-
-BOA_SOURCE=boa-$(BOA_VERSION).tar.gz
-BOA_SITE=http://www.boa.org/
-BOA_DIR=$(BUILD_DIR)/${shell basename $(BOA_SOURCE) .tar.gz}
-BOA_WORKDIR=$(BUILD_DIR)/boa_workdir
-
-$(DL_DIR)/$(BOA_SOURCE):
- $(WGET) -P $(DL_DIR) $(BOA_SITE)/$(BOA_SOURCE)
-
-$(BOA_DIR)/.unpacked: $(DL_DIR)/$(BOA_SOURCE)
- gzip -d -c $(DL_DIR)/$(BOA_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(BOA_DIR)/.unpacked
-
-$(BOA_WORKDIR)/Makefile: $(BOA_DIR)/.unpacked
- rm -f $(BOA_WORKDIR)/Makefile
- mkdir -p $(BOA_WORKDIR)
- (cd $(BOA_WORKDIR) && CONFIG_SITE=$(SOURCE_DIR)/boa-config.site-$(ARCH) \
- CC=$(TARGET_CC) $(BOA_DIR)/configure)
- touch $(BOA_WORKDIR)/.depend
-
-$(BOA_WORKDIR)/boa $(BOA_WORKDIR)/boa_indexer: $(BOA_WORKDIR)/Makefile
- rm -f $@
- $(MAKE) VPATH=$(BOA_DIR)/src/ -C $(BOA_WORKDIR)
-
-$(BOA_WORKDIR)/.installed: $(BOA_WORKDIR)/boa $(BOA_WORKDIR)/boa_indexer
- mkdir -p $(TARGET_DIR)/usr/sbin
- cp -f $(BOA_WORKDIR)/src/boa $(TARGET_DIR)/usr/sbin/boa
- mkdir -p $(TARGET_DIR)/usr/lib/boa
- cp -f $(BOA_WORKDIR)/src/boa_indexer $(TARGET_DIR)/usr/lib/boa/boa_indexer
- mkdir -p $(TARGET_DIR)/etc/boa
- cp -f $(SOURCE_DIR)/boa.conf $(TARGET_DIR)/etc/boa
- cp -f $(SOURCE_DIR)/mime.types $(TARGET_DIR)/etc/mime.types
- strip --strip-all $(TARGET_DIR)/usr/sbin/boa $(TARGET_DIR)/usr/lib/boa/boa_indexer
- touch $(BOA_WORKDIR)/.installed
-
-boa: uclibc $(BOA_WORKDIR)/.installed
-
-boa-source: $(DL_DIR)/$(BOA_SOURCE)
-
-boa-clean:
- @if [ -d $(BOA_WORKDIR)/Makefile ] ; then \
- $(MAKE) -C $(BOA_WORKDIR) clean ; \
- fi;
-
-boa-dirclean:
- rm -rf $(BOA_DIR) $(BOA_WORKDIR)
-
+++ /dev/null
-#############################################################
-#
-# bridgeutils - User Space Program For Controling Bridging
-#
-#############################################################
-
-ifeq ($(strip $(USE_BRIDGE_VERSION)),)
-USE_BRIDGE_VERSION=0.9.7
-endif
-BRIDGE_SOURCE_URL=http://dl.sourceforge.net/sourceforge/bridge/
-BRIDGE_SOURCE=bridge-utils-$(USE_BRIDGE_VERSION).tar.gz
-BRIDGE_BUILD_DIR=$(BUILD_DIR)/bridge-utils-$(USE_BRIDGE_VERSION)
-BRIDGE_TARGET_BINARY:=usr/sbin/brctl
-
-$(DL_DIR)/$(BRIDGE_SOURCE):
- $(WGET) -P $(DL_DIR) $(BRIDGE_SOURCE_URL)/$(BRIDGE_SOURCE)
-
-$(BRIDGE_BUILD_DIR)/.unpacked: $(DL_DIR)/$(BRIDGE_SOURCE)
- # ack! it's a .tgz which is really a bzip
- zcat $(DL_DIR)/$(BRIDGE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- patch -p1 -d $(BRIDGE_BUILD_DIR) < $(SOURCE_DIR)/bridge.patch
- touch $(BRIDGE_BUILD_DIR)/.unpacked
-
-$(BRIDGE_BUILD_DIR)/.configured: $(BRIDGE_BUILD_DIR)/.unpacked
- (cd $(BRIDGE_BUILD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --with-linux-headers=$(LINUX_DIR) \
- );
- touch $(BRIDGE_BUILD_DIR)/.configured
-
-$(BRIDGE_BUILD_DIR)/brctl/brctl: $(BRIDGE_BUILD_DIR)/.configured
- $(MAKE) -C $(BRIDGE_BUILD_DIR)
-
-$(TARGET_DIR)/$(BRIDGE_TARGET_BINARY): $(BRIDGE_BUILD_DIR)/brctl/brctl
- cp -af $(BRIDGE_BUILD_DIR)/brctl/brctl $(TARGET_DIR)/$(BRIDGE_TARGET_BINARY)
- $(STRIP) $(TARGET_DIR)/$(BRIDGE_TARGET_BINARY)
- #cp -af $(BRIDGE_BUILD_DIR)/brctl/brctld $(TARGET_DIR)/usr/sbin/
- #$(STRIP) $(TARGET_DIR)/usr/sbin/brctld
-
-bridge: $(TARGET_DIR)/$(BRIDGE_TARGET_BINARY)
-
-bridge-source: $(DL_DIR)/$(BRIDGE_SOURCE)
-
-bridge-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BRIDGE_BUILD_DIR) uninstall
- -$(MAKE) -C $(BRIDGE_BUILD_DIR) clean
-
-bridge-dirclean:
- rm -rf $(BRIDGE_BUILD_DIR)
+++ /dev/null
-#############################################################
-#
-# busybox
-#
-#############################################################
-
-ifneq ($(strip $(USE_BUSYBOX_SNAPSHOT)),)
-# Be aware that this changes daily....
-BUSYBOX_DIR:=$(BUILD_DIR)/busybox
-BUSYBOX_SOURCE:=busybox-$(strip $(USE_BUSYBOX_SNAPSHOT)).tar.bz2
-BUSYBOX_SITE:=http://www.busybox.net/downloads/snapshots
-else
-BUSYBOX_DIR:=$(BUILD_DIR)/busybox-1.00
-BUSYBOX_SOURCE:=busybox-1.00.tar.bz2
-BUSYBOX_SITE:=http://www.busybox.net/downloads
-endif
-BUSYBOX_UNZIP=bzcat
-BUSYBOX_CONFIG:=$(SOURCE_DIR)/openwrt/busybox/busybox.config
-
-$(DL_DIR)/$(BUSYBOX_SOURCE):
- $(WGET) -P $(DL_DIR) $(BUSYBOX_SITE)/$(BUSYBOX_SOURCE)
-
-busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
-
-$(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
- $(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # Allow busybox patches.
- $(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR)/openwrt/busybox/patches
- cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config
- $(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\
- PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
- $(SED) "s/^.*CONFIG_LFS.*/CONFIG_LFS=y/;" $(BUSYBOX_DIR)/.config
-else
- $(SED) "s/^.*CONFIG_LFS.*/CONFIG_LFS=n/;" $(BUSYBOX_DIR)/.config
-endif
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" -C $(BUSYBOX_DIR) oldconfig
- touch $(BUSYBOX_DIR)/.configured
-
-busybox-unpack: $(BUSYBOX_DIR)/.configured
-
-$(BUSYBOX_DIR)/busybox: $(BUSYBOX_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" PREFIX="$(TARGET_DIR)" \
- EXTRA_CFLAGS="$(TARGET_CFLAGS) -fomit-frame-pointer" -C $(BUSYBOX_DIR)
-
-$(TARGET_DIR)/bin/busybox: $(BUSYBOX_DIR)/busybox
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" PREFIX="$(TARGET_DIR)" \
- EXTRA_CFLAGS="$(TARGET_CFLAGS)" -C $(BUSYBOX_DIR) install
- # Just in case
- -chmod a+x $(TARGET_DIR)/usr/share/udhcpc/default.script
-
-busybox: uclibc $(TARGET_DIR)/bin/busybox
-
-busybox-clean:
- rm -f $(TARGET_DIR)/bin/busybox
- -$(MAKE) -C $(BUSYBOX_DIR) clean
-
-busybox-dirclean:
- rm -rf $(BUSYBOX_DIR)
+++ /dev/null
-#############################################################
-#
-# bzip2
-#
-#############################################################
-BZIP2_SOURCE:=bzip2-1.0.2.tar.gz
-BZIP2_SITE:=ftp://sources.redhat.com/pub/bzip2/v102
-BZIP2_DIR:=$(BUILD_DIR)/bzip2-1.0.2
-BZIP2_CAT:=zcat
-BZIP2_BINARY:=$(BZIP2_DIR)/bzip2
-BZIP2_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/bzmore
-
-$(DL_DIR)/$(BZIP2_SOURCE):
- $(WGET) -P $(DL_DIR) $(BZIP2_SITE)/$(BZIP2_SOURCE)
-
-bzip2-source: $(DL_DIR)/$(BZIP2_SOURCE)
-
-$(BZIP2_DIR)/.unpacked: $(DL_DIR)/$(BZIP2_SOURCE)
- $(BZIP2_CAT) $(DL_DIR)/$(BZIP2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SED) "s,ln \$$(,ln -sf \$$(,g" $(BZIP2_DIR)/Makefile
- $(SED) "s,ln -s (lib.*),ln -sf \$$1 ; ln -sf libbz2.so.1.0.2 libbz2.so,g" \
- $(BZIP2_DIR)/Makefile-libbz2_so
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),false)
- $(SED) "s,^BIGFILES,#BIGFILES,g" $(BZIP2_DIR)/Makefile
- $(SED) "s,^BIGFILES,#BIGFILES,g" $(BZIP2_DIR)/Makefile-libbz2_so
-endif
- touch $(BZIP2_DIR)/.unpacked
-
-$(STAGING_DIR)/lib/libbz2.so.1.0.2: $(BZIP2_DIR)/.unpacked
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) -f Makefile-libbz2_so
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) libbz2.a
- cp $(BZIP2_DIR)/bzlib.h $(STAGING_DIR)/include/
- cp $(BZIP2_DIR)/libbz2.so.1.0.2 $(STAGING_DIR)/lib/
- cp $(BZIP2_DIR)/libbz2.a $(STAGING_DIR)/lib/
- (cd $(STAGING_DIR)/lib/; ln -sf libbz2.so.1.0.2 libbz2.so)
- (cd $(STAGING_DIR)/lib/; ln -sf libbz2.so.1.0.2 libbz2.so.1.0)
-
-$(BZIP2_BINARY): $(STAGING_DIR)/lib/libbz2.so.1.0.2
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) bzip2 bzip2recover
-
-$(BZIP2_TARGET_BINARY): $(BZIP2_BINARY)
- (cd $(TARGET_DIR)/usr/bin; \
- rm -f bzip2 bunzip2 bzcat bzip2recover bzgrep bzegrep bzfgrep bzmore bzless bzdiff bzcmp);
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) PREFIX=$(TARGET_DIR)/usr -C $(BZIP2_DIR) install
- rm -f $(TARGET_DIR)/usr/lib/libbz2.a
- rm -f $(TARGET_DIR)/usr/include/bzlib.h
- cp $(BZIP2_DIR)/libbz2.so.1.0.2 $(TARGET_DIR)/usr/lib/
- (cd $(TARGET_DIR)/usr/lib; \
- ln -sf libbz2.so.1.0.2 libbz2.so.1.0; \
- ln -sf libbz2.so.1.0.2 libbz2.so)
- (cd $(TARGET_DIR)/usr/bin; \
- ln -sf bzip2 bunzip2; \
- ln -sf bzip2 bzcat; \
- ln -sf bzdiff bzcmp; \
- ln -sf bzmore bzless; \
- ln -sf bzgrep bzegrep; \
- ln -sf bzgrep bzfgrep;)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-$(TARGET_DIR)/usr/lib/libbz2.a: $(STAGING_DIR)/lib/libbz2.a
- mkdir -p $(TARGET_DIR)/usr/include
- cp $(STAGING_DIR)/include/bzlib.h $(TARGET_DIR)/usr/include/
- cp $(STAGING_DIR)/lib/libbz2.a $(TARGET_DIR)/usr/lib/
- rm -f $(TARGET_DIR)/lib/libbz2.so
- (cd $(TARGET_DIR)/usr/lib; \
- ln -fs /usr/lib/libbz2.so.1.0 libbz2.so; \
- )
- -$(STRIP) $(TARGET_DIR)/usr/lib/libbz2.so.1.0
- touch -c $(TARGET_DIR)/usr/lib/libbz2.a
-
-bzip2-headers: $(TARGET_DIR)/usr/lib/libbz2.a
-
-bzip2: uclibc $(BZIP2_TARGET_BINARY)
-
-bzip2-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BZIP2_DIR) uninstall
- -$(MAKE) -C $(BZIP2_DIR) clean
-
-bzip2-dirclean:
- rm -rf $(BZIP2_DIR)
-
+++ /dev/null
-#############################################################
-#
-# build ccache to make recompiles faster on the build system
-#
-#############################################################
-CCACHE_SITE:=http://ccache.samba.org/ftp/ccache
-CCACHE_SOURCE:=ccache-2.3.tar.gz
-CCACHE_DIR1:=$(TOOL_BUILD_DIR)/ccache-2.3
-CCACHE_DIR2:=$(BUILD_DIR)/ccache-2.3
-CCACHE_CAT:=zcat
-CCACHE_BINARY:=ccache
-CCACHE_TARGET_BINARY:=usr/bin/ccache
-
-$(DL_DIR)/$(CCACHE_SOURCE):
- $(WGET) -P $(DL_DIR) $(CCACHE_SITE)/$(CCACHE_SOURCE)
-
-$(CCACHE_DIR1)/.unpacked: $(DL_DIR)/$(CCACHE_SOURCE)
- $(CCACHE_CAT) $(DL_DIR)/$(CCACHE_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(CCACHE_DIR1)/.unpacked
-
-$(CCACHE_DIR1)/.patched: $(CCACHE_DIR1)/.unpacked
- $(SED) "s,getenv(\"CCACHE_PATH\"),\"$(STAGING_DIR)/usr/bin\",g" \
- $(CCACHE_DIR1)/execute.c
- $(SED) "s,getenv(\"CCACHE_DIR\"),\"$(CCACHE_DIR1)/cache\",g" \
- $(CCACHE_DIR1)/ccache.c
- mkdir -p $(CCACHE_DIR1)/cache
- touch $(CCACHE_DIR1)/.patched
-
-$(CCACHE_DIR1)/.configured: $(CCACHE_DIR1)/.patched
- mkdir -p $(CCACHE_DIR1)
- (cd $(CCACHE_DIR1); rm -rf config.cache; \
- CC=$(HOSTCC) \
- $(CCACHE_DIR1)/configure \
- --target=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- );
- touch $(CCACHE_DIR1)/.configured
-
-$(CCACHE_DIR1)/$(CCACHE_BINARY): $(CCACHE_DIR1)/.configured
- $(MAKE) CC=$(HOSTCC) -C $(CCACHE_DIR1)
-
-$(STAGING_DIR)/$(CCACHE_TARGET_BINARY): $(CCACHE_DIR1)/$(CCACHE_BINARY)
- mkdir -p $(STAGING_DIR)/usr/bin;
- mkdir -p $(TOOL_BUILD_DIR)/.ccache;
- cp $(CCACHE_DIR1)/ccache $(STAGING_DIR)/usr/bin
- (cd $(STAGING_DIR)/usr/bin; \
- ln -fs $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(OPTIMIZE_FOR_CPU)-linux-gcc; \
- ln -fs $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(OPTIMIZE_FOR_CPU)-linux-cc; \
- ln -fs $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(OPTIMIZE_FOR_CPU)-linux-uclibc-cc);
- [ -f $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc ] && \
- mv $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(STAGING_DIR)/usr/bin/
- (cd $(STAGING_DIR)/bin; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-cc; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-gcc; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-cc; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc);
-ifeq ($(INSTALL_LIBSTDCPP),true)
- [ -f $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-c++ ] && \
- mv $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-c++ $(STAGING_DIR)/usr/bin/
- [ -f $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-g++ ] && \
- mv $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-g++ $(STAGING_DIR)/usr/bin/
- (cd $(STAGING_DIR)/bin; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-c++; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-g++;\
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-c++; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-g++);
-endif
-
-ifeq ($(GCC_2_95_TOOLCHAIN),true)
-ccache: gcc2_95 $(STAGING_DIR)/$(CCACHE_TARGET_BINARY)
-else
-ccache: gcc3_3 $(STAGING_DIR)/$(CCACHE_TARGET_BINARY)
-endif
-
-ccache-clean:
- $(MAKE) -C $(CCACHE_DIR1) uninstall
- -$(MAKE) -C $(CCACHE_DIR1) clean
-
-ccache-dirclean:
- rm -rf $(CCACHE_DIR1)
-
-
-
-
-#############################################################
-#
-# build ccache for use on the target system
-#
-#############################################################
-
-$(CCACHE_DIR2)/.unpacked: $(DL_DIR)/$(CCACHE_SOURCE)
- $(CCACHE_CAT) $(DL_DIR)/$(CCACHE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(CCACHE_DIR2)/.unpacked
-
-$(CCACHE_DIR2)/.patched: $(CCACHE_DIR2)/.unpacked
- touch $(CCACHE_DIR2)/.patched
-
-$(CCACHE_DIR2)/.configured: $(CCACHE_DIR2)/.patched
- mkdir -p $(CCACHE_DIR2)
- (cd $(CCACHE_DIR2); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(CCACHE_DIR2)/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(CCACHE_DIR2)/.configured
-
-$(CCACHE_DIR2)/$(CCACHE_BINARY): $(CCACHE_DIR2)/.configured
- $(MAKE) -C $(CCACHE_DIR2)
-
-$(TARGET_DIR)/$(CCACHE_TARGET_BINARY): $(CCACHE_DIR2)/$(CCACHE_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(CCACHE_DIR2) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # put a bunch of symlinks into /bin, since that is earlier
- # in the default PATH than /usr/bin where gcc lives
- (cd $(TARGET_DIR)/bin; \
- ln -fs /usr/bin/ccache cc; \
- ln -fs /usr/bin/ccache gcc; \
- ln -fs /usr/bin/ccache c++; \
- ln -fs /usr/bin/ccache g++;)
-
-ccache_target: uclibc $(TARGET_DIR)/$(CCACHE_TARGET_BINARY)
-
-ccache_target-sources: $(DL_DIR)/$(CCACHE_SOURCE)
-
-ccache_target-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(CCACHE_DIR2) uninstall
- -$(MAKE) -C $(CCACHE_DIR2) clean
-
-ccache_target-dirclean:
- rm -rf $(CCACHE_DIR2)
-
+++ /dev/null
-#############################################################
-#
-# chillispot
-#
-#############################################################
-
-CHILLISPOT_VERSION:=0.96
-CHILLISPOT_RELEASE:=1
-
-CHILLISPOT_SOURCE:=chillispot-$(CHILLISPOT_VERSION).tar.gz
-CHILLISPOT_SITE:=http://www.chillispot.org/download/
-CHILLISPOT_CAT:=zcat
-CHILLISPOT_DIR:=$(BUILD_DIR)/chillispot-$(CHILLISPOT_VERSION)
-CHILLISPOT_BINARY:=src/chilli
-CHILLISPOT_TARGET_BINARY:=usr/sbin/chilli
-
-CHILLISPOT_BUILD_DIR := $(BUILD_DIR)/chillispot_$(CHILLISPOT_VERSION)-$(CHILLISPOT_RELEASE)
-CHILLISPOT_IPK_DIR := $(OPENWRT_IPK_DIR)/chillispot
-CHILLISPOT_IPK := $(CHILLISPOT_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(CHILLISPOT_SOURCE):
- $(WGET) -P $(DL_DIR) $(CHILLISPOT_SITE)/$(CHILLISPOT_SOURCE)
-
-chillispot-source: $(DL_DIR)/$(CHILLISPOT_SOURCE)
-
-$(CHILLISPOT_DIR)/.stamp-unpacked: $(DL_DIR)/$(CHILLISPOT_SOURCE)
- $(CHILLISPOT_CAT) $(DL_DIR)/$(CHILLISPOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(CHILLISPOT_DIR)/.stamp-unpacked
-
-$(CHILLISPOT_DIR)/.stamp-configured: $(CHILLISPOT_DIR)/.stamp-unpacked
- (cd $(CHILLISPOT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_malloc_0_nonnull=yes \
- ac_cv_func_memcmp_working=yes \
- ac_cv_func_setvbuf_reversed=no \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(CHILLISPOT_DIR)/.stamp-configured
-
-$(CHILLISPOT_DIR)/.stamp-built: $(CHILLISPOT_DIR)/.stamp-configured
- $(MAKE) CC=$(TARGET_CC) $(TARGET_CONFIGURE_OPTS) -C $(CHILLISPOT_DIR)
- touch $(CHILLISPOT_DIR)/.stamp-built
-
-$(CHILLISPOT_BUILD_DIR)/CONTROL/control: $(CHILLISPOT_DIR)/.stamp-built
- rm -rf $(CHILLISPOT_BUILD_DIR)
- mkdir -p $(CHILLISPOT_BUILD_DIR)/usr/sbin
- cp -a $(CHILLISPOT_DIR)/src/chilli $(CHILLISPOT_BUILD_DIR)/usr/sbin/
- $(STRIP) $(CHILLISPOT_BUILD_DIR)/usr/sbin/*
- mkdir -p $(CHILLISPOT_BUILD_DIR)/etc
- cp -a $(CHILLISPOT_DIR)/doc/chilli.conf $(CHILLISPOT_BUILD_DIR)/etc
- cp -a $(CHILLISPOT_IPK_DIR)/root/* $(CHILLISPOT_BUILD_DIR)/
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/etc
- chmod 0600 $(CHILLISPOT_BUILD_DIR)/etc/chilli.conf
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/etc/init.d
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/etc/init.d/*
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/usr
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/usr/sbin
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/usr/sbin/*
- cp -a $(CHILLISPOT_IPK_DIR)/CONTROL $(CHILLISPOT_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(CHILLISPOT_VERSION)-$(CHILLISPOT_RELEASE)/" $(CHILLISPOT_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(CHILLISPOT_BUILD_DIR)/CONTROL/control
-
- touch $(CHILLISPOT_BUILD_DIR)/CONTROL/control
-
-
-$(CHILLISPOT_IPK): $(CHILLISPOT_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(CHILLISPOT_BUILD_DIR)
-
-
-chillispot-ipk: ipkg-utils $(CHILLISPOT_IPK)
-
-chillispot-clean:
- $(MAKE) -C $(CHILLISPOT_DIR) clean
-
-chillispot-dirclean:
- rm -rf $(CHILLISPOT_DIR)
+++ /dev/null
-#############################################################
-#
-# coreutils
-#
-#############################################################
-COREUTILS_SOURCE:=coreutils-5.0.tar.bz2
-COREUTILS_SITE:=ftp://ftp.gnu.org/gnu/coreutils/
-COREUTILS_CAT:=bzcat
-COREUTILS_DIR:=$(BUILD_DIR)/coreutils-5.0
-COREUTILS_BINARY:=src/vdir
-COREUTILS_TARGET_BINARY:=bin/vdir
-BIN_PROGS:=cat chgrp chmod chown cp date dd df dir echo false hostname \
- ln ls mkdir mknod mv pwd rm rmdir vdir sleep stty sync touch true uname
-
-$(DL_DIR)/$(COREUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(COREUTILS_SITE)/$(COREUTILS_SOURCE)
-
-coreutils-source: $(DL_DIR)/$(COREUTILS_SOURCE)
-
-$(COREUTILS_DIR)/.unpacked: $(DL_DIR)/$(COREUTILS_SOURCE)
- $(COREUTILS_CAT) $(DL_DIR)/$(COREUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(COREUTILS_DIR)/.unpacked
-
-$(COREUTILS_DIR)/.configured: $(COREUTILS_DIR)/.unpacked
- (cd $(COREUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --disable-rpath \
- --disable-dependency-tracking \
- );
- #Fix up the max number of open files per process, which apparently
- # is not set when cross compiling
- $(SED) 's,.*UTILS_OPEN_MAX.*,#define UTILS_OPEN_MAX 1019,g' \
- $(COREUTILS_DIR)/config.h
- # This is undefined when crosscompiling...
- $(SED) 's,.*HAVE_PROC_UPTIME.*,#define HAVE_PROC_UPTIME 1,g' \
- $(COREUTILS_DIR)/config.h
- touch $(COREUTILS_DIR)/.configured
-
-$(COREUTILS_DIR)/$(COREUTILS_BINARY): $(COREUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(COREUTILS_DIR)
- rm -f $(TARGET_DIR)/$(COREUTILS_TARGET_BINARY)
-
-$(TARGET_DIR)/$(COREUTILS_TARGET_BINARY): $(COREUTILS_DIR)/$(COREUTILS_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(COREUTILS_DIR) install
- # some things go in root rather than usr
- for f in $(BIN_PROGS); do \
- mv $(TARGET_DIR)/usr/bin/$$f $(TARGET_DIR)/bin/$$f; \
- done
- # link for archaic shells
- ln -fs test $(TARGET_DIR)/usr/bin/[
- # gnu thinks chroot is in bin, debian thinks it's in sbin
- mv $(TARGET_DIR)/usr/bin/chroot $(TARGET_DIR)/usr/sbin/chroot
- $(STRIP) $(TARGET_DIR)/usr/sbin/chroot > /dev/null 2>&1
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-coreutils: uclibc $(TARGET_DIR)/$(COREUTILS_TARGET_BINARY)
-
-coreutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(COREUTILS_DIR) uninstall
- -$(MAKE) -C $(COREUTILS_DIR) clean
-
-coreutils-dirclean:
- rm -rf $(COREUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mkcramfs to build to target cramfs filesystems
-#
-#############################################################
-CRAMFS_DIR=$(BUILD_DIR)/cramfs-1.1
-CRAMFS_SOURCE=cramfs-1.1.tar.gz
-CRAMFS_SITE=http://aleron.dl.sourceforge.net/sourceforge/cramfs
-CRAMFS_PATCH=$(SOURCE_DIR)/cramfs.patch
-
-$(DL_DIR)/$(CRAMFS_SOURCE):
- $(WGET) -P $(DL_DIR) $(CRAMFS_SITE)/$(CRAMFS_SOURCE)
-
-$(CRAMFS_DIR): $(DL_DIR)/$(CRAMFS_SOURCE) $(CRAMFS_PATCH)
- zcat $(DL_DIR)/$(CRAMFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(CRAMFS_PATCH) | patch -p1 -d $(CRAMFS_DIR)
-
-$(CRAMFS_DIR)/mkcramfs: $(CRAMFS_DIR)
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" -C $(CRAMFS_DIR);
- touch -c $(CRAMFS_DIR)/mkcramfs
-
-cramfs: $(CRAMFS_DIR)/mkcramfs
-
-cramfs-source: $(DL_DIR)/$(CRAMFS_SOURCE)
-
-cramfs-clean:
- -$(MAKE) -C $(CRAMFS_DIR) clean
-
-cramfs-dirclean:
- rm -rf $(CRAMFS_DIR)
-
-#############################################################
-#
-# Build the cramfs root filesystem image
-#
-#############################################################
-
-cramfsroot: cramfs
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true;
- @rm -rf $(TARGET_DIR)/usr/man
- @rm -rf $(TARGET_DIR)/usr/info
- $(CRAMFS_DIR)/mkcramfs -q -D $(SOURCE_DIR)/device_table.txt $(TARGET_DIR) $(IMAGE)
-
-cramfsroot-source: cramfs-source
-
-cramfsroot-clean:
- -$(MAKE) -C $(CRAMFS_DIR) clean
-
-cramfsroot-dirclean:
- rm -rf $(CRAMFS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# Any custom stuff you feel like doing....
-#
-#############################################################
-CUST_DIR:=$(SOURCE_DIR)/customize
-ROOT_DIR:=$(BUILD_DIR)/root
-
-customize:
- cp -af $(CUST_DIR)/* $(ROOT_DIR)/
+++ /dev/null
-## dhcp-fwd
-
-DHCP_FWD_VERSION := 0.7
-DHCP_FWD_RELEASE := 1
-
-DHCP_FWD_SOURCE := dhcp-forwarder-$(DHCP_FWD_VERSION).tar.bz2
-DHCP_FWD_SITE := http://www-user.tu-chemnitz.de/~ensc/dhcp-fwd/files/
-DHCP_FWD_DIR := $(BUILD_DIR)/dhcp-forwarder-$(DHCP_FWD_VERSION)
-DHCP_FWD_CAT := bzcat
-
-DHCP_FWD_BUILD_DIR := $(BUILD_DIR)/dhcp-fwd_$(DHCP_FWD_VERSION)-$(DHCP_FWD_RELEASE)
-DHCP_FWD_IPK_DIR := $(OPENWRT_IPK_DIR)/dhcp-fwd
-DHCP_FWD_IPK := $(DHCP_FWD_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(DHCP_FWD_SOURCE):
- $(WGET) -P $(DL_DIR) $(DHCP_FWD_SITE)/$(DHCP_FWD_SOURCE)
-
-
-$(DHCP_FWD_DIR)/.stamp-unpacked: $(DL_DIR)/$(DHCP_FWD_SOURCE)
- $(DHCP_FWD_CAT) $(DL_DIR)/$(DHCP_FWD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(DHCP_FWD_DIR)/.stamp-unpacked
-
-
-$(DHCP_FWD_DIR)/.stamp-configured: $(DHCP_FWD_DIR)/.stamp-unpacked
- cd $(DHCP_FWD_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_malloc_0_nonnull="yes" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --datadir=/usr/share \
- --infodir=/usr/share/info \
- --mandir=/usr/share/man \
- --localstatedir=/var \
- --sysconfdir=/etc \
- $(DISABLE_NLS) \
-
- touch $(DHCP_FWD_DIR)/.stamp-configured
-
-
-$(DHCP_FWD_DIR)/.stamp-built: $(DHCP_FWD_DIR)/.stamp-configured
- cd $(DHCP_FWD_DIR) ; \
- touch config.guess ; \
- touch config.sub ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- cfg_filename="/etc/dhcp-fwd.conf" \
- all \
-
- touch $(DHCP_FWD_DIR)/.stamp-built
-
-
-$(DHCP_FWD_BUILD_DIR)/CONTROL/control: $(DHCP_FWD_DIR)/.stamp-built
- rm -rf $(DHCP_FWD_BUILD_DIR)
- mkdir -p $(DHCP_FWD_BUILD_DIR)/usr/sbin
- cp -a $(DHCP_FWD_DIR)/dhcp-fwd $(DHCP_FWD_BUILD_DIR)/usr/sbin/
- $(STRIP) $(DHCP_FWD_BUILD_DIR)/usr/sbin/*
- cp -a $(DHCP_FWD_IPK_DIR)/root/* $(DHCP_FWD_BUILD_DIR)/
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/etc
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/etc/init.d
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/etc/init.d/*
- chmod 0644 $(DHCP_FWD_BUILD_DIR)/etc/dhcp-fwd.conf
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/usr
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/usr/sbin
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/usr/sbin/*
- cp -a $(DHCP_FWD_IPK_DIR)/CONTROL $(DHCP_FWD_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(DHCP_FWD_VERSION)-$(DHCP_FWD_RELEASE)/" $(DHCP_FWD_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(DHCP_FWD_BUILD_DIR)/CONTROL/control
-
- touch $(DHCP_FWD_BUILD_DIR)/CONTROL/control
-
-
-$(DHCP_FWD_IPK): $(DHCP_FWD_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(DHCP_FWD_BUILD_DIR)
-
-
-dhcp-fwd-ipk: ipkg-utils $(DHCP_FWD_IPK)
-
-dhcp-fwd-clean:
- rm -rf $(DHCP_FWD_IPK)
- rm -rf $(DHCP_FWD_BUILD_DIR)
- rm -rf $(DHCP_FWD_DIR)
+++ /dev/null
-#############################################################
-#
-# dhcp_relay
-#
-#############################################################
-DHCP_RELAY_SOURCE:=dhcp-3.0pl2.tar.gz
-DHCP_RELAY_SITE:=ftp://ftp.isc.org/isc/dhcp
-DHCP_RELAY_CAT:=zcat
-DHCP_RELAY_DIR:=$(BUILD_DIR)/dhcp-3.0pl2
-DHCP_RELAY_BINARY:=work.linux-2.2/relay/dhcrelay
-DHCP_RELAY_TARGET_BINARY:=usr/sbin/dhcrelay
-BVARS=PREDEFINES='-D_PATH_DHCPD_DB=\"/var/lib/dhcp/dhcpd.leases\" \
- -D_PATH_DHCLIENT_DB=\"/var/lib/dhcp/dhclient.leases\"' \
- VARDB=/var/lib/dhcp
-
-$(DL_DIR)/$(DHCP_RELAY_SOURCE):
- $(WGET) -P $(DL_DIR) $(DHCP_RELAY_SITE)/$(DHCP_RELAY_SOURCE)
-
-dhcp_relay-source: $(DL_DIR)/$(DHCP_RELAY_SOURCE)
-
-$(DHCP_RELAY_DIR)/.unpacked: $(DL_DIR)/$(DHCP_RELAY_SOURCE)
- $(DHCP_RELAY_CAT) $(DL_DIR)/$(DHCP_RELAY_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(DHCP_RELAY_DIR)/.unpacked
-
-$(DHCP_RELAY_DIR)/.configured: $(DHCP_RELAY_DIR)/.unpacked
- (cd $(DHCP_RELAY_DIR); $(TARGET_CONFIGURE_OPTS) ./configure );
- touch $(DHCP_RELAY_DIR)/.configured
-
-$(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY): $(DHCP_RELAY_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) $(BVARS) -C $(DHCP_RELAY_DIR)
- $(STRIP) $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY)
-
-$(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY): $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY)
- (cd $(TARGET_DIR)/var/lib; ln -sf /tmp dhcp)
- cp -a $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY) $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-dhcp_relay: uclibc $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY)
-
-dhcp_relay-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(DHCP_RELAY_DIR) uninstall
- -$(MAKE) -C $(DHCP_RELAY_DIR) clean
-
-dhcp_relay-dirclean:
- rm -rf $(DHCP_RELAY_DIR)
-
+++ /dev/null
-#############################################################
-#
-# diffutils
-#
-#############################################################
-DIFFUTILS_SOURCE:=diffutils-2.8.4.tar.gz
-DIFFUTILS_SITE:=ftp://alpha.gnu.org/gnu/diffutils/
-DIFFUTILS_CAT:=zcat
-DIFFUTILS_DIR:=$(BUILD_DIR)/diffutils-2.8.4
-DIFFUTILS_BINARY:=src/diff
-DIFFUTILS_TARGET_BINARY:=usr/bin/diff
-
-$(DL_DIR)/$(DIFFUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(DIFFUTILS_SITE)/$(DIFFUTILS_SOURCE)
-
-diffutils-source: $(DL_DIR)/$(DIFFUTILS_SOURCE)
-
-$(DIFFUTILS_DIR)/.unpacked: $(DL_DIR)/$(DIFFUTILS_SOURCE)
- $(DIFFUTILS_CAT) $(DL_DIR)/$(DIFFUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(DIFFUTILS_DIR)/.unpacked
-
-$(DIFFUTILS_DIR)/.configured: $(DIFFUTILS_DIR)/.unpacked
- (cd $(DIFFUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(DIFFUTILS_DIR)/.configured
-
-$(DIFFUTILS_DIR)/$(DIFFUTILS_BINARY): $(DIFFUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(DIFFUTILS_DIR)
-
-$(TARGET_DIR)/$(DIFFUTILS_TARGET_BINARY): $(DIFFUTILS_DIR)/$(DIFFUTILS_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(DIFFUTILS_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-diffutils: uclibc $(TARGET_DIR)/$(DIFFUTILS_TARGET_BINARY)
-
-diffutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(DIFFUTILS_DIR) uninstall
- -$(MAKE) -C $(DIFFUTILS_DIR) clean
-
-diffutils-dirclean:
- rm -rf $(DIFFUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# dnsmasq
-#
-#############################################################
-
-DNSMASQ_SITE=http://thekelleys.org.uk/dnsmasq
-ifeq ($(filter $(TARGETS),dnsmasq1),)
-DNSMASQ_SOURCE=dnsmasq-2.19.tar.gz
-DNSMASQ_DIR=$(BUILD_DIR)/dnsmasq-2.19
-DNSMASQ_VER=dnsmasq2
-else
-DNSMASQ_SOURCE=dnsmasq-1.18.tar.gz
-DNSMASQ_DIR=$(BUILD_DIR)/dnsmasq-1.18
-DNSMASQ_VER=dnsmasq1
-endif
-DNSMASQ_BINARY=dnsmasq
-DNSMASQ_TARGET_BINARY=usr/sbin/dnsmasq
-
-$(DL_DIR)/$(DNSMASQ_SOURCE):
- $(WGET) -P $(DL_DIR) $(DNSMASQ_SITE)/$(DNSMASQ_SOURCE)
-
-$(DNSMASQ_DIR)/.source: $(DL_DIR)/$(DNSMASQ_SOURCE)
- zcat $(DL_DIR)/$(DNSMASQ_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SOURCE_DIR)/patch-kernel.sh $(DNSMASQ_DIR) $(SOURCE_DIR) \
- $(DNSMASQ_VER)-*.patch
- touch $(DNSMASQ_DIR)/.source
-
-$(DNSMASQ_DIR)/$(DNSMASQ_BINARY): $(DNSMASQ_DIR)/.source
- $(MAKE) CC=$(TARGET_CC) CFLAGS="$(TARGET_CFLAGS)" \
- BINDIR=/usr/sbin MANDIR=/usr/man -C $(DNSMASQ_DIR)
-
-$(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY): $(DNSMASQ_DIR)/$(DNSMASQ_BINARY)
- $(MAKE) BINDIR=/usr/sbin MANDIR=/usr/man \
- DESTDIR=$(TARGET_DIR) -C $(DNSMASQ_DIR) install
- $(STRIP) $(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY)
- rm -rf $(TARGET_DIR)/usr/man
-
-dnsmasq: uclibc $(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY)
-
-dnsmasq1: uclibc $(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY)
-
-dnsmasq-source: $(DL_DIR)/$(DNSMASQ_SOURCE)
-
-dnsmasq-clean:
- #$(MAKE) prefix=$(TARGET_DIR)/usr -C $(DNSMASQ_DIR) uninstall
- -$(MAKE) -C $(DNSMASQ_DIR) clean
-
-dnsmasq-dirclean:
- rm -rf $(DNSMASQ_DIR)
+++ /dev/null
-######################################################
-#
-# An example makefile to fetch a package from sources
-# then fetch the ipkg updates required to the base package
-# extract the archives into the build tree
-# and then build the source
-#
-######################################################
-
-
-# For this example we'll use a fairly simple package that compiles easily
-# and has sources available for download at sourceforge
-DROPBEAR=dropbear-0.44
-DROPBEAR_TARGET=.built
-DROPBEAR_DIR=$(BUILD_DIR)/$(DROPBEAR)
-DROPBEAR_IPK=$(BUILD_DIR)/$(DROPBEAR)_mipsel.ipk
-DROPBEAR_IPK_DIR=$(BUILD_DIR)/$(DROPBEAR)-ipk
-
-DROPBEAR_SITE=http://matt.ucc.asn.au/dropbear/
-DROPBEAR_SOURCE=$(DROPBEAR).tar.bz2
-
-
-# We need to download sources if we dont have them
-$(DL_DIR)/$(DROPBEAR_SOURCE) :
- $(WGET) -P $(DL_DIR) $(DROPBEAR_SITE)/$(DROPBEAR_SOURCE)
-
-# if we have the sources, they do no good unless they are unpacked
-$(DROPBEAR_DIR)/.unpacked: $(DL_DIR)/$(DROPBEAR_SOURCE)
- bzcat $(DL_DIR)/$(DROPBEAR_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(SOURCE_DIR)/openwrt/ipkg/dropbear/dropbear.patch | patch -p1 -d $(DROPBEAR_DIR)
- touch $(DROPBEAR_DIR)/.unpacked
-
-# if we have the sources unpacked, we need to configure them
-$(DROPBEAR_DIR)/.configured: $(DROPBEAR_DIR)/.unpacked
- (cd $(DROPBEAR_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- LD=$(TARGET_CROSS)gcc \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --disable-zlib \
- );
- touch $(DROPBEAR_DIR)/.configured
-
-
-# now that we have it all in place, just build it
-$(DROPBEAR_DIR)/$(DROPBEAR_TARGET): $(DROPBEAR_DIR)/.configured
- mkdir -p $(DROPBEAR_IPK_DIR)/usr/bin
- cd $(DROPBEAR_DIR) && make PROGRAMS="dbclient dropbear" MULTI=1 && rm -f ssh && ln -s dbclient ssh
- $(STAGING_DIR)/bin/sstrip $(DROPBEAR_DIR)/dropbearmulti
- cd $(DROPBEAR_DIR) && cp -dpf dropbearmulti ssh dropbear dbclient $(DROPBEAR_IPK_DIR)/usr/bin
-
- cd $(DROPBEAR_DIR) && make SCPPROGRESS=1 scp
- $(STAGING_DIR)/bin/sstrip $(DROPBEAR_DIR)/scp
- cd $(DROPBEAR_DIR) && cp -dpf scp $(DROPBEAR_IPK_DIR)/usr/bin
-
- cd $(DROPBEAR_DIR) && make clean && make dropbearkey
- $(STAGING_DIR)/bin/sstrip $(DROPBEAR_DIR)/dropbearkey
- mkdir -p $(DROPBEAR_IPK_DIR)/tmp
- cd $(DROPBEAR_DIR) && cp -dpf dropbearkey $(DROPBEAR_IPK_DIR)/tmp/dropbearkey
- touch $(DROPBEAR_DIR)/$(DROPBEAR_TARGET)
-
-$(DROPBEAR_IPK): uclibc $(DROPBEAR_DIR)/$(DROPBEAR_TARGET)
- mkdir -p $(DROPBEAR_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/CONTROL/conffiles $(DROPBEAR_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/CONTROL/control $(DROPBEAR_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/CONTROL/postinst $(DROPBEAR_IPK_DIR)/CONTROL
- mkdir -p $(DROPBEAR_IPK_DIR)/etc/init.d
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/S51dropbear $(DROPBEAR_IPK_DIR)/etc/init.d
-
- cd $(BUILD_DIR); $(IPKG_BUILD) $(DROPBEAR_IPK_DIR)
-
-dropbear-ipk: $(DROPBEAR_IPK)
+++ /dev/null
-########################################################################
-#
-# ebtables
-#
-# Utility that enables basic Ethernet frame filtering on a Linux bridge,
-# MAC NAT and brouting.
-#
-########################################################################
-
-EBTABLES_NAME=ebtables
-EBTABLES_VERSION=v2.0.6
-EBTABLES_SOURCE=$(EBTABLES_NAME)-$(EBTABLES_VERSION).tar.gz
-#EBTABLES_SOURCE_URL=http://unc.dl.sourceforge.net/sourceforge/$(EBTABLES_NAME)/
-EBTABLES_SOURCE_URL=http://aleron.dl.sourceforge.net/sourceforge/$(EBTABLES_NAME)/
-EBTABLES_BUILD_DIR=$(BUILD_DIR)/$(EBTABLES_NAME)-$(EBTABLES_VERSION)
-
-$(DL_DIR)/$(EBTABLES_SOURCE):
- $(WGET) -P $(DL_DIR) $(EBTABLES_SOURCE_URL)/$(EBTABLES_SOURCE)
-
-$(EBTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(EBTABLES_SOURCE)
- zcat $(DL_DIR)/$(EBTABLES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(EBTABLES_BUILD_DIR)/.unpacked
-
-$(EBTABLES_BUILD_DIR)/.configured: $(EBTABLES_BUILD_DIR)/.unpacked
- # Allow patches. Needed for openwrt for instance.
- $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) $(EBTABLES_NAME)-*.patch
- touch $(EBTABLES_BUILD_DIR)/.configured
-
-$(EBTABLES_BUILD_DIR)/$(EBTABLES_NAME): $(EBTABLES_BUILD_DIR)/.configured
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(EBTABLES_BUILD_DIR) \
- CC=$(TARGET_CC) CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)"
-
-$(TARGET_DIR)/sbin/$(EBTABLES_NAME): $(EBTABLES_BUILD_DIR)/$(EBTABLES_NAME)
- mkdir -p $(TARGET_DIR)/sbin/
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(EBTABLES_BUILD_DIR) \
- MANDIR=$(TARGET_DIR)/usr/share/man \
- ETHERTYPESPATH=${D}/etc/ \
- BINPATH=$(TARGET_DIR)/sbin/ \
- CC=$(TARGET_CC) \
- CFLAGS="$(TARGET_CFLAGS)" \
- install
- $(STRIP) $(TARGET_DIR)/sbin/$(EBTABLES_NAME)
- rm -rf $(TARGET_DIR)/usr/share/man
-
-$(EBTABLES_NAME): $(TARGET_DIR)/sbin/$(EBTABLES_NAME)
-
-$(EBTABLES_NAME)-source: $(DL_DIR)/$(EBTABLES_SOURCE)
-
-$(EBTABLES_NAME)-clean:
- -$(MAKE) -C $(EBTABLES_BUILD_DIR) clean
-
-$(EBTABLES_NAME)-dirclean:
- rm -rf $(EBTABLES_BUILD_DIR)
+++ /dev/null
-#############################################################
-#
-# ed
-#
-#############################################################
-ED_SOURCE:=ed_0.2.orig.tar.gz
-ED_PATCH:=ed_0.2-19.diff.gz
-ED_SITE:=http://ftp.debian.org/debian/pool/main/e/ed
-ED_CAT:=zcat
-ED_DIR:=$(BUILD_DIR)/ed-0.2
-ED_BINARY:=ed
-ED_TARGET_BINARY:=bin/ed
-
-$(DL_DIR)/$(ED_SOURCE):
- $(WGET) -P $(DL_DIR) $(ED_SITE)/$(ED_SOURCE)
-
-$(DL_DIR)/$(ED_PATCH):
- $(WGET) -P $(DL_DIR) $(ED_SITE)/$(ED_PATCH)
-
-ed-source: $(DL_DIR)/$(ED_SOURCE) $(DL_DIR)/$(ED_PATCH)
-
-$(ED_DIR)/.unpacked: $(DL_DIR)/$(ED_SOURCE) $(DL_DIR)/$(ED_PATCH)
- $(ED_CAT) $(DL_DIR)/$(ED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SOURCE_DIR)/patch-kernel.sh $(ED_DIR) $(DL_DIR) $(ED_PATCH)
- touch $(ED_DIR)/.unpacked
-
-$(ED_DIR)/.configured: $(ED_DIR)/.unpacked
- (cd $(ED_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- $(DISABLE_NLS) \
- );
- touch $(ED_DIR)/.configured
-
-$(ED_DIR)/$(ED_BINARY): $(ED_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(ED_DIR)
-
-$(TARGET_DIR)/$(ED_TARGET_BINARY): $(ED_DIR)/$(ED_BINARY)
- cp -a $(ED_DIR)/$(ED_BINARY) $(TARGET_DIR)/$(ED_TARGET_BINARY)
-
-ed: uclibc $(TARGET_DIR)/$(ED_TARGET_BINARY)
-
-ed-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(ED_DIR) uninstall
- -$(MAKE) -C $(ED_DIR) clean
-
-ed-dirclean:
- rm -rf $(ED_DIR)
-
+++ /dev/null
-#############################################################
-#
-# genext2fs to build to target ext2 filesystems
-#
-#############################################################
-GENEXT2_DIR=$(BUILD_DIR)/genext2fs-1.3
-GENEXT2_SOURCE=genext2fs_1.3.orig.tar.gz
-GENEXT2_SITE=http://ftp.debian.org/debian/pool/main/g/genext2fs
-GENEXT2_PATCH=$(SOURCE_DIR)/genext2fs.patch
-
-$(DL_DIR)/$(GENEXT2_SOURCE):
- $(WGET) -P $(DL_DIR) $(GENEXT2_SITE)/$(GENEXT2_SOURCE)
-
-$(GENEXT2_DIR): $(DL_DIR)/$(GENEXT2_SOURCE) $(GENEXT2_PATCH)
- zcat $(DL_DIR)/$(GENEXT2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(GENEXT2_DIR).orig $(GENEXT2_DIR)
- cat $(GENEXT2_PATCH) | patch -p1 -d $(GENEXT2_DIR)
-
-$(GENEXT2_DIR)/genext2fs: $(GENEXT2_DIR)
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE \
- -D_FILE_OFFSET_BITS=64" -C $(GENEXT2_DIR);
- touch -c $(GENEXT2_DIR)/genext2fs
-
-genext2fs: $(GENEXT2_DIR)/genext2fs
-
-
-
-#############################################################
-#
-# Build the ext2 root filesystem image
-#
-#############################################################
-
-# How much KB we want to add to the calculated size for slack space
-#GENEXT2_ADDTOROOTSIZE=4096
-GENEXT2_ADDTOROOTSIZE=16384
-GENEXT2_REALSIZE=$(subst total,, $(shell LANG=C du $(TARGET_DIR) -s -c -k | grep total ))
-GENEXT2_SIZE=$(shell expr $(GENEXT2_REALSIZE) + $(GENEXT2_ADDTOROOTSIZE))
-# We currently add about 400 device nodes, so add that into the total
-GENEXT2_INODES=$(shell expr $(shell find $(TARGET_DIR) | wc -l) + 400)
-#GENEXT2_SIZE=100000
-
-ext2root: genext2fs
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true;
- $(GENEXT2_DIR)/genext2fs -i $(GENEXT2_INODES) -b $(GENEXT2_SIZE) \
- -d $(TARGET_DIR) -q -D $(SOURCE_DIR)/device_table.txt $(IMAGE)
-
-ext2root-source: $(DL_DIR)/$(GENEXT2_SOURCE)
-
-ext2root-clean:
- -$(MAKE) -C $(GENEXT2_DIR) clean
-
-ext2root-dirclean:
- rm -rf $(GENEXT2_DIR)
-
+++ /dev/null
-#############################################################
-#
-# fakeroot
-#
-#############################################################
-FAKEROOT_SOURCE:=fakeroot_0.7.5.tar.gz
-FAKEROOT_SITE:=http://ftp.debian.org/debian/pool/main/f/fakeroot
-FAKEROOT_CAT:=zcat
-FAKEROOT_DIR:=$(BUILD_DIR)/fakeroot-0.7.5
-
-
-$(DL_DIR)/$(FAKEROOT_SOURCE):
- $(WGET) -P $(DL_DIR) $(FAKEROOT_SITE)/$(FAKEROOT_SOURCE)
-
-fakeroot-source: $(DL_DIR)/$(FAKEROOT_SOURCE)
-
-$(FAKEROOT_DIR)/.unpacked: $(DL_DIR)/$(FAKEROOT_SOURCE)
- $(FAKEROOT_CAT) $(DL_DIR)/$(FAKEROOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # If using busybox getopt, make it be quiet.
- $(SED) "s,getopt --version,getopt --version 2>/dev/null," \
- $(FAKEROOT_DIR)/scripts/fakeroot
- touch $(FAKEROOT_DIR)/.unpacked
-
-$(FAKEROOT_DIR)/.configured: $(FAKEROOT_DIR)/.unpacked
- (cd $(FAKEROOT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libdir=/usr/lib/libfakeroot \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(FAKEROOT_DIR)/.configured
-
-$(FAKEROOT_DIR)/faked: $(FAKEROOT_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(FAKEROOT_DIR)
-
-$(TARGET_DIR)/usr/bin/fakeroot: $(FAKEROOT_DIR)/faked
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(FAKEROOT_DIR) install
- -mv $(TARGET_DIR)/usr/bin/$(ARCH)-linux-faked $(TARGET_DIR)/usr/bin/faked
- -mv $(TARGET_DIR)/usr/bin/$(ARCH)-linux-fakeroot $(TARGET_DIR)/usr/bin/fakeroot
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-fakeroot: uclibc $(TARGET_DIR)/usr/bin/fakeroot
-
-fakeroot-clean:
- $(MAKE) -C $(FAKEROOT_DIR) clean
-
-fakeroot-dirclean:
- rm -rf $(FAKEROOT_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# file
-#
-#############################################################
-FILE_SOURCE:=file-4.08.tar.gz
-FILE_SITE:=ftp://ftp.astron.com/pub/file
-FILE_DIR:=$(BUILD_DIR)/file-4.08
-FILE_CAT:=zcat
-FILE_BINARY:=src/file
-FILE_TARGET_BINARY:=usr/bin/file
-
-$(DL_DIR)/$(FILE_SOURCE):
- $(WGET) -P $(DL_DIR) $(FILE_SITE)/$(FILE_SOURCE)
-
-file-source: $(DL_DIR)/$(FILE_SOURCE)
-
-$(FILE_DIR)/.unpacked: $(DL_DIR)/$(FILE_SOURCE)
- $(FILE_CAT) $(DL_DIR)/$(FILE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(SOURCE_DIR)/file.patch | patch -p1 -d $(FILE_DIR)
- touch $(FILE_DIR)/.unpacked
-
-$(FILE_DIR)/.configured: $(FILE_DIR)/.unpacked
- (cd $(FILE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share/misc \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --disable-fsect-man5 \
- );
- touch $(FILE_DIR)/.configured
-
-$(FILE_DIR)/$(FILE_BINARY): $(FILE_DIR)/.configured
- $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(FILE_DIR)
-
-$(TARGET_DIR)/$(FILE_TARGET_BINARY): $(FILE_DIR)/$(FILE_BINARY)
- $(MAKE) $(TARGET_CONFIGURE_OPTS) DESTDIR=$(TARGET_DIR) -C $(FILE_DIR) install
- -($(STRIP) $(TARGET_DIR)/usr/lib/libmagic.so.*.* > /dev/null 2>&1)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-file: zlib uclibc $(TARGET_DIR)/$(FILE_TARGET_BINARY)
-
-file-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(FILE_DIR) uninstall
- -$(MAKE) -C $(FILE_DIR) clean
-
-file-dirclean:
- rm -rf $(FILE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# findutils
-#
-#############################################################
-FINDUTILS_SOURCE:=findutils_4.1.7.orig.tar.gz
-FINDUTILS_SITE:=http://ftp.debian.org/debian/pool/main/f/findutils
-FINDUTILS_CAT:=zcat
-FINDUTILS_DIR:=$(BUILD_DIR)/findutils-4.1.7
-FINDUTILS_BINARY:=find/find
-FINDUTILS_TARGET_BINARY:=usr/bin/find
-
-$(DL_DIR)/$(FINDUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(FINDUTILS_SITE)/$(FINDUTILS_SOURCE)
-
-findutils-source: $(DL_DIR)/$(FINDUTILS_SOURCE)
-
-$(FINDUTILS_DIR)/.unpacked: $(DL_DIR)/$(FINDUTILS_SOURCE)
- $(FINDUTILS_CAT) $(DL_DIR)/$(FINDUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(FINDUTILS_DIR).orig $(FINDUTILS_DIR)
- touch $(FINDUTILS_DIR)/.unpacked
-
-$(FINDUTILS_DIR)/.configured: $(FINDUTILS_DIR)/.unpacked
- (cd $(FINDUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_setvbuf_reversed=no \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(FINDUTILS_DIR)/.configured
-
-$(FINDUTILS_DIR)/$(FINDUTILS_BINARY): $(FINDUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(FINDUTILS_DIR)
-
-# This stuff is needed to work around GNU make deficiencies
-findutils-target_binary: $(FINDUTILS_DIR)/$(FINDUTILS_BINARY)
- @if [ -L $(TARGET_DIR)/$(FINDUTILS_TARGET_BINARY) ] ; then \
- rm -f $(TARGET_DIR)/$(FINDUTILS_TARGET_BINARY); fi;
- @if [ ! -f $(FINDUTILS_DIR)/$(FINDUTILS_BINARY) -o $(TARGET_DIR)/$(FINDUTILS_TARGET_BINARY) \
- -ot $(FINDUTILS_DIR)/$(FINDUTILS_BINARY) ] ; then \
- set -x; \
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(FINDUTILS_DIR) install; \
- $(STRIP) $(TARGET_DIR)/usr/lib/locate/* > /dev/null 2>&1; \
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc; fi;
-
-findutils: uclibc findutils-target_binary
-
-findutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(FINDUTILS_DIR) uninstall
- -$(MAKE) -C $(FINDUTILS_DIR) clean
-
-findutils-dirclean:
- rm -rf $(FINDUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# flex
-#
-#############################################################
-FLEX_SOURCE:=flex_2.5.4a.orig.tar.gz
-FLEX_PATCH:=flex_2.5.4a-24.diff.gz
-FLEX_SITE:=http://ftp.debian.org/debian/pool/main/f/flex
-FLEX_DIR:=$(BUILD_DIR)/flex-2.5.4
-FLEX_CAT:=zcat
-FLEX_BINARY:=flex
-FLEX_TARGET_BINARY:=usr/bin/flex
-
-$(DL_DIR)/$(FLEX_SOURCE):
- $(WGET) -P $(DL_DIR) $(FLEX_SITE)/$(FLEX_SOURCE)
-
-$(DL_DIR)/$(FLEX_PATCH):
- $(WGET) -P $(DL_DIR) $(FLEX_SITE)/$(FLEX_PATCH)
-
-flex-source: $(DL_DIR)/$(FLEX_SOURCE) $(DL_DIR)/$(FLEX_PATCH)
-
-$(FLEX_DIR)/.unpacked: $(DL_DIR)/$(FLEX_SOURCE) $(DL_DIR)/$(FLEX_PATCH)
- $(FLEX_CAT) $(DL_DIR)/$(FLEX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #$(SOURCE_DIR)/patch-kernel.sh $(FLEX_DIR) $(DL_DIR) $(FLEX_PATCH)
- touch $(FLEX_DIR)/.unpacked
-
-$(FLEX_DIR)/.configured: $(FLEX_DIR)/.unpacked
- (cd $(FLEX_DIR); autoconf; rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(FLEX_DIR)/.configured
-
-$(FLEX_DIR)/$(FLEX_BINARY): $(FLEX_DIR)/.configured
- $(MAKE) -C $(FLEX_DIR)
-
-$(TARGET_DIR)/$(FLEX_TARGET_BINARY): $(FLEX_DIR)/$(FLEX_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- sharedstatedir=$(TARGET_DIR)/usr/com \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(FLEX_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- (cd $(TARGET_DIR)/usr/bin; ln -s flex lex)
-
-flex: uclibc $(TARGET_DIR)/$(FLEX_TARGET_BINARY)
-
-flex-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(FLEX_DIR) uninstall
- -$(MAKE) -C $(FLEX_DIR) clean
-
-flex-dirclean:
- rm -rf $(FLEX_DIR)
-
+++ /dev/null
-## fprobe
-
-FPROBE_VERSION:=1.0.5
-FPROBE_RELEASE:=1
-
-FPROBE_SOURCE:=fprobe-$(FPROBE_VERSION).tar.bz2
-FPROBE_SITE:=http://dl.sourceforge.net/sourceforge/fprobe/
-FPROBE_DIR:=$(BUILD_DIR)/fprobe-$(FPROBE_VERSION)
-FPROBE_CAT:=bzcat
-
-FPROBE_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/fprobe
-
-FPROBE_BUILD_DIR := $(BUILD_DIR)/fprobe_$(FPROBE_VERSION)-$(FPROBE_RELEASE)
-FPROBE_IPK_DIR := $(OPENWRT_IPK_DIR)/fprobe
-FPROBE_IPK := $(FPROBE_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(FPROBE_SOURCE):
- $(WGET) -P $(DL_DIR) $(FPROBE_SITE)/$(FPROBE_SOURCE)
-
-
-$(FPROBE_DIR)/.stamp-unpacked: $(DL_DIR)/$(FPROBE_SOURCE)
- $(FPROBE_CAT) $(DL_DIR)/$(FPROBE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(FPROBE_DIR)/.stamp-unpacked
-
-
-$(FPROBE_DIR)/.stamp-configured: $(FPROBE_DIR)/.stamp-unpacked
- cd $(FPROBE_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- --includedir=/usr/include \
- --libdir=/usr/lib \
- $(DISABLE_NLS) \
- --with-membulk=index8 \
- --with-hash=xor8
-
- touch $(FPROBE_DIR)/.stamp-configured
-
-
-$(FPROBE_DIR)/.stamp-built: $(FPROBE_DIR)/.stamp-configured
- cd $(FPROBE_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
-
- touch $(FPROBE_DIR)/.stamp-built
-
-
-$(FPROBE_DIR)/.stamp-installed: $(FPROBE_DIR)/.stamp-built
- mkdir -p $(FPROBE_BUILD_DIR)
- cd $(FPROBE_DIR) ; \
- $(MAKE) \
- DESTDIR="$(FPROBE_BUILD_DIR)" \
- install \
-
- install -m0755 -d $(FPROBE_BUILD_DIR)/etc
- install -m0644 $(FPROBE_IPK_DIR)/root/etc/fprobe.conf $(FPROBE_BUILD_DIR)/etc/
-
- install -m0755 -d $(FPROBE_BUILD_DIR)/etc/init.d
- install -m0755 $(FPROBE_IPK_DIR)/root/etc/init.d/fprobe $(FPROBE_BUILD_DIR)/etc/init.d/
-
- rm -rf $(FPROBE_BUILD_DIR)/usr/share
-
- $(STRIP) $(FPROBE_BUILD_DIR)/usr/sbin/*
-
- touch $(FPROBE_DIR)/.stamp-installed
-
-
-$(FPROBE_IPK): $(FPROBE_DIR)/.stamp-installed
- cp -a $(FPROBE_IPK_DIR)/CONTROL $(FPROBE_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(FPROBE_VERSION)-$(FPROBE_RELEASE)/" $(FPROBE_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(FPROBE_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(FPROBE_BUILD_DIR)
-
-
-fprobe-source: $(DL_DIR)/$(FPROBE_SOURCE)
-
-fprobe-ipk: ipkg-utils libpcap-ipk $(FPROBE_IPK)
-
-fprobe-clean:
- $(MAKE) -C $(FPROBE_DIR) clean
-
-fprobe-clean-all:
- rm -rf $(FPROBE_DIR)
- rm -rf $(FPROBE_BUILD_DIR)
- rm -rf $(FPROBE_IPK)
+++ /dev/null
-#############################################################
-#
-# gawk
-#
-#############################################################
-GAWK_SOURCE:=gawk-3.1.2.tar.gz
-GAWK_SITE:=ftp://ftp.gnu.org/gnu/gawk
-GAWK_CAT:=zcat
-GAWK_DIR:=$(BUILD_DIR)/gawk-3.1.2
-GAWK_BINARY:=gawk
-GAWK_TARGET_BINARY:=usr/bin/gawk
-
-$(DL_DIR)/$(GAWK_SOURCE):
- $(WGET) -P $(DL_DIR) $(GAWK_SITE)/$(GAWK_SOURCE)
-
-gawk-source: $(DL_DIR)/$(GAWK_SOURCE)
-
-$(GAWK_DIR)/.unpacked: $(DL_DIR)/$(GAWK_SOURCE)
- $(GAWK_CAT) $(DL_DIR)/$(GAWK_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GAWK_DIR)/.unpacked
-
-$(GAWK_DIR)/.configured: $(GAWK_DIR)/.unpacked
- (cd $(GAWK_DIR); rm -rf config.cache; autoconf; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_getpgrp_void=yes \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(GAWK_DIR)/.configured
-
-$(GAWK_DIR)/$(GAWK_BINARY): $(GAWK_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GAWK_DIR)
-
-$(TARGET_DIR)/$(GAWK_TARGET_BINARY): $(GAWK_DIR)/$(GAWK_BINARY)
- rm -f $(TARGET_DIR)/usr/bin/awk
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GAWK_DIR) install
- rm -f $(TARGET_DIR)/usr/bin/gawk-*
- (cd $(TARGET_DIR)/usr/bin; ln -sf gawk awk)
- $(STRIP) $(TARGET_DIR)/usr/lib/awk/* > /dev/null 2>&1
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-gawk: uclibc $(TARGET_DIR)/$(GAWK_TARGET_BINARY)
-
-gawk-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GAWK_DIR) uninstall
- -$(MAKE) -C $(GAWK_DIR) clean
-
-gawk-dirclean:
- rm -rf $(GAWK_DIR)
-
+++ /dev/null
-# Makefile for to build a gcc/uClibc toolchain
-#
-# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-ifeq ($(GCC_2_95_TOOLCHAIN),true)
-
-GCC_SITE:=http://www.uclibc.org/downloads/toolchain
-GCC_SOURCE:=gcc-20011006.tar.bz2
-GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-20011006
-GCC_CAT:=bzcat
-
-STLPORT_SITE=http://www.stlport.org/archive
-STLPORT_SOURCE=STLport-4.5.3.tar.gz
-STLPORT_DIR=$(TOOL_BUILD_DIR)/STLport-4.5.3
-GCC_STRIP_HOST_BINARIES:=true
-
-#############################################################
-#
-# Setup some initial stuff
-#
-#############################################################
-
-ifeq ($(INSTALL_LIBSTDCPP),true)
-TARGET_LANGUAGES:=c,c++
-STLPORT_TARGET=stlport
-else
-TARGET_LANGUAGES:=c
-STLPORT_TARGET=
-endif
-
-#############################################################
-#
-# build the first pass gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc2_95-initial
-
-$(DL_DIR)/$(GCC_SOURCE):
- $(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
-
-$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
- $(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(GCC_DIR)/.unpacked
-
-$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
- # Apply any files named gcc-*.patch from the source directory to gcc
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc2.95-mega.patch.bz2
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc2.95-uclibc-conf.patch
- #$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc2_95*.patch
- #
- # We do not wish to build the libstdc++ library provided with gcc,
- # since it doesn't seem to work at all with uClibc plus gcc 2.95...
- #
- mv $(GCC_DIR)/libstdc++ $(GCC_DIR)/libstdc++.orig
- mv $(GCC_DIR)/libio $(GCC_DIR)/libio.orig
- #
- touch $(GCC_DIR)/.patched
-
-# The --without-headers option stopped working with gcc 3.0 and has never been
-# # fixed, so we need to actually have working C library header files prior to
-# # the step or libgcc will not build...
-$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
- mkdir -p $(GCC_BUILD_DIR1)
- -mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include
- # Important! Required for limits.h to be fixed.
- ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
- (cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=c \
- --disable-shared \
- --includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \
- --with-headers=$(TOOL_BUILD_DIR)/uClibc_dev/usr/include \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR1)/.configured
-
-$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
- touch $(GCC_BUILD_DIR1)/.compiled
-
-$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
- #rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
- #rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
-
-gcc2_95_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
-
-gcc2_95_initial-clean:
- rm -rf $(GCC_BUILD_DIR1)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc2_95_initial-dirclean:
- rm -rf $(GCC_BUILD_DIR1)
-
-#############################################################
-#
-# STLport -- an alternative C++ library
-#
-#############################################################
-STLPORT_PATCH=$(SOURCE_DIR)/STLport-4.5.3.patch
-
-$(DL_DIR)/$(STLPORT_SOURCE):
- $(WGET) -P $(DL_DIR) $(STLPORT_SITE)/$(STLPORT_SOURCE)
-
-$(STLPORT_DIR)/Makefile: $(DL_DIR)/$(STLPORT_SOURCE) $(STLPORT_PATCH)
- zcat $(DL_DIR)/$(STLPORT_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- cat $(STLPORT_PATCH) | patch -d $(STLPORT_DIR) -p1
-
-$(STLPORT_DIR)/lib/libstdc++.a: $(STLPORT_DIR)/Makefile
- $(MAKE) ARCH=$(OPTIMIZE_FOR_CPU) PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME) -C $(STLPORT_DIR)
-
-$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.a: $(STLPORT_DIR)/lib/libstdc++.a
- $(MAKE) ARCH=$(OPTIMIZE_FOR_CPU) PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME) -C $(STLPORT_DIR) install
-
-stlport: $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.a
-
-stlport-source: $(DL_DIR)/$(STLPORT_SOURCE)
-
-stlport-clean:
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++*
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++*
- -$(MAKE) -C $(STLPORT_DIR) clean
-
-stlport-dirclean:
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++*
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/g++-v3*
- rm -rf $(STLPORT_DIR)
-
-#############################################################
-#
-# second pass compiler build. Build the compiler targeting
-# the newly built shared uClibc library.
-#
-#############################################################
-GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc2_95-final
-
-$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
- mkdir -p $(GCC_BUILD_DIR2)
- (cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR2)/.configured
-
-$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
- touch $(GCC_BUILD_DIR2)/.compiled
-
-$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
- # Strip the host binaries
-ifeq ($(GCC_STRIP_HOST_BINARIES),true)
- -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
-endif
- # Set up the symlinks to enable lying about target name.
- set -e; \
- (cd $(STAGING_DIR); \
- ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
- cd bin; \
- for app in $(REAL_GNU_TARGET_NAME)-* ; do \
- ln -sf $${app} \
- $(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
- done; \
- );
- touch $(GCC_BUILD_DIR2)/.installed
-
-gcc2_95: uclibc-configured binutils gcc2_95_initial $(LIBFLOAT_TARGET) uclibc \
- $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS) $(STLPORT_TARGET)
-
-gcc2_95-source: $(DL_DIR)/$(GCC_SOURCE)
-
-gcc2_95-clean:
- rm -rf $(GCC_BUILD_DIR2)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc2_95-dirclean:
- rm -rf $(GCC_BUILD_DIR2)
-
-#############################################################
-#
-# Next build target gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc2_95-target
-
-$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
- mkdir -p $(GCC_BUILD_DIR3)
- (cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=/usr \
- --build=$(GNU_HOST_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=/usr/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR3)/.configured
-
-$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
- touch $(GCC_BUILD_DIR3)/.compiled
-
-$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
- # Remove broken specs file (cross compile flag is set).
- rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
- -(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
- #
- rm -f $(TARGET_DIR)/usr/lib/*.la*
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Work around problem of missing syslimits.h
- cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/
- # These are in /lib, so...
- #rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
- #touch -c $(TARGET_DIR)/usr/bin/gcc
-
-gcc2_95_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
-
-gcc2_95_target-clean:
- rm -rf $(GCC_BUILD_DIR3)
- rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc2_95_target-dirclean:
- rm -rf $(GCC_BUILD_DIR3)
-
-endif
+++ /dev/null
-# Makefile for to build a gcc/uClibc toolchain
-#
-# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-ifneq ($(GCC_2_95_TOOLCHAIN),true)
-
-# Shiny new stuff...
-GCC_VERSION:=3.3.3
-GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/releases/gcc-$(GCC_VERSION)
-#GCC_SITE:=http://www.binarycode.org/gcc/releases/gcc-$(GCC_VERSION)
-#GCC_SITE:=http://gcc.get-software.com/releases/gcc-$(GCC_VERSION)
-
-#
-# snapshots....
-#GCC_VERSION:=3.3-20031013
-#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION)
-#
-GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
-GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)
-GCC_CAT:=bzcat
-GCC_STRIP_HOST_BINARIES:=true
-
-#############################################################
-#
-# Setup some initial stuff
-#
-#############################################################
-
-ifeq ($(INSTALL_LIBGCJ),true)
-TARGET_LANGUAGES:=c,c++,java
-else
-ifeq ($(INSTALL_LIBSTDCPP),true)
-TARGET_LANGUAGES:=c,c++
-else
-TARGET_LANGUAGES:=c
-endif
-endif
-
-#############################################################
-#
-# build the first pass gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-3.3-initial
-
-$(DL_DIR)/$(GCC_SOURCE):
- $(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
-
-$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
- $(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(GCC_DIR)/.unpacked
-
-$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
- # Apply any files named gcc-*.patch from the source directory to gcc
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc3.3-mega.patch.bz2
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc-3.3*.patch
-ifeq ($(SOFT_FLOAT),true)
-ifeq ("$(strip $(ARCH))","i386")
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) i386-gcc-soft-float.patch
-endif
-endif
- touch $(GCC_DIR)/.patched
-
-# The --without-headers option stopped working with gcc 3.0 and has never been
-# # fixed, so we need to actually have working C library header files prior to
-# # the step or libgcc will not build...
-$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
- mkdir -p $(GCC_BUILD_DIR1)
- -mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include
- (cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=c \
- --disable-shared \
- --includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \
- --with-sysroot=$(TOOL_BUILD_DIR)/uClibc_dev/ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR1)/.configured
-
-$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
- touch $(GCC_BUILD_DIR1)/.compiled
-
-$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
- #rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
- #rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
-
-gcc3_3_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
-
-gcc3_3_initial-clean:
- rm -rf $(GCC_BUILD_DIR1)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc3_3_initial-dirclean:
- rm -rf $(GCC_BUILD_DIR1)
-
-#############################################################
-#
-# second pass compiler build. Build the compiler targeting
-# the newly built shared uClibc library.
-#
-#############################################################
-GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-3.3-final
-$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
- mkdir -p $(GCC_BUILD_DIR2)
- # Important! Required for limits.h to be fixed.
- ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
- (cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(GCC_USE_SJLJ_EXCEPTIONS) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR2)/.configured
-
-$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
- touch $(GCC_BUILD_DIR2)/.compiled
-
-$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
- # Strip the host binaries
-ifeq ($(GCC_STRIP_HOST_BINARIES),true)
- -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
-endif
- # Set up the symlinks to enable lying about target name.
- set -e; \
- (cd $(STAGING_DIR); \
- ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
- cd bin; \
- for app in $(REAL_GNU_TARGET_NAME)-* ; do \
- ln -sf $${app} \
- $(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
- done; \
- );
-ifeq ($(SOFT_FLOAT),true)
- # Replace specs file with one that defaults to soft float mode.
- if [ ! -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
- echo staging dir specs file is missing ; \
- /bin/false ; \
- fi;
- cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-endif
- touch $(GCC_BUILD_DIR2)/.installed
-
-gcc3_3: uclibc-configured binutils gcc3_3_initial $(LIBFLOAT_TARGET) uclibc \
- $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS)
-
-gcc3_3-source: $(DL_DIR)/$(GCC_SOURCE)
-
-gcc3_3-clean:
- rm -rf $(GCC_BUILD_DIR2)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc3_3-dirclean:
- rm -rf $(GCC_BUILD_DIR2)
-
-#############################################################
-#
-# Next build target gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-3.3-target
-
-$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
- mkdir -p $(GCC_BUILD_DIR3)
- (cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=/usr \
- --build=$(GNU_HOST_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=/usr/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(GCC_USE_SJLJ_EXCEPTIONS) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR3)/.configured
-
-$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
- touch $(GCC_BUILD_DIR3)/.compiled
-
-$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
-ifeq ($(SOFT_FLOAT),true)
- # Replace specs file with one that defaults to soft float mode.
- if [ ! -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
- echo target dir specs file is missing ; \
- /bin/false ; \
- fi;
- cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
- # Make sure gcc does not think we are cross compiling
- $(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-else
- # Remove broken specs file (cross compile flag is set).
- rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-endif
- -(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
- #
- rm -f $(TARGET_DIR)/usr/lib/*.la*
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Work around problem of missing syslimits.h
- cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/
- # These are in /lib, so...
- #rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
- #touch -c $(TARGET_DIR)/usr/bin/gcc
-
-gcc3_3_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
-
-gcc3_3_target-clean:
- rm -rf $(GCC_BUILD_DIR3)
- rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc3_3_target-dirclean:
- rm -rf $(GCC_BUILD_DIR3)
-
-endif
+++ /dev/null
-#############################################################
-#
-# gdb
-#
-#############################################################
-
-GDB_SITE:=ftp://ftp.gnu.org/gnu/gdb/
-GDB_DIR:=$(BUILD_DIR)/gdb-5.3
-GDB_SOURCE:=gdb-5.3.tar.gz
-GDB_PATCH:=$(SOURCE_DIR)/gdb.patch
-GDB_UCLIBC_PATCH:=$(SOURCE_DIR)/gdb-5.3-uclibc.patch
-
-$(DL_DIR)/$(GDB_SOURCE):
- $(WGET) -P $(DL_DIR) $(GDB_SITE)/$(GDB_SOURCE)
-
-$(GDB_DIR)/.unpacked: $(DL_DIR)/$(GDB_SOURCE) $(GDB_PATCH)
- gunzip -c $(DL_DIR)/$(GDB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(GDB_PATCH) | patch -p1 -d $(GDB_DIR)
- cat $(GDB_UCLIBC_PATCH) | patch -p1 -d $(GDB_DIR)
- touch $(GDB_DIR)/.unpacked
-
-$(GDB_DIR)/.configured: $(GDB_DIR)/.unpacked
- # Copy a config.sub from gcc. This is only necessary until
- # gdb's config.sub supports <arch>-linux-uclibc tuples.
- cp $(GCC_DIR)/config.sub $(GDB_DIR)
- cp $(GCC_DIR)/config.sub $(GDB_DIR)/readline/support/
- (cd $(GDB_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_type_uintptr_t=yes \
- gt_cv_func_gettext_libintl=yes \
- ac_cv_func_dcgettext=yes \
- gdb_cv_func_sigsetjmp=yes \
- bash_cv_func_strcoll_broken=no \
- bash_cv_must_reinstall_sighandlers=no \
- bash_cv_func_sigsetjmp=present \
- ./configure \
- --target=$(REAL_GNU_TARGET_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --includedir=$(STAGING_DIR)/include \
- $(DISABLE_NLS) \
- --without-uiout --disable-gdbmi \
- --disable-tui --disable-gdbtk --without-x \
- --disable-sim --enable-gdbserver \
- --without-included-gettext \
- );
-ifeq ($(ENABLE_LOCALE),true)
- -$(SED) "s,^INTL *=.*,INTL = -lintl,g;" $(GDB_DIR)/gdb/Makefile
-endif
- touch $(GDB_DIR)/.configured
-
-$(GDB_DIR)/gdb/gdb: $(GDB_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GDB_DIR)
- $(STRIP) $(GDB_DIR)/gdb/gdb
-
-$(TARGET_DIR)/usr/bin/gdb: $(GDB_DIR)/gdb/gdb
- install -c $(GDB_DIR)/gdb/gdb $(TARGET_DIR)/usr/bin/gdb
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-gdb: $(TARGET_DIR)/usr/bin/gdb
-
-gdb-source: $(DL_DIR)/$(GDB_SOURCE)
-
-gdb-clean:
- $(MAKE) -C $(GDB_DIR) clean
-
-gdb-dirclean:
- rm -rf $(GDB_DIR)
-
+++ /dev/null
-#############################################################
-#
-# gdbserver
-#
-#############################################################
-
-#Use GDB_DIR/etc values from gdb.mk
-#Build gdbserver in a dir outside of the main gdb tree
-GDB_WDIR:=$(BUILD_DIR)/gdbserver
-
-
-$(GDB_WDIR)/.configured: $(GDB_DIR)/.unpacked
- mkdir -p $(GDB_WDIR)
- (cd $(GDB_WDIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(GDB_DIR)/gdb/gdbserver/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --includedir=$(STAGING_DIR)/include \
- $(DISABLE_NLS) \
- --without-uiout --disable-gdbmi \
- --disable-tui --disable-gdbtk --without-x \
- --without-included-gettext \
- );
- touch $(GDB_WDIR)/.configured
-
-$(GDB_WDIR)/gdbserver: $(GDB_WDIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GDB_WDIR)
- $(STRIP) $(GDB_WDIR)/gdbserver
-
-$(TARGET_DIR)/usr/bin/gdbserver: $(GDB_WDIR)/gdbserver
- install -c $(GDB_WDIR)/gdbserver $(TARGET_DIR)/usr/bin/gdbserver
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-gdbserver: $(TARGET_DIR)/usr/bin/gdbserver
-
-gdbserver-clean:
- $(MAKE) -C $(GDB_WDIR) clean
-
-gdbserver-dirclean:
- rm -rf $(GDB_WDIR)
-
+++ /dev/null
-#############################################################
-#
-# gettext
-#
-#############################################################
-GETTEXT_SOURCE:=gettext-0.11.5.tar.gz
-GETTEXT_SITE:=ftp://ftp.gnu.org/gnu/gettext
-GETTEXT_DIR:=$(BUILD_DIR)/gettext-0.11.5
-GETTEXT_CAT:=zcat
-GETTEXT_BINARY:=gettext
-GETTEXT_TARGET_BINARY:=usr/bin/gettext
-
-$(DL_DIR)/$(GETTEXT_SOURCE):
- $(WGET) -P $(DL_DIR) $(GETTEXT_SITE)/$(GETTEXT_SOURCE)
-
-gettext-source: $(DL_DIR)/$(GETTEXT_SOURCE)
-
-$(GETTEXT_DIR)/.unpacked: $(DL_DIR)/$(GETTEXT_SOURCE)
- $(GETTEXT_CAT) $(DL_DIR)/$(GETTEXT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GETTEXT_DIR)/.unpacked
-
-$(GETTEXT_DIR)/.configured: $(GETTEXT_DIR)/.unpacked
- (cd $(GETTEXT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(GETTEXT_DIR)/.configured
-
-$(GETTEXT_DIR)/$(GETTEXT_BINARY): $(GETTEXT_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GETTEXT_DIR)
-
-$(TARGET_DIR)/$(GETTEXT_TARGET_BINARY): $(GETTEXT_DIR)/$(GETTEXT_BINARY)
- $(MAKE) DESTDIR=$(STAGING_DIR) CC=$(TARGET_CC) -C $(GETTEXT_DIR) install
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GETTEXT_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc \
- $(TARGET_DIR)/usr/doc
-
-gettext: uclibc $(TARGET_DIR)/$(GETTEXT_TARGET_BINARY)
-
-gettext-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GETTEXT_DIR) uninstall
- -$(MAKE) -C $(GETTEXT_DIR) clean
-
-gettext-dirclean:
- rm -rf $(GETTEXT_DIR)
-
+++ /dev/null
-#############################################################
-#
-# grep
-#
-#############################################################
-GNUGREP_SOURCE:=grep_2.5.1.ds1.orig.tar.gz
-GNUGREP_SITE:=http://ftp.debian.org/debian/pool/main/g/grep/
-GNUGREP_DIR:=$(BUILD_DIR)/grep-2.5.1
-GNUGREP_CAT:=zcat
-GNUGREP_BINARY:=src/grep
-GNUGREP_TARGET_BINARY:=bin/grep
-
-$(DL_DIR)/$(GNUGREP_SOURCE):
- $(WGET) -P $(DL_DIR) $(GNUGREP_SITE)/$(GNUGREP_SOURCE)
-
-grep-source: $(DL_DIR)/$(GNUGREP_SOURCE)
-
-$(GNUGREP_DIR)/.unpacked: $(DL_DIR)/$(GNUGREP_SOURCE)
- rm -rf $(GNUGREP_DIR).xxx
- $(GNUGREP_CAT) $(DL_DIR)/$(GNUGREP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(GNUGREP_DIR) $(GNUGREP_DIR).xxx
- $(GNUGREP_CAT) $(GNUGREP_DIR).xxx/grep_2.5.1.tar.gz | tar -C $(BUILD_DIR) -xvf -
- rm -rf $(GNUGREP_DIR).xxx
- touch $(GNUGREP_DIR)/.unpacked
-
-$(GNUGREP_DIR)/.configured: $(GNUGREP_DIR)/.unpacked
- (cd $(GNUGREP_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --disable-perl-regexp \
- --without-included-regex \
- );
- touch $(GNUGREP_DIR)/.configured
-
-$(GNUGREP_DIR)/$(GNUGREP_BINARY): $(GNUGREP_DIR)/.configured
- $(MAKE) -C $(GNUGREP_DIR)
-
-# This stuff is needed to work around GNU make deficiencies
-grep-target_binary: $(GNUGREP_DIR)/$(GNUGREP_BINARY)
- @if [ -L $(TARGET_DIR)/$(GNUGREP_TARGET_BINARY) ] ; then \
- rm -f $(TARGET_DIR)/$(GNUGREP_TARGET_BINARY); fi;
- @if [ ! -f $(GNUGREP_DIR)/$(GNUGREP_BINARY) -o $(TARGET_DIR)/$(GNUGREP_TARGET_BINARY) -ot \
- $(GNUGREP_DIR)/$(GNUGREP_BINARY) ] ; then \
- set -x; \
- rm -f $(TARGET_DIR)/bin/grep $(TARGET_DIR)/bin/egrep $(TARGET_DIR)/bin/fgrep; \
- cp -a $(GNUGREP_DIR)/src/grep $(GNUGREP_DIR)/src/egrep \
- $(GNUGREP_DIR)/src/fgrep $(TARGET_DIR)/bin/; fi
-
-grep: uclibc grep-target_binary
-
-grep-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUGREP_DIR) uninstall
- -$(MAKE) -C $(GNUGREP_DIR) clean
-
-grep-dirclean:
- rm -rf $(GNUGREP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# gzip
-#
-#############################################################
-GZIP_SOURCE:=gzip-1.3.5.tar.gz
-GZIP_SITE:=ftp://alpha.gnu.org/gnu/gzip
-GZIP_DIR:=$(BUILD_DIR)/gzip-1.3.5
-GZIP_CAT:=zcat
-GZIP_BINARY:=$(GZIP_DIR)/gzip
-GZIP_TARGET_BINARY:=$(TARGET_DIR)/bin/zmore
-
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),false)
-GZIP_LARGEFILE="--disable-largefile"
-endif
-
-$(DL_DIR)/$(GZIP_SOURCE):
- $(WGET) -P $(DL_DIR) $(GZIP_SITE)/$(GZIP_SOURCE)
-
-gzip-source: $(DL_DIR)/$(GZIP_SOURCE)
-
-$(GZIP_DIR)/.unpacked: $(DL_DIR)/$(GZIP_SOURCE)
- $(GZIP_CAT) $(DL_DIR)/$(GZIP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GZIP_DIR)/.unpacked
-
-$(GZIP_DIR)/.configured: $(GZIP_DIR)/.unpacked
- (cd $(GZIP_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/ \
- --bindir=/bin \
- --sbindir=/bin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share/misc \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(GZIP_LARGEFILE) \
- );
- touch $(GZIP_DIR)/.configured
-
-$(GZIP_BINARY): $(GZIP_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GZIP_DIR)
-
-$(GZIP_TARGET_BINARY): $(GZIP_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GZIP_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- (cd $(TARGET_DIR)/bin; \
- ln -sf gzip gunzip; \
- ln -sf gzip zcat; \
- ln -sf zdiff zcmp; \
- ln -sf zgrep zegrep; \
- ln -sf zgrep zfgrep;)
-
-gzip: uclibc $(GZIP_TARGET_BINARY)
-
-gzip-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GZIP_DIR) uninstall
- -$(MAKE) -C $(GZIP_DIR) clean
-
-gzip-dirclean:
- rm -rf $(GZIP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# hostap
-#
-#############################################################
-HOSTAP_SOURCE_URL=http://hostap.epitest.fi/cgi-bin/viewcvs.cgi/hostap/hostap.tar.gz?tarball=1
-HOSTAP_SOURCE=hostap.tar.gz
-HOSTAP_DIR=$(BUILD_DIR)/hostap-snapshot
-
-$(DL_DIR)/$(HOSTAP_SOURCE):
- $(WGET) -P $(DL_DIR) $(HOSTAP_SOURCE_URL) -O $(DL_DIR)/$(HOSTAP_SOURCE)
-
-hostap-source: $(DL_DIR)/$(HOSTAP_SOURCE)
-
-$(HOSTAP_DIR)/.unpacked: $(DL_DIR)/$(HOSTAP_SOURCE)
- zcat $(DL_DIR)/$(HOSTAP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv -f $(BUILD_DIR)/hostap $(HOSTAP_DIR)
- touch $(HOSTAP_DIR)/.unpacked
-
-$(HOSTAP_DIR)/.configured: $(HOSTAP_DIR)/.unpacked
- #$(SED) "s,/.*#define PRISM2_DOWNLOAD_SUPPORT.*/,#define PRISM2_DOWNLOAD_SUPPORT,g" \
- # $(HOSTAP_DIR)/driver/modules/hostap_config.h
- touch $(HOSTAP_DIR)/.configured
-
-$(HOSTAP_DIR)/utils/hostap_crypt_conf: $(HOSTAP_DIR)/.configured
- $(MAKE) -C $(HOSTAP_DIR)/utils CC=$(TARGET_CC) CFLAGS="-Os -Wall $(TARGET_CFLAGS) -I../driver/modules"
- $(MAKE) -C $(HOSTAP_DIR)/hostapd CC=$(TARGET_CC) CFLAGS="-Os -Wall $(TARGET_CFLAGS) -I../driver/modules -I../utils"
- touch -c $(HOSTAP_DIR)/driver/modules/hostap.o
-
-$(TARGET_DIR)//usr/bin/hostap_crypt_conf: $(HOSTAP_DIR)/utils/hostap_crypt_conf
- # Make the dir
- -rm -rf $(HOSTAP_TARGET_MODULE_DIR)
- -mkdir -p $(HOSTAP_TARGET_MODULE_DIR)
- # Copy the pcmcia-cs conf file
- -mkdir -p $(TARGET_DIR)/etc/pcmcia
- cp -af $(HOSTAP_DIR)/driver/etc/hostap_cs.conf $(TARGET_DIR)/etc/pcmcia/
- # Copy The Utils
- cp -af $(HOSTAP_DIR)/utils/hostap_crypt_conf $(TARGET_DIR)/usr/bin/
- cp -af $(HOSTAP_DIR)/utils/hostap_diag $(TARGET_DIR)/usr/bin/
- cp -af $(HOSTAP_DIR)/utils/prism2_param $(TARGET_DIR)/usr/bin/
- cp -af $(HOSTAP_DIR)/utils/prism2_srec $(TARGET_DIR)/usr/bin/
- # Copy hostapd
- cp -af $(HOSTAP_DIR)/hostapd/hostapd $(TARGET_DIR)/usr/sbin/
-
-hostap: pcmcia $(TARGET_DIR)//usr/bin/hostap_crypt_conf
-
-hostap-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(HOSTAP_DIR) uninstall
- -$(MAKE) -C $(HOSTAP_DIR) clean
-
-hostap-dirclean:
- rm -rf $(HOSTAP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# hotplug support
-#
-#############################################################
-HOTPLUG_SOURCE=diethotplug-0.4.tar.gz
-HOTPLUG_SITE=http://aleron.dl.sourceforge.net/sourceforge/linux-hotplug
-HOTPLUG_DIR=$(BUILD_DIR)/diethotplug-0.4
-HOTPLUG_PATCH=$(SOURCE_DIR)/hotplug.patch
-
-$(DL_DIR)/$(HOTPLUG_SOURCE):
- $(WGET) -P $(DL_DIR) $(HOTPLUG_SITE)/$(HOTPLUG_SOURCE)
-
-$(HOTPLUG_DIR): $(DL_DIR)/$(HOTPLUG_SOURCE) $(HOTPLUG_PATCH)
- zcat $(DL_DIR)/$(HOTPLUG_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(HOTPLUG_PATCH) | patch -p1 -d $(HOTPLUG_DIR)
-
-$(HOTPLUG_DIR)/hotplug: $(HOTPLUG_DIR)
- $(MAKE) CROSS=$(TARGET_CROSS) DEBUG=false KLIBC=false \
- KERNEL_INCLUDE_DIR=$(STAGING_DIR)/include \
- TARGET_DIR=$(TARGET_DIR) -C $(HOTPLUG_DIR);
- $(STRIP) $(HOTPLUG_DIR)/hotplug;
- touch -c $(HOTPLUG_DIR)/hotplug
-
-$(TARGET_DIR)/sbin/hotplug: $(HOTPLUG_DIR)/hotplug
- cp $(HOTPLUG_DIR)/hotplug $(TARGET_DIR)/sbin/hotplug;
- touch -c $(TARGET_DIR)/sbin/hotplug
-
-hotplug: uclibc $(TARGET_DIR)/sbin/hotplug
-
-hotplug-source: $(DL_DIR)/$(HOTPLUG_SOURCE)
-
-hotplug-clean:
- rm -f $(TARGET_DIR)/sbin/hotplug
- -$(MAKE) -C $(HOTPLUG_DIR) clean
-
-hotplug-dirclean:
- rm -rf $(HOTPLUG_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ipkg-utils for use on the host system
-#
-#############################################################
-
-IPKG_UTILS_VERSION:=1.7
-IPKG_UTILS_SITE:=http://handhelds.org/packages/ipkg-utils/
-IPKG_UTILS_SOURCE:=ipkg-utils-$(IPKG_UTILS_VERSION).tar.gz
-IPKG_UTILS_DIR:=$(TOOL_BUILD_DIR)/ipkg-utils-$(IPKG_UTILS_VERSION)
-
-IPKG_UTILS_PATCHES += ipkg-utils-1.7-ipkg_buildpackage.patch
-IPKG_UTILS_PATCHES += ipkg-utils-1.7-ipkg_build_clean.patch
-
-$(DL_DIR)/$(IPKG_UTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(IPKG_UTILS_SITE)/$(IPKG_UTILS_SOURCE)
-
-$(IPKG_UTILS_DIR)/.unpacked: $(DL_DIR)/$(IPKG_UTILS_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- mkdir -p $(DL_DIR)
- zcat $(DL_DIR)/$(IPKG_UTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- cd $(SOURCE_DIR); cat $(IPKG_UTILS_PATCHES) | patch -p1 -d $(IPKG_UTILS_DIR)
- touch $(IPKG_UTILS_DIR)/.unpacked
-
-$(STAGING_DIR)/bin/ipkg-build: $(IPKG_UTILS_DIR)/.unpacked
- mkdir -p $(STAGING_DIR)/bin
- install -m0755 $(IPKG_UTILS_DIR)/ipkg-build* $(STAGING_DIR)/bin
- install -m0755 $(IPKG_UTILS_DIR)/ipkg-make-index $(STAGING_DIR)/bin
- install -m0755 $(IPKG_UTILS_DIR)/ipkg.py $(STAGING_DIR)/bin
-
-ipkg-utils: $(STAGING_DIR)/bin/ipkg-build
-
-ipkg-utils-clean:
- rm -f $(STAGING_DIR)/bin/ipkg*
-
-ipkg-utils-dirclean:
- rm -rf $(IPKG_UTILS_DIR)
-
-
-IPKG_BUILDPACKAGE := PATH=$(TARGET_PATH) ipkg-buildpackage -c -o root -g root
-IPKG_BUILD := PATH=$(TARGET_PATH) ipkg-build -c -o root -g root
-IPKG_MAKE_INDEX := PATH=$(TARGET_PATH) ipkg-make-index
-
+++ /dev/null
-#############################################################
-#
-# iproute2
-#
-#############################################################
-
-IPROUTE2_DIR=$(BUILD_DIR)/iproute2
-IP_IPK_DIR=$(BUILD_DIR)/ip-2.0-ipk
-TC_IPK_DIR=$(BUILD_DIR)/tc-2.0-ipk
-
-#IPROUTE2_SOURCE_URL=ftp://ftp.inr.ac.ru/ip-routing/
-#IPROUTE2_SOURCE=iproute2-2.4.7-now-ss020116-try.tar.gz
-
-#Use the debian source for now, as the .ru site has availability problems
-IPROUTE2_SOURCE_URL=http://ftp.debian.org/debian/pool/main/i/iproute/
-IPROUTE2_SOURCE=iproute_20010824.orig.tar.gz
-IPROUTE2_PATCH:=iproute_20010824-8.diff.gz
-IPROUTE2_PATCH_2:=iproute2-*.patch
-
-
-$(DL_DIR)/$(IPROUTE2_SOURCE):
- $(WGET) -P $(DL_DIR) $(IPROUTE2_SOURCE_URL)$(IPROUTE2_SOURCE)
-
-$(DL_DIR)/$(IPROUTE2_PATCH):
- $(WGET) -P $(DL_DIR) $(IPROUTE2_SOURCE_URL)/$(IPROUTE2_PATCH)
-
-
-iproute2-source: $(DL_DIR)/$(IPROUTE2_SOURCE) #$(DL_DIR)/$(IPROUTE2_PATCH)
-
-$(IPROUTE2_DIR)/.unpacked: $(DL_DIR)/$(IPROUTE2_SOURCE) #$(DL_DIR)/$(IPROUTE2_PATCH)
- rm -rf $(IPROUTE2_DIR).orig $(IPROUTE2_DIR)
- zcat $(DL_DIR)/$(IPROUTE2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #zcat $(DL_DIR)/$(IPROUTE2_PATCH) | patch -p1 -d $(IPROUTE2_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(IPROUTE2_DIR) $(SOURCE_DIR) $(IPROUTE2_PATCH_2)
- # fun sed hacks.
- $(SED) "s:-O2:${TARGET_CFLAGS}:g" $(IPROUTE2_DIR)/Makefile
-ifeq ($(ARCH),i386)
- @# needed on atleast i386.. however breaks on mipsel
- $(SED) 's:-I\.\./include-glibc::g' $(IPROUTE2_DIR)/Makefile
-endif
- touch $(IPROUTE2_DIR)/.unpacked
-
-$(IPROUTE2_DIR)/.configured: $(IPROUTE2_DIR)/.unpacked
- $(SED) "s,-I/usr/include/db3,," $(IPROUTE2_DIR)/Makefile
- $(SED) "s,^KERNEL_INCLUDE.*,KERNEL_INCLUDE=$(LINUX_DIR)/include," \
- $(IPROUTE2_DIR)/Makefile
- $(SED) "s,^LIBC_INCLUDE.*,LIBC_INCLUDE=$(STAGING_DIR)/include," \
- $(IPROUTE2_DIR)/Makefile
- # For now disable compiling of the misc directory because it seems to fail
- rm -rf $(IPROUTE2_DIR)/misc
- $(SED) "s, misc,," $(IPROUTE2_DIR)/Makefile
- touch $(IPROUTE2_DIR)/.configured
-
-$(IPROUTE2_DIR)/tc/tc: $(IPROUTE2_DIR)/.configured
- $(MAKE) -C $(IPROUTE2_DIR) $(TARGET_CONFIGURE_OPTS) KERNEL_INCLUDE=$(LINUX_DIR)/include
-
-$(TARGET_DIR)/usr/sbin/tc: $(IPROUTE2_DIR)/tc/tc
- @# Make sure our $(TARGET_DIR)/usr/sbin/ exists.
- -mkdir -p $(TARGET_DIR)/usr/sbin/
- @# Copy The tc binary
- cp -af $(IPROUTE2_DIR)/tc/tc $(TARGET_DIR)/usr/sbin/ && \
- $(STRIP) $(TARGET_DIR)/usr/sbin/tc
-
-iproute2: $(TARGET_DIR)/usr/sbin/tc
-
-iproute2-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(IPROUTE2_DIR) uninstall
- -$(MAKE) -C $(IPROUTE2_DIR) clean
-
-iproute2-dirclean:
- rm -rf $(IPROUTE2_DIR) $(IP_IPK_DIR) $(TC_IPK_DIR)
-
-
-iproute2-ipk: $(IPROUTE2_DIR)/tc/tc
- mkdir -p $(IP_IPK_DIR)
- mkdir -p $(TC_IPK_DIR)
- cp -a $(OPENWRT_IPK_DIR)/iproute/ip/CONTROL $(IP_IPK_DIR)/CONTROL
- cp -a $(OPENWRT_IPK_DIR)/iproute/tc/CONTROL $(TC_IPK_DIR)/CONTROL
- mkdir -p $(IP_IPK_DIR)/usr/sbin
- mkdir -p $(TC_IPK_DIR)/usr/sbin
- install -m 755 $(IPROUTE2_DIR)/ip/ip $(IP_IPK_DIR)/usr/sbin/
- install -m 755 $(IPROUTE2_DIR)/tc/tc $(TC_IPK_DIR)/usr/sbin/
- $(STRIP) $(IP_IPK_DIR)/usr/sbin/ip
- $(STRIP) $(TC_IPK_DIR)/usr/sbin/tc
- cd $(BUILD_DIR); $(IPKG_BUILD) $(IP_IPK_DIR)
- cd $(BUILD_DIR); $(IPKG_BUILD) $(TC_IPK_DIR)
+++ /dev/null
-#############################################################
-#
-# iptables
-#
-#############################################################
-IPTABLES_SOURCE_URL=http://www.netfilter.org/files
-IPTABLES_SOURCE=iptables-1.2.11.tar.bz2
-IPTABLES_BUILD_DIR=$(BUILD_DIR)/iptables-1.2.11
-IP6TABLES_IPK=$(BUILD_DIR)/ip6tables_1.2.11-1_mipsel.ipk
-IP6TABLES_IPK_DIR:=$(BUILD_DIR)/ip6tables-1.2.11-ipk
-
-$(DL_DIR)/$(IPTABLES_SOURCE):
- $(WGET) -P $(DL_DIR) $(IPTABLES_SOURCE_URL)/$(IPTABLES_SOURCE)
-
-$(IPTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(IPTABLES_SOURCE)
- bzcat $(DL_DIR)/$(IPTABLES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(IPTABLES_BUILD_DIR)/.unpacked
-
-$(IPTABLES_BUILD_DIR)/.configured: $(IPTABLES_BUILD_DIR)/.unpacked
- # Allow patches. Needed for openwrt for instance.
- $(SOURCE_DIR)/patch-kernel.sh $(IPTABLES_BUILD_DIR) $(SOURCE_DIR) iptables-*.patch
- #
- $(SED) "s;\[ -f /usr/include/netinet/ip6.h \];grep -q '__UCLIBC_HAS_IPV6__ 1' \
- $(BUILD_DIR)/uClibc-0.9.27/include/bits/uClibc_config.h;" $(IPTABLES_BUILD_DIR)/Makefile
- touch $(IPTABLES_BUILD_DIR)/.configured
-
-$(IPTABLES_BUILD_DIR)/iptables: $(IPTABLES_BUILD_DIR)/.configured
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(IPTABLES_BUILD_DIR) \
- KERNEL_DIR=$(LINUX_DIR) PREFIX=/usr \
- CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)"
-
-$(TARGET_DIR)/sbin/iptables: $(IPTABLES_BUILD_DIR)/iptables
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(IPTABLES_BUILD_DIR) \
- KERNEL_DIR=$(LINUX_DIR) PREFIX=/usr \
- CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)" \
- DESTDIR=$(TARGET_DIR) install
- $(STRIP) $(TARGET_DIR)/usr/sbin/iptables*
- $(STRIP) $(TARGET_DIR)/usr/sbin/ip6tables*
- $(STRIP) $(TARGET_DIR)/usr/lib/iptables/*.so
- rm -rf $(TARGET_DIR)/usr/man
-
-iptables: $(TARGET_DIR)/sbin/iptables
-
-$(IP6TABLES_IPK):
- mkdir -p $(IP6TABLES_IPK_DIR)/CONTROL
- mkdir -p $(IP6TABLES_IPK_DIR)/usr/lib/iptables
- mkdir -p $(IP6TABLES_IPK_DIR)/usr/sbin
- install -m 644 $(OPENWRT_IPK_DIR)/ip6tables/ip6tables.control $(IP6TABLES_IPK_DIR)/CONTROL/control
- install -m 755 $(IPTABLES_BUILD_DIR)/ip6tables $(IP6TABLES_IPK_DIR)/usr/sbin
- install -m 755 $(IPTABLES_BUILD_DIR)/extensions/libip6t_*.so $(IP6TABLES_IPK_DIR)/usr/lib/iptables/
- $(STRIP) $(IP6TABLES_IPK_DIR)/usr/sbin/ip6tables*
- $(STRIP) $(IP6TABLES_IPK_DIR)/usr/lib/iptables/*.so
- cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(IP6TABLES_IPK_DIR)
-
-ip6tables-ipk: iptables $(IP6TABLES_IPK)
-
-iptables-source: $(DL_DIR)/$(IPTABLES_SOURCE)
-
-iptables-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(IPTABLES_BUILD_DIR) uninstall
- -$(MAKE) -C $(IPTABLES_BUILD_DIR) clean
-
-iptables-dirclean:
- rm -rf $(IPTABLES_BUILD_DIR)
-
+++ /dev/null
-#############################################################
-#
-# jffsbbc
-#
-#############################################################
-
-
-JFFSBBC_SOURCE:=bbc-0.54.3.tgz
-JFFSBBC_DIR:=$(BUILD_DIR)/bbc-0.54.3
-JFFSBBC_SITE:=http://www.inf.u-szeged.hu/jffs2
-JFFSBBC_CAT:=zcat
-
-LINUX_DIR:=$(BUILD_DIR)/WRT54GS/release/src/linux/linux
-
-$(DL_DIR)/$(JFFSBBC_SOURCE):
- $(WGET) -P $(DL_DIR) $(JFFSBBC_SITE)/$(JFFSBBC_SOURCE)
-
-jffsbbc-source: $(DL_DIR)/$(JFFSBBC_SOURCE)
-
-$(JFFSBBC_DIR)/.unpacked: $(DL_DIR)/$(JFFSBBC_SOURCE)
- $(JFFSBBC_CAT) $(DL_DIR)/$(JFFSBBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(JFFSBBC_DIR)/.unpacked
-
-$(LINUX_DIR)/.bbc-patched: $(LINUX_DIR)/.patched $(JFFSBBC_DIR)/.unpacked
- -(cd $(JFFSBBC_DIR)/src; ./install.jffs2 linux-2.4.25.hpatch $(LINUX_DIR))
- touch $(LINUX_DIR)/.bbc-patched
-
-jffsbbc: $(LINUX_DIR)/.bbc-patched
-
-jffsbbc-clean:
-
-jffsbbc-dirclean:
- rm -rf $(JFFSBBC_DIR)
+++ /dev/null
-#############################################################
-#
-# mtd provides us with mkfs.jffs2, to target JFFS2 filesystems
-#
-#############################################################
-
-MTD_DIR:=$(BUILD_DIR)/mtd-20011217
-MTD_SOURCE=mtd_20011217.orig.tar.gz
-MTD_SITE=http://ftp.debian.org/debian/pool/main/m/mtd
-MKFS_JFFS2=${shell which mkfs.jffs2 || echo $(MTD_DIR)/util/mkfs.jffs2}
-
-$(DL_DIR)/$(MTD_SOURCE):
- $(WGET) -P $(DL_DIR) $(MTD_SITE)/$(MTD_SOURCE)
-
-$(MTD_DIR)/.unpacked: $(DL_DIR)/$(MTD_SOURCE)
- zcat $(DL_DIR)/$(MTD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MTD_DIR)/.unpacked
-
-$(MTD_DIR)/util/mkfs.jffs2: $(MTD_DIR)/.unpacked
- CFLAGS=-I$(LINUX_DIR)/include $(MAKE) LINUXDIR=$(LINUX_DIR) -C $(MTD_DIR)/util
-
-mtd: $(MKFS_JFFS2)
-
-
-#############################################################
-#
-# Build the jffs2 root filesystem image
-#
-#############################################################
-
-jffs2root: mtd
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true;
- @rm -rf $(TARGET_DIR)/usr/man
- @rm -rf $(TARGET_DIR)/usr/info
- $(MKFS_JFFS2) --pad --little-endian --squash -e 0x20000 \
- -D $(SOURCE_DIR)/device_table.txt -d $(TARGET_DIR) \
- -o $(IMAGE)
-
-jffs2root-source: $(DL_DIR)/$(MTD_SOURCE)
-
-jffs2root-clean:
- -$(MAKE) -C $(MTD_DIR) clean
-
-jffs2root-dirclean:
- rm -rf $(MTD_DIR)
-
-
-
+++ /dev/null
-#############################################################
-#
-# jpeg (libraries needed by some apps)
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-JPEG_DIR=$(BUILD_DIR)/jpeg-6b
-JPEG_SITE:=ftp://ftp.uu.net/graphics/jpeg/
-JPEG_SOURCE=jpegsrc.v6b.tar.gz
-JPEG_CAT:=zcat
-
-$(DL_DIR)/$(JPEG_SOURCE):
- $(WGET) -P $(DL_DIR) $(JPEG_SITE)/$(JPEG_SOURCE)
-
-jpeg-source: $(DL_DIR)/$(JPEG_SOURCE)
-
-$(JPEG_DIR)/.unpacked: $(DL_DIR)/$(JPEG_SOURCE)
- $(JPEG_CAT) $(DL_DIR)/$(JPEG_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # The config.guess distributed with the package is not able
- # to handle cross compilation. Use the one from binutils.
- cp $(BINUTILS_DIR)/config.guess $(JPEG_DIR)/
- touch $(JPEG_DIR)/.unpacked
-
-$(JPEG_DIR)/.configured: $(JPEG_DIR)/.unpacked
- (cd $(JPEG_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --enable-shared \
- );
- touch $(JPEG_DIR)/.configured
-
-$(STAGING_DIR)/lib/libjpeg.so.62.0.0: $(JPEG_DIR)/.configured
- $(MAKE) -C $(JPEG_DIR) all
- # Note: This does not install the utilities.
- $(MAKE) -C $(JPEG_DIR) prefix=$(STAGING_DIR) exec_prefix=$(STAGING_DIR) install-headers install-lib
-
-$(TARGET_DIR)/lib/libjpeg.so.62.0.0: $(STAGING_DIR)/lib/libjpeg.so.62.0.0
- cp -dpf $(STAGING_DIR)/lib/libjpeg.so* $(TARGET_DIR)/usr/lib/
- -$(STRIP) $(TARGET_DIR)/usr/lib/libjpeg.so.62.0.0
-
-jpeg: uclibc $(TARGET_DIR)/lib/libjpeg.so.62.0.0
-
-jpeg-clean:
- -$(MAKE) -C $(JPEG_DIR) clean
+++ /dev/null
-#############################################################
-#
-# Setup the kernel headers. I include a generic package of
-# kernel headers here, so you shouldn't need to include your
-# own. Be aware these kernel headers _will_ get blown away
-# by a 'make clean' so don't put anything sacred in here...
-#
-#############################################################
-ifneq ($(filter $(TARGETS),kernel-headers),)
-
-VERSION=2
-PATCHLEVEL=4
-SUBLEVEL=25
-LINUX_SITE:=http://www.uclibc.org/downloads/toolchain
-LINUX_SOURCE:=kernel-headers-2.4.25.tar.bz2
-LINUX_UNPACK_DIR:=$(TOOL_BUILD_DIR)/linux
-
-
-# Uncomment this for 2.6.x kernel header files
-#VERSION=2
-#PATCHLEVEL=6
-#SUBLEVEL=5
-#LINUX_SITE:=http://ep09.pld-linux.org/~mmazur/linux-libc-headers/
-#LINUX_SOURCE:=linux-libc-headers-2.6.5.0.tar.bz2
-#LINUX_UNPACK_DIR:=$(TOOL_BUILD_DIR)/linux-libc-headers-2.6.5.0
-
-
-
-LINUX_DIR:=$(TOOL_BUILD_DIR)/linux
-
-$(DL_DIR)/$(LINUX_SOURCE):
- $(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
-ifneq ($(LINUX_UNPACK_DIR),$(LINUX_DIR))
- mv $(LINUX_UNPACK_DIR) $(LINUX_DIR)
-endif
- touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.unpacked
- rm -f $(LINUX_DIR)/include/asm
- @if [ ! -f $(LINUX_DIR)/Makefile ] ; then \
- echo -e "VERSION = $(VERSION)\nPATCHLEVEL = $(PATCHLEVEL)\n" > \
- $(LINUX_DIR)/Makefile; \
- echo -e "SUBLEVEL = $(SUBLEVEL)\nEXTRAVERSION =\n" > \
- $(LINUX_DIR)/Makefile; \
- echo -e "KERNELRELEASE=\$$(VERSION).\$$(PATCHLEVEL).\$$(SUBLEVEL)\$$(EXTRAVERSION)" >> \
- $(LINUX_DIR)/Makefile; \
- fi;
- @if [ "$(ARCH)" = "powerpc" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-ppc$(NOMMU) asm;) \
- elif [ "$(ARCH)" = "mips" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-mips$(NOMMU) asm;) \
- elif [ "$(ARCH)" = "mipsel" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-mips$(NOMMU) asm;) \
- elif [ "$(ARCH)" = "arm" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-arm$(NOMMU) asm; \
- cd asm; \
- if [ ! -L proc ] ; then \
- ln -fs proc-armv proc; \
- ln -fs arch-ebsa285 arch; fi); \
- elif [ "$(ARCH)" = "cris" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-cris asm;) \
- else \
- (cd $(LINUX_DIR)/include; ln -fs asm-$(ARCH)$(NOMMU) asm;) \
- fi
- touch $(LINUX_DIR)/include/linux/autoconf.h;
- touch $(LINUX_DIR)/.configured
-
-$(LINUX_KERNEL): $(LINUX_DIR)/.configured
-
-kernel-headers: $(LINUX_DIR)/.configured
-
-kernel-headers-source: $(DL_DIR)/$(LINUX_SOURCE)
-
-kernel-headers-clean: clean
- rm -f $(LINUX_KERNEL)
- rm -rf $(LINUX_DIR)
-
-kernel-headers-dirclean:
- rm -rf $(LINUX_DIR)
-
-endif
+++ /dev/null
-kmod-ipt6-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ipt6/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ipt6/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ipt6 ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ipt6_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-ipv6-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ipv6/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ipv6/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ipv6 ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ipv6_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-nfs-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-nfs/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-nfs/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-nfs ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-nfs_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-ppp-async-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ppp-async/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ppp-async/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ppp-async ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ppp-async_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-ppp-mppe-mppc-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-sched-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-sched/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-sched/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-sched ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-sched_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-tun-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-tun/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-tun/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-tun ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-tun_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-#############################################################
-#
-# less
-#
-#############################################################
-LESS_SOURCE=less-381.tar.gz
-LESS_SITE=http://www.greenwoodsoftware.com/less
-LESS_DIR=$(BUILD_DIR)/less-381
-LESS_BINARY=less
-LESS_TARGET_BINARY=usr/bin/less
-
-$(DL_DIR)/$(LESS_SOURCE):
- $(WGET) -P $(DL_DIR) $(LESS_SITE)/$(LESS_SOURCE)
-
-$(LESS_DIR)/.source: $(DL_DIR)/$(LESS_SOURCE)
- zcat $(DL_DIR)/$(LESS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LESS_DIR)/.source
-
-$(LESS_DIR)/.configured: $(LESS_DIR)/.source
- (cd $(LESS_DIR); \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- );
- touch $(LESS_DIR)/.configured;
-
-$(LESS_DIR)/$(LESS_BINARY): $(LESS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LESS_DIR)
-
-$(TARGET_DIR)/$(LESS_TARGET_BINARY): $(LESS_DIR)/$(LESS_BINARY)
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LESS_DIR) install
- rm -Rf $(TARGET_DIR)/usr/man
-
-less: uclibc $(TARGET_DIR)/$(LESS_TARGET_BINARY)
-
-less-source: $(DL_DIR)/$(LESS_SOURCE)
-
-less-clean:
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LESS_DIR) uninstall
- -$(MAKE) -C $(LESS_DIR) clean
-
-less-dirclean:
- rm -rf $(LESS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# libfloat
-#
-#############################################################
-LIBFLOAT_SOURCE:=libfloat_990616.orig.tar.gz
-LIBFLOAT_PATCH:=libfloat_990616-3.diff.gz
-LIBFLOAT_SITE:=http://ftp.debian.org/debian/pool/main/libf/libfloat
-LIBFLOAT_CAT:=zcat
-LIBFLOAT_DIR:=$(BUILD_DIR)/libfloat
-
-LIBFLOAT_TARGET=
-ifeq ($(strip $(SOFT_FLOAT)),true)
-ifeq ("$(strip $(ARCH))","arm")
-LIBFLOAT_TARGET+=$(STAGING_DIR)/lib/libfloat.so
-endif
-endif
-
-$(DL_DIR)/$(LIBFLOAT_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBFLOAT_SITE)/$(LIBFLOAT_SOURCE)
-
-$(DL_DIR)/$(LIBFLOAT_PATCH):
- $(WGET) -P $(DL_DIR) $(LIBFLOAT_SITE)/$(LIBFLOAT_PATCH)
-
-libfloat-source: $(DL_DIR)/$(LIBFLOAT_SOURCE) $(DL_DIR)/$(LIBFLOAT_PATCH)
-
-$(LIBFLOAT_DIR)/.unpacked: $(DL_DIR)/$(LIBFLOAT_SOURCE) $(DL_DIR)/$(LIBFLOAT_PATCH)
- $(LIBFLOAT_CAT) $(DL_DIR)/$(LIBFLOAT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # Remove the binary files distributed with the the package.
- make -C $(LIBFLOAT_DIR) clean
- $(SOURCE_DIR)/patch-kernel.sh $(LIBFLOAT_DIR) $(DL_DIR) $(LIBFLOAT_PATCH)
- $(SOURCE_DIR)/patch-kernel.sh $(LIBFLOAT_DIR) $(SOURCE_DIR) libfloat.patch
- touch $(LIBFLOAT_DIR)/.unpacked
-
-$(LIBFLOAT_DIR)/libfloat.so.1: $(LIBFLOAT_DIR)/.unpacked $(TARGET_CC)
- $(MAKE) CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld -C $(LIBFLOAT_DIR)
-
-$(STAGING_DIR)/lib/libfloat.so: $(LIBFLOAT_DIR)/libfloat.so.1
- cp -a $(LIBFLOAT_DIR)/libfloat.a $(STAGING_DIR)/lib/libfloat.a
- cp -a $(LIBFLOAT_DIR)/libfloat.so.1 $(STAGING_DIR)/lib/libfloat.so.1
- (cd $(STAGING_DIR)/lib ; ln -sf libfloat.so.1 libfloat.so)
- cp -a $(LIBFLOAT_DIR)/libfloat.a $(TARGET_DIR)/usr/lib/libfloat.a
- cp -a $(LIBFLOAT_DIR)/libfloat.so.1 $(TARGET_DIR)/lib/libfloat.so.1
- $(STRIP) $(TARGET_DIR)/lib/libfloat.so.1 > /dev/null 2>&1
- (cd $(TARGET_DIR)/lib ; ln -sf libfloat.so.1 libfloat.so)
- (cd $(TARGET_DIR)/usr/lib ; ln -sf /lib/libfloat.so libfloat.so)
-
-libfloat: $(STAGING_DIR)/lib/libfloat.so
-
-libfloat-clean:
- -$(MAKE) -C $(LIBFLOAT_DIR) clean
-
-libfloat-dirclean:
- rm -rf $(LIBFLOAT_DIR)
-
+++ /dev/null
-#############################################################
-#
-# libglib1.2
-#
-#############################################################
-LIBGLIB12_SOURCE:=glib-1.2.10.tar.gz
-LIBGLIB12_SITE:=ftp://ftp.gtk.org/pub/gtk/v1.2
-LIBGLIB12_CAT:=zcat
-LIBGLIB12_DIR:=$(BUILD_DIR)/glib-1.2.10
-LIBGLIB12_BINARY:=libglib.a
-LIBGLIB12_PATCH:=$(SOURCE_DIR)/libglib_configure_1.2.10.bz2
-
-
-$(DL_DIR)/$(LIBGLIB12_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBGLIB12_SITE)/$(LIBGLIB12_SOURCE)
-
-libglib12-source: $(DL_DIR)/$(LIBGLIB12_SOURCE)
-
-$(LIBGLIB12_DIR)/.unpacked: $(DL_DIR)/$(LIBGLIB12_SOURCE)
- $(LIBGLIB12_CAT) $(DL_DIR)/$(LIBGLIB12_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- bzcat $(LIBGLIB12_PATCH) | patch -p1 -d $(LIBGLIB12_DIR)
- touch $(LIBGLIB12_DIR)/.unpacked
-
-$(LIBGLIB12_DIR)/.configured: $(LIBGLIB12_DIR)/.unpacked
- (cd $(LIBGLIB12_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --enable-shared \
- );
- touch $(LIBGLIB12_DIR)/.configured
-
-$(LIBGLIB12_DIR)/.libs/$(LIBGLIB12_BINARY): $(LIBGLIB12_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LIBGLIB12_DIR)
-
-$(STAGING_DIR)/lib/$(LIBGLIB12_BINARY): $(LIBGLIB12_DIR)/.libs/$(LIBGLIB12_BINARY)
- $(MAKE) prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/libexec \
- datadir=$(STAGING_DIR)/share \
- sysconfdir=$(STAGING_DIR)/etc \
- sharedstatedir=$(STAGING_DIR)/com \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- includedir=$(STAGING_DIR)/include \
- oldincludedir=$(STAGING_DIR)/include \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- -C $(LIBGLIB12_DIR) install;
-
-$(TARGET_DIR)/lib/$(LIBGLIB12_BINARY): $(STAGING_DIR)/lib/$(LIBGLIB12_BINARY)
- cp -a $(STAGING_DIR)/lib/$(LIBGLIB12_BINARY) $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libglib.so $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libglib-1.2.so.0 $(TARGET_DIR)/lib/
- $(STRIP) $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
-
-libglib12: uclibc $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
-
-libglib12-clean:
- rm -f $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
- -$(MAKE) -C $(LIBGLIB12_DIR) clean
-
-libglib12-dirclean:
- rm -rf $(LIBGLIB12_DIR)
-
+++ /dev/null
-#############################################################
-#
-# libmad
-#
-#############################################################
-
-LIBMAD_VERSION=0.15.0b
-
-# Don't alter below this line unless you (think) you know
-# what you are doing! Danger, Danger!
-
-LIBMAD_SOURCE=libmad-$(LIBMAD_VERSION).tar.gz
-LIBMAD_SITE=http://easynews.dl.sourceforge.net/sourceforge/mad/
-LIBMAD_DIR=$(BUILD_DIR)/${shell basename $(LIBMAD_SOURCE) .tar.gz}
-LIBMAD_WORKDIR=$(BUILD_DIR)/libmad-$(LIBMAD_VERSION)
-
-$(DL_DIR)/$(LIBMAD_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBMAD_SITE)/$(LIBMAD_SOURCE)
-
-$(LIBMAD_DIR)/.unpacked: $(DL_DIR)/$(LIBMAD_SOURCE)
- gzip -d -c $(DL_DIR)/$(LIBMAD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LIBMAD_DIR)/.unpacked
-
-$(LIBMAD_DIR)/.configured: $(LIBMAD_DIR)/.unpacked
- (cd $(LIBMAD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- $(DISABLE_NLS) \
- );
- touch $(LIBMAD_DIR)/.configured
-
-$(LIBMAD_WORKDIR)/libmad: $(LIBMAD_DIR)/.configured
- rm -f $@
- $(MAKE) CC=$(TARGET_CC) -C $(LIBMAD_WORKDIR)
-
-$(LIBMAD_WORKDIR)/.installed: $(LIBMAD_WORKDIR)/libmad
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LIBMAD_WORKDIR) install
- touch $(LIBMAD_WORKDIR)/.installed
-
-libmad: uclibc $(LIBMAD_WORKDIR)/.installed
-
-libmad-source: $(DL_DIR)/$(LIBMAD_SOURCE)
-
-libmad-clean:
- @if [ -d $(LIBMAD_WORKDIR)/Makefile ] ; then \
- $(MAKE) -C $(LIBMAD_WORKDIR) clean ; \
- fi;
-
-libmad-dirclean:
- rm -rf $(LIBMAD_DIR) $(LIBMAD_WORKDIR)
-
+++ /dev/null
-## libpcap
-
-LIBPCAP_VERSION:=0.8.3
-LIBPCAP_RELEASE:=1
-
-LIBPCAP_SOURCE:=libpcap-$(LIBPCAP_VERSION).tar.gz
-LIBPCAP_SITE:=http://www.tcpdump.org/release/
-LIBPCAP_DIR:=$(BUILD_DIR)/libpcap-$(LIBPCAP_VERSION)
-LIBPCAP_CAT:=zcat
-
-LIBPCAP_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/libpcap
-
-LIBPCAP_BUILD_DIR := $(BUILD_DIR)/libpcap_$(LIBPCAP_VERSION)-$(LIBPCAP_RELEASE)
-LIBPCAP_IPK_DIR := $(OPENWRT_IPK_DIR)/libpcap
-LIBPCAP_IPK := $(LIBPCAP_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(LIBPCAP_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBPCAP_SITE)/$(LIBPCAP_SOURCE)
-
-
-$(LIBPCAP_DIR)/.stamp-unpacked: $(DL_DIR)/$(LIBPCAP_SOURCE)
- $(LIBPCAP_CAT) $(DL_DIR)/$(LIBPCAP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(LIBPCAP_DIR)/.stamp-unpacked
-
-
-$(LIBPCAP_DIR)/.stamp-patched: $(LIBPCAP_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(LIBPCAP_DIR) $(LIBPCAP_PATCH_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(LIBPCAP_DIR) $(LIBPCAP_DIR)/debian/patches *patch
-
- touch $(LIBPCAP_DIR)/.stamp-patched
-
-
-$(LIBPCAP_DIR)/.stamp-configured: $(LIBPCAP_DIR)/.stamp-patched
- cd $(LIBPCAP_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_linux_vers="2" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- --includedir=/usr/include \
- --libdir=/usr/lib \
- $(DISABLE_NLS) \
- --enable-shared \
- --disable-static \
- --with-pcap=linux \
-
- touch $(LIBPCAP_DIR)/.stamp-configured
-
-
-$(LIBPCAP_DIR)/.stamp-built: $(LIBPCAP_DIR)/.stamp-configured
- cd $(LIBPCAP_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- CCOPT="$(TARGET_OPTIMIZATION)" \
-
- touch $(LIBPCAP_DIR)/.stamp-built
-
-
-$(LIBPCAP_DIR)/.stamp-installed: $(LIBPCAP_DIR)/.stamp-built
- mkdir -p $(LIBPCAP_BUILD_DIR)
- cd $(LIBPCAP_DIR) ; \
- $(MAKE) \
- DESTDIR="$(LIBPCAP_BUILD_DIR)" \
- install \
-
- install -m0644 $(LIBPCAP_BUILD_DIR)/usr/include/pcap*.h $(STAGING_DIR)/include/
- install -m0644 $(LIBPCAP_BUILD_DIR)/usr/lib/libpcap.a $(STAGING_DIR)/lib/
- install -m0755 $(LIBPCAP_BUILD_DIR)/usr/lib/libpcap.so* $(STAGING_DIR)/lib/
-
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/share
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/include
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/lib/*.a
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/lib/*.so
-
- $(STRIP) $(LIBPCAP_BUILD_DIR)/usr/lib/libpcap.so.*
-
- touch $(LIBPCAP_DIR)/.stamp-installed
-
-
-$(LIBPCAP_IPK): $(LIBPCAP_DIR)/.stamp-installed
- cp -a $(LIBPCAP_IPK_DIR)/CONTROL $(LIBPCAP_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(LIBPCAP_VERSION)-$(LIBPCAP_RELEASE)/" $(LIBPCAP_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(LIBPCAP_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(LIBPCAP_BUILD_DIR)
-
-
-libpcap-source: $(DL_DIR)/$(LIBPCAP_SOURCE)
-
-libpcap-ipk: ipkg-utils $(LIBPCAP_IPK)
-
-libpcap-clean:
- $(MAKE) -C $(LIBPCAP_DIR) clean
-
-libpcap-clean-all:
- rm -rf $(LIBPCAP_DIR)
- rm -rf $(LIBPCAP_BUILD_DIR)
- rm -rf $(LIBPCAP_IPK)
- rm -rf $(STAGING_DIR)/include/pcap*.h
- rm -rf $(STAGING_DIR)/lib/libpcap.a
- rm -rf $(STAGING_DIR)/lib/libpcap.so*
+++ /dev/null
-libpthread-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/libpthread/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/libpthread/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/libpthread ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/libpthread_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-#############################################################
-#
-# libtool
-#
-#############################################################
-LIBTOOL_SOURCE:=libtool_1.4.3.orig.tar.gz
-LIBTOOL_SITE:=http://ftp.debian.org/debian/pool/main/libt/libtool
-LIBTOOL_CAT:=zcat
-LIBTOOL_DIR:=$(BUILD_DIR)/libtool-1.4.3
-LIBTOOL_BINARY:=libtool
-LIBTOOL_TARGET_BINARY:=usr/bin/libtool
-
-$(DL_DIR)/$(LIBTOOL_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBTOOL_SITE)/$(LIBTOOL_SOURCE)
-
-libtool-source: $(DL_DIR)/$(LIBTOOL_SOURCE)
-
-$(LIBTOOL_DIR)/.unpacked: $(DL_DIR)/$(LIBTOOL_SOURCE)
- $(LIBTOOL_CAT) $(DL_DIR)/$(LIBTOOL_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LIBTOOL_DIR)/.unpacked
-
-$(LIBTOOL_DIR)/.configured: $(LIBTOOL_DIR)/.unpacked
- (cd $(LIBTOOL_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(LIBTOOL_DIR)/.configured
-
-$(LIBTOOL_DIR)/$(LIBTOOL_BINARY): $(LIBTOOL_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LIBTOOL_DIR)
- touch -c $(LIBTOOL_DIR)/$(LIBTOOL_BINARY)
-
-$(TARGET_DIR)/$(LIBTOOL_TARGET_BINARY): $(LIBTOOL_DIR)/$(LIBTOOL_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(LIBTOOL_DIR) install;
- $(STRIP) $(TARGET_DIR)//usr/lib/libltdl.so.*.*.* > /dev/null 2>&1
- $(SED) "s,^CC.*,CC=\"/usr/bin/gcc\"," $(TARGET_DIR)/usr/bin/libtool
- $(SED) "s,^LD.*,LD=\"/usr/bin/ld\"," $(TARGET_DIR)/usr/bin/libtool
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-libtool: uclibc $(TARGET_DIR)/$(LIBTOOL_TARGET_BINARY)
-
-libtool-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(LIBTOOL_DIR) uninstall
- -$(MAKE) -C $(LIBTOOL_DIR) clean
-
-libtool-dirclean:
- rm -rf $(LIBTOOL_DIR)
-
+++ /dev/null
-#############################################################
-#
-# links (text based web browser)
-#
-#############################################################
-LINKS_SITE:=http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/links/download/no-ssl
-LINKS_SOURCE:=links-0.99pre9-no-ssl.tar.gz
-LINKS_DIR:=$(BUILD_DIR)/links-0.99pre9-no-ssl
-
-$(DL_DIR)/$(LINKS_SOURCE):
- $(WGET) -P $(DL_DIR) $(LINKS_SITE)/$(LINKS_SOURCE)
-
-links-source: $(DL_DIR)/$(LINKS_SOURCE)
-
-$(LINKS_DIR)/.unpacked: $(DL_DIR)/$(LINKS_SOURCE)
- zcat $(DL_DIR)/$(LINKS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LINKS_DIR)/.unpacked
-
-$(LINKS_DIR)/.configured: $(LINKS_DIR)/.unpacked
- (cd $(LINKS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/tmp \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(LINKS_DIR)/.configured
-
-$(LINKS_DIR)/links: $(LINKS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LINKS_DIR)
- $(STRIP) $(LINKS_DIR)/links
-
-$(TARGET_DIR)/usr/bin/links: $(LINKS_DIR)/links
- install -c $(LINKS_DIR)/links $(TARGET_DIR)/usr/bin/links
-
-links-clean:
- $(MAKE) -C $(LINKS_DIR) clean
-
-links-dirclean:
- rm -rf $(LINKS_DIR)
-
-links: uclibc $(TARGET_DIR)/usr/bin/links
-
+++ /dev/null
-#############################################################
-#
-# lrzsz (provides zmodem)
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-LRZSZ_SITE:=http://www.ohse.de/uwe/releases
-LRZSZ_SOURCE:=lrzsz-0.12.20.tar.gz
-LRZSZ_DIR:=$(BUILD_DIR)/lrzsz-0.12.20
-
-$(DL_DIR)/$(LRZSZ_SOURCE):
- $(WGET) -P $(DL_DIR) $(LRZSZ_SITE)/$(LRZSZ_SOURCE)
-
-lrzsz-source: $(DL_DIR)/$(LRZSZ_SOURCE)
-
-$(LRZSZ_DIR)/.unpacked: $(DL_DIR)/$(LRZSZ_SOURCE)
- zcat $(DL_DIR)/$(LRZSZ_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LRZSZ_DIR)/.unpacked
-
-$(LRZSZ_DIR)/.configured: $(LRZSZ_DIR)/.unpacked
- (cd $(LRZSZ_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/tmp \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --disable-timesync \
- );
- $(SED) "s/-lnsl//;" $(LRZSZ_DIR)/src/Makefile
- $(SED) "s~\(#define ENABLE_SYSLOG.*\)~/* \1 */~;" $(LRZSZ_DIR)/config.h
- touch $(LRZSZ_DIR)/.configured
-
-$(LRZSZ_DIR)/src/lrz: $(LRZSZ_DIR)/.configured
- $(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" prefix="$(TARGET_DIR)" -C $(LRZSZ_DIR)
- $(STRIP) $(LRZSZ_DIR)/src/lrz $(LRZSZ_DIR)/src/lsz
-
-$(TARGET_DIR)/usr/bin/rz: $(LRZSZ_DIR)/src/lrz
- cp $(LRZSZ_DIR)/src/lrz $(TARGET_DIR)/usr/bin/rz
- cp $(LRZSZ_DIR)/src/lsz $(TARGET_DIR)/usr/bin/sz
-
-lrzsz: uclibc $(TARGET_DIR)/usr/bin/rz
-
-lrzsz-clean:
- rm -f $(TARGET_DIR)/usr/bin/rz
- -$(MAKE) -C $(LRZSZ_DIR) clean
-
-lrzsz-dirclean:
- rm -rf $(LRZSZ_DIR)
+++ /dev/null
-#############################################################
-#
-# ltp-testsuite
-#
-#############################################################
-LTP_TESTSUITE_SOURCE:=ltp-full-20040206.tgz
-LTP_TESTSUITE_SITE:=http://aleron.dl.sourceforge.net/sourceforge/ltp
-LTP_TESTSUITE_CAT:=zcat
-LTP_TESTSUITE_DIR:=$(BUILD_DIR)/ltp-full-20040206
-LTP_TESTSUITE_PATCH:=$(SOURCE_DIR)/ltp-testsuite.patch
-
-
-$(DL_DIR)/$(LTP_TESTSUITE_SOURCE):
- $(WGET) -P $(DL_DIR) $(LTP_TESTSUITE_SITE)/$(LTP_TESTSUITE_SOURCE)
-
-ltp-testsuite-source: $(DL_DIR)/$(LTP_TESTSUITE_SOURCE)
-
-$(LTP_TESTSUITE_DIR)/.unpacked: $(DL_DIR)/$(LTP_TESTSUITE_SOURCE)
- $(LTP_TESTSUITE_CAT) $(DL_DIR)/$(LTP_TESTSUITE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(LTP_TESTSUITE_PATCH) | patch -p1 -d $(LTP_TESTSUITE_DIR)
- touch $(LTP_TESTSUITE_DIR)/.unpacked
-
-$(LTP_TESTSUITE_DIR)/ltp-testsuite: $(LTP_TESTSUITE_DIR)/.unpacked
- $(MAKE) $(TARGET_CONFIGURE_OPTS) CROSS_COMPILER=$(TARGET_CROSS) \
- -C $(LTP_TESTSUITE_DIR)
-
-$(TARGET_DIR)/usr/bin/ltp-testsuite: $(LTP_TESTSUITE_DIR)/ltp-testsuite
- $(MAKE) $(TARGET_CONFIGURE_OPTS) CROSS_COMPILER=$(TARGET_CROSS) \
- -C $(LTP_TESTSUITE_DIR) install
-
-ltp-testsuite: uclibc $(TARGET_DIR)/usr/bin/ltp-testsuite
-
-ltp-testsuite-clean:
- $(MAKE) -C $(LTP_TESTSUITE_DIR) clean
-
-ltp-testsuite-dirclean:
- rm -rf $(LTP_TESTSUITE_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# ltrace
-#
-#############################################################
-LTRACE_SOURCE=ltrace_0.3.31.tar.gz
-LTRACE_SITE=http://ftp.debian.org/debian/pool/main/l/ltrace
-LTRACE_DIR=$(BUILD_DIR)/ltrace-0.3.31
-LTRACE_BINARY=ltrace
-LTRACE_TARGET_BINARY=usr/bin/ltrace
-
-$(DL_DIR)/$(LTRACE_SOURCE):
- $(WGET) -P $(DL_DIR) $(LTRACE_SITE)/$(LTRACE_SOURCE)
-
-$(LTRACE_DIR)/.source: $(DL_DIR)/$(LTRACE_SOURCE)
- zcat $(DL_DIR)/$(LTRACE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LTRACE_DIR)/.source
-
-$(LTRACE_DIR)/.configured: $(LTRACE_DIR)/.source
- (cd $(LTRACE_DIR); \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- );
- touch $(LTRACE_DIR)/.configured;
-
-$(LTRACE_DIR)/$(LTRACE_BINARY): $(LTRACE_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LTRACE_DIR)
-
-$(TARGET_DIR)/$(LTRACE_TARGET_BINARY): $(LTRACE_DIR)/$(LTRACE_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(LTRACE_DIR) install
- rm -Rf $(TARGET_DIR)/usr/man
-
-ltrace: uclibc $(TARGET_DIR)/$(LTRACE_TARGET_BINARY)
-
-ltrace-source: $(DL_DIR)/$(LTRACE_SOURCE)
-
-ltrace-clean:
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LTRACE_DIR) uninstall
- -$(MAKE) -C $(LTRACE_DIR) clean
-
-ltrace-dirclean:
- rm -rf $(LTRACE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# lzo
-#
-# Note: this builds only a static library, it does not provide
-# anything to be installed into the target system.
-#
-#############################################################
-LZO_SOURCE:=lzo_1.08.orig.tar.gz
-LZO_SITE:=http://ftp.debian.org/debian/pool/main/l/lzo
-#LZO_SOURCE:=lzo-1.08.tar.bz2
-#LZO_SITE:=http://www.oberhumer.com/opensource/lzo/download
-LZO_DIR:=$(BUILD_DIR)/lzo-1.08
-LZO_CAT:=zcat
-LZO_PATCH:=$(SOURCE_DIR)/lzo-cross-compile.patch
-
-$(DL_DIR)/$(LZO_SOURCE):
- $(WGET) -P $(DL_DIR) $(LZO_SITE)/$(LZO_SOURCE)
-
-lzo-source: $(DL_DIR)/$(LZO_SOURCE)
-
-$(LZO_DIR)/.unpacked: $(DL_DIR)/$(LZO_SOURCE)
- $(LZO_CAT) $(DL_DIR)/$(LZO_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(LZO_PATCH) | patch -p1 -d $(LZO_DIR)
- touch $(LZO_DIR)/.unpacked
-
-LZO_CONFIG_SHARED:=--disable-shared
-#LZO_CONFIG_SHARED:=--enable-shared
-
-$(LZO_DIR)/.configured: $(LZO_DIR)/.unpacked
- (cd $(LZO_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(LZO_CONFIG_SHARED) \
- );
- touch $(LZO_DIR)/.configured
-
-$(LZO_DIR)/src/liblzo.la: $(LZO_DIR)/.configured
- $(MAKE) -C $(LZO_DIR)
-
-$(STAGING_DIR)/lib/liblzo.a: $(LZO_DIR)/src/liblzo.la
- $(MAKE) CC=$(TARGET_CC) DESTDIR=$(STAGING_DIR) -C $(LZO_DIR) install
-
-lzo: uclibc $(STAGING_DIR)/lib/liblzo.a
-
-lzo-clean:
- $(MAKE) DESTDIR=$(STAGING_DIR) -C $(LZO_DIR) uninstall
- -$(MAKE) -C $(LZO_DIR) clean
-
-lzo-dirclean:
- rm -rf $(LZO_DIR)
-
+++ /dev/null
-#############################################################
-#
-# m4
-#
-#############################################################
-M4_SOURCE:=m4-1.4.tar.gz
-M4_SITE:=ftp://ftp.gnu.org/gnu/m4
-M4_CAT:=zcat
-M4_DIR:=$(BUILD_DIR)/m4-1.4
-M4_BINARY:=m4
-M4_TARGET_BINARY:=usr/bin/m4
-
-$(DL_DIR)/$(M4_SOURCE):
- $(WGET) -P $(DL_DIR) $(M4_SITE)/$(M4_SOURCE)
-
-m4-source: $(DL_DIR)/$(M4_SOURCE)
-
-$(M4_DIR)/.unpacked: $(DL_DIR)/$(M4_SOURCE)
- $(M4_CAT) $(DL_DIR)/$(M4_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(M4_DIR)/.unpacked
-
-$(M4_DIR)/.configured: $(M4_DIR)/.unpacked
- (cd $(M4_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- );
- touch $(M4_DIR)/.configured
-
-$(M4_DIR)/src/$(M4_BINARY): $(M4_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(M4_DIR)
-
-$(TARGET_DIR)/$(M4_TARGET_BINARY): $(M4_DIR)/src/$(M4_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(M4_DIR) install;
- $(STRIP) $(TARGET_DIR)/$(M4_TARGET_BINARY) > /dev/null 2>&1
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-m4: uclibc $(TARGET_DIR)/$(M4_TARGET_BINARY)
-
-m4-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(M4_DIR) uninstall
- -$(MAKE) -C $(M4_DIR) clean
-
-m4-dirclean:
- rm -rf $(M4_DIR)
-
+++ /dev/null
-#############################################################
-#
-# make
-#
-#############################################################
-GNUMAKE_SOURCE:=make-3.80.tar.bz2
-GNUMAKE_SITE:=ftp://ftp.gnu.org/gnu/make
-GNUMAKE_DIR:=$(BUILD_DIR)/make-3.80
-GNUMAKE_CAT:=bzcat
-GNUMAKE_BINARY:=make
-GNUMAKE_TARGET_BINARY:=usr/bin/make
-
-$(DL_DIR)/$(GNUMAKE_SOURCE):
- $(WGET) -P $(DL_DIR) $(GNUMAKE_SITE)/$(GNUMAKE_SOURCE)
-
-make-source: $(DL_DIR)/$(GNUMAKE_SOURCE)
-
-$(GNUMAKE_DIR)/.unpacked: $(DL_DIR)/$(GNUMAKE_SOURCE)
- $(GNUMAKE_CAT) $(DL_DIR)/$(GNUMAKE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GNUMAKE_DIR)/.unpacked
-
-$(GNUMAKE_DIR)/.configured: $(GNUMAKE_DIR)/.unpacked
- (cd $(GNUMAKE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(GNUMAKE_DIR)/.configured
-
-$(GNUMAKE_DIR)/$(GNUMAKE_BINARY): $(GNUMAKE_DIR)/.configured
- $(MAKE) -C $(GNUMAKE_DIR)
-
-$(TARGET_DIR)/$(GNUMAKE_TARGET_BINARY): $(GNUMAKE_DIR)/$(GNUMAKE_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUMAKE_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-make: uclibc $(TARGET_DIR)/$(GNUMAKE_TARGET_BINARY)
-
-make-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUMAKE_DIR) uninstall
- -$(MAKE) -C $(GNUMAKE_DIR) clean
-
-make-dirclean:
- rm -rf $(GNUMAKE_DIR)
-
+++ /dev/null
-## matrixssl
-
-MATRIXSSL_VERSION := 1.2.1
-MATRIXSSL_RELEASE := 1
-
-MATRIXSSL_SOURCE := matrixssl-1-2-1.tar.gz
-#MATRIXSSL_SITE := http://www.matrixssl.org/
-MATRIXSSL_SITE := http://nthill.free.fr/openwrt/sources/
-MATRIXSSL_DIR := $(BUILD_DIR)/matrixssl
-MATRIXSSL_CAT := zcat
-
-MATRIXSSL_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/matrixssl
-
-MATRIXSSL_BUILD_DIR := $(BUILD_DIR)/libmatrixssl_$(MATRIXSSL_VERSION)-$(MATRIXSSL_RELEASE)
-MATRIXSSL_IPK_DIR := $(OPENWRT_IPK_DIR)/libmatrixssl
-MATRIXSSL_IPK := $(MATRIXSSL_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(MATRIXSSL_SOURCE):
- $(WGET) -P $(DL_DIR) $(MATRIXSSL_SITE)/$(MATRIXSSL_SOURCE)
-
-
-$(MATRIXSSL_DIR)/.stamp-unpacked: $(DL_DIR)/$(MATRIXSSL_SOURCE)
- $(MATRIXSSL_CAT) $(DL_DIR)/$(MATRIXSSL_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(MATRIXSSL_DIR)/.stamp-unpacked
-
-
-$(MATRIXSSL_DIR)/.stamp-patched: $(MATRIXSSL_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(MATRIXSSL_DIR) $(MATRIXSSL_PATCH_DIR)
-
- touch $(MATRIXSSL_DIR)/.stamp-patched
-
-
-$(MATRIXSSL_DIR)/.stamp-built: $(MATRIXSSL_DIR)/.stamp-patched
- cd $(MATRIXSSL_DIR) ; \
- $(MAKE) -C src \
- CC=$(TARGET_CC) \
- DFLAGS="$(TARGET_CFLAGS)" \
- STRIP=/bin/true \
- all
-
- touch $(MATRIXSSL_DIR)/.stamp-built
-
-
-$(MATRIXSSL_BUILD_DIR): $(MATRIXSSL_DIR)/.stamp-built
- mkdir -p $(MATRIXSSL_BUILD_DIR)
-
- install -m0755 -d $(STAGING_DIR)/include/matrixSsl
- install -m0644 $(MATRIXSSL_DIR)/matrixSsl.h $(STAGING_DIR)/include/matrixSsl/
- ln -fs matrixSsl/matrixSsl.h $(STAGING_DIR)/include/
- install -m0755 $(MATRIXSSL_DIR)/src/libmatrixssl.so $(STAGING_DIR)/lib/libmatrixssl.so.$(MATRIXSSL_VERSION)
- ln -fs libmatrixssl.so.$(MATRIXSSL_VERSION) $(STAGING_DIR)/lib/libmatrixssl.so.1.2
- ln -fs libmatrixssl.so.1.2 $(STAGING_DIR)/lib/libmatrixssl.so
-
- mkdir -p $(MATRIXSSL_BUILD_DIR)/usr/lib
- cp -a $(STAGING_DIR)/lib/libmatrixssl.so.* $(MATRIXSSL_BUILD_DIR)/usr/lib/
-
- $(STRIP) $(MATRIXSSL_BUILD_DIR)/usr/lib/libmatrixssl.so.*
-
-
-$(MATRIXSSL_IPK): $(MATRIXSSL_BUILD_DIR)
- cp -a $(MATRIXSSL_IPK_DIR)/CONTROL $(MATRIXSSL_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(MATRIXSSL_VERSION)-$(MATRIXSSL_RELEASE)/" $(MATRIXSSL_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(MATRIXSSL_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(MATRIXSSL_BUILD_DIR)
-
-
-matrixssl-ipk: ipkg-utils libpthread-ipk $(MATRIXSSL_IPK)
-
-matrixssl-clean:
- $(MAKE) -C $(MATRIXSSL_DIR) clean
-
-matrixssl-clean-all:
- rm -rf $(MATRIXSSL_DIR)
- rm -rf $(MATRIXSSL_BUILD_DIR)
- rm -rf $(MATRIXSSL_IPK)
- rm -rf $(STAGING_DIR)/include/pcap*.h
- rm -rf $(STAGING_DIR)/lib/libpcap.a
- rm -rf $(STAGING_DIR)/lib/libpcap.so*
+++ /dev/null
-#############################################################
-#
-# microcom terminal emulator
-#
-# Maintainer: Tim Riker <Tim@Rikers.org>
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-# TARGETS
-# http://microcom.port5.com/m102.tar.gz
-MICROCOM_SITE:=http://microcom.port5.com/
-MICROCOM_SOURCE:=m102.tar.gz
-MICROCOM_DIR:=$(BUILD_DIR)/microcom-1.02
-
-$(DL_DIR)/$(MICROCOM_SOURCE):
- $(WGET) -P $(DL_DIR) $(MICROCOM_SITE)/$(MICROCOM_SOURCE)
-
-microcom-source: $(DL_DIR)/$(MICROCOM_SOURCE)
-
-$(MICROCOM_DIR)/.unpacked: $(DL_DIR)/$(MICROCOM_SOURCE)
- mkdir -p $(MICROCOM_DIR)
- zcat $(DL_DIR)/$(MICROCOM_SOURCE) | tar -C $(MICROCOM_DIR) -xvf -
- touch $(MICROCOM_DIR)/.unpacked
-
-$(MICROCOM_DIR)/.configured: $(MICROCOM_DIR)/.unpacked
- $(SED) 's~gcc~${TARGET_CC}~' $(MICROCOM_DIR)/Makefile
- touch $(MICROCOM_DIR)/.configured
-
-$(MICROCOM_DIR)/microcom: $(MICROCOM_DIR)/.configured
- $(MAKE) -C $(MICROCOM_DIR)
-
-$(TARGET_DIR)/usr/bin/microcom: $(MICROCOM_DIR)/microcom
- install -c $(MICROCOM_DIR)/microcom $(TARGET_DIR)/usr/bin/microcom
-
-microcom-clean:
- rm $(MICROCOM_DIR)/*.o
-
-microcom-dirclean:
- rm -rf $(MICROCOM_DIR)
-
-microcom: uclibc $(TARGET_DIR)/usr/bin/microcom
-
+++ /dev/null
-#############################################################
-#
-# Microwindows - 2003/11/17 Greg Haerr
-# (requires CVS 2003/11/17 or later)
-#
-#############################################################
-MICROWIN_SITE:=ftp://ftp.microwindows.org/pub/microwindows
-MICROWIN_SOURCE:=microwindows-src-snapshot.tar.gz
-MICROWIN_DIR:=$(BUILD_DIR)/microwin
-#MICROWIN_SOURCE:=microwindows-0.91.tar.gz
-#MICROWIN_DIR:=$(BUILD_DIR)/microwindows-0.91
-
-MICROWIN_CAT:=zcat
-MICROWIN_BINARY:=$(MICROWIN_DIR)/src/bin/nano-X
-MICROWIN_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/nano-X
-
-MICROWIN_CONFIG:=$(MICROWIN_DIR)/src/Configs/config.uclibc
-
-$(DL_DIR)/$(MICROWIN_SOURCE):
- $(WGET) -P $(DL_DIR) $(MICROWIN_SITE)/$(MICROWIN_SOURCE)
-
-microwin-source: $(DL_DIR)/$(MICROWIN_SOURCE)
-
-$(MICROWIN_DIR)/.unpacked: $(DL_DIR)/$(MICROWIN_SOURCE)
- $(MICROWIN_CAT) $(DL_DIR)/$(MICROWIN_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MICROWIN_DIR)/.unpacked
-
-$(MICROWIN_DIR)/.configured: $(MICROWIN_DIR)/.unpacked
- (cd $(MICROWIN_DIR); \
- );
- touch $(MICROWIN_DIR)/.configured
-
-$(MICROWIN_BINARY): $(MICROWIN_DIR)/.configured
- $(MAKE) ARCH=LINUX-$(shell echo $(ARCH) | tr a-z A-Z) $(shell echo $(ARCH) | tr a-z A-Z)TOOLSPREFIX=$(TARGET_CROSS) CC=$(TARGET_CC) -C $(MICROWIN_DIR)/src CONFIG=$(MICROWIN_CONFIG)
-
-$(MICROWIN_TARGET_BINARY): $(MICROWIN_BINARY)
- $(MAKE) INSTALL_PREFIX=$(TARGET_DIR)/usr INSTALL_OWNER1= INSTALL_OWNER2= CC=$(TARGET_CC) -C $(MICROWIN_DIR)/src CONFIG=$(MICROWIN_CONFIG) install
-
-microwin: uclibc $(MICROWIN_TARGET_BINARY)
-
-microwin-clean:
- -$(MAKE) -C $(MICROWIN_DIR)/src clean
-
-microwin-dirclean:
- rm -rf $(MICROWIN_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mkdosfs
-#
-#############################################################
-MKDOSFS_SOURCE=dosfstools-2.8.src.tar.gz
-MKDOSFS_SITE=http://ftp.uni-erlangen.de/pub/Linux/LOCAL/dosfstools
-MKDOSFS_DIR=$(BUILD_DIR)/dosfstools-2.8
-MKDOSFS_CAT:=zcat
-MKDOSFS_BINARY:=mkdosfs/mkdosfs
-MKDOSFS_TARGET_BINARY:=sbin/mkdosfs
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-MKDOSFS_CFLAGS="-Os -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64"
-else
-MKDOSFS_CFLAGS="-Os -g"
-endif
-
-$(DL_DIR)/$(MKDOSFS_SOURCE):
- $(WGET) -P $(DL_DIR) $(MKDOSFS_SITE)/$(MKDOSFS_SOURCE)
-
-mkdosfs-source: $(DL_DIR)/$(MKDOSFS_SOURCE)
-
-$(MKDOSFS_DIR)/.unpacked: $(DL_DIR)/$(MKDOSFS_SOURCE)
- $(MKDOSFS_CAT) $(DL_DIR)/$(MKDOSFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MKDOSFS_DIR)/.unpacked
-
-$(MKDOSFS_DIR)/$(MKDOSFS_BINARY): $(MKDOSFS_DIR)/.unpacked
- $(MAKE) CFLAGS=$(MKDOSFS_CFLAGS) CC=$(TARGET_CC) -C $(MKDOSFS_DIR);
- $(STRIP) $(MKDOSFS_DIR)/mkdosfs/mkdosfs;
- touch -c $(MKDOSFS_DIR)/mkdosfs/mkdosfs
-
-$(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY): $(MKDOSFS_DIR)/$(MKDOSFS_BINARY)
- cp -a $(MKDOSFS_DIR)/$(MKDOSFS_BINARY) $(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY)
- touch -c $(TARGET_DIR)/sbin/mkdosfs
-
-mkdosfs: uclibc $(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY)
-
-mkdosfs-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(MKDOSFS_DIR) uninstall
- -$(MAKE) -C $(MKDOSFS_DIR) clean
-
-mkdosfs-dirclean:
- rm -rf $(MKDOSFS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mke2fs
-#
-#############################################################
-MKE2FS_SOURCE=e2fsprogs-1.27.tar.gz
-MKE2FS_SITE=http://aleron.dl.sourceforge.net/sourceforge/e2fsprogs
-MKE2FS_DIR=$(BUILD_DIR)/e2fsprogs-1.27
-MKE2FS_CAT:=zcat
-MKE2FS_BINARY:=misc/mke2fs
-MKE2FS_TARGET_BINARY:=sbin/mke2fs
-
-$(DL_DIR)/$(MKE2FS_SOURCE):
- $(WGET) -P $(DL_DIR) $(MKE2FS_SITE)/$(MKE2FS_SOURCE)
-
-mke2fs-source: $(DL_DIR)/$(MKE2FS_SOURCE)
-
-$(MKE2FS_DIR)/.unpacked: $(DL_DIR)/$(MKE2FS_SOURCE)
- $(MKE2FS_CAT) $(DL_DIR)/$(MKE2FS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MKE2FS_DIR)/.unpacked
-
-$(MKE2FS_DIR)/.configured: $(MKE2FS_DIR)/.unpacked
- (cd $(MKE2FS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --with-cc=$(TARGET_CC) \
- --with-linker=$(TARGET_CROSS)ld \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --disable-elf-shlibs --disable-swapfs \
- --disable-debugfs --disable-imager \
- --disable-resizer --disable-fsck \
- --without-catgets $(DISABLE_NLS) \
- );
- touch $(MKE2FS_DIR)/.configured
-
-$(MKE2FS_DIR)/$(MKE2FS_BINARY): $(MKE2FS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(MKE2FS_DIR)
- $(STRIP) $(MKE2FS_DIR)/misc/mke2fs $(MKE2FS_DIR)/misc/badblocks;
- touch -c $(MKE2FS_DIR)/misc/mke2fs
-
-$(TARGET_DIR)/$(MKE2FS_TARGET_BINARY): $(MKE2FS_DIR)/$(MKE2FS_BINARY)
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(MKE2FS_DIR) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Only install a few selected items...
- cp -dpf $(MKE2FS_DIR)/misc/mke2fs $(TARGET_DIR)/sbin/mke2fs;
- cp -dpf $(MKE2FS_DIR)/misc/badblocks $(TARGET_DIR)/sbin/badblocks;
- touch -c $(TARGET_DIR)/sbin/mke2fs
-
-mke2fs: uclibc $(TARGET_DIR)/$(MKE2FS_TARGET_BINARY)
-
-mke2fs-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(MKE2FS_DIR) uninstall
- rm -f $(TARGET_DIR)/sbin/mke2fs $(TARGET_DIR)/sbin/badblocks;
- -$(MAKE) -C $(MKE2FS_DIR) clean
-
-mke2fs-dirclean:
- rm -rf $(MKE2FS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mrouted
-#
-#
-#############################################################
-MROUTED_SOURCE:=mrouted_3.9-beta3.orig.tar.gz
-MROUTED_SITE:=http://ftp.debian.org/debian/pool/non-free/m/mrouted
-MROUTED_DIR:=$(BUILD_DIR)/mrouted-3.9-beta3.orig
-MROUTED_CAT:=zcat
-#MROUTED_PATCH:=$(SOURCE_DIR)/mrouted_3.9-beta3-1.1.diff
-MROUTED_PATCH:=mrouted_3.9-beta3-1.1.diff.gz
-MROUTED_BINARY:=mrouted
-MROUTED_TARGET_BINARY:=usr/sbin/mrouted
-
-$(DL_DIR)/$(MROUTED_SOURCE):
- $(WGET) -P $(DL_DIR) $(MROUTED_SITE)/$(MROUTED_SOURCE)
-
-$(DL_DIR)/$(MROUTED_PATCH):
- $(WGET) -P $(DL_DIR) $(MROUTED_SITE)/$(MROUTED_PATCH)
-
-mrouted-source: $(DL_DIR)/$(MROUTED_SOURCE) $(DL_DIR)/$(MROUTED_PATCH)
-
-$(MROUTED_DIR)/.unpacked: mrouted-source
- $(MROUTED_CAT) $(DL_DIR)/$(MROUTED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(MROUTED_CAT) $(DL_DIR)/$(MROUTED_PATCH) | patch -p1 -d $(MROUTED_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(MROUTED_DIR) $(SOURCE_DIR) mrouted-*.patch
- touch $(MROUTED_DIR)/.unpacked
-
-$(MROUTED_DIR)/$(MROUTED_BINARY): $(MROUTED_DIR)/.unpacked
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(MROUTED_DIR)
-
-$(TARGET_DIR)/$(MROUTED_TARGET_BINARY): $(MROUTED_DIR)/$(MROUTED_BINARY)
- cp -a $(MROUTED_DIR)/$(MROUTED_BINARY) $(TARGET_DIR)/$(MROUTED_TARGET_BINARY)
-
-mrouted: uclibc $(TARGET_DIR)/$(MROUTED_TARGET_BINARY)
-
-mrouted-clean:
- rm -f $(TARGET_DIR)/$(MROUTED_TARGET_BINARY)
- -$(MAKE) -C $(MROUTED_DIR) clean
-
-mrouted-dirclean:
- rm -rf $(MROUTED_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ncurses
-# this installs only a few vital termcap entries
-#
-#############################################################
-# Copyright (C) 2002 by Ken Restivo <ken@246gt.com>
-# $Id$
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-# TARGETS
-NCURSES_SITE:=ftp://ftp.gnu.org/pub/gnu/ncurses
-NCURSES_DIR:=$(BUILD_DIR)/ncurses-5.2
-NCURSES_SOURCE:=ncurses-5.2.tar.gz
-
-$(DL_DIR)/$(NCURSES_SOURCE):
- $(WGET) -P $(DL_DIR) $(NCURSES_SITE)/$(NCURSES_SOURCE)
-
-$(NCURSES_DIR)/.dist: $(DL_DIR)/$(NCURSES_SOURCE)
- gunzip -c $(DL_DIR)/$(NCURSES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #use the local tic and not whatever the build system was going to find.
- $(SED) 's~\$$srcdir/shlib tic\$$suffix~/usr/bin/tic~' \
- $(NCURSES_DIR)/misc/run_tic.in
- touch $(NCURSES_DIR)/.dist
-
-$(NCURSES_DIR)/.configured: $(NCURSES_DIR)/.dist
- (cd $(NCURSES_DIR); rm -rf config.cache; \
- BUILD_CC=$(TARGET_CC) HOSTCC=$(HOSTCC) \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --with-terminfo-dirs=/usr/share/terminfo \
- --with-default-terminfo-dir=/usr/share/terminfo \
- --libdir=$(STAGING_DIR)/lib \
- --with-shared --without-cxx --without-cxx-binding \
- --without-ada --without-progs $(DISABLE_NLS) \
- --without-profile --without-debug --disable-rpath \
- --enable-echo --enable-const --enable-overwrite \
- );
- touch $(NCURSES_DIR)/.configured
-
-$(NCURSES_DIR)/lib/libncurses.so.5.2: $(NCURSES_DIR)/.configured
- $(MAKE) BUILD_CC=$(TARGET_CC) HOSTCC=$(HOSTCC) \
- BUILD_CCFLAGS="-I$(NCURSES_DIR) -I$(NCURSES_DIR)/include" \
- BUILD_LDFLAGS="" DESTDIR=$(STAGING_DIR) -C $(NCURSES_DIR) \
- libs panel menu form headers
-
-$(STAGING_DIR)/lib/libncurses.a: $(NCURSES_DIR)/lib/libncurses.so.5.2
- BUILD_CC=$(TARGET_CC) HOSTCC=$(HOSTCC) CC=$(TARGET_CC) \
- $(MAKE) \
- prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/lib \
- datadir=$(STAGING_DIR)/usr/share \
- sysconfdir=$(STAGING_DIR)/etc \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- includedir=$(STAGING_DIR)/include \
- gxx_include_dir=$(STAGING_DIR)/include/c++ \
- ticdir=$(STAGING_DIR)/usr/share/terminfo \
- -C $(NCURSES_DIR) install;
- chmod a-x $(NCURSES_DIR)/lib/libncurses.so*
- touch -c $(STAGING_DIR)/lib/libncurses.a
-
-$(TARGET_DIR)/lib/libncurses.so.5.2: $(STAGING_DIR)/lib/libncurses.a
- cp -dpf $(NCURSES_DIR)/lib/libncurses.so* $(TARGET_DIR)/lib/
- -cp -dpf $(STAGING_DIR)/usr/lib/terminfo $(TARGET_DIR)/usr/lib/
- mkdir -p $(TARGET_DIR)/usr/share/terminfo
- for i in x/xterm x/xterm-color x/xterm-xfree86 v/vt100 v/vt200 a/ansi l/linux; do \
- cp -dpf $(STAGING_DIR)/usr/share/terminfo/$${i} $(TARGET_DIR)/usr/share/terminfo/; \
- done
-
-$(TARGET_DIR)/usr/lib/libncurses.a: $(STAGING_DIR)/lib/libncurses.a
- cp -dpf $(NCURSES_DIR)/include/curses.h $(TARGET_DIR)/usr/include/ncurses.h
- cp -dpf $(NCURSES_DIR)/include/term.h $(TARGET_DIR)/usr/include/
- cp -dpf $(NCURSES_DIR)/include/unctrl.h $(TARGET_DIR)/usr/include/
- cp -dpf $(NCURSES_DIR)/include/termcap.h $(TARGET_DIR)/usr/include/
- cp -dpf $(NCURSES_DIR)/lib/libncurses.a $(TARGET_DIR)/usr/lib/
- rm -f $(TARGET_DIR)/usr/lib/terminfo
- (cd $(TARGET_DIR)/usr/lib; ln -fs /usr/share/terminfo)
- (cd $(TARGET_DIR)/usr/lib; ln -fs libncurses.a libcurses.a)
- (cd $(TARGET_DIR)/usr/lib; ln -fs libncurses.a libtermcap.a)
- (cd $(TARGET_DIR)/usr/include; ln -fs ncurses.h curses.h)
- rm -f $(TARGET_DIR)/lib/libncurses.so
- (cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libncurses.so.5.2 libncurses.so)
- -$(STRIP) $(TARGET_DIR)/lib/libncurses.so.5.2
- touch -c $(TARGET_DIR)/usr/lib/libncurses.a
-
-ncurses-headers: $(TARGET_DIR)/usr/lib/libncurses.a
-
-ncurses-source: $(DL_DIR)/$(NCURSES_SOURCE)
-
-ncurses-clean:
- rm -f $(STAGING_DIR)/lib/libncurses.so* $(TARGET_DIR)/lib/libncurses.so*
- rm -f $(STAGING_DIR)/usr/share/tabset $(TARGET_DIR)/usr/share/tabset
- rm -rf $(STAGING_DIR)/usr/share/terminfo $(TARGET_DIR)/usr/share/terminfo
- -$(MAKE) -C $(NCURSES_DIR) clean
-
-ncurses-dirclean:
- rm -rf $(NCURSES_DIR)
-
-ncurses: $(TARGET_DIR)/lib/libncurses.so.5.2
-
+++ /dev/null
-#############################################################
-#
-# netfilter
-#
-#############################################################
-
-ifeq ($(strip $(USE_NETFILTER_SNAPSHOT)),)
-USE_NETFILTER_SNAPSHOT=20040508
-endif
-NETFILTER_SOURCE:=patch-o-matic-$(USE_NETFILTER_SNAPSHOT).tar.bz2
-NETFILTER_DIR:=$(BUILD_DIR)/patch-o-matic-$(USE_NETFILTER_SNAPSHOT)
-NETFILTER_SITE:=ftp://ftp.netfilter.org/pub/patch-o-matic/snapshot
-NETFILTER_CAT:=bzcat
-
-# ipv6_mld breaks net/ipv6/mcast.c
-NETFILTER_EXCLUDE:=--exclude submitted/89_ipv6_mld_netfilter.patch
-
-NETFILTER_PATCHES:= \
- base \
- extra/CLASSIFY.patch \
- extra/CONNMARK.patch \
- extra/IPMARK.patch \
- extra/condition.patch \
- extra/h323-conntrack-nat.patch \
- extra/mms-conntrack-nat.patch \
- extra/pptp-conntrack-nat.patch \
- extra/string.patch
-
-LINUX_DIR:=$(BUILD_DIR)/WRT54GS/release/src/linux/linux
-
-$(DL_DIR)/$(NETFILTER_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETFILTER_SITE)/$(NETFILTER_SOURCE)
-
-netfilter-source: $(DL_DIR)/$(NETFILTER_SOURCE)
-
-$(NETFILTER_DIR)/.unpacked: $(DL_DIR)/$(NETFILTER_SOURCE)
- $(NETFILTER_CAT) $(DL_DIR)/$(NETFILTER_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #ignore whitespace in patches
- $(SED) "s,\-p1,\-l \-p1," $(NETFILTER_DIR)/runme
- touch $(NETFILTER_DIR)/.unpacked
-
-$(LINUX_DIR)/.nf-patched: $(LINUX_DIR)/.unpacked $(NETFILTER_DIR)/.unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR)/openwrt/kernel/netfilter/patches
- -(cd $(NETFILTER_DIR); KERNEL_DIR=$(LINUX_DIR) ./runme --batch $(NETFILTER_EXCLUDE) $(NETFILTER_PATCHES))
- touch $(LINUX_DIR)/.nf-patched
-
-netfilter: $(LINUX_DIR)/.nf-patched
-
-netfilter-clean:
-
-netfilter-dirclean:
- rm -rf $(NETFILTER_DIR)
+++ /dev/null
-#############################################################
-#
-# netkitbase
-#
-#############################################################
-NETKITBASE_SOURCE:=netkit-base-0.17.tar.gz
-NETKITBASE_SITE:=ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/
-NETKITBASE_DIR:=$(BUILD_DIR)/netkit-base-0.17
-NETKITBASE_CAT:=zcat
-NETKITBASE_BINARY:=inetd/inetd
-NETKITBASE_TARGET_BINARY:=usr/sbin/inetd
-
-$(DL_DIR)/$(NETKITBASE_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETKITBASE_SITE)/$(NETKITBASE_SOURCE)
-
-netkitbase-source: $(DL_DIR)/$(NETKITBASE_SOURCE)
-
-$(NETKITBASE_DIR)/.unpacked: $(DL_DIR)/$(NETKITBASE_SOURCE)
- $(NETKITBASE_CAT) $(DL_DIR)/$(NETKITBASE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # use ANSI syntax
- $(SED) "s/main()/main(void)/;" $(NETKITBASE_DIR)/configure
- # don't try to run cross compiled binaries while configuring things
- $(SED) "s~./__conftest~#./__conftest~;" $(NETKITBASE_DIR)/configure
- touch $(NETKITBASE_DIR)/.unpacked
-
-$(NETKITBASE_DIR)/.configured: $(NETKITBASE_DIR)/.unpacked
- (cd $(NETKITBASE_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
- ./configure --installroot=$(TARGET_DIR) --with-c-compiler=$(TARGET_CC) \
- )
- touch $(NETKITBASE_DIR)/.configured
-
-$(NETKITBASE_DIR)/$(NETKITBASE_BINARY): $(NETKITBASE_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(NETKITBASE_DIR)
- $(STRIP) $(NETKITBASE_DIR)/$(NETKITBASE_BINARY)
-
-$(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY): $(NETKITBASE_DIR)/$(NETKITBASE_BINARY)
- # Only install a few selected items...
- mkdir -p $(TARGET_DIR)/usr/sbin
- cp $(NETKITBASE_DIR)/$(NETKITBASE_BINARY) $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY)
- mkdir -p $(TARGET_DIR)/etc
- cp $(NETKITBASE_DIR)/etc.sample/inetd.conf $(TARGET_DIR)/etc/
- $(SED) "s/^\([a-z]\)/#\1/;" $(TARGET_DIR)/etc/inetd.conf
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITBASE_DIR) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-netkitbase: uclibc $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY)
-
-netkitbase-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITBASE_DIR) uninstall
- -rm -f $(TARGET_DIR)/usr/sbin/inetd $(TARGET_DIR)/etc/inetd.conf
- -rm -f $(TARGET_DIR)/etc/inetd.conf
- -$(MAKE) -C $(NETKITBASE_DIR) clean
-
-netkitbase-dirclean:
- rm -rf $(NETKITBASE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# netkittelnet
-#
-#############################################################
-NETKITTELNET_SOURCE:=netkit-telnet-0.17.tar.gz
-NETKITTELNET_SITE:=ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/
-NETKITTELNET_DIR:=$(BUILD_DIR)/netkit-telnet-0.17
-NETKITTELNET_CAT:=zcat
-NETKITTELNET_BINARY:=telnetd/telnetd
-NETKITTELNET_TARGET_BINARY:=usr/sbin/telnetd
-NETKITTELNET_PATCH:=$(SOURCE_DIR)/netkittelnet.patch
-
-$(DL_DIR)/$(NETKITTELNET_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETKITTELNET_SITE)/$(NETKITTELNET_SOURCE)
-
-netkittelnet-source: $(DL_DIR)/$(NETKITTELNET_SOURCE)
-
-$(NETKITTELNET_DIR)/.unpacked: $(DL_DIR)/$(NETKITTELNET_SOURCE)
- $(NETKITTELNET_CAT) $(DL_DIR)/$(NETKITTELNET_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # use ANSI syntax
- $(SED) "s/main()/main(void)/;" $(NETKITTELNET_DIR)/configure
- # Disable termcap support
- $(SED) "s~\(.*termcap\.h.*\)~/* \1 */~;" $(NETKITTELNET_DIR)/telnetd/telnetd.c
- # don't try to run cross compiled binaries while configuring things
- cat $(NETKITTELNET_PATCH) | patch -p1 -d $(NETKITTELNET_DIR)
- touch $(NETKITTELNET_DIR)/.unpacked
-
-$(NETKITTELNET_DIR)/.configured: $(NETKITTELNET_DIR)/.unpacked
- (cd $(NETKITTELNET_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
- ./configure --installroot=$(TARGET_DIR) --with-c-compiler=$(TARGET_CC) \
- )
- touch $(NETKITTELNET_DIR)/.configured
-
-$(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY): $(NETKITTELNET_DIR)/.configured
- $(MAKE) SUB=telnetd CC=$(TARGET_CC) -C $(NETKITTELNET_DIR)
- $(STRIP) $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY)
-
-$(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY): $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY)
- # Only install a few selected items...
- mkdir -p $(TARGET_DIR)/usr/sbin
- rm -f $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY)
- cp $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY) $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY)
- # Enable telnet in inetd
- $(SED) "s~^#telnet.*~telnet\tstream\ttcp\tnowait\troot\t/usr/sbin/telnetd\t/usr/sbin/telnetd~;" $(TARGET_DIR)/etc/inetd.conf
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITTELNET_DIR) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-netkittelnet: uclibc netkitbase $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY)
-
-netkittelnet-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITTELNET_DIR) uninstall
- -rm -f $(TARGET_DIR)/usr/sbin/telnetd
- -$(MAKE) -C $(NETKITTELNET_DIR) clean
-
-netkittelnet-dirclean:
- rm -rf $(NETKITTELNET_DIR)
-
+++ /dev/null
-#############################################################
-#
-# netsnmp
-#
-#############################################################
-
-NETSNMP_URL:=http://aleron.dl.sourceforge.net/sourceforge/net-snmp/
-NETSNMP_DIR:=$(BUILD_DIR)/net-snmp-5.1
-NETSNMP_SOURCE:=net-snmp-5.1.tar.gz
-NETSNMP_PATCH1:=net-snmp_5.1-5.diff.gz
-NETSNMP_PATCH1_URL:=http://ftp.debian.org/debian/pool/main/n/net-snmp/
-NETSNMP_PATCH2:=$(SOURCE_DIR)/netsnmp.patch
-
-$(DL_DIR)/$(NETSNMP_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETSNMP_URL)/$(NETSNMP_SOURCE)
-
-$(DL_DIR)/$(NETSNMP_PATCH1):
- $(WGET) -P $(DL_DIR) $(NETSNMP_PATCH1_URL)/$(NETSNMP_PATCH1)
-
-$(NETSNMP_DIR)/.unpacked: $(DL_DIR)/$(NETSNMP_SOURCE) $(DL_DIR)/$(NETSNMP_PATCH1)
- zcat $(DL_DIR)/$(NETSNMP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- zcat $(DL_DIR)/$(NETSNMP_PATCH1) | patch -p1 -d $(NETSNMP_DIR)
- cat $(NETSNMP_PATCH2) | patch -p1 -d $(NETSNMP_DIR)
- touch $(NETSNMP_DIR)/.unpacked
-
-# We set CAN_USE_SYSCTL to no and use /proc since the
-# sysctl code in this thing is apparently intended for
-# freebsd or some such thing...
-$(NETSNMP_DIR)/.configured: $(NETSNMP_DIR)/.unpacked
- (cd $(NETSNMP_DIR); autoconf; \
- ac_cv_CAN_USE_SYSCTL=no \
- PATH=$(TARGET_PATH) \
- ./configure \
- --with-cc=$(TARGET_CROSS)gcc \
- --with-ar=$(TARGET_CROSS)ar \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --with-endianness=little \
- --with-persistent-directory=/var/lib/snmp \
- --enable-ucd-snmp-compatibility \
- --enable-shared \
- --disable-static \
- --with-logfile=none \
- --without-rpm \
- --with-openssl \
- --without-dmalloc \
- --without-efence \
- --without-rsaref \
- --with-sys-contact="root" \
- --with-sys-location="Unknown" \
- --with-mib-modules="host smux ucd-snmp/dlmod" \
- --with-defaults \
- --prefix=/usr \
- --sysconfdir=/etc \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(NETSNMP_DIR)/.configured
-
-$(NETSNMP_DIR)/agent/snmpd: $(NETSNMP_DIR)/.configured
- $(MAKE) -C $(NETSNMP_DIR)
-
-$(TARGET_DIR)/usr/sbin/snmpd: $(NETSNMP_DIR)/agent/snmpd
- #$(MAKE) DESTDIR=$(TARGET_DIR) -C $(NETSNMP_DIR) install
- $(MAKE) PREFIX=$(TARGET_DIR)/usr \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- persistentdir=$(TARGET_DIR)/var/lib/snmp \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(STAGING_DIR)/include/net-snmp \
- ucdincludedir=$(STAGING_DIR)/include/ucd-snmp \
- -C $(NETSNMP_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Copy the .conf files.
- mkdir -p $(TARGET_DIR)/etc/snmp
- cp $(NETSNMP_DIR)/EXAMPLE.conf $(TARGET_DIR)/etc/snmp/snmpd.conf
- cp $(NETSNMP_DIR)/EXAMPLE-trap.conf $(TARGET_DIR)/etc/snmp/snmptrapd.conf
- -mv $(TARGET_DIR)/usr/share/snmp/mib2c*.conf $(TARGET_DIR)/etc/snmp
- mkdir -p $(TARGET_DIR)/etc/default
- cp $(NETSNMP_DIR)/debian/snmpd.default $(TARGET_DIR)/etc/default/snmpd
- # Remove the unsupported snmpcheck program
- rm $(TARGET_DIR)/usr/bin/snmpcheck
- # Install the "broken" headers
- cp $(NETSNMP_DIR)/agent/mibgroup/struct.h $(STAGING_DIR)/include/net-snmp/agent
- cp $(NETSNMP_DIR)/agent/mibgroup/util_funcs.h $(STAGING_DIR)/include/net-snmp
- cp $(NETSNMP_DIR)/agent/mibgroup/mibincl.h $(STAGING_DIR)/include/net-snmp/library
- cp $(NETSNMP_DIR)/agent/mibgroup/header_complex.h $(STAGING_DIR)/include/net-snmp/agent
-
-netsnmp: $(TARGET_DIR)/usr/sbin/snmpd
-
-netsnmp-headers: $(TARGET_DIR)/usr/include/net-snmp/net-snmp-config.h
- cp -a $(STAGING_DIR)/include/net-snmp $(TARGET_DIR)/usr/include/net-snmp
- cp -a $(STAGING_DIR)/include/ucd-snmp $(TARGET_DIR)/usr/include/net-snmp
-
-netsnmp-source: $(DL_DIR)/$(NETSNMP_SOURCE)
-
-netsnmp-clean:
- $(MAKE) -C $(NETSNMP_DIR) clean
-
-netsnmp-dirclean:
- rm -rf $(NETSNMP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# newt
-#
-#############################################################
-NEWT_SOURCE=newt-0.51.0.tar.bz2
-NEWT_SITE=http://www.uclibc.org/
-NEWT_DIR=$(BUILD_DIR)/newt-0.51.0
-NEWT_VERSION=0.51.0
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-NEWT_CFLAGS=-Os -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-else
-NEWT_CFLAGS=-Os -g
-endif
-NEWT_CFLAGS+=-fPIC
-
-$(DL_DIR)/$(NEWT_SOURCE):
- $(WGET) -P $(DL_DIR) $(NEWT_SITE)/$(NEWT_SOURCE)
-
-$(NEWT_DIR)/.source: $(DL_DIR)/$(NEWT_SOURCE)
- bzcat $(DL_DIR)/$(NEWT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(NEWT_DIR)/.source;
-
-$(NEWT_DIR)/.configured: $(NEWT_DIR)/.source
- (cd $(NEWT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(NEWT_DIR)/.configured;
-
-$(NEWT_DIR)/libnewt.so.$(NEWT_VERSION): $(NEWT_DIR)/.configured
- $(MAKE) CFLAGS="$(NEWT_CFLAGS)" CC=$(TARGET_CC) -C $(NEWT_DIR)
- touch -c $(NEWT_DIR)/libnewt.so.$(NEWT_VERSION)
-
-$(STAGING_DIR)/lib/libnewt.a: $(NEWT_DIR)/libnewt.so.$(NEWT_VERSION)
- cp -a $(NEWT_DIR)/libnewt.a $(STAGING_DIR)/lib;
- cp -a $(NEWT_DIR)/newt.h $(STAGING_DIR)/include;
- cp -a $(NEWT_DIR)/libnewt.so* $(STAGING_DIR)/lib;
- (cd $(STAGING_DIR)/lib; ln -fs libnewt.so.$(NEWT_VERSION) libnewt.so);
- (cd $(STAGING_DIR)/lib; ln -fs libnewt.so.$(NEWT_VERSION) libnewt.so.0.51);
- touch -c $(STAGING_DIR)/lib/libnewt.a
-
-$(TARGET_DIR)/lib/libnewt.so.$(NEWT_VERSION): $(STAGING_DIR)/lib/libnewt.a
- cp -a $(STAGING_DIR)/lib/libnewt.so* $(TARGET_DIR)/lib;
- -$(STRIP) $(TARGET_DIR)/lib/libnewt.so*
- touch -c $(TARGET_DIR)/lib/libnewt.so.$(NEWT_VERSION)
-
-newt: uclibc slang $(TARGET_DIR)/lib/libnewt.so.$(NEWT_VERSION)
-
-newt-source: $(DL_DIR)/$(NEWT_SOURCE)
-
-newt-clean:
- rm -f $(TARGET_DIR)/lib/libnewt.so*
- -$(MAKE) -C $(NEWT_DIR) clean
-
-newt-dirclean: slang-dirclean
- rm -rf $(NEWT_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ntp
-#
-#############################################################
-NTP_SOURCE:=ntp-4.1.2.tar.gz
-NTP_SITE:=http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4
-NTP_DIR:=$(BUILD_DIR)/ntp-4.1.2
-NTP_CAT:=zcat
-NTP_BINARY:=ntpdate/ntpdate
-NTP_TARGET_BINARY:=usr/bin/ntpdate
-
-
-$(DL_DIR)/$(NTP_SOURCE):
- $(WGET) -P $(DL_DIR) $(NTP_SITE)/$(NTP_SOURCE)
-
-ntp-source: $(DL_DIR)/$(NTP_SOURCE)
-
-$(NTP_DIR)/.unpacked: $(DL_DIR)/$(NTP_SOURCE)
- $(NTP_CAT) $(DL_DIR)/$(NTP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SED) "s,^#if.*__GLIBC__.*_BSD_SOURCE.*$$,#if 0," \
- $(NTP_DIR)/ntpd/refclock_pcf.c;
- touch $(NTP_DIR)/.unpacked
-
-$(NTP_DIR)/.configured: $(NTP_DIR)/.unpacked
- (cd $(NTP_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --with-shared \
- --program-transform-name=s,,, \
- );
- touch $(NTP_DIR)/.configured
-
-$(NTP_DIR)/$(NTP_BINARY): $(NTP_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(NTP_DIR)
-
-$(TARGET_DIR)/$(NTP_TARGET_BINARY): $(NTP_DIR)/$(NTP_BINARY)
- install -m 755 $(NTP_DIR)/$(NTP_BINARY) $(TARGET_DIR)/$(NTP_TARGET_BINARY)
-
-ntp: uclibc $(TARGET_DIR)/$(NTP_TARGET_BINARY)
-
-ntp-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NTP_DIR) uninstall
- -$(MAKE) -C $(NTP_DIR) clean
-
-ntp-dirclean:
- rm -rf $(NTP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ntpclient
-#
-#############################################################
-NTPCLIENT_VERSION:=2003_194
-NTPCLIENT_SOURCE:=ntpclient_$(NTPCLIENT_VERSION).tar.gz
-NTPCLIENT_SITE:=http://doolittle.faludi.com/ntpclient
-NTPCLIENT_DIR:=$(BUILD_DIR)/ntpclient
-NTPCLIENT_IPK=$(BUILD_DIR)/ntpclient_$(NTPCLIENT_VERSION)-1_mipsel.ipk
-NTPCLIENT_IPK_DIR:=$(BUILD_DIR)/ntpclient-$(NTPCLIENT_VERSION)-ipk
-
-$(DL_DIR)/$(NTPCLIENT_SOURCE):
- $(WGET) -P $(DL_DIR) $(NTPCLIENT_SITE)/$(NTPCLIENT_SOURCE)
-
-ntpclient-source: $(DL_DIR)/$(NTPCLIENT_SOURCE)
-
-$(NTPCLIENT_DIR)/.unpacked: $(DL_DIR)/$(NTPCLIENT_SOURCE)
- tar -C $(BUILD_DIR) -zxf $(DL_DIR)/$(NTPCLIENT_SOURCE)
- touch $(NTPCLIENT_DIR)/.unpacked
-
-$(NTPCLIENT_DIR)/ntpclient: $(NTPCLIENT_DIR)/.unpacked
- CFLAGS="$(TARGET_CFLAGS)" $(MAKE) $(TARGET_CONFIGURE_OPTS) LD=$(TARGET_CC) -C $(NTPCLIENT_DIR)
-
-$(NTPCLIENT_IPK): $(NTPCLIENT_DIR)/ntpclient
- mkdir -p $(NTPCLIENT_IPK_DIR)/CONTROL $(NTPCLIENT_IPK_DIR)/usr/sbin
- install -m 644 $(OPENWRT_IPK_DIR)/ntpclient/CONTROL/control $(NTPCLIENT_IPK_DIR)/CONTROL
- install -m 755 $(NTPCLIENT_DIR)/ntpclient $(NTPCLIENT_IPK_DIR)/usr/sbin/
- $(STRIP) $(NTPCLIENT_IPK_DIR)/usr/sbin/ntpclient
- cd $(BUILD_DIR); $(IPKG_BUILD) $(NTPCLIENT_IPK_DIR)
-
-ntpclient-ipk : uclibc $(NTPCLIENT_IPK)
-
-ntpclient-clean:
- -$(MAKE) -C $(NTPCLIENT_DIR) clean
-
-ntpclient-dirclean:
- rm -rf $(NTPCLIENT_DIR) $(NTPCLIENT_IPK_DIR)
+++ /dev/null
-######################################################
-#
-# An example makefile to fetch a package from sources
-# then fetch the ipkg updates required to the base package
-# extract the archives into the build tree
-# and then build the source
-#
-######################################################
-
-
-# For this example we'll use a fairly simple package that compiles easily
-# and has sources available for download at sourceforge
-OIDENTD=oidentd-2.0.7
-OIDENTD_TARGET=oidentd
-OIDENTD_DIR=$(BUILD_DIR)/oidentd-2.0.7
-OIDENTD_IPKTARGET=oidentd-2.0.7_mipsel.ipk
-OIDENTD_SITE=http://easynews.dl.sourceforge.net/sourceforge/ojnk
-OIDENTD_SOURCE=oidentd-2.0.7.tar.gz
-OIDENTDIPK_SITE=http://openwrt.rozeware.bc.ca/ipkg-dev
-OIDENTDIPK_SRC=oidentd-2.0.7-pkg.tgz
-
-
-
-
-# define a target for the master makefile
-oidentd: $(OIDENTD_DIR)/$(OIDENTD_TARGET)
-
-oidentd-ipk: $(BUILD_DIR)/$(OIDENTD_IPKTARGET)
-
-# We need to download sources if we dont have them
-$(DL_DIR)/$(OIDENTD_SOURCE) :
- $(WGET) -P $(DL_DIR) $(OIDENTD_SITE)/$(OIDENTD_SOURCE)
-
-# As well as the upstream package sources, we need the updates
-# for ipkg packaging
-$(DL_DIR)/$(OIDENTDIPK_SRC) :
- $(WGET) -P $(DL_DIR) $(OIDENTDIPK_SITE)/$(OIDENTDIPK_SRC)
-
-# if we have the sources, they do no good unless they are unpacked
-$(OIDENTD_DIR)/.unpacked: $(DL_DIR)/$(OIDENTD_SOURCE)
- tar -C $(BUILD_DIR) -zxf $(DL_DIR)/$(OIDENTD_SOURCE)
- touch $(OIDENTD_DIR)/.unpacked
-
-# if we have the sources unpacked, we need to configure them
-$(OIDENTD_DIR)/.configured: $(OIDENTD_DIR)/.unpacked
- (cd $(OIDENTD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- );
- touch $(OIDENTD_DIR)/.configured
-
-
-# with the upstream sources unpacked, they still dont do much good without
-# the ipkg control and rule files
-$(OIDENTD_DIR)/ipkg/rules : $(DL_DIR)/$(OIDENTDIPK_SRC) $(OIDENTD_DIR)/.unpacked
- tar -C $(OIDENTD_DIR) -zxf $(DL_DIR)/$(OIDENTDIPK_SRC)
-
-# now that we have it all in place, just build it
-$(OIDENTD_DIR)/$(OIDENTD_TARGET): $(OIDENTD_DIR)/.configured
- cd $(OIDENTD_DIR); make
-
-
-$(BUILD_DIR)/$(OIDENTD_IPKTARGET): $(OIDENTD_DIR)/$(OIDENTD_TARGET) $(OIDENTD_DIR)/ipkg/rules
- (cd $(OIDENTD_DIR); $(IPKG_BUILDPACKAGE))
-
-
-
+++ /dev/null
-#############################################################
-#
-# openssh
-#
-#############################################################
-
-OPENSSH_SITE:=ftp://ftp.tux.org/bsd/openbsd/OpenSSH/portable/
-OPENSSH_DIR:=$(BUILD_DIR)/openssh-3.8p1
-OPENSSH_SOURCE:=openssh-3.8p1.tar.gz
-
-OPENSSH_IPK_DIR=$(OPENWRT_IPK_DIR)/openssh
-OPENSSH_IPK_BUILD_DIR:=$(BUILD_DIR)/openssh-3.8p1-ipk
-
-OPENSSH_SERVER_IPK:=$(BUILD_DIR)/openssh-server_3.8p1-1_mipsel.ipk
-OPENSSH_CLIENT_IPK:=$(BUILD_DIR)/openssh-client_3.8p1-1_mipsel.ipk
-OPENSSH_SFTP_SERVER_IPK:=$(BUILD_DIR)/openssh-sftp-server_3.8p1-1_mipsel.ipk
-OPENSSH_SFTP_CLIENT_IPK:=$(BUILD_DIR)/openssh-sftp-client_3.8p1-1_mipsel.ipk
-OPENSSH_CLIENT_EX_IPK:=$(BUILD_DIR)/openssh-client-extras_3.8p1-1_mipsel.ipk
-
-$(DL_DIR)/$(OPENSSH_SOURCE):
- $(WGET) -P $(DL_DIR) $(OPENSSH_SITE)/$(OPENSSH_SOURCE)
-
-$(OPENSSH_DIR)/.unpacked: $(DL_DIR)/$(OPENSSH_SOURCE) $(OPENSSH_PATCH)
- zcat $(DL_DIR)/$(OPENSSH_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(OPENSSH_IPK_DIR)/openssh.patch | patch -p1 -d $(OPENSSH_DIR)
- touch $(OPENSSH_DIR)/.unpacked
-
-$(OPENSSH_DIR)/.configured: $(OPENSSH_DIR)/.unpacked
- (cd $(OPENSSH_DIR); rm -rf config.cache; autoconf; \
- $(TARGET_CONFIGURE_OPTS) \
- LD=$(TARGET_CROSS)gcc \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/sbin \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --includedir=$(STAGING_DIR)/include \
- --disable-lastlog --disable-utmp \
- --disable-utmpx --disable-wtmp --disable-wtmpx \
- --without-x \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(OPENSSH_DIR)/.configured
-
-$(OPENSSH_DIR)/ssh: $(OPENSSH_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(OPENSSH_DIR)
- -$(STRIP) $(OPENSSH_DIR)/scp
- -$(STRIP) $(OPENSSH_DIR)/sftp
- -$(STRIP) $(OPENSSH_DIR)/sftp-server
- -$(STRIP) $(OPENSSH_DIR)/ssh
- -$(STRIP) $(OPENSSH_DIR)/ssh-add
- -$(STRIP) $(OPENSSH_DIR)/ssh-agent
- -$(STRIP) $(OPENSSH_DIR)/ssh-keygen
- -$(STRIP) $(OPENSSH_DIR)/ssh-keyscan
- -$(STRIP) $(OPENSSH_DIR)/ssh-keysign
- -$(STRIP) $(OPENSSH_DIR)/ssh-rand-helper
- -$(STRIP) $(OPENSSH_DIR)/sshd
-
-$(TARGET_DIR)/usr/bin/ssh: $(OPENSSH_DIR)/ssh
- $(MAKE) CC=$(TARGET_CC) DESTDIR=$(TARGET_DIR) -C $(OPENSSH_DIR) install
- mkdir -p $(TARGET_DIR)/etc/init.d/
- cp $(OPENSSH_DIR)/S50sshd $(TARGET_DIR)/etc/init.d/
- chmod a+x $(TARGET_DIR)/etc/init.d/S50sshd
- rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # since this is the embedded build, keep things to minimum
- rm $(TARGET_DIR)/etc/moduli
- rm $(TARGET_DIR)/usr/bin/sftp
- rm $(TARGET_DIR)/usr/bin/ssh-add
- rm $(TARGET_DIR)/usr/bin/ssh-agent
- rm $(TARGET_DIR)/usr/bin/ssh-keyscan
- rm $(TARGET_DIR)/usr/sbin/sftp-server
- rm $(TARGET_DIR)/usr/sbin/ssh-keysign
-
-openssh: $(TARGET_DIR)/usr/bin/ssh
-
-$(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh: $(OPENSSH_DIR)/ssh
- $(MAKE) CC=$(TARGET_CC) DESTDIR=$(OPENSSH_IPK_BUILD_DIR) -C $(OPENSSH_DIR) install
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/etc/init.d/
- cp $(OPENSSH_DIR)/S50sshd $(OPENSSH_IPK_BUILD_DIR)/etc/init.d/
- chmod a+x $(OPENSSH_IPK_BUILD_DIR)/etc/init.d/S50sshd
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/usr/info $(OPENSSH_IPK_BUILD_DIR)/usr/man $(OPENSSH_IPK_BUILD_DIR)/usr/share/doc
-
-$(OPENSSH_SERVER_IPK): $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL
- cp $(OPENSSH_IPK_DIR)/openssh.server.control $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/control
- cp $(OPENSSH_IPK_DIR)/openssh.server.conffiles $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/conffiles
- cp $(OPENSSH_IPK_DIR)/openssh.server.preinst $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/preinst
- chmod a+x $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/preinst
- cp $(OPENSSH_IPK_DIR)/openssh.server.postinst $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/postinst
- chmod a+x $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/postinst
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/etc/init.d
- cp $(OPENSSH_IPK_DIR)/openssh.server.sshd_config $(OPENSSH_IPK_BUILD_DIR)/build/etc/sshd_config
- cp $(OPENSSH_IPK_DIR)/openssh.server.S50sshd-ipk $(OPENSSH_IPK_BUILD_DIR)/build/etc/init.d/S50sshd
- chmod a+x $(OPENSSH_IPK_BUILD_DIR)/build/etc/init.d/S50sshd
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/sbin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/sbin/sshd $(OPENSSH_IPK_BUILD_DIR)/build/usr/sbin
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh-keygen $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENSSH_IPK_BUILD_DIR)/build
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
-
-$(OPENSSH_CLIENT_IPK): $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL
- cp $(OPENSSH_IPK_DIR)/openssh.client.control $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/control
- cp $(OPENSSH_IPK_DIR)/openssh.client.conffiles $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/conffiles
- cp $(OPENSSH_IPK_DIR)/openssh.client.preinst $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/preinst
- chmod a+x $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/preinst
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/etc
- cp $(OPENSSH_IPK_DIR)/openssh.client.ssh_config $(OPENSSH_IPK_BUILD_DIR)/build/etc/ssh_config
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/scp $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENSSH_IPK_BUILD_DIR)/build
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
-
-$(OPENSSH_SFTP_SERVER_IPK): $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL
- cp $(OPENSSH_IPK_DIR)/openssh.sftp-server.control $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/control
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/sbin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/sbin/sftp-server $(OPENSSH_IPK_BUILD_DIR)/build/usr/sbin
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENSSH_IPK_BUILD_DIR)/build
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
-
-$(OPENSSH_SFTP_CLIENT_IPK): $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL
- cp $(OPENSSH_IPK_DIR)/openssh.sftp-client.control $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/control
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/sftp $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENSSH_IPK_BUILD_DIR)/build
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
-
-$(OPENSSH_CLIENT_EX_IPK): $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL
- cp $(OPENSSH_IPK_DIR)/openssh.client.ex.control $(OPENSSH_IPK_BUILD_DIR)/build/CONTROL/control
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh-add $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh-agent $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/bin/ssh-keyscan $(OPENSSH_IPK_BUILD_DIR)/build/usr/bin
- mkdir -p $(OPENSSH_IPK_BUILD_DIR)/build/usr/sbin
- cp $(OPENSSH_IPK_BUILD_DIR)/usr/sbin/ssh-keysign $(OPENSSH_IPK_BUILD_DIR)/build/usr/sbin
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENSSH_IPK_BUILD_DIR)/build
- rm -rf $(OPENSSH_IPK_BUILD_DIR)/build
-
-openssh-ipk: $(OPENSSH_SERVER_IPK) $(OPENSSH_CLIENT_IPK) \
- $(OPENSSH_SFTP_SERVER_IPK) $(OPENSSH_SFTP_CLIENT_IPK) \
- $(OPENSSH_CLIENT_EX_IPK)
-
-openssh-source: $(DL_DIR)/$(OPENSSH_SOURCE)
-
-openssh-clean:
- $(MAKE) -C $(OPENSSH_DIR) clean
-
-openssh-dirclean:
- rm -rf $(OPENSSH_DIR)
-
+++ /dev/null
-#############################################################
-#
-# openssl
-#
-#############################################################
-
-# TARGETS
-OPENSSL_SITE:=http://www.openssl.org/source
-OPENSSL_SOURCE:=openssl-0.9.7d.tar.gz
-OPENSSL_DIR:=$(BUILD_DIR)/openssl-0.9.7d
-OPENSSL_IPK_DIR=$(OPENWRT_IPK_DIR)/openssl
-OPENSSL_PATCH=$(OPENSSL_IPK_DIR)/openssl.patch
-
-OPENSSL_IPK_BUILD_DIR=$(BUILD_DIR)/openssl-0.9.7d-ipk
-LIBSSL_IPK=$(BUILD_DIR)/libssl_0.9.7d_mipsel.ipk
-
-$(DL_DIR)/$(OPENSSL_SOURCE):
- $(WGET) -P $(DL_DIR) $(OPENSSL_SITE)/$(OPENSSL_SOURCE)
-
-$(OPENSSL_DIR)/.unpacked: $(DL_DIR)/$(OPENSSL_SOURCE) $(OPENSSL_PATCH)
- gunzip -c $(DL_DIR)/$(OPENSSL_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(OPENSSL_PATCH) | patch -p1 -d $(OPENSSL_DIR)
- # sigh... we have to resort to this just to set a gcc flag.
- $(SED) 's,/CFLAG=,/CFLAG= $(TARGET_SOFT_FLOAT) ,g' \
- $(OPENSSL_DIR)/Configure
- touch $(OPENSSL_DIR)/.unpacked
-
-$(OPENSSL_DIR)/Makefile: $(OPENSSL_DIR)/.unpacked
- (cd $(OPENSSL_DIR); \
- CFLAGS="-DOPENSSL_NO_KRB5 -DOPENSSL_NO_IDEA -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC5" \
- PATH=$(TARGET_PATH) ./Configure linux-$(ARCH) --prefix=/ \
- --openssldir=/usr/lib/ssl -L$(STAGING_DIR)/lib -ldl \
- -I$(STAGING_DIR)/include $(OPENSSL_OPTS) no-threads \
- shared no-idea no-mdc2 no-rc5)
-
-$(OPENSSL_DIR)/apps/openssl: $(OPENSSL_DIR)/Makefile
- $(MAKE) CC=$(TARGET_CC) -C $(OPENSSL_DIR) all build-shared
- # Work around openssl build bug to link libssl.so with libcrypto.so.
- -rm $(OPENSSL_DIR)/libssl.so.*.*.*
- $(MAKE) CC=$(TARGET_CC) -C $(OPENSSL_DIR) do_linux-shared
-
-$(STAGING_DIR)/lib/libcrypto.a: $(OPENSSL_DIR)/apps/openssl
- $(MAKE) CC=$(TARGET_CC) INSTALL_PREFIX=$(STAGING_DIR) -C $(OPENSSL_DIR) install
- cp -fa $(OPENSSL_DIR)/libcrypto.so* $(STAGING_DIR)/lib/
- chmod a-x $(STAGING_DIR)/lib/libcrypto.so.0.9.7
- (cd $(STAGING_DIR)/lib; ln -fs libcrypto.so.0.9.7 libcrypto.so)
- (cd $(STAGING_DIR)/lib; ln -fs libcrypto.so.0.9.7 libcrypto.so.0)
- cp -fa $(OPENSSL_DIR)/libssl.so* $(STAGING_DIR)/lib/
- chmod a-x $(STAGING_DIR)/lib/libssl.so.0.9.7
- (cd $(STAGING_DIR)/lib; ln -fs libssl.so.0.9.7 libssl.so)
- (cd $(STAGING_DIR)/lib; ln -fs libssl.so.0.9.7 libssl.so.0)
-
-$(TARGET_DIR)/usr/lib/libcrypto.so.0.9.7: $(STAGING_DIR)/lib/libcrypto.a
- mkdir -p $(TARGET_DIR)/usr/lib
- cp -fa $(STAGING_DIR)/lib/libcrypto.so* $(TARGET_DIR)/usr/lib/
- cp -fa $(STAGING_DIR)/lib/libssl.so* $(TARGET_DIR)/usr/lib/
- #cp -fa $(STAGING_DIR)/bin/openssl $(TARGET_DIR)/bin/
- -$(STRIP) $(TARGET_DIR)/usr/lib/libssl.so.0.9.7
- -$(STRIP) $(TARGET_DIR)/usr/lib/libcrypto.so.0.9.7
-
-$(TARGET_DIR)/usr/lib/libssl.a: $(STAGING_DIR)/lib/libcrypto.a
- mkdir -p $(TARGET_DIR)/usr/include
- cp -a $(STAGING_DIR)/include/openssl $(TARGET_DIR)/usr/include/
- cp -dpf $(STAGING_DIR)/lib/libssl.a $(TARGET_DIR)/usr/lib/
- cp -dpf $(STAGING_DIR)/lib/libcrypto.a $(TARGET_DIR)/usr/lib/
- touch -c $(TARGET_DIR)/usr/lib/libssl.a
-
-openssl-headers: $(TARGET_DIR)/usr/lib/libssl.a
-
-openssl: uclibc $(TARGET_DIR)/usr/lib/libcrypto.so.0.9.7
-
-$(LIBSSL_IPK): uclibc $(STAGING_DIR)/lib/libcrypto.a
- mkdir -p $(OPENSSL_IPK_BUILD_DIR)/CONTROL
- cp $(OPENSSL_IPK_DIR)/control $(OPENSSL_IPK_BUILD_DIR)/CONTROL/control
- mkdir -p $(OPENSSL_IPK_BUILD_DIR)/usr/lib
- cp -fa $(STAGING_DIR)/lib/libcrypto.so* $(OPENSSL_IPK_BUILD_DIR)/usr/lib/
- cp -fa $(STAGING_DIR)/lib/libssl.so* $(OPENSSL_IPK_BUILD_DIR)/usr/lib/
- -$(STRIP) $(OPENSSL_IPK_BUILD_DIR)/usr/lib/libssl.so.0.9.7
- -$(STRIP) $(OPENSSL_IPK_BUILD_DIR)/usr/lib/libcrypto.so.0.9.7
- cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENSSL_IPK_BUILD_DIR)
-
-openssl-ipk: $(LIBSSL_IPK)
-
-openssl-source: $(DL_DIR)/$(OPENSSL_SOURCE)
-
-openssl-clean:
- rm -f $(STAGING_DIR)/bin/openssl $(TARGET_DIR)/bin/openssl
- rm -f $(STAGING_DIR)/lib/libcrypto.so* $(TARGET_DIR)/lib/libcrypto.so*
- rm -f $(STAGING_DIR)/lib/libssl.so* $(TARGET_DIR)/lib/libssl.so*
- rm -rf $(OPENSSL_IPK_BUILD_DIR)
- $(MAKE) -C $(OPENSSL_DIR) clean
-
-openssl-dirclean:
- rm -rf $(OPENSSL_DIR)
-
+++ /dev/null
-#############################################################
-#
-# openvpn
-#
-# NOTE: Uses start-stop-daemon in init script, so be sure
-# to enable that within busybox
-#
-#############################################################
-OPENVPN_SOURCE:=openvpn-1.5.0.tar.gz
-OPENVPN_SITE:=http://aleron.dl.sourceforge.net/sourceforge/openvpn/
-OPENVPN_DIR:=$(BUILD_DIR)/openvpn-1.5.0
-OPENVPN_CAT:=zcat
-OPENVPN_BINARY:=openvpn
-OPENVPN_TARGET_BINARY:=usr/sbin/openvpn
-#OPENVPN_PATCH:=$(SOURCE_DIR)/openvpn.patch
-
-$(DL_DIR)/$(OPENVPN_SOURCE):
- $(WGET) -P $(DL_DIR) $(OPENVPN_SITE)/$(OPENVPN_SOURCE)
-
-openvpn-source: $(DL_DIR)/$(OPENVPN_SOURCE)
-
-$(OPENVPN_DIR)/.unpacked: $(DL_DIR)/$(OPENVPN_SOURCE)
- $(OPENVPN_CAT) $(DL_DIR)/$(OPENVPN_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #cat $(OPENVPN_PATCH) | patch -p1 -d $(OPENVPN_DIR)
- touch $(OPENVPN_DIR)/.unpacked
-
-$(OPENVPN_DIR)/.configured: $(OPENVPN_DIR)/.unpacked
- (cd $(OPENVPN_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --program-prefix="" \
- --enable-pthread \
- );
- touch $(OPENVPN_DIR)/.configured
-
-$(OPENVPN_DIR)/$(OPENVPN_BINARY): $(OPENVPN_DIR)/.configured
- $(MAKE) -C $(OPENVPN_DIR)
-
-$(TARGET_DIR)/$(OPENVPN_TARGET_BINARY): $(OPENVPN_DIR)/$(OPENVPN_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(OPENVPN_DIR) install
- mkdir -p $(TARGET_DIR)/etc/openvpn
- cp $(SOURCE_DIR)/openvpn $(TARGET_DIR)/etc/init.d/openvpn
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-openvpn: uclibc lzo openssl $(TARGET_DIR)/$(OPENVPN_TARGET_BINARY)
-
-openvpn-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(OPENVPN_DIR) uninstall
- -$(MAKE) -C $(OPENVPN_DIR) clean
-
-openvpn-dirclean:
- rm -rf $(OPENVPN_DIR)
-
+++ /dev/null
-# Makefile for to build the base openwrt
-#
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-######################################################################
-#
-# WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!
-#
-# Currently the dependencies are not all handled. But that's true of
-# our buildroot in general, since it wasn't really set up for end users.
-
-OPENWRT_TARGETS:= $(STAGING_DIR)/bin/sstrip gcc3_3 openwrt-linux openwrt-kmodules.tar.bz2 \
- openwrt-shared openwrt-mtd openwrt-nvram openwrt-wlconf \
- bridge dnsmasq1 iptables wtools busybox \
- openwrt-rootprep
-
-.PHONY: $(OPENWRT_TARGETS) openwrt-code.bin
-
-openwrt-base: $(OPENWRT_TARGETS)
-
-######################################################################
-
-WRT54G_SOURCE=wrt54gs.2.07.1.tgz
-WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1
-WRT54G_DIR=$(BUILD_DIR)/WRT54GS
-
-LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux
-LINUX_FORMAT=zImage
-LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz
-
-TARGET_MODULES_DIR:=$(TARGET_DIR)/lib/modules/2.4.20
-
-$(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared
- -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
- touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared
- $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR)/openwrt/kernel/patches
- # use replacement diag module code
- cp -f $(SOURCE_DIR)/openwrt/kernel/diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
- cp -f $(SOURCE_DIR)/openwrt/kernel/linux.config $(LINUX_DIR)/.config
- -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
- -(cd $(LINUX_DIR)/arch/mips/brcm-boards/bcm947xx/; \
- rm -rf compressed; \
- tar jxvf $(SOURCE_DIR)/openwrt/kernel/compressed-20040531.tar.bz2; \
- )
- touch $(LINUX_DIR)/.patched
-
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.nf-patched $(LINUX_DIR)/.patched $(LINUX_DIR)/.bbc-patched
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile
- $(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile
- make -C $(LINUX_DIR) oldconfig include/linux/version.h
- touch $(LINUX_DIR)/.configured
-
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured $(GCC_BUILD_DIR2)/.installed
- $(MAKE) -C $(LINUX_DIR) dep
- touch $(LINUX_DIR)/.depend_done
-
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
- $(MAKE) -C $(LINUX_DIR) $(LINUX_FORMAT)
-
-openwrt-kmodules.tar.bz2: $(LINUX_DIR)/$(LINUX_BINLOC)
- $(MAKE) -C $(LINUX_DIR) modules
- $(MAKE) -C $(LINUX_DIR) DEPMOD=true \
- INSTALL_MOD_PATH=$(LINUX_DIR)/modules modules_install
- tar -C $(LINUX_DIR)/modules/lib -cjf openwrt-kmodules.tar.bz2 modules
-
-openwrt-linux: $(LINUX_DIR)/$(LINUX_BINLOC)
-
-$(DL_DIR)/$(WRT54G_SOURCE):
- $(WGET) -P $(DL_DIR) $(WRT54G_SITE)/$(WRT54G_SOURCE)
-
-$(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE)
- zcat $(DL_DIR)/$(WRT54G_SOURCE) | tar -C $(BUILD_DIR) -xvf - WRT54GS/README.TXT WRT54GS/release
- touch $(WRT54G_DIR)/.source
-
-$(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source
- $(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR)/openwrt/patches
- touch $(WRT54G_DIR)/.prepared
-
-######################################################################
-
-OPENWRT_ROOT_SKEL:=root.tar.gz
-OPENWRT_SITE=http://openwrt.ksilebo.net/cgi-bin/viewcvs.cgi/root
-
-$(DL_DIR)/$(OPENWRT_ROOT_SKEL):
- $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_ROOT_SKEL)
-
-######################################################################
-
-OPENWRT_SRCBASE:=$(WRT54G_DIR)/release/src
-OPENWRT_SHARED_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/shared
-OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so
-
-$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(WRT54G_DIR)/.source
- $(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) -f Makefile-openwrt \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \
- install
-
-openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY)
-
-openwrt-shared-clean:
- -$(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_NVRAM_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/nvram
-OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram
-
-$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(WRT54G_DIR)/.source
- $(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -DOPENWRT_NVRAM" \
- install
-
-
-openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY)
-
-openwrt-nvram-clean:
- -$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_MTD_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/rc
-OPENWRT_MTD_TARGET_BINARY:=sbin/mtd
-
-$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): $(WRT54G_DIR)/.source $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) # need libnvram
- $(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) -f Makefile-openwrt \
- TOP=$(OPENWRT_SRCBASE)/router \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \
- install
-
-openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
-
-openwrt-mtd-clean:
- -$(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_WLCONF_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/wlconf
-OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
-
-$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(WRT54G_DIR)/.source
- $(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) \
- TOP=$(OPENWRT_SRCBASE)/router \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall" \
- install
-
-
-openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY)
-
-openwrt-wlconf-clean:
- -$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean
-
-######################################################################
-
-openwrt-rootprep:
- # tmp
- mkdir -p $(TARGET_DIR)/tmp
- chmod a+rwxt $(TARGET_DIR)/tmp
- ln -sf /tmp $(TARGET_DIR)/var
- rm -f $(TARGET_DIR)/usr/tmp
- ln -sf ../tmp $(TARGET_DIR)/usr/tmp
- # dev
- mkdir -p $(TARGET_DIR)/dev
- # etc
- mkdir -p $(TARGET_DIR)/etc
- ln -sf /tmp/resolv.conf $(TARGET_DIR)/etc/resolv.conf
- # miscellaneous
- mkdir -p $(TARGET_DIR)/mnt
- mkdir -p $(TARGET_DIR)/proc
- mkdir -p $(TARGET_DIR)/jffs
- mkdir -p $(TARGET_DIR)/rom
- # modules
- mkdir -p $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/wl/wl.o $(TARGET_MODULES_DIR)
- #cp $(LINUX_DIR)/drivers/net/et.4702/et.4702.o $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/et/et.o $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/diag/diag.o $(TARGET_MODULES_DIR)
-
-######################################################################
-
-openwrt-prune: openwrt-base
- # remove unneeded uClibc libs
- rm -rf $(TARGET_DIR)/lib/libthread_db*
- rm -rf $(TARGET_DIR)/lib/libpthread*
- # remove unneeded uClibc utils
- rm -f $(TARGET_DIR)/sbin/ldconfig
- rm -f $(TARGET_DIR)/usr/bin/ldd
- # remove other unneeded files
- rm -f $(TARGET_DIR)/usr/sbin/iptables-save
- rm -f $(TARGET_DIR)/usr/sbin/iptables-restore
- rm -f $(TARGET_DIR)/usr/sbin/ip6tables
- rm -f $(TARGET_DIR)/usr/lib/iptables/libip6*
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STAGING_DIR)/bin/sstrip 2>/dev/null || true;
-
-######################################################################
-
-$(STAGING_DIR)/bin/sstrip:
- $(CC) -o $(STAGING_DIR)/bin/sstrip $(SOURCE_DIR)/openwrt/tools/sstrip.c
-
-wrt-tools:
- $(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/openwrt/tools/trx.c
- $(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/openwrt/tools/addpattern.c
-
-openwrt-linux.trx: openwrt-prune squashfsroot wrt-tools
- $(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \
- $(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE)
-
-openwrt-gs-code.bin: openwrt-linux.trx
- $(WRT54G_DIR)/release/tools/addpattern -i openwrt-linux.trx \
- -o openwrt-gs-code.bin -g
-
-openwrt-g-code.bin: openwrt-gs-code.bin
- sed -e "1s,^W54S,W54G," < openwrt-gs-code.bin > openwrt-g-code.bin
-
-openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin
-
-######################################################################
+++ /dev/null
-#############################################################
-#
-# patch
-#
-#############################################################
-GNUPATCH_SOURCE:=patch_2.5.9.orig.tar.gz
-GNUPATCH_SITE:=http://ftp.debian.org/debian/pool/main/p/patch
-GNUPATCH_CAT:=zcat
-GNUPATCH_DIR:=$(BUILD_DIR)/patch-2.5.9
-GNUPATCH_BINARY:=patch
-GNUPATCH_TARGET_BINARY:=usr/bin/patch
-
-$(DL_DIR)/$(GNUPATCH_SOURCE):
- $(WGET) -P $(DL_DIR) $(GNUPATCH_SITE)/$(GNUPATCH_SOURCE)
-
-patch-source: $(DL_DIR)/$(GNUPATCH_SOURCE)
-
-$(GNUPATCH_DIR)/.unpacked: $(DL_DIR)/$(GNUPATCH_SOURCE)
- $(GNUPATCH_CAT) $(DL_DIR)/$(GNUPATCH_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GNUPATCH_DIR)/.unpacked
-
-$(GNUPATCH_DIR)/.configured: $(GNUPATCH_DIR)/.unpacked
- (cd $(GNUPATCH_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(GNUPATCH_DIR)/.configured
-
-$(GNUPATCH_DIR)/$(GNUPATCH_BINARY): $(GNUPATCH_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GNUPATCH_DIR)
-
-$(TARGET_DIR)/$(GNUPATCH_TARGET_BINARY): $(GNUPATCH_DIR)/$(GNUPATCH_BINARY)
- rm -f $(TARGET_DIR)/$(GNUPATCH_TARGET_BINARY)
- cp -a $(GNUPATCH_DIR)/$(GNUPATCH_BINARY) $(TARGET_DIR)/$(GNUPATCH_TARGET_BINARY)
-
-patch: uclibc $(TARGET_DIR)/$(GNUPATCH_TARGET_BINARY)
-
-patch-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GNUPATCH_DIR) uninstall
- -$(MAKE) -C $(GNUPATCH_DIR) clean
-
-patch-dirclean:
- rm -rf $(GNUPATCH_DIR)
-
+++ /dev/null
-#############################################################
-#
-# pciutils
-#
-#############################################################
-PCIUTILS_SOURCE:=pciutils-2.1.10.tar.gz
-PCIUTILS_SITE:=ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci
-PCIUTILS_DIR:=$(BUILD_DIR)/pciutils-2.1.10
-PCIUTILS_CAT:=zcat
-
-# Yet more targets...
-PCIIDS_SITE:=http://pciids.sourceforge.net/
-PCIIDS_SOURCE:=pci.ids.bz2
-PCIIDS_CAT:=bzcat
-
-$(DL_DIR)/$(PCIUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(PCIUTILS_SITE)/$(PCIUTILS_SOURCE)
-
-$(DL_DIR)/$(PCIIDS_SOURCE):
- $(WGET) -P $(DL_DIR) $(PCIIDS_SITE)/$(PCIIDS_SOURCE)
-
-pciutils-source: $(DL_DIR)/$(PCIUTILS_SOURCE) $(DL_DIR)/$(PCIIDS_SOURCE)
-
-$(PCIUTILS_DIR)/.unpacked: $(DL_DIR)/$(PCIUTILS_SOURCE) $(DL_DIR)/$(PCIIDS_SOURCE)
- $(PCIUTILS_CAT) $(DL_DIR)/$(PCIUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(PCIIDS_CAT) $(DL_DIR)/$(PCIIDS_SOURCE) > $(PCIUTILS_DIR)/pci.id
- touch $(PCIUTILS_DIR)/.unpacked
-
-$(PCIUTILS_DIR)/.configured: $(PCIUTILS_DIR)/.unpacked
- (cd $(PCIUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(PCIUTILS_DIR)/.configured
-
-$(PCIUTILS_DIR)/lspci: $(PCIUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(PCIUTILS_DIR)
-
-$(TARGET_DIR)/sbin/lspci: $(PCIUTILS_DIR)/lspci
- install -c $(PCIUTILS_DIR)/lspci $(TARGET_DIR)/sbin/lspci
-
-$(TARGET_DIR)/sbin/setpci: $(PCIUTILS_DIR)/setpci
- install -c $(PCIUTILS_DIR)/setpci $(TARGET_DIR)/sbin/setpci
-
-$(TARGET_DIR)/usr/share/misc/pci.ids: $(PCIUTILS_DIR)/.dist
- install -Dc $(PCIUTILS_DIR)/pci.ids $(TARGET_DIR)/usr/share/misc/pci.ids
-
-
-pciutils: uclibc $(TARGET_DIR)/sbin/setpci $(TARGET_DIR)/sbin/lspci $(TARGET_DIR)/usr/share/misc/pci.ids
-
-pciutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(PCIUTILS_DIR) uninstall
- -$(MAKE) -C $(PCIUTILS_DIR) clean
-
-pciutils-dirclean:
- rm -rf $(PCIUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# pcmcia card services
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-PCMCIA_SOURCE:=pcmcia-cs-3.2.7.tar.gz
-PCMCIA_SITE:=http://aleron.dl.sourceforge.net/sourceforge/pcmcia-cs
-PCMCIA_DIR:=$(BUILD_DIR)/pcmcia-cs-3.2.7
-PCMCIA_PATCH:=$(SOURCE_DIR)/pcmcia.patch
-PCMCIA_CAT:=zcat
-
-$(DL_DIR)/$(PCMCIA_SOURCE):
- $(WGET) -P $(DL_DIR) $(PCMCIA_SITE)/$(PCMCIA_SOURCE)
-
-pcmcia-source: $(DL_DIR)/$(PCMCIA_SOURCE)
-
-$(PCMCIA_DIR)/.unpacked: $(DL_DIR)/$(PCMCIA_SOURCE)
- $(PCMCIA_CAT) $(DL_DIR)/$(PCMCIA_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(PCMCIA_DIR)/.unpacked
-
-$(PCMCIA_DIR)/.patched: $(PCMCIA_DIR)/.unpacked
- cat $(PCMCIA_PATCH) | patch -d $(PCMCIA_DIR) -p1
- touch $(PCMCIA_DIR)/.patched
-
-$(PCMCIA_DIR)/.configured: $(PCMCIA_DIR)/.patched
- ( cd $(PCMCIA_DIR) ; ./Configure --kernel=$(LINUX_SOURCE_DIR) --noprompt \
- --rcdir=/etc --arch=$(ARCH) --trust --srctree --nocardbus \
- --sysv --kcc=$(KERNEL_CROSS)gcc --ucc=$(TARGET_CC) --ld=$(TARGET_CROSS)ld \
- --target=$(TARGET_DIR))
- $(SED) "s/pump/udhcpc/" $(PCMCIA_DIR)/etc/network
- $(SED) "s/ide_cs/ide-cs/" $(PCMCIA_DIR)/etc/config
- $(SED) "s/bind \"wvlan_cs\"/bind \"orinoco_cs\"/g" $(PCMCIA_DIR)/etc/config
- touch $(PCMCIA_DIR)/.configured
-
-$(PCMCIA_DIR)/cardmgr/cardmgr: $(PCMCIA_DIR)/.configured
- $(MAKE) -C $(PCMCIA_DIR) -i all
- -A=`find $(PCMCIA_DIR) -type f -perm +111` ; \
- for fo in $$A; do \
- file $$fo | grep "ELF" | grep "executable" > /dev/null 2>&1; \
- if [ $$? = 0 ] ; then \
- $(STRIP) $$fo; \
- fi; \
- done
- touch -c $(PCMCIA_DIR)/cardmgr/cardmgr
-
-$(TARGET_DIR)/sbin/cardmgr: $(PCMCIA_DIR)/cardmgr/cardmgr
- rm -rf $(TARGET_DIR)/etc/pcmcia;
- $(MAKE) -i -C $(PCMCIA_DIR) install
- rm -rf $(TARGET_DIR)/usr/man;
- rm -rf $(TARGET_DIR)/usr/share/man;
- rm -rf $(TARGET_DIR)/usr/X11R6/man;
- rm -rf $(TARGET_DIR)/etc/rc.d;
- rm -rf $(TARGET_DIR)/etc/rc?.d;
- rm -f $(TARGET_DIR)/etc/init.d/pcmcia*;
- rm -f $(TARGET_DIR)/sbin/dump_cis $(TARGET_DIR)/sbin/pack_cis
- rm -f $(TARGET_DIR)/usr/share/pnp.ids $(TARGET_DIR)/sbin/lspnp $(TARGET_DIR)/sbin/setpnp;
- rm -f $(TARGET_DIR)/sbin/pcinitrd
- rm -f $(TARGET_DIR)/sbin/probe
- rm -f $(TARGET_DIR)/sbin/ide_info
- rm -f $(TARGET_DIR)/sbin/scsi_info
- rm -f $(TARGET_DIR)/sbin/ftl_check
- rm -f $(TARGET_DIR)/sbin/ftl_format
- rm -f $(TARGET_DIR)/usr/X11R6/bin/xcardinfo
- rm -rf $(TARGET_DIR)/etc/sysconfig
- mkdir -p $(TARGET_DIR)/etc/default
- cp -f $(PCMCIA_DIR)/etc/pcmcia $(TARGET_DIR)/etc/default/
- cp -f $(PCMCIA_DIR)/etc/rc.pcmcia $(TARGET_DIR)/etc/init.d/S30pcmcia
- rm -rf $(TARGET_DIR)/etc/pcmcia/cis
- chmod a+x $(TARGET_DIR)/etc/init.d/S30pcmcia
- chmod -R u+w $(TARGET_DIR)/etc/pcmcia/*
-
-# use busybox depmod.pl so we need the sources unpacked
-$(PCMCIA_DIR)/.modules.dep: $(BUSYBOX_DIR)/.configured $(TARGET_DIR)/lib/modules
- [ -d $(TARGET_DIR)/lib/modules/$(LINUX_VERSION) ] && \
- $(BUSYBOX_DIR)/examples/depmod.pl \
- -b $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/ \
- -k $(LINUX_DIR)/vmlinux \
- -F $(LINUX_DIR)/System.map \
- > $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep
- touch $(PCMCIA_DIR)/.modules.dep
-
-pcmcia: uclibc $(TARGET_DIR)/sbin/cardmgr $(PCMCIA_DIR)/.modules.dep
-
-pcmcia-clean:
- rm -f $(TARGET_DIR)/sbin/cardmgr
- -$(MAKE) -C $(PCMCIA_DIR) clean
- rm -f $(PCMCIA_DIR)/.configured $(PCMCIA_DIR)/config.out
-
-pcmcia-dirclean:
- rm -rf $(PCMCIA_DIR)
+++ /dev/null
-## ppp & ppp-radius-plugin
-
-PPP_VERSION := 2.4.2
-PPP_RELEASE := 1
-
-PPP_SOURCE:=ppp-$(PPP_VERSION).tar.gz
-PPP_SITE:=ftp://ftp.samba.org/pub/ppp
-PPP_DIR:=$(BUILD_DIR)/ppp-$(PPP_VERSION)
-PPP_CAT:=zcat
-
-PPP_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/ppp
-
-PPP_BUILD_DIR := $(BUILD_DIR)/ppp_$(PPP_VERSION)-$(PPP_RELEASE)
-PPP_IPK_DIR := $(OPENWRT_IPK_DIR)/ppp
-PPP_IPK := $(PPP_BUILD_DIR)_$(ARCH).ipk
-
-PPP_RADIUS_PLUGIN_BUILD_DIR := $(BUILD_DIR)/ppp-radius-plugin_$(PPP_VERSION)-$(PPP_RELEASE)
-PPP_RADIUS_PLUGIN_IPK_DIR := $(OPENWRT_IPK_DIR)/ppp-radius-plugin
-PPP_RADIUS_PLUGIN_IPK := $(PPP_RADIUS_PLUGIN_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(PPP_SOURCE):
- $(WGET) -P $(DL_DIR) $(PPP_SITE)/$(PPP_SOURCE)
-
-
-$(PPP_DIR)/.stamp-unpacked: $(DL_DIR)/$(PPP_SOURCE)
- $(PPP_CAT) $(DL_DIR)/$(PPP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(PPP_DIR)/.stamp-unpacked
-
-
-$(PPP_DIR)/.stamp-patched: $(PPP_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(PPP_DIR) $(PPP_PATCH_DIR)
-
- touch $(PPP_DIR)/.stamp-patched
-
-
-$(PPP_DIR)/.stamp-configured: $(PPP_DIR)/.stamp-patched
- cd $(PPP_DIR)/pppd/plugins/radius/radiusclient ; \
- rm -rf config.cache ; \
- echo > aclocal.m4; \
- $(TARGET_CONFIGURE_OPTS) \
- ac_cv_func_setvbuf_reversed=no \
- ac_cv_func_uname=no \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- $(DISABLE_NLS) \
- --disable-shared \
- --enable-static \
-
- cd $(PPP_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- --sysconfdir=/etc \
- $(DISABLE_NLS) \
-
- touch $(PPP_DIR)/.stamp-configured
-
-
-$(PPP_DIR)/.stamp-built: $(PPP_DIR)/.stamp-configured
- cd $(PPP_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- COPTS="$(TARGET_CFLAGS)" \
- all
-
- touch $(PPP_DIR)/.stamp-built
-
-
-$(PPP_BUILD_DIR)/CONTROL/control: $(PPP_DIR)/.stamp-built
- rm -rf $(PPP_BUILD_DIR)
- mkdir -p $(PPP_BUILD_DIR)/usr/sbin
- cp -a $(PPP_DIR)/pppd/pppd $(PPP_BUILD_DIR)/usr/sbin/
- $(STRIP) $(PPP_BUILD_DIR)/usr/sbin/*
- cp -a $(PPP_IPK_DIR)/root/* $(PPP_BUILD_DIR)/
- chmod 0755 $(PPP_BUILD_DIR)/etc
- chmod 0755 $(PPP_BUILD_DIR)/etc/ppp
- chmod 0600 $(PPP_BUILD_DIR)/etc/ppp/chap-secrets
- chmod 0644 $(PPP_BUILD_DIR)/etc/ppp/options
- chmod 0755 $(PPP_BUILD_DIR)/etc/ppp/peers
- chmod 0755 $(PPP_BUILD_DIR)/usr
- chmod 0755 $(PPP_BUILD_DIR)/usr/sbin
- chmod 0755 $(PPP_BUILD_DIR)/usr/sbin/*
- cp -a $(PPP_IPK_DIR)/CONTROL $(PPP_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(PPP_VERSION)-$(PPP_RELEASE)/" $(PPP_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(PPP_BUILD_DIR)/CONTROL/control
-
- touch $(PPP_BUILD_DIR)/CONTROL/control
-
-
-$(PPP_IPK): $(PPP_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PPP_BUILD_DIR)
-
-
-$(PPP_RADIUS_PLUGIN_BUILD_DIR)/CONTROL/control: $(PPP_DIR)/.stamp-built
- rm -rf $(PPP_RADIUS_PLUGIN_BUILD_DIR)
- mkdir -p $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr/lib/pppd/$(PPP_VERSION)
- cp -a $(PPP_DIR)/pppd/plugins/radius/radius.so $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr/lib/pppd/$(PPP_VERSION)/
- $(STRIP) $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr/lib/pppd/$(PPP_VERSION)/*
- cp -a $(PPP_RADIUS_PLUGIN_IPK_DIR)/root/* $(PPP_RADIUS_PLUGIN_BUILD_DIR)/
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/etc
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/etc/ppp
- chmod 0644 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/etc/ppp/radius.conf
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/etc/ppp/radius
- chmod 0644 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/etc/ppp/radius/dict*
- chmod 0600 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/etc/ppp/radius/servers
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr/lib
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr/lib/pppd
- chmod 0755 $(PPP_RADIUS_PLUGIN_BUILD_DIR)/usr/lib/pppd/$(PPP_VERSION)
- cp -a $(PPP_RADIUS_PLUGIN_IPK_DIR)/CONTROL $(PPP_RADIUS_PLUGIN_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(PPP_VERSION)-$(PPP_RELEASE)/" $(PPP_RADIUS_PLUGIN_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(PPP_RADIUS_PLUGIN_BUILD_DIR)/CONTROL/control
-
- touch $(PPP_RADIUS_PLUGIN_BUILD_DIR)/CONTROL/control
-
-
-$(PPP_RADIUS_PLUGIN_IPK): $(PPP_RADIUS_PLUGIN_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PPP_RADIUS_PLUGIN_BUILD_DIR)
-
-
-ppp-ipk: ipkg-utils $(PPP_IPK) $(PPP_RADIUS_PLUGIN_IPK)
-
-ppp-ipk-clean:
- rm -rf $(PPP_IPK) $(PPP_RADIUS_PLUGIN_IPK)
- rm -rf $(PPP_BUILD_DIR) $(PPP_RADIUS_PLUGIN_BUILD_DIR)
-
-ppp-clean:
- cd $(PPP_DIR) ; \
- $(MAKE) clean
-
-ppp-dirclean:
- rm -rf $(PPP_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# pppd
-#
-#############################################################
-PPPD_SOURCE:=ppp-2.4.1.tar.gz
-PPPD_SITE:=ftp://ftp.samba.org/pub/ppp
-PPPD_DIR:=$(BUILD_DIR)/ppp-2.4.1
-PPPD_CAT:=zcat
-PPPD_BINARY:=pppd/pppd
-PPPD_TARGET_BINARY:=usr/sbin/pppd
-
-
-$(DL_DIR)/$(PPPD_SOURCE):
- $(WGET) -P $(DL_DIR) $(PPPD_SITE)/$(PPPD_SOURCE)
-
-pppd-source: $(DL_DIR)/$(PPPD_SOURCE)
-
-$(PPPD_DIR)/.unpacked: $(DL_DIR)/$(PPPD_SOURCE)
- $(PPPD_CAT) $(DL_DIR)/$(PPPD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SED) 's/ -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP//' $(PPPD_DIR)/pppd/Makefile.linux
- $(SED) 's/$(INSTALL) -s/$(INSTALL)/' $(PPPD_DIR)/*/Makefile.linux
- $(SED) 's/ -o root//' $(PPPD_DIR)/*/Makefile.linux
- $(SED) 's/ -g daemon//' $(PPPD_DIR)/*/Makefile.linux
- touch $(PPPD_DIR)/.unpacked
-
-$(PPPD_DIR)/.configured: $(PPPD_DIR)/.unpacked
- (cd $(PPPD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(PPPD_DIR)/.configured
-
-$(PPPD_DIR)/$(PPPD_BINARY): $(PPPD_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(PPPD_DIR)
-
-$(TARGET_DIR)/$(PPPD_TARGET_BINARY): $(PPPD_DIR)/$(PPPD_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(PPPD_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-pppd: uclibc $(TARGET_DIR)/$(PPPD_TARGET_BINARY)
-
-pppd-clean:
- rm -f $(TARGET_DIR)/usr/sbin/pppd
- rm -f $(TARGET_DIR)/usr/sbin/chat
- rm -rf $(TARGET_DIR)/etc/ppp
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(PPPD_DIR) uninstall
- -$(MAKE) -C $(PPPD_DIR) clean
-
-pppd-dirclean:
- rm -rf $(PPPD_DIR)
-
-
+++ /dev/null
-# build the Linksys pppoecd
-
-# Note that this patches the linksys pppd before patching pppoecd.
-# The pppd patch changes the pathnames that pppoecd will use.
-# In an attempt to avoid conflicts the marker file is called
-# .patched-pppoecd in the pppd directory.
-
-PPPD_DIR=$(BUILD_DIR)/WRT54GS/release/src/router/ppp/pppd
-PPPD_PATCH_DIR=$(OPENWRT_IPK_DIR)/pppoecd
-
-PPPOECD_DIR=$(BUILD_DIR)/WRT54GS/release/src/router/ppp/pppoecd
-PPPOECD_IPK_DIR=$(OPENWRT_IPK_DIR)/pppoecd
-PPPOECD_IPK_BUILD_DIR=$(BUILD_DIR)/pppoecd-1.0
-PPPOECD_PACKAGE=$(BUILD_DIR)/pppoecd_1.0_mipsel.ipk
-PPPOECD_BIN=$(TARGET_DIR)/sbin/pppoecd
-PPPOECD_IPK_BIN=$(PPPOECD_IPK_BUILD_DIR)/sbin/pppoecd
-
-# patch pppd for the openwrt compatible path names
-$(PPPD_DIR)/.patched-pppoecd: $(BUILD_DIR)/WRT54GS/.source
- cat $(PPPD_PATCH_DIR)/pppoecd-pathnames.patch | patch -d $(PPPD_DIR)
- touch $(PPPD_DIR)/.patched-pppoecd
-
-# patch the pppoecd itself for GCC3.x compatibility and to move pppoecd to /sbin
-$(PPPOECD_DIR)/.patched: $(PPPD_DIR)/.patched-pppoecd
- cat $(PPPOECD_IPK_DIR)/pppoecd.patch | patch -d $(PPPOECD_DIR)
- touch $(PPPOECD_DIR)/.patched
-
-# build the pppoecd binary for the ipk version
-$(PPPOECD_IPK_BIN): $(PPPOECD_DIR)/.patched
- mkdir -p $(PPPOECD_IPK_BUILD_DIR)/etc/ppp
- cp $(PPPOECD_IPK_DIR)/root/etc/ppp/ip-up $(PPPOECD_IPK_BUILD_DIR)/etc/ppp/ip-up
- chmod a+x $(PPPOECD_IPK_BUILD_DIR)/etc/ppp/ip-up
- $(MAKE) -C $(PPPOECD_DIR) CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(PPPOECD_IPK_BUILD_DIR) LIBDIR=$(UCLIBC_DIR)/lib \
- STRIP="$(STRIP)" \
- install
-
-# setup ipkg control files
-$(PPPOECD_IPK_BUILD_DIR)/CONTROL/control:
- mkdir -p $(PPPOECD_IPK_BUILD_DIR)/CONTROL
- cp $(PPPOECD_IPK_DIR)/CONTROL/prerm $(PPPOECD_IPK_BUILD_DIR)/CONTROL/prerm
- chmod a+x $(PPPOECD_IPK_BUILD_DIR)/CONTROL/prerm
- cp $(PPPOECD_IPK_DIR)/CONTROL/postrm $(PPPOECD_IPK_BUILD_DIR)/CONTROL/postrm
- chmod a+x $(PPPOECD_IPK_BUILD_DIR)/CONTROL/postrm
- cp $(PPPOECD_IPK_DIR)/CONTROL/conffiles $(PPPOECD_IPK_BUILD_DIR)/CONTROL/conffiles
- cp $(PPPOECD_IPK_DIR)/CONTROL/control $(PPPOECD_IPK_BUILD_DIR)/CONTROL/control
-
-# build the ipk package
-$(PPPOECD_PACKAGE): $(PPPOECD_IPK_BIN) $(PPPOECD_IPK_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PPPOECD_IPK_BUILD_DIR)
-
-# main target for building the ipk version
-pppoecd-ipk: $(PPPOECD_PACKAGE)
-
-# the embedded binary
-$(PPPOECD_BIN): $(PPPOECD_DIR)/.patched
- mkdir -p $(TARGET_DIR)/etc/ppp
- cp $(PPPOECD_IPK_DIR)/root/etc/ppp/ip-up $(TARGET_DIR)/etc/ppp/ip-up
- chmod a+x $(TARGET_DIR)/etc/ppp/ip-up
- $(MAKE) -C $(PPPOECD_DIR) CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) LIBDIR=$(UCLIBC_DIR)/lib \
- STRIP="$(STRIP)" \
- install
-
-# main target for building the embedded version
-pppoecd: $(PPPOECD_BIN)
-
-pppoecd-clean:
- -$(MAKE) -C $(PPPOECD_DIR) clean
- rm -f $(TARGET_DIR)/usr/sbin/pppoecd
- rm -rf $(PPPOECD_IPK_BUILD_DIR)
- rm -f $(PPPOECD_PACKAGE)
+++ /dev/null
-## pptp-client
-
-PPTPC_VERSION := 1.5.0
-PPTPC_RELEASE := 1
-
-PPTPC_SOURCE := pptp-linux-$(PPTPC_VERSION).tar.gz
-PPTPC_SITE := dl.sourceforge.net/sourceforge/pptpclient/
-PPTPC_DIR := $(BUILD_DIR)/pptp-linux-$(PPTPC_VERSION)
-PPTPC_CAT := zcat
-
-PPTPC_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/pptp-client
-
-PPTPC_BUILD_DIR := $(BUILD_DIR)/pptp-client_$(PPTPC_VERSION)-$(PPTPC_RELEASE)
-PPTPC_IPK_DIR := $(OPENWRT_IPK_DIR)/pptp-client
-PPTPC_IPK := $(PPTPC_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(PPTPC_SOURCE):
- $(WGET) -P $(DL_DIR) $(PPTPC_SITE)/$(PPTPC_SOURCE)
-
-
-$(PPTPC_DIR)/.stamp-unpacked: $(DL_DIR)/$(PPTPC_SOURCE)
- $(PPTPC_CAT) $(DL_DIR)/$(PPTPC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(PPTPC_DIR)/.stamp-unpacked
-
-
-$(PPTPC_DIR)/.stamp-patched: $(PPTPC_DIR)/.stamp-unpacked
-
- touch $(PPTPC_DIR)/.stamp-patched
-
-
-$(PPTPC_DIR)/.stamp-configured: $(PPTPC_DIR)/.stamp-patched
-
- touch $(PPTPC_DIR)/.stamp-configured
-
-
-$(PPTPC_DIR)/.stamp-built: $(PPTPC_DIR)/.stamp-configured
- cd $(PPTPC_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- DEBUG="" \
- OPTIMIZE="$(TARGET_CFLAGS)" \
- all \
-
- touch $(PPTPC_DIR)/.stamp-built
-
-
-$(PPTPC_BUILD_DIR): $(PPTPC_DIR)/.stamp-built
- mkdir -p $(PPTPC_BUILD_DIR)
-
- install -m0755 -d $(PPTPC_BUILD_DIR)/usr/sbin
- install -m0755 $(PPTPC_DIR)/pptp $(PPTPC_BUILD_DIR)/usr/sbin
-
- install -m0755 -d $(PPTPC_BUILD_DIR)/etc/ppp
- install -m0644 $(PPTPC_IPK_DIR)/root/etc/ppp/pptp-client-options $(PPTPC_BUILD_DIR)/etc/ppp/
- install -m0755 -d $(PPTPC_BUILD_DIR)/etc/ppp/peers
- install -m0644 $(PPTPC_IPK_DIR)/root/etc/ppp/peers/pptp-client-sample $(PPTPC_BUILD_DIR)/etc/ppp/peers/
-
- $(STRIP) $(PPTPC_BUILD_DIR)/usr/sbin/*
-
- touch $(PPTPC_DIR)/.stamp-installed
-
-
-$(PPTPC_IPK): $(PPTPC_BUILD_DIR)
- cp -a $(PPTPC_IPK_DIR)/CONTROL $(PPTPC_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(PPTPC_VERSION)-$(PPTPC_RELEASE)/" $(PPTPC_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(PPTPC_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PPTPC_BUILD_DIR)
-
-
-pptp-client-ipk: ipkg-utils $(PPTPC_IPK)
-
-pptp-client-clean:
- $(MAKE) -C $(PPTPC_DIR) clean
-
-pptp-client-clean-all:
- rm -rf $(PPTPC_IPK)
- rm -rf $(PPTPC_BUILD_DIR)
- rm -rf $(PPTPC_DIR)
+++ /dev/null
-## pptp-server
-
-PPTPD_VERSION := 1.1.3
-PPTPD_RELEASE := 1
-
-PPTPD_SOURCE := pptpd-1.1.3-20030409.tar.gz
-PPTPD_SITE := http://unc.dl.sourceforge.net/sourceforge/poptop/
-PPTPD_DIR := $(BUILD_DIR)/poptop
-PPTPD_CAT := zcat
-
-PPTPD_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/pptp-server
-
-PPTPD_BUILD_DIR := $(BUILD_DIR)/pptp-server_$(PPTPD_VERSION)-$(PPTPD_RELEASE)
-PPTPD_IPK_DIR := $(OPENWRT_IPK_DIR)/pptp-server
-PPTPD_IPK := $(PPTPD_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(PPTPD_SOURCE):
- $(WGET) -P $(DL_DIR) $(PPTPD_SITE)/$(PPTPD_SOURCE)
-
-
-$(PPTPD_DIR)/.stamp-unpacked: $(DL_DIR)/$(PPTPD_SOURCE)
- $(PPTPD_CAT) $(DL_DIR)/$(PPTPD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(PPTPD_DIR)/.stamp-unpacked
-
-
-$(PPTPD_DIR)/.stamp-patched: $(PPTPD_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(PPTPD_DIR) $(PPTPD_PATCH_DIR)
-
- touch $(PPTPD_DIR)/.stamp-patched
-
-
-$(PPTPD_DIR)/.stamp-configured: $(PPTPD_DIR)/.stamp-patched
- cd $(PPTPD_DIR) ; \
- rm -rf config.cache ; \
- aclocal ; \
- autoconf ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --datadir=/usr/share \
- --infodir=/usr/share/info \
- --mandir=/usr/share/man \
- --localstatedir=/var \
- --sysconfdir=/etc \
- $(DISABLE_NLS) \
- --with-pppd-ip-alloc \
-
- touch $(PPTPD_DIR)/.stamp-configured
-
-
-$(PPTPD_DIR)/.stamp-built: $(PPTPD_DIR)/.stamp-configured
- cd $(PPTPD_DIR) ; \
- touch config.guess ; \
- touch config.sub ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- COPTS="$(TARGET_CFLAGS)" \
- all
-
- touch $(PPTPD_DIR)/.stamp-built
-
-
-$(PPTPD_BUILD_DIR)/CONTROL/control: $(PPTPD_DIR)/.stamp-built
- rm -rf $(PPTPD_BUILD_DIR)
- mkdir -p $(PPTPD_BUILD_DIR)/usr/sbin
- cp -a $(PPTPD_DIR)/pptpctrl $(PPTPD_BUILD_DIR)/usr/sbin/
- cp -a $(PPTPD_DIR)/pptpd $(PPTPD_BUILD_DIR)/usr/sbin/
- $(STRIP) $(PPTPD_BUILD_DIR)/usr/sbin/*
- cp -a $(PPTPD_IPK_DIR)/root/* $(PPTPD_BUILD_DIR)/
- chmod 0755 $(PPTPD_BUILD_DIR)/etc
- chmod 0755 $(PPTPD_BUILD_DIR)/etc/init.d
- chmod 0755 $(PPTPD_BUILD_DIR)/etc/init.d/*
- chmod 0755 $(PPTPD_BUILD_DIR)/etc/ppp
- chmod 0644 $(PPTPD_BUILD_DIR)/etc/ppp/pptp-server-options
- chmod 0644 $(PPTPD_BUILD_DIR)/etc/pptpd.conf
- chmod 0755 $(PPTPD_BUILD_DIR)/usr
- chmod 0755 $(PPTPD_BUILD_DIR)/usr/sbin
- chmod 0755 $(PPTPD_BUILD_DIR)/usr/sbin/*
- cp -a $(PPTPD_IPK_DIR)/CONTROL $(PPTPD_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(PPTPD_VERSION)-$(PPTPD_RELEASE)/" $(PPTPD_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(PPTPD_BUILD_DIR)/CONTROL/control
-
- touch $(PPTPD_BUILD_DIR)/CONTROL/control
-
-
-$(PPTPD_IPK): $(PPTPD_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(PPTPD_BUILD_DIR)
-
-
-pptp-server-ipk: ipkg-utils $(PPTPD_IPK)
-
-pptp-server-clean:
- rm -rf $(PPTPD_IPK)
- rm -rf $(PPTPD_BUILD_DIR)
- rm -rf $(PPTPD_DIR)
+++ /dev/null
-#############################################################
-#
-# radvd
-#
-#############################################################
-RADVD_VERSION:=0.7.2
-RADVD_SOURCE:=radvd-$(RADVD_VERSION).tar.gz
-RADVD_SITE:=http://v6web.litech.org/radvd/dist
-RADVD_DIR:=$(BUILD_DIR)/radvd-$(RADVD_VERSION)
-RADVD_IPK=$(BUILD_DIR)/radvd_0.7.2-1_mipsel.ipk
-RADVD_IPK_DIR:=$(BUILD_DIR)/radvd-0.7.2-ipk
-
-$(DL_DIR)/$(RADVD_SOURCE):
- $(WGET) -P $(DL_DIR) $(RADVD_SITE)/$(RADVD_SOURCE)
-
-radvd-source: $(DL_DIR)/$(RADVD_SOURCE)
-
-$(RADVD_DIR)/.unpacked: $(DL_DIR)/$(RADVD_SOURCE)
- tar -C $(BUILD_DIR) -zxf $(DL_DIR)/$(RADVD_SOURCE)
- touch $(RADVD_DIR)/.unpacked
-
-$(RADVD_DIR)/.configured: $(RADVD_DIR)/.unpacked
- (cd $(RADVD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --with-logfile=/tmp/radvd.log \
- --with-pidfile=/tmp/run/radvd.pid \
- --with-configfile=/etc/radvd.conf \
- );
- touch $(RADVD_DIR)/.configured
-
-$(RADVD_DIR)/radvd: $(RADVD_DIR)/.configured
- cp $(FLEX_DIR)/libfl.a $(RADVD_DIR)/libfl.a
- $(MAKE) $(TARGET_CONFIGURE_OPTS) LD=$(TARGET_CC) LDFLAGS=-L. -C $(RADVD_DIR)
-
-$(RADVD_IPK): $(RADVD_DIR)/radvd
- mkdir -p $(RADVD_IPK_DIR)/CONTROL $(RADVD_IPK_DIR)/etc $(RADVD_IPK_DIR)/usr/sbin
- install -m 644 $(OPENWRT_IPK_DIR)/radvd/CONTROL/control $(RADVD_IPK_DIR)/CONTROL/control
- install -m 755 $(OPENWRT_IPK_DIR)/radvd/CONTROL/postinst $(RADVD_IPK_DIR)/CONTROL/postinst
- install -m 644 $(OPENWRT_IPK_DIR)/radvd/radvd.conf.example $(RADVD_IPK_DIR)/etc/radvd.conf.example
- install -m 755 $(RADVD_DIR)/radvd $(RADVD_IPK_DIR)/usr/sbin/
- install -m 755 $(RADVD_DIR)/radvdump $(RADVD_IPK_DIR)/usr/sbin/
- $(STRIP) $(RADVD_IPK_DIR)/usr/sbin/radvd
- $(STRIP) $(RADVD_IPK_DIR)/usr/sbin/radvdump
- cd $(BUILD_DIR); $(IPKG_BUILD) $(RADVD_IPK_DIR)
-
-radvd-ipk : uclibc $(FLEX_DIR)/$(FLEX_BINARY) $(RADVD_IPK)
-
-radvd-clean:
- -$(MAKE) -C $(RADVD_DIR) clean
-
-radvd-dirclean:
- rm -rf $(RADVD_DIR) $(RADVD_IPK_DIR)
-
+++ /dev/null
-#############################################################
-#
-# sed
-#
-#############################################################
-SED_SOURCE:=sed-4.0.8.tar.gz
-SED_SITE:=ftp://ftp.gnu.org/gnu/sed
-SED_CAT:=zcat
-SED_DIR1:=$(TOOL_BUILD_DIR)/sed-4.0.8
-SED_DIR2:=$(BUILD_DIR)/sed-4.0.8
-SED_BINARY:=sed/sed
-SED_TARGET_BINARY:=bin/sed
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-SED_CPPFLAGS=-D_FILE_OFFSET_BITS=64
-endif
-SED:=$(STAGING_DIR)/bin/sed -i -e
-
-HOST_SED_TARGET=$(shell ./sources/sedcheck.sh)
-
-$(DL_DIR)/$(SED_SOURCE):
- $(WGET) -P $(DL_DIR) $(SED_SITE)/$(SED_SOURCE)
-
-sed-source: $(DL_DIR)/$(SED_SOURCE)
-
-
-#############################################################
-#
-# build sed for use on the host system
-#
-#############################################################
-$(SED_DIR1)/.unpacked: $(DL_DIR)/$(SED_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- mkdir -p $(DL_DIR)
- mkdir -p $(STAGING_DIR)/bin;
- $(SED_CAT) $(DL_DIR)/$(SED_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(SED_DIR1)/.unpacked
-
-$(SED_DIR1)/.configured: $(SED_DIR1)/.unpacked
- (cd $(SED_DIR1); rm -rf config.cache; \
- ./configure \
- --prefix=$(STAGING_DIR) \
- --prefix=/usr \
- );
- touch $(SED_DIR1)/.configured
-
-$(SED_DIR1)/$(SED_BINARY): $(SED_DIR1)/.configured
- $(MAKE) -C $(SED_DIR1)
-
-# This stuff is needed to work around GNU make deficiencies
-build-sed-host-binary: $(SED_DIR1)/$(SED_BINARY)
- @if [ -L $(STAGING_DIR)/$(SED_TARGET_BINARY) ] ; then \
- rm -f $(STAGING_DIR)/$(SED_TARGET_BINARY); fi;
- @if [ ! -f $(STAGING_DIR)/$(SED_TARGET_BINARY) -o $(STAGING_DIR)/$(SED_TARGET_BINARY) \
- -ot $(SED_DIR1)/$(SED_BINARY) ] ; then \
- set -x; \
- mkdir -p $(STAGING_DIR)/bin; \
- $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SED_DIR1) install; \
- mv $(STAGING_DIR)/usr/bin/sed $(STAGING_DIR)/bin/; \
- rm -rf $(STAGING_DIR)/share/locale $(STAGING_DIR)/usr/info \
- $(STAGING_DIR)/usr/man $(STAGING_DIR)/usr/share/doc; fi
-
-use-sed-host-binary:
- @if [ -x /usr/bin/sed ]; then SED="/usr/bin/sed"; else \
- if [ -x /bin/sed ]; then SED="/bin/sed"; fi; fi; \
- mkdir -p $(STAGING_DIR)/bin; \
- rm -f $(STAGING_DIR)/$(SED_TARGET_BINARY); \
- ln -s $$SED $(STAGING_DIR)/$(SED_TARGET_BINARY)
-
-host-sed: $(HOST_SED_TARGET)
-
-host-sed-clean:
- $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SED_DIR1) uninstall
- -$(MAKE) -C $(SED_DIR1) clean
-
-host-sed-dirclean:
- rm -rf $(SED_DIR1)
-
-
-#############################################################
-#
-# build sed for use on the target system
-#
-#############################################################
-$(SED_DIR2)/.unpacked: $(DL_DIR)/$(SED_SOURCE)
- $(SED_CAT) $(DL_DIR)/$(SED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(SED_DIR2)/.unpacked
-
-$(SED_DIR2)/.configured: $(SED_DIR2)/.unpacked
- (cd $(SED_DIR2); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- CPPFLAGS="$(SED_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(SED_DIR2)/.configured
-
-$(SED_DIR2)/$(SED_BINARY): $(SED_DIR2)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(SED_DIR2)
-
-# This stuff is needed to work around GNU make deficiencies
-sed-target_binary: $(SED_DIR2)/$(SED_BINARY)
- @if [ -L $(TARGET_DIR)/$(SED_TARGET_BINARY) ] ; then \
- rm -f $(TARGET_DIR)/$(SED_TARGET_BINARY); fi;
-
- @if [ ! -f $(SED_DIR2)/$(SED_BINARY) -o $(TARGET_DIR)/$(SED_TARGET_BINARY) \
- -ot $(SED_DIR2)/$(SED_BINARY) ] ; then \
- set -x; \
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR2) install; \
- mv $(TARGET_DIR)/usr/bin/sed $(TARGET_DIR)/bin/; \
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc; fi
-
-sed: uclibc sed-target_binary
-
-sed-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(SED_DIR2) uninstall
- -$(MAKE) -C $(SED_DIR2) clean
-
-sed-dirclean:
- rm -rf $(SED_DIR2)
-
-
+++ /dev/null
-#############################################################
-#
-# slang
-#
-#############################################################
-SLANG_SOURCE=slang-1.4.5-mini.tar.bz2
-SLANG_SITE:=http://www.uclibc.org/
-SLANG_DIR=$(BUILD_DIR)/slang-1.4.5-mini
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-SLANG_CFLAGS=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-endif
-SLANG_CFLAGS+=-fPIC
-
-$(DL_DIR)/$(SLANG_SOURCE):
- $(WGET) -P $(DL_DIR) $(SLANG_SITE)/$(SLANG_SOURCE)
-
-$(SLANG_DIR): $(DL_DIR)/$(SLANG_SOURCE)
- bzcat $(DL_DIR)/$(SLANG_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
-$(SLANG_DIR)/libslang.so: $(SLANG_DIR)
- $(MAKE) CFLAGS="-Os -g $(SLANG_CFLAGS)" CC=$(TARGET_CC) -C $(SLANG_DIR)
- touch -c $(SLANG_DIR)/libslang.so;
-
-$(STAGING_DIR)/lib/libslang.so.1: $(SLANG_DIR)/libslang.so
- cp -a $(SLANG_DIR)/libslang.a $(STAGING_DIR)/lib;
- cp -a $(SLANG_DIR)/libslang.so $(STAGING_DIR)/lib;
- cp -a $(SLANG_DIR)/slang.h $(STAGING_DIR)/include;
- cp -a $(SLANG_DIR)/slcurses.h $(STAGING_DIR)/include;
- (cd $(STAGING_DIR)/lib; ln -fs libslang.so libslang.so.1);
- touch -c $(STAGING_DIR)/lib/libslang.so.1
-
-$(TARGET_DIR)/lib/libslang.so.1: $(STAGING_DIR)/lib/libslang.so.1
- cp -a $(STAGING_DIR)/lib/libslang.so* $(TARGET_DIR)/lib;
- -$(STRIP) $(TARGET_DIR)/lib/libslang.so*
- touch -c $(TARGET_DIR)/lib/libslang.so.1
-
-slang: uclibc $(STAGING_DIR)/lib/libslang.so.1 $(TARGET_DIR)/lib/libslang.so.1
-
-slang-source: $(DL_DIR)/$(SLANG_SOURCE)
-
-slang-clean:
- rm -f $(TARGET_DIR)/lib/libslang.so*
- -$(MAKE) -C $(SLANG_DIR) clean
-
-slang-dirclean:
- rm -rf $(SLANG_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# socat
-#
-#############################################################
-
-SOCAT_VERSION=1.3.0.1
-
-# Don't alter below this line unless you (think) you know
-# what you are doing! Danger, Danger!
-
-SOCAT_SOURCE=socat-$(SOCAT_VERSION).tar.bz2
-SOCAT_SITE=http://www.dest-unreach.org/socat/download/
-#SOCAT_DIR=$(BUILD_DIR)/${shell basename $(SOCAT_SOURCE) .tar.bz2}
-SOCAT_DIR=$(BUILD_DIR)/socat-1.3
-#SOCAT_WORKDIR=$(BUILD_DIR)/socat_workdir
-SOCAT_WORKDIR=$(SOCAT_DIR)
-
-$(DL_DIR)/$(SOCAT_SOURCE):
- $(WGET) -P $(DL_DIR) $(SOCAT_SITE)/$(SOCAT_SOURCE)
-
-$(SOCAT_DIR)/.unpacked: $(DL_DIR)/$(SOCAT_SOURCE)
- bzip2 -d -c $(DL_DIR)/$(SOCAT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(SOCAT_DIR)/.unpacked
-
-$(SOCAT_WORKDIR)/Makefile: $(SOCAT_DIR)/.unpacked
- rm -f $(SOCAT_WORKDIR)/Makefile
- mkdir -p $(SOCAT_WORKDIR)
- (cd $(SOCAT_WORKDIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(SOCAT_DIR)/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
-
-$(SOCAT_WORKDIR)/socat: $(SOCAT_WORKDIR)/Makefile
- rm -f $@
- $(MAKE) -C $(SOCAT_WORKDIR)
-
-$(SOCAT_WORKDIR)/.installed: $(SOCAT_WORKDIR)/socat
- mkdir -p $(TARGET_DIR)/usr/man/man1
- $(MAKE) -C $(SOCAT_WORKDIR) install prefix=$(TARGET_DIR)/usr
-
-socat: uclibc $(SOCAT_WORKDIR)/.installed
-
-socat-source: $(DL_DIR)/$(SOCAT_SOURCE)
-
-socat-clean:
- @if [ -d $(SOCAT_WORKDIR)/Makefile ] ; then \
- $(MAKE) -C $(SOCAT_WORKDIR) clean ; \
- fi;
-
-socat-dirclean:
- rm -rf $(SOCAT_DIR) $(SOCAT_WORKDIR)
-
+++ /dev/null
-#############################################################
-#
-# mksquashfs to build to target squashfs filesystems
-#
-#############################################################
-SQUASHFS_DIR=$(BUILD_DIR)/squashfs2.0r2
-SQUASHFS_SOURCE=squashfs2.0-r2.tar.gz
-SQUASHFS_SITE=http://dl.sourceforge.net/sourceforge/squashfs
-
-$(DL_DIR)/$(SQUASHFS_SOURCE):
- $(WGET) -P $(DL_DIR) $(SQUASHFS_SITE)/$(SQUASHFS_SOURCE)
-
-$(SQUASHFS_DIR)/.unpacked: $(DL_DIR)/$(SQUASHFS_SOURCE) #$(SQUASHFS_PATCH)
- zcat $(DL_DIR)/$(SQUASHFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SOURCE_DIR)/patch-kernel.sh $(SQUASHFS_DIR) $(SOURCE_DIR) squashfs.patch
- touch $(SQUASHFS_DIR)/.unpacked
-
-$(SQUASHFS_DIR)/squashfs-tools/mksquashfs: $(SQUASHFS_DIR)/.unpacked
- $(MAKE) -C $(SQUASHFS_DIR)/squashfs-tools;
-
-squashfs: $(SQUASHFS_DIR)/squashfs-tools/mksquashfs
-
-squashfs-source: $(DL_DIR)/$(SQUASHFS_SOURCE)
-
-squashfs-clean:
- -$(MAKE) -C $(SQUASHFS_DIR)/squashfs-tools clean
-
-squashfs-dirclean:
- rm -rf $(SQUASHFS_DIR)
-
-#############################################################
-#
-# Build the squashfs root filesystem image
-#
-#############################################################
-
-squashfsroot: squashfs
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- #-@find $(TARGET_DIR) -type f -perm +111 | xargs $(STAGING_DIR)/bin/sstrip 2>/dev/null || true;
- @rm -rf $(TARGET_DIR)/usr/man
- @rm -rf $(TARGET_DIR)/usr/info
- #$(SQUASHFS_DIR)/squashfs-tools/mksquashfs -q -D $(SOURCE_DIR)/device_table.txt $(TARGET_DIR) $(IMAGE)
- $(SQUASHFS_DIR)/squashfs-tools/mksquashfs $(TARGET_DIR) $(IMAGE) -noappend -root-owned -le
-
-squashfsroot-source: squashfs-source
-
-squashfsroot-clean:
- -$(MAKE) -C $(SQUASHFS_DIR) clean
-
-squashfsroot-dirclean:
- rm -rf $(SQUASHFS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# strace
-#
-#############################################################
-STRACE_SOURCE:=strace-4.5.6.tar.bz2
-STRACE_SITE:=http://aleron.dl.sourceforge.net/sourceforge/strace
-STRACE_CAT:=bzcat
-STRACE_DIR:=$(BUILD_DIR)/strace-4.5.6
-STRACE_IPK=$(BUILD_DIR)/strace_4.5.6-1_mipsel.ipk
-STRACE_IPK_DIR:=$(BUILD_DIR)/strace-4.5.6-ipk
-
-
-$(DL_DIR)/$(STRACE_SOURCE):
- $(WGET) -P $(DL_DIR) $(STRACE_SITE)/$(STRACE_SOURCE)
-
-strace-source: $(DL_DIR)/$(STRACE_SOURCE)
-
-$(STRACE_DIR)/.unpacked: $(DL_DIR)/$(STRACE_SOURCE)
- $(STRACE_CAT) $(DL_DIR)/$(STRACE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(STRACE_DIR)/.unpacked
-
-$(STRACE_DIR)/.configured: $(STRACE_DIR)/.unpacked
- (cd $(STRACE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(STRACE_DIR)/.configured
-
-$(STRACE_DIR)/strace: $(STRACE_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(STRACE_DIR)
-
-$(TARGET_DIR)/usr/bin/strace: $(STRACE_DIR)/strace
- install -c $(STRACE_DIR)/strace $(TARGET_DIR)/usr/bin/strace
- $(STRIP) $(TARGET_DIR)/usr/bin/strace > /dev/null 2>&1
-
-strace: uclibc $(TARGET_DIR)/usr/bin/strace
-
-strace-ipk: $(STRACE_DIR)/strace
- mkdir -p $(STRACE_IPK_DIR)/CONTROL
- mkdir -p $(STRACE_IPK_DIR)/usr/bin
- install -m 644 $(OPENWRT_IPK_DIR)/strace/CONTROL/control $(STRACE_IPK_DIR)/CONTROL/control
- install -m 755 $(STRACE_DIR)/strace $(STRACE_IPK_DIR)/usr/bin/
- $(STRIP) $(STRACE_IPK_DIR)/usr/bin/strace
- cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(STRACE_IPK_DIR)
-
-strace-clean:
- $(MAKE) -C $(STRACE_DIR) clean
-
-strace-dirclean:
- rm -rf $(STRACE_DIR) $(STRACE_IPK_DIR)
+++ /dev/null
-#############################################################
-#
-# System Linux kernel target
-#
-# This uses an existing linux kernel source tree on
-# your build system, and makes no effort at compiling
-# anything....
-#
-# You will probably want to change LINUX_SOURCE to
-# point to wherever you installed you kernel.
-#
-# -Erik
-#
-#############################################################
-ifneq ($(filter $(TARGETS),system-linux),)
-
-LINUX_SOURCE=/usr/src/linux
-LINUX_DIR=$(BUILD_DIR)/linux
-LINUX_KERNEL=$(BUILD_DIR)/buildroot-kernel
-# Used by pcmcia-cs and others
-LINUX_SOURCE_DIR=$(LINUX_SOURCE)
-
-$(LINUX_DIR)/.configured:
- mkdir -p $(LINUX_DIR)/include
- (cd $(LINUX_DIR)/include; \
- for i in $(LINUX_SOURCE)/include/*; do ln -sf $$i ; done; \
- rm -f asm; \
- if [ "$(ARCH)" = "powerpc" ];then \
- ln -fs asm-ppc asm; \
- elif [ "$(ARCH)" = "mips" ];then \
- ln -fs asm-mips asm; \
- elif [ "$(ARCH)" = "mipsel" ];then \
- ln -fs asm-mips asm; \
- elif [ "$(ARCH)" = "arm" ];then \
- ln -fs asm-arm asm; \
- (cd asm-arm; \
- if [ ! -L proc ] ; then \
- ln -fs proc-armv proc; \
- ln -fs arch-ebsa285 arch; fi); \
- elif [ "$(ARCH)" = "cris" ];then \
- ln -fs asm-cris asm; \
- else ln -fs asm-$(ARCH) asm; \
- fi)
- cp $(LINUX_SOURCE)/Makefile $(LINUX_DIR)/
- cp $(LINUX_SOURCE)/Rules.make $(LINUX_DIR)/
- touch $(LINUX_DIR)/.configured
-
-$(LINUX_KERNEL): $(LINUX_DIR)/.configured
-
-system-linux: $(LINUX_DIR)/.configured
-
-system-linux-clean: clean
- rm -f $(LINUX_KERNEL)
- rm -rf $(LINUX_DIR)
-
-system-linux-dirclean:
- rm -rf $(LINUX_DIR)
-
-endif
+++ /dev/null
-#############################################################
-#
-# tar
-#
-#############################################################
-GNUTAR_SOURCE:=tar-1.13.25.tar.gz
-GNUTAR_SITE:=ftp://alpha.gnu.org/gnu/tar
-GNUTAR_DIR:=$(BUILD_DIR)/tar-1.13.25
-GNUTAR_CAT:=zcat
-GNUTAR_BINARY:=src/tar
-GNUTAR_TARGET_BINARY:=bin/tar
-
-$(DL_DIR)/$(GNUTAR_SOURCE):
- $(WGET) -P $(DL_DIR) $(GNUTAR_SITE)/$(GNUTAR_SOURCE)
-
-tar-source: $(DL_DIR)/$(GNUTAR_SOURCE)
-
-$(GNUTAR_DIR)/.unpacked: $(DL_DIR)/$(GNUTAR_SOURCE)
- $(GNUTAR_CAT) $(DL_DIR)/$(GNUTAR_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GNUTAR_DIR)/.unpacked
-
-$(GNUTAR_DIR)/.configured: $(GNUTAR_DIR)/.unpacked
- (cd $(GNUTAR_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(GNUTAR_DIR)/.configured
-
-$(GNUTAR_DIR)/$(GNUTAR_BINARY): $(GNUTAR_DIR)/.configured
- $(MAKE) -C $(GNUTAR_DIR)
-
-# This stuff is needed to work around GNU make deficiencies
-tar-target_binary: $(GNUTAR_DIR)/$(GNUTAR_BINARY)
- @if [ -L $(TARGET_DIR)/$(GNUTAR_TARGET_BINARY) ] ; then \
- rm -f $(TARGET_DIR)/$(GNUTAR_TARGET_BINARY); fi;
- @if [ ! -f $(GNUTAR_DIR)/$(GNUTAR_BINARY) -o $(TARGET_DIR)/$(GNUTAR_TARGET_BINARY) \
- -ot $(GNUTAR_DIR)/$(GNUTAR_BINARY) ] ; then \
- set -x; \
- rm -f $(TARGET_DIR)/$(GNUTAR_TARGET_BINARY); \
- cp -a $(GNUTAR_DIR)/$(GNUTAR_BINARY) $(TARGET_DIR)/$(GNUTAR_TARGET_BINARY); fi ;
-
-tar: uclibc tar-target_binary
-
-tar-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUTAR_DIR) uninstall
- -$(MAKE) -C $(GNUTAR_DIR) clean
-
-tar-dirclean:
- rm -rf $(GNUTAR_DIR)
-
+++ /dev/null
-## tcpdump
-
-TCPDUMP_VERSION:=3.8.3
-TCPDUMP_RELEASE:=1
-
-TCPDUMP_SOURCE:=tcpdump-$(TCPDUMP_VERSION).tar.gz
-TCPDUMP_SITE:=http://www.tcpdump.org/release/
-TCPDUMP_DIR:=$(BUILD_DIR)/tcpdump-$(TCPDUMP_VERSION)
-TCPDUMP_CAT:=zcat
-
-TCPDUMP_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/tcpdump
-
-TCPDUMP_BUILD_DIR := $(BUILD_DIR)/tcpdump_$(TCPDUMP_VERSION)-$(TCPDUMP_RELEASE)
-TCPDUMP_IPK_DIR := $(OPENWRT_IPK_DIR)/tcpdump
-TCPDUMP_IPK := $(TCPDUMP_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(TCPDUMP_SOURCE):
- $(WGET) -P $(DL_DIR) $(TCPDUMP_SITE)/$(TCPDUMP_SOURCE)
-
-
-$(TCPDUMP_DIR)/.stamp-unpacked: $(DL_DIR)/$(TCPDUMP_SOURCE)
- $(TCPDUMP_CAT) $(DL_DIR)/$(TCPDUMP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(TCPDUMP_DIR)/.stamp-unpacked
-
-
-$(TCPDUMP_DIR)/.stamp-patched: $(TCPDUMP_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(TCPDUMP_DIR) $(TCPDUMP_PATCH_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(TCPDUMP_DIR) $(TCPDUMP_DIR)/debian/patches *patch
-
- touch $(TCPDUMP_DIR)/.stamp-patched
-
-
-$(TCPDUMP_DIR)/.stamp-configured: $(TCPDUMP_DIR)/.stamp-patched
- cd $(TCPDUMP_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_linux_vers="2" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- --includedir=/usr/include \
- --libdir=/usr/lib \
- $(DISABLE_NLS) \
- --enable-shared \
- --disable-static \
-
- touch $(TCPDUMP_DIR)/.stamp-configured
-
-
-$(TCPDUMP_DIR)/.stamp-built: $(TCPDUMP_DIR)/.stamp-configured
- cd $(TCPDUMP_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- CCOPT="$(TARGET_OPTIMIZATION)" \
- INCLS="-I. -I$(srcdir)/missing" \
- LDFLAGS="-lpcap" \
- LIBS="" \
-
- touch $(TCPDUMP_DIR)/.stamp-built
-
-
-$(TCPDUMP_DIR)/.stamp-installed: $(TCPDUMP_DIR)/.stamp-built
- mkdir -p $(TCPDUMP_BUILD_DIR)
- cd $(TCPDUMP_DIR) ; \
- $(MAKE) \
- DESTDIR="$(TCPDUMP_BUILD_DIR)" \
- install \
-
- rm -rf $(TCPDUMP_BUILD_DIR)/usr/share
-
- $(STRIP) $(TCPDUMP_BUILD_DIR)/usr/sbin/*
-
- touch $(TCPDUMP_DIR)/.stamp-installed
-
-
-$(TCPDUMP_IPK): $(TCPDUMP_DIR)/.stamp-installed
- cp -a $(TCPDUMP_IPK_DIR)/CONTROL $(TCPDUMP_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(TCPDUMP_VERSION)-$(TCPDUMP_RELEASE)/" $(TCPDUMP_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(TCPDUMP_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(TCPDUMP_BUILD_DIR)
-
-
-tcpdump-source: $(DL_DIR)/$(TCPDUMP_SOURCE)
-
-# libpcap-clean prevent configure to find a local libpcap library
-tcpdump-ipk: ipkg-utils libpcap-ipk libpcap-clean $(TCPDUMP_IPK)
-
-tcpdump-clean:
- $(MAKE) -C $(TCPDUMP_DIR) clean
-
-tcpdump-clean-all:
- rm -rf $(TCPDUMP_DIR)
- rm -rf $(TCPDUMP_BUILD_DIR)
- rm -rf $(TCPDUMP_IPK)
+++ /dev/null
-#############################################################
-#
-# tinylogin
-#
-#############################################################
-# Enable this to use the tinylogin daily snapshot
-USE_TINYLOGIN_SNAPSHOT=true
-
-ifeq ($(USE_TINYLOGIN_SNAPSHOT),true)
-# Be aware that this changes daily....
-TINYLOGIN_DIR:=$(BUILD_DIR)/tinylogin
-TINYLOGIN_SOURCE:=tinylogin-snapshot.tar.bz2
-TINYLOGIN_SITE:=http://tinylogin.busybox.net/downloads/snapshots
-else
-TINYLOGIN_DIR:=$(BUILD_DIR)/tinylogin-1.4
-TINYLOGIN_SOURCE:=tinylogin-1.4.tar.bz2
-TINYLOGIN_SITE:=http://tinylogin.busybox.net/downloads
-endif
-
-$(DL_DIR)/$(TINYLOGIN_SOURCE):
- $(WGET) -P $(DL_DIR) $(TINYLOGIN_SITE)/$(TINYLOGIN_SOURCE)
-
-tinylogin-source: $(DL_DIR)/$(TINYLOGIN_SOURCE)
-
-$(TINYLOGIN_DIR)/Config.h: $(DL_DIR)/$(TINYLOGIN_SOURCE)
- bzcat $(DL_DIR)/$(TINYLOGIN_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SED) "s/\`id -u\` -ne 0/0 == 1/" \
- $(TINYLOGIN_DIR)/install.sh
- $(SED) "s/4755 --owner=root --group=root/755/" \
- $(TINYLOGIN_DIR)/install.sh
- $(SED) "s/^DOSTATIC.*/DOSTATIC=false/g;" $(TINYLOGIN_DIR)/Makefile
- $(SED) "s/^DODEBUG.*/DODEBUG=false/g;" $(TINYLOGIN_DIR)/Makefile
- # date test this one
- touch $(TINYLOGIN_DIR)/Config.h
-
-$(TINYLOGIN_DIR)/tinylogin: $(TINYLOGIN_DIR)/Config.h
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" \
- CFLAGS_EXTRA="$(TARGET_CFLAGS)" -C $(TINYLOGIN_DIR)
-
-$(TARGET_DIR)/bin/tinylogin: $(TINYLOGIN_DIR)/tinylogin
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" \
- PREFIX="$(TARGET_DIR)" -C $(TINYLOGIN_DIR) \
- CFLAGS_EXTRA="$(TARGET_CFLAGS)" install
-
-tinylogin: uclibc $(TARGET_DIR)/bin/tinylogin
-
-tinylogin-clean:
- rm -f $(TARGET_DIR)/bin/tinylogin
- -$(MAKE) -C $(TINYLOGIN_DIR) clean
-
-tinylogin-dirclean:
- rm -rf $(TINYLOGIN_DIR)
+++ /dev/null
-TN5250_SITE:=http://aleron.dl.sourceforge.net/sourceforge/tn5250
-TN5250_DIR:=$(BUILD_DIR)/tn5250-0.16.4
-TN5250_SOURCE:=tn5250-0.16.4.tar.gz
-
-$(DL_DIR)/$(TN5250_SOURCE):
- $(WGET) -P $(DL_DIR) $(TN5250_SITE)/$(TN5250_SOURCE)
-
-$(TN5250_DIR)/.dist: $(DL_DIR)/$(TN5250_SOURCE)
- gunzip -c $(DL_DIR)/$(TN5250_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- -touch $(TN5250_DIR)/.dist
-
-$(TN5250_DIR)/.configured: $(TN5250_DIR)/.dist
- (cd $(TN5250_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --with-slang --without-x --without-ssl \
- );
- touch $(TN5250_DIR)/.configured
-
-$(TN5250_DIR)/tn5250: $(TN5250_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(TN5250_DIR)
-
-$(TARGET_DIR)/usr/bin/tn5250: $(TN5250_DIR)/tn5250
- install -c $(TN5250_DIR)/tn5250 $(TARGET_DIR)/usr/bin/tn5250
-
-tn5250: uclibc slang $(TARGET_DIR)/usr/bin/tn5250
-
-tn5250-source: $(DL_DIR)/$(TN5250_SOURCE)
-
-tn5250-clean:
- $(MAKE) -C $(TN5250_DIR) clean
-
-tn5250-dirclean:
- rm -rf $(TN5250_DIR)
-
-
-
+++ /dev/null
-#############################################################
-#
-# ttcp
-#
-#############################################################
-#
-TTCP_SOURCE_URL=http://ftp.sunet.se/ftp/pub/network/monitoring/ttcp
-TTCP_SOURCE=ttcp.c
-TTCP_BUILD_DIR=$(BUILD_DIR)/ttcp
-
-$(DL_DIR)/$(TTCP_SOURCE):
- $(WGET) -P $(DL_DIR) $(TTCP_SOURCE_URL)/$(TTCP_SOURCE)
-
-$(TTCP_BUILD_DIR)/.unpacked: $(DL_DIR)/$(TTCP_SOURCE)
- -mkdir $(TTCP_BUILD_DIR)
- cp -af $(DL_DIR)/$(TTCP_SOURCE) $(TTCP_BUILD_DIR)
- touch $(TTCP_BUILD_DIR)/.unpacked
-
-$(TTCP_BUILD_DIR)/.configured: $(TTCP_BUILD_DIR)/.unpacked
- touch $(TTCP_BUILD_DIR)/.configured
-
-$(TTCP_BUILD_DIR)/ttcp: $(TTCP_BUILD_DIR)/.configured
- $(TARGET_CC) -O2 -o $(TTCP_BUILD_DIR)/ttcp $(TTCP_BUILD_DIR)/$(TTCP_SOURCE)
-
-$(TARGET_DIR)/usr/bin/ttcp: $(TTCP_BUILD_DIR)/ttcp
- cp -af $(TTCP_BUILD_DIR)/ttcp $(TARGET_DIR)/usr/bin/
-
-ttcp: $(TARGET_DIR)/usr/bin/ttcp
-
-ttcp-source: $(DL_DIR)/$(TTCP_SOURCE)
-
-ttcp-clean:
- rm -f $(TTCP_BUILD_DIR)/*.o $(TTCP_BUILD_DIR)/ttcp
-
-ttcp-dirclean:
- rm -rf $(TTCP_BUILD_DIR)
-
+++ /dev/null
-#############################################################
-#
-# uClibc (the C library)
-#
-#############################################################
-ifneq ($(strip $(USE_UCLIBC_SNAPSHOT)),)
-# Be aware that this changes daily....
-UCLIBC_DIR:=$(BUILD_DIR)/uClibc
-UCLIBC_SOURCE:=uClibc-$(strip $(USE_UCLIBC_SNAPSHOT)).tar.bz2
-UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots
-else
-UCLIBC_DIR:=$(BUILD_DIR)/uClibc-0.9.27
-UCLIBC_SOURCE:=uClibc-0.9.27.tar.bz2
-UCLIBC_SITE:=http://www.uclibc.org/downloads
-endif
-
-UCLIBC_TARGET_ARCH:=$(shell echo $(ARCH) | sed -e s'/-.*//' \
- -e 's/i.86/i386/' \
- -e 's/sparc.*/sparc/' \
- -e 's/arm.*/arm/g' \
- -e 's/m68k.*/m68k/' \
- -e 's/ppc/powerpc/g' \
- -e 's/v850.*/v850/g' \
- -e 's/sh64/sh/' \
- -e 's/sh[234]/sh/' \
- -e 's/mips.*/mips/' \
- -e 's/mipsel.*/mips/' \
- -e 's/cris.*/cris/' \
-)
-
-
-$(DL_DIR)/$(UCLIBC_SOURCE):
- $(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE)
-
-$(UCLIBC_DIR)/.unpacked: $(DL_DIR)/$(UCLIBC_SOURCE)
-ifeq ($(SOFT_FLOAT),true)
- # Make sure we have a soft float specs file for this arch
- if [ ! -f $(SOURCE_DIR)/specs-$(ARCH)-soft-float ] ; then \
- echo soft float configured but no specs file for this arch ; \
- /bin/false ; \
- fi;
-endif
- bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #(cd $(BUILD_DIR) ; ln -s $(DL_DIR)/uClibc)
- #-mkdir $(UCLIBC_DIR)
- #(cd $(DL_DIR)/uClibc && tar cf - .) | (cd $(UCLIBC_DIR) && tar xvfp - )
-ifeq ($(strip $(USE_UCLIBC_LDSO_0_9_24)),true)
- $(SOURCE_DIR)/patch-kernel.sh $(UCLIBC_DIR) $(SOURCE_DIR) uClibc-ldso-0.9.24.patch
-endif
- touch $(UCLIBC_DIR)/.unpacked
-
-$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked $(LINUX_DIR)/.configured
- $(SED) 's,^CROSS=.*,CROSS=$(TARGET_CROSS),g' $(UCLIBC_DIR)/Rules.mak
-ifeq ($(ENABLE_LOCALE),true)
- cp $(SOURCE_DIR)/uClibc.config-locale $(UCLIBC_DIR)/.config
-else
- cp $(SOURCE_DIR)/uClibc.config $(UCLIBC_DIR)/.config
-endif
- $(SED) 's,^.*TARGET_$(UCLIBC_TARGET_ARCH).*,TARGET_$(UCLIBC_TARGET_ARCH)=y,g' \
- $(UCLIBC_DIR)/.config
- $(SED) 's,^TARGET_ARCH.*,TARGET_ARCH=\"$(UCLIBC_TARGET_ARCH)\",g' $(UCLIBC_DIR)/.config
- $(SED) 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_DIR)\",g' \
- $(UCLIBC_DIR)/.config
- $(SED) 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \
- $(UCLIBC_DIR)/.config
- $(SED) 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \
- $(UCLIBC_DIR)/.config
- $(SED) 's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \
- $(UCLIBC_DIR)/.config
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
- $(SED) 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.config
-else
- $(SED) 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.config
-endif
- $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.config
-ifeq ($(strip $(SOFT_FLOAT)),true)
- $(SED) 's,.*HAS_FPU.*,HAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.config
-endif
- mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/include
- mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/lib
- mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/lib
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
- DEVEL_PREFIX=/usr/ \
- RUNTIME_PREFIX=$(TOOL_BUILD_DIR)/uClibc_dev/ \
- HOSTCC="$(HOSTCC)" \
- pregen install_dev;
- touch $(UCLIBC_DIR)/.configured
-
-$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.configured $(LIBFLOAT_TARGET)
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX= \
- DEVEL_PREFIX=$(REAL_GNU_TARGET_NAME)/ \
- RUNTIME_PREFIX=/ \
- HOSTCC="$(HOSTCC)" \
- all
-ifeq ($(strip $(USE_UCLIBC_LDSO_0_9_24)),true)
- #rm -rf $(UCLIBC_DIR)/ld-uClibc* $(UCLIBC_DIR)/libdl*
- $(MAKE) -C $(UCLIBC_DIR)/ldso-0.9.24 \
- PREFIX= \
- DEVEL_PREFIX=$(REAL_GNU_TARGET_NAME)/ \
- RUNTIME_PREFIX=/ \
- HOSTCC="$(HOSTCC)" \
- all shared
-endif
-
-$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX=$(STAGING_DIR)/ \
- DEVEL_PREFIX=$(REAL_GNU_TARGET_NAME)/ \
- RUNTIME_PREFIX=$(REAL_GNU_TARGET_NAME)/ \
- install_runtime
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX=$(STAGING_DIR)/ \
- DEVEL_PREFIX=$(REAL_GNU_TARGET_NAME)/ \
- RUNTIME_PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/ \
- install_dev
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX=$(STAGING_DIR) \
- HOSTCC="$(HOSTCC)" \
- utils install_utils
- # Clean up the host compiled utils...
- $(MAKE) -C $(UCLIBC_DIR)/utils clean
-
-ifneq ($(TARGET_DIR),)
-$(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX=$(TARGET_DIR) \
- DEVEL_PREFIX=/usr/ \
- RUNTIME_PREFIX=/ \
- install_runtime
-
-$(TARGET_DIR)/usr/bin/ldd: $(TARGET_DIR)/lib/libc.so.0
- $(MAKE) -C $(UCLIBC_DIR) $(TARGET_CONFIGURE_OPTS) \
- PREFIX=$(TARGET_DIR) utils install_utils
-
-UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd
-endif
-
-uclibc-configured: $(UCLIBC_DIR)/.configured
-
-uclibc: $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a \
- $(UCLIBC_TARGETS)
-
-uclibc-source: $(DL_DIR)/$(UCLIBC_SOURCE)
-
-uclibc-configured-source: uclibc-source
-
-uclibc-clean:
- -$(MAKE) -C $(UCLIBC_DIR) clean
- rm -f $(UCLIBC_DIR)/.config
-
-uclibc-dirclean:
- rm -rf $(UCLIBC_DIR)
-
-
-
-
-#############################################################
-#
-# uClibc for the target just needs its header files
-# and whatnot installed.
-#
-#############################################################
-
-$(TARGET_DIR)/usr/lib/libc.a: $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
- $(MAKE) -C $(UCLIBC_DIR) \
- PREFIX=$(TARGET_DIR) \
- DEVEL_PREFIX=/usr/ \
- RUNTIME_PREFIX=/ \
- install_dev
-
-ifeq ($(GCC_2_95_TOOLCHAIN),true)
-uclibc_target: gcc2_95 uclibc $(TARGET_DIR)/usr/lib/libc.a
-else
-uclibc_target: gcc3_3 uclibc $(TARGET_DIR)/usr/lib/libc.a
-endif
-
-uclibc_target-clean:
- rm -f $(TARGET_DIR)/include
-
-uclibc_target-dirclean:
- rm -f $(TARGET_DIR)/include
-
+++ /dev/null
-#############################################################
-#
-# uchdp DHCP client and/or server
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-UDHCP_SOURCE:=udhcp-0.9.8.tar.gz
-UDHCP_SITE:=http://udhcp.busybox.net/downloads/
-UDHCP_DIR:=$(BUILD_DIR)/udhcp-0.9.8
-
-$(DL_DIR)/$(UDHCP_SOURCE):
- $(WGET) -P $(DL_DIR) $(UDHCP_SITE)/$(UDHCP_SOURCE)
-
-udhcp-source: $(DL_DIR)/$(UDHCP_SOURCE)
-
-$(UDHCP_DIR)/.unpacked: $(DL_DIR)/$(UDHCP_SOURCE)
- zcat $(DL_DIR)/$(UDHCP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(UDHCP_DIR)/.unpacked
-
-#$(UDHCP_DIR)/.unpacked:
-# (cd $(BUILD_DIR); \
-# CVS_PASSFILE=$(CVS_PASSFILE) \
-# cvs -z3 -d:pserver:anonymous@busybox.net:/var/cvs co udhcp )
-# touch $(UDHCP_DIR)/.unpacked
-
-$(UDHCP_DIR)/udhcpc: $(UDHCP_DIR)/.unpacked
- $(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" prefix="$(TARGET_DIR)" -C $(UDHCP_DIR)
-
-$(TARGET_DIR)/sbin/udhcpc: $(UDHCP_DIR)/udhcpc
- $(SED) 's/pump/udhcpc/' $(TARGET_DIR)/etc/pcmcia/network*
- $(SED) 's/PUMP/UDHCPC/' $(TARGET_DIR)/etc/pcmcia/network*
- $(SED) 's/DHCP="n"/DHCP="y"/' $(TARGET_DIR)/etc/pcmcia/network*
- mkdir -p $(TARGET_DIR)/sbin
- rm -f $(TARGET_DIR)/sbin/udhcpc
- cp $(UDHCP_DIR)/udhcpc $(TARGET_DIR)/sbin/
- mkdir -p $(TARGET_DIR)/usr/share/udhcpc
- cp $(UDHCP_DIR)/samples/simple.script $(TARGET_DIR)/usr/share/udhcpc/default.script
- chmod a+x $(TARGET_DIR)/sbin/udhcpc $(TARGET_DIR)/usr/share/udhcpc/default.script
-
-udhcp: uclibc $(TARGET_DIR)/sbin/udhcpc
-
-udhcp-clean:
- rm -f $(TARGET_DIR)/sbin/udhcpc
- -$(MAKE) -C $(UDHCP_DIR) clean
-
-udhcp-dirclean:
- rm -rf $(UDHCP_DIR)
+++ /dev/null
-#############################################################
-#
-# util-linux
-#
-#############################################################
-UTIL-LINUX_SOURCE:=util-linux_2.12.orig.tar.gz
-UTIL-LINUX_SITE:=http://ftp.debian.org/debian/pool/main/u/util-linux/
-UTIL-LINUX_PATCH:=util-linux_2.12-6.diff.gz
-UTIL-LINUX_CAT:=zcat
-UTIL-LINUX_DIR:=$(BUILD_DIR)/util-linux-2.12
-UTIL-LINUX_BINARY:=$(UTIL-LINUX_DIR)/misc-utils/mcookie
-UTIL-LINUX_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/mcookie
-
-$(DL_DIR)/$(UTIL-LINUX_SOURCE):
- $(WGET) -P $(DL_DIR) $(UTIL-LINUX_SITE)/$(UTIL-LINUX_SOURCE)
-
-$(DL_DIR)/$(UTIL-LINUX_PATCH):
- $(WGET) -P $(DL_DIR) $(UTIL-LINUX_SITE)/$(UTIL-LINUX_PATCH)
-
-$(UTIL-LINUX_DIR)/.unpacked: $(DL_DIR)/$(UTIL-LINUX_SOURCE) $(DL_DIR)/$(UTIL-LINUX_PATCH)
- $(UTIL-LINUX_CAT) $(DL_DIR)/$(UTIL-LINUX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(UTIL-LINUX_CAT) $(DL_DIR)/$(UTIL-LINUX_PATCH) | patch -p1 -d $(UTIL-LINUX_DIR)
- cat $(SOURCE_DIR)/util-linux.patch | patch -p1 -d $(UTIL-LINUX_DIR)
- touch $(UTIL-LINUX_DIR)/.unpacked
-
-$(UTIL-LINUX_DIR)/.configured: $(UTIL-LINUX_DIR)/.unpacked
- (cd $(UTIL-LINUX_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- ARCH=$(ARCH) \
- );
- $(SED) "s,^INSTALLSUID=.*,INSTALLSUID=\\$$\(INSTALL\) -m \\$$\(BINMODE\)," \
- $(UTIL-LINUX_DIR)/MCONFIG
- $(SED) "s,^USE_TTY_GROUP=.*,USE_TTY_GROUP=no," $(UTIL-LINUX_DIR)/MCONFIG
- touch $(UTIL-LINUX_DIR)/.configured
-
-$(UTIL-LINUX_BINARY): $(UTIL-LINUX_DIR)/.configured
- $(MAKE) ARCH=$(ARCH) CC=$(TARGET_CC) -C $(UTIL-LINUX_DIR)
-
-$(UTIL-LINUX_TARGET_BINARY): $(UTIL-LINUX_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) USE_TTY_GROUP=no -C $(UTIL-LINUX_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-util-linux: uclibc $(UTIL-LINUX_TARGET_BINARY)
-
-util-linux-source: $(DL_DIR)/$(UTIL-LINUX_SOURCE)
-
-util-linux-clean:
- #There is no working 'uninstall' target. Just skip it...
- #$(MAKE) DESTDIR=$(TARGET_DIR) -C $(UTIL-LINUX_DIR) uninstall
- -$(MAKE) -C $(UTIL-LINUX_DIR) clean
-
-util-linux-dirclean:
- rm -rf $(UTIL-LINUX_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# valgrind
-#
-#############################################################
-
-VALGRIND_SITE:=http://developer.kde.org/~sewardj/
-VALGRIND_DIR:=$(BUILD_DIR)/valgrind-2.1.1
-VALGRIND_SOURCE:=valgrind-2.1.1.tar.bz2
-VALGRIND_PATCH:=$(SOURCE_DIR)/valgrind.patch
-
-$(DL_DIR)/$(VALGRIND_SOURCE):
- $(WGET) -P $(DL_DIR) $(VALGRIND_SITE)/$(VALGRIND_SOURCE)
-
-$(VALGRIND_DIR)/.unpacked: $(DL_DIR)/$(VALGRIND_SOURCE)
- bzcat $(DL_DIR)/$(VALGRIND_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(VALGRIND_DIR)/.unpacked
-
-$(VALGRIND_DIR)/.patched: $(VALGRIND_DIR)/.unpacked
- cat $(VALGRIND_PATCH) | patch -d $(VALGRIND_DIR) -p1
- touch $(VALGRIND_DIR)/.patched
-
-$(VALGRIND_DIR)/.configured: $(VALGRIND_DIR)/.patched
- (cd $(VALGRIND_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --without-uiout --disable-valgrindmi \
- --disable-tui --disable-valgrindtk \
- --without-x --without-included-gettext \
- );
- touch $(VALGRIND_DIR)/.configured
-
-$(VALGRIND_DIR)/coregrind/valgrind.so: $(VALGRIND_DIR)/.configured
- $(MAKE) -C $(VALGRIND_DIR)
- -$(STRIP) $(VALGRIND_DIR)/*.so*
- touch -c $(VALGRIND_DIR)/coregrind/valgrind.so
-
-$(TARGET_DIR)/usr/bin/valgrind: $(VALGRIND_DIR)/coregrind/valgrind.so
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- sharedstatedir=$(TARGET_DIR)/usr/com \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(VALGRIND_DIR) install;
- rm -rf $(TARGET_DIR)/usr/share/doc/valgrind
- #mkdir -p $(TARGET_DIR)/etc/default
- #cp $(VALGRIND_DIR)/valgrind.default $(TARGET_DIR)/etc/default/valgrind
- #mkdir -p $(TARGET_DIR)/usr/lib/valgrind
- #cp $(VALGRIND_DIR)/woody.supp $(TARGET_DIR)/usr/lib/valgrind/
- touch -c $(TARGET_DIR)/usr/bin/valgrind
-
-ifeq ($(ARCH),i386)
-valgrind: $(TARGET_DIR)/usr/bin/valgrind
-else
-valgrind:
-endif
-
-valgrind-source: $(DL_DIR)/$(VALGRIND_SOURCE)
-
-valgrind-clean:
- $(MAKE) -C $(VALGRIND_DIR) clean
-
-valgrind-dirclean:
- rm -rf $(VALGRIND_DIR)
-
+++ /dev/null
-# vsftpd
-
-VSFTPD_VERSION:=1.2.2
-VSFTPD_RELEASE:=1
-
-VSFTPD_SOURCE:=vsftpd-$(VSFTPD_VERSION).tar.gz
-VSFTPD_SITE:=ftp://vsftpd.beasts.org/users/cevans/
-VSFTPD_DIR:=$(BUILD_DIR)/vsftpd-$(VSFTPD_VERSION)
-VSFTPD_CAT:=zcat
-
-VSFTPD_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/vsftpd
-
-VSFTPD_BUILD_DIR := $(BUILD_DIR)/vsftpd_$(VSFTPD_VERSION)-$(VSFTPD_RELEASE)
-VSFTPD_IPK_DIR := $(OPENWRT_IPK_DIR)/vsftpd
-VSFTPD_IPK := $(VSFTPD_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(VSFTPD_SOURCE):
- $(WGET) -P $(DL_DIR) $(VSFTPD_SITE)/$(VSFTPD_SOURCE)
-
-
-$(VSFTPD_DIR)/.stamp-unpacked: $(DL_DIR)/$(VSFTPD_SOURCE)
- $(VSFTPD_CAT) $(DL_DIR)/$(VSFTPD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(VSFTPD_DIR)/.stamp-unpacked
-
-
-$(VSFTPD_DIR)/.stamp-patched: $(VSFTPD_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(VSFTPD_DIR) $(VSFTPD_PATCH_DIR)
-
- touch $(VSFTPD_DIR)/.stamp-patched
-
-
-$(VSFTPD_DIR)/.stamp-built: $(VSFTPD_DIR)/.stamp-patched
- cd $(VSFTPD_DIR) ; \
- $(MAKE) \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
-
- touch $(VSFTPD_DIR)/.stamp-built
-
-
-$(VSFTPD_BUILD_DIR): $(VSFTPD_DIR)/.stamp-built
- mkdir -p $(VSFTPD_BUILD_DIR)
-
- install -m0755 -d $(VSFTPD_BUILD_DIR)/usr/sbin
- install -m0755 $(VSFTPD_DIR)/vsftpd $(VSFTPD_BUILD_DIR)/usr/sbin/
-
- install -m0755 -d $(VSFTPD_BUILD_DIR)/etc
- install -m0644 $(VSFTPD_IPK_DIR)/root/etc/vsftpd.conf $(VSFTPD_BUILD_DIR)/etc/
- install -m0755 -d $(VSFTPD_BUILD_DIR)/etc/init.d
- install -m0755 $(VSFTPD_IPK_DIR)/root/etc/init.d/vsftpd $(VSFTPD_BUILD_DIR)/etc/init.d/
-
- $(STRIP) $(VSFTPD_BUILD_DIR)/usr/sbin/*
-
-
-$(VSFTPD_IPK): $(VSFTPD_BUILD_DIR)
- cp -a $(VSFTPD_IPK_DIR)/CONTROL $(VSFTPD_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(VSFTPD_VERSION)-$(VSFTPD_RELEASE)/" $(VSFTPD_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(VSFTPD_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(VSFTPD_BUILD_DIR)
-
-
-vsftpd-source: $(DL_DIR)/$(VSFTPD_SOURCE)
-
-vsftpd-ipk: ipkg-utils $(VSFTPD_IPK)
-
-vsftpd-clean:
- rm -rf $(VSFTPD_DIR)
- rm -rf $(VSFTPD_BUILD_DIR)
- rm -rf $(VSFTPD_IPK)
+++ /dev/null
-#############################################################
-#
-# vtun
-#
-# NOTE: Uses start-stop-daemon in init script, so be sure
-# to enable that within busybox
-#
-#############################################################
-VTUN_SOURCE:=vtun-2.6.tar.gz
-VTUN_SITE:=http://aleron.dl.sourceforge.net/sourceforge/vtun/
-VTUN_DIR:=$(BUILD_DIR)/vtun-2.6
-VTUN_CAT:=zcat
-VTUN_BINARY:=vtund
-VTUN_TARGET_BINARY:=usr/sbin/vtund
-VTUN_PATCH:=$(SOURCE_DIR)/vtun.patch
-
-$(DL_DIR)/$(VTUN_SOURCE):
- $(WGET) -P $(DL_DIR) $(VTUN_SITE)/$(VTUN_SOURCE)
-
-vtun-source: $(DL_DIR)/$(VTUN_SOURCE)
-
-$(VTUN_DIR)/.unpacked: $(DL_DIR)/$(VTUN_SOURCE)
- $(VTUN_CAT) $(DL_DIR)/$(VTUN_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(BUILD_DIR)/vtun $(VTUN_DIR)
- cat $(VTUN_PATCH) | patch -p1 -d $(VTUN_DIR)
- touch $(VTUN_DIR)/.unpacked
-
-$(VTUN_DIR)/.configured: $(VTUN_DIR)/.unpacked zlib lzo openssl
- (cd $(VTUN_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --with-ssl-headers=$(STAGING_DIR)/include/openssl \
- --with-lzo-headers=$(STAGING_DIR)/include \
- );
- touch $(VTUN_DIR)/.configured
-
-$(VTUN_DIR)/$(VTUN_BINARY): $(VTUN_DIR)/.configured
- $(MAKE) -C $(VTUN_DIR)
-
-$(TARGET_DIR)/$(VTUN_TARGET_BINARY): $(VTUN_DIR)/$(VTUN_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(VTUN_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-vtun: uclibc $(TARGET_DIR)/$(VTUN_TARGET_BINARY)
-
-vtun-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(VTUN_DIR) uninstall
- -$(MAKE) -C $(VTUN_DIR) clean
-
-vtun-dirclean:
- rm -rf $(VTUN_DIR)
-
+++ /dev/null
-######################################################
-#
-# An example makefile to fetch a package from sources
-# then fetch the ipkg updates required to the base package
-# extract the archives into the build tree
-# and then build the source
-#
-######################################################
-
-
-# For this example we'll use a fairly simple package that compiles easily
-# and has sources available for download at sourceforge
-WSHAPER=wondershaper-1.1a
-WSHAPER_TARGET=wondershaper-1.1a_mipsel.ipk
-WSHAPER_SITE=http://lartc.org/wondershaper
-WSHAPER_SOURCE=wondershaper-1.1a.tar.gz
-WSHAPERIPK_SITE=http://openwrt.rozeware.bc.ca/ipkg-dev
-WSHAPERIPK_SRC=wondershaper-1.1a-pkg.tgz
-
-
-
-# define a target for the master makefile
-wshaper-ipk: $(BUILD_DIR)/$(WSHAPER_TARGET)
-
-# We need to download sources if we dont have them
-$(DL_DIR)/$(WSHAPER_SOURCE) :
- $(WGET) -P $(DL_DIR) $(WSHAPER_SITE)/$(WSHAPER_SOURCE)
-
-# As well as the upstream package sources, we need the updates
-# for ipkg packaging
-$(DL_DIR)/$(WSHAPERIPK_SRC) :
- $(WGET) -P $(DL_DIR) $(WSHAPERIPK_SITE)/$(WSHAPERIPK_SRC)
-
-# if we have the sources, they do no good unless they are unpacked
-$(BUILD_DIR)/$(WSHAPER)/.unpacked: $(DL_DIR)/$(WSHAPER_SOURCE)
- tar -C $(BUILD_DIR) -zxf $(DL_DIR)/$(WSHAPER_SOURCE)
- touch $(BUILD_DIR)/$(WSHAPER)/.unpacked
-
-# with the upstream sources unpacked, they still dont do much good without
-# the ipkg control and rule files
-$(BUILD_DIR)/$(WSHAPER)/ipkg/control : $(BUILD_DIR)/$(WSHAPER)/.unpacked $(DL_DIR)/$(WSHAPERIPK_SRC)
- tar -C $(BUILD_DIR)/$(WSHAPER) -zxf $(DL_DIR)/$(WSHAPERIPK_SRC)
-
-# now that we have it all in place, just build it
-$(BUILD_DIR)/$(WSHAPER_TARGET): $(BUILD_DIR)/$(WSHAPER)/ipkg/control
- cd $(BUILD_DIR)/$(WSHAPER); $(IPKG_BUILDPACKAGE)
-
-
-
-
+++ /dev/null
-#############################################################
-#
-# wtools - Wireless Tools
-#
-#############################################################
-#
-WTOOLS_SOURCE_URL=http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux
-WTOOLS_SOURCE=wireless_tools.26.tar.gz
-WTOOLS_BUILD_DIR=$(BUILD_DIR)/wireless_tools.26
-
-$(DL_DIR)/$(WTOOLS_SOURCE):
- $(WGET) -P $(DL_DIR) $(WTOOLS_SOURCE_URL)/$(WTOOLS_SOURCE)
-
-$(WTOOLS_BUILD_DIR)/.unpacked: $(DL_DIR)/$(WTOOLS_SOURCE)
- zcat $(DL_DIR)/$(WTOOLS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(WTOOLS_BUILD_DIR)/.unpacked
-
-$(WTOOLS_BUILD_DIR)/.configured: $(WTOOLS_BUILD_DIR)/.unpacked
- touch $(WTOOLS_BUILD_DIR)/.configured
-
-$(WTOOLS_BUILD_DIR)/iwconfig: $(WTOOLS_BUILD_DIR)/.configured
- $(MAKE) -C $(WTOOLS_BUILD_DIR) \
- CC=$(TARGET_CC) CFLAGS="$(TARGET_CFLAGS)" \
- BUILD_SHARED=y # may want to make this an option
-
-$(TARGET_DIR)/sbin/iwconfig: $(WTOOLS_BUILD_DIR)/iwconfig
- # Copy The Wireless Tools
- cp -af $(WTOOLS_BUILD_DIR)/iwconfig $(TARGET_DIR)/sbin/
- cp -af $(WTOOLS_BUILD_DIR)/iwevent $(TARGET_DIR)/sbin/
- cp -af $(WTOOLS_BUILD_DIR)/iwgetid $(TARGET_DIR)/sbin/
- cp -af $(WTOOLS_BUILD_DIR)/iwlist $(TARGET_DIR)/sbin/
- cp -af $(WTOOLS_BUILD_DIR)/iwpriv $(TARGET_DIR)/sbin/
- cp -af $(WTOOLS_BUILD_DIR)/iwspy $(TARGET_DIR)/sbin/
- cp -af $(WTOOLS_BUILD_DIR)/libiw.so.26 $(TARGET_DIR)/lib
- $(STRIP) $(TARGET_DIR)/sbin/iwconfig $(TARGET_DIR)/sbin/iwevent \
- $(TARGET_DIR)/sbin/iwgetid $(TARGET_DIR)/sbin/iwlist \
- $(TARGET_DIR)/sbin/iwpriv $(TARGET_DIR)/sbin/iwspy \
- $(TARGET_DIR)/lib/libiw.so.26
-
-wtools: $(TARGET_DIR)/sbin/iwconfig
-
-wtools-source: $(DL_DIR)/$(WTOOLS_SOURCE)
-
-wtools-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(WTOOLS_BUILD_DIR) uninstall
- -$(MAKE) -C $(WTOOLS_BUILD_DIR) clean
-
-wtools-dirclean:
- rm -rf $(WTOOLS_BUILD_DIR)
-
+++ /dev/null
-#############################################################
-#
-# zlib
-#
-#############################################################
-ZLIB_SOURCE=zlib-1.1.4.tar.bz2
-ZLIB_SITE=http://aleron.dl.sourceforge.net/sourceforge/libpng
-ZLIB_DIR=$(BUILD_DIR)/zlib-1.1.4
-ZLIB_CFLAGS= $(TARGET_CFLAGS) -fPIC
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-ZLIB_CFLAGS+= -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-endif
-
-ZLIB_IPK_DIR=$(BUILD_DIR)/zlib-1.1.4-ipk
-ZLIB_IPK=$(BUILD_DIR)/zlib_1.1.4-1_mipsel.ipk
-
-$(DL_DIR)/$(ZLIB_SOURCE):
- $(WGET) -P $(DL_DIR) $(ZLIB_SITE)/$(ZLIB_SOURCE)
-
-$(ZLIB_DIR)/.source: $(DL_DIR)/$(ZLIB_SOURCE)
- bzcat $(DL_DIR)/$(ZLIB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(ZLIB_DIR)/.source
-
-$(ZLIB_DIR)/.configured: $(ZLIB_DIR)/.source
- (cd $(ZLIB_DIR); \
- ./configure \
- --shared \
- --prefix=/usr \
- --exec-prefix=$(STAGING_DIR)/usr/bin \
- --libdir=$(STAGING_DIR)/lib \
- --includedir=$(STAGING_DIR)/include \
- );
- touch $(ZLIB_DIR)/.configured;
-
-$(ZLIB_DIR)/libz.so.1.1.4: $(ZLIB_DIR)/.configured
- $(MAKE) LDSHARED="$(TARGET_CROSS)ld -shared -soname,libz.so.1" \
- CFLAGS="$(ZLIB_CFLAGS)" CC=$(TARGET_CC) -C $(ZLIB_DIR) all libz.a;
- touch -c $(ZLIB_DIR)/libz.so.1.1.4
-
-$(STAGING_DIR)/lib/libz.so.1.1.4: $(ZLIB_DIR)/libz.so.1.1.4
- cp -dpf $(ZLIB_DIR)/libz.a $(STAGING_DIR)/lib;
- cp -dpf $(ZLIB_DIR)/zlib.h $(STAGING_DIR)/include;
- cp -dpf $(ZLIB_DIR)/zconf.h $(STAGING_DIR)/include;
- cp -dpf $(ZLIB_DIR)/libz.so* $(STAGING_DIR)/lib;
- (cd $(STAGING_DIR)/lib; ln -fs libz.so.1.1.4 libz.so.1);
- chmod a-x $(STAGING_DIR)/lib/libz.so.1.1.4
- touch -c $(STAGING_DIR)/lib/libz.so.1.1.4
-
-$(TARGET_DIR)/lib/libz.so.1.1.4: $(STAGING_DIR)/lib/libz.so.1.1.4
- cp -dpf $(STAGING_DIR)/lib/libz.so* $(TARGET_DIR)/lib;
- -$(STRIP) $(TARGET_DIR)/lib/libz.so*
- touch -c $(TARGET_DIR)/lib/libz.so.1.1.4
-
-$(TARGET_DIR)/usr/lib/libz.a: $(STAGING_DIR)/lib/libz.so.1.1.4
- mkdir -p $(TARGET_DIR)/usr/include
- cp -dpf $(STAGING_DIR)/include/zlib.h $(TARGET_DIR)/usr/include/
- cp -dpf $(STAGING_DIR)/include/zconf.h $(TARGET_DIR)/usr/include/
- cp -dpf $(STAGING_DIR)/lib/libz.a $(TARGET_DIR)/usr/lib/
- rm -f $(TARGET_DIR)/lib/libz.so
- (cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libz.so.1.1.4 libz.so)
- touch -c $(TARGET_DIR)/usr/lib/libz.a
-
-zlib-headers: $(TARGET_DIR)/usr/lib/libz.a
-
-zlib: uclibc $(TARGET_DIR)/lib/libz.so.1.1.4
-
-$(ZLIB_IPK): uclibc $(STAGING_DIR)/lib/libz.so.1.1.4
- mkdir -p $(ZLIB_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/zlib/control $(ZLIB_IPK_DIR)/CONTROL/control
- mkdir -p $(ZLIB_IPK_DIR)/lib
- cp -dpf $(STAGING_DIR)/lib/libz.so* $(ZLIB_IPK_DIR)/lib;
- -$(STRIP) $(ZLIB_IPK_DIR)/lib/libz.so*
- touch -c $(ZLIB_IPK_DIR)/lib/libz.so.1.1.4
- cd $(BUILD_DIR); $(IPKG_BUILD) $(ZLIB_IPK_DIR)
-
-zlib-ipk: $(ZLIB_IPK)
-
-zlib-source: $(DL_DIR)/$(ZLIB_SOURCE)
-
-zlib-clean:
- rm -f $(TARGET_DIR)/lib/libz.so*
- -$(MAKE) -C $(ZLIB_DIR) clean
-
-zlib-dirclean:
- rm -rf $(ZLIB_DIR)
-
+++ /dev/null
-diff -urN STLport-4.5.3/Makefile STLport-4.5.3-devel/Makefile
---- STLport-4.5.3/Makefile Wed Dec 31 17:00:00 1969
-+++ STLport-4.5.3-devel/Makefile Tue Jan 7 15:28:08 2003
-@@ -0,0 +1,44 @@
-+# Makefile to compile stlport with uClibc
-+#
-+# Copyright (C) 2002 Erik Andersen <andersen@codepoet.org>
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+
-+ARCH:=i386
-+PREFIX:=/usr/$(ARCH)-linux-uclibc
-+CROSS:= $(PREFIX)/../bin/$(ARCH)-linux-uclibc-
-+CC=$(CROSS)gcc
-+CXX=$(CROSS)g++
-+AR = $(CROSS)ar
-+STRIP = $(CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded
-+.EXPORT_ALL_VARIABLES:
-+
-+all:
-+ rm -f lib/lib*
-+ make -C src -f gcc-uClibc.mak all
-+ (cd lib; rm -f libstdc++_debug.so; \
-+ ln -fs libstdc++.so.4.5 libstdc++.so; \
-+ ln -fs libstdc++.so.4.5 libstdc++.so.0;)
-+ $(STRIP) lib/libstdc++.so.4.5;
-+
-+clean:
-+ make -C src -f gcc-uClibc.mak clean
-+ rm -rf lib/*
-+
-+install:
-+ (cd lib; \
-+ cp -a libstdc++.a $(PREFIX)/lib; \
-+ cp -a libstdc++.so libstdc++.so.0 libstdc++.so.4.5 $(PREFIX)/lib;)
-+ cp -a stlport $(PREFIX)/include/c++
-diff -urN STLport-4.5.3/src/dll_main.cpp STLport-4.5.3-devel/src/dll_main.cpp
---- STLport-4.5.3/src/dll_main.cpp Sat Feb 2 16:11:56 2002
-+++ STLport-4.5.3-devel/src/dll_main.cpp Tue Jan 7 15:28:08 2003
-@@ -52,7 +52,7 @@
- # include <locale>
- # endif
-
--# if defined (_STLP_UNIX)
-+# if defined (_STLP_UNIX) && defined (_STLP_PTHREADS) && ! defined (_STLP_USE_UCLIBC)
- # define _STLP_HAS_PERTHREAD_ALLOCATOR
- # include <stl/_pthread_alloc.h>
- # endif
-diff -urN STLport-4.5.3/src/gcc-uClibc.mak STLport-4.5.3-devel/src/gcc-uClibc.mak
---- STLport-4.5.3/src/gcc-uClibc.mak Wed Dec 31 17:00:00 1969
-+++ STLport-4.5.3-devel/src/gcc-uClibc.mak Tue Jan 7 15:28:08 2003
-@@ -0,0 +1,61 @@
-+#
-+# Basename for libraries
-+#
-+LIB_BASENAME:=libstdc++
-+LIB_SHAREDNAME:=$(LIB_BASENAME).so
-+LIB_SHAREDNAME_FULL:=$(LIB_SHAREDNAME).0
-+
-+#
-+# guts for common stuff
-+#
-+#
-+LINK:=$(AR) -cr
-+#DYN_LINK:=$(CC) -fno-exceptions -lpthread -lm -shared -Wl,-soname=$(LIB_SHAREDNAME_FULL) -o
-+DYN_LINK:=$(CC) -fno-exceptions -shared -Wl,-soname=$(LIB_SHAREDNAME_FULL) -o
-+
-+OBJEXT=o
-+DYNEXT=so
-+STEXT=a
-+RM=rm -rf
-+PATH_SEP=/
-+MKDIR=mkdir -p
-+COMP=GCC$(ARCH)
-+INSTALL_STEP = install_unix
-+
-+all: release_dynamic release_static
-+#all: all_dynamic all_static symbolic_links
-+
-+include common_macros.mak
-+STLDEBUG_NAME:=$(LIB_BASENAME).debug
-+
-+# Lets disable exception support, since this saves over 200k...
-+DEFINE_FLAGS:= -fno-exceptions
-+#DEFINE_FLAGS:= -D_STLP_NO_EXCEPTIONS -fno-exceptions -DSTL_NO_EXCEPTIONS
-+
-+#DEFINE_FLAGS+= -D_STLP_USE_UCLIBC -D_STLP_NO_WCHAR_T \
-+# -DUSE_SPRINTF_INSTEAD -D_ISOC99_SOURCE
-+
-+WARNING_FLAGS:= -W -Wno-sign-compare -Wno-unused -Wno-uninitialized
-+INCLUDE_FLAGS = -I${STLPORT_DIR}
-+CXXFLAGS_COMMON = $(WARNING_FLAGS) $(DEFINE_FLAGS) $(INCLUDE_FLAGS)
-+
-+CXXFLAGS_RELEASE_static = $(CXXFLAGS_COMMON) -Os
-+CXXFLAGS_RELEASE_dynamic = $(CXXFLAGS_COMMON) -Os -fPIC
-+
-+CXXFLAGS_DEBUG_static = $(CXXFLAGS_COMMON) -O -g
-+CXXFLAGS_DEBUG_dynamic = $(CXXFLAGS_COMMON) -O -g -fPIC
-+
-+CXXFLAGS_STLDEBUG_static = $(CXXFLAGS_DEBUG_static) -D_STLP_DEBUG
-+CXXFLAGS_STLDEBUG_dynamic = $(CXXFLAGS_DEBUG_dynamic) -D_STLP_DEBUG -fPIC
-+
-+include common_percent_rules.mak
-+include common_rules.mak
-+
-+
-+#install: all
-+# cp -p $(LIB_TARGET) ${D_LIB_TARGET} ../lib
-+
-+#%.s: %.cpp
-+# $(CXX) $(CXXFLAGS) -O4 -S -pto $< -o $@
-+
-+
-diff -urN STLport-4.5.3/src/num_put_float.cpp STLport-4.5.3-devel/src/num_put_float.cpp
---- STLport-4.5.3/src/num_put_float.cpp Fri Jan 18 15:06:52 2002
-+++ STLport-4.5.3-devel/src/num_put_float.cpp Tue Jan 7 15:28:08 2003
-@@ -65,6 +65,12 @@
-
- # endif
-
-+# if defined(_STLP_USE_UCLIBC)
-+# define __USE_ISOC99 1
-+# include <math.h>
-+# include <float.h>
-+# endif
-+
- # include <cstdlib>
-
- #if defined (_MSC_VER) || defined (__MINGW32__) || defined (__BORLANDC__) || defined (__DJGPP) || defined (_STLP_SCO_OPENSERVER) || defined (__NCR_SVR)
-@@ -209,7 +215,7 @@
-
- #ifdef USE_SPRINTF_INSTEAD
-
--#elif defined (__hpux) || defined (__DJGPP) || ( defined(_STLP_USE_GLIBC) && ! defined (__MSL__) )
-+#elif defined (__hpux) || defined (__DJGPP) || ( defined(_STLP_USE_GLIBC) && ! defined (__MSL__) ) || defined (_STLP_USE_UCLIBC)
- # if defined (isfinite)
- inline bool _Stl_is_nan_or_inf(double x) { return !isfinite(x); }
- # else
-@@ -238,7 +244,7 @@
- }
- inline bool _Stl_is_neg_inf(double x) { return _fpclass(x) == _FPCLASS_NINF; }
- inline bool _Stl_is_neg_nan(double x) { return _isnan(x) && _copysign(1., x) < 0 ; }
--#elif defined(__MRC__) || defined(__SC__) //*TY 02/24/2000 - added support for MPW
-+#elif defined(__MRC__) || defined(__SC__)
- bool _Stl_is_nan_or_inf(double x) { return isnan(x) || !isfinite(x); }
- bool _Stl_is_inf(double x) { return !isfinite(x); }
- bool _Stl_is_neg_inf(double x) { return !isfinite(x) && signbit(x); }
-@@ -280,7 +286,7 @@
- inline char* _Stl_qfcvtR(long double x, int n, int* pt, int* sign, char* buf)
- { return fcvtbuf(x, n, pt, sign, buf); }
- # endif
--#elif defined (_STLP_USE_GLIBC)
-+#elif defined (_STLP_USE_GLIBC) || defined(_STLP_USE_UCLIBC)
- inline char* _Stl_ecvtR(double x, int n, int* pt, int* sign, char* buf)
- { return buf + ecvt_r(x, n, pt, sign, buf, NDIG+2); }
- inline char* _Stl_fcvtR(double x, int n, int* pt, int* sign, char* buf)
-diff -urN STLport-4.5.3/src/stdio_streambuf.cpp STLport-4.5.3-devel/src/stdio_streambuf.cpp
---- STLport-4.5.3/src/stdio_streambuf.cpp Thu Jan 10 11:41:52 2002
-+++ STLport-4.5.3-devel/src/stdio_streambuf.cpp Tue Jan 7 15:28:08 2003
-@@ -82,7 +82,7 @@
- _STLP_VENDOR_CSTD::fgetpos(_M_file, &pos);
- // added 21 june 00 mdb,rjf,wjs: glibc 2.2 changed fpos_t to be a struct instead
- // of a primitive type
--#if (defined(__GLIBC__) && ( (__GLIBC__ > 2) || ( (__GLIBC__ == 2) && (__GLIBC_MINOR__ >= 2) ) ) )
-+#if defined(_STLP_USE_UCLIBC) || (defined(__GLIBC__) && defined(_STLP_USE_GLIBC) && ( (__GLIBC__ > 2) || ( (__GLIBC__ == 2) && (__GLIBC_MINOR__ >= 2) ) ) )
- return pos_type((streamoff)pos.__pos);
- #elif defined(__ISCPP__) || defined(__MVS__) || (__OS400__)
- return pos_type(pos.__fpos_elem[ 0 ]);
-@@ -101,13 +101,16 @@
-
- // added 21 june 00 mdb,rjf,wjs: glibc 2.2 changed fpos_t to be a struct instead
- // of a primitive type
--#if (defined(__GLIBC__) && ( (__GLIBC__ > 2) || ( (__GLIBC__ == 2) && (__GLIBC_MINOR__ >= 2) ) ) )
-+#if (defined(__GLIBC__) && defined(_STLP_USE_GLIBC) && ( (__GLIBC__ > 2) || ( (__GLIBC__ == 2) && (__GLIBC_MINOR__ >= 2) ) ) )
- fpos_t p;
- p.__pos = pos;
- memset( &(p.__state), 0, sizeof(p.__state) );
- #elif defined(__MVS__) || (__OS400__)
- fpos_t p;
- p.__fpos_elem[0] = pos;
-+#elif defined(_STLP_USE_UCLIBC)
-+ fpos_t p;
-+ p.__pos = pos;
- #else
- fpos_t p(pos);
- #endif
-diff -urN STLport-4.5.3/stlport/config/_prolog.h STLport-4.5.3-devel/stlport/config/_prolog.h
---- STLport-4.5.3/stlport/config/_prolog.h Sun Oct 28 13:26:44 2001
-+++ STLport-4.5.3-devel/stlport/config/_prolog.h Tue Jan 7 15:28:08 2003
-@@ -1,3 +1,8 @@
-+/* Evil hack to make sure everything behaves itself */
-+#define _STLP_USE_UCLIBC
-+//#define _STLP_NO_WCHAR_T
-+//#define _ISOC99_SOURCE
-+//#define USE_SPRINTF_INSTEAD
-
- #if defined (_STLP_MSVC) || defined (__ICL) || defined (__BORLANDC__)
-
-diff -urN STLport-4.5.3/stlport/config/stl_gcc.h STLport-4.5.3-devel/stlport/config/stl_gcc.h
---- STLport-4.5.3/stlport/config/stl_gcc.h Thu Jan 10 11:41:58 2002
-+++ STLport-4.5.3-devel/stlport/config/stl_gcc.h Tue Jan 7 15:28:08 2003
-@@ -3,7 +3,7 @@
- */
-
- /* Systems having GLIBC installed have different traits */
--#if ! defined (_STLP_USE_GLIBC) && ( defined (__linux__) || defined (__CYGWIN__) )
-+#if ! defined (_STLP_USE_GLIBC) && ! defined (_STLP_USE_UCLIBC) && ( defined (__linux__) || defined (__CYGWIN__) )
- # define _STLP_USE_GLIBC
- #endif
-
-diff -urN STLport-4.5.3/stlport/cstdlib STLport-4.5.3-devel/stlport/cstdlib
---- STLport-4.5.3/stlport/cstdlib Thu Aug 23 15:51:54 2001
-+++ STLport-4.5.3-devel/stlport/cstdlib Tue Jan 7 15:28:08 2003
-@@ -55,9 +55,11 @@
- using _STLP_VENDOR_CSTD::atof;
- using _STLP_VENDOR_CSTD::atoi;
- using _STLP_VENDOR_CSTD::atol;
-+# ifndef _STLP_USE_UCLIBC
- using _STLP_VENDOR_CSTD::mblen;
- using _STLP_VENDOR_CSTD::mbstowcs;
- using _STLP_VENDOR_CSTD::mbtowc;
-+# endif
- using _STLP_VENDOR_CSTD::strtod;
- using _STLP_VENDOR_CSTD::strtol;
- using _STLP_VENDOR_CSTD::strtoul;
-diff -urN STLport-4.5.3/stlport/stl/_config.h STLport-4.5.3-devel/stlport/stl/_config.h
---- STLport-4.5.3/stlport/stl/_config.h Fri Jan 18 15:08:36 2002
-+++ STLport-4.5.3-devel/stlport/stl/_config.h Tue Jan 7 15:28:08 2003
-@@ -26,6 +26,16 @@
- #ifndef _STLP_CONFIG_H
- # define _STLP_CONFIG_H
-
-+/* Make the STLport headers provide uClibc support by default */
-+#define _STLP_NO_EXCEPTIONS 1
-+#define STL_NO_EXCEPTIONS 1
-+#define _STLP_USE_UCLIBC 1
-+//#define _STLP_NO_WCHAR_T 1
-+#define _STLP_NO_LONG_DOUBLE 1
-+#define USE_SPRINTF_INSTEAD 1
-+#define _ISOC99_SOURCE 1
-+#define _STLP_NO_ANACHRONISMS 1
-+
- /*
- * Purpose of this file :
- *
-@@ -164,7 +174,7 @@
- /* Operating system recognition (basic) */
- # if defined (__unix) || defined (__linux__) || defined (__QNX__) || defined (_AIX) || defined (__NetBSD__) || defined (__Lynx__)
- # define _STLP_UNIX 1
--# if defined (__linux__) && ! defined (_STLP_USE_GLIBC)
-+# if defined (__linux__) && ! defined (_STLP_USE_GLIBC) && ! defined (_STLP_USE_UCLIBC)
- # define _STLP_USE_GLIBC 1
- # endif
- # elif defined(macintosh) || defined (_MAC)
-diff -urN STLport-4.5.3/stlport/stl/_stdio_file.h STLport-4.5.3-devel/stlport/stl/_stdio_file.h
---- STLport-4.5.3/stlport/stl/_stdio_file.h Fri Jan 18 15:07:00 2002
-+++ STLport-4.5.3-devel/stlport/stl/_stdio_file.h Tue Jan 7 15:28:08 2003
-@@ -634,6 +634,112 @@
- }
- # define _STLP_FILE_I_O_IDENTICAL
-
-+#elif defined(_STLP_USE_UCLIBC)
-+
-+#if defined(__MASK_READING)
-+
-+inline int _FILE_fd(const FILE *__f) { return __f->__filedes; }
-+
-+// Returns a pointer to the beginning of the buffer.
-+inline char* _FILE_I_begin(const FILE *__f) { return (char*) __f->__bufstart; }
-+
-+// Returns the current read/write position within the buffer.
-+inline char* _FILE_I_next(const FILE *__f) { return (char*) __f->__bufpos; }
-+
-+// Returns a pointer immediately past the end of the buffer.
-+inline char* _FILE_I_end(const FILE *__f) { return (char*)__f->__bufend; }
-+
-+// Returns the number of characters remaining in the buffer, i.e.
-+// _FILE_[IO]_end(__f) - _FILE_[IO]_next(__f).
-+inline ptrdiff_t _FILE_I_avail(const FILE *__f)
-+ { return __f->__bufgetc_u - __f->__bufpos; }
-+
-+// Increments the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_preincr(FILE *__f) { return *(char*)(++__f->__bufpos); }
-+
-+// Increments the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_postincr(FILE *__f) { return *(char*)(__f->__bufpos++); }
-+
-+// Decrements the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_predecr(FILE *__f) { return *(char*)(--__f->__bufpos); }
-+
-+// Decrements the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_postdecr(FILE *__f) { return *(char*)(__f->__bufpos--); }
-+
-+// Increments the current read/write position by __n.
-+inline void _FILE_I_bump(FILE *__f, int __n) { __f->__bufpos += __n; }
-+
-+// Sets the beginning of the bufer to __begin, the current read/write
-+// position to __next, and the buffer's past-the-end pointer to __end.
-+// If any of those pointers is null, then all of them must be null.
-+inline void _FILE_I_set(FILE *__f, char* __begin, char* __next, char* __end)
-+{
-+ __f->__bufstart = (unsigned char*)__begin;
-+ __f->__bufpos = (unsigned char*)__next;
-+ __f->__bufend = (unsigned char*)__end;
-+ __f->__bufgetc_u = (unsigned char*)__begin;
-+ __f->__bufputc_u = (unsigned char*)__end;
-+}
-+
-+# define _STLP_FILE_I_O_IDENTICAL
-+
-+#else // Support old stdio for a little while.
-+
-+inline int _FILE_fd(const FILE *__f) { return __f->filedes; }
-+
-+// Returns a pointer to the beginning of the buffer.
-+inline char* _FILE_I_begin(const FILE *__f) { return (char*) __f->bufstart; }
-+
-+// Returns the current read/write position within the buffer.
-+inline char* _FILE_I_next(const FILE *__f) { return (char*) __f->bufpos; }
-+
-+// Returns a pointer immediately past the end of the buffer.
-+inline char* _FILE_I_end(const FILE *__f) { return (char*)__f->bufend; }
-+
-+// Returns the number of characters remaining in the buffer, i.e.
-+// _FILE_[IO]_end(__f) - _FILE_[IO]_next(__f).
-+inline ptrdiff_t _FILE_I_avail(const FILE *__f)
-+ { return __f->bufgetc - __f->bufpos; }
-+
-+// Increments the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_preincr(FILE *__f) { return *(char*)(++__f->bufpos); }
-+
-+// Increments the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_postincr(FILE *__f) { return *(char*)(__f->bufpos++); }
-+
-+// Decrements the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_predecr(FILE *__f) { return *(char*)(--__f->bufpos); }
-+
-+// Decrements the current read/write position by 1, returning the
-+// character at the old position.
-+inline char& _FILE_I_postdecr(FILE *__f) { return *(char*)(__f->bufpos--); }
-+
-+// Increments the current read/write position by __n.
-+inline void _FILE_I_bump(FILE *__f, int __n) { __f->bufpos += __n; }
-+
-+// Sets the beginning of the bufer to __begin, the current read/write
-+// position to __next, and the buffer's past-the-end pointer to __end.
-+// If any of those pointers is null, then all of them must be null.
-+inline void _FILE_I_set(FILE *__f, char* __begin, char* __next, char* __end)
-+{
-+ __f->bufstart = (unsigned char*)__begin;
-+ __f->bufpos = (unsigned char*)__next;
-+ __f->bufend = (unsigned char*)__end;
-+ __f->bufgetc = (unsigned char*)__begin;
-+ __f->bufputc = (unsigned char*)__end;
-+}
-+
-+# define _STLP_FILE_I_O_IDENTICAL
-+
-+#endif
-+
- #else /* A C library that we don't have an implementation for. */
-
- # error The C++ I/O library is not configured for this compiler
-diff -urN STLport-4.5.3/stlport/stl/c_locale.h STLport-4.5.3-devel/stlport/stl/c_locale.h
---- STLport-4.5.3/stlport/stl/c_locale.h Fri Jan 18 15:07:00 2002
-+++ STLport-4.5.3-devel/stlport/stl/c_locale.h Wed Jan 8 10:58:10 2003
-@@ -401,6 +401,21 @@
- # define _Locale_SPACE _S
- # define _Locale_PRINT (_P | _U | _L | _N | _B)
- # define _Locale_ALPHA (_U | _L)
-+
-+# elif defined(_STLP_USE_UCLIBC) /* linux, using the gnu compiler */
-+
-+# define _Locale_CNTRL _IScntrl
-+# define _Locale_UPPER _ISupper
-+# define _Locale_LOWER _ISlower
-+# define _Locale_DIGIT _ISdigit
-+# define _Locale_XDIGIT _ISxdigit
-+# define _Locale_PUNCT _ISpunct
-+# define _Locale_SPACE _ISspace
-+# define _Locale_PRINT _ISprint
-+# define _Locale_ALPHA _ISalpha
-+
-+#else
-+# error Unknown Locale
- #endif
-
- # endif /* _STLP_C_LOCALE_H */
+++ /dev/null
-diff -urN binutils-2.14.90.0.7.orig/bfd/ChangeLog binutils-2.14.90.0.7/bfd/ChangeLog
---- binutils-2.14.90.0.7.orig/bfd/ChangeLog 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/ChangeLog 2004-04-20 01:26:12.000000000 -0600
-@@ -1,3 +1,34 @@
-+2003-10-29 Daniel Jacobowitz <drow@mvista.com>
-+
-+ * elf32-arm.h (elf32_arm_final_link_relocate): Move check for
-+ SEC_ALLOC.
-+
-+2003-10-29 Philip Blundell <philb@gnu.org>
-+
-+ * elf32-arm.h (elf32_arm_plt0_entry, elf32_arm_plt_entry): New
-+ code sequence.
-+ (PLT_HEADER_SIZE): New.
-+ (struct elf32_arm_pcrel_relocs_copied): Rename to ...
-+ (struct elf32_arm_relocs_copied): ... this. Count both
-+ pcrel and non-pcrel relocs. All uses updated.
-+ (struct elf32_arm_link_hash_table): Add pointers to dynamic linker
-+ sections and symbol/section mapping cache.
-+ (create_got_section): New.
-+ (elf32_arm_create_dynamic_sections): New.
-+ (elf_backend_create_dynamic_sections): Use it.
-+ (elf32_arm_final_link_relocate): Support garbage collection of relocs.
-+ (elf32_arm_check_relocs): Likewise.
-+ (elf32_arm_adjust_dynamic_symbol): Likewise.
-+ (elf32_arm_copy_indirect_symbol): New.
-+ (elf32_arm_link_hash_table_create): Initialise new fields.
-+ (elf32_arm_gc_sweep_hook): Implement.
-+ (elf32_arm_discard_copies): Delete.
-+ (elf32_arm_finish_dynamic_symbol): Use new PLT code.
-+ (elf32_arm_finish_dynamic_sections): Likewise.
-+ (elf_backend_can_refcount): Define.
-+ (elf_backend_copy_indirect_symbol): Likewise.
-+ (elf_backend_plt_header_size): Set to PLT_HEADER_SIZE.
-+
- 2003-10-29 Alan Modra <amodra@bigpond.net.au>
-
- * elf64-ppc.c (elf_backend_grok_prstatus): Define.
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf-bfd.h binutils-2.14.90.0.7/bfd/elf-bfd.h
---- binutils-2.14.90.0.7.orig/bfd/elf-bfd.h 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf-bfd.h 2004-04-20 01:26:12.000000000 -0600
-@@ -1303,7 +1303,7 @@
- extern enum elf_reloc_type_class _bfd_elf_reloc_type_class
- (const Elf_Internal_Rela *);
- extern bfd_vma _bfd_elf_rela_local_sym
-- (bfd *, Elf_Internal_Sym *, asection *, Elf_Internal_Rela *);
-+ (bfd *, Elf_Internal_Sym *, asection **, Elf_Internal_Rela *);
- extern bfd_vma _bfd_elf_rel_local_sym
- (bfd *, Elf_Internal_Sym *, asection **, bfd_vma);
- extern bfd_vma _bfd_elf_section_offset
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf-hppa.h binutils-2.14.90.0.7/bfd/elf-hppa.h
---- binutils-2.14.90.0.7.orig/bfd/elf-hppa.h 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf-hppa.h 2004-04-20 01:26:12.000000000 -0600
-@@ -1346,11 +1346,11 @@
- /* This is a local symbol. */
- sym = local_syms + r_symndx;
- sym_sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sym_sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sym_sec, rel);
-
- /* If this symbol has an entry in the PA64 dynamic hash
- table, then get it. */
-- dyn_name = get_dyn_name (input_section, h, rel,
-+ dyn_name = get_dyn_name (input_bfd, h, rel,
- &dynh_buf, &dynh_buflen);
- dyn_h = elf64_hppa_dyn_hash_lookup (&hppa_info->dyn_hash_table,
- dyn_name, FALSE, FALSE);
-@@ -1373,7 +1373,7 @@
-
- /* If this symbol has an entry in the PA64 dynamic hash
- table, then get it. */
-- dyn_name = get_dyn_name (input_section, h, rel,
-+ dyn_name = get_dyn_name (input_bfd, h, rel,
- &dynh_buf, &dynh_buflen);
- dyn_h = elf64_hppa_dyn_hash_lookup (&hppa_info->dyn_hash_table,
- dyn_name, FALSE, FALSE);
-@@ -1410,7 +1410,7 @@
-
- /* If this symbol has an entry in the PA64 dynamic hash
- table, then get it. */
-- dyn_name = get_dyn_name (input_section, h, rel,
-+ dyn_name = get_dyn_name (input_bfd, h, rel,
- &dynh_buf, &dynh_buflen);
- dyn_h = elf64_hppa_dyn_hash_lookup (&hppa_info->dyn_hash_table,
- dyn_name, FALSE, FALSE);
-@@ -1426,7 +1426,7 @@
- }
- else if (h->root.type == bfd_link_hash_undefweak)
- {
-- dyn_name = get_dyn_name (input_section, h, rel,
-+ dyn_name = get_dyn_name (input_bfd, h, rel,
- &dynh_buf, &dynh_buflen);
- dyn_h = elf64_hppa_dyn_hash_lookup (&hppa_info->dyn_hash_table,
- dyn_name, FALSE, FALSE);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf-m10200.c binutils-2.14.90.0.7/bfd/elf-m10200.c
---- binutils-2.14.90.0.7.orig/bfd/elf-m10200.c 2003-07-23 09:08:08.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf-m10200.c 2004-04-20 01:26:12.000000000 -0600
-@@ -373,7 +373,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf-m10300.c binutils-2.14.90.0.7/bfd/elf-m10300.c
---- binutils-2.14.90.0.7.orig/bfd/elf-m10300.c 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf-m10300.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1574,7 +1574,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf.c binutils-2.14.90.0.7/bfd/elf.c
---- binutils-2.14.90.0.7.orig/bfd/elf.c 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf.c 2004-04-20 01:26:12.000000000 -0600
-@@ -7367,9 +7367,10 @@
- bfd_vma
- _bfd_elf_rela_local_sym (bfd *abfd,
- Elf_Internal_Sym *sym,
-- asection *sec,
-+ asection **psec,
- Elf_Internal_Rela *rel)
- {
-+ asection *sec = *psec;
- bfd_vma relocation;
-
- relocation = (sec->output_section->vma
-@@ -7379,16 +7380,14 @@
- && ELF_ST_TYPE (sym->st_info) == STT_SECTION
- && sec->sec_info_type == ELF_INFO_TYPE_MERGE)
- {
-- asection *msec;
--
-- msec = sec;
- rel->r_addend =
-- _bfd_merged_section_offset (abfd, &msec,
-+ _bfd_merged_section_offset (abfd, psec,
- elf_section_data (sec)->sec_info,
- sym->st_value + rel->r_addend,
-- 0)
-- - relocation;
-- rel->r_addend += msec->output_section->vma + msec->output_offset;
-+ 0);
-+ sec = *psec;
-+ rel->r_addend -= relocation;
-+ rel->r_addend += sec->output_section->vma + sec->output_offset;
- }
- return relocation;
- }
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-arm.h binutils-2.14.90.0.7/bfd/elf32-arm.h
---- binutils-2.14.90.0.7.orig/bfd/elf32-arm.h 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-arm.h 2004-04-20 01:26:12.000000000 -0600
-@@ -84,6 +84,12 @@
- static void arm_add_to_rel
- PARAMS ((bfd *, bfd_byte *, reloc_howto_type *, bfd_signed_vma));
- #endif
-+static bfd_boolean allocate_dynrelocs
-+ PARAMS ((struct elf_link_hash_entry *h, PTR inf));
-+static bfd_boolean create_got_section
-+ PARAMS ((bfd * dynobj, struct bfd_link_info * info));
-+static bfd_boolean elf32_arm_create_dynamic_sections
-+ PARAMS ((bfd * dynobj, struct bfd_link_info * info));
- static enum elf_reloc_type_class elf32_arm_reloc_type_class
- PARAMS ((const Elf_Internal_Rela *));
- static bfd_boolean elf32_arm_object_p
-@@ -119,6 +125,12 @@
- section. */
- #define ELF_DYNAMIC_INTERPRETER "/usr/lib/ld.so.1"
-
-+#ifdef FOUR_WORD_PLT
-+
-+/* The size in bytes of the special first entry in the procedure
-+ linkage table. */
-+#define PLT_HEADER_SIZE 16
-+
- /* The size in bytes of an entry in the procedure linkage table. */
- #define PLT_ENTRY_SIZE 16
-
-@@ -126,23 +138,56 @@
- this. It is set up so that any shared library function that is
- called before the relocation has been set up calls the dynamic
- linker first. */
--static const bfd_vma elf32_arm_plt0_entry [PLT_ENTRY_SIZE / 4] =
-+static const bfd_vma elf32_arm_plt0_entry [PLT_HEADER_SIZE / 4] =
- {
-- 0xe52de004, /* str lr, [sp, #-4]! */
-- 0xe59fe010, /* ldr lr, [pc, #16] */
-- 0xe08fe00e, /* add lr, pc, lr */
-- 0xe5bef008 /* ldr pc, [lr, #8]! */
-+ 0xe52de004, /* str lr, [sp, #-4]! */
-+ 0xe59fe010, /* ldr lr, [pc, #16] */
-+ 0xe08fe00e, /* add lr, pc, lr */
-+ 0xe5bef008, /* ldr pc, [lr, #8]! */
- };
-
- /* Subsequent entries in a procedure linkage table look like
- this. */
- static const bfd_vma elf32_arm_plt_entry [PLT_ENTRY_SIZE / 4] =
-- {
-- 0xe59fc004, /* ldr ip, [pc, #4] */
-- 0xe08fc00c, /* add ip, pc, ip */
-- 0xe59cf000, /* ldr pc, [ip] */
-- 0x00000000 /* offset to symbol in got */
-- };
-+ {
-+ 0xe28fc600, /* add ip, pc, #NN */
-+ 0xe28cca00, /* add ip, ip, #NN */
-+ 0xe5bcf000, /* ldr pc, [ip, #NN]! */
-+ 0x00000000, /* unused */
-+ };
-+
-+#else
-+
-+/* The size in bytes of the special first entry in the procedure
-+ linkage table. */
-+#define PLT_HEADER_SIZE 20
-+
-+/* The size in bytes of an entry in the procedure linkage table. */
-+#define PLT_ENTRY_SIZE 12
-+
-+/* The first entry in a procedure linkage table looks like
-+ this. It is set up so that any shared library function that is
-+ called before the relocation has been set up calls the dynamic
-+ linker first. */
-+static const bfd_vma elf32_arm_plt0_entry [PLT_HEADER_SIZE / 4] =
-+ {
-+ 0xe52de004, /* str lr, [sp, #-4]! */
-+ 0xe59fe004, /* ldr lr, [pc, #4] */
-+ 0xe08fe00e, /* add lr, pc, lr */
-+ 0xe5bef008, /* ldr pc, [lr, #8]! */
-+ 0x00000000, /* &GOT[0] - . */
-+ };
-+
-+/* Subsequent entries in a procedure linkage table look like
-+ this. */
-+static const bfd_vma elf32_arm_plt_entry [PLT_ENTRY_SIZE / 4] =
-+ {
-+ 0xe28fc600, /* add ip, pc, #0xNN00000 */
-+ 0xe28cca00, /* add ip, ip, #0xNN000 */
-+ 0xe5bcf000, /* ldr pc, [ip, #0xNNN]! */
-+ };
-+
-+#endif
-
- /* The ARM linker needs to keep track of the number of relocs that it
- decides to copy in check_relocs for each symbol. This is so that
-@@ -152,14 +197,16 @@
-
- /* This structure keeps track of the number of PC relative relocs we
- have copied for a given symbol. */
--struct elf32_arm_pcrel_relocs_copied
-+struct elf32_arm_relocs_copied
- {
- /* Next section. */
-- struct elf32_arm_pcrel_relocs_copied * next;
-+ struct elf32_arm_relocs_copied * next;
- /* A section in dynobj. */
- asection * section;
- /* Number of relocs copied in this section. */
- bfd_size_type count;
-+ /* Number of relocs copied in this section. */
-+ bfd_size_type pc_count;
- };
-
- /* Arm ELF linker hash entry. */
-@@ -168,13 +215,9 @@
- struct elf_link_hash_entry root;
-
- /* Number of PC relative relocs copied for this symbol. */
-- struct elf32_arm_pcrel_relocs_copied * pcrel_relocs_copied;
-+ struct elf32_arm_relocs_copied * relocs_copied;
- };
-
--/* Declare this now that the above structures are defined. */
--static bfd_boolean elf32_arm_discard_copies
-- PARAMS ((struct elf32_arm_link_hash_entry *, PTR));
--
- /* Traverse an arm ELF linker hash table. */
- #define elf32_arm_link_hash_traverse(table, func, info) \
- (elf_link_hash_traverse \
-@@ -204,6 +247,18 @@
- /* A boolean indicating whether knowledge of the ARM's pipeline
- length should be applied by the linker. */
- int no_pipeline_knowledge;
-+
-+ /* Short-cuts to get to dynamic linker sections. */
-+ asection *sgot;
-+ asection *sgotplt;
-+ asection *srelgot;
-+ asection *splt;
-+ asection *srelplt;
-+ asection *sdynbss;
-+ asection *srelbss;
-+
-+ /* Small local sym to section mapping cache. */
-+ struct sym_sec_cache sym_sec;
- };
-
- /* Create an entry in an ARM ELF linker hash table. */
-@@ -231,11 +286,121 @@
- _bfd_elf_link_hash_newfunc ((struct bfd_hash_entry *) ret,
- table, string));
- if (ret != (struct elf32_arm_link_hash_entry *) NULL)
-- ret->pcrel_relocs_copied = NULL;
-+ ret->relocs_copied = NULL;
-
- return (struct bfd_hash_entry *) ret;
- }
-
-+/* Create .got, .gotplt, and .rel.got sections in DYNOBJ, and set up
-+ shortcuts to them in our hash table. */
-+
-+static bfd_boolean
-+create_got_section (dynobj, info)
-+ bfd *dynobj;
-+ struct bfd_link_info *info;
-+{
-+ struct elf32_arm_link_hash_table *htab;
-+
-+ if (! _bfd_elf_create_got_section (dynobj, info))
-+ return FALSE;
-+
-+ htab = elf32_arm_hash_table (info);
-+ htab->sgot = bfd_get_section_by_name (dynobj, ".got");
-+ htab->sgotplt = bfd_get_section_by_name (dynobj, ".got.plt");
-+ if (!htab->sgot || !htab->sgotplt)
-+ abort ();
-+
-+ htab->srelgot = bfd_make_section (dynobj, ".rel.got");
-+ if (htab->srelgot == NULL
-+ || ! bfd_set_section_flags (dynobj, htab->srelgot,
-+ (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS
-+ | SEC_IN_MEMORY | SEC_LINKER_CREATED
-+ | SEC_READONLY))
-+ || ! bfd_set_section_alignment (dynobj, htab->srelgot, 2))
-+ return FALSE;
-+ return TRUE;
-+}
-+
-+/* Create .plt, .rel.plt, .got, .got.plt, .rel.got, .dynbss, and
-+ .rel.bss sections in DYNOBJ, and set up shortcuts to them in our
-+ hash table. */
-+
-+static bfd_boolean
-+elf32_arm_create_dynamic_sections (dynobj, info)
-+ bfd *dynobj;
-+ struct bfd_link_info *info;
-+{
-+ struct elf32_arm_link_hash_table *htab;
-+
-+ htab = elf32_arm_hash_table (info);
-+ if (!htab->sgot && !create_got_section (dynobj, info))
-+ return FALSE;
-+
-+ if (!_bfd_elf_create_dynamic_sections (dynobj, info))
-+ return FALSE;
-+
-+ htab->splt = bfd_get_section_by_name (dynobj, ".plt");
-+ htab->srelplt = bfd_get_section_by_name (dynobj, ".rel.plt");
-+ htab->sdynbss = bfd_get_section_by_name (dynobj, ".dynbss");
-+ if (!info->shared)
-+ htab->srelbss = bfd_get_section_by_name (dynobj, ".rel.bss");
-+
-+ if (!htab->splt || !htab->srelplt || !htab->sdynbss
-+ || (!info->shared && !htab->srelbss))
-+ abort ();
-+
-+ return TRUE;
-+}
-+
-+/* Copy the extra info we tack onto an elf_link_hash_entry. */
-+
-+static void
-+elf32_arm_copy_indirect_symbol (const struct elf_backend_data *bed,
-+ struct elf_link_hash_entry *dir,
-+ struct elf_link_hash_entry *ind)
-+{
-+ struct elf32_arm_link_hash_entry *edir, *eind;
-+
-+ edir = (struct elf32_arm_link_hash_entry *) dir;
-+ eind = (struct elf32_arm_link_hash_entry *) ind;
-+
-+ if (eind->relocs_copied != NULL)
-+ {
-+ if (edir->relocs_copied != NULL)
-+ {
-+ struct elf32_arm_relocs_copied **pp;
-+ struct elf32_arm_relocs_copied *p;
-+
-+ if (ind->root.type == bfd_link_hash_indirect)
-+ abort ();
-+
-+ /* Add reloc counts against the weak sym to the strong sym
-+ list. Merge any entries against the same section. */
-+ for (pp = &eind->relocs_copied; (p = *pp) != NULL; )
-+ {
-+ struct elf32_arm_relocs_copied *q;
-+
-+ for (q = edir->relocs_copied; q != NULL; q = q->next)
-+ if (q->section == p->section)
-+ {
-+ q->pc_count += p->pc_count;
-+ q->count += p->count;
-+ *pp = p->next;
-+ break;
-+ }
-+ if (q == NULL)
-+ pp = &p->next;
-+ }
-+ *pp = edir->relocs_copied;
-+ }
-+
-+ edir->relocs_copied = eind->relocs_copied;
-+ eind->relocs_copied = NULL;
-+ }
-+
-+ _bfd_elf_link_hash_copy_indirect (bed, dir, ind);
-+}
-+
- /* Create an ARM elf linker hash table. */
-
- static struct bfd_link_hash_table *
-@@ -256,10 +421,18 @@
- return NULL;
- }
-
-+ ret->sgot = NULL;
-+ ret->sgotplt = NULL;
-+ ret->srelgot = NULL;
-+ ret->splt = NULL;
-+ ret->srelplt = NULL;
-+ ret->sdynbss = NULL;
-+ ret->srelbss = NULL;
- ret->thumb_glue_size = 0;
- ret->arm_glue_size = 0;
- ret->bfd_of_glue_owner = NULL;
- ret->no_pipeline_knowledge = 0;
-+ ret->sym_sec.abfd = NULL;
-
- return &ret->root.root;
- }
-@@ -1134,16 +1307,21 @@
- #ifndef OLD_ARM_ABI
- case R_ARM_XPC25:
- #endif
-+ /* r_symndx will be zero only for relocs against symbols
-+ from removed linkonce sections, or sections discarded by
-+ a linker script. */
-+ if (r_symndx == 0)
-+ return bfd_reloc_ok;
-+
- /* When generating a shared object, these relocations are copied
- into the output file to be resolved at run time. */
-- if (info->shared
-- && r_symndx != 0
-- && (r_type != R_ARM_PC24
-- || (h != NULL
-- && h->dynindx != -1
-- && (! info->symbolic
-- || (h->elf_link_hash_flags
-- & ELF_LINK_HASH_DEF_REGULAR) == 0))))
-+ if ((info->shared
-+ && (input_section->flags & SEC_ALLOC)
-+ && (h == NULL
-+ || ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
-+ || h->root.type != bfd_link_hash_undefweak)
-+ && (r_type != R_ARM_PC24
-+ || !SYMBOL_CALLS_LOCAL (info, h))))
- {
- Elf_Internal_Rela outrel;
- bfd_byte *loc;
-@@ -1184,30 +1362,19 @@
-
- if (skip)
- memset (&outrel, 0, sizeof outrel);
-- else if (r_type == R_ARM_PC24)
-- {
-- BFD_ASSERT (h != NULL && h->dynindx != -1);
-- if ((input_section->flags & SEC_ALLOC) == 0)
-- relocate = TRUE;
-- outrel.r_info = ELF32_R_INFO (h->dynindx, R_ARM_PC24);
-- }
-+ else if (h != NULL
-+ && h->dynindx != -1
-+ && (r_type == R_ARM_PC24
-+ || !info->shared
-+ || !info->symbolic
-+ || (h->elf_link_hash_flags
-+ & ELF_LINK_HASH_DEF_REGULAR) == 0))
-+ outrel.r_info = ELF32_R_INFO (h->dynindx, r_type);
- else
- {
-- if (h == NULL
-- || ((info->symbolic || h->dynindx == -1)
-- && (h->elf_link_hash_flags
-- & ELF_LINK_HASH_DEF_REGULAR) != 0))
-- {
-- relocate = TRUE;
-- outrel.r_info = ELF32_R_INFO (0, R_ARM_RELATIVE);
-- }
-- else
-- {
-- BFD_ASSERT (h->dynindx != -1);
-- if ((input_section->flags & SEC_ALLOC) == 0)
-- relocate = TRUE;
-- outrel.r_info = ELF32_R_INFO (h->dynindx, R_ARM_ABS32);
-- }
-+ /* This symbol is local, or marked to become local. */
-+ relocate = TRUE;
-+ outrel.r_info = ELF32_R_INFO (0, R_ARM_RELATIVE);
- }
-
- loc = sreloc->contents;
-@@ -1617,16 +1784,17 @@
- if (h != NULL)
- {
- bfd_vma off;
-- bfd_boolean dyn = elf_hash_table (info)->dynamic_sections_created;
-+ bfd_boolean dyn;
-
- off = h->got.offset;
- BFD_ASSERT (off != (bfd_vma) -1);
-+ dyn = globals->root.dynamic_sections_created;
-
-- if (!WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, info->shared, h)
-+ if (! WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, info->shared, h)
- || (info->shared
-- && (info->symbolic || h->dynindx == -1
-- || (h->elf_link_hash_flags & ELF_LINK_FORCED_LOCAL))
-- && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR)))
-+ && SYMBOL_REFERENCES_LOCAL (info, h))
-+ || (ELF_ST_VISIBILITY (h->other)
-+ && h->root.type == bfd_link_hash_undefweak))
- {
- /* This is actually a static link, or it is a -Bsymbolic link
- and the symbol is defined locally. We must initialize this
-@@ -1712,7 +1880,8 @@
- contents, rel->r_offset, value,
- (bfd_vma) 0);
-
-- if (h->plt.offset == (bfd_vma) -1)
-+ if (h->plt.offset == (bfd_vma) -1
-+ || globals->splt == NULL)
- /* We didn't make a PLT entry for this symbol. This
- happens when statically linking PIC code, or when
- using -Bsymbolic. */
-@@ -1958,7 +2127,7 @@
- bfd_put_32 (input_bfd, value, contents + rel->r_offset);
- }
- #else
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- #endif
- }
- else
-@@ -1983,9 +2152,10 @@
- case R_ARM_THM_PC22:
- if (info->shared
- && (
-- (!info->symbolic && h->dynindx != -1)
-+ (!info->symbolic && h->dynindx != -1)
- || (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0
- )
-+ && ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
- && ((input_section->flags & SEC_ALLOC) != 0
- /* DWARF will emit R_ARM_ABS32 relocations in its
- sections against symbols defined externally
-@@ -2603,7 +2773,82 @@
- asection *sec ATTRIBUTE_UNUSED;
- const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED;
- {
-- /* We don't support garbage collection of GOT and PLT relocs yet. */
-+ Elf_Internal_Shdr *symtab_hdr;
-+ struct elf_link_hash_entry **sym_hashes;
-+ bfd_signed_vma *local_got_refcounts;
-+ const Elf_Internal_Rela *rel, *relend;
-+ unsigned long r_symndx;
-+ struct elf_link_hash_entry *h;
-+
-+ elf_section_data (sec)->local_dynrel = NULL;
-+
-+ symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
-+ sym_hashes = elf_sym_hashes (abfd);
-+ local_got_refcounts = elf_local_got_refcounts (abfd);
-+
-+ relend = relocs + sec->reloc_count;
-+ for (rel = relocs; rel < relend; rel++)
-+ switch (ELF32_R_TYPE (rel->r_info))
-+ {
-+ case R_ARM_GOT32:
-+ r_symndx = ELF32_R_SYM (rel->r_info);
-+ if (r_symndx >= symtab_hdr->sh_info)
-+ {
-+ h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-+ if (h->got.refcount > 0)
-+ h->got.refcount -= 1;
-+ }
-+ else if (local_got_refcounts != NULL)
-+ {
-+ if (local_got_refcounts[r_symndx] > 0)
-+ local_got_refcounts[r_symndx] -= 1;
-+ }
-+ break;
-+
-+ case R_ARM_ABS32:
-+ case R_ARM_REL32:
-+ case R_ARM_PC24:
-+ r_symndx = ELF32_R_SYM (rel->r_info);
-+ if (r_symndx >= symtab_hdr->sh_info)
-+ {
-+ struct elf32_arm_link_hash_entry *eh;
-+ struct elf32_arm_relocs_copied **pp;
-+ struct elf32_arm_relocs_copied *p;
-+
-+ h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-+
-+ if (!info->shared && h->plt.refcount > 0)
-+ h->plt.refcount -= 1;
-+
-+ eh = (struct elf32_arm_link_hash_entry *) h;
-+
-+ for (pp = &eh->relocs_copied; (p = *pp) != NULL; pp = &p->next)
-+ if (p->section == sec)
-+ {
-+ if (ELF32_R_TYPE (rel->r_info) == R_ARM_PC24)
-+ p->pc_count -= 1;
-+ p->count -= 1;
-+ if (p->count == 0)
-+ *pp = p->next;
-+ break;
-+ }
-+ }
-+ break;
-+
-+ case R_ARM_PLT32:
-+ r_symndx = ELF32_R_SYM (rel->r_info);
-+ if (r_symndx >= symtab_hdr->sh_info)
-+ {
-+ h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-+ if (h->plt.refcount > 0)
-+ h->plt.refcount -= 1;
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
- return TRUE;
- }
-
-@@ -2622,13 +2867,15 @@
- const Elf_Internal_Rela *rel;
- const Elf_Internal_Rela *rel_end;
- bfd *dynobj;
-- asection *sgot, *srelgot, *sreloc;
-+ asection *sreloc;
- bfd_vma *local_got_offsets;
-+ struct elf32_arm_link_hash_table *htab;
-
- if (info->relocatable)
- return TRUE;
-
-- sgot = srelgot = sreloc = NULL;
-+ htab = elf32_arm_hash_table (info);
-+ sreloc = NULL;
-
- dynobj = elf_hash_table (info)->dynobj;
- local_got_offsets = elf_local_got_offsets (abfd);
-@@ -2653,126 +2900,82 @@
- else
- h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-
-- /* Some relocs require a global offset table. */
-- if (dynobj == NULL)
-- {
-- switch (ELF32_R_TYPE (rel->r_info))
-- {
-- case R_ARM_GOT32:
-- case R_ARM_GOTOFF:
-- case R_ARM_GOTPC:
-- elf_hash_table (info)->dynobj = dynobj = abfd;
-- if (! _bfd_elf_create_got_section (dynobj, info))
-- return FALSE;
-- break;
--
-- default:
-- break;
-- }
-- }
--
- switch (ELF32_R_TYPE (rel->r_info))
- {
-- case R_ARM_GOT32:
-- /* This symbol requires a global offset table entry. */
-- if (sgot == NULL)
-- {
-- sgot = bfd_get_section_by_name (dynobj, ".got");
-- BFD_ASSERT (sgot != NULL);
-- }
-+ case R_ARM_PLT32:
-+ /* This symbol requires a procedure linkage table entry. We
-+ actually build the entry in adjust_dynamic_symbol,
-+ because this might be a case of linking PIC code which is
-+ never referenced by a dynamic object, in which case we
-+ don't need to generate a procedure linkage table entry
-+ after all. */
-
-- /* Get the got relocation section if necessary. */
-- if (srelgot == NULL
-- && (h != NULL || info->shared))
-- {
-- srelgot = bfd_get_section_by_name (dynobj, ".rel.got");
-+ /* If this is a local symbol, we resolve it directly without
-+ creating a procedure linkage table entry. */
-+ if (h == NULL)
-+ continue;
-
-- /* If no got relocation section, make one and initialize. */
-- if (srelgot == NULL)
-- {
-- srelgot = bfd_make_section (dynobj, ".rel.got");
-- if (srelgot == NULL
-- || ! bfd_set_section_flags (dynobj, srelgot,
-- (SEC_ALLOC
-- | SEC_LOAD
-- | SEC_HAS_CONTENTS
-- | SEC_IN_MEMORY
-- | SEC_LINKER_CREATED
-- | SEC_READONLY))
-- || ! bfd_set_section_alignment (dynobj, srelgot, 2))
-- return FALSE;
-- }
-- }
-+ h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_PLT;
-+ h->plt.refcount++;
-+ break;
-
-+ case R_ARM_GOT32:
-+ /* This symbol requires a global offset table entry. */
- if (h != NULL)
- {
-- if (h->got.offset != (bfd_vma) -1)
-- /* We have already allocated space in the .got. */
-- break;
--
-- h->got.offset = sgot->_raw_size;
--
-- /* Make sure this symbol is output as a dynamic symbol. */
-- if (h->dynindx == -1)
-- if (! bfd_elf32_link_record_dynamic_symbol (info, h))
-- return FALSE;
--
-- srelgot->_raw_size += sizeof (Elf32_External_Rel);
-+ h->got.refcount++;
- }
- else
- {
-- /* This is a global offset table entry for a local
-- symbol. */
-- if (local_got_offsets == NULL)
-+ bfd_signed_vma *local_got_refcounts;
-+
-+ /* This is a global offset table entry for a local symbol. */
-+ local_got_refcounts = elf_local_got_refcounts (abfd);
-+ if (local_got_refcounts == NULL)
- {
- bfd_size_type size;
-- unsigned int i;
-
- size = symtab_hdr->sh_info;
-- size *= sizeof (bfd_vma);
-- local_got_offsets = (bfd_vma *) bfd_alloc (abfd, size);
-- if (local_got_offsets == NULL)
-+ size *= (sizeof (bfd_signed_vma) + sizeof(char));
-+ local_got_refcounts = ((bfd_signed_vma *)
-+ bfd_zalloc (abfd, size));
-+ if (local_got_refcounts == NULL)
- return FALSE;
-- elf_local_got_offsets (abfd) = local_got_offsets;
-- for (i = 0; i < symtab_hdr->sh_info; i++)
-- local_got_offsets[i] = (bfd_vma) -1;
-+ elf_local_got_refcounts (abfd) = local_got_refcounts;
- }
--
-- if (local_got_offsets[r_symndx] != (bfd_vma) -1)
-- /* We have already allocated space in the .got. */
-- break;
--
-- local_got_offsets[r_symndx] = sgot->_raw_size;
--
-- if (info->shared)
-- /* If we are generating a shared object, we need to
-- output a R_ARM_RELATIVE reloc so that the dynamic
-- linker can adjust this GOT entry. */
-- srelgot->_raw_size += sizeof (Elf32_External_Rel);
-+ local_got_refcounts[r_symndx] += 1;
- }
--
-- sgot->_raw_size += 4;
- break;
-
-- case R_ARM_PLT32:
-- /* This symbol requires a procedure linkage table entry. We
-- actually build the entry in adjust_dynamic_symbol,
-- because this might be a case of linking PIC code which is
-- never referenced by a dynamic object, in which case we
-- don't need to generate a procedure linkage table entry
-- after all. */
--
-- /* If this is a local symbol, we resolve it directly without
-- creating a procedure linkage table entry. */
-- if (h == NULL)
-- continue;
--
-- h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_PLT;
-+ case R_ARM_GOTOFF:
-+ case R_ARM_GOTPC:
-+ if (htab->sgot == NULL)
-+ {
-+ if (htab->root.dynobj == NULL)
-+ htab->root.dynobj = abfd;
-+ if (!create_got_section (htab->root.dynobj, info))
-+ return FALSE;
-+ }
- break;
-
- case R_ARM_ABS32:
- case R_ARM_REL32:
- case R_ARM_PC24:
-+ if (h != NULL && !info->shared)
-+ {
-+ /* If this reloc is in a read-only section, we might
-+ need a copy reloc. We can't check reliably at this
-+ stage whether the section is read-only, as input
-+ sections have not yet been mapped to output sections.
-+ Tentatively set the flag for now, and correct in
-+ adjust_dynamic_symbol. */
-+ h->elf_link_hash_flags |= ELF_LINK_NON_GOT_REF;
-+
-+ /* We may need a .plt entry if the function this reloc
-+ refers to is in a shared lib. */
-+ h->plt.refcount += 1;
-+ }
-+
- /* If we are creating a shared library, and this is a reloc
- against a global symbol, or a non PC relative reloc
- against a local symbol, then we need to copy the reloc
-@@ -2784,14 +2987,17 @@
- possible that DEF_REGULAR is not set now but will be set
- later (it is never cleared). We account for that
- possibility below by storing information in the
-- pcrel_relocs_copied field of the hash table entry. */
-+ relocs_copied field of the hash table entry. */
- if (info->shared
-- && (ELF32_R_TYPE (rel->r_info) != R_ARM_PC24
-- || (h != NULL
-- && (! info->symbolic
-- || (h->elf_link_hash_flags
-- & ELF_LINK_HASH_DEF_REGULAR) == 0))))
-+ && (sec->flags & SEC_ALLOC) != 0
-+ && (ELF32_R_TYPE (rel->r_info) != R_ARM_PC24
-+ || (h != NULL
-+ && (! info->symbolic
-+ || (h->elf_link_hash_flags
-+ & ELF_LINK_HASH_DEF_REGULAR) == 0))))
- {
-+ struct elf32_arm_relocs_copied *p, **head;
-+
- /* When creating a shared object, we must copy these
- reloc types into the output file. We create a reloc
- section in dynobj and make room for this reloc. */
-@@ -2825,45 +3031,49 @@
- || ! bfd_set_section_alignment (dynobj, sreloc, 2))
- return FALSE;
- }
-- if (sec->flags & SEC_READONLY)
-- info->flags |= DF_TEXTREL;
-+
-+ elf_section_data (sec)->sreloc = sreloc;
- }
-
-- sreloc->_raw_size += sizeof (Elf32_External_Rel);
-- /* If we are linking with -Bsymbolic, and this is a
-- global symbol, we count the number of PC relative
-- relocations we have entered for this symbol, so that
-- we can discard them again if the symbol is later
-- defined by a regular object. Note that this function
-- is only called if we are using an elf_i386 linker
-- hash table, which means that h is really a pointer to
-- an elf_i386_link_hash_entry. */
-- if (h != NULL && info->symbolic
-- && ELF32_R_TYPE (rel->r_info) == R_ARM_PC24)
-+ /* If this is a global symbol, we count the number of
-+ relocations we need for this symbol. */
-+ if (h != NULL)
- {
-- struct elf32_arm_link_hash_entry * eh;
-- struct elf32_arm_pcrel_relocs_copied * p;
--
-- eh = (struct elf32_arm_link_hash_entry *) h;
--
-- for (p = eh->pcrel_relocs_copied; p != NULL; p = p->next)
-- if (p->section == sreloc)
-- break;
--
-+ head = &((struct elf32_arm_link_hash_entry *) h)->relocs_copied;
-+ }
-+ else
-+ {
-+ /* Track dynamic relocs needed for local syms too.
-+ We really need local syms available to do this
-+ easily. Oh well. */
-+
-+ asection *s;
-+ s = bfd_section_from_r_symndx (abfd, &htab->sym_sec,
-+ sec, r_symndx);
-+ if (s == NULL)
-+ return FALSE;
-+
-+ head = ((struct elf32_arm_relocs_copied **)
-+ &elf_section_data (s)->local_dynrel);
-+ }
-+
-+ p = *head;
-+ if (p == NULL || p->section != sec)
-+ {
-+ bfd_size_type amt = sizeof *p;
-+ p = bfd_alloc (htab->root.dynobj, amt);
- if (p == NULL)
-- {
-- p = ((struct elf32_arm_pcrel_relocs_copied *)
-- bfd_alloc (dynobj, (bfd_size_type) sizeof * p));
-- if (p == NULL)
-- return FALSE;
-- p->next = eh->pcrel_relocs_copied;
-- eh->pcrel_relocs_copied = p;
-- p->section = sreloc;
-- p->count = 0;
-- }
--
-- ++p->count;
-+ return FALSE;
-+ p->next = *head;
-+ *head = p;
-+ p->section = sec;
-+ p->count = 0;
-+ p->pc_count = 0;
- }
-+
-+ p->count += 1;
-+ if (ELF32_R_TYPE (rel->r_info) == R_ARM_PC24)
-+ p->pc_count += 1;
- }
- break;
-
-@@ -3003,71 +3213,29 @@
- if (h->type == STT_FUNC
- || (h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0)
- {
-- /* If we link a program (not a DSO), we'll get rid of unnecessary
-- PLT entries; we point to the actual symbols -- even for pic
-- relocs, because a program built with -fpic should have the same
-- result as one built without -fpic, specifically considering weak
-- symbols.
-- FIXME: m68k and i386 differ here, for unclear reasons. */
-- if (! info->shared
-- && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) == 0)
-+ if (h->plt.refcount <= 0
-+ || SYMBOL_CALLS_LOCAL (info, h)
-+ || (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
-+ && h->root.type == bfd_link_hash_undefweak))
- {
- /* This case can occur if we saw a PLT32 reloc in an input
-- file, but the symbol was not defined by a dynamic object.
-- In such a case, we don't actually need to build a
-- procedure linkage table, and we can just do a PC32 reloc
-- instead. */
-- BFD_ASSERT ((h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0);
-+ file, but the symbol was never referred to by a dynamic
-+ object, or if all references were garbage collected. In
-+ such a case, we don't actually need to build a procedure
-+ linkage table, and we can just do a PC24 reloc instead. */
-+ h->plt.offset = (bfd_vma) -1;
- h->elf_link_hash_flags &= ~ELF_LINK_HASH_NEEDS_PLT;
-- return TRUE;
-- }
--
-- /* Make sure this symbol is output as a dynamic symbol. */
-- if (h->dynindx == -1)
-- {
-- if (! bfd_elf32_link_record_dynamic_symbol (info, h))
-- return FALSE;
- }
-
-- s = bfd_get_section_by_name (dynobj, ".plt");
-- BFD_ASSERT (s != NULL);
--
-- /* If this is the first .plt entry, make room for the special
-- first entry. */
-- if (s->_raw_size == 0)
-- s->_raw_size += PLT_ENTRY_SIZE;
--
-- /* If this symbol is not defined in a regular file, and we are
-- not generating a shared library, then set the symbol to this
-- location in the .plt. This is required to make function
-- pointers compare as equal between the normal executable and
-- the shared library. */
-- if (! info->shared
-- && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)
-- {
-- h->root.u.def.section = s;
-- h->root.u.def.value = s->_raw_size;
-- }
--
-- h->plt.offset = s->_raw_size;
--
-- /* Make room for this entry. */
-- s->_raw_size += PLT_ENTRY_SIZE;
--
-- /* We also need to make an entry in the .got.plt section, which
-- will be placed in the .got section by the linker script. */
-- s = bfd_get_section_by_name (dynobj, ".got.plt");
-- BFD_ASSERT (s != NULL);
-- s->_raw_size += 4;
--
-- /* We also need to make an entry in the .rel.plt section. */
--
-- s = bfd_get_section_by_name (dynobj, ".rel.plt");
-- BFD_ASSERT (s != NULL);
-- s->_raw_size += sizeof (Elf32_External_Rel);
--
- return TRUE;
- }
-+ else
-+ /* It's possible that we incorrectly decided a .plt reloc was
-+ needed for an R_ARM_PC24 reloc to a non-function sym in
-+ check_relocs. We can't decide accurately between function and
-+ non-function syms in check-relocs; Objects loaded later in
-+ the link may change h->type. So fix it now. */
-+ h->plt.offset = (bfd_vma) -1;
-
- /* If this is a weak symbol, and there is a real definition, the
- processor independent code will have arranged for us to see the
-@@ -3142,6 +3310,198 @@
- return TRUE;
- }
-
-+/* Allocate space in .plt, .got and associated reloc sections for
-+ dynamic relocs. */
-+
-+static bfd_boolean
-+allocate_dynrelocs (h, inf)
-+ struct elf_link_hash_entry *h;
-+ PTR inf;
-+{
-+ struct bfd_link_info *info;
-+ struct elf32_arm_link_hash_table *htab;
-+ struct elf32_arm_link_hash_entry *eh;
-+ struct elf32_arm_relocs_copied *p;
-+
-+ if (h->root.type == bfd_link_hash_indirect)
-+ return TRUE;
-+
-+ if (h->root.type == bfd_link_hash_warning)
-+ /* When warning symbols are created, they **replace** the "real"
-+ entry in the hash table, thus we never get to see the real
-+ symbol in a hash traversal. So look at it now. */
-+ h = (struct elf_link_hash_entry *) h->root.u.i.link;
-+
-+ info = (struct bfd_link_info *) inf;
-+ htab = elf32_arm_hash_table (info);
-+
-+ if (htab->root.dynamic_sections_created
-+ && h->plt.refcount > 0)
-+ {
-+ /* Make sure this symbol is output as a dynamic symbol.
-+ Undefined weak syms won't yet be marked as dynamic. */
-+ if (h->dynindx == -1
-+ && (h->elf_link_hash_flags & ELF_LINK_FORCED_LOCAL) == 0)
-+ {
-+ if (! bfd_elf32_link_record_dynamic_symbol (info, h))
-+ return FALSE;
-+ }
-+
-+ if (info->shared
-+ || WILL_CALL_FINISH_DYNAMIC_SYMBOL (1, info, h))
-+ {
-+ asection *s = htab->splt;
-+
-+ /* If this is the first .plt entry, make room for the special
-+ first entry. */
-+ if (s->_raw_size == 0)
-+ s->_raw_size += PLT_HEADER_SIZE;
-+
-+ h->plt.offset = s->_raw_size;
-+
-+ /* If this symbol is not defined in a regular file, and we are
-+ not generating a shared library, then set the symbol to this
-+ location in the .plt. This is required to make function
-+ pointers compare as equal between the normal executable and
-+ the shared library. */
-+ if (! info->shared
-+ && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)
-+ {
-+ h->root.u.def.section = s;
-+ h->root.u.def.value = h->plt.offset;
-+ }
-+
-+ /* Make room for this entry. */
-+ s->_raw_size += PLT_ENTRY_SIZE;
-+
-+ /* We also need to make an entry in the .got.plt section, which
-+ will be placed in the .got section by the linker script. */
-+ htab->sgotplt->_raw_size += 4;
-+
-+ /* We also need to make an entry in the .rel.plt section. */
-+ htab->srelplt->_raw_size += sizeof (Elf32_External_Rel);
-+ }
-+ else
-+ {
-+ h->plt.offset = (bfd_vma) -1;
-+ h->elf_link_hash_flags &= ~ELF_LINK_HASH_NEEDS_PLT;
-+ }
-+ }
-+ else
-+ {
-+ h->plt.offset = (bfd_vma) -1;
-+ h->elf_link_hash_flags &= ~ELF_LINK_HASH_NEEDS_PLT;
-+ }
-+
-+ if (h->got.refcount > 0)
-+ {
-+ asection *s;
-+ bfd_boolean dyn;
-+
-+ /* Make sure this symbol is output as a dynamic symbol.
-+ Undefined weak syms won't yet be marked as dynamic. */
-+ if (h->dynindx == -1
-+ && (h->elf_link_hash_flags & ELF_LINK_FORCED_LOCAL) == 0)
-+ {
-+ if (! bfd_elf32_link_record_dynamic_symbol (info, h))
-+ return FALSE;
-+ }
-+
-+ s = htab->sgot;
-+ h->got.offset = s->_raw_size;
-+ s->_raw_size += 4;
-+ dyn = htab->root.dynamic_sections_created;
-+ if ((ELF_ST_VISIBILITY (h->other) == STV_DEFAULT
-+ || h->root.type != bfd_link_hash_undefweak)
-+ && (info->shared
-+ || WILL_CALL_FINISH_DYNAMIC_SYMBOL (dyn, 0, h)))
-+ htab->srelgot->_raw_size += sizeof (Elf32_External_Rel);
-+ }
-+ else
-+ h->got.offset = (bfd_vma) -1;
-+
-+ eh = (struct elf32_arm_link_hash_entry *) h;
-+ if (eh->relocs_copied == NULL)
-+ return TRUE;
-+
-+ /* In the shared -Bsymbolic case, discard space allocated for
-+ dynamic pc-relative relocs against symbols which turn out to be
-+ defined in regular objects. For the normal shared case, discard
-+ space for pc-relative relocs that have become local due to symbol
-+ visibility changes. */
-+
-+ if (info->shared)
-+ {
-+ /* The only reloc that uses pc_count is R_ARM_PC24, which will
-+ appear on a call or on something like ".long foo - .". We
-+ want calls to protected symbols to resolve directly to the
-+ function rather than going via the plt. If people want
-+ function pointer comparisons to work as expected then they
-+ should avoid writing assembly like ".long foo - .". */
-+ if (SYMBOL_CALLS_LOCAL (info, h))
-+ {
-+ struct elf32_arm_relocs_copied **pp;
-+
-+ for (pp = &eh->relocs_copied; (p = *pp) != NULL; )
-+ {
-+ p->count -= p->pc_count;
-+ p->pc_count = 0;
-+ if (p->count == 0)
-+ *pp = p->next;
-+ else
-+ pp = &p->next;
-+ }
-+ }
-+
-+ /* Also discard relocs on undefined weak syms with non-default
-+ visibility. */
-+ if (ELF_ST_VISIBILITY (h->other) != STV_DEFAULT
-+ && h->root.type == bfd_link_hash_undefweak)
-+ eh->relocs_copied = NULL;
-+ }
-+ else
-+ {
-+ /* For the non-shared case, discard space for relocs against
-+ symbols which turn out to need copy relocs or are not
-+ dynamic. */
-+
-+ if ((h->elf_link_hash_flags & ELF_LINK_NON_GOT_REF) == 0
-+ && (((h->elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) != 0
-+ && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)
-+ || (htab->root.dynamic_sections_created
-+ && (h->root.type == bfd_link_hash_undefweak
-+ || h->root.type == bfd_link_hash_undefined))))
-+ {
-+ /* Make sure this symbol is output as a dynamic symbol.
-+ Undefined weak syms won't yet be marked as dynamic. */
-+ if (h->dynindx == -1
-+ && (h->elf_link_hash_flags & ELF_LINK_FORCED_LOCAL) == 0)
-+ {
-+ if (! bfd_elf32_link_record_dynamic_symbol (info, h))
-+ return FALSE;
-+ }
-+
-+ /* If that succeeded, we know we'll be keeping all the
-+ relocs. */
-+ if (h->dynindx != -1)
-+ goto keep;
-+ }
-+
-+ eh->relocs_copied = NULL;
-+
-+ keep: ;
-+ }
-+
-+ /* Finally, allocate space. */
-+ for (p = eh->relocs_copied; p != NULL; p = p->next)
-+ {
-+ asection *sreloc = elf_section_data (p->section)->sreloc;
-+ sreloc->_raw_size += p->count * sizeof (Elf32_External_Rel);
-+ }
-+
-+ return TRUE;
-+}
-+
- /* Set the sizes of the dynamic sections. */
-
- static bfd_boolean
-@@ -3153,7 +3513,10 @@
- asection * s;
- bfd_boolean plt;
- bfd_boolean relocs;
-+ bfd *ibfd;
-+ struct elf32_arm_link_hash_table *htab;
-
-+ htab = elf32_arm_hash_table (info);
- dynobj = elf_hash_table (info)->dynobj;
- BFD_ASSERT (dynobj != NULL);
-
-@@ -3168,26 +3531,74 @@
- s->contents = (unsigned char *) ELF_DYNAMIC_INTERPRETER;
- }
- }
-- else
-- {
-- /* We may have created entries in the .rel.got section.
-- However, if we are not creating the dynamic sections, we will
-- not actually use these entries. Reset the size of .rel.got,
-- which will cause it to get stripped from the output file
-- below. */
-- s = bfd_get_section_by_name (dynobj, ".rel.got");
-- if (s != NULL)
-- s->_raw_size = 0;
-- }
--
-- /* If this is a -Bsymbolic shared link, then we need to discard all
-- PC relative relocs against symbols defined in a regular object.
-- We allocated space for them in the check_relocs routine, but we
-- will not fill them in in the relocate_section routine. */
-- if (info->shared && info->symbolic)
-- elf32_arm_link_hash_traverse (elf32_arm_hash_table (info),
-- elf32_arm_discard_copies,
-- (PTR) NULL);
-+
-+ /* Set up .got offsets for local syms, and space for local dynamic
-+ relocs. */
-+ for (ibfd = info->input_bfds; ibfd != NULL; ibfd = ibfd->link_next)
-+ {
-+ bfd_signed_vma *local_got;
-+ bfd_signed_vma *end_local_got;
-+ char *local_tls_type;
-+ bfd_size_type locsymcount;
-+ Elf_Internal_Shdr *symtab_hdr;
-+ asection *srel;
-+
-+ if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour)
-+ continue;
-+
-+ for (s = ibfd->sections; s != NULL; s = s->next)
-+ {
-+ struct elf32_arm_relocs_copied *p;
-+
-+ for (p = *((struct elf32_arm_relocs_copied **)
-+ &elf_section_data (s)->local_dynrel);
-+ p != NULL;
-+ p = p->next)
-+ {
-+ if (!bfd_is_abs_section (p->section)
-+ && bfd_is_abs_section (p->section->output_section))
-+ {
-+ /* Input section has been discarded, either because
-+ it is a copy of a linkonce section or due to
-+ linker script /DISCARD/, so we'll be discarding
-+ the relocs too. */
-+ }
-+ else if (p->count != 0)
-+ {
-+ srel = elf_section_data (p->section)->sreloc;
-+ srel->_raw_size += p->count * sizeof (Elf32_External_Rel);
-+ if ((p->section->output_section->flags & SEC_READONLY) != 0)
-+ info->flags |= DF_TEXTREL;
-+ }
-+ }
-+ }
-+
-+ local_got = elf_local_got_refcounts (ibfd);
-+ if (!local_got)
-+ continue;
-+
-+ symtab_hdr = &elf_tdata (ibfd)->symtab_hdr;
-+ locsymcount = symtab_hdr->sh_info;
-+ end_local_got = local_got + locsymcount;
-+ s = htab->sgot;
-+ srel = htab->srelgot;
-+ for (; local_got < end_local_got; ++local_got, ++local_tls_type)
-+ {
-+ if (*local_got > 0)
-+ {
-+ *local_got = s->_raw_size;
-+ s->_raw_size += 4;
-+ if (info->shared)
-+ srel->_raw_size += sizeof (Elf32_External_Rel);
-+ }
-+ else
-+ *local_got = (bfd_vma) -1;
-+ }
-+ }
-+
-+ /* Allocate global sym .plt and .got entries, and space for global
-+ sym dynamic relocs. */
-+ elf_link_hash_traverse (&htab->root, allocate_dynrelocs, (PTR) info);
-
- /* The check_relocs and adjust_dynamic_symbol entry points have
- determined the sizes of the various dynamic sections. Allocate
-@@ -3312,33 +3723,6 @@
- return TRUE;
- }
-
--/* This function is called via elf32_arm_link_hash_traverse if we are
-- creating a shared object with -Bsymbolic. It discards the space
-- allocated to copy PC relative relocs against symbols which are
-- defined in regular objects. We allocated space for them in the
-- check_relocs routine, but we won't fill them in in the
-- relocate_section routine. */
--
--static bfd_boolean
--elf32_arm_discard_copies (h, ignore)
-- struct elf32_arm_link_hash_entry * h;
-- PTR ignore ATTRIBUTE_UNUSED;
--{
-- struct elf32_arm_pcrel_relocs_copied * s;
--
-- if (h->root.root.type == bfd_link_hash_warning)
-- h = (struct elf32_arm_link_hash_entry *) h->root.root.u.i.link;
--
-- /* We only discard relocs for symbols defined in a regular object. */
-- if ((h->root.elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)
-- return TRUE;
--
-- for (s = h->pcrel_relocs_copied; s != NULL; s = s->next)
-- s->section->_raw_size -= s->count * sizeof (Elf32_External_Rel);
--
-- return TRUE;
--}
--
- /* Finish up dynamic symbol handling. We set the contents of various
- dynamic sections here. */
-
-@@ -3362,6 +3746,7 @@
- bfd_vma got_offset;
- Elf_Internal_Rela rel;
- bfd_byte *loc;
-+ bfd_vma got_displacement;
-
- /* This symbol has an entry in the procedure linkage table. Set
- it up. */
-@@ -3377,35 +3762,43 @@
- corresponds to this symbol. This is the index of this symbol
- in all the symbols for which we are making plt entries. The
- first entry in the procedure linkage table is reserved. */
-- plt_index = h->plt.offset / PLT_ENTRY_SIZE - 1;
-+ plt_index = (h->plt.offset - PLT_HEADER_SIZE) / PLT_ENTRY_SIZE;
-
- /* Get the offset into the .got table of the entry that
- corresponds to this function. Each .got entry is 4 bytes.
- The first three are reserved. */
- got_offset = (plt_index + 3) * 4;
-
-+ /* Calculate the displacement between the PLT slot and the
-+ entry in the GOT. */
-+ got_displacement = (sgot->output_section->vma
-+ + sgot->output_offset
-+ + got_offset
-+ - splt->output_section->vma
-+ - splt->output_offset
-+ - h->plt.offset
-+ - 8);
-+
-+ BFD_ASSERT ((got_displacement & 0xf0000000) == 0);
-+
- /* Fill in the entry in the procedure linkage table. */
-- bfd_put_32 (output_bfd, elf32_arm_plt_entry[0],
-+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[0] | ((got_displacement & 0x0ff00000) >> 20),
- splt->contents + h->plt.offset + 0);
-- bfd_put_32 (output_bfd, elf32_arm_plt_entry[1],
-+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[1] | ((got_displacement & 0x000ff000) >> 12),
- splt->contents + h->plt.offset + 4);
-- bfd_put_32 (output_bfd, elf32_arm_plt_entry[2],
-+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[2] | (got_displacement & 0x00000fff),
- splt->contents + h->plt.offset + 8);
-- bfd_put_32 (output_bfd,
-- (sgot->output_section->vma
-- + sgot->output_offset
-- + got_offset
-- - splt->output_section->vma
-- - splt->output_offset
-- - h->plt.offset - 12),
-- splt->contents + h->plt.offset + 12);
-+#ifdef FOUR_WORD_PLT
-+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[3],
-+ splt->contents + h->plt.offset + 12);
-+#endif
-
- /* Fill in the entry in the global offset table. */
- bfd_put_32 (output_bfd,
- (splt->output_section->vma
- + splt->output_offset),
- sgot->contents + got_offset);
--
-+
- /* Fill in the entry in the .rel.plt section. */
- rel.r_offset = (sgot->output_section->vma
- + sgot->output_offset
-@@ -3446,16 +3839,20 @@
- + sgot->output_offset
- + (h->got.offset &~ (bfd_vma) 1));
-
-- /* If this is a -Bsymbolic link, and the symbol is defined
-- locally, we just want to emit a RELATIVE reloc. The entry in
-- the global offset table will already have been initialized in
-- the relocate_section function. */
-+ /* If this is a static link, or it is a -Bsymbolic link and the
-+ symbol is defined locally or was forced to be local because
-+ of a version file, we just want to emit a RELATIVE reloc.
-+ The entry in the global offset table will already have been
-+ initialized in the relocate_section function. */
- if (info->shared
-- && (info->symbolic || h->dynindx == -1)
-- && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR))
-- rel.r_info = ELF32_R_INFO (0, R_ARM_RELATIVE);
-+ && SYMBOL_REFERENCES_LOCAL (info, h))
-+ {
-+ BFD_ASSERT((h->got.offset & 1) != 0);
-+ rel.r_info = ELF32_R_INFO (0, R_ARM_RELATIVE);
-+ }
- else
- {
-+ BFD_ASSERT((h->got.offset & 1) == 0);
- bfd_put_32 (output_bfd, (bfd_vma) 0, sgot->contents + h->got.offset);
- rel.r_info = ELF32_R_INFO (h->dynindx, R_ARM_GLOB_DAT);
- }
-@@ -3609,10 +4006,26 @@
- /* Fill in the first entry in the procedure linkage table. */
- if (splt->_raw_size > 0)
- {
-+ bfd_vma got_displacement;
-+
-+ /* Calculate the displacement between the PLT slot and &GOT[0]. */
-+ got_displacement = (sgot->output_section->vma
-+ + sgot->output_offset
-+ - splt->output_section->vma
-+ - splt->output_offset
-+ - 16);
-+
- bfd_put_32 (output_bfd, elf32_arm_plt0_entry[0], splt->contents + 0);
- bfd_put_32 (output_bfd, elf32_arm_plt0_entry[1], splt->contents + 4);
- bfd_put_32 (output_bfd, elf32_arm_plt0_entry[2], splt->contents + 8);
- bfd_put_32 (output_bfd, elf32_arm_plt0_entry[3], splt->contents + 12);
-+#ifdef FOUR_WORD_PLT
-+ /* The displacement value goes in the otherwise-unused last word of
-+ the second entry. */
-+ bfd_put_32 (output_bfd, got_displacement, splt->contents + 28);
-+#else
-+ bfd_put_32 (output_bfd, got_displacement, splt->contents + 16);
-+#endif
- }
-
- /* UnixWare sets the entsize of .plt to 4, although that doesn't
-@@ -3714,7 +4127,7 @@
- #define elf_backend_check_relocs elf32_arm_check_relocs
- #define elf_backend_relocate_section elf32_arm_relocate_section
- #define elf_backend_adjust_dynamic_symbol elf32_arm_adjust_dynamic_symbol
--#define elf_backend_create_dynamic_sections _bfd_elf_create_dynamic_sections
-+#define elf_backend_create_dynamic_sections elf32_arm_create_dynamic_sections
- #define elf_backend_finish_dynamic_symbol elf32_arm_finish_dynamic_symbol
- #define elf_backend_finish_dynamic_sections elf32_arm_finish_dynamic_sections
- #define elf_backend_size_dynamic_sections elf32_arm_size_dynamic_sections
-@@ -3723,7 +4136,9 @@
- #define elf_backend_object_p elf32_arm_object_p
- #define elf_backend_section_flags elf32_arm_section_flags
- #define elf_backend_final_write_processing elf32_arm_final_write_processing
-+#define elf_backend_copy_indirect_symbol elf32_arm_copy_indirect_symbol
-
-+#define elf_backend_can_refcount 1
- #define elf_backend_can_gc_sections 1
- #define elf_backend_plt_readonly 1
- #define elf_backend_want_got_plt 1
-@@ -3733,7 +4148,7 @@
- #endif
-
- #define elf_backend_got_header_size 12
--#define elf_backend_plt_header_size PLT_ENTRY_SIZE
-+#define elf_backend_plt_header_size PLT_HEADER_SIZE
-
- #include "elf32-target.h"
-
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-avr.c binutils-2.14.90.0.7/bfd/elf32-avr.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-avr.c 2003-07-23 09:08:08.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-avr.c 2004-04-20 01:26:12.000000000 -0600
-@@ -750,7 +750,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-cris.c binutils-2.14.90.0.7/bfd/elf32-cris.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-cris.c 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-cris.c 2004-04-20 01:26:12.000000000 -0600
-@@ -847,7 +847,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- symname = (bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name));
-@@ -1292,16 +1292,7 @@
- {
- long indx;
-
-- if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+ if (bfd_is_abs_section (sec))
- indx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-fr30.c binutils-2.14.90.0.7/bfd/elf32-fr30.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-fr30.c 2003-07-23 09:08:08.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-fr30.c 2004-04-20 01:26:12.000000000 -0600
-@@ -552,7 +552,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-frv.c binutils-2.14.90.0.7/bfd/elf32-frv.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-frv.c 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-frv.c 2004-04-20 01:26:12.000000000 -0600
-@@ -724,7 +724,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-h8300.c binutils-2.14.90.0.7/bfd/elf32-h8300.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-h8300.c 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-h8300.c 2004-04-20 01:26:12.000000000 -0600
-@@ -435,7 +435,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-hppa.c binutils-2.14.90.0.7/bfd/elf32-hppa.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-hppa.c 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-hppa.c 2004-04-20 01:26:12.000000000 -0600
-@@ -3408,7 +3408,7 @@
- /* This is a local symbol, h defaults to NULL. */
- sym = local_syms + r_symndx;
- sym_sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sym_sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sym_sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-i370.c binutils-2.14.90.0.7/bfd/elf32-i370.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-i370.c 2003-07-23 09:08:08.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-i370.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1210,7 +1210,7 @@
- sec = local_sections[r_symndx];
- sym_name = "<local symbol>";
-
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- addend = rel->r_addend;
- }
- else
-@@ -1363,16 +1363,7 @@
- {
- long indx;
-
-- if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+ if (bfd_is_abs_section (sec))
- indx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-i860.c binutils-2.14.90.0.7/bfd/elf32-i860.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-i860.c 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-i860.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1104,7 +1104,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-m32r.c binutils-2.14.90.0.7/bfd/elf32-m32r.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-m32r.c 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-m32r.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1107,7 +1107,7 @@
- sec = local_sections[r_symndx];
- sym_name = "<local symbol>";
- #if !USE_REL
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- addend = rel->r_addend;
- #else
- /* FIXME: This won't handle local relocations against SEC_MERGE
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-m68k.c binutils-2.14.90.0.7/bfd/elf32-m68k.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-m68k.c 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-m68k.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1403,7 +1403,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-@@ -1657,16 +1657,7 @@
- {
- long indx;
-
-- if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+ if (bfd_is_abs_section (sec))
- indx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-mcore.c binutils-2.14.90.0.7/bfd/elf32-mcore.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-mcore.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-mcore.c 2004-04-20 01:26:12.000000000 -0600
-@@ -467,7 +467,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- addend = rel->r_addend;
- }
- else
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-msp430.c binutils-2.14.90.0.7/bfd/elf32-msp430.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-msp430.c 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-msp430.c 2004-04-20 01:26:12.000000000 -0600
-@@ -449,7 +449,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-openrisc.c binutils-2.14.90.0.7/bfd/elf32-openrisc.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-openrisc.c 2003-07-23 09:08:08.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-openrisc.c 2004-04-20 01:26:12.000000000 -0600
-@@ -375,7 +375,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-ppc.c binutils-2.14.90.0.7/bfd/elf32-ppc.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-ppc.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-ppc.c 2004-04-20 01:26:12.000000000 -0600
-@@ -4727,7 +4727,7 @@
- sec = local_sections[r_symndx];
- sym_name = bfd_elf_local_sym_name (input_bfd, sym);
-
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-@@ -5455,44 +5455,9 @@
- break;
-
- case R_PPC_RELAX32:
-- {
-- unsigned long r_symndx;
-- Elf_Internal_Sym *sym;
-- asection *sym_sec;
-- bfd_byte *hit_addr = 0;
-- bfd_vma value = 0;
--
-- r_symndx = ELF32_R_SYM (rel->r_info);
--
-- if (r_symndx < symtab_hdr->sh_info)
-- {
-- sym = local_syms + r_symndx;
-- sym_sec = local_sections[r_symndx];
--
-- value = _bfd_elf_rela_local_sym (output_bfd, sym, sym_sec, rel);
-- }
-- else
-- {
-- bfd_boolean warned;
-- bfd_boolean unresolved_reloc;
--
-- RELOC_FOR_GLOBAL_SYMBOL (h, elf_sym_hashes (input_bfd),
-- r_symndx, symtab_hdr,
-- value, sym_sec,
-- unresolved_reloc, info,
-- warned);
-- if (warned)
-- continue;
-- }
-- hit_addr = contents + rel->r_offset;
-- value += rel->r_addend;
--
-- r = ppc_elf_install_value (output_bfd, hit_addr, value, r_type);
-- if (r != bfd_reloc_ok)
-- break;
-- else
-- continue;
-- }
-+ ppc_elf_install_value (output_bfd, contents + rel->r_offset,
-+ relocation + addend, r_type);
-+ continue;
-
- /* Indirect .sdata relocation. */
- case R_PPC_EMB_SDAI16:
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-s390.c binutils-2.14.90.0.7/bfd/elf32-s390.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-s390.c 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-s390.c 2004-04-20 01:26:12.000000000 -0600
-@@ -2327,7 +2327,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-sh.c binutils-2.14.90.0.7/bfd/elf32-sh.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-sh.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-sh.c 2004-04-20 01:26:12.000000000 -0600
-@@ -4805,7 +4805,7 @@
- }
- else if (! howto->partial_inplace)
- {
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- addend = rel->r_addend;
- }
- else if ((sec->flags & SEC_MERGE)
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-sparc.c binutils-2.14.90.0.7/bfd/elf32-sparc.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-sparc.c 2003-08-21 09:28:48.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-sparc.c 2004-04-20 01:26:12.000000000 -0600
-@@ -2182,7 +2182,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-@@ -2459,16 +2459,8 @@
-
- if (is_plt)
- sec = htab->splt;
-- else if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+
-+ if (bfd_is_abs_section (sec))
- indx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-v850.c binutils-2.14.90.0.7/bfd/elf32-v850.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-v850.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-v850.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1681,7 +1681,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- #if 0
- {
- char * name;
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-vax.c binutils-2.14.90.0.7/bfd/elf32-vax.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-vax.c 2003-08-21 09:28:48.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-vax.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1483,7 +1483,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-@@ -1737,16 +1737,7 @@
- {
- long indx;
-
-- if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+ if (bfd_is_abs_section (sec))
- indx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-xstormy16.c binutils-2.14.90.0.7/bfd/elf32-xstormy16.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-xstormy16.c 2003-07-23 09:08:09.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf32-xstormy16.c 2004-04-20 01:26:12.000000000 -0600
-@@ -845,7 +845,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf32-xtensa.c binutils-2.14.90.0.7/bfd/elf32-xtensa.c
---- binutils-2.14.90.0.7.orig/bfd/elf32-xtensa.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf32-xtensa.c 2004-04-20 01:26:12.000000000 -0600
-@@ -2004,7 +2004,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-alpha.c binutils-2.14.90.0.7/bfd/elf64-alpha.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-alpha.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf64-alpha.c 2004-04-20 01:26:12.000000000 -0600
-@@ -4394,9 +4394,11 @@
-
- if (r_symndx < symtab_hdr->sh_info)
- {
-+ asection *msec;
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- value = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ msec = sec;
-+ value = _bfd_elf_rela_local_sym (output_bfd, sym, &msec, rel);
-
- /* If this is a tp-relative relocation against sym 0,
- this is hackery from relax_section. Force the value to
-@@ -4424,7 +4426,6 @@
- && !gotent->reloc_xlated)
- {
- struct alpha_elf_got_entry *ent;
-- asection *msec;
-
- for (ent = gotent; ent; ent = ent->next)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-hppa.c binutils-2.14.90.0.7/bfd/elf64-hppa.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-hppa.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf64-hppa.c 2004-04-20 01:26:12.000000000 -0600
-@@ -173,7 +173,7 @@
- PTR info));
-
- static const char *get_dyn_name
-- PARAMS ((asection *, struct elf_link_hash_entry *,
-+ PARAMS ((bfd *, struct elf_link_hash_entry *,
- const Elf_Internal_Rela *, char **, size_t *));
-
- /* This must follow the definitions of the various derived linker
-@@ -446,13 +446,14 @@
- allocate memory as necessary, possibly reusing PBUF/PLEN. */
-
- static const char *
--get_dyn_name (sec, h, rel, pbuf, plen)
-- asection *sec;
-+get_dyn_name (abfd, h, rel, pbuf, plen)
-+ bfd *abfd;
- struct elf_link_hash_entry *h;
- const Elf_Internal_Rela *rel;
- char **pbuf;
- size_t *plen;
- {
-+ asection *sec = abfd->sections;
- size_t nlen, tlen;
- char *buf;
- size_t len;
-@@ -858,7 +859,7 @@
- continue;
-
- /* Collect a canonical name for this address. */
-- addr_name = get_dyn_name (sec, h, rel, &buf, &buf_len);
-+ addr_name = get_dyn_name (abfd, h, rel, &buf, &buf_len);
-
- /* Collect the canonical entry data for this address. */
- dyn_h = elf64_hppa_dyn_hash_lookup (&hppa_info->dyn_hash_table,
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-mmix.c binutils-2.14.90.0.7/bfd/elf64-mmix.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-mmix.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf64-mmix.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1472,7 +1472,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections [r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-ppc.c binutils-2.14.90.0.7/bfd/elf64-ppc.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-ppc.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf64-ppc.c 2004-04-20 01:26:12.000000000 -0600
-@@ -7385,7 +7385,7 @@
- sec = local_sections[r_symndx];
- sym_name = bfd_elf_local_sym_name (input_bfd, sym);
- sym_type = ELF64_ST_TYPE (sym->st_info);
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- if (elf_section_data (sec) != NULL)
- {
- long *opd_sym_adjust;
-@@ -8178,7 +8178,9 @@
- relocation = TOCstart;
- if (r_symndx == 0)
- relocation += htab->stub_group[input_section->id].toc_off;
-- else if (sec != NULL && !unresolved_reloc)
-+ else if (unresolved_reloc)
-+ ;
-+ else if (sec != NULL && sec->id <= htab->top_id)
- relocation += htab->stub_group[sec->id].toc_off;
- else
- unresolved_reloc = TRUE;
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-s390.c binutils-2.14.90.0.7/bfd/elf64-s390.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-s390.c 2003-08-21 09:28:48.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf64-s390.c 2004-04-20 01:26:12.000000000 -0600
-@@ -2297,7 +2297,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-sh64.c binutils-2.14.90.0.7/bfd/elf64-sh64.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-sh64.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elf64-sh64.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1582,7 +1582,7 @@
- }
- else if (! howto->partial_inplace)
- {
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- relocation |= ((sym->st_other & STO_SH5_ISA32) != 0);
- }
- else if ((sec->flags & SEC_MERGE)
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-sparc.c binutils-2.14.90.0.7/bfd/elf64-sparc.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-sparc.c 2003-08-21 09:28:48.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf64-sparc.c 2004-04-20 01:26:12.000000000 -0600
-@@ -2070,7 +2070,7 @@
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-@@ -2247,16 +2247,8 @@
-
- if (is_plt)
- sec = splt;
-- else if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+
-+ if (bfd_is_abs_section (sec))
- indx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elf64-x86-64.c binutils-2.14.90.0.7/bfd/elf64-x86-64.c
---- binutils-2.14.90.0.7.orig/bfd/elf64-x86-64.c 2003-08-21 09:28:48.000000000 -0600
-+++ binutils-2.14.90.0.7/bfd/elf64-x86-64.c 2004-04-20 01:26:12.000000000 -0600
-@@ -1823,7 +1823,7 @@
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
-
-- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, sec, rel);
-+ relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
- }
- else
- {
-@@ -2048,16 +2048,7 @@
- {
- long sindx;
-
-- if (h == NULL)
-- sec = local_sections[r_symndx];
-- else
-- {
-- BFD_ASSERT (h->root.type == bfd_link_hash_defined
-- || (h->root.type
-- == bfd_link_hash_defweak));
-- sec = h->root.u.def.section;
-- }
-- if (sec != NULL && bfd_is_abs_section (sec))
-+ if (bfd_is_abs_section (sec))
- sindx = 0;
- else if (sec == NULL || sec->owner == NULL)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/elfxx-ia64.c binutils-2.14.90.0.7/bfd/elfxx-ia64.c
---- binutils-2.14.90.0.7.orig/bfd/elfxx-ia64.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/elfxx-ia64.c 2004-04-20 01:26:12.000000000 -0600
-@@ -3849,9 +3849,11 @@
- if (r_symndx < symtab_hdr->sh_info)
- {
- /* Reloc against local symbol. */
-+ asection *msec;
- sym = local_syms + r_symndx;
- sym_sec = local_sections[r_symndx];
-- value = _bfd_elf_rela_local_sym (output_bfd, sym, sym_sec, rel);
-+ msec = sym_sec;
-+ value = _bfd_elf_rela_local_sym (output_bfd, sym, &msec, rel);
- if ((sym_sec->flags & SEC_MERGE)
- && ELF_ST_TYPE (sym->st_info) == STT_SECTION
- && sym_sec->sec_info_type == ELF_INFO_TYPE_MERGE)
-@@ -3862,7 +3864,6 @@
- if (loc_h && ! loc_h->sec_merge_done)
- {
- struct elfNN_ia64_dyn_sym_info *dynent;
-- asection *msec;
-
- for (dynent = loc_h->info; dynent; dynent = dynent->next)
- {
-diff -urN binutils-2.14.90.0.7.orig/bfd/opncls.c binutils-2.14.90.0.7/bfd/opncls.c
---- binutils-2.14.90.0.7.orig/bfd/opncls.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/opncls.c 2004-04-20 01:26:11.000000000 -0600
-@@ -150,6 +150,13 @@
- {
- bfd *nbfd;
- const bfd_target *target_vec;
-+ struct stat s;
-+
-+ if (stat (filename, &s) == 0)
-+ if (S_ISDIR(s.st_mode)) {
-+ bfd_set_error (bfd_error_file_not_recognized);
-+ return NULL;
-+ }
-
- nbfd = _bfd_new_bfd ();
- if (nbfd == NULL)
-diff -urN binutils-2.14.90.0.7.orig/binutils/objcopy.c binutils-2.14.90.0.7/binutils/objcopy.c
---- binutils-2.14.90.0.7.orig/binutils/objcopy.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/binutils/objcopy.c 2004-04-20 01:26:12.000000000 -0600
-@@ -27,6 +27,7 @@
- #include "libiberty.h"
- #include "budbg.h"
- #include "filenames.h"
-+#include "elf-bfd.h"
- #include <sys/stat.h>
-
- /* A list of symbols to explicitly strip out, or to keep. A linked
-@@ -385,6 +386,7 @@
- -g --strip-debug Remove all debugging symbols & sections\n\
- --strip-unneeded Remove all symbols not needed by relocations\n\
- -N --strip-symbol <name> Do not copy symbol <name>\n\
-+ --only-keep-debug Strip everything but the debug information\n\
- -K --keep-symbol <name> Only copy symbol <name>\n\
- -L --localize-symbol <name> Force symbol <name> to be marked as a local\n\
- -G --keep-global-symbol <name> Localize all symbols except <name>\n\
-@@ -457,6 +459,7 @@
- -s --strip-all Remove all symbol and relocation information\n\
- -g -S -d --strip-debug Remove all debugging symbols & sections\n\
- --strip-unneeded Remove all symbols not needed by relocations\n\
-+ --only-keep-debug Strip everything but the debug information\n\
- -N --strip-symbol=<name> Do not copy symbol <name>\n\
- -K --keep-symbol=<name> Only copy symbol <name>\n\
- -x --discard-all Remove all non-global symbols\n\
-@@ -734,7 +737,7 @@
- return FALSE;
- }
-
-- return strip_symbols == STRIP_NONDEBUG ? TRUE : FALSE;
-+ return FALSE;
- }
-
- /* Choose which symbol entries to copy; put the result in OSYMS.
-@@ -1806,6 +1809,13 @@
-
- if (p != NULL && p->set_flags)
- flags = p->flags | (flags & (SEC_HAS_CONTENTS | SEC_RELOC));
-+ else if (strip_symbols == STRIP_NONDEBUG && (flags & SEC_ALLOC) != 0)
-+ {
-+ flags &= ~(SEC_HAS_CONTENTS | SEC_LOAD);
-+ if (obfd->xvec->flavour == bfd_target_elf_flavour)
-+ elf_section_type (osection) = SHT_NOBITS;
-+ }
-+
- if (!bfd_set_section_flags (obfd, osection, flags))
- {
- err = _("flags");
-@@ -1926,6 +1936,8 @@
- }
-
- bfd_set_reloc (obfd, osection, relcount == 0 ? NULL : relpp, relcount);
-+ if (relcount == 0)
-+ free (relpp);
- }
-
- isection->_cooked_size = isection->_raw_size;
-diff -urN binutils-2.14.90.0.7.orig/binutils/readelf.c binutils-2.14.90.0.7/binutils/readelf.c
---- binutils-2.14.90.0.7.orig/binutils/readelf.c 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/binutils/readelf.c 2004-04-20 01:26:12.000000000 -0600
-@@ -6055,7 +6055,7 @@
-
- bytes = section->sh_size;
-
-- if (bytes == 0)
-+ if (bytes == 0 || section->sh_type == SHT_NOBITS)
- {
- printf (_("\nSection '%s' has no data to dump.\n"),
- SECTION_NAME (section));
-diff -urN binutils-2.14.90.0.7.orig/gprof/gprof.texi binutils-2.14.90.0.7/gprof/gprof.texi
---- binutils-2.14.90.0.7.orig/gprof/gprof.texi 2002-08-01 18:49:32.000000000 -0600
-+++ binutils-2.14.90.0.7/gprof/gprof.texi 2004-04-20 01:26:11.000000000 -0600
-@@ -137,6 +137,10 @@
- If more than one profile file is specified, the @code{gprof}
- output shows the sum of the profile information in the given profile files.
-
-+If you use gcc 2.95.x or 3.0 to compile your binaries, you may need
-+to add the @samp{-fprofile-arcs} to the compile command line in order
-+for the call graphs to be properly stored in gmon.out.
-+
- @code{Gprof} calculates the amount of time spent in each routine.
- Next, these times are propagated along the edges of the call graph.
- Cycles are discovered, and calls into a cycle are made to share the time
-@@ -181,7 +185,7 @@
- @c man end
-
- @c man begin SEEALSO
--monitor(3), profil(2), cc(1), prof(1), and the Info entry for @file{gprof}.
-+profil(2), cc(1), prof(1), and the Info entry for @file{gprof}.
-
- ``An Execution Profiler for Modular Programs'',
- by S. Graham, P. Kessler, M. McKusick;
-@@ -267,6 +271,11 @@
- options. The same option, @samp{-pg}, alters either compilation or linking
- to do what is necessary for profiling. Here are examples:
-
-+If you use gcc 2.95.x or 3.0.x, you may need to add the
-+@samp{-fprofile-arcs} option to the compile line along with @samp{-pg}
-+in order to allow the call-graphs to be properly included in the gmon.out
-+file.
-+
- @example
- cc -g -c myprog.c utils.c -pg
- cc -o myprog myprog.o utils.o -pg
-diff -urN binutils-2.14.90.0.7.orig/ld/Makefile.am binutils-2.14.90.0.7/ld/Makefile.am
---- binutils-2.14.90.0.7.orig/ld/Makefile.am 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/ld/Makefile.am 2004-04-20 01:26:11.000000000 -0600
-@@ -19,7 +19,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-diff -urN binutils-2.14.90.0.7.orig/ld/Makefile.in binutils-2.14.90.0.7/ld/Makefile.in
---- binutils-2.14.90.0.7.orig/ld/Makefile.in 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/ld/Makefile.in 2004-04-20 01:26:11.000000000 -0600
-@@ -128,7 +128,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-diff -urN binutils-2.14.90.0.7.orig/ld/emultempl/elf32.em binutils-2.14.90.0.7/ld/emultempl/elf32.em
---- binutils-2.14.90.0.7.orig/ld/emultempl/elf32.em 2003-08-21 09:28:48.000000000 -0600
-+++ binutils-2.14.90.0.7/ld/emultempl/elf32.em 2004-04-20 01:26:11.000000000 -0600
-@@ -679,6 +679,8 @@
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, l->name,
- force))
- break;
-@@ -855,6 +857,8 @@
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
- if (! (bfd_elf${ELFSIZE}_size_dynamic_sections
- (output_bfd, command_line.soname, rpath,
- command_line.filter_shlib,
-diff -urN binutils-2.14.90.0.7.orig/ltmain.sh binutils-2.14.90.0.7/ltmain.sh
---- binutils-2.14.90.0.7.orig/ltmain.sh 2002-03-22 15:06:16.000000000 -0700
-+++ binutils-2.14.90.0.7/ltmain.sh 2004-04-20 01:26:12.000000000 -0600
-@@ -4413,6 +4413,10 @@
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-+ if test -n "$linkname"; then
-+ $show "(cd $output_objdir && $rm ../$linkname && $LN_S $output_objdir/$linkname ../$linkname)"
-+ $run eval '(cd $output_objdir && $rm ../$linkname && $LN_S $output_objdir/$linkname ../$linkname)' || exit $?
-+ fi
- ;;
- esac
- exit 0
-diff -urN binutils-2.14.90.0.7.orig/opcodes/Makefile.am binutils-2.14.90.0.7/opcodes/Makefile.am
---- binutils-2.14.90.0.7.orig/opcodes/Makefile.am 2003-10-29 10:37:49.000000000 -0700
-+++ binutils-2.14.90.0.7/opcodes/Makefile.am 2004-04-20 01:26:12.000000000 -0600
-@@ -284,7 +284,7 @@
-
- libopcodes_la_SOURCES = dis-buf.c disassemble.c dis-init.c
- libopcodes_la_DEPENDENCIES = $(OFILES) ../bfd/libbfd.la
--libopcodes_la_LIBADD = $(OFILES) @WIN32LIBADD@ ../bfd/libbfd.la
-+libopcodes_la_LIBADD = $(OFILES) @WIN32LIBADD@ -L../bfd -lbfd
- libopcodes_la_LDFLAGS = -release $(VERSION) @WIN32LDFLAGS@
-
- # libtool will build .libs/libopcodes.a. We create libopcodes.a in
-diff -urN binutils-2.14.90.0.7.orig/opcodes/Makefile.in binutils-2.14.90.0.7/opcodes/Makefile.in
---- binutils-2.14.90.0.7.orig/opcodes/Makefile.in 2003-10-29 10:37:49.000000000 -0700
-+++ binutils-2.14.90.0.7/opcodes/Makefile.in 2004-04-20 01:26:12.000000000 -0600
-@@ -394,7 +394,7 @@
-
- libopcodes_la_SOURCES = dis-buf.c disassemble.c dis-init.c
- libopcodes_la_DEPENDENCIES = $(OFILES) ../bfd/libbfd.la
--libopcodes_la_LIBADD = $(OFILES) @WIN32LIBADD@ ../bfd/libbfd.la
-+libopcodes_la_LIBADD = $(OFILES) @WIN32LIBADD@ -L../bfd -lbfd
- libopcodes_la_LDFLAGS = -release $(VERSION) @WIN32LDFLAGS@
-
- # libtool will build .libs/libopcodes.a. We create libopcodes.a in
-@@ -593,7 +593,7 @@
- all-recursive install-data-recursive install-exec-recursive \
- installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
- check-recursive installcheck-recursive info-recursive dvi-recursive:
-- @set fnord $(MAKEFLAGS); amf=$$2; \
-+ @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
-@@ -613,7 +613,7 @@
-
- mostlyclean-recursive clean-recursive distclean-recursive \
- maintainer-clean-recursive:
-- @set fnord $(MAKEFLAGS); amf=$$2; \
-+ @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
-diff -urN binutils-2.14.90.0.7.orig/opcodes/alpha-opc.c binutils-2.14.90.0.7/opcodes/alpha-opc.c
---- binutils-2.14.90.0.7.orig/opcodes/alpha-opc.c 2003-01-21 11:21:34.000000000 -0700
-+++ binutils-2.14.90.0.7/opcodes/alpha-opc.c 2004-04-20 01:26:11.000000000 -0600
-@@ -1105,7 +1105,8 @@
- { "wmb", MFC(0x18,0x4400), BASE, ARG_NONE },
- { "fetch", MFC(0x18,0x8000), BASE, { ZA, PRB } },
- { "fetch_m", MFC(0x18,0xA000), BASE, { ZA, PRB } },
-- { "rpcc", MFC(0x18,0xC000), BASE, { RA } },
-+ { "rpcc", MFC(0x18,0xC000), BASE, { RA, ZB } },
-+ { "rpcc", MFC(0x18,0xC000), BASE, { RA, RB } }, /* ev6 una */
- { "rc", MFC(0x18,0xE000), BASE, { RA } },
- { "ecb", MFC(0x18,0xE800), BASE, { ZA, PRB } }, /* ev56 una */
- { "rs", MFC(0x18,0xF000), BASE, { RA } },
-diff -urN binutils-2.14.90.0.7.orig/opcodes/m68k-opc.c binutils-2.14.90.0.7/opcodes/m68k-opc.c
---- binutils-2.14.90.0.7.orig/opcodes/m68k-opc.c 2003-10-29 10:37:49.000000000 -0700
-+++ binutils-2.14.90.0.7/opcodes/m68k-opc.c 2004-04-20 01:26:12.000000000 -0600
-@@ -847,15 +847,15 @@
- {"fmoved", two(0xF000, 0x7400), two(0xF1C0, 0xFC7F), "IiF7ws", cfloat },
- {"fmovel", two(0xF000, 0x4000), two(0xF1C0, 0xFC7F), "Ii;lF7", mfloat },
- {"fmovel", two(0xF000, 0x6000), two(0xF1C0, 0xFC7F), "IiF7$l", mfloat },
-+/* FIXME: the next two variants should not permit moving an address
-+ register to anything but the floating point instruction register. */
-+{"fmovel", two(0xF000, 0xA000), two(0xF1C0, 0xE3FF), "Iis8%s", mfloat },
-+{"fmovel", two(0xF000, 0x8000), two(0xF1C0, 0xE3FF), "Ii*ls8", mfloat },
- {"fmovel", two(0xF000, 0x4000), two(0xF1C0, 0xFC7F), "IibsF7", cfloat },
- {"fmovel", two(0xF000, 0x6000), two(0xF1C0, 0xFC7F), "IiF7bs", cfloat },
- /* Move the FP control registers */
- {"fmovel", two(0xF000, 0xA000), two(0xF1C0, 0xE3FF), "Iis8ps", cfloat },
- {"fmovel", two(0xF000, 0x8000), two(0xF1C0, 0xE3FF), "Iibss8", cfloat },
--/* FIXME: the next two variants should not permit moving an address
-- register to anything but the floating point instruction register. */
--{"fmovel", two(0xF000, 0xA000), two(0xF1C0, 0xE3FF), "Iis8%s", mfloat },
--{"fmovel", two(0xF000, 0x8000), two(0xF1C0, 0xE3FF), "Ii*ls8", mfloat },
- {"fmovep", two(0xF000, 0x4C00), two(0xF1C0, 0xFC7F), "Ii;pF7", mfloat },
- {"fmovep", two(0xF000, 0x6C00), two(0xF1C0, 0xFC00), "IiF7~pkC", mfloat },
- {"fmovep", two(0xF000, 0x7C00), two(0xF1C0, 0xFC0F), "IiF7~pDk", mfloat },
+++ /dev/null
-diff -urN binutils-2.14.90.0.7.orig/bfd/config.bfd binutils-2.14.90.0.7/bfd/config.bfd
---- binutils-2.14.90.0.7.orig/bfd/config.bfd 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/config.bfd 2004-04-20 01:37:12.000000000 -0600
-@@ -121,7 +121,7 @@
- targ_defvec=ecoffalpha_little_vec
- targ_selvecs=bfd_elf64_alpha_vec
- ;;
-- alpha*-*-linux-gnu* | alpha*-*-elf*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc* | alpha*-*-elf*)
- targ_defvec=bfd_elf64_alpha_vec
- targ_selvecs=ecoffalpha_little_vec
- ;;
-@@ -131,7 +131,7 @@
- alpha*-*-*)
- targ_defvec=ecoffalpha_little_vec
- ;;
-- ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-elf* | ia64*-*-kfreebsd*-gnu)
-+ ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-elf* | ia64*-*-linux-uclibc* | ia64*-*-kfreebsd*-gnu)
- targ_defvec=bfd_elf64_ia64_little_vec
- targ_selvecs="bfd_elf64_ia64_big_vec bfd_efi_app_ia64_vec"
- ;;
-@@ -214,7 +214,7 @@
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-- armeb-*-elf | arm*b-*-linux-gnu*)
-+ armeb-*-elf | arm*b-*-linux-gnu* | arm*b-*-linux-uclibc*)
- targ_defvec=bfd_elf32_bigarm_vec
- targ_selvecs=bfd_elf32_littlearm_vec
- ;;
-@@ -222,7 +222,7 @@
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-- arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-conix* | arm*-*-uclinux* | arm-*-kfreebsd*-gnu)
-+ arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-conix* | arm*-*-uclinux* | arm*-*-linux-uclibc* | arm-*-kfreebsd*-gnu)
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-@@ -355,7 +355,7 @@
- ;;
-
- #ifdef BFD64
-- hppa*64*-*-linux-gnu*)
-+ hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*)
- targ_defvec=bfd_elf64_hppa_linux_vec
- targ_selvecs=bfd_elf64_hppa_vec
- ;;
-@@ -366,7 +366,7 @@
- ;;
- #endif
-
-- hppa*-*-linux-gnu* | hppa*-*-netbsd*)
-+ hppa*-*-linux-gnu* | hppa*-*-netbsd* | hppa*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_hppa_linux_vec
- targ_selvecs=bfd_elf32_hppa_vec
- ;;
-@@ -488,7 +488,7 @@
- targ_selvecs=bfd_elf32_i386_vec
- targ_underscore=yes
- ;;
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- targ_defvec=bfd_elf32_i386_vec
- targ_selvecs="i386linux_vec bfd_efi_app_ia32_vec"
- targ64_selvecs=bfd_elf64_x86_64_vec
-@@ -502,7 +502,7 @@
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386netbsd_vec i386coff_vec bfd_efi_app_ia32_vec"
- ;;
-- x86_64-*-linux-gnu*)
-+ x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386linux_vec bfd_efi_app_ia32_vec"
- ;;
-@@ -662,7 +662,7 @@
- targ_selvecs=bfd_elf32_m68k_vec
- targ_underscore=yes
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_m68k_vec
- targ_selvecs=m68klinux_vec
- ;;
-@@ -929,7 +929,8 @@
- ;;
- #endif
- powerpc-*-*bsd* | powerpc-*-elf* | powerpc-*-sysv4* | powerpc-*-eabi* | \
-- powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-rtems* | \
-+ powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-linux-uclibc* | \
-+ powerpc-*-rtems* | \
- powerpc-*-chorus* | powerpc-*-vxworks* | powerpc-*-windiss*)
- targ_defvec=bfd_elf32_powerpc_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpcle_vec ppcboot_vec"
-@@ -961,8 +962,8 @@
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
- ;;
- powerpcle-*-elf* | powerpcle-*-sysv4* | powerpcle-*-eabi* | \
-- powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-vxworks* |\
-- powerpcle-*-rtems*)
-+ powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-linux-uclibc* |\
-+ powerpcle-*-vxworks* | powerpcle-*-rtems*)
- targ_defvec=bfd_elf32_powerpcle_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
- targ64_selvecs="bfd_elf64_powerpc_vec bfd_elf64_powerpcle_vec"
-@@ -1110,7 +1111,7 @@
- targ_selvecs="bfd_elf32_sparc_vec sunos_big_vec"
- targ_underscore=yes
- ;;
-- sparc-*-linux-gnu*)
-+ sparc-*-linux-gnu* | sparc-*-linux-uclibc*)
- targ_defvec=bfd_elf32_sparc_vec
- targ_selvecs="sparclinux_vec bfd_elf64_sparc_vec sunos_big_vec"
- ;;
-@@ -1157,7 +1158,7 @@
- targ_defvec=sunos_big_vec
- targ_underscore=yes
- ;;
-- sparc64-*-linux-gnu*)
-+ sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_sparc_vec
- targ_selvecs="bfd_elf32_sparc_vec sparclinux_vec sunos_big_vec"
- ;;
-diff -urN binutils-2.14.90.0.7.orig/bfd/configure binutils-2.14.90.0.7/bfd/configure
---- binutils-2.14.90.0.7.orig/bfd/configure 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/configure 2004-04-20 01:32:29.000000000 -0600
-@@ -1699,6 +1699,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-@@ -5278,7 +5283,7 @@
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -5338,7 +5343,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
- ;;
-@@ -5388,7 +5393,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/hp300bsd.h"'
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/m68klinux.h"'
- ;;
-diff -urN binutils-2.14.90.0.7.orig/bfd/configure.in binutils-2.14.90.0.7/bfd/configure.in
---- binutils-2.14.90.0.7.orig/bfd/configure.in 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/bfd/configure.in 2004-04-20 01:32:29.000000000 -0600
-@@ -178,7 +178,7 @@
- alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -259,7 +259,7 @@
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
- changequote(,)dnl
-- i[3-7]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- changequote([,])dnl
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
-@@ -312,7 +312,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/hp300bsd.h"'
- ;;
-- m68*-*-linux-gnu*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/m68klinux.h"'
- ;;
-diff -urN binutils-2.14.90.0.7.orig/config.sub binutils-2.14.90.0.7/config.sub
---- binutils-2.14.90.0.7.orig/config.sub 2003-08-21 09:28:47.000000000 -0600
-+++ binutils-2.14.90.0.7/config.sub 2004-04-20 01:32:29.000000000 -0600
-@@ -118,7 +118,7 @@
- # Here we must recognize all the valid KERNEL-OS combinations.
- maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
- case $maybe_os in
-- nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
-+ nto-qnx* | linux-gnu* | linux-uclibc* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
-@@ -1131,7 +1131,8 @@
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-+ | -mingw32* | -linux-gnu* | -linux-uclibc* \
-+ | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-diff -urN binutils-2.14.90.0.7.orig/configure binutils-2.14.90.0.7/configure
---- binutils-2.14.90.0.7.orig/configure 2003-10-29 10:38:23.000000000 -0700
-+++ binutils-2.14.90.0.7/configure 2004-04-20 01:32:29.000000000 -0600
-@@ -1276,6 +1276,18 @@
- i[3456789]86-*-freebsd* | i[3456789]86-*-kfreebsd*-gnu)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
-+ i[3456789]86-*-linux-uclibc)
-+ # This section makes it possible to build newlib natively on linux.
-+ # If we are using a cross compiler then don't configure newlib.
-+ if test x${is_cross_compiler} != xno ; then
-+ noconfigdirs="$noconfigdirs target-newlib"
-+ fi
-+ noconfigdirs="$noconfigdirs target-libgloss"
-+ # If we are not using a cross compiler, do configure newlib.
-+ # Note however, that newlib will only be configured in this situation
-+ # if the --with-newlib option has been given, because otherwise
-+ # 'target-newlib' will appear in skipdirs.
-+ ;;
- i[3456789]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
-diff -urN binutils-2.14.90.0.7.orig/configure.in binutils-2.14.90.0.7/configure.in
---- binutils-2.14.90.0.7.orig/configure.in 2003-10-29 10:38:20.000000000 -0700
-+++ binutils-2.14.90.0.7/configure.in 2004-04-20 01:32:29.000000000 -0600
-@@ -515,6 +515,19 @@
- i[[3456789]]86-*-freebsd* | i[[3456789]]86-*-kfreebsd*-gnu)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
-+ i[3456789]86-*-linux-uclibc)
-+ # This section makes it possible to build newlib natively on linux.
-+ # If we are using a cross compiler then don't configure newlib.
-+ if test x${is_cross_compiler} != xno ; then
-+ noconfigdirs="$noconfigdirs target-newlib"
-+ fi
-+ noconfigdirs="$noconfigdirs target-libgloss"
-+ build_modules=
-+ # If we are not using a cross compiler, do configure newlib.
-+ # Note however, that newlib will only be configured in this situation
-+ # if the --with-newlib option has been given, because otherwise
-+ # 'target-newlib' will appear in skipdirs.
-+ ;;
- i[[3456789]]86-*-linux*)
- # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
- # not build java stuff by default.
-diff -urN binutils-2.14.90.0.7.orig/demangler/configure binutils-2.14.90.0.7/demangler/configure
---- binutils-2.14.90.0.7.orig/demangler/configure 2003-10-29 10:38:20.000000000 -0700
-+++ binutils-2.14.90.0.7/demangler/configure 2004-04-20 01:32:29.000000000 -0600
-@@ -1380,6 +1380,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -urN binutils-2.14.90.0.7.orig/gas/configure binutils-2.14.90.0.7/gas/configure
---- binutils-2.14.90.0.7.orig/gas/configure 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/gas/configure 2004-04-20 01:37:58.000000000 -0600
-@@ -3215,6 +3215,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-@@ -4028,6 +4033,7 @@
- alpha*-*-osf*) fmt=ecoff ;;
- alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux-gnu*) fmt=elf em=linux ;;
-+ alpha*-*-linux-uclibc*) fmt=elf em=linux ;;
- alpha*-*-netbsd*) fmt=elf em=nbsd ;;
- alpha*-*-openbsd*) fmt=elf em=obsd ;;
-
-@@ -4044,6 +4050,7 @@
- arm*-*-conix*) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm*-*-linux-gnu*) fmt=elf em=linux ;;
-+ arm*-*-linux-uclibc*) fmt=elf em=linux ;;
- arm*-*-uclinux*) fmt=elf em=linux ;;
- arm-*-netbsdelf*) fmt=elf em=nbsd ;;
- arm-*-*n*bsd*) fmt=aout em=nbsd ;;
-@@ -4058,6 +4065,7 @@
- avr-*-*) fmt=elf ;;
-
- cris-*-linux-gnu*) fmt=multi bfd_gas=yes em=linux ;;
-+ cris-*-linux-uclibc*) fmt=multi bfd_gas=yes em=linux ;;
- cris-*-*) fmt=multi bfd_gas=yes ;;
-
- d10v-*-*) fmt=elf ;;
-@@ -4114,7 +4122,9 @@
- i386-*-linux*oldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux-gnu*) fmt=elf em=linux ;;
-+ i386-*-linux-uclibc*) fmt=elf em=linux ;;
- x86_64-*-linux-gnu*) fmt=elf em=linux ;;
-+ x86_64-*-linux-uclibc*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=coff em=lynx ;;
- i386-*-sysv[45]*) fmt=elf ;;
- i386-*-solaris*) fmt=elf ;;
-@@ -4175,6 +4185,7 @@
- ia64-*-elf*) fmt=elf ;;
- ia64-*-aix*) fmt=elf em=ia64aix ;;
- ia64-*-linux-gnu*) fmt=elf em=linux ;;
-+ ia64-*-linux-uclibc*) fmt=elf em=linux ;;
- ia64-*-hpux*) fmt=elf em=hpux ;;
- ia64-*-netbsd*) fmt=elf em=nbsd ;;
-
-@@ -4201,6 +4212,7 @@
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux-gnu*) fmt=elf em=linux ;;
-+ m68k-*-linux-uclibc*) fmt=elf em=linux ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-lynxos*) fmt=coff em=lynx ;;
- m68k-*-netbsdelf*) fmt=elf em=nbsd ;;
-@@ -4257,7 +4269,7 @@
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
- ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
-- ppc-*-linux-gnu*) fmt=elf em=linux
-+ ppc-*-linux-uclibc* | ppc-*-linux-gnu*) fmt=elf em=linux
- case "$endian" in
- big) ;;
- *) { { echo "$as_me:$LINENO: error: GNU/Linux must be configured big endian" >&5
-@@ -4286,7 +4298,9 @@
- ppc-*-kaos*) fmt=elf ;;
-
- s390x-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390x-*-linux-uclibc*) fmt=elf em=linux ;;
- s390-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390-*-linux-uclibc*) fmt=elf em=linux ;;
-
- sh*-*-linux*) fmt=elf em=linux
- case ${cpu} in
-@@ -4319,6 +4333,7 @@
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux-gnu*) fmt=elf em=linux ;;
-+ sparc-*-linux-uclibc*) fmt=elf em=linux ;;
- sparc-*-lynxos*) fmt=coff em=lynx ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf) fmt=elf ;;
-diff -urN binutils-2.14.90.0.7.orig/gas/configure.in binutils-2.14.90.0.7/gas/configure.in
---- binutils-2.14.90.0.7.orig/gas/configure.in 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/gas/configure.in 2004-04-20 01:38:23.000000000 -0600
-@@ -192,6 +192,7 @@
- alpha*-*-osf*) fmt=ecoff ;;
- alpha*-*-linuxecoff*) fmt=ecoff ;;
- alpha*-*-linux-gnu*) fmt=elf em=linux ;;
-+ alpha*-*-linux-uclibc*) fmt=elf em=linux ;;
- alpha*-*-netbsd*) fmt=elf em=nbsd ;;
- alpha*-*-openbsd*) fmt=elf em=obsd ;;
-
-@@ -208,6 +209,7 @@
- arm*-*-conix*) fmt=elf ;;
- arm-*-linux*aout*) fmt=aout em=linux ;;
- arm*-*-linux-gnu*) fmt=elf em=linux ;;
-+ arm*-*-linux-uclibc*) fmt=elf em=linux ;;
- arm*-*-uclinux*) fmt=elf em=linux ;;
- arm-*-netbsdelf*) fmt=elf em=nbsd ;;
- arm-*-*n*bsd*) fmt=aout em=nbsd ;;
-@@ -222,6 +224,7 @@
- avr-*-*) fmt=elf ;;
-
- cris-*-linux-gnu*) fmt=multi bfd_gas=yes em=linux ;;
-+ cris-*-linux-uclibc*) fmt=multi bfd_gas=yes em=linux ;;
- cris-*-*) fmt=multi bfd_gas=yes ;;
-
- d10v-*-*) fmt=elf ;;
-@@ -278,7 +281,9 @@
- i386-*-linux*oldld) fmt=aout em=linux ;;
- i386-*-linux*coff*) fmt=coff em=linux ;;
- i386-*-linux-gnu*) fmt=elf em=linux ;;
-+ i386-*-linux-uclibc*) fmt=elf em=linux ;;
- x86_64-*-linux-gnu*) fmt=elf em=linux ;;
-+ x86_64-*-linux-uclibc*) fmt=elf em=linux ;;
- i386-*-lynxos*) fmt=coff em=lynx ;;
- changequote(,)dnl
- i386-*-sysv[45]*) fmt=elf ;;
-@@ -332,6 +337,7 @@
- ia64-*-elf*) fmt=elf ;;
- ia64-*-aix*) fmt=elf em=ia64aix ;;
- ia64-*-linux-gnu*) fmt=elf em=linux ;;
-+ ia64-*-linux-uclibc*) fmt=elf em=linux ;;
- ia64-*-hpux*) fmt=elf em=hpux ;;
- ia64-*-netbsd*) fmt=elf em=nbsd ;;
-
-@@ -358,6 +364,7 @@
- m68k-*-hpux*) fmt=hp300 em=hp300 ;;
- m68k-*-linux*aout*) fmt=aout em=linux ;;
- m68k-*-linux-gnu*) fmt=elf em=linux ;;
-+ m68k-*-linux-uclibc*) fmt=elf em=linux ;;
- m68k-*-gnu*) fmt=elf ;;
- m68k-*-lynxos*) fmt=coff em=lynx ;;
- m68k-*-netbsdelf*) fmt=elf em=nbsd ;;
-@@ -412,7 +419,7 @@
- ppc-*-beos*) fmt=coff ;;
- ppc-*-*n*bsd* | ppc-*-elf*) fmt=elf ;;
- ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;;
-- ppc-*-linux-gnu*) fmt=elf em=linux
-+ ppc-*-linux-uclibc* | ppc-*-linux-gnu*) fmt=elf em=linux
- case "$endian" in
- big) ;;
- *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
-@@ -434,7 +441,9 @@
- ppc-*-kaos*) fmt=elf ;;
-
- s390x-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390x-*-linux-uclibc*) fmt=elf em=linux ;;
- s390-*-linux-gnu*) fmt=elf em=linux ;;
-+ s390-*-linux-uclibc*) fmt=elf em=linux ;;
-
- sh*-*-linux*) fmt=elf em=linux
- case ${cpu} in
-@@ -467,6 +476,7 @@
- sparc-*-coff) fmt=coff ;;
- sparc-*-linux*aout*) fmt=aout em=linux ;;
- sparc-*-linux-gnu*) fmt=elf em=linux ;;
-+ sparc-*-linux-uclibc*) fmt=elf em=linux ;;
- sparc-*-lynxos*) fmt=coff em=lynx ;;
- sparc-fujitsu-none) fmt=aout ;;
- sparc-*-elf) fmt=elf ;;
-diff -urN binutils-2.14.90.0.7.orig/ld/configure binutils-2.14.90.0.7/ld/configure
---- binutils-2.14.90.0.7.orig/ld/configure 2003-05-05 15:46:49.000000000 -0600
-+++ binutils-2.14.90.0.7/ld/configure 2004-04-20 01:32:29.000000000 -0600
-@@ -1578,6 +1578,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-diff -urN binutils-2.14.90.0.7.orig/ld/configure.tgt binutils-2.14.90.0.7/ld/configure.tgt
---- binutils-2.14.90.0.7.orig/ld/configure.tgt 2003-10-29 10:37:48.000000000 -0700
-+++ binutils-2.14.90.0.7/ld/configure.tgt 2004-04-20 01:32:29.000000000 -0600
-@@ -30,6 +30,7 @@
- targ_extra_emuls="criself crislinux"
- targ_extra_libpath=$targ_extra_emuls ;;
- cris-*-linux-gnu*) targ_emul=crislinux ;;
-+cris-*-linux-uclibc*) targ_emul=crislinux ;;
- cris-*-*) targ_emul=criself
- targ_extra_emuls="crisaout crislinux"
- targ_extra_libpath=$targ_extra_emuls ;;
-@@ -59,14 +60,16 @@
- tdir_elf32_sparc=`echo ${targ_alias} | sed -e 's/aout//'`
- tdir_sun4=sparc-sun-sunos4
- ;;
--sparc64-*-linux-gnu*) targ_emul=elf64_sparc
-+sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*) \
-+ targ_emul=elf64_sparc
- targ_extra_emuls="elf32_sparc sparclinux sun4"
- targ_extra_libpath=elf32_sparc
- tdir_elf32_sparc=`echo ${targ_alias} | sed -e 's/64//'`
- tdir_sparclinux=${tdir_elf32_sparc}aout
- tdir_sun4=sparc-sun-sunos4
- ;;
--sparc*-*-linux-gnu*) targ_emul=elf32_sparc
-+sparc*-*-linux-gnu* | sparc*-*-linux-uclibc*) \
-+ targ_emul=elf32_sparc
- targ_extra_emuls="sparclinux elf64_sparc sun4"
- targ_extra_libpath=elf64_sparc
- tdir_sparclinux=${targ_alias}aout
-@@ -125,7 +128,7 @@
- m68*-ericsson-ose) targ_emul=sun3 ;;
- m68*-apple-aux*) targ_emul=m68kaux ;;
- *-tandem-none) targ_emul=st2000 ;;
--i370-*-elf* | i370-*-linux-gnu*) targ_emul=elf32i370 ;;
-+i370-*-elf* | i370-*-linux-gnu* | i370-*-linux-uclibc*) targ_emul=elf32i370 ;;
- i[3-7]86-*-nto-qnx*) targ_emul=i386nto ;;
- i[3-7]86-*-vsta) targ_emul=vsta ;;
- i[3-7]86-go32-rtems*) targ_emul=i386go32 ;;
-@@ -149,14 +152,16 @@
- tdir_elf_i386=`echo ${targ_alias} | sed -e 's/aout//'`
- ;;
- i[3-7]86-*-linux*oldld) targ_emul=i386linux; targ_extra_emuls=elf_i386 ;;
--i[3-7]86-*-linux-gnu*) targ_emul=elf_i386
-+i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*) \
-+ targ_emul=elf_i386
- targ_extra_emuls=i386linux
- if test x${want64} = xtrue; then
- targ_extra_emuls="$targ_extra_emuls elf_x86_64"
- fi
- tdir_i386linux=${targ_alias}aout
- ;;
--x86_64-*-linux-gnu*) targ_emul=elf_x86_64
-+x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*) \
-+ targ_emul=elf_x86_64
- targ_extra_emuls="elf_i386 i386linux"
- targ_extra_libpath=elf_i386
- tdir_i386linux=`echo ${targ_alias}aout | sed -e 's/x86_64/i386/'`
-@@ -256,10 +261,13 @@
- arm9e-*-elf) targ_emul=armelf ;;
- arm-*-oabi) targ_emul=armelf_oabi ;;
- arm*b-*-linux-gnu*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
-+arm*b-*-linux-uclibc*) targ_emul=armelfb_linux; targ_extra_emuls=armelfb ;;
- arm*-*-linux-gnu*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+arm*-*-linux-uclibc*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- arm*-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- arm*-*-conix*) targ_emul=armelf ;;
--thumb-*-linux-gnu* | thumb-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-+thumb-*-linux-gnu* | thumb-*-linux-uclibc* | thumb-*-uclinux*) \
-+ targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
- strongarm-*-coff) targ_emul=armcoff ;;
- strongarm-*-elf) targ_emul=armelf ;;
- strongarm-*-kaos*) targ_emul=armelf ;;
-@@ -360,7 +368,8 @@
- targ_extra_emuls=m68kelf
- tdir_m68kelf=`echo ${targ_alias} | sed -e 's/aout//'`
- ;;
--m68k-*-linux-gnu*) targ_emul=m68kelf
-+m68k-*-linux-gnu* | m68k-*-linux-uclibc*) \
-+ targ_emul=m68kelf
- targ_extra_emuls=m68klinux
- tdir_m68klinux=`echo ${targ_alias} | sed -e 's/linux/linuxaout/'`
- ;;
-@@ -376,9 +385,9 @@
- m68*-*-psos*) targ_emul=m68kpsos ;;
- m68*-*-rtemscoff*) targ_emul=m68kcoff ;;
- m68*-*-rtems*) targ_emul=m68kelf ;;
--hppa*64*-*-linux-gnu*) targ_emul=hppa64linux ;;
-+hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*) targ_emul=hppa64linux ;;
- hppa*64*-*) targ_emul=elf64hppa ;;
--hppa*-*-linux-gnu*) targ_emul=hppalinux ;;
-+hppa*-*-linux-gnu* | hppa*-*-linux-uclibc*) targ_emul=hppalinux ;;
- hppa*-*-*elf*) targ_emul=hppaelf ;;
- hppa*-*-lites*) targ_emul=hppaelf ;;
- hppa*-*-netbsd*) targ_emul=hppanbsd ;;
-@@ -422,16 +431,20 @@
- mips*-*-rtems*) targ_emul=elf32ebmip ;;
- mips*el-*-vxworks*) targ_emul=elf32elmip ;;
- mips*-*-vxworks*) targ_emul=elf32ebmip ;;
--mips64*el-*-linux-gnu*) targ_emul=elf32ltsmipn32
-+mips64*el-*-linux-gnu* | mips64*el-*-linux-uclibc*) \
-+ targ_emul=elf32ltsmipn32
- targ_extra_emuls="elf32btsmipn32 elf32ltsmip elf32btsmip elf64ltsmip elf64btsmip"
- ;;
--mips64*-*-linux-gnu*) targ_emul=elf32btsmipn32
-+mips64*-*-linux-gnu* | mips64*-*-linux-uclibc*) \
-+ targ_emul=elf32btsmipn32
- targ_extra_emuls="elf32ltsmipn32 elf32btsmip elf32ltsmip elf64btsmip elf64ltsmip"
- ;;
--mips*el-*-linux-gnu*) targ_emul=elf32ltsmip
-+mips*el-*-linux-gnu* | mips*el-*-linux-uclibc*) \
-+ targ_emul=elf32ltsmip
- targ_extra_emuls="elf32btsmip elf32ltsmipn32 elf64ltsmip elf32btsmipn32 elf64btsmip"
- ;;
--mips*-*-linux-gnu*) targ_emul=elf32btsmip
-+mips*-*-linux-gnu* | mips*-*-linux-uclibc*) \
-+ targ_emul=elf32btsmip
- targ_extra_emuls="elf32ltsmip elf32btsmipn32 elf64btsmip elf32ltsmipn32 elf64ltsmip"
- ;;
- mips*-*-lnews*) targ_emul=mipslnews ;;
-@@ -454,6 +467,10 @@
- alpha*-*-linux-gnu*) targ_emul=elf64alpha targ_extra_emuls=alpha
- tdir_alpha=`echo ${targ_alias} | sed -e 's/linux/linuxecoff/'`
- ;;
-+alpha*-*-linux-uclibc*) targ_emul=elf64alpha targ_extra_emuls=alpha
-+ # The following needs to be checked...
-+ tdir_alpha=`echo ${targ_alias} | sed -e 's/linux/linuxecoff/'`
-+ ;;
- alpha*-*-osf*) targ_emul=alpha ;;
- alpha*-*-gnu*) targ_emul=elf64alpha ;;
- alpha*-*-netware*) targ_emul=alpha ;;
-diff -urN binutils-2.14.90.0.7.orig/libtool.m4 binutils-2.14.90.0.7/libtool.m4
---- binutils-2.14.90.0.7.orig/libtool.m4 2003-05-05 15:46:46.000000000 -0600
-+++ binutils-2.14.90.0.7/libtool.m4 2004-04-20 01:32:29.000000000 -0600
-@@ -645,6 +645,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
-diff -urN binutils-2.14.90.0.7.orig/ltconfig binutils-2.14.90.0.7/ltconfig
---- binutils-2.14.90.0.7.orig/ltconfig 2003-10-29 10:37:47.000000000 -0700
-+++ binutils-2.14.90.0.7/ltconfig 2004-04-20 01:32:29.000000000 -0600
-@@ -603,6 +603,7 @@
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
- linux-gnu*) ;;
-+linux-uclibc*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-
-@@ -1259,6 +1260,24 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-+linux-uclibc*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ # Note: copied from linux-gnu, and may not be appropriate.
-+ hardcode_into_libs=yes
-+ # Assume using the uClibc dynamic linker.
-+ dynamic_linker="uClibc ld.so"
-+ ;;
-+
- netbsd*)
- need_lib_prefix=no
- need_version=no
+++ /dev/null
-Get around an odd build failure.
-diff -urN binutils-2.14.90.0.6/configure binutils-2.14.90.0.6-uClibc/configure
---- binutils-2.14.90.0.6/configure 2003-08-21 10:29:32.000000000 -0500
-+++ binutils-2.14.90.0.6-uClibc/configure 2004-01-07 05:43:40.000000000 -0600
-@@ -906,6 +906,11 @@
- fi
-
-
-+case "$target" in
-+ *-*-*-uclibc*)
-+ build_modules=
-+ ;;
-+esac
- ################################################################################
-
- srcname="gnu development package"
-diff -urN binutils-2.14.90.0.6/configure.in binutils-2.14.90.0.6-uClibc/configure.in
---- binutils-2.14.90.0.6/configure.in 2003-08-21 10:29:30.000000000 -0500
-+++ binutils-2.14.90.0.6-uClibc/configure.in 2004-01-07 05:44:02.000000000 -0600
-@@ -178,6 +178,11 @@
- fi
-
-
-+case "$target" in
-+ *-*-*-uclibc*)
-+ build_modules=
-+ ;;
-+esac
- ################################################################################
-
- srcname="gnu development package"
+++ /dev/null
-diff -urN binutils-2.14.90.0.6/bfd/doc/Makefile.am binutils-2.14.90.0.6.new/bfd/doc/Makefile.am
---- binutils-2.14.90.0.6/bfd/doc/Makefile.am 2003-07-23 10:08:09.000000000 -0500
-+++ binutils-2.14.90.0.6.new/bfd/doc/Makefile.am 2004-03-01 16:05:16.000000000 -0600
-@@ -55,10 +55,10 @@
- MKDOC = chew$(EXEEXT_FOR_BUILD)
-
- $(MKDOC): chew.o
-- $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)
-+ $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS_FOR_BUILD) $(LOADLIBES) $(LDFLAGS)
-
- chew.o: chew.c
-- $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c
-+ $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/chew.c
-
- protos: libbfd.h libcoff.h bfd.h
-
-diff -urN binutils-2.14.90.0.6/bfd/doc/Makefile.in binutils-2.14.90.0.6.new/bfd/doc/Makefile.in
---- binutils-2.14.90.0.6/bfd/doc/Makefile.in 2003-07-23 10:08:09.000000000 -0500
-+++ binutils-2.14.90.0.6.new/bfd/doc/Makefile.in 2004-03-01 16:05:03.000000000 -0600
-@@ -469,10 +469,10 @@
-
-
- $(MKDOC): chew.o
-- $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS) $(LOADLIBES) $(LDFLAGS)
-+ $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(CFLAGS_FOR_BUILD) $(LOADLIBES) $(LDFLAGS)
-
- chew.o: chew.c
-- $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c
-+ $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/chew.c
-
- protos: libbfd.h libcoff.h bfd.h
-
+++ /dev/null
-ac_cv_func_setvbuf_reversed=no
+++ /dev/null
-# Boa v0.94 configuration file
-# File format has not changed from 0.93
-# File format has changed little from 0.92
-# version changes are noted in the comments
-#
-# The Boa configuration file is parsed with a lex/yacc or flex/bison
-# generated parser. If it reports an error, the line number will be
-# provided; it should be easy to spot. The syntax of each of these
-# rules is very simple, and they can occur in any order. Where possible
-# these directives mimic those of NCSA httpd 1.3; I saw no reason to
-# introduce gratuitous differences.
-
-# $Id$
-
-# The "ServerRoot" is not in this configuration file. It can be compiled
-# into the server (see defines.h) or specified on the command line with
-# the -c option, for example:
-#
-# boa -c /usr/local/boa
-
-
-# Port: The port Boa runs on. The default port for http servers is 80.
-# If it is less than 1024, the server must be started as root.
-
-Port 80
-
-# Listen: the Internet address to bind(2) to. If you leave it out,
-# it takes the behavior before 0.93.17.2, which is to bind to all
-# addresses (INADDR_ANY). You only get one "Listen" directive,
-# if you want service on multiple IP addresses, you have three choices:
-# 1. Run boa without a "Listen" directive
-# a. All addresses are treated the same; makes sense if the addresses
-# are localhost, ppp, and eth0.
-# b. Use the VirtualHost directive below to point requests to different
-# files. Should be good for a very large number of addresses (web
-# hosting clients).
-# 2. Run one copy of boa per IP address, each has its own configuration
-# with a "Listen" directive. No big deal up to a few tens of addresses.
-# Nice separation between clients.
-# The name you provide gets run through inet_aton(3), so you have to use dotted
-# quad notation. This configuration is too important to trust some DNS.
-
-#Listen 192.68.0.5
-
-# User: The name or UID the server should run as.
-# Group: The group name or GID the server should run as.
-
-User nobody
-Group nobody
-
-# ServerAdmin: The email address where server problems should be sent.
-# Note: this is not currently used, except as an environment variable
-# for CGIs.
-
-#ServerAdmin root@localhost
-
-# ErrorLog: The location of the error log file. If this does not start
-# with /, it is considered relative to the server root.
-# Set to /dev/null if you don't want errors logged.
-# If unset, defaults to /dev/stderr
-
-ErrorLog /var/log/boa/error_log
-# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
-# is somewhat experimental and might fail under heavy load.
-# "Usual libc implementations of printf will stall the whole
-# process if the receiving end of a pipe stops reading."
-#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"
-
-# AccessLog: The location of the access log file. If this does not
-# start with /, it is considered relative to the server root.
-# Comment out or set to /dev/null (less effective) to disable
-# Access logging.
-
-AccessLog /var/log/boa/access_log
-# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
-# is somewhat experimental and might fail under heavy load.
-# "Usual libc implementations of printf will stall the whole
-# process if the receiving end of a pipe stops reading."
-#AccessLog "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"
-
-# UseLocaltime: Logical switch. Uncomment to use localtime
-# instead of UTC time
-#UseLocaltime
-
-# VerboseCGILogs: this is just a logical switch.
-# It simply notes the start and stop times of cgis in the error log
-# Comment out to disable.
-
-#VerboseCGILogs
-
-# ServerName: the name of this server that should be sent back to
-# clients if different than that returned by gethostname + gethostbyname
-
-#ServerName www.your.org.here
-
-# VirtualHost: a logical switch.
-# Comment out to disable.
-# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
-# become /var/www/IP-A.
-# Example: http://localhost/ becomes /var/www/127.0.0.1
-#
-# Not used until version 0.93.17.2. This "feature" also breaks commonlog
-# output rules, it prepends the interface number to each access_log line.
-# You are expected to fix that problem with a postprocessing script.
-
-#VirtualHost
-
-# DocumentRoot: The root directory of the HTML documents.
-# Comment out to disable server non user files.
-
-DocumentRoot /var/www
-
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is recieved.
-
-UserDir public_html
-
-# DirectoryIndex: Name of the file to use as a pre-written HTML
-# directory index. Please MAKE AND USE THESE FILES. On the
-# fly creation of directory indexes can be _slow_.
-# Comment out to always use DirectoryMaker
-
-DirectoryIndex index.html
-
-# DirectoryMaker: Name of program used to create a directory listing.
-# Comment out to disable directory listings. If both this and
-# DirectoryIndex are commented out, accessing a directory will give
-# an error (though accessing files in the directory are still ok).
-
-DirectoryMaker /usr/lib/boa/boa_indexer
-
-# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
-# has been commented out, the the on-the-fly indexing of Boa can be used
-# to generate indexes of directories. Be warned that the output is
-# extremely minimal and can cause delays when slow disks are used.
-# Note: The DirectoryCache must be writable by the same user/group that
-# Boa runs as.
-
-# DirectoryCache /var/spool/boa/dircache
-
-# KeepAliveMax: Number of KeepAlive requests to allow per connection
-# Comment out, or set to 0 to disable keepalive processing
-
-KeepAliveMax 1000
-
-# KeepAliveTimeout: seconds to wait before keepalive connection times out
-
-KeepAliveTimeout 10
-
-# MimeTypes: This is the file that is used to generate mime type pairs
-# and Content-Type fields for boa.
-# Set to /dev/null if you do not want to load a mime types file.
-# Do *not* comment out (better use AddType!)
-
-MimeTypes /etc/mime.types
-
-# DefaultType: MIME type used if the file extension is unknown, or there
-# is no file extension.
-
-DefaultType text/plain
-
-# AddType: adds types without editing mime.types
-# Example: AddType type extension [extension ...]
-
-# Uncomment the next line if you want .cgi files to execute from anywhere
-#AddType application/x-httpd-cgi cgi
-
-# Redirect, Alias, and ScriptAlias all have the same semantics -- they
-# match the beginning of a request and take appropriate action. Use
-# Redirect for other servers, Alias for the same server, and ScriptAlias
-# to enable directories for script execution.
-
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Example: Redirect /bar http://elsewhere/feh/bar
-
-# Aliases: Aliases one path to another.
-# Example: Alias /path1/bar /path2/foo
-
-# Alias /doc /usr/doc
-
-# ScriptAlias: Maps a virtual path to a directory for serving scripts
-# Example: ScriptAlias /htbin/ /www/htbin/
-
-ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
-
+++ /dev/null
---- bridge-utils-0.9.6/libbridge/Makefile.in.dist 2004-03-01 20:55:52.000000000 -0600
-+++ bridge-utils-0.9.6/libbridge/Makefile.in 2004-03-01 20:56:23.000000000 -0600
-@@ -5,7 +5,7 @@
- RANLIB=@RANLIB@
-
- CC=@CC@
--CFLAGS = -Wall -g $(KERNEL_HEADERS)
-+CFLAGS = -Wall -g @CFLAGS@ $(KERNEL_HEADERS)
-
- prefix=@prefix@
- exec_prefix=@exec_prefix@
+++ /dev/null
---- dnsmasq-1.18/config.h.dist 2004-03-01 22:25:12.000000000 -0600
-+++ dnsmasq-1.18/config.h 2004-03-01 22:26:50.000000000 -0600
-@@ -126,7 +126,9 @@
-
- /* Must preceed __linux__ since uClinux defines __linux__ too. */
- #if defined(__uClinux__) || defined(__UCLIBC__)
-+#ifndef __UCLIBC_HAS_IPV6__
- #undef HAVE_LINUX_IPV6_PROC
-+#endif
- #define HAVE_GETOPT_LONG
- #undef HAVE_ARC4RANDOM
- #define HAVE_RANDOM
-diff -x CVS -urN dnsmasq-1.18/option.c dnsmasq.old/option.c
---- dnsmasq-1.18/option.c 2003-11-05 08:22:18.000000000 -0600
-+++ dnsmasq.old/option.c 2004-01-05 23:40:11.000000000 -0600
-@@ -578,8 +578,8 @@
- #ifdef HAVE_IPV6
- else if (tmp->source_addr.sa.sa_family == AF_INET6)
- tmp->source_addr.in6.sin6_port = htons(*query_port);
-- }
- #endif
-+ }
- }
-
- if (*if_addrs)
+++ /dev/null
---- file-4.04/magic/Makefile.am.orig 2003-10-02 13:46:41.000000000 -0600
-+++ file-4.04/magic/Makefile.am 2003-10-02 13:47:38.000000000 -0600
-@@ -16,10 +16,10 @@
- done >> $@
-
- magic.mgc: magic
-- $(top_builddir)/src/file -C -m magic
-+ /usr/bin/file -C -m magic
-
- magic.mime.mgc: magic.mime
-- $(top_builddir)/src/file -C -m magic.mime
-+ /usr/bin/file -C -m magic.mime
-
- magic_FRAGMENTS = \
- Magdir/acorn \
---- file-4.04/magic/Makefile.in.orig 2003-10-02 13:52:23.000000000 -0600
-+++ file-4.04/magic/Makefile.in 2003-10-02 13:52:53.000000000 -0600
-@@ -477,10 +477,10 @@
- done >> $@
-
- magic.mgc: magic
-- $(top_builddir)/src/file -C -m magic
-+ /usr/bin/file -C -m magic
-
- magic.mime.mgc: magic.mime
-- $(top_builddir)/src/file -C -m magic.mime
-+ /usr/bin/file -C -m magic.mime
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
- .NOEXPORT:
+++ /dev/null
-diff -urN gcc-3.3.3/boehm-gc/config.sub gcc-3.3.3-new/boehm-gc/config.sub
---- gcc-3.3.3/boehm-gc/config.sub 2002-02-11 22:37:53.000000000 -0600
-+++ gcc-3.3.3-new/boehm-gc/config.sub 2004-02-16 21:12:16.000000000 -0600
-@@ -118,7 +118,7 @@
- # Here we must recognize all the valid KERNEL-OS combinations.
- maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
- case $maybe_os in
-- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
-+ nto-qnx* | linux-gnu* | linux-uclibc* | storm-chaos* | os2-emx* | windows32-*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
-@@ -1089,7 +1089,8 @@
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-+ | -mingw32* | -linux-gnu* | -linux-uclibc* \
-+ | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-diff -urN gcc-3.3.3/config.sub gcc-3.3.3-new/config.sub
---- gcc-3.3.3/config.sub 2003-01-30 17:25:36.000000000 -0600
-+++ gcc-3.3.3-new/config.sub 2004-02-16 21:12:16.000000000 -0600
-@@ -118,7 +118,7 @@
- # Here we must recognize all the valid KERNEL-OS combinations.
- maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
- case $maybe_os in
-- nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
-+ nto-qnx* | linux-gnu* | linux-uclibc* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
-@@ -1112,7 +1112,8 @@
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-+ | -mingw32* | -linux-gnu* | -linux-uclibc* \
-+ | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-diff -urN gcc-3.3.3/gcc/config/arm/linux-elf.h gcc-3.3.3-new/gcc/config/arm/linux-elf.h
---- gcc-3.3.3/gcc/config/arm/linux-elf.h 2003-09-16 10:39:23.000000000 -0500
-+++ gcc-3.3.3-new/gcc/config/arm/linux-elf.h 2004-02-16 21:12:16.000000000 -0600
-@@ -78,6 +78,18 @@
- "%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s"
-
- #undef LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define LINK_SPEC "%{h*} %{version:-v} \
-+ %{b} %{Wl,*:%*} \
-+ %{static:-Bstatic} \
-+ %{shared:-shared} \
-+ %{symbolic:-Bsymbolic} \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0} \
-+ -X \
-+ %{mbig-endian:-EB}" \
-+ SUBTARGET_EXTRA_LINK_SPEC
-+#else
- #define LINK_SPEC "%{h*} %{version:-v} \
- %{b} %{Wl,*:%*} \
- %{static:-Bstatic} \
-@@ -88,6 +100,7 @@
- -X \
- %{mbig-endian:-EB}" \
- SUBTARGET_EXTRA_LINK_SPEC
-+#endif
-
- #define TARGET_OS_CPP_BUILTINS() \
- do { \
-diff -urN gcc-3.3.3/gcc/config/cris/linux.h gcc-3.3.3-new/gcc/config/cris/linux.h
---- gcc-3.3.3/gcc/config/cris/linux.h 2003-03-10 21:01:35.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/cris/linux.h 2004-02-16 21:12:16.000000000 -0600
-@@ -81,6 +81,25 @@
- #undef CRIS_DEFAULT_CPU_VERSION
- #define CRIS_DEFAULT_CPU_VERSION CRIS_CPU_NG
-
-+#ifdef USE_UCLIBC
-+
-+#undef CRIS_SUBTARGET_VERSION
-+#define CRIS_SUBTARGET_VERSION " - cris-axis-linux-uclibc"
-+
-+#undef CRIS_LINK_SUBTARGET_SPEC
-+#define CRIS_LINK_SUBTARGET_SPEC \
-+ "-mcrislinux\
-+ -rpath-link include/asm/../..%s\
-+ %{shared} %{static}\
-+ %{symbolic:-Bdynamic} %{shlib:-Bdynamic} %{static:-Bstatic}\
-+ %{!shared: \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}}} \
-+ %{!r:%{O2|O3: --gc-sections}}"
-+
-+#else /* USE_UCLIBC */
-+
- #undef CRIS_SUBTARGET_VERSION
- #define CRIS_SUBTARGET_VERSION " - cris-axis-linux-gnu"
-
-@@ -95,6 +114,8 @@
- %{!shared:%{!static:%{rdynamic:-export-dynamic}}}\
- %{!r:%{O2|O3: --gc-sections}}"
-
-+#endif /* USE_UCLIBC */
-+
-
- /* Node: Run-time Target */
-
-diff -urN gcc-3.3.3/gcc/config/cris/t-linux-uclibc gcc-3.3.3-new/gcc/config/cris/t-linux-uclibc
---- gcc-3.3.3/gcc/config/cris/t-linux-uclibc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/cris/t-linux-uclibc 2004-02-16 21:12:16.000000000 -0600
-@@ -0,0 +1,3 @@
-+T_CFLAGS = -DUSE_UCLIBC
-+TARGET_LIBGCC2_CFLAGS += -fPIC
-+CRTSTUFF_T_CFLAGS_S = $(TARGET_LIBGCC2_CFLAGS)
-diff -urN gcc-3.3.3/gcc/config/i386/linux.h gcc-3.3.3-new/gcc/config/i386/linux.h
---- gcc-3.3.3/gcc/config/i386/linux.h 2003-11-14 00:46:12.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/i386/linux.h 2004-02-16 21:12:16.000000000 -0600
-@@ -136,6 +136,15 @@
- %{static:-static}}}"
- #endif
- #else
-+#if defined USE_UCLIBC
-+#define LINK_SPEC "-m elf_i386 %{shared:-shared} \
-+ %{!shared: \
-+ %{!ibcs: \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+ %{static:-static}}}"
-+#else
- #define LINK_SPEC "-m elf_i386 %{shared:-shared} \
- %{!shared: \
- %{!ibcs: \
-@@ -144,6 +153,7 @@
- %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
- %{static:-static}}}"
- #endif
-+#endif
-
- /* A C statement (sans semicolon) to output to the stdio stream
- FILE the assembler definition of uninitialized global DECL named
-diff -urN gcc-3.3.3/gcc/config/mips/linux.h gcc-3.3.3-new/gcc/config/mips/linux.h
---- gcc-3.3.3/gcc/config/mips/linux.h 2003-12-23 02:58:00.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/mips/linux.h 2004-02-16 21:12:16.000000000 -0600
-@@ -175,6 +175,17 @@
-
- /* Borrowed from sparc/linux.h */
- #undef LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define LINK_SPEC \
-+ "%(endian_spec) \
-+ %{shared:-shared} \
-+ %{!shared: \
-+ %{!ibcs: \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+ %{static:-static}}}"
-+#else
- #define LINK_SPEC \
- "%(endian_spec) \
- %{shared:-shared} \
-@@ -184,6 +195,7 @@
- %{rdynamic:-export-dynamic} \
- %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}} \
- %{static:-static}}}"
-+#endif
-
- #undef SUBTARGET_ASM_SPEC
- #define SUBTARGET_ASM_SPEC "\
-diff -urN gcc-3.3.3/gcc/config/sh/linux.h gcc-3.3.3-new/gcc/config/sh/linux.h
---- gcc-3.3.3/gcc/config/sh/linux.h 2003-11-06 17:13:33.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/sh/linux.h 2004-02-16 21:12:16.000000000 -0600
-@@ -44,12 +44,21 @@
- #undef SUBTARGET_LINK_EMUL_SUFFIX
- #define SUBTARGET_LINK_EMUL_SUFFIX "_linux"
- #undef SUBTARGET_LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define SUBTARGET_LINK_SPEC \
-+ "%{shared:-shared} \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+ %{static:-static}"
-+#else
- #define SUBTARGET_LINK_SPEC \
- "%{shared:-shared} \
- %{!static: \
- %{rdynamic:-export-dynamic} \
- %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
- %{static:-static}"
-+#endif
-
- /* The GNU C++ standard library requires that these macros be defined. */
- #undef CPLUSPLUS_CPP_SPEC
-diff -urN gcc-3.3.3/gcc/config/sh/t-linux-uclibc gcc-3.3.3-new/gcc/config/sh/t-linux-uclibc
---- gcc-3.3.3/gcc/config/sh/t-linux-uclibc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/sh/t-linux-uclibc 2004-02-16 21:12:16.000000000 -0600
-@@ -0,0 +1,16 @@
-+T_CFLAGS = -DUSE_UCLIBC
-+
-+# Don't run fixproto
-+STMP_FIXPROTO =
-+
-+TARGET_LIBGCC2_CFLAGS = -fpic
-+LIB1ASMFUNCS_CACHE = _ic_invalidate
-+
-+LIB2FUNCS_EXTRA=
-+
-+MULTILIB_OPTIONS= $(MULTILIB_ENDIAN) m3e/m4
-+MULTILIB_DIRNAMES=
-+MULTILIB_MATCHES =
-+MULTILIB_EXCEPTIONS=
-+
-+EXTRA_MULTILIB_PARTS= crtbegin.o crtend.o crtbeginS.o crtendS.o
-diff -urN gcc-3.3.3/gcc/config/sh/t-sh64-uclibc gcc-3.3.3-new/gcc/config/sh/t-sh64-uclibc
---- gcc-3.3.3/gcc/config/sh/t-sh64-uclibc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/sh/t-sh64-uclibc 2004-02-16 21:12:16.000000000 -0600
-@@ -0,0 +1,13 @@
-+EXTRA_MULTILIB_PARTS= crtbegin.o crtend.o
-+
-+LIB1ASMFUNCS = \
-+ _sdivsi3 _sdivsi3_i4 _udivsi3 _udivsi3_i4 _set_fpscr \
-+ _shcompact_call_trampoline _shcompact_return_trampoline \
-+ _shcompact_incoming_args _ic_invalidate _nested_trampoline \
-+ _push_pop_shmedia_regs \
-+ _udivdi3 _divdi3 _umoddi3 _moddi3
-+
-+MULTILIB_OPTIONS = $(MULTILIB_ENDIAN) m5-32media-nofpu/m5-compact/m5-compact-nofpu/m5-64media/m5-64media-nofpu
-+MULTILIB_DIRNAMES= $(MULTILIB_ENDIAN) nofpu compact nofpu/compact media64 nofpu/media64
-+MULTILIB_MATCHES=
-+MULTILIB_EXCEPTIONS=
-diff -urN gcc-3.3.3/gcc/config/t-linux-uclibc gcc-3.3.3-new/gcc/config/t-linux-uclibc
---- gcc-3.3.3/gcc/config/t-linux-uclibc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/t-linux-uclibc 2004-02-16 21:12:16.000000000 -0600
-@@ -0,0 +1,23 @@
-+T_CFLAGS = -DUSE_UCLIBC
-+
-+# Don't run fixproto
-+STMP_FIXPROTO =
-+
-+# Compile crtbeginS.o and crtendS.o with pic.
-+CRTSTUFF_T_CFLAGS_S = $(CRTSTUFF_T_CFLAGS) -fPIC
-+# Compile libgcc2.a with pic.
-+TARGET_LIBGCC2_CFLAGS = -fPIC
-+
-+# Override t-slibgcc-elf-ver to export some libgcc symbols with
-+# the symbol versions that glibc used.
-+SHLIB_MAPFILES += $(srcdir)/config/libgcc-glibc.ver
-+
-+# Use unwind-dw2-fde-glibc
-+#LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde-glibc.c \
-+# $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c
-+#LIB2ADDEHDEP = unwind.inc unwind-dw2-fde.h unwind-dw2-fde.c
-+
-+# Use unwind-dw2-fde
-+LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde.c \
-+ $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c
-+LIB2ADDEHDEP = unwind.inc unwind-dw2-fde.h
-diff -urN gcc-3.3.3/gcc/config.gcc gcc-3.3.3-new/gcc/config.gcc
---- gcc-3.3.3/gcc/config.gcc 2004-01-21 00:06:00.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config.gcc 2004-02-16 21:12:16.000000000 -0600
-@@ -697,6 +697,17 @@
- extra_parts=""
- use_collect2=yes
- ;;
-+arm*-*-linux-uclibc*) # ARM GNU/Linux with ELF - uClibc
-+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
-+ tmake_file="t-slibgcc-elf-ver t-linux-uclibc arm/t-linux"
-+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-+ gnu_ld=yes
-+ case x${enable_threads} in
-+ x | xyes | xpthreads | xposix)
-+ thread_file='posix'
-+ ;;
-+ esac
-+ ;;
- arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
- tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
-@@ -772,6 +783,10 @@
- tmake_file="cris/t-cris cris/t-elfmulti"
- gas=yes
- ;;
-+cris-*-linux-uclibc*)
-+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
-+ tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux-uclibc"
-+ ;;
- cris-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
- tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
-@@ -1173,6 +1188,11 @@
- thread_file='single'
- fi
- ;;
-+i[34567]86-*-linux*uclibc*) # Intel 80386's running GNU/Linux
-+ # with ELF format using uClibc
-+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
-+ tmake_file="t-slibgcc-elf-ver t-linux-uclibc i386/t-crtstuff"
-+ ;;
- i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
- # with ELF format using glibc 2
- # aka GNU/Linux C library 6
-@@ -1883,6 +1903,16 @@
- tm_file="elfos.h ${tm_file} mips/netbsd.h"
- tmake_file="${tmake_file} mips/t-netbsd"
- ;;
-+mips*-*-linux-uclibc*) # Linux MIPS, either endian. uClibc
-+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
-+ case $machine in
-+ mipsisa32*-*)
-+ target_cpu_default="MASK_SOFT_FLOAT"
-+ tm_defines="MIPS_ISA_DEFAULT=32"
-+ ;;
-+ esac
-+ tmake_file="t-slibgcc-elf-ver t-linux-uclibc mips/t-linux"
-+ ;;
- mips*-*-linux*) # Linux MIPS, either endian.
- tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
- case $machine in
-@@ -2129,6 +2159,11 @@
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
- ;;
-+powerpc-*-linux-uclibc*)
-+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
-+ out_file=rs6000/rs6000.c
-+ tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux-uclibc rs6000/t-ppccomm"
-+ ;;
- powerpc-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- out_file=rs6000/rs6000.c
-@@ -2313,10 +2348,18 @@
- tmake_file="${tmake_file} sh/t-le"
- ;;
- esac
-- tmake_file="${tmake_file} sh/t-linux"
-+ case $machine in
-+ *-*-linux-uclibc*) tmake_file="${tmake_file} sh/t-linux-uclibc" ;;
-+ *) tmake_file="${tmake_file} sh/t-linux" ;;
-+ esac
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
- gas=yes gnu_ld=yes
- case $machine in
-+ sh64*-*-linux-uclibc*)
-+ tmake_file="${tmake_file} sh/t-sh64-uclibc"
-+ tm_file="${tm_file} sh/sh64.h"
-+ extra_headers="shmedia.h ushmedia.h sshmedia.h"
-+ ;;
- sh64*)
- tmake_file="${tmake_file} sh/t-sh64"
- tm_file="${tm_file} sh/sh64.h"
-diff -urN gcc-3.3.3/libstdc++-v3/aclocal.m4 gcc-3.3.3-new/libstdc++-v3/aclocal.m4
---- gcc-3.3.3/libstdc++-v3/aclocal.m4 2004-01-12 10:18:44.000000000 -0600
-+++ gcc-3.3.3-new/libstdc++-v3/aclocal.m4 2004-02-16 21:12:16.000000000 -0600
-@@ -1216,6 +1216,9 @@
- dnl Default to "generic"
- if test x$enable_clocale_flag = xno; then
- case x${target_os} in
-+ xlinux-uclibc*)
-+ enable_clocale_flag=uclibc
-+ ;;
- xlinux* | xgnu*)
- AC_EGREP_CPP([_GLIBCPP_ok], [
- #include <features.h>
-@@ -1339,6 +1342,41 @@
- CTIME_CC=config/locale/generic/time_members.cc
- CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
- ;;
-+ xuclibc)
-+ AC_MSG_RESULT(uclibc)
-+
-+ # Declare intention to use gettext, and add support for specific
-+ # languages.
-+ # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT
-+ ALL_LINGUAS="de fr"
-+
-+ # Don't call AM-GNU-GETTEXT here. Instead, assume glibc.
-+ AC_CHECK_PROG(check_msgfmt, msgfmt, yes, no)
-+ if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then
-+ USE_NLS=yes
-+ fi
-+ # Export the build objects.
-+ for ling in $ALL_LINGUAS; do \
-+ glibcpp_MOFILES="$glibcpp_MOFILES $ling.mo"; \
-+ glibcpp_POFILES="$glibcpp_POFILES $ling.po"; \
-+ done
-+ AC_SUBST(glibcpp_MOFILES)
-+ AC_SUBST(glibcpp_POFILES)
-+
-+ CLOCALE_H=config/locale/uclibc/c_locale.h
-+ CLOCALE_CC=config/locale/uclibc/c_locale.cc
-+ CCODECVT_H=config/locale/uclibc/codecvt_specializations.h
-+ CCODECVT_CC=config/locale/uclibc/codecvt_members.cc
-+ CCOLLATE_CC=config/locale/uclibc/collate_members.cc
-+ CCTYPE_CC=config/locale/uclibc/ctype_members.cc
-+ CMESSAGES_H=config/locale/uclibc/messages_members.h
-+ CMESSAGES_CC=config/locale/uclibc/messages_members.cc
-+ CMONEY_CC=config/locale/uclibc/monetary_members.cc
-+ CNUMERIC_CC=config/locale/uclibc/numeric_members.cc
-+ CTIME_H=config/locale/uclibc/time_members.h
-+ CTIME_CC=config/locale/uclibc/time_members.cc
-+ CLOCALE_INTERNAL_H=config/locale/uclibc/c++locale_internal.h
-+ ;;
- *)
- echo "$enable_clocale is an unknown locale package" 1>&2
- exit 1
-diff -urN gcc-3.3.3/libstdc++-v3/configure gcc-3.3.3-new/libstdc++-v3/configure
---- gcc-3.3.3/libstdc++-v3/configure 2004-01-12 10:18:45.000000000 -0600
-+++ gcc-3.3.3-new/libstdc++-v3/configure 2004-02-17 00:21:12.000000000 -0600
-@@ -2996,6 +2996,9 @@
-
- if test x$enable_clocale_flag = xno; then
- case x${target_os} in
-+ xlinux-uclibc*)
-+ enable_clocale_flag=uclibc
-+ ;;
- xlinux* | xgnu*)
- cat > conftest.$ac_ext <<EOF
- #line 3002 "configure"
-@@ -3182,6 +3185,70 @@
- CTIME_CC=config/locale/generic/time_members.cc
- CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
- ;;
-+ xuclibc)
-+ echo "$ac_t""uclibc" 1>&6
-+
-+ # Declare intention to use gettext, and add support for specific
-+ # languages.
-+ # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT
-+ ALL_LINGUAS="de fr"
-+
-+ # Don't call AM-GNU-GETTEXT here. Instead, assume glibc.
-+ # Extract the first word of "msgfmt", so it can be a program name with args.
-+set dummy msgfmt; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:3117: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_check_msgfmt'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ if test -n "$check_msgfmt"; then
-+ ac_cv_prog_check_msgfmt="$check_msgfmt" # Let the user override the test.
-+else
-+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-+ ac_dummy="$PATH"
-+ for ac_dir in $ac_dummy; do
-+ test -z "$ac_dir" && ac_dir=.
-+ if test -f $ac_dir/$ac_word; then
-+ ac_cv_prog_check_msgfmt="yes"
-+ break
-+ fi
-+ done
-+ IFS="$ac_save_ifs"
-+ test -z "$ac_cv_prog_check_msgfmt" && ac_cv_prog_check_msgfmt="no"
-+fi
-+fi
-+check_msgfmt="$ac_cv_prog_check_msgfmt"
-+if test -n "$check_msgfmt"; then
-+ echo "$ac_t""$check_msgfmt" 1>&6
-+else
-+ echo "$ac_t""no" 1>&6
-+fi
-+
-+ if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then
-+ USE_NLS=yes
-+ fi
-+ # Export the build objects.
-+ for ling in $ALL_LINGUAS; do \
-+ glibcpp_MOFILES="$glibcpp_MOFILES $ling.mo"; \
-+ glibcpp_POFILES="$glibcpp_POFILES $ling.po"; \
-+ done
-+
-+
-+
-+ CLOCALE_H=config/locale/uclibc/c_locale.h
-+ CLOCALE_CC=config/locale/uclibc/c_locale.cc
-+ CCODECVT_H=config/locale/uclibc/codecvt_specializations.h
-+ CCODECVT_CC=config/locale/uclibc/codecvt_members.cc
-+ CCOLLATE_CC=config/locale/uclibc/collate_members.cc
-+ CCTYPE_CC=config/locale/uclibc/ctype_members.cc
-+ CMESSAGES_H=config/locale/uclibc/messages_members.h
-+ CMESSAGES_CC=config/locale/uclibc/messages_members.cc
-+ CMONEY_CC=config/locale/uclibc/monetary_members.cc
-+ CNUMERIC_CC=config/locale/uclibc/numeric_members.cc
-+ CTIME_H=config/locale/uclibc/time_members.h
-+ CTIME_CC=config/locale/uclibc/time_members.cc
-+ CLOCALE_INTERNAL_H=config/locale/uclibc/c++locale_internal.h
-+ ;;
- *)
- echo "$enable_clocale is an unknown locale package" 1>&2
- exit 1
-@@ -4212,6 +4279,968 @@
- # GLIBCPP_CHECK_MATH_SUPPORT
-
- case "$target" in
-+ *-uclibc*)
-+ os_include_dir="os/uclibc"
-+ for ac_hdr in nan.h ieeefp.h endian.h sys/isa_defs.h \
-+ machine/endian.h machine/param.h sys/machine.h sys/types.h \
-+ fp.h locale.h float.h inttypes.h
-+do
-+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-+echo "configure:4224: checking for $ac_hdr" >&5
-+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4229 "configure"
-+#include "confdefs.h"
-+#include <$ac_hdr>
-+EOF
-+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-+{ (eval echo configure:4234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-+if test -z "$ac_err"; then
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=yes"
-+else
-+ echo "$ac_err" >&5
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_hdr 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+fi
-+done
-+
-+ SECTION_FLAGS='-ffunction-sections -fdata-sections'
-+
-+
-+ # If we're not using GNU ld, then there's no point in even trying these
-+ # tests. Check for that first. We should have already tested for gld
-+ # by now (in libtool), but require it now just to be safe...
-+ test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
-+ test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
-+
-+
-+ # The name set by libtool depends on the version of libtool. Shame on us
-+ # for depending on an impl detail, but c'est la vie. Older versions used
-+ # ac_cv_prog_gnu_ld, but now it's lt_cv_prog_gnu_ld, and is copied back on
-+ # top of with_gnu_ld (which is also set by --with-gnu-ld, so that actually
-+ # makes sense). We'll test with_gnu_ld everywhere else, so if that isn't
-+ # set (hence we're using an older libtool), then set it.
-+ if test x${with_gnu_ld+set} != xset; then
-+ if test x${ac_cv_prog_gnu_ld+set} != xset; then
-+ # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
-+ with_gnu_ld=no
-+ else
-+ with_gnu_ld=$ac_cv_prog_gnu_ld
-+ fi
-+ fi
-+
-+ # Start by getting the version number. I think the libtool test already
-+ # does some of this, but throws away the result.
-+
-+ ldver=`$LD --version 2>/dev/null | head -1 | \
-+ sed -e 's/GNU ld version \([0-9.][0-9.]*\).*/\1/'`
-+
-+ glibcpp_gnu_ld_version=`echo $ldver | \
-+ $AWK -F. '{ if (NF<3) $3=0; print ($1*100+$2)*100+$3 }'`
-+
-+ # Set --gc-sections.
-+ if test "$with_gnu_ld" = "notbroken"; then
-+ # GNU ld it is! Joy and bunny rabbits!
-+
-+ # All these tests are for C++; save the language and the compiler flags.
-+ # Need to do this so that g++ won't try to link in libstdc++
-+ ac_test_CFLAGS="${CFLAGS+set}"
-+ ac_save_CFLAGS="$CFLAGS"
-+ CFLAGS='-x c++ -Wl,--gc-sections'
-+
-+ # Check for -Wl,--gc-sections
-+ # XXX This test is broken at the moment, as symbols required for
-+ # linking are now in libsupc++ (not built yet.....). In addition,
-+ # this test has cored on solaris in the past. In addition,
-+ # --gc-sections doesn't really work at the moment (keeps on discarding
-+ # used sections, first .eh_frame and now some of the glibc sections for
-+ # iconv). Bzzzzt. Thanks for playing, maybe next time.
-+ echo $ac_n "checking for ld that supports -Wl,--gc-sections""... $ac_c" 1>&6
-+echo "configure:4312: checking for ld that supports -Wl,--gc-sections" >&5
-+ if test "$cross_compiling" = yes; then
-+ ac_sectionLDflags=yes
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4317 "configure"
-+#include "confdefs.h"
-+
-+ int main(void)
-+ {
-+ try { throw 1; }
-+ catch (...) { };
-+ return 0;
-+ }
-+
-+EOF
-+if { (eval echo configure:4328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-+then
-+ ac_sectionLDflags=yes
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -fr conftest*
-+ ac_sectionLDflags=no
-+fi
-+rm -fr conftest*
-+fi
-+
-+ if test "$ac_test_CFLAGS" = set; then
-+ CFLAGS="$ac_save_CFLAGS"
-+ else
-+ # this is the suspicious part
-+ CFLAGS=''
-+ fi
-+ if test "$ac_sectionLDflags" = "yes"; then
-+ SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS"
-+ fi
-+ echo "$ac_t""$ac_sectionLDflags" 1>&6
-+ fi
-+
-+ # Set linker optimization flags.
-+ if test x"$with_gnu_ld" = x"yes"; then
-+ OPT_LDFLAGS="-Wl,-O1 $OPT_LDFLAGS"
-+ fi
-+
-+
-+
-+
-+
-+ echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-+echo "configure:4362: checking for main in -lm" >&5
-+ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
-+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ ac_save_LIBS="$LIBS"
-+LIBS="-lm $LIBS"
-+cat > conftest.$ac_ext <<EOF
-+#line 4370 "configure"
-+#include "confdefs.h"
-+
-+int main() {
-+main()
-+; return 0; }
-+EOF
-+if { (eval echo configure:4377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_lib_$ac_lib_var=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_lib_$ac_lib_var=no"
-+fi
-+rm -f conftest*
-+LIBS="$ac_save_LIBS"
-+
-+fi
-+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_lib 1
-+EOF
-+
-+ LIBS="-lm $LIBS"
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+fi
-+
-+ for ac_func in nan copysignf
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:4407: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4412 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:4435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+LIBMATHOBJS="$LIBMATHOBJS ${ac_func}.lo"
-+fi
-+done
-+
-+
-+ for ac_func in __signbit
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:4464: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4469 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:4492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+LIBMATHOBJS="$LIBMATHOBJS signbit.lo"
-+fi
-+done
-+
-+ for ac_func in __signbitf
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:4520: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4525 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:4548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+LIBMATHOBJS="$LIBMATHOBJS signbitf.lo"
-+fi
-+done
-+
-+
-+ if test x$ac_cv_func_copysignl = x"yes"; then
-+ for ac_func in __signbitl
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:4578: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4583 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:4606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+LIBMATHOBJS="$LIBMATHOBJS signbitl.lo"
-+fi
-+done
-+
-+ fi
-+
-+ if test -n "$LIBMATHOBJS"; then
-+ need_libmath=yes
-+ fi
-+
-+
-+
-+if test "$need_libmath" = yes; then
-+ GLIBCPP_BUILD_LIBMATH_TRUE=
-+ GLIBCPP_BUILD_LIBMATH_FALSE='#'
-+else
-+ GLIBCPP_BUILD_LIBMATH_TRUE='#'
-+ GLIBCPP_BUILD_LIBMATH_FALSE=
-+fi
-+
-+
-+ enable_wchar_t=no
-+
-+ echo $ac_n "checking for mbstate_t""... $ac_c" 1>&6
-+echo "configure:4651: checking for mbstate_t" >&5
-+ cat > conftest.$ac_ext <<EOF
-+#line 4653 "configure"
-+#include "confdefs.h"
-+#include <wchar.h>
-+int main() {
-+mbstate_t teststate;
-+; return 0; }
-+EOF
-+if { (eval echo configure:4660: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
-+ have_mbstate_t=yes
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ have_mbstate_t=no
-+fi
-+rm -f conftest*
-+ echo "$ac_t""$have_mbstate_t" 1>&6
-+ if test x"$have_mbstate_t" = xyes; then
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_MBSTATE_T 1
-+EOF
-+
-+ fi
-+
-+ for ac_hdr in wchar.h
-+do
-+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-+echo "configure:4682: checking for $ac_hdr" >&5
-+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4687 "configure"
-+#include "confdefs.h"
-+#include <$ac_hdr>
-+EOF
-+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-+{ (eval echo configure:4692: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-+if test -z "$ac_err"; then
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=yes"
-+else
-+ echo "$ac_err" >&5
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_hdr 1
-+EOF
-+ ac_has_wchar_h=yes
-+else
-+ echo "$ac_t""no" 1>&6
-+ac_has_wchar_h=no
-+fi
-+done
-+
-+ for ac_hdr in wctype.h
-+do
-+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-+echo "configure:4723: checking for $ac_hdr" >&5
-+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4728 "configure"
-+#include "confdefs.h"
-+#include <$ac_hdr>
-+EOF
-+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-+{ (eval echo configure:4733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-+if test -z "$ac_err"; then
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=yes"
-+else
-+ echo "$ac_err" >&5
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_hdr 1
-+EOF
-+ ac_has_wctype_h=yes
-+else
-+ echo "$ac_t""no" 1>&6
-+ac_has_wctype_h=no
-+fi
-+done
-+
-+
-+ if test x"$ac_has_wchar_h" = xyes &&
-+ test x"$ac_has_wctype_h" = xyes &&
-+ test x"$enable_c_mbchar" != xno; then
-+
-+ echo $ac_n "checking for WCHAR_MIN and WCHAR_MAX""... $ac_c" 1>&6
-+echo "configure:4766: checking for WCHAR_MIN and WCHAR_MAX" >&5
-+ cat > conftest.$ac_ext <<EOF
-+#line 4768 "configure"
-+#include "confdefs.h"
-+#include <wchar.h>
-+int main() {
-+int i = WCHAR_MIN; int j = WCHAR_MAX;
-+; return 0; }
-+EOF
-+if { (eval echo configure:4775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
-+ has_wchar_minmax=yes
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ has_wchar_minmax=no
-+fi
-+rm -f conftest*
-+ echo "$ac_t""$has_wchar_minmax" 1>&6
-+
-+ echo $ac_n "checking for WEOF""... $ac_c" 1>&6
-+echo "configure:4788: checking for WEOF" >&5
-+ cat > conftest.$ac_ext <<EOF
-+#line 4790 "configure"
-+#include "confdefs.h"
-+
-+ #include <wchar.h>
-+ #include <stddef.h>
-+int main() {
-+wint_t i = WEOF;
-+; return 0; }
-+EOF
-+if { (eval echo configure:4799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+ rm -rf conftest*
-+ has_weof=yes
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ has_weof=no
-+fi
-+rm -f conftest*
-+ echo "$ac_t""$has_weof" 1>&6
-+
-+ ac_wfuncs=yes
-+ for ac_func in wcslen wmemchr wmemcmp wmemcpy wmemmove wmemset
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:4815: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4820 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:4843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+\
-+ ac_wfuncs=no
-+fi
-+done
-+
-+
-+ for ac_func in btowc wctob fgetwc fgetws fputwc fputws fwide \
-+ fwprintf fwscanf swprintf swscanf vfwprintf vfwscanf vswprintf vswscanf \
-+ vwprintf vwscanf wprintf wscanf getwc getwchar mbsinit mbrlen mbrtowc \
-+ mbsrtowcs wcsrtombs putwc putwchar ungetwc wcrtomb wcstod wcstof wcstol \
-+ wcstoul wcscpy wcsncpy wcscat wcsncat wcscmp wcscoll wcsncmp wcsxfrm \
-+ wcscspn wcsspn wcstok wcsftime wcschr wcspbrk wcsrchr wcsstr
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:4878: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4883 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:4906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+
-+else
-+ echo "$ac_t""no" 1>&6
-+\
-+ ac_wfuncs=no
-+fi
-+done
-+
-+
-+ echo $ac_n "checking for ISO C99 wchar_t support""... $ac_c" 1>&6
-+echo "configure:4934: checking for ISO C99 wchar_t support" >&5
-+ if test x"$has_weof" = xyes &&
-+ test x"$has_wchar_minmax" = xyes &&
-+ test x"$ac_wfuncs" = xyes; then
-+ ac_isoC99_wchar_t=yes
-+ else
-+ ac_isoC99_wchar_t=no
-+ fi
-+ echo "$ac_t""$ac_isoC99_wchar_t" 1>&6
-+
-+ ac_safe=`echo "iconv.h" | sed 'y%./+-%__p_%'`
-+echo $ac_n "checking for iconv.h""... $ac_c" 1>&6
-+echo "configure:4946: checking for iconv.h" >&5
-+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4951 "configure"
-+#include "confdefs.h"
-+#include <iconv.h>
-+EOF
-+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-+{ (eval echo configure:4956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-+if test -z "$ac_err"; then
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=yes"
-+else
-+ echo "$ac_err" >&5
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_has_iconv_h=yes
-+else
-+ echo "$ac_t""no" 1>&6
-+ac_has_iconv_h=no
-+fi
-+
-+ ac_safe=`echo "langinfo.h" | sed 'y%./+-%__p_%'`
-+echo $ac_n "checking for langinfo.h""... $ac_c" 1>&6
-+echo "configure:4980: checking for langinfo.h" >&5
-+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 4985 "configure"
-+#include "confdefs.h"
-+#include <langinfo.h>
-+EOF
-+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-+{ (eval echo configure:4990: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-+if test -z "$ac_err"; then
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=yes"
-+else
-+ echo "$ac_err" >&5
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_header_$ac_safe=no"
-+fi
-+rm -f conftest*
-+fi
-+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_has_langinfo_h=yes
-+else
-+ echo "$ac_t""no" 1>&6
-+ac_has_langinfo_h=no
-+fi
-+
-+
-+ echo $ac_n "checking for iconv in -liconv""... $ac_c" 1>&6
-+echo "configure:5014: checking for iconv in -liconv" >&5
-+ac_lib_var=`echo iconv'_'iconv | sed 'y%./+-%__p_%'`
-+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ ac_save_LIBS="$LIBS"
-+LIBS="-liconv $LIBS"
-+cat > conftest.$ac_ext <<EOF
-+#line 5022 "configure"
-+#include "confdefs.h"
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char iconv();
-+
-+int main() {
-+iconv()
-+; return 0; }
-+EOF
-+if { (eval echo configure:5033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_lib_$ac_lib_var=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_lib_$ac_lib_var=no"
-+fi
-+rm -f conftest*
-+LIBS="$ac_save_LIBS"
-+
-+fi
-+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ libiconv="-liconv"
-+else
-+ echo "$ac_t""no" 1>&6
-+fi
-+
-+ ac_save_LIBS="$LIBS"
-+ LIBS="$LIBS $libiconv"
-+
-+ for ac_func in iconv_open iconv_close iconv nl_langinfo
-+do
-+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-+echo "configure:5059: checking for $ac_func" >&5
-+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-+ echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+ cat > conftest.$ac_ext <<EOF
-+#line 5064 "configure"
-+#include "confdefs.h"
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func(); below. */
-+#include <assert.h>
-+/* Override any gcc2 internal prototype to avoid an error. */
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func();
-+
-+int main() {
-+
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+$ac_func();
-+#endif
-+
-+; return 0; }
-+EOF
-+if { (eval echo configure:5087: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=yes"
-+else
-+ echo "configure: failed program was:" >&5
-+ cat conftest.$ac_ext >&5
-+ rm -rf conftest*
-+ eval "ac_cv_func_$ac_func=no"
-+fi
-+rm -f conftest*
-+fi
-+
-+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-+ echo "$ac_t""yes" 1>&6
-+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-+ cat >> confdefs.h <<EOF
-+#define $ac_tr_func 1
-+EOF
-+ \
-+ ac_XPG2funcs=yes
-+else
-+ echo "$ac_t""no" 1>&6
-+ac_XPG2funcs=no
-+fi
-+done
-+
-+
-+ LIBS="$ac_save_LIBS"
-+
-+ echo $ac_n "checking for XPG2 wchar_t support""... $ac_c" 1>&6
-+echo "configure:5117: checking for XPG2 wchar_t support" >&5
-+ if test x"$ac_has_iconv_h" = xyes &&
-+ test x"$ac_has_langinfo_h" = xyes &&
-+ test x"$ac_XPG2funcs" = xyes; then
-+ ac_XPG2_wchar_t=yes
-+ else
-+ ac_XPG2_wchar_t=no
-+ fi
-+ echo "$ac_t""$ac_XPG2_wchar_t" 1>&6
-+
-+ if test x"$ac_isoC99_wchar_t" = xyes &&
-+ test x"$ac_XPG2_wchar_t" = xyes; then
-+ cat >> confdefs.h <<\EOF
-+#define _GLIBCPP_USE_WCHAR_T 1
-+EOF
-+
-+ enable_wchar_t=yes
-+ fi
-+ fi
-+ echo $ac_n "checking for enabled wchar_t specializations""... $ac_c" 1>&6
-+echo "configure:5137: checking for enabled wchar_t specializations" >&5
-+ echo "$ac_t""$enable_wchar_t" 1>&6
-+
-+
-+if test "$enable_wchar_t" = yes; then
-+ GLIBCPP_TEST_WCHAR_T_TRUE=
-+ GLIBCPP_TEST_WCHAR_T_FALSE='#'
-+else
-+ GLIBCPP_TEST_WCHAR_T_TRUE='#'
-+ GLIBCPP_TEST_WCHAR_T_FALSE=
-+fi
-+
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_COPYSIGN 1
-+EOF
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_FINITE 1
-+EOF
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_FINITEF 1
-+EOF
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_ISINF 1
-+EOF
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_ISINFF 1
-+EOF
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_ISNAN 1
-+EOF
-+
-+ cat >> confdefs.h <<\EOF
-+#define HAVE_ISNANF 1
-+EOF
-+ ;;
- *-linux*)
- os_include_dir="os/gnu-linux"
- for ac_hdr in nan.h ieeefp.h endian.h sys/isa_defs.h \
-diff -urN gcc-3.3.3/libstdc++-v3/configure.in gcc-3.3.3-new/libstdc++-v3/configure.in
---- gcc-3.3.3/libstdc++-v3/configure.in 2004-01-12 10:19:22.000000000 -0600
-+++ gcc-3.3.3-new/libstdc++-v3/configure.in 2004-02-16 23:13:45.000000000 -0600
-@@ -117,6 +117,36 @@
- # GLIBCPP_CHECK_MATH_SUPPORT
-
- case "$target" in
-+ *-uclibc*)
-+ os_include_dir="os/uclibc"
-+ AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
-+ machine/endian.h machine/param.h sys/machine.h sys/types.h \
-+ fp.h locale.h float.h inttypes.h])
-+ SECTION_FLAGS='-ffunction-sections -fdata-sections'
-+ AC_SUBST(SECTION_FLAGS)
-+ GLIBCPP_CHECK_LINKER_FEATURES
-+ GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
-+ GLIBCPP_CHECK_WCHAR_T_SUPPORT
-+
-+ AC_DEFINE(HAVE_COPYSIGN)
-+ #AC_DEFINE(HAVE_COPYSIGNF)
-+ AC_DEFINE(HAVE_FINITE)
-+ AC_DEFINE(HAVE_FINITEF)
-+ #AC_DEFINE(HAVE_FREXPF)
-+ #AC_DEFINE(HAVE_HYPOTF)
-+ AC_DEFINE(HAVE_ISINF)
-+ AC_DEFINE(HAVE_ISINFF)
-+ AC_DEFINE(HAVE_ISNAN)
-+ AC_DEFINE(HAVE_ISNANF)
-+ #AC_DEFINE(HAVE_SINCOS)
-+ #AC_DEFINE(HAVE_SINCOSF)
-+ #if test x"long_double_math_on_this_cpu" = x"yes"; then
-+ #AC_DEFINE(HAVE_FINITEL)
-+ #AC_DEFINE(HAVE_HYPOTL)
-+ #AC_DEFINE(HAVE_ISINFL)
-+ #AC_DEFINE(HAVE_ISNANL)
-+ #fi
-+ ;;
- *-linux*)
- os_include_dir="os/gnu-linux"
- AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
-diff -urN gcc-3.3.3/libstdc++-v3/configure.target gcc-3.3.3-new/libstdc++-v3/configure.target
---- gcc-3.3.3/libstdc++-v3/configure.target 2003-10-01 14:07:07.000000000 -0500
-+++ gcc-3.3.3-new/libstdc++-v3/configure.target 2004-02-16 21:12:16.000000000 -0600
-@@ -133,6 +133,9 @@
- freebsd*)
- os_include_dir="os/bsd/freebsd"
- ;;
-+ linux-uclibc*)
-+ os_include_dir="os/uclibc"
-+ ;;
- gnu* | linux*)
- os_include_dir="os/gnu-linux"
- ;;
-diff -urN gcc-3.3.3/libstdc++-v3/include/c_std/std_cstdlib.h gcc-3.3.3-new/libstdc++-v3/include/c_std/std_cstdlib.h
---- gcc-3.3.3/libstdc++-v3/include/c_std/std_cstdlib.h 2003-04-18 05:08:05.000000000 -0500
-+++ gcc-3.3.3-new/libstdc++-v3/include/c_std/std_cstdlib.h 2004-02-16 21:12:16.000000000 -0600
-@@ -101,9 +101,11 @@
- using ::labs;
- using ::ldiv;
- using ::malloc;
-+#if _GLIBCPP_USE_WCHAR_T
- using ::mblen;
- using ::mbstowcs;
- using ::mbtowc;
-+#endif
- using ::qsort;
- using ::rand;
- using ::realloc;
-@@ -112,8 +114,10 @@
- using ::strtol;
- using ::strtoul;
- using ::system;
-+#if _GLIBCPP_USE_WCHAR_T
- using ::wcstombs;
- using ::wctomb;
-+#endif
-
- inline long
- abs(long __i) { return labs(__i); }
-diff -urN gcc-3.3.3/libstdc++-v3/include/c_std/std_cwchar.h gcc-3.3.3-new/libstdc++-v3/include/c_std/std_cwchar.h
---- gcc-3.3.3/libstdc++-v3/include/c_std/std_cwchar.h 2003-04-18 05:08:05.000000000 -0500
-+++ gcc-3.3.3-new/libstdc++-v3/include/c_std/std_cwchar.h 2004-02-16 21:12:16.000000000 -0600
-@@ -165,7 +165,9 @@
- using ::wcscoll;
- using ::wcscpy;
- using ::wcscspn;
-+#ifdef HAVE_WCSFTIME
- using ::wcsftime;
-+#endif
- using ::wcslen;
- using ::wcsncat;
- using ::wcsncmp;
-diff -urN gcc-3.3.3/ltconfig gcc-3.3.3-new/ltconfig
---- gcc-3.3.3/ltconfig 2003-02-19 20:10:02.000000000 -0600
-+++ gcc-3.3.3-new/ltconfig 2004-02-16 21:12:16.000000000 -0600
-@@ -603,6 +603,7 @@
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
- linux-gnu*) ;;
-+linux-uclibc*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-
-@@ -1247,6 +1248,24 @@
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-+linux-uclibc*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ # This implies no fast_install, which is unacceptable.
-+ # Some rework will be needed to allow for fast_install
-+ # before this can be enabled.
-+ # Note: copied from linux-gnu, and may not be appropriate.
-+ hardcode_into_libs=yes
-+ # Assume using the uClibc dynamic linker.
-+ dynamic_linker="uClibc ld.so"
-+ ;;
-+
- netbsd*)
- need_lib_prefix=no
- need_version=no
+++ /dev/null
-Use the patch by Carl Miller <chaz@energoncube.net> for powerpc, with
-some minor modifications. Changed *os_uclibc to *os_linux_uclibc since
-at some point we might support other platforms. Also updated to 3.3.3.
-diff -urN gcc-3.3.3/gcc/config/rs6000/linux.h gcc-3.3.3-new/gcc/config/rs6000/linux.h
---- gcc-3.3.3/gcc/config/rs6000/linux.h 2003-11-14 00:46:10.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/rs6000/linux.h 2004-02-16 21:13:40.000000000 -0600
-@@ -64,7 +64,11 @@
- #define LINK_START_DEFAULT_SPEC "%(link_start_linux)"
-
- #undef LINK_OS_DEFAULT_SPEC
-+#ifdef USE_UCLIBC
-+#define LINK_OS_DEFAULT_SPEC "%(link_os_linux_uclibc)"
-+#else
- #define LINK_OS_DEFAULT_SPEC "%(link_os_linux)"
-+#endif
-
- #undef TARGET_VERSION
- #define TARGET_VERSION fprintf (stderr, " (PowerPC GNU/Linux)");
-diff -urN gcc-3.3.3/gcc/config/rs6000/sysv4.h gcc-3.3.3-new/gcc/config/rs6000/sysv4.h
---- gcc-3.3.3/gcc/config/rs6000/sysv4.h 2003-10-28 13:55:41.000000000 -0600
-+++ gcc-3.3.3-new/gcc/config/rs6000/sysv4.h 2004-02-16 21:13:40.000000000 -0600
-@@ -968,9 +968,11 @@
- %{mcall-linux: %(link_os_linux) } \
- %{mcall-gnu: %(link_os_gnu) } \
- %{mcall-netbsd: %(link_os_netbsd) } \
-+%{mcall-uclibc: %(link_os_linux_uclibc) } \
- %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: \
- %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: \
-- %{!mcall-netbsd: %(link_os_default) }}}}}}}}}"
-+ %{!mcall-netbsd: %{!mcall-uclibc: \
-+ %(link_os_default) }}}}}}}}}}"
-
- #define LINK_OS_DEFAULT_SPEC ""
-
-@@ -1307,6 +1309,12 @@
-
- #define LINK_OS_WINDISS_SPEC ""
-
-+/* uClibc support for Linux. */
-+
-+#define LINK_OS_LINUX_UCLIBC_SPEC "-m elf32ppclinux %{!shared: %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}}}"
-+
- /* Define any extra SPECS that the compiler needs to generate. */
- /* Override rs6000.h definition. */
- #undef SUBTARGET_EXTRA_SPECS
-@@ -1372,6 +1380,7 @@
- { "link_os_netbsd", LINK_OS_NETBSD_SPEC }, \
- { "link_os_vxworks", LINK_OS_VXWORKS_SPEC }, \
- { "link_os_windiss", LINK_OS_WINDISS_SPEC }, \
-+ { "link_os_linux_uclibc", LINK_OS_LINUX_UCLIBC_SPEC }, \
- { "link_os_default", LINK_OS_DEFAULT_SPEC }, \
- { "cc1_endian_big", CC1_ENDIAN_BIG_SPEC }, \
- { "cc1_endian_little", CC1_ENDIAN_LITTLE_SPEC }, \
+++ /dev/null
---- gcc-3.3.2-old/configure.in 2003-08-09 01:57:21.000000000 -0500
-+++ gcc-3.3.2/configure.in 2004-01-15 12:46:29.000000000 -0600
-@@ -1418,6 +1418,11 @@
- fi
-
- FLAGS_FOR_TARGET=
-+case " $targargs " in
-+ *" --nfp "* | *" --without-float "*)
-+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -msoft-float'
-+ ;;
-+esac
- case " $target_configdirs " in
- *" newlib "*)
- case " $targargs " in
+++ /dev/null
-Warning! This patch is not finished. The wide char time-related stuff
-is broken or non-functional. But it serves as a starting point to get
-things building while I continue to work on the uClibc locale internals.
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/c++locale_internal.h gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/c++locale_internal.h
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/c++locale_internal.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/c++locale_internal.h 2004-01-09 07:55:02.000000000 -0600
-@@ -0,0 +1,63 @@
-+// Prototypes for GLIBC thread locale __-prefixed functions -*- C++ -*-
-+
-+// Copyright (C) 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+// Written by Jakub Jelinek <jakub@redhat.com>
-+
-+#include <clocale>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning clean this up
-+#endif
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+
-+extern "C" __typeof(iswctype_l) __iswctype_l;
-+extern "C" __typeof(nl_langinfo_l) __nl_langinfo_l;
-+extern "C" __typeof(strcoll_l) __strcoll_l;
-+extern "C" __typeof(strftime_l) __strftime_l;
-+extern "C" __typeof(strtod_l) __strtod_l;
-+extern "C" __typeof(strtof_l) __strtof_l;
-+extern "C" __typeof(strtold_l) __strtold_l;
-+extern "C" __typeof(strtol_l) __strtol_l;
-+extern "C" __typeof(strtoll_l) __strtoll_l;
-+extern "C" __typeof(strtoul_l) __strtoul_l;
-+extern "C" __typeof(strtoull_l) __strtoull_l;
-+extern "C" __typeof(strxfrm_l) __strxfrm_l;
-+extern "C" __typeof(towlower_l) __towlower_l;
-+extern "C" __typeof(towupper_l) __towupper_l;
-+extern "C" __typeof(wcscoll_l) __wcscoll_l;
-+extern "C" __typeof(wcsftime_l) __wcsftime_l;
-+extern "C" __typeof(wcsxfrm_l) __wcsxfrm_l;
-+extern "C" __typeof(wctype_l) __wctype_l;
-+extern "C" __typeof(newlocale) __newlocale;
-+extern "C" __typeof(freelocale) __freelocale;
-+extern "C" __typeof(duplocale) __duplocale;
-+extern "C" __typeof(uselocale) __uselocale;
-+
-+#endif // GLIBC 2.3 and later
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/c_locale.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/c_locale.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/c_locale.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/c_locale.cc 2004-01-09 08:37:55.000000000 -0600
-@@ -0,0 +1,231 @@
-+// Wrapper for underlying C-language localization -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.8 Standard locale categories.
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <stdexcept>
-+#include <langinfo.h>
-+#include <bits/c++locale_internal.h>
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __strtol_l(S, E, B, L) strtol((S), (E), (B))
-+#define __strtoul_l(S, E, B, L) strtoul((S), (E), (B))
-+#define __strtoll_l(S, E, B, L) strtoll((S), (E), (B))
-+#define __strtoull_l(S, E, B, L) strtoull((S), (E), (B))
-+#define __strtof_l(S, E, L) strtof((S), (E))
-+#define __strtod_l(S, E, L) strtod((S), (E))
-+#define __strtold_l(S, E, L) strtold((S), (E))
-+#endif
-+
-+namespace std
-+{
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, long& __v, ios_base::iostate& __err,
-+ const __c_locale& __cloc, int __base)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ long __l = __strtol_l(__s, &__sanity, __base, __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __l;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, unsigned long& __v,
-+ ios_base::iostate& __err, const __c_locale& __cloc,
-+ int __base)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ unsigned long __ul = __strtoul_l(__s, &__sanity, __base, __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __ul;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+
-+#ifdef _GLIBCPP_USE_LONG_LONG
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, long long& __v, ios_base::iostate& __err,
-+ const __c_locale& __cloc, int __base)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ long long __ll = __strtoll_l(__s, &__sanity, __base, __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __ll;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, unsigned long long& __v,
-+ ios_base::iostate& __err, const __c_locale& __cloc,
-+ int __base)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ unsigned long long __ull = __strtoull_l(__s, &__sanity, __base,
-+ __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __ull;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+#endif
-+
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, float& __v, ios_base::iostate& __err,
-+ const __c_locale& __cloc, int)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ float __f = __strtof_l(__s, &__sanity, __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __f;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, double& __v, ios_base::iostate& __err,
-+ const __c_locale& __cloc, int)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ double __d = __strtod_l(__s, &__sanity, __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __d;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+
-+ template<>
-+ void
-+ __convert_to_v(const char* __s, long double& __v, ios_base::iostate& __err,
-+ const __c_locale& __cloc, int)
-+ {
-+ if (!(__err & ios_base::failbit))
-+ {
-+ char* __sanity;
-+ errno = 0;
-+ long double __ld = __strtold_l(__s, &__sanity, __cloc);
-+ if (__sanity != __s && *__sanity == '\0' && errno != ERANGE)
-+ __v = __ld;
-+ else
-+ __err |= ios_base::failbit;
-+ }
-+ }
-+
-+ void
-+ locale::facet::_S_create_c_locale(__c_locale& __cloc, const char* __s,
-+ __c_locale __old)
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __cloc = __newlocale(1 << LC_ALL, __s, __old);
-+ if (!__cloc)
-+ {
-+ // This named locale is not supported by the underlying OS.
-+ __throw_runtime_error("attempt to create locale from unknown name");
-+ }
-+#else
-+ __cloc = NULL;
-+#endif
-+ }
-+
-+ void
-+ locale::facet::_S_destroy_c_locale(__c_locale& __cloc)
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ if (_S_c_locale != __cloc)
-+ __freelocale(__cloc);
-+#else
-+ __cloc = NULL;
-+#endif
-+ }
-+
-+ __c_locale
-+ locale::facet::_S_clone_c_locale(__c_locale& __cloc)
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ { return __duplocale(__cloc); }
-+#else
-+ { return __c_locale(); }
-+#endif
-+
-+ const char* locale::_S_categories[_S_categories_size
-+ + _S_extra_categories_size] =
-+ {
-+ "LC_CTYPE",
-+ "LC_NUMERIC",
-+ "LC_TIME",
-+ "LC_COLLATE",
-+ "LC_MONETARY",
-+ "LC_MESSAGES"
-+#if _GLIBCPP_NUM_CATEGORIES != 0
-+ ,
-+ "LC_PAPER",
-+ "LC_NAME",
-+ "LC_ADDRESS",
-+ "LC_TELEPHONE",
-+ "LC_MEASUREMENT",
-+ "LC_IDENTIFICATION"
-+#endif
-+ };
-+} // namespace std
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/c_locale.h gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/c_locale.h
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/c_locale.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/c_locale.h 2004-01-09 07:51:06.000000000 -0600
-@@ -0,0 +1,118 @@
-+// Wrapper for underlying C-language localization -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.8 Standard locale categories.
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#ifndef _CPP_BITS_C_LOCALE_H
-+#define _CPP_BITS_C_LOCALE_H 1
-+
-+#pragma GCC system_header
-+
-+#include <clocale>
-+#include <langinfo.h> // For codecvt
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this
-+#endif
-+#ifdef __UCLIBC_HAS_LOCALE__
-+#include <iconv.h> // For codecvt using iconv, iconv_t
-+#endif
-+#ifdef __UCLIBC_HAS_GETTEXT_AWARENESS__
-+#include <libintl.h> // For messages
-+#endif
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning what is _GLIBCPP_C_LOCALE_GNU for
-+#endif
-+#define _GLIBCPP_C_LOCALE_GNU 1
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix categories
-+#endif
-+// #define _GLIBCPP_NUM_CATEGORIES 6
-+#define _GLIBCPP_NUM_CATEGORIES 0
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+namespace __gnu_cxx
-+{
-+ extern "C" __typeof(uselocale) __uselocale;
-+}
-+#endif
-+
-+namespace std
-+{
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ typedef __locale_t __c_locale;
-+#else
-+ typedef int* __c_locale;
-+#endif
-+
-+ // Convert numeric value of type _Tv to string and return length of
-+ // string. If snprintf is available use it, otherwise fall back to
-+ // the unsafe sprintf which, in general, can be dangerous and should
-+ // be avoided.
-+ template<typename _Tv>
-+ int
-+ __convert_from_v(char* __out, const int __size, const char* __fmt,
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ _Tv __v, const __c_locale& __cloc, int __prec = -1)
-+ {
-+ __c_locale __old = __gnu_cxx::__uselocale(__cloc);
-+#else
-+ _Tv __v, const __c_locale&, int __prec = -1)
-+ {
-+# ifdef __UCLIBC_HAS_LOCALE__
-+ char* __old = setlocale(LC_ALL, NULL);
-+ char* __sav = static_cast<char*>(malloc(strlen(__old) + 1));
-+ if (__sav)
-+ strcpy(__sav, __old);
-+ setlocale(LC_ALL, "C");
-+# endif
-+#endif
-+
-+ int __ret;
-+ if (__prec >= 0)
-+ __ret = snprintf(__out, __size, __fmt, __prec, __v);
-+ else
-+ __ret = snprintf(__out, __size, __fmt, __v);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __gnu_cxx::__uselocale(__old);
-+#elif defined __UCLIBC_HAS_LOCALE__
-+ setlocale(LC_ALL, __sav);
-+ free(__sav);
-+#endif
-+ return __ret;
-+ }
-+}
-+
-+#endif
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/codecvt_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/codecvt_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/codecvt_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/codecvt_members.cc 2004-01-09 04:04:34.000000000 -0600
-@@ -0,0 +1,113 @@
-+// std::codecvt implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.1.5 - Template class codecvt
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+namespace std
-+{
-+ // Specializations.
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ codecvt_base::result
-+ codecvt<wchar_t, char, mbstate_t>::
-+ do_out(state_type& __state, const intern_type* __from,
-+ const intern_type* __from_end, const intern_type*& __from_next,
-+ extern_type* __to, extern_type* __to_end,
-+ extern_type*& __to_next) const
-+ {
-+ result __ret = error;
-+ size_t __len = min(__from_end - __from, __to_end - __to);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_S_c_locale);
-+#endif
-+ size_t __conv = wcsrtombs(__to, &__from, __len, &__state);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#endif
-+
-+ if (__conv == __len)
-+ {
-+ __from_next = __from;
-+ __to_next = __to + __conv;
-+ __ret = ok;
-+ }
-+ else if (__conv > 0 && __conv < __len)
-+ {
-+ __from_next = __from;
-+ __to_next = __to + __conv;
-+ __ret = partial;
-+ }
-+ else
-+ __ret = error;
-+
-+ return __ret;
-+ }
-+
-+ codecvt_base::result
-+ codecvt<wchar_t, char, mbstate_t>::
-+ do_in(state_type& __state, const extern_type* __from,
-+ const extern_type* __from_end, const extern_type*& __from_next,
-+ intern_type* __to, intern_type* __to_end,
-+ intern_type*& __to_next) const
-+ {
-+ result __ret = error;
-+ size_t __len = min(__from_end - __from, __to_end - __to);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_S_c_locale);
-+#endif
-+ size_t __conv = mbsrtowcs(__to, &__from, __len, &__state);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#endif
-+
-+ if (__conv == __len)
-+ {
-+ __from_next = __from;
-+ __to_next = __to + __conv;
-+ __ret = ok;
-+ }
-+ else if (__conv > 0 && __conv < __len)
-+ {
-+ __from_next = __from;
-+ __to_next = __to + __conv;
-+ __ret = partial;
-+ }
-+ else
-+ __ret = error;
-+
-+ return __ret;
-+ }
-+#endif
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/codecvt_specializations.h gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/codecvt_specializations.h
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/codecvt_specializations.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/codecvt_specializations.h 2004-01-09 01:53:51.000000000 -0600
-@@ -0,0 +1,461 @@
-+// Locale support (codecvt) -*- C++ -*-
-+
-+// Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.1.5 Template class codecvt
-+//
-+
-+// Warning: this file is not meant for user inclusion. Use <locale>.
-+
-+// Written by Benjamin Kosnik <bkoz@cygnus.com>
-+
-+ // XXX
-+ // Define this here to codecvt.cc can have _S_max_size definition.
-+#define _GLIBCPP_USE___ENC_TRAITS 1
-+
-+ // Extension to use icov for dealing with character encodings,
-+ // including conversions and comparisons between various character
-+ // sets. This object encapsulates data that may need to be shared between
-+ // char_traits, codecvt and ctype.
-+ class __enc_traits
-+ {
-+ public:
-+ // Types:
-+ // NB: A conversion descriptor subsumes and enhances the
-+ // functionality of a simple state type such as mbstate_t.
-+ typedef iconv_t __desc_type;
-+
-+ protected:
-+ // Data Members:
-+ // Max size of charset encoding name
-+ static const int _S_max_size = 32;
-+ // Name of internal character set encoding.
-+ char _M_int_enc[_S_max_size];
-+ // Name of external character set encoding.
-+ char _M_ext_enc[_S_max_size];
-+
-+ // Conversion descriptor between external encoding to internal encoding.
-+ __desc_type _M_in_desc;
-+ // Conversion descriptor between internal encoding to external encoding.
-+ __desc_type _M_out_desc;
-+
-+ // Details the byte-order marker for the external encoding, if necessary.
-+ int _M_ext_bom;
-+
-+ // Details the byte-order marker for the internal encoding, if necessary.
-+ int _M_int_bom;
-+
-+ public:
-+ explicit __enc_traits()
-+ : _M_in_desc(0), _M_out_desc(0), _M_ext_bom(0), _M_int_bom(0)
-+ {
-+ memset(_M_int_enc, 0, _S_max_size);
-+ memset(_M_ext_enc, 0, _S_max_size);
-+ }
-+
-+ explicit __enc_traits(const char* __int, const char* __ext,
-+ int __ibom = 0, int __ebom = 0)
-+ : _M_in_desc(0), _M_out_desc(0), _M_ext_bom(0), _M_int_bom(0)
-+ {
-+ strncpy(_M_int_enc, __int, _S_max_size);
-+ strncpy(_M_ext_enc, __ext, _S_max_size);
-+ }
-+
-+ // 21.1.2 traits typedefs
-+ // p4
-+ // typedef STATE_T state_type
-+ // requires: state_type shall meet the requirements of
-+ // CopyConstructible types (20.1.3)
-+ __enc_traits(const __enc_traits& __obj): _M_in_desc(0), _M_out_desc(0)
-+ {
-+ strncpy(_M_int_enc, __obj._M_int_enc, _S_max_size);
-+ strncpy(_M_ext_enc, __obj._M_ext_enc, _S_max_size);
-+ _M_ext_bom = __obj._M_ext_bom;
-+ _M_int_bom = __obj._M_int_bom;
-+ }
-+
-+ // Need assignment operator as well.
-+ __enc_traits&
-+ operator=(const __enc_traits& __obj)
-+ {
-+ strncpy(_M_int_enc, __obj._M_int_enc, _S_max_size);
-+ strncpy(_M_ext_enc, __obj._M_ext_enc, _S_max_size);
-+ _M_in_desc = 0;
-+ _M_out_desc = 0;
-+ _M_ext_bom = __obj._M_ext_bom;
-+ _M_int_bom = __obj._M_int_bom;
-+ return *this;
-+ }
-+
-+ ~__enc_traits()
-+ {
-+ __desc_type __err = reinterpret_cast<iconv_t>(-1);
-+ if (_M_in_desc && _M_in_desc != __err)
-+ iconv_close(_M_in_desc);
-+ if (_M_out_desc && _M_out_desc != __err)
-+ iconv_close(_M_out_desc);
-+ }
-+
-+ void
-+ _M_init()
-+ {
-+ const __desc_type __err = reinterpret_cast<iconv_t>(-1);
-+ if (!_M_in_desc)
-+ {
-+ _M_in_desc = iconv_open(_M_int_enc, _M_ext_enc);
-+ if (_M_in_desc == __err)
-+ __throw_runtime_error("creating iconv input descriptor failed.");
-+ }
-+ if (!_M_out_desc)
-+ {
-+ _M_out_desc = iconv_open(_M_ext_enc, _M_int_enc);
-+ if (_M_out_desc == __err)
-+ __throw_runtime_error("creating iconv output descriptor failed.");
-+ }
-+ }
-+
-+ bool
-+ _M_good()
-+ {
-+ const __desc_type __err = reinterpret_cast<iconv_t>(-1);
-+ bool __test = _M_in_desc && _M_in_desc != __err;
-+ __test &= _M_out_desc && _M_out_desc != __err;
-+ return __test;
-+ }
-+
-+ const __desc_type*
-+ _M_get_in_descriptor()
-+ { return &_M_in_desc; }
-+
-+ const __desc_type*
-+ _M_get_out_descriptor()
-+ { return &_M_out_desc; }
-+
-+ int
-+ _M_get_external_bom()
-+ { return _M_ext_bom; }
-+
-+ int
-+ _M_get_internal_bom()
-+ { return _M_int_bom; }
-+
-+ const char*
-+ _M_get_internal_enc()
-+ { return _M_int_enc; }
-+
-+ const char*
-+ _M_get_external_enc()
-+ { return _M_ext_enc; }
-+ };
-+
-+ // Partial specialization
-+ // This specialization takes advantage of iconv to provide code
-+ // conversions between a large number of character encodings.
-+ template<typename _InternT, typename _ExternT>
-+ class codecvt<_InternT, _ExternT, __enc_traits>
-+ : public __codecvt_abstract_base<_InternT, _ExternT, __enc_traits>
-+ {
-+ public:
-+ // Types:
-+ typedef codecvt_base::result result;
-+ typedef _InternT intern_type;
-+ typedef _ExternT extern_type;
-+ typedef __enc_traits state_type;
-+ typedef __enc_traits::__desc_type __desc_type;
-+ typedef __enc_traits __enc_type;
-+
-+ // Data Members:
-+ static locale::id id;
-+
-+ explicit
-+ codecvt(size_t __refs = 0)
-+ : __codecvt_abstract_base<intern_type, extern_type, state_type>(__refs)
-+ { }
-+
-+ explicit
-+ codecvt(__enc_type* __enc, size_t __refs = 0)
-+ : __codecvt_abstract_base<intern_type, extern_type, state_type>(__refs)
-+ { }
-+
-+ protected:
-+ virtual
-+ ~codecvt() { }
-+
-+ virtual result
-+ do_out(state_type& __state, const intern_type* __from,
-+ const intern_type* __from_end, const intern_type*& __from_next,
-+ extern_type* __to, extern_type* __to_end,
-+ extern_type*& __to_next) const;
-+
-+ virtual result
-+ do_unshift(state_type& __state, extern_type* __to,
-+ extern_type* __to_end, extern_type*& __to_next) const;
-+
-+ virtual result
-+ do_in(state_type& __state, const extern_type* __from,
-+ const extern_type* __from_end, const extern_type*& __from_next,
-+ intern_type* __to, intern_type* __to_end,
-+ intern_type*& __to_next) const;
-+
-+ virtual int
-+ do_encoding() const throw();
-+
-+ virtual bool
-+ do_always_noconv() const throw();
-+
-+ virtual int
-+ do_length(const state_type&, const extern_type* __from,
-+ const extern_type* __end, size_t __max) const;
-+
-+ virtual int
-+ do_max_length() const throw();
-+ };
-+
-+ template<typename _InternT, typename _ExternT>
-+ locale::id
-+ codecvt<_InternT, _ExternT, __enc_traits>::id;
-+
-+ // This adaptor works around the signature problems of the second
-+ // argument to iconv(): SUSv2 and others use 'const char**', but glibc 2.2
-+ // uses 'char**', which matches the POSIX 1003.1-2001 standard.
-+ // Using this adaptor, g++ will do the work for us.
-+ template<typename _T>
-+ inline size_t
-+ __iconv_adaptor(size_t(*__func)(iconv_t, _T, size_t*, char**, size_t*),
-+ iconv_t __cd, char** __inbuf, size_t* __inbytes,
-+ char** __outbuf, size_t* __outbytes)
-+ { return __func(__cd, (_T)__inbuf, __inbytes, __outbuf, __outbytes); }
-+
-+ template<typename _InternT, typename _ExternT>
-+ codecvt_base::result
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_out(state_type& __state, const intern_type* __from,
-+ const intern_type* __from_end, const intern_type*& __from_next,
-+ extern_type* __to, extern_type* __to_end,
-+ extern_type*& __to_next) const
-+ {
-+ result __ret = codecvt_base::error;
-+ if (__state._M_good())
-+ {
-+ typedef state_type::__desc_type __desc_type;
-+ const __desc_type* __desc = __state._M_get_out_descriptor();
-+ const size_t __fmultiple = sizeof(intern_type);
-+ size_t __fbytes = __fmultiple * (__from_end - __from);
-+ const size_t __tmultiple = sizeof(extern_type);
-+ size_t __tbytes = __tmultiple * (__to_end - __to);
-+
-+ // Argument list for iconv specifies a byte sequence. Thus,
-+ // all to/from arrays must be brutally casted to char*.
-+ char* __cto = reinterpret_cast<char*>(__to);
-+ char* __cfrom;
-+ size_t __conv;
-+
-+ // Some encodings need a byte order marker as the first item
-+ // in the byte stream, to designate endian-ness. The default
-+ // value for the byte order marker is NULL, so if this is
-+ // the case, it's not necessary and we can just go on our
-+ // merry way.
-+ int __int_bom = __state._M_get_internal_bom();
-+ if (__int_bom)
-+ {
-+ size_t __size = __from_end - __from;
-+ intern_type* __cfixed = static_cast<intern_type*>(__builtin_alloca(sizeof(intern_type) * (__size + 1)));
-+ __cfixed[0] = static_cast<intern_type>(__int_bom);
-+ char_traits<intern_type>::copy(__cfixed + 1, __from, __size);
-+ __cfrom = reinterpret_cast<char*>(__cfixed);
-+ __conv = __iconv_adaptor(iconv, *__desc, &__cfrom,
-+ &__fbytes, &__cto, &__tbytes);
-+ }
-+ else
-+ {
-+ intern_type* __cfixed = const_cast<intern_type*>(__from);
-+ __cfrom = reinterpret_cast<char*>(__cfixed);
-+ __conv = __iconv_adaptor(iconv, *__desc, &__cfrom, &__fbytes,
-+ &__cto, &__tbytes);
-+ }
-+
-+ if (__conv != size_t(-1))
-+ {
-+ __from_next = reinterpret_cast<const intern_type*>(__cfrom);
-+ __to_next = reinterpret_cast<extern_type*>(__cto);
-+ __ret = codecvt_base::ok;
-+ }
-+ else
-+ {
-+ if (__fbytes < __fmultiple * (__from_end - __from))
-+ {
-+ __from_next = reinterpret_cast<const intern_type*>(__cfrom);
-+ __to_next = reinterpret_cast<extern_type*>(__cto);
-+ __ret = codecvt_base::partial;
-+ }
-+ else
-+ __ret = codecvt_base::error;
-+ }
-+ }
-+ return __ret;
-+ }
-+
-+ template<typename _InternT, typename _ExternT>
-+ codecvt_base::result
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_unshift(state_type& __state, extern_type* __to,
-+ extern_type* __to_end, extern_type*& __to_next) const
-+ {
-+ result __ret = codecvt_base::error;
-+ if (__state._M_good())
-+ {
-+ typedef state_type::__desc_type __desc_type;
-+ const __desc_type* __desc = __state._M_get_in_descriptor();
-+ const size_t __tmultiple = sizeof(intern_type);
-+ size_t __tlen = __tmultiple * (__to_end - __to);
-+
-+ // Argument list for iconv specifies a byte sequence. Thus,
-+ // all to/from arrays must be brutally casted to char*.
-+ char* __cto = reinterpret_cast<char*>(__to);
-+ size_t __conv = __iconv_adaptor(iconv,*__desc, NULL, NULL,
-+ &__cto, &__tlen);
-+
-+ if (__conv != size_t(-1))
-+ {
-+ __to_next = reinterpret_cast<extern_type*>(__cto);
-+ if (__tlen == __tmultiple * (__to_end - __to))
-+ __ret = codecvt_base::noconv;
-+ else if (__tlen == 0)
-+ __ret = codecvt_base::ok;
-+ else
-+ __ret = codecvt_base::partial;
-+ }
-+ else
-+ __ret = codecvt_base::error;
-+ }
-+ return __ret;
-+ }
-+
-+ template<typename _InternT, typename _ExternT>
-+ codecvt_base::result
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_in(state_type& __state, const extern_type* __from,
-+ const extern_type* __from_end, const extern_type*& __from_next,
-+ intern_type* __to, intern_type* __to_end,
-+ intern_type*& __to_next) const
-+ {
-+ result __ret = codecvt_base::error;
-+ if (__state._M_good())
-+ {
-+ typedef state_type::__desc_type __desc_type;
-+ const __desc_type* __desc = __state._M_get_in_descriptor();
-+ const size_t __fmultiple = sizeof(extern_type);
-+ size_t __flen = __fmultiple * (__from_end - __from);
-+ const size_t __tmultiple = sizeof(intern_type);
-+ size_t __tlen = __tmultiple * (__to_end - __to);
-+
-+ // Argument list for iconv specifies a byte sequence. Thus,
-+ // all to/from arrays must be brutally casted to char*.
-+ char* __cto = reinterpret_cast<char*>(__to);
-+ char* __cfrom;
-+ size_t __conv;
-+
-+ // Some encodings need a byte order marker as the first item
-+ // in the byte stream, to designate endian-ness. The default
-+ // value for the byte order marker is NULL, so if this is
-+ // the case, it's not necessary and we can just go on our
-+ // merry way.
-+ int __ext_bom = __state._M_get_external_bom();
-+ if (__ext_bom)
-+ {
-+ size_t __size = __from_end - __from;
-+ extern_type* __cfixed = static_cast<extern_type*>(__builtin_alloca(sizeof(extern_type) * (__size + 1)));
-+ __cfixed[0] = static_cast<extern_type>(__ext_bom);
-+ char_traits<extern_type>::copy(__cfixed + 1, __from, __size);
-+ __cfrom = reinterpret_cast<char*>(__cfixed);
-+ __conv = __iconv_adaptor(iconv, *__desc, &__cfrom,
-+ &__flen, &__cto, &__tlen);
-+ }
-+ else
-+ {
-+ extern_type* __cfixed = const_cast<extern_type*>(__from);
-+ __cfrom = reinterpret_cast<char*>(__cfixed);
-+ __conv = __iconv_adaptor(iconv, *__desc, &__cfrom,
-+ &__flen, &__cto, &__tlen);
-+ }
-+
-+
-+ if (__conv != size_t(-1))
-+ {
-+ __from_next = reinterpret_cast<const extern_type*>(__cfrom);
-+ __to_next = reinterpret_cast<intern_type*>(__cto);
-+ __ret = codecvt_base::ok;
-+ }
-+ else
-+ {
-+ if (__flen < static_cast<size_t>(__from_end - __from))
-+ {
-+ __from_next = reinterpret_cast<const extern_type*>(__cfrom);
-+ __to_next = reinterpret_cast<intern_type*>(__cto);
-+ __ret = codecvt_base::partial;
-+ }
-+ else
-+ __ret = codecvt_base::error;
-+ }
-+ }
-+ return __ret;
-+ }
-+
-+ template<typename _InternT, typename _ExternT>
-+ int
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_encoding() const throw()
-+ {
-+ int __ret = 0;
-+ if (sizeof(_ExternT) <= sizeof(_InternT))
-+ __ret = sizeof(_InternT)/sizeof(_ExternT);
-+ return __ret;
-+ }
-+
-+ template<typename _InternT, typename _ExternT>
-+ bool
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_always_noconv() const throw()
-+ { return false; }
-+
-+ template<typename _InternT, typename _ExternT>
-+ int
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_length(const state_type&, const extern_type* __from,
-+ const extern_type* __end, size_t __max) const
-+ { return min(__max, static_cast<size_t>(__end - __from)); }
-+
-+#ifdef _GLIBCPP_RESOLVE_LIB_DEFECTS
-+// 74. Garbled text for codecvt::do_max_length
-+ template<typename _InternT, typename _ExternT>
-+ int
-+ codecvt<_InternT, _ExternT, __enc_traits>::
-+ do_max_length() const throw()
-+ { return 1; }
-+#endif
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/collate_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/collate_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/collate_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/collate_members.cc 2004-01-09 08:06:24.000000000 -0600
-@@ -0,0 +1,80 @@
-+// std::collate implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.4.1.2 collate virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __strcoll_l(S1, S2, L) strcoll((S1), (S2))
-+#define __strxfrm_l(S1, S2, N, L) strxfrm((S1), (S2), (N))
-+#define __wcscoll_l(S1, S2, L) wcscoll((S1), (S2))
-+#define __wcsxfrm_l(S1, S2, N, L) wcsxfrm((S1), (S2), (N))
-+#endif
-+
-+namespace std
-+{
-+ // These are basically extensions to char_traits, and perhaps should
-+ // be put there instead of here.
-+ template<>
-+ int
-+ collate<char>::_M_compare(const char* __one, const char* __two) const
-+ {
-+ int __cmp = __strcoll_l(__one, __two, _M_c_locale_collate);
-+ return (__cmp >> (8 * sizeof (int) - 2)) | (__cmp != 0);
-+ }
-+
-+ template<>
-+ size_t
-+ collate<char>::_M_transform(char* __to, const char* __from,
-+ size_t __n) const
-+ { return __strxfrm_l(__to, __from, __n, _M_c_locale_collate); }
-+
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ template<>
-+ int
-+ collate<wchar_t>::_M_compare(const wchar_t* __one,
-+ const wchar_t* __two) const
-+ {
-+ int __cmp = __wcscoll_l(__one, __two, _M_c_locale_collate);
-+ return (__cmp >> (8 * sizeof (int) - 2)) | (__cmp != 0);
-+ }
-+
-+ template<>
-+ size_t
-+ collate<wchar_t>::_M_transform(wchar_t* __to, const wchar_t* __from,
-+ size_t __n) const
-+ { return __wcsxfrm_l(__to, __from, __n, _M_c_locale_collate); }
-+#endif
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/ctype_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/ctype_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/ctype_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/ctype_members.cc 2004-01-09 08:15:41.000000000 -0600
-@@ -0,0 +1,274 @@
-+// std::ctype implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.1.1.2 ctype virtual functions.
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#define _LIBC
-+#include <locale>
-+#undef _LIBC
-+#include <bits/c++locale_internal.h>
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __wctype_l(S, L) wctype((S))
-+#define __towupper_l(C, L) towupper((C))
-+#define __towlower_l(C, L) towlower((C))
-+#define __iswctype_l(C, M, L) iswctype((C), (M))
-+#endif
-+
-+namespace std
-+{
-+ // NB: The other ctype<char> specializations are in src/locale.cc and
-+ // various /config/os/* files.
-+ template<>
-+ ctype_byname<char>::ctype_byname(const char* __s, size_t __refs)
-+ : ctype<char>(0, false, __refs)
-+ {
-+ _S_destroy_c_locale(_M_c_locale_ctype);
-+ _S_create_c_locale(_M_c_locale_ctype, __s);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ _M_toupper = _M_c_locale_ctype->__ctype_toupper;
-+ _M_tolower = _M_c_locale_ctype->__ctype_tolower;
-+ _M_table = _M_c_locale_ctype->__ctype_b;
-+#endif
-+ }
-+
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ ctype<wchar_t>::__wmask_type
-+ ctype<wchar_t>::_M_convert_to_wmask(const mask __m) const
-+ {
-+ __wmask_type __ret;
-+ switch (__m)
-+ {
-+ case space:
-+ __ret = __wctype_l("space", _M_c_locale_ctype);
-+ break;
-+ case print:
-+ __ret = __wctype_l("print", _M_c_locale_ctype);
-+ break;
-+ case cntrl:
-+ __ret = __wctype_l("cntrl", _M_c_locale_ctype);
-+ break;
-+ case upper:
-+ __ret = __wctype_l("upper", _M_c_locale_ctype);
-+ break;
-+ case lower:
-+ __ret = __wctype_l("lower", _M_c_locale_ctype);
-+ break;
-+ case alpha:
-+ __ret = __wctype_l("alpha", _M_c_locale_ctype);
-+ break;
-+ case digit:
-+ __ret = __wctype_l("digit", _M_c_locale_ctype);
-+ break;
-+ case punct:
-+ __ret = __wctype_l("punct", _M_c_locale_ctype);
-+ break;
-+ case xdigit:
-+ __ret = __wctype_l("xdigit", _M_c_locale_ctype);
-+ break;
-+ case alnum:
-+ __ret = __wctype_l("alnum", _M_c_locale_ctype);
-+ break;
-+ case graph:
-+ __ret = __wctype_l("graph", _M_c_locale_ctype);
-+ break;
-+ default:
-+ __ret = 0;
-+ }
-+ return __ret;
-+ };
-+
-+ wchar_t
-+ ctype<wchar_t>::do_toupper(wchar_t __c) const
-+ { return __towupper_l(__c, _M_c_locale_ctype); }
-+
-+ const wchar_t*
-+ ctype<wchar_t>::do_toupper(wchar_t* __lo, const wchar_t* __hi) const
-+ {
-+ while (__lo < __hi)
-+ {
-+ *__lo = __towupper_l(*__lo, _M_c_locale_ctype);
-+ ++__lo;
-+ }
-+ return __hi;
-+ }
-+
-+ wchar_t
-+ ctype<wchar_t>::do_tolower(wchar_t __c) const
-+ { return __towlower_l(__c, _M_c_locale_ctype); }
-+
-+ const wchar_t*
-+ ctype<wchar_t>::do_tolower(wchar_t* __lo, const wchar_t* __hi) const
-+ {
-+ while (__lo < __hi)
-+ {
-+ *__lo = __towlower_l(*__lo, _M_c_locale_ctype);
-+ ++__lo;
-+ }
-+ return __hi;
-+ }
-+
-+ bool
-+ ctype<wchar_t>::
-+ do_is(mask __m, wchar_t __c) const
-+ {
-+ // Highest bitmask in ctype_base == 10, but extra in "C"
-+ // library for blank.
-+ bool __ret = false;
-+ const size_t __bitmasksize = 11;
-+ for (size_t __bitcur = 0; __bitcur <= __bitmasksize; ++__bitcur)
-+ {
-+ const mask __bit = static_cast<mask>(_ISbit(__bitcur));
-+ if (__m & __bit)
-+ __ret |= __iswctype_l(__c, _M_convert_to_wmask(__bit),
-+ _M_c_locale_ctype);
-+ }
-+ return __ret;
-+ }
-+
-+ const wchar_t*
-+ ctype<wchar_t>::
-+ do_is(const wchar_t* __lo, const wchar_t* __hi, mask* __vec) const
-+ {
-+ for (;__lo < __hi; ++__vec, ++__lo)
-+ {
-+ // Highest bitmask in ctype_base == 10, but extra in "C"
-+ // library for blank.
-+ const size_t __bitmasksize = 11;
-+ mask __m = 0;
-+ for (size_t __bitcur = 0; __bitcur <= __bitmasksize; ++__bitcur)
-+ {
-+ const mask __bit = static_cast<mask>(_ISbit(__bitcur));
-+ if (__iswctype_l(*__lo, _M_convert_to_wmask(__bit),
-+ _M_c_locale_ctype))
-+ __m |= __bit;
-+ }
-+ *__vec = __m;
-+ }
-+ return __hi;
-+ }
-+
-+ const wchar_t*
-+ ctype<wchar_t>::
-+ do_scan_is(mask __m, const wchar_t* __lo, const wchar_t* __hi) const
-+ {
-+ while (__lo < __hi && !this->do_is(__m, *__lo))
-+ ++__lo;
-+ return __lo;
-+ }
-+
-+ const wchar_t*
-+ ctype<wchar_t>::
-+ do_scan_not(mask __m, const char_type* __lo, const char_type* __hi) const
-+ {
-+ while (__lo < __hi && this->do_is(__m, *__lo) != 0)
-+ ++__lo;
-+ return __lo;
-+ }
-+
-+ wchar_t
-+ ctype<wchar_t>::
-+ do_widen(char __c) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+ wchar_t __ret = btowc(__c);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#endif
-+ return __ret;
-+ }
-+
-+ const char*
-+ ctype<wchar_t>::
-+ do_widen(const char* __lo, const char* __hi, wchar_t* __dest) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+ mbstate_t __state;
-+ memset(static_cast<void*>(&__state), 0, sizeof(mbstate_t));
-+ mbsrtowcs(__dest, &__lo, __hi - __lo, &__state);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#endif
-+ return __hi;
-+ }
-+
-+ char
-+ ctype<wchar_t>::
-+ do_narrow(wchar_t __wc, char __dfault) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+ int __c = wctob(__wc);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#endif
-+ return (__c == EOF ? __dfault : static_cast<char>(__c));
-+ }
-+
-+ const wchar_t*
-+ ctype<wchar_t>::
-+ do_narrow(const wchar_t* __lo, const wchar_t* __hi, char __dfault,
-+ char* __dest) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+ size_t __offset = 0;
-+ while (true)
-+ {
-+ const wchar_t* __start = __lo + __offset;
-+ size_t __len = __hi - __start;
-+
-+ mbstate_t __state;
-+ memset(static_cast<void*>(&__state), 0, sizeof(mbstate_t));
-+ size_t __con = wcsrtombs(__dest + __offset, &__start, __len, &__state);
-+ if (__con != __len && __start != 0)
-+ {
-+ __offset = __start - __lo;
-+ __dest[__offset++] = __dfault;
-+ }
-+ else
-+ break;
-+ }
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#endif
-+ return __hi;
-+ }
-+#endif // _GLIBCPP_USE_WCHAR_T
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/messages_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/messages_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/messages_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/messages_members.cc 2004-01-09 08:46:16.000000000 -0600
-@@ -0,0 +1,100 @@
-+// std::messages implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.7.1.2 messages virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix gettext stuff
-+#endif
-+#ifdef __UCLIBC_HAS_GETTEXT_AWARENESS__
-+extern "C" char *__dcgettext(const char *domainname,
-+ const char *msgid, int category);
-+#undef gettext
-+#define gettext(msgid) __dcgettext(NULL, msgid, LC_MESSAGES)
-+#else
-+#undef gettext
-+#define gettext(msgid) (msgid)
-+#endif
-+
-+namespace std
-+{
-+ // Specializations.
-+ template<>
-+ string
-+ messages<char>::do_get(catalog, int, int, const string& __dfault) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_M_c_locale_messages);
-+ const char* __msg = const_cast<const char*>(gettext(__dfault.c_str()));
-+ __uselocale(__old);
-+ return string(__msg);
-+#elif defined __UCLIBC_HAS_LOCALE__
-+ char* __old = strdup(setlocale(LC_ALL, NULL));
-+ setlocale(LC_ALL, _M_name_messages);
-+ const char* __msg = gettext(__dfault.c_str());
-+ setlocale(LC_ALL, __old);
-+ free(__old);
-+ return string(__msg);
-+#else
-+ const char* __msg = gettext(__dfault.c_str());
-+ return string(__msg);
-+#endif
-+ }
-+
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ template<>
-+ wstring
-+ messages<wchar_t>::do_get(catalog, int, int, const wstring& __dfault) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(_M_c_locale_messages);
-+ char* __msg = gettext(_M_convert_to_char(__dfault));
-+ __uselocale(__old);
-+ return _M_convert_from_char(__msg);
-+#elif defined __UCLIBC_HAS_LOCALE__
-+ char* __old = strdup(setlocale(LC_ALL, NULL));
-+ setlocale(LC_ALL, _M_name_messages);
-+ char* __msg = gettext(_M_convert_to_char(__dfault));
-+ setlocale(LC_ALL, __old);
-+ free(__old);
-+ return _M_convert_from_char(__msg);
-+# else
-+ char* __msg = gettext(_M_convert_to_char(__dfault));
-+ return _M_convert_from_char(__msg);
-+# endif
-+ }
-+#endif
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/messages_members.h gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/messages_members.h
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/messages_members.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/messages_members.h 2004-01-09 08:52:48.000000000 -0600
-@@ -0,0 +1,122 @@
-+// std::messages implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.7.1.2 messages functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix prototypes for *textdomain funcs
-+#endif
-+#ifdef __UCLIBC_HAS_GETTEXT_AWARENESS__
-+extern "C" char *__textdomain(const char *domainname);
-+extern "C" char *__bindtextdomain(const char *domainname,
-+ const char *dirname);
-+#else
-+#undef __textdomain
-+#undef __bindtextdomain
-+#define __textdomain(D) ((void)0)
-+#define __bindtextdomain(D,P) ((void)0)
-+#endif
-+
-+ // Non-virtual member functions.
-+ template<typename _CharT>
-+ messages<_CharT>::messages(size_t __refs)
-+ : locale::facet(__refs)
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ _M_name_messages = _S_c_name;
-+#endif
-+ _M_c_locale_messages = _S_c_locale;
-+ }
-+
-+ template<typename _CharT>
-+ messages<_CharT>::messages(__c_locale __cloc,
-+ const char* __s, size_t __refs)
-+ : locale::facet(__refs)
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ _M_name_messages = new char[strlen(__s) + 1];
-+ strcpy(_M_name_messages, __s);
-+#endif
-+ _M_c_locale_messages = _S_clone_c_locale(__cloc);
-+ }
-+
-+ template<typename _CharT>
-+ typename messages<_CharT>::catalog
-+ messages<_CharT>::open(const basic_string<char>& __s, const locale& __loc,
-+ const char* __dir) const
-+ {
-+ __bindtextdomain(__s.c_str(), __dir);
-+ return this->do_open(__s, __loc);
-+ }
-+
-+ // Virtual member functions.
-+ template<typename _CharT>
-+ messages<_CharT>::~messages()
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ if (_S_c_name != _M_name_messages)
-+ delete [] _M_name_messages;
-+#endif
-+ _S_destroy_c_locale(_M_c_locale_messages);
-+ }
-+
-+ template<typename _CharT>
-+ typename messages<_CharT>::catalog
-+ messages<_CharT>::do_open(const basic_string<char>& __s,
-+ const locale&) const
-+ {
-+ // No error checking is done, assume the catalog exists and can
-+ // be used.
-+ __textdomain(__s.c_str());
-+ return 0;
-+ }
-+
-+ template<typename _CharT>
-+ void
-+ messages<_CharT>::do_close(catalog) const
-+ { }
-+
-+ // messages_byname
-+ template<typename _CharT>
-+ messages_byname<_CharT>::messages_byname(const char* __s, size_t __refs)
-+ : messages<_CharT>(__refs)
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ if (_S_c_name != _M_name_messages)
-+ delete [] _M_name_messages;
-+ _M_name_messages = new char[strlen(__s) + 1];
-+ strcpy(_M_name_messages, __s);
-+#endif
-+ _S_destroy_c_locale(_M_c_locale_messages);
-+ _S_create_c_locale(_M_c_locale_messages, __s);
-+ }
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/monetary_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/monetary_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/monetary_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/monetary_members.cc 2004-01-09 18:20:23.000000000 -0600
-@@ -0,0 +1,578 @@
-+// std::moneypunct implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.6.3.2 moneypunct virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#define _LIBC
-+#include <locale>
-+#undef _LIBC
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning optimize this for uclibc
-+#warning tailor for stub locale support
-+#endif
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __nl_langinfo_l(N, L) nl_langinfo((N))
-+#endif
-+
-+namespace std
-+{
-+ // Construct and return valid pattern consisting of some combination of:
-+ // space none symbol sign value
-+ money_base::pattern
-+ money_base::_S_construct_pattern(char __precedes, char __space, char __posn)
-+ {
-+ pattern __ret;
-+
-+ // This insanely complicated routine attempts to construct a valid
-+ // pattern for use with monyepunct. A couple of invariants:
-+
-+ // if (__precedes) symbol -> value
-+ // else value -> symbol
-+
-+ // if (__space) space
-+ // else none
-+
-+ // none == never first
-+ // space never first or last
-+
-+ // Any elegant implementations of this are welcome.
-+ switch (__posn)
-+ {
-+ case 0:
-+ case 1:
-+ // 1 The sign precedes the value and symbol.
-+ if (__space)
-+ {
-+ // Pattern starts with sign.
-+ if (__precedes)
-+ {
-+ __ret.field[1] = symbol;
-+ __ret.field[2] = space;
-+ __ret.field[3] = value;
-+ }
-+ else
-+ {
-+ __ret.field[1] = value;
-+ __ret.field[2] = space;
-+ __ret.field[3] = symbol;
-+ }
-+ __ret.field[0] = sign;
-+ }
-+ else
-+ {
-+ // Pattern starts with sign and ends with none.
-+ if (__precedes)
-+ {
-+ __ret.field[1] = symbol;
-+ __ret.field[2] = value;
-+ }
-+ else
-+ {
-+ __ret.field[1] = value;
-+ __ret.field[2] = symbol;
-+ }
-+ __ret.field[0] = sign;
-+ __ret.field[3] = none;
-+ }
-+ break;
-+ case 2:
-+ // 2 The sign follows the value and symbol.
-+ if (__space)
-+ {
-+ // Pattern either ends with sign.
-+ if (__precedes)
-+ {
-+ __ret.field[0] = symbol;
-+ __ret.field[1] = space;
-+ __ret.field[2] = value;
-+ }
-+ else
-+ {
-+ __ret.field[0] = value;
-+ __ret.field[1] = space;
-+ __ret.field[2] = symbol;
-+ }
-+ __ret.field[3] = sign;
-+ }
-+ else
-+ {
-+ // Pattern ends with sign then none.
-+ if (__precedes)
-+ {
-+ __ret.field[0] = symbol;
-+ __ret.field[1] = value;
-+ }
-+ else
-+ {
-+ __ret.field[0] = value;
-+ __ret.field[1] = symbol;
-+ }
-+ __ret.field[2] = sign;
-+ __ret.field[3] = none;
-+ }
-+ break;
-+ case 3:
-+ // 3 The sign immediately precedes the symbol.
-+ if (__space)
-+ {
-+ // Have space.
-+ if (__precedes)
-+ {
-+ __ret.field[0] = sign;
-+ __ret.field[1] = symbol;
-+ __ret.field[2] = space;
-+ __ret.field[3] = value;
-+ }
-+ else
-+ {
-+ __ret.field[0] = value;
-+ __ret.field[1] = space;
-+ __ret.field[2] = sign;
-+ __ret.field[3] = symbol;
-+ }
-+ }
-+ else
-+ {
-+ // Have none.
-+ if (__precedes)
-+ {
-+ __ret.field[0] = sign;
-+ __ret.field[1] = symbol;
-+ __ret.field[2] = value;
-+ }
-+ else
-+ {
-+ __ret.field[0] = value;
-+ __ret.field[1] = sign;
-+ __ret.field[2] = symbol;
-+ }
-+ __ret.field[3] = none;
-+ }
-+ break;
-+ case 4:
-+ // 4 The sign immediately follows the symbol.
-+ if (__space)
-+ {
-+ // Have space.
-+ if (__precedes)
-+ {
-+ __ret.field[0] = symbol;
-+ __ret.field[1] = sign;
-+ __ret.field[2] = space;
-+ __ret.field[3] = value;
-+ }
-+ else
-+ {
-+ __ret.field[0] = value;
-+ __ret.field[1] = space;
-+ __ret.field[2] = symbol;
-+ __ret.field[3] = sign;
-+ }
-+ }
-+ else
-+ {
-+ // Have none.
-+ if (__precedes)
-+ {
-+ __ret.field[0] = symbol;
-+ __ret.field[1] = sign;
-+ __ret.field[2] = value;
-+ }
-+ else
-+ {
-+ __ret.field[0] = value;
-+ __ret.field[1] = symbol;
-+ __ret.field[2] = sign;
-+ }
-+ __ret.field[3] = none;
-+ }
-+ break;
-+ default:
-+ ;
-+ }
-+ return __ret;
-+ }
-+
-+ template<>
-+ void
-+ moneypunct<char, true>::_M_initialize_moneypunct(__c_locale __cloc,
-+ const char*)
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_decimal_point = '.';
-+ _M_thousands_sep = ',';
-+ _M_grouping = "";
-+ _M_curr_symbol = "";
-+ _M_positive_sign = "";
-+ _M_negative_sign = "";
-+ _M_frac_digits = 0;
-+ _M_pos_format = money_base::_S_default_pattern;
-+ _M_neg_format = money_base::_S_default_pattern;
-+ }
-+ else
-+ {
-+ // Named locale.
-+ _M_decimal_point = *(__nl_langinfo_l(__MON_DECIMAL_POINT, __cloc));
-+ _M_thousands_sep = *(__nl_langinfo_l(__MON_THOUSANDS_SEP, __cloc));
-+ _M_grouping = __nl_langinfo_l(__MON_GROUPING, __cloc);
-+ _M_positive_sign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+
-+ char __nposn = *(__nl_langinfo_l(__INT_N_SIGN_POSN, __cloc));
-+ if (!__nposn)
-+ _M_negative_sign = "()";
-+ else
-+ _M_negative_sign = __nl_langinfo_l(__NEGATIVE_SIGN, __cloc);
-+
-+ // _Intl == true
-+ _M_curr_symbol = __nl_langinfo_l(__INT_CURR_SYMBOL, __cloc);
-+ _M_frac_digits = *(__nl_langinfo_l(__INT_FRAC_DIGITS, __cloc));
-+ char __pprecedes = *(__nl_langinfo_l(__INT_P_CS_PRECEDES, __cloc));
-+ char __pspace = *(__nl_langinfo_l(__INT_P_SEP_BY_SPACE, __cloc));
-+ char __pposn = *(__nl_langinfo_l(__INT_P_SIGN_POSN, __cloc));
-+ _M_pos_format = _S_construct_pattern(__pprecedes, __pspace, __pposn);
-+ char __nprecedes = *(__nl_langinfo_l(__INT_N_CS_PRECEDES, __cloc));
-+ char __nspace = *(__nl_langinfo_l(__INT_N_SEP_BY_SPACE, __cloc));
-+ _M_neg_format = _S_construct_pattern(__nprecedes, __nspace, __nposn);
-+ }
-+ }
-+
-+ template<>
-+ void
-+ moneypunct<char, false>::_M_initialize_moneypunct(__c_locale __cloc,
-+ const char*)
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_decimal_point = '.';
-+ _M_thousands_sep = ',';
-+ _M_grouping = "";
-+ _M_curr_symbol = "";
-+ _M_positive_sign = "";
-+ _M_negative_sign = "";
-+ _M_frac_digits = 0;
-+ _M_pos_format = money_base::_S_default_pattern;
-+ _M_neg_format = money_base::_S_default_pattern;
-+ }
-+ else
-+ {
-+ // Named locale.
-+ _M_decimal_point = *(__nl_langinfo_l(__MON_DECIMAL_POINT, __cloc));
-+ _M_thousands_sep = *(__nl_langinfo_l(__MON_THOUSANDS_SEP, __cloc));
-+ _M_grouping = __nl_langinfo_l(__MON_GROUPING, __cloc);
-+ _M_positive_sign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+
-+ char __nposn = *(__nl_langinfo_l(__N_SIGN_POSN, __cloc));
-+ if (!__nposn)
-+ _M_negative_sign = "()";
-+ else
-+ _M_negative_sign = __nl_langinfo_l(__NEGATIVE_SIGN, __cloc);
-+
-+ // _Intl == false
-+ _M_curr_symbol = __nl_langinfo_l(__CURRENCY_SYMBOL, __cloc);
-+ _M_frac_digits = *(__nl_langinfo_l(__FRAC_DIGITS, __cloc));
-+ char __pprecedes = *(__nl_langinfo_l(__P_CS_PRECEDES, __cloc));
-+ char __pspace = *(__nl_langinfo_l(__P_SEP_BY_SPACE, __cloc));
-+ char __pposn = *(__nl_langinfo_l(__P_SIGN_POSN, __cloc));
-+ _M_pos_format = _S_construct_pattern(__pprecedes, __pspace, __pposn);
-+ char __nprecedes = *(__nl_langinfo_l(__N_CS_PRECEDES, __cloc));
-+ char __nspace = *(__nl_langinfo_l(__N_SEP_BY_SPACE, __cloc));
-+ _M_neg_format = _S_construct_pattern(__nprecedes, __nspace, __nposn);
-+ }
-+ }
-+
-+ template<>
-+ moneypunct<char, true>::~moneypunct()
-+ { }
-+
-+ template<>
-+ moneypunct<char, false>::~moneypunct()
-+ { }
-+
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ template<>
-+ void
-+ moneypunct<wchar_t, true>::_M_initialize_moneypunct(__c_locale __cloc,
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ const char*)
-+#else
-+ const char* __name)
-+#endif
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_decimal_point = L'.';
-+ _M_thousands_sep = L',';
-+ _M_grouping = "";
-+ _M_curr_symbol = L"";
-+ _M_positive_sign = L"";
-+ _M_negative_sign = L"";
-+ _M_frac_digits = 0;
-+ _M_pos_format = money_base::_S_default_pattern;
-+ _M_neg_format = money_base::_S_default_pattern;
-+ }
-+ else
-+ {
-+ // Named locale.
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(__cloc);
-+#else
-+ // Switch to named locale so that mbsrtowcs will work.
-+ char* __old = strdup(setlocale(LC_ALL, NULL));
-+ setlocale(LC_ALL, __name);
-+#endif
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this
-+#endif
-+#ifdef __UCLIBC__
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+ _M_decimal_point = __cloc->decimal_point_wc;
-+ _M_thousands_sep = __cloc->thousands_sep_wc;
-+# else
-+ _M_decimal_point = __global_locale->decimal_point_wc;
-+ _M_thousands_sep = __global_locale->thousands_sep_wc;
-+# endif
-+#else
-+ _M_decimal_point = static_cast<wchar_t>(((union { const char *__s; unsigned int __w; }){ __s: __nl_langinfo_l(_NL_NUMERIC_DECIMAL_POINT_WC, __cloc)}).__w);
-+
-+ _M_thousands_sep = static_cast<wchar_t>(((union { const char *__s; unsigned int __w; }){ __s: __nl_langinfo_l(_NL_NUMERIC_THOUSANDS_SEP_WC, __cloc)}).__w);
-+#endif
-+ _M_grouping = __nl_langinfo_l(GROUPING, __cloc);
-+
-+ const char* __cpossign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+ const char* __cnegsign = __nl_langinfo_l(__NEGATIVE_SIGN, __cloc);
-+ const char* __ccurr = __nl_langinfo_l(__INT_CURR_SYMBOL, __cloc);
-+
-+ mbstate_t __state;
-+ size_t __len = strlen(__cpossign);
-+ if (__len)
-+ {
-+ ++__len;
-+ memset(&__state, 0, sizeof(mbstate_t));
-+ wchar_t* __wcs = new wchar_t[__len];
-+ mbsrtowcs(__wcs, &__cpossign, __len, &__state);
-+ _M_positive_sign = __wcs;
-+ }
-+ else
-+ _M_positive_sign = L"";
-+
-+ char __nposn = *(__nl_langinfo_l(__INT_N_SIGN_POSN, __cloc));
-+ __len = strlen(__cnegsign);
-+ if (!__nposn)
-+ _M_negative_sign = L"()";
-+ else if (__len)
-+ {
-+ ++__len;
-+ memset(&__state, 0, sizeof(mbstate_t));
-+ wchar_t* __wcs = new wchar_t[__len];
-+ mbsrtowcs(__wcs, &__cnegsign, __len, &__state);
-+ _M_negative_sign = __wcs;
-+ }
-+ else
-+ _M_negative_sign = L"";
-+
-+ // _Intl == true.
-+ __len = strlen(__ccurr);
-+ if (__len)
-+ {
-+ ++__len;
-+ memset(&__state, 0, sizeof(mbstate_t));
-+ wchar_t* __wcs = new wchar_t[__len];
-+ mbsrtowcs(__wcs, &__ccurr, __len, &__state);
-+ _M_curr_symbol = __wcs;
-+ }
-+ else
-+ _M_curr_symbol = L"";
-+
-+ _M_frac_digits = *(__nl_langinfo_l(__INT_FRAC_DIGITS, __cloc));
-+ char __pprecedes = *(__nl_langinfo_l(__INT_P_CS_PRECEDES, __cloc));
-+ char __pspace = *(__nl_langinfo_l(__INT_P_SEP_BY_SPACE, __cloc));
-+ char __pposn = *(__nl_langinfo_l(__INT_P_SIGN_POSN, __cloc));
-+ _M_pos_format = _S_construct_pattern(__pprecedes, __pspace, __pposn);
-+ char __nprecedes = *(__nl_langinfo_l(__INT_N_CS_PRECEDES, __cloc));
-+ char __nspace = *(__nl_langinfo_l(__INT_N_SEP_BY_SPACE, __cloc));
-+ _M_neg_format = _S_construct_pattern(__nprecedes, __nspace, __nposn);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#else
-+ setlocale(LC_ALL, __old);
-+ free(__old);
-+#endif
-+ }
-+ }
-+
-+ template<>
-+ void
-+ moneypunct<wchar_t, false>::_M_initialize_moneypunct(__c_locale __cloc,
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ const char*)
-+#else
-+ const char* __name)
-+#endif
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_decimal_point = L'.';
-+ _M_thousands_sep = L',';
-+ _M_grouping = "";
-+ _M_curr_symbol = L"";
-+ _M_positive_sign = L"";
-+ _M_negative_sign = L"";
-+ _M_frac_digits = 0;
-+ _M_pos_format = money_base::_S_default_pattern;
-+ _M_neg_format = money_base::_S_default_pattern;
-+ }
-+ else
-+ {
-+ // Named locale.
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __c_locale __old = __uselocale(__cloc);
-+#else
-+ // Switch to named locale so that mbsrtowcs will work.
-+ char* __old = strdup(setlocale(LC_ALL, NULL));
-+ setlocale(LC_ALL, __name);
-+#endif
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this
-+#endif
-+#ifdef __UCLIBC__
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+ _M_decimal_point = __cloc->decimal_point_wc;
-+ _M_thousands_sep = __cloc->thousands_sep_wc;
-+# else
-+ _M_decimal_point = __global_locale->decimal_point_wc;
-+ _M_thousands_sep = __global_locale->thousands_sep_wc;
-+# endif
-+#else
-+ _M_decimal_point = static_cast<wchar_t>(((union { const char *__s; unsigned int __w; }){ __s: __nl_langinfo_l(_NL_NUMERIC_DECIMAL_POINT_WC, __cloc)}).__w);
-+ _M_thousands_sep = static_cast<wchar_t>(((union { const char *__s; unsigned int __w; }){ __s: __nl_langinfo_l(_NL_NUMERIC_THOUSANDS_SEP_WC, __cloc)}).__w);
-+#endif
-+ _M_grouping = __nl_langinfo_l(GROUPING, __cloc);
-+
-+ const char* __cpossign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+ const char* __cnegsign = __nl_langinfo_l(__NEGATIVE_SIGN, __cloc);
-+ const char* __ccurr = __nl_langinfo_l(__CURRENCY_SYMBOL, __cloc);
-+
-+ mbstate_t __state;
-+ size_t __len;
-+ __len = strlen(__cpossign);
-+ if (__len)
-+ {
-+ ++__len;
-+ memset(&__state, 0, sizeof(mbstate_t));
-+ wchar_t* __wcs = new wchar_t[__len];
-+ mbsrtowcs(__wcs, &__cpossign, __len, &__state);
-+ _M_positive_sign = __wcs;
-+ }
-+ else
-+ _M_positive_sign = L"";
-+
-+ char __nposn = *(__nl_langinfo_l(__N_SIGN_POSN, __cloc));
-+ __len = strlen(__cnegsign);
-+ if (!__nposn)
-+ _M_negative_sign = L"()";
-+ else if (__len)
-+ {
-+ ++__len;
-+ memset(&__state, 0, sizeof(mbstate_t));
-+ wchar_t* __wcs = new wchar_t[__len];
-+ mbsrtowcs(__wcs, &__cnegsign, __len, &__state);
-+ _M_negative_sign = __wcs;
-+ }
-+ else
-+ _M_negative_sign = L"";
-+
-+ // _Intl == true.
-+ __len = strlen(__ccurr);
-+ if (__len)
-+ {
-+ ++__len;
-+ memset(&__state, 0, sizeof(mbstate_t));
-+ wchar_t* __wcs = new wchar_t[__len];
-+ mbsrtowcs(__wcs, &__ccurr, __len, &__state);
-+ _M_curr_symbol = __wcs;
-+ }
-+ else
-+ _M_curr_symbol = L"";
-+
-+ _M_frac_digits = *(__nl_langinfo_l(__FRAC_DIGITS, __cloc));
-+ char __pprecedes = *(__nl_langinfo_l(__P_CS_PRECEDES, __cloc));
-+ char __pspace = *(__nl_langinfo_l(__P_SEP_BY_SPACE, __cloc));
-+ char __pposn = *(__nl_langinfo_l(__P_SIGN_POSN, __cloc));
-+ _M_pos_format = _S_construct_pattern(__pprecedes, __pspace, __pposn);
-+ char __nprecedes = *(__nl_langinfo_l(__N_CS_PRECEDES, __cloc));
-+ char __nspace = *(__nl_langinfo_l(__N_SEP_BY_SPACE, __cloc));
-+ _M_neg_format = _S_construct_pattern(__nprecedes, __nspace, __nposn);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __uselocale(__old);
-+#else
-+ setlocale(LC_ALL, __old);
-+ free(__old);
-+#endif
-+ }
-+ }
-+
-+ template<>
-+ moneypunct<wchar_t, true>::~moneypunct()
-+ {
-+ if (wcslen(_M_positive_sign))
-+ delete [] _M_positive_sign;
-+ if (wcslen(_M_negative_sign) && (wcscmp(_M_negative_sign, L"()") != 0))
-+ delete [] _M_negative_sign;
-+ if (wcslen(_M_curr_symbol))
-+ delete [] _M_curr_symbol;
-+ }
-+
-+ template<>
-+ moneypunct<wchar_t, false>::~moneypunct()
-+ {
-+ if (wcslen(_M_positive_sign))
-+ delete [] _M_positive_sign;
-+ if (wcslen(_M_negative_sign) && (wcscmp(_M_negative_sign, L"()") != 0))
-+ delete [] _M_negative_sign;
-+ if (wcslen(_M_curr_symbol))
-+ delete [] _M_curr_symbol;
-+ }
-+#endif
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/numeric_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/numeric_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/numeric_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/numeric_members.cc 2004-01-09 18:20:59.000000000 -0600
-@@ -0,0 +1,129 @@
-+// std::numpunct implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.3.1.2 numpunct virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#define _LIBC
-+#include <locale>
-+#undef _LIBC
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning tailor for stub locale support
-+#endif
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __nl_langinfo_l(N, L) nl_langinfo((N))
-+#endif
-+
-+namespace std
-+{
-+ template<>
-+ void
-+ numpunct<char>::_M_initialize_numpunct(__c_locale __cloc)
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_decimal_point = '.';
-+ _M_thousands_sep = ',';
-+ _M_grouping = "";
-+ }
-+ else
-+ {
-+ // Named locale.
-+ _M_decimal_point = *(__nl_langinfo_l(RADIXCHAR, __cloc));
-+ _M_thousands_sep = *(__nl_langinfo_l(THOUSEP, __cloc));
-+ // Check for NUL, which implies no grouping.
-+ if (_M_thousands_sep == '\0')
-+ _M_grouping = "";
-+ else
-+ _M_grouping = __nl_langinfo_l(GROUPING, __cloc);
-+ }
-+ // NB: There is no way to extact this info from posix locales.
-+ // _M_truename = __nl_langinfo_l(YESSTR, __cloc);
-+ _M_truename = "true";
-+ // _M_falsename = __nl_langinfo_l(NOSTR, __cloc);
-+ _M_falsename = "false";
-+ }
-+
-+ template<>
-+ numpunct<char>::~numpunct()
-+ { }
-+
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ template<>
-+ void
-+ numpunct<wchar_t>::_M_initialize_numpunct(__c_locale __cloc)
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_decimal_point = L'.';
-+ _M_thousands_sep = L',';
-+ _M_grouping = "";
-+ }
-+ else
-+ {
-+ // Named locale.
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this
-+#endif
-+#ifdef __UCLIBC__
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+ _M_decimal_point = __cloc->decimal_point_wc;
-+ _M_thousands_sep = __cloc->thousands_sep_wc;
-+# else
-+ _M_decimal_point = __global_locale->decimal_point_wc;
-+ _M_thousands_sep = __global_locale->thousands_sep_wc;
-+# endif
-+#else
-+ _M_decimal_point = static_cast<wchar_t>(((union { const char *__s; unsigned int __w; }){ __s: __nl_langinfo_l(_NL_NUMERIC_DECIMAL_POINT_WC, __cloc)}).__w);
-+ _M_thousands_sep = static_cast<wchar_t>(((union { const char *__s; unsigned int __w; }){ __s: __nl_langinfo_l(_NL_NUMERIC_THOUSANDS_SEP_WC, __cloc)}).__w);
-+#endif
-+ if (_M_thousands_sep == L'\0')
-+ _M_grouping = "";
-+ else
-+ _M_grouping = __nl_langinfo_l(GROUPING, __cloc);
-+ }
-+ // NB: There is no way to extact this info from posix locales.
-+ // _M_truename = __nl_langinfo_l(YESSTR, __cloc);
-+ _M_truename = L"true";
-+ // _M_falsename = __nl_langinfo_l(NOSTR, __cloc);
-+ _M_falsename = L"false";
-+ }
-+
-+ template<>
-+ numpunct<wchar_t>::~numpunct()
-+ { }
-+ #endif
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/time_members.cc gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/time_members.cc
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/time_members.cc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/time_members.cc 2004-01-09 08:25:03.000000000 -0600
-@@ -0,0 +1,341 @@
-+// std::time_get, std::time_put implementation, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.5.1.2 - time_get virtual functions
-+// ISO C++ 14882: 22.2.5.3.2 - time_put virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning tailor for stub locale support
-+#endif
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __nl_langinfo_l(N, L) nl_langinfo((N))
-+#endif
-+
-+namespace std
-+{
-+ template<>
-+ void
-+ __timepunct<char>::
-+ _M_put(char* __s, size_t __maxlen, const char* __format,
-+ const tm* __tm) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __strftime_l(__s, __maxlen, __format, __tm, _M_c_locale_timepunct);
-+#else
-+ char* __old = strdup(setlocale(LC_ALL, NULL));
-+ setlocale(LC_ALL, _M_name_timepunct);
-+ strftime(__s, __maxlen, __format, __tm);
-+ setlocale(LC_ALL, __old);
-+ free(__old);
-+#endif
-+ }
-+
-+ template<>
-+ void
-+ __timepunct<char>::_M_initialize_timepunct(__c_locale __cloc)
-+ {
-+ if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_c_locale_timepunct = _S_c_locale;
-+
-+ _M_date_format = "%m/%d/%y";
-+ _M_date_era_format = "%m/%d/%y";
-+ _M_time_format = "%H:%M:%S";
-+ _M_time_era_format = "%H:%M:%S";
-+ _M_date_time_format = "";
-+ _M_date_time_era_format = "";
-+ _M_am = "AM";
-+ _M_pm = "PM";
-+ _M_am_pm_format = "";
-+
-+ // Day names, starting with "C"'s Sunday.
-+ _M_day1 = "Sunday";
-+ _M_day2 = "Monday";
-+ _M_day3 = "Tuesday";
-+ _M_day4 = "Wednesday";
-+ _M_day5 = "Thursday";
-+ _M_day6 = "Friday";
-+ _M_day7 = "Saturday";
-+
-+ // Abbreviated day names, starting with "C"'s Sun.
-+ _M_day_a1 = "Sun";
-+ _M_day_a2 = "Mon";
-+ _M_day_a3 = "Tue";
-+ _M_day_a4 = "Wed";
-+ _M_day_a5 = "Thu";
-+ _M_day_a6 = "Fri";
-+ _M_day_a7 = "Sat";
-+
-+ // Month names, starting with "C"'s January.
-+ _M_month01 = "January";
-+ _M_month02 = "February";
-+ _M_month03 = "March";
-+ _M_month04 = "April";
-+ _M_month05 = "May";
-+ _M_month06 = "June";
-+ _M_month07 = "July";
-+ _M_month08 = "August";
-+ _M_month09 = "September";
-+ _M_month10 = "October";
-+ _M_month11 = "November";
-+ _M_month12 = "December";
-+
-+ // Abbreviated month names, starting with "C"'s Jan.
-+ _M_month_a01 = "Jan";
-+ _M_month_a02 = "Feb";
-+ _M_month_a03 = "Mar";
-+ _M_month_a04 = "Apr";
-+ _M_month_a05 = "May";
-+ _M_month_a06 = "Jun";
-+ _M_month_a07 = "July";
-+ _M_month_a08 = "Aug";
-+ _M_month_a09 = "Sep";
-+ _M_month_a10 = "Oct";
-+ _M_month_a11 = "Nov";
-+ _M_month_a12 = "Dec";
-+ }
-+ else
-+ {
-+ _M_c_locale_timepunct = _S_clone_c_locale(__cloc);
-+
-+ _M_date_format = __nl_langinfo_l(D_FMT, __cloc);
-+ _M_date_era_format = __nl_langinfo_l(ERA_D_FMT, __cloc);
-+ _M_time_format = __nl_langinfo_l(T_FMT, __cloc);
-+ _M_time_era_format = __nl_langinfo_l(ERA_T_FMT, __cloc);
-+ _M_date_time_format = __nl_langinfo_l(D_T_FMT, __cloc);
-+ _M_date_time_era_format = __nl_langinfo_l(ERA_D_T_FMT, __cloc);
-+ _M_am = __nl_langinfo_l(AM_STR, __cloc);
-+ _M_pm = __nl_langinfo_l(PM_STR, __cloc);
-+ _M_am_pm_format = __nl_langinfo_l(T_FMT_AMPM, __cloc);
-+
-+ // Day names, starting with "C"'s Sunday.
-+ _M_day1 = __nl_langinfo_l(DAY_1, __cloc);
-+ _M_day2 = __nl_langinfo_l(DAY_2, __cloc);
-+ _M_day3 = __nl_langinfo_l(DAY_3, __cloc);
-+ _M_day4 = __nl_langinfo_l(DAY_4, __cloc);
-+ _M_day5 = __nl_langinfo_l(DAY_5, __cloc);
-+ _M_day6 = __nl_langinfo_l(DAY_6, __cloc);
-+ _M_day7 = __nl_langinfo_l(DAY_7, __cloc);
-+
-+ // Abbreviated day names, starting with "C"'s Sun.
-+ _M_day_a1 = __nl_langinfo_l(ABDAY_1, __cloc);
-+ _M_day_a2 = __nl_langinfo_l(ABDAY_2, __cloc);
-+ _M_day_a3 = __nl_langinfo_l(ABDAY_3, __cloc);
-+ _M_day_a4 = __nl_langinfo_l(ABDAY_4, __cloc);
-+ _M_day_a5 = __nl_langinfo_l(ABDAY_5, __cloc);
-+ _M_day_a6 = __nl_langinfo_l(ABDAY_6, __cloc);
-+ _M_day_a7 = __nl_langinfo_l(ABDAY_7, __cloc);
-+
-+ // Month names, starting with "C"'s January.
-+ _M_month01 = __nl_langinfo_l(MON_1, __cloc);
-+ _M_month02 = __nl_langinfo_l(MON_2, __cloc);
-+ _M_month03 = __nl_langinfo_l(MON_3, __cloc);
-+ _M_month04 = __nl_langinfo_l(MON_4, __cloc);
-+ _M_month05 = __nl_langinfo_l(MON_5, __cloc);
-+ _M_month06 = __nl_langinfo_l(MON_6, __cloc);
-+ _M_month07 = __nl_langinfo_l(MON_7, __cloc);
-+ _M_month08 = __nl_langinfo_l(MON_8, __cloc);
-+ _M_month09 = __nl_langinfo_l(MON_9, __cloc);
-+ _M_month10 = __nl_langinfo_l(MON_10, __cloc);
-+ _M_month11 = __nl_langinfo_l(MON_11, __cloc);
-+ _M_month12 = __nl_langinfo_l(MON_12, __cloc);
-+
-+ // Abbreviated month names, starting with "C"'s Jan.
-+ _M_month_a01 = __nl_langinfo_l(ABMON_1, __cloc);
-+ _M_month_a02 = __nl_langinfo_l(ABMON_2, __cloc);
-+ _M_month_a03 = __nl_langinfo_l(ABMON_3, __cloc);
-+ _M_month_a04 = __nl_langinfo_l(ABMON_4, __cloc);
-+ _M_month_a05 = __nl_langinfo_l(ABMON_5, __cloc);
-+ _M_month_a06 = __nl_langinfo_l(ABMON_6, __cloc);
-+ _M_month_a07 = __nl_langinfo_l(ABMON_7, __cloc);
-+ _M_month_a08 = __nl_langinfo_l(ABMON_8, __cloc);
-+ _M_month_a09 = __nl_langinfo_l(ABMON_9, __cloc);
-+ _M_month_a10 = __nl_langinfo_l(ABMON_10, __cloc);
-+ _M_month_a11 = __nl_langinfo_l(ABMON_11, __cloc);
-+ _M_month_a12 = __nl_langinfo_l(ABMON_12, __cloc);
-+ }
-+ }
-+
-+#ifdef _GLIBCPP_USE_WCHAR_T
-+ template<>
-+ void
-+ __timepunct<wchar_t>::
-+ _M_put(wchar_t* __s, size_t __maxlen, const wchar_t* __format,
-+ const tm* __tm) const
-+ {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+ __wcsftime_l(__s, __maxlen, __format, __tm, _M_c_locale_timepunct);
-+#else
-+ char* __old = strdup(setlocale(LC_ALL, NULL));
-+ setlocale(LC_ALL, _M_name_timepunct);
-+ wcsftime(__s, __maxlen, __format, __tm);
-+ setlocale(LC_ALL, __old);
-+ free(__old);
-+#endif
-+ }
-+
-+ template<>
-+ void
-+ __timepunct<wchar_t>::_M_initialize_timepunct(__c_locale __cloc)
-+ {
-+#warning wide time stuff
-+// if (!__cloc)
-+ {
-+ // "C" locale
-+ _M_c_locale_timepunct = _S_c_locale;
-+
-+ _M_date_format = L"%m/%d/%y";
-+ _M_date_era_format = L"%m/%d/%y";
-+ _M_time_format = L"%H:%M:%S";
-+ _M_time_era_format = L"%H:%M:%S";
-+ _M_date_time_format = L"";
-+ _M_date_time_era_format = L"";
-+ _M_am = L"AM";
-+ _M_pm = L"PM";
-+ _M_am_pm_format = L"";
-+
-+ // Day names, starting with "C"'s Sunday.
-+ _M_day1 = L"Sunday";
-+ _M_day2 = L"Monday";
-+ _M_day3 = L"Tuesday";
-+ _M_day4 = L"Wednesday";
-+ _M_day5 = L"Thursday";
-+ _M_day6 = L"Friday";
-+ _M_day7 = L"Saturday";
-+
-+ // Abbreviated day names, starting with "C"'s Sun.
-+ _M_day_a1 = L"Sun";
-+ _M_day_a2 = L"Mon";
-+ _M_day_a3 = L"Tue";
-+ _M_day_a4 = L"Wed";
-+ _M_day_a5 = L"Thu";
-+ _M_day_a6 = L"Fri";
-+ _M_day_a7 = L"Sat";
-+
-+ // Month names, starting with "C"'s January.
-+ _M_month01 = L"January";
-+ _M_month02 = L"February";
-+ _M_month03 = L"March";
-+ _M_month04 = L"April";
-+ _M_month05 = L"May";
-+ _M_month06 = L"June";
-+ _M_month07 = L"July";
-+ _M_month08 = L"August";
-+ _M_month09 = L"September";
-+ _M_month10 = L"October";
-+ _M_month11 = L"November";
-+ _M_month12 = L"December";
-+
-+ // Abbreviated month names, starting with "C"'s Jan.
-+ _M_month_a01 = L"Jan";
-+ _M_month_a02 = L"Feb";
-+ _M_month_a03 = L"Mar";
-+ _M_month_a04 = L"Apr";
-+ _M_month_a05 = L"May";
-+ _M_month_a06 = L"Jun";
-+ _M_month_a07 = L"July";
-+ _M_month_a08 = L"Aug";
-+ _M_month_a09 = L"Sep";
-+ _M_month_a10 = L"Oct";
-+ _M_month_a11 = L"Nov";
-+ _M_month_a12 = L"Dec";
-+ }
-+#if 0
-+ else
-+ {
-+ _M_c_locale_timepunct = _S_clone_c_locale(__cloc);
-+
-+ _M_date_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WD_FMT, __cloc));
-+ _M_date_era_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WERA_D_FMT, __cloc));
-+ _M_time_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WT_FMT, __cloc));
-+ _M_time_era_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WERA_T_FMT, __cloc));
-+ _M_date_time_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WD_T_FMT, __cloc));
-+ _M_date_time_era_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WERA_D_T_FMT, __cloc));
-+ _M_am = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WAM_STR, __cloc));
-+ _M_pm = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WPM_STR, __cloc));
-+ _M_am_pm_format = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WT_FMT_AMPM, __cloc));
-+
-+ // Day names, starting with "C"'s Sunday.
-+ _M_day1 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_1, __cloc));
-+ _M_day2 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_2, __cloc));
-+ _M_day3 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_3, __cloc));
-+ _M_day4 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_4, __cloc));
-+ _M_day5 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_5, __cloc));
-+ _M_day6 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_6, __cloc));
-+ _M_day7 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WDAY_7, __cloc));
-+
-+ // Abbreviated day names, starting with "C"'s Sun.
-+ _M_day_a1 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_1, __cloc));
-+ _M_day_a2 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_2, __cloc));
-+ _M_day_a3 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_3, __cloc));
-+ _M_day_a4 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_4, __cloc));
-+ _M_day_a5 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_5, __cloc));
-+ _M_day_a6 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_6, __cloc));
-+ _M_day_a7 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABDAY_7, __cloc));
-+
-+ // Month names, starting with "C"'s January.
-+ _M_month01 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_1, __cloc));
-+ _M_month02 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_2, __cloc));
-+ _M_month03 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_3, __cloc));
-+ _M_month04 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_4, __cloc));
-+ _M_month05 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_5, __cloc));
-+ _M_month06 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_6, __cloc));
-+ _M_month07 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_7, __cloc));
-+ _M_month08 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_8, __cloc));
-+ _M_month09 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_9, __cloc));
-+ _M_month10 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_10, __cloc));
-+ _M_month11 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_11, __cloc));
-+ _M_month12 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WMON_12, __cloc));
-+
-+ // Abbreviated month names, starting with "C"'s Jan.
-+ _M_month_a01 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_1, __cloc));
-+ _M_month_a02 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_2, __cloc));
-+ _M_month_a03 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_3, __cloc));
-+ _M_month_a04 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_4, __cloc));
-+ _M_month_a05 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_5, __cloc));
-+ _M_month_a06 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_6, __cloc));
-+ _M_month_a07 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_7, __cloc));
-+ _M_month_a08 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_8, __cloc));
-+ _M_month_a09 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_9, __cloc));
-+ _M_month_a10 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_10, __cloc));
-+ _M_month_a11 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_11, __cloc));
-+ _M_month_a12 = reinterpret_cast<wchar_t*>(__nl_langinfo_l(_NL_WABMON_12, __cloc));
-+ }
-+#endif // 0
-+ }
-+#endif
-+}
-diff -urN gcc-3.3.2/libstdc++-v3/config/locale/uclibc/time_members.h gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/time_members.h
---- gcc-3.3.2/libstdc++-v3/config/locale/uclibc/time_members.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/locale/uclibc/time_members.h 2004-01-09 04:26:21.000000000 -0600
-@@ -0,0 +1,68 @@
-+// std::time_get, std::time_put implementation, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.5.1.2 - time_get functions
-+// ISO C++ 14882: 22.2.5.3.2 - time_put functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+ template<typename _CharT>
-+ __timepunct<_CharT>::__timepunct(size_t __refs)
-+ : locale::facet(__refs)
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ _M_name_timepunct = _S_c_name;
-+#endif
-+ _M_initialize_timepunct();
-+ }
-+
-+ template<typename _CharT>
-+ __timepunct<_CharT>::__timepunct(__c_locale __cloc,
-+ const char* __s,
-+ size_t __refs)
-+ : locale::facet(__refs)
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ _M_name_timepunct = new char[strlen(__s) + 1];
-+ strcpy(_M_name_timepunct, __s);
-+#endif
-+ _M_initialize_timepunct(__cloc);
-+ }
-+
-+ template<typename _CharT>
-+ __timepunct<_CharT>::~__timepunct()
-+ {
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+ if (_S_c_name != _M_name_timepunct)
-+ delete [] _M_name_timepunct;
-+#endif
-+ _S_destroy_c_locale(_M_c_locale_timepunct);
-+ }
-diff -urN gcc-3.3.2/libstdc++-v3/config/os/uclibc/ctype_base.h gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/ctype_base.h
---- gcc-3.3.2/libstdc++-v3/config/os/uclibc/ctype_base.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/ctype_base.h 2004-01-09 02:54:54.000000000 -0600
-@@ -0,0 +1,57 @@
-+// Locale support -*- C++ -*-
-+
-+// Copyright (C) 1997, 1998, 1999, 2000, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.1 Locales
-+//
-+
-+// Information as gleaned from /usr/include/ctype.h
-+
-+ struct ctype_base
-+ {
-+ // Note: In uClibc, the following two types depend on configuration.
-+
-+ // Non-standard typedefs.
-+ typedef const __ctype_touplow_t* __to_type;
-+ // NB: Offsets into ctype<char>::_M_table force a particular size
-+ // on the mask type. Because of this, we don't use an enum.
-+ typedef __ctype_mask_t mask;
-+
-+ static const mask upper = _ISupper;
-+ static const mask lower = _ISlower;
-+ static const mask alpha = _ISalpha;
-+ static const mask digit = _ISdigit;
-+ static const mask xdigit = _ISxdigit;
-+ static const mask space = _ISspace;
-+ static const mask print = _ISprint;
-+ static const mask graph = _ISgraph;
-+ static const mask cntrl = _IScntrl;
-+ static const mask punct = _ISpunct;
-+ static const mask alnum = _ISalnum;
-+ };
-diff -urN gcc-3.3.2/libstdc++-v3/config/os/uclibc/ctype_inline.h gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/ctype_inline.h
---- gcc-3.3.2/libstdc++-v3/config/os/uclibc/ctype_inline.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/ctype_inline.h 2002-06-24 00:49:19.000000000 -0500
-@@ -0,0 +1,69 @@
-+// Locale support -*- C++ -*-
-+
-+// Copyright (C) 2000, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.1 Locales
-+//
-+
-+// ctype bits to be inlined go here. Non-inlinable (ie virtual do_*)
-+// functions go in ctype.cc
-+
-+ bool
-+ ctype<char>::
-+ is(mask __m, char __c) const
-+ { return _M_table[static_cast<unsigned char>(__c)] & __m; }
-+
-+ const char*
-+ ctype<char>::
-+ is(const char* __low, const char* __high, mask* __vec) const
-+ {
-+ while (__low < __high)
-+ *__vec++ = _M_table[static_cast<unsigned char>(*__low++)];
-+ return __high;
-+ }
-+
-+ const char*
-+ ctype<char>::
-+ scan_is(mask __m, const char* __low, const char* __high) const
-+ {
-+ while (__low < __high
-+ && !(_M_table[static_cast<unsigned char>(*__low)] & __m))
-+ ++__low;
-+ return __low;
-+ }
-+
-+ const char*
-+ ctype<char>::
-+ scan_not(mask __m, const char* __low, const char* __high) const
-+ {
-+ while (__low < __high
-+ && (_M_table[static_cast<unsigned char>(*__low)] & __m) != 0)
-+ ++__low;
-+ return __low;
-+ }
-diff -urN gcc-3.3.2/libstdc++-v3/config/os/uclibc/ctype_noninline.h gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/ctype_noninline.h
---- gcc-3.3.2/libstdc++-v3/config/os/uclibc/ctype_noninline.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/ctype_noninline.h 2004-01-09 03:34:53.000000000 -0600
-@@ -0,0 +1,90 @@
-+// Locale support -*- C++ -*-
-+
-+// Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002
-+// Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.1 Locales
-+//
-+
-+// Information as gleaned from /usr/include/ctype.h
-+
-+ const ctype_base::mask*
-+ ctype<char>::classic_table() throw()
-+ {
-+ return __C_ctype_b;
-+ }
-+
-+ ctype<char>::ctype(__c_locale, const mask* __table, bool __del,
-+ size_t __refs)
-+ : __ctype_abstract_base<char>(__refs), _M_del(__table != 0 && __del)
-+ {
-+ _M_toupper = __C_ctype_toupper;
-+ _M_tolower = __C_ctype_tolower;
-+ _M_table = __table ? __table : __C_ctype_b;
-+ _M_c_locale_ctype = _S_c_locale;
-+ }
-+
-+ ctype<char>::ctype(const mask* __table, bool __del, size_t __refs) :
-+ __ctype_abstract_base<char>(__refs), _M_del(__table != 0 && __del)
-+ {
-+ _M_toupper = __C_ctype_toupper;
-+ _M_tolower = __C_ctype_tolower;
-+ _M_table = __table ? __table : __C_ctype_b;
-+ _M_c_locale_ctype = _S_c_locale;
-+ }
-+
-+ char
-+ ctype<char>::do_toupper(char __c) const
-+ { return _M_toupper[static_cast<unsigned char>(__c)]; }
-+
-+ const char*
-+ ctype<char>::do_toupper(char* __low, const char* __high) const
-+ {
-+ while (__low < __high)
-+ {
-+ *__low = _M_toupper[static_cast<unsigned char>(*__low)];
-+ ++__low;
-+ }
-+ return __high;
-+ }
-+
-+ char
-+ ctype<char>::do_tolower(char __c) const
-+ { return _M_tolower[static_cast<unsigned char>(__c)]; }
-+
-+ const char*
-+ ctype<char>::do_tolower(char* __low, const char* __high) const
-+ {
-+ while (__low < __high)
-+ {
-+ *__low = _M_tolower[static_cast<unsigned char>(*__low)];
-+ ++__low;
-+ }
-+ return __high;
-+ }
-diff -urN gcc-3.3.2/libstdc++-v3/config/os/uclibc/os_defines.h gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/os_defines.h
---- gcc-3.3.2/libstdc++-v3/config/os/uclibc/os_defines.h 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-3.3.2-uClibc/libstdc++-v3/config/os/uclibc/os_defines.h 2004-01-09 04:56:13.000000000 -0600
-@@ -0,0 +1,56 @@
-+// Specific definitions for GNU/Linux -*- C++ -*-
-+
-+// Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library. This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING. If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction. Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License. This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+#ifndef _GLIBCPP_OS_DEFINES
-+#define _GLIBCPP_OS_DEFINES 1
-+
-+// System-specific #define, typedefs, corrections, etc, go here. This
-+// file will come before all others.
-+
-+// This keeps isanum, et al from being propagated as macros.
-+#define __NO_CTYPE 1
-+
-+#include <features.h>
-+
-+// These systems have declarations mismatching those in libio.h by
-+// omitting throw qualifiers. Cleanest way out is to not provide
-+// throw-qualifiers at all. Defining it as empty here will make libio.h
-+// not define it.
-+#undef __THROW
-+#define __THROW
-+
-+// Tell Glibc not to try to provide its own inline versions of
-+// some math functions. Those cause assembly-time clashes with
-+// our definitions.
-+#define __NO_MATH_INLINES
-+
-+// We must not see the optimized string functions GNU libc defines.
-+#define __NO_STRING_INLINES
-+
-+#endif
+++ /dev/null
---- gcc/gcc/loop.c 14 Feb 2004 14:46:03 -0000 1.488.2.3
-+++ gcc/gcc/loop.c 28 Apr 2004 22:02:53 -0000
-@@ -929,6 +929,7 @@
- || (! (GET_CODE (SET_SRC (set)) == REG
- && (REGNO (SET_SRC (set))
- < FIRST_PSEUDO_REGISTER))))
-+ && regno >= FIRST_PSEUDO_REGISTER
- /* This test is not redundant; SET_SRC (set) might be
- a call-clobbered register and the life of REGNO
- might span a call. */
+++ /dev/null
-Warning! The powerpc patch (rs6000/linux.h) is hack-ish and would
-definitely need to be improved to be acceptable upstream. Also,
-this patch isn't complete as it only supports i386, arm, mips, and
-powerpc (rs6000).
-diff -urN gcc-20011006/config.sub gcc-20011006-new/config.sub
---- gcc-20011006/config.sub 2004-01-13 06:15:28.000000000 -0600
-+++ gcc-20011006-new/config.sub 2004-01-10 11:09:35.000000000 -0600
-@@ -68,7 +68,7 @@
- # Here we must recognize all the valid KERNEL-OS combinations.
- maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
- case $maybe_os in
-- linux-gnu*)
-+ linux-gnu* | linux-uclibc*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
-@@ -936,7 +936,8 @@
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-+ | -mingw32* | -linux-gnu* | -linux-uclibc* \
-+ | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* )
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
-diff -urN gcc-20011006/gcc/config/arm/linux-elf.h gcc-20011006-new/gcc/config/arm/linux-elf.h
---- gcc-20011006/gcc/config/arm/linux-elf.h 2004-01-13 06:15:28.000000000 -0600
-+++ gcc-20011006-new/gcc/config/arm/linux-elf.h 2004-01-10 11:12:11.000000000 -0600
-@@ -90,6 +90,18 @@
- #define ENDFILE_SPEC \
- "%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s"
-
-+#ifdef USE_UCLIBC
-+#define LINK_SPEC "%{h*} %{version:-v} \
-+ %{b} %{Wl,*:%*} \
-+ %{static:-Bstatic} \
-+ %{shared:-shared} \
-+ %{symbolic:-Bsymbolic} \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0} \
-+ -X \
-+ %{mbig-endian:-EB}" \
-+ SUBTARGET_EXTRA_LINK_SPEC
-+#else
- #define LINK_SPEC "%{h*} %{version:-v} \
- %{b} %{Wl,*:%*} \
- %{static:-Bstatic} \
-@@ -100,6 +112,7 @@
- -X \
- %{mbig-endian:-EB}" \
- SUBTARGET_EXTRA_LINK_SPEC
-+#endif
-
- #undef CPP_PREDEFINES
- #define CPP_PREDEFINES \
-diff -urN gcc-20011006/gcc/config/i386/linux.h gcc-20011006-new/gcc/config/i386/linux.h
---- gcc-20011006/gcc/config/i386/linux.h 2001-04-03 17:38:59.000000000 -0500
-+++ gcc-20011006-new/gcc/config/i386/linux.h 2004-01-10 11:15:38.000000000 -0600
-@@ -199,6 +199,15 @@
- %{static:-static}}}"
- #endif
- #else
-+#if defined USE_UCLIBC
-+#define LINK_SPEC "-m elf_i386 %{shared:-shared} \
-+ %{!shared: \
-+ %{!ibcs: \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+ %{static:-static}}}"
-+#else
- #define LINK_SPEC "-m elf_i386 %{shared:-shared} \
- %{!shared: \
- %{!ibcs: \
-@@ -207,6 +216,7 @@
- %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
- %{static:-static}}}"
- #endif
-+#endif
-
- /* Get perform_* macros to build libgcc.a. */
- #include "i386/perform.h"
-diff -urN gcc-20011006/gcc/config/mips/linux.h gcc-20011006-new/gcc/config/mips/linux.h
---- gcc-20011006/gcc/config/mips/linux.h 2004-01-13 06:15:28.000000000 -0600
-+++ gcc-20011006-new/gcc/config/mips/linux.h 2004-01-10 11:16:39.000000000 -0600
-@@ -154,6 +154,17 @@
-
- /* Borrowed from sparc/linux.h */
- #undef LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define LINK_SPEC \
-+ "%(endian_spec) \
-+ %{shared:-shared} \
-+ %{!shared: \
-+ %{!ibcs: \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+ %{static:-static}}}"
-+#else
- #define LINK_SPEC \
- "%(endian_spec) \
- %{shared:-shared} \
-@@ -163,6 +174,7 @@
- %{rdynamic:-export-dynamic} \
- %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}} \
- %{static:-static}}}"
-+#endif
-
-
- #undef SUBTARGET_ASM_SPEC
-diff -urN old/gcc-20011006/gcc/config/mips/t-linux-uclibc gcc-20011006/gcc/config/mips/t-linux-uclibc
---- old/gcc-20011006/gcc/config/mips/t-linux-uclibc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-20011006/gcc/config/mips/t-linux-uclibc 2004-01-14 02:51:10.000000000 -0600
-@@ -0,0 +1 @@
-+T_CFLAGS = -DUSE_UCLIBC
-diff -urN gcc-20011006/gcc/config/rs6000/linux.h gcc-20011006-new/gcc/config/rs6000/linux.h
---- gcc-20011006/gcc/config/rs6000/linux.h 2001-04-03 17:38:59.000000000 -0500
-+++ gcc-20011006-new/gcc/config/rs6000/linux.h 2004-01-10 11:15:38.000000000 -0600
-@@ -36,12 +36,21 @@
- #define CPP_OS_DEFAULT_SPEC "%(cpp_os_linux)"
-
- #undef LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define LINK_SPEC "-m elf32ppclinux %{G*} %{shared:-shared} \
-+ %{!shared: \
-+ %{!static: \
-+ %{rdynamic:-export-dynamic} \
-+ %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+ %{static:-static}}"
-+#else
- #define LINK_SPEC "-m elf32ppclinux %{G*} %{shared:-shared} \
- %{!shared: \
- %{!static: \
- %{rdynamic:-export-dynamic} \
- %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}} \
- %{static:-static}}"
-+#endif
-
- #undef LIB_DEFAULT_SPEC
- #define LIB_DEFAULT_SPEC "%(lib_linux)"
-diff -urN gcc-20011006/gcc/config/t-linux-uclibc gcc-20011006-new/gcc/config/t-linux-uclibc
---- gcc-20011006/gcc/config/t-linux-uclibc 1969-12-31 18:00:00.000000000 -0600
-+++ gcc-20011006-new/gcc/config/t-linux-uclibc 2004-01-10 11:18:46.000000000 -0600
-@@ -0,0 +1,18 @@
-+T_CFLAGS = -DUSE_UCLIBC
-+
-+# Don't run fixproto
-+STMP_FIXPROTO =
-+
-+# Don't install "assert.h" in gcc. We use the one in glibc.
-+INSTALL_ASSERT_H =
-+
-+# Compile crtbeginS.o and crtendS.o with pic.
-+CRTSTUFF_T_CFLAGS_S = -fPIC
-+# Compile libgcc2.a with pic.
-+TARGET_LIBGCC2_CFLAGS = -fPIC
-+
-+# Do not build libgcc1. Let gcc generate those functions. The GNU/Linux
-+# C library can handle them.
-+LIBGCC1 =
-+CROSS_LIBGCC1 =
-+LIBGCC1_TEST =
-diff -urN gcc-20011006/gcc/configure gcc-20011006-new/gcc/configure
---- gcc-20011006/gcc/configure 2004-01-13 06:15:28.000000000 -0600
-+++ gcc-20011006-new/gcc/configure 2004-01-10 11:28:54.000000000 -0600
-@@ -3219,6 +3219,24 @@
- ;;
- esac
- ;;
-+ arm*-*-linux-uclibc*) # ARM GNU/Linux with ELF - uClibc
-+ xm_file=arm/xm-linux.h
-+ xmake_file=x-linux
-+ tm_file="arm/linux-elf.h"
-+ case $machine in
-+ armv2*-*-*)
-+ tm_file="arm/linux-elf26.h $tm_file"
-+ ;;
-+ esac
-+ tmake_file="t-linux-uclibc arm/t-linux"
-+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-+ gnu_ld=yes
-+ case x${enable_threads} in
-+ x | xyes | xpthreads | xposix)
-+ thread_file='posix'
-+ ;;
-+ esac
-+ ;;
- arm*-*-aout)
- tm_file=arm/aout.h
- tmake_file=arm/t-bare
-@@ -3631,6 +3649,18 @@
- thread_file='single'
- fi
- ;;
-+ i[34567]86-*-linux*uclibc*) # Intel 80386's running GNU/Linux
-+ # with ELF format using uClibc
-+ xmake_file=x-linux
-+ tm_file=i386/linux.h
-+ tmake_file="t-linux-uclibc i386/t-crtstuff"
-+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-+ gnu_ld=yes
-+ float_format=i386
-+ if test x$enable_threads = xyes; then
-+ thread_file='posix'
-+ fi
-+ ;;
- i[34567]86-*-linux-gnu*) # Intel 80386's running GNU/Linux
- # aka GNU/Linux C library 6
- xmake_file=x-linux
-@@ -4696,7 +4726,19 @@
- # On NetBSD, the headers are already okay, except for math.h.
- tmake_file=t-netbsd
- ;;
-- mips*-*-linux*) # Linux MIPS, either endian.
-+ mips*-*-linux-uclibc*) # Linux (uclibc) MIPS, either endian.
-+ tmake_file=mips/t-linux-uclibc
-+ xmake_file=x-linux
-+ xm_file="xm-siglist.h ${xm_file}"
-+ case $machine in
-+ mipsel-*) tm_file="mips/elfl.h mips/linux.h" ;;
-+ *) tm_file="mips/elf.h mips/linux.h" ;;
-+ esac
-+ extra_parts="crtbegin.o crtend.o"
-+ gnu_ld=yes
-+ gas=yes
-+ ;;
-+ mips*-*-linux*) # Linux MIPS, either endian.
- xmake_file=x-linux
- xm_file="xm-siglist.h ${xm_file}"
- case $machine in
-@@ -5159,6 +5201,24 @@
- thread_file='posix'
- fi
- ;;
-+ powerpc-*-linux-uclibc*)
-+ tm_file=rs6000/linux.h
-+ xm_file="xm-siglist.h rs6000/xm-sysv4.h"
-+ xm_defines="USG ${xm_defines}"
-+ out_file=rs6000/rs6000.c
-+ if test x$gas = xyes
-+ then
-+ tmake_file="rs6000/t-ppcos t-linux-uclibc rs6000/t-ppccomm"
-+ else
-+ tmake_file="rs6000/t-ppc t-linux-uclibc rs6000/t-ppccomm"
-+ fi
-+ xmake_file=x-linux
-+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-+ extra_headers=ppc-asm.h
-+ if test x$enable_threads = xyes; then
-+ thread_file='posix'
-+ fi
-+ ;;
- powerpc-wrs-vxworks*)
- cpu_type=rs6000
- xm_file="xm-siglist.h rs6000/xm-sysv4.h"
-diff -urN gcc-20011006/ltconfig gcc-20011006-new/ltconfig
---- gcc-20011006/ltconfig 1999-06-21 21:35:12.000000000 -0500
-+++ gcc-20011006-new/ltconfig 2004-01-10 11:34:23.000000000 -0600
-@@ -436,6 +436,7 @@
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case "$host_os" in
- linux-gnu*) ;;
-+linux-uclibc*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-
-@@ -1773,6 +1774,22 @@
- fi
- ;;
-
-+linux-uclibc*)
-+ version_type=linux
-+ need_lib_prefix=no
-+ need_version=no
-+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+ soname_spec='${libname}${release}.so$major'
-+ finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
-+ shlibpath_var=LD_LIBRARY_PATH
-+ shlibpath_overrides_runpath=no
-+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-+ file_magic_cmd=/usr/bin/file
-+ file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ # Assume using the uClibc dynamic linker.
-+ dynamic_linker="uClibc ld.so"
-+ ;;
-+
- netbsd*)
- version_type=sunos
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+++ /dev/null
-diff -urN gdb-5.3/bfd/config.bfd gdb-5.3-new/bfd/config.bfd
---- gdb-5.3/bfd/config.bfd 2002-09-05 15:34:35.000000000 -0500
-+++ gdb-5.3-new/bfd/config.bfd 2004-01-11 06:25:31.000000000 -0600
-@@ -83,7 +83,7 @@
- targ_defvec=ecoffalpha_little_vec
- targ_selvecs=bfd_elf64_alpha_vec
- ;;
-- alpha*-*-linux-gnu* | alpha*-*-elf*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc* | alpha*-*-elf*)
- targ_defvec=bfd_elf64_alpha_vec
- targ_selvecs=ecoffalpha_little_vec
- ;;
-@@ -97,7 +97,8 @@
- targ_defvec=bfd_elf64_ia64_aix_little_vec
- targ_selvecs="bfd_elf64_ia64_aix_big_vec bfd_efi_app_ia64_vec"
- ;;
-- ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | ia64*-*-elf*)
-+ ia64*-*-freebsd* | ia64*-*-netbsd* | ia64*-*-linux-gnu* | \
-+ ia64*-*-linux-uclibc* | ia64*-*-elf*)
- targ_defvec=bfd_elf64_ia64_little_vec
- targ_selvecs="bfd_elf64_ia64_big_vec bfd_efi_app_ia64_vec"
- ;;
-@@ -176,11 +177,12 @@
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-- armeb-*-elf | arm*b-*-linux-gnu*)
-+ armeb-*-elf | arm*b-*-linux-gnu* | arm*b-*-linux-uclibc*)
- targ_defvec=bfd_elf32_bigarm_vec
- targ_selvecs=bfd_elf32_littlearm_vec
- ;;
-- arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-conix* | arm*-*-uclinux*)
-+ arm-*-elf | arm-*-freebsd* | arm*-*-linux-gnu* | arm*-*-linux-uclibc* | \
-+ arm*-*-conix* | arm*-*-uclinux*)
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
-@@ -313,7 +315,7 @@
- ;;
-
- #ifdef BFD64
-- hppa*64*-*-linux-gnu*)
-+ hppa*64*-*-linux-gnu* | hppa*64*-*-linux-uclibc*)
- targ_defvec=bfd_elf64_hppa_linux_vec
- targ_selvecs=bfd_elf64_hppa_vec
- ;;
-@@ -324,7 +326,7 @@
- ;;
- #endif
-
-- hppa*-*-linux-gnu*)
-+ hppa*-*-linux-gnu* | hppa*-*-linux-uclibc*)
- targ_defvec=bfd_elf32_hppa_linux_vec
- targ_selvecs=bfd_elf32_hppa_vec
- ;;
-@@ -424,7 +426,7 @@
- targ_selvecs=bfd_elf32_i386_vec
- targ_underscore=yes
- ;;
-- i[3456]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- targ_defvec=bfd_elf32_i386_vec
- targ_selvecs="i386linux_vec bfd_efi_app_ia32_vec"
- targ64_selvecs=bfd_elf64_x86_64_vec
-@@ -438,7 +440,7 @@
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386netbsd_vec i386coff_vec bfd_efi_app_ia32_vec"
- ;;
-- x86_64-*-linux-gnu*)
-+ x86_64-*-linux-gnu* | x86_64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_x86_64_vec
- targ_selvecs="bfd_elf32_i386_vec i386linux_vec bfd_efi_app_ia32_vec"
- ;;
-@@ -589,7 +591,7 @@
- targ_defvec=hp300hpux_vec
- targ_underscore=yes
- ;;
-- m68*-*-linux*aout*)
-+ m68*-*-linux-gnu* | m68*-*-linux-uclibc*)
- targ_defvec=m68klinux_vec
- targ_selvecs=bfd_elf32_m68k_vec
- targ_underscore=yes
-@@ -865,7 +867,8 @@
- ;;
- #endif
- powerpc-*-*bsd* | powerpc-*-elf* | powerpc-*-sysv4* | powerpc-*-eabi* | \
-- powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-rtems* | \
-+ powerpc-*-solaris2* | powerpc-*-linux-gnu* | powerpc-*-linux-uclibc* | \
-+ powerpc-*-rtems* | \
- powerpc-*-chorus* | powerpc-*-vxworks* | powerpc-*-windiss*)
- targ_defvec=bfd_elf32_powerpc_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpcle_vec ppcboot_vec"
-@@ -887,8 +890,8 @@
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpcqnx_vec ppcboot_vec"
- ;;
- powerpcle-*-elf* | powerpcle-*-sysv4* | powerpcle-*-eabi* | \
-- powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-vxworks* |\
-- powerpcle-*-rtems*)
-+ powerpcle-*-solaris2* | powerpcle-*-linux-gnu* | powerpcle-*-linux-uclibc* |\
-+ powerpcle-*-vxworks* | powerpcle-*-rtems*)
- targ_defvec=bfd_elf32_powerpcle_vec
- targ_selvecs="rs6000coff_vec bfd_elf32_powerpc_vec ppcboot_vec"
- targ64_selvecs="bfd_elf64_powerpc_vec bfd_elf64_powerpcle_vec"
-@@ -1038,7 +1041,7 @@
- targ_selvecs="bfd_elf32_sparc_vec sunos_big_vec"
- targ_underscore=yes
- ;;
-- sparc-*-linux-gnu*)
-+ sparc-*-linux-gnu* | sparc-*-linux-uclibc*)
- targ_defvec=bfd_elf32_sparc_vec
- targ_selvecs="sparclinux_vec bfd_elf64_sparc_vec sunos_big_vec"
- ;;
-@@ -1081,7 +1084,7 @@
- targ_defvec=sunos_big_vec
- targ_underscore=yes
- ;;
-- sparc64-*-linux-gnu*)
-+ sparc64-*-linux-gnu* | sparc64-*-linux-uclibc*)
- targ_defvec=bfd_elf64_sparc_vec
- targ_selvecs="bfd_elf32_sparc_vec sparclinux_vec sunos_big_vec"
- ;;
-diff -urN gdb-5.3/bfd/configure gdb-5.3-new/bfd/configure
---- gdb-5.3/bfd/configure 2002-08-28 05:38:44.000000000 -0500
-+++ gdb-5.3-new/bfd/configure 2004-01-11 06:27:15.000000000 -0600
-@@ -1677,6 +1677,11 @@
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-+linux-uclibc*)
-+ lt_cv_deplibs_check_method=pass_all
-+ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+ ;;
-+
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-@@ -5067,7 +5072,7 @@
- alpha*-*-freebsd*)
- COREFILE=''
- ;;
-- alpha*-*-linux-gnu*)
-+ alpha*-*-linux-gnu* | alpha*-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/alphalinux.h"'
- ;;
-@@ -5126,7 +5131,7 @@
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386mach3.h"'
- ;;
-- i[3456]86-*-linux-gnu*)
-+ i[3-7]86-*-linux-gnu* | i[3-7]86-*-linux-uclibc*)
- COREFILE=trad-core.lo
- TRAD_HEADER='"hosts/i386linux.h"'
- ;;
+++ /dev/null
-Patch pending upstream, probably acceptable.
---------------------------------------------
-
-
-
-Daniel Jacobowitz <drow@mvista.com> writes:
-> I like this. The way func_frame_chain_valid should really be used is
-> by something like:
->
-> /* NOTE: tm-i386nw.h and tm-i386v4.h override this. */
-> set_gdbarch_frame_chain_valid (gdbarch, file_frame_chain_valid);
->
-> (copied from i386-tdep.c).
->
-> Does this patch work for you?
-
-Yes, thanks. I've included a revised version of my patch below.
-
-> I'm curious as to why we can't just set this universally, or at least a
-> little more globally. Most things that have a main () use it as a
-> normal main (). I'd propose that we set it as the default frame chain,
-> and provide/document an option to ignore inside_main_func.
-
-Well, gdbarch is never supposed to change the default behavior of
-macros; this helps us convert pre-gdbarch targets incrementally.
-Simply turning on gdbarch for one's target ideally wouldn't change its
-behavior at all.
-
-
-[Patch revised for Debian snapshot]
---- snap/gdb/i386-linux-tdep.c.orig 2002-08-18 19:53:57.000000000 -0400
-+++ snap/gdb/i386-linux-tdep.c 2002-08-18 19:54:31.000000000 -0400
-@@ -452,6 +452,9 @@
-
- set_solib_svr4_fetch_link_map_offsets (gdbarch,
- i386_linux_svr4_fetch_link_map_offsets);
-+
-+ set_gdbarch_frame_chain_valid (gdbarch,
-+ generic_func_frame_chain_valid);
- }
-
- /* Provide a prototype to silence -Wmissing-prototypes. */
-[Hurd needs 6. Take 8, since it does no real harm.]
-
-
-Package: gdb
-Severity: normal
-Tags: patch, sid
-
-Hello,
-
-GDB will crash on the Hurd after issuing the 'show' and hitting enter
-a few times:
-
-../../gdb/ui-out.c:130: gdb-internal-error: push_level: Assertion +`uiout->level >= 0 && uiout->level < MAX_UI_OUT_LEVELS' failed.
-
-the problem is that MAX_UI_OUT_LEVELS is not high enough for the extra
-option we have on the Hurd, it should be rised to 6 then, which works
-fine:
-
---- gdb-5.2.cvs20020401/gdb/ui-out.c~ Fri May 3 02:19:20 2002
-+++ gdb-5.2.cvs20020401/gdb/ui-out.c Fri May 3 02:19:32 2002
-@@ -45,7 +45,7 @@
- is always available. Stack/nested level 0 is reserved for the
- top-level result. */
-
--enum { MAX_UI_OUT_LEVELS = 5 };
-+enum { MAX_UI_OUT_LEVELS = 8 };
-
- struct ui_out_level
- {
-
---
-Robert Millan
-
-"5 years from now everyone will be running
-free GNU on their 200 MIPS, 64M SPARCstation-5"
-
- Andrew S. Tanenbaum, 30 Jan 1992
-
-
-Submitted upstream, not liked very much. It's a hack, but it will do for
-now.
-
-2002-07-31 Daniel Jacobowitz <drow@mvista.com>
-
- Fix PR gdb/568
- * thread-db.c (lwp_from_thread): Only warn if unable to find
- the thread.
-
-Index: thread-db.c
-===================================================================
-RCS file: /cvs/src/src/gdb/thread-db.c,v
-retrieving revision 1.22
-diff -u -p -r1.22 thread-db.c
---- gdb/gdb/thread-db.c 23 Mar 2002 17:38:13 -0000 1.22
-+++ gdb/gdb/thread-db.c 31 Jul 2002 16:29:52 -0000
-@@ -260,6 +260,12 @@ lwp_from_thread (ptid_t ptid)
- return ptid;
-
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (ptid), &th);
-+ if (err == TD_ERR)
-+ {
-+ warning ("Cannot find thread %ld: %s",
-+ (long) GET_THREAD (ptid), thread_db_err_str (err));
-+ return ptid;
-+ }
- if (err != TD_OK)
- error ("Cannot find thread %ld: %s",
- (long) GET_THREAD (ptid), thread_db_err_str (err));
-From Michael Fedrowitz <michaelf@debian.org>. Not submitted to FSF yet.
-
- Hi,
-
-gdb fails to build from source on m68k because some definitions have
-been removed from tm-m68k.h. The patch below readds them.
-
--Michael
-
-
-diff -urN gdb-5.2.cvs20020818.orig/gdb/config/m68k/tm-m68k.h gdb-5.2.cvs20020818/gdb/config/m68k/tm-m68k.h
---- gdb-5.2.cvs20020818.orig/gdb/config/m68k/tm-m68k.h 2002-07-10 19:01:38.000000000 +0200
-+++ gdb-5.2.cvs20020818/gdb/config/m68k/tm-m68k.h 2002-10-06 18:01:59.000000000 +0200
-@@ -26,8 +26,11 @@
- /* Generic 68000 stuff, to be included by other tm-*.h files. */
-
- /* D0_REGNM and A0_REGNUM must be defined here because they are
-- used by the monitor. */
-+ used by the monitor. FPC_REGNUM, FPS_REGNUM and FPI_REGNUM are
-+ defined here because they are used by m68klinux-nat.c. */
-
- #define D0_REGNUM 0
- #define A0_REGNUM 8
--
-+#define FPC_REGNUM 26
-+#define FPS_REGNUM 27
-+#define FPI_REGNUM 28
-
-
-2002-11-24 Daniel Jacobowitz <drow@mvista.com>
-
- * doublest.c (convert_floatformat_to_doublest): Cast exp_bias to int.
- * config/alpha/alpha-linux.mh (MH_CFLAGS): Add -mieee.
-
---- gdb-5.2.debian90.cvs20021120/gdb/doublest.c.orig 2002-11-24 17:48:16.000000000 -0500
-+++ gdb-5.2.debian90.cvs20021120/gdb/doublest.c 2002-11-24 17:48:25.000000000 -0500
-@@ -177,7 +177,7 @@
- if (!special_exponent)
- exponent -= fmt->exp_bias;
- else if (exponent == 0)
-- exponent = 1 - fmt->exp_bias;
-+ exponent = 1 - (int)fmt->exp_bias;
-
- /* Build the result algebraically. Might go infinite, underflow, etc;
- who cares. */
---- gdb-5.2.debian90.cvs20021120/gdb/config/alpha/alpha-linux.mh.orig 2002-11-24 17:50:30.000000000 -0500
-+++ gdb-5.2.debian90.cvs20021120/gdb/config/alpha/alpha-linux.mh 2002-11-24 17:50:41.000000000 -0500
-@@ -8,3 +8,5 @@
-
- MMALLOC =
- MMALLOC_CFLAGS = -DNO_MMALLOC
-+
-+MH_CFLAGS = -mieee
-In CVS but not in 5.3 branch...
-
-2002-10-23 Daniel Jacobowitz <drow@mvista.com>
-
- * lin-lwp.c (lin_lwp_resume): Remove resume_all test for !step.
-
-Index: lin-lwp.c
-===================================================================
-RCS file: /cvs/src/src/gdb/lin-lwp.c,v
-retrieving revision 1.35
-diff -u -p -r1.35 lin-lwp.c
---- gdb-5.2.90/gdb/lin-lwp.c 27 Aug 2002 22:37:06 -0000 1.35
-+++ gdb-5.2.90/gdb/lin-lwp.c 23 Oct 2002 04:23:13 -0000
-@@ -579,11 +579,8 @@ lin_lwp_resume (ptid_t ptid, int step, e
- struct lwp_info *lp;
- int resume_all;
-
-- /* Apparently the interpretation of PID is dependent on STEP: If
-- STEP is non-zero, a specific PID means `step only this process
-- id'. But if STEP is zero, then PID means `continue *all*
-- processes, but give the signal only to this one'. */
-- resume_all = (PIDGET (ptid) == -1) || !step;
-+ /* A specific PTID means `step only this process id'. */
-+ resume_all = (PIDGET (ptid) == -1);
-
- if (resume_all)
- iterate_over_lwps (resume_set_callback, NULL);
-
-Not submitted yet, testing.
-
---- gdb-5.2.90/gdb/alpha-tdep.c.orig Sun Nov 24 21:42:53 2002
-+++ gdb-5.2.90/gdb/alpha-tdep.c Sun Nov 24 21:48:26 2002
-@@ -99,10 +99,12 @@
-
- static alpha_extra_func_info_t heuristic_proc_desc (CORE_ADDR,
- CORE_ADDR,
-- struct frame_info *);
-+ struct frame_info *,
-+ int);
-
- static alpha_extra_func_info_t find_proc_desc (CORE_ADDR,
-- struct frame_info *);
-+ struct frame_info *,
-+ int);
-
- #if 0
- static int alpha_in_lenient_prologue (CORE_ADDR, CORE_ADDR);
-@@ -512,7 +514,7 @@
- if (tmp != 0)
- pc = tmp;
-
-- proc_desc = find_proc_desc (pc, frame->next);
-+ proc_desc = find_proc_desc (pc, frame->next, 1);
- pcreg = proc_desc ? PROC_PC_REG (proc_desc) : ALPHA_RA_REGNUM;
-
- if (frame->signal_handler_caller)
-@@ -596,10 +598,10 @@
-
- static alpha_extra_func_info_t
- heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc,
-- struct frame_info *next_frame)
-+ struct frame_info *next_frame, int read_sp_p)
- {
-- CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
-- CORE_ADDR vfp = sp;
-+ CORE_ADDR sp;
-+ CORE_ADDR vfp;
- CORE_ADDR cur_pc;
- int frame_size;
- int has_frame_reg = 0;
-@@ -607,6 +609,11 @@
- int pcreg = -1;
- int regno;
-
-+ if (read_sp_p)
-+ vfp = sp = read_next_frame_reg (next_frame, SP_REGNUM);
-+ else
-+ vfp = sp = 0;
-+
- if (start_pc == 0)
- return NULL;
- memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc));
-@@ -761,7 +768,7 @@
- CORE_ADDR func_addr, func_end;
-
- if (!proc_desc)
-- proc_desc = find_proc_desc (pc, NULL);
-+ proc_desc = find_proc_desc (pc, NULL, 0);
-
- if (proc_desc)
- {
-@@ -807,7 +814,7 @@
- }
-
- static alpha_extra_func_info_t
--find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame)
-+find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int read_sp_p)
- {
- alpha_extra_func_info_t proc_desc;
- struct block *b;
-@@ -879,7 +886,7 @@
- {
- alpha_extra_func_info_t found_heuristic =
- heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
-- pc, next_frame);
-+ pc, next_frame, read_sp_p);
- if (found_heuristic)
- {
- PROC_LOCALOFF (found_heuristic) =
-@@ -921,7 +928,7 @@
- startaddr = heuristic_proc_start (pc);
-
- proc_desc =
-- heuristic_proc_desc (startaddr, pc, next_frame);
-+ heuristic_proc_desc (startaddr, pc, next_frame, read_sp_p);
- }
- return proc_desc;
- }
-@@ -937,7 +944,7 @@
- if (saved_pc == 0 || inside_entry_file (saved_pc))
- return 0;
-
-- proc_desc = find_proc_desc (saved_pc, frame);
-+ proc_desc = find_proc_desc (saved_pc, frame, 1);
- if (!proc_desc)
- return 0;
-
-@@ -979,7 +986,7 @@
- {
- /* Use proc_desc calculated in frame_chain */
- alpha_extra_func_info_t proc_desc =
-- frame->next ? cached_proc_desc : find_proc_desc (frame->pc, frame->next);
-+ frame->next ? cached_proc_desc : find_proc_desc (frame->pc, frame->next, 1);
-
- frame->extra_info = (struct frame_extra_info *)
- frame_obstack_alloc (sizeof (struct frame_extra_info));
-@@ -1291,7 +1298,7 @@
- /* we need proc_desc to know how to restore the registers;
- if it is NULL, construct (a temporary) one */
- if (proc_desc == NULL)
-- proc_desc = find_proc_desc (frame->pc, frame->next);
-+ proc_desc = find_proc_desc (frame->pc, frame->next, 1);
-
- /* Question: should we copy this proc_desc and save it in
- frame->proc_desc? If we do, who will free it?
-Not yet submitted upstream. This requires some serious thinking about.
-If the target stack worked in any logical way, this wouldn't be necessary...
-ending up with roughly:
- thread_stratum: thread-db (silent reference to lin-lwp)
- core_stratum: corelow
- exec_stratum: exec
- dummy_stratum: dummy
-just makes no sense.
-
-This patch fixes debugging threaded applications which are statically linked
-without breaking debugging threaded core files. It also fixes the PIDs in
-generate-core-file'd corefiles. Mostly.
-
-diff -x '*~' -ur o/gdb-5.2.debian90.cvs20021120/gdb/corelow.c gdb-5.2.debian90.cvs20021120/gdb/corelow.c
---- o/gdb-5.2.debian90.cvs20021120/gdb/corelow.c 2002-09-18 13:23:15.000000000 -0400
-+++ gdb-5.2.debian90.cvs20021120/gdb/corelow.c 2002-12-03 14:03:32.000000000 -0500
-@@ -350,7 +350,7 @@
- bfd_map_over_sections (core_bfd, add_to_thread_list,
- bfd_get_section_by_name (core_bfd, ".reg"));
-
-- if (ontop)
-+ if (ontop || 1)
- {
- /* Fetch all registers from core file. */
- target_fetch_registers (-1);
-diff -x '*~' -ur o/gdb-5.2.debian90.cvs20021120/gdb/linux-proc.c gdb-5.2.debian90.cvs20021120/gdb/linux-proc.c
---- o/gdb-5.2.debian90.cvs20021120/gdb/linux-proc.c 2002-12-03 14:13:52.000000000 -0500
-+++ gdb-5.2.debian90.cvs20021120/gdb/linux-proc.c 2002-12-03 13:56:34.000000000 -0500
-@@ -177,7 +177,7 @@
- #ifdef FILL_FPXREGSET
- gdb_fpxregset_t fpxregs;
- #endif
-- unsigned long merged_pid = ptid_get_tid (ptid) << 16 | ptid_get_pid (ptid);
-+ unsigned long merged_pid = ptid_get_tid (ptid) << 16; /* | ptid_get_pid (ptid); */
-
- fill_gregset (&gregs, -1);
- note_data = (char *) elfcore_write_prstatus (obfd,
-diff -x '*~' -ur o/gdb-5.2.debian90.cvs20021120/gdb/target.c gdb-5.2.debian90.cvs20021120/gdb/target.c
---- o/gdb-5.2.debian90.cvs20021120/gdb/target.c 2002-09-18 13:23:22.000000000 -0400
-+++ gdb-5.2.debian90.cvs20021120/gdb/target.c 2002-12-03 14:06:07.000000000 -0500
-@@ -1589,6 +1589,7 @@
- dummy_target.to_find_memory_regions = dummy_find_memory_regions;
- dummy_target.to_make_corefile_notes = dummy_make_corefile_notes;
- dummy_target.to_magic = OPS_MAGIC;
-+ cleanup_target (&dummy_target);
- }
- \f
-
-diff -x '*~' -ur o/gdb-5.2.debian90.cvs20021120/gdb/thread-db.c gdb-5.2.debian90.cvs20021120/gdb/thread-db.c
---- o/gdb-5.2.debian90.cvs20021120/gdb/thread-db.c 2002-12-03 14:13:50.000000000 -0500
-+++ gdb-5.2.debian90.cvs20021120/gdb/thread-db.c 2002-12-03 13:39:54.000000000 -0500
-@@ -57,6 +57,31 @@
- /* Non-zero if we're using this module's target vector. */
- static int using_thread_db;
-
-+/* Macros to pass an event to the next target if we should not be handling it
-+ here in the thread_stratum. */
-+#define FIND_NEXT_TARGET(METHOD_NAME) \
-+ struct target_ops *next_target = &thread_db_ops; \
-+ while (1) \
-+ { \
-+ next_target = find_target_beneath (next_target); \
-+ if (next_target->METHOD_NAME != NULL) \
-+ break; \
-+ }
-+
-+#define MAYBE_HAND_DOWN(METHOD_NAME,ARGS) \
-+ if (proc_handle.pid == 0) \
-+ { \
-+ FIND_NEXT_TARGET (METHOD_NAME); \
-+ (*next_target->METHOD_NAME) ARGS; \
-+ return; \
-+ }
-+#define MAYBE_HAND_DOWN_RETURN(METHOD_NAME,ARGS) \
-+ if (proc_handle.pid == 0) \
-+ { \
-+ FIND_NEXT_TARGET (METHOD_NAME); \
-+ return (*next_target->METHOD_NAME) ARGS; \
-+ }
-+
- /* Non-zero if we have to keep this module's target vector active
- across re-runs. */
- static int keep_thread_db;
-@@ -489,9 +514,7 @@
- {
- td_err_e err;
-
-- /* Don't attempt to use thread_db on targets which can not run
-- (core files). */
-- if (objfile == NULL || !target_has_execution)
-+ if (objfile == NULL)
- {
- /* All symbols have been discarded. If the thread_db target is
- active, deactivate it now. */
-@@ -515,7 +538,10 @@
- /* Initialize the structure that identifies the child process. Note
- that at this point there is no guarantee that we actually have a
- child process. */
-- proc_handle.pid = GET_PID (inferior_ptid);
-+ if (target_has_execution)
-+ proc_handle.pid = GET_PID (inferior_ptid);
-+ else
-+ proc_handle.pid = 0;
-
- /* Now attempt to open a connection to the thread library. */
- err = td_ta_new_p (&proc_handle, &thread_agent);
-@@ -758,6 +784,9 @@
- struct cleanup *old_chain = save_inferior_ptid ();
- int xfer;
-
-+ MAYBE_HAND_DOWN_RETURN (to_xfer_memory, (memaddr, myaddr, len, write,
-+ attrib, target));
-+
- if (is_thread (inferior_ptid))
- {
- /* FIXME: This seems to be necessary to make sure breakpoints
-@@ -782,6 +811,8 @@
- gdb_prfpregset_t fpregset;
- td_err_e err;
-
-+ MAYBE_HAND_DOWN (to_fetch_registers, (regno));
-+
- if (!is_thread (inferior_ptid))
- {
- /* Pass the request to the target beneath us. */
-@@ -819,6 +850,8 @@
- gdb_prfpregset_t fpregset;
- td_err_e err;
-
-+ MAYBE_HAND_DOWN (to_store_registers, (regno));
-+
- if (!is_thread (inferior_ptid))
- {
- /* Pass the request to the target beneath us. */
-@@ -908,6 +941,8 @@
- td_thrinfo_t ti;
- td_err_e err;
-
-+ MAYBE_HAND_DOWN_RETURN (to_thread_alive, (ptid));
-+
- if (is_thread (ptid))
- {
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (ptid), &th);
-@@ -961,6 +996,8 @@
- {
- td_err_e err;
-
-+ MAYBE_HAND_DOWN (to_find_new_threads, ());
-+
- /* Iterate over all user-space threads to discover new threads. */
- err = td_ta_thr_iter_p (thread_agent, find_new_threads_callback, NULL,
- TD_THR_ANY_STATE, TD_THR_LOWEST_PRIORITY,
-@@ -972,6 +1009,8 @@
- static char *
- thread_db_pid_to_str (ptid_t ptid)
- {
-+ MAYBE_HAND_DOWN_RETURN (to_pid_to_str, (ptid));
-+
- if (is_thread (ptid))
- {
- static char buf[64];
-Trivial. Need to submit this.
-
---- gdb-5.2.debian90.cvs20021120/gdb/tracepoint.c.orig 2002-12-03 14:35:44.000000000 -0500
-+++ gdb-5.2.debian90.cvs20021120/gdb/tracepoint.c 2002-12-03 14:43:02.000000000 -0500
-@@ -861,6 +861,8 @@
- else
- line = gdb_readline (0);
-
-+ if (line == NULL || *line == EOF)
-+ break;
- linetype = validate_actionline (&line, t);
- if (linetype == BADLINE)
- continue; /* already warned -- collect another line */
-Fix build on Sparc.
-
---- gdb-5.3/gdb/sparc-nat.c.orig 2003-01-04 00:11:28.000000000 -0500
-+++ gdb-5.3/gdb/sparc-nat.c 2003-01-04 00:12:42.000000000 -0500
-@@ -33,6 +33,13 @@
- #include <sys/ptrace.h>
- #include <sys/wait.h>
- #ifdef __linux__
-+/* Sadly, <sys/ucontext.h> conflicts with <asm/reg.h> on Linux. And
-+ -D_GNU_SOURCE brings in <sys/ucontext.h> implicitly with <signal.h>.
-+ Hack around this. */
-+#undef FPU_REGS_TYPE
-+#define fpu asm_reg_fpu
-+#define fq asm_reg_fq
-+#define fpq asm_reg_fpq
- #include <asm/reg.h>
- #else
- #include <machine/reg.h>
-diff -urN gdb-5.3/gdb/gdbserver.orig/gdbreplay.c gdb-5.3/gdb/gdbserver/gdbreplay.c
---- gdb-5.3/gdb/gdbserver.orig/gdbreplay.c 2002-07-09 11:38:58.000000000 -0600
-+++ gdb-5.3/gdb/gdbserver/gdbreplay.c 2003-08-20 08:44:20.000000000 -0600
-@@ -54,14 +54,15 @@
- perror_with_name (char *string)
- {
- #ifndef STDC_HEADERS
-- extern int sys_nerr;
- extern char *sys_errlist[];
- extern int errno;
- #endif
- const char *err;
- char *combined;
-
-- err = (errno < sys_nerr) ? sys_errlist[errno] : "unknown error";
-+ err = strerror (errno);
-+ if (err == NULL)
-+ err = "unknown error";
- combined = (char *) alloca (strlen (err) + strlen (string) + 3);
- strcpy (combined, string);
- strcat (combined, ": ");
-diff -urN gdb-5.3/gdb/gdbserver.orig/low-hppabsd.c gdb-5.3/gdb/gdbserver/low-hppabsd.c
---- gdb-5.3/gdb/gdbserver.orig/low-hppabsd.c 2002-01-17 14:13:49.000000000 -0700
-+++ gdb-5.3/gdb/gdbserver/low-hppabsd.c 2003-08-20 08:46:04.000000000 -0600
-@@ -61,7 +61,7 @@
- execv (program, allargs);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", program,
-- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
-+ strerror (errno));
- fflush (stderr);
- _exit (0177);
- }
-diff -urN gdb-5.3/gdb/gdbserver.orig/low-lynx.c gdb-5.3/gdb/gdbserver/low-lynx.c
---- gdb-5.3/gdb/gdbserver.orig/low-lynx.c 2002-01-17 14:13:49.000000000 -0700
-+++ gdb-5.3/gdb/gdbserver/low-lynx.c 2003-08-20 08:46:18.000000000 -0600
-@@ -79,7 +79,7 @@
-
- fprintf (stderr, "GDBserver (process %d): Cannot exec %s: %s.\n",
- getpid (), program,
-- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
-+ strerror (errno));
- fflush (stderr);
- _exit (0177);
- }
-diff -urN gdb-5.3/gdb/gdbserver.orig/low-nbsd.c gdb-5.3/gdb/gdbserver/low-nbsd.c
---- gdb-5.3/gdb/gdbserver.orig/low-nbsd.c 2002-01-17 14:13:49.000000000 -0700
-+++ gdb-5.3/gdb/gdbserver/low-nbsd.c 2003-08-20 08:46:27.000000000 -0600
-@@ -137,7 +137,7 @@
- execv (program, allargs);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", program,
-- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
-+ strerror (errno));
- fflush (stderr);
- _exit (0177);
- }
-diff -urN gdb-5.3/gdb/gdbserver.orig/low-sparc.c gdb-5.3/gdb/gdbserver/low-sparc.c
---- gdb-5.3/gdb/gdbserver.orig/low-sparc.c 2002-01-17 14:13:50.000000000 -0700
-+++ gdb-5.3/gdb/gdbserver/low-sparc.c 2003-08-20 08:46:38.000000000 -0600
-@@ -44,7 +44,6 @@
- #include <sys/ptrace.h>
- #include <sys/reg.h>
-
--extern int sys_nerr;
- extern char **sys_errlist;
- extern int errno;
-
-@@ -67,7 +66,7 @@
- execv (program, allargs);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", program,
-- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
-+ strerror (errno));
- fflush (stderr);
- _exit (0177);
- }
-diff -urN gdb-5.3/gdb/gdbserver.orig/low-sun3.c gdb-5.3/gdb/gdbserver/low-sun3.c
---- gdb-5.3/gdb/gdbserver.orig/low-sun3.c 2002-01-17 14:13:50.000000000 -0700
-+++ gdb-5.3/gdb/gdbserver/low-sun3.c 2003-08-20 08:46:51.000000000 -0600
-@@ -41,7 +41,6 @@
- #include <sys/ptrace.h>
- #include <machine/reg.h>
-
--extern int sys_nerr;
- extern char **sys_errlist;
- extern int errno;
-
-@@ -64,7 +63,7 @@
- execv (program, allargs);
-
- fprintf (stderr, "Cannot exec %s: %s.\n", program,
-- errno < sys_nerr ? sys_errlist[errno] : "unknown error");
-+ strerror (errno));
- fflush (stderr);
- _exit (0177);
- }
-diff -urN gdb-5.3/gdb/gdbserver.orig/utils.c gdb-5.3/gdb/gdbserver/utils.c
---- gdb-5.3/gdb/gdbserver.orig/utils.c 2003-08-20 08:47:56.000000000 -0600
-+++ gdb-5.3/gdb/gdbserver/utils.c 2003-08-20 08:48:15.000000000 -0600
-@@ -33,16 +33,13 @@
- perror_with_name (char *string)
- {
- #ifndef STDC_HEADERS
-- extern int sys_nerr;
-- extern char *sys_errlist[];
- extern int errno;
- #endif
- const char *err;
- char *combined;
-
-- if (errno < sys_nerr)
-- err = sys_errlist[errno];
-- else
-+ err = strerror (errno);
-+ if (err == NULL)
- err = "unknown error";
-
- combined = (char *) alloca (strlen (err) + strlen (string) + 3);
-diff -urN gdb-5.3/gdb/gdbserver.orig/linux-low.c.orig gdb-5.3/gdb/gdbserver/linux-low.c.orig
---- gdb-5.3/gdb/gdbserver.orig/linux-low.c 2003-08-20 08:40:27.000000000 -0600
-+++ gdb-5.3/gdb/gdbserver/linux-low.c 2003-08-20 08:44:54.000000000 -0600
-@@ -175,8 +175,7 @@
- if (ptrace (PTRACE_ATTACH, pid, 0, 0) != 0)
- {
- fprintf (stderr, "Cannot attach to process %d: %s (%d)\n", pid,
-- errno < sys_nerr ? sys_errlist[errno] : "unknown error",
-- errno);
-+ strerror (errno), errno);
- fflush (stderr);
-
- /* If we fail to attach to an LWP, just return. */
-
+++ /dev/null
-diff -urN genext2fs-1.3.orig/Makefile genext2fs-1.3/Makefile
---- genext2fs-1.3.orig/Makefile 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/Makefile 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,46 @@
-+CC=gcc
-+CFLAGS=-Wall -O0 -g
-+
-+SRC=genext2fs.c
-+OBJS=$(patsubst %.c,%.o, $(SRC))
-+
-+all: genext2fs
-+INSTALL=install
-+
-+genext2fs: $(OBJS)
-+ $(CC) $(CFLAGS) -o $@ $(OBJS) -o $@
-+
-+$(OBJS): %.o : %.c
-+ $(CC) $(CFLAGS) -c $< -o $@
-+
-+$(OBJS): Makefile
-+
-+install:
-+ $(INSTALL) -d $(DESTDIR)/usr/bin/
-+ $(INSTALL) -m 755 genext2fs $(DESTDIR)/usr/bin/
-+ $(INSTALL) -d $(DESTDIR)/usr/share/man/man8/
-+ $(INSTALL) -m 644 genext2fs.8 $(DESTDIR)/usr/share/man/man8/
-+
-+clean:
-+ rm -rf *.o *.a core genext2fs
-+ rm -rf test ext2.img
-+
-+check: all
-+ mkdir -p test
-+ dd if=/dev/zero of=test/zero count=1
-+ ./genext2fs -b 4096 -d test ext2.img
-+
-+ md5=`md5sum ext2.img | cut -f 1 -d " "`; \
-+ if [ "$$md5" != "89471302d95f96a76fbb2cff98182cde" ] ; then \
-+ echo "test failed."; \
-+ else \
-+ echo "test succeeded."; \
-+ fi
-+
-+# test genext2fs by creating the image and comparing checksums
-+test: all
-+ sh ./test.sh
-+
-+# test genext2fs by actually mounting the created image.
-+test-mount: all
-+ sudo sh ./test-mount.sh
-diff -urN genext2fs-1.3.orig/debian/changelog genext2fs-1.3/debian/changelog
---- genext2fs-1.3.orig/debian/changelog 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/changelog 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,17 @@
-+genext2fs (1.3-2) unstable; urgency=low
-+
-+ * apply fix from upstream cvs that appears to fix endian bug
-+ (closes: #122411)
-+ * mention filesystem size limit in manpage (closes: #122729)
-+ * mention that hard links are not supported in manpage
-+ (closes: #155464)
-+ * add sanity check at the end of the build
-+
-+ -- David Kimdon <dwhedon@debian.org> Fri, 8 Mar 2002 23:17:36 -0800
-+
-+genext2fs (1.3-1) unstable; urgency=low
-+
-+ * Initial Release. (closes: #105263)
-+
-+ -- David Kimdon <dwhedon@debian.org> Sat, 14 Jul 2001 13:24:49 -0700
-+
-diff -urN genext2fs-1.3.orig/debian/control genext2fs-1.3/debian/control
---- genext2fs-1.3.orig/debian/control 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/control 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,19 @@
-+Source: genext2fs
-+Section: admin
-+Priority: optional
-+Maintainer: David Kimdon <dwhedon@debian.org>
-+Build-Depends: debhelper (>> 3.0.0)
-+Standards-Version: 3.5.2
-+
-+Package: genext2fs
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Description: ext2 filesystem generator for embedded systems
-+ `genext2fs' is meant to generate an ext2 filesystem
-+ as a normal (non-root) user. It doesn't require you to mount
-+ the image file to copy files on it. It doesn't even require
-+ you to be the superuser to make device nodes.
-+ .
-+ Warning ! `genext2fs' has been designed for embedded
-+ systems. As such, it will generate a filesystem for single-user
-+ usage: all files/directories/etc... will belong to UID/GID 0
-diff -urN genext2fs-1.3.orig/debian/copyright genext2fs-1.3/debian/copyright
---- genext2fs-1.3.orig/debian/copyright 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/copyright 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,15 @@
-+This package was debianized by David Kimdon <dwhedon@debian.org> on
-+Sat, 14 Jul 2001 13:24:49 -0700.
-+
-+It was downloaded from http://freshmeat.net/projects/genext2fs/
-+Upstream Author(s): Xavier Bestel <xbestel@aplio.fr>
-+
-+Copyright (C) 2000 Xavier Bestel <xavier.bestel@free.fr>
-+
-+This program is free software; you can redistribute it and/or
-+modify it under the terms of the GNU General Public License
-+as published by the Free Software Foundation; version
-+2 of the License.
-+
-+On Debian systems, the complete text of the GNU General Public
-+License can be found in /usr/share/common-licenses/GPL file.
-diff -urN genext2fs-1.3.orig/debian/rules genext2fs-1.3/debian/rules
---- genext2fs-1.3.orig/debian/rules 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/rules 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,70 @@
-+#!/usr/bin/make -f
-+# Sample debian/rules that uses debhelper.
-+# GNU copyright 1997 to 1999 by Joey Hess.
-+
-+# Uncomment this to turn on verbose mode.
-+#export DH_VERBOSE=1
-+
-+# This is the debhelper compatability version to use.
-+export DH_COMPAT=2
-+
-+configure: configure-stamp
-+configure-stamp:
-+ dh_testdir
-+ # Add here commands to configure the package.
-+ # ./configure --prefix=/usr --mandir=/usr/share/man/
-+
-+ touch configure-stamp
-+
-+build: configure-stamp build-stamp
-+build-stamp:
-+ dh_testdir
-+
-+ # Add here commands to compile the package.
-+ $(MAKE)
-+ $(MAKE) check
-+
-+ touch build-stamp
-+
-+clean:
-+ dh_testdir
-+ dh_testroot
-+ rm -f build-stamp configure-stamp
-+
-+ # Add here commands to clean up after the build process.
-+ -$(MAKE) clean
-+
-+ dh_clean
-+
-+install: build
-+ dh_testdir
-+ dh_testroot
-+ dh_clean -k
-+ dh_installdirs
-+
-+ # Add here commands to install the package into debian/genext2fs.
-+ $(MAKE) install DESTDIR=`pwd`/debian/genext2fs
-+
-+
-+# Build architecture-independent files here.
-+binary-indep: build install
-+# We have nothing to do by default.
-+
-+# Build architecture-dependent files here.
-+binary-arch: build install
-+ dh_testdir
-+ dh_testroot
-+ dh_installdocs
-+ dh_installchangelogs
-+ dh_link
-+ dh_strip
-+ dh_compress
-+ dh_fixperms
-+ dh_installdeb
-+ dh_shlibdeps
-+ dh_gencontrol
-+ dh_md5sums
-+ dh_builddeb
-+
-+binary: binary-indep binary-arch
-+.PHONY: build clean binary-indep binary-arch binary install configure
-diff -urN genext2fs-1.3.orig/dev.txt genext2fs-1.3/dev.txt
---- genext2fs-1.3.orig/dev.txt 2000-09-28 09:03:19.000000000 -0600
-+++ genext2fs-1.3/dev.txt 1969-12-31 17:00:00.000000000 -0700
-@@ -1,94 +0,0 @@
--drwx /dev
--crw- 10,190 /dev/lcd
--crw- 10,191 /dev/splc781
--crw- 4,0 /dev/console
--crw- 5,64 /dev/cua0
--crw- 5,65 /dev/cua1
--crw- 5,66 /dev/cua2
--crw- 5,70 /dev/cua6
--crw- 5,71 /dev/cua7
--crw- 5,72 /dev/cua8
--crw- 5,73 /dev/cua9
--crw- 29,0 /dev/fb0
--crw- 29,32 /dev/fb1
--crw- 1,2 /dev/kmem
--crw- 1,1 /dev/mem
--crw- 1,3 /dev/null
--crw- 2,2 /dev/ptyp2
--crw- 2,3 /dev/ptyp3
--crw- 2,5 /dev/ptyp5
--crw- 2,4 /dev/ptyp4
--crw- 10,178 /dev/triokb
--crw- 2,0 /dev/ptyp0
--crw- 2,6 /dev/ptyp6
--crw- 2,7 /dev/ptyp7
--crw- 2,8 /dev/ptyp8
--crw- 2,9 /dev/ptyp9
--crw- 2,10 /dev/ptypa
--crw- 2,11 /dev/ptypb
--crw- 2,12 /dev/ptypc
--crw- 2,13 /dev/ptypd
--crw- 2,14 /dev/ptype
--crw- 2,15 /dev/ptypf
--brw- 1,0 /dev/ram0
--brw- 1,1 /dev/ram1
--brw- 1,2 /dev/ram2
--brw- 1,3 /dev/ram3
--br-- 31,0 /dev/rom0
--brw- 31,1 /dev/rom1
--brw- 31,2 /dev/rom2
--brw- 31,3 /dev/rom3
--crw- 5,0 /dev/tty
--crw- 4,0 /dev/tty0
--crwx 4,1 /dev/tty1
--crwx 4,2 /dev/tty2
--crwx 4,3 /dev/tty3
--crwx 4,4 /dev/tty4
--crw- 4,5 /dev/tty5
--crwx 4,6 /dev/tty6
--crw- 4,7 /dev/tty7
--crw- 4,8 /dev/tty8
--crw- 4,9 /dev/tty9
--crw- 4,64 /dev/ttyS0
--crw- 4,65 /dev/ttyS1
--crw- 4,66 /dev/ttyS2
--crw- 4,67 /dev/ttyS3
--crw- 4,68 /dev/ttyS4
--crw- 4,69 /dev/ttyS5
--crw- 4,70 /dev/ttyS6
--crw- 4,71 /dev/ttyS7
--crw- 4,72 /dev/ttyS8
--crw- 4,73 /dev/ttyS9
--crw- 3,0 /dev/ttyp0
--crw- 3,1 /dev/ttyp1
--crw- 3,2 /dev/ttyp2
--crw- 3,3 /dev/ttyp3
--crw- 3,4 /dev/ttyp4
--crw- 3,5 /dev/ttyp5
--crw- 3,6 /dev/ttyp6
--crw- 3,7 /dev/ttyp7
--crw- 3,8 /dev/ttyp8
--crw- 3,9 /dev/ttyp9
--crw- 3,10 /dev/ttypa
--crw- 3,11 /dev/ttypb
--crw- 3,12 /dev/ttypc
--crw- 3,13 /dev/ttypd
--crw- 3,14 /dev/ttype
--crw- 3,15 /dev/ttypf
--crw- 1,5 /dev/zero
--crwx 10,111 /dev/dtedrv
--crwx 4,110 /dev/ttyM
--crw- 77,1 /dev/tssnd
--crw- 77,2 /dev/tstone
--crw- 2,1 /dev/ptyp1
--crwx 10,180 /dev/triohook
--crw- 90,0 /dev/mtd0
--brw- 44,0 /dev/ftl0
--crw- 10,175 /dev/tporta
--crw- 10,176 /dev/tportb
--crwx 10,100 /dev/softmodem
--crwx 10,101 /dev/softmodem_signals
--crwx 10,181 /dev/triovoice
--crw- 5,67 /dev/cua3
--crw- 5,68 /dev/cua4
--crw- 5,69 /dev/cua5
-diff -urN genext2fs-1.3.orig/device_table.txt genext2fs-1.3/device_table.txt
---- genext2fs-1.3.orig/device_table.txt 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/device_table.txt 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,129 @@
-+# When building a target filesystem, it is desirable to not have to
-+# become root and then run 'mknod' a thousand times. Using a device
-+# table you can create device nodes and directories "on the fly".
-+#
-+# This is a sample device table file for use with genext2fs. You can
-+# do all sorts of interesting things with a device table file. For
-+# example, if you want to adjust the permissions on a particular file
-+# you can just add an entry like:
-+# /sbin/foobar f 2755 0 0 - - - - -
-+# and (assuming the file /sbin/foobar exists) it will be made setuid
-+# root (regardless of what its permissions are on the host filesystem.
-+# Furthermore, you can use a single table entry to create a many device
-+# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-+# I could just use the following two table entries:
-+# /dev/hda b 640 0 0 3 0 0 0 -
-+# /dev/hda b 640 0 0 3 1 1 1 15
-+#
-+# Device table entries take the form of:
-+# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+# where name is the file name, type can be one of:
-+# f A regular file
-+# d Directory
-+# c Character special device file
-+# b Block special device file
-+# p Fifo (named pipe)
-+# uid is the user id for the target file, gid is the group id for the
-+# target file. The rest of the entries (major, minor, etc) apply only
-+# to device special files.
-+
-+# Have fun
-+# -Erik Andersen <andersen@codepoet.org>
-+#
-+
-+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+/dev d 755 0 0 - - - - -
-+/dev/mem c 640 0 0 1 1 0 0 -
-+/dev/kmem c 640 0 0 1 2 0 0 -
-+/dev/null c 640 0 0 1 3 0 0 -
-+/dev/zero c 640 0 0 1 5 0 0 -
-+/dev/random c 640 0 0 1 8 0 0 -
-+/dev/urandom c 640 0 0 1 9 0 0 -
-+/dev/tty c 666 0 0 5 0 0 0 -
-+/dev/tty c 666 0 0 4 0 0 1 6
-+/dev/console c 640 0 0 5 1 0 0 -
-+/dev/ram b 640 0 0 1 1 0 0 -
-+/dev/ram b 640 0 0 1 0 0 1 4
-+/dev/loop b 640 0 0 7 0 0 1 2
-+/dev/ptmx c 666 0 0 5 2 0 0 -
-+#/dev/ttyS c 640 0 0 4 64 0 1 4
-+#/dev/psaux c 640 0 0 10 1 0 0 -
-+#/dev/rtc c 640 0 0 10 135 0 0 -
-+
-+# Adjust permissions on some normal files
-+#/etc/shadow f 600 0 0 - - - - -
-+#/bin/tinylogin f 4755 0 0 - - - - -
-+
-+# User-mode Linux stuff
-+/dev/ubda b 640 0 0 98 0 0 0 -
-+/dev/ubda b 640 0 0 98 1 1 1 15
-+
-+# IDE Devices
-+/dev/hda b 640 0 0 3 0 0 0 -
-+/dev/hda b 640 0 0 3 1 1 1 15
-+/dev/hdb b 640 0 0 3 64 0 0 -
-+/dev/hdb b 640 0 0 3 65 1 1 15
-+#/dev/hdc b 640 0 0 22 0 0 0 -
-+#/dev/hdc b 640 0 0 22 1 1 1 15
-+#/dev/hdd b 640 0 0 22 64 0 0 -
-+#/dev/hdd b 640 0 0 22 65 1 1 15
-+#/dev/hde b 640 0 0 33 0 0 0 -
-+#/dev/hde b 640 0 0 33 1 1 1 15
-+#/dev/hdf b 640 0 0 33 64 0 0 -
-+#/dev/hdf b 640 0 0 33 65 1 1 15
-+#/dev/hdg b 640 0 0 34 0 0 0 -
-+#/dev/hdg b 640 0 0 34 1 1 1 15
-+#/dev/hdh b 640 0 0 34 64 0 0 -
-+#/dev/hdh b 640 0 0 34 65 1 1 15
-+
-+# SCSI Devices
-+#/dev/sda b 640 0 0 8 0 0 0 -
-+#/dev/sda b 640 0 0 8 1 1 1 15
-+#/dev/sdb b 640 0 0 8 16 0 0 -
-+#/dev/sdb b 640 0 0 8 17 1 1 15
-+#/dev/sdc b 640 0 0 8 32 0 0 -
-+#/dev/sdc b 640 0 0 8 33 1 1 15
-+#/dev/sdd b 640 0 0 8 48 0 0 -
-+#/dev/sdd b 640 0 0 8 49 1 1 15
-+#/dev/sde b 640 0 0 8 64 0 0 -
-+#/dev/sde b 640 0 0 8 65 1 1 15
-+#/dev/sdf b 640 0 0 8 80 0 0 -
-+#/dev/sdf b 640 0 0 8 81 1 1 15
-+#/dev/sdg b 640 0 0 8 96 0 0 -
-+#/dev/sdg b 640 0 0 8 97 1 1 15
-+#/dev/sdh b 640 0 0 8 112 0 0 -
-+#/dev/sdh b 640 0 0 8 113 1 1 15
-+#/dev/sg c 640 0 0 21 0 0 1 15
-+#/dev/scd b 640 0 0 11 0 0 1 15
-+#/dev/st c 640 0 0 9 0 0 1 8
-+#/dev/nst c 640 0 0 9 128 0 1 8
-+#/dev/st c 640 0 0 9 32 1 1 4
-+#/dev/st c 640 0 0 9 64 1 1 4
-+#/dev/st c 640 0 0 9 96 1 1 4
-+
-+# Floppy disk devices
-+#/dev/fd b 640 0 0 2 0 0 1 2
-+#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-+#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-+#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-+#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-+#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-+#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-+#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-+#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-+
-+# All the proprietary cdrom devices in the world
-+#/dev/aztcd b 640 0 0 29 0 0 0 -
-+#/dev/bpcd b 640 0 0 41 0 0 0 -
-+#/dev/capi20 c 640 0 0 68 0 0 1 2
-+#/dev/cdu31a b 640 0 0 15 0 0 0 -
-+#/dev/cdu535 b 640 0 0 24 0 0 0 -
-+#/dev/cm206cd b 640 0 0 32 0 0 0 -
-+#/dev/sjcd b 640 0 0 18 0 0 0 -
-+#/dev/sonycd b 640 0 0 15 0 0 0 -
-+#/dev/gscd b 640 0 0 16 0 0 0 -
-+#/dev/sbpcd b 640 0 0 25 0 0 0 -
-+#/dev/sbpcd b 640 0 0 25 0 0 1 4
-+#/dev/mcd b 640 0 0 23 0 0 0 -
-+#/dev/optcd b 640 0 0 17 0 0 0 -
-+
-diff -urN genext2fs-1.3.orig/genext2fs.8 genext2fs-1.3/genext2fs.8
---- genext2fs-1.3.orig/genext2fs.8 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/genext2fs.8 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,125 @@
-+.\" Hey, EMACS: -*- nroff -*-
-+.\" First parameter, NAME, should be all caps
-+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
-+.\" other parameters are allowed: see man(7), man(1)
-+.TH GENEXT2FS 8 "July 14, 2001"
-+.\" Please adjust this date whenever revising the manpage.
-+.\"
-+.\" Some roff macros, for reference:
-+.\" .nh disable hyphenation
-+.\" .hy enable hyphenation
-+.\" .ad l left justify
-+.\" .ad b justify to both left and right margins
-+.\" .nf disable filling
-+.\" .fi enable filling
-+.\" .br insert line break
-+.\" .sp <n> insert n+1 empty lines
-+.\" for manpage-specific macros, see man(7)
-+.SH NAME
-+genext2fs \- ext2 filesystem generator for embedded systems
-+.SH SYNOPSIS
-+.B genext2fs
-+.RI [ options ] " image"
-+.SH DESCRIPTION
-+\fBgenext2fs\fP generates an ext2 filesystem
-+as a normal (non-root) user. It doesn't require you to mount
-+the image file to copy files on it. It doesn't even require
-+you to be the superuser to make device nodes.
-+.SH OPTIONS
-+.TP
-+.BI -x \ image
-+Use this image as a starting point
-+.TP
-+.BI -d \ directory
-+Add this directory as source
-+.TP
-+.BI -f \ FILE
-+.TP
-+.BI -D \ FILE
-+Uses the named FILE as a device table file, to create device
-+nodes and directories "on the fly".
-+.TP
-+.BI -b \ blocks
-+Size in blocks
-+.TP
-+.BI -i \ inodes
-+Number of inodes
-+.TP
-+.BI -r \ reserved
-+Number of reserved blocks
-+.TP
-+.BI -g \ path
-+Generate a block map file for this path
-+.TP
-+.BI -e \ value
-+Fill unallocated blocks with value
-+.TP
-+.BI -z
-+Make files with holes
-+.TP
-+.BI -U
-+Squash owners making all files be owned by root
-+.TP
-+.BI -P
-+Squash permissions on all files
-+.TP
-+.BI -q
-+Squash permissions and owners (same as -P -U)
-+.TP
-+.BI -v
-+Print resulting filesystem structure
-+.TP
-+.BI -h
-+Display help
-+.TP
-+.SH EXAMPLES
-+
-+.EX
-+.B
-+ genext2fs -b 1440 -d src /dev/fd0
-+.EE
-+
-+All files in the
-+.I src
-+directory will be written to
-+.B /dev/fd0
-+as a new ext2 filesystem image. You can then mount the floppy as
-+usual.
-+
-+.EX
-+.B
-+ genext2fs -b 1024 -d src -D device_table.txt flashdisk.img
-+.EE
-+
-+This example builds a filesystem from all the files in
-+.I src
-+, then device nodes are created based on the content the device_table file
-+.I dev.txt.
-+An example device file follows:
-+
-+.EX
-+ #<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+ /dev d 755 0 0 - - - - -
-+ /dev/mem c 640 0 0 1 1 0 0 -
-+ /dev/tty c 666 0 0 5 0 0 0 -
-+ /dev/tty c 666 0 0 4 0 0 1 6
-+ /dev/loop b 640 0 0 7 0 0 1 2
-+ /dev/hda b 640 0 0 3 0 0 0 -
-+ /dev/hda b 640 0 0 3 1 1 1 16
-+.EE
-+
-+This device table creates the /dev directory, a character device
-+node /dev/mem (major 1, minor 1), it also creates /dev/tty,
-+/dev/tty[0-5], /dev/loop[0-1], /dev/hda, and /dev/hda0 to /dev/hda15
-+.SH BUGS
-+\fBgenext2fs\fP does not support hard links. Hard links present in the input
-+tree will be represented as separate files in the ext2 image.
-+
-+.SH SEE ALSO
-+.BR mkfs (8),
-+.BR genromfs (8),
-+.BR mkisofs (8).
-+.br
-+.SH AUTHOR
-+This manual page was written by David Kimdon <dwhedon@debian.org>,
-+for the Debian GNU/Linux system (but may be used by others).
-diff -urN genext2fs-1.3.orig/genext2fs.c genext2fs-1.3/genext2fs.c
---- genext2fs-1.3.orig/genext2fs.c 2001-06-18 02:11:32.000000000 -0600
-+++ genext2fs-1.3/genext2fs.c 2003-04-21 01:48:35.000000000 -0600
-@@ -1,3 +1,4 @@
-+/* vi: set sw=8 ts=8: */
- // genext2fs.c
- //
- // ext2 filesystem generator for embedded systems
-@@ -26,6 +27,22 @@
- // Bugfix: getcwd values for Solaris xavier.gueguen@col.bsf.alcatel.fr
- // Bugfix: ANSI scanf for non-GNU C xavier.gueguen@col.bsf.alcatel.fr
- // 28 Jun 2001 Bugfix: getcwd differs for Solaris/GNU mike@sowbug.com
-+// 23 Mar 2002 Bugfix: test for IFCHR or IFBLK was flawed
-+// 10 Oct 2002 Added comments,makefile targets, vsundar@ixiacom.com
-+// endianess swap assert check.
-+// Copyright (C) 2002 Ixia communications
-+// 12 Oct 2002 Added support for triple indirection vsundar@ixiacom.com
-+// Copyright (C) 2002 Ixia communications
-+// 14 Oct 2002 Added support for groups vsundar@ixiacom.com
-+// Copyright (C) 2002 Ixia communications
-+// 5 Jan 2003 Bugfixes: reserved inodes should be set vsundar@usc.edu
-+// only in the first group; directory names
-+// need to be null padded at the end; and
-+// number of blocks per group should be a
-+// multiple of 8. Updated md5 values.
-+// 6 Jan 2003 Erik Andersen <andersee@debian.org> added
-+// mkfs.jffs2 compatible device table support,
-+// along with -q, -P, -U
-
-
- // `genext2fs' is a mean to generate an ext2 filesystem
-@@ -33,10 +50,6 @@
- // the image file to copy files on it. It doesn't even require
- // you to be the superuser to make device nodes.
- //
--// Warning ! `genext2fs' has been designed for embedded
--// systems. As such, it will generate a filesystem for single-user
--// usage: all files/directories/etc... will belong to UID/GID 0
--//
- // Example usage:
- //
- // # genext2fs -b 1440 -d srcdir /dev/fd0
-@@ -45,21 +58,15 @@
- // a new ext2 filesystem image. You can then mount the floppy as
- // usual.
- //
--// # genext2fs -b 1024 -d builddir -f devices.txt flashdisk.img
-+// # genext2fs -b 1024 -d builddir -D device_table.txt flashdisk.img
- //
- // This one would build a filesystem from all the files in builddir,
--// then would read a devices list and make apropriate nodes. The
--// format for the device list is:
--//
--// drwx /dev
--// crw- 10,190 /dev/lcd
--// brw- 1,0 /dev/ram0
--//
--// This device list builds the /dev directory, a character device
--// node /dev/lcd (major 10, minor 190) and a block device node
--// /dev/ram0 (major 1, minor 0)
-+// then would read the device_table.txt file and make apropriate nodes.
-+// The format for the device table file is covered in detail in the sample
-+// device_table.txt file provided with the genext2fs source.
-
-
-+#define _GNU_SOURCE
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-@@ -67,6 +74,11 @@
- #include <stdarg.h>
- #include <unistd.h>
- #include <sys/stat.h>
-+#include <assert.h>
-+#include <time.h>
-+#include <ctype.h>
-+#include <errno.h>
-+#include <fcntl.h>
-
-
-
-@@ -76,10 +88,14 @@
- #define BLOCKSIZE 1024
- #define BLOCKS_PER_GROUP 8192
- #define BYTES_PER_INODE (8*BLOCKSIZE)
-+/* Percentage of blocks that are reserved.*/
- #define RESERVED_INODES 5/100
-
-
- // inode block size (why is it != BLOCKSIZE ?!?)
-+/* The field i_blocks in the ext2 inode stores the number of data blocks
-+ but in terms of 512 bytes. That is what INODE_BLOCKSIZE represents.
-+ INOBLK is the number of such blocks in an actual disk block */
-
- #define INODE_BLOCKSIZE 512
- #define INOBLK (BLOCKSIZE / INODE_BLOCKSIZE)
-@@ -147,6 +163,39 @@
-
- #define OP_HOLES 0x01 // make files with holes
-
-+/* Defines for accessing group details */
-+
-+// Number of groups in the filesystem
-+#define GRP_NBGROUPS(fs) ( ((fs)->sb.s_blocks_count-1)/(fs)->sb.s_blocks_per_group )
-+
-+// Get group block bitmap (bbm) given the group number
-+#define GRP_GET_GROUP_BBM(fs,grp) ( get_blk((fs),(fs)->gd[(grp)].bg_block_bitmap) )
-+
-+// Get group inode bitmap (ibm) given the group number
-+#define GRP_GET_GROUP_IBM(fs,grp) ( get_blk((fs),(fs)->gd[(grp)].bg_inode_bitmap) )
-+
-+// Given an inode number find the group it belongs to
-+#define GRP_GROUP_OF_INODE(fs,nod) ( ((nod)-1) / (fs)->sb.s_inodes_per_group)
-+
-+//Given an inode number get the inode bitmap that covers it
-+#define GRP_GET_INODE_BITMAP(fs,nod) \
-+ ( GRP_GET_GROUP_IBM((fs),GRP_GROUP_OF_INODE((fs),(nod))) )
-+
-+//Given an inode number find its offset within the inode bitmap that covers it
-+#define GRP_IBM_OFFSET(fs,nod) \
-+ ( (nod) - GRP_GROUP_OF_INODE((fs),(nod))*(fs)->sb.s_inodes_per_group )
-+
-+// Given a block number find the group it belongs to
-+#define GRP_GROUP_OF_BLOCK(fs,blk) ( ((blk)-1) / (fs)->sb.s_blocks_per_group)
-+
-+//Given a block number get the block bitmap that covers it
-+#define GRP_GET_BLOCK_BITMAP(fs,blk) \
-+ ( GRP_GET_GROUP_BBM((fs),GRP_GROUP_OF_BLOCK((fs),(blk))) )
-+
-+//Given a block number find its offset within the block bitmap that covers it
-+#define GRP_BBM_OFFSET(fs,blk) \
-+ ( (blk) - GRP_GROUP_OF_BLOCK((fs),(blk))*(fs)->sb.s_blocks_per_group )
-+
-
- // used types
-
-@@ -287,7 +336,6 @@
- {
- groupdescriptor_decl
- uint32 bg_reserved[3];
-- uint32 bg_pad_to_bk[(BLOCKSIZE-32)/sizeof(uint32)];
- } groupdescriptor;
-
- typedef struct
-@@ -304,6 +352,32 @@
-
- typedef uint8 block[BLOCKSIZE];
-
-+/* blockwalker fields:
-+ The blockwalker is used to access all the blocks of a file (including
-+ the indirection blocks) through repeated calls to walk_bw.
-+
-+ bpdir -> index into the inode->i_block[]. Indicates level of indirection.
-+ bnum -> total number of blocks so far accessed. including indirection
-+ blocks.
-+ bpind,bpdind,bptind -> index into indirection blocks.
-+
-+ bpind, bpdind, bptind do *NOT* index into single, double and triple
-+ indirect blocks resp. as you might expect from their names. Instead
-+ they are in order the 1st, 2nd & 3rd index to be used
-+
-+ As an example..
-+ To access data block number 70000:
-+ bpdir: 15 (we are doing triple indirection)
-+ bpind: 0 ( index into the triple indirection block)
-+ bpdind: 16 ( index into the double indirection block)
-+ bptind: 99 ( index into the single indirection block)
-+ 70000 = 12 + 256 + 256*256 + 16*256 + 100 (indexing starts from zero)
-+
-+ So,for double indirection bpind will index into the double indirection
-+ block and bpdind into the single indirection block. For single indirection
-+ only bpind will be used.
-+*/
-+
- typedef struct
- {
- uint32 bnum;
-@@ -313,15 +387,14 @@
- uint32 bptind;
- } blockwalker;
-
-+
-+/* Filesystem structure that support groups */
- #if BLOCKSIZE == 1024
- typedef struct
- {
- block zero; // The famous block 0
- superblock sb; // The superblock
-- groupdescriptor gd; // The group desciptor
-- block bbm; // The block bitmap
-- block ibm; // The inode bitmap
-- inode itab[0]; // The inode table
-+ groupdescriptor gd[0]; // The group descriptors
- } filesystem;
- #else
- #error UNHANDLED BLOCKSIZE
-@@ -389,25 +462,113 @@
- #undef udecl32
- #undef utdecl32
-
--char * argv0;
-+static char * app_name;
-+static int squash_uids = 0;
-+static int squash_perms = 0;
-+static const char *const memory_exhausted = "memory exhausted";
-
- // error (un)handling
--inline void errexit(const char *fmt, ...)
-+static void verror_msg(const char *s, va_list p)
- {
-- va_list ap;
-- fprintf(stderr, "%s: ", argv0);
-- va_start(ap, fmt);
-- vfprintf(stderr, fmt, ap);
-- va_end(ap);
-- fprintf(stderr, "\n");
-- exit(1);
-+ fflush(stdout);
-+ fprintf(stderr, "%s: ", app_name);
-+ vfprintf(stderr, s, p);
-+}
-+static void error_msg(const char *s, ...)
-+{
-+ va_list p;
-+ va_start(p, s);
-+ verror_msg(s, p);
-+ va_end(p);
-+ putc('\n', stderr);
-+}
-+
-+static void error_msg_and_die(const char *s, ...)
-+{
-+ va_list p;
-+ va_start(p, s);
-+ verror_msg(s, p);
-+ va_end(p);
-+ putc('\n', stderr);
-+ exit(EXIT_FAILURE);
-+}
-+
-+static void vperror_msg(const char *s, va_list p)
-+{
-+ int err = errno;
-+ if (s == 0)
-+ s = "";
-+ verror_msg(s, p);
-+ if (*s)
-+ s = ": ";
-+ fprintf(stderr, "%s%s\n", s, strerror(err));
-+}
-+
-+#if 0
-+static void perror_msg(const char *s, ...)
-+{
-+ va_list p;
-+ va_start(p, s);
-+ vperror_msg(s, p);
-+ va_end(p);
-+}
-+#endif
-+static void perror_msg_and_die(const char *s, ...)
-+{
-+ va_list p;
-+ va_start(p, s);
-+ vperror_msg(s, p);
-+ va_end(p);
-+ exit(EXIT_FAILURE);
- }
-
--inline void pexit(const char * fname)
-+static FILE *xfopen(const char *path, const char *mode)
- {
-- fprintf(stderr, "%s: ", argv0);
-- perror(fname);
-- exit(1);
-+ FILE *fp;
-+ if ((fp = fopen(path, mode)) == NULL)
-+ perror_msg_and_die("%s", path);
-+ return fp;
-+}
-+
-+static char *xstrdup(const char *s)
-+{
-+ char *t;
-+
-+ if (s == NULL)
-+ return NULL;
-+ t = strdup(s);
-+ if (t == NULL)
-+ error_msg_and_die(memory_exhausted);
-+ return t;
-+}
-+
-+extern void *xrealloc(void *ptr, size_t size)
-+{
-+ ptr = realloc(ptr, size);
-+ if (ptr == NULL && size != 0)
-+ error_msg_and_die(memory_exhausted);
-+ return ptr;
-+}
-+
-+static char *xreadlink(const char *path)
-+{
-+ static const int GROWBY = 80; /* how large we will grow strings by */
-+
-+ char *buf = NULL;
-+ int bufsize = 0, readsize = 0;
-+
-+ do {
-+ buf = xrealloc(buf, bufsize += GROWBY);
-+ readsize = readlink(path, buf, bufsize); /* 1st try */
-+ if (readsize == -1) {
-+ perror_msg_and_die("%s:%s", app_name, path);
-+ }
-+ }
-+ while (bufsize < readsize + 1);
-+
-+ buf[readsize] = '\0';
-+
-+ return buf;
- }
-
- // printf helper macro
-@@ -423,7 +584,7 @@
- {
- }
-
--// rounds a quantity up to a blocksize
-+/* Rounds qty upto a multiple of siz. siz should be a power of 2 */
- uint32 rndup(uint32 qty, uint32 siz)
- {
- return (qty + (siz - 1)) & ~(siz - 1);
-@@ -444,7 +605,13 @@
- // return a given inode from a filesystem
- inline inode * get_nod(filesystem *fs, uint32 nod)
- {
-- return &fs->itab[nod-1];
-+ int grp,offset;
-+ inode *itab;
-+
-+ offset = GRP_IBM_OFFSET(fs,nod);
-+ grp = GRP_GROUP_OF_INODE(fs,nod);
-+ itab = (inode *)get_blk(fs, fs->gd[grp].bg_inode_table);
-+ return itab+offset-1;
- }
-
- // allocate a given block/inode in the bitmap
-@@ -479,29 +646,57 @@
- }
-
- // allocate a block
--uint32 alloc_blk(filesystem *fs)
-+uint32 alloc_blk(filesystem *fs, uint32 nod)
- {
-- uint32 bk;
-- if(!(bk = allocate(fs->bbm, 0)))
-- errexit("couldn't allocate a block (no free space)");
-- if(!(fs->gd.bg_free_blocks_count--))
-- errexit("group descr. free blocks count == 0 (corrupted fs?)");
-+ uint32 bk=0;
-+ uint32 grp,nbgroups;
-+
-+ grp = nod/fs->sb.s_inodes_per_group;
-+ nbgroups = ( fs->sb.s_blocks_count - fs->sb.s_first_data_block + fs->sb.s_blocks_per_group -1 ) /
-+ fs->sb.s_blocks_per_group;
-+ if(!(bk = allocate(get_blk(fs,fs->gd[grp].bg_block_bitmap), 0))) {
-+ for(grp=0;grp<nbgroups && !bk;grp++)
-+ bk=allocate(get_blk(fs,fs->gd[grp].bg_block_bitmap),0);
-+ grp--;
-+ }
-+ if (!bk)
-+ error_msg_and_die("couldn't allocate a block (no free space)");
-+ if(!(fs->gd[grp].bg_free_blocks_count--))
-+ error_msg_and_die("group descr %d. free blocks count == 0 (corrupted fs?)",grp);
- if(!(fs->sb.s_free_blocks_count--))
-- errexit("superblock free blocks count == 0 (corrupted fs?)");
-- return bk;
-+ error_msg_and_die("superblock free blocks count == 0 (corrupted fs?)");
-+ return fs->sb.s_blocks_per_group*grp + bk;
- }
-
- // allocate an inode
- uint32 alloc_nod(filesystem *fs)
- {
-- uint32 nod;
-- if(!(nod = allocate(fs->ibm, 0)))
-- errexit("couldn't allocate an inode (no free inode)");
-- if(!(fs->gd.bg_free_inodes_count--))
-- errexit("group descr. free blocks count == 0 (corrupted fs?)");
-+ uint32 nod=0,best_group=0;
-+ uint32 grp,nbgroups,avefreei;
-+
-+ nbgroups = ( fs->sb.s_blocks_count - fs->sb.s_first_data_block + fs->sb.s_blocks_per_group -1 ) /
-+ fs->sb.s_blocks_per_group;
-+
-+ /* Distribute inodes amongst all the blocks */
-+ /* For every block group with more than average number of free inodes */
-+ /* find the one with the most free blocks and allocate node there */
-+ /* Idea from find_group_dir in fs/ext2/ialloc.c in 2.4.19 kernel */
-+ /* We do it for all inodes. */
-+ avefreei = fs->sb.s_free_inodes_count / nbgroups;
-+ for(grp=0;grp<nbgroups && !nod;grp++) {
-+ if (fs->gd[grp].bg_free_inodes_count < avefreei)
-+ continue;
-+ if (!best_group ||
-+ fs->gd[grp].bg_free_blocks_count > fs->gd[best_group].bg_free_blocks_count)
-+ best_group = grp;
-+ }
-+ if (!(nod = allocate(get_blk(fs,fs->gd[best_group].bg_inode_bitmap),0)))
-+ error_msg_and_die("couldn't allocate an inode (no free inode)");
-+ if(!(fs->gd[best_group].bg_free_inodes_count--))
-+ error_msg_and_die("group descr. free blocks count == 0 (corrupted fs?)");
- if(!(fs->sb.s_free_inodes_count--))
-- errexit("superblock free blocks count == 0 (corrupted fs?)");
-- return nod;
-+ error_msg_and_die("superblock free blocks count == 0 (corrupted fs?)");
-+ return fs->sb.s_inodes_per_group*best_group+nod;
- }
-
- // print a bitmap allocation
-@@ -546,14 +741,14 @@
- {
- bkref = &get_nod(fs, nod)->i_block[bw->bpdir = 0];
- if(extend) // allocate first block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
- // direct block
- else if(bw->bpdir < EXT2_NDIR_BLOCKS)
- {
- bkref = &get_nod(fs, nod)->i_block[++bw->bpdir];
- if(extend) // allocate block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
- // first block in indirect block
- else if(bw->bpdir == EXT2_NDIR_BLOCKS)
-@@ -562,11 +757,11 @@
- bw->bpdir = EXT2_IND_BLOCK;
- bw->bpind = 0;
- if(extend) // allocate indirect block
-- get_nod(fs, nod)->i_block[bw->bpdir] = alloc_blk(fs);
-+ get_nod(fs, nod)->i_block[bw->bpdir] = alloc_blk(fs,nod);
- b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
- bkref = &b[bw->bpind];
- if(extend) // allocate first block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
- // block in indirect block
- else if((bw->bpdir == EXT2_IND_BLOCK) && (bw->bpind < BLOCKSIZE/4 - 1))
-@@ -575,7 +770,7 @@
- b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
- bkref = &b[bw->bpind];
- if(extend) // allocate block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
- // first block in first indirect block in first double indirect block
- else if(bw->bpdir == EXT2_IND_BLOCK)
-@@ -585,14 +780,14 @@
- bw->bpind = 0;
- bw->bpdind = 0;
- if(extend) // allocate double indirect block
-- get_nod(fs, nod)->i_block[bw->bpdir] = alloc_blk(fs);
-+ get_nod(fs, nod)->i_block[bw->bpdir] = alloc_blk(fs,nod);
- b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
- if(extend) // allocate first indirect block
-- b[bw->bpind] = alloc_blk(fs);
-+ b[bw->bpind] = alloc_blk(fs,nod);
- b = (uint32*)get_blk(fs, b[bw->bpind]);
- bkref = &b[bw->bpdind];
- if(extend) // allocate first block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
- // block in indirect block in double indirect block
- else if((bw->bpdir == EXT2_DIND_BLOCK) && (bw->bpdind < BLOCKSIZE/4 - 1))
-@@ -602,7 +797,7 @@
- b = (uint32*)get_blk(fs, b[bw->bpind]);
- bkref = &b[bw->bpdind];
- if(extend) // allocate block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
- // first block in indirect block in double indirect block
- else if((bw->bpdir == EXT2_DIND_BLOCK) && (bw->bpind < BLOCKSIZE/4 - 1))
-@@ -612,20 +807,100 @@
- bw->bpind++;
- b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
- if(extend) // allocate indirect block
-- b[bw->bpind] = alloc_blk(fs);
-+ b[bw->bpind] = alloc_blk(fs,nod);
- b = (uint32*)get_blk(fs, b[bw->bpind]);
- bkref = &b[bw->bpdind];
- if(extend) // allocate first block
-- *bkref = hole ? 0 : alloc_blk(fs);
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
-+ }
-+
-+ /* Adding support for triple indirection */
-+ /* Just starting triple indirection. Allocate the indirection
-+ blocks and the first data block
-+ */
-+ else if (bw->bpdir == EXT2_DIND_BLOCK)
-+ {
-+ bw->bnum += 3;
-+ bw->bpdir = EXT2_TIND_BLOCK;
-+ bw->bpind = 0;
-+ bw->bpdind = 0;
-+ bw->bptind = 0;
-+ if(extend) // allocate triple indirect block
-+ get_nod(fs, nod)->i_block[bw->bpdir] = alloc_blk(fs,nod);
-+ b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
-+ if(extend) // allocate first double indirect block
-+ b[bw->bpind] = alloc_blk(fs,nod);
-+ b = (uint32*)get_blk(fs, b[bw->bpind]);
-+ if(extend) // allocate first indirect block
-+ b[bw->bpdind] = alloc_blk(fs,nod);
-+ b = (uint32*)get_blk(fs, b[bw->bpdind]);
-+ bkref = &b[bw->bptind];
-+ if(extend) // allocate first data block
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
-+ }
-+ /* Still processing a single indirect block down the indirection
-+ chain.Allocate a data block for it
-+ */
-+ else if ( (bw->bpdir == EXT2_TIND_BLOCK) &&
-+ (bw->bptind < BLOCKSIZE/4 -1) )
-+ {
-+ bw->bptind++;
-+ b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
-+ b = (uint32*)get_blk(fs, b[bw->bpind]);
-+ b = (uint32*)get_blk(fs, b[bw->bpdind]);
-+ bkref = &b[bw->bptind];
-+ if(extend) // allocate data block
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
-+ }
-+ /* Finished processing a single indirect block. But still in the
-+ same double indirect block. Allocate new single indirect block
-+ for it and a data block
-+ */
-+ else if ( (bw->bpdir == EXT2_TIND_BLOCK) &&
-+ (bw->bpdind < BLOCKSIZE/4 -1) )
-+ {
-+ bw->bnum++;
-+ bw->bptind = 0;
-+ bw->bpdind++;
-+ b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
-+ b = (uint32*)get_blk(fs, b[bw->bpind]);
-+ if (extend) // allocate single indirect block
-+ b[bw->bpdind] = alloc_blk(fs,nod);
-+ b = (uint32*)get_blk(fs, b[bw->bpdind]);
-+ bkref = &b[bw->bptind];
-+ if(extend) // allocate first data block
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
-+ }
-+ /* Finished processing a double indirect block. Allocate the next
-+ double indirect block and the single,data blocks for it
-+ */
-+ else if ( (bw->bpdir == EXT2_TIND_BLOCK) &&
-+ (bw->bpind < BLOCKSIZE/4 - 1) )
-+ {
-+ bw->bnum += 2;
-+ bw->bpdind = 0;
-+ bw->bptind = 0;
-+ bw->bpind++;
-+ b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
-+ if(extend) // allocate double indirect block
-+ b[bw->bpind] = alloc_blk(fs,nod);
-+ b = (uint32*)get_blk(fs, b[bw->bpind]);
-+ if(extend) // allocate single indirect block
-+ b[bw->bpdind] = alloc_blk(fs,nod);
-+ b = (uint32*)get_blk(fs, b[bw->bpdind]);
-+ bkref = &b[bw->bptind];
-+ if(extend) // allocate first block
-+ *bkref = hole ? 0 : alloc_blk(fs,nod);
- }
-- // I don't do triple indirect - it's such a small filesystem ...
- else
-- errexit("file too big ! blocks list for inode %d extends past double indirect blocks!", nod);
-+ error_msg_and_die("file too big !");
-+ /* End change for walking triple indirection */
-+
- if(*bkref)
- {
- bw->bnum++;
-- if(!allocated(fs->bbm, *bkref))
-- errexit("[block %d of inode %d is unallocated !]", *bkref, nod);
-+ if(!allocated(GRP_GET_BLOCK_BITMAP(fs,*bkref), GRP_BBM_OFFSET(fs,*bkref)))
-+ error_msg_and_die("[block %d of inode %d is unallocated !]", *bkref, nod);
- }
- if(extend)
- get_nod(fs, nod)->i_blocks = bw->bnum * INOBLK;
-@@ -663,23 +938,40 @@
- }
-
- // link an entry (inode #) to a directory
--void add2dir(filesystem *fs, uint32 dnod, uint32 nod, const char* name)
-+void add2dir(filesystem *fs, uint32 dnod, uint32 nod, const char* name, uint32 mode, uid_t uid, gid_t gid, time_t ctime)
- {
- blockwalker bw;
- uint32 bk;
- uint8 *b;
- directory *d;
- int reclen, nlen;
-- if((get_nod(fs, dnod)->i_mode & FM_IFMT) != FM_IFDIR)
-- errexit("can't add '%s' to a non-directory", name);
-+ inode *node;
-+ inode *pnode;
-+
-+ /* Squash all permissions so files are owned by root
-+ * and file permissions have group/other perms removed */
-+ if (squash_uids) {
-+ uid = gid = 0;
-+ }
-+ if (squash_perms) {
-+ if (!S_ISLNK(mode)) {
-+ mode &= ~(S_IWGRP | S_IWOTH);
-+ mode &= ~(S_ISUID | S_ISGID);
-+ }
-+ }
-+
-+ pnode = get_nod(fs, dnod);
-+
-+ if(!S_ISDIR(pnode->i_mode))
-+ error_msg_and_die("can't add '%s' to a non-directory", name);
- if(!*name)
-- errexit("bad name '%s' (not meaningful)", name);
-+ error_msg_and_die("bad name '%s' (not meaningful)", name);
- if(strchr(name, '/'))
-- errexit("bad name '%s' (contains a slash)", name);
-+ error_msg_and_die("bad name '%s' (contains a slash)", name);
- nlen = strlen(name);
- reclen = sizeof(directory) + rndup(nlen, 4);
- if(reclen > BLOCKSIZE)
-- errexit("bad name '%s' (too long)", name);
-+ error_msg_and_die("bad name '%s' (too long)", name);
- init_bw(fs, dnod, &bw);
- while((bk = walk_bw(fs, dnod, &bw, 0, 0)) != WALK_END) // for all blocks in dir
- {
-@@ -691,9 +983,16 @@
- if((!d->d_inode) && (d->d_rec_len >= reclen))
- {
- d->d_inode = nod;
-- get_nod(fs, nod)->i_links_count++;
-+ node = get_nod(fs, nod);
-+ node->i_links_count++;
- d->d_name_len = nlen;
-- strncpy(d->d_name, name, nlen);
-+ strncpy(d->d_name, name, rndup(nlen,4));
-+ node->i_mode = mode;
-+ node->i_uid = uid;
-+ node->i_gid = gid;
-+ node->i_atime = ctime;
-+ node->i_ctime = ctime;
-+ node->i_mtime = ctime;
- return;
- }
- // if entry with enough room (last one?), shrink it & use it
-@@ -705,9 +1004,16 @@
- d = (directory*) (((int8*)d) + d->d_rec_len);
- d->d_rec_len = reclen;
- d->d_inode = nod;
-- get_nod(fs, nod)->i_links_count++;
-+ node = get_nod(fs, nod);
-+ node->i_links_count++;
- d->d_name_len = nlen;
-- strncpy(d->d_name, name, nlen);
-+ strncpy(d->d_name, name, rndup(nlen,4));
-+ node->i_mode = mode;
-+ node->i_uid = uid;
-+ node->i_gid = gid;
-+ node->i_atime = ctime;
-+ node->i_ctime = ctime;
-+ node->i_mtime = ctime;
- return;
- }
- }
-@@ -716,10 +1022,17 @@
- b = get_workblk();
- d = (directory*)b;
- d->d_inode = nod;
-- get_nod(fs, nod)->i_links_count++;
-+ node = get_nod(fs, nod);
-+ node->i_links_count++;
- d->d_rec_len = BLOCKSIZE;
- d->d_name_len = nlen;
-- strncpy(d->d_name, name, nlen);
-+ strncpy(d->d_name, name, rndup(nlen,4));
-+ node->i_mode = mode;
-+ node->i_uid = uid;
-+ node->i_gid = gid;
-+ node->i_atime = ctime;
-+ node->i_ctime = ctime;
-+ node->i_mtime = ctime;
- extend_blk(fs, dnod, b, 1);
- get_nod(fs, dnod)->i_size += BLOCKSIZE;
- free_workblk(b);
-@@ -747,7 +1060,7 @@
- // find the inode of a full path
- uint32 find_path(filesystem *fs, uint32 nod, const char * name)
- {
-- char *p, *n, *n2 = strdup(name);
-+ char *p, *n, *n2 = xstrdup(name);
- n = n2;
- while(*n == '/')
- {
-@@ -770,27 +1083,32 @@
- }
-
- // make a full-fledged directory (i.e. with "." & "..")
--uint32 mkdir_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode)
-+uint32 mkdir_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode,
-+ uid_t uid, gid_t gid, time_t ctime)
- {
- uint32 nod;
- if((nod = find_dir(fs, parent_nod, name)))
- return nod;
- nod = alloc_nod(fs);
-- get_nod(fs, nod)->i_mode = FM_IFDIR | mode;
-- add2dir(fs, parent_nod, nod, name);
-- add2dir(fs, nod, nod, ".");
-- add2dir(fs, nod, parent_nod, "..");
-- fs->gd.bg_used_dirs_count++;
-+ if (!(mode & FM_IFDIR))
-+ mode |= FM_IFDIR;
-+ add2dir(fs, parent_nod, nod, name, mode, uid, gid, ctime);
-+ add2dir(fs, nod, nod, ".", mode, uid, gid, ctime);
-+ add2dir(fs, nod, parent_nod, "..", mode, uid, gid, ctime);
-+ fs->gd[GRP_GROUP_OF_INODE(fs,nod)].bg_used_dirs_count++;
- return nod;
- }
-
- // make a symlink
--uint32 mklink_fs(filesystem *fs, uint32 parent_nod, const char *name, size_t size, uint8 * b)
-+uint32 mklink_fs(filesystem *fs, uint32 parent_nod, const char *name, size_t size,
-+ uint8 * b, uid_t uid, gid_t gid, time_t ctime)
- {
-+ uint32 mode;
- uint32 nod = alloc_nod(fs);
-+ mode = FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO;
- get_nod(fs, nod)->i_mode = FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO;
- get_nod(fs, nod)->i_size = size;
-- add2dir(fs, parent_nod, nod, name);
-+ add2dir(fs, parent_nod, nod, name, mode, uid, gid, ctime);
- if(size <= 4 * (EXT2_TIND_BLOCK+1))
- {
- strncpy((char*)get_nod(fs, nod)->i_block, (char*)b, size);
-@@ -801,15 +1119,15 @@
- }
-
- // make a file from a FILE*
--uint32 mkfile_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode, size_t size, FILE *f)
-+uint32 mkfile_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode, size_t size, FILE *f, uid_t uid, gid_t gid, time_t ctime)
- {
- uint8 * b;
- uint32 nod = alloc_nod(fs);
-- get_nod(fs, nod)->i_mode = FM_IFREG | mode;
-+ mode |= FM_IFREG;
- get_nod(fs, nod)->i_size = size;
-- add2dir(fs, parent_nod, nod, name);
-+ add2dir(fs, parent_nod, nod, name, mode, uid, gid, ctime);
- if(!(b = (uint8*)malloc(rndup(size, BLOCKSIZE))))
-- errexit("not enough mem to read file '%s'", name);
-+ error_msg_and_die("not enough mem to read file '%s'", name);
- memset(b, 0,rndup(size, BLOCKSIZE));
- if(f)
- fread(b, size, 1, f);
-@@ -824,6 +1142,15 @@
- uint32 get_mode(struct stat *st)
- {
- uint32 mode = 0;
-+
-+ /* Squash file permissions as needed */
-+ if (squash_perms) {
-+ if (!S_ISLNK(mode)) {
-+ st->st_mode &= ~(S_IWGRP | S_IWOTH);
-+ st->st_mode &= ~(S_ISUID | S_ISGID);
-+ }
-+ }
-+
- if(st->st_mode & S_IRUSR)
- mode |= FM_IRUSR | FM_IRGRP | FM_IROTH;
- if(st->st_mode & S_IWUSR)
-@@ -833,30 +1160,17 @@
- return mode;
- }
-
--// retrieves a mode info from a string
--uint32 get_modestr(const char *p)
--{
-- uint32 mode = 0;
-- if(p[0] == 'r')
-- mode |= FM_IRUSR | FM_IRGRP | FM_IROTH;
-- if(p[1] == 'w')
-- mode |= FM_IWUSR | FM_IWGRP | FM_IWOTH;
-- if(p[2] == 'x' || p[2] == 's')
-- mode |= FM_IXUSR | FM_IXGRP | FM_IXOTH;
-- return mode;
--}
--
- // basename of a path - free me
- char * basename(const char * fullpath)
- {
- char * p = strrchr(fullpath, '/');
-- return strdup(p ? p + 1 : fullpath);
-+ return xstrdup(p ? p + 1 : fullpath);
- }
-
- // dirname of a path - free me
- char * dirname(const char * fullpath)
- {
-- char * p, * n = strdup(fullpath);
-+ char * p, * n = xstrdup(fullpath);
- if((p = strrchr(n, '/')))
- *(p+1) = 0;
- else
-@@ -864,66 +1178,6 @@
- return n;
- }
-
--// adds entries to the filesystem from a text file
--void add2fs_from_file(filesystem *fs, uint32 this_nod, FILE * fh)
--{
-- uint32 mode;
-- uint32 nod, nod2;
-- char cmod[11], *path, *name, *dir;
-- int major, minor;
-- while(fscanf(fh, "%10s", cmod))
-- {
-- if(feof(fh))
-- break;
-- mode = get_modestr(cmod + 1);
-- switch(*cmod)
-- {
-- case 'd':
-- fscanf(fh, "%" SCANF_PREFIX "s\n", SCANF_STRING(path));
-- break;
-- case 'c':
-- mode |= FM_IFCHR;
-- fscanf(fh, "%i, %i %" SCANF_PREFIX "s\n", &major, &minor, SCANF_STRING(path));
-- break;
-- case 'b':
-- mode |= FM_IFBLK;
-- fscanf(fh, "%i, %i %" SCANF_PREFIX "s\n", &major, &minor, SCANF_STRING(path));
-- break;
-- case '#':
-- while(fgetc(fh) != '\n');
-- continue;
-- default:
-- errexit("malformed text input file");
-- }
-- name = basename(path);
-- dir = dirname(path);
-- free(path);
-- if(!(nod = find_path(fs, this_nod, dir)))
-- errexit("can't find directory '%s' to create '%s''", dir, name);
-- free(dir);
-- if((!strcmp(name, ".")) || (!strcmp(name, "..")))
-- {
-- free(name);
-- continue;
-- }
-- switch(*cmod)
-- {
-- case 'd':
-- mkdir_fs(fs, nod, name, mode);
-- break;
-- case 'c':
-- case 'b':
-- nod2 = alloc_nod(fs);
-- get_nod(fs, nod2)->i_mode = mode;
-- ((uint8*)get_nod(fs, nod2)->i_block)[0] = minor;
-- ((uint8*)get_nod(fs, nod2)->i_block)[1] = major;
-- add2dir(fs, nod, nod2, name);
-- break;
-- }
-- free(name);
-- }
--}
--
- // adds a tree of entries to the filesystem from current dir
- void add2fs_from_dir(filesystem *fs, uint32 this_nod)
- {
-@@ -934,7 +1188,7 @@
- struct stat st;
- uint8 *b;
- if(!(dh = opendir(".")))
-- pexit(".");
-+ perror_msg_and_die(".");
- while((dent = readdir(dh)))
- {
- if((!strcmp(dent->d_name, ".")) || (!strcmp(dent->d_name, "..")))
-@@ -948,31 +1202,27 @@
- get_nod(fs, nod)->i_mode = (((st.st_mode & S_IFMT) == S_IFCHR) ? FM_IFCHR : FM_IFBLK) | get_mode(&st);
- ((uint8*)get_nod(fs, nod)->i_block)[0] = (st.st_rdev & 0xff);
- ((uint8*)get_nod(fs, nod)->i_block)[1] = (st.st_rdev >> 8);
-- add2dir(fs, this_nod, nod, dent->d_name);
-+ add2dir(fs, this_nod, nod, dent->d_name, st.st_mode, st.st_uid, st.st_gid, st.st_ctime);
- break;
- case S_IFLNK:
-- if(!(b = (uint8*)malloc(rndup(st.st_size, BLOCKSIZE))))
-- errexit("out of memory");
-- if(readlink(dent->d_name, (char*)b, st.st_size) < 0)
-- pexit(dent->d_name);
-- mklink_fs(fs, this_nod, dent->d_name, st.st_size, b);
-+ b = xreadlink(dent->d_name);
-+ mklink_fs(fs, this_nod, dent->d_name, st.st_size, b, st.st_uid, st.st_gid, st.st_ctime);
- free(b);
- break;
- case S_IFREG:
-- if(!(fh = fopen(dent->d_name, "r")))
-- pexit(dent->d_name);
-- mkfile_fs(fs, this_nod, dent->d_name, get_mode(&st), st.st_size, fh);
-+ fh = xfopen(dent->d_name, "r");
-+ mkfile_fs(fs, this_nod, dent->d_name, st.st_mode, st.st_size, fh, st.st_uid, st.st_gid, st.st_ctime);
- fclose(fh);
- break;
- case S_IFDIR:
-- nod = mkdir_fs(fs, this_nod, dent->d_name, get_mode(&st));
-+ nod = mkdir_fs(fs, this_nod, dent->d_name, st.st_mode, st.st_uid, st.st_gid, st.st_ctime);
- if(chdir(dent->d_name) < 0)
-- pexit(dent->d_name);
-+ perror_msg_and_die(dent->d_name);
- add2fs_from_dir(fs, nod);
- chdir("..");
- break;
- default:
-- fprintf(stderr, "ignoring entry %s", dent->d_name);
-+ error_msg("ignoring entry %s", dent->d_name);
- }
- }
- closedir(dh);
-@@ -981,9 +1231,11 @@
- // endianness swap of x-indirect blocks
- void swap_goodblocks(filesystem *fs, inode *nod)
- {
-- int i;
-+ int i,j,done=0;
-+ uint32 *b,*b2;
-+
- int nblk = nod->i_blocks / INOBLK;
-- if((nod->i_size && !nblk) || (nod->i_mode & (FM_IFBLK | FM_IFCHR)))
-+ if((nod->i_size && !nblk) || ((nod->i_mode & FM_IFBLK) == FM_IFBLK) || ((nod->i_mode & FM_IFCHR) == FM_IFCHR))
- for(i = 0; i <= EXT2_TIND_BLOCK; i++)
- nod->i_block[i] = swab32(nod->i_block[i]);
- if(nblk <= EXT2_IND_BLOCK)
-@@ -991,20 +1243,55 @@
- swap_block(get_blk(fs, nod->i_block[EXT2_IND_BLOCK]));
- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4)
- return;
-+ /* Currently this will fail b'cos the number of blocks as stored
-+ in i_blocks also includes the indirection blocks (see
-+ walk_bw). But this function assumes that i_blocks only
-+ stores the count of data blocks ( Actually according to
-+ "Understanding the Linux Kernel" (Table 17-3 p502 1st Ed)
-+ i_blocks IS supposed to store the count of data blocks). so
-+ with a file of size 268K nblk would be 269.The above check
-+ will be false even though double indirection hasn't been
-+ started.This is benign as 0 means block 0 which has been
-+ zeroed out and therefore points back to itself from any offset
-+ */
-+ assert(nod->i_block[EXT2_DIND_BLOCK] != 0);
- for(i = 0; i < BLOCKSIZE/4; i++)
-+ /* Should this be...
-+ if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + (BLOCKSIZE/4)*i )
-+ */
- if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + i)
- swap_block(get_blk(fs, ((uint32*)get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]))[i]));
- swap_block(get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]));
- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4 + BLOCKSIZE/4 * BLOCKSIZE/4)
- return;
-- errexit("too big file on the filesystem");
-+ /* Adding support for triple indirection */
-+ b = (uint32*)get_blk(fs,nod->i_block[EXT2_TIND_BLOCK]);
-+ for(i=0;i < BLOCKSIZE/4 && !done ; i++) {
-+ b2 = (uint32*)get_blk(fs,b[i]);
-+ for(j=0; j<BLOCKSIZE/4;j++) {
-+ if (nblk > ( EXT2_IND_BLOCK + BLOCKSIZE/4 +
-+ (BLOCKSIZE/4)*(BLOCKSIZE/4) +
-+ i*(BLOCKSIZE/4)*(BLOCKSIZE/4) +
-+ j*(BLOCKSIZE/4)) )
-+ swap_block(get_blk(fs,b2[j]));
-+ else {
-+ done = 1;
-+ break;
-+ }
-+ }
-+ swap_block((uint8 *)b2);
-+ }
-+ swap_block((uint8 *)b);
-+ return;
- }
-
- void swap_badblocks(filesystem *fs, inode *nod)
- {
-- int i;
-+ int i,j,done=0;
-+ uint32 *b,*b2;
-+
- int nblk = nod->i_blocks / INOBLK;
-- if((nod->i_size && !nblk) || (nod->i_mode & (FM_IFBLK | FM_IFCHR)))
-+ if((nod->i_size && !nblk) || ((nod->i_mode & FM_IFBLK) == FM_IFBLK) || ((nod->i_mode & FM_IFCHR) == FM_IFCHR))
- for(i = 0; i <= EXT2_TIND_BLOCK; i++)
- nod->i_block[i] = swab32(nod->i_block[i]);
- if(nblk <= EXT2_IND_BLOCK)
-@@ -1012,13 +1299,34 @@
- swap_block(get_blk(fs, nod->i_block[EXT2_IND_BLOCK]));
- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4)
- return;
-+ /* See comment in swap_goodblocks */
-+ assert(nod->i_block[EXT2_DIND_BLOCK] != 0);
- swap_block(get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]));
- for(i = 0; i < BLOCKSIZE/4; i++)
-+ /* See comment in swap_goodblocks */
- if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + i)
- swap_block(get_blk(fs, ((uint32*)get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]))[i]));
- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4 + BLOCKSIZE/4 * BLOCKSIZE/4)
- return;
-- errexit("too big file on the filesystem");
-+ /* Adding support for triple indirection */
-+ b = (uint32*)get_blk(fs,nod->i_block[EXT2_TIND_BLOCK]);
-+ swap_block((uint8 *)b);
-+ for(i=0;i < BLOCKSIZE/4 && !done ; i++) {
-+ b2 = (uint32*)get_blk(fs,b[i]);
-+ swap_block((uint8 *)b2);
-+ for(j=0; j<BLOCKSIZE/4;j++) {
-+ if (nblk > ( EXT2_IND_BLOCK + BLOCKSIZE/4 +
-+ (BLOCKSIZE/4)*(BLOCKSIZE/4) +
-+ i*(BLOCKSIZE/4)*(BLOCKSIZE/4) +
-+ j*(BLOCKSIZE/4)) )
-+ swap_block(get_blk(fs,b2[j]));
-+ else {
-+ done = 1;
-+ break;
-+ }
-+ }
-+ }
-+ return;
- }
-
- // endianness swap of the whole filesystem
-@@ -1045,7 +1353,8 @@
- swap_goodblocks(fs, nod);
- swap_nod(nod);
- }
-- swap_gd(&fs->gd);
-+ for(i=0;i<GRP_NBGROUPS(fs);i++)
-+ swap_gd(&(fs->gd[i]));
- swap_sb(&fs->sb);
- }
-
-@@ -1053,7 +1362,8 @@
- {
- int i;
- swap_sb(&fs->sb);
-- swap_gd(&fs->gd);
-+ for(i=0;i<GRP_NBGROUPS(fs);i++)
-+ swap_gd(&(fs->gd[i]));
- for(i = 1; i < fs->sb.s_inodes_count; i++)
- {
- inode *nod = get_nod(fs, i);
-@@ -1084,53 +1394,118 @@
- directory *d;
- uint8 * b;
- uint32 nod;
-+ uint32 nbgroups,nbinodes_per_group,overhead_per_group,free_blocks,
-+ free_blocks_per_group,nbblocks_per_group;
-+ uint32 gd,itbl,ibmpos,bbmpos,itblpos;
-+ int j;
-+ uint8 *bbm,*ibm;
-+ inode *itab0;
-
- if(nbblocks < 16) // totally arbitrary
-- errexit("too small filesystem");
-- if(nbblocks >BLOCKS_PER_GROUP) // I build only one group
-- errexit("too big filesystem");
-+ error_msg_and_die("too small filesystem");
-+
-+ /* nbblocks is the total number of blocks in the system. First
-+ * calculate how much overhead blocks - inode table blocks,bitmap
-+ * blocks,group descriptor blocks etc. - are needed assuming each
-+ * group has BLOCKS_PER_GROUP blocks.Then recalculate nbblocks with
-+ * this figure. Each group has the same number of blocks. So the fs
-+ * has a size atleast the given value but usually rounded off to a i
-+ * higher number.
-+ */
-+ nbgroups = rndup(nbblocks,BLOCKS_PER_GROUP)/ BLOCKS_PER_GROUP;
-+ nbinodes_per_group = nbinodes/nbgroups +1;
-+ nbinodes_per_group = rndup(nbinodes_per_group, BLOCKSIZE/sizeof(inode));
-+ if (nbinodes_per_group < 16)
-+ nbinodes_per_group = 16; //minimum number b'cos the first 10 are reserved
-+ overhead_per_group = 3 /*super block,ibm,bbm*/
-+ + /* No. of blocks that the inodes occupy */
-+ nbinodes_per_group *sizeof(inode)/BLOCKSIZE
-+ + /* No. of blocks that group descriptors occupy */
-+ rndup(nbgroups*sizeof(groupdescriptor),BLOCKSIZE)/BLOCKSIZE;
-+ free_blocks = nbblocks - overhead_per_group * nbgroups - 1 /*boot block */;
-+ free_blocks_per_group = free_blocks/nbgroups;
-+ if (free_blocks > free_blocks_per_group * nbgroups)
-+ free_blocks_per_group++;
-+ nbblocks_per_group = free_blocks_per_group + overhead_per_group;
-+ /* e2fsck complains if nbblocks_per_group is not a multiple of 8 */
-+ nbblocks_per_group = rndup(nbblocks_per_group,8);
-+ free_blocks_per_group = nbblocks_per_group - overhead_per_group;
-+ if (nbblocks_per_group > BLOCKS_PER_GROUP) {
-+ /* Can this happen ? */
-+ nbblocks_per_group = BLOCKS_PER_GROUP;
-+ free_blocks_per_group = nbblocks_per_group - overhead_per_group;
-+ }
-+ nbblocks = nbblocks_per_group * nbgroups + 1;
-+
-+
- if(!(fs = (filesystem*)calloc(nbblocks, BLOCKSIZE)))
-- errexit("not enough memory for filesystem");
-+ error_msg_and_die("not enough memory for filesystem");
-
- // create the superblock for an empty filesystem
-- fs->sb.s_inodes_count = rndup(nbinodes, BLOCKSIZE/sizeof(inode));
-+ fs->sb.s_inodes_count = nbinodes_per_group * nbgroups;
- fs->sb.s_blocks_count = nbblocks;
- fs->sb.s_r_blocks_count = nbresrvd;
-- fs->sb.s_free_blocks_count = nbblocks;
-+ fs->sb.s_free_blocks_count = free_blocks_per_group*nbgroups;
- fs->sb.s_free_inodes_count = fs->sb.s_inodes_count - EXT2_FIRST_INO + 1;
- fs->sb.s_first_data_block = (BLOCKSIZE == 1024);
- fs->sb.s_log_block_size = BLOCKSIZE >> 11;
- fs->sb.s_log_frag_size = BLOCKSIZE >> 11;
-- fs->sb.s_blocks_per_group = BLOCKS_PER_GROUP;
-- fs->sb.s_frags_per_group = BLOCKS_PER_GROUP;
-- fs->sb.s_inodes_per_group = fs->sb.s_inodes_count;
-+ fs->sb.s_blocks_per_group = nbblocks_per_group;
-+ fs->sb.s_frags_per_group = nbblocks_per_group;
-+ fs->sb.s_inodes_per_group = nbinodes_per_group;
- fs->sb.s_magic = EXT2_MAGIC_NUMBER;
-
- // set up groupdescriptors
-- fs->sb.s_free_blocks_count -= 5 + fs->sb.s_inodes_count * sizeof(inode) / BLOCKSIZE;
-- fs->gd.bg_free_blocks_count = fs->sb.s_free_blocks_count;
-- fs->gd.bg_free_inodes_count = fs->sb.s_free_inodes_count;
-- fs->gd.bg_used_dirs_count = 1;
-- fs->gd.bg_block_bitmap = 3;
-- fs->gd.bg_inode_bitmap = 4;
-- fs->gd.bg_inode_table = 5;
--
-- // mark non-filesystem blocks and inodes as allocated
-- for(i = fs->sb.s_blocks_count; i <= BLOCKSIZE * 8; i++)
-- allocate(fs->bbm, i);
-- for(i = fs->sb.s_inodes_count + 1; i <= BLOCKSIZE * 8; i++)
-- allocate(fs->ibm, i);
--
-- // mark system blocsk and inodes as allocated
-- for(i = 1; i <= 4 + fs->sb.s_inodes_count * sizeof(inode) / BLOCKSIZE; i++)
-- allocate(fs->bbm, i);
-- for(i = 1; i < EXT2_FIRST_INO; i++)
-- allocate(fs->ibm, i);
--
-- // make root inode and directory
-- fs->itab[EXT2_ROOT_INO-1].i_mode = FM_IFDIR | FM_IRWXU | FM_IRWXG | FM_IRWXO;
-- fs->itab[EXT2_ROOT_INO-1].i_size = BLOCKSIZE;
-- fs->itab[EXT2_ROOT_INO-1].i_links_count = 2;
-+ gd = rndup(nbgroups*sizeof(groupdescriptor),BLOCKSIZE)/BLOCKSIZE;
-+ itbl = nbinodes_per_group*sizeof(inode)/BLOCKSIZE;
-+ for(i = 0,bbmpos=2+gd,ibmpos=3+gd,itblpos =4+gd;
-+ i<nbgroups;
-+ i++, bbmpos += nbblocks_per_group,ibmpos += nbblocks_per_group,
-+ itblpos += nbblocks_per_group) {
-+
-+ fs->gd[i].bg_free_blocks_count = free_blocks_per_group;
-+ fs->gd[i].bg_free_inodes_count = nbinodes_per_group;
-+ fs->gd[i].bg_used_dirs_count = 0;
-+ fs->gd[i].bg_block_bitmap = bbmpos;
-+ fs->gd[i].bg_inode_bitmap = ibmpos;
-+ fs->gd[i].bg_inode_table = itblpos;
-+ }
-+
-+ /* Mark non-filesystem blocks and inodes as allocated */
-+ /* Mark system blocks and inodes as allocated */
-+ for(i = 0; i<nbgroups;i++) {
-+
-+ /* Block bitmap */
-+ bbm = get_blk(fs,fs->gd[i].bg_block_bitmap);
-+ //non-filesystem blocks.
-+ for(j=fs->sb.s_blocks_per_group + 1; j <= BLOCKSIZE * 8; j++)
-+ allocate(bbm, j);
-+ //system blocks
-+ for(j = 1; j <= 3+gd+itbl; j++)
-+ allocate(bbm, j);
-+
-+ /* Inode bitmap */
-+ ibm = get_blk(fs,fs->gd[i].bg_inode_bitmap);
-+ //non-filesystem inodes
-+ for(j = fs->sb.s_inodes_per_group+1; j <= BLOCKSIZE * 8; j++)
-+ allocate(ibm, j);
-+ }
-+
-+ /* We have groups now. Add the root filesystem in group 0 */
-+ /* Also allocate the system inodes in group 0 and update */
-+ /* directory count and inode count for group 0 */
-+
-+ ibm = get_blk(fs,fs->gd[0].bg_inode_bitmap);
-+ for(j = 1; j < EXT2_FIRST_INO; j++) {
-+ allocate(ibm, j);
-+ fs->gd[0].bg_free_inodes_count--;
-+ }
-+ fs->gd[0].bg_used_dirs_count = 1;
-+ itab0 = (inode *)get_blk(fs,fs->gd[0].bg_inode_table);
-+ itab0[EXT2_ROOT_INO-1].i_mode = FM_IFDIR | FM_IRWXU | FM_IRWXG | FM_IRWXO;
-+ itab0[EXT2_ROOT_INO-1].i_size = BLOCKSIZE;
-+ itab0[EXT2_ROOT_INO-1].i_links_count = 2;
-+
- b = get_workblk();
- d = (directory*)b;
- d->d_inode = EXT2_ROOT_INO;
-@@ -1147,9 +1522,14 @@
- // make lost+found directory and reserve blocks
- if(fs->sb.s_r_blocks_count)
- {
-- nod = mkdir_fs(fs, EXT2_ROOT_INO, "lost+found", FM_IRWXU | FM_IRWXG | FM_IRWXO);
-+ nod = mkdir_fs(fs, EXT2_ROOT_INO, "lost+found", S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH, 0, 0, time(NULL));
- memset(b, 0, BLOCKSIZE);
- ((directory*)b)->d_rec_len = BLOCKSIZE;
-+ /* We run into problems with e2fsck if directory lost+found grows
-+ * bigger than this. Need to find out why this happens - sundar
-+ */
-+ if (fs->sb.s_r_blocks_count > 2049 )
-+ fs->sb.s_r_blocks_count=2049;
- for(i = 1; i < fs->sb.s_r_blocks_count; i++)
- extend_blk(fs, nod, b, 1);
- get_nod(fs, nod)->i_size = fs->sb.s_r_blocks_count * BLOCKSIZE;
-@@ -1170,24 +1550,24 @@
- // loads a filesystem from disk
- filesystem * load_fs(FILE * fh, int swapit)
- {
-- size_t fssize;
-+ size_t fssize = 0;
- filesystem *fs;
- if((fseek(fh, 0, SEEK_END) < 0) || ((fssize = ftell(fh)) < 0))
-- pexit("input filesystem image");
-+ perror_msg_and_die("input filesystem image");
- rewind(fh);
- fssize = (fssize + BLOCKSIZE - 1) / BLOCKSIZE;
- if(fssize < 16) // totally arbitrary
-- errexit("too small filesystem");
-- if(fssize > BLOCKS_PER_GROUP) // I build only one group
-- errexit("too big filesystem");
-+ error_msg_and_die("too small filesystem");
-+/* if(fssize > BLOCKS_PER_GROUP) // I build only one group
-+ error_msg_and_die("too big filesystem"); */
- if(!(fs = (filesystem*)calloc(fssize, BLOCKSIZE)))
-- errexit("not enough memory for filesystem");
-+ error_msg_and_die("not enough memory for filesystem");
- if(fread(fs, BLOCKSIZE, fssize, fh) != fssize)
-- pexit("input filesystem image");
-+ perror_msg_and_die("input filesystem image");
- if(swapit)
- swap_badfs(fs);
- if(fs->sb.s_rev_level || (fs->sb.s_magic != EXT2_MAGIC_NUMBER))
-- errexit("not a suitable ext2 filesystem");
-+ error_msg_and_die("not a suitable ext2 filesystem");
- return fs;
- }
-
-@@ -1230,9 +1610,9 @@
- while((bk = walk_bw(fs, nod, &bw, 0, 0)) != WALK_END)
- {
- if(fsize <= 0)
-- errexit("wrong size while saving inode %d", nod);
-+ error_msg_and_die("wrong size while saving inode %d", nod);
- if(fwrite(get_blk(fs, bk), (fsize > BLOCKSIZE) ? BLOCKSIZE : fsize, 1, f) != 1)
-- errexit("error while saving inode %d", nod);
-+ error_msg_and_die("error while saving inode %d", nod);
- fsize -= BLOCKSIZE;
- }
- }
-@@ -1250,7 +1630,7 @@
- {
- int i, j;
- if(fsize <= 0)
-- errexit("wrong size while saving inode %d", nod);
-+ error_msg_and_die("wrong size while saving inode %d", nod);
- b = get_blk(fs, bk);
- for(i = 0; i < 64; i++)
- {
-@@ -1406,7 +1786,7 @@
- s = (nod >= EXT2_FIRST_INO) ? "normal" : "unknown reserved";
- }
- printf("inode %d (%s, %d links): ", nod, s, get_nod(fs, nod)->i_links_count);
-- if(!allocated(fs->ibm, nod))
-+ if(!allocated(GRP_GET_INODE_BITMAP(fs,nod), GRP_IBM_OFFSET(fs,nod)))
- {
- printf("unallocated\n");
- return;
-@@ -1440,24 +1820,46 @@
- default:
- list_blocks(fs, nod);
- }
-+ printf("Done with inode %d\n",nod);
- }
-
- // describes various fields in a filesystem
- void print_fs(filesystem *fs)
- {
-- int i;
-- printf("%d blocks (%d free, %d reserved), first data block: %d\n", fs->sb.s_blocks_count, fs->sb.s_free_blocks_count, fs->sb.s_r_blocks_count, fs->sb.s_first_data_block);
-- printf("%d inodes (%d free)\n", fs->sb.s_inodes_count, fs->sb.s_free_inodes_count);
-- printf("block size = %d, frag size = %d\n", fs->sb.s_log_block_size ? (fs->sb.s_log_block_size << 11) : 1024, fs->sb.s_log_frag_size ? (fs->sb.s_log_frag_size << 11) : 1024);
-- printf("%d blocks per group, %d frags per group, %d inodes per group\n", fs->sb.s_blocks_per_group, fs->sb.s_frags_per_group, fs->sb.s_inodes_per_group);
-- printf("block bitmap: block %d, inode bitmap: block %d, inode table: block %d\n", fs->gd.bg_block_bitmap, fs->gd.bg_inode_bitmap, fs->gd.bg_inode_table);
-- printf("block bitmap allocation:\n");
-- print_bm(fs->bbm, fs->sb.s_blocks_count);
-- printf("inode bitmap allocation:\n");
-- print_bm(fs->ibm, fs->sb.s_inodes_count);
-- for(i=1; i<=fs->sb.s_inodes_count; i++)
-- if(allocated(fs->ibm, i))
-- print_inode(fs, i);
-+ int i,j;
-+ uint8 *ibm;
-+
-+ printf("%d blocks (%d free, %d reserved), first data block: %d\n",
-+ fs->sb.s_blocks_count, fs->sb.s_free_blocks_count,
-+ fs->sb.s_r_blocks_count, fs->sb.s_first_data_block);
-+ printf("%d inodes (%d free)\n", fs->sb.s_inodes_count,
-+ fs->sb.s_free_inodes_count);
-+ printf("block size = %d, frag size = %d\n",
-+ fs->sb.s_log_block_size ? (fs->sb.s_log_block_size << 11) : 1024,
-+ fs->sb.s_log_frag_size ? (fs->sb.s_log_frag_size << 11) : 1024);
-+ printf("Number of groups: %d\n",GRP_NBGROUPS(fs));
-+ printf("%d blocks per group,%d frags per group,%d inodes per group\n",
-+ fs->sb.s_blocks_per_group, fs->sb.s_frags_per_group,
-+ fs->sb.s_inodes_per_group);
-+ printf("Size of inode table: %d blocks\n",
-+ fs->sb.s_inodes_per_group * sizeof(inode)/BLOCKSIZE);
-+ for (i = 0; i < GRP_NBGROUPS(fs); i++) {
-+ printf("Group No: %d\n", i);
-+ printf("block bitmap: block %d,inode bitmap: block %d, inode table: block %d\n",
-+ fs->gd[i].bg_block_bitmap, fs->gd[i].bg_inode_bitmap,
-+ fs->gd[i].bg_inode_table);
-+ printf("Free blocks count: %d\n",fs->gd[i].bg_free_blocks_count);
-+ printf("Free inodes count: %d\n",fs->gd[i].bg_free_inodes_count);
-+ printf("Used dir count: %d\n",fs->gd[i].bg_used_dirs_count);
-+ printf("block bitmap allocation:\n");
-+ print_bm(GRP_GET_GROUP_BBM(fs, i),fs->sb.s_blocks_per_group);
-+ printf("inode bitmap allocation:\n");
-+ ibm = GRP_GET_GROUP_IBM(fs, i);
-+ print_bm(ibm, fs->sb.s_inodes_per_group);
-+ for (j = 1; j <= fs->sb.s_inodes_per_group; j++)
-+ if (allocated(ibm, j))
-+ print_inode(fs, i*fs->sb.s_inodes_per_group + j);
-+ }
- }
-
- void dump_fs(filesystem *fs, FILE * fh, int swapit)
-@@ -1467,31 +1869,234 @@
- if(swapit)
- swap_goodfs(fs);
- if(fwrite(fs, BLOCKSIZE, nbblocks, fh) < nbblocks)
-- pexit("output filesystem image");
-+ perror_msg_and_die("output filesystem image");
- if(swapit)
- swap_badfs(fs);
- }
-
-+/* device table entries take the form of:
-+ <path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+ /dev/mem c 640 0 0 1 1 0 0 -
-+
-+ type can be one of:
-+ f A regular file
-+ d Directory
-+ c Character special device file
-+ b Block special device file
-+ p Fifo (named pipe)
-+
-+ I don't bother with symlinks (permissions are irrelevant), hard
-+ links (special cases of regular files), or sockets (why bother).
-+
-+ Regular files must exist in the target root directory. If a char,
-+ block, fifo, or directory does not exist, it will be created.
-+*/
-+static int interpret_table_entry(filesystem *fs, char *line)
-+{
-+ char type, *name = NULL, *tmp, *dir, *bname;
-+ unsigned long mode = 0755, uid = 0, gid = 0, major = 0, minor = 0;
-+ unsigned long start = 0, increment = 1, count = 0;
-+ inode *entry;
-+ uint32 nod, parent;
-+
-+ if (sscanf (line, "%" SCANF_PREFIX "s %c %lo %lu %lu %lu %lu %lu %lu %lu",
-+ SCANF_STRING(name), &type, &mode, &uid, &gid, &major, &minor,
-+ &start, &increment, &count) < 0)
-+ {
-+ return 1;
-+ }
-+
-+ if (!strcmp(name, "/")) {
-+ error_msg_and_die("Device table entries require absolute paths");
-+ }
-+
-+ /* Check if this file already exists... */
-+ switch (type) {
-+ case 'd':
-+ mode |= S_IFDIR;
-+ break;
-+ case 'f':
-+ mode |= S_IFREG;
-+ break;
-+ case 'p':
-+ mode |= S_IFIFO;
-+ break;
-+ case 'c':
-+ mode |= S_IFCHR;
-+ break;
-+ case 'b':
-+ mode |= S_IFBLK;
-+ break;
-+ default:
-+ error_msg_and_die("Unsupported file type");
-+ }
-+ nod = 0;
-+ if (count==0)
-+ nod = find_path(fs, EXT2_ROOT_INO, name);
-+ if (nod) {
-+ /* Ok, we just need to fixup an existing entry
-+ * and we will be all done... */
-+ entry = get_nod(fs, nod);
-+ entry->i_uid = uid;
-+ entry->i_gid = gid;
-+ entry->i_mode = mode;
-+ if (major) {
-+ dev_t rdev = makedev(major, minor);
-+ ((uint8*)entry->i_block)[0] = (rdev & 0xff);
-+ ((uint8*)entry->i_block)[1] = (rdev >> 8);
-+ }
-+ } else {
-+ /* Try and find our parent now */
-+ tmp = xstrdup(name);
-+ dir = dirname(tmp);
-+ parent = find_path(fs, EXT2_ROOT_INO, dir);
-+ free(tmp);
-+ if (!parent) {
-+ error_msg ("skipping device_table entry '%s': no parent directory!", name);
-+ free(name);
-+ return 1;
-+ }
-+
-+ tmp = xstrdup(name);
-+ bname = xstrdup(basename(tmp));
-+ free(tmp);
-+ switch (type) {
-+ case 'd':
-+ mkdir_fs(fs, parent, bname, mode|FM_IFDIR, uid, gid, time(NULL));
-+ break;
-+ case 'f':
-+#if 0
-+ {
-+ // This is a bit odd.. This will try to include
-+ // the file of the same name from your _build_
-+ // system... Probably a very bad idea....
-+ struct stat st;
-+ FILE *fh = xfopen(name, "r");
-+ lstat(name, &st);
-+ mkfile_fs(fs, parent, bname, mode|FM_IFREG, st.st_size, fh, uid, gid, st.st_ctime);
-+ fclose(fh);
-+ }
-+#else
-+ error_msg("ignoring entry %s", name);
-+#endif
-+ break;
-+ case 'p':
-+ error_msg("ignoring entry %s", name);
-+ break;
-+ case 'c':
-+ case 'b':
-+ if (count > 0) {
-+ dev_t rdev;
-+ char *dname;
-+ unsigned long i;
-+ for (i = start; i < count; i++) {
-+ asprintf(&dname, "%s%lu", bname, i);
-+ nod = find_path(fs, EXT2_ROOT_INO, dname);
-+ if (nod) {
-+ /* We just need to fixup an existing entry */
-+ entry = get_nod(fs, nod);
-+ } else {
-+ nod = alloc_nod(fs);
-+ add2dir(fs, parent, nod, dname, mode, uid, gid, time(NULL));
-+ entry = get_nod(fs, nod);
-+ }
-+ entry->i_uid = uid;
-+ entry->i_gid = gid;
-+ entry->i_mode = mode;
-+ rdev = makedev(major, minor + (i * increment - start));
-+ ((uint8*)entry->i_block)[0] = (rdev & 0xff);
-+ ((uint8*)entry->i_block)[1] = (rdev >> 8);
-+ free(dname);
-+ }
-+ } else {
-+ dev_t rdev = makedev(major, minor);
-+ nod = alloc_nod(fs);
-+ add2dir(fs, parent, nod, bname, mode, uid, gid, time(NULL));
-+ entry = get_nod(fs, nod);
-+ ((uint8*)entry->i_block)[0] = (rdev & 0xff);
-+ ((uint8*)entry->i_block)[1] = (rdev >> 8);
-+ }
-+ break;
-+ default:
-+ error_msg_and_die("Unsupported file type");
-+ }
-+ free(bname);
-+ }
-+ free(name);
-+ return 0;
-+}
-+
-+static int parse_device_table(filesystem *root, FILE * file)
-+{
-+ char *line;
-+ int status = 0;
-+ size_t length = 0;
-+
-+ /* Turn off squash, since we must ensure that values
-+ * entered via the device table are not squashed */
-+ squash_uids = 0;
-+ squash_perms = 0;
-+
-+ /* Looks ok so far. The general plan now is to read in one
-+ * line at a time, check for leading comment delimiters ('#'),
-+ * then try and parse the line as a device table. If we fail
-+ * to parse things, try and help the poor fool to fix their
-+ * device table with a useful error msg... */
-+ line = NULL;
-+ while (getline(&line, &length, file) != -1) {
-+ /* First trim off any whitespace */
-+ int len = strlen(line);
-+
-+ /* trim trailing whitespace */
-+ while (len > 0 && isspace(line[len - 1]))
-+ line[--len] = '\0';
-+ /* trim leading whitespace */
-+ memmove(line, &line[strspn(line, " \n\r\t\v")], len);
-+
-+ /* How long are we after trimming? */
-+ len = strlen(line);
-+
-+ /* If this is NOT a comment line, try to interpret it */
-+ if (len && *line != '#') {
-+ if (interpret_table_entry(root, line))
-+ status = 1;
-+ }
-+
-+ free(line);
-+ line = NULL;
-+ }
-+ fclose(file);
-+
-+ return status;
-+}
-+
-+/*
-+Local Variables:
-+c-file-style: "linux"
-+c-basic-offset: 4
-+tab-width: 4
-+End:
-+*/
-+
- void showhelp(void)
- {
- fprintf(stderr, "Usage: %s [options] image\n"
- "Create an ext2 filesystem image from directories/files\n\n"
-- " -x image Use this image as a starting point\n"
-- " -d directory Add this directory as source\n"
-- " -f file Add nodes (e.g. devices) from this spec file\n"
-- " -b blocks Size in blocks\n"
-- " -i inodes Number of inodes\n"
-- " -r reserved Number of reserved blocks\n"
-- " -g path Generate a block map file for this path\n"
-- " -e value Fill unallocated blocks with value\n"
-- " -z Make files with holes\n"
-- " -v Print resulting filesystem structure\n"
-- " -h Show this help\n\n"
-- "Example of spec file:\n"
-- "drwx /dev\n"
-- "crw- 10,190 /dev/lcd\n"
-- "brw- 1,0 /dev/ram0\n\n"
-- "Report bugs to xavier.bestel@free.fr\n", argv0);
-+ " -x image Use this image as a starting point\n"
-+ " -d directory Add this directory as source\n"
-+ " -b blocks Size in blocks\n"
-+ " -i inodes Number of inodes\n"
-+ " -r reserved Number of reserved blocks\n"
-+ " -g path Generate a block map file for this path\n"
-+ " -e value Fill unallocated blocks with value\n"
-+ " -z Make files with holes\n"
-+ " -D,-f Use the named FILE as a device table file\n"
-+ " -q Squash permissions and owners making all files be owned by root\n"
-+ " -U Squash owners making all files be owned by root\n"
-+ " -P Squash permissions on all files\n"
-+ " -v Print resulting filesystem structure\n"
-+ " -h Show this help\n\n"
-+ "Report bugs to xavier.bestel@free.fr\n", app_name);
- }
-
- #define MAX_DOPT 128
-@@ -1521,21 +2126,17 @@
- filesystem *fs;
- int i;
- int c;
-+ struct stat sb;
-+ FILE *devtable = NULL;
-
-- argv0 = argv[0];
-- if(argc <= 1)
-- {
-- showhelp();
-- exit(1);
-- }
-- while((c = getopt(argc, argv, "x:f:d:b:i:r:g:e:zvh")) != EOF)
-+ app_name = argv[0];
-+ while((c = getopt(argc, argv, "x:d:b:i:r:g:e:zvhD:f:qUP")) != EOF)
- switch(c)
- {
- case 'x':
- fsin = optarg;
- break;
- case 'd':
-- case 'f':
- dopt[didx++] = optarg;
- break;
- case 'b':
-@@ -1556,6 +2157,24 @@
- case 'z':
- holes = 1;
- break;
-+ case 'f':
-+ case 'D':
-+ devtable = xfopen(optarg, "r");
-+ if (fstat(fileno(devtable), &sb) < 0)
-+ perror_msg_and_die(optarg);
-+ if (sb.st_size < 10)
-+ error_msg_and_die("%s: not a proper device table file", optarg);
-+ break;
-+ case 'q':
-+ squash_uids = 1;
-+ squash_perms = 1;
-+ break;
-+ case 'U':
-+ squash_uids = 1;
-+ break;
-+ case 'P':
-+ squash_perms = 1;
-+ break;
- case 'v':
- verbose = 1;
- break;
-@@ -1566,16 +2185,14 @@
- exit(1);
- }
- if(optind < (argc - 1))
-- errexit("too many arguments");
-+ error_msg_and_die("too many arguments");
- if(optind == (argc - 1))
- fsout = argv[optind];
- if(fsin)
- {
- if(strcmp(fsin, "-"))
- {
-- FILE * fh = fopen(fsin, "r");
-- if(!fh)
-- pexit(fsin);
-+ FILE * fh = xfopen(fsin, "r");
- fs = load_fs(fh, bigendian);
- fclose(fh);
- }
-@@ -1585,7 +2202,7 @@
- else
- {
- if(nbblocks == -1)
-- errexit("filesystem size unspecified");
-+ error_msg_and_die("filesystem size unspecified");
- if(nbinodes == -1)
- nbinodes = nbblocks * BLOCKSIZE / rndup(BYTES_PER_INODE, BLOCKSIZE);
- if(nbresrvd == -1)
-@@ -1595,35 +2212,30 @@
- for(i = 0; i < didx; i++)
- {
- struct stat st;
-- FILE *fh;
- char *pdir;
- stat(dopt[i], &st);
- switch(st.st_mode & S_IFMT)
- {
-- case S_IFREG:
-- if(!(fh = fopen(dopt[i], "r")))
-- pexit(dopt[i]);
-- add2fs_from_file(fs, EXT2_ROOT_INO, fh);
-- fclose(fh);
-- break;
- case S_IFDIR:
- if(!(pdir = getcwd(0, GETCWD_SIZE)))
-- pexit(dopt[i]);
-+ perror_msg_and_die(dopt[i]);
- if(chdir(dopt[i]) < 0)
-- pexit(dopt[i]);
-+ perror_msg_and_die(dopt[i]);
- add2fs_from_dir(fs, EXT2_ROOT_INO);
- if(chdir(pdir) < 0)
-- pexit(pdir);
-+ perror_msg_and_die(pdir);
- free(pdir);
- break;
- default:
-- errexit("%s in neither a file nor a directory", dopt[i]);
-+ error_msg_and_die("%s is neither a file nor a directory", dopt[i]);
- }
- }
- if(emptyval)
- for(i = 1; i < fs->sb.s_blocks_count; i++)
-- if(!allocated(fs->bbm, i))
-+ if(!allocated(GRP_GET_BLOCK_BITMAP(fs,i),GRP_BBM_OFFSET(fs,i)))
- memset(get_blk(fs, i), emptyval, BLOCKSIZE);
-+ if(devtable)
-+ parse_device_table(fs, devtable);
- if(verbose)
- print_fs(fs);
- for(i = 0; i < gidx; i++)
-@@ -1633,21 +2245,18 @@
- char *p;
- FILE *fh;
- if(!(nod = find_path(fs, EXT2_ROOT_INO, gopt[i])))
-- errexit("path %s not found in filesystem", gopt[i]);
-+ error_msg_and_die("path %s not found in filesystem", gopt[i]);
- while((p = strchr(gopt[i], '/')))
- *p = '_';
- snprintf(fname, MAX_FILENAME-1, "%s.blk", gopt[i]);
-- if(!(fh = fopen(fname, "w")))
-- pexit(fname);
-+ fh = xfopen(fname, "w");
- fprintf(fh, "%d:", get_nod(fs, nod)->i_size);
- flist_blocks(fs, nod, fh);
- fclose(fh);
- }
- if(strcmp(fsout, "-"))
- {
-- FILE * fh = fopen(fsout, "w");
-- if(!fh)
-- pexit(fsout);
-+ FILE * fh = xfopen(fsout, "w");
- dump_fs(fs, fh, bigendian);
- fclose(fh);
- }
-diff -urN genext2fs-1.3.orig/test-mount.sh genext2fs-1.3/test-mount.sh
---- genext2fs-1.3.orig/test-mount.sh 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/test-mount.sh 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,96 @@
-+#!/bin/sh
-+set -e
-+
-+cleanup () {
-+ set +e
-+ umount mnt 2>/dev/null
-+ rm -rf mnt ext2.img lsout fout test 2>/dev/null
-+}
-+
-+# dtest - Uses the -d directory option of genext2fs
-+# Creates an image with a file of given size and verifies it
-+# Usage: dtest file-size number-of-blocks
-+dtest () {
-+ size=$1; blocks=$2;fname=$size
-+ echo "Testing with file of size $size "
-+ mkdir -p test
-+ cd test
-+ dd if=/dev/zero of=file.$1 bs=1 count=$size
-+ cd ..
-+ ./genext2fs -b $blocks -d test ext2.img
-+ md5=`md5sum ext2.img | cut -f1 -d " "`
-+ if ! /sbin/e2fsck -fn ext2.img ; then
-+ echo "fsck failed"
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ mkdir -p mnt
-+ if ! mount -t ext2 -o loop ext2.img mnt; then
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ if (! [ -f mnt/file.$fname ]) || \
-+ [ $fname != "`ls -al mnt | grep file.$fname |awk '{print $5}'`" ] ; then
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ echo PASSED "(md5 checksum for the image: $md5)"
-+ cleanup
-+}
-+
-+# ftest - Uses the -f spec-file option of genext2fs
-+# Creates an image with the devices mentioned in the given spec
-+# file and verifies it
-+# Usage: ftest spec-file number-of-blocks
-+ftest () {
-+ fname=$1; blocks=$2;
-+ echo "Testing with devices file $fname"
-+ ./genext2fs -b $blocks -f $fname ext2.img
-+ md5=`md5sum ext2.img | cut -f 1 -d " "`
-+ if ! /sbin/e2fsck -fn ext2.img ; then
-+ echo "fsck failed"
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ mkdir -p mnt
-+ if ! mount -t ext2 -o loop ext2.img mnt; then
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ if ! [ -d mnt/dev ] ; then
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ cat dev.txt | grep ^[bc] | \
-+ awk '{print $1substr($1,2)substr($1,2),$2,$3}'| \
-+ sort -d -k3.6 > fout
-+ ls -al mnt/dev | grep ^[bc] | \
-+ awk '{ print $1,$5$6,"/dev/"$10}' | \
-+ sort -d -k3.6 > lsout
-+ if ! diff fout lsout ; then
-+ echo FAILED
-+ cleanup
-+ exit 1
-+ fi
-+ echo PASSED "(md5 checksum for the image: $md5)"
-+ cleanup
-+}
-+
-+dtest 0 4096
-+dtest 0 8193
-+dtest 0 8194
-+dtest 1 4096
-+dtest 12288 4096
-+dtest 274432 4096
-+dtest 8388608 9000
-+dtest 16777216 20000
-+
-+ftest dev.txt 4096
-+
-+exit 0
-diff -urN genext2fs-1.3.orig/test.sh genext2fs-1.3/test.sh
---- genext2fs-1.3.orig/test.sh 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/test.sh 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,53 @@
-+#!/bin/sh
-+set -e
-+
-+# dtest - Uses the -d directory option of genext2fs
-+# Creates an image with a file of given size and verifies it
-+# Usage: dtest file-size number-of-blocks correct-checksum
-+dtest () {
-+ size=$1; blocks=$2; checksum=$3
-+ echo "Testing with file of size $size "
-+ mkdir -p test
-+ cd test
-+ dd if=/dev/zero of=file.$1 bs=1 count=$size
-+ cd ..
-+ ./genext2fs -b $blocks -d test ext2.img
-+ md5=`md5sum ext2.img | cut -d" " -f1`
-+ rm -rf ext2.img test
-+ if [ $md5 == $checksum ] ; then
-+ echo PASSED
-+ else
-+ echo FAILED
-+ exit 1
-+ fi
-+}
-+
-+# ftest - Uses the -f spec-file option of genext2fs
-+# Creates an image with the devices mentioned in the given spec
-+# file and verifies it
-+# Usage: ftest spec-file number-of-blocks correct-checksum
-+ftest () {
-+ fname=$1; blocks=$2; checksum=$3
-+ echo "Testing with devices file $fname"
-+ ./genext2fs -b $blocks -f $fname ext2.img
-+ md5=`md5sum ext2.img | cut -d" " -f1`
-+ rm -rf ext2.img
-+ if [ $md5 == $checksum ] ; then
-+ echo PASSED
-+ else
-+ echo FAILED
-+ exit 1
-+ fi
-+}
-+
-+dtest 0 4096 491a43ab93c2e5c186c9f1f72d88e5c5
-+dtest 0 8193 6289224f0b7f151994479ba156c43505
-+dtest 0 8194 3272c43c25e8d0c3768935861a643a65
-+dtest 1 4096 5ee24486d33af88c63080b09d8cadfb5
-+dtest 12288 4096 494498364defdc27b2770d1f9c1e3387
-+dtest 274432 4096 65c4bd8d30bf563fa5434119a12abff1
-+dtest 8388608 9000 9a49b0461ee236b7fd7c452fb6a1f2dc
-+dtest 16777216 20000 91e16429c901b68d30f783263f0611b7
-+
-+ftest dev.txt 4096 921ee9343b0759e16ad8d979d7dd16ec
-+exit 0
+++ /dev/null
-diff -urN diethotplug-0.4.orig/pci.c diethotplug-0.4/pci.c
---- diethotplug-0.4.orig/pci.c Wed Jan 9 13:57:29 2002
-+++ diethotplug-0.4/pci.c Wed Jan 30 22:35:24 2002
-@@ -68,8 +68,8 @@
- }
-
- /* check that the class matches */
-- class_temp = pci_module_map[i].class_mask & pci_class;
-- if (pci_module_map[i].class != class_temp) {
-+ class_temp = (pci_module_map[i].class ^ pci_class) & pci_module_map[i].class_mask;
-+ if (class_temp != 0) {
- dbg ("class mask check failed %x != %x",
- pci_module_map[i].class, class_temp);
- continue;
---- diethotplug-0.4/Makefile.orig Wed Jan 9 14:28:05 2002
-+++ diethotplug-0.4/Makefile Mon Jul 8 07:29:00 2002
-@@ -135,13 +135,13 @@
-
- # Rules on how to create the generated header files
- usb_modules.h:
-- perl convert_usb.pl < /lib/modules/$(KERNEL_VERSION)/modules.usbmap > $@
-+ perl convert_usb.pl < $(TARGET_DIR)/lib/modules/$(KERNEL_VERSION)/modules.usbmap > $@
-
- pci_modules.h:
-- perl convert_pci.pl < /lib/modules/$(KERNEL_VERSION)/modules.pcimap > $@
-+ perl convert_pci.pl < $(TARGET_DIR)/lib/modules/$(KERNEL_VERSION)/modules.pcimap > $@
-
- ieee1394_modules.h:
-- perl convert_ieee1394.pl < /lib/modules/$(KERNEL_VERSION)/modules.ieee1394map > $@
-+ perl convert_ieee1394.pl < $(TARGET_DIR)/lib/modules/$(KERNEL_VERSION)/modules.ieee1394map > $@
-
- hotplug_version.h:
- @echo \#define HOTPLUG_VERSION \"$(VERSION)\" > $@
+++ /dev/null
-diff -ruN ipkg-utils-1.7-old/ipkg-build ipkg-utils-1.7-new/ipkg-build
---- ipkg-utils-1.7-old/ipkg-build 2004-08-24 04:56:12.000000000 +0200
-+++ ipkg-utils-1.7-new/ipkg-build 2004-08-24 04:55:49.000000000 +0200
-@@ -47,6 +47,19 @@
-
- PKG_ERROR=0
-
-+ cvs_dirs=`find . -name 'CVS'`
-+ if [ -n "$cvs_dirs" ]; then
-+ if [ "$noclean" = "1" ]; then
-+ echo "*** Warning: The following CVS directories where found.
-+You probably want to remove them: " >&2
-+ ls -ld $cvs_dirs
-+ echo >&2
-+ else
-+ echo "*** Removing the following files: $cvs_dirs"
-+ rm -rf "$cvs_dirs"
-+ fi
-+ fi
-+
- tilde_files=`find . -name '*~'`
- if [ -n "$tilde_files" ]; then
- if [ "$noclean" = "1" ]; then
-@@ -134,8 +147,12 @@
-
- for script in $CONTROL/preinst $CONTROL/postinst $CONTROL/prerm $CONTROL/postrm; do
- if [ -f $script -a ! -x $script ]; then
-+ if [ "$noclean" = "1" ]; then
- echo "*** Error: package script $script is not executable" >&2
- PKG_ERROR=1
-+ else
-+ chmod a+x $script
-+ fi
- fi
- done
-
+++ /dev/null
-diff -ruN ipkg-utils-1.7-old/ipkg-buildpackage ipkg-utils-1.7-new/ipkg-buildpackage
---- ipkg-utils-1.7-old/ipkg-buildpackage 2001-07-26 17:36:36.000000000 +0200
-+++ ipkg-utils-1.7-new/ipkg-buildpackage 2004-07-05 19:46:24.000000000 +0200
-@@ -30,8 +30,9 @@
-
- set -e
-
--#SCRIPTDIR=/usr/local/bin
--SCRIPTDIR=/other/kurth/ipaq-dev/familiar/dist/ipkg/util/
-+SCRIPTDIR=/usr/local/bin
-+
-+IPKG_BUILD_OPTIONS=$*
-
- SCRIPTNAME=`basename $0`
-
-@@ -212,7 +213,7 @@
- # build the ipk package
- owd=`pwd`
- cd ..
--ipkg-build /tmp/${pkg} || exit 1
-+ipkg-build $IPKG_BUILD_OPTIONS /tmp/${pkg} || exit 1
-
- rm -rf /tmp/${pkg}
-
+++ /dev/null
-diff -Nrup iproute2.orig/lib/Makefile iproute2/lib/Makefile
---- iproute2.orig/lib/Makefile 2000-04-16 13:42:52.000000000 -0400
-+++ iproute2/lib/Makefile 2004-06-03 19:17:51.000000000 -0400
-@@ -6,10 +6,10 @@ NLOBJ=ll_map.o libnetlink.o
- all: libnetlink.a libutil.a
-
- libnetlink.a: $(NLOBJ)
-- ar rcs $@ $(NLOBJ)
-+ $(AR) rcs $@ $(NLOBJ)
-
- libutil.a: $(UTILOBJ) $(ADDLIB)
-- ar rcs $@ $(UTILOBJ) $(ADDLIB)
-+ $(AR) rcs $@ $(UTILOBJ) $(ADDLIB)
-
- clean:
- rm -f $(NLOBJ) $(UTILOBJ) $(ADDLIB) libnetlink.a libutil.a
-diff -Nrup iproute2.orig/tc/Makefile iproute2/tc/Makefile
---- iproute2.orig/tc/Makefile 2000-04-16 13:42:53.000000000 -0400
-+++ iproute2/tc/Makefile 2004-06-03 19:18:08.000000000 -0400
-@@ -43,7 +43,7 @@ all: libtc.a tc
- tc: $(TCOBJ) $(LIBNETLINK) $(LIBUTIL) $(TCLIB)
-
- libtc.a: $(TCLIB)
-- ar rcs $@ $(TCLIB)
-+ $(AR) rcs $@ $(TCLIB)
-
- clean:
- rm -f $(TCOBJ) $(TCLIB) libtc.a tc
+++ /dev/null
---- iproute2/tc/q_htb.c Sun Oct 21 22:07:29 2001
-+++ iproute2new/tc/q_htb.c Sun May 12 22:18:27 2002
-@@ -0,0 +1,306 @@
-+/*
-+ * q_htb.c HTB.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ *
-+ * Authors: Martin Devera, devik@cdi.cz
-+ *
-+ */
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <syslog.h>
-+#include <fcntl.h>
-+#include <sys/socket.h>
-+#include <netinet/in.h>
-+#include <arpa/inet.h>
-+#include <string.h>
-+
-+#include "utils.h"
-+#include "tc_util.h"
-+
-+#define HTB_TC_VER 0x30003
-+#if HTB_TC_VER >> 16 != TC_HTB_PROTOVER
-+#error "Different kernel and TC HTB versions"
-+#endif
-+
-+static void explain(void)
-+{
-+ fprintf(stderr, "Usage: ... qdisc add ... htb [default N] [r2q N]\n"
-+ " default minor id of class to which unclassified packets are sent {0}\n"
-+ " r2q DRR quantums are computed as rate in Bps/r2q {10}\n"
-+ " debug string of 16 numbers each 0-3 {0}\n\n"
-+ "... class add ... htb rate R1 burst B1 [prio P] [slot S] [pslot PS]\n"
-+ " [ceil R2] [cburst B2] [mtu MTU] [quantum Q]\n"
-+ " rate rate allocated to this class (class can still borrow)\n"
-+ " burst max bytes burst which can be accumulated during idle period {computed}\n"
-+ " ceil definite upper class rate (no borrows) {rate}\n"
-+ " cburst burst but for ceil {computed}\n"
-+ " mtu max packet size we create rate map for {1600}\n"
-+ " prio priority of leaf; lower are served first {0}\n"
-+ " quantum how much bytes to serve from leaf at once {use r2q}\n"
-+ "\nTC HTB version %d.%d\n",HTB_TC_VER>>16,HTB_TC_VER&0xffff
-+ );
-+}
-+
-+static void explain1(char *arg)
-+{
-+ fprintf(stderr, "Illegal \"%s\"\n", arg);
-+ explain();
-+}
-+
-+
-+#define usage() return(-1)
-+
-+static int htb_parse_opt(struct qdisc_util *qu, int argc, char **argv, struct nlmsghdr *n)
-+{
-+ struct tc_htb_glob opt;
-+ struct rtattr *tail;
-+ unsigned i; char *p;
-+ memset(&opt,0,sizeof(opt));
-+ opt.rate2quantum = 10;
-+ opt.version = 3;
-+
-+ while (argc > 0) {
-+ if (matches(*argv, "r2q") == 0) {
-+ NEXT_ARG();
-+ if (get_u32(&opt.rate2quantum, *argv, 10)) {
-+ explain1("r2q"); return -1;
-+ }
-+ } else if (matches(*argv, "default") == 0) {
-+ NEXT_ARG();
-+ if (get_u32(&opt.defcls, *argv, 16)) {
-+ explain1("default"); return -1;
-+ }
-+ } else if (matches(*argv, "debug") == 0) {
-+ NEXT_ARG(); p = *argv;
-+ for (i=0; i<16; i++,p++) {
-+ if (*p<'0' || *p>'3') break;
-+ opt.debug |= (*p-'0')<<(2*i);
-+ }
-+ } else {
-+ fprintf(stderr, "What is \"%s\"?\n", *argv);
-+ explain();
-+ return -1;
-+ }
-+ argc--; argv++;
-+ }
-+ tail = (struct rtattr*)(((void*)n)+NLMSG_ALIGN(n->nlmsg_len));
-+ addattr_l(n, 1024, TCA_OPTIONS, NULL, 0);
-+ addattr_l(n, 2024, TCA_HTB_INIT, &opt, NLMSG_ALIGN(sizeof(opt)));
-+ tail->rta_len = (((void*)n)+NLMSG_ALIGN(n->nlmsg_len)) - (void*)tail;
-+ return 0;
-+}
-+
-+static int htb_parse_class_opt(struct qdisc_util *qu, int argc, char **argv, struct nlmsghdr *n)
-+{
-+ int ok=0;
-+ struct tc_htb_opt opt;
-+ __u32 rtab[256],ctab[256];
-+ unsigned buffer=0,cbuffer=0;
-+ int cell_log=-1,ccell_log = -1,mtu;
-+ struct rtattr *tail;
-+
-+ memset(&opt, 0, sizeof(opt)); mtu = 1600; /* eth packet len */
-+
-+ while (argc > 0) {
-+ if (matches(*argv, "prio") == 0) {
-+ NEXT_ARG();
-+ if (get_u32(&opt.prio, *argv, 10)) {
-+ explain1("prio"); return -1;
-+ }
-+ ok++;
-+ } else if (matches(*argv, "mtu") == 0) {
-+ NEXT_ARG();
-+ if (get_u32(&mtu, *argv, 10)) {
-+ explain1("mtu"); return -1;
-+ }
-+ } else if (matches(*argv, "quantum") == 0) {
-+ NEXT_ARG();
-+ if (get_u32(&opt.quantum, *argv, 10)) {
-+ explain1("quantum"); return -1;
-+ }
-+ } else if (matches(*argv, "burst") == 0 ||
-+ strcmp(*argv, "buffer") == 0 ||
-+ strcmp(*argv, "maxburst") == 0) {
-+ NEXT_ARG();
-+ if (get_size_and_cell(&buffer, &cell_log, *argv) < 0) {
-+ explain1("buffer");
-+ return -1;
-+ }
-+ ok++;
-+ } else if (matches(*argv, "cburst") == 0 ||
-+ strcmp(*argv, "cbuffer") == 0 ||
-+ strcmp(*argv, "cmaxburst") == 0) {
-+ NEXT_ARG();
-+ if (get_size_and_cell(&cbuffer, &ccell_log, *argv) < 0) {
-+ explain1("cbuffer");
-+ return -1;
-+ }
-+ ok++;
-+ } else if (strcmp(*argv, "ceil") == 0) {
-+ NEXT_ARG();
-+ if (opt.ceil.rate) {
-+ fprintf(stderr, "Double \"ceil\" spec\n");
-+ return -1;
-+ }
-+ if (get_rate(&opt.ceil.rate, *argv)) {
-+ explain1("ceil");
-+ return -1;
-+ }
-+ ok++;
-+ } else if (strcmp(*argv, "rate") == 0) {
-+ NEXT_ARG();
-+ if (opt.rate.rate) {
-+ fprintf(stderr, "Double \"rate\" spec\n");
-+ return -1;
-+ }
-+ if (get_rate(&opt.rate.rate, *argv)) {
-+ explain1("rate");
-+ return -1;
-+ }
-+ ok++;
-+ } else if (strcmp(*argv, "help") == 0) {
-+ explain();
-+ return -1;
-+ } else {
-+ fprintf(stderr, "What is \"%s\"?\n", *argv);
-+ explain();
-+ return -1;
-+ }
-+ argc--; argv++;
-+ }
-+
-+/* if (!ok)
-+ return 0;*/
-+
-+ if (opt.rate.rate == 0) {
-+ fprintf(stderr, "\"rate\" is required.\n");
-+ return -1;
-+ }
-+ /* if ceil params are missing, use the same as rate */
-+ if (!opt.ceil.rate) opt.ceil = opt.rate;
-+
-+ /* compute minimal allowed burst from rate; mtu is added here to make
-+ sute that buffer is larger than mtu and to have some safeguard space */
-+ if (!buffer) buffer = opt.rate.rate / HZ + mtu;
-+ if (!cbuffer) cbuffer = opt.ceil.rate / HZ + mtu;
-+
-+ if ((cell_log = tc_calc_rtable(opt.rate.rate, rtab, cell_log, mtu, 0)) < 0) {
-+ fprintf(stderr, "htb: failed to calculate rate table.\n");
-+ return -1;
-+ }
-+ opt.buffer = tc_calc_xmittime(opt.rate.rate, buffer);
-+ opt.rate.cell_log = cell_log;
-+
-+ if ((ccell_log = tc_calc_rtable(opt.ceil.rate, ctab, cell_log, mtu, 0)) < 0) {
-+ fprintf(stderr, "htb: failed to calculate ceil rate table.\n");
-+ return -1;
-+ }
-+ opt.cbuffer = tc_calc_xmittime(opt.ceil.rate, cbuffer);
-+ opt.ceil.cell_log = ccell_log;
-+
-+ tail = (struct rtattr*)(((void*)n)+NLMSG_ALIGN(n->nlmsg_len));
-+ addattr_l(n, 1024, TCA_OPTIONS, NULL, 0);
-+ addattr_l(n, 2024, TCA_HTB_PARMS, &opt, sizeof(opt));
-+ addattr_l(n, 3024, TCA_HTB_RTAB, rtab, 1024);
-+ addattr_l(n, 4024, TCA_HTB_CTAB, ctab, 1024);
-+ tail->rta_len = (((void*)n)+NLMSG_ALIGN(n->nlmsg_len)) - (void*)tail;
-+ return 0;
-+}
-+
-+static int htb_print_opt(struct qdisc_util *qu, FILE *f, struct rtattr *opt)
-+{
-+ struct rtattr *tb[TCA_HTB_RTAB+1];
-+ struct tc_htb_opt *hopt;
-+ struct tc_htb_glob *gopt;
-+ double buffer,cbuffer;
-+ SPRINT_BUF(b1);
-+ SPRINT_BUF(b2);
-+
-+ if (opt == NULL)
-+ return 0;
-+
-+ memset(tb, 0, sizeof(tb));
-+ parse_rtattr(tb, TCA_HTB_RTAB, RTA_DATA(opt), RTA_PAYLOAD(opt));
-+
-+ if (tb[TCA_HTB_PARMS]) {
-+
-+ hopt = RTA_DATA(tb[TCA_HTB_PARMS]);
-+ if (RTA_PAYLOAD(tb[TCA_HTB_PARMS]) < sizeof(*hopt)) return -1;
-+
-+ if (!hopt->level) {
-+ fprintf(f, "prio %d ", (int)hopt->prio);
-+ if (show_details)
-+ fprintf(f, "quantum %d ", (int)hopt->quantum);
-+ }
-+ fprintf(f, "rate %s ", sprint_rate(hopt->rate.rate, b1));
-+ buffer = ((double)hopt->rate.rate*tc_core_tick2usec(hopt->buffer))/1000000;
-+ fprintf(f, "ceil %s ", sprint_rate(hopt->ceil.rate, b1));
-+ cbuffer = ((double)hopt->ceil.rate*tc_core_tick2usec(hopt->cbuffer))/1000000;
-+ if (show_details) {
-+ fprintf(f, "burst %s/%u mpu %s ", sprint_size(buffer, b1),
-+ 1<<hopt->rate.cell_log, sprint_size(hopt->rate.mpu, b2));
-+ fprintf(f, "cburst %s/%u mpu %s ", sprint_size(cbuffer, b1),
-+ 1<<hopt->ceil.cell_log, sprint_size(hopt->ceil.mpu, b2));
-+ fprintf(f, "level %d ", (int)hopt->level);
-+ } else {
-+ fprintf(f, "burst %s ", sprint_size(buffer, b1));
-+ fprintf(f, "cburst %s ", sprint_size(cbuffer, b1));
-+ }
-+ if (show_raw)
-+ fprintf(f, "buffer [%08x] cbuffer [%08x] ",
-+ hopt->buffer,hopt->cbuffer);
-+ }
-+ if (tb[TCA_HTB_INIT]) {
-+ gopt = RTA_DATA(tb[TCA_HTB_INIT]);
-+ if (RTA_PAYLOAD(tb[TCA_HTB_INIT]) < sizeof(*gopt)) return -1;
-+
-+ fprintf(f, "r2q %d default %x direct_packets_stat %u",
-+ gopt->rate2quantum,gopt->defcls,gopt->direct_pkts);
-+ if (show_details)
-+ fprintf(f," ver %d.%d",gopt->version >> 16,gopt->version & 0xffff);
-+ }
-+ return 0;
-+}
-+
-+static int htb_print_xstats(struct qdisc_util *qu, FILE *f, struct rtattr *xstats)
-+{
-+ struct tc_htb_xstats *st;
-+ if (xstats == NULL)
-+ return 0;
-+
-+ if (RTA_PAYLOAD(xstats) < sizeof(*st))
-+ return -1;
-+
-+ st = RTA_DATA(xstats);
-+ fprintf(f, " lended: %u borrowed: %u giants: %u\n",
-+ st->lends,st->borrows,st->giants);
-+ fprintf(f, " tokens: %d ctokens: %d\n", st->tokens,st->ctokens);
-+ return 0;
-+}
-+
-+struct qdisc_util htb_util = {
-+ NULL,
-+ "htb",
-+ htb_parse_opt,
-+ htb_print_opt,
-+ htb_print_xstats,
-+ htb_parse_class_opt,
-+ htb_print_opt,
-+};
-+
-+/* for testing of old one */
-+struct qdisc_util htb2_util = {
-+ NULL,
-+ "htb2",
-+ htb_parse_opt,
-+ htb_print_opt,
-+ htb_print_xstats,
-+ htb_parse_class_opt,
-+ htb_print_opt,
-+};
---- iproute2/tc/Makefile Tue Jul 6 18:13:07 1999
-+++ iproute2new/tc/Makefile Thu May 9 12:34:19 2002
-@@ -21,6 +21,7 @@ ifeq ($(TC_CONFIG_DIFFSERV),y)
- endif
-
- #TCMODULES += q_csz.o
-+TCMODULES += q_htb.o
- #TCMODULES += q_hpfq.o
- #TCMODULES += q_hfsc.o
-
+++ /dev/null
-diff -burN iptables-1.2.11/extensions/Makefile iptables-1.2.11-openwrt/extensions/Makefile
---- iptables-1.2.11/extensions/Makefile 2004-06-17 12:22:54.000000000 +0200
-+++ iptables-1.2.11-openwrt/extensions/Makefile 2004-11-01 09:41:13.910649624 +0100
-@@ -5,12 +5,14 @@
- # header files are present in the include/linux directory of this iptables
- # package (HW)
- #
--PF_EXT_SLIB:=ah connlimit connmark conntrack dscp ecn esp helper icmp iprange length limit mac mark multiport owner physdev pkttype realm rpc sctp standard state tcp tcpmss tos ttl udp unclean CLASSIFY CONNMARK DNAT DSCP ECN LOG MARK MASQUERADE MIRROR NETMAP NOTRACK REDIRECT REJECT SAME SNAT TARPIT TCPMSS TOS TRACE TTL ULOG
--PF6_EXT_SLIB:=eui64 hl icmpv6 length limit mac mark multiport owner standard tcp udp HL LOG MARK TRACE
-+#PF_EXT_SLIB:=ah connlimit connmark conntrack dscp ecn esp helper icmp iprange length limit mac mark multiport owner physdev pkttype realm rpc sctp standard state tcp tcpmss tos ttl udp unclean CLASSIFY CONNMARK DNAT DSCP ECN LOG MARK MASQUERADE MIRROR NETMAP NOTRACK REDIRECT REJECT SAME SNAT TARPIT TCPMSS TOS TRACE TTL ULOG
-+PF_EXT_SLIB:=icmp iprange mark standard state tcp udp DNAT LOG MARK MASQUERADE REDIRECT REJECT SNAT TCPMSS
-+#PF6_EXT_SLIB:=eui64 hl icmpv6 length limit mac mark multiport owner standard tcp udp HL LOG MARK TRACE
-+PF6_EXT_SLIB:=eui64 icmpv6 mark standard tcp udp LOG
-
- # Optionals
--PF_EXT_SLIB_OPTS:=$(foreach T,$(wildcard extensions/.*-test),$(shell KERNEL_DIR=$(KERNEL_DIR) $(T)))
--PF6_EXT_SLIB_OPTS:=$(foreach T,$(wildcard extensions/.*-test6),$(shell KERNEL_DIR=$(KERNEL_DIR) $(T)))
-+#PF_EXT_SLIB_OPTS:=$(foreach T,$(wildcard extensions/.*-test),$(shell KERNEL_DIR=$(KERNEL_DIR) $(T)))
-+#PF6_EXT_SLIB_OPTS:=$(foreach T,$(wildcard extensions/.*-test6),$(shell KERNEL_DIR=$(KERNEL_DIR) $(T)))
-
- PF_EXT_ALL_SLIB:=$(patsubst extensions/libipt_%.c, %, $(wildcard extensions/libipt_*.c))
- PF6_EXT_ALL_SLIB:=$(patsubst extensions/libip6t_%.c, %, $(wildcard extensions/libip6t_*.c))
+++ /dev/null
-diff -urN libfloat-dist/Makefile libfloat/Makefile
---- libfloat-dist/Makefile 2003-10-26 00:33:45.000000000 -0500
-+++ libfloat/Makefile 2003-10-26 01:07:26.000000000 -0500
-@@ -1,7 +1,7 @@
- # Makefile for the Linux soft-float library
-
--CC=gcc -O2 -freg-struct-return -fomit-frame-pointer -D__LIBFLOAT__
--#CC=gcc -g -O2 -freg-struct-return -D__LIBFLOAT__
-+CFLAGS= -O2 -freg-struct-return -fomit-frame-pointer -D__LIBFLOAT__ -msoft-float
-+LIBGCC=$(shell $(CC) -print-libgcc-file-name)
- AR=ar
-
- all: libfloat.a libfloat.so.1
-@@ -12,24 +11,24 @@
-
- libfloat.so.1: softfloat.os fplib_glue.os
- rm -f libfloat.so.1
-- gcc -shared -Wl,-soname,libfloat.so.1 softfloat.os fplib_glue.os -o libfloat.so.1
-+ $(LD) -shared -soname=libfloat.so.1 softfloat.os fplib_glue.os -o libfloat.so.1 $(LIBGCC)
-
- softfloat.o: softfloat/bits64/softfloat.c
-- $(CC) -c -o softfloat.o -Isoftfloat/bits64/ARM-gcc softfloat/bits64/softfloat.c
-+ $(CC) $(CFLAGS) -c -o softfloat.o -Isoftfloat/bits64/ARM-gcc softfloat/bits64/softfloat.c
-
- fplib_glue.o: fplib_glue.S
-- $(CC) -c -o fplib_glue.o fplib_glue.S
-+ $(CC) $(CFLAGS) -c -o fplib_glue.o fplib_glue.S
-
- softfloat.os: softfloat/bits64/softfloat.c
-- $(CC) -fpic -c -o softfloat.os -Isoftfloat/bits64/ARM-gcc softfloat/bits64/softfloat.c
-+ $(CC) $(CFLAGS) -fpic -c -o softfloat.os -Isoftfloat/bits64/ARM-gcc softfloat/bits64/softfloat.c
-
- fplib_glue.os: fplib_glue.S
-- $(CC) -fpic -c -o fplib_glue.os fplib_glue.S
-+ $(CC) $(CFLAGS) -fpic -c -o fplib_glue.os fplib_glue.S
-
- install: libfloat.a libfloat.so.1
- cp -a libfloat.a $(DESTDIR)/usr/lib
-- cp -a libfloat.so.1 $(DESTDIR)/usr/lib
-- cd $(DESTDIR)/usr/lib; ln -s libfloat.so.1 libfloat.so
-+ cp -a libfloat.so.1 $(DESTDIR)/lib
-+ cd $(DESTDIR)/lib; ln -s libfloat.so.1 libfloat.so
- #ldconfig
-
- clean:
+++ /dev/null
-Package: libssl
-Priority: optional
-Version: 0.9.7d-1
-Architecture: mipsel
-Maintainer: below0
-Section: libs
-Source: Embedded in the main OpenWrt buildroot
-Description: OpenSSL libraries used for SSL encryption.
-
+++ /dev/null
---- ltp-full-20031002/testcases/kernel/syscalls/fmtmsg/Makefile.orig 2003-10-02 19:18:10.000000000 -0600
-+++ ltp-full-20031002/testcases/kernel/syscalls/fmtmsg/Makefile 2003-10-02 19:18:32.000000000 -0600
-@@ -24,7 +24,7 @@
- LOADLIBES+= -L../../../../lib -lltp
-
- SRCS=$(wildcard *.c)
--TARGETS=$(patsubst %.c,%,$(SRCS))
-+TARGETS=#$(patsubst %.c,%,$(SRCS))
-
- all: $(TARGETS)
-
---- ltp-full-20031002/testcases/kernel/syscalls/profil/Makefile.orig 2003-10-02 19:27:53.000000000 -0600
-+++ ltp-full-20031002/testcases/kernel/syscalls/profil/Makefile 2003-10-02 19:28:02.000000000 -0600
-@@ -23,7 +23,7 @@
- LOADLIBES+= -L../../../../lib -lltp
-
- SRCS=$(wildcard *.c)
--TARGETS=$(patsubst %.c,%,$(SRCS))
-+TARGETS=#$(patsubst %.c,%,$(SRCS))
-
- all: $(TARGETS)
-
---- ltp-full-20031002/testcases/network/rpc/rpc01/Makefile.orig 2003-10-02 19:36:51.000000000 -0600
-+++ ltp-full-20031002/testcases/network/rpc/rpc01/Makefile 2003-10-02 19:37:03.000000000 -0600
-@@ -2,7 +2,7 @@
- LDLIBS +=
-
- SRCS=$(wildcard *.c)
--TARGETS=$(patsubst %.c,%,$(SRCS))
-+TARGETS=#$(patsubst %.c,%,$(SRCS))
-
- all: $(TARGETS)
-
---- ltp-full-20031002/tools/netpipe-2.4-ipv6/Makefile.orig 2003-11-07 16:41:39.000000000 -0700
-+++ ltp-full-20031002/tools/netpipe-2.4-ipv6/Makefile 2003-11-07 16:42:41.000000000 -0700
-@@ -10,7 +10,7 @@
- DRIV_OBJ = netpipe.o
- INCLUDES = netpipe.h
- # Default target is just TCP
--TARGETS = NPtcp-ipv6
-+TARGETS = #NPtcp-ipv6
- # If you have TCP, MPI and PVM
- #TARGETS = NPtcp NPmpi NPpvm
- CFLAGS += -O -Wall
-@@ -28,12 +28,12 @@
- targets: $(TARGETS)
-
- install:
-- @ln -f NPtcp-ipv6 ../../testcases/bin
-+ #@ln -f NPtcp-ipv6 ../../testcases/bin
- #
- # This section of the Makefile is for compiling the binaries
- #
-
--TCP: NPtcp-ipv6
-+TCP: #NPtcp-ipv6
- @echo 'NPtcp has been built.'
-
- NPtcp-ipv6: NPtcp.o TCP.o
+++ /dev/null
-For some reason the lzo autoconf script uses a local macro that does
-a test for cross-compiles, and assumes that if the build target name
-and the host target name are the same that --host was not specified to
-the configure script. In the uClibc buildroot, this is not the case.
-
---- lzo-1.08/aclocal.m4 2002-07-12 18:31:52.000000000 -0700
-+++ lzo-1.08/aclocal.m4.new 2004-03-10 15:32:42.000000000 -0700
-@@ -205,12 +205,6 @@
- [
- AC_REQUIRE([AC_PROG_CC])
-
--if test "X$cross_compiling" = Xyes; then
-- if test "X$build" = "X$host"; then
-- AC_MSG_ERROR([you are cross compiling - please use the \`--host=' option])
-- fi
--fi
--
- ])
-
-
---- lzo-1.08/configure-dist 2004-03-11 02:18:28.000000000 -0600
-+++ lzo-1.08/configure 2004-03-11 02:19:16.000000000 -0600
-@@ -2282,13 +2282,13 @@
-
-
-
--if test "X$cross_compiling" = Xyes; then
-- if test "X$build" = "X$host"; then
-- { { echo "$as_me:$LINENO: error: you are cross compiling - please use the \`--host=' option" >&5
--echo "$as_me: error: you are cross compiling - please use the \`--host=' option" >&2;}
-- { (exit 1); exit 1; }; }
-- fi
--fi
-+#if test "X$cross_compiling" = Xyes; then
-+# if test "X$build" = "X$host"; then
-+# { { echo "$as_me:$LINENO: error: you are cross compiling - please use the \`--host=' option" >&5
-+#echo "$as_me: error: you are cross compiling - please use the \`--host=' option" >&2;}
-+# { (exit 1); exit 1; }; }
-+# fi
-+#fi
-
-
-
+++ /dev/null
-###############################################################################
-#
-# MIME-TYPES and the extensions that represent them
-#
-# This file is part of the "mime-support" package. Please send email (not a
-# bug report) to mime-support@packages.debian.org if you would like new types
-# and/or extensions to be added.
-#
-# Note: Compression schemes like "gzip", "bzip", and "compress" are not
-# actually "mime-types". They are "encodings" and hence must _not_ have
-# entries in this file to map their extensions. The "mime-type" of an
-# encoded file refers to the type of data that has been encoded, not the
-# type of the encoding.
-#
-###############################################################################
-
-
-application/activemessage
-application/andrew-inset
-application/applefile
-application/atomicmail
-application/cu-seeme csm cu
-application/dca-rft
-application/dec-dx
-application/dsptype tsp
-application/futuresplash spl
-application/ghostview
-application/mac-binhex40 hqx
-application/macwriteii
-application/msaccess mdb
-application/msword doc dot
-application/news-message-id
-application/news-transmission
-application/octet-stream bin
-application/oda oda
-application/pdf pdf
-application/pgp-signature pgp
-application/postscript ps ai eps
-application/remote-printing
-application/rtf rtf
-application/slate
-application/vnd.ms-excel xls xlb
-application/vnd.ms-powerpoint ppt pps pot
-application/vnd.wap.wmlc wmlc
-application/vnd.wap.wmlscriptc wmlsc
-application/wita
-application/wordperfect5.1 wp5
-application/zip zip
-application/x-123 wk
-application/x-bcpio bcpio
-application/x-chess-pgn pgn
-application/x-core
-application/x-cpio cpio
-application/x-csh
-application/x-debian-package deb
-application/x-director dcr dir dxr
-application/x-dms dms
-application/x-dvi dvi
-application/x-executable
-application/x-font pfa pfb gsf pcf pcf.Z
-application/x-gnumeric gnumeric
-application/x-gtar gtar tgz
-application/x-hdf hdf
-application/x-httpd-php phtml pht php
-application/x-httpd-php3 php3
-application/x-httpd-php3-source phps
-application/x-httpd-php3-preprocessed php3p
-application/x-httpd-php4 php4
-application/x-ica ica
-application/x-java class
-application/x-javascript js
-application/x-kdelnk
-application/x-kchart chrt
-application/x-killustrator kil
-application/x-kpresenter kpr kpt
-application/x-kspread ksp
-application/x-kword kwd kwt
-application/x-latex latex
-application/x-lha lha
-application/x-lzh lzh
-application/x-lzx lzx
-application/x-maker frm maker frame fm fb book fbdoc
-application/x-mif mif
-application/x-msdos-program com exe bat dll
-application/x-msi msi
-application/x-netcdf nc cdf
-application/x-ns-proxy-autoconfig pac
-application/x-object o
-application/x-ogg ogg
-application/x-oz-application oza
-application/x-perl pl pm
-application/x-redhat-package-manager rpm
-application/x-rx
-application/x-sh
-application/x-shar shar
-application/x-shellscript
-application/x-shockwave-flash swf swfl
-application/x-stuffit sit
-application/x-sv4cpio sv4cpio
-application/x-sv4crc sv4crc
-application/x-tar tar
-application/x-tcl
-application/x-tex
-application/x-tex-gf gf
-application/x-tex-pk pk PK
-application/x-texinfo texinfo texi
-application/x-trash ~ % bak old sik
-application/x-troff t tr roff
-application/x-troff-man man
-application/x-troff-me me
-application/x-troff-ms ms
-application/x-ustar ustar
-application/x-wais-source src
-application/x-wingz wz
-
-audio/basic au snd
-audio/midi mid midi
-audio/mpeg mpga mpega mp2 mp3
-audio/mpegurl m3u
-audio/prs.sid sid
-audio/x-aiff aif aiff aifc
-audio/x-gsm gsm
-audio/x-pn-realaudio ra rm ram
-audio/x-wav wav
-
-image/bitmap bmp
-image/gif gif
-image/ief ief
-image/jpeg jpeg jpg jpe
-image/pcx pcx
-image/png png
-image/tiff tiff tif
-image/vnd.wap.wbmp wbmp
-image/x-cmu-raster ras
-image/x-coreldraw cdr
-image/x-coreldrawpattern pat
-image/x-coreldrawtemplate cdt
-image/x-corelphotopaint cpt
-image/x-jng jng
-image/x-portable-anymap pnm
-image/x-portable-bitmap pbm
-image/x-portable-graymap pgm
-image/x-portable-pixmap ppm
-image/x-rgb rgb
-image/x-xbitmap xbm
-image/x-xpixmap xpm
-image/x-xwindowdump xwd
-
-inode/chardevice
-inode/blockdevice
-inode/directory-locked
-inode/directory
-inode/fifo
-inode/socket
-
-message/external-body
-message/news
-message/partial
-message/rfc822
-
-multipart/alternative
-multipart/appledouble
-multipart/digest
-multipart/mixed
-multipart/parallel
-
-text/comma-separated-values csv
-text/css css
-text/english
-text/html htm html xhtml
-text/mathml mml
-text/plain txt text diff
-text/richtext rtx
-text/tab-separated-values tsv
-text/vnd.wap.wml wml
-text/vnd.wap.wmlscript wmls
-text/xml xml
-text/x-c++hdr h++ hpp hxx hh
-text/x-c++src c++ cpp cxx cc
-text/x-chdr h
-text/x-crontab
-text/x-csh csh
-text/x-csrc c
-text/x-java java
-text/x-makefile
-text/x-moc moc
-text/x-pascal p pas
-text/x-setext etx
-text/x-sh sh
-text/x-tcl tcl tk
-text/x-tex tex ltx sty cls
-text/x-vcalendar vcs
-text/x-vcard vcf
-
-video/dl dl
-video/fli fli
-video/gl gl
-video/mpeg mpeg mpg mpe
-video/quicktime qt mov
-video/x-mng mng
-video/x-ms-asf asf asx
-video/x-msvideo avi
-video/x-sgi-movie movie
-
-x-world/x-vrml vrm vrml wrl
+++ /dev/null
-Patches from Kevin P. Fleming <kpfleming@backtobasicsmgmt.com>.
-
---- mrouted-3.9-beta3.orig/main.c~ 2004-03-10 19:00:38.000000000 -0700
-+++ mrouted-3.9-beta3.orig/main.c 2004-03-10 19:02:33.000000000 -0700
-@@ -1001,10 +1001,8 @@
- thyme->tm_min, thyme->tm_sec, now.tv_usec / 1000, msg);
- if (syserr == 0)
- fprintf(stderr, "\n");
-- else if (syserr < sys_nerr)
-- fprintf(stderr, ": %s\n", sys_errlist[syserr]);
- else
-- fprintf(stderr, ": errno %d\n", syserr);
-+ fprintf(stderr, ": %s\n", strerror(syserr));
- }
-
- /*
---- mrouted-3.9-beta3.orig/mrinfo.c~ 1998-02-28 20:05:20.000000000 -0700
-+++ mrouted-3.9-beta3.orig/mrinfo.c 2004-03-10 19:01:49.000000000 -0700
-@@ -159,10 +159,8 @@
- vfprintf(stderr, fmt, ap);
- if (syserr == 0)
- fprintf(stderr, "\n");
-- else if (syserr < sys_nerr)
-- fprintf(stderr, ": %s\n", sys_errlist[syserr]);
- else
-- fprintf(stderr, ": errno %d\n", syserr);
-+ fprintf(stderr, ": %s\n", strerror(syserr));
- }
-
- if (severity <= LOG_ERR)
---- mrouted-3.9-beta3.orig/mapper.c~ 1998-01-05 18:57:47.000000000 -0700
-+++ mrouted-3.9-beta3.orig/mapper.c 2004-03-10 19:02:04.000000000 -0700
-@@ -197,10 +197,8 @@
- vfprintf(stderr, fmt, ap);
- if (syserr == 0)
- fprintf(stderr, "\n");
-- else if (syserr < sys_nerr)
-- fprintf(stderr, ": %s\n", sys_errlist[syserr]);
- else
-- fprintf(stderr, ": errno %d\n", syserr);
-+ fprintf(stderr, ": %s\n", strerror(syserr));
- }
-
- if (severity <= LOG_ERR)
+++ /dev/null
---- netkit-telnet-0.17/configure Thu Apr 11 10:40:58 2002
-+++ FIXEDnetkittelnet/configure Thu Apr 11 10:39:59 2002
-@@ -78,7 +78,6 @@
- for TRY in egcs gcc g++ CC c++ cc; do
- (
- $TRY __conftest.c -o __conftest || exit 1;
-- ./__conftest || exit 1;
- ) >/dev/null 2>&1 || continue;
- CC=$TRY
- break;
-@@ -94,7 +93,6 @@
- echo -n 'Checking if C compiler works... '
- if (
- $CC __conftest.c -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo 'yes'
- else
-@@ -125,7 +123,6 @@
- for TRY in egcs gcc g++ CC c++ cc; do
- (
- $TRY __conftest.cc -o __conftest || exit 1;
-- ./__conftest || exit 1;
- ) >/dev/null 2>&1 || continue;
- CXX=$TRY
- break;
-@@ -141,7 +138,6 @@
- echo -n 'Checking if C++ compiler works... '
- if (
- $CXX __conftest.cc -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo 'yes'
- else
-@@ -278,13 +274,11 @@
- EOF
- if (
- $CXX $CXXFLAGS __conftest.cc -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo 'yes'
- else
- if (
- $CXX $CXXFLAGS -D__USE_BSD_SIGNAL __conftest.cc -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo '-D__USE_BSD_SIGNAL'
- CFLAGS="$CFLAGS -D__USE_BSD_SIGNAL"
-@@ -292,6 +286,7 @@
- else
- echo 'no'
- echo 'This package needs BSD signal semantics to run.'
-+ echo "$CXX $CXXFLAGS -D__USE_BSD_SIGNAL __conftest.cc -o __conftest failed"
- rm -f __conftest*
- exit
- fi
-@@ -330,31 +325,6 @@
- echo 'no'
- fi
- fi
--
--if [ x$NCURSES != x ]; then
-- LIBTERMCAP=-lncurses
--else
-- echo -n 'Checking for traditional termcap... '
--cat <<EOF >__conftest.cc
--#include <stdio.h>
--#include <termcap.h>
--int main(void) {
-- tgetent(NULL, NULL); return 0;
--}
--
--EOF
-- if (
-- $CXX $CXXFLAGS __conftest.cc -ltermcap -o __conftest || exit 1
-- ) >/dev/null 2>&1; then
-- echo '-ltermcap'
-- LIBTERMCAP=-ltermcap
-- else
-- echo 'not found'
-- echo 'This package needs termcap to run.'
-- rm -f __conftest*
-- exit
-- fi
--fi
- rm -f __conftest*
-
- ##################################################
-@@ -468,7 +438,6 @@
- else
- if (
- $CXX $CXXFLAGS -D_GNU_SOURCE __conftest.cc -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo '-D_GNU_SOURCE'
- CFLAGS="$CFLAGS -D_GNU_SOURCE"
-@@ -501,20 +470,17 @@
- EOF
- if (
- $CXX $CXXFLAGS __conftest.cc $LIBBSD -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo 'ok'
- else
- if (
- $CXX $CXXFLAGS __conftest.cc -lsnprintf $LIBBSD -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo '-lsnprintf'
- LIBS="$LIBS -lsnprintf"
- else
- if (
- $CXX $CXXFLAGS __conftest.cc -ldb $LIBBSD -o __conftest || exit 1
-- ./__conftest || exit 1
- ) >/dev/null 2>&1; then
- echo '-ldb'
- LIBS="$LIBS -ldb"
-diff -urN netkit-telnet-0.17/telnetd/state.c netkit-telnet-0.17-dm/telnetd/state.c
---- netkit-telnet-0.17/telnetd/state.c 1999-12-12 11:41:44.000000000 -0800
-+++ netkit-telnet-0.17-dm/telnetd/state.c 2003-07-23 19:20:38.000000000 -0700
-@@ -43,10 +43,10 @@
-
- static int envvarok(char *varp);
-
--static unsigned char doopt[] = { IAC, DO, '%', 'c', 0 };
--static unsigned char dont[] = { IAC, DONT, '%', 'c', 0 };
--unsigned char will[] = { IAC, WILL, '%', 'c', 0 };
--unsigned char wont[] = { IAC, WONT, '%', 'c', 0 };
-+//static unsigned char doopt[] = { IAC, DO, '%', 'c', 0 };
-+//static unsigned char dont[] = { IAC, DONT, '%', 'c', 0 };
-+//unsigned char will[] = { IAC, WILL, '%', 'c', 0 };
-+//unsigned char wont[] = { IAC, WONT, '%', 'c', 0 };
-
- /*
- * Buffer for sub-options, and macros
-@@ -422,7 +422,7 @@
- set_his_want_state_will(option);
- do_dont_resp[option]++;
- }
-- netoprintf((char *)doopt, option);
-+ netoprintf( "%c%c%c", IAC, DO, option );
-
- DIAG(TD_OPTIONS, printoption("td: send do", option));
- }
-@@ -632,7 +632,7 @@
- set_his_want_state_wont(option);
- do_dont_resp[option]++;
- }
-- netoprintf((char *) dont, option);
-+ netoprintf ( "%c%c%c", IAC, DONT, option );
-
- DIAG(TD_OPTIONS, printoption("td: send dont", option));
- }
-@@ -769,7 +769,7 @@
- set_my_want_state_will(option);
- will_wont_resp[option]++;
- }
-- netoprintf((char *) will, option);
-+ netoprintf( "%c%c%c", IAC, WILL, option);
-
- DIAG(TD_OPTIONS, printoption("td: send will", option));
- }
-@@ -917,7 +917,7 @@
- set_my_want_state_wont(option);
- will_wont_resp[option]++;
- }
-- netoprintf((char *)wont, option);
-+ netoprintf( "%c%c%c", IAC, WONT, option);
-
- DIAG(TD_OPTIONS, printoption("td: send wont", option));
- }
+++ /dev/null
-diff -urN net-snmp-5.1-dist/agent/mibgroup/host/hr_system.c net-snmp-5.1/agent/mibgroup/host/hr_system.c
---- net-snmp-5.1-dist/agent/mibgroup/host/hr_system.c 2003-02-28 22:35:13.000000000 -0600
-+++ net-snmp-5.1/agent/mibgroup/host/hr_system.c 2004-03-31 22:06:05.000000000 -0600
-@@ -286,7 +286,11 @@
- current user */
- if (kill(utmp_p->ut_pid, 0) == -1 && errno == ESRCH) {
- utmp_p->ut_type = DEAD_PROCESS;
-+#if HAVE_UTMPX_H
- pututxline(utmp_p);
-+#else
-+ pututline(utmp_p);
-+#endif
- continue;
- }
- ++total;
-diff -urN net-snmp-5.1-dist/configure.in net-snmp-5.1/configure.in
---- net-snmp-5.1-dist/configure.in 2004-03-31 21:59:14.000000000 -0600
-+++ net-snmp-5.1/configure.in 2004-03-31 22:06:05.000000000 -0600
-@@ -1865,13 +1865,8 @@
- if test $cross_compiling = yes; then
- if test $with_endianness = "big"; then
- AC_DEFINE(WORDS_BIGENDIAN)
-- elif test -z $with_endianness; then
-- AC_MSG_ERROR([You are cross-compiling, but you have not specified the target's endianness])
- fi
- else
-- if test $with_endianness; then
-- AC_MSG_ERROR([Endianness has been specified, but you are not cross-compiling.])
-- fi
- AC_C_BIGENDIAN
- fi
-
+++ /dev/null
-#!/bin/sh -e
-#
-# Original version by Robert Leslie
-# <rob@mars.org>, edited by iwj and cs
-# Modified for openvpn by Alberto Gonzalez Iniesta <agi@agi.as>
-# Modified for restarting / starting / stopping single tunnels by Richard Mueller <mueller@teamix.net>
-
-test $DEBIAN_SCRIPT_DEBUG && set -v -x
-
-DAEMON=/usr/sbin/openvpn
-CONFIG_DIR=/etc/openvpn
-test -x $DAEMON || exit 0
-test -d $CONFIG_DIR || exit 0
-
-start_vpn () {
- $DAEMON --daemon --writepid /var/run/openvpn.$NAME.pid \
- --config $CONFIG_DIR/$NAME.conf --cd $CONFIG_DIR || echo -n " FAILED->"
- echo -n " $NAME"
-}
-stop_vpn () {
- kill `cat $PIDFILE` || true
- rm $PIDFILE
-}
-
-case "$1" in
-start)
- echo -n "Starting openvpn:"
-
- if test -z $2 ; then
- for CONFIG in `cd $CONFIG_DIR; ls *.conf 2> /dev/null`; do
- NAME=${CONFIG%%.conf}
- start_vpn
- done
- else
- if test -e $CONFIG_DIR/$2.conf ; then
- NAME=$2
- start_vpn
- else
- echo -n " No such VPN: $2"
- fi
- fi
- echo "."
-
- ;;
-stop)
- echo -n "Stopping openvpn:"
-
- if test -z $2 ; then
- for PIDFILE in `ls /var/run/openvpn.*.pid 2> /dev/null`; do
- NAME=`echo $PIDFILE | cut -c18-`
- NAME=${NAME%%.pid}
- stop_vpn
- echo -n " $NAME"
- done
- else
- if test -e /var/run/openvpn.$2.pid ; then
- PIDFILE=`ls /var/run/openvpn.$2.pid 2> /dev/null`
- NAME=`echo $PIDFILE | cut -c18-`
- NAME=${NAME%%.pid}
- stop_vpn
- echo -n " $NAME"
- else
- echo -n " No such VPN: $2"
- fi
- fi
- echo "."
- ;;
-# We only 'reload' for running VPNs. New ones will only start with 'start' or 'restart'.
-reload|force-reload)
- echo -n "Reloading openvpn:"
- for PIDFILE in `ls /var/run/openvpn.*.pid 2> /dev/null`; do
- NAME=`echo $PIDFILE | cut -c18-`
- NAME=${NAME%%.pid}
-# If openvpn if running under a different user than root we'll need to restart
- if egrep '^( |\t)*user' $CONFIG_DIR/$NAME.conf > /dev/null 2>&1 ; then
- stop_vpn
- sleep 1
- start_vpn
- echo -n "(restarted)"
- else
- kill -HUP `cat $PIDFILE` || true
-# start-stop-daemon --stop --signal HUP --quiet --oknodo \
-# --exec $DAEMON --pidfile $PIDFILE
- echo -n " $NAME"
- fi
- done
- echo "."
- ;;
-
-restart)
- $0 stop $2
- sleep 1
- $0 start $2
- ;;
-*)
- echo "Usage: $0 {start|stop|reload|restart|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# vim:set ai et sts=2 sw=2 tw=0:
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-HAVE_DOT_CONFIG=y
-
-#
-# General Configuration
-#
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_FEATURE_DEVFS=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_SELINUX is not set
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-CONFIG_LFS=y
-USING_CROSS_COMPILER=y
-CROSS_COMPILER_PREFIX="mipsel-uclibc-"
-EXTRA_CFLAGS_OPTIONS="-Os "
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-PREFIX="./_install"
-
-#
-# Archival Utilities
-#
-# CONFIG_AR is not set
-CONFIG_BUNZIP2=y
-# CONFIG_CPIO is not set
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-CONFIG_GUNZIP=y
-CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
-CONFIG_GZIP=y
-# CONFIG_RPM2CPIO is not set
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-# CONFIG_FEATURE_TAR_FROM is not set
-CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_COMPRESS is not set
-# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
-# CONFIG_UNCOMPRESS is not set
-# CONFIG_UNZIP is not set
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-# CONFIG_CAL is not set
-CONFIG_CAT=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-# CONFIG_CMP is not set
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_DF=y
-# CONFIG_DIRNAME is not set
-# CONFIG_DOS2UNIX is not set
-# CONFIG_DU is not set
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_EXPR=y
-CONFIG_FALSE=y
-# CONFIG_FOLD is not set
-CONFIG_HEAD=y
-# CONFIG_FEATURE_FANCY_HEAD is not set
-CONFIG_HOSTID=y
-# CONFIG_ID is not set
-CONFIG_INSTALL=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-# CONFIG_LOGNAME is not set
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_MKFIFO=y
-# CONFIG_MKNOD is not set
-CONFIG_MV=y
-# CONFIG_OD is not set
-# CONFIG_PRINTF is not set
-CONFIG_PWD=y
-# CONFIG_REALPATH is not set
-CONFIG_RM=y
-CONFIG_RMDIR=y
-# CONFIG_SEQ is not set
-# CONFIG_SHA1SUM is not set
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_SORT=y
-# CONFIG_STTY is not set
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-
-#
-# test (forced enabled for use with shell)
-#
-# CONFIG_FEATURE_TEST_64 is not set
-CONFIG_TOUCH=y
-# CONFIG_TR is not set
-CONFIG_TRUE=y
-# CONFIG_TTY is not set
-CONFIG_UNAME=y
-CONFIG_UNIQ=y
-# CONFIG_USLEEP is not set
-# CONFIG_UUDECODE is not set
-# CONFIG_UUENCODE is not set
-# CONFIG_WATCH is not set
-CONFIG_WC=y
-# CONFIG_WHO is not set
-# CONFIG_WHOAMI is not set
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls and more
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-# CONFIG_CHVT is not set
-CONFIG_CLEAR=y
-# CONFIG_DEALLOCVT is not set
-# CONFIG_DUMPKMAP is not set
-# CONFIG_LOADFONT is not set
-# CONFIG_LOADKMAP is not set
-# CONFIG_OPENVT is not set
-CONFIG_RESET=y
-# CONFIG_SETKEYCODES is not set
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-# CONFIG_READLINK is not set
-CONFIG_RUN_PARTS=y
-# CONFIG_START_STOP_DAEMON is not set
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_MATH=y
-# CONFIG_PATCH is not set
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-# CONFIG_FEATURE_FIND_MTIME is not set
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-# CONFIG_FEATURE_FIND_NEWER is not set
-# CONFIG_FEATURE_FIND_INUM is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-CONFIG_FEATURE_USE_INITTAB=y
-# CONFIG_FEATURE_INITRD is not set
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-# CONFIG_FEATURE_EXTRA_QUIET is not set
-# CONFIG_HALT is not set
-# CONFIG_POWEROFF is not set
-CONFIG_REBOOT=y
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-# CONFIG_USE_BB_PWD_GRP is not set
-# CONFIG_ADDGROUP is not set
-# CONFIG_DELGROUP is not set
-# CONFIG_ADDUSER is not set
-# CONFIG_DELUSER is not set
-# CONFIG_GETTY is not set
-# CONFIG_FEATURE_U_W_TMP is not set
-# CONFIG_LOGIN is not set
-# CONFIG_FEATURE_SECURETTY is not set
-CONFIG_PASSWD=y
-# CONFIG_SU is not set
-# CONFIG_SULOGIN is not set
-# CONFIG_VLOCK is not set
-
-#
-# Common options for adduser, deluser, login, su
-#
-# CONFIG_FEATURE_SHADOWPASSWDS is not set
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-CONFIG_CROND=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_CRONTAB=y
-# CONFIG_DC is not set
-# CONFIG_DEVFSD is not set
-# CONFIG_LAST is not set
-# CONFIG_HDPARM is not set
-# CONFIG_MAKEDEVS is not set
-# CONFIG_MT is not set
-# CONFIG_RX is not set
-CONFIG_STRINGS=y
-CONFIG_TIME=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-CONFIG_FEATURE_2_4_MODULES=y
-# CONFIG_FEATURE_2_6_MODULES is not set
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
-CONFIG_LSMOD=y
-CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y
-# CONFIG_MODPROBE is not set
-CONFIG_RMMOD=y
-# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set
-
-#
-# Networking Utilities
-#
-CONFIG_FEATURE_IPV6=y
-CONFIG_ARPING=y
-# CONFIG_FTPGET is not set
-# CONFIG_FTPPUT is not set
-# CONFIG_HOSTNAME is not set
-CONFIG_HTTPD=y
-# CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY is not set
-CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
-# CONFIG_FEATURE_HTTPD_SETUID is not set
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
-CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-CONFIG_FEATURE_IFCONFIG_HW=y
-CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
-# CONFIG_IFUPDOWN is not set
-# CONFIG_INETD is not set
-# CONFIG_IP is not set
-CONFIG_IPCALC=y
-CONFIG_FEATURE_IPCALC_FANCY=y
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_NAMEIF is not set
-CONFIG_NC=y
-CONFIG_NETSTAT=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_PING6=y
-CONFIG_FEATURE_FANCY_PING6=y
-CONFIG_ROUTE=y
-# CONFIG_TELNET is not set
-CONFIG_TELNETD=y
-# CONFIG_FEATURE_TELNETD_INETD is not set
-# CONFIG_TFTP is not set
-CONFIG_TRACEROUTE=y
-CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-CONFIG_FEATURE_WGET_IP6_LITERAL=y
-
-#
-# udhcp Server/Client
-#
-# CONFIG_UDHCPD is not set
-CONFIG_UDHCPC=y
-# CONFIG_FEATURE_UDHCP_SYSLOG is not set
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_PIDOF=y
-CONFIG_PS=y
-# CONFIG_RENICE is not set
-CONFIG_TOP=y
-FEATURE_CPU_USAGE_PERCENTAGE=y
-CONFIG_UPTIME=y
-CONFIG_SYSCTL=y
-
-#
-# Another Bourne-like Shell
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-# CONFIG_ASH_MATH_SUPPORT_64 is not set
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_CMDCMD=y
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-# CONFIG_HUSH is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
-CONFIG_FEATURE_COMMAND_EDITING=y
-CONFIG_FEATURE_COMMAND_HISTORY=15
-# CONFIG_FEATURE_COMMAND_SAVEHISTORY is not set
-CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
-# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_SH_FANCY_PROMPT=y
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-CONFIG_FEATURE_REMOTE_LOG=y
-CONFIG_FEATURE_IPC_SYSLOG=y
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
-CONFIG_LOGREAD=y
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-# CONFIG_FBSET is not set
-# CONFIG_FDFLUSH is not set
-# CONFIG_FDFORMAT is not set
-# CONFIG_FDISK is not set
-FDISK_SUPPORT_LARGE_DISKS=y
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_GETOPT is not set
-CONFIG_HEXDUMP=y
-# CONFIG_HWCLOCK is not set
-# CONFIG_LOSETUP is not set
-# CONFIG_MKSWAP is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-# CONFIG_SWAPONOFF is not set
-CONFIG_MOUNT=y
-CONFIG_NFSMOUNT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_MOUNT_FORCE=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-# CONFIG_FEATURE_MTAB_SUPPORT is not set
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
+++ /dev/null
-diff -urN busybox-dist/include/applets.h busybox/include/applets.h
---- busybox-dist/include/applets.h 2004-03-13 02:33:09.000000000 -0600
-+++ busybox/include/applets.h 2004-03-16 09:45:29.000000000 -0600
-@@ -313,6 +313,9 @@
- #ifdef CONFIG_KILLALL
- APPLET(killall, kill_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
- #endif
-+#ifdef CONFIG_KILLALL5
-+ APPLET(killall5, kill_main, _BB_DIR_USR_BIN, _BB_SUID_NEVER)
-+#endif
- #ifdef CONFIG_KLOGD
- APPLET(klogd, klogd_main, _BB_DIR_SBIN, _BB_SUID_NEVER)
- #endif
-diff -urN busybox-dist/include/usage.h busybox/include/usage.h
---- busybox-dist/include/usage.h 2004-03-13 02:33:09.000000000 -0600
-+++ busybox/include/usage.h 2004-03-16 09:45:29.000000000 -0600
-@@ -1389,6 +1389,13 @@
- #define killall_example_usage \
- "$ killall apache\n"
-
-+#define killall5_trivial_usage \
-+ ""
-+#define killall5_full_usage \
-+ ""
-+#define killall5_example_usage \
-+ ""
-+
- #define klogd_trivial_usage \
- "[-c n] [-n]"
- #define klogd_full_usage \
-diff -urN busybox-dist/procps/Config.in busybox/procps/Config.in
---- busybox-dist/procps/Config.in 2003-12-24 00:02:11.000000000 -0600
-+++ busybox/procps/Config.in 2004-03-16 09:45:29.000000000 -0600
-@@ -30,6 +30,11 @@
- specified commands. If no signal name is specified, SIGTERM is
- sent.
-
-+config CONFIG_KILLALL5
-+ bool "killall5"
-+ default n
-+ depends on CONFIG_KILL
-+
- config CONFIG_PIDOF
- bool "pidof"
- default n
-diff -urN busybox-dist/procps/kill.c busybox/procps/kill.c
---- busybox-dist/procps/kill.c 2004-03-15 02:29:03.000000000 -0600
-+++ busybox/procps/kill.c 2004-03-16 09:45:29.000000000 -0600
-@@ -34,6 +34,7 @@
-
- #define KILL 0
- #define KILLALL 1
-+#define KILLALL5 2
-
- extern int kill_main(int argc, char **argv)
- {
-@@ -47,6 +48,9 @@
- #else
- whichApp = KILL;
- #endif
-+#ifdef CONFIG_KILLALL5
-+ whichApp = (strcmp(bb_applet_name, "killall5") == 0)? KILLALL5 : whichApp;
-+#endif
-
- /* Parse any options */
- if (argc < 2)
-@@ -119,6 +123,20 @@
- }
-
- }
-+#ifdef CONFIG_KILLALL5
-+ else if (whichApp == KILLALL5) {
-+ procps_status_t * p;
-+ pid_t myPid=getpid();
-+ while ((p = procps_scan(0)) != 0) {
-+ if (p->pid != 1 && p->pid != myPid && p->pid != p->ppid) {
-+ if (kill(p->pid, signo) != 0) {
-+ bb_perror_msg( "Could not kill pid '%d'", p->pid);
-+ errors++;
-+ }
-+ }
-+ }
-+ }
-+#endif
- #ifdef CONFIG_KILLALL
- else {
- pid_t myPid=getpid();
+++ /dev/null
-diff -urN busybox-1.00-pre8/networking/telnetd.c busybox-1.00-pre8-openwrt/networking/telnetd.c
---- busybox-1.00-pre8/networking/telnetd.c 2004-02-22 03:45:57.000000000 -0600
-+++ busybox-1.00-pre8-openwrt/networking/telnetd.c 2004-03-05 01:32:57.000000000 -0600
-@@ -44,6 +44,8 @@
- #include <arpa/telnet.h>
- #include <ctype.h>
- #include <sys/syslog.h>
-+#include <net/if.h>
-+
-
- #include "busybox.h"
-
-@@ -384,11 +386,13 @@
- int portnbr = 23;
- #endif /* CONFIG_FEATURE_TELNETD_INETD */
- int c;
-+ char *interface_name = NULL;
-+ struct ifreq interface;
- static const char options[] =
- #ifdef CONFIG_FEATURE_TELNETD_INETD
-- "f:l:";
--#else /* CONFIG_EATURE_TELNETD_INETD */
-- "f:l:p:";
-+ "i:f:l:";
-+#else /* CONFIG_FEATURE_TELNETD_INETD */
-+ "i:f:l:p:";
- #endif /* CONFIG_FEATURE_TELNETD_INETD */
- int maxlen, w, r;
-
-@@ -403,6 +407,9 @@
- case 'f':
- issuefile = strdup (optarg);
- break;
-+ case 'i':
-+ interface_name = strdup(optarg);
-+ break;
- case 'l':
- loginpath = strdup (optarg);
- break;
-@@ -442,6 +449,13 @@
- sa.sin_family = AF_INET;
- sa.sin_port = htons(portnbr);
-
-+ /* Set it to listen on the specified interface */
-+ if (interface_name) {
-+ strncpy(interface.ifr_ifrn.ifrn_name, interface_name, IFNAMSIZ);
-+ (void)setsockopt(master_fd, SOL_SOCKET,
-+ SO_BINDTODEVICE, &interface, sizeof(interface));
-+ }
-+
- if (bind(master_fd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
- bb_perror_msg_and_die("bind");
- }
+++ /dev/null
-diff -ur busybox.orig/networking/Config.in busybox/networking/Config.in
---- busybox.orig/networking/Config.in 2004-09-23 22:08:46.000000000 +0200
-+++ busybox/networking/Config.in 2004-10-31 20:09:54.622922408 +0100
-@@ -492,7 +492,7 @@
- config CONFIG_TELNETD
- bool "telnetd"
- default n
-- select CONFIG_LOGIN
-+ #select CONFIG_LOGIN
- help
- A daemon for the TELNET protocol, allowing you to log onto the host
- running the daemon. Please keep in mind that the TELNET protocol
+++ /dev/null
-/etc/chilli.conf
+++ /dev/null
-Package: chillispot
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a wireless access point controller
-Depends: kmod-tun
+++ /dev/null
-#!/bin/sh
-
-case $1 in
- start)
- insmod tun >/dev/null 2>&1
- [ -d /var/run ] || mkdir -p /var/run
- /usr/sbin/chilli
- ;;
- stop)
- [ -f /var/run/chilli.pid ] && kill $(cat /var/run/chilli.pid) >/dev/null 2>&1
- ;;
- *)
- echo "usage: $0 (start|stop)"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-/etc/dhcp-fwd.conf
+++ /dev/null
-Package: dhcp-fwd
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a DHCP relay agent
+++ /dev/null
-## $Id$
-
-## This file contains a sample configuration for the network shown
-## below:
-##
-## -------------- ---------- -------------
-## | DHCP Server | | | | |
-## | 192.168.8.66 |------<eth1>| dhcp-fwd |<eth2>------| Clients |
-## | | | | | |
-## -------------- ---------- -------------
-##
-## By default, the dhcp-fwd agent looks at /etc/dhcp-fwd.conf
-## for this file. By using the '-c' option when calling dhcp-fwd, this
-## path can be changed.
-
-
-######### ENVIRONMENT SETTINGS #########
-####
-###
-## The server will drop its privileges and goes into a chroot-jail
-## after doing its initialization. The following parameters are
-## defining the needed parameters:
-
-## User and group names/ids. It can be a numeric id or a resolvable
-## alphanumeric-name.
-##
-## WARNING: when compiled with dietlibc the user-/group-names must be
-## resolvable by files-NSS. LDAP or NIS NSS will not work so
-## the numeric ids must be used
-user daemon
-group daemon
-
-## chroot() path
-chroot /var/run/dhcp-fwd
-
-## Logfile and loglevel. The logfile-location is relatively to the
-## directory where dhcp-fwd was started and not to the chroot-directory.
-##
-## The loglevel option is not supported yet.
-logfile /var/log/dhcp-fwd.log
-loglevel 1
-
-## SysV pidfile; contains the PID of the daemon-process and will be
-## written with root-privileges
-pidfile /var/run/dhcp-fwd.pid
-
-
-## Set limit for resources. When using much interfaces or servers
-## below you will need to increase some values. Same holds when not
-## using dietlibc. Use '-1' as the value to disable the upper limit
-## for the given resource.
-##
-## Look into /proc/<pid>/status to find out the real usage of the
-## resources.
-ulimit core 0
-ulimit stack 64K
-ulimit data 32K
-ulimit rss 200K
-ulimit nproc 0
-ulimit nofile 0
-ulimit as 0
-
-
-######### INTERFACE SETTINGS #########
-####
-###
-## The interface where the forwarder listens for messages. There must
-## be specified BOTH the server-side and client-side interfaces!
-##
-## Each interface will be identified by its system-wide name
-## (e.g. eth0). After this it must be told whether there are
-## clients and servers, and if it is allowed to send broadcast
-## messages to clients. The bcast flags will be IGNORED when
-## forwarding messages to servers.
-
-# IFNAME clients servers bcast
-if eth2 true false true
-if eth1 false true true
-
-
-## Each interface can be given an RFC 3046 agent ID. The 'name' config
-## option sets this value; if an interface is not specified here, the
-## IFNAME will be assumed.
-
-# IFNAME agent-id
-name eth2 ws-c
-
-
-## Each interface can be given an specific IP to be filled into the
-## 'giaddr' field.
-##
-## BEWARE: because the outgoing DHCP message will contain the "normal" IP
-## address of the outgoing-interface in its IP-header, some additional
-## work in the system must be done. You can e.g. add an iptables rule to
-## the 'nat' table similarly to this:
-##
-## | Chain POSTROUTING (policy ACCEPT)
-## | target prot opt source destination
-## | SNAT udp -- 192.168.0.6 192.168.8.66 udp spt:68 dpt:67 to:192.168.2.255
-
-# ip eth0 192.168.2.255
-
-
-######### SERVER SETTINGS #########
-####
-###
-## Definitions of the servers. There must be told the type ('ip' or
-## 'bcast') and the address. When using 'ip', the address is a non-bcast
-## IPv4 address (dotted, DNS-names are NOT supported); and when using
-## 'bcast' servers, the address is an IFNAME.
-
-# TYPE address
-server ip 192.168.8.66
-#server bcast eth1
+++ /dev/null
-#!/bin/sh
-
-case $1 in
- start)
- [ -d /var/log ] || mkdir -p /var/log
- [ -d /var/run/dhcp-wfd ] || mkdir -p /var/run/dhcp-fwd
- dhcp-fwd
- ;;
- stop)
- [ -f /var/run/dhcpd-fwd.pid ] && kill $(cat /var/run/dhcpd-fwd.pid) 2>/dev/null
- ;;
- *)
- echo "usage: $0 (start|stop)"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-/etc/init.d/S51dropbear
+++ /dev/null
-Package: dropbear
-Version: 0.44-1
-Architecture: mipsel
-Maintainer: Leigh Dyer <lsd@linuxgamers.net>
-Source: http://matt.ucc.asn.au/dropbear/dropbear-0.44.tar.bz2
-Section: net
-Priority: optional
-Depends:
-Description: Lightweight SSH client and server system
+++ /dev/null
-#!/bin/sh
-echo
-mkdir -p /etc/dropbear
-[ ! -f /etc/dropbear/dropbear_dss_host_key ] && {
-/tmp/dropbearkey -t dss -f /etc/dropbear/dropbear_dss_host_key
-}
-rm /tmp/dropbearkey
-[ ! -f /etc/passwd ] && {
-cat > /etc/passwd << EOF
-root::0:0:root:/tmp:/bin/ash
-EOF
-cat > /etc/shells << EOF
-/bin/ash
-EOF
-cat > /etc/group << EOF
-root:*:0:
-EOF
-passwd
-}
-
-cat << EOF
-==========================================
-dropbear is now configured to run on boot.
-==========================================
-To start it now, run the following command:
-
-/usr/bin/dropbear
-
-EOF
+++ /dev/null
-#!/bin/sh
-/usr/bin/dropbear
+++ /dev/null
-diff -bBurN dropbear-0.44/options.h dropbear-0.44-openwrt/options.h
---- dropbear-0.44/options.h 2005-01-03 10:24:03.000000000 +0100
-+++ dropbear-0.44-openwrt/options.h 2005-01-14 13:19:38.902029040 +0100
-@@ -139,7 +139,7 @@
- * will prevent Dropbear from blocking on the device. This could
- * however significantly reduce the security of your ssh connections
- * if the PRNG state becomes simpler. */
--#define DROPBEAR_RANDOM_DEV "/dev/random"
-+#define DROPBEAR_RANDOM_DEV "/dev/urandom"
-
- /* prngd must be manually set up to produce output */
- /*#define DROPBEAR_PRNGD_SOCKET "/var/run/dropbear-rng"*/
-@@ -188,7 +188,7 @@
- #define DROPBEAR_VERSION "0.44"
- #endif
-
--#define LOCAL_IDENT "SSH-2.0-dropbear_" DROPBEAR_VERSION
-+#define LOCAL_IDENT "SSH-2.0-OpenSSH"
- #define PROGNAME "dropbear"
-
- /* Spec recommends after one hour or 1 gigabyte of data. One hour
+++ /dev/null
-/etc/fprobe.conf
+++ /dev/null
-Package: fprobe
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a NetFlow probe
-Depends: libpcap, libpthread
+++ /dev/null
-# Interface to listen on
-IFNAME=any
-
-# NetFlow collector (host:port)
-REMOTE=192.168.1.100:2055
-
-# Maximum log level (0=EMERG, 1=ALERT, 2=CRIT, 3=ERR, 4=WARNING, 5=NOTICE, 6=INFO, 7=DEBUG)
-LOG_LEVEL=3
+++ /dev/null
-#!/bin/sh
-
-DEFAULT=/etc/fprobe.conf
-OPTIONS=""
-[ -f $DEFAULT ] && . $DEFAULT
-[ -n "$IFNAME" ] && OPTIONS="$OPTIONS -i $IFNAME"
-[ -n "$LOG_LEVEL" ] && OPTIONS="$OPTIONS -v $LOG_LEVEL"
-[ -n "$REMOTE" ] && OPTIONS="$OPTIONS $REMOTE"
-
-case $1 in
- start)
- [ -d /var/run ] || mkdir -p /var/run
- /usr/sbin/fprobe $OPTIONS
- ;;
- stop)
- [ -f /var/run/fprobe.pid ] && kill $(cat /var/run/fprobe.pid) >/dev/null 2>&1
- ;;
- *)
- echo "usage: $0 (start|stop)"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-Package: ip6tables
-Architecture: mipsel
-Version: 1.2.11-1
-Section: net
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: Embedded in the main OpenWrt buildroot
-Depends: kmod-ipv6, kmod-ipt6
-Description: Linux kernel 2.4+ IPv6 packet filter administration tools
+++ /dev/null
-Package: ip
-Architecture: mipsel
-Version: 2.0
-Section: net
-Priority: optional
-Maintainer: Gerry Rozema <gerryr@rozeware.bc.ca>
-Source: http://ftp.debian.org/debian/pool/main/i/iproute/iproute-20010824.orig.tar.gz
-Depends:
-Description: iproute2 stuff
+++ /dev/null
-Package: tc
-Architecture: mipsel
-Version: 2.0
-Section: net
-Priority: optional
-Maintainer: Gerry Rozema <gerryr@rozeware.bc.ca>
-Source: http://ftp.debian.org/debian/pool/main/i/iproute/iproute-20010824.orig.tar.gz
-Depends: kmod-sched
-Description: iproute2 stuff
+++ /dev/null
-Package: kmod-ipt6
-Architecture: mipsel
-Version: 2.4.20-1
-Section: kernel
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: Embedded in the main OpenWrt buildroot
-Depends: kmod-ipv6, ip6tables
-Description: ip6tables kernel modules
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-ipt6
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/net/ipv6/netfilter/*.o \
-
- install -m0755 -d $(MY_INSTALL_DIR)/lib/modules/2.4.20/ipt6
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/net/ipv6/netfilter/*.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/ipt6/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
+++ /dev/null
-Package: kmod-ipt6
-Architecture: mipsel
-Version: 2.4.20-1
-Section: kernel
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: Embedded in the main OpenWrt buildroot
-Depends: kmod-ipv6, ip6tables
-Description: ip6tables kernel modules
+++ /dev/null
-Package: kmod-ipv6
-Architecture: mipsel
-Version: 2.4.20-1
-Section: kernel
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: Embedded in the main OpenWrt buildroot
-Depends:
-Description: Kernel modules for the IPv6 protocol
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-ipv6
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/net/ipv6/ipv6.o \
-
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/net/ipv6/ipv6.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
+++ /dev/null
-Package: kmod-ipv6
-Architecture: mipsel
-Version: 2.4.20-1
-Section: kernel
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: Embedded in the main OpenWrt buildroot
-Depends:
-Description: Kernel modules for the IPv6 protocol
+++ /dev/null
-Package: kmod-nfs
-Priority: optional
-Section: kernel
-Version: 2.4.20-1
-Architecture: mipsel
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: NFS kernel modules
+++ /dev/null
-#!/bin/sh
-cat << EOF
-
-
-Using the nfs modules:
- insmod sunrpc
- insmod lockd
- insmod nfs
- mount server:/mnt /mnt -o nolock
-
-If you do not specify nolock the mount process will hang
-until rpciod is killed. (killall -9 rpciod)
-
-- press enter -
-EOF
-read
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-nfs
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/fs/lockd/lockd.o \
- modules/2.4.20/kernel/fs/nfs/nfs.o \
- modules/2.4.20/kernel/net/sunrpc/sunrpc.o \
-
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/fs/lockd/*.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/fs/nfs/*.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/net/sunrpc/*.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
+++ /dev/null
-Package: kmod-ppp-async
-Priority: optional
-Section: kernel
-Version: 2.4.20-1
-Architecture: mipsel
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: PPP async serial channel driver kernel module
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-ppp-async
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/drivers/net/ppp_async.o \
-
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/drivers/net/ppp_async.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
+++ /dev/null
-Package: kmod-ppp-mppe-mppc
-Priority: optional
-Section: kernel
-Version: 2.4.20-1
-Architecture: mipsel
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: Microsoft PPP compression/encryption (MPPC/MPPE) kernel module
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-ppp-mppe-mppc
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/drivers/net/ppp_mppe_mppc.o \
-
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/drivers/net/ppp_mppe_mppc.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
-
+++ /dev/null
-Package: kmod-sched
-Priority: optional
-Section: kernel
-Version: 2.4.20-1
-Architecture: mipsel
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: Traffic Control (TC) kernel modules
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-sched
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/net/sched/*.o \
-
- install -m0755 -d $(MY_INSTALL_DIR)/lib/modules/2.4.20/sched
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/net/sched/*.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/sched/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
+++ /dev/null
-Package: kmod-tun
-Priority: optional
-Section: kernel
-Version: 2.4.20-1
-Architecture: mipsel
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: Universal TUN/TAP device driver kernel module
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-PACKAGE := kmod-tun
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib/
- bzcat $(TOPDIR)/openwrt-kmodules.tar.bz2 | tar -C $(MY_INSTALL_DIR)/lib/ -xvf - \
- modules/2.4.20/kernel/drivers/net/tun.o \
-
- mv -f \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel/drivers/net/tun.o \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/
-
- rm -rf \
- $(MY_INSTALL_DIR)/lib/modules/2.4.20/kernel
-
-
-clean:
-
+++ /dev/null
-Package: libmatrixssl
-Priority: optional
-Section: libs
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: an embedded SSL implementation
-Depends: libpthread
+++ /dev/null
-Package: libpcap
-Priority: optional
-Section: libs
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a low-level packet capture library
+++ /dev/null
-Package: libpthread
-Priority: optional
-Section: libs
-Version: 0.9.27-1
-Architecture: mipsel
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: POSIX threads library
+++ /dev/null
-#!/usr/bin/make -f
-
-ifeq ($(strip $(TOPDIR)),)
-TOPDIR := $(shell pwd)/../../../..
-endif
-
-
-# variables extracted from $(TOPDIR)/Makefile
-ARCH:= mipsel
-STAGING_DIR=$(TOPDIR)/build_$(ARCH)/staging_dir
-REAL_GNU_TARGET_NAME=$(ARCH)-linux-uclibc
-TARGET_CROSS=$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-
-STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note
-# could be better if replaced with:
-#include $(TOPDIR)/Config
-
-
-PACKAGE := libpthread
-
-MY_INSTALL_DIR := /tmp/$(PACKAGE)
-
-
-build:
-
-
-install:
- rm -rf $(MY_INSTALL_DIR)
- install -m0755 -d $(MY_INSTALL_DIR)/lib
- install -m0755 $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libpthread-0.9.27.so $(MY_INSTALL_DIR)/lib
- $(STRIP) $(MY_INSTALL_DIR)/lib/libpthread*.so*
- ln -fs libpthread-0.9.27.so $(MY_INSTALL_DIR)/lib/libpthread.so.0
-
-clean:
-
+++ /dev/null
-Package: ntpclient
-Architecture: mipsel
-Version: 2003.194-1
-Section: utils
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: http://doolittle.faludi.com/ntpclient/
-Depends:
-Description: utility to setting system time from NTP server
+++ /dev/null
-/etc/ssh_config
+++ /dev/null
-Package: openssh-client
-Priority: optional
-Version: 3.8p1-1
-Architecture: mipsel
-Maintainer: below0
-Section: net
-Depends: zlib libssl
-Source: Embedded in the main OpenWrt buildroot
-Description: The OpenSSH client. Allows for access to remote systems via the SSH protocol.
- Includes: ssh, scp
-
-
+++ /dev/null
-Package: openssh-client-extras
-Priority: optional
-Version: 3.8p1-1
-Architecture: mipsel
-Maintainer: below0
-Section: net
-Depends: openssh-client
-Source: Embedded in the main OpenWrt buildroot
-Description: Various optional OpenSSH client tools.
- Includes: ssh-add, ssh-agent, ssh-keyscan, ssk-keysign
-
-
+++ /dev/null
-#!/bin/sh
-
-# Make sure password and group databases exist
-if [ ! -f /etc/passwd ]; then
- echo -e "root::0:0::/tmp:/bin/sh\nnobody:x:65534:65534:nobody:/tmp:/bin/sh\nsshd:x:100:65534:sshd:/var:/bin/false\n" > /etc/passwd
- [ -f /etc/group ] || echo -e "root:x:0:\nnogroup:x:65534:\n" > /etc/group
- echo "\n\nNOTICE: SSH requires proper root password to be configured, set it now."
- passwd
-fi
-
+++ /dev/null
-# $OpenBSD: ssh_config,v 1.19 2003/08/13 08:46:31 markus Exp $
-
-# This is the ssh client system-wide configuration file. See
-# ssh_config(5) for more information. This file provides defaults for
-# users, and the values can be changed in per-user configuration files
-# or on the command line.
-
-# Configuration data is parsed as follows:
-# 1. command line options
-# 2. user-specific file
-# 3. system-wide file
-# Any configuration value is only changed the first time it is set.
-# Thus, host-specific definitions should be at the beginning of the
-# configuration file, and defaults at the end.
-
-# Site-wide defaults for various options
-
-# Host *
-# ForwardAgent no
-# ForwardX11 no
-# RhostsRSAAuthentication no
-# RSAAuthentication yes
-# PasswordAuthentication yes
-# HostbasedAuthentication no
-# BatchMode no
-# CheckHostIP yes
-# AddressFamily any
-# ConnectTimeout 0
-# StrictHostKeyChecking ask
-# IdentityFile ~/.ssh/identity
-# IdentityFile ~/.ssh/id_rsa
-# IdentityFile ~/.ssh/id_dsa
-# Port 22
-# Protocol 2,1
-# Cipher 3des
-# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
-# EscapeChar ~
+++ /dev/null
---- openssh-3.6.1p1/Makefile.in.orig 2003-03-20 17:34:34.000000000 -0700
-+++ openssh-3.6.1p1/Makefile.in 2003-04-25 17:09:00.000000000 -0600
-@@ -27,7 +27,7 @@
- RAND_HELPER=$(libexecdir)/ssh-rand-helper
- PRIVSEP_PATH=@PRIVSEP_PATH@
- SSH_PRIVSEP_USER=@SSH_PRIVSEP_USER@
--STRIP_OPT=@STRIP_OPT@
-+STRIP_OPT=
-
- PATHS= -DSSHDIR=\"$(sysconfdir)\" \
- -D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \
---- openssh-3.8p1/configure.ac.orig 2004-02-23 22:47:04.000000000 -0700
-+++ openssh-3.8p1/configure.ac 2004-03-19 01:41:47.000000000 -0700
-@@ -481,6 +481,9 @@
- [
- AC_MSG_RESULT(no)
- AC_MSG_ERROR([*** compiler cannot create working executables, check config.log ***])
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
- ]
- )
-
-@@ -632,6 +635,9 @@
- else
- AC_MSG_WARN([zlib version may have security problems])
- fi
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
- ]
- )
-
-@@ -696,6 +702,9 @@
- [
- AC_MSG_RESULT(no)
- AC_DEFINE(BROKEN_ONE_BYTE_DIRENT_D_NAME)
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
- ]
- )
-
-@@ -727,6 +736,9 @@
- [
- AC_MSG_RESULT(no)
- AC_MSG_ERROR([** Incomplete or missing s/key libraries.])
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
- ])
- fi
- ]
-@@ -840,7 +852,11 @@
- ],
- [AC_MSG_RESULT(yes)],
- [AC_DEFINE(BROKEN_SETRESUID)
-- AC_MSG_RESULT(not implemented)]
-+ AC_MSG_RESULT(not implemented)
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
-+ ]
- )
- ])
-
-@@ -854,7 +870,11 @@
- ],
- [AC_MSG_RESULT(yes)],
- [AC_DEFINE(BROKEN_SETRESGID)
-- AC_MSG_RESULT(not implemented)]
-+ AC_MSG_RESULT(not implemented)
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
-+ ]
- )
- ])
-
-@@ -890,6 +910,9 @@
- AC_MSG_RESULT(no)
- AC_DEFINE(BROKEN_SNPRINTF)
- AC_MSG_WARN([****** Your snprintf() function is broken, complain to your vendor])
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
- ]
- )
- fi
-@@ -963,7 +986,10 @@
- [
- AC_MSG_RESULT(no)
- AC_DEFINE(SSHD_ACQUIRES_CTTY)
-- ]
-+ ],
-+ [AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
-+ ]
- )
- fi
-
-@@ -1096,6 +1122,10 @@
- [
- AC_MSG_RESULT(not found)
- AC_MSG_ERROR(OpenSSL version header not found.)
-+ ],
-+ [
-+ ssl_header_ver="0x0090704fL (OpenSSL 0.9.7d 17 Mar 2004)"
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to $ssl_header_ver])
- ]
- )
-
-@@ -1129,6 +1159,10 @@
- [
- AC_MSG_RESULT(not found)
- AC_MSG_ERROR(OpenSSL library not found.)
-+ ],
-+ [
-+ ssl_header_ver="0x0090704fL (OpenSSL 0.9.7d 17 Mar 2004)"
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to $ssl_library_ver])
- ]
- )
-
-@@ -1148,7 +1182,11 @@
- AC_MSG_ERROR([Your OpenSSL headers do not match your library.
- Check config.log for details.
- Also see contrib/findssl.sh for help identifying header/library mismatches.])
-- ]
-+ ],
-+ [
-+ AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
-+ ]
- )
-
- # Some systems want crypt() from libcrypt, *not* the version in OpenSSL,
-@@ -1183,6 +1221,11 @@
- # Default to use of the rand helper if OpenSSL doesn't
- # seed itself
- USE_RAND_HELPER=yes
-+ ],
-+ [
-+ OPENSSL_SEEDS_ITSELF=yes
-+ AC_MSG_RESULT(yes)
-+ AC_MSG_WARN([Cannot run test when crosscompiling, defaulted to yes.])
- ]
- )
-
-@@ -1773,7 +1816,8 @@
- #else
- main() { exit(0); }
- #endif
-- ], [ true ], [ AC_DEFINE(BROKEN_SNPRINTF) ]
-+ ], [ true ], [ AC_DEFINE(BROKEN_SNPRINTF) ],
-+ [ true ]
- )
- fi
-
-@@ -1893,6 +1937,7 @@
- }
- ],
- [ ac_cv_have_accrights_in_msghdr="yes" ],
-+ [ ac_cv_have_accrights_in_msghdr="no" ],
- [ ac_cv_have_accrights_in_msghdr="no" ]
- )
- ])
-@@ -1917,7 +1962,8 @@
- }
- ],
- [ ac_cv_have_control_in_msghdr="yes" ],
-- [ ac_cv_have_control_in_msghdr="no" ]
-+ [ ac_cv_have_control_in_msghdr="no" ],
-+ [ ac_cv_have_control_in_msghdr="yes" ]
- )
- ])
- if test "x$ac_cv_have_control_in_msghdr" = "xyes" ; then
-@@ -2229,12 +2275,9 @@
- )
- fi
- fi
--AC_CHECK_FILE("/dev/ptc",
-- [
-- AC_DEFINE_UNQUOTED(HAVE_DEV_PTS_AND_PTC)
-- have_dev_ptc=1
-- ]
--)
-+AC_MSG_CHECKING([for "/dev/ptc"])
-+AC_MSG_RESULT(no)
-+have_dev_ptc=0
-
- # Options from here on. Some of these are preset by platform above
- AC_ARG_WITH(mantype,
-@@ -2329,15 +2372,8 @@
- fi
-
- # check for /etc/default/login and use it if present.
--AC_ARG_ENABLE(etc-default-login,
-- [ --disable-etc-default-login Disable using PATH from /etc/default/login [no]],,
--[
--AC_CHECK_FILE("/etc/default/login", [ external_path_file=/etc/default/login ])
--
--if test "x$external_path_file" = "x/etc/default/login"; then
-- AC_DEFINE(HAVE_ETC_DEFAULT_LOGIN)
--fi
--])
-+AC_MSG_CHECKING([for "/etc/default/login"])
-+AC_MSG_RESULT(no)
-
- dnl BSD systems use /etc/login.conf so --with-default-path= has no effect
- if test $ac_cv_func_login_getcapbool = "yes" -a \
---- openssh-3.8p1.orig/sshd_config Fri Sep 27 05:21:58 2002
-+++ openssh-3.8p1/sshd_config Mon Mar 17 14:55:00 2003
-@@ -89,5 +89,8 @@
- #Banner /some/path
- #VerifyReverseMapping no
-
-+ClientAliveInterval 15
-+ClientAliveCountMax 4
-+
- # override default of no subsystems
--Subsystem sftp /usr/libexec/sftp-server
-+Subsystem sftp /usr/sbin/sftp-server
---- openssh-3.6.1p1/S50sshd Fri Sep 27 05:21:58 2002
-+++ openssh-3.6.1p1/S50sshd Mon Mar 17 14:55:00 2003
-@@ -0,0 +1,64 @@
-+#!/bin/sh
-+#
-+# sshd Starts sshd.
-+#
-+
-+# Make sure the ssh-keygen progam exists
-+[ -f /usr/bin/ssh-keygen ] || exit 0
-+
-+# Check for the SSH1 RSA key
-+if [ ! -f /etc/ssh_host_key ] ; then
-+ echo Generating RSA Key...
-+ /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh_host_key -C '' -N ''
-+fi
-+
-+# Check for the SSH2 RSA key
-+if [ ! -f /etc/ssh_host_rsa_key ] ; then
-+ echo Generating RSA Key...
-+ /usr/bin/ssh-keygen -t rsa -f /etc/ssh_host_rsa_key -C '' -N ''
-+fi
-+
-+# Check for the SSH2 DSA key
-+if [ ! -f /etc/ssh_host_dsa_key ] ; then
-+ echo Generating DSA Key...
-+ echo THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
-+ echo
-+ /usr/bin/ssh-keygen -t dsa -f /etc/ssh_host_dsa_key -C '' -N ''
-+fi
-+
-+umask 077
-+
-+start() {
-+ echo -n "Starting sshd: "
-+ /usr/sbin/sshd
-+ touch /var/lock/sshd
-+ echo "OK"
-+}
-+stop() {
-+ echo -n "Stopping sshd: "
-+ killall sshd
-+ rm -f /var/lock/sshd
-+ echo "OK"
-+}
-+restart() {
-+ stop
-+ start
-+}
-+
-+case "$1" in
-+ start)
-+ start
-+ ;;
-+ stop)
-+ stop
-+ ;;
-+ restart|reload)
-+ restart
-+ ;;
-+ *)
-+ echo $"Usage: $0 {start|stop|restart}"
-+ exit 1
-+esac
-+
-+exit $?
-+
+++ /dev/null
-#!/bin/sh
-#
-# sshd Starts sshd.
-#
-
-mkdir -p /var/lock
-mkdir -p /var/empty
-chmod 600 /var/empty
-
-umask 077
-
-start() {
- echo -n "Starting sshd: "
- /usr/sbin/sshd
- touch /var/lock/sshd
- echo "OK"
-}
-stop() {
- echo -n "Stopping sshd: "
- killall sshd
- rm -f /var/lock/sshd
- echo "OK"
-}
-restart() {
- stop
- start
-}
-
-case "$1" in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart|reload)
- restart
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart}"
- exit 1
-esac
-
-exit $?
-
+++ /dev/null
-/etc/sshd_config
+++ /dev/null
-Package: openssh-server
-Priority: optional
-Version: 3.8p1-1
-Architecture: mipsel
-Maintainer: below0
-Section: net
-Depends: zlib libssl
-Source: Embedded in the main OpenWrt buildroot
-Description: The OpenSSH server daemon.
- Allows for access to the system via the SSH client.
- Includes: sshd, ssh-keygen
-
-
+++ /dev/null
-#!/bin/sh
-
-# Check for the SSH1 RSA key
-if [ ! -f /etc/ssh_host_key ] ; then
- echo Generating RSA Key...
- /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh_host_key -C '' -N ''
-fi
-
-# Check for the SSH2 RSA key
-if [ ! -f /etc/ssh_host_rsa_key ] ; then
- echo Generating RSA Key...
- /usr/bin/ssh-keygen -t rsa -f /etc/ssh_host_rsa_key -C '' -N ''
-fi
-
-# Check for the SSH2 DSA key
-if [ ! -f /etc/ssh_host_dsa_key ] ; then
- echo "Generating DSA Key... (Takes a few minutes)"
- /usr/bin/ssh-keygen -t dsa -f /etc/ssh_host_dsa_key -C '' -N ''
-fi
-
+++ /dev/null
-#!/bin/sh
-
-# Make sure password and group databases exist
-if [ ! -f /etc/passwd ]; then
- echo -e "root::0:0::/tmp:/bin/sh\nnobody:x:65534:65534:nobody:/tmp:/bin/sh\nsshd:x:100:65534:sshd:/var:/bin/false\n" > /etc/passwd
- [ -f /etc/group ] || echo -e "root:x:0:\nnogroup:x:65534:\n" > /etc/group
- echo "\n\nNOTICE: SSH requires proper root password to be configured, set it now."
- passwd
-fi
-
+++ /dev/null
-# $OpenBSD: sshd_config,v 1.68 2003/12/29 16:39:50 millert Exp $
-
-# This is the sshd server system-wide configuration file. See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options change a
-# default value.
-
-#Port 22
-#Protocol 2,1
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh_host_rsa_key
-#HostKey /etc/ssh_host_dsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 768
-
-# Logging
-#obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin yes
-#StrictModes yes
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile .ssh/authorized_keys
-
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication (via challenge-response)
-# and session processing. Depending on your PAM configuration, this may
-# bypass the setting of 'PasswordAuthentication' and 'PermitEmptyPasswords'
-#UsePAM no
-
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation yes
-#PermitUserEnvironment no
-#Compression yes
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10
-
-# no default banner path
-#Banner /some/path
-
-ClientAliveInterval 15
-ClientAliveCountMax 4
-
-# override default of no subsystems
-Subsystem sftp /usr/sbin/sftp-server
+++ /dev/null
-Package: openssh-sftp-client
-Priority: optional
-Version: 3.8p1-1
-Architecture: mipsel
-Maintainer: below0
-Section: net
-Depends: openssh-client
-Source: Embedded in the main OpenWrt buildroot
-Description: OpenSSH Secure FTP server.
- Includes: sftp-server
-
-
+++ /dev/null
-Package: openssh-sftp-server
-Priority: optional
-Version: 3.8p1-1
-Architecture: mipsel
-Maintainer: below0
-Section: net
-Depends: openssh-server
-Source: Embedded in the main OpenWrt buildroot
-Description: OpenSSH Secure FTP server.
- Includes: sftp-server
-
-
+++ /dev/null
-Package: libssl
-Priority: optional
-Version: 0.9.7d-1
-Architecture: mipsel
-Maintainer: below0
-Section: libs
-Source: Embedded in the main OpenWrt buildroot
-Description: OpenSSL libraries used for SSL encryption.
-
+++ /dev/null
---- openssl-0.9.7.orig/Configure
-+++ openssl-0.9.7/Configure
-@@ -1,4 +1,4 @@
--:
-+#!/usr/bin/perl
- eval 'exec perl -S $0 ${1+"$@"}'
- if $running_under_some_shell;
- ##
-@@ -373,6 +373,40 @@
- # assembler versions -- currently defunct:
- ##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:${alpha_asm}",
-
-+# Sane Linux configuration values, stolen from the Debian package....
-+"linux-alpha","gcc:-DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-alpha-ev4","gcc:-DTERMIO -O3 -mcpu=ev4 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-alpha-ev5","gcc:-DTERMIO -O3 -mcpu=ev5 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG DES_RISC1::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-freebsd-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-freebsd-i386", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-hppa","gcc:-DB_ENDIAN -DTERMIO -O2 -Wall::-D_REENTRANT::-ldl:BN_LLONG MD2_CHAR RC4_INDEX::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-hurd-i386","gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-ia64","gcc:-DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+#"linux-i386","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC",
-+"linux-i386","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-i386-i486","gcc:-DL_ENDIAN -DTERMIO -O3 -march=i486 -mcpu=i486 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-i386-i586","gcc:-DL_ENDIAN -DTERMIO -O3 -march=i586 -mcpu=i586 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-i386-i686/cmov","gcc:-DL_ENDIAN -DTERMIO -O3 -march=i686 -mcpu=i686 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-m68k","gcc:-DB_ENDIAN -DTERMIO -O2 -Wall::-D_REENTRANT::-ldl:BN_LLONG MD2_CHAR RC4_INDEX::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-mips", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-mipsel", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-netbsd-i386", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-netbsd-m68k", "gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-netbsd-sparc", "gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-openbsd-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-openbsd-i386", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-openbsd-mips","gcc:-O2 -DL_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-powerpc","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG DES_UNROLL DES_RISC2 DES_PTR MD2_CHAR RC4_INDEX::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-s390","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sh3", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sh4", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sh3eb", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sh4eb", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sparc","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sparc-v8","gcc:-DB_ENDIAN -DTERMIO -O3 -mcpu=v8 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-sparc-v9","gcc:-DB_ENDIAN -DTERMIO -O3 -mcpu=v9 -Wa,-Av8plus -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-+"linux-cris", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
- # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
- # bn86-elf.o file file since it is hand tweaked assembler.
- "linux-elf", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
---- openssl-0.9.7.orig/crypto/md5/asm/md5-sparcv9.S
-+++ openssl-0.9.7/crypto/md5/asm/md5-sparcv9.S
-@@ -72,14 +72,14 @@
- #define Dval R8
-
- #if defined(MD5_BLOCK_DATA_ORDER)
--# if defined(OPENSSL_SYSNAME_ULTRASPARC)
-+/*# if defined(OPENSSL_SYSNAME_ULTRASPARC)*/
- # define LOAD lda
- # define X(i) [%i1+i*4]%asi
- # define md5_block md5_block_asm_data_order_aligned
- # define ASI_PRIMARY_LITTLE 0x88
--# else
-+/*# else
- # error "MD5_BLOCK_DATA_ORDER is supported only on UltraSPARC!"
--# endif
-+# endif*/
- #else
- # define LOAD ld
- # define X(i) [%i1+i*4]
---- openssl-0.9.7.orig/crypto/opensslconf.h
-+++ openssl-0.9.7/crypto/opensslconf.h
-@@ -4,17 +4,38 @@
- /* OpenSSL was configured with the following options: */
- #ifndef OPENSSL_DOING_MAKEDEPEND
-
-+#ifndef OPENSSL_NO_IDEA
-+# define OPENSSL_NO_IDEA
-+#endif
-+#ifndef OPENSSL_NO_MDC2
-+# define OPENSSL_NO_MDC2
-+#endif
-+#ifndef OPENSSL_NO_RC5
-+# define OPENSSL_NO_RC5
-+#endif
- #ifndef OPENSSL_NO_KRB5
- # define OPENSSL_NO_KRB5
- #endif
-
- #endif /* OPENSSL_DOING_MAKEDEPEND */
-+#ifndef OPENSSL_THREADS
-+# define OPENSSL_THREADS
-+#endif
-
- /* The OPENSSL_NO_* macros are also defined as NO_* if the application
- asks for it. This is a transient feature that is provided for those
- who haven't had the time to do the appropriate changes in their
- applications. */
- #ifdef OPENSSL_ALGORITHM_DEFINES
-+# if defined(OPENSSL_NO_IDEA) && !defined(NO_IDEA)
-+# define NO_IDEA
-+# endif
-+# if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2)
-+# define NO_MDC2
-+# endif
-+# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
-+# define NO_RC5
-+# endif
- # if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
- # define NO_KRB5
- # endif
-@@ -27,7 +48,7 @@
-
- #if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
- #if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
--#define OPENSSLDIR "/usr/local/ssl"
-+#define OPENSSLDIR "/usr/lib/ssl"
- #endif
- #endif
-
-@@ -79,7 +100,7 @@
-
- #if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
- #define CONFIG_HEADER_BN_H
--#undef BN_LLONG
-+#define BN_LLONG
-
- /* Should we define BN_DIV2W here? */
-
-@@ -98,7 +119,7 @@
- #define CONFIG_HEADER_RC4_LOCL_H
- /* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
--#undef RC4_INDEX
-+#define RC4_INDEX
- #endif
-
- #if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-@@ -112,14 +133,14 @@
- /* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
- #ifndef DES_PTR
--#undef DES_PTR
-+#define DES_PTR
- #endif
-
- /* This helps C compiler generate the correct code for multiple functional
- * units. It reduces register dependancies at the expense of 2 more
- * registers */
- #ifndef DES_RISC1
--#undef DES_RISC1
-+#define DES_RISC1
- #endif
-
- #ifndef DES_RISC2
-@@ -133,7 +154,7 @@
- /* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
- #ifndef DES_UNROLL
--#undef DES_UNROLL
-+#define DES_UNROLL
- #endif
-
- /* These default values were supplied by
---- openssl-0.9.7.orig/ssl/ssl_algs.c
-+++ openssl-0.9.7/ssl/ssl_algs.c
-@@ -109,3 +109,8 @@
- return(1);
- }
-
-+#undef SSLeay_add_ssl_algorithms
-+int SSLeay_add_ssl_algorithms(void)
-+ {
-+ return SSL_library_init();
-+ }
---- openssl-0.9.7.orig/tools/c_rehash.in
-+++ openssl-0.9.7/tools/c_rehash.in
-@@ -1,4 +1,4 @@
--#!/usr/local/bin/perl
-+#!/usr/bin/perl
-
-
- # Perl c_rehash script, scan all files in a directory
---- openssl-0.9.7.orig/util/clean-depend.pl
-+++ openssl-0.9.7/util/clean-depend.pl
-@@ -1,4 +1,4 @@
--#!/usr/local/bin/perl -w
-+#!/usr/bin/perl
- # Clean the dependency list in a makefile of standard includes...
- # Written by Ben Laurie <ben@algroup.co.uk> 19 Jan 1999
-
---- openssl-0.9.7.orig/util/extract-names.pl
-+++ openssl-0.9.7/util/extract-names.pl
-@@ -1,4 +1,4 @@
--#!/usr/bin/perl
-+#!/usr/bin/perl
-
- $/ = ""; # Eat a paragraph at once.
- while(<STDIN>) {
---- openssl-0.9.7.orig/util/mkdef.pl
-+++ openssl-0.9.7/util/mkdef.pl
-@@ -1,4 +1,4 @@
--#!/usr/local/bin/perl -w
-+#!/usr/bin/perl
- #
- # generate a .def file
- #
---- openssl-0.9.7.orig/util/mkerr.pl
-+++ openssl-0.9.7/util/mkerr.pl
-@@ -1,4 +1,4 @@
--#!/usr/local/bin/perl -w
-+#!/usr/bin/perl
-
- my $config = "crypto/err/openssl.ec";
- my $debug = 0;
---- openssl-0.9.7.orig/util/mkstack.pl
-+++ openssl-0.9.7/util/mkstack.pl
-@@ -1,4 +1,4 @@
--#!/usr/local/bin/perl -w
-+#!/usr/bin/perl
-
- # This is a utility that searches out "DECLARE_STACK_OF()"
- # declarations in .h and .c files, and updates/creates/replaces
---- openssl-0.9.7.orig/util/pod2man.pl
-+++ openssl-0.9.7/util/pod2man.pl
-@@ -1,4 +1,4 @@
--: #!/usr/bin/perl-5.005
-+#!/usr/bin/perl
- eval 'exec /usr/bin/perl -S $0 ${1+"$@"}'
- if $running_under_some_shell;
-
---- openssl-0.9.7.orig/util/selftest.pl
-+++ openssl-0.9.7/util/selftest.pl
-@@ -1,4 +1,4 @@
--#!/usr/local/bin/perl -w
-+#!/usr/bin/perl
- #
- # Run the test suite and generate a report
- #
+++ /dev/null
-/etc/ppp/radius.conf
-/etc/ppp/radius/servers
+++ /dev/null
-Package: ppp-radius-plugin
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a RADIUS plugin for the PPP daemon
-Depends: ppp
+++ /dev/null
-plugin radius.so
-radius-config-file /etc/ppp/radius.conf
+++ /dev/null
-authserver localhost:1812
-acctserver localhost:1813
-dictionary /etc/ppp/radius/dictionary
-servers /etc/ppp/radius/servers
-seqfile /var/tmp/radius.seq
-radius_timeout 10
-radius_retries 3
-mapfile /dev/null
\ No newline at end of file
+++ /dev/null
-#
-# Updated 97/06/13 to livingston-radius-2.01 miquels@cistron.nl
-#
-# This file contains dictionary translations for parsing
-# requests and generating responses. All transactions are
-# composed of Attribute/Value Pairs. The value of each attribute
-# is specified as one of 4 data types. Valid data types are:
-#
-# string - 0-253 octets
-# ipaddr - 4 octets in network byte order
-# integer - 32 bit value in big endian order (high byte first)
-# date - 32 bit value in big endian order - seconds since
-# 00:00:00 GMT, Jan. 1, 1970
-#
-# Enumerated values are stored in the user file with dictionary
-# VALUE translations for easy administration.
-#
-# Example:
-#
-# ATTRIBUTE VALUE
-# --------------- -----
-# Framed-Protocol = PPP
-# 7 = 1 (integer encoding)
-#
-
-# The dictionary format now supports vendor-specific attributes.
-# Vendors are introduced like this:
-#
-# VENDOR vendor_name vendor_number
-#
-# For example:
-#
-# VENDOR RoaringPenguin 10055
-#
-# Vendor-specific attributes have a fifth field with the name of the
-# vendor. For example:
-#
-# ATTRIBUTE RP-Upstream-Speed-Limit 1 integer RoaringPenguin
-#
-# introduces a Roaring Penguin vendor-specific attribbute with name
-# RP-Upstream-Speed-Limit, number 1, type integer and vendor RoaringPenguin.
-
-#
-# Following are the proper new names. Use these.
-#
-ATTRIBUTE User-Name 1 string
-ATTRIBUTE Password 2 string
-ATTRIBUTE CHAP-Password 3 string
-ATTRIBUTE NAS-IP-Address 4 ipaddr
-ATTRIBUTE NAS-Port-Id 5 integer
-ATTRIBUTE Service-Type 6 integer
-ATTRIBUTE Framed-Protocol 7 integer
-ATTRIBUTE Framed-IP-Address 8 ipaddr
-ATTRIBUTE Framed-IP-Netmask 9 ipaddr
-ATTRIBUTE Framed-Routing 10 integer
-ATTRIBUTE Filter-Id 11 string
-ATTRIBUTE Framed-MTU 12 integer
-ATTRIBUTE Framed-Compression 13 integer
-ATTRIBUTE Login-IP-Host 14 ipaddr
-ATTRIBUTE Login-Service 15 integer
-ATTRIBUTE Login-TCP-Port 16 integer
-ATTRIBUTE Reply-Message 18 string
-ATTRIBUTE Callback-Number 19 string
-ATTRIBUTE Callback-Id 20 string
-ATTRIBUTE Framed-Route 22 string
-ATTRIBUTE Framed-IPX-Network 23 ipaddr
-ATTRIBUTE State 24 string
-ATTRIBUTE Class 25 string
-ATTRIBUTE Session-Timeout 27 integer
-ATTRIBUTE Idle-Timeout 28 integer
-ATTRIBUTE Termination-Action 29 integer
-ATTRIBUTE Called-Station-Id 30 string
-ATTRIBUTE Calling-Station-Id 31 string
-ATTRIBUTE NAS-Identifier 32 string
-ATTRIBUTE Acct-Status-Type 40 integer
-ATTRIBUTE Acct-Delay-Time 41 integer
-ATTRIBUTE Acct-Input-Octets 42 integer
-ATTRIBUTE Acct-Output-Octets 43 integer
-ATTRIBUTE Acct-Session-Id 44 string
-ATTRIBUTE Acct-Authentic 45 integer
-ATTRIBUTE Acct-Session-Time 46 integer
-ATTRIBUTE Acct-Input-Packets 47 integer
-ATTRIBUTE Acct-Output-Packets 48 integer
-ATTRIBUTE Acct-Terminate-Cause 49 integer
-ATTRIBUTE Chap-Challenge 60 string
-ATTRIBUTE NAS-Port-Type 61 integer
-ATTRIBUTE Port-Limit 62 integer
-ATTRIBUTE Connect-Info 77 string
-
-# RFC 2869
-ATTRIBUTE Acct-Interim-Interval 85 integer
-
-#
-# Experimental Non Protocol Attributes used by Cistron-Radiusd
-#
-ATTRIBUTE Huntgroup-Name 221 string
-ATTRIBUTE User-Category 1029 string
-ATTRIBUTE Group-Name 1030 string
-ATTRIBUTE Simultaneous-Use 1034 integer
-ATTRIBUTE Strip-User-Name 1035 integer
-ATTRIBUTE Fall-Through 1036 integer
-ATTRIBUTE Add-Port-To-IP-Address 1037 integer
-ATTRIBUTE Exec-Program 1038 string
-ATTRIBUTE Exec-Program-Wait 1039 string
-ATTRIBUTE Hint 1040 string
-
-#
-# Non-Protocol Attributes
-# These attributes are used internally by the server
-#
-ATTRIBUTE Expiration 21 date
-ATTRIBUTE Auth-Type 1000 integer
-ATTRIBUTE Menu 1001 string
-ATTRIBUTE Termination-Menu 1002 string
-ATTRIBUTE Prefix 1003 string
-ATTRIBUTE Suffix 1004 string
-ATTRIBUTE Group 1005 string
-ATTRIBUTE Crypt-Password 1006 string
-ATTRIBUTE Connect-Rate 1007 integer
-
-#
-# Experimental, implementation specific attributes
-#
-# Limit session traffic
-ATTRIBUTE Session-Octets-Limit 227 integer
-# What to assume as limit - 0 in+out, 1 in, 2 out, 3 max(in,out)
-ATTRIBUTE Octets-Direction 228 integer
-
-#
-# Integer Translations
-#
-
-# User Types
-
-VALUE Service-Type Login-User 1
-VALUE Service-Type Framed-User 2
-VALUE Service-Type Callback-Login-User 3
-VALUE Service-Type Callback-Framed-User 4
-VALUE Service-Type Outbound-User 5
-VALUE Service-Type Administrative-User 6
-VALUE Service-Type NAS-Prompt-User 7
-
-# Framed Protocols
-
-VALUE Framed-Protocol PPP 1
-VALUE Framed-Protocol SLIP 2
-
-# Framed Routing Values
-
-VALUE Framed-Routing None 0
-VALUE Framed-Routing Broadcast 1
-VALUE Framed-Routing Listen 2
-VALUE Framed-Routing Broadcast-Listen 3
-
-# Framed Compression Types
-
-VALUE Framed-Compression None 0
-VALUE Framed-Compression Van-Jacobson-TCP-IP 1
-
-# Login Services
-
-VALUE Login-Service Telnet 0
-VALUE Login-Service Rlogin 1
-VALUE Login-Service TCP-Clear 2
-VALUE Login-Service PortMaster 3
-
-# Status Types
-
-VALUE Acct-Status-Type Start 1
-VALUE Acct-Status-Type Stop 2
-VALUE Acct-Status-Type Accounting-On 7
-VALUE Acct-Status-Type Accounting-Off 8
-
-# Authentication Types
-
-VALUE Acct-Authentic RADIUS 1
-VALUE Acct-Authentic Local 2
-VALUE Acct-Authentic PowerLink128 100
-
-# Termination Options
-
-VALUE Termination-Action Default 0
-VALUE Termination-Action RADIUS-Request 1
-
-# NAS Port Types, available in 3.3.1 and later
-
-VALUE NAS-Port-Type Async 0
-VALUE NAS-Port-Type Sync 1
-VALUE NAS-Port-Type ISDN 2
-VALUE NAS-Port-Type ISDN-V120 3
-VALUE NAS-Port-Type ISDN-V110 4
-
-# Acct Terminate Causes, available in 3.3.2 and later
-
-VALUE Acct-Terminate-Cause User-Request 1
-VALUE Acct-Terminate-Cause Lost-Carrier 2
-VALUE Acct-Terminate-Cause Lost-Service 3
-VALUE Acct-Terminate-Cause Idle-Timeout 4
-VALUE Acct-Terminate-Cause Session-Timeout 5
-VALUE Acct-Terminate-Cause Admin-Reset 6
-VALUE Acct-Terminate-Cause Admin-Reboot 7
-VALUE Acct-Terminate-Cause Port-Error 8
-VALUE Acct-Terminate-Cause NAS-Error 9
-VALUE Acct-Terminate-Cause NAS-Request 10
-VALUE Acct-Terminate-Cause NAS-Reboot 11
-VALUE Acct-Terminate-Cause Port-Unneeded 12
-VALUE Acct-Terminate-Cause Port-Preempted 13
-VALUE Acct-Terminate-Cause Port-Suspended 14
-VALUE Acct-Terminate-Cause Service-Unavailable 15
-VALUE Acct-Terminate-Cause Callback 16
-VALUE Acct-Terminate-Cause User-Error 17
-VALUE Acct-Terminate-Cause Host-Request 18
-
-#
-# Non-Protocol Integer Translations
-#
-
-VALUE Auth-Type Local 0
-VALUE Auth-Type System 1
-VALUE Auth-Type SecurID 2
-VALUE Auth-Type Crypt-Local 3
-VALUE Auth-Type Reject 4
-
-#
-# Cistron extensions
-#
-VALUE Auth-Type Pam 253
-VALUE Auth-Type None 254
-
-#
-# Experimental Non-Protocol Integer Translations for Cistron-Radiusd
-#
-VALUE Fall-Through No 0
-VALUE Fall-Through Yes 1
-VALUE Add-Port-To-IP-Address No 0
-VALUE Add-Port-To-IP-Address Yes 1
-
-#
-# Configuration Values
-# uncomment these two lines to turn account expiration on
-#
-
-#VALUE Server-Config Password-Expiration 30
-#VALUE Server-Config Password-Warning 5
-
-# Octets-Direction
-VALUE Octets-Direction Sum 0
-VALUE Octets-Direction Input 1
-VALUE Octets-Direction Output 2
-VALUE Octets-Direction MaxOveral 3
-VALUE Octets-Direction MaxSession 4
-
-INCLUDE /etc/ppp/radius/dictionary.microsoft
+++ /dev/null
-#
-# Microsoft's VSA's, from RFC 2548
-#
-# $Id$
-#
-
-VENDOR Microsoft 311 Microsoft
-
-ATTRIBUTE MS-CHAP-Response 1 string Microsoft
-ATTRIBUTE MS-CHAP-Error 2 string Microsoft
-ATTRIBUTE MS-CHAP-CPW-1 3 string Microsoft
-ATTRIBUTE MS-CHAP-CPW-2 4 string Microsoft
-ATTRIBUTE MS-CHAP-LM-Enc-PW 5 string Microsoft
-ATTRIBUTE MS-CHAP-NT-Enc-PW 6 string Microsoft
-ATTRIBUTE MS-MPPE-Encryption-Policy 7 string Microsoft
-# This is referred to as both singular and plural in the RFC.
-# Plural seems to make more sense.
-ATTRIBUTE MS-MPPE-Encryption-Type 8 string Microsoft
-ATTRIBUTE MS-MPPE-Encryption-Types 8 string Microsoft
-ATTRIBUTE MS-RAS-Vendor 9 integer Microsoft
-ATTRIBUTE MS-CHAP-Domain 10 string Microsoft
-ATTRIBUTE MS-CHAP-Challenge 11 string Microsoft
-ATTRIBUTE MS-CHAP-MPPE-Keys 12 string Microsoft
-ATTRIBUTE MS-BAP-Usage 13 integer Microsoft
-ATTRIBUTE MS-Link-Utilization-Threshold 14 integer Microsoft
-ATTRIBUTE MS-Link-Drop-Time-Limit 15 integer Microsoft
-ATTRIBUTE MS-MPPE-Send-Key 16 string Microsoft
-ATTRIBUTE MS-MPPE-Recv-Key 17 string Microsoft
-ATTRIBUTE MS-RAS-Version 18 string Microsoft
-ATTRIBUTE MS-Old-ARAP-Password 19 string Microsoft
-ATTRIBUTE MS-New-ARAP-Password 20 string Microsoft
-ATTRIBUTE MS-ARAP-PW-Change-Reason 21 integer Microsoft
-
-ATTRIBUTE MS-Filter 22 string Microsoft
-ATTRIBUTE MS-Acct-Auth-Type 23 integer Microsoft
-ATTRIBUTE MS-Acct-EAP-Type 24 integer Microsoft
-
-ATTRIBUTE MS-CHAP2-Response 25 string Microsoft
-ATTRIBUTE MS-CHAP2-Success 26 string Microsoft
-ATTRIBUTE MS-CHAP2-CPW 27 string Microsoft
-
-ATTRIBUTE MS-Primary-DNS-Server 28 ipaddr Microsoft
-ATTRIBUTE MS-Secondary-DNS-Server 29 ipaddr Microsoft
-ATTRIBUTE MS-Primary-NBNS-Server 30 ipaddr Microsoft
-ATTRIBUTE MS-Secondary-NBNS-Server 31 ipaddr Microsoft
-
-#ATTRIBUTE MS-ARAP-Challenge 33 string Microsoft
-
-
-#
-# Integer Translations
-#
-
-# MS-BAP-Usage Values
-
-VALUE MS-BAP-Usage Not-Allowed 0
-VALUE MS-BAP-Usage Allowed 1
-VALUE MS-BAP-Usage Required 2
-
-# MS-ARAP-Password-Change-Reason Values
-
-VALUE MS-ARAP-PW-Change-Reason Just-Change-Password 1
-VALUE MS-ARAP-PW-Change-Reason Expired-Password 2
-VALUE MS-ARAP-PW-Change-Reason Admin-Requires-Password-Change 3
-VALUE MS-ARAP-PW-Change-Reason Password-Too-Short 4
-
-# MS-Acct-Auth-Type Values
-
-VALUE MS-Acct-Auth-Type PAP 1
-VALUE MS-Acct-Auth-Type CHAP 2
-VALUE MS-Acct-Auth-Type MS-CHAP-1 3
-VALUE MS-Acct-Auth-Type MS-CHAP-2 4
-VALUE MS-Acct-Auth-Type EAP 5
-
-# MS-Acct-EAP-Type Values
-
-VALUE MS-Acct-EAP-Type MD5 4
-VALUE MS-Acct-EAP-Type OTP 5
-VALUE MS-Acct-EAP-Type Generic-Token-Card 6
-VALUE MS-Acct-EAP-Type TLS 13
-
+++ /dev/null
-localhost secret
+++ /dev/null
-/etc/ppp/chap-secrets
-/etc/ppp/options
+++ /dev/null
-Package: ppp
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a Point-to-Point Protocol (PPP) daemon
+++ /dev/null
-nico pptp-server secret 172.16.1.101
\ No newline at end of file
+++ /dev/null
-/etc/ppp/ip-up
+++ /dev/null
-Package: pppoecd
-Priority: optional
-Version: 1.0
-Architecture: mipsel
-Maintainer: below0
-Section: net
-Source: Embedded in the main openwrt tarball
-Description: Linksys PPPoE daemon for access to internet using DSL modems
-
-
+++ /dev/null
-#!/bin/sh
-
-rm -rf /etc/ppp
-
+++ /dev/null
-#!/bin/sh
-
-killall pppoecd
-sleep 3
-killall -9 pppoecd
\ No newline at end of file
+++ /dev/null
---- pathnames.h.orig Tue Oct 14 03:09:53 2003
-+++ pathnames.h Sat Jul 10 21:04:34 2004
-@@ -9,37 +9,37 @@
-
- #else /* HAVE_PATHS_H */
- #ifndef _PATH_VARRUN
--#define _PATH_VARRUN "/tmp/ppp/"
-+#define _PATH_VARRUN "/var/run"
- #endif
- #define _PATH_DEVNULL "/dev/null"
- #endif /* HAVE_PATHS_H */
-
- #ifndef _ROOT_PATH
--#define _ROOT_PATH
-+#define _ROOT_PATH "/etc"
- #endif
-
--#define _PATH_UPAPFILE _ROOT_PATH "/tmp/ppp/pap-secrets"
--#define _PATH_CHAPFILE _ROOT_PATH "/tmp/ppp/chap-secrets"
--#define _PATH_SYSOPTIONS _ROOT_PATH "/tmp/ppp/options"
--#define _PATH_IPUP _ROOT_PATH "/tmp/ppp/ip-up"
--#define _PATH_IPDOWN _ROOT_PATH "/tmp/ppp/ip-down"
--#define _PATH_AUTHUP _ROOT_PATH "/tmp/ppp/auth-up"
--#define _PATH_AUTHDOWN _ROOT_PATH "/tmp/ppp/auth-down"
--#define _PATH_TTYOPT _ROOT_PATH "/tmp/ppp/options."
--#define _PATH_CONNERRS _ROOT_PATH "/tmp/ppp/connect-errors"
--#define _PATH_PEERFILES _ROOT_PATH "/tmp/ppp/peers/"
--#define _PATH_RESOLV _ROOT_PATH "/tmp/ppp/resolv.conf"
-+#define _PATH_UPAPFILE _ROOT_PATH "/ppp/pap-secrets"
-+#define _PATH_CHAPFILE _ROOT_PATH "/ppp/chap-secrets"
-+#define _PATH_SYSOPTIONS _ROOT_PATH "/ppp/options"
-+#define _PATH_IPUP _ROOT_PATH "/ppp/ip-up"
-+#define _PATH_IPDOWN _ROOT_PATH "/ppp/ip-down"
-+#define _PATH_AUTHUP _ROOT_PATH "/ppp/auth-up"
-+#define _PATH_AUTHDOWN _ROOT_PATH "/ppp/auth-down"
-+#define _PATH_TTYOPT _ROOT_PATH "/ppp/options."
-+#define _PATH_CONNERRS "/tmp/connect-errors"
-+#define _PATH_PEERFILES _ROOT_PATH "/ppp/peers/"
-+#define _PATH_RESOLV "/tmp/resolv.conf"
-
- #define _PATH_USEROPT ".ppprc"
-
- #ifdef INET6
--#define _PATH_IPV6UP _ROOT_PATH "/tmp/ppp/ipv6-up"
--#define _PATH_IPV6DOWN _ROOT_PATH "/tmp/ppp/ipv6-down"
-+#define _PATH_IPV6UP _ROOT_PATH "/ppp/ipv6-up"
-+#define _PATH_IPV6DOWN _ROOT_PATH "/ppp/ipv6-down"
- #endif
-
- #ifdef IPX_CHANGE
--#define _PATH_IPXUP _ROOT_PATH "/tmp/ppp/ipx-up"
--#define _PATH_IPXDOWN _ROOT_PATH "/tmp/ppp/ipx-down"
-+#define _PATH_IPXUP _ROOT_PATH "/ppp/ipx-up"
-+#define _PATH_IPXDOWN _ROOT_PATH "/ppp/ipx-down"
- #endif /* IPX_CHANGE */
-
- #ifdef __STDC__
-@@ -48,7 +48,7 @@
- #ifdef HAVE_PATHS_H
- #define _PATH_PPPDB "/var/run/pppd.tdb"
- #else
--#define _PATH_PPPDB "/tmp/ppp/pppd.tdb"
-+#define _PATH_PPPDB "/tmp/pppd.tdb"
- #endif
- #endif /* __STDC__ */
-
+++ /dev/null
---- pppoe.c.orig Sat Jul 10 20:55:38 2004
-+++ pppoe.c Sat Jul 10 20:55:55 2004
-@@ -131,8 +131,7 @@
-
- if (pppoe_srv_name !=NULL) {
- if (strlen (pppoe_srv_name) > 255) {
-- poe_error (ses," Service name too long
-- (maximum allowed 256 chars)");
-+ poe_error (ses," Service name too long (maximum allowed 256 chars)");
- poe_die(-1);
- }
- ses->filt->stag = make_filter_tag(PTT_SRV_NAME,
---- Makefile.orig Sun Jul 11 03:26:49 2004
-+++ Makefile Sun Jul 11 03:27:18 2004
-@@ -68,9 +68,9 @@
- all: pppoecd
-
- install: all
-- install -d $(INSTALLDIR)/usr/sbin
-- install -m 755 pppoecd $(INSTALLDIR)/usr/sbin
-- $(STRIP) $(INSTALLDIR)/usr/sbin/pppoecd
-+ install -d $(INSTALLDIR)/sbin
-+ install -m 755 pppoecd $(INSTALLDIR)/sbin
-+ $(STRIP) $(INSTALLDIR)/sbin/pppoecd
-
- pppoecd: $(OBJS)
- $(LD) -r -o .$@ $^ $(LIBCRYPT)
+++ /dev/null
-#!/bin/sh
-
-# set default route
-/sbin/route add default gw $IPREMOTE
-
+++ /dev/null
-/etc/ppp/pptp-client-options
+++ /dev/null
-Package: pptp-client
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a Point-to-Point Tunneling Protocol (PPTP) client
-Depends: ppp
+++ /dev/null
-#pty "/usr/sbin/pptp HOST --nolaunchpppd"
-#name USERNAME
-#remotename PROVIDER
-#require-mppe-128
-#file /etc/ppp/pptp-client-options
+++ /dev/null
-lock
-defaultroute
-noauth
-nobsdcomp
-nodeflate
-noipdefault
-asyncmap 0
+++ /dev/null
-/etc/ppp/pptp-server-options
-/etc/pptpd.conf
+++ /dev/null
-Package: pptp-server
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a Point-to-Point Tunneling Protocol (PPTP) server
-Depends: ppp
+++ /dev/null
-#!/bin/sh
-
-case $1 in
- start)
- insmod ppp_async >/dev/null 2>&1
- insmod ppp_mppe_mppc >/dev/null 2>&1
- [ -d /var/run ] || mkdir -p /var/run
- /usr/sbin/pptpd
- ;;
- stop)
- [ -f /var/run/pptpd.pid ] && kill $(cat /var/run/pptpd.pid) >/dev/null 2>&1
- ;;
- *)
- echo "usage: $0 (start|stop)"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-#debug
-#logfile /tmp/pptp-server.log
-172.16.1.1:
-auth
-name "pptp-server"
-lcp-echo-failure 3
-lcp-echo-interval 60
-default-asyncmap
-mtu 1482
-mru 1482
-nobsdcomp
-nodeflate
-#noproxyarp
-#nomppc
-nomppe-40
-nomppe-56
-nomppe-stateful
-require-mppe
-require-mppe-128
-require-mschap-v2
-refuse-chap
-refuse-mschap
-refuse-eap
-refuse-pap
-#ms-dns 172.16.1.1
-#plugin radius.so
-#radius-config-file /etc/radius.conf
+++ /dev/null
-#debug
-option /etc/ppp/pptp-server-options
-speed 115200
-stimeout 10
-#localip & remoteip are not needed, ip management is done by pppd
+++ /dev/null
-Package: radvd
-Architecture: mipsel
-Version: 0.7.2-1
-Section: net
-Priority: optional
-Maintainer: twolife
-Source: http://v6web.litech.org/radvd/
-Depends: kmod-ipv6
-Description: Routing Advertisement Daemon for IPv6
+++ /dev/null
-#!/bin/sh
-
-# This code is from radvd package found on:
-# http://openwrt.org/ipkg/
-
-if [ ! -f /etc/radvd.conf ] ; then
- echo
- echo
- echo See /etc/radvd.conf for configuration.
- echo
- cp /etc/radvd.conf.example /etc/radvd.conf
-fi
+++ /dev/null
-# This conffile is from radvd package found on:
-# http://openwrt.org/ipkg/
-# For more examples, see the radvd documentation.
-
-interface br0
-{
- AdvSendAdvert off;
-
-#
-# These settings cause advertisements to be sent every 3-10 seconds. This
-# range is good for 6to4 with a dynamic IPv4 address, but can be greatly
-# increased when not using 6to4 prefixes.
-#
-
- MinRtrAdvInterval 3;
- MaxRtrAdvInterval 10;
-
-#
-# Disable Mobile IPv6 support
-#
- AdvHomeAgentFlag off;
-
-#
-# example of a standard prefix
-#
- prefix fec0:0:0:1::/64
- {
- AdvOnLink on;
- AdvAutonomous on;
- AdvRouterAddr off;
- };
-
-};
+++ /dev/null
-Package: strace
-Architecture: mipsel
-Version: 4.5.6-1
-Section: utils
-Priority: optional
-Maintainer: Sebastien NOEL <me@twolife.org>
-Source: http://sourceforge.net/projects/strace/
-Depends:
-Description: A system call tracer
+++ /dev/null
-Package: tcpdump
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a powerful network traffic monitoring tool
-Depends: libpcap
+++ /dev/null
-/etc/vsftpd.conf
+++ /dev/null
-Package: vsftpd
-Priority: optional
-Section: net
-Version: TBDL
-Architecture: TBDL
-Maintainer: Nico <nthill@free.fr>
-Source: http://openwrt.org/cgi-bin/viewcvs.cgi/buildroot/
-Description: a fast and secure FTP server
+++ /dev/null
-#!/bin/sh
-
-case $1 in
- start)
- [ -d /var/run/vsftpd ] || mkdir -p /var/run/vsftpd
- /usr/sbin/vsftpd
- ;;
- stop)
- pid=$(pidof vsftpd)
- x=$$ # exclude our pid since we have the same name
- pid=$(echo $pid | sed -e "s/$x//")
- [ -n "$pid" ] && kill -TERM $pid
- ;;
- *)
- echo "usage: $0 (start|stop)"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-background=YES
-listen=YES
-anonymous_enable=NO
-local_enable=YES
-write_enable=YES
-local_umask=022
-check_shell=NO
-#dirmessage_enable=YES
-#ftpd_banner=Welcome to blah FTP service.
-session_support=NO
-#syslog_enable=YES
-#userlist_enable=YES
-#userlist_deny=NO
-#userlist_file=/etc/vsftpd.users
-#xferlog_enable=YES
-#xferlog_file=/var/log/vsftpd.log
-#xferlog_std_format=YES
+++ /dev/null
-Package: zlib
-Priority: optional
-Version: 1.1.4-1
-Architecture: mipsel
-Maintainer: below0
-Section: libs
-Source: Embedded in the main OpenWrt buildroot
-Description: zlib is a library implementing the 'deflate' compression system used by many programs.
-
-
+++ /dev/null
-// replacement diag module
-// (c) 2004 openwrt
-// mbm at alt dot org
-//
-// initial release 2004/03/28
-//
-// 2004/08/26 asus & buffalo support added
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <asm/io.h>
-#include <typedefs.h>
-#include <bcm4710.h>
-#include <sbutils.h>
-
-extern char * nvram_get(const char *name);
-static void *sbh;
-
-// v2.x - - - - -
-#define DIAG_GPIO (1<<1)
-#define DMZ_GPIO (1<<7)
-
-static void set_gpio(uint32 mask, uint32 value) {
- sb_gpiocontrol(sbh,mask,0);
- sb_gpioouten(sbh,mask,mask);
- sb_gpioout(sbh,mask,value);
-}
-
-static void v2_set_diag(u8 state) {
- set_gpio(DIAG_GPIO,state);
-}
-static void v2_set_dmz(u8 state) {
- set_gpio(DMZ_GPIO,state);
-}
-
-// v1.x - - - - -
-#define LED_DIAG 0x13
-#define LED_DMZ 0x12
-
-static void v1_set_diag(u8 state) {
- if (!state) {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
- } else {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
- }
-}
-static void v1_set_dmz(u8 state) {
- if (!state) {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
- } else {
- *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
- }
-}
-
-// - - - - -
-static void ignore(u8 ignored) {};
-
-// - - - - -
-#define BIT_DMZ 0x01
-#define BIT_DIAG 0x04
-
-void (*set_diag)(u8 state);
-void (*set_dmz)(u8 state);
-
-static unsigned int diag = 0;
-
-static void diag_change()
-{
- //printk(KERN_INFO "led -> %02x\n",diag);
-
- set_diag(0xFF); // off
- set_dmz(0xFF); // off
-
- if(diag & BIT_DIAG)
- set_diag(0x00); // on
- if(diag & BIT_DMZ)
- set_dmz(0x00); // on
-}
-
-static int proc_diag(ctl_table *table, int write, struct file *filp,
- void *buffer, size_t *lenp)
-{
- int r;
- r = proc_dointvec(table, write, filp, buffer, lenp);
- if (write && !r) {
- diag_change();
- }
- return r;
-}
-
-// - - - - -
-static unsigned char reset_gpio = 0;
-static unsigned char reset_polarity = 0;
-static unsigned int reset = 0;
-
-static int proc_reset(ctl_table *table, int write, struct file *filp,
- void *buffer, size_t *lenp)
-{
-
- if (reset_gpio) {
- sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
- sb_gpioouten(sbh,reset_gpio,0);
- reset=!(sb_gpioin(sbh)&reset_gpio);
-
- if (reset_polarity) reset=!reset;
- } else {
- reset=0;
- }
-
- return proc_dointvec(table, write, filp, buffer, lenp);
-}
-
-// - - - - -
-static struct ctl_table_header *diag_sysctl_header;
-
-static ctl_table sys_diag[] = {
- {
- ctl_name: 2000,
- procname: "diag",
- data: &diag,
- maxlen: sizeof(diag),
- mode: 0644,
- proc_handler: proc_diag
- },
- {
- ctl_name: 2001,
- procname: "reset",
- data: &reset,
- maxlen: sizeof(reset),
- mode: 0444,
- proc_handler: proc_reset
- },
- { 0 }
-};
-
-static int __init diag_init()
-{
- char *buf;
- u32 board_type;
- sbh = sb_kattach();
- sb_gpiosetcore(sbh);
-
- board_type = sb_boardtype(sbh);
- printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-
- set_diag=ignore;
- set_dmz=ignore;
-
- if ((board_type & 0xf00) == 0x400) {
- board_type=1;
- buf=nvram_get("boardtype")?:"";
- if (!strcmp(buf,"bcm94710dev")) {
- buf=nvram_get("boardnum")?:"";
- if (!strcmp(buf,"42")) {
- // wrt54g v1.x
- set_diag=v1_set_diag;
- set_dmz=v1_set_dmz;
- reset_gpio=(1<<6);
- reset_polarity=0;
- } else if (!strcmp(buf,"asusX")) {
- //asus wl-500g
- //no leds
- reset_gpio=(1<<6);
- reset_polarity=1;
- }
- } else if (!strcmp(buf,"bcm94710ap")) {
- buf=nvram_get("boardnum")?:"";
- if (!strcmp(buf,"42")) {
- // buffalo
- set_dmz=v2_set_dmz;
- reset_gpio=(1<<4);
- reset_polarity=1;
- } else if (!strcmp(buf,"44")) {
- //dell truemobile
- set_dmz=v2_set_dmz;
- reset_gpio=(1<<0);
- reset_polarity=0;
- }
- }
- } else {
- board_type=2;
- set_diag=v2_set_diag;
- set_dmz=v2_set_dmz;
- reset_gpio=(1<<6);
- reset_polarity=0;
- buf=nvram_get("boardnum")?:"";
- if (!strcmp(buf,"44")) {
- set_diag=ignore;
- set_dmz=ignore;
- reset_gpio=(1<<5);
- reset_polarity=0;
- }
- }
- printk(KERN_INFO "using v%d hardware\n",board_type);
-
- diag_sysctl_header = register_sysctl_table(sys_diag, 0);
- diag_change();
-
- return 0;
-}
-
-static void __exit diag_exit()
-{
- unregister_sysctl_table(diag_sysctl_header);
-}
-
-module_init(diag_init);
-module_exit(diag_exit);
+++ /dev/null
-#
-# Automatically generated by make menuconfig: don't edit
-#
-CONFIG_MIPS=y
-CONFIG_MIPS32=y
-# CONFIG_MIPS64 is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Machine selection
-#
-# CONFIG_ACER_PICA_61 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_BAGET_MIPS is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_HP_LASERJET is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_NEC_EAGLE is not set
-# CONFIG_OLIVETTI_M700 is not set
-# CONFIG_NINO is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-CONFIG_MIPS_BRCM=y
-CONFIG_BCM947XX=y
-CONFIG_BCM4710=y
-CONFIG_BCM4310=y
-CONFIG_BCM4704=y
-# CONFIG_BCM5365 is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200"
-CONFIG_PCI=y
-CONFIG_NONCOHERENT_IO=y
-CONFIG_NEW_TIME_C=y
-CONFIG_NEW_IRQ=y
-CONFIG_HND=y
-# CONFIG_MIPS_AU1000 is not set
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_VTAG_ICACHE is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_LLDSCD is not set
-# CONFIG_CPU_HAS_WB is not set
-CONFIG_CPU_HAS_SYNC=y
-
-#
-# General setup
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_NET=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_ISA is not set
-# CONFIG_EISA is not set
-# CONFIG_TC is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_PRINT_SYSCALLS is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_MIPS32_COMPAT is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_BINFMT_ELF32 is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_PM is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
-CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_B1 is not set
-CONFIG_MTD_CFI_B2=y
-# CONFIG_MTD_CFI_B4 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_SSTSTD=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BCM947XX=y
-# CONFIG_MTD_PB1000 is not set
-# CONFIG_MTD_PB1500 is not set
-# CONFIG_MTD_PB1100 is not set
-# CONFIG_MTD_CSTM_MIPS_IXX is not set
-# CONFIG_MTD_OCELOT is not set
-# CONFIG_MTD_LASAT is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SFLASH=y
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_MSYS is not set
-# CONFIG_NOROOT is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_NETSWAP=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_ROUTE_LARGE_TABLES is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_H323=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_TFTP=y
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_CT_PROTO_GRE=y
-CONFIG_IP_NF_PPTP=y
-CONFIG_IP_NF_MMS=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_MATCH_QUOTA=m
-CONFIG_IP_NF_POOL=m
-CONFIG_IP_POOL_STATISTICS=y
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_DSTLIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_CONDITION=m
-# CONFIG_IP_NF_MATCH_RANDOM is not set
-CONFIG_IP_NF_MATCH_PSD=m
-# CONFIG_IP_NF_MATCH_OSF is not set
-# CONFIG_IP_NF_MATCH_NTH is not set
-CONFIG_IP_NF_MATCH_IPV4OPTIONS=m
-# CONFIG_IP_NF_MATCH_FUZZY is not set
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-# CONFIG_IP_NF_MATCH_U32 is not set
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=y
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNLIMIT=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_STRING=m
-# CONFIG_IP_NF_MATCH_OWNER is not set
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_NETLINK=m
-CONFIG_IP_NF_TARGET_IPV4OPTSSTRIP=m
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_NAT_H323=y
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-CONFIG_IP_NF_NAT_PPTP=y
-CONFIG_IP_NF_NAT_PROTO_GRE=y
-# CONFIG_IP_NF_NAT_LOCAL is not set
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_MMS=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_IPMARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IPV6=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-# CONFIG_IP6_NF_MATCH_RANDOM is not set
-# CONFIG_IP6_NF_MATCH_NTH is not set
-# CONFIG_IP6_NF_MATCH_FUZZY is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_IPF=m
-CONFIG_BRIDGE_EBT_ARPF=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_VLANF=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_MARKF=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# Broadcom HND network devices
-#
-CONFIG_HND=y
-# CONFIG_IL is not set
-CONFIG_ET=m
-# CONFIG_ET_4413 is not set
-CONFIG_ET_47XX=y
-CONFIG_WL=m
-CONFIG_WL_AP=y
-CONFIG_WL_STA=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-CONFIG_SHAPER=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=128
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I810_TCO is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SC1200_WDT is not set
-CONFIG_SOFT_WATCHDOG=y
-# CONFIG_W83877F_WDT is not set
-# CONFIG_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_INDYDOG is not set
-# CONFIG_AMD7XX_TCO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# File systems
-#
-CONFIG_BLKDEV_SWAP=m
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_BBC_ARMLIB is not set
-CONFIG_JFFS2_BBC_LZO=y
-CONFIG_JFFS2_BBC_LZARI=y
-CONFIG_JFFS2_BBC_LZHD=y
-CONFIG_JFFS2_BBC_LZSS=y
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_ROOT_NFS is not set
-CONFIG_SWAP_VIA_NFS=m
-CONFIG_NETSWAP=y
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-CONFIG_CROSSCOMPILE=y
-# CONFIG_KERNPROF is not set
-# CONFIG_MCOUNT is not set
-# CONFIG_DEBUG is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_MIPS_UNCACHED is not set
-# CONFIG_KTRACE is not set
-# CONFIG_HWSIM is not set
-
-#
-# Library routines
-#
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack.h 2003-08-12 07:43:11.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack.h 2004-05-09 04:13:03.000000000 -0400
-@@ -45,39 +45,27 @@
-
- #include <linux/netfilter_ipv4/ip_conntrack_tcp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_icmp.h>
--#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
-
- /* per conntrack: protocol private data */
- union ip_conntrack_proto {
- /* insert conntrack proto private data here */
-- struct ip_ct_gre gre;
- struct ip_ct_tcp tcp;
- struct ip_ct_icmp icmp;
- };
-
- union ip_conntrack_expect_proto {
- /* insert expect proto private data here */
-- struct ip_ct_gre_expect gre;
- };
-
- /* Add protocol helper include file here */
--#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
--#include <linux/netfilter_ipv4/ip_conntrack_mms.h>
--#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
--
- #include <linux/netfilter_ipv4/ip_conntrack_ftp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_irc.h>
--#include <linux/netfilter_ipv4/ip_autofw.h>
-
- /* per expectation: application helper private data */
- union ip_conntrack_expect_help {
- /* insert conntrack helper private data (expect) here */
-- struct ip_ct_pptp_expect exp_pptp_info;
-- struct ip_ct_mms_expect exp_mms_info;
-- struct ip_ct_h225_expect exp_h225_info;
- struct ip_ct_ftp_expect exp_ftp_info;
- struct ip_ct_irc_expect exp_irc_info;
-- struct ip_autofw_expect exp_autofw_info;
-
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- union {
-@@ -89,21 +77,16 @@
- /* per conntrack: application helper private data */
- union ip_conntrack_help {
- /* insert conntrack helper private data (master) here */
-- struct ip_ct_pptp_master ct_pptp_info;
-- struct ip_ct_mms_master ct_mms_info;
-- struct ip_ct_h225_master ct_h225_info;
- struct ip_ct_ftp_master ct_ftp_info;
- struct ip_ct_irc_master ct_irc_info;
- };
-
- #ifdef CONFIG_IP_NF_NAT_NEEDED
- #include <linux/netfilter_ipv4/ip_nat.h>
--#include <linux/netfilter_ipv4/ip_nat_pptp.h>
-
- /* per conntrack: nat application helper private data */
- union ip_conntrack_nat_help {
- /* insert nat helper private data here */
-- struct ip_nat_pptp nat_pptp_info;
- };
- #endif
-
-@@ -275,9 +258,5 @@
- }
-
- extern unsigned int ip_conntrack_htable_size;
--
--/* connection tracking time out variables. */
--extern int sysctl_ip_conntrack_tcp_timeouts[10];
--extern int sysctl_ip_conntrack_udp_timeouts[2];
- #endif /* __KERNEL__ */
- #endif /* _IP_CONNTRACK_H */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack_h323.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack_h323.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack_h323.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack_h323.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,30 +0,0 @@
--#ifndef _IP_CONNTRACK_H323_H
--#define _IP_CONNTRACK_H323_H
--/* H.323 connection tracking. */
--
--#ifdef __KERNEL__
--/* Protects H.323 related data */
--DECLARE_LOCK_EXTERN(ip_h323_lock);
--#endif
--
--/* Default H.225 port */
--#define H225_PORT 1720
--
--/* This structure is per expected connection */
--struct ip_ct_h225_expect {
-- u_int16_t port; /* Port of the H.225 helper/RTCP/RTP channel */
-- enum ip_conntrack_dir dir; /* Direction of the original connection */
-- unsigned int offset; /* offset of the address in the payload */
--};
--
--/* This structure exists only once per master */
--struct ip_ct_h225_master {
-- int is_h225; /* H.225 or H.245 connection */
--#ifdef CONFIG_IP_NF_NAT_NEEDED
-- enum ip_conntrack_dir dir; /* Direction of the original connection */
-- u_int32_t seq[IP_CT_DIR_MAX]; /* Exceptional packet mangling for signal addressess... */
-- unsigned int offset[IP_CT_DIR_MAX]; /* ...and the offset of the addresses in the payload */
--#endif
--};
--
--#endif /* _IP_CONNTRACK_H323_H */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack_mms.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack_mms.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack_mms.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack_mms.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,31 +0,0 @@
--#ifndef _IP_CONNTRACK_MMS_H
--#define _IP_CONNTRACK_MMS_H
--/* MMS tracking. */
--
--#ifdef __KERNEL__
--#include <linux/netfilter_ipv4/lockhelp.h>
--
--DECLARE_LOCK_EXTERN(ip_mms_lock);
--
--#define MMS_PORT 1755
--#define MMS_SRV_MSG_ID 196610
--
--#define MMS_SRV_MSG_OFFSET 36
--#define MMS_SRV_UNICODE_STRING_OFFSET 60
--#define MMS_SRV_CHUNKLENLV_OFFSET 16
--#define MMS_SRV_CHUNKLENLM_OFFSET 32
--#define MMS_SRV_MESSAGELENGTH_OFFSET 8
--#endif
--
--/* This structure is per expected connection */
--struct ip_ct_mms_expect {
-- u_int32_t len;
-- u_int32_t padding;
-- u_int16_t port;
--};
--
--/* This structure exists only once per master */
--struct ip_ct_mms_master {
--};
--
--#endif /* _IP_CONNTRACK_MMS_H */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack_pptp.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack_pptp.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack_pptp.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack_pptp.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,313 +0,0 @@
--/* PPTP constants and structs */
--#ifndef _CONNTRACK_PPTP_H
--#define _CONNTRACK_PPTP_H
--
--/* state of the control session */
--enum pptp_ctrlsess_state {
-- PPTP_SESSION_NONE, /* no session present */
-- PPTP_SESSION_ERROR, /* some session error */
-- PPTP_SESSION_STOPREQ, /* stop_sess request seen */
-- PPTP_SESSION_REQUESTED, /* start_sess request seen */
-- PPTP_SESSION_CONFIRMED, /* session established */
--};
--
--/* state of the call inside the control session */
--enum pptp_ctrlcall_state {
-- PPTP_CALL_NONE,
-- PPTP_CALL_ERROR,
-- PPTP_CALL_OUT_REQ,
-- PPTP_CALL_OUT_CONF,
-- PPTP_CALL_IN_REQ,
-- PPTP_CALL_IN_REP,
-- PPTP_CALL_IN_CONF,
-- PPTP_CALL_CLEAR_REQ,
--};
--
--
--/* conntrack private data */
--struct ip_ct_pptp_master {
-- enum pptp_ctrlsess_state sstate; /* session state */
--
-- /* everything below is going to be per-expectation in newnat,
-- * since there could be more than one call within one session */
-- enum pptp_ctrlcall_state cstate; /* call state */
-- u_int16_t pac_call_id; /* call id of PAC, host byte order */
-- u_int16_t pns_call_id; /* call id of PNS, host byte order */
--};
--
--/* conntrack_expect private member */
--struct ip_ct_pptp_expect {
-- enum pptp_ctrlcall_state cstate; /* call state */
-- u_int16_t pac_call_id; /* call id of PAC */
-- u_int16_t pns_call_id; /* call id of PNS */
--};
--
--
--#ifdef __KERNEL__
--
--#include <linux/netfilter_ipv4/lockhelp.h>
--DECLARE_LOCK_EXTERN(ip_pptp_lock);
--
--#define IP_CONNTR_PPTP PPTP_CONTROL_PORT
--
--union pptp_ctrl_union {
-- void *rawreq;
-- struct PptpStartSessionRequest *sreq;
-- struct PptpStartSessionReply *srep;
-- struct PptpStopSessionReqest *streq;
-- struct PptpStopSessionReply *strep;
-- struct PptpOutCallRequest *ocreq;
-- struct PptpOutCallReply *ocack;
-- struct PptpInCallRequest *icreq;
-- struct PptpInCallReply *icack;
-- struct PptpInCallConnected *iccon;
-- struct PptpClearCallRequest *clrreq;
-- struct PptpCallDisconnectNotify *disc;
-- struct PptpWanErrorNotify *wanerr;
-- struct PptpSetLinkInfo *setlink;
--};
--
--
--
--#define PPTP_CONTROL_PORT 1723
--
--#define PPTP_PACKET_CONTROL 1
--#define PPTP_PACKET_MGMT 2
--
--#define PPTP_MAGIC_COOKIE 0x1a2b3c4d
--
--struct pptp_pkt_hdr {
-- __u16 packetLength;
-- __u16 packetType;
-- __u32 magicCookie;
--};
--
--/* PptpControlMessageType values */
--#define PPTP_START_SESSION_REQUEST 1
--#define PPTP_START_SESSION_REPLY 2
--#define PPTP_STOP_SESSION_REQUEST 3
--#define PPTP_STOP_SESSION_REPLY 4
--#define PPTP_ECHO_REQUEST 5
--#define PPTP_ECHO_REPLY 6
--#define PPTP_OUT_CALL_REQUEST 7
--#define PPTP_OUT_CALL_REPLY 8
--#define PPTP_IN_CALL_REQUEST 9
--#define PPTP_IN_CALL_REPLY 10
--#define PPTP_IN_CALL_CONNECT 11
--#define PPTP_CALL_CLEAR_REQUEST 12
--#define PPTP_CALL_DISCONNECT_NOTIFY 13
--#define PPTP_WAN_ERROR_NOTIFY 14
--#define PPTP_SET_LINK_INFO 15
--
--#define PPTP_MSG_MAX 15
--
--/* PptpGeneralError values */
--#define PPTP_ERROR_CODE_NONE 0
--#define PPTP_NOT_CONNECTED 1
--#define PPTP_BAD_FORMAT 2
--#define PPTP_BAD_VALUE 3
--#define PPTP_NO_RESOURCE 4
--#define PPTP_BAD_CALLID 5
--#define PPTP_REMOVE_DEVICE_ERROR 6
--
--struct PptpControlHeader {
-- __u16 messageType;
-- __u16 reserved;
--};
--
--/* FramingCapability Bitmap Values */
--#define PPTP_FRAME_CAP_ASYNC 0x1
--#define PPTP_FRAME_CAP_SYNC 0x2
--
--/* BearerCapability Bitmap Values */
--#define PPTP_BEARER_CAP_ANALOG 0x1
--#define PPTP_BEARER_CAP_DIGITAL 0x2
--
--struct PptpStartSessionRequest {
-- __u16 protocolVersion;
-- __u8 reserved1;
-- __u8 reserved2;
-- __u32 framingCapability;
-- __u32 bearerCapability;
-- __u16 maxChannels;
-- __u16 firmwareRevision;
-- __u8 hostName[64];
-- __u8 vendorString[64];
--};
--
--/* PptpStartSessionResultCode Values */
--#define PPTP_START_OK 1
--#define PPTP_START_GENERAL_ERROR 2
--#define PPTP_START_ALREADY_CONNECTED 3
--#define PPTP_START_NOT_AUTHORIZED 4
--#define PPTP_START_UNKNOWN_PROTOCOL 5
--
--struct PptpStartSessionReply {
-- __u16 protocolVersion;
-- __u8 resultCode;
-- __u8 generalErrorCode;
-- __u32 framingCapability;
-- __u32 bearerCapability;
-- __u16 maxChannels;
-- __u16 firmwareRevision;
-- __u8 hostName[64];
-- __u8 vendorString[64];
--};
--
--/* PptpStopReasons */
--#define PPTP_STOP_NONE 1
--#define PPTP_STOP_PROTOCOL 2
--#define PPTP_STOP_LOCAL_SHUTDOWN 3
--
--struct PptpStopSessionRequest {
-- __u8 reason;
--};
--
--/* PptpStopSessionResultCode */
--#define PPTP_STOP_OK 1
--#define PPTP_STOP_GENERAL_ERROR 2
--
--struct PptpStopSessionReply {
-- __u8 resultCode;
-- __u8 generalErrorCode;
--};
--
--struct PptpEchoRequest {
-- __u32 identNumber;
--};
--
--/* PptpEchoReplyResultCode */
--#define PPTP_ECHO_OK 1
--#define PPTP_ECHO_GENERAL_ERROR 2
--
--struct PptpEchoReply {
-- __u32 identNumber;
-- __u8 resultCode;
-- __u8 generalErrorCode;
-- __u16 reserved;
--};
--
--/* PptpFramingType */
--#define PPTP_ASYNC_FRAMING 1
--#define PPTP_SYNC_FRAMING 2
--#define PPTP_DONT_CARE_FRAMING 3
--
--/* PptpCallBearerType */
--#define PPTP_ANALOG_TYPE 1
--#define PPTP_DIGITAL_TYPE 2
--#define PPTP_DONT_CARE_BEARER_TYPE 3
--
--struct PptpOutCallRequest {
-- __u16 callID;
-- __u16 callSerialNumber;
-- __u32 minBPS;
-- __u32 maxBPS;
-- __u32 bearerType;
-- __u32 framingType;
-- __u16 packetWindow;
-- __u16 packetProcDelay;
-- __u16 reserved1;
-- __u16 phoneNumberLength;
-- __u16 reserved2;
-- __u8 phoneNumber[64];
-- __u8 subAddress[64];
--};
--
--/* PptpCallResultCode */
--#define PPTP_OUTCALL_CONNECT 1
--#define PPTP_OUTCALL_GENERAL_ERROR 2
--#define PPTP_OUTCALL_NO_CARRIER 3
--#define PPTP_OUTCALL_BUSY 4
--#define PPTP_OUTCALL_NO_DIAL_TONE 5
--#define PPTP_OUTCALL_TIMEOUT 6
--#define PPTP_OUTCALL_DONT_ACCEPT 7
--
--struct PptpOutCallReply {
-- __u16 callID;
-- __u16 peersCallID;
-- __u8 resultCode;
-- __u8 generalErrorCode;
-- __u16 causeCode;
-- __u32 connectSpeed;
-- __u16 packetWindow;
-- __u16 packetProcDelay;
-- __u32 physChannelID;
--};
--
--struct PptpInCallRequest {
-- __u16 callID;
-- __u16 callSerialNumber;
-- __u32 callBearerType;
-- __u32 physChannelID;
-- __u16 dialedNumberLength;
-- __u16 dialingNumberLength;
-- __u8 dialedNumber[64];
-- __u8 dialingNumber[64];
-- __u8 subAddress[64];
--};
--
--/* PptpInCallResultCode */
--#define PPTP_INCALL_ACCEPT 1
--#define PPTP_INCALL_GENERAL_ERROR 2
--#define PPTP_INCALL_DONT_ACCEPT 3
--
--struct PptpInCallReply {
-- __u16 callID;
-- __u16 peersCallID;
-- __u8 resultCode;
-- __u8 generalErrorCode;
-- __u16 packetWindow;
-- __u16 packetProcDelay;
-- __u16 reserved;
--};
--
--struct PptpInCallConnected {
-- __u16 peersCallID;
-- __u16 reserved;
-- __u32 connectSpeed;
-- __u16 packetWindow;
-- __u16 packetProcDelay;
-- __u32 callFramingType;
--};
--
--struct PptpClearCallRequest {
-- __u16 callID;
-- __u16 reserved;
--};
--
--struct PptpCallDisconnectNotify {
-- __u16 callID;
-- __u8 resultCode;
-- __u8 generalErrorCode;
-- __u16 causeCode;
-- __u16 reserved;
-- __u8 callStatistics[128];
--};
--
--struct PptpWanErrorNotify {
-- __u16 peersCallID;
-- __u16 reserved;
-- __u32 crcErrors;
-- __u32 framingErrors;
-- __u32 hardwareOverRuns;
-- __u32 bufferOverRuns;
-- __u32 timeoutErrors;
-- __u32 alignmentErrors;
--};
--
--struct PptpSetLinkInfo {
-- __u16 peersCallID;
-- __u16 reserved;
-- __u32 sendAccm;
-- __u32 recvAccm;
--};
--
--
--struct pptp_priv_data {
-- __u16 call_id;
-- __u16 mcall_id;
-- __u16 pcall_id;
--};
--
--#endif /* __KERNEL__ */
--#endif /* _CONNTRACK_PPTP_H */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack_proto_gre.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,121 +0,0 @@
--#ifndef _CONNTRACK_PROTO_GRE_H
--#define _CONNTRACK_PROTO_GRE_H
--#include <asm/byteorder.h>
--
--/* GRE PROTOCOL HEADER */
--
--/* GRE Version field */
--#define GRE_VERSION_1701 0x0
--#define GRE_VERSION_PPTP 0x1
--
--/* GRE Protocol field */
--#define GRE_PROTOCOL_PPTP 0x880B
--
--/* GRE Flags */
--#define GRE_FLAG_C 0x80
--#define GRE_FLAG_R 0x40
--#define GRE_FLAG_K 0x20
--#define GRE_FLAG_S 0x10
--#define GRE_FLAG_A 0x80
--
--#define GRE_IS_C(f) ((f)&GRE_FLAG_C)
--#define GRE_IS_R(f) ((f)&GRE_FLAG_R)
--#define GRE_IS_K(f) ((f)&GRE_FLAG_K)
--#define GRE_IS_S(f) ((f)&GRE_FLAG_S)
--#define GRE_IS_A(f) ((f)&GRE_FLAG_A)
--
--/* GRE is a mess: Four different standards */
--struct gre_hdr {
--#if defined(__LITTLE_ENDIAN_BITFIELD)
-- __u16 rec:3,
-- srr:1,
-- seq:1,
-- key:1,
-- routing:1,
-- csum:1,
-- version:3,
-- reserved:4,
-- ack:1;
--#elif defined(__BIG_ENDIAN_BITFIELD)
-- __u16 csum:1,
-- routing:1,
-- key:1,
-- seq:1,
-- srr:1,
-- rec:3,
-- ack:1,
-- reserved:4,
-- version:3;
--#else
--#error "Adjust your <asm/byteorder.h> defines"
--#endif
-- __u16 protocol;
--};
--
--/* modified GRE header for PPTP */
--struct gre_hdr_pptp {
-- __u8 flags; /* bitfield */
-- __u8 version; /* should be GRE_VERSION_PPTP */
-- __u16 protocol; /* should be GRE_PROTOCOL_PPTP */
-- __u16 payload_len; /* size of ppp payload, not inc. gre header */
-- __u16 call_id; /* peer's call_id for this session */
-- __u32 seq; /* sequence number. Present if S==1 */
-- __u32 ack; /* seq number of highest packet recieved by */
-- /* sender in this session */
--};
--
--
--/* this is part of ip_conntrack */
--struct ip_ct_gre {
-- unsigned int stream_timeout;
-- unsigned int timeout;
--};
--
--/* this is part of ip_conntrack_expect */
--struct ip_ct_gre_expect {
-- struct ip_ct_gre_keymap *keymap_orig, *keymap_reply;
--};
--
--#ifdef __KERNEL__
--
--/* structure for original <-> reply keymap */
--struct ip_ct_gre_keymap {
-- struct list_head list;
--
-- struct ip_conntrack_tuple tuple;
-- struct ip_conntrack_expect *master;
--};
--
--
--/* add new tuple->key_reply pair to keymap */
--int ip_ct_gre_keymap_add(struct ip_conntrack_expect *exp,
-- struct ip_conntrack_tuple *t,
-- int reply);
--
--/* change an existing keymap entry */
--void ip_ct_gre_keymap_change(struct ip_ct_gre_keymap *km,
-- struct ip_conntrack_tuple *t);
--
--
--
--/* get pointer to gre key, if present */
--static inline u_int32_t *gre_key(struct gre_hdr *greh)
--{
-- if (!greh->key)
-- return NULL;
-- if (greh->csum || greh->routing)
-- return (u_int32_t *) (greh+sizeof(*greh)+4);
-- return (u_int32_t *) (greh+sizeof(*greh));
--}
--
--/* get pointer ot gre csum, if present */
--static inline u_int16_t *gre_csum(struct gre_hdr *greh)
--{
-- if (!greh->csum)
-- return NULL;
-- return (u_int16_t *) (greh+sizeof(*greh));
--}
--
--#endif /* __KERNEL__ */
--
--#endif /* _CONNTRACK_PROTO_GRE_H */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack_tftp.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack_tftp.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack_tftp.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack_tftp.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,13 +0,0 @@
--#ifndef _IP_CT_TFTP
--#define _IP_CT_TFTP
--
--#define TFTP_PORT 69
--
--struct tftphdr {
-- u_int16_t opcode;
--};
--
--#define TFTP_OPCODE_READ 1
--#define TFTP_OPCODE_WRITE 2
--
--#endif /* _IP_CT_TFTP */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_conntrack_tuple.h linux.stock/include/linux/netfilter_ipv4/ip_conntrack_tuple.h
---- linux/include/linux/netfilter_ipv4/ip_conntrack_tuple.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_conntrack_tuple.h 2004-05-09 04:13:03.000000000 -0400
-@@ -14,7 +14,7 @@
- union ip_conntrack_manip_proto
- {
- /* Add other protocols here. */
-- u_int32_t all;
-+ u_int16_t all;
-
- struct {
- u_int16_t port;
-@@ -25,9 +25,6 @@
- struct {
- u_int16_t id;
- } icmp;
-- struct {
-- u_int32_t key;
-- } gre;
- };
-
- /* The manipulable part of the tuple. */
-@@ -47,7 +44,7 @@
- u_int32_t ip;
- union {
- /* Add other protocols here. */
-- u_int64_t all;
-+ u_int16_t all;
-
- struct {
- u_int16_t port;
-@@ -58,11 +55,6 @@
- struct {
- u_int8_t type, code;
- } icmp;
-- struct {
-- u_int16_t protocol;
-- u_int8_t version;
-- u_int32_t key;
-- } gre;
- } u;
-
- /* The protocol. */
-@@ -80,16 +72,10 @@
- #ifdef __KERNEL__
-
- #define DUMP_TUPLE(tp) \
--DEBUGP("tuple %p: %u %u.%u.%u.%u:%u -> %u.%u.%u.%u:%u\n", \
-+DEBUGP("tuple %p: %u %u.%u.%u.%u:%hu -> %u.%u.%u.%u:%hu\n", \
- (tp), (tp)->dst.protonum, \
-- NIPQUAD((tp)->src.ip), ntohl((tp)->src.u.all), \
-- NIPQUAD((tp)->dst.ip), ntohl((tp)->dst.u.all))
--
--#define DUMP_TUPLE_RAW(x) \
-- DEBUGP("tuple %p: %u %u.%u.%u.%u:0x%08x -> %u.%u.%u.%u:0x%08x\n",\
-- (x), (x)->dst.protonum, \
-- NIPQUAD((x)->src.ip), ntohl((x)->src.u.all), \
-- NIPQUAD((x)->dst.ip), ntohl((x)->dst.u.all))
-+ NIPQUAD((tp)->src.ip), ntohs((tp)->src.u.all), \
-+ NIPQUAD((tp)->dst.ip), ntohs((tp)->dst.u.all))
-
- #define CTINFO2DIR(ctinfo) ((ctinfo) >= IP_CT_IS_REPLY ? IP_CT_DIR_REPLY : IP_CT_DIR_ORIGINAL)
-
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_nat_pptp.h linux.stock/include/linux/netfilter_ipv4/ip_nat_pptp.h
---- linux/include/linux/netfilter_ipv4/ip_nat_pptp.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_nat_pptp.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,11 +0,0 @@
--/* PPTP constants and structs */
--#ifndef _NAT_PPTP_H
--#define _NAT_PPTP_H
--
--/* conntrack private data */
--struct ip_nat_pptp {
-- u_int16_t pns_call_id; /* NAT'ed PNS call id */
-- u_int16_t pac_call_id; /* NAT'ed PAC call id */
--};
--
--#endif /* _NAT_PPTP_H */
-diff -Nurb linux/include/linux/netfilter_ipv4/ip_pool.h linux.stock/include/linux/netfilter_ipv4/ip_pool.h
---- linux/include/linux/netfilter_ipv4/ip_pool.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ip_pool.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,64 +0,0 @@
--#ifndef _IP_POOL_H
--#define _IP_POOL_H
--
--/***************************************************************************/
--/* This program is free software; you can redistribute it and/or modify */
--/* it under the terms of the GNU General Public License as published by */
--/* the Free Software Foundation; either version 2 of the License, or */
--/* (at your option) any later version. */
--/* */
--/* This program is distributed in the hope that it will be useful, */
--/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
--/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */
--/* GNU General Public License for more details. */
--/* */
--/* You should have received a copy of the GNU General Public License */
--/* along with this program; if not, write to the Free Software */
--/* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA*/
--/***************************************************************************/
--
--/* A sockopt of such quality has hardly ever been seen before on the open
-- * market! This little beauty, hardly ever used: above 64, so it's
-- * traditionally used for firewalling, not touched (even once!) by the
-- * 2.0, 2.2 and 2.4 kernels!
-- *
-- * Comes with its own certificate of authenticity, valid anywhere in the
-- * Free world!
-- *
-- * Rusty, 19.4.2000
-- */
--#define SO_IP_POOL 81
--
--typedef int ip_pool_t; /* pool index */
--#define IP_POOL_NONE ((ip_pool_t)-1)
--
--struct ip_pool_request {
-- int op;
-- ip_pool_t index;
-- u_int32_t addr;
-- u_int32_t addr2;
--};
--
--/* NOTE: I deliberately break the first cut ippool utility. Nobody uses it. */
--
--#define IP_POOL_BAD001 0x00000010
--
--#define IP_POOL_FLUSH 0x00000011 /* req.index, no arguments */
--#define IP_POOL_INIT 0x00000012 /* from addr to addr2 incl. */
--#define IP_POOL_DESTROY 0x00000013 /* req.index, no arguments */
--#define IP_POOL_ADD_ADDR 0x00000014 /* add addr to pool */
--#define IP_POOL_DEL_ADDR 0x00000015 /* del addr from pool */
--#define IP_POOL_HIGH_NR 0x00000016 /* result in req.index */
--#define IP_POOL_LOOKUP 0x00000017 /* result in addr and addr2 */
--#define IP_POOL_USAGE 0x00000018 /* result in addr */
--#define IP_POOL_TEST_ADDR 0x00000019 /* result (0/1) returned */
--
--#ifdef __KERNEL__
--
--/* NOTE: ip_pool_match() and ip_pool_mod() expect ADDR to be host byte order */
--extern int ip_pool_match(ip_pool_t pool, u_int32_t addr);
--extern int ip_pool_mod(ip_pool_t pool, u_int32_t addr, int isdel);
--
--#endif
--
--#endif /*_IP_POOL_H*/
-diff -Nurb linux/include/linux/netfilter_ipv4/ipt_pool.h linux.stock/include/linux/netfilter_ipv4/ipt_pool.h
---- linux/include/linux/netfilter_ipv4/ipt_pool.h 2003-07-04 04:12:27.000000000 -0400
-+++ linux.stock/include/linux/netfilter_ipv4/ipt_pool.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,25 +0,0 @@
--#ifndef _IPT_POOL_H
--#define _IPT_POOL_H
--
--#include <linux/netfilter_ipv4/ip_pool.h>
--
--#define IPT_POOL_INV_SRC 0x00000001
--#define IPT_POOL_INV_DST 0x00000002
--#define IPT_POOL_DEL_SRC 0x00000004
--#define IPT_POOL_DEL_DST 0x00000008
--#define IPT_POOL_INV_MOD_SRC 0x00000010
--#define IPT_POOL_INV_MOD_DST 0x00000020
--#define IPT_POOL_MOD_SRC_ACCEPT 0x00000040
--#define IPT_POOL_MOD_DST_ACCEPT 0x00000080
--#define IPT_POOL_MOD_SRC_DROP 0x00000100
--#define IPT_POOL_MOD_DST_DROP 0x00000200
--
--/* match info */
--struct ipt_pool_info
--{
-- ip_pool_t src;
-- ip_pool_t dst;
-- unsigned flags;
--};
--
--#endif /*_IPT_POOL_H*/
-diff -Nurb linux/net/ipv4/netfilter/Config.in linux.stock/net/ipv4/netfilter/Config.in
---- linux/net/ipv4/netfilter/Config.in 2004-02-19 06:04:35.000000000 -0500
-+++ linux.stock/net/ipv4/netfilter/Config.in 2004-05-09 04:13:03.000000000 -0400
-@@ -7,12 +7,7 @@
- tristate 'Connection tracking (required for masq/NAT)' CONFIG_IP_NF_CONNTRACK
- if [ "$CONFIG_IP_NF_CONNTRACK" != "n" ]; then
- dep_tristate ' FTP protocol support' CONFIG_IP_NF_FTP $CONFIG_IP_NF_CONNTRACK
-- dep_tristate ' TFTP protocol support' CONFIG_IP_NF_TFTP $CONFIG_IP_NF_CONNTRACK
-- dep_tristate ' H.323 (netmeeting) support' CONFIG_IP_NF_H323 $CONFIG_IP_NF_CONNTRACK
- dep_tristate ' IRC protocol support' CONFIG_IP_NF_IRC $CONFIG_IP_NF_CONNTRACK
-- dep_tristate ' MMS protocol support' CONFIG_IP_NF_MMS $CONFIG_IP_NF_CONNTRACK
-- dep_tristate ' GRE protocol support' CONFIG_IP_NF_CT_PROTO_GRE $CONFIG_IP_NF_CONNTRACK
-- dep_tristate ' PPTP protocol support' CONFIG_IP_NF_PPTP $CONFIG_IP_NF_CT_PROTO_GRE
- fi
-
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-@@ -22,19 +17,11 @@
- if [ "$CONFIG_IP_NF_IPTABLES" != "n" ]; then
- # The simple matches.
- dep_tristate ' limit match support' CONFIG_IP_NF_MATCH_LIMIT $CONFIG_IP_NF_IPTABLES
--
-- dep_tristate ' IP address pool support' CONFIG_IP_NF_POOL $CONFIG_IP_NF_IPTABLES
-- if [ "$CONFIG_IP_NF_POOL" = "y" -o "$CONFIG_IP_NF_POOL" = "m" ]; then
-- bool ' enable statistics on pool usage' CONFIG_IP_POOL_STATISTICS n
-- fi
--
- dep_tristate ' MAC address match support' CONFIG_IP_NF_MATCH_MAC $CONFIG_IP_NF_IPTABLES
- dep_tristate ' Packet type match support' CONFIG_IP_NF_MATCH_PKTTYPE $CONFIG_IP_NF_IPTABLES
- dep_tristate ' netfilter MARK match support' CONFIG_IP_NF_MATCH_MARK $CONFIG_IP_NF_IPTABLES
- dep_tristate ' Multiple port match support' CONFIG_IP_NF_MATCH_MULTIPORT $CONFIG_IP_NF_IPTABLES
-- dep_tristate ' Multiple port with ranges match support' CONFIG_IP_NF_MATCH_MPORT $CONFIG_IP_NF_IPTABLES
- dep_tristate ' TOS match support' CONFIG_IP_NF_MATCH_TOS $CONFIG_IP_NF_IPTABLES
-- dep_tristate ' TIME match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_TIME $CONFIG_IP_NF_IPTABLES
- dep_tristate ' ECN match support' CONFIG_IP_NF_MATCH_ECN $CONFIG_IP_NF_IPTABLES
-
- dep_tristate ' DSCP match support' CONFIG_IP_NF_MATCH_DSCP $CONFIG_IP_NF_IPTABLES
-@@ -52,7 +39,6 @@
- fi
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' Unclean match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_UNCLEAN $CONFIG_IP_NF_IPTABLES
-- dep_tristate ' Webstr match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_WEBSTR $CONFIG_IP_NF_IPTABLES
- dep_tristate ' Owner match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_OWNER $CONFIG_IP_NF_IPTABLES
- fi
- # The targets
-@@ -70,29 +56,6 @@
- define_bool CONFIG_IP_NF_NAT_NEEDED y
- dep_tristate ' MASQUERADE target support' CONFIG_IP_NF_TARGET_MASQUERADE $CONFIG_IP_NF_NAT
- dep_tristate ' REDIRECT target support' CONFIG_IP_NF_TARGET_REDIRECT $CONFIG_IP_NF_NAT
-- dep_tristate ' Automatic port forwarding (autofw) target support' CONFIG_IP_NF_AUTOFW $CONFIG_IP_NF_NAT
-- dep_tristate ' TRIGGER target support (port-trigger)' CONFIG_IP_NF_TARGET_TRIGGER $CONFIG_IP_NF_NAT
-- if [ "$CONFIG_IP_NF_H323" = "m" ]; then
-- define_tristate CONFIG_IP_NF_NAT_H323 m
-- else
-- if [ "$CONFIG_IP_NF_H323" = "y" ]; then
-- define_tristate CONFIG_IP_NF_NAT_H323 $CONFIG_IP_NF_NAT
-- fi
-- fi
-- if [ "$CONFIG_IP_NF_PPTP" = "m" ]; then
-- define_tristate CONFIG_IP_NF_NAT_PPTP m
-- else
-- if [ "$CONFIG_IP_NF_PPTP" = "y" ]; then
-- define_tristate CONFIG_IP_NF_NAT_PPTP $CONFIG_IP_NF_NAT
-- fi
-- fi
-- if [ "$CONFIG_IP_NF_CT_PROTO_GRE" = "m" ]; then
-- define_tristate CONFIG_IP_NF_NAT_PROTO_GRE m
-- else
-- if [ "$CONFIG_IP_NF_CT_PROTO_GRE" = "y" ]; then
-- define_tristate CONFIG_IP_NF_NAT_PROTO_GRE $CONFIG_IP_NF_NAT
-- fi
-- fi
- bool ' NAT of local connections (READ HELP)' CONFIG_IP_NF_NAT_LOCAL
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' Basic SNMP-ALG support (EXPERIMENTAL)' CONFIG_IP_NF_NAT_SNMP_BASIC $CONFIG_IP_NF_NAT
-@@ -104,13 +67,6 @@
- define_tristate CONFIG_IP_NF_NAT_IRC $CONFIG_IP_NF_NAT
- fi
- fi
-- if [ "$CONFIG_IP_NF_MMS" = "m" ]; then
-- define_tristate CONFIG_IP_NF_NAT_MMS m
-- else
-- if [ "$CONFIG_IP_NF_MMS" = "y" ]; then
-- define_tristate CONFIG_IP_NF_NAT_MMS $CONFIG_IP_NF_NAT
-- fi
-- fi
- # If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
- # or $CONFIG_IP_NF_FTP (m or y), whichever is weaker. Argh.
- if [ "$CONFIG_IP_NF_FTP" = "m" ]; then
-@@ -120,13 +76,6 @@
- define_tristate CONFIG_IP_NF_NAT_FTP $CONFIG_IP_NF_NAT
- fi
- fi
-- if [ "$CONFIG_IP_NF_TFTP" = "m" ]; then
-- define_tristate CONFIG_IP_NF_NAT_TFTP m
-- else
-- if [ "$CONFIG_IP_NF_TFTP" = "y" ]; then
-- define_tristate CONFIG_IP_NF_NAT_TFTP $CONFIG_IP_NF_NAT
-- fi
-- fi
- fi
- fi
-
-diff -Nurb linux/net/ipv4/netfilter/Makefile linux.stock/net/ipv4/netfilter/Makefile
---- linux/net/ipv4/netfilter/Makefile 2004-02-19 06:04:35.000000000 -0500
-+++ linux.stock/net/ipv4/netfilter/Makefile 2004-05-09 04:13:03.000000000 -0400
-@@ -31,48 +31,20 @@
- # connection tracking
- obj-$(CONFIG_IP_NF_CONNTRACK) += ip_conntrack.o
-
--# H.323 support
--obj-$(CONFIG_IP_NF_H323) += ip_conntrack_h323.o
--obj-$(CONFIG_IP_NF_NAT_H323) += ip_nat_h323.o
--ifdef CONFIG_IP_NF_NAT_H323
-- export-objs += ip_conntrack_h323.o
--endif
--
--
--# connection tracking protocol helpers
--obj-$(CONFIG_IP_NF_CT_PROTO_GRE) += ip_conntrack_proto_gre.o
--ifdef CONFIG_IP_NF_CT_PROTO_GRE
-- export-objs += ip_conntrack_proto_gre.o
--endif
--
--# NAT protocol helpers
--obj-$(CONFIG_IP_NF_NAT_PROTO_GRE) += ip_nat_proto_gre.o
--
- # connection tracking helpers
--obj-$(CONFIG_IP_NF_MMS) += ip_conntrack_mms.o
--ifdef CONFIG_IP_NF_NAT_MMS
-- export-objs += ip_conntrack_mms.o
--endif
--obj-$(CONFIG_IP_NF_PPTP) += ip_conntrack_pptp.o
--ifdef CONFIG_IP_NF_NAT_PPTP
-- export-objs += ip_conntrack_pptp.o
--endif
--obj-$(CONFIG_IP_NF_TFTP) += ip_conntrack_tftp.o
- obj-$(CONFIG_IP_NF_FTP) += ip_conntrack_ftp.o
- ifdef CONFIG_IP_NF_NAT_FTP
- export-objs += ip_conntrack_ftp.o
- endif
-+
- obj-$(CONFIG_IP_NF_IRC) += ip_conntrack_irc.o
- ifdef CONFIG_IP_NF_NAT_IRC
- export-objs += ip_conntrack_irc.o
- endif
-
- # NAT helpers
--obj-$(CONFIG_IP_NF_NAT_PPTP) += ip_nat_pptp.o
--obj-$(CONFIG_IP_NF_NAT_TFTP) += ip_nat_tftp.o
- obj-$(CONFIG_IP_NF_NAT_FTP) += ip_nat_ftp.o
- obj-$(CONFIG_IP_NF_NAT_IRC) += ip_nat_irc.o
--obj-$(CONFIG_IP_NF_NAT_MMS) += ip_nat_mms.o
-
- # generic IP tables
- obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
-@@ -86,19 +58,12 @@
- obj-$(CONFIG_IP_NF_MATCH_HELPER) += ipt_helper.o
- obj-$(CONFIG_IP_NF_MATCH_LIMIT) += ipt_limit.o
- obj-$(CONFIG_IP_NF_MATCH_MARK) += ipt_mark.o
--obj-$(CONFIG_IP_NF_POOL) += ipt_pool.o ip_pool.o
- obj-$(CONFIG_IP_NF_MATCH_MAC) += ipt_mac.o
-
- obj-$(CONFIG_IP_NF_MATCH_PKTTYPE) += ipt_pkttype.o
- obj-$(CONFIG_IP_NF_MATCH_MULTIPORT) += ipt_multiport.o
--
--obj-$(CONFIG_IP_NF_MATCH_MPORT) += ipt_mport.o
--
- obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
- obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
--
--obj-$(CONFIG_IP_NF_MATCH_TIME) += ipt_time.o
--
- obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
- obj-$(CONFIG_IP_NF_MATCH_DSCP) += ipt_dscp.o
- obj-$(CONFIG_IP_NF_MATCH_AH_ESP) += ipt_ah.o ipt_esp.o
-@@ -109,7 +74,6 @@
- obj-$(CONFIG_IP_NF_MATCH_STATE) += ipt_state.o
- obj-$(CONFIG_IP_NF_MATCH_CONNTRACK) += ipt_conntrack.o
- obj-$(CONFIG_IP_NF_MATCH_UNCLEAN) += ipt_unclean.o
--obj-$(CONFIG_IP_NF_MATCH_WEBSTR) += ipt_webstr.o
- obj-$(CONFIG_IP_NF_MATCH_TCPMSS) += ipt_tcpmss.o
-
- # targets
-@@ -125,8 +89,6 @@
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
- obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
- obj-$(CONFIG_IP_NF_TARGET_TCPMSS) += ipt_TCPMSS.o
--obj-$(CONFIG_IP_NF_AUTOFW) += ip_autofw.o
--obj-$(CONFIG_IP_NF_TARGET_TRIGGER) += ipt_TRIGGER.o
-
- # generic ARP tables
- obj-$(CONFIG_IP_NF_ARPTABLES) += arp_tables.o
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_core.c linux.stock/net/ipv4/netfilter/ip_conntrack_core.c
---- linux/net/ipv4/netfilter/ip_conntrack_core.c 2003-08-12 07:33:45.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_core.c 2004-05-09 04:13:03.000000000 -0400
-@@ -47,7 +47,11 @@
-
- #define IP_CONNTRACK_VERSION "2.1"
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- DECLARE_RWLOCK(ip_conntrack_lock);
- DECLARE_RWLOCK(ip_conntrack_expect_tuple_lock);
-@@ -62,29 +66,6 @@
- struct list_head *ip_conntrack_hash;
- static kmem_cache_t *ip_conntrack_cachep;
-
--#define SECS * HZ
--#define MINS * 60 SECS
--#define HOURS * 60 MINS
--#define DAYS * 24 HOURS
--
--int sysctl_ip_conntrack_tcp_timeouts[10] = {
-- 30 MINS, /* TCP_CONNTRACK_NONE, */
-- 5 DAYS, /* TCP_CONNTRACK_ESTABLISHED, */
-- 2 MINS, /* TCP_CONNTRACK_SYN_SENT, */
-- 60 SECS, /* TCP_CONNTRACK_SYN_RECV, */
-- 2 MINS, /* TCP_CONNTRACK_FIN_WAIT, */
-- 2 MINS, /* TCP_CONNTRACK_TIME_WAIT, */
-- 10 SECS, /* TCP_CONNTRACK_CLOSE, */
-- 60 SECS, /* TCP_CONNTRACK_CLOSE_WAIT, */
-- 30 SECS, /* TCP_CONNTRACK_LAST_ACK, */
-- 2 MINS, /* TCP_CONNTRACK_LISTEN, */
--};
--
--int sysctl_ip_conntrack_udp_timeouts[2] = {
-- 30 SECS, /* UNREPLIED */
-- 180 SECS /* ASSURED */
--};
--
- extern struct ip_conntrack_protocol ip_conntrack_generic_protocol;
-
- static inline int proto_cmpfn(const struct ip_conntrack_protocol *curr,
-@@ -129,6 +110,9 @@
- static inline u_int32_t
- hash_conntrack(const struct ip_conntrack_tuple *tuple)
- {
-+#if 0
-+ dump_tuple(tuple);
-+#endif
- /* ntohl because more differences in low bits. */
- /* To ensure that halves of the same connection don't hash
- clash, we add the source per-proto again. */
-@@ -160,8 +144,6 @@
- tuple->dst.ip = iph->daddr;
- tuple->dst.protonum = iph->protocol;
-
-- tuple->src.u.all = tuple->dst.u.all = 0;
--
- ret = protocol->pkt_to_tuple((u_int32_t *)iph + iph->ihl,
- len - 4*iph->ihl,
- tuple);
-@@ -177,8 +159,6 @@
- inverse->dst.ip = orig->src.ip;
- inverse->dst.protonum = orig->dst.protonum;
-
-- inverse->src.u.all = inverse->dst.u.all = 0;
--
- return protocol->invert_tuple(inverse, orig);
- }
-
-@@ -196,8 +176,8 @@
- static void
- destroy_expect(struct ip_conntrack_expect *exp)
- {
-- DEBUGP("destroy_expect(%p) use=%d\n", exp, atomic_read(&exp->use));
-- IP_NF_ASSERT(atomic_read(&exp->use));
-+ DEBUGP("destroy_expect(%p) use=%d\n", exp, atomic_read(exp->use));
-+ IP_NF_ASSERT(atomic_read(exp->use));
- IP_NF_ASSERT(!timer_pending(&exp->timeout));
-
- kfree(exp);
-@@ -267,11 +247,11 @@
- static void unexpect_related(struct ip_conntrack_expect *expect)
- {
- IP_NF_ASSERT(expect->expectant);
-+ IP_NF_ASSERT(expect->expectant->helper);
- /* if we are supposed to have a timer, but we can't delete
- * it: race condition. __unexpect_related will
- * be calledd by timeout function */
-- if (expect->expectant->helper
-- && expect->expectant->helper->timeout
-+ if (expect->expectant->helper->timeout
- && !del_timer(&expect->timeout))
- return;
-
-@@ -580,6 +560,7 @@
- if (!h) {
- /* Locally generated ICMPs will match inverted if they
- haven't been SNAT'ed yet */
-+ /* FIXME: NAT code has to handle half-done double NAT --RR */
- if (hooknum == NF_IP_LOCAL_OUT)
- h = ip_conntrack_find_get(&origtuple, NULL);
-
-@@ -725,7 +706,6 @@
-
- /* If the expectation is dying, then this is a looser. */
- if (expected
-- && expected->expectant->helper
- && expected->expectant->helper->timeout
- && ! del_timer(&expected->timeout))
- expected = NULL;
-@@ -744,7 +724,6 @@
- conntrack->master = expected;
- expected->sibling = conntrack;
- LIST_DELETE(&ip_conntrack_expect_list, expected);
-- INIT_LIST_HEAD(&expected->list);
- expected->expectant->expecting--;
- nf_conntrack_get(&master_ct(conntrack)->infos[0]);
- }
-@@ -821,9 +800,23 @@
- int set_reply;
- int ret;
-
-+ /* FIXME: Do this right please. --RR */
- (*pskb)->nfcache |= NFC_UNKNOWN;
-
- /* Doesn't cover locally-generated broadcast, so not worth it. */
-+#if 0
-+ /* Ignore broadcast: no `connection'. */
-+ if ((*pskb)->pkt_type == PACKET_BROADCAST) {
-+ printk("Broadcast packet!\n");
-+ return NF_ACCEPT;
-+ } else if (((*pskb)->nh.iph->daddr & htonl(0x000000FF))
-+ == htonl(0x000000FF)) {
-+ printk("Should bcast: %u.%u.%u.%u->%u.%u.%u.%u (sk=%p, ptype=%u)\n",
-+ NIPQUAD((*pskb)->nh.iph->saddr),
-+ NIPQUAD((*pskb)->nh.iph->daddr),
-+ (*pskb)->sk, (*pskb)->pkt_type);
-+ }
-+#endif
-
- /* Previously seen (loopback)? Ignore. Do this before
- fragment check. */
-@@ -943,8 +936,8 @@
- * so there is no need to use the tuple lock too */
-
- DEBUGP("ip_conntrack_expect_related %p\n", related_to);
-- DEBUGP("tuple: "); DUMP_TUPLE_RAW(&expect->tuple);
-- DEBUGP("mask: "); DUMP_TUPLE_RAW(&expect->mask);
-+ DEBUGP("tuple: "); DUMP_TUPLE(&expect->tuple);
-+ DEBUGP("mask: "); DUMP_TUPLE(&expect->mask);
-
- old = LIST_FIND(&ip_conntrack_expect_list, resent_expect,
- struct ip_conntrack_expect *, &expect->tuple,
-@@ -954,8 +947,7 @@
- pointing into the payload - otherwise we should have to copy
- the data filled out by the helper over the old one */
- DEBUGP("expect_related: resent packet\n");
-- if (related_to->helper &&
-- related_to->helper->timeout) {
-+ if (related_to->helper->timeout) {
- if (!del_timer(&old->timeout)) {
- /* expectation is dying. Fall through */
- old = NULL;
-@@ -970,32 +962,26 @@
- WRITE_UNLOCK(&ip_conntrack_lock);
- return -EEXIST;
- }
-- } else if (related_to->helper &&
-- related_to->helper->max_expected &&
-+ } else if (related_to->helper->max_expected &&
- related_to->expecting >= related_to->helper->max_expected) {
- struct list_head *cur_item;
- /* old == NULL */
-- if (!(related_to->helper->flags &
-- IP_CT_HELPER_F_REUSE_EXPECT)) {
-- WRITE_UNLOCK(&ip_conntrack_lock);
- if (net_ratelimit())
- printk(KERN_WARNING
- "ip_conntrack: max number of expected "
- "connections %i of %s reached for "
-- "%u.%u.%u.%u->%u.%u.%u.%u\n",
-+ "%u.%u.%u.%u->%u.%u.%u.%u%s\n",
- related_to->helper->max_expected,
- related_to->helper->name,
- NIPQUAD(related_to->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip),
-- NIPQUAD(related_to->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip));
-+ NIPQUAD(related_to->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip),
-+ related_to->helper->flags & IP_CT_HELPER_F_REUSE_EXPECT ?
-+ ", reusing" : "");
-+ if (!(related_to->helper->flags &
-+ IP_CT_HELPER_F_REUSE_EXPECT)) {
-+ WRITE_UNLOCK(&ip_conntrack_lock);
- return -EPERM;
- }
-- DEBUGP("ip_conntrack: max number of expected "
-- "connections %i of %s reached for "
-- "%u.%u.%u.%u->%u.%u.%u.%u, reusing\n",
-- related_to->helper->max_expected,
-- related_to->helper->name,
-- NIPQUAD(related_to->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip),
-- NIPQUAD(related_to->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip));
-
- /* choose the the oldest expectation to evict */
- list_for_each(cur_item, &related_to->sibling_list) {
-@@ -1055,8 +1041,7 @@
- /* add to global list of expectations */
- list_prepend(&ip_conntrack_expect_list, &new->list);
- /* add and start timer if required */
-- if (related_to->helper &&
-- related_to->helper->timeout) {
-+ if (related_to->helper->timeout) {
- init_timer(&new->timeout);
- new->timeout.data = (unsigned long)new;
- new->timeout.function = expectation_timed_out;
-@@ -1079,10 +1064,11 @@
-
- MUST_BE_READ_LOCKED(&ip_conntrack_lock);
- WRITE_LOCK(&ip_conntrack_expect_tuple_lock);
-+
- DEBUGP("change_expect:\n");
-- DEBUGP("exp tuple: "); DUMP_TUPLE_RAW(&expect->tuple);
-- DEBUGP("exp mask: "); DUMP_TUPLE_RAW(&expect->mask);
-- DEBUGP("newtuple: "); DUMP_TUPLE_RAW(newtuple);
-+ DEBUGP("exp tuple: "); DUMP_TUPLE(&expect->tuple);
-+ DEBUGP("exp mask: "); DUMP_TUPLE(&expect->mask);
-+ DEBUGP("newtuple: "); DUMP_TUPLE(newtuple);
- if (expect->ct_tuple.dst.protonum == 0) {
- /* Never seen before */
- DEBUGP("change expect: never seen before\n");
-@@ -1360,8 +1346,6 @@
- 0, NULL };
-
- #define NET_IP_CONNTRACK_MAX 2089
--#define NET_IP_CONNTRACK_TCP_TIMEOUTS 2090
--#define NET_IP_CONNTRACK_UDP_TIMEOUTS 2091
- #define NET_IP_CONNTRACK_MAX_NAME "ip_conntrack_max"
-
- #ifdef CONFIG_SYSCTL
-@@ -1370,14 +1354,6 @@
- static ctl_table ip_conntrack_table[] = {
- { NET_IP_CONNTRACK_MAX, NET_IP_CONNTRACK_MAX_NAME, &ip_conntrack_max,
- sizeof(ip_conntrack_max), 0644, NULL, proc_dointvec },
-- { NET_IP_CONNTRACK_TCP_TIMEOUTS, "ip_conntrack_tcp_timeouts",
-- &sysctl_ip_conntrack_tcp_timeouts,
-- sizeof(sysctl_ip_conntrack_tcp_timeouts),
-- 0644, NULL, &proc_dointvec_jiffies, &sysctl_jiffies },
-- { NET_IP_CONNTRACK_UDP_TIMEOUTS, "ip_conntrack_udp_timeouts",
-- &sysctl_ip_conntrack_udp_timeouts,
-- sizeof(sysctl_ip_conntrack_udp_timeouts),
-- 0644, NULL, &proc_dointvec_jiffies, &sysctl_jiffies },
- { 0 }
- };
-
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_ftp.c linux.stock/net/ipv4/netfilter/ip_conntrack_ftp.c
---- linux/net/ipv4/netfilter/ip_conntrack_ftp.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_ftp.c 2004-05-09 04:13:03.000000000 -0400
-@@ -24,7 +24,11 @@
- static int loose = 0;
- MODULE_PARM(loose, "i");
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- static int try_rfc959(const char *, size_t, u_int32_t [], char);
- static int try_eprt(const char *, size_t, u_int32_t [], char);
-@@ -191,6 +195,16 @@
- }
-
- if (strnicmp(data, pattern, plen) != 0) {
-+#if 0
-+ size_t i;
-+
-+ DEBUGP("ftp: string mismatch\n");
-+ for (i = 0; i < plen; i++) {
-+ DEBUGFTP("ftp:char %u `%c'(%u) vs `%c'(%u)\n",
-+ i, data[i], data[i],
-+ pattern[i], pattern[i]);
-+ }
-+#endif
- return 0;
- }
-
-@@ -214,6 +228,7 @@
- return 1;
- }
-
-+/* FIXME: This should be in userspace. Later. */
- static int help(const struct iphdr *iph, size_t len,
- struct ip_conntrack *ct,
- enum ip_conntrack_info ctinfo)
-@@ -249,6 +264,7 @@
- }
-
- /* Checksum invalid? Ignore. */
-+ /* FIXME: Source route IP option packets --RR */
- if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
- csum_partial((char *)tcph, tcplen, 0))) {
- DEBUGP("ftp_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_h323.c linux.stock/net/ipv4/netfilter/ip_conntrack_h323.c
---- linux/net/ipv4/netfilter/ip_conntrack_h323.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_h323.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,302 +0,0 @@
--/*
-- * H.323 'brute force' extension for H.323 connection tracking.
-- * Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-- *
-- * Based on ip_masq_h323.c for 2.2 kernels from CoRiTel, Sofia project.
-- * (http://www.coritel.it/projects/sofia/nat/)
-- * Uses Sampsa Ranta's excellent idea on using expectfn to 'bind'
-- * the unregistered helpers to the conntrack entries.
-- */
--
--
--#include <linux/module.h>
--#include <linux/netfilter.h>
--#include <linux/ip.h>
--#include <net/checksum.h>
--#include <net/tcp.h>
--
--#include <linux/netfilter_ipv4/lockhelp.h>
--#include <linux/netfilter_ipv4/ip_conntrack.h>
--#include <linux/netfilter_ipv4/ip_conntrack_core.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_tuple.h>
--#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
--
--MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
--MODULE_DESCRIPTION("H.323 'brute force' connection tracking module");
--MODULE_LICENSE("GPL");
--
--DECLARE_LOCK(ip_h323_lock);
--struct module *ip_conntrack_h323 = THIS_MODULE;
--
--#define DEBUGP(format, args...)
--
--static int h245_help(const struct iphdr *iph, size_t len,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo)
--{
-- struct tcphdr *tcph = (void *)iph + iph->ihl * 4;
-- unsigned char *data = (unsigned char *) tcph + tcph->doff * 4;
-- unsigned char *data_limit;
-- u_int32_t tcplen = len - iph->ihl * 4;
-- u_int32_t datalen = tcplen - tcph->doff * 4;
-- int dir = CTINFO2DIR(ctinfo);
-- struct ip_ct_h225_master *info = &ct->help.ct_h225_info;
-- struct ip_conntrack_expect expect, *exp = &expect;
-- struct ip_ct_h225_expect *exp_info = &exp->help.exp_h225_info;
-- u_int16_t data_port;
-- u_int32_t data_ip;
-- unsigned int i;
--
-- DEBUGP("ct_h245_help: help entered %u.%u.%u.%u:%u->%u.%u.%u.%u:%u\n",
-- NIPQUAD(iph->saddr), ntohs(tcph->source),
-- NIPQUAD(iph->daddr), ntohs(tcph->dest));
--
-- /* Can't track connections formed before we registered */
-- if (!info)
-- return NF_ACCEPT;
--
-- /* Until there's been traffic both ways, don't look in packets. */
-- if (ctinfo != IP_CT_ESTABLISHED
-- && ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
-- DEBUGP("ct_h245_help: Conntrackinfo = %u\n", ctinfo);
-- return NF_ACCEPT;
-- }
--
-- /* Not whole TCP header or too short packet? */
-- if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4 + 5) {
-- DEBUGP("ct_h245_help: tcplen = %u\n", (unsigned)tcplen);
-- return NF_ACCEPT;
-- }
--
-- /* Checksum invalid? Ignore. */
-- if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-- csum_partial((char *)tcph, tcplen, 0))) {
-- DEBUGP("ct_h245_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-- tcph, tcplen, NIPQUAD(iph->saddr),
-- NIPQUAD(iph->daddr));
-- return NF_ACCEPT;
-- }
--
-- data_limit = (unsigned char *) data + datalen;
-- /* bytes: 0123 45
-- ipadrr port */
-- for (i = 0; data < (data_limit - 5); data++, i++) {
-- memcpy(&data_ip, data, sizeof(u_int32_t));
-- if (data_ip == iph->saddr) {
-- memcpy(&data_port, data + 4, sizeof(u_int16_t));
-- memset(&expect, 0, sizeof(expect));
-- /* update the H.225 info */
-- DEBUGP("ct_h245_help: new RTCP/RTP requested %u.%u.%u.%u:->%u.%u.%u.%u:%u\n",
-- NIPQUAD(ct->tuplehash[!dir].tuple.src.ip),
-- NIPQUAD(iph->saddr), ntohs(data_port));
-- LOCK_BH(&ip_h323_lock);
-- info->is_h225 = H225_PORT + 1;
-- exp_info->port = data_port;
-- exp_info->dir = dir;
-- exp_info->offset = i;
--
-- exp->seq = ntohl(tcph->seq) + i;
--
-- exp->tuple = ((struct ip_conntrack_tuple)
-- { { ct->tuplehash[!dir].tuple.src.ip,
-- { 0 } },
-- { data_ip,
-- { data_port },
-- IPPROTO_UDP }});
-- exp->mask = ((struct ip_conntrack_tuple)
-- { { 0xFFFFFFFF, { 0 } },
-- { 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
--
-- exp->expectfn = NULL;
--
-- /* Ignore failure; should only happen with NAT */
-- ip_conntrack_expect_related(ct, exp);
--
-- UNLOCK_BH(&ip_h323_lock);
-- }
-- }
--
-- return NF_ACCEPT;
--
--}
--
--/* H.245 helper is not registered! */
--static struct ip_conntrack_helper h245 =
-- { { NULL, NULL },
-- "H.245", /* name */
-- IP_CT_HELPER_F_REUSE_EXPECT, /* flags */
-- NULL, /* module */
-- 8, /* max_ expected */
-- 240, /* timeout */
-- { { 0, { 0 } }, /* tuple */
-- { 0, { 0 }, IPPROTO_TCP } },
-- { { 0, { 0xFFFF } }, /* mask */
-- { 0, { 0 }, 0xFFFF } },
-- h245_help /* helper */
-- };
--
--static int h225_expect(struct ip_conntrack *ct)
--{
-- WRITE_LOCK(&ip_conntrack_lock);
-- ct->helper = &h245;
-- DEBUGP("h225_expect: helper for %p added\n", ct);
-- WRITE_UNLOCK(&ip_conntrack_lock);
--
-- return NF_ACCEPT; /* unused */
--}
--
--static int h225_help(const struct iphdr *iph, size_t len,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo)
--{
-- struct tcphdr *tcph = (void *)iph + iph->ihl * 4;
-- unsigned char *data = (unsigned char *) tcph + tcph->doff * 4;
-- unsigned char *data_limit;
-- u_int32_t tcplen = len - iph->ihl * 4;
-- u_int32_t datalen = tcplen - tcph->doff * 4;
-- int dir = CTINFO2DIR(ctinfo);
-- struct ip_ct_h225_master *info = &ct->help.ct_h225_info;
-- struct ip_conntrack_expect expect, *exp = &expect;
-- struct ip_ct_h225_expect *exp_info = &exp->help.exp_h225_info;
-- u_int16_t data_port;
-- u_int32_t data_ip;
-- unsigned int i;
--
-- DEBUGP("ct_h225_help: help entered %u.%u.%u.%u:%u->%u.%u.%u.%u:%u\n",
-- NIPQUAD(iph->saddr), ntohs(tcph->source),
-- NIPQUAD(iph->daddr), ntohs(tcph->dest));
--
-- /* Can't track connections formed before we registered */
-- if (!info)
-- return NF_ACCEPT;
--
-- /* Until there's been traffic both ways, don't look in packets. */
-- if (ctinfo != IP_CT_ESTABLISHED
-- && ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
-- DEBUGP("ct_h225_help: Conntrackinfo = %u\n", ctinfo);
-- return NF_ACCEPT;
-- }
--
-- /* Not whole TCP header or too short packet? */
-- if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4 + 5) {
-- DEBUGP("ct_h225_help: tcplen = %u\n", (unsigned)tcplen);
-- return NF_ACCEPT;
-- }
--
-- /* Checksum invalid? Ignore. */
-- if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-- csum_partial((char *)tcph, tcplen, 0))) {
-- DEBUGP("ct_h225_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-- tcph, tcplen, NIPQUAD(iph->saddr),
-- NIPQUAD(iph->daddr));
-- return NF_ACCEPT;
-- }
--
-- data_limit = (unsigned char *) data + datalen;
-- /* bytes: 0123 45
-- ipadrr port */
-- for (i = 0; data < (data_limit - 5); data++, i++) {
-- memcpy(&data_ip, data, sizeof(u_int32_t));
-- if (data_ip == iph->saddr) {
-- memcpy(&data_port, data + 4, sizeof(u_int16_t));
-- if (data_port == tcph->source) {
-- /* Signal address */
-- DEBUGP("ct_h225_help: sourceCallSignalAddress from %u.%u.%u.%u\n",
-- NIPQUAD(iph->saddr));
-- /* Update the H.225 info so that NAT can mangle the address/port
-- even when we have no expected connection! */
--#ifdef CONFIG_IP_NF_NAT_NEEDED
-- LOCK_BH(&ip_h323_lock);
-- info->dir = dir;
-- info->seq[IP_CT_DIR_ORIGINAL] = ntohl(tcph->seq) + i;
-- info->offset[IP_CT_DIR_ORIGINAL] = i;
-- UNLOCK_BH(&ip_h323_lock);
--#endif
-- } else {
-- memset(&expect, 0, sizeof(expect));
--
-- /* update the H.225 info */
-- LOCK_BH(&ip_h323_lock);
-- info->is_h225 = H225_PORT;
-- exp_info->port = data_port;
-- exp_info->dir = dir;
-- exp_info->offset = i;
--
-- exp->seq = ntohl(tcph->seq) + i;
--
-- exp->tuple = ((struct ip_conntrack_tuple)
-- { { ct->tuplehash[!dir].tuple.src.ip,
-- { 0 } },
-- { data_ip,
-- { data_port },
-- IPPROTO_TCP }});
-- exp->mask = ((struct ip_conntrack_tuple)
-- { { 0xFFFFFFFF, { 0 } },
-- { 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
--
-- exp->expectfn = h225_expect;
--
-- /* Ignore failure */
-- ip_conntrack_expect_related(ct, exp);
--
-- DEBUGP("ct_h225_help: new H.245 requested %u.%u.%u.%u->%u.%u.%u.%u:%u\n",
-- NIPQUAD(ct->tuplehash[!dir].tuple.src.ip),
-- NIPQUAD(iph->saddr), ntohs(data_port));
--
-- UNLOCK_BH(&ip_h323_lock);
-- }
--#ifdef CONFIG_IP_NF_NAT_NEEDED
-- } else if (data_ip == iph->daddr) {
-- memcpy(&data_port, data + 4, sizeof(u_int16_t));
-- if (data_port == tcph->dest) {
-- /* Signal address */
-- DEBUGP("ct_h225_help: destCallSignalAddress %u.%u.%u.%u\n",
-- NIPQUAD(iph->daddr));
-- /* Update the H.225 info so that NAT can mangle the address/port
-- even when we have no expected connection! */
-- LOCK_BH(&ip_h323_lock);
-- info->dir = dir;
-- info->seq[IP_CT_DIR_REPLY] = ntohl(tcph->seq) + i;
-- info->offset[IP_CT_DIR_REPLY] = i;
-- UNLOCK_BH(&ip_h323_lock);
-- }
--#endif
-- }
-- }
--
-- return NF_ACCEPT;
--
--}
--
--static struct ip_conntrack_helper h225 =
-- { { NULL, NULL },
-- "H.225", /* name */
-- IP_CT_HELPER_F_REUSE_EXPECT, /* flags */
-- THIS_MODULE, /* module */
-- 2, /* max_expected */
-- 240, /* timeout */
-- { { 0, { __constant_htons(H225_PORT) } }, /* tuple */
-- { 0, { 0 }, IPPROTO_TCP } },
-- { { 0, { 0xFFFF } }, /* mask */
-- { 0, { 0 }, 0xFFFF } },
-- h225_help /* helper */
-- };
--
--static int __init init(void)
--{
-- return ip_conntrack_helper_register(&h225);
--}
--
--static void __exit fini(void)
--{
-- /* Unregister H.225 helper */
-- ip_conntrack_helper_unregister(&h225);
--}
--
--#ifdef CONFIG_IP_NF_NAT_NEEDED
--EXPORT_SYMBOL(ip_h323_lock);
--#endif
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_mms.c linux.stock/net/ipv4/netfilter/ip_conntrack_mms.c
---- linux/net/ipv4/netfilter/ip_conntrack_mms.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_mms.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,292 +0,0 @@
--/* MMS extension for IP connection tracking
-- * (C) 2002 by Filip Sneppe <filip.sneppe@cronos.be>
-- * based on ip_conntrack_ftp.c and ip_conntrack_irc.c
-- *
-- * ip_conntrack_mms.c v0.3 2002-09-22
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License
-- * as published by the Free Software Foundation; either version
-- * 2 of the License, or (at your option) any later version.
-- *
-- * Module load syntax:
-- * insmod ip_conntrack_mms.o ports=port1,port2,...port<MAX_PORTS>
-- *
-- * Please give the ports of all MMS servers You wish to connect to.
-- * If you don't specify ports, the default will be TCP port 1755.
-- *
-- * More info on MMS protocol, firewalls and NAT:
-- * http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwmt/html/MMSFirewall.asp
-- * http://www.microsoft.com/windows/windowsmedia/serve/firewall.asp
-- *
-- * The SDP project people are reverse-engineering MMS:
-- * http://get.to/sdp
-- */
--
--#include <linux/config.h>
--#include <linux/module.h>
--#include <linux/netfilter.h>
--#include <linux/ip.h>
--#include <linux/ctype.h>
--#include <net/checksum.h>
--#include <net/tcp.h>
--
--#include <linux/netfilter_ipv4/lockhelp.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_mms.h>
--
--DECLARE_LOCK(ip_mms_lock);
--struct module *ip_conntrack_mms = THIS_MODULE;
--
--#define MAX_PORTS 8
--static int ports[MAX_PORTS];
--static int ports_c;
--#ifdef MODULE_PARM
--MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
--#endif
--
--#define DEBUGP(format, args...)
--
--#ifdef CONFIG_IP_NF_NAT_NEEDED
--EXPORT_SYMBOL(ip_mms_lock);
--#endif
--
--MODULE_AUTHOR("Filip Sneppe <filip.sneppe@cronos.be>");
--MODULE_DESCRIPTION("Microsoft Windows Media Services (MMS) connection tracking module");
--MODULE_LICENSE("GPL");
--
--/* #define isdigit(c) (c >= '0' && c <= '9') */
--
--/* copied from drivers/usb/serial/io_edgeport.c - not perfect but will do the trick */
--static void unicode_to_ascii (char *string, short *unicode, int unicode_size)
--{
-- int i;
-- for (i = 0; i < unicode_size; ++i) {
-- string[i] = (char)(unicode[i]);
-- }
-- string[unicode_size] = 0x00;
--}
--
--__inline static int atoi(char *s)
--{
-- int i=0;
-- while (isdigit(*s)) {
-- i = i*10 + *(s++) - '0';
-- }
-- return i;
--}
--
--/* convert ip address string like "192.168.0.10" to unsigned int */
--__inline static u_int32_t asciiiptoi(char *s)
--{
-- unsigned int i, j, k;
--
-- for(i=k=0; k<3; ++k, ++s, i<<=8) {
-- i+=atoi(s);
-- for(j=0; (*(++s) != '.') && (j<3); ++j)
-- ;
-- }
-- i+=atoi(s);
-- return ntohl(i);
--}
--
--int parse_mms(const char *data,
-- const unsigned int datalen,
-- u_int32_t *mms_ip,
-- u_int16_t *mms_proto,
-- u_int16_t *mms_port,
-- char **mms_string_b,
-- char **mms_string_e,
-- char **mms_padding_e)
--{
-- int unicode_size, i;
-- char tempstring[28]; /* "\\255.255.255.255\UDP\65535" */
-- char getlengthstring[28];
--
-- for(unicode_size=0;
-- (char) *(data+(MMS_SRV_UNICODE_STRING_OFFSET+unicode_size*2)) != (char)0;
-- unicode_size++)
-- if ((unicode_size == 28) || (MMS_SRV_UNICODE_STRING_OFFSET+unicode_size*2 >= datalen))
-- return -1; /* out of bounds - incomplete packet */
--
-- unicode_to_ascii(tempstring, (short *)(data+MMS_SRV_UNICODE_STRING_OFFSET), unicode_size);
-- DEBUGP("ip_conntrack_mms: offset 60: %s\n", (const char *)(tempstring));
--
-- /* IP address ? */
-- *mms_ip = asciiiptoi(tempstring+2);
--
-- i=sprintf(getlengthstring, "%u.%u.%u.%u", HIPQUAD(*mms_ip));
--
-- /* protocol ? */
-- if(strncmp(tempstring+3+i, "TCP", 3)==0)
-- *mms_proto = IPPROTO_TCP;
-- else if(strncmp(tempstring+3+i, "UDP", 3)==0)
-- *mms_proto = IPPROTO_UDP;
--
-- /* port ? */
-- *mms_port = atoi(tempstring+7+i);
--
-- /* we store a pointer to the beginning of the "\\a.b.c.d\proto\port"
-- unicode string, one to the end of the string, and one to the end
-- of the packet, since we must keep track of the number of bytes
-- between end of the unicode string and the end of packet (padding) */
-- *mms_string_b = (char *)(data + MMS_SRV_UNICODE_STRING_OFFSET);
-- *mms_string_e = (char *)(data + MMS_SRV_UNICODE_STRING_OFFSET + unicode_size * 2);
-- *mms_padding_e = (char *)(data + datalen); /* looks funny, doesn't it */
-- return 0;
--}
--
--
--static int help(const struct iphdr *iph, size_t len,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo)
--{
-- /* tcplen not negative guaranteed by ip_conntrack_tcp.c */
-- struct tcphdr *tcph = (void *)iph + iph->ihl * 4;
-- const char *data = (const char *)tcph + tcph->doff * 4;
-- unsigned int tcplen = len - iph->ihl * 4;
-- unsigned int datalen = tcplen - tcph->doff * 4;
-- int dir = CTINFO2DIR(ctinfo);
-- struct ip_conntrack_expect expect, *exp = &expect;
-- struct ip_ct_mms_expect *exp_mms_info = &exp->help.exp_mms_info;
--
-- u_int32_t mms_ip;
-- u_int16_t mms_proto;
-- char mms_proto_string[8];
-- u_int16_t mms_port;
-- char *mms_string_b, *mms_string_e, *mms_padding_e;
--
-- /* Until there's been traffic both ways, don't look in packets. */
-- if (ctinfo != IP_CT_ESTABLISHED
-- && ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY) {
-- DEBUGP("ip_conntrack_mms: Conntrackinfo = %u\n", ctinfo);
-- return NF_ACCEPT;
-- }
--
-- /* Not whole TCP header? */
-- if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff*4) {
-- DEBUGP("ip_conntrack_mms: tcplen = %u\n", (unsigned)tcplen);
-- return NF_ACCEPT;
-- }
--
-- /* Checksum invalid? Ignore. */
-- if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-- csum_partial((char *)tcph, tcplen, 0))) {
-- DEBUGP("mms_help: bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
-- tcph, tcplen, NIPQUAD(iph->saddr),
-- NIPQUAD(iph->daddr));
-- return NF_ACCEPT;
-- }
--
-- /* Only look at packets with 0x00030002/196610 on bytes 36->39 of TCP payload */
-- if( (MMS_SRV_MSG_OFFSET < datalen) &&
-- ((*(u32 *)(data+MMS_SRV_MSG_OFFSET)) == MMS_SRV_MSG_ID)) {
-- DEBUGP("ip_conntrack_mms: offset 37: %u %u %u %u, datalen:%u\n",
-- (u8)*(data+36), (u8)*(data+37),
-- (u8)*(data+38), (u8)*(data+39),
-- datalen);
-- if(parse_mms(data, datalen, &mms_ip, &mms_proto, &mms_port,
-- &mms_string_b, &mms_string_e, &mms_padding_e))
-- if(net_ratelimit())
-- printk(KERN_WARNING
-- "ip_conntrack_mms: Unable to parse data payload\n");
--
-- memset(&expect, 0, sizeof(expect));
--
-- sprintf(mms_proto_string, "(%u)", mms_proto);
-- DEBUGP("ip_conntrack_mms: adding %s expectation %u.%u.%u.%u -> %u.%u.%u.%u:%u\n",
-- mms_proto == IPPROTO_TCP ? "TCP"
-- : mms_proto == IPPROTO_UDP ? "UDP":mms_proto_string,
-- NIPQUAD(ct->tuplehash[!dir].tuple.src.ip),
-- NIPQUAD(mms_ip),
-- mms_port);
--
-- /* it's possible that the client will just ask the server to tunnel
-- the stream over the same TCP session (from port 1755): there's
-- shouldn't be a need to add an expectation in that case, but it
-- makes NAT packet mangling so much easier */
-- LOCK_BH(&ip_mms_lock);
--
-- DEBUGP("ip_conntrack_mms: tcph->seq = %u\n", tcph->seq);
--
-- exp->seq = ntohl(tcph->seq) + (mms_string_b - data);
-- exp_mms_info->len = (mms_string_e - mms_string_b);
-- exp_mms_info->padding = (mms_padding_e - mms_string_e);
-- exp_mms_info->port = mms_port;
--
-- DEBUGP("ip_conntrack_mms: wrote info seq=%u (ofs=%u), len=%d, padding=%u\n",
-- exp->seq, (mms_string_e - data), exp_mms_info->len, exp_mms_info->padding);
--
-- exp->tuple = ((struct ip_conntrack_tuple)
-- { { ct->tuplehash[!dir].tuple.src.ip, { 0 } },
-- { mms_ip,
-- { (__u16) ntohs(mms_port) },
-- mms_proto } }
-- );
-- exp->mask = ((struct ip_conntrack_tuple)
-- { { 0xFFFFFFFF, { 0 } },
-- { 0xFFFFFFFF, { 0xFFFF }, 0xFFFF }});
-- exp->expectfn = NULL;
-- ip_conntrack_expect_related(ct, &expect);
-- UNLOCK_BH(&ip_mms_lock);
-- }
--
-- return NF_ACCEPT;
--}
--
--static struct ip_conntrack_helper mms[MAX_PORTS];
--static char mms_names[MAX_PORTS][10];
--
--/* Not __exit: called from init() */
--static void fini(void)
--{
-- int i;
-- for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-- DEBUGP("ip_conntrack_mms: unregistering helper for port %d\n",
-- ports[i]);
-- ip_conntrack_helper_unregister(&mms[i]);
-- }
--}
--
--static int __init init(void)
--{
-- int i, ret;
-- char *tmpname;
--
-- if (ports[0] == 0)
-- ports[0] = MMS_PORT;
--
-- for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-- memset(&mms[i], 0, sizeof(struct ip_conntrack_helper));
-- mms[i].tuple.src.u.tcp.port = htons(ports[i]);
-- mms[i].tuple.dst.protonum = IPPROTO_TCP;
-- mms[i].mask.src.u.tcp.port = 0xFFFF;
-- mms[i].mask.dst.protonum = 0xFFFF;
-- mms[i].max_expected = 1;
-- mms[i].timeout = 0;
-- mms[i].flags = IP_CT_HELPER_F_REUSE_EXPECT;
-- mms[i].me = THIS_MODULE;
-- mms[i].help = help;
--
-- tmpname = &mms_names[i][0];
-- if (ports[i] == MMS_PORT)
-- sprintf(tmpname, "mms");
-- else
-- sprintf(tmpname, "mms-%d", ports[i]);
-- mms[i].name = tmpname;
--
-- DEBUGP("ip_conntrack_mms: registering helper for port %d\n",
-- ports[i]);
-- ret = ip_conntrack_helper_register(&mms[i]);
--
-- if (ret) {
-- fini();
-- return ret;
-- }
-- ports_c++;
-- }
-- return 0;
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_pptp.c linux.stock/net/ipv4/netfilter/ip_conntrack_pptp.c
---- linux/net/ipv4/netfilter/ip_conntrack_pptp.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_pptp.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,531 +0,0 @@
--/*
-- * ip_conntrack_pptp.c - Version 1.11
-- *
-- * Connection tracking support for PPTP (Point to Point Tunneling Protocol).
-- * PPTP is a a protocol for creating virtual private networks.
-- * It is a specification defined by Microsoft and some vendors
-- * working with Microsoft. PPTP is built on top of a modified
-- * version of the Internet Generic Routing Encapsulation Protocol.
-- * GRE is defined in RFC 1701 and RFC 1702. Documentation of
-- * PPTP can be found in RFC 2637
-- *
-- * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>,
-- *
-- * Development of this code funded by Astaro AG (http://www.astaro.com/)
-- *
-- * Limitations:
-- * - We blindly assume that control connections are always
-- * established in PNS->PAC direction. This is a violation
-- * of RFFC2673
-- *
-- * TODO: - finish support for multiple calls within one session
-- * (needs expect reservations in newnat)
-- * - testing of incoming PPTP calls
-- */
--
--#include <linux/config.h>
--#include <linux/module.h>
--#include <linux/netfilter.h>
--#include <linux/ip.h>
--#include <net/checksum.h>
--#include <net/tcp.h>
--
--#include <linux/netfilter_ipv4/lockhelp.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
--#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
--MODULE_DESCRIPTION("Netfilter connection tracking helper module for PPTP");
--
--DECLARE_LOCK(ip_pptp_lock);
--
--#define DEBUGP(format, args...)
--
--#define SECS *HZ
--#define MINS * 60 SECS
--#define HOURS * 60 MINS
--#define DAYS * 24 HOURS
--
--#define PPTP_GRE_TIMEOUT (10 MINS)
--#define PPTP_GRE_STREAM_TIMEOUT (5 DAYS)
--
--static int pptp_expectfn(struct ip_conntrack *ct)
--{
-- struct ip_conntrack_expect *exp, *other_exp;
-- struct ip_conntrack *master;
--
-- DEBUGP("increasing timeouts\n");
-- /* increase timeout of GRE data channel conntrack entry */
-- ct->proto.gre.timeout = PPTP_GRE_TIMEOUT;
-- ct->proto.gre.stream_timeout = PPTP_GRE_STREAM_TIMEOUT;
--
-- master = master_ct(ct);
-- if (!master) {
-- DEBUGP(" no master!!!\n");
-- return 0;
-- }
--
-- DEBUGP("completing tuples with ct info\n");
-- /* we can do this, since we're unconfirmed */
-- if (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u.gre.key ==
-- htonl(master->help.ct_pptp_info.pac_call_id)) {
-- /* assume PNS->PAC */
-- ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-- htonl(master->help.ct_pptp_info.pns_call_id);
-- ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-- htonl(master->help.ct_pptp_info.pns_call_id);
-- } else {
-- /* assume PAC->PNS */
-- ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-- htonl(master->help.ct_pptp_info.pac_call_id);
-- ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-- htonl(master->help.ct_pptp_info.pns_call_id);
-- }
--
-- return 0;
--}
--
--/* timeout GRE data connections */
--static int pptp_timeout_related(struct ip_conntrack *ct)
--{
-- struct list_head *cur_item;
-- struct ip_conntrack_expect *exp;
--
-- list_for_each(cur_item, &ct->sibling_list) {
-- exp = list_entry(cur_item, struct ip_conntrack_expect,
-- expected_list);
--
-- if (!exp->sibling)
-- continue;
--
-- DEBUGP("setting timeout of conntrack %p to 0\n",
-- exp->sibling);
-- exp->sibling->proto.gre.timeout = 0;
-- exp->sibling->proto.gre.stream_timeout = 0;
-- ip_ct_refresh(exp->sibling, 0);
-- }
--
-- return 0;
--}
--
--/* expect GRE connection in PNS->PAC direction */
--static inline int
--exp_gre(struct ip_conntrack *master,
-- u_int32_t seq,
-- u_int16_t callid,
-- u_int16_t peer_callid)
--{
-- struct ip_conntrack_expect exp;
-- struct ip_conntrack_tuple inv_tuple;
--
-- memset(&exp, 0, sizeof(exp));
-- /* tuple in original direction, PAC->PNS */
-- exp.tuple.src.ip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-- exp.tuple.src.u.gre.key = htonl(ntohs(peer_callid));
-- exp.tuple.dst.ip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-- exp.tuple.dst.u.gre.key = htonl(ntohs(callid));
-- exp.tuple.dst.u.gre.protocol = __constant_htons(GRE_PROTOCOL_PPTP);
-- exp.tuple.dst.u.gre.version = GRE_VERSION_PPTP;
-- exp.tuple.dst.protonum = IPPROTO_GRE;
--
-- exp.mask.src.ip = 0xffffffff;
-- exp.mask.src.u.all = 0;
-- exp.mask.dst.u.all = 0;
-- exp.mask.dst.u.gre.key = 0xffffffff;
-- exp.mask.dst.u.gre.version = 0xff;
-- exp.mask.dst.u.gre.protocol = 0xffff;
-- exp.mask.dst.ip = 0xffffffff;
-- exp.mask.dst.protonum = 0xffff;
--
-- exp.seq = seq;
-- exp.expectfn = pptp_expectfn;
--
-- exp.help.exp_pptp_info.pac_call_id = ntohs(callid);
-- exp.help.exp_pptp_info.pns_call_id = ntohs(peer_callid);
--
-- DEBUGP("calling expect_related ");
-- DUMP_TUPLE_RAW(&exp.tuple);
--
-- /* Add GRE keymap entries */
-- ip_ct_gre_keymap_add(&exp, &exp.tuple, 0);
-- invert_tuplepr(&inv_tuple, &exp.tuple);
-- ip_ct_gre_keymap_add(&exp, &inv_tuple, 1);
--
-- ip_conntrack_expect_related(master, &exp);
--
-- return 0;
--}
--
--static inline int
--pptp_inbound_pkt(struct tcphdr *tcph,
-- struct pptp_pkt_hdr *pptph,
-- size_t datalen,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo)
--{
-- struct PptpControlHeader *ctlh;
-- union pptp_ctrl_union pptpReq;
--
-- struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-- u_int16_t msg, *cid, *pcid;
-- u_int32_t seq;
--
-- ctlh = (struct PptpControlHeader *)
-- ((char *) pptph + sizeof(struct pptp_pkt_hdr));
-- pptpReq.rawreq = (void *)
-- ((char *) ctlh + sizeof(struct PptpControlHeader));
--
-- msg = ntohs(ctlh->messageType);
-- DEBUGP("inbound control message %s\n", strMName[msg]);
--
-- switch (msg) {
-- case PPTP_START_SESSION_REPLY:
-- /* server confirms new control session */
-- if (info->sstate < PPTP_SESSION_REQUESTED) {
-- DEBUGP("%s without START_SESS_REQUEST\n",
-- strMName[msg]);
-- break;
-- }
-- if (pptpReq.srep->resultCode == PPTP_START_OK)
-- info->sstate = PPTP_SESSION_CONFIRMED;
-- else
-- info->sstate = PPTP_SESSION_ERROR;
-- break;
--
-- case PPTP_STOP_SESSION_REPLY:
-- /* server confirms end of control session */
-- if (info->sstate > PPTP_SESSION_STOPREQ) {
-- DEBUGP("%s without STOP_SESS_REQUEST\n",
-- strMName[msg]);
-- break;
-- }
-- if (pptpReq.strep->resultCode == PPTP_STOP_OK)
-- info->sstate = PPTP_SESSION_NONE;
-- else
-- info->sstate = PPTP_SESSION_ERROR;
-- break;
--
-- case PPTP_OUT_CALL_REPLY:
-- /* server accepted call, we now expect GRE frames */
-- if (info->sstate != PPTP_SESSION_CONFIRMED) {
-- DEBUGP("%s but no session\n", strMName[msg]);
-- break;
-- }
-- if (info->cstate != PPTP_CALL_OUT_REQ &&
-- info->cstate != PPTP_CALL_OUT_CONF) {
-- DEBUGP("%s without OUTCALL_REQ\n", strMName[msg]);
-- break;
-- }
-- if (pptpReq.ocack->resultCode != PPTP_OUTCALL_CONNECT) {
-- info->cstate = PPTP_CALL_NONE;
-- break;
-- }
--
-- cid = &pptpReq.ocack->callID;
-- pcid = &pptpReq.ocack->peersCallID;
--
-- info->pac_call_id = ntohs(*cid);
--
-- if (htons(info->pns_call_id) != *pcid) {
-- DEBUGP("%s for unknown callid %u\n",
-- strMName[msg], ntohs(*pcid));
-- break;
-- }
--
-- DEBUGP("%s, CID=%X, PCID=%X\n", strMName[msg],
-- ntohs(*cid), ntohs(*pcid));
--
-- info->cstate = PPTP_CALL_OUT_CONF;
--
-- seq = ntohl(tcph->seq) + ((void *)pcid - (void *)pptph);
-- exp_gre(ct, seq, *cid, *pcid);
-- break;
--
-- case PPTP_IN_CALL_REQUEST:
-- /* server tells us about incoming call request */
-- if (info->sstate != PPTP_SESSION_CONFIRMED) {
-- DEBUGP("%s but no session\n", strMName[msg]);
-- break;
-- }
-- pcid = &pptpReq.icack->peersCallID;
-- DEBUGP("%s, PCID=%X\n", strMName[msg], ntohs(*pcid));
-- info->cstate = PPTP_CALL_IN_REQ;
-- info->pac_call_id= ntohs(*pcid);
-- break;
--
-- case PPTP_IN_CALL_CONNECT:
-- /* server tells us about incoming call established */
-- if (info->sstate != PPTP_SESSION_CONFIRMED) {
-- DEBUGP("%s but no session\n", strMName[msg]);
-- break;
-- }
-- if (info->sstate != PPTP_CALL_IN_REP
-- && info->sstate != PPTP_CALL_IN_CONF) {
-- DEBUGP("%s but never sent IN_CALL_REPLY\n",
-- strMName[msg]);
-- break;
-- }
--
-- pcid = &pptpReq.iccon->peersCallID;
-- cid = &info->pac_call_id;
--
-- if (info->pns_call_id != ntohs(*pcid)) {
-- DEBUGP("%s for unknown CallID %u\n",
-- strMName[msg], ntohs(*cid));
-- break;
-- }
--
-- DEBUGP("%s, PCID=%X\n", strMName[msg], ntohs(*pcid));
-- info->cstate = PPTP_CALL_IN_CONF;
--
-- /* we expect a GRE connection from PAC to PNS */
-- seq = ntohl(tcph->seq) + ((void *)pcid - (void *)pptph);
-- exp_gre(ct, seq, *cid, *pcid);
--
-- break;
--
-- case PPTP_CALL_DISCONNECT_NOTIFY:
-- /* server confirms disconnect */
-- cid = &pptpReq.disc->callID;
-- DEBUGP("%s, CID=%X\n", strMName[msg], ntohs(*cid));
-- info->cstate = PPTP_CALL_NONE;
--
-- /* untrack this call id, unexpect GRE packets */
-- pptp_timeout_related(ct);
-- /* NEWNAT: look up exp for call id and unexpct_related */
-- break;
--
-- case PPTP_WAN_ERROR_NOTIFY:
-- break;
--
-- case PPTP_ECHO_REQUEST:
-- case PPTP_ECHO_REPLY:
-- /* I don't have to explain these ;) */
-- break;
-- default:
-- DEBUGP("invalid %s (TY=%d)\n", (msg <= PPTP_MSG_MAX)
-- ? strMName[msg]:strMName[0], msg);
-- break;
-- }
--
-- return NF_ACCEPT;
--
--}
--
--static inline int
--pptp_outbound_pkt(struct tcphdr *tcph,
-- struct pptp_pkt_hdr *pptph,
-- size_t datalen,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo)
--{
-- struct PptpControlHeader *ctlh;
-- union pptp_ctrl_union pptpReq;
-- struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
-- u_int16_t msg, *cid, *pcid;
--
-- ctlh = (struct PptpControlHeader *) ((void *) pptph + sizeof(*pptph));
-- pptpReq.rawreq = (void *) ((void *) ctlh + sizeof(*ctlh));
--
-- msg = ntohs(ctlh->messageType);
-- DEBUGP("outbound control message %s\n", strMName[msg]);
--
-- switch (msg) {
-- case PPTP_START_SESSION_REQUEST:
-- /* client requests for new control session */
-- if (info->sstate != PPTP_SESSION_NONE) {
-- DEBUGP("%s but we already have one",
-- strMName[msg]);
-- }
-- info->sstate = PPTP_SESSION_REQUESTED;
-- break;
-- case PPTP_STOP_SESSION_REQUEST:
-- /* client requests end of control session */
-- info->sstate = PPTP_SESSION_STOPREQ;
-- break;
--
-- case PPTP_OUT_CALL_REQUEST:
-- /* client initiating connection to server */
-- if (info->sstate != PPTP_SESSION_CONFIRMED) {
-- DEBUGP("%s but no session\n",
-- strMName[msg]);
-- break;
-- }
-- info->cstate = PPTP_CALL_OUT_REQ;
-- /* track PNS call id */
-- cid = &pptpReq.ocreq->callID;
-- DEBUGP("%s, CID=%X\n", strMName[msg], ntohs(*cid));
-- info->pns_call_id = ntohs(*cid);
-- break;
-- case PPTP_IN_CALL_REPLY:
-- /* client answers incoming call */
-- if (info->cstate != PPTP_CALL_IN_REQ
-- && info->cstate != PPTP_CALL_IN_REP) {
-- DEBUGP("%s without incall_req\n",
-- strMName[msg]);
-- break;
-- }
-- if (pptpReq.icack->resultCode != PPTP_INCALL_ACCEPT) {
-- info->cstate = PPTP_CALL_NONE;
-- break;
-- }
-- pcid = &pptpReq.icack->peersCallID;
-- if (info->pac_call_id != ntohs(*pcid)) {
-- DEBUGP("%s for unknown call %u\n",
-- strMName[msg], ntohs(*pcid));
-- break;
-- }
-- DEBUGP("%s, CID=%X\n", strMName[msg], ntohs(*pcid));
-- /* part two of the three-way handshake */
-- info->cstate = PPTP_CALL_IN_REP;
-- info->pns_call_id = ntohs(pptpReq.icack->callID);
-- break;
--
-- case PPTP_CALL_CLEAR_REQUEST:
-- /* client requests hangup of call */
-- if (info->sstate != PPTP_SESSION_CONFIRMED) {
-- DEBUGP("CLEAR_CALL but no session\n");
-- break;
-- }
-- /* FUTURE: iterate over all calls and check if
-- * call ID is valid. We don't do this without newnat,
-- * because we only know about last call */
-- info->cstate = PPTP_CALL_CLEAR_REQ;
-- break;
-- case PPTP_SET_LINK_INFO:
-- break;
-- case PPTP_ECHO_REQUEST:
-- case PPTP_ECHO_REPLY:
-- /* I don't have to explain these ;) */
-- break;
-- default:
-- DEBUGP("invalid %s (TY=%d)\n", (msg <= PPTP_MSG_MAX)?
-- strMName[msg]:strMName[0], msg);
-- /* unknown: no need to create GRE masq table entry */
-- break;
-- }
--
-- return NF_ACCEPT;
--}
--
--
--/* track caller id inside control connection, call expect_related */
--static int
--conntrack_pptp_help(const struct iphdr *iph, size_t len,
-- struct ip_conntrack *ct, enum ip_conntrack_info ctinfo)
--
--{
-- struct pptp_pkt_hdr *pptph;
--
-- struct tcphdr *tcph = (void *) iph + iph->ihl * 4;
-- u_int32_t tcplen = len - iph->ihl * 4;
-- u_int32_t datalen = tcplen - tcph->doff * 4;
-- void *datalimit;
-- int dir = CTINFO2DIR(ctinfo);
-- struct ip_ct_pptp_master *info = &ct->help.ct_pptp_info;
--
-- int oldsstate, oldcstate;
-- int ret;
--
-- /* don't do any tracking before tcp handshake complete */
-- if (ctinfo != IP_CT_ESTABLISHED
-- && ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY) {
-- DEBUGP("ctinfo = %u, skipping\n", ctinfo);
-- return NF_ACCEPT;
-- }
--
-- /* not a complete TCP header? */
-- if (tcplen < sizeof(struct tcphdr) || tcplen < tcph->doff * 4) {
-- DEBUGP("tcplen = %u\n", tcplen);
-- return NF_ACCEPT;
-- }
--
-- /* checksum invalid? */
-- if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
-- csum_partial((char *) tcph, tcplen, 0))) {
-- printk(KERN_NOTICE __FILE__ ": bad csum\n");
--// return NF_ACCEPT;
-- }
--
-- if (tcph->fin || tcph->rst) {
-- DEBUGP("RST/FIN received, timeouting GRE\n");
-- /* can't do this after real newnat */
-- info->cstate = PPTP_CALL_NONE;
--
-- /* untrack this call id, unexpect GRE packets */
-- pptp_timeout_related(ct);
-- /* no need to call unexpect_related since master conn
-- * dies anyway */
-- }
--
--
-- pptph = (struct pptp_pkt_hdr *) ((void *) tcph + tcph->doff * 4);
-- datalimit = (void *) pptph + datalen;
--
-- /* not a full pptp packet header? */
-- if ((void *) pptph+sizeof(*pptph) >= datalimit) {
-- DEBUGP("no full PPTP header, can't track\n");
-- return NF_ACCEPT;
-- }
--
-- /* if it's not a control message we can't do anything with it */
-- if (ntohs(pptph->packetType) != PPTP_PACKET_CONTROL ||
-- ntohl(pptph->magicCookie) != PPTP_MAGIC_COOKIE) {
-- DEBUGP("not a control packet\n");
-- return NF_ACCEPT;
-- }
--
-- oldsstate = info->sstate;
-- oldcstate = info->cstate;
--
-- LOCK_BH(&ip_pptp_lock);
--
-- if (dir == IP_CT_DIR_ORIGINAL)
-- /* client -> server (PNS -> PAC) */
-- ret = pptp_outbound_pkt(tcph, pptph, datalen, ct, ctinfo);
-- else
-- /* server -> client (PAC -> PNS) */
-- ret = pptp_inbound_pkt(tcph, pptph, datalen, ct, ctinfo);
-- DEBUGP("sstate: %d->%d, cstate: %d->%d\n",
-- oldsstate, info->sstate, oldcstate, info->cstate);
-- UNLOCK_BH(&ip_pptp_lock);
--
-- return ret;
--}
--
--/* control protocol helper */
--static struct ip_conntrack_helper pptp = {
-- { NULL, NULL },
-- "pptp", IP_CT_HELPER_F_REUSE_EXPECT, THIS_MODULE, 2, 0,
-- { { 0, { tcp: { port: __constant_htons(PPTP_CONTROL_PORT) } } },
-- { 0, { 0 }, IPPROTO_TCP } },
-- { { 0, { tcp: { port: 0xffff } } },
-- { 0, { 0 }, 0xffff } },
-- conntrack_pptp_help };
--
--/* ip_conntrack_pptp initialization */
--static int __init init(void)
--{
-- int retcode;
--
-- DEBUGP(__FILE__ ": registering helper\n");
-- if ((retcode = ip_conntrack_helper_register(&pptp))) {
-- printk(KERN_ERR "Unable to register conntrack application "
-- "helper for pptp: %d\n", retcode);
-- return -EIO;
-- }
--
-- return 0;
--}
--
--static void __exit fini(void)
--{
-- ip_conntrack_helper_unregister(&pptp);
--}
--
--module_init(init);
--module_exit(fini);
--
--EXPORT_SYMBOL(ip_pptp_lock);
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_pptp_priv.h linux.stock/net/ipv4/netfilter/ip_conntrack_pptp_priv.h
---- linux/net/ipv4/netfilter/ip_conntrack_pptp_priv.h 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_pptp_priv.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,24 +0,0 @@
--#ifndef _IP_CT_PPTP_PRIV_H
--#define _IP_CT_PPTP_PRIV_H
--
--/* PptpControlMessageType names */
--static const char *strMName[] = {
-- "UNKNOWN_MESSAGE",
-- "START_SESSION_REQUEST",
-- "START_SESSION_REPLY",
-- "STOP_SESSION_REQUEST",
-- "STOP_SESSION_REPLY",
-- "ECHO_REQUEST",
-- "ECHO_REPLY",
-- "OUT_CALL_REQUEST",
-- "OUT_CALL_REPLY",
-- "IN_CALL_REQUEST",
-- "IN_CALL_REPLY",
-- "IN_CALL_CONNECT",
-- "CALL_CLEAR_REQUEST",
-- "CALL_DISCONNECT_NOTIFY",
-- "WAN_ERROR_NOTIFY",
-- "SET_LINK_INFO"
--};
--
--#endif
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_proto_gre.c linux.stock/net/ipv4/netfilter/ip_conntrack_proto_gre.c
---- linux/net/ipv4/netfilter/ip_conntrack_proto_gre.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_proto_gre.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,320 +0,0 @@
--/*
-- * ip_conntrack_proto_gre.c - Version 1.11
-- *
-- * Connection tracking protocol helper module for GRE.
-- *
-- * GRE is a generic encapsulation protocol, which is generally not very
-- * suited for NAT, as it has no protocol-specific part as port numbers.
-- *
-- * It has an optional key field, which may help us distinguishing two
-- * connections between the same two hosts.
-- *
-- * GRE is defined in RFC 1701 and RFC 1702, as well as RFC 2784
-- *
-- * PPTP is built on top of a modified version of GRE, and has a mandatory
-- * field called "CallID", which serves us for the same purpose as the key
-- * field in plain GRE.
-- *
-- * Documentation about PPTP can be found in RFC 2637
-- *
-- * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>
-- *
-- * Development of this code funded by Astaro AG (http://www.astaro.com/)
-- *
-- */
--
--#include <linux/config.h>
--#include <linux/module.h>
--#include <linux/types.h>
--#include <linux/timer.h>
--#include <linux/netfilter.h>
--#include <linux/ip.h>
--#include <linux/in.h>
--#include <linux/list.h>
--
--#include <linux/netfilter_ipv4/lockhelp.h>
--
--DECLARE_RWLOCK(ip_ct_gre_lock);
--#define ASSERT_READ_LOCK(x) MUST_BE_READ_LOCKED(&ip_ct_gre_lock)
--#define ASSERT_WRITE_LOCK(x) MUST_BE_WRITE_LOCKED(&ip_ct_gre_lock)
--
--#include <linux/netfilter_ipv4/listhelp.h>
--#include <linux/netfilter_ipv4/ip_conntrack_protocol.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_core.h>
--
--#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
--#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
--MODULE_DESCRIPTION("netfilter connection tracking protocol helper for GRE");
--
--/* shamelessly stolen from ip_conntrack_proto_udp.c */
--#define GRE_TIMEOUT (30*HZ)
--#define GRE_STREAM_TIMEOUT (180*HZ)
--
--#define DEBUGP(x, args...)
--#define DUMP_TUPLE_GRE(x)
--
--/* GRE KEYMAP HANDLING FUNCTIONS */
--static LIST_HEAD(gre_keymap_list);
--
--static inline int gre_key_cmpfn(const struct ip_ct_gre_keymap *km,
-- const struct ip_conntrack_tuple *t)
--{
-- return ((km->tuple.src.ip == t->src.ip) &&
-- (km->tuple.dst.ip == t->dst.ip) &&
-- (km->tuple.dst.protonum == t->dst.protonum) &&
-- (km->tuple.dst.u.all == t->dst.u.all));
--}
--
--/* look up the source key for a given tuple */
--static u_int32_t gre_keymap_lookup(struct ip_conntrack_tuple *t)
--{
-- struct ip_ct_gre_keymap *km;
-- u_int32_t key;
--
-- READ_LOCK(&ip_ct_gre_lock);
-- km = LIST_FIND(&gre_keymap_list, gre_key_cmpfn,
-- struct ip_ct_gre_keymap *, t);
-- if (!km) {
-- READ_UNLOCK(&ip_ct_gre_lock);
-- return 0;
-- }
--
-- key = km->tuple.src.u.gre.key;
-- READ_UNLOCK(&ip_ct_gre_lock);
--
-- return key;
--}
--
--/* add a single keymap entry, associate with specified expect */
--int ip_ct_gre_keymap_add(struct ip_conntrack_expect *exp,
-- struct ip_conntrack_tuple *t, int reply)
--{
-- struct ip_ct_gre_keymap *km;
--
-- km = kmalloc(sizeof(*km), GFP_ATOMIC);
-- if (!km)
-- return -1;
--
-- /* initializing list head should be sufficient */
-- memset(km, 0, sizeof(*km));
--
-- memcpy(&km->tuple, t, sizeof(*t));
-- km->master = exp;
--
-- if (!reply)
-- exp->proto.gre.keymap_orig = km;
-- else
-- exp->proto.gre.keymap_reply = km;
--
-- DEBUGP("adding new entry %p: ", km);
-- DUMP_TUPLE_GRE(&km->tuple);
--
-- WRITE_LOCK(&ip_ct_gre_lock);
-- list_append(&gre_keymap_list, km);
-- WRITE_UNLOCK(&ip_ct_gre_lock);
--
-- return 0;
--}
--
--/* change the tuple of a keymap entry (used by nat helper) */
--void ip_ct_gre_keymap_change(struct ip_ct_gre_keymap *km,
-- struct ip_conntrack_tuple *t)
--{
-- DEBUGP("changing entry %p to: ", km);
-- DUMP_TUPLE_GRE(t);
--
-- WRITE_LOCK(&ip_ct_gre_lock);
-- memcpy(&km->tuple, t, sizeof(km->tuple));
-- WRITE_UNLOCK(&ip_ct_gre_lock);
--}
--
--
--/* PUBLIC CONNTRACK PROTO HELPER FUNCTIONS */
--
--/* invert gre part of tuple */
--static int gre_invert_tuple(struct ip_conntrack_tuple *tuple,
-- const struct ip_conntrack_tuple *orig)
--{
-- tuple->dst.u.gre.protocol = orig->dst.u.gre.protocol;
-- tuple->dst.u.gre.version = orig->dst.u.gre.version;
--
-- tuple->dst.u.gre.key = orig->src.u.gre.key;
-- tuple->src.u.gre.key = orig->dst.u.gre.key;
--
-- return 1;
--}
--
--/* gre hdr info to tuple */
--static int gre_pkt_to_tuple(const void *datah, size_t datalen,
-- struct ip_conntrack_tuple *tuple)
--{
-- struct gre_hdr *grehdr = (struct gre_hdr *) datah;
-- struct gre_hdr_pptp *pgrehdr = (struct gre_hdr_pptp *) datah;
-- u_int32_t srckey;
--
-- /* core guarantees 8 protocol bytes, no need for size check */
--
-- tuple->dst.u.gre.version = grehdr->version;
-- tuple->dst.u.gre.protocol = grehdr->protocol;
--
-- switch (grehdr->version) {
-- case GRE_VERSION_1701:
-- if (!grehdr->key) {
-- DEBUGP("Can't track GRE without key\n");
-- return 0;
-- }
-- tuple->dst.u.gre.key = *(gre_key(grehdr));
-- break;
--
-- case GRE_VERSION_PPTP:
-- if (ntohs(grehdr->protocol) != GRE_PROTOCOL_PPTP) {
-- DEBUGP("GRE_VERSION_PPTP but unknown proto\n");
-- return 0;
-- }
-- tuple->dst.u.gre.key = htonl(ntohs(pgrehdr->call_id));
-- break;
--
-- default:
-- printk(KERN_WARNING "unknown GRE version %hu\n",
-- tuple->dst.u.gre.version);
-- return 0;
-- }
--
-- srckey = gre_keymap_lookup(tuple);
--
-- tuple->src.u.gre.key = srckey;
--
-- return 1;
--}
--
--/* print gre part of tuple */
--static unsigned int gre_print_tuple(char *buffer,
-- const struct ip_conntrack_tuple *tuple)
--{
-- return sprintf(buffer, "version=%d protocol=0x%04x srckey=0x%x dstkey=0x%x ",
-- tuple->dst.u.gre.version,
-- ntohs(tuple->dst.u.gre.protocol),
-- ntohl(tuple->src.u.gre.key),
-- ntohl(tuple->dst.u.gre.key));
--}
--
--/* print private data for conntrack */
--static unsigned int gre_print_conntrack(char *buffer,
-- const struct ip_conntrack *ct)
--{
-- return sprintf(buffer, "timeout=%u, stream_timeout=%u ",
-- (ct->proto.gre.timeout / HZ),
-- (ct->proto.gre.stream_timeout / HZ));
--}
--
--/* Returns verdict for packet, and may modify conntrack */
--static int gre_packet(struct ip_conntrack *ct,
-- struct iphdr *iph, size_t len,
-- enum ip_conntrack_info conntrackinfo)
--{
-- /* If we've seen traffic both ways, this is a GRE connection.
-- * Extend timeout. */
-- if (ct->status & IPS_SEEN_REPLY) {
-- ip_ct_refresh(ct, ct->proto.gre.stream_timeout);
-- /* Also, more likely to be important, and not a probe. */
-- set_bit(IPS_ASSURED_BIT, &ct->status);
-- } else
-- ip_ct_refresh(ct, ct->proto.gre.timeout);
--
-- return NF_ACCEPT;
--}
--
--/* Called when a new connection for this protocol found. */
--static int gre_new(struct ip_conntrack *ct,
-- struct iphdr *iph, size_t len)
--{
-- DEBUGP(": ");
-- DUMP_TUPLE_GRE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
--
-- /* initialize to sane value. Ideally a conntrack helper
-- * (e.g. in case of pptp) is increasing them */
-- ct->proto.gre.stream_timeout = GRE_STREAM_TIMEOUT;
-- ct->proto.gre.timeout = GRE_TIMEOUT;
--
-- return 1;
--}
--
--/* Called when a conntrack entry has already been removed from the hashes
-- * and is about to be deleted from memory */
--static void gre_destroy(struct ip_conntrack *ct)
--{
-- struct ip_conntrack_expect *master = ct->master;
--
-- DEBUGP(" entering\n");
--
-- if (!master) {
-- DEBUGP("no master exp for ct %p\n", ct);
-- return;
-- }
--
-- WRITE_LOCK(&ip_ct_gre_lock);
-- if (master->proto.gre.keymap_orig) {
-- DEBUGP("removing %p from list\n", master->proto.gre.keymap_orig);
-- list_del(&master->proto.gre.keymap_orig->list);
-- kfree(master->proto.gre.keymap_orig);
-- }
-- if (master->proto.gre.keymap_reply) {
-- DEBUGP("removing %p from list\n", master->proto.gre.keymap_reply);
-- list_del(&master->proto.gre.keymap_reply->list);
-- kfree(master->proto.gre.keymap_reply);
-- }
-- WRITE_UNLOCK(&ip_ct_gre_lock);
--}
--
--/* protocol helper struct */
--static struct ip_conntrack_protocol gre = { { NULL, NULL }, IPPROTO_GRE,
-- "gre",
-- gre_pkt_to_tuple,
-- gre_invert_tuple,
-- gre_print_tuple,
-- gre_print_conntrack,
-- gre_packet,
-- gre_new,
-- gre_destroy,
-- NULL,
-- THIS_MODULE };
--
--/* ip_conntrack_proto_gre initialization */
--static int __init init(void)
--{
-- int retcode;
--
-- if ((retcode = ip_conntrack_protocol_register(&gre))) {
-- printk(KERN_ERR "Unable to register conntrack protocol "
-- "helper for gre: %d\n", retcode);
-- return -EIO;
-- }
--
-- return 0;
--}
--
--static void __exit fini(void)
--{
-- struct list_head *pos, *n;
--
-- /* delete all keymap entries */
-- WRITE_LOCK(&ip_ct_gre_lock);
-- list_for_each_safe(pos, n, &gre_keymap_list) {
-- DEBUGP("deleting keymap %p\n", pos);
-- list_del(pos);
-- kfree(pos);
-- }
-- WRITE_UNLOCK(&ip_ct_gre_lock);
--
-- ip_conntrack_protocol_unregister(&gre);
--}
--
--EXPORT_SYMBOL(ip_ct_gre_keymap_add);
--EXPORT_SYMBOL(ip_ct_gre_keymap_change);
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_proto_tcp.c linux.stock/net/ipv4/netfilter/ip_conntrack_proto_tcp.c
---- linux/net/ipv4/netfilter/ip_conntrack_proto_tcp.c 2003-08-12 07:33:45.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_proto_tcp.c 2004-05-09 04:13:03.000000000 -0400
-@@ -15,11 +15,17 @@
- #include <linux/netfilter_ipv4/ip_conntrack_protocol.h>
- #include <linux/netfilter_ipv4/lockhelp.h>
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- /* Protects conntrack->proto.tcp */
- static DECLARE_RWLOCK(tcp_lock);
-
-+/* FIXME: Examine ipfilter's timeouts and conntrack transitions more
-+ closely. They're more complex. --RR */
-
- /* Actually, I believe that neither ipmasq (where this code is stolen
- from) nor ipfilter do it exactly right. A new conntrack machine taking
-@@ -39,6 +45,25 @@
- "LISTEN"
- };
-
-+#define SECS *HZ
-+#define MINS * 60 SECS
-+#define HOURS * 60 MINS
-+#define DAYS * 24 HOURS
-+
-+
-+static unsigned long tcp_timeouts[]
-+= { 30 MINS, /* TCP_CONNTRACK_NONE, */
-+ 5 DAYS, /* TCP_CONNTRACK_ESTABLISHED, */
-+ 2 MINS, /* TCP_CONNTRACK_SYN_SENT, */
-+ 60 SECS, /* TCP_CONNTRACK_SYN_RECV, */
-+ 2 MINS, /* TCP_CONNTRACK_FIN_WAIT, */
-+ 2 MINS, /* TCP_CONNTRACK_TIME_WAIT, */
-+ 10 SECS, /* TCP_CONNTRACK_CLOSE, */
-+ 60 SECS, /* TCP_CONNTRACK_CLOSE_WAIT, */
-+ 30 SECS, /* TCP_CONNTRACK_LAST_ACK, */
-+ 2 MINS, /* TCP_CONNTRACK_LISTEN, */
-+};
-+
- #define sNO TCP_CONNTRACK_NONE
- #define sES TCP_CONNTRACK_ESTABLISHED
- #define sSS TCP_CONNTRACK_SYN_SENT
-@@ -161,13 +186,13 @@
- && tcph->syn && tcph->ack)
- conntrack->proto.tcp.handshake_ack
- = htonl(ntohl(tcph->seq) + 1);
-+ WRITE_UNLOCK(&tcp_lock);
-
- /* If only reply is a RST, we can consider ourselves not to
- have an established connection: this is a fairly common
- problem case, so we can delete the conntrack
- immediately. --RR */
- if (!(conntrack->status & IPS_SEEN_REPLY) && tcph->rst) {
-- WRITE_UNLOCK(&tcp_lock);
- if (del_timer(&conntrack->timeout))
- conntrack->timeout.function((unsigned long)conntrack);
- } else {
-@@ -178,9 +203,7 @@
- && tcph->ack_seq == conntrack->proto.tcp.handshake_ack)
- set_bit(IPS_ASSURED_BIT, &conntrack->status);
-
-- WRITE_UNLOCK(&tcp_lock);
-- ip_ct_refresh(conntrack,
-- sysctl_ip_conntrack_tcp_timeouts[newconntrack]);
-+ ip_ct_refresh(conntrack, tcp_timeouts[newconntrack]);
- }
-
- return NF_ACCEPT;
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_proto_udp.c linux.stock/net/ipv4/netfilter/ip_conntrack_proto_udp.c
---- linux/net/ipv4/netfilter/ip_conntrack_proto_udp.c 2003-08-12 07:33:45.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_proto_udp.c 2004-05-09 04:13:03.000000000 -0400
-@@ -5,7 +5,9 @@
- #include <linux/in.h>
- #include <linux/udp.h>
- #include <linux/netfilter_ipv4/ip_conntrack_protocol.h>
--#include <linux/netfilter_ipv4/ip_conntrack_udp.h>
-+
-+#define UDP_TIMEOUT (30*HZ)
-+#define UDP_STREAM_TIMEOUT (180*HZ)
-
- static int udp_pkt_to_tuple(const void *datah, size_t datalen,
- struct ip_conntrack_tuple *tuple)
-@@ -50,13 +52,11 @@
- /* If we've seen traffic both ways, this is some kind of UDP
- stream. Extend timeout. */
- if (conntrack->status & IPS_SEEN_REPLY) {
-- ip_ct_refresh(conntrack,
-- sysctl_ip_conntrack_udp_timeouts[UDP_STREAM_TIMEOUT]);
-+ ip_ct_refresh(conntrack, UDP_STREAM_TIMEOUT);
- /* Also, more likely to be important, and not a probe */
- set_bit(IPS_ASSURED_BIT, &conntrack->status);
- } else
-- ip_ct_refresh(conntrack,
-- sysctl_ip_conntrack_udp_timeouts[UDP_TIMEOUT]);
-+ ip_ct_refresh(conntrack, UDP_TIMEOUT);
-
- return NF_ACCEPT;
- }
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_standalone.c linux.stock/net/ipv4/netfilter/ip_conntrack_standalone.c
---- linux/net/ipv4/netfilter/ip_conntrack_standalone.c 2003-08-12 07:33:45.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_standalone.c 2004-05-09 04:13:03.000000000 -0400
-@@ -27,7 +27,11 @@
- #include <linux/netfilter_ipv4/ip_conntrack_helper.h>
- #include <linux/netfilter_ipv4/listhelp.h>
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- struct module *ip_conntrack_module = THIS_MODULE;
- MODULE_LICENSE("GPL");
-@@ -52,17 +56,12 @@
- return len;
- }
-
-+/* FIXME: Don't print source proto part. --RR */
- static unsigned int
- print_expect(char *buffer, const struct ip_conntrack_expect *expect)
- {
- unsigned int len;
-
-- if (!expect || !expect->expectant || !expect->expectant->helper) {
-- DEBUGP("expect %x expect->expectant %x expect->expectant->helper %x\n",
-- expect, expect->expectant, expect->expectant->helper);
-- return 0;
-- }
--
- if (expect->expectant->helper->timeout)
- len = sprintf(buffer, "EXPECTING: %lu ",
- timer_pending(&expect->timeout)
-@@ -294,6 +293,8 @@
- return ret;
- }
-
-+/* FIXME: Allow NULL functions and sub in pointers to generic for
-+ them. --RR */
- int ip_conntrack_protocol_register(struct ip_conntrack_protocol *proto)
- {
- int ret = 0;
-@@ -362,8 +363,6 @@
- EXPORT_SYMBOL(ip_ct_find_proto);
- EXPORT_SYMBOL(__ip_ct_find_proto);
- EXPORT_SYMBOL(ip_ct_find_helper);
--EXPORT_SYMBOL(sysctl_ip_conntrack_tcp_timeouts);
--EXPORT_SYMBOL(sysctl_ip_conntrack_udp_timeouts);
- EXPORT_SYMBOL(ip_conntrack_expect_related);
- EXPORT_SYMBOL(ip_conntrack_change_expect);
- EXPORT_SYMBOL(ip_conntrack_unexpect_related);
-diff -Nurb linux/net/ipv4/netfilter/ip_conntrack_tftp.c linux.stock/net/ipv4/netfilter/ip_conntrack_tftp.c
---- linux/net/ipv4/netfilter/ip_conntrack_tftp.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_conntrack_tftp.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,126 +0,0 @@
--/*
-- * Licensed under GNU GPL version 2 Copyright Magnus Boden <mb@ozaba.mine.nu>
-- * Version: 0.0.7
-- *
-- * Thu 21 Mar 2002 Harald Welte <laforge@gnumonks.org>
-- * - port to newnat API
-- *
-- */
--
--#include <linux/module.h>
--#include <linux/ip.h>
--#include <linux/udp.h>
--
--#include <linux/netfilter.h>
--#include <linux/netfilter_ipv4/ip_tables.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_tftp.h>
--
--MODULE_AUTHOR("Magnus Boden <mb@ozaba.mine.nu>");
--MODULE_DESCRIPTION("Netfilter connection tracking module for tftp");
--MODULE_LICENSE("GPL");
--
--#define MAX_PORTS 8
--static int ports[MAX_PORTS];
--static int ports_c = 0;
--#ifdef MODULE_PARM
--MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
--MODULE_PARM_DESC(ports, "port numbers of tftp servers");
--#endif
--
--#define DEBUGP(format, args...)
--
--static int tftp_help(const struct iphdr *iph, size_t len,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo)
--{
-- struct udphdr *udph = (void *)iph + iph->ihl * 4;
-- struct tftphdr *tftph = (void *)udph + 8;
-- struct ip_conntrack_expect exp;
--
-- switch (ntohs(tftph->opcode)) {
-- /* RRQ and WRQ works the same way */
-- case TFTP_OPCODE_READ:
-- case TFTP_OPCODE_WRITE:
-- DEBUGP("");
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
-- memset(&exp, 0, sizeof(exp));
--
-- exp.tuple = ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-- exp.mask.src.ip = 0xffffffff;
-- exp.mask.dst.ip = 0xffffffff;
-- exp.mask.dst.u.udp.port = 0xffff;
-- exp.mask.dst.protonum = 0xffff;
-- exp.expectfn = NULL;
--
-- DEBUGP("expect: ");
-- DUMP_TUPLE(&exp.tuple);
-- DUMP_TUPLE(&exp.mask);
-- ip_conntrack_expect_related(ct, &exp);
-- break;
-- default:
-- DEBUGP("Unknown opcode\n");
-- }
-- return NF_ACCEPT;
--}
--
--static struct ip_conntrack_helper tftp[MAX_PORTS];
--static char tftp_names[MAX_PORTS][10];
--
--static void fini(void)
--{
-- int i;
--
-- for (i = 0 ; i < ports_c; i++) {
-- DEBUGP("unregistering helper for port %d\n",
-- ports[i]);
-- ip_conntrack_helper_unregister(&tftp[i]);
-- }
--}
--
--static int __init init(void)
--{
-- int i, ret;
-- char *tmpname;
--
-- if (!ports[0])
-- ports[0]=TFTP_PORT;
--
-- for (i = 0 ; (i < MAX_PORTS) && ports[i] ; i++) {
-- /* Create helper structure */
-- memset(&tftp[i], 0, sizeof(struct ip_conntrack_helper));
--
-- tftp[i].tuple.dst.protonum = IPPROTO_UDP;
-- tftp[i].tuple.src.u.udp.port = htons(ports[i]);
-- tftp[i].mask.dst.protonum = 0xFFFF;
-- tftp[i].mask.src.u.udp.port = 0xFFFF;
-- tftp[i].max_expected = 1;
-- tftp[i].timeout = 0;
-- tftp[i].flags = IP_CT_HELPER_F_REUSE_EXPECT;
-- tftp[i].me = THIS_MODULE;
-- tftp[i].help = tftp_help;
--
-- tmpname = &tftp_names[i][0];
-- if (ports[i] == TFTP_PORT)
-- sprintf(tmpname, "tftp");
-- else
-- sprintf(tmpname, "tftp-%d", i);
-- tftp[i].name = tmpname;
--
-- DEBUGP("port #%d: %d\n", i, ports[i]);
--
-- ret=ip_conntrack_helper_register(&tftp[i]);
-- if (ret) {
-- printk("ERROR registering helper for port %d\n",
-- ports[i]);
-- fini();
-- return(ret);
-- }
-- ports_c++;
-- }
-- return(0);
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_core.c linux.stock/net/ipv4/netfilter/ip_nat_core.c
---- linux/net/ipv4/netfilter/ip_nat_core.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_core.c 2004-05-09 04:13:03.000000000 -0400
-@@ -31,7 +31,11 @@
- #include <linux/netfilter_ipv4/ip_conntrack_helper.h>
- #include <linux/netfilter_ipv4/listhelp.h>
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- DECLARE_RWLOCK(ip_nat_lock);
- DECLARE_RWLOCK_EXTERN(ip_conntrack_lock);
-@@ -207,6 +211,7 @@
- {
- struct rtable *rt;
-
-+ /* FIXME: IPTOS_TOS(iph->tos) --RR */
- if (ip_route_output(&rt, var_ip, 0, 0, 0) != 0) {
- DEBUGP("do_extra_mangle: Can't get route to %u.%u.%u.%u\n",
- NIPQUAD(var_ip));
-@@ -429,7 +434,7 @@
- *tuple = *orig_tuple;
- while ((rptr = find_best_ips_proto_fast(tuple, mr, conntrack, hooknum))
- != NULL) {
-- DEBUGP("Found best for "); DUMP_TUPLE_RAW(tuple);
-+ DEBUGP("Found best for "); DUMP_TUPLE(tuple);
- /* 3) The per-protocol part of the manip is made to
- map into the range to make a unique tuple. */
-
-@@ -529,6 +534,31 @@
- invert_tuplepr(&orig_tp,
- &conntrack->tuplehash[IP_CT_DIR_REPLY].tuple);
-
-+#if 0
-+ {
-+ unsigned int i;
-+
-+ DEBUGP("Hook %u (%s), ", hooknum,
-+ HOOK2MANIP(hooknum)==IP_NAT_MANIP_SRC ? "SRC" : "DST");
-+ DUMP_TUPLE(&orig_tp);
-+ DEBUGP("Range %p: ", mr);
-+ for (i = 0; i < mr->rangesize; i++) {
-+ DEBUGP("%u:%s%s%s %u.%u.%u.%u - %u.%u.%u.%u %u - %u\n",
-+ i,
-+ (mr->range[i].flags & IP_NAT_RANGE_MAP_IPS)
-+ ? " MAP_IPS" : "",
-+ (mr->range[i].flags
-+ & IP_NAT_RANGE_PROTO_SPECIFIED)
-+ ? " PROTO_SPECIFIED" : "",
-+ (mr->range[i].flags & IP_NAT_RANGE_FULL)
-+ ? " FULL" : "",
-+ NIPQUAD(mr->range[i].min_ip),
-+ NIPQUAD(mr->range[i].max_ip),
-+ mr->range[i].min.all,
-+ mr->range[i].max.all);
-+ }
-+ }
-+#endif
-
- do {
- if (!get_unique_tuple(&new_tuple, &orig_tp, mr, conntrack,
-@@ -538,6 +568,15 @@
- return NF_DROP;
- }
-
-+#if 0
-+ DEBUGP("Hook %u (%s) %p\n", hooknum,
-+ HOOK2MANIP(hooknum)==IP_NAT_MANIP_SRC ? "SRC" : "DST",
-+ conntrack);
-+ DEBUGP("Original: ");
-+ DUMP_TUPLE(&orig_tp);
-+ DEBUGP("New: ");
-+ DUMP_TUPLE(&new_tuple);
-+#endif
-
- /* We now have two tuples (SRCIP/SRCPT/DSTIP/DSTPT):
- the original (A/B/C/D') and the mangled one (E/F/G/H').
-@@ -554,6 +593,8 @@
- If fail this race (reply tuple now used), repeat. */
- } while (!ip_conntrack_alter_reply(conntrack, &reply));
-
-+ /* FIXME: We can simply used existing conntrack reply tuple
-+ here --RR */
- /* Create inverse of original: C/D/A/B' */
- invert_tuplepr(&inv_tuple, &orig_tp);
-
-@@ -678,6 +719,17 @@
- iph->check);
- iph->daddr = manip->ip;
- }
-+#if 0
-+ if (ip_fast_csum((u8 *)iph, iph->ihl) != 0)
-+ DEBUGP("IP: checksum on packet bad.\n");
-+
-+ if (proto == IPPROTO_TCP) {
-+ void *th = (u_int32_t *)iph + iph->ihl;
-+ if (tcp_v4_check(th, len - 4*iph->ihl, iph->saddr, iph->daddr,
-+ csum_partial((char *)th, len-4*iph->ihl, 0)))
-+ DEBUGP("TCP: checksum on packet bad\n");
-+ }
-+#endif
- }
-
- static inline int exp_for_packet(struct ip_conntrack_expect *exp,
-@@ -765,6 +817,7 @@
- continue;
-
- if (exp_for_packet(exp, pskb)) {
-+ /* FIXME: May be true multiple times in the case of UDP!! */
- DEBUGP("calling nat helper (exp=%p) for packet\n",
- exp);
- ret = helper->help(ct, exp, info, ctinfo,
-@@ -926,6 +979,7 @@
- INIT_LIST_HEAD(&byipsproto[i]);
- }
-
-+ /* FIXME: Man, this is a hack. <SIGH> */
- IP_NF_ASSERT(ip_conntrack_destroyed == NULL);
- ip_conntrack_destroyed = &ip_nat_cleanup_conntrack;
-
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_h323.c linux.stock/net/ipv4/netfilter/ip_nat_h323.c
---- linux/net/ipv4/netfilter/ip_nat_h323.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_h323.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,403 +0,0 @@
--/*
-- * H.323 'brute force' extension for NAT alteration.
-- * Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-- *
-- * Based on ip_masq_h323.c for 2.2 kernels from CoRiTel, Sofia project.
-- * (http://www.coritel.it/projects/sofia/nat.html)
-- * Uses Sampsa Ranta's excellent idea on using expectfn to 'bind'
-- * the unregistered helpers to the conntrack entries.
-- */
--
--
--#include <linux/module.h>
--#include <linux/netfilter.h>
--#include <linux/ip.h>
--#include <net/checksum.h>
--#include <net/tcp.h>
--
--#include <linux/netfilter_ipv4/lockhelp.h>
--#include <linux/netfilter_ipv4/ip_nat.h>
--#include <linux/netfilter_ipv4/ip_nat_helper.h>
--#include <linux/netfilter_ipv4/ip_nat_rule.h>
--#include <linux/netfilter_ipv4/ip_conntrack_tuple.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_h323.h>
--
--MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
--MODULE_DESCRIPTION("H.323 'brute force' connection tracking module");
--MODULE_LICENSE("GPL");
--
--DECLARE_LOCK_EXTERN(ip_h323_lock);
--struct module *ip_nat_h323 = THIS_MODULE;
--
--#define DEBUGP(format, args...)
--
--
--static unsigned int
--h225_nat_expected(struct sk_buff **pskb,
-- unsigned int hooknum,
-- struct ip_conntrack *ct,
-- struct ip_nat_info *info);
--
--static unsigned int h225_nat_help(struct ip_conntrack *ct,
-- struct ip_conntrack_expect *exp,
-- struct ip_nat_info *info,
-- enum ip_conntrack_info ctinfo,
-- unsigned int hooknum,
-- struct sk_buff **pskb);
--
--static struct ip_nat_helper h245 =
-- { { NULL, NULL },
-- "H.245", /* name */
-- 0, /* flags */
-- NULL, /* module */
-- { { 0, { 0 } }, /* tuple */
-- { 0, { 0 }, IPPROTO_TCP } },
-- { { 0, { 0xFFFF } }, /* mask */
-- { 0, { 0 }, 0xFFFF } },
-- h225_nat_help, /* helper */
-- h225_nat_expected /* expectfn */
-- };
--
--static unsigned int
--h225_nat_expected(struct sk_buff **pskb,
-- unsigned int hooknum,
-- struct ip_conntrack *ct,
-- struct ip_nat_info *info)
--{
-- struct ip_nat_multi_range mr;
-- u_int32_t newdstip, newsrcip, newip;
-- u_int16_t port;
-- struct ip_ct_h225_expect *exp_info;
-- struct ip_ct_h225_master *master_info;
-- struct ip_conntrack *master = master_ct(ct);
-- unsigned int is_h225, ret;
--
-- IP_NF_ASSERT(info);
-- IP_NF_ASSERT(master);
--
-- IP_NF_ASSERT(!(info->initialized & (1<<HOOK2MANIP(hooknum))));
--
-- DEBUGP("h225_nat_expected: We have a connection!\n");
-- master_info = &ct->master->expectant->help.ct_h225_info;
-- exp_info = &ct->master->help.exp_h225_info;
--
-- LOCK_BH(&ip_h323_lock);
--
-- DEBUGP("master: ");
-- DUMP_TUPLE(&master->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-- DUMP_TUPLE(&master->tuplehash[IP_CT_DIR_REPLY].tuple);
-- DEBUGP("conntrack: ");
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-- if (exp_info->dir == IP_CT_DIR_ORIGINAL) {
-- /* Make connection go to the client. */
-- newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-- newsrcip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-- DEBUGP("h225_nat_expected: %u.%u.%u.%u->%u.%u.%u.%u (to client)\n",
-- NIPQUAD(newsrcip), NIPQUAD(newdstip));
-- } else {
-- /* Make the connection go to the server */
-- newdstip = master->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-- newsrcip = master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- DEBUGP("h225_nat_expected: %u.%u.%u.%u->%u.%u.%u.%u (to server)\n",
-- NIPQUAD(newsrcip), NIPQUAD(newdstip));
-- }
-- port = exp_info->port;
-- is_h225 = master_info->is_h225 == H225_PORT;
-- UNLOCK_BH(&ip_h323_lock);
--
-- if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC)
-- newip = newsrcip;
-- else
-- newip = newdstip;
--
-- DEBUGP("h225_nat_expected: IP to %u.%u.%u.%u\n", NIPQUAD(newip));
--
-- mr.rangesize = 1;
-- /* We don't want to manip the per-protocol, just the IPs... */
-- mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
-- mr.range[0].min_ip = mr.range[0].max_ip = newip;
--
-- /* ... unless we're doing a MANIP_DST, in which case, make
-- sure we map to the correct port */
-- if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_DST) {
-- mr.range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED;
-- mr.range[0].min = mr.range[0].max
-- = ((union ip_conntrack_manip_proto)
-- { port });
-- }
--
-- ret = ip_nat_setup_info(ct, &mr, hooknum);
--
-- if (is_h225) {
-- DEBUGP("h225_nat_expected: H.225, setting NAT helper for %p\n", ct);
-- /* NAT expectfn called with ip_nat_lock write-locked */
-- info->helper = &h245;
-- }
-- return ret;
--}
--
--static int h323_signal_address_fixup(struct ip_conntrack *ct,
-- struct sk_buff **pskb,
-- enum ip_conntrack_info ctinfo)
--{
-- struct iphdr *iph = (*pskb)->nh.iph;
-- struct tcphdr *tcph = (void *)iph + iph->ihl*4;
-- unsigned char *data;
-- u_int32_t tcplen = (*pskb)->len - iph->ihl*4;
-- u_int32_t datalen = tcplen - tcph->doff*4;
-- struct ip_ct_h225_master *info = &ct->help.ct_h225_info;
-- u_int32_t newip;
-- u_int16_t port;
-- u_int8_t buffer[6];
-- int i;
--
-- MUST_BE_LOCKED(&ip_h323_lock);
--
-- DEBUGP("h323_signal_address_fixup: %s %s\n",
-- between(info->seq[IP_CT_DIR_ORIGINAL], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)
-- ? "yes" : "no",
-- between(info->seq[IP_CT_DIR_REPLY], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)
-- ? "yes" : "no");
-- if (!(between(info->seq[IP_CT_DIR_ORIGINAL], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)
-- || between(info->seq[IP_CT_DIR_REPLY], ntohl(tcph->seq), ntohl(tcph->seq) + datalen)))
-- return 1;
--
-- DEBUGP("h323_signal_address_fixup: offsets %u + 6 and %u + 6 in %u\n",
-- info->offset[IP_CT_DIR_ORIGINAL],
-- info->offset[IP_CT_DIR_REPLY],
-- tcplen);
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
--
-- for (i = 0; i < IP_CT_DIR_MAX; i++) {
-- DEBUGP("h323_signal_address_fixup: %s %s\n",
-- info->dir == IP_CT_DIR_ORIGINAL ? "original" : "reply",
-- i == IP_CT_DIR_ORIGINAL ? "caller" : "callee");
-- if (!between(info->seq[i], ntohl(tcph->seq),
-- ntohl(tcph->seq) + datalen))
-- continue;
-- if (!between(info->seq[i] + 6, ntohl(tcph->seq),
-- ntohl(tcph->seq) + datalen)) {
-- /* Partial retransmisison. It's a cracker being funky. */
-- if (net_ratelimit()) {
-- printk("H.323_NAT: partial packet %u/6 in %u/%u\n",
-- info->seq[i],
-- ntohl(tcph->seq),
-- ntohl(tcph->seq) + datalen);
-- }
-- return 0;
-- }
--
-- /* Change address inside packet to match way we're mapping
-- this connection. */
-- if (i == IP_CT_DIR_ORIGINAL) {
-- newip = ct->tuplehash[!info->dir].tuple.dst.ip;
-- port = ct->tuplehash[!info->dir].tuple.dst.u.tcp.port;
-- } else {
-- newip = ct->tuplehash[!info->dir].tuple.src.ip;
-- port = ct->tuplehash[!info->dir].tuple.src.u.tcp.port;
-- }
--
-- data = (char *) tcph + tcph->doff * 4 + info->offset[i];
--
-- DEBUGP("h323_signal_address_fixup: orig %s IP:port %u.%u.%u.%u:%u\n",
-- i == IP_CT_DIR_ORIGINAL ? "source" : "dest ",
-- data[0], data[1], data[2], data[3],
-- (data[4] << 8 | data[5]));
--
-- /* Modify the packet */
-- memcpy(buffer, &newip, 4);
-- memcpy(buffer + 4, &port, 2);
-- if (!ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, info->offset[i],
-- 6, buffer, 6))
-- return 0;
--
-- DEBUGP("h323_signal_address_fixup: new %s IP:port %u.%u.%u.%u:%u\n",
-- i == IP_CT_DIR_ORIGINAL ? "source" : "dest ",
-- data[0], data[1], data[2], data[3],
-- (data[4] << 8 | data[5]));
-- }
--
-- return 1;
--}
--
--static int h323_data_fixup(struct ip_ct_h225_expect *info,
-- struct ip_conntrack *ct,
-- struct sk_buff **pskb,
-- enum ip_conntrack_info ctinfo,
-- struct ip_conntrack_expect *expect)
--{
-- u_int32_t newip;
-- u_int16_t port;
-- u_int8_t buffer[6];
-- struct ip_conntrack_tuple newtuple;
-- struct iphdr *iph = (*pskb)->nh.iph;
-- struct tcphdr *tcph = (void *)iph + iph->ihl*4;
-- unsigned char *data;
-- u_int32_t tcplen = (*pskb)->len - iph->ihl*4;
-- struct ip_ct_h225_master *master_info = &ct->help.ct_h225_info;
-- int is_h225;
--
-- MUST_BE_LOCKED(&ip_h323_lock);
-- DEBUGP("h323_data_fixup: offset %u + 6 in %u\n", info->offset, tcplen);
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
--
-- if (!between(expect->seq + 6, ntohl(tcph->seq),
-- ntohl(tcph->seq) + tcplen - tcph->doff * 4)) {
-- /* Partial retransmisison. It's a cracker being funky. */
-- if (net_ratelimit()) {
-- printk("H.323_NAT: partial packet %u/6 in %u/%u\n",
-- expect->seq,
-- ntohl(tcph->seq),
-- ntohl(tcph->seq) + tcplen - tcph->doff * 4);
-- }
-- return 0;
-- }
--
-- /* Change address inside packet to match way we're mapping
-- this connection. */
-- if (info->dir == IP_CT_DIR_REPLY) {
-- /* Must be where client thinks server is */
-- newip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-- /* Expect something from client->server */
-- newtuple.src.ip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-- newtuple.dst.ip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-- } else {
-- /* Must be where server thinks client is */
-- newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- /* Expect something from server->client */
-- newtuple.src.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-- newtuple.dst.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- }
--
-- is_h225 = (master_info->is_h225 == H225_PORT);
--
-- if (is_h225) {
-- newtuple.dst.protonum = IPPROTO_TCP;
-- newtuple.src.u.tcp.port = expect->tuple.src.u.tcp.port;
-- } else {
-- newtuple.dst.protonum = IPPROTO_UDP;
-- newtuple.src.u.udp.port = expect->tuple.src.u.udp.port;
-- }
--
-- /* Try to get same port: if not, try to change it. */
-- for (port = ntohs(info->port); port != 0; port++) {
-- if (is_h225)
-- newtuple.dst.u.tcp.port = htons(port);
-- else
-- newtuple.dst.u.udp.port = htons(port);
--
-- if (ip_conntrack_change_expect(expect, &newtuple) == 0)
-- break;
-- }
-- if (port == 0) {
-- DEBUGP("h323_data_fixup: no free port found!\n");
-- return 0;
-- }
--
-- port = htons(port);
--
-- data = (char *) tcph + tcph->doff * 4 + info->offset;
--
-- DEBUGP("h323_data_fixup: orig IP:port %u.%u.%u.%u:%u\n",
-- data[0], data[1], data[2], data[3],
-- (data[4] << 8 | data[5]));
--
-- /* Modify the packet */
-- memcpy(buffer, &newip, 4);
-- memcpy(buffer + 4, &port, 2);
-- if (!ip_nat_mangle_tcp_packet(pskb, ct, ctinfo, info->offset,
-- 6, buffer, 6))
-- return 0;
--
-- DEBUGP("h323_data_fixup: new IP:port %u.%u.%u.%u:%u\n",
-- data[0], data[1], data[2], data[3],
-- (data[4] << 8 | data[5]));
--
-- return 1;
--}
--
--static unsigned int h225_nat_help(struct ip_conntrack *ct,
-- struct ip_conntrack_expect *exp,
-- struct ip_nat_info *info,
-- enum ip_conntrack_info ctinfo,
-- unsigned int hooknum,
-- struct sk_buff **pskb)
--{
-- int dir;
-- struct ip_ct_h225_expect *exp_info;
--
-- /* Only mangle things once: original direction in POST_ROUTING
-- and reply direction on PRE_ROUTING. */
-- dir = CTINFO2DIR(ctinfo);
-- DEBUGP("nat_h323: dir %s at hook %s\n",
-- dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-- hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-- : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-- : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-- if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-- || (hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY))) {
-- DEBUGP("nat_h323: Not touching dir %s at hook %s\n",
-- dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-- hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-- : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-- : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-- return NF_ACCEPT;
-- }
--
-- if (!exp) {
-- LOCK_BH(&ip_h323_lock);
-- if (!h323_signal_address_fixup(ct, pskb, ctinfo)) {
-- UNLOCK_BH(&ip_h323_lock);
-- return NF_DROP;
-- }
-- UNLOCK_BH(&ip_h323_lock);
-- return NF_ACCEPT;
-- }
--
-- exp_info = &exp->help.exp_h225_info;
--
-- LOCK_BH(&ip_h323_lock);
-- if (!h323_data_fixup(exp_info, ct, pskb, ctinfo, exp)) {
-- UNLOCK_BH(&ip_h323_lock);
-- return NF_DROP;
-- }
-- UNLOCK_BH(&ip_h323_lock);
--
-- return NF_ACCEPT;
--}
--
--static struct ip_nat_helper h225 =
-- { { NULL, NULL },
-- "H.225", /* name */
-- IP_NAT_HELPER_F_ALWAYS, /* flags */
-- THIS_MODULE, /* module */
-- { { 0, { __constant_htons(H225_PORT) } }, /* tuple */
-- { 0, { 0 }, IPPROTO_TCP } },
-- { { 0, { 0xFFFF } }, /* mask */
-- { 0, { 0 }, 0xFFFF } },
-- h225_nat_help, /* helper */
-- h225_nat_expected /* expectfn */
-- };
--
--static int __init init(void)
--{
-- int ret;
--
-- ret = ip_nat_helper_register(&h225);
--
-- if (ret != 0)
-- printk("ip_nat_h323: cannot initialize the module!\n");
--
-- return ret;
--}
--
--static void __exit fini(void)
--{
-- ip_nat_helper_unregister(&h225);
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_helper.c linux.stock/net/ipv4/netfilter/ip_nat_helper.c
---- linux/net/ipv4/netfilter/ip_nat_helper.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_helper.c 2004-05-09 04:13:03.000000000 -0400
-@@ -8,9 +8,6 @@
- * - add support for SACK adjustment
- * 14 Mar 2002 Harald Welte <laforge@gnumonks.org>:
- * - merge SACK support into newnat API
-- * 16 Aug 2002 Brian J. Murrell <netfilter@interlinx.bc.ca>:
-- * - make ip_nat_resize_packet more generic (TCP and UDP)
-- * - add ip_nat_mangle_udp_packet
- */
- #include <linux/version.h>
- #include <linux/config.h>
-@@ -25,7 +22,6 @@
- #include <net/icmp.h>
- #include <net/ip.h>
- #include <net/tcp.h>
--#include <net/udp.h>
-
- #define ASSERT_READ_LOCK(x) MUST_BE_READ_LOCKED(&ip_nat_lock)
- #define ASSERT_WRITE_LOCK(x) MUST_BE_WRITE_LOCKED(&ip_nat_lock)
-@@ -38,8 +34,13 @@
- #include <linux/netfilter_ipv4/ip_nat_helper.h>
- #include <linux/netfilter_ipv4/listhelp.h>
-
-+#if 0
-+#define DEBUGP printk
-+#define DUMP_OFFSET(x) printk("offset_before=%d, offset_after=%d, correction_pos=%u\n", x->offset_before, x->offset_after, x->correction_pos);
-+#else
- #define DEBUGP(format, args...)
- #define DUMP_OFFSET(x)
-+#endif
-
- DECLARE_LOCK(ip_nat_seqofs_lock);
-
-@@ -50,12 +51,18 @@
- int new_size)
- {
- struct iphdr *iph;
-+ struct tcphdr *tcph;
-+ void *data;
- int dir;
- struct ip_nat_seq *this_way, *other_way;
-
- DEBUGP("ip_nat_resize_packet: old_size = %u, new_size = %u\n",
- (*skb)->len, new_size);
-
-+ iph = (*skb)->nh.iph;
-+ tcph = (void *)iph + iph->ihl*4;
-+ data = (void *)tcph + tcph->doff*4;
-+
- dir = CTINFO2DIR(ctinfo);
-
- this_way = &ct->nat.info.seq[dir];
-@@ -77,9 +84,8 @@
- }
-
- iph = (*skb)->nh.iph;
-- if (iph->protocol == IPPROTO_TCP) {
-- struct tcphdr *tcph = (void *)iph + iph->ihl*4;
-- void *data = (void *)tcph + tcph->doff*4;
-+ tcph = (void *)iph + iph->ihl*4;
-+ data = (void *)tcph + tcph->doff*4;
-
- DEBUGP("ip_nat_resize_packet: Seq_offset before: ");
- DUMP_OFFSET(this_way);
-@@ -95,20 +101,25 @@
- this_way->correction_pos = ntohl(tcph->seq);
- this_way->offset_before = this_way->offset_after;
- this_way->offset_after = (int32_t)
-- this_way->offset_before + new_size -
-- (*skb)->len;
-+ this_way->offset_before + new_size - (*skb)->len;
- }
-
- UNLOCK_BH(&ip_nat_seqofs_lock);
-
- DEBUGP("ip_nat_resize_packet: Seq_offset after: ");
- DUMP_OFFSET(this_way);
-- }
-
- return 1;
- }
-
-
-+/* Generic function for mangling variable-length address changes inside
-+ * NATed connections (like the PORT XXX,XXX,XXX,XXX,XXX,XXX command in FTP).
-+ *
-+ * Takes care about all the nasty sequence number changes, checksumming,
-+ * skb enlargement, ...
-+ *
-+ * */
- int
- ip_nat_mangle_tcp_packet(struct sk_buff **skb,
- struct ip_conntrack *ct,
-@@ -163,7 +174,6 @@
- tcph = (void *)iph + iph->ihl*4;
- data = (void *)tcph + tcph->doff*4;
-
-- if (rep_len != match_len)
- /* move post-replacement */
- memmove(data + match_offset + rep_len,
- data + match_offset + match_len,
-@@ -198,104 +208,6 @@
- return 1;
- }
-
--int
--ip_nat_mangle_udp_packet(struct sk_buff **skb,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo,
-- unsigned int match_offset,
-- unsigned int match_len,
-- char *rep_buffer,
-- unsigned int rep_len)
--{
-- struct iphdr *iph = (*skb)->nh.iph;
-- struct udphdr *udph = (void *)iph + iph->ihl * 4;
-- unsigned char *data;
-- u_int32_t udplen, newlen, newudplen;
--
-- udplen = (*skb)->len - iph->ihl*4;
-- newudplen = udplen - match_len + rep_len;
-- newlen = iph->ihl*4 + newudplen;
--
-- if (newlen > 65535) {
-- if (net_ratelimit())
-- printk("ip_nat_mangle_udp_packet: nat'ed packet "
-- "exceeds maximum packet size\n");
-- return 0;
-- }
--
-- if ((*skb)->len != newlen) {
-- if (!ip_nat_resize_packet(skb, ct, ctinfo, newlen)) {
-- printk("resize_packet failed!!\n");
-- return 0;
-- }
-- }
--
-- /* Alexey says: if a hook changes _data_ ... it can break
-- original packet sitting in tcp queue and this is fatal */
-- if (skb_cloned(*skb)) {
-- struct sk_buff *nskb = skb_copy(*skb, GFP_ATOMIC);
-- if (!nskb) {
-- if (net_ratelimit())
-- printk("Out of memory cloning TCP packet\n");
-- return 0;
-- }
-- /* Rest of kernel will get very unhappy if we pass it
-- a suddenly-orphaned skbuff */
-- if ((*skb)->sk)
-- skb_set_owner_w(nskb, (*skb)->sk);
-- kfree_skb(*skb);
-- *skb = nskb;
-- }
--
-- /* skb may be copied !! */
-- iph = (*skb)->nh.iph;
-- udph = (void *)iph + iph->ihl*4;
-- data = (void *)udph + sizeof(struct udphdr);
--
-- if (rep_len != match_len)
-- /* move post-replacement */
-- memmove(data + match_offset + rep_len,
-- data + match_offset + match_len,
-- (*skb)->tail - (data + match_offset + match_len));
--
-- /* insert data from buffer */
-- memcpy(data + match_offset, rep_buffer, rep_len);
--
-- /* update skb info */
-- if (newlen > (*skb)->len) {
-- DEBUGP("ip_nat_mangle_udp_packet: Extending packet by "
-- "%u to %u bytes\n", newlen - (*skb)->len, newlen);
-- skb_put(*skb, newlen - (*skb)->len);
-- } else {
-- DEBUGP("ip_nat_mangle_udp_packet: Shrinking packet from "
-- "%u to %u bytes\n", (*skb)->len, newlen);
-- skb_trim(*skb, newlen);
-- }
--
-- /* update the length of the UDP and IP packets to the new values*/
-- udph->len = htons((*skb)->len - iph->ihl*4);
-- iph->tot_len = htons(newlen);
--
-- /* fix udp checksum if udp checksum was previously calculated */
-- if ((*skb)->csum != 0) {
-- (*skb)->csum = csum_partial((char *)udph +
-- sizeof(struct udphdr),
-- newudplen - sizeof(struct udphdr),
-- 0);
--
-- udph->check = 0;
-- udph->check = csum_tcpudp_magic(iph->saddr, iph->daddr,
-- newudplen, IPPROTO_UDP,
-- csum_partial((char *)udph,
-- sizeof(struct udphdr),
-- (*skb)->csum));
-- }
--
-- ip_send_check(iph);
--
-- return 1;
--}
--
- /* Adjust one found SACK option including checksum correction */
- static void
- sack_adjust(struct tcphdr *tcph,
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_mms.c linux.stock/net/ipv4/netfilter/ip_nat_mms.c
---- linux/net/ipv4/netfilter/ip_nat_mms.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_mms.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,330 +0,0 @@
--/* MMS extension for TCP NAT alteration.
-- * (C) 2002 by Filip Sneppe <filip.sneppe@cronos.be>
-- * based on ip_nat_ftp.c and ip_nat_irc.c
-- *
-- * ip_nat_mms.c v0.3 2002-09-22
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License
-- * as published by the Free Software Foundation; either version
-- * 2 of the License, or (at your option) any later version.
-- *
-- * Module load syntax:
-- * insmod ip_nat_mms.o ports=port1,port2,...port<MAX_PORTS>
-- *
-- * Please give the ports of all MMS servers You wish to connect to.
-- * If you don't specify ports, the default will be TCP port 1755.
-- *
-- * More info on MMS protocol, firewalls and NAT:
-- * http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnwmt/html/MMSFirewall.asp
-- * http://www.microsoft.com/windows/windowsmedia/serve/firewall.asp
-- *
-- * The SDP project people are reverse-engineering MMS:
-- * http://get.to/sdp
-- */
--
--
--#include <linux/module.h>
--#include <linux/netfilter_ipv4.h>
--#include <linux/ip.h>
--#include <linux/tcp.h>
--#include <net/tcp.h>
--#include <linux/netfilter_ipv4/ip_nat.h>
--#include <linux/netfilter_ipv4/ip_nat_helper.h>
--#include <linux/netfilter_ipv4/ip_nat_rule.h>
--#include <linux/netfilter_ipv4/ip_conntrack_mms.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--
--#define DEBUGP(format, args...)
--#define DUMP_BYTES(address, counter)
--
--#define MAX_PORTS 8
--static int ports[MAX_PORTS];
--static int ports_c = 0;
--
--#ifdef MODULE_PARM
--MODULE_PARM(ports, "1-" __MODULE_STRING(MAX_PORTS) "i");
--#endif
--
--MODULE_AUTHOR("Filip Sneppe <filip.sneppe@cronos.be>");
--MODULE_DESCRIPTION("Microsoft Windows Media Services (MMS) NAT module");
--MODULE_LICENSE("GPL");
--
--DECLARE_LOCK_EXTERN(ip_mms_lock);
--
--
--static int mms_data_fixup(const struct ip_ct_mms_expect *ct_mms_info,
-- struct ip_conntrack *ct,
-- struct sk_buff **pskb,
-- enum ip_conntrack_info ctinfo,
-- struct ip_conntrack_expect *expect)
--{
-- u_int32_t newip;
-- struct ip_conntrack_tuple t;
-- struct iphdr *iph = (*pskb)->nh.iph;
-- struct tcphdr *tcph = (void *) iph + iph->ihl * 4;
-- char *data = (char *)tcph + tcph->doff * 4;
-- int i, j, k, port;
-- u_int16_t mms_proto;
--
-- u_int32_t *mms_chunkLenLV = (u_int32_t *)(data + MMS_SRV_CHUNKLENLV_OFFSET);
-- u_int32_t *mms_chunkLenLM = (u_int32_t *)(data + MMS_SRV_CHUNKLENLM_OFFSET);
-- u_int32_t *mms_messageLength = (u_int32_t *)(data + MMS_SRV_MESSAGELENGTH_OFFSET);
--
-- int zero_padding;
--
-- char buffer[28]; /* "\\255.255.255.255\UDP\65635" * 2 (for unicode) */
-- char unicode_buffer[75]; /* 27*2 (unicode) + 20 + 1 */
-- char proto_string[6];
--
-- MUST_BE_LOCKED(&ip_mms_lock);
--
-- /* what was the protocol again ? */
-- mms_proto = expect->tuple.dst.protonum;
-- sprintf(proto_string, "%u", mms_proto);
--
-- DEBUGP("ip_nat_mms: mms_data_fixup: info (seq %u + %u) in %u, proto %s\n",
-- expect->seq, ct_mms_info->len, ntohl(tcph->seq),
-- mms_proto == IPPROTO_UDP ? "UDP"
-- : mms_proto == IPPROTO_TCP ? "TCP":proto_string);
--
-- newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
--
-- /* Alter conntrack's expectations. */
-- t = expect->tuple;
-- t.dst.ip = newip;
-- for (port = ct_mms_info->port; port != 0; port++) {
-- t.dst.u.tcp.port = htons(port);
-- if (ip_conntrack_change_expect(expect, &t) == 0) {
-- DEBUGP("ip_nat_mms: mms_data_fixup: using port %d\n", port);
-- break;
-- }
-- }
--
-- if(port == 0)
-- return 0;
--
-- sprintf(buffer, "\\\\%u.%u.%u.%u\\%s\\%u",
-- NIPQUAD(newip),
-- expect->tuple.dst.protonum == IPPROTO_UDP ? "UDP"
-- : expect->tuple.dst.protonum == IPPROTO_TCP ? "TCP":proto_string,
-- port);
-- DEBUGP("ip_nat_mms: new unicode string=%s\n", buffer);
--
-- memset(unicode_buffer, 0, sizeof(char)*75);
--
-- for (i=0; i<strlen(buffer); ++i)
-- *(unicode_buffer+i*2)=*(buffer+i);
--
-- DEBUGP("ip_nat_mms: mms_data_fixup: padding: %u len: %u\n", ct_mms_info->padding, ct_mms_info->len);
-- DEBUGP("ip_nat_mms: mms_data_fixup: offset: %u\n", MMS_SRV_UNICODE_STRING_OFFSET+ct_mms_info->len);
-- DUMP_BYTES(data+MMS_SRV_UNICODE_STRING_OFFSET, 60);
--
-- /* add end of packet to it */
-- for (j=0; j<ct_mms_info->padding; ++j) {
-- DEBUGP("ip_nat_mms: mms_data_fixup: i=%u j=%u byte=%u\n",
-- i, j, (u8)*(data+MMS_SRV_UNICODE_STRING_OFFSET+ct_mms_info->len+j));
-- *(unicode_buffer+i*2+j) = *(data+MMS_SRV_UNICODE_STRING_OFFSET+ct_mms_info->len+j);
-- }
--
-- /* pad with zeroes at the end ? see explanation of weird math below */
-- zero_padding = (8-(strlen(buffer)*2 + ct_mms_info->padding + 4)%8)%8;
-- for (k=0; k<zero_padding; ++k)
-- *(unicode_buffer+i*2+j+k)= (char)0;
--
-- DEBUGP("ip_nat_mms: mms_data_fixup: zero_padding = %u\n", zero_padding);
-- DEBUGP("ip_nat_mms: original=> chunkLenLV=%u chunkLenLM=%u messageLength=%u\n",
-- *mms_chunkLenLV, *mms_chunkLenLM, *mms_messageLength);
--
-- /* explanation, before I forget what I did:
-- strlen(buffer)*2 + ct_mms_info->padding + 4 must be divisable by 8;
-- divide by 8 and add 3 to compute the mms_chunkLenLM field,
-- but note that things may have to be padded with zeroes to align by 8
-- bytes, hence we add 7 and divide by 8 to get the correct length */
-- *mms_chunkLenLM = (u_int32_t) (3+(strlen(buffer)*2+ct_mms_info->padding+11)/8);
-- *mms_chunkLenLV = *mms_chunkLenLM+2;
-- *mms_messageLength = *mms_chunkLenLV*8;
--
-- DEBUGP("ip_nat_mms: modified=> chunkLenLV=%u chunkLenLM=%u messageLength=%u\n",
-- *mms_chunkLenLV, *mms_chunkLenLM, *mms_messageLength);
--
-- ip_nat_mangle_tcp_packet(pskb, ct, ctinfo,
-- expect->seq - ntohl(tcph->seq),
-- ct_mms_info->len + ct_mms_info->padding, unicode_buffer,
-- strlen(buffer)*2 + ct_mms_info->padding + zero_padding);
-- DUMP_BYTES(unicode_buffer, 60);
--
-- return 1;
--}
--
--static unsigned int
--mms_nat_expected(struct sk_buff **pskb,
-- unsigned int hooknum,
-- struct ip_conntrack *ct,
-- struct ip_nat_info *info)
--{
-- struct ip_nat_multi_range mr;
-- u_int32_t newdstip, newsrcip, newip;
--
-- struct ip_conntrack *master = master_ct(ct);
--
-- IP_NF_ASSERT(info);
-- IP_NF_ASSERT(master);
--
-- IP_NF_ASSERT(!(info->initialized & (1 << HOOK2MANIP(hooknum))));
--
-- DEBUGP("ip_nat_mms: mms_nat_expected: We have a connection!\n");
--
-- newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-- newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.ip;
-- DEBUGP("ip_nat_mms: mms_nat_expected: hook %s: newsrc->newdst %u.%u.%u.%u->%u.%u.%u.%u\n",
-- hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-- : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-- : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???",
-- NIPQUAD(newsrcip), NIPQUAD(newdstip));
--
-- if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC)
-- newip = newsrcip;
-- else
-- newip = newdstip;
--
-- DEBUGP("ip_nat_mms: mms_nat_expected: IP to %u.%u.%u.%u\n", NIPQUAD(newip));
--
-- mr.rangesize = 1;
-- /* We don't want to manip the per-protocol, just the IPs. */
-- mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
-- mr.range[0].min_ip = mr.range[0].max_ip = newip;
--
-- return ip_nat_setup_info(ct, &mr, hooknum);
--}
--
--
--static unsigned int mms_nat_help(struct ip_conntrack *ct,
-- struct ip_conntrack_expect *exp,
-- struct ip_nat_info *info,
-- enum ip_conntrack_info ctinfo,
-- unsigned int hooknum,
-- struct sk_buff **pskb)
--{
-- struct iphdr *iph = (*pskb)->nh.iph;
-- struct tcphdr *tcph = (void *) iph + iph->ihl * 4;
-- unsigned int datalen;
-- int dir;
-- struct ip_ct_mms_expect *ct_mms_info;
--
-- if (!exp)
-- DEBUGP("ip_nat_mms: no exp!!");
--
-- ct_mms_info = &exp->help.exp_mms_info;
--
-- /* Only mangle things once: original direction in POST_ROUTING
-- and reply direction on PRE_ROUTING. */
-- dir = CTINFO2DIR(ctinfo);
-- if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-- ||(hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY))) {
-- DEBUGP("ip_nat_mms: mms_nat_help: not touching dir %s at hook %s\n",
-- dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-- hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-- : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-- : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-- return NF_ACCEPT;
-- }
-- DEBUGP("ip_nat_mms: mms_nat_help: beyond not touching (dir %s at hook %s)\n",
-- dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-- hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-- : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-- : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
--
-- datalen = (*pskb)->len - iph->ihl * 4 - tcph->doff * 4;
--
-- DEBUGP("ip_nat_mms: mms_nat_help: %u+%u=%u %u %u\n", exp->seq, ct_mms_info->len,
-- exp->seq + ct_mms_info->len,
-- ntohl(tcph->seq),
-- ntohl(tcph->seq) + datalen);
--
-- LOCK_BH(&ip_mms_lock);
-- /* Check wether the whole IP/proto/port pattern is carried in the payload */
-- if (between(exp->seq + ct_mms_info->len,
-- ntohl(tcph->seq),
-- ntohl(tcph->seq) + datalen)) {
-- if (!mms_data_fixup(ct_mms_info, ct, pskb, ctinfo, exp)) {
-- UNLOCK_BH(&ip_mms_lock);
-- return NF_DROP;
-- }
-- } else {
-- /* Half a match? This means a partial retransmisison.
-- It's a cracker being funky. */
-- if (net_ratelimit()) {
-- printk("ip_nat_mms: partial packet %u/%u in %u/%u\n",
-- exp->seq, ct_mms_info->len,
-- ntohl(tcph->seq),
-- ntohl(tcph->seq) + datalen);
-- }
-- UNLOCK_BH(&ip_mms_lock);
-- return NF_DROP;
-- }
-- UNLOCK_BH(&ip_mms_lock);
--
-- return NF_ACCEPT;
--}
--
--static struct ip_nat_helper mms[MAX_PORTS];
--static char mms_names[MAX_PORTS][10];
--
--/* Not __exit: called from init() */
--static void fini(void)
--{
-- int i;
--
-- for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
-- DEBUGP("ip_nat_mms: unregistering helper for port %d\n", ports[i]);
-- ip_nat_helper_unregister(&mms[i]);
-- }
--}
--
--static int __init init(void)
--{
-- int i, ret = 0;
-- char *tmpname;
--
-- if (ports[0] == 0)
-- ports[0] = MMS_PORT;
--
-- for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
--
-- memset(&mms[i], 0, sizeof(struct ip_nat_helper));
--
-- mms[i].tuple.dst.protonum = IPPROTO_TCP;
-- mms[i].tuple.src.u.tcp.port = htons(ports[i]);
-- mms[i].mask.dst.protonum = 0xFFFF;
-- mms[i].mask.src.u.tcp.port = 0xFFFF;
-- mms[i].help = mms_nat_help;
-- mms[i].me = THIS_MODULE;
-- mms[i].flags = 0;
-- mms[i].expect = mms_nat_expected;
--
-- tmpname = &mms_names[i][0];
-- if (ports[i] == MMS_PORT)
-- sprintf(tmpname, "mms");
-- else
-- sprintf(tmpname, "mms-%d", i);
-- mms[i].name = tmpname;
--
-- DEBUGP("ip_nat_mms: register helper for port %d\n",
-- ports[i]);
-- ret = ip_nat_helper_register(&mms[i]);
--
-- if (ret) {
-- printk("ip_nat_mms: error registering "
-- "helper for port %d\n", ports[i]);
-- fini();
-- return ret;
-- }
-- ports_c++;
-- }
--
-- return ret;
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_pptp.c linux.stock/net/ipv4/netfilter/ip_nat_pptp.c
---- linux/net/ipv4/netfilter/ip_nat_pptp.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_pptp.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,412 +0,0 @@
--/*
-- * ip_nat_pptp.c - Version 1.11
-- *
-- * NAT support for PPTP (Point to Point Tunneling Protocol).
-- * PPTP is a a protocol for creating virtual private networks.
-- * It is a specification defined by Microsoft and some vendors
-- * working with Microsoft. PPTP is built on top of a modified
-- * version of the Internet Generic Routing Encapsulation Protocol.
-- * GRE is defined in RFC 1701 and RFC 1702. Documentation of
-- * PPTP can be found in RFC 2637
-- *
-- * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>
-- *
-- * Development of this code funded by Astaro AG (http://www.astaro.com/)
-- *
-- * TODO: - Support for multiple calls within one session
-- * (needs netfilter newnat code)
-- * - NAT to a unique tuple, not to TCP source port
-- * (needs netfilter tuple reservation)
-- * - Support other NAT scenarios than SNAT of PNS
-- *
-- */
--
--#include <linux/config.h>
--#include <linux/module.h>
--#include <linux/ip.h>
--#include <linux/tcp.h>
--#include <net/tcp.h>
--#include <linux/netfilter_ipv4/ip_nat.h>
--#include <linux/netfilter_ipv4/ip_nat_rule.h>
--#include <linux/netfilter_ipv4/ip_nat_helper.h>
--#include <linux/netfilter_ipv4/ip_nat_pptp.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
--#include <linux/netfilter_ipv4/ip_conntrack_pptp.h>
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
--MODULE_DESCRIPTION("Netfilter NAT helper module for PPTP");
--
--
--#define DEBUGP(format, args...)
--
--static unsigned int
--pptp_nat_expected(struct sk_buff **pskb,
-- unsigned int hooknum,
-- struct ip_conntrack *ct,
-- struct ip_nat_info *info)
--{
-- struct ip_conntrack *master = master_ct(ct);
-- struct ip_nat_multi_range mr;
-- struct ip_ct_pptp_master *ct_pptp_info;
-- struct ip_nat_pptp *nat_pptp_info;
-- u_int32_t newsrcip, newdstip, newcid;
-- int ret;
--
-- IP_NF_ASSERT(info);
-- IP_NF_ASSERT(master);
-- IP_NF_ASSERT(!(info->initialized & (1 << HOOK2MANIP(hooknum))));
--
-- DEBUGP("we have a connection!\n");
--
-- LOCK_BH(&ip_pptp_lock);
-- ct_pptp_info = &master->help.ct_pptp_info;
-- nat_pptp_info = &master->nat.help.nat_pptp_info;
--
-- /* need to alter GRE tuple because conntrack expectfn() used 'wrong'
-- * (unmanipulated) values */
-- if (hooknum == NF_IP_PRE_ROUTING) {
-- DEBUGP("completing tuples with NAT info \n");
-- /* we can do this, since we're unconfirmed */
-- if (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u.gre.key ==
-- htonl(ct_pptp_info->pac_call_id)) {
-- /* assume PNS->PAC */
-- ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-- htonl(nat_pptp_info->pns_call_id);
--// ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u.gre.key =
--// htonl(nat_pptp_info->pac_call_id);
-- ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-- htonl(nat_pptp_info->pns_call_id);
-- } else {
-- /* assume PAC->PNS */
-- DEBUGP("WRONG DIRECTION\n");
-- ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.gre.key =
-- htonl(nat_pptp_info->pac_call_id);
-- ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u.gre.key =
-- htonl(nat_pptp_info->pns_call_id);
-- }
-- }
--
-- if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_DST) {
-- newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip;
-- newcid = htonl(master->nat.help.nat_pptp_info.pac_call_id);
--
-- mr.rangesize = 1;
-- mr.range[0].flags = IP_NAT_RANGE_MAP_IPS | IP_NAT_RANGE_PROTO_SPECIFIED;
-- mr.range[0].min_ip = mr.range[0].max_ip = newdstip;
-- mr.range[0].min = mr.range[0].max =
-- ((union ip_conntrack_manip_proto ) { newcid });
-- DEBUGP("change dest ip to %u.%u.%u.%u\n",
-- NIPQUAD(newdstip));
-- DEBUGP("change dest key to 0x%x\n", ntohl(newcid));
-- ret = ip_nat_setup_info(ct, &mr, hooknum);
-- } else {
-- newsrcip = master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- /* nat_multi_range is in network byte order, and GRE tuple
-- * is 32 bits, not 16 like callID */
-- newcid = htonl(master->help.ct_pptp_info.pns_call_id);
--
-- mr.rangesize = 1;
-- mr.range[0].flags = IP_NAT_RANGE_MAP_IPS
-- |IP_NAT_RANGE_PROTO_SPECIFIED;
-- mr.range[0].min_ip = mr.range[0].max_ip = newsrcip;
-- mr.range[0].min = mr.range[0].max =
-- ((union ip_conntrack_manip_proto ) { newcid });
-- DEBUGP("change src ip to %u.%u.%u.%u\n",
-- NIPQUAD(newsrcip));
-- DEBUGP("change 'src' key to 0x%x\n", ntohl(newcid));
-- ret = ip_nat_setup_info(ct, &mr, hooknum);
-- }
--
-- UNLOCK_BH(&ip_pptp_lock);
--
-- return ret;
--
--}
--
--/* outbound packets == from PNS to PAC */
--static inline unsigned int
--pptp_outbound_pkt(struct tcphdr *tcph, struct pptp_pkt_hdr *pptph,
-- size_t datalen,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo,
-- struct ip_conntrack_expect *exp)
--
--{
-- struct PptpControlHeader *ctlh;
-- union pptp_ctrl_union pptpReq;
-- struct ip_ct_pptp_master *ct_pptp_info = &ct->help.ct_pptp_info;
-- struct ip_nat_pptp *nat_pptp_info = &ct->nat.help.nat_pptp_info;
--
-- u_int16_t msg, *cid = NULL, new_callid;
--
-- ctlh = (struct PptpControlHeader *) ((void *) pptph + sizeof(*pptph));
-- pptpReq.rawreq = (void *) ((void *) ctlh + sizeof(*ctlh));
--
-- new_callid = htons(ct_pptp_info->pns_call_id);
--
-- switch (msg = ntohs(ctlh->messageType)) {
-- case PPTP_OUT_CALL_REQUEST:
-- cid = &pptpReq.ocreq->callID;
--
-- /* save original call ID in nat_info */
-- nat_pptp_info->pns_call_id = ct_pptp_info->pns_call_id;
--
-- new_callid = tcph->source;
-- /* save new call ID in ct info */
-- ct_pptp_info->pns_call_id = ntohs(new_callid);
-- break;
-- case PPTP_IN_CALL_REPLY:
-- cid = &pptpReq.icreq->callID;
-- break;
-- case PPTP_CALL_CLEAR_REQUEST:
-- cid = &pptpReq.clrreq->callID;
-- break;
-- case PPTP_CALL_DISCONNECT_NOTIFY:
-- cid = &pptpReq.disc->callID;
-- break;
--
-- default:
-- DEBUGP("unknown outbound packet 0x%04x:%s\n", msg,
-- (msg <= PPTP_MSG_MAX)? strMName[msg]:strMName[0]);
-- /* fall through */
--
-- case PPTP_SET_LINK_INFO:
-- /* only need to NAT in case PAC is behind NAT box */
-- case PPTP_START_SESSION_REQUEST:
-- case PPTP_START_SESSION_REPLY:
-- case PPTP_STOP_SESSION_REQUEST:
-- case PPTP_STOP_SESSION_REPLY:
-- case PPTP_ECHO_REQUEST:
-- case PPTP_ECHO_REPLY:
-- /* no need to alter packet */
-- return NF_ACCEPT;
-- }
--
-- IP_NF_ASSERT(cid);
--
-- DEBUGP("altering call id from 0x%04x to 0x%04x\n",
-- ntohs(*cid), ntohs(new_callid));
-- /* mangle packet */
-- tcph->check = ip_nat_cheat_check(*cid^0xFFFF,
-- new_callid, tcph->check);
-- *cid = new_callid;
--
-- return NF_ACCEPT;
--}
--
--/* inbound packets == from PAC to PNS */
--static inline unsigned int
--pptp_inbound_pkt(struct tcphdr *tcph, struct pptp_pkt_hdr *pptph,
-- size_t datalen,
-- struct ip_conntrack *ct,
-- enum ip_conntrack_info ctinfo,
-- struct ip_conntrack_expect *oldexp)
--{
-- struct PptpControlHeader *ctlh;
-- union pptp_ctrl_union pptpReq;
-- struct ip_ct_pptp_master *ct_pptp_info = &ct->help.ct_pptp_info;
-- struct ip_nat_pptp *nat_pptp_info = &ct->nat.help.nat_pptp_info;
--
-- u_int16_t msg, new_cid = 0, new_pcid, *pcid = NULL, *cid = NULL;
-- u_int32_t old_dst_ip;
--
-- struct ip_conntrack_tuple t;
--
-- ctlh = (struct PptpControlHeader *) ((void *) pptph + sizeof(*pptph));
-- pptpReq.rawreq = (void *) ((void *) ctlh + sizeof(*ctlh));
--
-- new_pcid = htons(nat_pptp_info->pns_call_id);
--
-- switch (msg = ntohs(ctlh->messageType)) {
-- case PPTP_OUT_CALL_REPLY:
-- pcid = &pptpReq.ocack->peersCallID;
-- cid = &pptpReq.ocack->callID;
-- if (!oldexp) {
-- DEBUGP("outcall but no expectation\n");
-- break;
-- }
-- old_dst_ip = oldexp->tuple.dst.ip;
-- t = oldexp->tuple;
--
-- /* save original PAC call ID in nat_info */
-- nat_pptp_info->pac_call_id = ct_pptp_info->pac_call_id;
--
-- /* store new callID in ct_info, so conntrack works */
-- //ct_pptp_info->pac_call_id = ntohs(tcph->source);
-- //new_cid = htons(ct_pptp_info->pac_call_id);
--
-- /* alter expectation */
-- if (t.dst.ip == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip) {
-- /* expectation for PNS->PAC direction */
-- t.dst.u.gre.key = htonl(ct_pptp_info->pac_call_id);
-- t.src.u.gre.key = htonl(nat_pptp_info->pns_call_id);
-- } else {
-- /* expectation for PAC->PNS direction */
-- t.dst.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- DEBUGP("EXPECTATION IN WRONG DIRECTION!!!\n");
-- }
--
-- if (!ip_conntrack_change_expect(oldexp, &t)) {
-- DEBUGP("successfully changed expect\n");
-- } else {
-- DEBUGP("can't change expect\n");
-- }
-- ip_ct_gre_keymap_change(oldexp->proto.gre.keymap_orig, &t);
-- /* reply keymap */
-- t.src.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.ip;
-- t.dst.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- t.src.u.gre.key = htonl(nat_pptp_info->pac_call_id);
-- t.dst.u.gre.key = htonl(ct_pptp_info->pns_call_id);
-- ip_ct_gre_keymap_change(oldexp->proto.gre.keymap_reply, &t);
--
-- break;
-- case PPTP_IN_CALL_CONNECT:
-- pcid = &pptpReq.iccon->peersCallID;
-- if (!oldexp)
-- break;
-- old_dst_ip = oldexp->tuple.dst.ip;
-- t = oldexp->tuple;
--
-- /* alter expectation, no need for callID */
-- if (t.dst.ip == ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.ip) {
-- /* expectation for PNS->PAC direction */
-- t.src.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- } else {
-- /* expectation for PAC->PNS direction */
-- t.dst.ip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.ip;
-- }
--
-- if (!ip_conntrack_change_expect(oldexp, &t)) {
-- DEBUGP("successfully changed expect\n");
-- } else {
-- DEBUGP("can't change expect\n");
-- }
-- break;
-- case PPTP_IN_CALL_REQUEST:
-- /* only need to nat in case PAC is behind NAT box */
-- break;
-- case PPTP_WAN_ERROR_NOTIFY:
-- pcid = &pptpReq.wanerr->peersCallID;
-- break;
-- default:
-- DEBUGP("unknown inbound packet %s\n",
-- (msg <= PPTP_MSG_MAX)? strMName[msg]:strMName[0]);
-- /* fall through */
--
-- case PPTP_START_SESSION_REQUEST:
-- case PPTP_START_SESSION_REPLY:
-- case PPTP_STOP_SESSION_REQUEST:
-- case PPTP_ECHO_REQUEST:
-- case PPTP_ECHO_REPLY:
-- /* no need to alter packet */
-- return NF_ACCEPT;
-- }
--
-- /* mangle packet */
-- IP_NF_ASSERT(pcid);
-- DEBUGP("altering peer call id from 0x%04x to 0x%04x\n",
-- ntohs(*pcid), ntohs(new_pcid));
-- tcph->check = ip_nat_cheat_check(*pcid^0xFFFF,
-- new_pcid, tcph->check);
-- *pcid = new_pcid;
--
-- if (new_cid) {
-- IP_NF_ASSERT(cid);
-- DEBUGP("altering call id from 0x%04x to 0x%04x\n",
-- ntohs(*cid), ntohs(new_cid));
-- tcph->check = ip_nat_cheat_check(*cid^0xFFFF,
-- new_cid, tcph->check);
-- *cid = new_cid;
-- }
--
-- /* great, at least we don't need to resize packets */
-- return NF_ACCEPT;
--}
--
--
--static unsigned int tcp_help(struct ip_conntrack *ct,
-- struct ip_conntrack_expect *exp,
-- struct ip_nat_info *info,
-- enum ip_conntrack_info ctinfo,
-- unsigned int hooknum, struct sk_buff **pskb)
--{
-- struct iphdr *iph = (*pskb)->nh.iph;
-- struct tcphdr *tcph = (void *) iph + iph->ihl*4;
-- unsigned int datalen = (*pskb)->len - iph->ihl*4 - tcph->doff*4;
-- struct pptp_pkt_hdr *pptph;
-- void *datalimit;
--
-- int dir;
--
-- DEBUGP("entering\n");
--
-- /* Only mangle things once: original direction in POST_ROUTING
-- and reply direction on PRE_ROUTING. */
-- dir = CTINFO2DIR(ctinfo);
-- if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-- || (hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY))) {
-- DEBUGP("Not touching dir %s at hook %s\n",
-- dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY",
-- hooknum == NF_IP_POST_ROUTING ? "POSTROUTING"
-- : hooknum == NF_IP_PRE_ROUTING ? "PREROUTING"
-- : hooknum == NF_IP_LOCAL_OUT ? "OUTPUT" : "???");
-- return NF_ACCEPT;
-- }
--
-- /* if packet is too small, just skip it */
-- if (datalen < sizeof(struct pptp_pkt_hdr)+
-- sizeof(struct PptpControlHeader)) {
-- DEBUGP("pptp packet too short\n");
-- return NF_ACCEPT;
-- }
--
--
-- pptph = (struct pptp_pkt_hdr *) ((void *)tcph + tcph->doff*4);
-- datalimit = (void *) pptph + datalen;
--
-- LOCK_BH(&ip_pptp_lock);
--
-- if (dir == IP_CT_DIR_ORIGINAL) {
-- /* reuqests sent by client to server (PNS->PAC) */
-- pptp_outbound_pkt(tcph, pptph, datalen, ct, ctinfo, exp);
-- } else {
-- /* response from the server to the client (PAC->PNS) */
-- pptp_inbound_pkt(tcph, pptph, datalen, ct, ctinfo, exp);
-- }
--
-- UNLOCK_BH(&ip_pptp_lock);
--
-- return NF_ACCEPT;
--}
--
--/* nat helper struct for control connection */
--static struct ip_nat_helper pptp_tcp_helper = {
-- { NULL, NULL },
-- "pptp", IP_NAT_HELPER_F_ALWAYS, THIS_MODULE,
-- { { 0, { tcp: { port: __constant_htons(PPTP_CONTROL_PORT) } } },
-- { 0, { 0 }, IPPROTO_TCP } },
-- { { 0, { tcp: { port: 0xFFFF } } },
-- { 0, { 0 }, 0xFFFF } },
-- tcp_help, pptp_nat_expected };
--
--
--static int __init init(void)
--{
-- DEBUGP("init_module\n" );
--
-- if (ip_nat_helper_register(&pptp_tcp_helper))
-- return -EIO;
--
-- return 0;
--}
--
--static void __exit fini(void)
--{
-- DEBUGP("cleanup_module\n" );
-- ip_nat_helper_unregister(&pptp_tcp_helper);
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_proto_gre.c linux.stock/net/ipv4/netfilter/ip_nat_proto_gre.c
---- linux/net/ipv4/netfilter/ip_nat_proto_gre.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_proto_gre.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,212 +0,0 @@
--/*
-- * ip_nat_proto_gre.c - Version 1.11
-- *
-- * NAT protocol helper module for GRE.
-- *
-- * GRE is a generic encapsulation protocol, which is generally not very
-- * suited for NAT, as it has no protocol-specific part as port numbers.
-- *
-- * It has an optional key field, which may help us distinguishing two
-- * connections between the same two hosts.
-- *
-- * GRE is defined in RFC 1701 and RFC 1702, as well as RFC 2784
-- *
-- * PPTP is built on top of a modified version of GRE, and has a mandatory
-- * field called "CallID", which serves us for the same purpose as the key
-- * field in plain GRE.
-- *
-- * Documentation about PPTP can be found in RFC 2637
-- *
-- * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>
-- *
-- * Development of this code funded by Astaro AG (http://www.astaro.com/)
-- *
-- */
--
--#include <linux/config.h>
--#include <linux/module.h>
--#include <linux/ip.h>
--#include <linux/netfilter_ipv4/ip_nat.h>
--#include <linux/netfilter_ipv4/ip_nat_rule.h>
--#include <linux/netfilter_ipv4/ip_nat_protocol.h>
--#include <linux/netfilter_ipv4/ip_conntrack_proto_gre.h>
--
--MODULE_LICENSE("GPL");
--MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
--MODULE_DESCRIPTION("Netfilter NAT protocol helper module for GRE");
--
--#define DEBUGP(x, args...)
--
--/* is key in given range between min and max */
--static int
--gre_in_range(const struct ip_conntrack_tuple *tuple,
-- enum ip_nat_manip_type maniptype,
-- const union ip_conntrack_manip_proto *min,
-- const union ip_conntrack_manip_proto *max)
--{
-- return ntohl(tuple->src.u.gre.key) >= ntohl(min->gre.key)
-- && ntohl(tuple->src.u.gre.key) <= ntohl(max->gre.key);
--}
--
--/* generate unique tuple ... */
--static int
--gre_unique_tuple(struct ip_conntrack_tuple *tuple,
-- const struct ip_nat_range *range,
-- enum ip_nat_manip_type maniptype,
-- const struct ip_conntrack *conntrack)
--{
-- u_int32_t min, i, range_size;
-- u_int32_t key = 0, *keyptr;
--
-- if (maniptype == IP_NAT_MANIP_SRC)
-- keyptr = &tuple->src.u.gre.key;
-- else
-- keyptr = &tuple->dst.u.gre.key;
--
-- if (!(range->flags & IP_NAT_RANGE_PROTO_SPECIFIED)) {
--
-- switch (tuple->dst.u.gre.version) {
-- case 0:
-- DEBUGP("NATing GRE version 0 (ct=%p)\n",
-- conntrack);
-- min = 1;
-- range_size = 0xffffffff;
-- break;
-- case GRE_VERSION_PPTP:
-- DEBUGP("%p: NATing GRE PPTP\n",
-- conntrack);
-- min = 1;
-- range_size = 0xffff;
-- break;
-- default:
-- printk(KERN_WARNING "nat_gre: unknown GRE version\n");
-- return 0;
-- break;
-- }
--
-- } else {
-- min = ntohl(range->min.gre.key);
-- range_size = ntohl(range->max.gre.key) - min + 1;
-- }
--
-- DEBUGP("min = %u, range_size = %u\n", min, range_size);
--
-- for (i = 0; i < range_size; i++, key++) {
-- *keyptr = htonl(min + key % range_size);
-- if (!ip_nat_used_tuple(tuple, conntrack))
-- return 1;
-- }
--
-- DEBUGP("%p: no NAT mapping\n", conntrack);
--
-- return 0;
--}
--
--/* manipulate a GRE packet according to maniptype */
--static void
--gre_manip_pkt(struct iphdr *iph, size_t len,
-- const struct ip_conntrack_manip *manip,
-- enum ip_nat_manip_type maniptype)
--{
-- struct gre_hdr *greh = (struct gre_hdr *)((u_int32_t *)iph+iph->ihl);
-- struct gre_hdr_pptp *pgreh = (struct gre_hdr_pptp *) greh;
--
-- /* we only have destination manip of a packet, since 'source key'
-- * is not present in the packet itself */
-- if (maniptype == IP_NAT_MANIP_DST) {
-- /* key manipulation is always dest */
-- switch (greh->version) {
-- case 0:
-- if (!greh->key) {
-- DEBUGP("can't nat GRE w/o key\n");
-- break;
-- }
-- if (greh->csum) {
-- *(gre_csum(greh)) =
-- ip_nat_cheat_check(~*(gre_key(greh)),
-- manip->u.gre.key,
-- *(gre_csum(greh)));
-- }
-- *(gre_key(greh)) = manip->u.gre.key;
-- break;
-- case GRE_VERSION_PPTP:
-- DEBUGP("call_id -> 0x%04x\n",
-- ntohl(manip->u.gre.key));
-- pgreh->call_id = htons(ntohl(manip->u.gre.key));
-- break;
-- default:
-- DEBUGP("can't nat unknown GRE version\n");
-- break;
-- }
-- }
--}
--
--/* print out a nat tuple */
--static unsigned int
--gre_print(char *buffer,
-- const struct ip_conntrack_tuple *match,
-- const struct ip_conntrack_tuple *mask)
--{
-- unsigned int len = 0;
--
-- if (mask->dst.u.gre.version)
-- len += sprintf(buffer + len, "version=%d ",
-- ntohs(match->dst.u.gre.version));
--
-- if (mask->dst.u.gre.protocol)
-- len += sprintf(buffer + len, "protocol=0x%x ",
-- ntohs(match->dst.u.gre.protocol));
--
-- if (mask->src.u.gre.key)
-- len += sprintf(buffer + len, "srckey=0x%x ",
-- ntohl(match->src.u.gre.key));
--
-- if (mask->dst.u.gre.key)
-- len += sprintf(buffer + len, "dstkey=0x%x ",
-- ntohl(match->src.u.gre.key));
--
-- return len;
--}
--
--/* print a range of keys */
--static unsigned int
--gre_print_range(char *buffer, const struct ip_nat_range *range)
--{
-- if (range->min.gre.key != 0
-- || range->max.gre.key != 0xFFFF) {
-- if (range->min.gre.key == range->max.gre.key)
-- return sprintf(buffer, "key 0x%x ",
-- ntohl(range->min.gre.key));
-- else
-- return sprintf(buffer, "keys 0x%u-0x%u ",
-- ntohl(range->min.gre.key),
-- ntohl(range->max.gre.key));
-- } else
-- return 0;
--}
--
--/* nat helper struct */
--static struct ip_nat_protocol gre =
-- { { NULL, NULL }, "GRE", IPPROTO_GRE,
-- gre_manip_pkt,
-- gre_in_range,
-- gre_unique_tuple,
-- gre_print,
-- gre_print_range
-- };
--
--static int __init init(void)
--{
-- if (ip_nat_protocol_register(&gre))
-- return -EIO;
--
-- return 0;
--}
--
--static void __exit fini(void)
--{
-- ip_nat_protocol_unregister(&gre);
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_standalone.c linux.stock/net/ipv4/netfilter/ip_nat_standalone.c
---- linux/net/ipv4/netfilter/ip_nat_standalone.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_standalone.c 2004-05-09 04:13:03.000000000 -0400
-@@ -37,7 +37,11 @@
- #include <linux/netfilter_ipv4/ip_conntrack_core.h>
- #include <linux/netfilter_ipv4/listhelp.h>
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- #define HOOKNAME(hooknum) ((hooknum) == NF_IP_POST_ROUTING ? "POST_ROUTING" \
- : ((hooknum) == NF_IP_PRE_ROUTING ? "PRE_ROUTING" \
-@@ -354,6 +358,5 @@
- EXPORT_SYMBOL(ip_nat_helper_unregister);
- EXPORT_SYMBOL(ip_nat_cheat_check);
- EXPORT_SYMBOL(ip_nat_mangle_tcp_packet);
--EXPORT_SYMBOL(ip_nat_mangle_udp_packet);
- EXPORT_SYMBOL(ip_nat_used_tuple);
- MODULE_LICENSE("GPL");
-diff -Nurb linux/net/ipv4/netfilter/ip_nat_tftp.c linux.stock/net/ipv4/netfilter/ip_nat_tftp.c
---- linux/net/ipv4/netfilter/ip_nat_tftp.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_nat_tftp.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,186 +0,0 @@
--/*
-- * Licensed under GNU GPL version 2 Copyright Magnus Boden <mb@ozaba.mine.nu>
-- * Version: 0.0.7
-- *
-- * Thu 21 Mar 2002 Harald Welte <laforge@gnumonks.org>
-- * - Port to newnat API
-- *
-- * This module currently supports DNAT:
-- * iptables -t nat -A PREROUTING -d x.x.x.x -j DNAT --to-dest x.x.x.y
-- *
-- * and SNAT:
-- * iptables -t nat -A POSTROUTING { -j MASQUERADE , -j SNAT --to-source x.x.x.x }
-- *
-- * It has not been tested with
-- * -j SNAT --to-source x.x.x.x-x.x.x.y since I only have one external ip
-- * If you do test this please let me know if it works or not.
-- *
-- */
--
--#include <linux/module.h>
--#include <linux/netfilter_ipv4.h>
--#include <linux/ip.h>
--#include <linux/udp.h>
--
--#include <linux/netfilter.h>
--#include <linux/netfilter_ipv4/ip_tables.h>
--#include <linux/netfilter_ipv4/ip_conntrack_helper.h>
--#include <linux/netfilter_ipv4/ip_conntrack_tftp.h>
--#include <linux/netfilter_ipv4/ip_nat_helper.h>
--#include <linux/netfilter_ipv4/ip_nat_rule.h>
--
--MODULE_AUTHOR("Magnus Boden <mb@ozaba.mine.nu>");
--MODULE_DESCRIPTION("Netfilter NAT helper for tftp");
--MODULE_LICENSE("GPL");
--
--#define MAX_PORTS 8
--
--static int ports[MAX_PORTS];
--static int ports_c = 0;
--#ifdef MODULE_PARM
--MODULE_PARM(ports,"1-" __MODULE_STRING(MAX_PORTS) "i");
--MODULE_PARM_DESC(ports, "port numbers of tftp servers");
--#endif
--
--#define DEBUGP(format, args...)
--static unsigned int
--tftp_nat_help(struct ip_conntrack *ct,
-- struct ip_conntrack_expect *exp,
-- struct ip_nat_info *info,
-- enum ip_conntrack_info ctinfo,
-- unsigned int hooknum,
-- struct sk_buff **pskb)
--{
-- int dir = CTINFO2DIR(ctinfo);
-- struct iphdr *iph = (*pskb)->nh.iph;
-- struct udphdr *udph = (void *)iph + iph->ihl * 4;
-- struct tftphdr *tftph = (void *)udph + 8;
-- struct ip_conntrack_tuple repl;
--
-- if (!((hooknum == NF_IP_POST_ROUTING && dir == IP_CT_DIR_ORIGINAL)
-- || (hooknum == NF_IP_PRE_ROUTING && dir == IP_CT_DIR_REPLY)))
-- return NF_ACCEPT;
--
-- if (!exp) {
-- DEBUGP("no conntrack expectation to modify\n");
-- return NF_ACCEPT;
-- }
--
-- switch (ntohs(tftph->opcode)) {
-- /* RRQ and WRQ works the same way */
-- case TFTP_OPCODE_READ:
-- case TFTP_OPCODE_WRITE:
-- repl = ct->tuplehash[IP_CT_DIR_REPLY].tuple;
-- DEBUGP("");
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-- DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
-- DEBUGP("expecting: ");
-- DUMP_TUPLE_RAW(&repl);
-- DUMP_TUPLE_RAW(&exp->mask);
-- ip_conntrack_change_expect(exp, &repl);
-- break;
-- default:
-- DEBUGP("Unknown opcode\n");
-- }
--
-- return NF_ACCEPT;
--}
--
--static unsigned int
--tftp_nat_expected(struct sk_buff **pskb,
-- unsigned int hooknum,
-- struct ip_conntrack *ct,
-- struct ip_nat_info *info)
--{
-- const struct ip_conntrack *master = ct->master->expectant;
-- const struct ip_conntrack_tuple *orig =
-- &master->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-- struct ip_nat_multi_range mr;
--
-- IP_NF_ASSERT(info);
-- IP_NF_ASSERT(master);
-- IP_NF_ASSERT(!(info->initialized & (1 << HOOK2MANIP(hooknum))));
--
-- mr.rangesize = 1;
-- mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
--
-- if (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) {
-- mr.range[0].min_ip = mr.range[0].max_ip = orig->dst.ip;
-- DEBUGP("orig: %u.%u.%u.%u:%u <-> %u.%u.%u.%u:%u "
-- "newsrc: %u.%u.%u.%u\n",
-- NIPQUAD((*pskb)->nh.iph->saddr), ntohs(udph->source),
-- NIPQUAD((*pskb)->nh.iph->daddr), ntohs(udph->dest),
-- NIPQUAD(orig->dst.ip));
-- } else {
-- mr.range[0].min_ip = mr.range[0].max_ip = orig->src.ip;
-- mr.range[0].min.udp.port = mr.range[0].max.udp.port =
-- orig->src.u.udp.port;
-- mr.range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED;
--
-- DEBUGP("orig: %u.%u.%u.%u:%u <-> %u.%u.%u.%u:%u "
-- "newdst: %u.%u.%u.%u:%u\n",
-- NIPQUAD((*pskb)->nh.iph->saddr), ntohs(udph->source),
-- NIPQUAD((*pskb)->nh.iph->daddr), ntohs(udph->dest),
-- NIPQUAD(orig->src.ip), ntohs(orig->src.u.udp.port));
-- }
--
-- return ip_nat_setup_info(ct,&mr,hooknum);
--}
--
--static struct ip_nat_helper tftp[MAX_PORTS];
--static char tftp_names[MAX_PORTS][10];
--
--static void fini(void)
--{
-- int i;
--
-- for (i = 0 ; i < ports_c; i++) {
-- DEBUGP("unregistering helper for port %d\n", ports[i]);
-- ip_nat_helper_unregister(&tftp[i]);
-- }
--}
--
--static int __init init(void)
--{
-- int i, ret;
-- char *tmpname;
--
-- if (!ports[0])
-- ports[0] = TFTP_PORT;
--
-- for (i = 0 ; (i < MAX_PORTS) && ports[i] ; i++) {
-- memset(&tftp[i], 0, sizeof(struct ip_nat_helper));
--
-- tftp[i].tuple.dst.protonum = IPPROTO_UDP;
-- tftp[i].tuple.src.u.udp.port = htons(ports[i]);
-- tftp[i].mask.dst.protonum = 0xFFFF;
-- tftp[i].mask.src.u.udp.port = 0xFFFF;
-- tftp[i].help = tftp_nat_help;
-- tftp[i].flags = 0;
-- tftp[i].me = THIS_MODULE;
-- tftp[i].expect = tftp_nat_expected;
--
-- tmpname = &tftp_names[i][0];
-- if (ports[i] == TFTP_PORT)
-- sprintf(tmpname, "tftp");
-- else
-- sprintf(tmpname, "tftp-%d", i);
-- tftp[i].name = tmpname;
--
-- DEBUGP("ip_nat_tftp: registering for port %d: name %s\n",
-- ports[i], tftp[i].name);
-- ret = ip_nat_helper_register(&tftp[i]);
--
-- if (ret) {
-- printk("ip_nat_tftp: unable to register for port %d\n",
-- ports[i]);
-- fini();
-- return ret;
-- }
-- ports_c++;
-- }
-- return ret;
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_pool.c linux.stock/net/ipv4/netfilter/ip_pool.c
---- linux/net/ipv4/netfilter/ip_pool.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_pool.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,328 +0,0 @@
--/* Kernel module for IP pool management */
--
--#include <linux/module.h>
--#include <linux/ip.h>
--#include <linux/skbuff.h>
--#include <linux/netfilter_ipv4/ip_tables.h>
--#include <linux/netfilter_ipv4/ip_pool.h>
--#include <linux/errno.h>
--#include <asm/uaccess.h>
--#include <asm/bitops.h>
--#include <linux/interrupt.h>
--#include <linux/spinlock.h>
--
--#define DP(format, args...)
--
--MODULE_LICENSE("GPL");
--
--#define NR_POOL 16
--static int nr_pool = NR_POOL;/* overwrite this when loading module */
--
--struct ip_pool {
-- u_int32_t first_ip; /* host byte order, included in range */
-- u_int32_t last_ip; /* host byte order, included in range */
-- void *members; /* the bitmap proper */
-- int nr_use; /* total nr. of tests through this */
-- int nr_match; /* total nr. of matches through this */
-- rwlock_t lock;
--};
--
--static struct ip_pool *POOL;
--
--static inline struct ip_pool *lookup(ip_pool_t index)
--{
-- if (index < 0 || index >= nr_pool) {
-- DP("ip_pool:lookup: bad index %d\n", index);
-- return 0;
-- }
-- return POOL+index;
--}
--
--int ip_pool_match(ip_pool_t index, u_int32_t addr)
--{
-- struct ip_pool *pool = lookup(index);
-- int res = 0;
--
-- if (!pool || !pool->members)
-- return 0;
-- read_lock_bh(&pool->lock);
-- if (pool->members) {
-- if (addr >= pool->first_ip && addr <= pool->last_ip) {
-- addr -= pool->first_ip;
-- if (test_bit(addr, pool->members)) {
-- res = 1;
--#ifdef CONFIG_IP_POOL_STATISTICS
-- pool->nr_match++;
--#endif
-- }
-- }
--#ifdef CONFIG_IP_POOL_STATISTICS
-- pool->nr_use++;
--#endif
-- }
-- read_unlock_bh(&pool->lock);
-- return res;
--}
--
--static int pool_change(ip_pool_t index, u_int32_t addr, int isdel)
--{
-- struct ip_pool *pool;
-- int res = -1;
--
-- pool = lookup(index);
-- if ( !pool || !pool->members
-- || addr < pool->first_ip || addr > pool->last_ip)
-- return -1;
-- read_lock_bh(&pool->lock);
-- if (pool->members && addr >= pool->first_ip && addr <= pool->last_ip) {
-- addr -= pool->first_ip;
-- res = isdel
-- ? (0 != test_and_clear_bit(addr, pool->members))
-- : (0 != test_and_set_bit(addr, pool->members));
-- }
-- read_unlock_bh(&pool->lock);
-- return res;
--}
--
--int ip_pool_mod(ip_pool_t index, u_int32_t addr, int isdel)
--{
-- int res = pool_change(index,addr,isdel);
--
-- if (!isdel) res = !res;
-- return res;
--}
--
--static inline int bitmap_bytes(u_int32_t a, u_int32_t b)
--{
-- return 4*((((b-a+8)/8)+3)/4);
--}
--
--static inline int poolbytes(ip_pool_t index)
--{
-- struct ip_pool *pool = lookup(index);
--
-- return pool ? bitmap_bytes(pool->first_ip, pool->last_ip) : 0;
--}
--
--static int setpool(
-- struct sock *sk,
-- int optval,
-- void *user,
-- unsigned int len
--) {
-- struct ip_pool_request req;
--
-- DP("ip_pool:setpool: optval=%d, user=%p, len=%d\n", optval, user, len);
-- if (!capable(CAP_NET_ADMIN))
-- return -EPERM;
-- if (optval != SO_IP_POOL)
-- return -EBADF;
-- if (len != sizeof(req))
-- return -EINVAL;
-- if (copy_from_user(&req, user, sizeof(req)) != 0)
-- return -EFAULT;
-- printk("obsolete op - upgrade your ippool(8) utility.\n");
-- return -EINVAL;
--}
--
--static int getpool(
-- struct sock *sk,
-- int optval,
-- void *user,
-- int *len
--) {
-- struct ip_pool_request req;
-- struct ip_pool *pool;
-- ip_pool_t i;
-- int newbytes;
-- void *newmembers;
-- int res;
--
-- DP("ip_pool:getpool: optval=%d, user=%p\n", optval, user);
-- if (!capable(CAP_NET_ADMIN))
-- return -EINVAL;
-- if (optval != SO_IP_POOL)
-- return -EINVAL;
-- if (*len != sizeof(req)) {
-- return -EFAULT;
-- }
-- if (copy_from_user(&req, user, sizeof(req)) != 0)
-- return -EFAULT;
-- DP("ip_pool:getpool op=%d, index=%d\n", req.op, req.index);
-- if (req.op < IP_POOL_BAD001) {
-- printk("obsolete op - upgrade your ippool(8) utility.\n");
-- return -EFAULT;
-- }
-- switch(req.op) {
-- case IP_POOL_HIGH_NR:
-- DP("ip_pool HIGH_NR\n");
-- req.index = IP_POOL_NONE;
-- for (i=0; i<nr_pool; i++)
-- if (POOL[i].members)
-- req.index = i;
-- return copy_to_user(user, &req, sizeof(req));
-- case IP_POOL_LOOKUP:
-- DP("ip_pool LOOKUP\n");
-- pool = lookup(req.index);
-- if (!pool)
-- return -EINVAL;
-- if (!pool->members)
-- return -EBADF;
-- req.addr = htonl(pool->first_ip);
-- req.addr2 = htonl(pool->last_ip);
-- return copy_to_user(user, &req, sizeof(req));
-- case IP_POOL_USAGE:
-- DP("ip_pool USE\n");
-- pool = lookup(req.index);
-- if (!pool)
-- return -EINVAL;
-- if (!pool->members)
-- return -EBADF;
-- req.addr = pool->nr_use;
-- req.addr2 = pool->nr_match;
-- return copy_to_user(user, &req, sizeof(req));
-- case IP_POOL_TEST_ADDR:
-- DP("ip_pool TEST 0x%08x\n", req.addr);
-- pool = lookup(req.index);
-- if (!pool)
-- return -EINVAL;
-- res = 0;
-- read_lock_bh(&pool->lock);
-- if (!pool->members) {
-- DP("ip_pool TEST_ADDR no members in pool\n");
-- res = -EBADF;
-- goto unlock_and_return_res;
-- }
-- req.addr = ntohl(req.addr);
-- if (req.addr < pool->first_ip) {
-- DP("ip_pool TEST_ADDR address < pool bounds\n");
-- res = -ERANGE;
-- goto unlock_and_return_res;
-- }
-- if (req.addr > pool->last_ip) {
-- DP("ip_pool TEST_ADDR address > pool bounds\n");
-- res = -ERANGE;
-- goto unlock_and_return_res;
-- }
-- req.addr = (0 != test_bit((req.addr - pool->first_ip),
-- pool->members));
-- read_unlock_bh(&pool->lock);
-- return copy_to_user(user, &req, sizeof(req));
-- case IP_POOL_FLUSH:
-- DP("ip_pool FLUSH not yet implemented.\n");
-- return -EBUSY;
-- case IP_POOL_DESTROY:
-- DP("ip_pool DESTROY not yet implemented.\n");
-- return -EBUSY;
-- case IP_POOL_INIT:
-- DP("ip_pool INIT 0x%08x-0x%08x\n", req.addr, req.addr2);
-- pool = lookup(req.index);
-- if (!pool)
-- return -EINVAL;
-- req.addr = ntohl(req.addr);
-- req.addr2 = ntohl(req.addr2);
-- if (req.addr > req.addr2) {
-- DP("ip_pool INIT bad ip range\n");
-- return -EINVAL;
-- }
-- newbytes = bitmap_bytes(req.addr, req.addr2);
-- newmembers = kmalloc(newbytes, GFP_KERNEL);
-- if (!newmembers) {
-- DP("ip_pool INIT out of mem for %d bytes\n", newbytes);
-- return -ENOMEM;
-- }
-- memset(newmembers, 0, newbytes);
-- write_lock_bh(&pool->lock);
-- if (pool->members) {
-- DP("ip_pool INIT pool %d exists\n", req.index);
-- kfree(newmembers);
-- res = -EBUSY;
-- goto unlock_and_return_res;
-- }
-- pool->first_ip = req.addr;
-- pool->last_ip = req.addr2;
-- pool->nr_use = 0;
-- pool->nr_match = 0;
-- pool->members = newmembers;
-- write_unlock_bh(&pool->lock);
-- return 0;
-- case IP_POOL_ADD_ADDR:
-- DP("ip_pool ADD_ADDR 0x%08x\n", req.addr);
-- req.addr = pool_change(req.index, ntohl(req.addr), 0);
-- return copy_to_user(user, &req, sizeof(req));
-- case IP_POOL_DEL_ADDR:
-- DP("ip_pool DEL_ADDR 0x%08x\n", req.addr);
-- req.addr = pool_change(req.index, ntohl(req.addr), 1);
-- return copy_to_user(user, &req, sizeof(req));
-- default:
-- DP("ip_pool:getpool bad op %d\n", req.op);
-- return -EINVAL;
-- }
-- return -EINVAL;
--
--unlock_and_return_res:
-- if (pool)
-- read_unlock_bh(&pool->lock);
-- return res;
--}
--
--static struct nf_sockopt_ops so_pool
--= { { NULL, NULL }, PF_INET,
-- SO_IP_POOL, SO_IP_POOL+1, &setpool,
-- SO_IP_POOL, SO_IP_POOL+1, &getpool,
-- 0, NULL };
--
--MODULE_PARM(nr_pool, "i");
--
--static int __init init(void)
--{
-- ip_pool_t i;
-- int res;
--
-- if (nr_pool < 1) {
-- printk("ip_pool module init: bad nr_pool %d\n", nr_pool);
-- return -EINVAL;
-- }
-- POOL = kmalloc(nr_pool * sizeof(*POOL), GFP_KERNEL);
-- if (!POOL) {
-- printk("ip_pool module init: out of memory for nr_pool %d\n",
-- nr_pool);
-- return -ENOMEM;
-- }
-- for (i=0; i<nr_pool; i++) {
-- POOL[i].first_ip = 0;
-- POOL[i].last_ip = 0;
-- POOL[i].members = 0;
-- POOL[i].nr_use = 0;
-- POOL[i].nr_match = 0;
-- POOL[i].lock = RW_LOCK_UNLOCKED;
-- }
-- res = nf_register_sockopt(&so_pool);
-- DP("ip_pool:init %d pools, result %d\n", nr_pool, res);
-- if (res != 0) {
-- kfree(POOL);
-- POOL = 0;
-- }
-- return res;
--}
--
--static void __exit fini(void)
--{
-- ip_pool_t i;
--
-- DP("ip_pool:fini BYEBYE\n");
-- nf_unregister_sockopt(&so_pool);
-- for (i=0; i<nr_pool; i++) {
-- if (POOL[i].members) {
-- kfree(POOL[i].members);
-- POOL[i].members = 0;
-- }
-- }
-- kfree(POOL);
-- POOL = 0;
-- DP("ip_pool:fini these are the famous last words\n");
-- return;
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv4/netfilter/ip_tables.c linux.stock/net/ipv4/netfilter/ip_tables.c
---- linux/net/ipv4/netfilter/ip_tables.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ip_tables.c 2004-05-09 04:13:03.000000000 -0400
-@@ -62,6 +62,11 @@
- #include <linux/netfilter_ipv4/lockhelp.h>
- #include <linux/netfilter_ipv4/listhelp.h>
-
-+#if 0
-+/* All the better to debug you with... */
-+#define static
-+#define inline
-+#endif
-
- /* Locking is simple: we assume at worst case there will be one packet
- in user context and one from bottom halves (or soft irq if Alexey's
-@@ -83,6 +88,7 @@
- {
- /* Size per table */
- unsigned int size;
-+ /* Number of entries: FIXME. --RR */
- unsigned int number;
- /* Initial number of entries. Needed for module usage count */
- unsigned int initial_entries;
-@@ -106,6 +112,11 @@
- #define TABLE_OFFSET(t,p) 0
- #endif
-
-+#if 0
-+#define down(x) do { printk("DOWN:%u:" #x "\n", __LINE__); down(x); } while(0)
-+#define down_interruptible(x) ({ int __r; printk("DOWNi:%u:" #x "\n", __LINE__); __r = down_interruptible(x); if (__r != 0) printk("ABORT-DOWNi:%u\n", __LINE__); __r; })
-+#define up(x) do { printk("UP:%u:" #x "\n", __LINE__); up(x); } while(0)
-+#endif
-
- /* Returns whether matches rule or not. */
- static inline int
-@@ -408,6 +419,12 @@
- {
- void *ret;
-
-+#if 0
-+ duprintf("find_inlist: searching for `%s' in %s.\n",
-+ name, head == &ipt_target ? "ipt_target"
-+ : head == &ipt_match ? "ipt_match"
-+ : head == &ipt_tables ? "ipt_tables" : "UNKNOWN");
-+#endif
-
- *error = down_interruptible(mutex);
- if (*error != 0)
-@@ -745,6 +762,8 @@
- newinfo->underflow[h] = underflows[h];
- }
-
-+ /* FIXME: underflows must be unconditional, standard verdicts
-+ < 0 (not IPT_RETURN). --RR */
-
- /* Clear counters and comefrom */
- e->counters = ((struct ipt_counters) { 0, 0 });
-@@ -957,6 +976,7 @@
- goto free_counters;
- }
-
-+ /* FIXME: use iterator macros --RR */
- /* ... then go back and fix counters and names */
- for (off = 0, num = 0; off < total_size; off += e->next_offset, num++){
- unsigned int i;
-@@ -1134,6 +1154,14 @@
- const struct ipt_counters addme[],
- unsigned int *i)
- {
-+#if 0
-+ duprintf("add_counter: Entry %u %lu/%lu + %lu/%lu\n",
-+ *i,
-+ (long unsigned int)e->counters.pcnt,
-+ (long unsigned int)e->counters.bcnt,
-+ (long unsigned int)addme[*i].pcnt,
-+ (long unsigned int)addme[*i].bcnt);
-+#endif
-
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
-@@ -1495,6 +1523,7 @@
- return 0;
- }
-
-+ /* FIXME: Try tcp doff >> packet len against various stacks --RR */
-
- #define FWINVTCP(bool,invflg) ((bool) ^ !!(tcpinfo->invflags & invflg))
-
-@@ -1670,15 +1699,14 @@
- = { { NULL, NULL }, "icmp", &icmp_match, &icmp_checkentry, NULL };
-
- #ifdef CONFIG_PROC_FS
--static inline int print_name(const char *i,
-+static inline int print_name(const struct ipt_table *t,
- off_t start_offset, char *buffer, int length,
- off_t *pos, unsigned int *count)
- {
- if ((*count)++ >= start_offset) {
- unsigned int namelen;
-
-- namelen = sprintf(buffer + *pos, "%s\n",
-- i + sizeof(struct list_head));
-+ namelen = sprintf(buffer + *pos, "%s\n", t->name);
- if (*pos + namelen > length) {
- /* Stop iterating */
- return 1;
-@@ -1696,7 +1724,7 @@
- if (down_interruptible(&ipt_mutex) != 0)
- return 0;
-
-- LIST_FIND(&ipt_tables, print_name, void *,
-+ LIST_FIND(&ipt_tables, print_name, struct ipt_table *,
- offset, buffer, length, &pos, &count);
-
- up(&ipt_mutex);
-@@ -1705,46 +1733,6 @@
- *start=(char *)((unsigned long)count-offset);
- return pos;
- }
--
--static int ipt_get_targets(char *buffer, char **start, off_t offset, int length)
--{
-- off_t pos = 0;
-- unsigned int count = 0;
--
-- if (down_interruptible(&ipt_mutex) != 0)
-- return 0;
--
-- LIST_FIND(&ipt_target, print_name, void *,
-- offset, buffer, length, &pos, &count);
--
-- up(&ipt_mutex);
--
-- *start = (char *)((unsigned long)count - offset);
-- return pos;
--}
--
--static int ipt_get_matches(char *buffer, char **start, off_t offset, int length)
--{
-- off_t pos = 0;
-- unsigned int count = 0;
--
-- if (down_interruptible(&ipt_mutex) != 0)
-- return 0;
--
-- LIST_FIND(&ipt_match, print_name, void *,
-- offset, buffer, length, &pos, &count);
--
-- up(&ipt_mutex);
--
-- *start = (char *)((unsigned long)count - offset);
-- return pos;
--}
--
--static struct { char *name; get_info_t *get_info; } ipt_proc_entry[] =
--{ { "ip_tables_names", ipt_get_tables },
-- { "ip_tables_targets", ipt_get_targets },
-- { "ip_tables_matches", ipt_get_matches },
-- { NULL, NULL} };
- #endif /*CONFIG_PROC_FS*/
-
- static int __init init(void)
-@@ -1770,20 +1758,14 @@
- #ifdef CONFIG_PROC_FS
- {
- struct proc_dir_entry *proc;
-- int i;
-
-- for (i = 0; ipt_proc_entry[i].name; i++) {
-- proc = proc_net_create(ipt_proc_entry[i].name, 0,
-- ipt_proc_entry[i].get_info);
-+ proc = proc_net_create("ip_tables_names", 0, ipt_get_tables);
- if (!proc) {
-- while (--i >= 0)
-- proc_net_remove(ipt_proc_entry[i].name);
- nf_unregister_sockopt(&ipt_sockopts);
- return -ENOMEM;
- }
- proc->owner = THIS_MODULE;
- }
-- }
- #endif
-
- printk("ip_tables: (C) 2000-2002 Netfilter core team\n");
-@@ -1794,11 +1776,7 @@
- {
- nf_unregister_sockopt(&ipt_sockopts);
- #ifdef CONFIG_PROC_FS
-- {
-- int i;
-- for (i = 0; ipt_proc_entry[i].name; i++)
-- proc_net_remove(ipt_proc_entry[i].name);
-- }
-+ proc_net_remove("ip_tables_names");
- #endif
- }
-
-diff -Nurb linux/net/ipv4/netfilter/ipchains_core.c linux.stock/net/ipv4/netfilter/ipchains_core.c
---- linux/net/ipv4/netfilter/ipchains_core.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipchains_core.c 2004-05-09 04:13:03.000000000 -0400
-@@ -977,10 +977,17 @@
- || ftmp->ipfw.fw_dst.s_addr!=frwl->ipfw.fw_dst.s_addr
- || ftmp->ipfw.fw_smsk.s_addr!=frwl->ipfw.fw_smsk.s_addr
- || ftmp->ipfw.fw_dmsk.s_addr!=frwl->ipfw.fw_dmsk.s_addr
-+#if 0
-+ || ftmp->ipfw.fw_flg!=frwl->ipfw.fw_flg
-+#else
- || ((ftmp->ipfw.fw_flg & ~IP_FW_F_MARKABS)
- != (frwl->ipfw.fw_flg & ~IP_FW_F_MARKABS))
-+#endif
- || ftmp->ipfw.fw_invflg!=frwl->ipfw.fw_invflg
- || ftmp->ipfw.fw_proto!=frwl->ipfw.fw_proto
-+#if 0
-+ || ftmp->ipfw.fw_mark!=frwl->ipfw.fw_mark
-+#endif
- || ftmp->ipfw.fw_redirpt!=frwl->ipfw.fw_redirpt
- || ftmp->ipfw.fw_spts[0]!=frwl->ipfw.fw_spts[0]
- || ftmp->ipfw.fw_spts[1]!=frwl->ipfw.fw_spts[1]
-@@ -1566,6 +1573,7 @@
- )
- {
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,29)
-+ /* FIXME: No more `atomic' read and reset. Wonderful 8-( --RR */
- int reset = 0;
- #endif
- struct ip_chain *i;
-diff -Nurb linux/net/ipv4/netfilter/ipfwadm_core.c linux.stock/net/ipv4/netfilter/ipfwadm_core.c
---- linux/net/ipv4/netfilter/ipfwadm_core.c 2003-10-14 04:09:33.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipfwadm_core.c 2004-05-09 04:13:03.000000000 -0400
-@@ -20,7 +20,7 @@
- * license in recognition of the original copyright.
- * -- Alan Cox.
- *
-- * $Id: ipfwadm_core.c,v 1.1.1.4 2003/10/14 08:09:33 sparq Exp $
-+ * $Id: ipfwadm_core.c,v 1.9.2.2 2002/01/24 15:50:42 davem Exp $
- *
- * Ported from BSD to Linux,
- * Alan Cox 22/Nov/1994.
-@@ -1205,6 +1205,7 @@
- )
- {
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,29)
-+ /* FIXME: No more `atomic' read and reset. Wonderful 8-( --RR */
- int reset = 0;
- #endif
- return ip_chain_procinfo(IP_FW_ACCT, buffer,start, offset,length,
-@@ -1223,6 +1224,7 @@
- )
- {
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,29)
-+ /* FIXME: No more `atomic' read and reset. Wonderful 8-( --RR */
- int reset = 0;
- #endif
- return ip_chain_procinfo(IP_FW_IN, buffer,start,offset,length,
-@@ -1237,6 +1239,7 @@
- )
- {
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,29)
-+ /* FIXME: No more `atomic' read and reset. Wonderful 8-( --RR */
- int reset = 0;
- #endif
- return ip_chain_procinfo(IP_FW_OUT, buffer,start,offset,length,
-@@ -1251,6 +1254,7 @@
- )
- {
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,29)
-+ /* FIXME: No more `atomic' read and reset. Wonderful 8-( --RR */
- int reset = 0;
- #endif
- return ip_chain_procinfo(IP_FW_FWD, buffer,start,offset,length,
-diff -Nurb linux/net/ipv4/netfilter/ipt_ECN.c linux.stock/net/ipv4/netfilter/ipt_ECN.c
---- linux/net/ipv4/netfilter/ipt_ECN.c 2003-10-14 04:02:57.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipt_ECN.c 2004-05-09 04:13:03.000000000 -0400
-@@ -87,8 +87,8 @@
- }
-
- if (diffs[0] != *tcpflags) {
-- diffs[0] = diffs[0] ^ 0xFFFF;
-- diffs[1] = *tcpflags;
-+ diffs[0] = htons(diffs[0]) ^ 0xFFFF;
-+ diffs[1] = htons(*tcpflags);
- tcph->check = csum_fold(csum_partial((char *)diffs,
- sizeof(diffs),
- tcph->check^0xFFFF));
-diff -Nurb linux/net/ipv4/netfilter/ipt_LOG.c linux.stock/net/ipv4/netfilter/ipt_LOG.c
---- linux/net/ipv4/netfilter/ipt_LOG.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipt_LOG.c 2004-05-09 04:13:03.000000000 -0400
-@@ -14,11 +14,15 @@
- #include <net/route.h>
- #include <linux/netfilter_ipv4/ipt_LOG.h>
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- struct esphdr {
- __u32 spi;
--};
-+}; /* FIXME evil kludge */
-
- /* Use lock to serialize, so printks don't overlap */
- static spinlock_t log_lock = SPIN_LOCK_UNLOCKED;
-diff -Nurb linux/net/ipv4/netfilter/ipt_REJECT.c linux.stock/net/ipv4/netfilter/ipt_REJECT.c
---- linux/net/ipv4/netfilter/ipt_REJECT.c 2003-07-04 04:12:31.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipt_REJECT.c 2004-05-09 04:13:03.000000000 -0400
-@@ -6,8 +6,6 @@
- #include <linux/module.h>
- #include <linux/skbuff.h>
- #include <linux/ip.h>
--#include <linux/udp.h>
--#include <linux/icmp.h>
- #include <net/icmp.h>
- #include <net/ip.h>
- #include <net/tcp.h>
-@@ -16,7 +14,11 @@
- #include <linux/netfilter_ipv4/ip_tables.h>
- #include <linux/netfilter_ipv4/ipt_REJECT.h>
-
-+#if 0
-+#define DEBUGP printk
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- /* If the original packet is part of a connection, but the connection
- is not confirmed, our manufactured reply will not be associated
-@@ -155,7 +157,6 @@
- static void send_unreach(struct sk_buff *skb_in, int code)
- {
- struct iphdr *iph;
-- struct udphdr *udph;
- struct icmphdr *icmph;
- struct sk_buff *nskb;
- u32 saddr;
-@@ -167,6 +168,7 @@
- if (!rt)
- return;
-
-+ /* FIXME: Use sysctl number. --RR */
- if (!xrlim_allow(&rt->u.dst, 1*HZ))
- return;
-
-@@ -184,19 +186,6 @@
- if (iph->frag_off&htons(IP_OFFSET))
- return;
-
-- /* if UDP checksum is set, verify it's correct */
-- if (iph->protocol == IPPROTO_UDP
-- && skb_in->tail-(u8*)iph >= sizeof(struct udphdr)) {
-- int datalen = skb_in->len - (iph->ihl<<2);
-- udph = (struct udphdr *)((char *)iph + (iph->ihl<<2));
-- if (udph->check
-- && csum_tcpudp_magic(iph->saddr, iph->daddr,
-- datalen, IPPROTO_UDP,
-- csum_partial((char *)udph, datalen,
-- 0)) != 0)
-- return;
-- }
--
- /* If we send an ICMP error to an ICMP error a mess would result.. */
- if (iph->protocol == IPPROTO_ICMP
- && skb_in->tail-(u8*)iph >= sizeof(struct icmphdr)) {
-@@ -271,6 +260,7 @@
- /* Copy as much of original packet as will fit */
- data = skb_put(nskb,
- length - sizeof(struct iphdr) - sizeof(struct icmphdr));
-+ /* FIXME: won't work with nonlinear skbs --RR */
- memcpy(data, skb_in->nh.iph,
- length - sizeof(struct iphdr) - sizeof(struct icmphdr));
- icmph->checksum = ip_compute_csum((unsigned char *)icmph,
-diff -Nurb linux/net/ipv4/netfilter/ipt_ULOG.c linux.stock/net/ipv4/netfilter/ipt_ULOG.c
---- linux/net/ipv4/netfilter/ipt_ULOG.c 2003-07-04 04:12:32.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipt_ULOG.c 2004-05-09 04:13:03.000000000 -0400
-@@ -12,7 +12,6 @@
- * module loadtime -HW
- * 2002/07/07 remove broken nflog_rcv() function -HW
- * 2002/08/29 fix shifted/unshifted nlgroup bug -HW
-- * 2002/10/30 fix uninitialized mac_len field - <Anders K. Pedersen>
- *
- * Released under the terms of the GPL
- *
-@@ -32,7 +31,7 @@
- * Specify, after how many clock ticks (intel: 100 per second) the queue
- * should be flushed even if it is not full yet.
- *
-- * ipt_ULOG.c,v 1.22 2002/10/30 09:07:31 laforge Exp
-+ * ipt_ULOG.c,v 1.21 2002/08/29 10:54:34 laforge Exp
- */
-
- #include <linux/module.h>
-@@ -60,7 +59,12 @@
- #define ULOG_NL_EVENT 111 /* Harald's favorite number */
- #define ULOG_MAXNLGROUPS 32 /* numer of nlgroups */
-
-+#if 0
-+#define DEBUGP(format, args...) printk(__FILE__ ":" __FUNCTION__ ":" \
-+ format, ## args)
-+#else
- #define DEBUGP(format, args...)
-+#endif
-
- #define PRINTR(format, args...) do { if (net_ratelimit()) printk(format, ## args); } while (0)
-
-@@ -220,8 +224,7 @@
- && in->hard_header_len <= ULOG_MAC_LEN) {
- memcpy(pm->mac, (*pskb)->mac.raw, in->hard_header_len);
- pm->mac_len = in->hard_header_len;
-- } else
-- pm->mac_len = 0;
-+ }
-
- if (in)
- strncpy(pm->indev_name, in->name, sizeof(pm->indev_name));
-diff -Nurb linux/net/ipv4/netfilter/ipt_multiport.c linux.stock/net/ipv4/netfilter/ipt_multiport.c
---- linux/net/ipv4/netfilter/ipt_multiport.c 2003-07-04 04:12:32.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipt_multiport.c 2004-05-09 04:13:03.000000000 -0400
-@@ -8,7 +8,11 @@
- #include <linux/netfilter_ipv4/ipt_multiport.h>
- #include <linux/netfilter_ipv4/ip_tables.h>
-
-+#if 0
-+#define duprintf(format, args...) printk(format , ## args)
-+#else
- #define duprintf(format, args...)
-+#endif
-
- /* Returns 1 if the port is matched by the test, 0 otherwise. */
- static inline int
-@@ -74,7 +78,7 @@
-
- /* Must specify proto == TCP/UDP, no unknown flags or bad count */
- return (ip->proto == IPPROTO_TCP || ip->proto == IPPROTO_UDP)
-- && !(ip->invflags & IPT_INV_PROTO)
-+ && !(ip->flags & IPT_INV_PROTO)
- && matchsize == IPT_ALIGN(sizeof(struct ipt_multiport))
- && (multiinfo->flags == IPT_MULTIPORT_SOURCE
- || multiinfo->flags == IPT_MULTIPORT_DESTINATION
-diff -Nurb linux/net/ipv4/netfilter/ipt_pool.c linux.stock/net/ipv4/netfilter/ipt_pool.c
---- linux/net/ipv4/netfilter/ipt_pool.c 2003-07-04 04:12:32.000000000 -0400
-+++ linux.stock/net/ipv4/netfilter/ipt_pool.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,71 +0,0 @@
--/* Kernel module to match an IP address pool. */
--
--#include <linux/module.h>
--#include <linux/ip.h>
--#include <linux/skbuff.h>
--
--#include <linux/netfilter_ipv4/ip_tables.h>
--#include <linux/netfilter_ipv4/ip_pool.h>
--#include <linux/netfilter_ipv4/ipt_pool.h>
--
--static inline int match_pool(
-- ip_pool_t index,
-- __u32 addr,
-- int inv
--) {
-- if (ip_pool_match(index, ntohl(addr)))
-- inv = !inv;
-- return inv;
--}
--
--static int match(
-- const struct sk_buff *skb,
-- const struct net_device *in,
-- const struct net_device *out,
-- const void *matchinfo,
-- int offset,
-- const void *hdr,
-- u_int16_t datalen,
-- int *hotdrop
--) {
-- const struct ipt_pool_info *info = matchinfo;
-- const struct iphdr *iph = skb->nh.iph;
--
-- if (info->src != IP_POOL_NONE && !match_pool(info->src, iph->saddr,
-- info->flags&IPT_POOL_INV_SRC))
-- return 0;
--
-- if (info->dst != IP_POOL_NONE && !match_pool(info->dst, iph->daddr,
-- info->flags&IPT_POOL_INV_DST))
-- return 0;
--
-- return 1;
--}
--
--static int checkentry(
-- const char *tablename,
-- const struct ipt_ip *ip,
-- void *matchinfo,
-- unsigned int matchsize,
-- unsigned int hook_mask
--) {
-- if (matchsize != IPT_ALIGN(sizeof(struct ipt_pool_info)))
-- return 0;
-- return 1;
--}
--
--static struct ipt_match pool_match
--= { { NULL, NULL }, "pool", &match, &checkentry, NULL, THIS_MODULE };
--
--static int __init init(void)
--{
-- return ipt_register_match(&pool_match);
--}
--
--static void __exit fini(void)
--{
-- ipt_unregister_match(&pool_match);
--}
--
--module_init(init);
--module_exit(fini);
-diff -Nurb linux/net/ipv6/mcast.c linux.stock/net/ipv6/mcast.c
---- linux/net/ipv6/mcast.c 2003-10-14 04:09:34.000000000 -0400
-+++ linux.stock/net/ipv6/mcast.c 2004-05-09 04:13:22.000000000 -0400
-@@ -5,7 +5,7 @@
- * Authors:
- * Pedro Roque <roque@di.fc.ul.pt>
- *
-- * $Id: mcast.c,v 1.1.1.4 2003/10/14 08:09:34 sparq Exp $
-+ * $Id: mcast.c,v 1.38 2001/08/15 07:36:31 davem Exp $
- *
- * Based on linux/ipv4/igmp.c and linux/ipv4/ip_sockglue.c
- *
---- linux/include/linux/ppp-comp.h 2004-08-16 20:58:32.089851872 -0400
-+++ linux.stock/include/linux/ppp-comp.h 2004-08-16 20:59:48.217278744 -0400
-@@ -24,7 +24,7 @@
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
-- * $Id: ppp-comp.h,v 1.1.1.4 2003/10/14 08:09:26 sparq Exp $
-+ * $Id: ppp-comp.h,v 1.6 1997/11/27 06:04:44 paulus Exp $
- */
-
- /*
+++ /dev/null
---- ../../buildroot-unpacked/build_mipsel/linux/net/ipv4/netfilter/ip_conntrack_core.c 2004-11-28 22:59:36.000000000 -0500
-+++ linux/net/ipv4/netfilter/ip_conntrack_core.c 2004-11-30 05:05:32.000000000 -0500
-@@ -1386,7 +1386,7 @@
- nf_unregister_sockopt(&so_getorigdst);
- }
-
--static int hashsize = 0;
-+static int hashsize = 5953
- MODULE_PARM(hashsize, "i");
-
- int __init ip_conntrack_init(void)
-@@ -1407,7 +1407,7 @@
- if (ip_conntrack_htable_size < 16)
- ip_conntrack_htable_size = 16;
- }
-- ip_conntrack_max = 8 * ip_conntrack_htable_size;
-+ ip_conntrack_max = ip_conntrack_htable_size;
-
- printk("ip_conntrack version %s (%u buckets, %d max)"
- " - %Zd bytes per conntrack\n", IP_CONNTRACK_VERSION,
+++ /dev/null
---- linux/net/sched/sch_htb.c 2003-10-14 01:09:35.000000000 -0700
-+++ linux.2.4.26/net/sched/sch_htb.c 2004-05-10 00:05:51.000000000 -0700
-@@ -9,6 +9,8 @@
- * Authors: Martin Devera, <devik@cdi.cz>
- *
- * Credits (in time order) for older HTB versions:
-+ * Stef Coene <stef.coene@docum.org>
-+ * HTB support at LARTC mailing list
- * Ondrej Kraus, <krauso@barr.cz>
- * found missing INIT_QDISC(htb)
- * Vladimir Smelhaus, Aamer Akhter, Bert Hubert
-@@ -17,9 +19,13 @@
- * code review and helpful comments on shaping
- * Tomasz Wrona, <tw@eter.tym.pl>
- * created test case so that I was able to fix nasty bug
-+ * Wilfried Weissmann
-+ * spotted bug in dequeue code and helped with fix
-+ * Jiri Fojtasek
-+ * fixed requeue routine
- * and many others. thanks.
- *
-- * $Id: sch_htb.c,v 1.1.1.4 2003/10/14 08:09:35 sparq Exp $
-+ * $Id: sch_htb.c,v 1.25 2003/12/07 11:08:25 devik Exp devik $
- */
- #include <linux/config.h>
- #include <linux/module.h>
-@@ -71,16 +77,12 @@
- #define HTB_HYSTERESIS 1/* whether to use mode hysteresis for speedup */
- #define HTB_QLOCK(S) spin_lock_bh(&(S)->dev->queue_lock)
- #define HTB_QUNLOCK(S) spin_unlock_bh(&(S)->dev->queue_lock)
--#define HTB_VER 0x30007 /* major must be matched with number suplied by TC as version */
-+#define HTB_VER 0x30010 /* major must be matched with number suplied by TC as version */
-
- #if HTB_VER >> 16 != TC_HTB_PROTOVER
- #error "Mismatched sch_htb.c and pkt_sch.h"
- #endif
-
--/* temporary debug defines to be removed after beta stage */
--#define DEVIK_MEND(N)
--#define DEVIK_MSTART(N)
--
- /* debugging support; S is subsystem, these are defined:
- 0 - netlink messages
- 1 - enqueue
-@@ -100,13 +102,16 @@
- from LSB
- */
- #ifdef HTB_DEBUG
--#define HTB_DBG(S,L,FMT,ARG...) if (((q->debug>>(2*S))&3) >= L) \
-+#define HTB_DBG_COND(S,L) (((q->debug>>(2*S))&3) >= L)
-+#define HTB_DBG(S,L,FMT,ARG...) if (HTB_DBG_COND(S,L)) \
- printk(KERN_DEBUG FMT,##ARG)
- #define HTB_CHCL(cl) BUG_TRAP((cl)->magic == HTB_CMAGIC)
- #define HTB_PASSQ q,
- #define HTB_ARGQ struct htb_sched *q,
- #define static
-+#undef __inline__
- #define __inline__
-+#undef inline
- #define inline
- #define HTB_CMAGIC 0xFEFAFEF1
- #define htb_safe_rb_erase(N,R) do { BUG_TRAP((N)->rb_color != -1); \
-@@ -114,6 +119,7 @@
- rb_erase(N,R); \
- (N)->rb_color = -1; } while (0)
- #else
-+#define HTB_DBG_COND(S,L) (0)
- #define HTB_DBG(S,L,FMT,ARG...)
- #define HTB_PASSQ
- #define HTB_ARGQ
-@@ -219,6 +225,9 @@
- /* time of nearest event per level (row) */
- unsigned long near_ev_cache[TC_HTB_MAXDEPTH];
-
-+ /* cached value of jiffies in dequeue */
-+ unsigned long jiffies;
-+
- /* whether we hit non-work conserving class during this dequeue; we use */
- int nwc_hit; /* this to disable mindelay complaint in dequeue */
-
-@@ -297,7 +306,7 @@
- rules in it */
- if (skb->priority == sch->handle)
- return HTB_DIRECT; /* X:0 (direct flow) selected */
-- if ((cl = htb_find(skb->priority,sch)) != NULL)
-+ if ((cl = htb_find(skb->priority,sch)) != NULL && cl->level == 0)
- return cl;
-
- tcf = q->filter_list;
-@@ -338,7 +347,7 @@
- static void htb_debug_dump (struct htb_sched *q)
- {
- int i,p;
-- printk(KERN_DEBUG "htb*g j=%lu\n",jiffies);
-+ printk(KERN_DEBUG "htb*g j=%lu lj=%lu\n",jiffies,q->jiffies);
- /* rows */
- for (i=TC_HTB_MAXDEPTH-1;i>=0;i--) {
- printk(KERN_DEBUG "htb*r%d m=%x",i,q->row_mask[i]);
-@@ -421,26 +430,24 @@
- if ((delay <= 0 || delay > cl->mbuffer) && net_ratelimit())
- printk(KERN_ERR "HTB: suspicious delay in wait_tree d=%ld cl=%X h=%d\n",delay,cl->classid,debug_hint);
- #endif
-- DEVIK_MSTART(9);
-- cl->pq_key = jiffies + PSCHED_US2JIFFIE(delay);
-- if (cl->pq_key == jiffies)
-+ cl->pq_key = q->jiffies + PSCHED_US2JIFFIE(delay);
-+ if (cl->pq_key == q->jiffies)
- cl->pq_key++;
-
- /* update the nearest event cache */
-- if (q->near_ev_cache[cl->level] - cl->pq_key < 0x80000000)
-+ if (time_after(q->near_ev_cache[cl->level], cl->pq_key))
- q->near_ev_cache[cl->level] = cl->pq_key;
-
- while (*p) {
- struct htb_class *c; parent = *p;
- c = rb_entry(parent, struct htb_class, pq_node);
-- if (cl->pq_key - c->pq_key < 0x80000000)
-+ if (time_after_eq(cl->pq_key, c->pq_key))
- p = &parent->rb_right;
- else
- p = &parent->rb_left;
- }
- rb_link_node(&cl->pq_node, parent, p);
- rb_insert_color(&cl->pq_node, &q->wait_pq[cl->level]);
-- DEVIK_MEND(9);
- }
-
- /**
-@@ -453,12 +460,14 @@
- {
- rb_node_t *p;
- if ((*n)->rb_right) {
-+ /* child at right. use it or its leftmost ancestor */
- *n = (*n)->rb_right;
- while ((*n)->rb_left)
- *n = (*n)->rb_left;
- return;
- }
- while ((p = (*n)->rb_parent) != NULL) {
-+ /* if we've arrived from left child then we have next node */
- if (p->rb_left == *n) break;
- *n = p;
- }
-@@ -602,7 +611,7 @@
- long toks;
-
- if ((toks = (cl->ctokens + *diff)) < (
--#ifdef HTB_HYSTERESIS
-+#if HTB_HYSTERESIS
- cl->cmode != HTB_CANT_SEND ? -cl->cbuffer :
- #endif
- 0)) {
-@@ -610,7 +619,7 @@
- return HTB_CANT_SEND;
- }
- if ((toks = (cl->tokens + *diff)) >= (
--#ifdef HTB_HYSTERESIS
-+#if HTB_HYSTERESIS
- cl->cmode == HTB_CAN_SEND ? -cl->buffer :
- #endif
- 0))
-@@ -689,7 +698,6 @@
- struct htb_sched *q = (struct htb_sched *)sch->data;
- struct htb_class *cl = htb_classify(skb,sch);
-
-- DEVIK_MSTART(0);
- if (cl == HTB_DIRECT || !cl) {
- /* enqueue to helper queue */
- if (q->direct_queue.qlen < q->direct_qlen && cl) {
-@@ -698,25 +706,20 @@
- } else {
- kfree_skb (skb);
- sch->stats.drops++;
-- DEVIK_MEND(0);
- return NET_XMIT_DROP;
- }
- } else if (cl->un.leaf.q->enqueue(skb, cl->un.leaf.q) != NET_XMIT_SUCCESS) {
- sch->stats.drops++;
- cl->stats.drops++;
-- DEVIK_MEND(0);
- return NET_XMIT_DROP;
- } else {
- cl->stats.packets++; cl->stats.bytes += skb->len;
-- DEVIK_MSTART(1);
- htb_activate (q,cl);
-- DEVIK_MEND(1);
- }
-
- sch->q.qlen++;
- sch->stats.packets++; sch->stats.bytes += skb->len;
-- HTB_DBG(1,1,"htb_enq_ok cl=%X skb=%p\n",cl?cl->classid:0,skb);
-- DEVIK_MEND(0);
-+ HTB_DBG(1,1,"htb_enq_ok cl=%X skb=%p\n",(cl && cl != HTB_DIRECT)?cl->classid:0,skb);
- return NET_XMIT_SUCCESS;
- }
-
-@@ -725,16 +728,18 @@
- {
- struct htb_sched *q = (struct htb_sched *)sch->data;
- struct htb_class *cl = htb_classify(skb,sch);
-+ struct sk_buff *tskb;
-
- if (cl == HTB_DIRECT || !cl) {
- /* enqueue to helper queue */
- if (q->direct_queue.qlen < q->direct_qlen && cl) {
-- __skb_queue_tail(&q->direct_queue, skb);
-- q->direct_pkts++;
-+ __skb_queue_head(&q->direct_queue, skb);
- } else {
-- kfree_skb (skb);
-- sch->stats.drops++;
-- return NET_XMIT_DROP;
-+ __skb_queue_head(&q->direct_queue, skb);
-+ tskb = __skb_dequeue_tail(&q->direct_queue);
-+ kfree_skb (tskb);
-+ sch->stats.drops++;
-+ return NET_XMIT_CN;
- }
- } else if (cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q) != NET_XMIT_SUCCESS) {
- sch->stats.drops++;
-@@ -744,7 +749,7 @@
- htb_activate (q,cl);
-
- sch->q.qlen++;
-- HTB_DBG(1,1,"htb_req_ok cl=%X skb=%p\n",cl?cl->classid:0,skb);
-+ HTB_DBG(1,1,"htb_req_ok cl=%X skb=%p\n",(cl && cl != HTB_DIRECT)?cl->classid:0,skb);
- return NET_XMIT_SUCCESS;
- }
-
-@@ -819,7 +824,7 @@
- cl->classid, diff,
- (unsigned long long) q->now,
- (unsigned long long) cl->t_c,
-- jiffies);
-+ q->jiffies);
- diff = 1000;
- }
- #endif
-@@ -862,6 +867,7 @@
- *
- * Scans event queue for pending events and applies them. Returns jiffies to
- * next pending event (0 for no event in pq).
-+ * Note: Aplied are events whose have cl->pq_key <= jiffies.
- */
- static long htb_do_events(struct htb_sched *q,int level)
- {
-@@ -876,9 +882,9 @@
- while (p->rb_left) p = p->rb_left;
-
- cl = rb_entry(p, struct htb_class, pq_node);
-- if (cl->pq_key - (jiffies+1) < 0x80000000) {
-- HTB_DBG(8,3,"htb_do_ev_ret delay=%ld\n",cl->pq_key - jiffies);
-- return cl->pq_key - jiffies;
-+ if (time_after(cl->pq_key, q->jiffies)) {
-+ HTB_DBG(8,3,"htb_do_ev_ret delay=%ld\n",cl->pq_key - q->jiffies);
-+ return cl->pq_key - q->jiffies;
- }
- htb_safe_rb_erase(p,q->wait_pq+level);
- diff = PSCHED_TDIFF_SAFE(q->now, cl->t_c, (u32)cl->mbuffer, 0);
-@@ -889,7 +895,7 @@
- cl->classid, diff,
- (unsigned long long) q->now,
- (unsigned long long) cl->t_c,
-- jiffies);
-+ q->jiffies);
- diff = 1000;
- }
- #endif
-@@ -916,6 +922,7 @@
- rb_node_t **pptr;
- } stk[TC_HTB_MAXDEPTH],*sp = stk;
-
-+ BUG_TRAP(tree->rb_node);
- sp->root = tree->rb_node;
- sp->pptr = pptr;
-
-@@ -949,16 +956,36 @@
- htb_dequeue_tree(struct htb_sched *q,int prio,int level)
- {
- struct sk_buff *skb = NULL;
-- //struct htb_sched *q = (struct htb_sched *)sch->data;
- struct htb_class *cl,*start;
- /* look initial class up in the row */
-- DEVIK_MSTART(6);
- start = cl = htb_lookup_leaf (q->row[level]+prio,prio,q->ptr[level]+prio);
-
- do {
-- BUG_TRAP(cl && cl->un.leaf.q->q.qlen); if (!cl) return NULL;
-+next:
-+ BUG_TRAP(cl);
-+ if (!cl) return NULL;
- HTB_DBG(4,1,"htb_deq_tr prio=%d lev=%d cl=%X defic=%d\n",
- prio,level,cl->classid,cl->un.leaf.deficit[level]);
-+
-+ /* class can be empty - it is unlikely but can be true if leaf
-+ qdisc drops packets in enqueue routine or if someone used
-+ graft operation on the leaf since last dequeue;
-+ simply deactivate and skip such class */
-+ if (unlikely(cl->un.leaf.q->q.qlen == 0)) {
-+ struct htb_class *next;
-+ htb_deactivate(q,cl);
-+
-+ /* row/level might become empty */
-+ if ((q->row_mask[level] & (1 << prio)) == 0)
-+ return NULL;
-+
-+ next = htb_lookup_leaf (q->row[level]+prio,
-+ prio,q->ptr[level]+prio);
-+ if (cl == start) /* fix start if we just deleted it */
-+ start = next;
-+ cl = next;
-+ goto next;
-+ }
-
- if (likely((skb = cl->un.leaf.q->dequeue(cl->un.leaf.q)) != NULL))
- break;
-@@ -971,8 +998,6 @@
- cl = htb_lookup_leaf (q->row[level]+prio,prio,q->ptr[level]+prio);
- } while (cl != start);
-
-- DEVIK_MEND(6);
-- DEVIK_MSTART(7);
- if (likely(skb != NULL)) {
- if ((cl->un.leaf.deficit[level] -= skb->len) < 0) {
- HTB_DBG(4,2,"htb_next_cl oldptr=%p quant_add=%d\n",
-@@ -984,11 +1009,8 @@
- gives us slightly better performance */
- if (!cl->un.leaf.q->q.qlen)
- htb_deactivate (q,cl);
-- DEVIK_MSTART(8);
- htb_charge_class (q,cl,level,skb->len);
-- DEVIK_MEND(8);
- }
-- DEVIK_MEND(7);
- return skb;
- }
-
-@@ -1002,9 +1024,8 @@
- printk(KERN_INFO "HTB delay %ld > 5sec\n", delay);
- delay = 5*HZ;
- }
-- del_timer(&q->timer);
-- q->timer.expires = jiffies + delay;
-- add_timer(&q->timer);
-+ /* why don't use jiffies here ? because expires can be in past */
-+ mod_timer(&q->timer, q->jiffies + delay);
- sch->flags |= TCQ_F_THROTTLED;
- sch->stats.overlimits++;
- HTB_DBG(3,1,"htb_deq t_delay=%ld\n",delay);
-@@ -1016,7 +1037,11 @@
- struct htb_sched *q = (struct htb_sched *)sch->data;
- int level;
- long min_delay;
-+#ifdef HTB_DEBUG
-+ int evs_used = 0;
-+#endif
-
-+ q->jiffies = jiffies;
- HTB_DBG(3,1,"htb_deq dircnt=%d qlen=%d\n",skb_queue_len(&q->direct_queue),
- sch->q.qlen);
-
-@@ -1027,27 +1052,26 @@
- return skb;
- }
-
-- DEVIK_MSTART(2);
- if (!sch->q.qlen) goto fin;
- PSCHED_GET_TIME(q->now);
-
-- min_delay = HZ*5;
-+ min_delay = LONG_MAX;
- q->nwc_hit = 0;
- for (level = 0; level < TC_HTB_MAXDEPTH; level++) {
- /* common case optimization - skip event handler quickly */
- int m;
- long delay;
-- DEVIK_MSTART(3);
-- if (jiffies - q->near_ev_cache[level] < 0x80000000 || 0) {
-+ if (time_after_eq(q->jiffies, q->near_ev_cache[level])) {
- delay = htb_do_events(q,level);
-- q->near_ev_cache[level] += delay ? delay : HZ;
-+ q->near_ev_cache[level] = q->jiffies + (delay ? delay : HZ);
-+#ifdef HTB_DEBUG
-+ evs_used++;
-+#endif
- } else
-- delay = q->near_ev_cache[level] - jiffies;
-+ delay = q->near_ev_cache[level] - q->jiffies;
-
- if (delay && min_delay > delay)
- min_delay = delay;
-- DEVIK_MEND(3);
-- DEVIK_MSTART(5);
- m = ~q->row_mask[level];
- while (m != (int)(-1)) {
- int prio = ffz (m);
-@@ -1056,29 +1080,29 @@
- if (likely(skb != NULL)) {
- sch->q.qlen--;
- sch->flags &= ~TCQ_F_THROTTLED;
-- DEVIK_MEND(5);
- goto fin;
- }
- }
-- DEVIK_MEND(5);
- }
-- DEVIK_MSTART(4);
- #ifdef HTB_DEBUG
-- if (!q->nwc_hit && min_delay >= 5*HZ && net_ratelimit()) {
-- printk(KERN_ERR "HTB: mindelay=%ld, report it please !\n",min_delay);
-- htb_debug_dump(q);
-+ if (!q->nwc_hit && min_delay >= 10*HZ && net_ratelimit()) {
-+ if (min_delay == LONG_MAX) {
-+ printk(KERN_ERR "HTB: dequeue bug (%d,%lu,%lu), report it please !\n",
-+ evs_used,q->jiffies,jiffies);
-+ htb_debug_dump(q);
-+ } else
-+ printk(KERN_WARNING "HTB: mindelay=%ld, some class has "
-+ "too small rate\n",min_delay);
- }
- #endif
-- htb_delay_by (sch,min_delay);
-- DEVIK_MEND(4);
-+ htb_delay_by (sch,min_delay > 5*HZ ? 5*HZ : min_delay);
- fin:
-- HTB_DBG(3,1,"htb_deq_end %s j=%lu skb=%p\n",sch->dev->name,jiffies,skb);
-- DEVIK_MEND(2);
-+ HTB_DBG(3,1,"htb_deq_end %s j=%lu skb=%p\n",sch->dev->name,q->jiffies,skb);
- return skb;
- }
-
- /* try to drop from each class (by prio) until one succeed */
--static int htb_drop(struct Qdisc* sch)
-+static unsigned int htb_drop(struct Qdisc* sch)
- {
- struct htb_sched *q = (struct htb_sched *)sch->data;
- int prio;
-@@ -1086,14 +1110,15 @@
- for (prio = TC_HTB_NUMPRIO - 1; prio >= 0; prio--) {
- struct list_head *p;
- list_for_each (p,q->drops+prio) {
-- struct htb_class *cl = list_entry(p,struct htb_class,
-- un.leaf.drop_list);
-+ struct htb_class *cl = list_entry(p, struct htb_class,
-+ un.leaf.drop_list);
-+ unsigned int len;
- if (cl->un.leaf.q->ops->drop &&
-- cl->un.leaf.q->ops->drop(cl->un.leaf.q)) {
-+ (len = cl->un.leaf.q->ops->drop(cl->un.leaf.q))) {
- sch->q.qlen--;
- if (!cl->un.leaf.q->q.qlen)
- htb_deactivate (q,cl);
-- return 1;
-+ return len;
- }
- }
- }
-@@ -1208,7 +1233,8 @@
- gopt.direct_pkts = q->direct_pkts;
-
- #ifdef HTB_DEBUG
-- htb_debug_dump(q);
-+ if (HTB_DBG_COND(0,2))
-+ htb_debug_dump(q);
- #endif
- gopt.version = HTB_VER;
- gopt.rate2quantum = q->rate2quantum;
-@@ -1289,6 +1315,9 @@
- return -ENOBUFS;
- sch_tree_lock(sch);
- if ((*old = xchg(&cl->un.leaf.q, new)) != NULL) {
-+ if (cl->prio_activity)
-+ htb_deactivate ((struct htb_sched*)sch->data,cl);
-+
- /* TODO: is it correct ? Why CBQ doesn't do it ? */
- sch->q.qlen -= (*old)->q.qlen;
- qdisc_reset(*old);
-@@ -1323,7 +1352,7 @@
-
- while ((tp = *fl) != NULL) {
- *fl = tp->next;
-- tp->ops->destroy(tp);
-+ tcf_destroy(tp);
- }
- }
-
-@@ -1371,11 +1400,16 @@
- #ifdef HTB_RATECM
- del_timer_sync (&q->rttim);
- #endif
-+ /* This line used to be after htb_destroy_class call below
-+ and surprisingly it worked in 2.4. But it must precede it
-+ because filter need its target class alive to be able to call
-+ unbind_filter on it (without Oops). */
-+ htb_destroy_filters(&q->filter_list);
-+
- while (!list_empty(&q->root))
- htb_destroy_class (sch,list_entry(q->root.next,
- struct htb_class,sibling));
-
-- htb_destroy_filters(&q->filter_list);
- __skb_queue_purge(&q->direct_queue);
- MOD_DEC_USE_COUNT;
- }
-@@ -1438,12 +1472,13 @@
- parent = parentid == TC_H_ROOT ? NULL : htb_find (parentid,sch);
-
- hopt = RTA_DATA(tb[TCA_HTB_PARMS-1]);
-- HTB_DBG(0,1,"htb_chg cl=%p, clid=%X, opt/prio=%d, rate=%u, buff=%d, quant=%d\n", cl,cl?cl->classid:0,(int)hopt->prio,hopt->rate.rate,hopt->buffer,hopt->quantum);
-+ HTB_DBG(0,1,"htb_chg cl=%p(%X), clid=%X, parid=%X, opt/prio=%d, rate=%u, buff=%d, quant=%d\n", cl,cl?cl->classid:0,classid,parentid,(int)hopt->prio,hopt->rate.rate,hopt->buffer,hopt->quantum);
- rtab = qdisc_get_rtab(&hopt->rate, tb[TCA_HTB_RTAB-1]);
- ctab = qdisc_get_rtab(&hopt->ceil, tb[TCA_HTB_CTAB-1]);
- if (!rtab || !ctab) goto failure;
-
- if (!cl) { /* new class */
-+ struct Qdisc *new_q;
- /* check for valid classid */
- if (!classid || TC_H_MAJ(classid^sch->handle) || htb_find(classid,sch))
- goto failure;
-@@ -1467,6 +1502,10 @@
- cl->magic = HTB_CMAGIC;
- #endif
-
-+ /* create leaf qdisc early because it uses kmalloc(GFP_KERNEL)
-+ so that can't be used inside of sch_tree_lock
-+ -- thanks to Karlis Peisenieks */
-+ new_q = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops);
- sch_tree_lock(sch);
- if (parent && !parent->level) {
- /* turn parent into inner node */
-@@ -1485,8 +1524,7 @@
- memset (&parent->un.inner,0,sizeof(parent->un.inner));
- }
- /* leaf (we) needs elementary qdisc */
-- if (!(cl->un.leaf.q = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops)))
-- cl->un.leaf.q = &noop_qdisc;
-+ cl->un.leaf.q = new_q ? new_q : &noop_qdisc;
-
- cl->classid = classid; cl->parent = parent;
-
-@@ -1514,11 +1552,11 @@
- if (!cl->level) {
- cl->un.leaf.quantum = rtab->rate.rate / q->rate2quantum;
- if (!hopt->quantum && cl->un.leaf.quantum < 1000) {
-- printk(KERN_WARNING "HTB: quantum of class %X is small. Consider r2q change.", cl->classid);
-+ printk(KERN_WARNING "HTB: quantum of class %X is small. Consider r2q change.\n", cl->classid);
- cl->un.leaf.quantum = 1000;
- }
- if (!hopt->quantum && cl->un.leaf.quantum > 200000) {
-- printk(KERN_WARNING "HTB: quantum of class %X is big. Consider r2q change.", cl->classid);
-+ printk(KERN_WARNING "HTB: quantum of class %X is big. Consider r2q change.\n", cl->classid);
- cl->un.leaf.quantum = 200000;
- }
- if (hopt->quantum)
---- linux/include/net/pkt_cls.h 2003-07-04 01:12:28.000000000 -0700
-+++ linux.2.4.26/include/net/pkt_cls.h 2004-05-10 22:21:40.000000000 -0700
-@@ -77,7 +77,11 @@
- return -1;
- }
-
--
-+static inline void tcf_destroy(struct tcf_proto *tp)
-+{
-+ tp->ops->destroy(tp);
-+ kfree(tp);
-+}
-
- extern int register_tcf_proto_ops(struct tcf_proto_ops *ops);
- extern int unregister_tcf_proto_ops(struct tcf_proto_ops *ops);
+++ /dev/null
-diff -Nurb linux.orig/Makefile linux/Makefile
---- linux.orig/Makefile 2003-10-14 04:00:10.000000000 -0400
-+++ linux/Makefile 2004-05-25 21:12:24.000000000 -0400
-@@ -17,7 +17,7 @@
- FINDHPATH = $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net $(HPATH)/math-emu
-
- HOSTCC = gcc
--HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-+HOSTCFLAGS = -Wall -Wstrict-prototypes -Os -fomit-frame-pointer
-
- CROSS_COMPILE =
-
-@@ -88,7 +88,7 @@
-
- CPPFLAGS := -D__KERNEL__ -I$(HPATH)
-
--CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common
-
- # Turn on -pg to instrument the kernel with calls to mcount().
-diff -Nurb linux.orig/arch/mips/brcm-boards/bcm947xx/setup.c linux/arch/mips/brcm-boards/bcm947xx/setup.c
---- linux.orig/arch/mips/brcm-boards/bcm947xx/setup.c 2003-11-11 09:08:46.000000000 -0500
-+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2004-05-25 21:12:24.000000000 -0400
-@@ -27,6 +27,7 @@
- #include <linux/ext2_fs.h>
- #include <linux/romfs_fs.h>
- #include <linux/cramfs_fs.h>
-+#include <linux/squashfs_fs.h>
- #endif
-
- #include <typedefs.h>
-@@ -160,37 +161,38 @@
- #ifdef CONFIG_MTD_PARTITIONS
-
- static struct mtd_partition bcm947xx_parts[] = {
-- { name: "pmon", offset: 0, size: 0, /*mask_flags: MTD_WRITEABLE,*/ },
-+ { name: "pmon", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
- { name: "linux", offset: 0, size: 0, },
- { name: "rootfs", offset: 0, size: 0, /*mask_flags: MTD_WRITEABLE,*/ },
- { name: "nvram", offset: 0, size: 0, },
-+ { name: "OpenWrt", offset: 0, size: 0, },
- { name: NULL, },
- };
-
--struct mtd_partition * __init
--init_mtd_partitions(struct mtd_info *mtd, size_t size)
-+
-+static int __init
-+find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
- {
-- struct minix_super_block *minixsb;
-- struct ext2_super_block *ext2sb;
-- struct romfs_super_block *romfsb;
- struct cramfs_super *cramfsb;
-+ struct squashfs_super_block *squashfsb;
- struct trx_header *trx;
-+
- unsigned char buf[512];
- int off;
- size_t len;
-
-- minixsb = (struct minix_super_block *) buf;
-- ext2sb = (struct ext2_super_block *) buf;
-- romfsb = (struct romfs_super_block *) buf;
- cramfsb = (struct cramfs_super *) buf;
-+ squashfsb = (struct squashfs_super_block *) buf;
- trx = (struct trx_header *) buf;
-
-- /* Look at every 64 KB boundary */
-- for (off = 0; off < size; off += (64 * 1024)) {
-+ part->offset = 0;
-+ part->size = 0;
-+
-+ for (off = 0; off < size; off += mtd->erasesize) {
- memset(buf, 0xe5, sizeof(buf));
-
- /*
-- * Read block 0 to test for romfs and cramfs superblock
-+ * Read block 0 to test for cramfs superblock
- */
- if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
- len != sizeof(buf))
-@@ -198,75 +200,105 @@
-
- /* Try looking at TRX header for rootfs offset */
- if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
-- bcm947xx_parts[1].offset = off;
- if (le32_to_cpu(trx->offsets[1]) > off)
- off = le32_to_cpu(trx->offsets[1]);
- continue;
- }
-
-- /* romfs is at block zero too */
-- if (romfsb->word0 == ROMSB_WORD0 &&
-- romfsb->word1 == ROMSB_WORD1) {
-- printk(KERN_NOTICE
-- "%s: romfs filesystem found at block %d\n",
-- mtd->name, off / BLOCK_SIZE);
-- goto done;
-- }
--
-- /* so is cramfs */
-+ /* need to find cramfs */
- if (cramfsb->magic == CRAMFS_MAGIC) {
- printk(KERN_NOTICE
- "%s: cramfs filesystem found at block %d\n",
- mtd->name, off / BLOCK_SIZE);
-- goto done;
-- }
-
-- /*
-- * Read block 1 to test for minix and ext2 superblock
-- */
-- if (MTD_READ(mtd, off + BLOCK_SIZE, sizeof(buf), &len, buf) ||
-- len != sizeof(buf))
-- continue;
--
-- /* Try minix */
-- if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
-- minixsb->s_magic == MINIX_SUPER_MAGIC2) {
-- printk(KERN_NOTICE
-- "%s: Minix filesystem found at block %d\n",
-- mtd->name, off / BLOCK_SIZE);
-+ part->size = cramfsb->size;
- goto done;
- }
-
-- /* Try ext2 */
-- if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) {
-+ /* or squashfs */
-+ if (squashfsb->s_magic == SQUASHFS_MAGIC) {
- printk(KERN_NOTICE
-- "%s: ext2 filesystem found at block %d\n",
-+ "%s: squashfs filesystem found at block %d\n",
- mtd->name, off / BLOCK_SIZE);
-+ part->size = squashfsb->bytes_used+2048;
- goto done;
- }
-- }
-
-+ }
- printk(KERN_NOTICE
-- "%s: Couldn't find valid ROM disk image\n",
-+ "%s: Couldn't find valid cramfs image\n",
- mtd->name);
-+ return -1;
-+
-+done:
-+ part->offset = off;
-+ return 0;
-+}
-+
-+
-+struct mtd_partition * __init
-+init_mtd_partitions(struct mtd_info *mtd, size_t size)
-+{
-+
-+ bcm947xx_parts[0].offset=0;
-+ bcm947xx_parts[0].size=256*1024;
-
-- done:
- /* Find and size nvram */
- bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
- bcm947xx_parts[3].size = size - bcm947xx_parts[3].offset;
-
- /* Find and size rootfs */
-- if (off < size) {
-- bcm947xx_parts[2].offset = off;
-- bcm947xx_parts[2].size = bcm947xx_parts[3].offset - bcm947xx_parts[2].offset;
-- }
-+ //if (off < size) {
-+ // bcm947xx_parts[2].offset = off;
-+ // bcm947xx_parts[2].size = bcm947xx_parts[3].offset - bcm947xx_parts[2].offset;
-+ //}
-+
-+ /* Find and size rootfs */
-+ find_root(mtd,size,&bcm947xx_parts[2]);
-+
-+
-
- /* Size linux (kernel and rootfs) */
-+ bcm947xx_parts[1].offset = bcm947xx_parts[0].size;
- bcm947xx_parts[1].size = bcm947xx_parts[3].offset - bcm947xx_parts[1].offset;
-
-+
-+
-+ /* calculate leftover flash, and assign it to the jffs partition */
-+ size_t spot;
-+ size_t len;
-+ size_t mask;
-+ // get the offset to the end of the root_fs
-+ spot=bcm947xx_parts[2].offset+bcm947xx_parts[2].size;
-+ // round it up to an erase size boundary
-+ spot+=mtd->erasesize-1;
-+ // mask the number to the boundary
-+ mask=mtd->erasesize;
-+ mask=mask-1;
-+ mask=mask^0xffffffff;
-+ spot&=mask;
-+ // length = flashsize - start position - nvram size
-+ len=size-spot;
-+ len=len-bcm947xx_parts[3].size;
-+
-+
-+ bcm947xx_parts[4].offset = spot;
-+ bcm947xx_parts[4].size = len;
-+
-+
-+
-+
- /* Size pmon */
- bcm947xx_parts[0].size = bcm947xx_parts[1].offset - bcm947xx_parts[0].offset;
-
-+ //int x;
-+ //for(x=0; x<5; x++) {
-+ // printk(KERN_NOTICE
-+ // "Partition %d mask_flags %08x\n",
-+ // x,bcm947xx_parts[x].mask_flags);
-+ //}
-+
-+
- return bcm947xx_parts;
- }
-
-diff -Nurb linux.orig/drivers/mtd/maps/bcm947xx-flash.c linux/drivers/mtd/maps/bcm947xx-flash.c
---- linux.orig/drivers/mtd/maps/bcm947xx-flash.c 2003-11-08 04:35:52.000000000 -0500
-+++ linux/drivers/mtd/maps/bcm947xx-flash.c 2004-05-25 21:12:24.000000000 -0400
-@@ -82,7 +82,21 @@
-
- void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
- {
-+ //memcpy_fromio(to, map->map_priv_1 + from, len);
-+ if (len==1) {
- memcpy_fromio(to, map->map_priv_1 + from, len);
-+ } else {
-+ int i;
-+ u16 *dest = (u16 *) to;
-+ u16 *src = (u16 *) (map->map_priv_1 + from);
-+
-+ for (i = 0; i < (len / 2); i++) {
-+ dest[i] = src[i];
-+ }
-+
-+ if (len & 1)
-+ *((u8 *)dest+len-1) = src[i] & 0xff;
-+ }
- }
-
- void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr)
-diff -Nurb linux.orig/drivers/net/Makefile linux/drivers/net/Makefile
---- linux.orig/drivers/net/Makefile 2004-02-12 21:35:15.000000000 -0500
-+++ linux/drivers/net/Makefile 2004-05-25 21:12:24.000000000 -0400
-@@ -25,7 +25,7 @@
- list-multi := rcpci.o
- rcpci-objs := rcpci45.o rclanmtl.o
-
--subdir-m += mac
-+# subdir-m += mac
- subdir-m += diag
-
- ifeq ($(CONFIG_HW_QOS),y)
-diff -Nurb linux.orig/fs/Config.in linux/fs/Config.in
---- linux.orig/fs/Config.in 2003-07-04 04:12:05.000000000 -0400
-+++ linux/fs/Config.in 2004-05-25 21:13:03.000000000 -0400
-@@ -47,6 +47,7 @@
- int 'JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0
- fi
- tristate 'Compressed ROM file system support' CONFIG_CRAMFS
-+tristate 'Squashed file system support' CONFIG_SQUASHFS
- bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS
- define_bool CONFIG_RAMFS y
-
-diff -Nurb linux.orig/fs/Makefile linux/fs/Makefile
---- linux.orig/fs/Makefile 2003-07-04 04:12:05.000000000 -0400
-+++ linux/fs/Makefile 2004-05-25 21:13:03.000000000 -0400
-@@ -68,6 +68,7 @@
- subdir-$(CONFIG_SUN_OPENPROMFS) += openpromfs
- subdir-$(CONFIG_BEFS_FS) += befs
- subdir-$(CONFIG_JFS_FS) += jfs
-+subdir-$(CONFIG_SQUASHFS) += squashfs
-
-
- obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
-diff -Nurb linux.orig/fs/squashfs/Makefile linux/fs/squashfs/Makefile
---- linux.orig/fs/squashfs/Makefile 1969-12-31 19:00:00.000000000 -0500
-+++ linux/fs/squashfs/Makefile 2004-05-25 21:13:03.000000000 -0400
-@@ -0,0 +1,11 @@
-+#
-+# Makefile for the linux squashfs routines.
-+#
-+
-+O_TARGET := squashfs.o
-+
-+obj-y := inode.o
-+
-+obj-m := $(O_TARGET)
-+
-+include $(TOPDIR)/Rules.make
-diff -Nurb linux.orig/fs/squashfs/inode.c linux/fs/squashfs/inode.c
---- linux.orig/fs/squashfs/inode.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux/fs/squashfs/inode.c 2004-05-25 21:13:03.000000000 -0400
-@@ -0,0 +1,1515 @@
-+/*
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * Copyright (c) 2002, 2003, 2004 Phillip Lougher <plougher@users.sourceforge.net>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ * Squashfs - a compressed read only filesystem for Linux
-+ *
-+ * inode.c
-+ */
-+
-+#define SQUASHFS_1_0_COMPATIBILITY
-+
-+#include <linux/types.h>
-+#include <linux/squashfs_fs.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/locks.h>
-+#include <linux/init.h>
-+#include <linux/dcache.h>
-+#include <asm/uaccess.h>
-+#include <linux/wait.h>
-+#include <asm/semaphore.h>
-+#include <linux/zlib.h>
-+#include <linux/blkdev.h>
-+#include <linux/vmalloc.h>
-+
-+#ifdef SQUASHFS_TRACE
-+#define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args)
-+#else
-+#define TRACE(s, args...) {}
-+#endif
-+
-+#define ERROR(s, args...) printk(KERN_ERR "SQUASHFS error: "s, ## args)
-+
-+#define SERROR(s, args...) if(!silent) printk(KERN_ERR "SQUASHFS error: "s, ## args)
-+#define WARNING(s, args...) printk(KERN_WARNING "SQUASHFS: "s, ## args)
-+
-+static struct super_block *squashfs_read_super(struct super_block *, void *, int);
-+static void squashfs_put_super(struct super_block *);
-+static int squashfs_statfs(struct super_block *, struct statfs *);
-+static int squashfs_symlink_readpage(struct file *file, struct page *page);
-+static int squashfs_readpage(struct file *file, struct page *page);
-+static int squashfs_readpage4K(struct file *file, struct page *page);
-+static int squashfs_readdir(struct file *, void *, filldir_t);
-+static struct dentry *squashfs_lookup(struct inode *, struct dentry *);
-+static unsigned int read_data(struct super_block *s, char *buffer,
-+ unsigned int index, unsigned int length, int, unsigned int *next_index);
-+static int squashfs_get_cached_block(struct super_block *s, char *buffer,
-+ unsigned int block, unsigned int offset, int length,
-+ unsigned int *next_block, unsigned int *next_offset);
-+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode inode);
-+static unsigned int read_blocklist(struct inode *inode, int index, int readahead_blks,
-+ char *block_list, char **block_p, unsigned int *bsize);
-+static void squashfs_put_super(struct super_block *s);
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+static int squashfs_readpage_lessthan4K(struct file *file, struct page *page);
-+static struct inode *squashfs_iget_1(struct super_block *s, squashfs_inode inode);
-+static unsigned int read_blocklist_1(struct inode *inode, int index, int readahead_blks,
-+ char *block_list, char **block_p, unsigned int *bsize);
-+#endif
-+
-+DECLARE_MUTEX(read_data_mutex);
-+
-+static z_stream stream;
-+
-+static DECLARE_FSTYPE_DEV(squashfs_fs_type, "squashfs", squashfs_read_super);
-+
-+static unsigned char squashfs_filetype_table[] = {
-+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
-+};
-+
-+static struct super_operations squashfs_ops = {
-+ statfs: squashfs_statfs,
-+ put_super: squashfs_put_super,
-+};
-+
-+static struct address_space_operations squashfs_symlink_aops = {
-+ readpage: squashfs_symlink_readpage
-+};
-+
-+static struct address_space_operations squashfs_aops = {
-+ readpage: squashfs_readpage
-+};
-+
-+static struct address_space_operations squashfs_aops_4K = {
-+ readpage: squashfs_readpage4K
-+};
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+static struct address_space_operations squashfs_aops_lessthan4K = {
-+ readpage: squashfs_readpage_lessthan4K
-+};
-+#endif
-+
-+static struct file_operations squashfs_dir_ops = {
-+ read: generic_read_dir,
-+ readdir: squashfs_readdir
-+};
-+
-+static struct inode_operations squashfs_dir_inode_ops = {
-+ lookup: squashfs_lookup
-+};
-+
-+
-+static unsigned int read_data(struct super_block *s, char *buffer,
-+ unsigned int index, unsigned int length, int datablock, unsigned int *next_index)
-+{
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+ struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >> msBlk->devblksize_log2) + 2];
-+ unsigned int offset = index & ((1 << msBlk->devblksize_log2) - 1);
-+ unsigned int cur_index = index >> msBlk->devblksize_log2;
-+ int bytes, avail_bytes, b, k;
-+ char *c_buffer;
-+ unsigned int compressed;
-+ unsigned int c_byte = length;
-+
-+ if(c_byte) {
-+ bytes = msBlk->devblksize - offset;
-+ if(datablock) {
-+ c_buffer = (compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte)) ? msBlk->read_data : buffer;
-+ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
-+ } else {
-+ c_buffer = (compressed = SQUASHFS_COMPRESSED(c_byte)) ? msBlk->read_data : buffer;
-+ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
-+ }
-+
-+ TRACE("Block @ 0x%x, %scompressed size %d\n", index, compressed ? "" : "un", (unsigned int) c_byte);
-+
-+ if(!(bh[0] = sb_getblk(s, cur_index)))
-+ goto block_release;
-+ for(b = 1; bytes < c_byte; b++) {
-+ if(!(bh[b] = sb_getblk(s, ++cur_index)))
-+ goto block_release;
-+ bytes += msBlk->devblksize;
-+ }
-+ ll_rw_block(READ, b, bh);
-+ } else {
-+ unsigned short temp;
-+ if(!(bh[0] = sb_bread(s, cur_index)))
-+ goto read_failure;
-+
-+ if(msBlk->devblksize - offset == 1) {
-+ if(msBlk->swap)
-+ ((unsigned char *) &temp)[1] = *((unsigned char *) (bh[0]->b_data + offset));
-+ else
-+ ((unsigned char *) &temp)[0] = *((unsigned char *) (bh[0]->b_data + offset));
-+ brelse(bh[0]);
-+ if(!(bh[0] = sb_bread(s, ++cur_index)))
-+ goto read_failure;
-+ if(msBlk->swap)
-+ ((unsigned char *) &temp)[0] = *((unsigned char *) bh[0]->b_data);
-+ else
-+ ((unsigned char *) &temp)[1] = *((unsigned char *) bh[0]->b_data);
-+ c_byte = temp;
-+ offset = 1;
-+ }
-+ else {
-+ if(msBlk->swap) {
-+ unsigned short temp;
-+ ((unsigned char *) &temp)[1] = *((unsigned char *) (bh[0]->b_data + offset));
-+ ((unsigned char *) &temp)[0] = *((unsigned char *) (bh[0]->b_data + offset + 1));
-+ c_byte = temp;
-+ } else
-+ c_byte = *((unsigned short *) (bh[0]->b_data + offset));
-+ offset += 2;
-+ }
-+ if(SQUASHFS_CHECK_DATA(msBlk->sBlk.flags)) {
-+ if(offset == msBlk->devblksize) {
-+ brelse(bh[0]);
-+ if(!(bh[0] = sb_bread(s, ++cur_index)))
-+ goto read_failure;
-+ offset = 0;
-+ }
-+ if(*((unsigned char *) (bh[0]->b_data + offset)) != SQUASHFS_MARKER_BYTE) {
-+ ERROR("Metadata block marker corrupt @ %x\n", index);
-+ brelse(bh[0]);
-+ return 0;
-+ }
-+ offset ++;
-+ }
-+
-+ bytes = msBlk->devblksize - offset;
-+ if(datablock) {
-+ c_buffer = (compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte)) ? msBlk->read_data : buffer;
-+ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
-+ } else {
-+ c_buffer = (compressed = SQUASHFS_COMPRESSED(c_byte)) ? msBlk->read_data : buffer;
-+ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
-+ }
-+
-+ TRACE("Block @ 0x%x, %scompressed size %d\n", index, compressed ? "" : "un", (unsigned int) c_byte);
-+
-+ for(b = 1; bytes < c_byte; b++) {
-+ if(!(bh[b] = sb_getblk(s, ++cur_index)))
-+ goto block_release;
-+ bytes += msBlk->devblksize;
-+ }
-+ ll_rw_block(READ, b - 1, bh + 1);
-+ }
-+
-+ if(compressed)
-+ down(&read_data_mutex);
-+
-+ for(bytes = 0, k = 0; k < b; k++) {
-+ avail_bytes = (c_byte - bytes) > (msBlk->devblksize - offset) ? msBlk->devblksize - offset : c_byte - bytes;
-+ wait_on_buffer(bh[k]);
-+ memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes);
-+ bytes += avail_bytes;
-+ offset = 0;
-+ brelse(bh[k]);
-+ }
-+
-+ /*
-+ * uncompress block
-+ */
-+ if(compressed) {
-+ int zlib_err;
-+
-+ stream.next_in = c_buffer;
-+ stream.avail_in = c_byte;
-+ stream.next_out = buffer;
-+ stream.avail_out = msBlk->read_size;
-+ if(((zlib_err = zlib_inflateInit(&stream)) != Z_OK) ||
-+ ((zlib_err = zlib_inflate(&stream, Z_FINISH)) != Z_STREAM_END) ||
-+ ((zlib_err = zlib_inflateEnd(&stream)) != Z_OK)) {
-+ ERROR("zlib_fs returned unexpected result 0x%x\n", zlib_err);
-+ bytes = 0;
-+ } else
-+ bytes = stream.total_out;
-+ up(&read_data_mutex);
-+ }
-+
-+ if(next_index)
-+ *next_index = index + c_byte + (length ? 0 : (SQUASHFS_CHECK_DATA(msBlk->sBlk.flags) ? 3 : 2));
-+
-+ return bytes;
-+
-+block_release:
-+ while(--b >= 0) brelse(bh[b]);
-+
-+read_failure:
-+ ERROR("sb_bread failed reading block 0x%x\n", cur_index);
-+ return 0;
-+}
-+
-+
-+static int squashfs_get_cached_block(struct super_block *s, char *buffer,
-+ unsigned int block, unsigned int offset, int length,
-+ unsigned int *next_block, unsigned int *next_offset)
-+{
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+ int n, i, bytes, return_length = length;
-+ unsigned int next_index;
-+
-+ TRACE("Entered squashfs_get_cached_block [%x:%x]\n", block, offset);
-+
-+ for(;;) {
-+ for(i = 0; i < SQUASHFS_CACHED_BLKS; i++)
-+ if(msBlk->block_cache[i].block == block)
-+ break;
-+
-+ down(&msBlk->block_cache_mutex);
-+ if(i == SQUASHFS_CACHED_BLKS) {
-+ /* read inode header block */
-+ for(i = msBlk->next_cache, n = SQUASHFS_CACHED_BLKS; n ; n --, i = (i + 1) % SQUASHFS_CACHED_BLKS)
-+ if(msBlk->block_cache[i].block != SQUASHFS_USED_BLK)
-+ break;
-+ if(n == 0) {
-+ up(&msBlk->block_cache_mutex);
-+ sleep_on(&msBlk->waitq);
-+ continue;
-+ }
-+ msBlk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS;
-+
-+ if(msBlk->block_cache[i].block == SQUASHFS_INVALID_BLK) {
-+ if(!(msBlk->block_cache[i].data = (unsigned char *)
-+ kmalloc(SQUASHFS_METADATA_SIZE, GFP_KERNEL))) {
-+ ERROR("Failed to allocate cache block\n");
-+ up(&msBlk->block_cache_mutex);
-+ return 0;
-+ }
-+ }
-+
-+ msBlk->block_cache[i].block = SQUASHFS_USED_BLK;
-+ up(&msBlk->block_cache_mutex);
-+ if(!(msBlk->block_cache[i].length = read_data(s, msBlk->block_cache[i].data, block, 0, 0,
-+ &next_index))) {
-+ ERROR("Unable to read cache block [%x:%x]\n", block, offset);
-+ return 0;
-+ }
-+ down(&msBlk->block_cache_mutex);
-+ wake_up(&msBlk->waitq);
-+ msBlk->block_cache[i].block = block;
-+ msBlk->block_cache[i].next_index = next_index;
-+ TRACE("Read cache block [%x:%x]\n", block, offset);
-+ }
-+
-+ if(msBlk->block_cache[i].block != block) {
-+ up(&msBlk->block_cache_mutex);
-+ continue;
-+ }
-+
-+ if((bytes = msBlk->block_cache[i].length - offset) >= length) {
-+ if(buffer)
-+ memcpy(buffer, msBlk->block_cache[i].data + offset, length);
-+ if(msBlk->block_cache[i].length - offset == length) {
-+ *next_block = msBlk->block_cache[i].next_index;
-+ *next_offset = 0;
-+ } else {
-+ *next_block = block;
-+ *next_offset = offset + length;
-+ }
-+
-+ up(&msBlk->block_cache_mutex);
-+ return return_length;
-+ } else {
-+ if(buffer) {
-+ memcpy(buffer, msBlk->block_cache[i].data + offset, bytes);
-+ buffer += bytes;
-+ }
-+ block = msBlk->block_cache[i].next_index;
-+ up(&msBlk->block_cache_mutex);
-+ length -= bytes;
-+ offset = 0;
-+ }
-+ }
-+}
-+
-+
-+static int get_fragment_location(struct super_block *s, unsigned int fragment, unsigned int *fragment_start_block, unsigned int *fragment_size)
-+{
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+ unsigned int start_block = msBlk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)];
-+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment);
-+ squashfs_fragment_entry fragment_entry;
-+
-+ if(msBlk->swap) {
-+ squashfs_fragment_entry sfragment_entry;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sfragment_entry, start_block, offset,
-+ sizeof(sfragment_entry), &start_block, &offset))
-+ return 0;
-+ SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &fragment_entry, start_block, offset,
-+ sizeof(fragment_entry), &start_block, &offset))
-+ return 0;
-+
-+ *fragment_start_block = fragment_entry.start_block;
-+ *fragment_size = fragment_entry.size;
-+
-+ return 1;
-+}
-+
-+
-+void release_cached_fragment(squashfs_sb_info *msBlk, struct squashfs_fragment_cache *fragment)
-+{
-+ down(&msBlk->fragment_mutex);
-+ fragment->locked --;
-+ wake_up(&msBlk->fragment_wait_queue);
-+ up(&msBlk->fragment_mutex);
-+}
-+
-+
-+struct squashfs_fragment_cache *get_cached_fragment(struct super_block *s, unsigned int start_block, int length)
-+{
-+ int i, n;
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+
-+ for(;;) {
-+ down(&msBlk->fragment_mutex);
-+ for(i = 0; i < SQUASHFS_CACHED_FRAGMENTS && msBlk->fragment[i].block != start_block; i++);
-+ if(i == SQUASHFS_CACHED_FRAGMENTS) {
-+ for(i = msBlk->next_fragment, n = SQUASHFS_CACHED_FRAGMENTS;
-+ n && msBlk->fragment[i].locked; n--, i = (i + 1) % SQUASHFS_CACHED_FRAGMENTS);
-+
-+ if(n == 0) {
-+ up(&msBlk->fragment_mutex);
-+ sleep_on(&msBlk->fragment_wait_queue);
-+ continue;
-+ }
-+ msBlk->next_fragment = (msBlk->next_fragment + 1) % SQUASHFS_CACHED_FRAGMENTS;
-+
-+ if(msBlk->fragment[i].data == NULL)
-+ if(!(msBlk->fragment[i].data = (unsigned char *)
-+ kmalloc(SQUASHFS_FILE_MAX_SIZE, GFP_KERNEL))) {
-+ ERROR("Failed to allocate fragment cache block\n");
-+ up(&msBlk->fragment_mutex);
-+ return NULL;
-+ }
-+
-+ msBlk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+ msBlk->fragment[i].locked = 1;
-+ up(&msBlk->fragment_mutex);
-+ if(!(msBlk->fragment[i].length = read_data(s, msBlk->fragment[i].data, start_block, length,
-+ 1, NULL))) {
-+ ERROR("Unable to read fragment cache block [%x]\n", start_block);
-+ msBlk->fragment[i].locked = 0;
-+ return NULL;
-+ }
-+ msBlk->fragment[i].block = start_block;
-+ TRACE("New fragment %d, start block %d, locked %d\n", i, msBlk->fragment[i].block, msBlk->fragment[i].locked);
-+ return &msBlk->fragment[i];
-+ }
-+
-+ msBlk->fragment[i].locked ++;
-+ up(&msBlk->fragment_mutex);
-+
-+ TRACE("Got fragment %d, start block %d, locked %d\n", i, msBlk->fragment[i].block, msBlk->fragment[i].locked);
-+ return &msBlk->fragment[i];
-+ }
-+}
-+
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+static struct inode *squashfs_iget_1(struct super_block *s, squashfs_inode inode)
-+{
-+ struct inode *i = new_inode(s);
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ unsigned int block = SQUASHFS_INODE_BLK(inode) + sBlk->inode_table_start;
-+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+ unsigned int next_block, next_offset;
-+ squashfs_base_inode_header_1 inodeb;
-+
-+ TRACE("Entered squashfs_iget_1\n");
-+
-+ if(msBlk->swap) {
-+ squashfs_base_inode_header_1 sinodeb;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodeb, block, offset,
-+ sizeof(sinodeb), &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_BASE_INODE_HEADER_1(&inodeb, &sinodeb, sizeof(sinodeb));
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodeb, block, offset,
-+ sizeof(inodeb), &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_nlink = 1;
-+
-+ i->i_mtime = sBlk->mkfs_time;
-+ i->i_atime = sBlk->mkfs_time;
-+ i->i_ctime = sBlk->mkfs_time;
-+
-+ if(inodeb.inode_type != SQUASHFS_IPC_TYPE)
-+ i->i_uid = msBlk->uid[((inodeb.inode_type - 1) / SQUASHFS_TYPES) * 16 + inodeb.uid];
-+ i->i_ino = SQUASHFS_MK_VFS_INODE(block - sBlk->inode_table_start, offset);
-+
-+ i->i_mode = inodeb.mode;
-+
-+ switch(inodeb.inode_type == SQUASHFS_IPC_TYPE ? SQUASHFS_IPC_TYPE : (inodeb.inode_type - 1) % SQUASHFS_TYPES + 1) {
-+ case SQUASHFS_FILE_TYPE: {
-+ squashfs_reg_inode_header_1 inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_reg_inode_header_1 sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_REG_INODE_HEADER_1(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = inodep.file_size;
-+ i->i_fop = &generic_ro_fops;
-+ if(sBlk->block_size > 4096)
-+ i->i_data.a_ops = &squashfs_aops;
-+ else if(sBlk->block_size == 4096)
-+ i->i_data.a_ops = &squashfs_aops_4K;
-+ else
-+ i->i_data.a_ops = &squashfs_aops_lessthan4K;
-+ i->i_mode |= S_IFREG;
-+ i->i_mtime = inodep.mtime;
-+ i->i_atime = inodep.mtime;
-+ i->i_ctime = inodep.mtime;
-+ i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+ i->i_blksize = PAGE_CACHE_SIZE;
-+ i->u.squashfs_i.fragment_start_block = SQUASHFS_INVALID_BLK;
-+ i->u.squashfs_i.fragment_offset = 0;
-+ i->u.squashfs_i.start_block = inodep.start_block;
-+ i->u.squashfs_i.block_list_start = next_block;
-+ i->u.squashfs_i.offset = next_offset;
-+ TRACE("File inode %x:%x, start_block %x, block_list_start %x, offset %x\n",
-+ SQUASHFS_INODE_BLK(inode), offset, inodep.start_block, next_block, next_offset);
-+ break;
-+ }
-+ case SQUASHFS_DIR_TYPE: {
-+ squashfs_dir_inode_header_1 inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_dir_inode_header_1 sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_DIR_INODE_HEADER_1(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = inodep.file_size;
-+ i->i_op = &squashfs_dir_inode_ops;
-+ i->i_fop = &squashfs_dir_ops;
-+ i->i_mode |= S_IFDIR;
-+ i->i_mtime = inodep.mtime;
-+ i->i_atime = inodep.mtime;
-+ i->i_ctime = inodep.mtime;
-+ i->u.squashfs_i.start_block = inodep.start_block;
-+ i->u.squashfs_i.offset = inodep.offset;
-+ TRACE("Directory inode %x:%x, start_block %x, offset %x\n", SQUASHFS_INODE_BLK(inode), offset,
-+ inodep.start_block, inodep.offset);
-+ break;
-+ }
-+ case SQUASHFS_SYMLINK_TYPE: {
-+ squashfs_symlink_inode_header_1 inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_symlink_inode_header_1 sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = inodep.symlink_size;
-+ i->i_op = &page_symlink_inode_operations;
-+ i->i_data.a_ops = &squashfs_symlink_aops;
-+ i->i_mode |= S_IFLNK;
-+ i->u.squashfs_i.start_block = next_block;
-+ i->u.squashfs_i.offset = next_offset;
-+ TRACE("Symbolic link inode %x:%x, start_block %x, offset %x\n",
-+ SQUASHFS_INODE_BLK(inode), offset, next_block, next_offset);
-+ break;
-+ }
-+ case SQUASHFS_BLKDEV_TYPE:
-+ case SQUASHFS_CHRDEV_TYPE: {
-+ squashfs_dev_inode_header_1 inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_dev_inode_header_1 sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_DEV_INODE_HEADER_1(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = 0;
-+ i->i_mode |= (inodeb.inode_type == SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : S_IFBLK;
-+ init_special_inode(i, i->i_mode, inodep.rdev);
-+ TRACE("Device inode %x:%x, rdev %x\n", SQUASHFS_INODE_BLK(inode), offset, inodep.rdev);
-+ break;
-+ }
-+ case SQUASHFS_IPC_TYPE: {
-+ squashfs_ipc_inode_header_1 inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_ipc_inode_header_1 sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_IPC_INODE_HEADER_1(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = 0;
-+ i->i_mode |= (inodep.type == SQUASHFS_FIFO_TYPE) ? S_IFIFO : S_IFSOCK;
-+ i->i_uid = msBlk->uid[inodep.offset * 16 + inodeb.uid];
-+ init_special_inode(i, i->i_mode, 0);
-+ break;
-+ }
-+ default:
-+ ERROR("Unknown inode type %d in squashfs_iget!\n", inodeb.inode_type);
-+ goto failed_read1;
-+ }
-+
-+ if(inodeb.guid == SQUASHFS_GUIDS)
-+ i->i_gid = i->i_uid;
-+ else
-+ i->i_gid = msBlk->guid[inodeb.guid];
-+
-+ return i;
-+
-+failed_read:
-+ ERROR("Unable to read inode [%x:%x]\n", block, offset);
-+
-+failed_read1:
-+ return NULL;
-+}
-+#endif
-+
-+
-+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode inode)
-+{
-+ struct inode *i = new_inode(s);
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ unsigned int block = SQUASHFS_INODE_BLK(inode) + sBlk->inode_table_start;
-+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
-+ unsigned int next_block, next_offset;
-+ squashfs_base_inode_header inodeb;
-+
-+ TRACE("Entered squashfs_iget\n");
-+
-+ if(msBlk->swap) {
-+ squashfs_base_inode_header sinodeb;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodeb, block, offset,
-+ sizeof(sinodeb), &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(&inodeb, &sinodeb, sizeof(sinodeb));
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodeb, block, offset,
-+ sizeof(inodeb), &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_nlink = 1;
-+
-+ i->i_mtime = sBlk->mkfs_time;
-+ i->i_atime = sBlk->mkfs_time;
-+ i->i_ctime = sBlk->mkfs_time;
-+
-+ if(inodeb.inode_type != SQUASHFS_IPC_TYPE)
-+ i->i_uid = msBlk->uid[((inodeb.inode_type - 1) / SQUASHFS_TYPES) * 16 + inodeb.uid];
-+ i->i_ino = SQUASHFS_MK_VFS_INODE(block - sBlk->inode_table_start, offset);
-+
-+ i->i_mode = inodeb.mode;
-+
-+ switch(inodeb.inode_type) {
-+ case SQUASHFS_FILE_TYPE: {
-+ squashfs_reg_inode_header inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_reg_inode_header sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_REG_INODE_HEADER(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->u.squashfs_i.fragment_start_block = SQUASHFS_INVALID_BLK;
-+ if(inodep.fragment != SQUASHFS_INVALID_BLK && !get_fragment_location(s, inodep.fragment,
-+ &i->u.squashfs_i.fragment_start_block, &i->u.squashfs_i.fragment_size))
-+ goto failed_read;
-+
-+ i->u.squashfs_i.fragment_offset = inodep.offset;
-+ i->i_size = inodep.file_size;
-+ i->i_fop = &generic_ro_fops;
-+ if(sBlk->block_size > 4096)
-+ i->i_data.a_ops = &squashfs_aops;
-+ else
-+ i->i_data.a_ops = &squashfs_aops_4K;
-+ i->i_mode |= S_IFREG;
-+ i->i_mtime = inodep.mtime;
-+ i->i_atime = inodep.mtime;
-+ i->i_ctime = inodep.mtime;
-+ i->i_blocks = ((i->i_size - 1) >> 9) + 1;
-+ i->i_blksize = PAGE_CACHE_SIZE;
-+ i->u.squashfs_i.start_block = inodep.start_block;
-+ i->u.squashfs_i.block_list_start = next_block;
-+ i->u.squashfs_i.offset = next_offset;
-+ TRACE("File inode %x:%x, start_block %x, block_list_start %x, offset %x fragment_index %x fragment_offset %x\n",
-+ SQUASHFS_INODE_BLK(inode), offset, inodep.start_block, next_block, next_offset, inodep.fragment, inodep.offset);
-+ break;
-+ }
-+ case SQUASHFS_DIR_TYPE: {
-+ squashfs_dir_inode_header inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_dir_inode_header sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_DIR_INODE_HEADER(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = inodep.file_size;
-+ i->i_op = &squashfs_dir_inode_ops;
-+ i->i_fop = &squashfs_dir_ops;
-+ i->i_mode |= S_IFDIR;
-+ i->i_mtime = inodep.mtime;
-+ i->i_atime = inodep.mtime;
-+ i->i_ctime = inodep.mtime;
-+ i->u.squashfs_i.start_block = inodep.start_block;
-+ i->u.squashfs_i.offset = inodep.offset;
-+ TRACE("Directory inode %x:%x, start_block %x, offset %x\n", SQUASHFS_INODE_BLK(inode), offset,
-+ inodep.start_block, inodep.offset);
-+ break;
-+ }
-+ case SQUASHFS_SYMLINK_TYPE: {
-+ squashfs_symlink_inode_header inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_symlink_inode_header sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = inodep.symlink_size;
-+ i->i_op = &page_symlink_inode_operations;
-+ i->i_data.a_ops = &squashfs_symlink_aops;
-+ i->i_mode |= S_IFLNK;
-+ i->u.squashfs_i.start_block = next_block;
-+ i->u.squashfs_i.offset = next_offset;
-+ TRACE("Symbolic link inode %x:%x, start_block %x, offset %x\n",
-+ SQUASHFS_INODE_BLK(inode), offset, next_block, next_offset);
-+ break;
-+ }
-+ case SQUASHFS_BLKDEV_TYPE:
-+ case SQUASHFS_CHRDEV_TYPE: {
-+ squashfs_dev_inode_header inodep;
-+
-+ if(msBlk->swap) {
-+ squashfs_dev_inode_header sinodep;
-+
-+ if(!squashfs_get_cached_block(s, (char *) &sinodep, block, offset, sizeof(sinodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+ SQUASHFS_SWAP_DEV_INODE_HEADER(&inodep, &sinodep);
-+ } else
-+ if(!squashfs_get_cached_block(s, (char *) &inodep, block, offset, sizeof(inodep),
-+ &next_block, &next_offset))
-+ goto failed_read;
-+
-+ i->i_size = 0;
-+ i->i_mode |= (inodeb.inode_type == SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : S_IFBLK;
-+ init_special_inode(i, i->i_mode, inodep.rdev);
-+ TRACE("Device inode %x:%x, rdev %x\n", SQUASHFS_INODE_BLK(inode), offset, inodep.rdev);
-+ break;
-+ }
-+ case SQUASHFS_FIFO_TYPE:
-+ case SQUASHFS_SOCKET_TYPE: {
-+ i->i_size = 0;
-+ i->i_mode |= (inodeb.inode_type == SQUASHFS_FIFO_TYPE) ? S_IFIFO : S_IFSOCK;
-+ init_special_inode(i, i->i_mode, 0);
-+ break;
-+ }
-+ default:
-+ ERROR("Unknown inode type %d in squashfs_iget!\n", inodeb.inode_type);
-+ goto failed_read1;
-+ }
-+
-+ if(inodeb.guid == SQUASHFS_GUIDS)
-+ i->i_gid = i->i_uid;
-+ else
-+ i->i_gid = msBlk->guid[inodeb.guid];
-+
-+ return i;
-+
-+failed_read:
-+ ERROR("Unable to read inode [%x:%x]\n", block, offset);
-+
-+failed_read1:
-+ return NULL;
-+}
-+
-+
-+static struct super_block *squashfs_read_super(struct super_block *s,
-+ void *data, int silent)
-+{
-+ kdev_t dev = s->s_dev;
-+ squashfs_sb_info *msBlk = &s->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ int i;
-+
-+ TRACE("Entered squashfs_read_superblock\n");
-+
-+ msBlk->devblksize = get_hardsect_size(dev);
-+ if(msBlk->devblksize < BLOCK_SIZE)
-+ msBlk->devblksize = BLOCK_SIZE;
-+ msBlk->devblksize_log2 = ffz(~msBlk->devblksize);
-+ set_blocksize(dev, msBlk->devblksize);
-+ s->s_blocksize = msBlk->devblksize;
-+ s->s_blocksize_bits = msBlk->devblksize_log2;
-+
-+ init_MUTEX(&msBlk->read_page_mutex);
-+ init_MUTEX(&msBlk->block_cache_mutex);
-+ init_MUTEX(&msBlk->fragment_mutex);
-+
-+ init_waitqueue_head(&msBlk->waitq);
-+ init_waitqueue_head(&msBlk->fragment_wait_queue);
-+
-+ if(!read_data(s, (char *) sBlk, SQUASHFS_START, sizeof(squashfs_super_block) | SQUASHFS_COMPRESSED_BIT, 0, NULL)) {
-+ SERROR("unable to read superblock\n");
-+ goto failed_mount;
-+ }
-+
-+ /* Check it is a SQUASHFS superblock */
-+ msBlk->swap = 0;
-+ if((s->s_magic = sBlk->s_magic) != SQUASHFS_MAGIC) {
-+ if(sBlk->s_magic == SQUASHFS_MAGIC_SWAP) {
-+ squashfs_super_block sblk;
-+ WARNING("Mounting a different endian SQUASHFS filesystem on %s\n", bdevname(dev));
-+ SQUASHFS_SWAP_SUPER_BLOCK(&sblk, sBlk);
-+ memcpy(sBlk, &sblk, sizeof(squashfs_super_block));
-+ msBlk->swap = 1;
-+ } else {
-+ SERROR("Can't find a SQUASHFS superblock on %s\n", bdevname(dev));
-+ goto failed_mount;
-+ }
-+ }
-+
-+ /* Check the MAJOR & MINOR versions */
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+ if((sBlk->s_major != 1) && (sBlk->s_major != 2 || sBlk->s_minor > SQUASHFS_MINOR)) {
-+ SERROR("Major/Minor mismatch, filesystem is (%d:%d), I support (1 : x) or (2 : <= %d)\n",
-+ sBlk->s_major, sBlk->s_minor, SQUASHFS_MINOR);
-+ goto failed_mount;
-+ }
-+ if(sBlk->s_major == 1)
-+ sBlk->block_size = sBlk->block_size_1;
-+#else
-+ if(sBlk->s_major != SQUASHFS_MAJOR || sBlk->s_minor > SQUASHFS_MINOR) {
-+ SERROR("Major/Minor mismatch, filesystem is (%d:%d), I support (%d: <= %d)\n",
-+ sBlk->s_major, sBlk->s_minor, SQUASHFS_MAJOR, SQUASHFS_MINOR);
-+ goto failed_mount;
-+ }
-+#endif
-+
-+ TRACE("Found valid superblock on %s\n", bdevname(dev));
-+ TRACE("Inodes are %scompressed\n", SQUASHFS_UNCOMPRESSED_INODES(sBlk->flags) ? "un" : "");
-+ TRACE("Data is %scompressed\n", SQUASHFS_UNCOMPRESSED_DATA(sBlk->flags) ? "un" : "");
-+ TRACE("Check data is %s present in the filesystem\n", SQUASHFS_CHECK_DATA(sBlk->flags) ? "" : "not");
-+ TRACE("Filesystem size %d bytes\n", sBlk->bytes_used);
-+ TRACE("Block size %d\n", sBlk->block_size);
-+ TRACE("Number of inodes %d\n", sBlk->inodes);
-+ if(sBlk->s_major > 1)
-+ TRACE("Number of fragments %d\n", sBlk->fragments);
-+ TRACE("Number of uids %d\n", sBlk->no_uids);
-+ TRACE("Number of gids %d\n", sBlk->no_guids);
-+ TRACE("sBlk->inode_table_start %x\n", sBlk->inode_table_start);
-+ TRACE("sBlk->directory_table_start %x\n", sBlk->directory_table_start);
-+ if(sBlk->s_major > 1)
-+ TRACE("sBlk->fragment_table_start %x\n", sBlk->fragment_table_start);
-+ TRACE("sBlk->uid_start %x\n", sBlk->uid_start);
-+
-+ s->s_flags |= MS_RDONLY;
-+ s->s_op = &squashfs_ops;
-+
-+ /* Init inode_table block pointer array */
-+ if(!(msBlk->block_cache = (squashfs_cache *) kmalloc(sizeof(squashfs_cache) * SQUASHFS_CACHED_BLKS, GFP_KERNEL))) {
-+ ERROR("Failed to allocate block cache\n");
-+ goto failed_mount;
-+ }
-+
-+ for(i = 0; i < SQUASHFS_CACHED_BLKS; i++)
-+ msBlk->block_cache[i].block = SQUASHFS_INVALID_BLK;
-+
-+ msBlk->next_cache = 0;
-+
-+ /* Allocate read_data block */
-+ msBlk->read_size = (sBlk->block_size < SQUASHFS_METADATA_SIZE) ? SQUASHFS_METADATA_SIZE : sBlk->block_size;
-+ if(!(msBlk->read_data = (char *) kmalloc(msBlk->read_size, GFP_KERNEL))) {
-+ ERROR("Failed to allocate read_data block\n");
-+ goto failed_mount1;
-+ }
-+
-+ /* Allocate read_page block */
-+ if(sBlk->block_size > PAGE_CACHE_SIZE &&
-+ !(msBlk->read_page = (char *) kmalloc(sBlk->block_size, GFP_KERNEL))) {
-+ ERROR("Failed to allocate read_page block\n");
-+ goto failed_mount2;
-+ }
-+
-+ /* Allocate uid and gid tables */
-+ if(!(msBlk->uid = (squashfs_uid *) kmalloc((sBlk->no_uids +
-+ sBlk->no_guids) * sizeof(squashfs_uid), GFP_KERNEL))) {
-+ ERROR("Failed to allocate uid/gid table\n");
-+ goto failed_mount3;
-+ }
-+ msBlk->guid = msBlk->uid + sBlk->no_uids;
-+
-+ if(msBlk->swap) {
-+ squashfs_uid suid[sBlk->no_uids + sBlk->no_guids];
-+
-+ if(!read_data(s, (char *) &suid, sBlk->uid_start, ((sBlk->no_uids + sBlk->no_guids) *
-+ sizeof(squashfs_uid)) | SQUASHFS_COMPRESSED_BIT, 0, NULL)) {
-+ SERROR("unable to read uid/gid table\n");
-+ goto failed_mount4;
-+ }
-+ SQUASHFS_SWAP_DATA(msBlk->uid, suid, (sBlk->no_uids + sBlk->no_guids), (sizeof(squashfs_uid) * 8));
-+ } else
-+ if(!read_data(s, (char *) msBlk->uid, sBlk->uid_start, ((sBlk->no_uids + sBlk->no_guids) *
-+ sizeof(squashfs_uid)) | SQUASHFS_COMPRESSED_BIT, 0, NULL)) {
-+ SERROR("unable to read uid/gid table\n");
-+ goto failed_mount4;
-+ }
-+
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+ if(sBlk->s_major == 1) {
-+ msBlk->iget = squashfs_iget_1;
-+ msBlk->read_blocklist = read_blocklist_1;
-+ msBlk->fragment = (struct squashfs_fragment_cache *) msBlk->fragment_index = NULL;
-+ goto allocate_root;
-+ }
-+#endif
-+ msBlk->iget = squashfs_iget;
-+ msBlk->read_blocklist = read_blocklist;
-+
-+ if(!(msBlk->fragment = (struct squashfs_fragment_cache *) kmalloc(sizeof(struct squashfs_fragment_cache) * SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) {
-+ ERROR("Failed to allocate fragment block cache\n");
-+ goto failed_mount4;
-+ }
-+
-+ for(i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) {
-+ msBlk->fragment[i].locked = 0;
-+ msBlk->fragment[i].block = SQUASHFS_INVALID_BLK;
-+ msBlk->fragment[i].data = NULL;
-+ }
-+
-+ msBlk->next_fragment = 0;
-+
-+ /* Allocate fragment index table */
-+ if(!(msBlk->fragment_index = (squashfs_fragment_index *) kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES(sBlk->fragments), GFP_KERNEL))) {
-+ ERROR("Failed to allocate uid/gid table\n");
-+ goto failed_mount5;
-+ }
-+
-+ if(SQUASHFS_FRAGMENT_INDEX_BYTES(sBlk->fragments) &&
-+ !read_data(s, (char *) msBlk->fragment_index, sBlk->fragment_table_start,
-+ SQUASHFS_FRAGMENT_INDEX_BYTES(sBlk->fragments) | SQUASHFS_COMPRESSED_BIT, 0, NULL)) {
-+ SERROR("unable to read fragment index table\n");
-+ goto failed_mount6;
-+ }
-+
-+ if(msBlk->swap) {
-+ int i;
-+ squashfs_fragment_index fragment;
-+
-+ for(i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sBlk->fragments); i++) {
-+ SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment), &msBlk->fragment_index[i], 1);
-+ msBlk->fragment_index[i] = fragment;
-+ }
-+ }
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+allocate_root:
-+#endif
-+ if(!(s->s_root = d_alloc_root((msBlk->iget)(s, sBlk->root_inode)))) {
-+ ERROR("Root inode create failed\n");
-+ goto failed_mount5;
-+ }
-+
-+ TRACE("Leaving squashfs_read_super\n");
-+ return s;
-+
-+failed_mount6:
-+ kfree(msBlk->fragment_index);
-+failed_mount5:
-+ kfree(msBlk->fragment);
-+failed_mount4:
-+ kfree(msBlk->uid);
-+failed_mount3:
-+ kfree(msBlk->read_page);
-+failed_mount2:
-+ kfree(msBlk->read_data);
-+failed_mount1:
-+ kfree(msBlk->block_cache);
-+failed_mount:
-+ return NULL;
-+}
-+
-+
-+static int squashfs_statfs(struct super_block *s, struct statfs *buf)
-+{
-+ squashfs_super_block *sBlk = &s->u.squashfs_sb.sBlk;
-+
-+ TRACE("Entered squashfs_statfs\n");
-+ buf->f_type = SQUASHFS_MAGIC;
-+ buf->f_bsize = sBlk->block_size;
-+ buf->f_blocks = ((sBlk->bytes_used - 1) >> sBlk->block_log) + 1;
-+ buf->f_bfree = buf->f_bavail = 0;
-+ buf->f_files = sBlk->inodes;
-+ buf->f_ffree = 0;
-+ buf->f_namelen = SQUASHFS_NAME_LEN;
-+ return 0;
-+}
-+
-+
-+static int squashfs_symlink_readpage(struct file *file, struct page *page)
-+{
-+ struct inode *inode = page->mapping->host;
-+ int index = page->index << PAGE_CACHE_SHIFT, length, bytes;
-+ int block = inode->u.squashfs_i.start_block;
-+ int offset = inode->u.squashfs_i.offset;
-+ void *pageaddr = kmap(page);
-+
-+ TRACE("Entered squashfs_symlink_readpage, page index %x, start block %x, offset %x\n",
-+ (unsigned int) page->index, inode->u.squashfs_i.start_block, inode->u.squashfs_i.offset);
-+
-+ for(length = 0; length < index; length += bytes) {
-+ if(!(bytes = squashfs_get_cached_block(inode->i_sb, NULL, block, offset,
-+ PAGE_CACHE_SIZE, &block, &offset))) {
-+ ERROR("Unable to read symbolic link [%x:%x]\n", block, offset);
-+ goto skip_read;
-+ }
-+ }
-+
-+ if(length != index) {
-+ ERROR("(squashfs_symlink_readpage) length != index\n");
-+ bytes = 0;
-+ goto skip_read;
-+ }
-+
-+ bytes = (inode->i_size - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE : inode->i_size - length;
-+ if(!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, offset, bytes, &block, &offset)))
-+ ERROR("Unable to read symbolic link [%x:%x]\n", block, offset);
-+
-+skip_read:
-+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+ kunmap(page);
-+ flush_dcache_page(page);
-+ SetPageUptodate(page);
-+ UnlockPage(page);
-+
-+ return 0;
-+}
-+
-+
-+#define SIZE 256
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+static unsigned int read_blocklist_1(struct inode *inode, int index, int readahead_blks,
-+ char *block_list, char **block_p, unsigned int *bsize)
-+{
-+ squashfs_sb_info *msBlk = &inode->i_sb->u.squashfs_sb;
-+ unsigned short *block_listp;
-+ int i = 0;
-+ int block_ptr = inode->u.squashfs_i.block_list_start;
-+ int offset = inode->u.squashfs_i.offset;
-+ int block = inode->u.squashfs_i.start_block;
-+
-+ for(;;) {
-+ int blocks = (index + readahead_blks - i);
-+ if(blocks > (SIZE >> 1)) {
-+ if((index - i) <= (SIZE >> 1))
-+ blocks = index - i;
-+ else
-+ blocks = SIZE >> 1;
-+ }
-+
-+ if(msBlk->swap) {
-+ unsigned char sblock_list[SIZE];
-+ if(!squashfs_get_cached_block(inode->i_sb, (char *) sblock_list, block_ptr, offset, blocks << 1, &block_ptr, &offset)) {
-+ ERROR("Unable to read block list [%d:%x]\n", block_ptr, offset);
-+ return 0;
-+ }
-+ SQUASHFS_SWAP_SHORTS(((unsigned short *)block_list), ((unsigned short *)sblock_list), blocks);
-+ } else
-+ if(!squashfs_get_cached_block(inode->i_sb, (char *) block_list, block_ptr, offset, blocks << 1, &block_ptr, &offset)) {
-+ ERROR("Unable to read block list [%d:%x]\n", block_ptr, offset);
-+ return 0;
-+ }
-+ for(block_listp = (unsigned short *) block_list; i < index && blocks; i ++, block_listp ++, blocks --)
-+ block += SQUASHFS_COMPRESSED_SIZE(*block_listp);
-+ if(blocks >= readahead_blks)
-+ break;
-+ }
-+
-+ if(bsize)
-+ *bsize = SQUASHFS_COMPRESSED_SIZE(*block_listp) | (!SQUASHFS_COMPRESSED(*block_listp) ? SQUASHFS_COMPRESSED_BIT_BLOCK : 0);
-+ else
-+ (unsigned short *) *block_p = block_listp;
-+ return block;
-+}
-+#endif
-+
-+
-+
-+static unsigned int read_blocklist(struct inode *inode, int index, int readahead_blks,
-+ char *block_list, char **block_p, unsigned int *bsize)
-+{
-+ squashfs_sb_info *msBlk = &inode->i_sb->u.squashfs_sb;
-+ unsigned int *block_listp;
-+ int i = 0;
-+ int block_ptr = inode->u.squashfs_i.block_list_start;
-+ int offset = inode->u.squashfs_i.offset;
-+ int block = inode->u.squashfs_i.start_block;
-+
-+ for(;;) {
-+ int blocks = (index + readahead_blks - i);
-+ if(blocks > (SIZE >> 2)) {
-+ if((index - i) <= (SIZE >> 2))
-+ blocks = index - i;
-+ else
-+ blocks = SIZE >> 2;
-+ }
-+
-+ if(msBlk->swap) {
-+ unsigned char sblock_list[SIZE];
-+ if(!squashfs_get_cached_block(inode->i_sb, (char *) sblock_list, block_ptr, offset, blocks << 2, &block_ptr, &offset)) {
-+ ERROR("Unable to read block list [%d:%x]\n", block_ptr, offset);
-+ return 0;
-+ }
-+ SQUASHFS_SWAP_INTS(((unsigned int *)block_list), ((unsigned int *)sblock_list), blocks);
-+ } else
-+ if(!squashfs_get_cached_block(inode->i_sb, (char *) block_list, block_ptr, offset, blocks << 2, &block_ptr, &offset)) {
-+ ERROR("Unable to read block list [%d:%x]\n", block_ptr, offset);
-+ return 0;
-+ }
-+ for(block_listp = (unsigned int *) block_list; i < index && blocks; i ++, block_listp ++, blocks --)
-+ block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp);
-+ if(blocks >= readahead_blks)
-+ break;
-+ }
-+
-+ *bsize = *block_listp;
-+ return block;
-+}
-+
-+
-+static int squashfs_readpage(struct file *file, struct page *page)
-+{
-+ struct inode *inode = page->mapping->host;
-+ squashfs_sb_info *msBlk = &inode->i_sb->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ unsigned char block_list[SIZE];
-+ unsigned int bsize, block, i = 0, bytes = 0, byte_offset = 0;
-+ int index = page->index >> (sBlk->block_log - PAGE_CACHE_SHIFT);
-+ void *pageaddr = kmap(page);
-+ struct squashfs_fragment_cache *fragment;
-+ char *data_ptr = msBlk->read_page;
-+
-+ int mask = (1 << (sBlk->block_log - PAGE_CACHE_SHIFT)) - 1;
-+ int start_index = page->index & ~mask;
-+ int end_index = start_index | mask;
-+
-+ TRACE("Entered squashfs_readpage, page index %x, start block %x\n", (unsigned int) page->index,
-+ inode->u.squashfs_i.start_block);
-+
-+ if(inode->u.squashfs_i.fragment_start_block == SQUASHFS_INVALID_BLK || index < (inode->i_size >> sBlk->block_log)) {
-+ if((block = (msBlk->read_blocklist)(inode, index, 1, block_list, NULL, &bsize)) == 0)
-+ goto skip_read;
-+
-+ down(&msBlk->read_page_mutex);
-+ if(!(bytes = read_data(inode->i_sb, msBlk->read_page, block, bsize, 1, NULL))) {
-+ ERROR("Unable to read page, block %x, size %x\n", block, bsize);
-+ up(&msBlk->read_page_mutex);
-+ goto skip_read;
-+ }
-+ } else {
-+ if((fragment = get_cached_fragment(inode->i_sb, inode->u.squashfs_i.fragment_start_block, inode->u.squashfs_i.fragment_size)) == NULL) {
-+ ERROR("Unable to read page, block %x, size %x\n", inode->u.squashfs_i.fragment_start_block, (int) inode->u.squashfs_i.fragment_size);
-+ goto skip_read;
-+ }
-+ bytes = inode->u.squashfs_i.fragment_offset + (inode->i_size & (sBlk->block_size - 1));
-+ byte_offset = inode->u.squashfs_i.fragment_offset;
-+ data_ptr = fragment->data;
-+ }
-+
-+ for(i = start_index; i <= end_index && byte_offset < bytes; i++, byte_offset += PAGE_CACHE_SIZE) {
-+ struct page *push_page;
-+ int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE : bytes - byte_offset;
-+
-+ TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n", bytes, i, byte_offset, available_bytes);
-+
-+ if(i == page->index) {
-+ memcpy(pageaddr, data_ptr + byte_offset, available_bytes);
-+ memset(pageaddr + available_bytes, 0, PAGE_CACHE_SIZE - available_bytes);
-+ kunmap(page);
-+ flush_dcache_page(page);
-+ SetPageUptodate(page);
-+ UnlockPage(page);
-+ } else if((push_page = grab_cache_page_nowait(page->mapping, i))) {
-+ void *pageaddr = kmap(push_page);
-+ memcpy(pageaddr, data_ptr + byte_offset, available_bytes);
-+ memset(pageaddr + available_bytes, 0, PAGE_CACHE_SIZE - available_bytes);
-+ kunmap(push_page);
-+ flush_dcache_page(push_page);
-+ SetPageUptodate(push_page);
-+ UnlockPage(push_page);
-+ page_cache_release(push_page);
-+ }
-+ }
-+
-+ if(inode->u.squashfs_i.fragment_start_block == SQUASHFS_INVALID_BLK || index < (inode->i_size >> sBlk->block_log))
-+ up(&msBlk->read_page_mutex);
-+ else
-+ release_cached_fragment(msBlk, fragment);
-+
-+ return 0;
-+
-+skip_read:
-+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+ kunmap(page);
-+ flush_dcache_page(page);
-+ SetPageUptodate(page);
-+ UnlockPage(page);
-+
-+ return 0;
-+}
-+
-+
-+static int squashfs_readpage4K(struct file *file, struct page *page)
-+{
-+ struct inode *inode = page->mapping->host;
-+ squashfs_sb_info *msBlk = &inode->i_sb->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ unsigned char block_list[SIZE];
-+ unsigned int bsize, block, bytes = 0;
-+ void *pageaddr = kmap(page);
-+
-+ TRACE("Entered squashfs_readpage4K, page index %x, start block %x\n", (unsigned int) page->index,
-+ inode->u.squashfs_i.start_block);
-+
-+ if(page->index < (inode->i_size >> sBlk->block_log)) {
-+ block = (msBlk->read_blocklist)(inode, page->index, 1, block_list, NULL, &bsize);
-+
-+ if(!(bytes = read_data(inode->i_sb, pageaddr, block, bsize, 1, NULL)))
-+ ERROR("Unable to read page, block %x, size %x\n", block, bsize);
-+ } else {
-+ struct squashfs_fragment_cache *fragment;
-+
-+ if((fragment = get_cached_fragment(inode->i_sb, inode->u.squashfs_i.fragment_start_block, inode->u.squashfs_i.fragment_size)) == NULL)
-+ ERROR("Unable to read page, block %x, size %x\n", inode->u.squashfs_i.fragment_start_block, (int) inode->u.squashfs_i.fragment_size);
-+ else {
-+ bytes = inode->i_size & (sBlk->block_size - 1);
-+ memcpy(pageaddr, fragment->data + inode->u.squashfs_i.fragment_offset, bytes);
-+ release_cached_fragment(msBlk, fragment);
-+ }
-+ }
-+
-+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
-+ kunmap(page);
-+ flush_dcache_page(page);
-+ SetPageUptodate(page);
-+ UnlockPage(page);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+static int squashfs_readpage_lessthan4K(struct file *file, struct page *page)
-+{
-+ struct inode *inode = page->mapping->host;
-+ squashfs_sb_info *msBlk = &inode->i_sb->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ unsigned char block_list[SIZE];
-+ unsigned short *block_listp, block, bytes = 0;
-+ int index = page->index << (PAGE_CACHE_SHIFT - sBlk->block_log);
-+ int file_blocks = ((inode->i_size - 1) >> sBlk->block_log) + 1;
-+ int readahead_blks = 1 << (PAGE_CACHE_SHIFT - sBlk->block_log);
-+ void *pageaddr = kmap(page);
-+
-+ int i_end = index + (1 << (PAGE_CACHE_SHIFT - sBlk->block_log));
-+ int byte;
-+
-+ TRACE("Entered squashfs_readpage_lessthan4K, page index %x, start block %x\n", (unsigned int) page->index,
-+ inode->u.squashfs_i.start_block);
-+
-+ block = read_blocklist_1(inode, index, readahead_blks, block_list, (char **) &block_listp, NULL);
-+
-+ if(i_end > file_blocks)
-+ i_end = file_blocks;
-+
-+ while(index < i_end) {
-+ if(!(byte = read_data(inode->i_sb, pageaddr, block, *block_listp, 0, NULL))) {
-+ ERROR("Unable to read page, block %x, size %x\n", block, *block_listp);
-+ goto skip_read;
-+ }
-+ block += SQUASHFS_COMPRESSED_SIZE(*block_listp);
-+ pageaddr += byte;
-+ bytes += byte;
-+ index ++;
-+ block_listp ++;
-+ }
-+
-+skip_read:
-+ memset(pageaddr, 0, PAGE_CACHE_SIZE - bytes);
-+ kunmap(page);
-+ flush_dcache_page(page);
-+ SetPageUptodate(page);
-+ UnlockPage(page);
-+
-+ return 0;
-+}
-+#endif
-+
-+
-+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir)
-+{
-+ struct inode *i = file->f_dentry->d_inode;
-+ squashfs_sb_info *msBlk = &i->i_sb->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ int next_block = i->u.squashfs_i.start_block + sBlk->directory_table_start, next_offset =
-+ i->u.squashfs_i.offset, length = 0, dirs_read = 0, dir_count;
-+ squashfs_dir_header dirh;
-+ char buffer[sizeof(squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1];
-+ squashfs_dir_entry *dire = (squashfs_dir_entry *) buffer;
-+
-+ TRACE("Entered squashfs_readdir [%x:%x]\n", next_block, next_offset);
-+
-+ while(length < i->i_size) {
-+ /* read directory header */
-+ if(msBlk->swap) {
-+ squashfs_dir_header sdirh;
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, next_block,
-+ next_offset, sizeof(sdirh), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(sdirh);
-+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+ } else {
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) &dirh, next_block,
-+ next_offset, sizeof(dirh), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(dirh);
-+ }
-+
-+ dir_count = dirh.count + 1;
-+ while(dir_count--) {
-+ if(msBlk->swap) {
-+ squashfs_dir_entry sdire;
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) &sdire, next_block,
-+ next_offset, sizeof(sdire), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(sdire);
-+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+ } else {
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) dire, next_block,
-+ next_offset, sizeof(*dire), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(*dire);
-+ }
-+
-+ if(!squashfs_get_cached_block(i->i_sb, dire->name, next_block,
-+ next_offset, dire->size + 1, &next_block, &next_offset))
-+ goto failed_read;
-+ length += dire->size + 1;
-+
-+ if(file->f_pos >= length)
-+ continue;
-+
-+ dire->name[dire->size + 1] = '\0';
-+
-+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n", (unsigned int) dirent,
-+ dire->name, dire->size + 1, (int) file->f_pos,
-+ dirh.start_block, dire->offset, squashfs_filetype_table[dire->type]);
-+
-+ if(filldir(dirent, dire->name, dire->size + 1, file->f_pos, SQUASHFS_MK_VFS_INODE(dirh.start_block,
-+ dire->offset), squashfs_filetype_table[dire->type]) < 0) {
-+ TRACE("Filldir returned less than 0\n");
-+ return dirs_read;
-+ }
-+
-+ file->f_pos = length;
-+ dirs_read ++;
-+ }
-+ }
-+
-+ return dirs_read;
-+
-+failed_read:
-+ ERROR("Unable to read directory block [%x:%x]\n", next_block, next_offset);
-+ return 0;
-+}
-+
-+
-+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry)
-+{
-+ const char *name =dentry->d_name.name;
-+ int len = dentry->d_name.len;
-+ struct inode *inode = NULL;
-+ squashfs_sb_info *msBlk = &i->i_sb->u.squashfs_sb;
-+ squashfs_super_block *sBlk = &msBlk->sBlk;
-+ int next_block = i->u.squashfs_i.start_block + sBlk->directory_table_start, next_offset =
-+ i->u.squashfs_i.offset, length = 0, dir_count;
-+ squashfs_dir_header dirh;
-+ char buffer[sizeof(squashfs_dir_entry) + SQUASHFS_NAME_LEN];
-+ squashfs_dir_entry *dire = (squashfs_dir_entry *) buffer;
-+
-+ TRACE("Entered squashfs_lookup [%x:%x]\n", next_block, next_offset);
-+
-+ while(length < i->i_size) {
-+ /* read directory header */
-+ if(msBlk->swap) {
-+ squashfs_dir_header sdirh;
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, next_block, next_offset,
-+ sizeof(sdirh), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(sdirh);
-+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
-+ } else {
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) &dirh, next_block, next_offset,
-+ sizeof(dirh), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(dirh);
-+ }
-+
-+ dir_count = dirh.count + 1;
-+ while(dir_count--) {
-+ if(msBlk->swap) {
-+ squashfs_dir_entry sdire;
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) &sdire,
-+ next_block,next_offset, sizeof(sdire), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(sdire);
-+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
-+ } else {
-+ if(!squashfs_get_cached_block(i->i_sb, (char *) dire,
-+ next_block,next_offset, sizeof(*dire), &next_block, &next_offset))
-+ goto failed_read;
-+ length += sizeof(*dire);
-+ }
-+
-+ if(!squashfs_get_cached_block(i->i_sb, dire->name,
-+ next_block, next_offset, dire->size + 1, &next_block, &next_offset))
-+ goto failed_read;
-+ length += dire->size + 1;
-+
-+ if((len == dire->size + 1) && !strncmp(name, dire->name, len)) {
-+ squashfs_inode ino = SQUASHFS_MKINODE(dirh.start_block, dire->offset);
-+
-+ TRACE("calling squashfs_iget for directory entry %s, inode %x:%x\n",
-+ name, dirh.start_block, dire->offset);
-+
-+ inode = (msBlk->iget)(i->i_sb, ino);
-+
-+ goto exit_loop;
-+ }
-+ }
-+ }
-+
-+exit_loop:
-+ d_add(dentry, inode);
-+ return ERR_PTR(0);
-+
-+failed_read:
-+ ERROR("Unable to read directory block [%x:%x]\n", next_block, next_offset);
-+ goto exit_loop;
-+}
-+
-+
-+static void squashfs_put_super(struct super_block *s)
-+{
-+ if(s->u.squashfs_sb.block_cache) kfree(s->u.squashfs_sb.block_cache);
-+ if(s->u.squashfs_sb.read_data) kfree(s->u.squashfs_sb.read_data);
-+ if(s->u.squashfs_sb.read_page) kfree(s->u.squashfs_sb.read_page);
-+ if(s->u.squashfs_sb.uid) kfree(s->u.squashfs_sb.uid);
-+ s->u.squashfs_sb.block_cache = (void *) s->u.squashfs_sb.uid =
-+ s->u.squashfs_sb.read_data = s->u.squashfs_sb.read_page = NULL;
-+}
-+
-+
-+static int __init init_squashfs_fs(void)
-+{
-+
-+ if(!(stream.workspace = (char *) vmalloc(zlib_inflate_workspacesize()))) {
-+ ERROR("Failed to allocate zlib workspace\n");
-+ return -ENOMEM;
-+ }
-+ return register_filesystem(&squashfs_fs_type);
-+}
-+
-+
-+static void __exit exit_squashfs_fs(void)
-+{
-+ vfree(stream.workspace);
-+ unregister_filesystem(&squashfs_fs_type);
-+}
-+
-+
-+EXPORT_NO_SYMBOLS;
-+
-+module_init(init_squashfs_fs);
-+module_exit(exit_squashfs_fs);
-+MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem");
-+MODULE_AUTHOR("Phillip Lougher <plougher@users.sourceforge.net>");
-+MODULE_LICENSE("GPL");
-diff -Nurb linux.orig/include/linux/fs.h linux/include/linux/fs.h
---- linux.orig/include/linux/fs.h 2003-07-04 04:12:25.000000000 -0400
-+++ linux/include/linux/fs.h 2004-05-25 21:13:03.000000000 -0400
-@@ -313,6 +313,7 @@
- #include <linux/usbdev_fs_i.h>
- #include <linux/jffs2_fs_i.h>
- #include <linux/cramfs_fs_sb.h>
-+#include <linux/squashfs_fs_i.h>
-
- /*
- * Attribute flags. These should be or-ed together to figure out what
-@@ -503,6 +504,7 @@
- struct socket socket_i;
- struct usbdev_inode_info usbdev_i;
- struct jffs2_inode_info jffs2_i;
-+ struct squashfs_inode_info squashfs_i;
- void *generic_ip;
- } u;
- };
-@@ -697,6 +699,7 @@
- #include <linux/usbdev_fs_sb.h>
- #include <linux/cramfs_fs_sb.h>
- #include <linux/jffs2_fs_sb.h>
-+#include <linux/squashfs_fs_sb.h>
-
- extern struct list_head super_blocks;
- extern spinlock_t sb_lock;
-@@ -755,6 +758,7 @@
- struct usbdev_sb_info usbdevfs_sb;
- struct jffs2_sb_info jffs2_sb;
- struct cramfs_sb_info cramfs_sb;
-+ struct squashfs_sb_info squashfs_sb;
- void *generic_sbp;
- } u;
- /*
-diff -Nurb linux.orig/include/linux/squashfs_fs.h linux/include/linux/squashfs_fs.h
---- linux.orig/include/linux/squashfs_fs.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux/include/linux/squashfs_fs.h 2004-05-25 21:13:03.000000000 -0400
-@@ -0,0 +1,474 @@
-+#ifndef SQUASHFS_FS
-+#define SQUASHFS_FS
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004 Phillip Lougher <plougher@users.sourceforge.net>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs.h
-+ */
-+
-+#define SQUASHFS_MAJOR 2
-+#define SQUASHFS_MINOR 0
-+#define SQUASHFS_MAGIC 0x73717368
-+#define SQUASHFS_MAGIC_SWAP 0x68737173
-+#define SQUASHFS_START 0
-+
-+/* size of metadata (inode and directory) blocks */
-+#define SQUASHFS_METADATA_SIZE 8192
-+#define SQUASHFS_METADATA_LOG 13
-+
-+/* default size of data blocks */
-+#define SQUASHFS_FILE_SIZE 65536
-+#define SQUASHFS_FILE_LOG 16
-+
-+#define SQUASHFS_FILE_MAX_SIZE 65536
-+
-+/* Max number of uids and gids */
-+#define SQUASHFS_UIDS 256
-+#define SQUASHFS_GUIDS 255
-+
-+/* Max length of filename (not 255) */
-+#define SQUASHFS_NAME_LEN 256
-+
-+#define SQUASHFS_INVALID ((long long) 0xffffffffffff)
-+#define SQUASHFS_INVALID_BLK ((long long) 0xffffffff)
-+#define SQUASHFS_USED_BLK ((long long) 0xfffffffe)
-+
-+/* Filesystem flags */
-+#define SQUASHFS_NOI 0
-+#define SQUASHFS_NOD 1
-+#define SQUASHFS_CHECK 2
-+#define SQUASHFS_NOF 3
-+#define SQUASHFS_NO_FRAG 4
-+#define SQUASHFS_ALWAYS_FRAG 5
-+#define SQUASHFS_DUPLICATE 6
-+#define SQUASHFS_BIT(flag, bit) ((flag >> bit) & 1)
-+#define SQUASHFS_UNCOMPRESSED_INODES(flags) SQUASHFS_BIT(flags, SQUASHFS_NOI)
-+#define SQUASHFS_UNCOMPRESSED_DATA(flags) SQUASHFS_BIT(flags, SQUASHFS_NOD)
-+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags) SQUASHFS_BIT(flags, SQUASHFS_NOF)
-+#define SQUASHFS_NO_FRAGMENTS(flags) SQUASHFS_BIT(flags, SQUASHFS_NO_FRAG)
-+#define SQUASHFS_ALWAYS_FRAGMENTS(flags) SQUASHFS_BIT(flags, SQUASHFS_ALWAYS_FRAG)
-+#define SQUASHFS_DUPLICATES(flags) SQUASHFS_BIT(flags, SQUASHFS_DUPLICATE)
-+#define SQUASHFS_CHECK_DATA(flags) SQUASHFS_BIT(flags, SQUASHFS_CHECK)
-+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, duplicate_checking) (noi | (nod << 1) | (check_data << 2) | (nof << 3) | (no_frag << 4) | (always_frag << 5) | (duplicate_checking << 6))
-+
-+/* Max number of types and file types */
-+#define SQUASHFS_DIR_TYPE 1
-+#define SQUASHFS_FILE_TYPE 2
-+#define SQUASHFS_SYMLINK_TYPE 3
-+#define SQUASHFS_BLKDEV_TYPE 4
-+#define SQUASHFS_CHRDEV_TYPE 5
-+#define SQUASHFS_FIFO_TYPE 6
-+#define SQUASHFS_SOCKET_TYPE 7
-+
-+/* 1.0 filesystem type definitions */
-+#define SQUASHFS_TYPES 5
-+#define SQUASHFS_IPC_TYPE 0
-+
-+/* Flag whether block is compressed or uncompressed, bit is set if block is uncompressed */
-+#define SQUASHFS_COMPRESSED_BIT (1 << 15)
-+#define SQUASHFS_COMPRESSED_SIZE(B) (((B) & ~SQUASHFS_COMPRESSED_BIT) ? \
-+ (B) & ~SQUASHFS_COMPRESSED_BIT : SQUASHFS_COMPRESSED_BIT)
-+
-+#define SQUASHFS_COMPRESSED(B) (!((B) & SQUASHFS_COMPRESSED_BIT))
-+
-+#define SQUASHFS_COMPRESSED_BIT_BLOCK (1 << 24)
-+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B) (((B) & ~SQUASHFS_COMPRESSED_BIT_BLOCK) ? \
-+ (B) & ~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK)
-+
-+#define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK))
-+
-+/*
-+ * Inode number ops. Inodes consist of a compressed block number, and an uncompressed
-+ * offset within that block
-+ */
-+#define SQUASHFS_INODE_BLK(a) ((unsigned int) ((a) >> 16))
-+#define SQUASHFS_INODE_OFFSET(a) ((unsigned int) ((a) & 0xffff))
-+#define SQUASHFS_MKINODE(A, B) ((squashfs_inode)(((squashfs_inode) (A) << 16)\
-+ + (B)))
-+
-+/* Compute 32 bit VFS inode number from squashfs inode number */
-+#define SQUASHFS_MK_VFS_INODE(a, b) ((unsigned int) (((a) << 8) + ((b) >> 2) + 1))
-+
-+/* Translate between VFS mode and squashfs mode */
-+#define SQUASHFS_MODE(a) ((a) & 0xfff)
-+
-+/* fragment and fragment table defines */
-+typedef unsigned int squashfs_fragment_index;
-+#define SQUASHFS_FRAGMENT_BYTES(A) (A * sizeof(squashfs_fragment_entry))
-+#define SQUASHFS_FRAGMENT_INDEX(A) (SQUASHFS_FRAGMENT_BYTES(A) / SQUASHFS_METADATA_SIZE)
-+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A) (SQUASHFS_FRAGMENT_BYTES(A) % SQUASHFS_METADATA_SIZE)
-+#define SQUASHFS_FRAGMENT_INDEXES(A) ((SQUASHFS_FRAGMENT_BYTES(A) + SQUASHFS_METADATA_SIZE - 1) / SQUASHFS_METADATA_SIZE)
-+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A) (SQUASHFS_FRAGMENT_INDEXES(A) * sizeof(squashfs_fragment_index))
-+#define SQUASHFS_CACHED_FRAGMENTS 3
-+
-+/* cached data constants for filesystem */
-+#define SQUASHFS_CACHED_BLKS 8
-+
-+#define SQUASHFS_MAX_FILE_SIZE_LOG 32
-+#define SQUASHFS_MAX_FILE_SIZE ((long long) 1 << (SQUASHFS_MAX_FILE_SIZE_LOG - 1))
-+
-+#define SQUASHFS_MARKER_BYTE 0xff
-+
-+/*
-+ * definitions for structures on disk
-+ */
-+
-+typedef unsigned int squashfs_block;
-+typedef long long squashfs_inode;
-+
-+typedef unsigned int squashfs_uid;
-+
-+typedef struct squashfs_super_block {
-+ unsigned int s_magic;
-+ unsigned int inodes;
-+ unsigned int bytes_used;
-+ unsigned int uid_start;
-+ unsigned int guid_start;
-+ unsigned int inode_table_start;
-+ unsigned int directory_table_start;
-+ unsigned int s_major:16;
-+ unsigned int s_minor:16;
-+ unsigned int block_size_1:16;
-+ unsigned int block_log:16;
-+ unsigned int flags:8;
-+ unsigned int no_uids:8;
-+ unsigned int no_guids:8;
-+ time_t mkfs_time /* time of filesystem creation */;
-+ squashfs_inode root_inode;
-+ unsigned int block_size;
-+ unsigned int fragments;
-+ unsigned int fragment_table_start;
-+} __attribute__ ((packed)) squashfs_super_block;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:8; /* index into uid table */
-+ unsigned int guid:8; /* index into guid table */
-+} __attribute__ ((packed)) squashfs_base_inode_header;
-+
-+typedef squashfs_base_inode_header squashfs_ipc_inode_header;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:8; /* index into uid table */
-+ unsigned int guid:8; /* index into guid table */
-+ unsigned short rdev;
-+} __attribute__ ((packed)) squashfs_dev_inode_header;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:8; /* index into uid table */
-+ unsigned int guid:8; /* index into guid table */
-+ unsigned short symlink_size;
-+ char symlink[0];
-+} __attribute__ ((packed)) squashfs_symlink_inode_header;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:8; /* index into uid table */
-+ unsigned int guid:8; /* index into guid table */
-+ time_t mtime;
-+ squashfs_block start_block;
-+ unsigned int fragment;
-+ unsigned int offset;
-+ unsigned int file_size:SQUASHFS_MAX_FILE_SIZE_LOG;
-+ unsigned short block_list[0];
-+} __attribute__ ((packed)) squashfs_reg_inode_header;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:8; /* index into uid table */
-+ unsigned int guid:8; /* index into guid table */
-+ unsigned int file_size:19;
-+ unsigned int offset:13;
-+ time_t mtime;
-+ unsigned int start_block:24;
-+} __attribute__ ((packed)) squashfs_dir_inode_header;
-+
-+typedef union {
-+ squashfs_base_inode_header base;
-+ squashfs_dev_inode_header dev;
-+ squashfs_symlink_inode_header symlink;
-+ squashfs_reg_inode_header reg;
-+ squashfs_dir_inode_header dir;
-+ squashfs_ipc_inode_header ipc;
-+} squashfs_inode_header;
-+
-+typedef struct {
-+ unsigned int offset:13;
-+ unsigned int type:3;
-+ unsigned int size:8;
-+ char name[0];
-+} __attribute__ ((packed)) squashfs_dir_entry;
-+
-+typedef struct {
-+ unsigned int count:8;
-+ unsigned int start_block:24;
-+} __attribute__ ((packed)) squashfs_dir_header;
-+
-+
-+typedef struct {
-+ unsigned int start_block;
-+ unsigned int size;
-+} __attribute__ ((packed)) squashfs_fragment_entry;
-+
-+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen);
-+extern int squashfs_uncompress_init(void);
-+extern int squashfs_uncompress_exit(void);
-+
-+/*
-+ * macros to convert each packed bitfield structure from little endian to big
-+ * endian and vice versa. These are needed when creating or using a filesystem on a
-+ * machine with different byte ordering to the target architecture.
-+ *
-+ */
-+
-+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\
-+ SQUASHFS_MEMSET(s, d, sizeof(squashfs_super_block));\
-+ SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\
-+ SQUASHFS_SWAP((s)->inodes, d, 32, 32);\
-+ SQUASHFS_SWAP((s)->bytes_used, d, 64, 32);\
-+ SQUASHFS_SWAP((s)->uid_start, d, 96, 32);\
-+ SQUASHFS_SWAP((s)->guid_start, d, 128, 32);\
-+ SQUASHFS_SWAP((s)->inode_table_start, d, 160, 32);\
-+ SQUASHFS_SWAP((s)->directory_table_start, d, 192, 32);\
-+ SQUASHFS_SWAP((s)->s_major, d, 224, 16);\
-+ SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\
-+ SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\
-+ SQUASHFS_SWAP((s)->block_log, d, 272, 16);\
-+ SQUASHFS_SWAP((s)->flags, d, 288, 8);\
-+ SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\
-+ SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\
-+ SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\
-+ SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\
-+ SQUASHFS_SWAP((s)->block_size, d, 408, 32);\
-+ SQUASHFS_SWAP((s)->fragments, d, 440, 32);\
-+ SQUASHFS_SWAP((s)->fragment_table_start, d, 472, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\
-+ SQUASHFS_MEMSET(s, d, n);\
-+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\
-+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_ipc_inode_header))
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_dev_inode_header));\
-+ SQUASHFS_SWAP((s)->rdev, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_symlink_inode_header));\
-+ SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_reg_inode_header));\
-+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
-+ SQUASHFS_SWAP((s)->start_block, d, 64, 32);\
-+ SQUASHFS_SWAP((s)->fragment, d, 96, 32);\
-+ SQUASHFS_SWAP((s)->offset, d, 128, 32);\
-+ SQUASHFS_SWAP((s)->file_size, d, 160, SQUASHFS_MAX_FILE_SIZE_LOG);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_dir_inode_header));\
-+ SQUASHFS_SWAP((s)->file_size, d, 32, 19);\
-+ SQUASHFS_SWAP((s)->offset, d, 51, 13);\
-+ SQUASHFS_SWAP((s)->mtime, d, 64, 32);\
-+ SQUASHFS_SWAP((s)->start_block, d, 96, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\
-+ SQUASHFS_MEMSET(s, d, sizeof(squashfs_dir_header));\
-+ SQUASHFS_SWAP((s)->count, d, 0, 8);\
-+ SQUASHFS_SWAP((s)->start_block, d, 8, 24);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\
-+ SQUASHFS_MEMSET(s, d, sizeof(squashfs_dir_entry));\
-+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\
-+ SQUASHFS_SWAP((s)->type, d, 13, 3);\
-+ SQUASHFS_SWAP((s)->size, d, 16, 8);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\
-+ SQUASHFS_MEMSET(s, d, sizeof(squashfs_fragment_entry));\
-+ SQUASHFS_SWAP((s)->start_block, d, 0, 32);\
-+ SQUASHFS_SWAP((s)->size, d, 32, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\
-+ int entry;\
-+ int bit_position;\
-+ SQUASHFS_MEMSET(s, d, n * 2);\
-+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += 16)\
-+ SQUASHFS_SWAP(s[entry], d, bit_position, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_INTS(s, d, n) {\
-+ int entry;\
-+ int bit_position;\
-+ SQUASHFS_MEMSET(s, d, n * 4);\
-+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += 32)\
-+ SQUASHFS_SWAP(s[entry], d, bit_position, 32);\
-+}
-+
-+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\
-+ int entry;\
-+ int bit_position;\
-+ SQUASHFS_MEMSET(s, d, n * bits / 8);\
-+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += bits)\
-+ SQUASHFS_SWAP(s[entry], d, bit_position, bits);\
-+}
-+
-+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_INTS(s, d, n)
-+
-+#ifdef SQUASHFS_1_0_COMPATIBILITY
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:4; /* index into uid table */
-+ unsigned int guid:4; /* index into guid table */
-+} __attribute__ ((packed)) squashfs_base_inode_header_1;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:4; /* index into uid table */
-+ unsigned int guid:4; /* index into guid table */
-+ unsigned int type:4;
-+ unsigned int offset:4;
-+} __attribute__ ((packed)) squashfs_ipc_inode_header_1;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:4; /* index into uid table */
-+ unsigned int guid:4; /* index into guid table */
-+ unsigned short rdev;
-+} __attribute__ ((packed)) squashfs_dev_inode_header_1;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:4; /* index into uid table */
-+ unsigned int guid:4; /* index into guid table */
-+ unsigned short symlink_size;
-+ char symlink[0];
-+} __attribute__ ((packed)) squashfs_symlink_inode_header_1;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:4; /* index into uid table */
-+ unsigned int guid:4; /* index into guid table */
-+ time_t mtime;
-+ squashfs_block start_block;
-+ unsigned int file_size:SQUASHFS_MAX_FILE_SIZE_LOG;
-+ unsigned short block_list[0];
-+} __attribute__ ((packed)) squashfs_reg_inode_header_1;
-+
-+typedef struct {
-+ unsigned int inode_type:4;
-+ unsigned int mode:12; /* protection */
-+ unsigned int uid:4; /* index into uid table */
-+ unsigned int guid:4; /* index into guid table */
-+ unsigned int file_size:19;
-+ unsigned int offset:13;
-+ time_t mtime;
-+ unsigned int start_block:24;
-+} __attribute__ ((packed)) squashfs_dir_inode_header_1;
-+
-+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\
-+ SQUASHFS_MEMSET(s, d, n);\
-+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
-+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\
-+ SQUASHFS_SWAP((s)->uid, d, 16, 4);\
-+ SQUASHFS_SWAP((s)->guid, d, 20, 4);\
-+}
-+
-+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, sizeof(squashfs_ipc_inode_header_1));\
-+ SQUASHFS_SWAP((s)->type, d, 24, 4);\
-+ SQUASHFS_SWAP((s)->offset, d, 28, 4);\
-+}
-+
-+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, sizeof(squashfs_dev_inode_header_1));\
-+ SQUASHFS_SWAP((s)->rdev, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_symlink_inode_header_1));\
-+ SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\
-+}
-+
-+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_reg_inode_header_1));\
-+ SQUASHFS_SWAP((s)->mtime, d, 24, 32);\
-+ SQUASHFS_SWAP((s)->start_block, d, 56, 32);\
-+ SQUASHFS_SWAP((s)->file_size, d, 88, SQUASHFS_MAX_FILE_SIZE_LOG);\
-+}
-+
-+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\
-+ SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, sizeof(squashfs_dir_inode_header_1));\
-+ SQUASHFS_SWAP((s)->file_size, d, 24, 19);\
-+ SQUASHFS_SWAP((s)->offset, d, 43, 13);\
-+ SQUASHFS_SWAP((s)->mtime, d, 56, 32);\
-+ SQUASHFS_SWAP((s)->start_block, d, 88, 24);\
-+}
-+#endif
-+
-+#ifdef __KERNEL__
-+/*
-+ * macros used to swap each structure entry, taking into account
-+ * bitfields and different bitfield placing conventions on differing architectures
-+ */
-+#include <asm/byteorder.h>
-+#ifdef __BIG_ENDIAN
-+ /* convert from little endian to big endian */
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, tbits, b_pos)
-+#else
-+ /* convert from big endian to little endian */
-+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, tbits, 64 - tbits - b_pos)
-+#endif
-+
-+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\
-+ int bits;\
-+ int b_pos = pos % 8;\
-+ unsigned long long val = 0;\
-+ unsigned char *s = (unsigned char *)p + (pos / 8);\
-+ unsigned char *d = ((unsigned char *) &val) + 7;\
-+ for(bits = 0; bits < (tbits + b_pos); bits += 8) \
-+ *d-- = *s++;\
-+ value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\
-+}
-+#define SQUASHFS_MEMSET(s, d, n) memset(s, 0, n);
-+#endif
-+#endif
-diff -Nurb linux.orig/include/linux/squashfs_fs_i.h linux/include/linux/squashfs_fs_i.h
---- linux.orig/include/linux/squashfs_fs_i.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux/include/linux/squashfs_fs_i.h 2004-05-25 21:13:03.000000000 -0400
-@@ -0,0 +1,33 @@
-+#ifndef SQUASHFS_FS_I
-+#define SQUASHFS_FS_I
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004 Phillip Lougher <plougher@users.sourceforge.net>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_i.h
-+ */
-+
-+typedef struct squashfs_inode_info {
-+ unsigned int start_block;
-+ unsigned int block_list_start;
-+ unsigned int offset;
-+ unsigned int fragment_start_block;
-+ unsigned int fragment_size;
-+ unsigned int fragment_offset;
-+ } squashfs_inode_info;
-+#endif
-diff -Nurb linux.orig/include/linux/squashfs_fs_sb.h linux/include/linux/squashfs_fs_sb.h
---- linux.orig/include/linux/squashfs_fs_sb.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux/include/linux/squashfs_fs_sb.h 2004-05-25 21:13:03.000000000 -0400
-@@ -0,0 +1,65 @@
-+#ifndef SQUASHFS_FS_SB
-+#define SQUASHFS_FS_SB
-+/*
-+ * Squashfs
-+ *
-+ * Copyright (c) 2002, 2003, 2004 Phillip Lougher <plougher@users.sourceforge.net>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2,
-+ * or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * squashfs_fs_sb.h
-+ */
-+
-+#include <linux/squashfs_fs.h>
-+
-+typedef struct {
-+ unsigned int block;
-+ int length;
-+ unsigned int next_index;
-+ char *data;
-+ } squashfs_cache;
-+
-+struct squashfs_fragment_cache {
-+ unsigned int block;
-+ int length;
-+ unsigned int locked;
-+ char *data;
-+ };
-+
-+typedef struct squashfs_sb_info {
-+ squashfs_super_block sBlk;
-+ int devblksize;
-+ int devblksize_log2;
-+ int swap;
-+ squashfs_cache *block_cache;
-+ struct squashfs_fragment_cache *fragment;
-+ int next_cache;
-+ int next_fragment;
-+ squashfs_uid *uid;
-+ squashfs_uid *guid;
-+ squashfs_fragment_index *fragment_index;
-+ unsigned int read_size;
-+ char *read_data;
-+ char *read_page;
-+ struct semaphore read_page_mutex;
-+ struct semaphore block_cache_mutex;
-+ struct semaphore fragment_mutex;
-+ wait_queue_head_t waitq;
-+ wait_queue_head_t fragment_wait_queue;
-+ struct inode *(*iget)(struct super_block *s, squashfs_inode inode);
-+ unsigned int (*read_blocklist)(struct inode *inode, int index, int readahead_blks,
-+ char *block_list, char **block_p, unsigned int *bsize);
-+ } squashfs_sb_info;
-+#endif
-diff -Nurb linux.orig/init/do_mounts.c linux/init/do_mounts.c
---- linux.orig/init/do_mounts.c 2003-11-08 03:13:20.000000000 -0500
-+++ linux/init/do_mounts.c 2004-05-25 21:13:03.000000000 -0400
-@@ -16,6 +16,7 @@
- #include <linux/ext2_fs.h>
- #include <linux/romfs_fs.h>
- #include <linux/cramfs_fs.h>
-+#include <linux/squashfs_fs.h>
-
- #undef BUILD_CRAMDISK
-
-@@ -470,6 +471,7 @@
- * ext2
- * romfs
- * gzip
-+ * squashfs
- */
- static int __init
- identify_ramdisk_image(int fd, int start_block)
-@@ -479,6 +481,7 @@
- struct ext2_super_block *ext2sb;
- struct romfs_super_block *romfsb;
- struct cramfs_super *cramfsb;
-+ struct squashfs_super_block *squashfsb;
- int nblocks = -1;
- unsigned char *buf;
-
-@@ -490,6 +493,7 @@
- ext2sb = (struct ext2_super_block *) buf;
- romfsb = (struct romfs_super_block *) buf;
- cramfsb = (struct cramfs_super *) buf;
-+ squashfsb = (struct squashfs_super_block *) buf;
- memset(buf, 0xe5, size);
-
- /*
-@@ -536,6 +540,15 @@
- goto done;
- }
-
-+ /* squashfs is at block zero too */
-+ if (squashfsb->s_magic == SQUASHFS_MAGIC) {
-+ printk(KERN_NOTICE
-+ "RAMDISK: squashfs filesystem found at block %d\n",
-+ start_block);
-+ nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
-+ goto done;
-+ }
-+
- /*
- * Read block 1 to test for minix and ext2 superblock
- */
-diff -Nurb linux.orig/kernel/ksyms.c linux/kernel/ksyms.c
---- linux.orig/kernel/ksyms.c 2003-07-04 04:12:28.000000000 -0400
-+++ linux/kernel/ksyms.c 2004-05-25 21:12:24.000000000 -0400
-@@ -482,9 +482,9 @@
- EXPORT_SYMBOL(simple_strtoull);
- EXPORT_SYMBOL(system_utsname); /* UTS data */
- EXPORT_SYMBOL(uts_sem); /* UTS semaphore */
--#ifndef __mips__
-+//#ifndef __mips__ //bite me. -mbm.
- EXPORT_SYMBOL(sys_call_table);
--#endif
-+//#endif
- EXPORT_SYMBOL(machine_restart);
- EXPORT_SYMBOL(machine_halt);
- EXPORT_SYMBOL(machine_power_off);
-diff -Nurb linux.orig/lib/Config.in linux/lib/Config.in
---- linux.orig/lib/Config.in 2003-07-04 04:12:29.000000000 -0400
-+++ linux/lib/Config.in 2004-05-25 21:13:03.000000000 -0400
-@@ -8,12 +8,14 @@
- # Do we need the compression support?
- #
- if [ "$CONFIG_CRAMFS" = "y" -o \
-+ "$CONFIG_SQUASHFS" = "y" -o \
- "$CONFIG_PPP_DEFLATE" = "y" -o \
- "$CONFIG_JFFS2_FS" = "y" -o \
- "$CONFIG_ZISOFS_FS" = "y" ]; then
- define_tristate CONFIG_ZLIB_INFLATE y
- else
- if [ "$CONFIG_CRAMFS" = "m" -o \
-+ "$CONFIG_SQUASHFS" = "m" -o \
- "$CONFIG_PPP_DEFLATE" = "m" -o \
- "$CONFIG_JFFS2_FS" = "m" -o \
- "$CONFIG_ZISOFS_FS" = "m" ]; then
+++ /dev/null
-diff -Nurb linux.orig/Documentation/netswap.txt linux/Documentation/netswap.txt
---- linux.orig/Documentation/netswap.txt 1969-12-31 19:00:00.000000000 -0500
-+++ linux/Documentation/netswap.txt 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,51 @@
-+ Swapping over network
-+
-+Support for this is enabled via the CONFIG_NETSWAP option, which is
-+automatically enabled when enabling swap files located on NFS volumes
-+(CONFIG_SWAP_VIA_NFS).
-+
-+When swapping to files located on a network file system like NFS or
-+CODA or others or to nbd (network block device, see `nbd.txt')
-+partitions there is the problem that this requires additional memory,
-+besides the page which is currently swapped in or out, probably at
-+least two more pages for each page in question.
-+
-+This means that not only there needs to be free space left in the swap
-+file or the swap partition, but in addition there must be enough free
-+memory left in the system to perform the swap out of pages.
-+
-+This is particularly painful as receiving data over the network itself
-+consumes memory, and this memory is allocated from an interrupt
-+context (i.e. in the interrupt handler of the network card). That
-+means that on a congested network there are chances that the machine
-+runs out of memory, simply because the network device's interrupt
-+routines allocate memory faster that it is freed by swapping via
-+network.
-+
-+To cope with this problem, there is a new socket option `SO_SWAPPING'
-+which has to be set on the `SOL_SOCKET' level with setsockopt() (see
-+setsockopt(2)). When this option is set on any network socket, then
-+the system will start to drop network packets it receives on any other
-+socket when the number of free pages falls below a certain threshold.
-+
-+This threshold initially is 4 pages less than `freepages.min' (see
-+`Documentation/sysctl/vm.txt') but can be tuned using the sysctl
-+interface by writing to the file `/proc/sys/net/swapping/threshold'
-+
-+There are two other files:
-+
-+`/proc/sys/net/swapping/dropped':
-+ how many network packets have been dropped so far. This file is
-+ writable, writing to it simply sets the counter to the given value
-+ (useful for resetting the counter).
-+
-+`/proc/sys/net/swapping/sock_count':
-+ How many network sockets have the `SO_SWAPPING' option set (read
-+ only, of course).
-+
-+When using swap-files on NFS volumes, then the `SO_SWAPPING' option is
-+set or cleared by swapon/swapoff system calls, so the user need not
-+care about it.
-+
-+Swapping over the network is insecure unless the data would be
-+encrypted, which is not the case with NFS. It is also very slow.
-diff -Nurb linux.orig/Documentation/nfsswap.txt linux/Documentation/nfsswap.txt
---- linux.orig/Documentation/nfsswap.txt 1969-12-31 19:00:00.000000000 -0500
-+++ linux/Documentation/nfsswap.txt 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,41 @@
-+ Swapping to files on NFS volumes
-+
-+To do this you have to say `Y' or `M' to the CONFIG_SWAP_VIA_NFS
-+configuration option. When compling support for this as a module you
-+should read `Documentation/modules.txt'. For auto-loading of the
-+module during the `swapon' system call you have to place a line like
-+
-+alias swapfile-mod nfsswap
-+
-+in `/etc/modules.conf' (or `/etc/conf.modules', depending on your
-+setup). NFS volumes holding swapfile should be mounted with `rsize'
-+and `wsize' set to something less than the size of a page, otherwise
-+deadlocks caused by memory fragmentation can happen, i.e. mount the
-+volume which is to hold the swapfiles with
-+
-+mount -t nfs -o rsize=2048,wsize=2048 NFS_SERVER_IP:/server_volume /mount_point
-+
-+or set the option in `/etc/fstab'. Read `Documentation/nfsroot.txt' to
-+learn how to set mount options for the root file system, if your swap
-+files are to be located on the root file system.
-+
-+Setting the `rsize' and `wsize' to anything less than PAGE_SIZE is a
-+performance hit, so you probably want to have at least two volumes
-+mounted, one for the swapfiles, one for the rest.
-+
-+You may want to read `Documentation/netswap.txt' as well.
-+
-+Swapfiles on NFS volumes can be treated like any other swapfile,
-+i.e.
-+
-+dd if=/dev/zero of=/swapfiles/SWAPFILE bs=1k count=20480
-+mkswap /swapfiles/SWAPFILE
-+swapon /swapfiles/SWAPFILE
-+
-+will create a 20M swapfile and tell the system to use it. Actually,
-+one could use lseek(2) to create an empty swapfile. This is different
-+from swapfiles located on local harddisk.
-+
-+Swapping over the network is insecure unless the data would be
-+encrypted, which is not the case with NFS. It is also very slow.
-+
-diff -Nurb linux.orig/drivers/block/blkpg.c linux/drivers/block/blkpg.c
---- linux.orig/drivers/block/blkpg.c 2003-07-04 04:11:31.000000000 -0400
-+++ linux/drivers/block/blkpg.c 2004-05-31 02:18:03.000000000 -0400
-@@ -34,7 +34,7 @@
- #include <linux/blk.h> /* for set_device_ro() */
- #include <linux/blkpg.h>
- #include <linux/genhd.h>
--#include <linux/swap.h> /* for is_swap_partition() */
-+#include <linux/swap.h> /* for swap_run_test() */
- #include <linux/module.h> /* for EXPORT_SYMBOL */
-
- #include <asm/uaccess.h>
-@@ -114,6 +114,29 @@
- return 0;
- }
-
-+/* swap_run_test() applies this hook to all swapfiles until it returns
-+ * "1". If it never returns "1", the result of swap_run_test() is "0",
-+ * otherwise "1".
-+ */
-+static int is_swap_partition_hook(unsigned int flags, struct file *swap_file,
-+ void *testdata)
-+{
-+ kdev_t swap_dev = S_ISBLK(swap_file->f_dentry->d_inode->i_mode)
-+ ? swap_file->f_dentry->d_inode->i_rdev : 0;
-+ kdev_t dev = *((kdev_t *)testdata);
-+
-+ if (flags & SWP_USED && dev == swap_dev) {
-+ return 1;
-+ } else {
-+ return 0;
-+ }
-+}
-+
-+static inline int is_swap_partition(kdev_t dev)
-+{
-+ return swap_run_test(is_swap_partition_hook, &dev);
-+}
-+
- /*
- * Delete a partition given by partition number
- *
-diff -Nurb linux.orig/fs/Config.in linux/fs/Config.in
---- linux.orig/fs/Config.in 2004-05-31 02:02:43.000000000 -0400
-+++ linux/fs/Config.in 2004-05-31 02:18:03.000000000 -0400
-@@ -4,6 +4,12 @@
- mainmenu_option next_comment
- comment 'File systems'
-
-+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-+ tristate 'Swapping to block devices' CONFIG_BLKDEV_SWAP
-+else
-+ define_bool CONFIG_BLKDEV_SWAP y
-+fi
-+
- bool 'Quota support' CONFIG_QUOTA
- tristate 'Kernel automounter support' CONFIG_AUTOFS_FS
- tristate 'Kernel automounter version 4 support (also supports v3)' CONFIG_AUTOFS4_FS
-@@ -110,6 +116,12 @@
- dep_tristate 'NFS file system support' CONFIG_NFS_FS $CONFIG_INET
- dep_mbool ' Provide NFSv3 client support' CONFIG_NFS_V3 $CONFIG_NFS_FS
- dep_bool ' Root file system on NFS' CONFIG_ROOT_NFS $CONFIG_NFS_FS $CONFIG_IP_PNP
-+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-+ dep_tristate ' Swapping via NFS (EXPERIMENTAL)' CONFIG_SWAP_VIA_NFS $CONFIG_NFS_FS
-+ if [ "$CONFIG_SWAP_VIA_NFS" = "y" -o "$CONFIG_SWAP_VIA_NFS" = "m" ]; then
-+ define_bool CONFIG_NETSWAP y
-+ fi
-+ fi
-
- dep_tristate 'NFS server support' CONFIG_NFSD $CONFIG_INET
- dep_mbool ' Provide NFSv3 server support' CONFIG_NFSD_V3 $CONFIG_NFSD
-diff -Nurb linux.orig/fs/Makefile linux/fs/Makefile
---- linux.orig/fs/Makefile 2004-05-31 02:02:42.000000000 -0400
-+++ linux/fs/Makefile 2004-05-31 02:18:03.000000000 -0400
-@@ -8,7 +8,7 @@
- O_TARGET := fs.o
-
- export-objs := filesystems.o open.o dcache.o buffer.o
--mod-subdirs := nls
-+mod-subdirs := nls nfs
-
- obj-y := open.o read_write.o devices.o file_table.o buffer.o \
- super.o block_dev.o char_dev.o stat.o exec.o pipe.o namei.o \
-@@ -70,6 +70,7 @@
- subdir-$(CONFIG_JFS_FS) += jfs
- subdir-$(CONFIG_SQUASHFS) += squashfs
-
-+obj-$(CONFIG_BLKDEV_SWAP) += blkdev_swap.o
-
- obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
- obj-$(CONFIG_BINFMT_EM86) += binfmt_em86.o
-diff -Nurb linux.orig/fs/blkdev_swap.c linux/fs/blkdev_swap.c
---- linux.orig/fs/blkdev_swap.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux/fs/blkdev_swap.c 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,309 @@
-+/*
-+ * Swapping to partitions or files located on partitions.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/locks.h>
-+#include <linux/blkdev.h>
-+#include <linux/pagemap.h>
-+#include <linux/swap.h>
-+#include <linux/fs.h>
-+
-+#ifdef DEBUG_BLKDEV_SWAP
-+# define dprintk(fmt...) printk(##fmt)
-+#else
-+# define dprintk(fmt...) do { /* */ } while (0)
-+#endif
-+
-+#define BLKDEV_SWAP_ID "blkdev"
-+#define BLKDEV_FILE_SWAP_ID "blkdev file"
-+
-+/*
-+ * Helper function, copied here from buffer.c
-+ */
-+
-+/*
-+ * Start I/O on a page.
-+ * This function expects the page to be locked and may return
-+ * before I/O is complete. You then have to check page->locked
-+ * and page->uptodate.
-+ *
-+ * brw_page() is SMP-safe, although it's being called with the
-+ * kernel lock held - but the code is ready.
-+ *
-+ * FIXME: we need a swapper_inode->get_block function to remove
-+ * some of the bmap kludges and interface ugliness here.
-+ */
-+int brw_page(int rw, struct page *page, kdev_t dev, int b[], int size)
-+{
-+ struct buffer_head *head, *bh;
-+
-+ if (!PageLocked(page))
-+ panic("brw_page: page not locked for I/O");
-+
-+ if (!page->buffers)
-+ create_empty_buffers(page, dev, size);
-+ head = bh = page->buffers;
-+
-+ /* Stage 1: lock all the buffers */
-+ do {
-+ lock_buffer(bh);
-+ bh->b_blocknr = *(b++);
-+ set_bit(BH_Mapped, &bh->b_state);
-+ set_buffer_async_io(bh);
-+ bh = bh->b_this_page;
-+ } while (bh != head);
-+
-+ /* Stage 2: start the IO */
-+ do {
-+ struct buffer_head *next = bh->b_this_page;
-+ submit_bh(rw, bh);
-+ bh = next;
-+ } while (bh != head);
-+ return 0;
-+}
-+
-+/*
-+ * We implement to methods: swapping to partitions, and swapping to files
-+ * located on partitions.
-+ */
-+
-+struct blkdev_swap_data {
-+ kdev_t dev;
-+};
-+
-+struct test_data {
-+ struct file * filp;
-+ kdev_t dev;
-+};
-+
-+static int is_blkdev_swapping(unsigned int flags,
-+ struct file * swapf,
-+ void *data)
-+{
-+ struct test_data *testdata = (struct test_data *) data;
-+ struct file * filp = testdata->filp;
-+ kdev_t dev = testdata->dev;
-+
-+ /* Only check filp's that don't match the one already opened
-+ * for us by sys_swapon(). Otherwise, we will always flag a
-+ * busy swap file.
-+ */
-+
-+ if (swapf != filp) {
-+ if (dev == swapf->f_dentry->d_inode->i_rdev)
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static int blkdev_swap_open(struct file * filp, void **dptr)
-+{
-+ int swapfilesize;
-+ kdev_t dev;
-+ struct blkdev_swap_data *data;
-+ int error;
-+ struct test_data testdata;
-+
-+ MOD_INC_USE_COUNT;
-+
-+ if (!S_ISBLK(filp->f_dentry->d_inode->i_mode)) {
-+ dprintk(__FUNCTION__": can't handle this swap file: %s\n",
-+ swapf->d_name.name);
-+ error = 0; /* not for us */
-+ goto bad_swap;
-+ }
-+
-+ dev = filp->f_dentry->d_inode->i_rdev;
-+ set_blocksize(dev, PAGE_SIZE);
-+ error = -ENODEV;
-+ if (!dev ||
-+ (blk_size[MAJOR(dev)] && !blk_size[MAJOR(dev)][MINOR(dev)])) {
-+ printk("blkdev_swap_open: blkdev weirdness for %s\n",
-+ filp->f_dentry->d_name.name);
-+ goto bad_swap;
-+ }
-+
-+ /* Check to make sure that we aren't already swapping. */
-+ error = -EBUSY;
-+ testdata.filp = filp;
-+ testdata.dev = dev;
-+ if (swap_run_test(is_blkdev_swapping, &testdata)) {
-+ printk("blkdev_swap_open: already swapping to %s\n",
-+ filp->f_dentry->d_name.name);
-+ goto bad_swap;
-+ }
-+
-+ swapfilesize = 0;
-+ if (blk_size[MAJOR(dev)])
-+ swapfilesize = blk_size[MAJOR(dev)][MINOR(dev)]
-+ >> (PAGE_SHIFT - 10);
-+
-+ if ((data = kmalloc(sizeof(*data), GFP_KERNEL)) == NULL) {
-+ printk("blkdev_swap_open: can't allocate data for %s\n",
-+ filp->f_dentry->d_name.name);
-+ error = -ENOMEM;
-+ goto bad_swap;
-+ }
-+ data->dev = dev;
-+ *dptr = data;
-+
-+ dprintk("blkdev_swap_open: returning %d\n", swapfilesize);
-+ return swapfilesize;
-+
-+ bad_swap:
-+ MOD_DEC_USE_COUNT;
-+ return error; /* this swap thing is not for us */
-+}
-+
-+static int blkdev_swap_release(struct file * filp, void *data)
-+{
-+ dprintk("blkdev_swap_release: releasing swap device %s\n",
-+ filp->f_dentry->d_name.name);
-+ kfree(data);
-+ MOD_DEC_USE_COUNT;
-+ return 0;
-+}
-+
-+static int blkdev_rw_page(int rw, struct page *page, unsigned long offset,
-+ void *ptr)
-+{
-+ struct blkdev_swap_data *data = (struct blkdev_swap_data *)ptr;
-+ brw_page(rw, page, data->dev, (int *)&offset, PAGE_SIZE);
-+ return 1;
-+}
-+
-+static struct swap_ops blkdev_swap_ops = {
-+ blkdev_swap_open,
-+ blkdev_swap_release,
-+ blkdev_rw_page
-+};
-+
-+struct blkdevfile_swap_data {
-+ struct inode *swapf;
-+};
-+
-+static int is_blkdevfile_swapping(unsigned int flags,
-+ struct file * swapf,
-+ void * data)
-+{
-+ struct file * filp = (struct file *) data;
-+
-+ /* Only check filp's that don't match the one already opened
-+ * for us by sys_swapon(). Otherwise, we will always flag a
-+ * busy swap file.
-+ */
-+
-+ if (swapf != filp) {
-+ if (filp->f_dentry->d_inode == swapf->f_dentry->d_inode)
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static int blkdevfile_swap_open(struct file *swapf, void **dptr)
-+{
-+ int error = 0;
-+ int swapfilesize;
-+ struct blkdevfile_swap_data *data;
-+
-+ MOD_INC_USE_COUNT;
-+
-+ /* first check whether this is a regular file located on a local
-+ * hard disk
-+ */
-+ if (!S_ISREG(swapf->f_dentry->d_inode->i_mode)) {
-+ dprintk("blkdevfile_swap_open: "
-+ "can't handle this swap file: %s\n",
-+ swapf->d_name.name);
-+ error = 0; /* not for us */
-+ goto bad_swap;
-+ }
-+ if (!swapf->f_dentry->d_inode->i_mapping->a_ops->bmap) {
-+ dprintk("blkdevfile_swap_open: no bmap for file: %s\n",
-+ swapf->d_name.name);
-+ error = 0; /* not for us */
-+ goto bad_swap;
-+ }
-+
-+ if (swap_run_test(is_blkdevfile_swapping, swapf)) {
-+ dprintk("blkdevfile_swap_open: already swapping to %s\n",
-+ swapf->d_name.name);
-+ error = -EBUSY;
-+ goto bad_swap;
-+ }
-+ swapfilesize = swapf->f_dentry->d_inode->i_size >> PAGE_SHIFT;
-+ if ((data = kmalloc(sizeof(*data), GFP_KERNEL)) == NULL) {
-+ error = -ENOMEM;
-+ goto bad_swap;
-+ }
-+ data->swapf = swapf->f_dentry->d_inode;
-+ *dptr = data;
-+ return swapfilesize;
-+
-+ bad_swap:
-+ MOD_DEC_USE_COUNT;
-+ return error;
-+}
-+
-+static int blkdevfile_swap_release(struct file *swapf, void *data)
-+{
-+ kfree(data);
-+ MOD_DEC_USE_COUNT;
-+ return 0;
-+}
-+
-+static int blkdevfile_rw_page(int rw, struct page *page, unsigned long offset,
-+ void *ptr)
-+{
-+ struct blkdevfile_swap_data *data = (struct blkdevfile_swap_data *)ptr;
-+ struct inode * swapf = data->swapf;
-+ int i, j;
-+ unsigned int block = offset
-+ << (PAGE_SHIFT - swapf->i_sb->s_blocksize_bits);
-+ kdev_t dev = swapf->i_dev;
-+ int block_size;
-+ int zones[PAGE_SIZE/512];
-+ int zones_used;
-+
-+ block_size = swapf->i_sb->s_blocksize;
-+ for (i=0, j=0; j< PAGE_SIZE ; i++, j += block_size)
-+ if (!(zones[i] = bmap(swapf,block++))) {
-+ printk("blkdevfile_rw_page: bad swap file\n");
-+ return 0;
-+ }
-+ zones_used = i;
-+
-+ /* block_size == PAGE_SIZE/zones_used */
-+ brw_page(rw, page, dev, zones, block_size);
-+ return 1;
-+}
-+
-+static struct swap_ops blkdevfile_swap_ops = {
-+ blkdevfile_swap_open,
-+ blkdevfile_swap_release,
-+ blkdevfile_rw_page
-+ };
-+
-+int __init blkdev_swap_init(void)
-+{
-+ (void)register_swap_method(BLKDEV_SWAP_ID, &blkdev_swap_ops);
-+ (void)register_swap_method(BLKDEV_FILE_SWAP_ID, &blkdevfile_swap_ops);
-+ return 0;
-+}
-+
-+void __exit blkdev_swap_exit(void)
-+{
-+ unregister_swap_method(BLKDEV_SWAP_ID);
-+ unregister_swap_method(BLKDEV_FILE_SWAP_ID);
-+}
-+
-+module_init(blkdev_swap_init)
-+module_exit(blkdev_swap_exit)
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Many. Stuffed into a module by cH (Claus-Justus Heine)");
-+MODULE_DESCRIPTION("Swapping to partitions and files on local hard-disks");
-diff -Nurb linux.orig/fs/buffer.c linux/fs/buffer.c
---- linux.orig/fs/buffer.c 2003-07-04 04:12:05.000000000 -0400
-+++ linux/fs/buffer.c 2004-05-31 02:21:05.000000000 -0400
-@@ -743,7 +743,7 @@
- bh->b_private = private;
- }
-
--static void end_buffer_io_async(struct buffer_head * bh, int uptodate)
-+void end_buffer_io_async(struct buffer_head * bh, int uptodate)
- {
- static spinlock_t page_uptodate_lock = SPIN_LOCK_UNLOCKED;
- unsigned long flags;
-@@ -2344,35 +2344,6 @@
- return err;
- }
-
--int brw_page(int rw, struct page *page, kdev_t dev, int b[], int size)
--{
-- struct buffer_head *head, *bh;
--
-- if (!PageLocked(page))
-- panic("brw_page: page not locked for I/O");
--
-- if (!page->buffers)
-- create_empty_buffers(page, dev, size);
-- head = bh = page->buffers;
--
-- /* Stage 1: lock all the buffers */
-- do {
-- lock_buffer(bh);
-- bh->b_blocknr = *(b++);
-- set_bit(BH_Mapped, &bh->b_state);
-- set_buffer_async_io(bh);
-- bh = bh->b_this_page;
-- } while (bh != head);
--
-- /* Stage 2: start the IO */
-- do {
-- struct buffer_head *next = bh->b_this_page;
-- submit_bh(rw, bh);
-- bh = next;
-- } while (bh != head);
-- return 0;
--}
--
- int block_symlink(struct inode *inode, const char *symname, int len)
- {
- struct address_space *mapping = inode->i_mapping;
-diff -Nurb linux.orig/fs/nfs/Makefile linux/fs/nfs/Makefile
---- linux.orig/fs/nfs/Makefile 2003-07-04 04:12:07.000000000 -0400
-+++ linux/fs/nfs/Makefile 2004-05-31 02:18:03.000000000 -0400
-@@ -15,6 +15,14 @@
- obj-$(CONFIG_ROOT_NFS) += nfsroot.o mount_clnt.o
- obj-$(CONFIG_NFS_V3) += nfs3proc.o nfs3xdr.o
-
--obj-m := $(O_TARGET)
-+obj-$(CONFIG_SWAP_VIA_NFS) += nfsswap.o
-+ifeq ($(CONFIG_SWAP_VIA_NFS),m)
-+export-objs := nfs_syms.o
-+obj-y += nfs_syms.o
-+endif
-+
-+ifeq ($(CONFIG_NFS_FS),m)
-+obj-m += $(O_TARGET)
-+endif
-
- include $(TOPDIR)/Rules.make
-diff -Nurb linux.orig/fs/nfs/file.c linux/fs/nfs/file.c
---- linux.orig/fs/nfs/file.c 2003-07-04 04:12:07.000000000 -0400
-+++ linux/fs/nfs/file.c 2004-05-31 02:18:03.000000000 -0400
-@@ -58,11 +58,6 @@
- setattr: nfs_notify_change,
- };
-
--/* Hack for future NFS swap support */
--#ifndef IS_SWAPFILE
--# define IS_SWAPFILE(inode) (0)
--#endif
--
- /*
- * Flush all dirty pages, and check for write errors.
- *
-@@ -217,8 +212,6 @@
- inode->i_ino, (unsigned long) count, (unsigned long) *ppos);
-
- result = -EBUSY;
-- if (IS_SWAPFILE(inode))
-- goto out_swapfile;
- result = nfs_revalidate_inode(NFS_SERVER(inode), inode);
- if (result)
- goto out;
-@@ -230,10 +223,6 @@
- result = generic_file_write(file, buf, count, ppos);
- out:
- return result;
--
--out_swapfile:
-- printk(KERN_INFO "NFS: attempt to write to active swap file!\n");
-- goto out;
- }
-
- /*
-diff -Nurb linux.orig/fs/nfs/nfs_syms.c linux/fs/nfs/nfs_syms.c
---- linux.orig/fs/nfs/nfs_syms.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux/fs/nfs/nfs_syms.c 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,10 @@
-+#include <linux/config.h>
-+#define __NO_VERSION__
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/sunrpc/clnt.h>
-+#include <linux/nfs_fs.h>
-+
-+EXPORT_SYMBOL(__nfs_refresh_inode);
-+EXPORT_SYMBOL(nfs_write_attributes);
-+
-diff -Nurb linux.orig/fs/nfs/nfsswap.c linux/fs/nfs/nfsswap.c
---- linux.orig/fs/nfs/nfsswap.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux/fs/nfs/nfsswap.c 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,350 @@
-+/*
-+ * Swapping to files located on NFS mounted volumes
-+ * Copyright (c) 2000 Claus-Justus Heine
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/swap.h>
-+#include <linux/pagemap.h>
-+#include <linux/file.h>
-+#include <linux/fs.h>
-+#include <linux/socket.h>
-+#include <linux/smp_lock.h>
-+#include <net/netswapping.h>
-+#include <net/sock.h>
-+
-+#include <linux/sunrpc/clnt.h>
-+#include <linux/nfs_fs.h>
-+#include <linux/nfs_fs_sb.h>
-+#include <asm/uaccess.h>
-+
-+#define NFSDBG_FACILITY NFSDBG_SWAP
-+
-+#define NFS_SWAP_ID "nfs file"
-+
-+/* we cache some values here. In principle, we only need the file.
-+ */
-+struct nfs_swap_data {
-+ struct file *file;
-+ struct inode *inode;
-+ struct nfs_server *server;
-+ struct socket *socket;
-+};
-+
-+/* Nearly a clone of nfs_readpage_sync() in read.c, but "struct page" does not
-+ * contain information about the file offset when swapping. So.
-+ */
-+static int nfs_read_swap_page(struct page *page,
-+ struct nfs_server *server,
-+ struct inode *inode,
-+ struct file *file)
-+{
-+ unsigned int rsize = server->rsize;
-+ unsigned int count = PAGE_SIZE;
-+ unsigned int offset = 0; /* always at start of page */
-+ int result, eof;
-+ struct rpc_cred *cred;
-+ struct nfs_fattr fattr;
-+
-+ cred = nfs_file_cred(file);
-+
-+ do {
-+ if (count < rsize)
-+ rsize = count;
-+
-+ lock_kernel();
-+ result = NFS_PROTO(inode)->read(inode, cred,
-+ &fattr,
-+ NFS_RPC_SWAPFLAGS,
-+ offset, rsize, page, &eof);
-+ nfs_refresh_inode(inode, &fattr);
-+ unlock_kernel();
-+
-+ /*
-+ * Even if we had a partial success we can't mark the page
-+ * cache valid.
-+ */
-+ if (result < 0) {
-+ if (result == -EISDIR)
-+ result = -EINVAL;
-+ goto io_error;
-+ }
-+ count -= result;
-+ offset += result;
-+ if (result < rsize) /* NFSv2ism */
-+ break;
-+ } while (count);
-+
-+ if (count) {
-+ char *kaddr = kmap(page);
-+ memset(kaddr + offset, 0, count);
-+ kunmap(page);
-+ }
-+ flush_dcache_page(page);
-+ result = 0;
-+
-+io_error:
-+ return result;
-+}
-+
-+/* Like nfs_writepage_sync(), but when swapping page->index does not encode
-+ * the offset in the swap file alone.
-+ *
-+ */
-+static int nfs_write_swap_page(struct page *page,
-+ struct nfs_server *server,
-+ struct inode *inode,
-+ struct file *file)
-+{
-+ struct rpc_cred *cred;
-+ unsigned int wsize = server->wsize;
-+ unsigned int count = PAGE_SIZE;
-+ unsigned int offset = 0;
-+ int result;
-+ struct nfs_writeverf verf;
-+ struct nfs_fattr fattr;
-+
-+ cred = nfs_file_cred(file);
-+
-+ do {
-+ if (count < wsize)
-+ wsize = count;
-+
-+ lock_kernel();
-+ result = NFS_PROTO(inode)->write(inode, cred, &fattr,
-+ NFS_RW_SWAP|NFS_RW_SYNC,
-+ offset, wsize, page, &verf);
-+ nfs_write_attributes(inode, &fattr);
-+ unlock_kernel();
-+
-+ if (result < 0) {
-+ goto io_error;
-+ }
-+ if (result != wsize)
-+ printk("NFS: short write, wsize=%u, result=%d\n",
-+ wsize, result);
-+ offset += wsize;
-+ count -= wsize;
-+ /*
-+ * If we've extended the file, update the inode
-+ * now so we don't invalidate the cache.
-+ */
-+ if (offset > inode->i_size)
-+ inode->i_size = offset;
-+ } while (count);
-+
-+ result = 0;
-+
-+io_error:
-+
-+ return result;
-+}
-+
-+/* Unluckily (for us) form 2.4.19 -> 2.4.20 the nfs-proc's where
-+ * changed and expect now a proper file-mapping page, where index
-+ * encodes the offset alone.
-+ *
-+ * What we do: we save the original value of page->index, initialize
-+ * page->index to what the NFS/sun-rpc subsystem expects and restore
-+ * the index later.
-+ */
-+static int nfs_rw_swap_page(int rw, struct page *page,
-+ unsigned long offset, void *dptr)
-+{
-+ int error;
-+ struct nfs_swap_data *data = dptr;
-+ unsigned long alloc_flag = current->flags & PF_MEMALLOC;
-+ unsigned long page_index;
-+
-+ if (!PageLocked(page))
-+ panic("nfs_rw_swap_page: page not locked for I/O");
-+
-+ /* prevent memory deadlocks */
-+ if (!(current->flags & PF_MEMALLOC)) {
-+ dprintk("nfs_rw_swap_page: Setting PF_MEMALLOC\n");
-+ }
-+ current->flags |= PF_MEMALLOC;
-+
-+ /* now tweak the page->index field ... */
-+ page_index = page->index;
-+ page->index = ((loff_t)offset*(loff_t)PAGE_SIZE) >> PAGE_CACHE_SHIFT;
-+
-+ if (rw == WRITE) {
-+ error = nfs_write_swap_page(page,
-+ data->server,
-+ data->inode,
-+ data->file);
-+ } else {
-+ error = nfs_read_swap_page(page,
-+ data->server,
-+ data->inode,
-+ data->file);
-+ }
-+
-+ if (!alloc_flag) {
-+ current->flags &= ~PF_MEMALLOC;
-+ }
-+
-+ /* now restore the page->index field ... */
-+ page->index = page_index;
-+
-+ if (error) {
-+ /* Must mark the page invalid after I/O error */
-+ SetPageError(page);
-+ ClearPageUptodate(page);
-+ } else {
-+ ClearPageError(page);
-+ SetPageUptodate(page);
-+ }
-+
-+ if (!error) { /* in case of an error rw_swap_page() likes to unlock
-+ * itself.
-+ */
-+ UnlockPage(page);
-+ }
-+
-+ return error < 0 ? 0 : 1;
-+}
-+
-+static int is_nfsfile_swapping(unsigned int flags,
-+ struct file * swapf,
-+ void * data)
-+{
-+ struct file * filp = (struct file *) data;
-+
-+ /* Only check filp's that don't match the one already opened
-+ * for us by sys_swapon(). Otherwise, we will always flag a
-+ * busy swap file.
-+ */
-+
-+ if (swapf != filp) {
-+ if (filp->f_dentry->d_inode == swapf->f_dentry->d_inode)
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static int nfs_swap_open(struct file *swapf, void **dptr)
-+{
-+ int error = 0;
-+ int swapfilesize;
-+ struct nfs_swap_data *data;
-+ int on = 1;
-+ mm_segment_t fs;
-+ struct inode *inode = swapf->f_dentry->d_inode;
-+
-+ MOD_INC_USE_COUNT;
-+
-+ if (!S_ISREG(inode->i_mode)) {
-+ dprintk("nfs_swap_open: can't handle this swap file: %s\n",
-+ swapf->f_dentry->d_name.name);
-+ error = 0; /* not for us */
-+ goto bad_swap;
-+ }
-+ /* determine whether this file really is located on an NFS mounted
-+ * volume
-+ */
-+ if (!inode->i_sb || inode->i_sb->s_magic != NFS_SUPER_MAGIC) {
-+ dprintk("nfs_swap_open: %s is not an NFS file.\n",
-+ swapf->f_dentry->d_name.name);
-+ error = 0; /* not for us */
-+ goto bad_swap;
-+ }
-+
-+ if (swap_run_test(is_nfsfile_swapping, swapf)) {
-+ dprintk("nfs_swap_open: already swapping to %s\n",
-+ swapf->f_dentry->d_name.name);
-+ error = -EBUSY;
-+ goto bad_swap;
-+ }
-+ swapfilesize = inode->i_size >> PAGE_SHIFT;
-+ if ((data = kmalloc(sizeof(*data), GFP_KERNEL)) == NULL) {
-+ error = -ENOMEM;
-+ goto bad_swap;
-+ }
-+ data->file = swapf;
-+ data->inode = inode;
-+ data->server = NFS_SERVER(inode);
-+ data->socket = data->server->client->cl_xprt->sock;
-+
-+ /* set socket option SO_SWAPPING */
-+ fs = get_fs();
-+ set_fs(KERNEL_DS);
-+ error = sock_setsockopt(data->socket, SOL_SOCKET, SO_SWAPPING,
-+ (char *)&on, sizeof(on));
-+ set_fs(fs);
-+ if (error) {
-+ dprintk("nfs_swap_open: error setting SO_SWAPPING\n");
-+ goto bad_swap_2;
-+ }
-+
-+ *dptr = data;
-+ return swapfilesize;
-+
-+ bad_swap_2:
-+ kfree(data);
-+ bad_swap:
-+ MOD_DEC_USE_COUNT;
-+ return error;
-+}
-+
-+static int nfs_swap_release(struct file *swapf, void *dptr)
-+{
-+ struct nfs_swap_data *data = (struct nfs_swap_data *)dptr;
-+ int off = 0;
-+ mm_segment_t fs;
-+ int error;
-+
-+#if 1
-+ if (swapf != data->file ||
-+ swapf->f_dentry->d_inode != data->inode ||
-+ !swapf->f_dentry->d_inode->i_sb ||
-+ swapf->f_dentry->d_inode->i_sb->s_magic != NFS_SUPER_MAGIC ||
-+ NFS_SERVER(swapf->f_dentry->d_inode) != data->server ||
-+ data->socket != data->server->client->cl_xprt->sock) {
-+ panic("nfs_swap_release: nfs swap data messed up");
-+ }
-+#endif
-+
-+ /* remove socket option SO_SWAPPING */
-+ fs = get_fs();
-+ set_fs(KERNEL_DS);
-+ error = sock_setsockopt(data->socket, SOL_SOCKET, SO_SWAPPING,
-+ (char *)&off, sizeof(off));
-+ set_fs(fs);
-+ if (error) {
-+ dprintk("nfs_swap_open: error clearing SO_SWAPPING\n");
-+ }
-+ kfree(data);
-+ MOD_DEC_USE_COUNT;
-+ return error;
-+}
-+
-+static struct swap_ops nfs_swap_ops = {
-+ open: nfs_swap_open,
-+ release: nfs_swap_release,
-+ rw_page: nfs_rw_swap_page
-+};
-+
-+int __init nfs_swap_init(void)
-+{
-+ (void)register_swap_method(NFS_SWAP_ID, &nfs_swap_ops);
-+ return 0;
-+}
-+
-+void __exit nfs_swap_exit(void)
-+{
-+ unregister_swap_method(NFS_SWAP_ID);
-+}
-+
-+module_init(nfs_swap_init)
-+module_exit(nfs_swap_exit)
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("(c) 1996-2002 cH (Claus-Justus Heine)");
-+MODULE_DESCRIPTION("Swapping to files located on volumes mounted via NFS");
-diff -Nurb linux.orig/fs/nfs/read.c linux/fs/nfs/read.c
---- linux.orig/fs/nfs/read.c 2003-07-04 04:12:08.000000000 -0400
-+++ linux/fs/nfs/read.c 2004-05-31 02:18:03.000000000 -0400
-@@ -50,11 +50,6 @@
- */
- static void nfs_readpage_result(struct rpc_task *task);
-
--/* Hack for future NFS swap support */
--#ifndef IS_SWAPFILE
--# define IS_SWAPFILE(inode) (0)
--#endif
--
- static kmem_cache_t *nfs_rdata_cachep;
-
- static __inline__ struct nfs_read_data *nfs_readdata_alloc(void)
-@@ -92,7 +87,6 @@
- int rsize = NFS_SERVER(inode)->rsize;
- int result;
- int count = PAGE_CACHE_SIZE;
-- int flags = IS_SWAPFILE(inode)? NFS_RPC_SWAPFLAGS : 0;
- int eof;
-
- dprintk("NFS: nfs_readpage_sync(%p)\n", page);
-@@ -114,7 +108,7 @@
- offset, rsize, page);
-
- lock_kernel();
-- result = NFS_PROTO(inode)->read(inode, cred, &fattr, flags,
-+ result = NFS_PROTO(inode)->read(inode, cred, &fattr, 0,
- offset, rsize, page, &eof);
- nfs_refresh_inode(inode, &fattr);
- unlock_kernel();
-@@ -246,7 +240,7 @@
- task = &data->task;
-
- /* N.B. Do we need to test? Never called for swapfile inode */
-- flags = RPC_TASK_ASYNC | (IS_SWAPFILE(inode)? NFS_RPC_SWAPFLAGS : 0);
-+ flags = RPC_TASK_ASYNC;
-
- nfs_read_rpcsetup(head, data);
-
-@@ -476,8 +470,6 @@
- }
-
- error = nfs_readpage_sync(file, inode, page);
-- if (error < 0 && IS_SWAPFILE(inode))
-- printk("Aiee.. nfs swap-in of page failed!\n");
- out:
- return error;
-
-diff -Nurb linux.orig/fs/nfs/write.c linux/fs/nfs/write.c
---- linux.orig/fs/nfs/write.c 2003-07-04 04:12:08.000000000 -0400
-+++ linux/fs/nfs/write.c 2004-05-31 02:20:47.000000000 -0400
-@@ -3,7 +3,6 @@
- #include <linux/config.h>
- #include <linux/types.h>
- #include <linux/slab.h>
--#include <linux/swap.h>
- #include <linux/pagemap.h>
- #include <linux/file.h>
-
-@@ -46,11 +45,6 @@
- static void nfs_commit_done(struct rpc_task *);
- #endif
-
--/* Hack for future NFS swap support */
--#ifndef IS_SWAPFILE
--# define IS_SWAPFILE(inode) (0)
--#endif
--
- static kmem_cache_t *nfs_wdata_cachep;
-
- static __inline__ struct nfs_write_data *nfs_writedata_alloc(void)
-@@ -82,7 +76,7 @@
- * For the moment, we just call nfs_refresh_inode().
- */
- static __inline__ int
--nfs_write_attributes(struct inode *inode, struct nfs_fattr *fattr)
-+__nfs_write_attributes(struct inode *inode, struct nfs_fattr *fattr)
- {
- if ((fattr->valid & NFS_ATTR_FATTR) && !(fattr->valid & NFS_ATTR_WCC)) {
- fattr->pre_size = NFS_CACHE_ISIZE(inode);
-@@ -93,6 +87,11 @@
- return nfs_refresh_inode(inode, fattr);
- }
-
-+int nfs_write_attributes(struct inode *inode, struct nfs_fattr *fattr)
-+{
-+ return __nfs_write_attributes(inode, fattr);
-+}
-+
- /*
- * Write a page synchronously.
- * Offset is the data offset within the page.
-@@ -104,8 +103,7 @@
- struct rpc_cred *cred = NULL;
- loff_t base;
- unsigned int wsize = NFS_SERVER(inode)->wsize;
-- int result, refresh = 0, written = 0, flags;
-- u8 *buffer;
-+ int result, refresh = 0, written = 0;
- struct nfs_fattr fattr;
- struct nfs_writeverf verf;
-
-@@ -121,15 +119,14 @@
-
- base = page_offset(page) + offset;
-
-- flags = ((IS_SWAPFILE(inode)) ? NFS_RW_SWAP : 0) | NFS_RW_SYNC;
--
- do {
-- if (count < wsize && !IS_SWAPFILE(inode))
-+ if (count < wsize)
- wsize = count;
-
-- result = NFS_PROTO(inode)->write(inode, cred, &fattr, flags,
-+ result = NFS_PROTO(inode)->write(inode, cred, &fattr,
-+ NFS_RW_SYNC,
- offset, wsize, page, &verf);
-- nfs_write_attributes(inode, &fattr);
-+ __nfs_write_attributes(inode, &fattr);
-
- if (result < 0) {
- /* Must mark the page invalid after I/O error */
-@@ -140,7 +137,6 @@
- printk("NFS: short write, wsize=%u, result=%d\n",
- wsize, result);
- refresh = 1;
-- buffer += wsize;
- base += wsize;
- offset += wsize;
- written += wsize;
-@@ -979,7 +975,7 @@
- }
- #endif
-
-- nfs_write_attributes(inode, resp->fattr);
-+ __nfs_write_attributes(inode, resp->fattr);
- while (!list_empty(&data->pages)) {
- req = nfs_list_entry(data->pages.next);
- nfs_list_remove_request(req);
-@@ -1133,7 +1129,7 @@
- if (nfs_async_handle_jukebox(task))
- return;
-
-- nfs_write_attributes(inode, resp->fattr);
-+ __nfs_write_attributes(inode, resp->fattr);
- while (!list_empty(&data->pages)) {
- req = nfs_list_entry(data->pages.next);
- nfs_list_remove_request(req);
-diff -Nurb linux.orig/include/linux/fs.h linux/include/linux/fs.h
---- linux.orig/include/linux/fs.h 2004-05-31 02:06:19.000000000 -0400
-+++ linux/include/linux/fs.h 2004-05-31 02:18:03.000000000 -0400
-@@ -1500,6 +1500,10 @@
- extern int inode_change_ok(struct inode *, struct iattr *);
- extern int inode_setattr(struct inode *, struct iattr *);
-
-+/* for swapping to block devices */
-+void create_empty_buffers(struct page *page, kdev_t dev, unsigned long blocksize);
-+void end_buffer_io_async(struct buffer_head * bh, int uptodate);
-+
- /*
- * Common dentry functions for inclusion in the VFS
- * or in other stackable file systems. Some of these
-diff -Nurb linux.orig/include/linux/nfs_fs.h linux/include/linux/nfs_fs.h
---- linux.orig/include/linux/nfs_fs.h 2004-05-31 02:06:28.000000000 -0400
-+++ linux/include/linux/nfs_fs.h 2004-05-31 02:18:03.000000000 -0400
-@@ -40,8 +40,8 @@
- */
- #define NFS_MAX_DIRCACHE 16
-
--#define NFS_MAX_FILE_IO_BUFFER_SIZE 32768
--#define NFS_DEF_FILE_IO_BUFFER_SIZE 4096
-+#define NFS_MAX_FILE_IO_BUFFER_SIZE (8*PAGE_SIZE)
-+#define NFS_DEF_FILE_IO_BUFFER_SIZE PAGE_SIZE
-
- /*
- * The upper limit on timeouts for the exponential backoff algorithm.
-@@ -205,6 +205,8 @@
- extern int nfs_writepage(struct page *);
- extern int nfs_flush_incompatible(struct file *file, struct page *page);
- extern int nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
-+extern int nfs_write_attributes(struct inode *inode, struct nfs_fattr *fattr);
-+
- /*
- * Try to write back everything synchronously (but check the
- * return value!)
-@@ -375,6 +377,7 @@
- #define NFSDBG_XDR 0x0020
- #define NFSDBG_FILE 0x0040
- #define NFSDBG_ROOT 0x0080
-+#define NFSDBG_SWAP 0x0100
- #define NFSDBG_ALL 0xFFFF
-
- #ifdef __KERNEL__
-diff -Nurb linux.orig/include/linux/slab.h linux/include/linux/slab.h
---- linux.orig/include/linux/slab.h 2004-05-31 02:06:19.000000000 -0400
-+++ linux/include/linux/slab.h 2004-05-31 02:18:03.000000000 -0400
-@@ -39,6 +39,7 @@
- #define SLAB_HWCACHE_ALIGN 0x00002000UL /* align objs on a h/w cache lines */
- #define SLAB_CACHE_DMA 0x00004000UL /* use GFP_DMA memory */
- #define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* force alignment */
-+#define SLAB_LOW_GFP_ORDER 0x00010000UL /* use as low a gfp order as possible */
-
- /* flags passed to a constructor func */
- #define SLAB_CTOR_CONSTRUCTOR 0x001UL /* if not set, then deconstructor */
-diff -Nurb linux.orig/include/linux/swap.h linux/include/linux/swap.h
---- linux.orig/include/linux/swap.h 2004-05-31 02:06:19.000000000 -0400
-+++ linux/include/linux/swap.h 2004-05-31 02:18:03.000000000 -0400
-@@ -58,15 +58,29 @@
- #define SWAP_MAP_MAX 0x7fff
- #define SWAP_MAP_BAD 0x8000
-
-+struct swap_ops {
-+ int (*open)(struct file *swapf, void **data);
-+ int (*release)(struct file *swapf, void *data);
-+ int (*rw_page)(int rw,
-+ struct page *page, unsigned long offset, void *data);
-+};
-+
-+struct swap_method {
-+ struct swap_method *next;
-+ char * name;
-+ struct swap_ops *ops;
-+ int use_count;
-+};
-+
- /*
- * The in-memory structure used to track swap areas.
- */
- struct swap_info_struct {
- unsigned int flags;
-- kdev_t swap_device;
-+ struct file *swap_file;
-+ struct swap_method *method;
-+ void *data;
- spinlock_t sdev_lock;
-- struct dentry * swap_file;
-- struct vfsmount *swap_vfsmnt;
- unsigned short * swap_map;
- unsigned int lowest_bit;
- unsigned int highest_bit;
-@@ -141,11 +155,15 @@
- extern int total_swap_pages;
- extern unsigned int nr_swapfiles;
- extern struct swap_info_struct swap_info[];
--extern int is_swap_partition(kdev_t);
-+extern int register_swap_method(char *name, struct swap_ops *ops);
-+extern int unregister_swap_method(char *name);
-+extern int swap_run_test(int (*test_fct)(unsigned int flags,
-+ struct file *swap_file,
-+ void *testdata), void *testdata);
- extern void si_swapinfo(struct sysinfo *);
- extern swp_entry_t get_swap_page(void);
--extern void get_swaphandle_info(swp_entry_t, unsigned long *, kdev_t *,
-- struct inode **);
-+struct swap_method *get_swaphandle_info(swp_entry_t entry,
-+ unsigned long *offset, void **data);
- extern int swap_duplicate(swp_entry_t);
- extern int swap_count(struct page *);
- extern int valid_swaphandles(swp_entry_t, unsigned long *);
-diff -Nurb linux.orig/include/net/netswapping.h linux/include/net/netswapping.h
---- linux.orig/include/net/netswapping.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux/include/net/netswapping.h 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,47 @@
-+#ifndef _LINUX_NETSWAPPING_H
-+#define _LINUX_NETSWAPPING_H
-+
-+#include <linux/swap.h>
-+#include <linux/init.h>
-+
-+/* It is a mess. Socket options are defined in asm-ARCH/socket.h */
-+
-+#define SO_SWAPPING 0x00100000 /* hopefully not used by anybody else */
-+
-+#ifdef __KERNEL__
-+
-+#define CTL_NETSWAP 0x00100000
-+
-+enum {
-+ NET_SWAP_DROPPED = 1,
-+ NET_SWAP_DROP_THRESHOLD = 2,
-+ NET_SWAP_SOCK_COUNT = 3
-+};
-+
-+extern unsigned int netswap_free_pages_min;
-+extern int netswap_sock_count;
-+extern unsigned int netswap_dropped;
-+
-+/* this is "#defined" and not inline because sock.h includes us, but we need
-+ * the "struct sock" definition.
-+ */
-+#define netswap_low_memory(sk, skb) \
-+({ \
-+ int _ret = 0; \
-+ \
-+ if (netswap_sock_count > 0 && /* anybody swapping via network? */ \
-+ !(sk)->swapping && /* but we are not needed for swapping */ \
-+ nr_free_pages() < netswap_free_pages_min) { /* so drop us */ \
-+ printk("netswap_low_memory: " \
-+ "dropping skb 0x%p@0x%p\n", skb, sk); \
-+ netswap_dropped ++; \
-+ _ret = 1; \
-+ } \
-+ _ret; \
-+})
-+
-+extern int __init netswap_init(void);
-+
-+#endif
-+
-+#endif
-diff -Nurb linux.orig/include/net/sock.h linux/include/net/sock.h
---- linux.orig/include/net/sock.h 2004-05-31 02:07:17.000000000 -0400
-+++ linux/include/net/sock.h 2004-05-31 02:18:03.000000000 -0400
-@@ -103,6 +103,10 @@
- #include <linux/filter.h>
- #endif
-
-+#ifdef CONFIG_NETSWAP
-+#include <net/netswapping.h>
-+#endif
-+
- #include <asm/atomic.h>
- #include <net/dst.h>
-
-@@ -536,6 +540,12 @@
- no_check,
- broadcast,
- bsdism;
-+#ifdef CONFIG_NETSWAP
-+ /* Increased by SO_SWAPPING with arg != 0, decreased by
-+ * SO_SWAPPING with arg 0
-+ */
-+ int swapping;
-+#endif
- unsigned char debug;
- unsigned char rcvtstamp;
- unsigned char use_write_queue;
-@@ -1165,6 +1175,11 @@
- return err; /* Toss packet */
- }
- #endif /* CONFIG_FILTER */
-+#ifdef CONFIG_NETSWAP
-+ /* an inline function defined in net/netswapping.h */
-+ if (netswap_low_memory(sk, skb))
-+ return -ENOMEM;
-+#endif /* CONFIG_NETSWAP */
-
- skb->dev = NULL;
- skb_set_owner_r(skb, sk);
-diff -Nurb linux.orig/kernel/ksyms.c linux/kernel/ksyms.c
---- linux.orig/kernel/ksyms.c 2004-05-31 02:02:43.000000000 -0400
-+++ linux/kernel/ksyms.c 2004-05-31 02:18:03.000000000 -0400
-@@ -41,6 +41,7 @@
- #include <linux/mm.h>
- #include <linux/capability.h>
- #include <linux/highuid.h>
-+#include <linux/swapctl.h>
- #include <linux/brlock.h>
- #include <linux/fs.h>
- #include <linux/tty.h>
-@@ -127,6 +128,11 @@
- EXPORT_SYMBOL(kmap_prot);
- EXPORT_SYMBOL(kmap_pte);
- #endif
-+EXPORT_SYMBOL(nr_free_pages);
-+/* EXPORT_SYMBOL(freepages); */
-+EXPORT_SYMBOL(register_swap_method);
-+EXPORT_SYMBOL(unregister_swap_method);
-+EXPORT_SYMBOL(swap_run_test);
-
- /* filesystem internal functions */
- EXPORT_SYMBOL(def_blk_fops);
-@@ -531,7 +537,7 @@
- EXPORT_SYMBOL(make_bad_inode);
- EXPORT_SYMBOL(is_bad_inode);
- EXPORT_SYMBOL(event);
--EXPORT_SYMBOL(brw_page);
-+EXPORT_SYMBOL(end_buffer_io_async);
- EXPORT_SYMBOL(__inode_dir_notify);
-
- #ifdef CONFIG_UID16
-diff -Nurb linux.orig/mm/page_io.c linux/mm/page_io.c
---- linux.orig/mm/page_io.c 2003-07-04 04:12:29.000000000 -0400
-+++ linux/mm/page_io.c 2004-05-31 02:18:03.000000000 -0400
-@@ -36,11 +36,8 @@
- static int rw_swap_page_base(int rw, swp_entry_t entry, struct page *page)
- {
- unsigned long offset;
-- int zones[PAGE_SIZE/512];
-- int zones_used;
-- kdev_t dev = 0;
-- int block_size;
-- struct inode *swapf = 0;
-+ struct swap_method *method;
-+ void *data;
-
- if (rw == READ) {
- ClearPageUptodate(page);
-@@ -48,30 +45,11 @@
- } else
- kstat.pswpout++;
-
-- get_swaphandle_info(entry, &offset, &dev, &swapf);
-- if (dev) {
-- zones[0] = offset;
-- zones_used = 1;
-- block_size = PAGE_SIZE;
-- } else if (swapf) {
-- int i, j;
-- unsigned int block = offset
-- << (PAGE_SHIFT - swapf->i_sb->s_blocksize_bits);
--
-- block_size = swapf->i_sb->s_blocksize;
-- for (i=0, j=0; j< PAGE_SIZE ; i++, j += block_size)
-- if (!(zones[i] = bmap(swapf,block++))) {
-- printk("rw_swap_page: bad swap file\n");
-- return 0;
-- }
-- zones_used = i;
-- dev = swapf->i_dev;
-- } else {
-+ method = get_swaphandle_info(entry, &offset, &data);
-+ if (!method || !method->ops->rw_page(rw, page, offset, data)) {
- return 0;
- }
-
-- /* block_size == PAGE_SIZE/zones_used */
-- brw_page(rw, page, dev, zones, block_size);
- return 1;
- }
-
-diff -Nurb linux.orig/mm/slab.c linux/mm/slab.c
---- linux.orig/mm/slab.c 2003-07-04 04:12:29.000000000 -0400
-+++ linux/mm/slab.c 2004-05-31 02:18:03.000000000 -0400
-@@ -111,10 +111,12 @@
- # define CREATE_MASK (SLAB_DEBUG_INITIAL | SLAB_RED_ZONE | \
- SLAB_POISON | SLAB_HWCACHE_ALIGN | \
- SLAB_NO_REAP | SLAB_CACHE_DMA | \
-- SLAB_MUST_HWCACHE_ALIGN)
-+ SLAB_MUST_HWCACHE_ALIGN | \
-+ SLAB_LOW_GFP_ORDER)
- #else
- # define CREATE_MASK (SLAB_HWCACHE_ALIGN | SLAB_NO_REAP | \
-- SLAB_CACHE_DMA | SLAB_MUST_HWCACHE_ALIGN)
-+ SLAB_CACHE_DMA | SLAB_MUST_HWCACHE_ALIGN | \
-+ SLAB_LOW_GFP_ORDER)
- #endif
-
- /*
-@@ -247,8 +249,13 @@
- };
-
- /* internal c_flags */
--#define CFLGS_OFF_SLAB 0x010000UL /* slab management in own cache */
--#define CFLGS_OPTIMIZE 0x020000UL /* optimized slab lookup */
-+#define CFLGS_OFF_SLAB 0x020000UL /* slab management in own cache */
-+#define CFLGS_OPTIMIZE 0x040000UL /* optimized slab lookup */
-+#define CFLGS_MASK (CFLGS_OFF_SLAB | CFLGS_OPTIMIZE)
-+
-+#if (CFLGS_MASK & CREATE_MASK)
-+# error BUG: internal and external SLAB flags overlap
-+#endif
-
- /* c_dflags (dynamic flags). Need to hold the spinlock to access this member */
- #define DFLGS_GROWN 0x000001UL /* don't reap a recently grown */
-@@ -452,7 +459,12 @@
- snprintf(name, sizeof(name), "size-%Zd",sizes->cs_size);
- if (!(sizes->cs_cachep =
- kmem_cache_create(name, sizes->cs_size,
-- 0, SLAB_HWCACHE_ALIGN, NULL, NULL))) {
-+ 0,
-+#if CONFIG_NETSWAP
-+ SLAB_LOW_GFP_ORDER| /* sorry */
-+#endif
-+ SLAB_HWCACHE_ALIGN,
-+ NULL, NULL))) {
- BUG();
- }
-
-@@ -731,6 +743,8 @@
- break;
- if (!cachep->num)
- goto next;
-+ if (cachep->gfporder == 0 && (flags & SLAB_LOW_GFP_ORDER))
-+ break;
- if (flags & CFLGS_OFF_SLAB && cachep->num > offslab_limit) {
- /* Oops, this num of objs will cause problems. */
- cachep->gfporder--;
-diff -Nurb linux.orig/mm/swapfile.c linux/mm/swapfile.c
---- linux.orig/mm/swapfile.c 2003-07-04 04:12:29.000000000 -0400
-+++ linux/mm/swapfile.c 2004-05-31 02:18:03.000000000 -0400
-@@ -11,12 +11,17 @@
- #include <linux/swap.h>
- #include <linux/swapctl.h>
- #include <linux/blkdev.h> /* for blk_size */
-+#include <linux/file.h>
- #include <linux/vmalloc.h>
- #include <linux/pagemap.h>
- #include <linux/shm.h>
-
- #include <asm/pgtable.h>
-
-+#ifdef CONFIG_KMOD
-+#include <linux/kmod.h>
-+#endif
-+
- spinlock_t swaplock = SPIN_LOCK_UNLOCKED;
- unsigned int nr_swapfiles;
- int total_swap_pages;
-@@ -31,8 +36,78 @@
-
- struct swap_info_struct swap_info[MAX_SWAPFILES];
-
-+static struct swap_method *swap_methods = NULL;
-+
- #define SWAPFILE_CLUSTER 256
-
-+int register_swap_method(char *name, struct swap_ops *ops)
-+{
-+ struct swap_method *pos;
-+ struct swap_method *new;
-+ int result = 0;
-+
-+ lock_kernel();
-+
-+ for (pos = swap_methods; pos; pos = pos->next) {
-+ if (strcmp(pos->name, name) == 0) {
-+ printk(KERN_ERR "register_swap_method: "
-+ "method %s already registered\n", name);
-+ result = -EBUSY;
-+ goto out;
-+ }
-+ }
-+
-+ if (!(new = kmalloc(sizeof(*new), GFP_KERNEL))) {
-+ printk(KERN_ERR "register_swap_method: "
-+ "no memory for new method \"%s\"\n", name);
-+ result = -ENOMEM;
-+ goto out;
-+ }
-+
-+ new->name = name;
-+ new->ops = ops;
-+ new->use_count = 0;
-+
-+ /* ok, insert at top of list */
-+ printk("register_swap_method: method %s\n", name);
-+ new->next = swap_methods;
-+ swap_methods = new;
-+ out:
-+ unlock_kernel();
-+ return result;
-+}
-+
-+int unregister_swap_method(char *name)
-+{
-+ struct swap_method **method, *next;
-+ int result = 0;
-+
-+ lock_kernel();
-+
-+ for (method = &swap_methods; *method; method = &(*method)->next) {
-+ if (strcmp((*method)->name, name) == 0) {
-+ if ((*method)->use_count > 0) {
-+ printk(KERN_ERR "unregister_swap_method: "
-+ "method \"%s\" is in use\n", name);
-+ result = -EBUSY;
-+ goto out;
-+ }
-+
-+ next = (*method)->next;
-+ kfree(*method);
-+ *method = next;
-+ printk("unregister_swap_method: method %s\n", name);
-+ goto out;
-+ }
-+ }
-+ /* not found */
-+ printk("unregister_swap_method: no such method %s\n", name);
-+ result = -ENOENT;
-+ out:
-+ unlock_kernel();
-+ return result;
-+}
-+
- static inline int scan_swap_map(struct swap_info_struct *si)
- {
- unsigned long offset;
-@@ -711,13 +786,14 @@
- struct nameidata nd;
- int i, type, prev;
- int err;
-+ struct file *swap_file;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- err = user_path_walk(specialfile, &nd);
- if (err)
-- goto out;
-+ return err;
-
- lock_kernel();
- prev = -1;
-@@ -725,15 +801,20 @@
- for (type = swap_list.head; type >= 0; type = swap_info[type].next) {
- p = swap_info + type;
- if ((p->flags & SWP_WRITEOK) == SWP_WRITEOK) {
-- if (p->swap_file == nd.dentry)
-+ if (p->swap_file &&
-+ p->swap_file->f_dentry == nd.dentry)
- break;
- }
- prev = type;
- }
- err = -EINVAL;
-+ /* p->swap_file contains all needed info, no need to keep nd, so
-+ * release it now.
-+ */
-+ path_release(&nd);
- if (type < 0) {
- swap_list_unlock();
-- goto out_dput;
-+ goto out;
- }
-
- if (prev < 0) {
-@@ -767,32 +848,30 @@
- total_swap_pages += p->pages;
- p->flags = SWP_WRITEOK;
- swap_list_unlock();
-- goto out_dput;
-+ goto out;
- }
-- if (p->swap_device)
-- blkdev_put(p->swap_file->d_inode->i_bdev, BDEV_SWAP);
-- path_release(&nd);
-
-+ if (p->method->ops->release)
-+ p->method->ops->release(p->swap_file, p->data);
- swap_list_lock();
- swap_device_lock(p);
-- nd.mnt = p->swap_vfsmnt;
-- nd.dentry = p->swap_file;
-- p->swap_vfsmnt = NULL;
-+ p->method->use_count --;
-+ p->method = NULL;
-+ p->data = NULL;
-+ swap_file = p->swap_file;
- p->swap_file = NULL;
-- p->swap_device = 0;
- p->max = 0;
- swap_map = p->swap_map;
- p->swap_map = NULL;
- p->flags = 0;
- swap_device_unlock(p);
- swap_list_unlock();
-+ filp_close(swap_file, NULL);
- vfree(swap_map);
- err = 0;
-
--out_dput:
-- unlock_kernel();
-- path_release(&nd);
- out:
-+ unlock_kernel();
- return err;
- }
-
-@@ -805,18 +884,17 @@
- if (!page)
- return -ENOMEM;
-
-- len += sprintf(buf, "Filename\t\t\tType\t\tSize\tUsed\tPriority\n");
-+ len += sprintf(buf, "%-32s%-16s%-8s%-8sPriority\n",
-+ "Filename", "Type", "Size", "Used");
- for (i = 0 ; i < nr_swapfiles ; i++, ptr++) {
- if ((ptr->flags & SWP_USED) && ptr->swap_map) {
-- char * path = d_path(ptr->swap_file, ptr->swap_vfsmnt,
-+ char * path = d_path(ptr->swap_file->f_dentry,
-+ ptr->swap_file->f_vfsmnt,
- page, PAGE_SIZE);
-
- len += sprintf(buf + len, "%-31s ", path);
-
-- if (!ptr->swap_device)
-- len += sprintf(buf + len, "file\t\t");
-- else
-- len += sprintf(buf + len, "partition\t");
-+ len += sprintf(buf + len, "%-15s ", ptr->method->name);
-
- usedswap = 0;
- for (j = 0; j < ptr->max; ++j)
-@@ -827,7 +905,7 @@
- default:
- usedswap++;
- }
-- len += sprintf(buf + len, "%d\t%d\t%d\n", ptr->pages << (PAGE_SHIFT - 10),
-+ len += sprintf(buf + len, "%-8d%-8d%d\n", ptr->pages << (PAGE_SHIFT - 10),
- usedswap << (PAGE_SHIFT - 10), ptr->prio);
- }
- }
-@@ -835,18 +913,55 @@
- return len;
- }
-
--int is_swap_partition(kdev_t dev) {
-+/* apply a test function to all active swap objects. E.g. for checking
-+ * whether a partition is used for swapping
-+ */
-+int swap_run_test(int (*test_fct)(unsigned int flags,
-+ struct file * swap_file,
-+ void *testdata), void *testdata)
-+{
- struct swap_info_struct *ptr = swap_info;
- int i;
-
- for (i = 0 ; i < nr_swapfiles ; i++, ptr++) {
-- if (ptr->flags & SWP_USED)
-- if (ptr->swap_device == dev)
-+ if (ptr->swap_file &&
-+ test_fct(ptr->flags, ptr->swap_file, testdata))
- return 1;
- }
- return 0;
- }
-
-+/* Walk through the list of known swap method until somebody wants to
-+ * handle this file. Pick the first one which claims to be able to
-+ * swap to this kind of file.
-+ *
-+ * return value: < 0: error, 0: not found, > 0: swapfilesize
-+ */
-+int find_swap_method(struct file *swap_file,
-+ struct swap_info_struct *p)
-+{
-+ int swapfilesize = 0;
-+ struct swap_method *method;
-+
-+ p->method = NULL;
-+ for (method = swap_methods; method; method = method->next) {
-+ swapfilesize = method->ops->open(swap_file, &p->data);
-+ if (swapfilesize == 0) {
-+ continue;
-+ }
-+ if (swapfilesize > 0) {
-+ p->method = method;
-+ p->method->use_count ++;
-+ p->swap_file = swap_file;
-+ break;
-+ }
-+ if (swapfilesize < 0) {
-+ break;
-+ }
-+ }
-+ return swapfilesize;
-+}
-+
- /*
- * Written 01/25/92 by Simmule Turner, heavily changed by Linus.
- *
-@@ -855,8 +970,6 @@
- asmlinkage long sys_swapon(const char * specialfile, int swap_flags)
- {
- struct swap_info_struct * p;
-- struct nameidata nd;
-- struct inode * swap_inode;
- unsigned int type;
- int i, j, prev;
- int error;
-@@ -866,8 +979,9 @@
- int nr_good_pages = 0;
- unsigned long maxpages = 1;
- int swapfilesize;
-- struct block_device *bdev = NULL;
- unsigned short *swap_map;
-+ char * tmp_specialfile;
-+ struct file *swap_file;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-@@ -886,8 +1000,7 @@
- nr_swapfiles = type+1;
- p->flags = SWP_USED;
- p->swap_file = NULL;
-- p->swap_vfsmnt = NULL;
-- p->swap_device = 0;
-+ p->method = NULL;
- p->swap_map = NULL;
- p->lowest_bit = 0;
- p->highest_bit = 0;
-@@ -901,53 +1014,56 @@
- p->prio = --least_priority;
- }
- swap_list_unlock();
-- error = user_path_walk(specialfile, &nd);
-- if (error)
-+
-+ /* Open the swap using filp_open. Bail out on any errors. */
-+ tmp_specialfile = getname(specialfile);
-+ if (IS_ERR(tmp_specialfile)) {
-+ error = PTR_ERR(tmp_specialfile);
- goto bad_swap_2;
-+ }
-+ p->swap_file = filp_open(tmp_specialfile, O_RDWR, 0600);
-+ putname(tmp_specialfile);
-+ if (IS_ERR(p->swap_file)) {
-+ error = PTR_ERR(p->swap_file);
-+ goto bad_swap_1;
-+ }
-
-- p->swap_file = nd.dentry;
-- p->swap_vfsmnt = nd.mnt;
-- swap_inode = nd.dentry->d_inode;
- error = -EINVAL;
-
-- if (S_ISBLK(swap_inode->i_mode)) {
-- kdev_t dev = swap_inode->i_rdev;
-- struct block_device_operations *bdops;
-- devfs_handle_t de;
--
-- p->swap_device = dev;
-- set_blocksize(dev, PAGE_SIZE);
--
-- bd_acquire(swap_inode);
-- bdev = swap_inode->i_bdev;
-- de = devfs_get_handle_from_inode(swap_inode);
-- bdops = devfs_get_ops(de); /* Increments module use count */
-- if (bdops) bdev->bd_op = bdops;
--
-- error = blkdev_get(bdev, FMODE_READ|FMODE_WRITE, 0, BDEV_SWAP);
-- devfs_put_ops(de);/*Decrement module use count now we're safe*/
-- if (error)
-- goto bad_swap_2;
-- set_blocksize(dev, PAGE_SIZE);
-- error = -ENODEV;
-- if (!dev || (blk_size[MAJOR(dev)] &&
-- !blk_size[MAJOR(dev)][MINOR(dev)]))
-- goto bad_swap;
-- swapfilesize = 0;
-- if (blk_size[MAJOR(dev)])
-- swapfilesize = blk_size[MAJOR(dev)][MINOR(dev)]
-- >> (PAGE_SHIFT - 10);
-- } else if (S_ISREG(swap_inode->i_mode))
-- swapfilesize = swap_inode->i_size >> PAGE_SHIFT;
-- else
-- goto bad_swap;
-+ swapfilesize = find_swap_method(p->swap_file, p);
-+ if (swapfilesize < 0) {
-+ error = swapfilesize;
-+ goto bad_swap_1;
-+ }
-+#ifdef CONFIG_KMOD
-+ if (swapfilesize == 0) {
-+ (void)request_module("swapfile-mod");
-+
-+ swapfilesize = find_swap_method(p->swap_file, p);
-+ if (swapfilesize < 0) {
-+ error = swapfilesize;
-+ goto bad_swap_1;
-+ }
-+ }
-+#endif
-+ if (swapfilesize == 0) {
-+ printk("Don't know how to swap to this kind of file\n");
-+ goto bad_swap_1; /* free swap map */
-+ }
-+
-+ /* After this point, the swap-file has been opened by the swap
-+ * method. We must make sure to use the bad_swap label for any
-+ * errors.
-+ */
-
- error = -EBUSY;
- for (i = 0 ; i < nr_swapfiles ; i++) {
- struct swap_info_struct *q = &swap_info[i];
- if (i == type || !q->swap_file)
- continue;
-- if (swap_inode->i_mapping == q->swap_file->d_inode->i_mapping)
-+ if (p->swap_file->f_dentry->d_inode->i_mapping
-+ ==
-+ q->swap_file->f_dentry->d_inode->i_mapping)
- goto bad_swap;
- }
-
-@@ -1083,17 +1199,27 @@
- swap_list_unlock();
- error = 0;
- goto out;
-+
- bad_swap:
-- if (bdev)
-- blkdev_put(bdev, BDEV_SWAP);
-+ if (p->method->ops->release)
-+ p->method->ops->release(p->swap_file, p->data);
-+ swap_list_lock();
-+ p->method->use_count --;
-+ p->method = NULL;
-+ p->data = NULL;
-+ swap_list_unlock();
-+
-+bad_swap_1:
-+ swap_list_lock();
-+ swap_file = p->swap_file;
-+ p->swap_file = NULL;
-+ swap_list_unlock();
-+ filp_close(swap_file, NULL);
-+
- bad_swap_2:
-+
- swap_list_lock();
- swap_map = p->swap_map;
-- nd.mnt = p->swap_vfsmnt;
-- nd.dentry = p->swap_file;
-- p->swap_device = 0;
-- p->swap_file = NULL;
-- p->swap_vfsmnt = NULL;
- p->swap_map = NULL;
- p->flags = 0;
- if (!(swap_flags & SWAP_FLAG_PREFER))
-@@ -1101,7 +1227,7 @@
- swap_list_unlock();
- if (swap_map)
- vfree(swap_map);
-- path_release(&nd);
-+
- out:
- if (swap_header)
- free_page((long) swap_header);
-@@ -1217,8 +1343,8 @@
- /*
- * Prior swap_duplicate protects against swap device deletion.
- */
--void get_swaphandle_info(swp_entry_t entry, unsigned long *offset,
-- kdev_t *dev, struct inode **swapf)
-+struct swap_method *get_swaphandle_info(swp_entry_t entry,
-+ unsigned long *offset, void **data)
- {
- unsigned long type;
- struct swap_info_struct *p;
-@@ -1226,32 +1352,26 @@
- type = SWP_TYPE(entry);
- if (type >= nr_swapfiles) {
- printk(KERN_ERR "rw_swap_page: %s%08lx\n", Bad_file, entry.val);
-- return;
-+ return NULL;
- }
-
- p = &swap_info[type];
- *offset = SWP_OFFSET(entry);
- if (*offset >= p->max && *offset != 0) {
- printk(KERN_ERR "rw_swap_page: %s%08lx\n", Bad_offset, entry.val);
-- return;
-+ return NULL;
- }
- if (p->swap_map && !p->swap_map[*offset]) {
- printk(KERN_ERR "rw_swap_page: %s%08lx\n", Unused_offset, entry.val);
-- return;
-+ return NULL;
- }
- if (!(p->flags & SWP_USED)) {
- printk(KERN_ERR "rw_swap_page: %s%08lx\n", Unused_file, entry.val);
-- return;
-+ return NULL;
- }
-
-- if (p->swap_device) {
-- *dev = p->swap_device;
-- } else if (p->swap_file) {
-- *swapf = p->swap_file->d_inode;
-- } else {
-- printk(KERN_ERR "rw_swap_page: no swap file or device\n");
-- }
-- return;
-+ *data = p->data;
-+ return p->method;
- }
-
- /*
-diff -Nurb linux.orig/net/Config.in linux/net/Config.in
---- linux.orig/net/Config.in 2003-07-04 04:12:29.000000000 -0400
-+++ linux/net/Config.in 2004-05-31 02:18:03.000000000 -0400
-@@ -16,6 +16,9 @@
- fi
- bool 'Socket Filtering' CONFIG_FILTER
- tristate 'Unix domain sockets' CONFIG_UNIX
-+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-+ bool 'Swapping via network sockets (EXPERIMENTAL)' CONFIG_NETSWAP
-+fi
- bool 'TCP/IP networking' CONFIG_INET
- if [ "$CONFIG_INET" = "y" ]; then
- source net/ipv4/Config.in
-diff -Nurb linux.orig/net/Makefile linux/net/Makefile
---- linux.orig/net/Makefile 2003-07-04 04:12:29.000000000 -0400
-+++ linux/net/Makefile 2004-05-31 02:18:03.000000000 -0400
-@@ -51,6 +51,7 @@
- ifeq ($(CONFIG_NET),y)
- obj-$(CONFIG_MODULES) += netsyms.o
- obj-$(CONFIG_SYSCTL) += sysctl_net.o
-+obj-$(CONFIG_NETSWAP) += netswapping.o
- endif
-
- include $(TOPDIR)/Rules.make
-diff -Nurb linux.orig/net/core/sock.c linux/net/core/sock.c
---- linux.orig/net/core/sock.c 2003-10-14 04:09:32.000000000 -0400
-+++ linux/net/core/sock.c 2004-05-31 02:18:03.000000000 -0400
-@@ -402,6 +402,21 @@
- ret = -ENONET;
- break;
- #endif
-+#ifdef CONFIG_NETSWAP
-+ case SO_SWAPPING:
-+ if (valbool) {
-+ if (!sk->swapping) {
-+ netswap_sock_count ++;
-+ }
-+ sk->swapping ++;
-+ } else if (sk->swapping > 0) {
-+ sk->swapping --;
-+ if (!sk->swapping) {
-+ netswap_sock_count --;
-+ }
-+ }
-+ break;
-+#endif
- /* We implement the SO_SNDLOWAT etc to
- not be settable (1003.1g 5.3) */
- default:
-@@ -552,6 +567,12 @@
- goto lenout;
- }
-
-+#ifdef CONFIG_NETSWAP
-+ case SO_SWAPPING:
-+ v.val = sk->swapping;
-+ break;
-+#endif
-+
- /* Dubious BSD thing... Probably nobody even uses it, but
- * the UNIX standard wants it for whatever reason... -DaveM
- */
-diff -Nurb linux.orig/net/ipv4/tcp_ipv4.c linux/net/ipv4/tcp_ipv4.c
---- linux.orig/net/ipv4/tcp_ipv4.c 2003-10-14 04:09:33.000000000 -0400
-+++ linux/net/ipv4/tcp_ipv4.c 2004-05-31 02:18:03.000000000 -0400
-@@ -1657,6 +1657,12 @@
- if (filter && sk_filter(skb, filter))
- goto discard;
- #endif /* CONFIG_FILTER */
-+#ifdef CONFIG_NETSWAP
-+ /* tcp doesn't use sock_queue_rcv_skb() ... */
-+ /* an inline function defined in net/netswapping.h */
-+ if (netswap_low_memory(sk, skb))
-+ goto discard;
-+#endif /* CONFIG_NETSWAP */
-
- IP_INC_STATS_BH(IpInDelivers);
-
-diff -Nurb linux.orig/net/ipv6/tcp_ipv6.c linux/net/ipv6/tcp_ipv6.c
---- linux.orig/net/ipv6/tcp_ipv6.c 2003-10-14 04:09:34.000000000 -0400
-+++ linux/net/ipv6/tcp_ipv6.c 2004-05-31 02:18:03.000000000 -0400
-@@ -1424,6 +1424,12 @@
- if (filter && sk_filter(skb, filter))
- goto discard;
- #endif /* CONFIG_FILTER */
-+#ifdef CONFIG_NETSWAP
-+ /* tcp doesn't use sock_queue_rcv_skb() ... */
-+ /* an inline function defined in net/netswapping.h */
-+ if (netswap_low_memory(sk, skb))
-+ goto discard;
-+#endif /* CONFIG_NETSWAP */
-
- /*
- * socket locking is here for SMP purposes as backlog rcv
-diff -Nurb linux.orig/net/netswapping.c linux/net/netswapping.c
---- linux.orig/net/netswapping.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux/net/netswapping.c 2004-05-31 02:18:03.000000000 -0400
-@@ -0,0 +1,76 @@
-+/*
-+ * linux/net/swapping.c
-+ *
-+ * Support paging over network connections (inet only)
-+ *
-+ * (c) 2000 Claus-Justus Heine <heine@instmath.rwth-aachen.de>
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/swap.h>
-+#include <linux/swapctl.h>
-+#include <linux/skbuff.h>
-+#include <linux/module.h>
-+#include <linux/sysctl.h>
-+#include <linux/init.h>
-+#include <net/netswapping.h>
-+#include <net/sock.h>
-+#include <asm/uaccess.h>
-+
-+unsigned int netswap_dropped; /* statistics */
-+unsigned int netswap_free_pages_min;
-+int netswap_sock_count; /* how many sockets have swapping option set */
-+
-+#ifdef CONFIG_SYSCTL
-+
-+static ctl_table netswap_table[] = {
-+ {NET_SWAP_DROPPED, "dropped",
-+ &netswap_dropped, sizeof(int), 0644, NULL, &proc_dointvec },
-+ {NET_SWAP_DROP_THRESHOLD, "threshold",
-+ &netswap_free_pages_min, sizeof(int), 0644, NULL, &proc_dointvec },
-+ {NET_SWAP_SOCK_COUNT, "sock_count",
-+ &netswap_sock_count, sizeof(int), 0444, NULL, &proc_dointvec },
-+ {0},
-+};
-+
-+static struct ctl_table_header *netswap_sysctl_header;
-+
-+static ctl_table netswap_net_table[] = {
-+ {CTL_NETSWAP, "swapping", NULL, 0, 0555, netswap_table},
-+ {0}
-+};
-+
-+static ctl_table netswap_root_table[] = {
-+ {CTL_NET, "net", NULL, 0, 0555, netswap_net_table},
-+ {0}
-+};
-+
-+#endif
-+
-+int __init netswap_init(void)
-+{
-+ /* drop packets when below this threshold */
-+ netswap_free_pages_min = 32 /* freepages.min */;
-+#ifdef CONFIG_SYSCTL
-+ netswap_sysctl_header = register_sysctl_table(netswap_root_table, 0);
-+#endif
-+ return 0;
-+}
-+
-+void __exit netswap_exit(void)
-+{
-+#ifdef CONFIG_SYSCTL
-+ unregister_sysctl_table(netswap_sysctl_header);
-+#endif
-+}
-+
-+/* linux/init.h -- VERY nice :-)
-+ *
-+ * On the other hand, we have no control over the order the initcalls
-+ * are performed ...
-+ *
-+ * Actually, we are not compiled as module ...
-+ */
-+
-+module_init(netswap_init)
-+module_exit(netswap_exit)
-diff -Nurb linux.orig/net/netsyms.c linux/net/netsyms.c
---- linux.orig/net/netsyms.c 2004-05-31 02:02:49.000000000 -0400
-+++ linux/net/netsyms.c 2004-05-31 02:18:03.000000000 -0400
-@@ -601,4 +601,10 @@
- EXPORT_SYMBOL(wireless_send_event);
- #endif /* CONFIG_NET_RADIO || CONFIG_NET_PCMCIA_RADIO */
-
-+#ifdef CONFIG_NETSWAP
-+EXPORT_SYMBOL(netswap_sock_count);
-+EXPORT_SYMBOL(netswap_free_pages_min);
-+EXPORT_SYMBOL(netswap_dropped);
-+#endif
-+
- #endif /* CONFIG_NET */
-diff -Nurb linux.orig/net/packet/af_packet.c linux/net/packet/af_packet.c
---- linux.orig/net/packet/af_packet.c 2003-10-14 04:09:35.000000000 -0400
-+++ linux/net/packet/af_packet.c 2004-05-31 02:18:03.000000000 -0400
-@@ -449,6 +449,12 @@
- snaplen = res;
- }
- #endif /* CONFIG_FILTER */
-+#ifdef CONFIG_NETSWAP
-+ /* packet doesn't use sock_queue_rcv_skb() ... */
-+ /* an inline function defined in net/netswapping.h */
-+ if (netswap_low_memory(sk, skb))
-+ goto drop_n_restore;
-+#endif /* CONFIG_NETSWAP */
-
- if (atomic_read(&sk->rmem_alloc) + skb->truesize >= (unsigned)sk->rcvbuf)
- goto drop_n_acct;
-@@ -496,7 +502,7 @@
- po->stats.tp_drops++;
- spin_unlock(&sk->receive_queue.lock);
-
--#ifdef CONFIG_FILTER
-+#if defined(CONFIG_FILTER) || defined(CONFIG_NETSWAP)
- drop_n_restore:
- #endif
- if (skb_head != skb->data && skb_shared(skb)) {
-@@ -557,6 +563,12 @@
- snaplen = res;
- }
- #endif
-+#ifdef CONFIG_NETSWAP
-+ /* packet doesn't use sock_queue_rcv_skb() ... */
-+ /* an inline function defined in net/netswapping.h */
-+ if (netswap_low_memory(sk, skb))
-+ goto drop_n_restore;
-+#endif /* CONFIG_NETSWAP */
-
- if (sk->type == SOCK_DGRAM) {
- macoff = netoff = TPACKET_ALIGN(TPACKET_HDRLEN) + 16;
-diff -Nurb linux.orig/net/sunrpc/sched.c linux/net/sunrpc/sched.c
---- linux.orig/net/sunrpc/sched.c 2003-07-04 04:12:33.000000000 -0400
-+++ linux/net/sunrpc/sched.c 2004-05-31 02:18:03.000000000 -0400
-@@ -79,10 +79,11 @@
- */
- static spinlock_t rpc_sched_lock = SPIN_LOCK_UNLOCKED;
-
-+#if CONFIG_SWAP_VIA_NFS || CONFIG_SWAP_VIA_NFS_MODULE
- /*
- * This is the last-ditch buffer for NFS swap requests
- */
--static u32 swap_buffer[PAGE_SIZE >> 2];
-+static u32 swap_buffer[2*PAGE_SIZE >> 2];
- static long swap_buffer_used;
-
- /*
-@@ -96,6 +97,7 @@
- {
- clear_bit(1, &swap_buffer_used);
- }
-+#endif
-
- /*
- * Disable the timer for a given RPC task. Should be called with
-@@ -501,6 +503,7 @@
- __rpc_execute(struct rpc_task *task)
- {
- int status = 0;
-+ unsigned long alloc_flag = current->flags & PF_MEMALLOC;
-
- dprintk("RPC: %4d rpc_execute flgs %x\n",
- task->tk_pid, task->tk_flags);
-@@ -510,6 +513,13 @@
- return 0;
- }
-
-+ if (task->tk_flags & RPC_TASK_SWAPPER) {
-+ if (!current->flags & PF_MEMALLOC) {
-+ dprintk("__rpc_execute: Setting PF_MEMALLOC\n");
-+ }
-+ current->flags |= PF_MEMALLOC;
-+ }
-+
- restarted:
- while (1) {
- /*
-@@ -554,7 +564,8 @@
- rpc_set_sleeping(task);
- if (RPC_IS_ASYNC(task)) {
- spin_unlock_bh(&rpc_queue_lock);
-- return 0;
-+ status = 0;
-+ goto out;
- }
- }
- spin_unlock_bh(&rpc_queue_lock);
-@@ -563,7 +574,12 @@
- /* sync task: sleep here */
- dprintk("RPC: %4d sync task going to sleep\n",
- task->tk_pid);
-- if (current->pid == rpciod_pid)
-+ /* it's ok to wait for rpciod when swapping,
-+ * because this means it needed memory and is
-+ * doing the swap-out itself.
-+ */
-+ if (current->pid == rpciod_pid &&
-+ !(task->tk_flags & RPC_TASK_SWAPPER))
- printk(KERN_ERR "RPC: rpciod waiting on sync task!\n");
-
- __wait_event(task->tk_wait, !RPC_IS_SLEEPING(task));
-@@ -608,6 +624,10 @@
- /* Release all resources associated with the task */
- rpc_release_task(task);
-
-+ out:
-+ if (!alloc_flag) {
-+ current->flags &= ~PF_MEMALLOC;
-+ }
- return status;
- }
-
-@@ -699,10 +719,16 @@
- {
- u32 *buffer;
- int gfp;
-+ unsigned long alloc_flag = current->flags & PF_MEMALLOC;
-+ void *ret = NULL;
-
-- if (flags & RPC_TASK_SWAPPER)
-+ if (flags & RPC_TASK_SWAPPER) {
- gfp = GFP_ATOMIC;
-- else if (flags & RPC_TASK_ASYNC)
-+ if (!(current->flags & PF_MEMALLOC)) {
-+ dprintk("rpc_allocate: Setting PF_MEMALLOC\n");
-+ }
-+ current->flags |= PF_MEMALLOC;
-+ } else if (flags & RPC_TASK_ASYNC)
- gfp = GFP_RPC;
- else
- gfp = GFP_KERNEL;
-@@ -710,29 +736,44 @@
- do {
- if ((buffer = (u32 *) kmalloc(size, gfp)) != NULL) {
- dprintk("RPC: allocated buffer %p\n", buffer);
-- return buffer;
-+ ret = buffer;
-+ goto out;
- }
-+#if CONFIG_SWAP_VIA_NFS || CONFIG_SWAP_VIA_NFS_MODULE
- if ((flags & RPC_TASK_SWAPPER) && size <= sizeof(swap_buffer)
- && rpc_lock_swapbuf()) {
- dprintk("RPC: used last-ditch swap buffer\n");
-- return swap_buffer;
-+ ret = swap_buffer;
-+ goto out;
-+#endif
-+ }
-+ if (flags & RPC_TASK_ASYNC) {
-+ ret = NULL;
-+ goto out;
- }
-- if (flags & RPC_TASK_ASYNC)
-- return NULL;
- yield();
- } while (!signalled());
-
-- return NULL;
-+ out:
-+ if (!alloc_flag) {
-+ current->flags &= ~PF_MEMALLOC;
-+ }
-+ return ret;
- }
-
- void
- rpc_free(void *buffer)
- {
-+#if CONFIG_SWAP_VIA_NFS || CONFIG_SWAP_VIA_NFS_MODULE
- if (buffer != swap_buffer) {
-+#endif
- kfree(buffer);
- return;
-+#if CONFIG_SWAP_VIA_NFS || CONFIG_SWAP_VIA_NFS_MODULE
- }
- rpc_unlock_swapbuf();
-+ printk("RPC: Released swap buffer\n");
-+#endif
- }
-
- /*
-diff -Nurb linux.orig/net/sunrpc/xprt.c linux/net/sunrpc/xprt.c
---- linux.orig/net/sunrpc/xprt.c 2003-07-04 04:12:33.000000000 -0400
-+++ linux/net/sunrpc/xprt.c 2004-05-31 02:18:03.000000000 -0400
-@@ -139,7 +139,7 @@
- __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task)
- {
- if (!xprt->snd_task) {
-- if (xprt->nocong || __xprt_get_cong(xprt, task))
-+ if (__xprt_get_cong(xprt, task))
- xprt->snd_task = task;
- }
- if (xprt->snd_task != task) {
-@@ -179,7 +179,7 @@
- if (!task)
- return;
- }
-- if (xprt->nocong || __xprt_get_cong(xprt, task))
-+ if (__xprt_get_cong(xprt, task))
- xprt->snd_task = task;
- }
-
-@@ -276,6 +276,9 @@
- {
- struct rpc_rqst *req = task->tk_rqstp;
-
-+ if (xprt->nocong || RPC_IS_SWAPPER(task))
-+ return 1;
-+
- if (req->rq_cong)
- return 1;
- dprintk("RPC: %4d xprt_cwnd_limited cong = %ld cwnd = %ld\n",
+++ /dev/null
---- linux-2.4.21/net/bridge/br_private.h Mon Feb 25 20:38:14 2002
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/br_private.h Fri Aug 8 01:09:06 2003
-@@ -144,8 +144,10 @@ extern void br_fdb_insert(struct net_bri
- /* br_forward.c */
- extern void br_deliver(struct net_bridge_port *to,
- struct sk_buff *skb);
-+extern int br_dev_queue_push_xmit(struct sk_buff *skb);
- extern void br_forward(struct net_bridge_port *to,
- struct sk_buff *skb);
-+extern int br_forward_finish(struct sk_buff *skb);
- extern void br_flood_deliver(struct net_bridge *br,
- struct sk_buff *skb,
- int clone);
-@@ -166,7 +168,8 @@ extern void br_get_port_ifindices(struct
- int *ifindices);
-
- /* br_input.c */
--extern void br_handle_frame(struct sk_buff *skb);
-+extern int br_handle_frame_finish(struct sk_buff *skb);
-+extern int br_handle_frame(struct sk_buff *skb);
-
- /* br_ioctl.c */
- extern void br_call_ioctl_atomic(void (*fn)(void));
-@@ -176,6 +179,10 @@ extern int br_ioctl(struct net_bridge *b
- unsigned long arg1,
- unsigned long arg2);
- extern int br_ioctl_deviceless_stub(unsigned long arg);
-+
-+/* br_netfilter.c */
-+extern int br_netfilter_init(void);
-+extern void br_netfilter_fini(void);
-
- /* br_stp.c */
- extern int br_is_root_bridge(struct net_bridge *br);
---- linux-2.4.21/include/linux/if_bridge.h Thu Nov 22 20:47:12 2001
-+++ linux-2.4.21-ebt-brnf-3/include/linux/if_bridge.h Fri Aug 8 01:09:06 2003
-@@ -102,7 +102,8 @@ struct net_bridge;
- struct net_bridge_port;
-
- extern int (*br_ioctl_hook)(unsigned long arg);
--extern void (*br_handle_frame_hook)(struct sk_buff *skb);
-+extern int (*br_handle_frame_hook)(struct sk_buff *skb);
-+extern int (*br_should_route_hook)(struct sk_buff **pskb);
-
- #endif
-
---- linux-2.4.21/net/core/dev.c Fri Jun 13 16:51:39 2003
-+++ linux-2.4.21-ebt-brnf-3/net/core/dev.c Fri Aug 8 01:10:03 2003
-@@ -1424,7 +1424,7 @@ static void net_tx_action(struct softirq
-
-
- #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
--void (*br_handle_frame_hook)(struct sk_buff *skb) = NULL;
-+int (*br_handle_frame_hook)(struct sk_buff *skb) = NULL;
- #endif
-
- static __inline__ int handle_bridge(struct sk_buff *skb,
-@@ -1441,7 +1441,6 @@ static __inline__ int handle_bridge(stru
- }
- }
-
-- br_handle_frame_hook(skb);
- return ret;
- }
-
-@@ -1497,11 +1496,16 @@ int netif_receive_skb(struct sk_buff *sk
- if (skb->dev->divert && skb->dev->divert->divert)
- ret = handle_diverter(skb);
- #endif /* CONFIG_NET_DIVERT */
--
-+
- #if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
- if (skb->dev->br_port != NULL &&
-- br_handle_frame_hook != NULL) {
-- return handle_bridge(skb, pt_prev);
-+ br_handle_frame_hook != NULL) {
-+ int ret;
-+
-+ ret = handle_bridge(skb, pt_prev);
-+ if (br_handle_frame_hook(skb) == 0)
-+ return ret;
-+ pt_prev = NULL;
- }
- #endif
-
-@@ -1897,7 +1901,7 @@ static int dev_proc_stats(char *buffer,
- * are adjusted, %RTM_NEWLINK is sent to the routing socket and the
- * function returns zero.
- */
--
-+
- int netdev_set_master(struct net_device *slave, struct net_device *master)
- {
- struct net_device *old = slave->master;
---- linux-2.4.21/net/bridge/br_input.c Sat Aug 3 02:39:46 2002
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/br_input.c Fri Aug 8 01:09:06 2003
-@@ -24,6 +24,9 @@ unsigned char bridge_ula[6] = { 0x01, 0x
-
- static int br_pass_frame_up_finish(struct sk_buff *skb)
- {
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug = 0;
-+#endif
- netif_rx(skb);
-
- return 0;
-@@ -46,7 +49,7 @@ static void br_pass_frame_up(struct net_
- br_pass_frame_up_finish);
- }
-
--static int br_handle_frame_finish(struct sk_buff *skb)
-+int br_handle_frame_finish(struct sk_buff *skb)
- {
- struct net_bridge *br;
- unsigned char *dest;
-@@ -112,7 +115,7 @@ err_nolock:
- return 0;
- }
-
--void br_handle_frame(struct sk_buff *skb)
-+int br_handle_frame(struct sk_buff *skb)
- {
- struct net_bridge *br;
- unsigned char *dest;
-@@ -146,25 +149,35 @@ void br_handle_frame(struct sk_buff *skb
- goto handle_special_frame;
-
- if (p->state == BR_STATE_FORWARDING) {
-+
-+ if (br_should_route_hook && br_should_route_hook(&skb)) {
-+ read_unlock(&br->lock);
-+ return -1;
-+ }
-+
-+ if (!memcmp(p->br->dev.dev_addr, dest, ETH_ALEN))
-+ skb->pkt_type = PACKET_HOST;
-+
- NF_HOOK(PF_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
- br_handle_frame_finish);
- read_unlock(&br->lock);
-- return;
-+ return 0;
- }
-
- err:
- read_unlock(&br->lock);
- err_nolock:
- kfree_skb(skb);
-- return;
-+ return 0;
-
- handle_special_frame:
- if (!dest[5]) {
- br_stp_handle_bpdu(skb);
- read_unlock(&br->lock);
-- return;
-+ return 0;
- }
-
- read_unlock(&br->lock);
- kfree_skb(skb);
-+ return 0;
- }
---- linux-2.4.21/net/bridge/br_forward.c Sat Aug 3 02:39:46 2002
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/br_forward.c Fri Aug 8 01:09:06 2003
-@@ -30,18 +30,22 @@ static inline int should_deliver(struct
- return 1;
- }
-
--static int __dev_queue_push_xmit(struct sk_buff *skb)
-+int br_dev_queue_push_xmit(struct sk_buff *skb)
- {
-+#ifdef CONFIG_NETFILTER
-+ if (skb->nf_bridge)
-+ memcpy(skb->data - 16, skb->nf_bridge->hh, 16);
-+#endif
- skb_push(skb, ETH_HLEN);
- dev_queue_xmit(skb);
-
- return 0;
- }
-
--static int __br_forward_finish(struct sk_buff *skb)
-+int br_forward_finish(struct sk_buff *skb)
- {
- NF_HOOK(PF_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev,
-- __dev_queue_push_xmit);
-+ br_dev_queue_push_xmit);
-
- return 0;
- }
-@@ -49,8 +53,11 @@ static int __br_forward_finish(struct sk
- static void __br_deliver(struct net_bridge_port *to, struct sk_buff *skb)
- {
- skb->dev = to->dev;
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug = 0;
-+#endif
- NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
-- __br_forward_finish);
-+ br_forward_finish);
- }
-
- static void __br_forward(struct net_bridge_port *to, struct sk_buff *skb)
-@@ -61,7 +68,7 @@ static void __br_forward(struct net_brid
- skb->dev = to->dev;
-
- NF_HOOK(PF_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev,
-- __br_forward_finish);
-+ br_forward_finish);
- }
-
- /* called under bridge lock */
---- linux-2.4.21/net/bridge/br.c Fri Nov 29 00:53:15 2002
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/br.c Fri Aug 8 01:09:06 2003
-@@ -29,6 +29,8 @@
- #include "../atm/lec.h"
- #endif
-
-+int (*br_should_route_hook) (struct sk_buff **pskb) = NULL;
-+
- void br_dec_use_count()
- {
- MOD_DEC_USE_COUNT;
-@@ -43,6 +45,10 @@ static int __init br_init(void)
- {
- printk(KERN_INFO "NET4: Ethernet Bridge 008 for NET4.0\n");
-
-+#ifdef CONFIG_NETFILTER
-+ if (br_netfilter_init())
-+ return 1;
-+#endif
- br_handle_frame_hook = br_handle_frame;
- br_ioctl_hook = br_ioctl_deviceless_stub;
- #if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
-@@ -61,6 +67,9 @@ static void __br_clear_ioctl_hook(void)
-
- static void __exit br_deinit(void)
- {
-+#ifdef CONFIG_NETFILTER
-+ br_netfilter_fini();
-+#endif
- unregister_netdevice_notifier(&br_device_notifier);
- br_call_ioctl_atomic(__br_clear_ioctl_hook);
-
-@@ -74,7 +83,7 @@ static void __exit br_deinit(void)
- #endif
- }
-
--EXPORT_NO_SYMBOLS;
-+EXPORT_SYMBOL(br_should_route_hook);
-
- module_init(br_init)
- module_exit(br_deinit)
---- linux-2.4.21/net/bridge/Makefile Fri Dec 29 23:07:24 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/Makefile Fri Aug 8 01:09:06 2003
-@@ -7,10 +7,17 @@
- #
- # Note 2! The CFLAGS definition is now in the main makefile...
-
-+export-objs := br.o
-+
- O_TARGET := bridge.o
- obj-y := br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o \
- br_ioctl.o br_notify.o br_stp.o br_stp_bpdu.o \
- br_stp_if.o br_stp_timer.o
-+
-+ifeq ($(CONFIG_NETFILTER),y)
-+obj-y += br_netfilter.o
-+endif
-+
- obj-m := $(O_TARGET)
-
- include $(TOPDIR)/Rules.make
---- linux-2.4.21/include/linux/netfilter_bridge.h Tue Jun 12 04:15:27 2001
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge.h Fri Aug 8 01:09:06 2003
-@@ -1,11 +1,14 @@
- #ifndef __LINUX_BRIDGE_NETFILTER_H
- #define __LINUX_BRIDGE_NETFILTER_H
-
--/* bridge-specific defines for netfilter.
-+/* bridge-specific defines for netfilter.
- */
-
- #include <linux/config.h>
- #include <linux/netfilter.h>
-+#if defined(__KERNEL__) && defined(CONFIG_NETFILTER)
-+#include <asm/atomic.h>
-+#endif
-
- /* Bridge Hooks */
- /* After promisc drops, checksum checks. */
-@@ -18,7 +21,49 @@
- #define NF_BR_LOCAL_OUT 3
- /* Packets about to hit the wire. */
- #define NF_BR_POST_ROUTING 4
--#define NF_BR_NUMHOOKS 5
-+/* Not really a hook, but used for the ebtables broute table */
-+#define NF_BR_BROUTING 5
-+#define NF_BR_NUMHOOKS 6
-
-+#ifdef __KERNEL__
-
-+#define BRNF_PKT_TYPE 0x01
-+#define BRNF_BRIDGED_DNAT 0x02
-+#define BRNF_DONT_TAKE_PARENT 0x04
-+#define BRNF_BRIDGED 0x08
-+
-+enum nf_br_hook_priorities {
-+ NF_BR_PRI_FIRST = INT_MIN,
-+ NF_BR_PRI_NAT_DST_BRIDGED = -300,
-+ NF_BR_PRI_FILTER_BRIDGED = -200,
-+ NF_BR_PRI_BRNF = 0,
-+ NF_BR_PRI_NAT_DST_OTHER = 100,
-+ NF_BR_PRI_FILTER_OTHER = 200,
-+ NF_BR_PRI_NAT_SRC = 300,
-+ NF_BR_PRI_LAST = INT_MAX,
-+};
-+
-+#ifdef CONFIG_NETFILTER
-+static inline
-+struct nf_bridge_info *nf_bridge_alloc(struct sk_buff *skb)
-+{
-+ struct nf_bridge_info **nf_bridge = &(skb->nf_bridge);
-+
-+ if ((*nf_bridge = kmalloc(sizeof(**nf_bridge), GFP_ATOMIC)) != NULL) {
-+ atomic_set(&(*nf_bridge)->use, 1);
-+ (*nf_bridge)->mask = 0;
-+ (*nf_bridge)->physindev = (*nf_bridge)->physoutdev = NULL;
-+ }
-+
-+ return *nf_bridge;
-+}
-+
-+struct bridge_skb_cb {
-+ union {
-+ __u32 ipv4;
-+ } daddr;
-+};
-+#endif /* CONFIG_NETFILTER */
-+
-+#endif /* __KERNEL__ */
- #endif
---- linux-2.4.21/net/Makefile Sat Aug 3 02:39:46 2002
-+++ linux-2.4.21-ebt-brnf-3/net/Makefile Fri Aug 8 01:09:06 2003
-@@ -7,7 +7,8 @@
-
- O_TARGET := network.o
-
--mod-subdirs := ipv4/netfilter ipv6/netfilter ipx irda bluetooth atm netlink sched core
-+mod-subdirs := ipv4/netfilter ipv6/netfilter bridge/netfilter ipx irda \
-+ bluetooth atm netlink sched core
- export-objs := netsyms.o
-
- subdir-y := core ethernet
-@@ -23,6 +24,12 @@ subdir-$(CONFIG_IPV6) += ipv6
- ifneq ($(CONFIG_IPV6),n)
- ifneq ($(CONFIG_IPV6),)
- subdir-$(CONFIG_NETFILTER) += ipv6/netfilter
-+endif
-+endif
-+
-+ifneq ($(CONFIG_BRIDGE),n)
-+ifneq ($(CONFIG_BRIDGE),)
-+subdir-$(CONFIG_BRIDGE) += bridge/netfilter
- endif
- endif
-
---- linux-2.4.21/net/Config.in Sat Aug 3 02:39:46 2002
-+++ linux-2.4.21-ebt-brnf-3/net/Config.in Fri Aug 8 01:09:06 2003
-@@ -65,6 +65,9 @@ if [ "$CONFIG_DECNET" != "n" ]; then
- source net/decnet/Config.in
- fi
- dep_tristate '802.1d Ethernet Bridging' CONFIG_BRIDGE $CONFIG_INET
-+if [ "$CONFIG_BRIDGE" != "n" -a "$CONFIG_NETFILTER" != "n" ]; then
-+ source net/bridge/netfilter/Config.in
-+fi
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- tristate 'CCITT X.25 Packet Layer (EXPERIMENTAL)' CONFIG_X25
- tristate 'LAPB Data Link Driver (EXPERIMENTAL)' CONFIG_LAPB
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/Makefile Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,30 @@
-+#
-+# Makefile for the netfilter modules on top of bridging.
-+#
-+# Note! Dependencies are done automagically by 'make dep', which also
-+# removes any old dependencies. DON'T put your own dependencies here
-+# unless it's something special (ie not a .c file).
-+#
-+# Note 2! The CFLAGS definition is now in the main makefile...
-+
-+O_TARGET := netfilter.o
-+
-+export-objs := ebtables.o
-+
-+obj-$(CONFIG_BRIDGE_NF_EBTABLES) += ebtables.o
-+obj-$(CONFIG_BRIDGE_EBT_T_FILTER) += ebtable_filter.o
-+obj-$(CONFIG_BRIDGE_EBT_T_NAT) += ebtable_nat.o
-+obj-$(CONFIG_BRIDGE_EBT_BROUTE) += ebtable_broute.o
-+obj-$(CONFIG_BRIDGE_EBT_IPF) += ebt_ip.o
-+obj-$(CONFIG_BRIDGE_EBT_ARPF) += ebt_arp.o
-+obj-$(CONFIG_BRIDGE_EBT_VLANF) += ebt_vlan.o
-+obj-$(CONFIG_BRIDGE_EBT_MARKF) += ebt_mark_m.o
-+obj-$(CONFIG_BRIDGE_EBT_802_3) += ebt_802_3.o
-+obj-$(CONFIG_BRIDGE_EBT_PKTTYPE) += ebt_pkttype.o
-+obj-$(CONFIG_BRIDGE_EBT_PKTTYPE) += ebt_stp.o
-+obj-$(CONFIG_BRIDGE_EBT_LOG) += ebt_log.o
-+obj-$(CONFIG_BRIDGE_EBT_SNAT) += ebt_snat.o
-+obj-$(CONFIG_BRIDGE_EBT_DNAT) += ebt_dnat.o
-+obj-$(CONFIG_BRIDGE_EBT_REDIRECT) += ebt_redirect.o
-+obj-$(CONFIG_BRIDGE_EBT_MARK_T) += ebt_mark.o
-+include $(TOPDIR)/Rules.make
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/Config.in Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,19 @@
-+#
-+# Bridge netfilter configuration
-+#
-+dep_tristate ' Bridge: ebtables' CONFIG_BRIDGE_NF_EBTABLES $CONFIG_BRIDGE
-+dep_tristate ' ebt: filter table support' CONFIG_BRIDGE_EBT_T_FILTER $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: nat table support' CONFIG_BRIDGE_EBT_T_NAT $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: broute table support' CONFIG_BRIDGE_EBT_BROUTE $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: log support' CONFIG_BRIDGE_EBT_LOG $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: IP filter support' CONFIG_BRIDGE_EBT_IPF $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: ARP filter support' CONFIG_BRIDGE_EBT_ARPF $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: 802.1Q VLAN filter support' CONFIG_BRIDGE_EBT_VLANF $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: 802.3 filter support' CONFIG_BRIDGE_EBT_802_3 $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: packet type filter support' CONFIG_BRIDGE_EBT_PKTTYPE $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: STP filter support' CONFIG_BRIDGE_EBT_STP $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: mark filter support' CONFIG_BRIDGE_EBT_MARKF $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: snat target support' CONFIG_BRIDGE_EBT_SNAT $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: dnat target support' CONFIG_BRIDGE_EBT_DNAT $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: redirect target support' CONFIG_BRIDGE_EBT_REDIRECT $CONFIG_BRIDGE_NF_EBTABLES
-+dep_tristate ' ebt: mark target support' CONFIG_BRIDGE_EBT_MARK_T $CONFIG_BRIDGE_NF_EBTABLES
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebtable_filter.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,90 @@
-+/*
-+ * ebtable_filter
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/module.h>
-+
-+#define FILTER_VALID_HOOKS ((1 << NF_BR_LOCAL_IN) | (1 << NF_BR_FORWARD) | \
-+ (1 << NF_BR_LOCAL_OUT))
-+
-+static struct ebt_entries initial_chains[] =
-+{
-+ {0, "INPUT", 0, EBT_ACCEPT, 0},
-+ {0, "FORWARD", 0, EBT_ACCEPT, 0},
-+ {0, "OUTPUT", 0, EBT_ACCEPT, 0}
-+};
-+
-+static struct ebt_replace initial_table =
-+{
-+ "filter", FILTER_VALID_HOOKS, 0, 3 * sizeof(struct ebt_entries),
-+ { [NF_BR_LOCAL_IN]&initial_chains[0], [NF_BR_FORWARD]&initial_chains[1],
-+ [NF_BR_LOCAL_OUT]&initial_chains[2] }, 0, NULL, (char *)initial_chains
-+};
-+
-+static int check(const struct ebt_table_info *info, unsigned int valid_hooks)
-+{
-+ if (valid_hooks & ~FILTER_VALID_HOOKS)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_table frame_filter =
-+{
-+ {NULL, NULL}, "filter", &initial_table, FILTER_VALID_HOOKS,
-+ RW_LOCK_UNLOCKED, check, NULL
-+};
-+
-+static unsigned int
-+ebt_hook (unsigned int hook, struct sk_buff **pskb, const struct net_device *in,
-+ const struct net_device *out, int (*okfn)(struct sk_buff *))
-+{
-+ return ebt_do_table(hook, pskb, in, out, &frame_filter);
-+}
-+
-+static struct nf_hook_ops ebt_ops_filter[] = {
-+ { { NULL, NULL }, ebt_hook, PF_BRIDGE, NF_BR_LOCAL_IN,
-+ NF_BR_PRI_FILTER_BRIDGED},
-+ { { NULL, NULL }, ebt_hook, PF_BRIDGE, NF_BR_FORWARD,
-+ NF_BR_PRI_FILTER_BRIDGED},
-+ { { NULL, NULL }, ebt_hook, PF_BRIDGE, NF_BR_LOCAL_OUT,
-+ NF_BR_PRI_FILTER_OTHER}
-+};
-+
-+static int __init init(void)
-+{
-+ int i, j, ret;
-+
-+ ret = ebt_register_table(&frame_filter);
-+ if (ret < 0)
-+ return ret;
-+ for (i = 0; i < sizeof(ebt_ops_filter) / sizeof(ebt_ops_filter[0]); i++)
-+ if ((ret = nf_register_hook(&ebt_ops_filter[i])) < 0)
-+ goto cleanup;
-+ return ret;
-+cleanup:
-+ for (j = 0; j < i; j++)
-+ nf_unregister_hook(&ebt_ops_filter[j]);
-+ ebt_unregister_table(&frame_filter);
-+ return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < sizeof(ebt_ops_filter) / sizeof(ebt_ops_filter[0]); i++)
-+ nf_unregister_hook(&ebt_ops_filter[i]);
-+ ebt_unregister_table(&frame_filter);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebtable_nat.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,96 @@
-+/*
-+ * ebtable_nat
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/module.h>
-+#define NAT_VALID_HOOKS ((1 << NF_BR_PRE_ROUTING) | (1 << NF_BR_LOCAL_OUT) | \
-+ (1 << NF_BR_POST_ROUTING))
-+
-+static struct ebt_entries initial_chains[] =
-+{
-+ {0, "PREROUTING", 0, EBT_ACCEPT, 0},
-+ {0, "OUTPUT", 0, EBT_ACCEPT, 0},
-+ {0, "POSTROUTING", 0, EBT_ACCEPT, 0}
-+};
-+
-+static struct ebt_replace initial_table =
-+{
-+ "nat", NAT_VALID_HOOKS, 0, 3 * sizeof(struct ebt_entries),
-+ { [NF_BR_PRE_ROUTING]&initial_chains[0], [NF_BR_LOCAL_OUT]&initial_chains[1],
-+ [NF_BR_POST_ROUTING]&initial_chains[2] }, 0, NULL, (char *)initial_chains
-+};
-+
-+static int check(const struct ebt_table_info *info, unsigned int valid_hooks)
-+{
-+ if (valid_hooks & ~NAT_VALID_HOOKS)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_table frame_nat =
-+{
-+ {NULL, NULL}, "nat", &initial_table, NAT_VALID_HOOKS,
-+ RW_LOCK_UNLOCKED, check, NULL
-+};
-+
-+static unsigned int
-+ebt_nat_dst(unsigned int hook, struct sk_buff **pskb, const struct net_device *in
-+ , const struct net_device *out, int (*okfn)(struct sk_buff *))
-+{
-+ return ebt_do_table(hook, pskb, in, out, &frame_nat);
-+}
-+
-+static unsigned int
-+ebt_nat_src(unsigned int hook, struct sk_buff **pskb, const struct net_device *in
-+ , const struct net_device *out, int (*okfn)(struct sk_buff *))
-+{
-+ return ebt_do_table(hook, pskb, in, out, &frame_nat);
-+}
-+
-+static struct nf_hook_ops ebt_ops_nat[] = {
-+ { { NULL, NULL }, ebt_nat_dst, PF_BRIDGE, NF_BR_LOCAL_OUT,
-+ NF_BR_PRI_NAT_DST_OTHER},
-+ { { NULL, NULL }, ebt_nat_src, PF_BRIDGE, NF_BR_POST_ROUTING,
-+ NF_BR_PRI_NAT_SRC},
-+ { { NULL, NULL }, ebt_nat_dst, PF_BRIDGE, NF_BR_PRE_ROUTING,
-+ NF_BR_PRI_NAT_DST_BRIDGED},
-+};
-+
-+static int __init init(void)
-+{
-+ int i, ret, j;
-+
-+ ret = ebt_register_table(&frame_nat);
-+ if (ret < 0)
-+ return ret;
-+ for (i = 0; i < sizeof(ebt_ops_nat) / sizeof(ebt_ops_nat[0]); i++)
-+ if ((ret = nf_register_hook(&ebt_ops_nat[i])) < 0)
-+ goto cleanup;
-+ return ret;
-+cleanup:
-+ for (j = 0; j < i; j++)
-+ nf_unregister_hook(&ebt_ops_nat[j]);
-+ ebt_unregister_table(&frame_nat);
-+ return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < sizeof(ebt_ops_nat) / sizeof(ebt_ops_nat[0]); i++)
-+ nf_unregister_hook(&ebt_ops_nat[i]);
-+ ebt_unregister_table(&frame_nat);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebtable_broute.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,79 @@
-+/*
-+ * ebtable_broute
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ * This table lets you choose between routing and bridging for frames
-+ * entering on a bridge enslaved nic. This table is traversed before any
-+ * other ebtables table. See net/bridge/br_input.c.
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/module.h>
-+#include <linux/if_bridge.h>
-+#include <linux/brlock.h>
-+
-+// EBT_ACCEPT means the frame will be bridged
-+// EBT_DROP means the frame will be routed
-+static struct ebt_entries initial_chain =
-+ {0, "BROUTING", 0, EBT_ACCEPT, 0};
-+
-+static struct ebt_replace initial_table =
-+{
-+ "broute", 1 << NF_BR_BROUTING, 0, sizeof(struct ebt_entries),
-+ { [NF_BR_BROUTING]&initial_chain}, 0, NULL, (char *)&initial_chain
-+};
-+
-+static int check(const struct ebt_table_info *info, unsigned int valid_hooks)
-+{
-+ if (valid_hooks & ~(1 << NF_BR_BROUTING))
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_table broute_table =
-+{
-+ {NULL, NULL}, "broute", &initial_table, 1 << NF_BR_BROUTING,
-+ RW_LOCK_UNLOCKED, check, NULL
-+};
-+
-+static int ebt_broute(struct sk_buff **pskb)
-+{
-+ int ret;
-+
-+ ret = ebt_do_table(NF_BR_BROUTING, pskb, (*pskb)->dev, NULL,
-+ &broute_table);
-+ if (ret == NF_DROP)
-+ return 1; // route it
-+ return 0; // bridge it
-+}
-+
-+static int __init init(void)
-+{
-+ int ret;
-+
-+ ret = ebt_register_table(&broute_table);
-+ if (ret < 0)
-+ return ret;
-+ br_write_lock_bh(BR_NETPROTO_LOCK);
-+ // see br_input.c
-+ br_should_route_hook = ebt_broute;
-+ br_write_unlock_bh(BR_NETPROTO_LOCK);
-+ return ret;
-+}
-+
-+static void __exit fini(void)
-+{
-+ br_write_lock_bh(BR_NETPROTO_LOCK);
-+ br_should_route_hook = NULL;
-+ br_write_unlock_bh(BR_NETPROTO_LOCK);
-+ ebt_unregister_table(&broute_table);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_802_3.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,74 @@
-+/*
-+ * 802_3
-+ *
-+ * Author:
-+ * Chris Vitale csv@bluetail.com
-+ *
-+ * May 2003
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_802_3.h>
-+#include <linux/module.h>
-+
-+static int ebt_filter_802_3(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *data, unsigned int datalen)
-+{
-+ struct ebt_802_3_info *info = (struct ebt_802_3_info *)data;
-+ struct ebt_802_3_hdr *hdr = (struct ebt_802_3_hdr *)skb->mac.ethernet;
-+ uint16_t type = hdr->llc.ui.ctrl & IS_UI ? hdr->llc.ui.type : hdr->llc.ni.type;
-+
-+ if (info->bitmask & EBT_802_3_SAP) {
-+ if (FWINV(info->sap != hdr->llc.ui.ssap, EBT_802_3_SAP))
-+ return EBT_NOMATCH;
-+ if (FWINV(info->sap != hdr->llc.ui.dsap, EBT_802_3_SAP))
-+ return EBT_NOMATCH;
-+ }
-+
-+ if (info->bitmask & EBT_802_3_TYPE) {
-+ if (!(hdr->llc.ui.dsap == CHECK_TYPE && hdr->llc.ui.ssap == CHECK_TYPE))
-+ return EBT_NOMATCH;
-+ if (FWINV(info->type != type, EBT_802_3_TYPE))
-+ return EBT_NOMATCH;
-+ }
-+
-+ return EBT_MATCH;
-+}
-+
-+static struct ebt_match filter_802_3;
-+static int ebt_802_3_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_802_3_info *info = (struct ebt_802_3_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_802_3_info)))
-+ return -EINVAL;
-+ if (info->bitmask & ~EBT_802_3_MASK || info->invflags & ~EBT_802_3_MASK)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static struct ebt_match filter_802_3 =
-+{
-+ .name = EBT_802_3_MATCH,
-+ .match = ebt_filter_802_3,
-+ .check = ebt_802_3_check,
-+ .me = THIS_MODULE,
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_match(&filter_802_3);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_802_3);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_mark.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,66 @@
-+/*
-+ * ebt_mark
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * July, 2002
-+ *
-+ */
-+
-+// The mark target can be used in any chain
-+// I believe adding a mangle table just for marking is total overkill
-+// Marking a frame doesn't really change anything in the frame anyway
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_mark_t.h>
-+#include <linux/module.h>
-+
-+static int ebt_target_mark(struct sk_buff **pskb, unsigned int hooknr,
-+ const struct net_device *in, const struct net_device *out,
-+ const void *data, unsigned int datalen)
-+{
-+ struct ebt_mark_t_info *info = (struct ebt_mark_t_info *)data;
-+
-+ if ((*pskb)->nfmark != info->mark) {
-+ (*pskb)->nfmark = info->mark;
-+ (*pskb)->nfcache |= NFC_ALTERED;
-+ }
-+ return info->target;
-+}
-+
-+static int ebt_target_mark_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_mark_t_info *info = (struct ebt_mark_t_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_mark_t_info)))
-+ return -EINVAL;
-+ if (BASE_CHAIN && info->target == EBT_RETURN)
-+ return -EINVAL;
-+ CLEAR_BASE_CHAIN_BIT;
-+ if (INVALID_TARGET)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_target mark_target =
-+{
-+ {NULL, NULL}, EBT_MARK_TARGET, ebt_target_mark,
-+ ebt_target_mark_check, NULL, THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_target(&mark_target);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_target(&mark_target);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_mark_m.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,61 @@
-+/*
-+ * ebt_mark_m
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * July, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_mark_m.h>
-+#include <linux/module.h>
-+
-+static int ebt_filter_mark(const struct sk_buff *skb,
-+ const struct net_device *in, const struct net_device *out, const void *data,
-+ unsigned int datalen)
-+{
-+ struct ebt_mark_m_info *info = (struct ebt_mark_m_info *) data;
-+
-+ if (info->bitmask & EBT_MARK_OR)
-+ return !(!!(skb->nfmark & info->mask) ^ info->invert);
-+ return !(((skb->nfmark & info->mask) == info->mark) ^ info->invert);
-+}
-+
-+static int ebt_mark_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_mark_m_info *info = (struct ebt_mark_m_info *) data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_mark_m_info)))
-+ return -EINVAL;
-+ if (info->bitmask & ~EBT_MARK_MASK)
-+ return -EINVAL;
-+ if ((info->bitmask & EBT_MARK_OR) && (info->bitmask & EBT_MARK_AND))
-+ return -EINVAL;
-+ if (!info->bitmask)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_match filter_mark =
-+{
-+ {NULL, NULL}, EBT_MARK_MATCH, ebt_filter_mark, ebt_mark_check, NULL,
-+ THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_match(&filter_mark);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_mark);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_pkttype.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,60 @@
-+/*
-+ * ebt_pkttype
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bdschuym@pandora.be>
-+ *
-+ * April, 2003
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_pkttype.h>
-+#include <linux/module.h>
-+
-+static int ebt_filter_pkttype(const struct sk_buff *skb,
-+ const struct net_device *in,
-+ const struct net_device *out,
-+ const void *data,
-+ unsigned int datalen)
-+{
-+ struct ebt_pkttype_info *info = (struct ebt_pkttype_info *)data;
-+
-+ return (skb->pkt_type != info->pkt_type) ^ info->invert;
-+}
-+
-+static int ebt_pkttype_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_pkttype_info *info = (struct ebt_pkttype_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_pkttype_info)))
-+ return -EINVAL;
-+ if (info->invert != 0 && info->invert != 1)
-+ return -EINVAL;
-+ /* Allow any pkt_type value */
-+ return 0;
-+}
-+
-+static struct ebt_match filter_pkttype =
-+{
-+ .name = EBT_PKTTYPE_MATCH,
-+ .match = ebt_filter_pkttype,
-+ .check = ebt_pkttype_check,
-+ .me = THIS_MODULE,
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_match(&filter_pkttype);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_pkttype);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_stp.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,191 @@
-+/*
-+ * ebt_stp
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bdschuym@pandora.be>
-+ * Stephen Hemminger <shemminger@osdl.org>
-+ *
-+ * June, 2003
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_stp.h>
-+#include <linux/module.h>
-+
-+#define BPDU_TYPE_CONFIG 0
-+#define BPDU_TYPE_TCN 0x80
-+
-+struct stp_header {
-+ uint8_t dsap;
-+ uint8_t ssap;
-+ uint8_t ctrl;
-+ uint8_t pid;
-+ uint8_t vers;
-+ uint8_t type;
-+};
-+
-+struct stp_config_pdu {
-+ uint8_t flags;
-+ uint8_t root[8];
-+ uint8_t root_cost[4];
-+ uint8_t sender[8];
-+ uint8_t port[2];
-+ uint8_t msg_age[2];
-+ uint8_t max_age[2];
-+ uint8_t hello_time[2];
-+ uint8_t forward_delay[2];
-+};
-+
-+#define NR16(p) (p[0] << 8 | p[1])
-+#define NR32(p) ((p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3])
-+
-+static int ebt_filter_config(struct ebt_stp_info *info,
-+ struct stp_config_pdu *stpc)
-+{
-+ struct ebt_stp_config_info *c;
-+ uint16_t v16;
-+ uint32_t v32;
-+ int verdict, i;
-+
-+ c = &info->config;
-+ if ((info->bitmask & EBT_STP_FLAGS) &&
-+ FWINV(c->flags != stpc->flags, EBT_STP_FLAGS))
-+ return EBT_NOMATCH;
-+ if (info->bitmask & EBT_STP_ROOTPRIO) {
-+ v16 = NR16(stpc->root);
-+ if (FWINV(v16 < c->root_priol ||
-+ v16 > c->root_priou, EBT_STP_ROOTPRIO))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_ROOTADDR) {
-+ verdict = 0;
-+ for (i = 0; i < 6; i++)
-+ verdict |= (stpc->root[2+i] ^ c->root_addr[i]) &
-+ c->root_addrmsk[i];
-+ if (FWINV(verdict != 0, EBT_STP_ROOTADDR))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_ROOTCOST) {
-+ v32 = NR32(stpc->root_cost);
-+ if (FWINV(v32 < c->root_costl ||
-+ v32 > c->root_costu, EBT_STP_ROOTCOST))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_SENDERPRIO) {
-+ v16 = NR16(stpc->sender);
-+ if (FWINV(v16 < c->sender_priol ||
-+ v16 > c->sender_priou, EBT_STP_SENDERPRIO))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_SENDERADDR) {
-+ verdict = 0;
-+ for (i = 0; i < 6; i++)
-+ verdict |= (stpc->sender[2+i] ^ c->sender_addr[i]) &
-+ c->sender_addrmsk[i];
-+ if (FWINV(verdict != 0, EBT_STP_SENDERADDR))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_PORT) {
-+ v16 = NR16(stpc->port);
-+ if (FWINV(v16 < c->portl ||
-+ v16 > c->portu, EBT_STP_PORT))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_MSGAGE) {
-+ v16 = NR16(stpc->msg_age);
-+ if (FWINV(v16 < c->msg_agel ||
-+ v16 > c->msg_ageu, EBT_STP_MSGAGE))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_MAXAGE) {
-+ v16 = NR16(stpc->max_age);
-+ if (FWINV(v16 < c->max_agel ||
-+ v16 > c->max_ageu, EBT_STP_MAXAGE))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_HELLOTIME) {
-+ v16 = NR16(stpc->hello_time);
-+ if (FWINV(v16 < c->hello_timel ||
-+ v16 > c->hello_timeu, EBT_STP_HELLOTIME))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_STP_FWDD) {
-+ v16 = NR16(stpc->forward_delay);
-+ if (FWINV(v16 < c->forward_delayl ||
-+ v16 > c->forward_delayu, EBT_STP_FWDD))
-+ return EBT_NOMATCH;
-+ }
-+ return EBT_MATCH;
-+}
-+
-+static int ebt_filter_stp(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *data, unsigned int datalen)
-+{
-+ struct ebt_stp_info *info = (struct ebt_stp_info *)data;
-+ struct stp_header stph;
-+ uint8_t header[6] = {0x42, 0x42, 0x03, 0x00, 0x00, 0x00};
-+ if (skb_copy_bits(skb, 0, &stph, sizeof(stph)))
-+ return EBT_NOMATCH;
-+
-+ /* The stp code only considers these */
-+ if (memcmp(&stph, header, sizeof(header)))
-+ return EBT_NOMATCH;
-+
-+ if (info->bitmask & EBT_STP_TYPE
-+ && FWINV(info->type != stph.type, EBT_STP_TYPE))
-+ return EBT_NOMATCH;
-+
-+ if (stph.type == BPDU_TYPE_CONFIG &&
-+ info->bitmask & EBT_STP_CONFIG_MASK) {
-+ struct stp_config_pdu stpc;
-+
-+ if (skb_copy_bits(skb, sizeof(stph), &stpc, sizeof(stpc)))
-+ return EBT_NOMATCH;
-+ return ebt_filter_config(info, &stpc);
-+ }
-+ return EBT_MATCH;
-+}
-+
-+static int ebt_stp_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_stp_info *info = (struct ebt_stp_info *)data;
-+ int len = EBT_ALIGN(sizeof(struct ebt_stp_info));
-+ uint8_t bridge_ula[6] = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 };
-+ uint8_t msk[6] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-+
-+ if (info->bitmask & ~EBT_STP_MASK || info->invflags & ~EBT_STP_MASK ||
-+ !(info->bitmask & EBT_STP_MASK))
-+ return -EINVAL;
-+ if (datalen != len)
-+ return -EINVAL;
-+ /* Make sure the match only receives stp frames */
-+ if (memcmp(e->destmac, bridge_ula, ETH_ALEN) ||
-+ memcmp(e->destmsk, msk, ETH_ALEN) || !(e->bitmask & EBT_DESTMAC))
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static struct ebt_match filter_stp =
-+{
-+ .name = EBT_STP_MATCH,
-+ .match = ebt_filter_stp,
-+ .check = ebt_stp_check,
-+ .me = THIS_MODULE,
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_match(&filter_stp);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_stp);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_redirect.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,71 @@
-+/*
-+ * ebt_redirect
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_redirect.h>
-+#include <linux/module.h>
-+#include <net/sock.h>
-+#include "../br_private.h"
-+
-+static int ebt_target_redirect(struct sk_buff **pskb, unsigned int hooknr,
-+ const struct net_device *in, const struct net_device *out,
-+ const void *data, unsigned int datalen)
-+{
-+ struct ebt_redirect_info *info = (struct ebt_redirect_info *)data;
-+
-+ if (hooknr != NF_BR_BROUTING)
-+ memcpy((**pskb).mac.ethernet->h_dest,
-+ in->br_port->br->dev.dev_addr, ETH_ALEN);
-+ else {
-+ memcpy((**pskb).mac.ethernet->h_dest,
-+ in->dev_addr, ETH_ALEN);
-+ (*pskb)->pkt_type = PACKET_HOST;
-+ }
-+ return info->target;
-+}
-+
-+static int ebt_target_redirect_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_redirect_info *info = (struct ebt_redirect_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_redirect_info)))
-+ return -EINVAL;
-+ if (BASE_CHAIN && info->target == EBT_RETURN)
-+ return -EINVAL;
-+ CLEAR_BASE_CHAIN_BIT;
-+ if ( (strcmp(tablename, "nat") || hookmask & ~(1 << NF_BR_PRE_ROUTING)) &&
-+ (strcmp(tablename, "broute") || hookmask & ~(1 << NF_BR_BROUTING)) )
-+ return -EINVAL;
-+ if (INVALID_TARGET)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_target redirect_target =
-+{
-+ {NULL, NULL}, EBT_REDIRECT_TARGET, ebt_target_redirect,
-+ ebt_target_redirect_check, NULL, THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_target(&redirect_target);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_target(&redirect_target);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_arp.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,149 @@
-+/*
-+ * ebt_arp
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ * Tim Gardner <timg@tpi.com>
-+ *
-+ * April, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_arp.h>
-+#include <linux/if_arp.h>
-+#include <linux/if_ether.h>
-+#include <linux/module.h>
-+
-+static int ebt_filter_arp(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *data, unsigned int datalen)
-+{
-+ struct ebt_arp_info *info = (struct ebt_arp_info *)data;
-+
-+ if (info->bitmask & EBT_ARP_OPCODE && FWINV(info->opcode !=
-+ ((*skb).nh.arph)->ar_op, EBT_ARP_OPCODE))
-+ return EBT_NOMATCH;
-+ if (info->bitmask & EBT_ARP_HTYPE && FWINV(info->htype !=
-+ ((*skb).nh.arph)->ar_hrd, EBT_ARP_HTYPE))
-+ return EBT_NOMATCH;
-+ if (info->bitmask & EBT_ARP_PTYPE && FWINV(info->ptype !=
-+ ((*skb).nh.arph)->ar_pro, EBT_ARP_PTYPE))
-+ return EBT_NOMATCH;
-+
-+ if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP))
-+ {
-+ uint32_t arp_len = sizeof(struct arphdr) +
-+ (2 * (((*skb).nh.arph)->ar_hln)) +
-+ (2 * (((*skb).nh.arph)->ar_pln));
-+ uint32_t dst;
-+ uint32_t src;
-+
-+ // Make sure the packet is long enough.
-+ if ((((*skb).nh.raw) + arp_len) > (*skb).tail)
-+ return EBT_NOMATCH;
-+ // IPv4 addresses are always 4 bytes.
-+ if (((*skb).nh.arph)->ar_pln != sizeof(uint32_t))
-+ return EBT_NOMATCH;
-+
-+ if (info->bitmask & EBT_ARP_SRC_IP) {
-+ memcpy(&src, ((*skb).nh.raw) + sizeof(struct arphdr) +
-+ ((*skb).nh.arph)->ar_hln, sizeof(uint32_t));
-+ if (FWINV(info->saddr != (src & info->smsk),
-+ EBT_ARP_SRC_IP))
-+ return EBT_NOMATCH;
-+ }
-+
-+ if (info->bitmask & EBT_ARP_DST_IP) {
-+ memcpy(&dst, ((*skb).nh.raw)+sizeof(struct arphdr) +
-+ (2*(((*skb).nh.arph)->ar_hln)) +
-+ (((*skb).nh.arph)->ar_pln), sizeof(uint32_t));
-+ if (FWINV(info->daddr != (dst & info->dmsk),
-+ EBT_ARP_DST_IP))
-+ return EBT_NOMATCH;
-+ }
-+ }
-+
-+ if (info->bitmask & (EBT_ARP_SRC_MAC | EBT_ARP_DST_MAC))
-+ {
-+ uint32_t arp_len = sizeof(struct arphdr) +
-+ (2 * (((*skb).nh.arph)->ar_hln)) +
-+ (2 * (((*skb).nh.arph)->ar_pln));
-+ unsigned char dst[ETH_ALEN];
-+ unsigned char src[ETH_ALEN];
-+
-+ // Make sure the packet is long enough.
-+ if ((((*skb).nh.raw) + arp_len) > (*skb).tail)
-+ return EBT_NOMATCH;
-+ // MAC addresses are 6 bytes.
-+ if (((*skb).nh.arph)->ar_hln != ETH_ALEN)
-+ return EBT_NOMATCH;
-+ if (info->bitmask & EBT_ARP_SRC_MAC) {
-+ uint8_t verdict, i;
-+
-+ memcpy(&src, ((*skb).nh.raw) +
-+ sizeof(struct arphdr),
-+ ETH_ALEN);
-+ verdict = 0;
-+ for (i = 0; i < 6; i++)
-+ verdict |= (src[i] ^ info->smaddr[i]) &
-+ info->smmsk[i];
-+ if (FWINV(verdict != 0, EBT_ARP_SRC_MAC))
-+ return EBT_NOMATCH;
-+ }
-+
-+ if (info->bitmask & EBT_ARP_DST_MAC) {
-+ uint8_t verdict, i;
-+
-+ memcpy(&dst, ((*skb).nh.raw) +
-+ sizeof(struct arphdr) +
-+ (((*skb).nh.arph)->ar_hln) +
-+ (((*skb).nh.arph)->ar_pln),
-+ ETH_ALEN);
-+ verdict = 0;
-+ for (i = 0; i < 6; i++)
-+ verdict |= (dst[i] ^ info->dmaddr[i]) &
-+ info->dmmsk[i];
-+ if (FWINV(verdict != 0, EBT_ARP_DST_MAC))
-+ return EBT_NOMATCH;
-+ }
-+ }
-+
-+ return EBT_MATCH;
-+}
-+
-+static int ebt_arp_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_arp_info *info = (struct ebt_arp_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_arp_info)))
-+ return -EINVAL;
-+ if ((e->ethproto != __constant_htons(ETH_P_ARP) &&
-+ e->ethproto != __constant_htons(ETH_P_RARP)) ||
-+ e->invflags & EBT_IPROTO)
-+ return -EINVAL;
-+ if (info->bitmask & ~EBT_ARP_MASK || info->invflags & ~EBT_ARP_MASK)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_match filter_arp =
-+{
-+ {NULL, NULL}, EBT_ARP_MATCH, ebt_filter_arp, ebt_arp_check, NULL,
-+ THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_match(&filter_arp);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_arp);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_ip.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,121 @@
-+/*
-+ * ebt_ip
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ * Changes:
-+ * added ip-sport and ip-dport
-+ * Innominate Security Technologies AG <mhopf@innominate.com>
-+ * September, 2002
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_ip.h>
-+#include <linux/ip.h>
-+#include <linux/in.h>
-+#include <linux/module.h>
-+
-+struct tcpudphdr {
-+ uint16_t src;
-+ uint16_t dst;
-+};
-+
-+union h_u {
-+ unsigned char *raw;
-+ struct tcpudphdr *tuh;
-+};
-+
-+static int ebt_filter_ip(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *data,
-+ unsigned int datalen)
-+{
-+ struct ebt_ip_info *info = (struct ebt_ip_info *)data;
-+
-+ if (info->bitmask & EBT_IP_TOS &&
-+ FWINV(info->tos != ((*skb).nh.iph)->tos, EBT_IP_TOS))
-+ return EBT_NOMATCH;
-+ if (info->bitmask & EBT_IP_PROTO) {
-+ if (FWINV(info->protocol != ((*skb).nh.iph)->protocol,
-+ EBT_IP_PROTO))
-+ return EBT_NOMATCH;
-+ if ( info->protocol == IPPROTO_TCP ||
-+ info->protocol == IPPROTO_UDP )
-+ {
-+ union h_u h;
-+ h.raw = skb->data + skb->nh.iph->ihl*4;
-+ if (info->bitmask & EBT_IP_DPORT) {
-+ uint16_t port = ntohs(h.tuh->dst);
-+ if (FWINV(port < info->dport[0] ||
-+ port > info->dport[1],
-+ EBT_IP_DPORT))
-+ return EBT_NOMATCH;
-+ }
-+ if (info->bitmask & EBT_IP_SPORT) {
-+ uint16_t port = ntohs(h.tuh->src);
-+ if (FWINV(port < info->sport[0] ||
-+ port > info->sport[1],
-+ EBT_IP_SPORT))
-+ return EBT_NOMATCH;
-+ }
-+ }
-+ }
-+ if (info->bitmask & EBT_IP_SOURCE &&
-+ FWINV((((*skb).nh.iph)->saddr & info->smsk) !=
-+ info->saddr, EBT_IP_SOURCE))
-+ return EBT_NOMATCH;
-+ if ((info->bitmask & EBT_IP_DEST) &&
-+ FWINV((((*skb).nh.iph)->daddr & info->dmsk) !=
-+ info->daddr, EBT_IP_DEST))
-+ return EBT_NOMATCH;
-+ return EBT_MATCH;
-+}
-+
-+static int ebt_ip_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_ip_info *info = (struct ebt_ip_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_ip_info)))
-+ return -EINVAL;
-+ if (e->ethproto != __constant_htons(ETH_P_IP) ||
-+ e->invflags & EBT_IPROTO)
-+ return -EINVAL;
-+ if (info->bitmask & ~EBT_IP_MASK || info->invflags & ~EBT_IP_MASK)
-+ return -EINVAL;
-+ if (info->bitmask & (EBT_IP_DPORT | EBT_IP_SPORT)) {
-+ if (!info->bitmask & EBT_IPROTO)
-+ return -EINVAL;
-+ if (info->protocol != IPPROTO_TCP &&
-+ info->protocol != IPPROTO_UDP)
-+ return -EINVAL;
-+ }
-+ if (info->bitmask & EBT_IP_DPORT && info->dport[0] > info->dport[1])
-+ return -EINVAL;
-+ if (info->bitmask & EBT_IP_SPORT && info->sport[0] > info->sport[1])
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_match filter_ip =
-+{
-+ {NULL, NULL}, EBT_IP_MATCH, ebt_filter_ip, ebt_ip_check, NULL,
-+ THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_match(&filter_ip);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_ip);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_vlan.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,259 @@
-+/*
-+ * Description: EBTables 802.1Q match extension kernelspace module.
-+ * Authors: Nick Fedchik <nick@fedchik.org.ua>
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/if_vlan.h>
-+#include <linux/module.h>
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_vlan.h>
-+
-+static unsigned char debug;
-+#define MODULE_VERSION "0.6"
-+
-+MODULE_PARM(debug, "0-1b");
-+MODULE_PARM_DESC(debug, "debug=1 is turn on debug messages");
-+MODULE_AUTHOR("Nick Fedchik <nick@fedchik.org.ua>");
-+MODULE_DESCRIPTION("802.1Q match module (ebtables extension), v"
-+ MODULE_VERSION);
-+MODULE_LICENSE("GPL");
-+
-+
-+#define DEBUG_MSG(args...) if (debug) printk (KERN_DEBUG "ebt_vlan: " args)
-+#define INV_FLAG(_inv_flag_) (info->invflags & _inv_flag_) ? "!" : ""
-+#define GET_BITMASK(_BIT_MASK_) info->bitmask & _BIT_MASK_
-+#define SET_BITMASK(_BIT_MASK_) info->bitmask |= _BIT_MASK_
-+#define EXIT_ON_MISMATCH(_MATCH_,_MASK_) if (!((info->_MATCH_ == _MATCH_)^!!(info->invflags & _MASK_))) return 1;
-+
-+/*
-+ * Function description: ebt_filter_vlan() is main engine for
-+ * checking passed 802.1Q frame according to
-+ * the passed extension parameters (in the *data buffer)
-+ * ebt_filter_vlan() is called after successfull check the rule params
-+ * by ebt_check_vlan() function.
-+ * Parameters:
-+ * const struct sk_buff *skb - pointer to passed ethernet frame buffer
-+ * const void *data - pointer to passed extension parameters
-+ * unsigned int datalen - length of passed *data buffer
-+ * const struct net_device *in -
-+ * const struct net_device *out -
-+ * const struct ebt_counter *c -
-+ * Returned values:
-+ * 0 - ok (all rule params matched)
-+ * 1 - miss (rule params not acceptable to the parsed frame)
-+ */
-+static int
-+ebt_filter_vlan(const struct sk_buff *skb,
-+ const struct net_device *in,
-+ const struct net_device *out,
-+ const void *data, unsigned int datalen)
-+{
-+ struct ebt_vlan_info *info = (struct ebt_vlan_info *) data; /* userspace data */
-+ struct vlan_ethhdr *frame = (struct vlan_ethhdr *) skb->mac.raw; /* Passed tagged frame */
-+
-+ unsigned short TCI; /* Whole TCI, given from parsed frame */
-+ unsigned short id; /* VLAN ID, given from frame TCI */
-+ unsigned char prio; /* user_priority, given from frame TCI */
-+ unsigned short encap; /* VLAN encapsulated Type/Length field, given from orig frame */
-+
-+ /*
-+ * Tag Control Information (TCI) consists of the following elements:
-+ * - User_priority. The user_priority field is three bits in length,
-+ * interpreted as a binary number.
-+ * - Canonical Format Indicator (CFI). The Canonical Format Indicator
-+ * (CFI) is a single bit flag value. Currently ignored.
-+ * - VLAN Identifier (VID). The VID is encoded as
-+ * an unsigned binary number.
-+ */
-+ TCI = ntohs(frame->h_vlan_TCI);
-+ id = TCI & VLAN_VID_MASK;
-+ prio = (TCI >> 13) & 0x7;
-+ encap = frame->h_vlan_encapsulated_proto;
-+
-+ /*
-+ * Checking VLAN Identifier (VID)
-+ */
-+ if (GET_BITMASK(EBT_VLAN_ID)) { /* Is VLAN ID parsed? */
-+ EXIT_ON_MISMATCH(id, EBT_VLAN_ID);
-+ }
-+ /*
-+ * Checking user_priority
-+ */
-+ if (GET_BITMASK(EBT_VLAN_PRIO)) { /* Is VLAN user_priority parsed? */
-+ EXIT_ON_MISMATCH(prio, EBT_VLAN_PRIO);
-+ }
-+ /*
-+ * Checking Encapsulated Proto (Length/Type) field
-+ */
-+ if (GET_BITMASK(EBT_VLAN_ENCAP)) { /* Is VLAN Encap parsed? */
-+ EXIT_ON_MISMATCH(encap, EBT_VLAN_ENCAP);
-+ }
-+ /*
-+ * All possible extension parameters was parsed.
-+ * If rule never returned by missmatch, then all ok.
-+ */
-+ return 0;
-+}
-+
-+/*
-+ * Function description: ebt_vlan_check() is called when userspace
-+ * delivers the table entry to the kernel,
-+ * and to check that userspace doesn't give a bad table.
-+ * Parameters:
-+ * const char *tablename - table name string
-+ * unsigned int hooknr - hook number
-+ * const struct ebt_entry *e - ebtables entry basic set
-+ * const void *data - pointer to passed extension parameters
-+ * unsigned int datalen - length of passed *data buffer
-+ * Returned values:
-+ * 0 - ok (all delivered rule params are correct)
-+ * 1 - miss (rule params is out of range, invalid, incompatible, etc.)
-+ */
-+static int
-+ebt_check_vlan(const char *tablename,
-+ unsigned int hooknr,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_vlan_info *info = (struct ebt_vlan_info *) data;
-+
-+ /*
-+ * Parameters buffer overflow check
-+ */
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_vlan_info))) {
-+ DEBUG_MSG
-+ ("passed size %d is not eq to ebt_vlan_info (%d)\n",
-+ datalen, sizeof(struct ebt_vlan_info));
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Is it 802.1Q frame checked?
-+ */
-+ if (e->ethproto != __constant_htons(ETH_P_8021Q)) {
-+ DEBUG_MSG
-+ ("passed entry proto %2.4X is not 802.1Q (8100)\n",
-+ (unsigned short) ntohs(e->ethproto));
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Check for bitmask range
-+ * True if even one bit is out of mask
-+ */
-+ if (info->bitmask & ~EBT_VLAN_MASK) {
-+ DEBUG_MSG("bitmask %2X is out of mask (%2X)\n",
-+ info->bitmask, EBT_VLAN_MASK);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Check for inversion flags range
-+ */
-+ if (info->invflags & ~EBT_VLAN_MASK) {
-+ DEBUG_MSG("inversion flags %2X is out of mask (%2X)\n",
-+ info->invflags, EBT_VLAN_MASK);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Reserved VLAN ID (VID) values
-+ * -----------------------------
-+ * 0 - The null VLAN ID.
-+ * 1 - The default Port VID (PVID)
-+ * 0x0FFF - Reserved for implementation use.
-+ * if_vlan.h: VLAN_GROUP_ARRAY_LEN 4096.
-+ */
-+ if (GET_BITMASK(EBT_VLAN_ID)) { /* when vlan-id param was spec-ed */
-+ if (!!info->id) { /* if id!=0 => check vid range */
-+ if (info->id > VLAN_GROUP_ARRAY_LEN) {
-+ DEBUG_MSG
-+ ("id %d is out of range (1-4096)\n",
-+ info->id);
-+ return -EINVAL;
-+ }
-+ /*
-+ * Note: This is valid VLAN-tagged frame point.
-+ * Any value of user_priority are acceptable,
-+ * but should be ignored according to 802.1Q Std.
-+ * So we just drop the prio flag.
-+ */
-+ info->bitmask &= ~EBT_VLAN_PRIO;
-+ }
-+ /*
-+ * Else, id=0 (null VLAN ID) => user_priority range (any?)
-+ */
-+ }
-+
-+ if (GET_BITMASK(EBT_VLAN_PRIO)) {
-+ if ((unsigned char) info->prio > 7) {
-+ DEBUG_MSG
-+ ("prio %d is out of range (0-7)\n",
-+ info->prio);
-+ return -EINVAL;
-+ }
-+ }
-+ /*
-+ * Check for encapsulated proto range - it is possible to be
-+ * any value for u_short range.
-+ * if_ether.h: ETH_ZLEN 60 - Min. octets in frame sans FCS
-+ */
-+ if (GET_BITMASK(EBT_VLAN_ENCAP)) {
-+ if ((unsigned short) ntohs(info->encap) < ETH_ZLEN) {
-+ DEBUG_MSG
-+ ("encap frame length %d is less than minimal\n",
-+ ntohs(info->encap));
-+ return -EINVAL;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static struct ebt_match filter_vlan = {
-+ {NULL, NULL},
-+ EBT_VLAN_MATCH,
-+ ebt_filter_vlan,
-+ ebt_check_vlan,
-+ NULL,
-+ THIS_MODULE
-+};
-+
-+/*
-+ * Module initialization function.
-+ */
-+static int __init init(void)
-+{
-+ DEBUG_MSG("ebtables 802.1Q extension module v"
-+ MODULE_VERSION "\n");
-+ DEBUG_MSG("module debug=%d\n", !!debug);
-+ return ebt_register_match(&filter_vlan);
-+}
-+
-+/*
-+ * Module "finalization" function
-+ */
-+static void __exit fini(void)
-+{
-+ ebt_unregister_match(&filter_vlan);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+
-+EXPORT_NO_SYMBOLS;
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_log.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,152 @@
-+/*
-+ * ebt_log
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_log.h>
-+#include <linux/module.h>
-+#include <linux/ip.h>
-+#include <linux/in.h>
-+#include <linux/if_arp.h>
-+#include <linux/spinlock.h>
-+
-+static spinlock_t ebt_log_lock = SPIN_LOCK_UNLOCKED;
-+
-+static int ebt_log_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_log_info *info = (struct ebt_log_info *)data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_log_info)))
-+ return -EINVAL;
-+ if (info->bitmask & ~EBT_LOG_MASK)
-+ return -EINVAL;
-+ if (info->loglevel >= 8)
-+ return -EINVAL;
-+ info->prefix[EBT_LOG_PREFIX_SIZE - 1] = '\0';
-+ return 0;
-+}
-+
-+struct tcpudphdr
-+{
-+ uint16_t src;
-+ uint16_t dst;
-+};
-+
-+struct arppayload
-+{
-+ unsigned char mac_src[ETH_ALEN];
-+ unsigned char ip_src[4];
-+ unsigned char mac_dst[ETH_ALEN];
-+ unsigned char ip_dst[4];
-+};
-+
-+static void print_MAC(unsigned char *p)
-+{
-+ int i;
-+
-+ for (i = 0; i < ETH_ALEN; i++, p++)
-+ printk("%02x%c", *p, i == ETH_ALEN - 1 ? ' ':':');
-+}
-+
-+#define myNIPQUAD(a) a[0], a[1], a[2], a[3]
-+static void ebt_log(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *data, unsigned int datalen)
-+{
-+ struct ebt_log_info *info = (struct ebt_log_info *)data;
-+ char level_string[4] = "< >";
-+ level_string[1] = '0' + info->loglevel;
-+
-+ spin_lock_bh(&ebt_log_lock);
-+ printk(level_string);
-+ printk("%s IN=%s OUT=%s ", info->prefix, in ? in->name : "",
-+ out ? out->name : "");
-+
-+ printk("MAC source = ");
-+ print_MAC((skb->mac.ethernet)->h_source);
-+ printk("MAC dest = ");
-+ print_MAC((skb->mac.ethernet)->h_dest);
-+
-+ printk("proto = 0x%04x", ntohs(((*skb).mac.ethernet)->h_proto));
-+
-+ if ((info->bitmask & EBT_LOG_IP) && skb->mac.ethernet->h_proto ==
-+ htons(ETH_P_IP)){
-+ struct iphdr *iph = skb->nh.iph;
-+ printk(" IP SRC=%u.%u.%u.%u IP DST=%u.%u.%u.%u,",
-+ NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
-+ printk(" IP tos=0x%02X, IP proto=%d", iph->tos, iph->protocol);
-+ if (iph->protocol == IPPROTO_TCP ||
-+ iph->protocol == IPPROTO_UDP) {
-+ struct tcpudphdr *ports = (struct tcpudphdr *)(skb->data + iph->ihl*4);
-+
-+ if (skb->data + iph->ihl*4 > skb->tail) {
-+ printk(" INCOMPLETE TCP/UDP header");
-+ goto out;
-+ }
-+ printk(" SPT=%u DPT=%u", ntohs(ports->src),
-+ ntohs(ports->dst));
-+ }
-+ goto out;
-+ }
-+
-+ if ((info->bitmask & EBT_LOG_ARP) &&
-+ ((skb->mac.ethernet->h_proto == __constant_htons(ETH_P_ARP)) ||
-+ (skb->mac.ethernet->h_proto == __constant_htons(ETH_P_RARP)))) {
-+ struct arphdr * arph = skb->nh.arph;
-+ printk(" ARP HTYPE=%d, PTYPE=0x%04x, OPCODE=%d",
-+ ntohs(arph->ar_hrd), ntohs(arph->ar_pro),
-+ ntohs(arph->ar_op));
-+ /* If it's for Ethernet and the lengths are OK,
-+ * then log the ARP payload */
-+ if (arph->ar_hrd == __constant_htons(1) &&
-+ arph->ar_hln == ETH_ALEN &&
-+ arph->ar_pln == sizeof(uint32_t)) {
-+ struct arppayload *arpp = (struct arppayload *)(skb->data + sizeof(*arph));
-+
-+ if (skb->data + sizeof(*arph) > skb->tail) {
-+ printk(" INCOMPLETE ARP header");
-+ goto out;
-+ }
-+
-+ printk(" ARP MAC SRC=");
-+ print_MAC(arpp->mac_src);
-+ printk(" ARP IP SRC=%u.%u.%u.%u",
-+ myNIPQUAD(arpp->ip_src));
-+ printk(" ARP MAC DST=");
-+ print_MAC(arpp->mac_dst);
-+ printk(" ARP IP DST=%u.%u.%u.%u",
-+ myNIPQUAD(arpp->ip_dst));
-+ }
-+
-+ }
-+out:
-+ printk("\n");
-+ spin_unlock_bh(&ebt_log_lock);
-+}
-+
-+static struct ebt_watcher log =
-+{
-+ {NULL, NULL}, EBT_LOG_WATCHER, ebt_log, ebt_log_check, NULL,
-+ THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_watcher(&log);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_watcher(&log);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_snat.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,64 @@
-+/*
-+ * ebt_snat
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * June, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_nat.h>
-+#include <linux/module.h>
-+
-+static int ebt_target_snat(struct sk_buff **pskb, unsigned int hooknr,
-+ const struct net_device *in, const struct net_device *out,
-+ const void *data, unsigned int datalen)
-+{
-+ struct ebt_nat_info *info = (struct ebt_nat_info *) data;
-+
-+ memcpy(((**pskb).mac.ethernet)->h_source, info->mac,
-+ ETH_ALEN * sizeof(unsigned char));
-+ return info->target;
-+}
-+
-+static int ebt_target_snat_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_nat_info *info = (struct ebt_nat_info *) data;
-+
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_nat_info)))
-+ return -EINVAL;
-+ if (BASE_CHAIN && info->target == EBT_RETURN)
-+ return -EINVAL;
-+ CLEAR_BASE_CHAIN_BIT;
-+ if (strcmp(tablename, "nat"))
-+ return -EINVAL;
-+ if (hookmask & ~(1 << NF_BR_POST_ROUTING))
-+ return -EINVAL;
-+ if (INVALID_TARGET)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_target snat =
-+{
-+ {NULL, NULL}, EBT_SNAT_TARGET, ebt_target_snat, ebt_target_snat_check,
-+ NULL, THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_target(&snat);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_target(&snat);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebt_dnat.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,65 @@
-+/*
-+ * ebt_dnat
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * June, 2002
-+ *
-+ */
-+
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/netfilter_bridge/ebt_nat.h>
-+#include <linux/module.h>
-+#include <net/sock.h>
-+
-+static int ebt_target_dnat(struct sk_buff **pskb, unsigned int hooknr,
-+ const struct net_device *in, const struct net_device *out,
-+ const void *data, unsigned int datalen)
-+{
-+ struct ebt_nat_info *info = (struct ebt_nat_info *)data;
-+
-+ memcpy(((**pskb).mac.ethernet)->h_dest, info->mac,
-+ ETH_ALEN * sizeof(unsigned char));
-+ return info->target;
-+}
-+
-+static int ebt_target_dnat_check(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *data, unsigned int datalen)
-+{
-+ struct ebt_nat_info *info = (struct ebt_nat_info *)data;
-+
-+ if (BASE_CHAIN && info->target == EBT_RETURN)
-+ return -EINVAL;
-+ CLEAR_BASE_CHAIN_BIT;
-+ if ( (strcmp(tablename, "nat") ||
-+ (hookmask & ~((1 << NF_BR_PRE_ROUTING) | (1 << NF_BR_LOCAL_OUT)))) &&
-+ (strcmp(tablename, "broute") || hookmask & ~(1 << NF_BR_BROUTING)) )
-+ return -EINVAL;
-+ if (datalen != EBT_ALIGN(sizeof(struct ebt_nat_info)))
-+ return -EINVAL;
-+ if (INVALID_TARGET)
-+ return -EINVAL;
-+ return 0;
-+}
-+
-+static struct ebt_target dnat =
-+{
-+ {NULL, NULL}, EBT_DNAT_TARGET, ebt_target_dnat, ebt_target_dnat_check,
-+ NULL, THIS_MODULE
-+};
-+
-+static int __init init(void)
-+{
-+ return ebt_register_target(&dnat);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ebt_unregister_target(&dnat);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+EXPORT_NO_SYMBOLS;
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/netfilter/ebtables.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,1490 @@
-+/*
-+ * ebtables
-+ *
-+ * Author:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * ebtables.c,v 2.0, July, 2002
-+ *
-+ * This code is stongly inspired on the iptables code which is
-+ * Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+// used for print_string
-+#include <linux/sched.h>
-+#include <linux/tty.h>
-+
-+#include <linux/kmod.h>
-+#include <linux/module.h>
-+#include <linux/vmalloc.h>
-+#include <linux/netfilter_bridge/ebtables.h>
-+#include <linux/spinlock.h>
-+#include <asm/uaccess.h>
-+#include <linux/smp.h>
-+#include <net/sock.h>
-+// needed for logical [in,out]-dev filtering
-+#include "../br_private.h"
-+
-+// list_named_find
-+#define ASSERT_READ_LOCK(x)
-+#define ASSERT_WRITE_LOCK(x)
-+#include <linux/netfilter_ipv4/listhelp.h>
-+
-+#if 0 // use this for remote debugging
-+// Copyright (C) 1998 by Ori Pomerantz
-+// Print the string to the appropriate tty, the one
-+// the current task uses
-+static void print_string(char *str)
-+{
-+ struct tty_struct *my_tty;
-+
-+ /* The tty for the current task */
-+ my_tty = current->tty;
-+ if (my_tty != NULL) {
-+ (*(my_tty->driver).write)(my_tty, 0, str, strlen(str));
-+ (*(my_tty->driver).write)(my_tty, 0, "\015\012", 2);
-+ }
-+}
-+
-+#define BUGPRINT(args) print_string(args);
-+#else
-+#define BUGPRINT(format, args...) printk("kernel msg: ebtables bug: please "\
-+ "report to author: "format, ## args)
-+// #define BUGPRINT(format, args...)
-+#endif
-+#define MEMPRINT(format, args...) printk("kernel msg: ebtables "\
-+ ": out of memory: "format, ## args)
-+// #define MEMPRINT(format, args...)
-+
-+
-+
-+// Each cpu has its own set of counters, so there is no need for write_lock in
-+// the softirq
-+// For reading or updating the counters, the user context needs to
-+// get a write_lock
-+
-+// The size of each set of counters is altered to get cache alignment
-+#define SMP_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
-+#define COUNTER_OFFSET(n) (SMP_ALIGN(n * sizeof(struct ebt_counter)))
-+#define COUNTER_BASE(c, n, cpu) ((struct ebt_counter *)(((char *)c) + \
-+ COUNTER_OFFSET(n) * cpu))
-+
-+
-+
-+static DECLARE_MUTEX(ebt_mutex);
-+static LIST_HEAD(ebt_tables);
-+static LIST_HEAD(ebt_targets);
-+static LIST_HEAD(ebt_matches);
-+static LIST_HEAD(ebt_watchers);
-+
-+static struct ebt_target ebt_standard_target =
-+{ {NULL, NULL}, EBT_STANDARD_TARGET, NULL, NULL, NULL, NULL};
-+
-+static inline int ebt_do_watcher (struct ebt_entry_watcher *w,
-+ const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out)
-+{
-+ w->u.watcher->watcher(skb, in, out, w->data,
-+ w->watcher_size);
-+ // watchers don't give a verdict
-+ return 0;
-+}
-+
-+static inline int ebt_do_match (struct ebt_entry_match *m,
-+ const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out)
-+{
-+ return m->u.match->match(skb, in, out, m->data,
-+ m->match_size);
-+}
-+
-+static inline int ebt_dev_check(char *entry, const struct net_device *device)
-+{
-+ if (*entry == '\0')
-+ return 0;
-+ if (!device)
-+ return 1;
-+ return !!strcmp(entry, device->name);
-+}
-+
-+#define FWINV2(bool,invflg) ((bool) ^ !!(e->invflags & invflg))
-+// process standard matches
-+static inline int ebt_basic_match(struct ebt_entry *e, struct ethhdr *h,
-+ const struct net_device *in, const struct net_device *out)
-+{
-+ int verdict, i;
-+
-+ if (e->bitmask & EBT_802_3) {
-+ if (FWINV2(ntohs(h->h_proto) >= 1536, EBT_IPROTO))
-+ return 1;
-+ } else if (!(e->bitmask & EBT_NOPROTO) &&
-+ FWINV2(e->ethproto != h->h_proto, EBT_IPROTO))
-+ return 1;
-+
-+ if (FWINV2(ebt_dev_check(e->in, in), EBT_IIN))
-+ return 1;
-+ if (FWINV2(ebt_dev_check(e->out, out), EBT_IOUT))
-+ return 1;
-+ if ((!in || !in->br_port) ? 0 : FWINV2(ebt_dev_check(
-+ e->logical_in, &in->br_port->br->dev), EBT_ILOGICALIN))
-+ return 1;
-+ if ((!out || !out->br_port) ? 0 : FWINV2(ebt_dev_check(
-+ e->logical_out, &out->br_port->br->dev), EBT_ILOGICALOUT))
-+ return 1;
-+
-+ if (e->bitmask & EBT_SOURCEMAC) {
-+ verdict = 0;
-+ for (i = 0; i < 6; i++)
-+ verdict |= (h->h_source[i] ^ e->sourcemac[i]) &
-+ e->sourcemsk[i];
-+ if (FWINV2(verdict != 0, EBT_ISOURCE) )
-+ return 1;
-+ }
-+ if (e->bitmask & EBT_DESTMAC) {
-+ verdict = 0;
-+ for (i = 0; i < 6; i++)
-+ verdict |= (h->h_dest[i] ^ e->destmac[i]) &
-+ e->destmsk[i];
-+ if (FWINV2(verdict != 0, EBT_IDEST) )
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+// Do some firewalling
-+unsigned int ebt_do_table (unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ struct ebt_table *table)
-+{
-+ int i, nentries;
-+ struct ebt_entry *point;
-+ struct ebt_counter *counter_base, *cb_base;
-+ struct ebt_entry_target *t;
-+ int verdict, sp = 0;
-+ struct ebt_chainstack *cs;
-+ struct ebt_entries *chaininfo;
-+ char *base;
-+ struct ebt_table_info *private = table->private;
-+
-+ read_lock_bh(&table->lock);
-+ cb_base = COUNTER_BASE(private->counters, private->nentries,
-+ cpu_number_map(smp_processor_id()));
-+ if (private->chainstack)
-+ cs = private->chainstack[cpu_number_map(smp_processor_id())];
-+ else
-+ cs = NULL;
-+ chaininfo = private->hook_entry[hook];
-+ nentries = private->hook_entry[hook]->nentries;
-+ point = (struct ebt_entry *)(private->hook_entry[hook]->data);
-+ counter_base = cb_base + private->hook_entry[hook]->counter_offset;
-+ // base for chain jumps
-+ base = private->entries;
-+ i = 0;
-+ while (i < nentries) {
-+ if (ebt_basic_match(point, (**pskb).mac.ethernet, in, out))
-+ goto letscontinue;
-+
-+ if (EBT_MATCH_ITERATE(point, ebt_do_match, *pskb, in, out) != 0)
-+ goto letscontinue;
-+
-+ // increase counter
-+ (*(counter_base + i)).pcnt++;
-+ (*(counter_base + i)).bcnt+=(**pskb).len;
-+
-+ // these should only watch: not modify, nor tell us
-+ // what to do with the packet
-+ EBT_WATCHER_ITERATE(point, ebt_do_watcher, *pskb, in,
-+ out);
-+
-+ t = (struct ebt_entry_target *)
-+ (((char *)point) + point->target_offset);
-+ // standard target
-+ if (!t->u.target->target)
-+ verdict = ((struct ebt_standard_target *)t)->verdict;
-+ else
-+ verdict = t->u.target->target(pskb, hook,
-+ in, out, t->data, t->target_size);
-+ if (verdict == EBT_ACCEPT) {
-+ read_unlock_bh(&table->lock);
-+ return NF_ACCEPT;
-+ }
-+ if (verdict == EBT_DROP) {
-+ read_unlock_bh(&table->lock);
-+ return NF_DROP;
-+ }
-+ if (verdict == EBT_RETURN) {
-+letsreturn:
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ if (sp == 0) {
-+ BUGPRINT("RETURN on base chain");
-+ // act like this is EBT_CONTINUE
-+ goto letscontinue;
-+ }
-+#endif
-+ sp--;
-+ // put all the local variables right
-+ i = cs[sp].n;
-+ chaininfo = cs[sp].chaininfo;
-+ nentries = chaininfo->nentries;
-+ point = cs[sp].e;
-+ counter_base = cb_base +
-+ chaininfo->counter_offset;
-+ continue;
-+ }
-+ if (verdict == EBT_CONTINUE)
-+ goto letscontinue;
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ if (verdict < 0) {
-+ BUGPRINT("bogus standard verdict\n");
-+ read_unlock_bh(&table->lock);
-+ return NF_DROP;
-+ }
-+#endif
-+ // jump to a udc
-+ cs[sp].n = i + 1;
-+ cs[sp].chaininfo = chaininfo;
-+ cs[sp].e = (struct ebt_entry *)
-+ (((char *)point) + point->next_offset);
-+ i = 0;
-+ chaininfo = (struct ebt_entries *) (base + verdict);
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ if (chaininfo->distinguisher) {
-+ BUGPRINT("jump to non-chain\n");
-+ read_unlock_bh(&table->lock);
-+ return NF_DROP;
-+ }
-+#endif
-+ nentries = chaininfo->nentries;
-+ point = (struct ebt_entry *)chaininfo->data;
-+ counter_base = cb_base + chaininfo->counter_offset;
-+ sp++;
-+ continue;
-+letscontinue:
-+ point = (struct ebt_entry *)
-+ (((char *)point) + point->next_offset);
-+ i++;
-+ }
-+
-+ // I actually like this :)
-+ if (chaininfo->policy == EBT_RETURN)
-+ goto letsreturn;
-+ if (chaininfo->policy == EBT_ACCEPT) {
-+ read_unlock_bh(&table->lock);
-+ return NF_ACCEPT;
-+ }
-+ read_unlock_bh(&table->lock);
-+ return NF_DROP;
-+}
-+
-+// If it succeeds, returns element and locks mutex
-+static inline void *
-+find_inlist_lock_noload(struct list_head *head, const char *name, int *error,
-+ struct semaphore *mutex)
-+{
-+ void *ret;
-+
-+ *error = down_interruptible(mutex);
-+ if (*error != 0)
-+ return NULL;
-+
-+ ret = list_named_find(head, name);
-+ if (!ret) {
-+ *error = -ENOENT;
-+ up(mutex);
-+ }
-+ return ret;
-+}
-+
-+#ifndef CONFIG_KMOD
-+#define find_inlist_lock(h,n,p,e,m) find_inlist_lock_noload((h),(n),(e),(m))
-+#else
-+static void *
-+find_inlist_lock(struct list_head *head, const char *name, const char *prefix,
-+ int *error, struct semaphore *mutex)
-+{
-+ void *ret;
-+
-+ ret = find_inlist_lock_noload(head, name, error, mutex);
-+ if (!ret) {
-+ char modulename[EBT_FUNCTION_MAXNAMELEN + strlen(prefix) + 1];
-+ strcpy(modulename, prefix);
-+ strcat(modulename, name);
-+ request_module(modulename);
-+ ret = find_inlist_lock_noload(head, name, error, mutex);
-+ }
-+ return ret;
-+}
-+#endif
-+
-+static inline struct ebt_table *
-+find_table_lock(const char *name, int *error, struct semaphore *mutex)
-+{
-+ return find_inlist_lock(&ebt_tables, name, "ebtable_", error, mutex);
-+}
-+
-+static inline struct ebt_match *
-+find_match_lock(const char *name, int *error, struct semaphore *mutex)
-+{
-+ return find_inlist_lock(&ebt_matches, name, "ebt_", error, mutex);
-+}
-+
-+static inline struct ebt_watcher *
-+find_watcher_lock(const char *name, int *error, struct semaphore *mutex)
-+{
-+ return find_inlist_lock(&ebt_watchers, name, "ebt_", error, mutex);
-+}
-+
-+static inline struct ebt_target *
-+find_target_lock(const char *name, int *error, struct semaphore *mutex)
-+{
-+ return find_inlist_lock(&ebt_targets, name, "ebt_", error, mutex);
-+}
-+
-+static inline int
-+ebt_check_match(struct ebt_entry_match *m, struct ebt_entry *e,
-+ const char *name, unsigned int hookmask, unsigned int *cnt)
-+{
-+ struct ebt_match *match;
-+ int ret;
-+
-+ if (((char *)m) + m->match_size + sizeof(struct ebt_entry_match) >
-+ ((char *)e) + e->watchers_offset)
-+ return -EINVAL;
-+ match = find_match_lock(m->u.name, &ret, &ebt_mutex);
-+ if (!match)
-+ return ret;
-+ m->u.match = match;
-+ if (match->me)
-+ __MOD_INC_USE_COUNT(match->me);
-+ up(&ebt_mutex);
-+ if (match->check &&
-+ match->check(name, hookmask, e, m->data, m->match_size) != 0) {
-+ BUGPRINT("match->check failed\n");
-+ if (match->me)
-+ __MOD_DEC_USE_COUNT(match->me);
-+ return -EINVAL;
-+ }
-+ (*cnt)++;
-+ return 0;
-+}
-+
-+static inline int
-+ebt_check_watcher(struct ebt_entry_watcher *w, struct ebt_entry *e,
-+ const char *name, unsigned int hookmask, unsigned int *cnt)
-+{
-+ struct ebt_watcher *watcher;
-+ int ret;
-+
-+ if (((char *)w) + w->watcher_size + sizeof(struct ebt_entry_watcher) >
-+ ((char *)e) + e->target_offset)
-+ return -EINVAL;
-+ watcher = find_watcher_lock(w->u.name, &ret, &ebt_mutex);
-+ if (!watcher)
-+ return ret;
-+ w->u.watcher = watcher;
-+ if (watcher->me)
-+ __MOD_INC_USE_COUNT(watcher->me);
-+ up(&ebt_mutex);
-+ if (watcher->check &&
-+ watcher->check(name, hookmask, e, w->data, w->watcher_size) != 0) {
-+ BUGPRINT("watcher->check failed\n");
-+ if (watcher->me)
-+ __MOD_DEC_USE_COUNT(watcher->me);
-+ return -EINVAL;
-+ }
-+ (*cnt)++;
-+ return 0;
-+}
-+
-+// this one is very careful, as it is the first function
-+// to parse the userspace data
-+static inline int
-+ebt_check_entry_size_and_hooks(struct ebt_entry *e,
-+ struct ebt_table_info *newinfo, char *base, char *limit,
-+ struct ebt_entries **hook_entries, unsigned int *n, unsigned int *cnt,
-+ unsigned int *totalcnt, unsigned int *udc_cnt, unsigned int valid_hooks)
-+{
-+ int i;
-+
-+ for (i = 0; i < NF_BR_NUMHOOKS; i++) {
-+ if ((valid_hooks & (1 << i)) == 0)
-+ continue;
-+ if ( (char *)hook_entries[i] - base ==
-+ (char *)e - newinfo->entries)
-+ break;
-+ }
-+ // beginning of a new chain
-+ // if i == NF_BR_NUMHOOKS it must be a user defined chain
-+ if (i != NF_BR_NUMHOOKS || !(e->bitmask & EBT_ENTRY_OR_ENTRIES)) {
-+ if ((e->bitmask & EBT_ENTRY_OR_ENTRIES) != 0) {
-+ // we make userspace set this right,
-+ // so there is no misunderstanding
-+ BUGPRINT("EBT_ENTRY_OR_ENTRIES shouldn't be set "
-+ "in distinguisher\n");
-+ return -EINVAL;
-+ }
-+ // this checks if the previous chain has as many entries
-+ // as it said it has
-+ if (*n != *cnt) {
-+ BUGPRINT("nentries does not equal the nr of entries "
-+ "in the chain\n");
-+ return -EINVAL;
-+ }
-+ // before we look at the struct, be sure it is not too big
-+ if ((char *)hook_entries[i] + sizeof(struct ebt_entries)
-+ > limit) {
-+ BUGPRINT("entries_size too small\n");
-+ return -EINVAL;
-+ }
-+ if (((struct ebt_entries *)e)->policy != EBT_DROP &&
-+ ((struct ebt_entries *)e)->policy != EBT_ACCEPT) {
-+ // only RETURN from udc
-+ if (i != NF_BR_NUMHOOKS ||
-+ ((struct ebt_entries *)e)->policy != EBT_RETURN) {
-+ BUGPRINT("bad policy\n");
-+ return -EINVAL;
-+ }
-+ }
-+ if (i == NF_BR_NUMHOOKS) // it's a user defined chain
-+ (*udc_cnt)++;
-+ else
-+ newinfo->hook_entry[i] = (struct ebt_entries *)e;
-+ if (((struct ebt_entries *)e)->counter_offset != *totalcnt) {
-+ BUGPRINT("counter_offset != totalcnt");
-+ return -EINVAL;
-+ }
-+ *n = ((struct ebt_entries *)e)->nentries;
-+ *cnt = 0;
-+ return 0;
-+ }
-+ // a plain old entry, heh
-+ if (sizeof(struct ebt_entry) > e->watchers_offset ||
-+ e->watchers_offset > e->target_offset ||
-+ e->target_offset >= e->next_offset) {
-+ BUGPRINT("entry offsets not in right order\n");
-+ return -EINVAL;
-+ }
-+ // this is not checked anywhere else
-+ if (e->next_offset - e->target_offset < sizeof(struct ebt_entry_target)) {
-+ BUGPRINT("target size too small\n");
-+ return -EINVAL;
-+ }
-+
-+ (*cnt)++;
-+ (*totalcnt)++;
-+ return 0;
-+}
-+
-+struct ebt_cl_stack
-+{
-+ struct ebt_chainstack cs;
-+ int from;
-+ unsigned int hookmask;
-+};
-+
-+// we need these positions to check that the jumps to a different part of the
-+// entries is a jump to the beginning of a new chain.
-+static inline int
-+ebt_get_udc_positions(struct ebt_entry *e, struct ebt_table_info *newinfo,
-+ struct ebt_entries **hook_entries, unsigned int *n, unsigned int valid_hooks,
-+ struct ebt_cl_stack *udc)
-+{
-+ int i;
-+
-+ // we're only interested in chain starts
-+ if (e->bitmask & EBT_ENTRY_OR_ENTRIES)
-+ return 0;
-+ for (i = 0; i < NF_BR_NUMHOOKS; i++) {
-+ if ((valid_hooks & (1 << i)) == 0)
-+ continue;
-+ if (newinfo->hook_entry[i] == (struct ebt_entries *)e)
-+ break;
-+ }
-+ // only care about udc
-+ if (i != NF_BR_NUMHOOKS)
-+ return 0;
-+
-+ udc[*n].cs.chaininfo = (struct ebt_entries *)e;
-+ // these initialisations are depended on later in check_chainloops()
-+ udc[*n].cs.n = 0;
-+ udc[*n].hookmask = 0;
-+
-+ (*n)++;
-+ return 0;
-+}
-+
-+static inline int
-+ebt_cleanup_match(struct ebt_entry_match *m, unsigned int *i)
-+{
-+ if (i && (*i)-- == 0)
-+ return 1;
-+ if (m->u.match->destroy)
-+ m->u.match->destroy(m->data, m->match_size);
-+ if (m->u.match->me)
-+ __MOD_DEC_USE_COUNT(m->u.match->me);
-+
-+ return 0;
-+}
-+
-+static inline int
-+ebt_cleanup_watcher(struct ebt_entry_watcher *w, unsigned int *i)
-+{
-+ if (i && (*i)-- == 0)
-+ return 1;
-+ if (w->u.watcher->destroy)
-+ w->u.watcher->destroy(w->data, w->watcher_size);
-+ if (w->u.watcher->me)
-+ __MOD_DEC_USE_COUNT(w->u.watcher->me);
-+
-+ return 0;
-+}
-+
-+static inline int
-+ebt_cleanup_entry(struct ebt_entry *e, unsigned int *cnt)
-+{
-+ struct ebt_entry_target *t;
-+
-+ if ((e->bitmask & EBT_ENTRY_OR_ENTRIES) == 0)
-+ return 0;
-+ // we're done
-+ if (cnt && (*cnt)-- == 0)
-+ return 1;
-+ EBT_WATCHER_ITERATE(e, ebt_cleanup_watcher, NULL);
-+ EBT_MATCH_ITERATE(e, ebt_cleanup_match, NULL);
-+ t = (struct ebt_entry_target *)(((char *)e) + e->target_offset);
-+ if (t->u.target->destroy)
-+ t->u.target->destroy(t->data, t->target_size);
-+ if (t->u.target->me)
-+ __MOD_DEC_USE_COUNT(t->u.target->me);
-+
-+ return 0;
-+}
-+
-+static inline int
-+ebt_check_entry(struct ebt_entry *e, struct ebt_table_info *newinfo,
-+ const char *name, unsigned int *cnt, unsigned int valid_hooks,
-+ struct ebt_cl_stack *cl_s, unsigned int udc_cnt)
-+{
-+ struct ebt_entry_target *t;
-+ struct ebt_target *target;
-+ unsigned int i, j, hook = 0, hookmask = 0;
-+ int ret;
-+
-+ // Don't mess with the struct ebt_entries
-+ if ((e->bitmask & EBT_ENTRY_OR_ENTRIES) == 0)
-+ return 0;
-+
-+ if (e->bitmask & ~EBT_F_MASK) {
-+ BUGPRINT("Unknown flag for bitmask\n");
-+ return -EINVAL;
-+ }
-+ if (e->invflags & ~EBT_INV_MASK) {
-+ BUGPRINT("Unknown flag for inv bitmask\n");
-+ return -EINVAL;
-+ }
-+ if ( (e->bitmask & EBT_NOPROTO) && (e->bitmask & EBT_802_3) ) {
-+ BUGPRINT("NOPROTO & 802_3 not allowed\n");
-+ return -EINVAL;
-+ }
-+ // what hook do we belong to?
-+ for (i = 0; i < NF_BR_NUMHOOKS; i++) {
-+ if ((valid_hooks & (1 << i)) == 0)
-+ continue;
-+ if ((char *)newinfo->hook_entry[i] < (char *)e)
-+ hook = i;
-+ else
-+ break;
-+ }
-+ // (1 << NF_BR_NUMHOOKS) tells the check functions the rule is on
-+ // a base chain
-+ if (i < NF_BR_NUMHOOKS)
-+ hookmask = (1 << hook) | (1 << NF_BR_NUMHOOKS);
-+ else {
-+ for (i = 0; i < udc_cnt; i++)
-+ if ((char *)(cl_s[i].cs.chaininfo) > (char *)e)
-+ break;
-+ if (i == 0)
-+ hookmask = (1 << hook) | (1 << NF_BR_NUMHOOKS);
-+ else
-+ hookmask = cl_s[i - 1].hookmask;
-+ }
-+ i = 0;
-+ ret = EBT_MATCH_ITERATE(e, ebt_check_match, e, name, hookmask, &i);
-+ if (ret != 0)
-+ goto cleanup_matches;
-+ j = 0;
-+ ret = EBT_WATCHER_ITERATE(e, ebt_check_watcher, e, name, hookmask, &j);
-+ if (ret != 0)
-+ goto cleanup_watchers;
-+ t = (struct ebt_entry_target *)(((char *)e) + e->target_offset);
-+ target = find_target_lock(t->u.name, &ret, &ebt_mutex);
-+ if (!target)
-+ goto cleanup_watchers;
-+ if (target->me)
-+ __MOD_INC_USE_COUNT(target->me);
-+ up(&ebt_mutex);
-+
-+ t->u.target = target;
-+ if (t->u.target == &ebt_standard_target) {
-+ if (e->target_offset + sizeof(struct ebt_standard_target) >
-+ e->next_offset) {
-+ BUGPRINT("Standard target size too big\n");
-+ ret = -EFAULT;
-+ goto cleanup_watchers;
-+ }
-+ if (((struct ebt_standard_target *)t)->verdict <
-+ -NUM_STANDARD_TARGETS) {
-+ BUGPRINT("Invalid standard target\n");
-+ ret = -EFAULT;
-+ goto cleanup_watchers;
-+ }
-+ } else if ((e->target_offset + t->target_size +
-+ sizeof(struct ebt_entry_target) > e->next_offset) ||
-+ (t->u.target->check &&
-+ t->u.target->check(name, hookmask, e, t->data, t->target_size) != 0)){
-+ if (t->u.target->me)
-+ __MOD_DEC_USE_COUNT(t->u.target->me);
-+ ret = -EFAULT;
-+ goto cleanup_watchers;
-+ }
-+ (*cnt)++;
-+ return 0;
-+cleanup_watchers:
-+ EBT_WATCHER_ITERATE(e, ebt_cleanup_watcher, &j);
-+cleanup_matches:
-+ EBT_MATCH_ITERATE(e, ebt_cleanup_match, &i);
-+ return ret;
-+}
-+
-+// checks for loops and sets the hook mask for udc
-+// the hook mask for udc tells us from which base chains the udc can be
-+// accessed. This mask is a parameter to the check() functions of the extensions
-+static int check_chainloops(struct ebt_entries *chain,
-+ struct ebt_cl_stack *cl_s, unsigned int udc_cnt,
-+ unsigned int hooknr, char *base)
-+{
-+ int i, chain_nr = -1, pos = 0, nentries = chain->nentries, verdict;
-+ struct ebt_entry *e = (struct ebt_entry *)chain->data;
-+ struct ebt_entry_target *t;
-+
-+ while (pos < nentries || chain_nr != -1) {
-+ // end of udc, go back one 'recursion' step
-+ if (pos == nentries) {
-+ // put back values of the time when this chain was called
-+ e = cl_s[chain_nr].cs.e;
-+ if (cl_s[chain_nr].from != -1)
-+ nentries =
-+ cl_s[cl_s[chain_nr].from].cs.chaininfo->nentries;
-+ else
-+ nentries = chain->nentries;
-+ pos = cl_s[chain_nr].cs.n;
-+ // make sure we won't see a loop that isn't one
-+ cl_s[chain_nr].cs.n = 0;
-+ chain_nr = cl_s[chain_nr].from;
-+ if (pos == nentries)
-+ continue;
-+ }
-+ t = (struct ebt_entry_target *)
-+ (((char *)e) + e->target_offset);
-+ if (strcmp(t->u.name, EBT_STANDARD_TARGET))
-+ goto letscontinue;
-+ if (e->target_offset + sizeof(struct ebt_standard_target) >
-+ e->next_offset) {
-+ BUGPRINT("Standard target size too big\n");
-+ return -1;
-+ }
-+ verdict = ((struct ebt_standard_target *)t)->verdict;
-+ if (verdict >= 0) { // jump to another chain
-+ struct ebt_entries *hlp2 =
-+ (struct ebt_entries *)(base + verdict);
-+ for (i = 0; i < udc_cnt; i++)
-+ if (hlp2 == cl_s[i].cs.chaininfo)
-+ break;
-+ // bad destination or loop
-+ if (i == udc_cnt) {
-+ BUGPRINT("bad destination\n");
-+ return -1;
-+ }
-+ if (cl_s[i].cs.n) {
-+ BUGPRINT("loop\n");
-+ return -1;
-+ }
-+ // this can't be 0, so the above test is correct
-+ cl_s[i].cs.n = pos + 1;
-+ pos = 0;
-+ cl_s[i].cs.e = ((void *)e + e->next_offset);
-+ e = (struct ebt_entry *)(hlp2->data);
-+ nentries = hlp2->nentries;
-+ cl_s[i].from = chain_nr;
-+ chain_nr = i;
-+ // this udc is accessible from the base chain for hooknr
-+ cl_s[i].hookmask |= (1 << hooknr);
-+ continue;
-+ }
-+letscontinue:
-+ e = (void *)e + e->next_offset;
-+ pos++;
-+ }
-+ return 0;
-+}
-+
-+// do the parsing of the table/chains/entries/matches/watchers/targets, heh
-+static int translate_table(struct ebt_replace *repl,
-+ struct ebt_table_info *newinfo)
-+{
-+ unsigned int i, j, k, udc_cnt;
-+ int ret;
-+ struct ebt_cl_stack *cl_s = NULL; // used in the checking for chain loops
-+
-+ i = 0;
-+ while (i < NF_BR_NUMHOOKS && !(repl->valid_hooks & (1 << i)))
-+ i++;
-+ if (i == NF_BR_NUMHOOKS) {
-+ BUGPRINT("No valid hooks specified\n");
-+ return -EINVAL;
-+ }
-+ if (repl->hook_entry[i] != (struct ebt_entries *)repl->entries) {
-+ BUGPRINT("Chains don't start at beginning\n");
-+ return -EINVAL;
-+ }
-+ // make sure chains are ordered after each other in same order
-+ // as their corresponding hooks
-+ for (j = i + 1; j < NF_BR_NUMHOOKS; j++) {
-+ if (!(repl->valid_hooks & (1 << j)))
-+ continue;
-+ if ( repl->hook_entry[j] <= repl->hook_entry[i] ) {
-+ BUGPRINT("Hook order must be followed\n");
-+ return -EINVAL;
-+ }
-+ i = j;
-+ }
-+
-+ for (i = 0; i < NF_BR_NUMHOOKS; i++)
-+ newinfo->hook_entry[i] = NULL;
-+
-+ newinfo->entries_size = repl->entries_size;
-+ newinfo->nentries = repl->nentries;
-+
-+ // do some early checkings and initialize some things
-+ i = 0; // holds the expected nr. of entries for the chain
-+ j = 0; // holds the up to now counted entries for the chain
-+ k = 0; // holds the total nr. of entries, should equal
-+ // newinfo->nentries afterwards
-+ udc_cnt = 0; // will hold the nr. of user defined chains (udc)
-+ ret = EBT_ENTRY_ITERATE(newinfo->entries, newinfo->entries_size,
-+ ebt_check_entry_size_and_hooks, newinfo, repl->entries,
-+ repl->entries + repl->entries_size, repl->hook_entry, &i, &j, &k,
-+ &udc_cnt, repl->valid_hooks);
-+
-+ if (ret != 0)
-+ return ret;
-+
-+ if (i != j) {
-+ BUGPRINT("nentries does not equal the nr of entries in the "
-+ "(last) chain\n");
-+ return -EINVAL;
-+ }
-+ if (k != newinfo->nentries) {
-+ BUGPRINT("Total nentries is wrong\n");
-+ return -EINVAL;
-+ }
-+
-+ // check if all valid hooks have a chain
-+ for (i = 0; i < NF_BR_NUMHOOKS; i++) {
-+ if (newinfo->hook_entry[i] == NULL &&
-+ (repl->valid_hooks & (1 << i))) {
-+ BUGPRINT("Valid hook without chain\n");
-+ return -EINVAL;
-+ }
-+ }
-+
-+ // Get the location of the udc, put them in an array
-+ // While we're at it, allocate the chainstack
-+ if (udc_cnt) {
-+ // this will get free'd in do_replace()/ebt_register_table()
-+ // if an error occurs
-+ newinfo->chainstack = (struct ebt_chainstack **)
-+ vmalloc(smp_num_cpus * sizeof(struct ebt_chainstack));
-+ if (!newinfo->chainstack)
-+ return -ENOMEM;
-+ for (i = 0; i < smp_num_cpus; i++) {
-+ newinfo->chainstack[i] =
-+ vmalloc(udc_cnt * sizeof(struct ebt_chainstack));
-+ if (!newinfo->chainstack[i]) {
-+ while (i)
-+ vfree(newinfo->chainstack[--i]);
-+ vfree(newinfo->chainstack);
-+ newinfo->chainstack = NULL;
-+ return -ENOMEM;
-+ }
-+ }
-+
-+ cl_s = (struct ebt_cl_stack *)
-+ vmalloc(udc_cnt * sizeof(struct ebt_cl_stack));
-+ if (!cl_s)
-+ return -ENOMEM;
-+ i = 0; // the i'th udc
-+ EBT_ENTRY_ITERATE(newinfo->entries, newinfo->entries_size,
-+ ebt_get_udc_positions, newinfo, repl->hook_entry, &i,
-+ repl->valid_hooks, cl_s);
-+ // sanity check
-+ if (i != udc_cnt) {
-+ BUGPRINT("i != udc_cnt\n");
-+ vfree(cl_s);
-+ return -EFAULT;
-+ }
-+ }
-+
-+ // Check for loops
-+ for (i = 0; i < NF_BR_NUMHOOKS; i++)
-+ if (repl->valid_hooks & (1 << i))
-+ if (check_chainloops(newinfo->hook_entry[i],
-+ cl_s, udc_cnt, i, newinfo->entries)) {
-+ if (cl_s)
-+ vfree(cl_s);
-+ return -EINVAL;
-+ }
-+
-+ // we now know the following (along with E=mc²):
-+ // - the nr of entries in each chain is right
-+ // - the size of the allocated space is right
-+ // - all valid hooks have a corresponding chain
-+ // - there are no loops
-+ // - wrong data can still be on the level of a single entry
-+ // - could be there are jumps to places that are not the
-+ // beginning of a chain. This can only occur in chains that
-+ // are not accessible from any base chains, so we don't care.
-+
-+ // used to know what we need to clean up if something goes wrong
-+ i = 0;
-+ ret = EBT_ENTRY_ITERATE(newinfo->entries, newinfo->entries_size,
-+ ebt_check_entry, newinfo, repl->name, &i, repl->valid_hooks,
-+ cl_s, udc_cnt);
-+ if (ret != 0) {
-+ EBT_ENTRY_ITERATE(newinfo->entries, newinfo->entries_size,
-+ ebt_cleanup_entry, &i);
-+ }
-+ if (cl_s)
-+ vfree(cl_s);
-+ return ret;
-+}
-+
-+// called under write_lock
-+static void get_counters(struct ebt_counter *oldcounters,
-+ struct ebt_counter *counters, unsigned int nentries)
-+{
-+ int i, cpu;
-+ struct ebt_counter *counter_base;
-+
-+ // counters of cpu 0
-+ memcpy(counters, oldcounters,
-+ sizeof(struct ebt_counter) * nentries);
-+ // add other counters to those of cpu 0
-+ for (cpu = 1; cpu < smp_num_cpus; cpu++) {
-+ counter_base = COUNTER_BASE(oldcounters, nentries, cpu);
-+ for (i = 0; i < nentries; i++) {
-+ counters[i].pcnt += counter_base[i].pcnt;
-+ counters[i].bcnt += counter_base[i].bcnt;
-+ }
-+ }
-+}
-+
-+// replace the table
-+static int do_replace(void *user, unsigned int len)
-+{
-+ int ret, i, countersize;
-+ struct ebt_table_info *newinfo;
-+ struct ebt_replace tmp;
-+ struct ebt_table *t;
-+ struct ebt_counter *counterstmp = NULL;
-+ // used to be able to unlock earlier
-+ struct ebt_table_info *table;
-+
-+ if (copy_from_user(&tmp, user, sizeof(tmp)) != 0)
-+ return -EFAULT;
-+
-+ if (len != sizeof(tmp) + tmp.entries_size) {
-+ BUGPRINT("Wrong len argument\n");
-+ return -EINVAL;
-+ }
-+
-+ if (tmp.entries_size == 0) {
-+ BUGPRINT("Entries_size never zero\n");
-+ return -EINVAL;
-+ }
-+ countersize = COUNTER_OFFSET(tmp.nentries) * smp_num_cpus;
-+ newinfo = (struct ebt_table_info *)
-+ vmalloc(sizeof(struct ebt_table_info) + countersize);
-+ if (!newinfo)
-+ return -ENOMEM;
-+
-+ if (countersize)
-+ memset(newinfo->counters, 0, countersize);
-+
-+ newinfo->entries = (char *)vmalloc(tmp.entries_size);
-+ if (!newinfo->entries) {
-+ ret = -ENOMEM;
-+ goto free_newinfo;
-+ }
-+ if (copy_from_user(
-+ newinfo->entries, tmp.entries, tmp.entries_size) != 0) {
-+ BUGPRINT("Couldn't copy entries from userspace\n");
-+ ret = -EFAULT;
-+ goto free_entries;
-+ }
-+
-+ // the user wants counters back
-+ // the check on the size is done later, when we have the lock
-+ if (tmp.num_counters) {
-+ counterstmp = (struct ebt_counter *)
-+ vmalloc(tmp.num_counters * sizeof(struct ebt_counter));
-+ if (!counterstmp) {
-+ ret = -ENOMEM;
-+ goto free_entries;
-+ }
-+ }
-+ else
-+ counterstmp = NULL;
-+
-+ // this can get initialized by translate_table()
-+ newinfo->chainstack = NULL;
-+ ret = translate_table(&tmp, newinfo);
-+
-+ if (ret != 0)
-+ goto free_counterstmp;
-+
-+ t = find_table_lock(tmp.name, &ret, &ebt_mutex);
-+ if (!t)
-+ goto free_iterate;
-+
-+ // the table doesn't like it
-+ if (t->check && (ret = t->check(newinfo, tmp.valid_hooks)))
-+ goto free_unlock;
-+
-+ if (tmp.num_counters && tmp.num_counters != t->private->nentries) {
-+ BUGPRINT("Wrong nr. of counters requested\n");
-+ ret = -EINVAL;
-+ goto free_unlock;
-+ }
-+
-+ // we have the mutex lock, so no danger in reading this pointer
-+ table = t->private;
-+ // we need an atomic snapshot of the counters
-+ write_lock_bh(&t->lock);
-+ if (tmp.num_counters)
-+ get_counters(t->private->counters, counterstmp,
-+ t->private->nentries);
-+
-+ t->private = newinfo;
-+ write_unlock_bh(&t->lock);
-+ up(&ebt_mutex);
-+ // So, a user can change the chains while having messed up her counter
-+ // allocation. Only reason why this is done is because this way the lock
-+ // is held only once, while this doesn't bring the kernel into a
-+ // dangerous state.
-+ if (tmp.num_counters &&
-+ copy_to_user(tmp.counters, counterstmp,
-+ tmp.num_counters * sizeof(struct ebt_counter))) {
-+ BUGPRINT("Couldn't copy counters to userspace\n");
-+ ret = -EFAULT;
-+ }
-+ else
-+ ret = 0;
-+
-+ // decrease module count and free resources
-+ EBT_ENTRY_ITERATE(table->entries, table->entries_size,
-+ ebt_cleanup_entry, NULL);
-+
-+ vfree(table->entries);
-+ if (table->chainstack) {
-+ for (i = 0; i < smp_num_cpus; i++)
-+ vfree(table->chainstack[i]);
-+ vfree(table->chainstack);
-+ }
-+ vfree(table);
-+
-+ if (counterstmp)
-+ vfree(counterstmp);
-+ return ret;
-+
-+free_unlock:
-+ up(&ebt_mutex);
-+free_iterate:
-+ EBT_ENTRY_ITERATE(newinfo->entries, newinfo->entries_size,
-+ ebt_cleanup_entry, NULL);
-+free_counterstmp:
-+ if (counterstmp)
-+ vfree(counterstmp);
-+ // can be initialized in translate_table()
-+ if (newinfo->chainstack) {
-+ for (i = 0; i < smp_num_cpus; i++)
-+ vfree(newinfo->chainstack[i]);
-+ vfree(newinfo->chainstack);
-+ }
-+free_entries:
-+ if (newinfo->entries)
-+ vfree(newinfo->entries);
-+free_newinfo:
-+ if (newinfo)
-+ vfree(newinfo);
-+ return ret;
-+}
-+
-+int ebt_register_target(struct ebt_target *target)
-+{
-+ int ret;
-+
-+ ret = down_interruptible(&ebt_mutex);
-+ if (ret != 0)
-+ return ret;
-+ if (!list_named_insert(&ebt_targets, target)) {
-+ up(&ebt_mutex);
-+ return -EEXIST;
-+ }
-+ up(&ebt_mutex);
-+ MOD_INC_USE_COUNT;
-+
-+ return 0;
-+}
-+
-+void ebt_unregister_target(struct ebt_target *target)
-+{
-+ down(&ebt_mutex);
-+ LIST_DELETE(&ebt_targets, target);
-+ up(&ebt_mutex);
-+ MOD_DEC_USE_COUNT;
-+}
-+
-+int ebt_register_match(struct ebt_match *match)
-+{
-+ int ret;
-+
-+ ret = down_interruptible(&ebt_mutex);
-+ if (ret != 0)
-+ return ret;
-+ if (!list_named_insert(&ebt_matches, match)) {
-+ up(&ebt_mutex);
-+ return -EEXIST;
-+ }
-+ up(&ebt_mutex);
-+ MOD_INC_USE_COUNT;
-+
-+ return 0;
-+}
-+
-+void ebt_unregister_match(struct ebt_match *match)
-+{
-+ down(&ebt_mutex);
-+ LIST_DELETE(&ebt_matches, match);
-+ up(&ebt_mutex);
-+ MOD_DEC_USE_COUNT;
-+}
-+
-+int ebt_register_watcher(struct ebt_watcher *watcher)
-+{
-+ int ret;
-+
-+ ret = down_interruptible(&ebt_mutex);
-+ if (ret != 0)
-+ return ret;
-+ if (!list_named_insert(&ebt_watchers, watcher)) {
-+ up(&ebt_mutex);
-+ return -EEXIST;
-+ }
-+ up(&ebt_mutex);
-+ MOD_INC_USE_COUNT;
-+
-+ return 0;
-+}
-+
-+void ebt_unregister_watcher(struct ebt_watcher *watcher)
-+{
-+ down(&ebt_mutex);
-+ LIST_DELETE(&ebt_watchers, watcher);
-+ up(&ebt_mutex);
-+ MOD_DEC_USE_COUNT;
-+}
-+
-+int ebt_register_table(struct ebt_table *table)
-+{
-+ struct ebt_table_info *newinfo;
-+ int ret, i, countersize;
-+
-+ if (!table || !table->table ||!table->table->entries ||
-+ table->table->entries_size == 0 ||
-+ table->table->counters || table->private) {
-+ BUGPRINT("Bad table data for ebt_register_table!!!\n");
-+ return -EINVAL;
-+ }
-+
-+ countersize = COUNTER_OFFSET(table->table->nentries) * smp_num_cpus;
-+ newinfo = (struct ebt_table_info *)
-+ vmalloc(sizeof(struct ebt_table_info) + countersize);
-+ ret = -ENOMEM;
-+ if (!newinfo)
-+ return -ENOMEM;
-+
-+ newinfo->entries = (char *)vmalloc(table->table->entries_size);
-+ if (!(newinfo->entries))
-+ goto free_newinfo;
-+
-+ memcpy(newinfo->entries, table->table->entries,
-+ table->table->entries_size);
-+
-+ if (countersize)
-+ memset(newinfo->counters, 0, countersize);
-+
-+ // fill in newinfo and parse the entries
-+ newinfo->chainstack = NULL;
-+ ret = translate_table(table->table, newinfo);
-+ if (ret != 0) {
-+ BUGPRINT("Translate_table failed\n");
-+ goto free_chainstack;
-+ }
-+
-+ if (table->check && table->check(newinfo, table->valid_hooks)) {
-+ BUGPRINT("The table doesn't like its own initial data, lol\n");
-+ return -EINVAL;
-+ }
-+
-+ table->private = newinfo;
-+ table->lock = RW_LOCK_UNLOCKED;
-+ ret = down_interruptible(&ebt_mutex);
-+ if (ret != 0)
-+ goto free_chainstack;
-+
-+ if (list_named_find(&ebt_tables, table->name)) {
-+ ret = -EEXIST;
-+ BUGPRINT("Table name already exists\n");
-+ goto free_unlock;
-+ }
-+
-+ list_prepend(&ebt_tables, table);
-+ up(&ebt_mutex);
-+ MOD_INC_USE_COUNT;
-+ return 0;
-+free_unlock:
-+ up(&ebt_mutex);
-+free_chainstack:
-+ if (newinfo->chainstack) {
-+ for (i = 0; i < smp_num_cpus; i++)
-+ vfree(newinfo->chainstack[i]);
-+ vfree(newinfo->chainstack);
-+ }
-+ vfree(newinfo->entries);
-+free_newinfo:
-+ vfree(newinfo);
-+ return ret;
-+}
-+
-+void ebt_unregister_table(struct ebt_table *table)
-+{
-+ int i;
-+
-+ if (!table) {
-+ BUGPRINT("Request to unregister NULL table!!!\n");
-+ return;
-+ }
-+ down(&ebt_mutex);
-+ LIST_DELETE(&ebt_tables, table);
-+ up(&ebt_mutex);
-+ EBT_ENTRY_ITERATE(table->private->entries,
-+ table->private->entries_size, ebt_cleanup_entry, NULL);
-+ if (table->private->entries)
-+ vfree(table->private->entries);
-+ if (table->private->chainstack) {
-+ for (i = 0; i < smp_num_cpus; i++)
-+ vfree(table->private->chainstack[i]);
-+ vfree(table->private->chainstack);
-+ }
-+ vfree(table->private);
-+ MOD_DEC_USE_COUNT;
-+}
-+
-+// userspace just supplied us with counters
-+static int update_counters(void *user, unsigned int len)
-+{
-+ int i, ret;
-+ struct ebt_counter *tmp;
-+ struct ebt_replace hlp;
-+ struct ebt_table *t;
-+
-+ if (copy_from_user(&hlp, user, sizeof(hlp)))
-+ return -EFAULT;
-+
-+ if (len != sizeof(hlp) + hlp.num_counters * sizeof(struct ebt_counter))
-+ return -EINVAL;
-+ if (hlp.num_counters == 0)
-+ return -EINVAL;
-+
-+ if ( !(tmp = (struct ebt_counter *)
-+ vmalloc(hlp.num_counters * sizeof(struct ebt_counter))) ){
-+ MEMPRINT("Update_counters && nomemory\n");
-+ return -ENOMEM;
-+ }
-+
-+ t = find_table_lock(hlp.name, &ret, &ebt_mutex);
-+ if (!t)
-+ goto free_tmp;
-+
-+ if (hlp.num_counters != t->private->nentries) {
-+ BUGPRINT("Wrong nr of counters\n");
-+ ret = -EINVAL;
-+ goto unlock_mutex;
-+ }
-+
-+ if ( copy_from_user(tmp, hlp.counters,
-+ hlp.num_counters * sizeof(struct ebt_counter)) ) {
-+ BUGPRINT("Updata_counters && !cfu\n");
-+ ret = -EFAULT;
-+ goto unlock_mutex;
-+ }
-+
-+ // we want an atomic add of the counters
-+ write_lock_bh(&t->lock);
-+
-+ // we add to the counters of the first cpu
-+ for (i = 0; i < hlp.num_counters; i++) {
-+ t->private->counters[i].pcnt += tmp[i].pcnt;
-+ t->private->counters[i].bcnt += tmp[i].bcnt;
-+ }
-+
-+ write_unlock_bh(&t->lock);
-+ ret = 0;
-+unlock_mutex:
-+ up(&ebt_mutex);
-+free_tmp:
-+ vfree(tmp);
-+ return ret;
-+}
-+
-+static inline int ebt_make_matchname(struct ebt_entry_match *m,
-+ char *base, char *ubase)
-+{
-+ char *hlp = ubase - base + (char *)m;
-+ if (copy_to_user(hlp, m->u.match->name, EBT_FUNCTION_MAXNAMELEN))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+static inline int ebt_make_watchername(struct ebt_entry_watcher *w,
-+ char *base, char *ubase)
-+{
-+ char *hlp = ubase - base + (char *)w;
-+ if (copy_to_user(hlp , w->u.watcher->name, EBT_FUNCTION_MAXNAMELEN))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+static inline int ebt_make_names(struct ebt_entry *e, char *base, char *ubase)
-+{
-+ int ret;
-+ char *hlp;
-+ struct ebt_entry_target *t;
-+
-+ if ((e->bitmask & EBT_ENTRY_OR_ENTRIES) == 0)
-+ return 0;
-+
-+ hlp = ubase - base + (char *)e + e->target_offset;
-+ t = (struct ebt_entry_target *)(((char *)e) + e->target_offset);
-+
-+ ret = EBT_MATCH_ITERATE(e, ebt_make_matchname, base, ubase);
-+ if (ret != 0)
-+ return ret;
-+ ret = EBT_WATCHER_ITERATE(e, ebt_make_watchername, base, ubase);
-+ if (ret != 0)
-+ return ret;
-+ if (copy_to_user(hlp, t->u.target->name, EBT_FUNCTION_MAXNAMELEN))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+// called with ebt_mutex down
-+static int copy_everything_to_user(struct ebt_table *t, void *user,
-+ int *len, int cmd)
-+{
-+ struct ebt_replace tmp;
-+ struct ebt_counter *counterstmp, *oldcounters;
-+ unsigned int entries_size, nentries;
-+ char *entries;
-+
-+ if (cmd == EBT_SO_GET_ENTRIES) {
-+ entries_size = t->private->entries_size;
-+ nentries = t->private->nentries;
-+ entries = t->private->entries;
-+ oldcounters = t->private->counters;
-+ } else {
-+ entries_size = t->table->entries_size;
-+ nentries = t->table->nentries;
-+ entries = t->table->entries;
-+ oldcounters = t->table->counters;
-+ }
-+
-+ if (copy_from_user(&tmp, user, sizeof(tmp))) {
-+ BUGPRINT("Cfu didn't work\n");
-+ return -EFAULT;
-+ }
-+
-+ if (*len != sizeof(struct ebt_replace) + entries_size +
-+ (tmp.num_counters? nentries * sizeof(struct ebt_counter): 0)) {
-+ BUGPRINT("Wrong size\n");
-+ return -EINVAL;
-+ }
-+
-+ if (tmp.nentries != nentries) {
-+ BUGPRINT("Nentries wrong\n");
-+ return -EINVAL;
-+ }
-+
-+ if (tmp.entries_size != entries_size) {
-+ BUGPRINT("Wrong size\n");
-+ return -EINVAL;
-+ }
-+
-+ // userspace might not need the counters
-+ if (tmp.num_counters) {
-+ if (tmp.num_counters != nentries) {
-+ BUGPRINT("Num_counters wrong\n");
-+ return -EINVAL;
-+ }
-+ counterstmp = (struct ebt_counter *)
-+ vmalloc(nentries * sizeof(struct ebt_counter));
-+ if (!counterstmp) {
-+ MEMPRINT("Couldn't copy counters, out of memory\n");
-+ return -ENOMEM;
-+ }
-+ write_lock_bh(&t->lock);
-+ get_counters(oldcounters, counterstmp, nentries);
-+ write_unlock_bh(&t->lock);
-+
-+ if (copy_to_user(tmp.counters, counterstmp,
-+ nentries * sizeof(struct ebt_counter))) {
-+ BUGPRINT("Couldn't copy counters to userspace\n");
-+ vfree(counterstmp);
-+ return -EFAULT;
-+ }
-+ vfree(counterstmp);
-+ }
-+
-+ if (copy_to_user(tmp.entries, entries, entries_size)) {
-+ BUGPRINT("Couldn't copy entries to userspace\n");
-+ return -EFAULT;
-+ }
-+ // set the match/watcher/target names right
-+ return EBT_ENTRY_ITERATE(entries, entries_size,
-+ ebt_make_names, entries, tmp.entries);
-+}
-+
-+static int do_ebt_set_ctl(struct sock *sk,
-+ int cmd, void *user, unsigned int len)
-+{
-+ int ret;
-+
-+ switch(cmd) {
-+ case EBT_SO_SET_ENTRIES:
-+ ret = do_replace(user, len);
-+ break;
-+ case EBT_SO_SET_COUNTERS:
-+ ret = update_counters(user, len);
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ }
-+ return ret;
-+}
-+
-+static int do_ebt_get_ctl(struct sock *sk, int cmd, void *user, int *len)
-+{
-+ int ret;
-+ struct ebt_replace tmp;
-+ struct ebt_table *t;
-+
-+ if (copy_from_user(&tmp, user, sizeof(tmp)))
-+ return -EFAULT;
-+
-+ t = find_table_lock(tmp.name, &ret, &ebt_mutex);
-+ if (!t)
-+ return ret;
-+
-+ switch(cmd) {
-+ case EBT_SO_GET_INFO:
-+ case EBT_SO_GET_INIT_INFO:
-+ if (*len != sizeof(struct ebt_replace)){
-+ ret = -EINVAL;
-+ up(&ebt_mutex);
-+ break;
-+ }
-+ if (cmd == EBT_SO_GET_INFO) {
-+ tmp.nentries = t->private->nentries;
-+ tmp.entries_size = t->private->entries_size;
-+ tmp.valid_hooks = t->valid_hooks;
-+ } else {
-+ tmp.nentries = t->table->nentries;
-+ tmp.entries_size = t->table->entries_size;
-+ tmp.valid_hooks = t->table->valid_hooks;
-+ }
-+ up(&ebt_mutex);
-+ if (copy_to_user(user, &tmp, *len) != 0){
-+ BUGPRINT("c2u Didn't work\n");
-+ ret = -EFAULT;
-+ break;
-+ }
-+ ret = 0;
-+ break;
-+
-+ case EBT_SO_GET_ENTRIES:
-+ case EBT_SO_GET_INIT_ENTRIES:
-+ ret = copy_everything_to_user(t, user, len, cmd);
-+ up(&ebt_mutex);
-+ break;
-+
-+ default:
-+ up(&ebt_mutex);
-+ ret = -EINVAL;
-+ }
-+
-+ return ret;
-+}
-+
-+static struct nf_sockopt_ops ebt_sockopts =
-+{ { NULL, NULL }, PF_INET, EBT_BASE_CTL, EBT_SO_SET_MAX + 1, do_ebt_set_ctl,
-+ EBT_BASE_CTL, EBT_SO_GET_MAX + 1, do_ebt_get_ctl, 0, NULL
-+};
-+
-+static int __init init(void)
-+{
-+ int ret;
-+
-+ down(&ebt_mutex);
-+ list_named_insert(&ebt_targets, &ebt_standard_target);
-+ up(&ebt_mutex);
-+ if ((ret = nf_register_sockopt(&ebt_sockopts)) < 0)
-+ return ret;
-+
-+ printk(KERN_NOTICE "Ebtables v2.0 registered\n");
-+ return 0;
-+}
-+
-+static void __exit fini(void)
-+{
-+ nf_unregister_sockopt(&ebt_sockopts);
-+ printk(KERN_NOTICE "Ebtables v2.0 unregistered\n");
-+}
-+
-+EXPORT_SYMBOL(ebt_register_table);
-+EXPORT_SYMBOL(ebt_unregister_table);
-+EXPORT_SYMBOL(ebt_register_match);
-+EXPORT_SYMBOL(ebt_unregister_match);
-+EXPORT_SYMBOL(ebt_register_watcher);
-+EXPORT_SYMBOL(ebt_unregister_watcher);
-+EXPORT_SYMBOL(ebt_register_target);
-+EXPORT_SYMBOL(ebt_unregister_target);
-+EXPORT_SYMBOL(ebt_do_table);
-+module_init(init);
-+module_exit(fini);
-+MODULE_LICENSE("GPL");
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebtables.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,361 @@
-+/*
-+ * ebtables
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * ebtables.c,v 2.0, September, 2002
-+ *
-+ * This code is stongly inspired on the iptables code which is
-+ * Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
-+ */
-+
-+#ifndef __LINUX_BRIDGE_EFF_H
-+#define __LINUX_BRIDGE_EFF_H
-+#include <linux/if.h>
-+#include <linux/netfilter_bridge.h>
-+#include <linux/if_ether.h>
-+
-+#define EBT_TABLE_MAXNAMELEN 32
-+#define EBT_CHAIN_MAXNAMELEN EBT_TABLE_MAXNAMELEN
-+#define EBT_FUNCTION_MAXNAMELEN EBT_TABLE_MAXNAMELEN
-+
-+// verdicts >0 are "branches"
-+#define EBT_ACCEPT -1
-+#define EBT_DROP -2
-+#define EBT_CONTINUE -3
-+#define EBT_RETURN -4
-+#define NUM_STANDARD_TARGETS 4
-+
-+struct ebt_replace
-+{
-+ char name[EBT_TABLE_MAXNAMELEN];
-+ unsigned int valid_hooks;
-+ // nr of rules in the table
-+ unsigned int nentries;
-+ // total size of the entries
-+ unsigned int entries_size;
-+ // start of the chains
-+ struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
-+ // nr of counters userspace expects back
-+ unsigned int num_counters;
-+ // where the kernel will put the old counters
-+ struct ebt_counter *counters;
-+ char *entries;
-+};
-+
-+struct ebt_counter
-+{
-+ uint64_t pcnt;
-+ uint64_t bcnt;
-+};
-+
-+struct ebt_entries {
-+ // this field is always set to zero
-+ // See EBT_ENTRY_OR_ENTRIES.
-+ // Must be same size as ebt_entry.bitmask
-+ unsigned int distinguisher;
-+ // the chain name
-+ char name[EBT_CHAIN_MAXNAMELEN];
-+ // counter offset for this chain
-+ unsigned int counter_offset;
-+ // one standard (accept, drop, return) per hook
-+ int policy;
-+ // nr. of entries
-+ unsigned int nentries;
-+ // entry list
-+ char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-+};
-+
-+// used for the bitmask of struct ebt_entry
-+
-+// This is a hack to make a difference between an ebt_entry struct and an
-+// ebt_entries struct when traversing the entries from start to end.
-+// Using this simplifies the code alot, while still being able to use
-+// ebt_entries.
-+// Contrary, iptables doesn't use something like ebt_entries and therefore uses
-+// different techniques for naming the policy and such. So, iptables doesn't
-+// need a hack like this.
-+#define EBT_ENTRY_OR_ENTRIES 0x01
-+// these are the normal masks
-+#define EBT_NOPROTO 0x02
-+#define EBT_802_3 0x04
-+#define EBT_SOURCEMAC 0x08
-+#define EBT_DESTMAC 0x10
-+#define EBT_F_MASK (EBT_NOPROTO | EBT_802_3 | EBT_SOURCEMAC | EBT_DESTMAC \
-+ | EBT_ENTRY_OR_ENTRIES)
-+
-+#define EBT_IPROTO 0x01
-+#define EBT_IIN 0x02
-+#define EBT_IOUT 0x04
-+#define EBT_ISOURCE 0x8
-+#define EBT_IDEST 0x10
-+#define EBT_ILOGICALIN 0x20
-+#define EBT_ILOGICALOUT 0x40
-+#define EBT_INV_MASK (EBT_IPROTO | EBT_IIN | EBT_IOUT | EBT_ILOGICALIN \
-+ | EBT_ILOGICALOUT | EBT_ISOURCE | EBT_IDEST)
-+
-+struct ebt_entry_match
-+{
-+ union {
-+ char name[EBT_FUNCTION_MAXNAMELEN];
-+ struct ebt_match *match;
-+ } u;
-+ // size of data
-+ unsigned int match_size;
-+ unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-+};
-+
-+struct ebt_entry_watcher
-+{
-+ union {
-+ char name[EBT_FUNCTION_MAXNAMELEN];
-+ struct ebt_watcher *watcher;
-+ } u;
-+ // size of data
-+ unsigned int watcher_size;
-+ unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-+};
-+
-+struct ebt_entry_target
-+{
-+ union {
-+ char name[EBT_FUNCTION_MAXNAMELEN];
-+ struct ebt_target *target;
-+ } u;
-+ // size of data
-+ unsigned int target_size;
-+ unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-+};
-+
-+#define EBT_STANDARD_TARGET "standard"
-+struct ebt_standard_target
-+{
-+ struct ebt_entry_target target;
-+ int verdict;
-+};
-+
-+// one entry
-+struct ebt_entry {
-+ // this needs to be the first field
-+ unsigned int bitmask;
-+ unsigned int invflags;
-+ uint16_t ethproto;
-+ // the physical in-dev
-+ char in[IFNAMSIZ];
-+ // the logical in-dev
-+ char logical_in[IFNAMSIZ];
-+ // the physical out-dev
-+ char out[IFNAMSIZ];
-+ // the logical out-dev
-+ char logical_out[IFNAMSIZ];
-+ unsigned char sourcemac[ETH_ALEN];
-+ unsigned char sourcemsk[ETH_ALEN];
-+ unsigned char destmac[ETH_ALEN];
-+ unsigned char destmsk[ETH_ALEN];
-+ // sizeof ebt_entry + matches
-+ unsigned int watchers_offset;
-+ // sizeof ebt_entry + matches + watchers
-+ unsigned int target_offset;
-+ // sizeof ebt_entry + matches + watchers + target
-+ unsigned int next_offset;
-+ unsigned char elems[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-+};
-+
-+// [gs]etsockopt numbers
-+#define EBT_BASE_CTL 128
-+
-+#define EBT_SO_SET_ENTRIES (EBT_BASE_CTL)
-+#define EBT_SO_SET_COUNTERS (EBT_SO_SET_ENTRIES+1)
-+#define EBT_SO_SET_MAX (EBT_SO_SET_COUNTERS+1)
-+
-+#define EBT_SO_GET_INFO (EBT_BASE_CTL)
-+#define EBT_SO_GET_ENTRIES (EBT_SO_GET_INFO+1)
-+#define EBT_SO_GET_INIT_INFO (EBT_SO_GET_ENTRIES+1)
-+#define EBT_SO_GET_INIT_ENTRIES (EBT_SO_GET_INIT_INFO+1)
-+#define EBT_SO_GET_MAX (EBT_SO_GET_INIT_ENTRIES+1)
-+
-+#ifdef __KERNEL__
-+
-+// return values for match() functions
-+#define EBT_MATCH 0
-+#define EBT_NOMATCH 1
-+
-+struct ebt_match
-+{
-+ struct list_head list;
-+ const char name[EBT_FUNCTION_MAXNAMELEN];
-+ // 0 == it matches
-+ int (*match)(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *matchdata,
-+ unsigned int datalen);
-+ // 0 == let it in
-+ int (*check)(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *matchdata, unsigned int datalen);
-+ void (*destroy)(void *matchdata, unsigned int datalen);
-+ struct module *me;
-+};
-+
-+struct ebt_watcher
-+{
-+ struct list_head list;
-+ const char name[EBT_FUNCTION_MAXNAMELEN];
-+ void (*watcher)(const struct sk_buff *skb, const struct net_device *in,
-+ const struct net_device *out, const void *watcherdata,
-+ unsigned int datalen);
-+ // 0 == let it in
-+ int (*check)(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *watcherdata, unsigned int datalen);
-+ void (*destroy)(void *watcherdata, unsigned int datalen);
-+ struct module *me;
-+};
-+
-+struct ebt_target
-+{
-+ struct list_head list;
-+ const char name[EBT_FUNCTION_MAXNAMELEN];
-+ // returns one of the standard verdicts
-+ int (*target)(struct sk_buff **pskb, unsigned int hooknr,
-+ const struct net_device *in, const struct net_device *out,
-+ const void *targetdata, unsigned int datalen);
-+ // 0 == let it in
-+ int (*check)(const char *tablename, unsigned int hookmask,
-+ const struct ebt_entry *e, void *targetdata, unsigned int datalen);
-+ void (*destroy)(void *targetdata, unsigned int datalen);
-+ struct module *me;
-+};
-+
-+// used for jumping from and into user defined chains (udc)
-+struct ebt_chainstack
-+{
-+ struct ebt_entries *chaininfo; // pointer to chain data
-+ struct ebt_entry *e; // pointer to entry data
-+ unsigned int n; // n'th entry
-+};
-+
-+struct ebt_table_info
-+{
-+ // total size of the entries
-+ unsigned int entries_size;
-+ unsigned int nentries;
-+ // pointers to the start of the chains
-+ struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
-+ // room to maintain the stack used for jumping from and into udc
-+ struct ebt_chainstack **chainstack;
-+ char *entries;
-+ struct ebt_counter counters[0] ____cacheline_aligned;
-+};
-+
-+struct ebt_table
-+{
-+ struct list_head list;
-+ char name[EBT_TABLE_MAXNAMELEN];
-+ struct ebt_replace *table;
-+ unsigned int valid_hooks;
-+ rwlock_t lock;
-+ // e.g. could be the table explicitly only allows certain
-+ // matches, targets, ... 0 == let it in
-+ int (*check)(const struct ebt_table_info *info,
-+ unsigned int valid_hooks);
-+ // the data used by the kernel
-+ struct ebt_table_info *private;
-+};
-+
-+#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
-+ ~(__alignof__(struct ebt_replace)-1))
-+extern int ebt_register_table(struct ebt_table *table);
-+extern void ebt_unregister_table(struct ebt_table *table);
-+extern int ebt_register_match(struct ebt_match *match);
-+extern void ebt_unregister_match(struct ebt_match *match);
-+extern int ebt_register_watcher(struct ebt_watcher *watcher);
-+extern void ebt_unregister_watcher(struct ebt_watcher *watcher);
-+extern int ebt_register_target(struct ebt_target *target);
-+extern void ebt_unregister_target(struct ebt_target *target);
-+extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ struct ebt_table *table);
-+
-+ // Used in the kernel match() functions
-+#define FWINV(bool,invflg) ((bool) ^ !!(info->invflags & invflg))
-+// True if the hook mask denotes that the rule is in a base chain,
-+// used in the check() functions
-+#define BASE_CHAIN (hookmask & (1 << NF_BR_NUMHOOKS))
-+// Clear the bit in the hook mask that tells if the rule is on a base chain
-+#define CLEAR_BASE_CHAIN_BIT (hookmask &= ~(1 << NF_BR_NUMHOOKS))
-+// True if the target is not a standard target
-+#define INVALID_TARGET (info->target < -NUM_STANDARD_TARGETS || info->target >= 0)
-+
-+#endif /* __KERNEL__ */
-+
-+// blatently stolen from ip_tables.h
-+// fn returns 0 to continue iteration
-+#define EBT_MATCH_ITERATE(e, fn, args...) \
-+({ \
-+ unsigned int __i; \
-+ int __ret = 0; \
-+ struct ebt_entry_match *__match; \
-+ \
-+ for (__i = sizeof(struct ebt_entry); \
-+ __i < (e)->watchers_offset; \
-+ __i += __match->match_size + \
-+ sizeof(struct ebt_entry_match)) { \
-+ __match = (void *)(e) + __i; \
-+ \
-+ __ret = fn(__match , ## args); \
-+ if (__ret != 0) \
-+ break; \
-+ } \
-+ if (__ret == 0) { \
-+ if (__i != (e)->watchers_offset) \
-+ __ret = -EINVAL; \
-+ } \
-+ __ret; \
-+})
-+
-+#define EBT_WATCHER_ITERATE(e, fn, args...) \
-+({ \
-+ unsigned int __i; \
-+ int __ret = 0; \
-+ struct ebt_entry_watcher *__watcher; \
-+ \
-+ for (__i = e->watchers_offset; \
-+ __i < (e)->target_offset; \
-+ __i += __watcher->watcher_size + \
-+ sizeof(struct ebt_entry_watcher)) { \
-+ __watcher = (void *)(e) + __i; \
-+ \
-+ __ret = fn(__watcher , ## args); \
-+ if (__ret != 0) \
-+ break; \
-+ } \
-+ if (__ret == 0) { \
-+ if (__i != (e)->target_offset) \
-+ __ret = -EINVAL; \
-+ } \
-+ __ret; \
-+})
-+
-+#define EBT_ENTRY_ITERATE(entries, size, fn, args...) \
-+({ \
-+ unsigned int __i; \
-+ int __ret = 0; \
-+ struct ebt_entry *__entry; \
-+ \
-+ for (__i = 0; __i < (size);) { \
-+ __entry = (void *)(entries) + __i; \
-+ __ret = fn(__entry , ## args); \
-+ if (__ret != 0) \
-+ break; \
-+ if (__entry->bitmask != 0) \
-+ __i += __entry->next_offset; \
-+ else \
-+ __i += sizeof(struct ebt_entries); \
-+ } \
-+ if (__ret == 0) { \
-+ if (__i != (size)) \
-+ __ret = -EINVAL; \
-+ } \
-+ __ret; \
-+})
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_802_3.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,60 @@
-+#ifndef __LINUX_BRIDGE_EBT_802_3_H
-+#define __LINUX_BRIDGE_EBT_802_3_H
-+
-+#define EBT_802_3_SAP 0x01
-+#define EBT_802_3_TYPE 0x02
-+
-+#define EBT_802_3_MATCH "802_3"
-+
-+/*
-+ * If frame has DSAP/SSAP value 0xaa you must check the SNAP type
-+ * to discover what kind of packet we're carrying.
-+ */
-+#define CHECK_TYPE 0xaa
-+
-+/*
-+ * Control field may be one or two bytes. If the first byte has
-+ * the value 0x03 then the entire length is one byte, otherwise it is two.
-+ * One byte controls are used in Unnumbered Information frames.
-+ * Two byte controls are used in Numbered Information frames.
-+ */
-+#define IS_UI 0x03
-+
-+#define EBT_802_3_MASK (EBT_802_3_SAP | EBT_802_3_TYPE | EBT_802_3)
-+
-+/* ui has one byte ctrl, ni has two */
-+struct hdr_ui {
-+ uint8_t dsap;
-+ uint8_t ssap;
-+ uint8_t ctrl;
-+ uint8_t orig[3];
-+ uint16_t type;
-+};
-+
-+struct hdr_ni {
-+ uint8_t dsap;
-+ uint8_t ssap;
-+ uint16_t ctrl;
-+ uint8_t orig[3];
-+ uint16_t type;
-+};
-+
-+struct ebt_802_3_hdr {
-+ uint8_t daddr[6];
-+ uint8_t saddr[6];
-+ uint16_t len;
-+ union {
-+ struct hdr_ui ui;
-+ struct hdr_ni ni;
-+ } llc;
-+};
-+
-+struct ebt_802_3_info
-+{
-+ uint8_t sap;
-+ uint16_t type;
-+ uint8_t bitmask;
-+ uint8_t invflags;
-+};
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_arp.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,32 @@
-+#ifndef __LINUX_BRIDGE_EBT_ARP_H
-+#define __LINUX_BRIDGE_EBT_ARP_H
-+
-+#define EBT_ARP_OPCODE 0x01
-+#define EBT_ARP_HTYPE 0x02
-+#define EBT_ARP_PTYPE 0x04
-+#define EBT_ARP_SRC_IP 0x08
-+#define EBT_ARP_DST_IP 0x10
-+#define EBT_ARP_SRC_MAC 0x20
-+#define EBT_ARP_DST_MAC 0x40
-+#define EBT_ARP_MASK (EBT_ARP_OPCODE | EBT_ARP_HTYPE | EBT_ARP_PTYPE | \
-+ EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_SRC_MAC | EBT_ARP_DST_MAC)
-+#define EBT_ARP_MATCH "arp"
-+
-+struct ebt_arp_info
-+{
-+ uint16_t htype;
-+ uint16_t ptype;
-+ uint16_t opcode;
-+ uint32_t saddr;
-+ uint32_t smsk;
-+ uint32_t daddr;
-+ uint32_t dmsk;
-+ unsigned char smaddr[ETH_ALEN];
-+ unsigned char smmsk[ETH_ALEN];
-+ unsigned char dmaddr[ETH_ALEN];
-+ unsigned char dmmsk[ETH_ALEN];
-+ uint8_t bitmask;
-+ uint8_t invflags;
-+};
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_ip.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,43 @@
-+/*
-+ * ebt_ip
-+ *
-+ * Authors:
-+ * Bart De Schuymer <bart.de.schuymer@pandora.be>
-+ *
-+ * April, 2002
-+ *
-+ * Changes:
-+ * added ip-sport and ip-dport
-+ * Innominate Security Technologies AG <mhopf@innominate.com>
-+ * September, 2002
-+ */
-+
-+#ifndef __LINUX_BRIDGE_EBT_IP_H
-+#define __LINUX_BRIDGE_EBT_IP_H
-+
-+#define EBT_IP_SOURCE 0x01
-+#define EBT_IP_DEST 0x02
-+#define EBT_IP_TOS 0x04
-+#define EBT_IP_PROTO 0x08
-+#define EBT_IP_SPORT 0x10
-+#define EBT_IP_DPORT 0x20
-+#define EBT_IP_MASK (EBT_IP_SOURCE | EBT_IP_DEST | EBT_IP_TOS | EBT_IP_PROTO |\
-+ EBT_IP_SPORT | EBT_IP_DPORT )
-+#define EBT_IP_MATCH "ip"
-+
-+// the same values are used for the invflags
-+struct ebt_ip_info
-+{
-+ uint32_t saddr;
-+ uint32_t daddr;
-+ uint32_t smsk;
-+ uint32_t dmsk;
-+ uint8_t tos;
-+ uint8_t protocol;
-+ uint8_t bitmask;
-+ uint8_t invflags;
-+ uint16_t sport[2];
-+ uint16_t dport[2];
-+};
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_pkttype.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,11 @@
-+#ifndef __LINUX_BRIDGE_EBT_PKTTYPE_H
-+#define __LINUX_BRIDGE_EBT_PKTTYPE_H
-+
-+struct ebt_pkttype_info
-+{
-+ uint8_t pkt_type;
-+ uint8_t invert;
-+};
-+#define EBT_PKTTYPE_MATCH "pkttype"
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_stp.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,46 @@
-+#ifndef __LINUX_BRIDGE_EBT_STP_H
-+#define __LINUX_BRIDGE_EBT_STP_H
-+
-+#define EBT_STP_TYPE 0x0001
-+
-+#define EBT_STP_FLAGS 0x0002
-+#define EBT_STP_ROOTPRIO 0x0004
-+#define EBT_STP_ROOTADDR 0x0008
-+#define EBT_STP_ROOTCOST 0x0010
-+#define EBT_STP_SENDERPRIO 0x0020
-+#define EBT_STP_SENDERADDR 0x0040
-+#define EBT_STP_PORT 0x0080
-+#define EBT_STP_MSGAGE 0x0100
-+#define EBT_STP_MAXAGE 0x0200
-+#define EBT_STP_HELLOTIME 0x0400
-+#define EBT_STP_FWDD 0x0800
-+
-+#define EBT_STP_MASK 0x0fff
-+#define EBT_STP_CONFIG_MASK 0x0ffe
-+
-+#define EBT_STP_MATCH "stp"
-+
-+struct ebt_stp_config_info
-+{
-+ uint8_t flags;
-+ uint16_t root_priol, root_priou;
-+ char root_addr[6], root_addrmsk[6];
-+ uint32_t root_costl, root_costu;
-+ uint16_t sender_priol, sender_priou;
-+ char sender_addr[6], sender_addrmsk[6];
-+ uint16_t portl, portu;
-+ uint16_t msg_agel, msg_ageu;
-+ uint16_t max_agel, max_ageu;
-+ uint16_t hello_timel, hello_timeu;
-+ uint16_t forward_delayl, forward_delayu;
-+};
-+
-+struct ebt_stp_info
-+{
-+ uint8_t type;
-+ struct ebt_stp_config_info config;
-+ uint16_t bitmask;
-+ uint16_t invflags;
-+};
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_vlan.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,20 @@
-+#ifndef __LINUX_BRIDGE_EBT_VLAN_H
-+#define __LINUX_BRIDGE_EBT_VLAN_H
-+
-+#define EBT_VLAN_ID 0x01
-+#define EBT_VLAN_PRIO 0x02
-+#define EBT_VLAN_ENCAP 0x04
-+#define EBT_VLAN_MASK (EBT_VLAN_ID | EBT_VLAN_PRIO | EBT_VLAN_ENCAP)
-+#define EBT_VLAN_MATCH "vlan"
-+
-+struct ebt_vlan_info {
-+ uint16_t id; /* VLAN ID {1-4095} */
-+ uint8_t prio; /* VLAN User Priority {0-7} */
-+ uint16_t encap; /* VLAN Encapsulated frame code {0-65535} */
-+ uint8_t bitmask; /* Args bitmask bit 1=1 - ID arg,
-+ bit 2=1 User-Priority arg, bit 3=1 encap*/
-+ uint8_t invflags; /* Inverse bitmask bit 1=1 - inversed ID arg,
-+ bit 2=1 - inversed Pirority arg */
-+};
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_log.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,17 @@
-+#ifndef __LINUX_BRIDGE_EBT_LOG_H
-+#define __LINUX_BRIDGE_EBT_LOG_H
-+
-+#define EBT_LOG_IP 0x01 // if the frame is made by ip, log the ip information
-+#define EBT_LOG_ARP 0x02
-+#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
-+#define EBT_LOG_PREFIX_SIZE 30
-+#define EBT_LOG_WATCHER "log"
-+
-+struct ebt_log_info
-+{
-+ uint8_t loglevel;
-+ uint8_t prefix[EBT_LOG_PREFIX_SIZE];
-+ uint32_t bitmask;
-+};
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_nat.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,13 @@
-+#ifndef __LINUX_BRIDGE_EBT_NAT_H
-+#define __LINUX_BRIDGE_EBT_NAT_H
-+
-+struct ebt_nat_info
-+{
-+ unsigned char mac[ETH_ALEN];
-+ // EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN
-+ int target;
-+};
-+#define EBT_SNAT_TARGET "snat"
-+#define EBT_DNAT_TARGET "dnat"
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_redirect.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,11 @@
-+#ifndef __LINUX_BRIDGE_EBT_REDIRECT_H
-+#define __LINUX_BRIDGE_EBT_REDIRECT_H
-+
-+struct ebt_redirect_info
-+{
-+ // EBT_ACCEPT, EBT_DROP or EBT_CONTINUE or EBT_RETURN
-+ int target;
-+};
-+#define EBT_REDIRECT_TARGET "redirect"
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_mark_m.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,15 @@
-+#ifndef __LINUX_BRIDGE_EBT_MARK_M_H
-+#define __LINUX_BRIDGE_EBT_MARK_M_H
-+
-+#define EBT_MARK_AND 0x01
-+#define EBT_MARK_OR 0x02
-+#define EBT_MARK_MASK (EBT_MARK_AND | EBT_MARK_OR)
-+struct ebt_mark_m_info
-+{
-+ unsigned long mark, mask;
-+ uint8_t invert;
-+ uint8_t bitmask;
-+};
-+#define EBT_MARK_MATCH "mark_m"
-+
-+#endif
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_bridge/ebt_mark_t.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,12 @@
-+#ifndef __LINUX_BRIDGE_EBT_MARK_T_H
-+#define __LINUX_BRIDGE_EBT_MARK_T_H
-+
-+struct ebt_mark_t_info
-+{
-+ unsigned long mark;
-+ // EBT_ACCEPT, EBT_DROP or EBT_CONTINUE or EBT_RETURN
-+ int target;
-+};
-+#define EBT_MARK_TARGET "mark"
-+
-+#endif
---- linux-2.4.21/include/linux/netfilter.h Thu Nov 22 20:47:48 2001
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter.h Fri Aug 8 01:09:06 2003
-@@ -117,28 +117,34 @@ extern struct list_head nf_hooks[NPROTO]
- /* This is gross, but inline doesn't cut it for avoiding the function
- call in fast path: gcc doesn't inline (needs value tracking?). --RR */
- #ifdef CONFIG_NETFILTER_DEBUG
--#define NF_HOOK nf_hook_slow
-+#define NF_HOOK(pf, hook, skb, indev, outdev, okfn) \
-+nf_hook_slow((pf), (hook), (skb), (indev), (outdev), (okfn), INT_MIN)
-+#define NF_HOOK_THRESH nf_hook_slow
- #else
- #define NF_HOOK(pf, hook, skb, indev, outdev, okfn) \
- (list_empty(&nf_hooks[(pf)][(hook)]) \
- ? (okfn)(skb) \
-- : nf_hook_slow((pf), (hook), (skb), (indev), (outdev), (okfn)))
-+ : nf_hook_slow((pf), (hook), (skb), (indev), (outdev), (okfn), INT_MIN))
-+#define NF_HOOK_THRESH(pf, hook, skb, indev, outdev, okfn, thresh) \
-+(list_empty(&nf_hooks[(pf)][(hook)]) \
-+ ? (okfn)(skb) \
-+ : nf_hook_slow((pf), (hook), (skb), (indev), (outdev), (okfn), (thresh)))
- #endif
-
- int nf_hook_slow(int pf, unsigned int hook, struct sk_buff *skb,
- struct net_device *indev, struct net_device *outdev,
-- int (*okfn)(struct sk_buff *));
-+ int (*okfn)(struct sk_buff *), int thresh);
-
- /* Call setsockopt() */
--int nf_setsockopt(struct sock *sk, int pf, int optval, char *opt,
-+int nf_setsockopt(struct sock *sk, int pf, int optval, char *opt,
- int len);
- int nf_getsockopt(struct sock *sk, int pf, int optval, char *opt,
- int *len);
-
- /* Packet queuing */
--typedef int (*nf_queue_outfn_t)(struct sk_buff *skb,
-+typedef int (*nf_queue_outfn_t)(struct sk_buff *skb,
- struct nf_info *info, void *data);
--extern int nf_register_queue_handler(int pf,
-+extern int nf_register_queue_handler(int pf,
- nf_queue_outfn_t outfn, void *data);
- extern int nf_unregister_queue_handler(int pf);
- extern void nf_reinject(struct sk_buff *skb,
---- linux-2.4.21/include/linux/netfilter_ipv4.h Mon Feb 25 20:38:13 2002
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_ipv4.h Fri Aug 8 01:09:06 2003
-@@ -52,8 +52,10 @@
- enum nf_ip_hook_priorities {
- NF_IP_PRI_FIRST = INT_MIN,
- NF_IP_PRI_CONNTRACK = -200,
-+ NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD = -175,
- NF_IP_PRI_MANGLE = -150,
- NF_IP_PRI_NAT_DST = -100,
-+ NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50,
- NF_IP_PRI_FILTER = 0,
- NF_IP_PRI_NAT_SRC = 100,
- NF_IP_PRI_LAST = INT_MAX,
---- linux-2.4.21/include/linux/skbuff.h Fri Jun 13 16:51:39 2003
-+++ linux-2.4.21-ebt-brnf-3/include/linux/skbuff.h Fri Aug 8 01:09:06 2003
-@@ -92,6 +92,17 @@ struct nf_conntrack {
- struct nf_ct_info {
- struct nf_conntrack *master;
- };
-+
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+struct nf_bridge_info {
-+ atomic_t use;
-+ struct net_device *physindev;
-+ struct net_device *physoutdev;
-+ unsigned int mask;
-+ unsigned long hh[16 / sizeof(unsigned long)];
-+};
-+#endif
-+
- #endif
-
- struct sk_buff_head {
-@@ -204,6 +215,9 @@ struct sk_buff {
- #ifdef CONFIG_NETFILTER_DEBUG
- unsigned int nf_debug;
- #endif
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ struct nf_bridge_info *nf_bridge; /* Saved data about a bridged frame - see br_netfilter.c */
-+#endif
- #endif /*CONFIG_NETFILTER*/
-
- #if defined(CONFIG_HIPPI)
-@@ -278,7 +292,7 @@ static inline struct sk_buff *skb_get(st
- * If users==1, we are the only owner and are can avoid redundant
- * atomic change.
- */
--
-+
- /**
- * kfree_skb - free an sk_buff
- * @skb: buffer to free
-@@ -286,7 +300,7 @@ static inline struct sk_buff *skb_get(st
- * Drop a reference to the buffer and free it if the usage count has
- * hit zero.
- */
--
-+
- static inline void kfree_skb(struct sk_buff *skb)
- {
- if (atomic_read(&skb->users) == 1 || atomic_dec_and_test(&skb->users))
-@@ -1165,6 +1179,20 @@ nf_conntrack_get(struct nf_ct_info *nfct
- if (nfct)
- atomic_inc(&nfct->master->use);
- }
-+
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge)
-+{
-+ if (nf_bridge && atomic_dec_and_test(&nf_bridge->use))
-+ kfree(nf_bridge);
-+}
-+static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge)
-+{
-+ if (nf_bridge)
-+ atomic_inc(&nf_bridge->use);
-+}
-+#endif
-+
- #endif
-
- #endif /* __KERNEL__ */
---- linux-2.4.21/net/core/netfilter.c Sat Aug 3 02:39:46 2002
-+++ linux-2.4.21-ebt-brnf-3/net/core/netfilter.c Fri Aug 8 01:09:06 2003
-@@ -1,4 +1,4 @@
--/* netfilter.c: look after the filters for various protocols.
-+/* netfilter.c: look after the filters for various protocols.
- * Heavily influenced by the old firewall.c by David Bonn and Alan Cox.
- *
- * Thanks to Rob `CmdrTaco' Malda for not influencing this code in any
-@@ -342,10 +342,15 @@ static unsigned int nf_iterate(struct li
- const struct net_device *indev,
- const struct net_device *outdev,
- struct list_head **i,
-- int (*okfn)(struct sk_buff *))
-+ int (*okfn)(struct sk_buff *),
-+ int hook_thresh)
- {
- for (*i = (*i)->next; *i != head; *i = (*i)->next) {
- struct nf_hook_ops *elem = (struct nf_hook_ops *)*i;
-+
-+ if (hook_thresh > elem->priority)
-+ continue;
-+
- switch (elem->hook(hook, skb, indev, outdev, okfn)) {
- case NF_QUEUE:
- return NF_QUEUE;
-@@ -365,7 +370,7 @@ static unsigned int nf_iterate(struct li
- break;
-
- default:
-- NFDEBUG("Evil return from %p(%u).\n",
-+ NFDEBUG("Evil return from %p(%u).\n",
- elem->hook, hook);
- #endif
- }
-@@ -374,7 +379,7 @@ static unsigned int nf_iterate(struct li
- }
-
- int nf_register_queue_handler(int pf, nf_queue_outfn_t outfn, void *data)
--{
-+{
- int ret;
-
- br_write_lock_bh(BR_NETPROTO_LOCK);
-@@ -400,12 +405,12 @@ int nf_unregister_queue_handler(int pf)
- return 0;
- }
-
--/*
-- * Any packet that leaves via this function must come back
-+/*
-+ * Any packet that leaves via this function must come back
- * through nf_reinject().
- */
--static void nf_queue(struct sk_buff *skb,
-- struct list_head *elem,
-+static void nf_queue(struct sk_buff *skb,
-+ struct list_head *elem,
- int pf, unsigned int hook,
- struct net_device *indev,
- struct net_device *outdev,
-@@ -413,6 +418,10 @@ static void nf_queue(struct sk_buff *skb
- {
- int status;
- struct nf_info *info;
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ struct net_device *physindev = NULL;
-+ struct net_device *physoutdev = NULL;
-+#endif
-
- if (!queue_handler[pf].outfn) {
- kfree_skb(skb);
-@@ -428,18 +437,31 @@ static void nf_queue(struct sk_buff *skb
- return;
- }
-
-- *info = (struct nf_info) {
-+ *info = (struct nf_info) {
- (struct nf_hook_ops *)elem, pf, hook, indev, outdev, okfn };
-
- /* Bump dev refs so they don't vanish while packet is out */
- if (indev) dev_hold(indev);
- if (outdev) dev_hold(outdev);
-
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ if (skb->nf_bridge) {
-+ physindev = skb->nf_bridge->physindev;
-+ if (physindev) dev_hold(physindev);
-+ physoutdev = skb->nf_bridge->physoutdev;
-+ if (physoutdev) dev_hold(physoutdev);
-+ }
-+#endif
-+
- status = queue_handler[pf].outfn(skb, info, queue_handler[pf].data);
- if (status < 0) {
- /* James M doesn't say fuck enough. */
- if (indev) dev_put(indev);
- if (outdev) dev_put(outdev);
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ if (physindev) dev_put(physindev);
-+ if (physoutdev) dev_put(physoutdev);
-+#endif
- kfree(info);
- kfree_skb(skb);
- return;
-@@ -449,7 +471,8 @@ static void nf_queue(struct sk_buff *skb
- int nf_hook_slow(int pf, unsigned int hook, struct sk_buff *skb,
- struct net_device *indev,
- struct net_device *outdev,
-- int (*okfn)(struct sk_buff *))
-+ int (*okfn)(struct sk_buff *),
-+ int hook_thresh)
- {
- struct list_head *elem;
- unsigned int verdict;
-@@ -481,7 +504,7 @@ int nf_hook_slow(int pf, unsigned int ho
-
- elem = &nf_hooks[pf][hook];
- verdict = nf_iterate(&nf_hooks[pf][hook], &skb, hook, indev,
-- outdev, &elem, okfn);
-+ outdev, &elem, okfn, hook_thresh);
- if (verdict == NF_QUEUE) {
- NFDEBUG("nf_hook: Verdict = QUEUE.\n");
- nf_queue(skb, elem, pf, hook, indev, outdev, okfn);
-@@ -510,6 +533,14 @@ void nf_reinject(struct sk_buff *skb, st
-
- /* We don't have BR_NETPROTO_LOCK here */
- br_read_lock_bh(BR_NETPROTO_LOCK);
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ if (skb->nf_bridge) {
-+ if (skb->nf_bridge->physindev)
-+ dev_put(skb->nf_bridge->physindev);
-+ if (skb->nf_bridge->physoutdev)
-+ dev_put(skb->nf_bridge->physoutdev);
-+ }
-+#endif
- for (i = nf_hooks[info->pf][info->hook].next; i != elem; i = i->next) {
- if (i == &nf_hooks[info->pf][info->hook]) {
- /* The module which sent it to userspace is gone. */
-@@ -528,9 +559,9 @@ void nf_reinject(struct sk_buff *skb, st
-
- if (verdict == NF_ACCEPT) {
- verdict = nf_iterate(&nf_hooks[info->pf][info->hook],
-- &skb, info->hook,
-+ &skb, info->hook,
- info->indev, info->outdev, &elem,
-- info->okfn);
-+ info->okfn, INT_MIN);
- }
-
- switch (verdict) {
-@@ -539,20 +570,19 @@ void nf_reinject(struct sk_buff *skb, st
- break;
-
- case NF_QUEUE:
-- nf_queue(skb, elem, info->pf, info->hook,
-+ nf_queue(skb, elem, info->pf, info->hook,
- info->indev, info->outdev, info->okfn);
- break;
--
-- case NF_DROP:
-- kfree_skb(skb);
-- break;
- }
- br_read_unlock_bh(BR_NETPROTO_LOCK);
-
- /* Release those devices we held, or Alexey will kill me. */
- if (info->indev) dev_put(info->indev);
- if (info->outdev) dev_put(info->outdev);
--
-+
-+ if (verdict == NF_DROP)
-+ kfree_skb(skb);
-+
- kfree(info);
- return;
- }
---- linux-2.4.21/net/core/skbuff.c Fri Jun 13 16:51:39 2003
-+++ linux-2.4.21-ebt-brnf-3/net/core/skbuff.c Fri Aug 8 01:09:06 2003
-@@ -245,6 +245,9 @@ static inline void skb_headerinit(void *
- #ifdef CONFIG_NETFILTER_DEBUG
- skb->nf_debug = 0;
- #endif
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ skb->nf_bridge = NULL;
-+#endif
- #endif
- #ifdef CONFIG_NET_SCHED
- skb->tc_index = 0;
-@@ -325,6 +328,9 @@ void __kfree_skb(struct sk_buff *skb)
- }
- #ifdef CONFIG_NETFILTER
- nf_conntrack_put(skb->nfct);
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ nf_bridge_put(skb->nf_bridge);
-+#endif
- #endif
- skb_headerinit(skb, NULL, 0); /* clean state */
- kfree_skbmem(skb);
-@@ -391,6 +397,9 @@ struct sk_buff *skb_clone(struct sk_buff
- #ifdef CONFIG_NETFILTER_DEBUG
- C(nf_debug);
- #endif
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ C(nf_bridge);
-+#endif
- #endif /*CONFIG_NETFILTER*/
- #if defined(CONFIG_HIPPI)
- C(private);
-@@ -403,6 +412,9 @@ struct sk_buff *skb_clone(struct sk_buff
- skb->cloned = 1;
- #ifdef CONFIG_NETFILTER
- nf_conntrack_get(skb->nfct);
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ nf_bridge_get(skb->nf_bridge);
-+#endif
- #endif
- return n;
- }
-@@ -436,6 +448,10 @@ static void copy_skb_header(struct sk_bu
- nf_conntrack_get(new->nfct);
- #ifdef CONFIG_NETFILTER_DEBUG
- new->nf_debug=old->nf_debug;
-+#endif
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ new->nf_bridge=old->nf_bridge;
-+ nf_bridge_get(new->nf_bridge);
- #endif
- #endif
- #ifdef CONFIG_NET_SCHED
---- linux-2.4.21/net/ipv4/netfilter/ip_tables.c Fri Jun 13 16:51:39 2003
-+++ linux-2.4.21-ebt-brnf-3/net/ipv4/netfilter/ip_tables.c Fri Aug 8 01:09:06 2003
-@@ -121,12 +121,19 @@ static LIST_HEAD(ipt_tables);
- static inline int
- ip_packet_match(const struct iphdr *ip,
- const char *indev,
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ const char *physindev,
-+#endif
- const char *outdev,
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ const char *physoutdev,
-+#endif
- const struct ipt_ip *ipinfo,
- int isfrag)
- {
- size_t i;
- unsigned long ret;
-+ unsigned long ret2 = 1;
-
- #define FWINV(bool,invflg) ((bool) ^ !!(ipinfo->invflags & invflg))
-
-@@ -156,7 +163,15 @@ ip_packet_match(const struct iphdr *ip,
- & ((const unsigned long *)ipinfo->iniface_mask)[i];
- }
-
-- if (FWINV(ret != 0, IPT_INV_VIA_IN)) {
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ for (i = 0, ret2 = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
-+ ret2 |= (((const unsigned long *)physindev)[i]
-+ ^ ((const unsigned long *)ipinfo->iniface)[i])
-+ & ((const unsigned long *)ipinfo->iniface_mask)[i];
-+ }
-+#endif
-+
-+ if (FWINV(ret != 0 && ret2 != 0, IPT_INV_VIA_IN)) {
- dprintf("VIA in mismatch (%s vs %s).%s\n",
- indev, ipinfo->iniface,
- ipinfo->invflags&IPT_INV_VIA_IN ?" (INV)":"");
-@@ -169,7 +184,15 @@ ip_packet_match(const struct iphdr *ip,
- & ((const unsigned long *)ipinfo->outiface_mask)[i];
- }
-
-- if (FWINV(ret != 0, IPT_INV_VIA_OUT)) {
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ for (i = 0, ret2 = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
-+ ret2 |= (((const unsigned long *)physoutdev)[i]
-+ ^ ((const unsigned long *)ipinfo->outiface)[i])
-+ & ((const unsigned long *)ipinfo->outiface_mask)[i];
-+ }
-+#endif
-+
-+ if (FWINV(ret != 0 && ret2 != 0, IPT_INV_VIA_OUT)) {
- dprintf("VIA out mismatch (%s vs %s).%s\n",
- outdev, ipinfo->outiface,
- ipinfo->invflags&IPT_INV_VIA_OUT ?" (INV)":"");
-@@ -268,6 +291,9 @@ ipt_do_table(struct sk_buff **pskb,
- /* Initializing verdict to NF_DROP keeps gcc happy. */
- unsigned int verdict = NF_DROP;
- const char *indev, *outdev;
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ const char *physindev, *physoutdev;
-+#endif
- void *table_base;
- struct ipt_entry *e, *back;
-
-@@ -277,6 +303,13 @@ ipt_do_table(struct sk_buff **pskb,
- datalen = (*pskb)->len - ip->ihl * 4;
- indev = in ? in->name : nulldevname;
- outdev = out ? out->name : nulldevname;
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ physindev = ((*pskb)->nf_bridge && (*pskb)->nf_bridge->physindev) ?
-+ (*pskb)->nf_bridge->physindev->name : nulldevname;
-+ physoutdev = ((*pskb)->nf_bridge && (*pskb)->nf_bridge->physoutdev) ?
-+ (*pskb)->nf_bridge->physoutdev->name : nulldevname;
-+#endif
-+
- /* We handle fragments by dealing with the first fragment as
- * if it was a normal packet. All other fragments are treated
- * normally, except that they will NEVER match rules that ask
-@@ -312,7 +345,15 @@ ipt_do_table(struct sk_buff **pskb,
- IP_NF_ASSERT(e);
- IP_NF_ASSERT(back);
- (*pskb)->nfcache |= e->nfcache;
-- if (ip_packet_match(ip, indev, outdev, &e->ip, offset)) {
-+ if (ip_packet_match(ip, indev,
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ physindev,
-+#endif
-+ outdev,
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ physoutdev,
-+#endif
-+ &e->ip, offset)) {
- struct ipt_entry_target *t;
-
- if (IPT_MATCH_ITERATE(e, do_match,
---- linux-2.4.21/net/ipv4/ip_output.c Fri Nov 29 00:53:15 2002
-+++ linux-2.4.21-ebt-brnf-3/net/ipv4/ip_output.c Fri Aug 8 01:09:06 2003
-@@ -879,6 +879,10 @@ int ip_fragment(struct sk_buff *skb, int
- /* Connection association is same as pre-frag packet */
- skb2->nfct = skb->nfct;
- nf_conntrack_get(skb2->nfct);
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ skb2->nf_bridge = skb->nf_bridge;
-+ nf_bridge_get(skb2->nf_bridge);
-+#endif
- #ifdef CONFIG_NETFILTER_DEBUG
- skb2->nf_debug = skb->nf_debug;
- #endif
---- linux-2.4.21/net/ipv4/netfilter/ipt_LOG.c Mon Feb 25 20:38:14 2002
-+++ linux-2.4.21-ebt-brnf-3/net/ipv4/netfilter/ipt_LOG.c Fri Aug 8 01:09:06 2003
-@@ -289,6 +289,18 @@ ipt_log_target(struct sk_buff **pskb,
- loginfo->prefix,
- in ? in->name : "",
- out ? out->name : "");
-+#if defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)
-+ if ((*pskb)->nf_bridge) {
-+ struct net_device *physindev = (*pskb)->nf_bridge->physindev;
-+ struct net_device *physoutdev = (*pskb)->nf_bridge->physoutdev;
-+
-+ if (physindev && in != physindev)
-+ printk("PHYSIN=%s ", physindev->name);
-+ if (physoutdev && out != physoutdev)
-+ printk("PHYSOUT=%s ", physoutdev->name);
-+ }
-+#endif
-+
- if (in && !out) {
- /* MAC logging for input chain only. */
- printk("MAC=");
---- linux-2.4.21/net/ipv4/netfilter/Makefile Fri Jun 13 16:51:39 2003
-+++ linux-2.4.21-ebt-brnf-3/net/ipv4/netfilter/Makefile Fri Aug 8 01:09:06 2003
-@@ -84,6 +84,8 @@ obj-$(CONFIG_IP_NF_MATCH_CONNTRACK) += i
- obj-$(CONFIG_IP_NF_MATCH_UNCLEAN) += ipt_unclean.o
- obj-$(CONFIG_IP_NF_MATCH_TCPMSS) += ipt_tcpmss.o
-
-+obj-$(CONFIG_IP_NF_MATCH_PHYSDEV) += ipt_physdev.o
-+
- # targets
- obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
- obj-$(CONFIG_IP_NF_TARGET_MIRROR) += ipt_MIRROR.o
---- linux-2.4.21/net/ipv4/netfilter/Config.in Fri Jun 13 16:51:39 2003
-+++ linux-2.4.21-ebt-brnf-3/net/ipv4/netfilter/Config.in Fri Aug 8 01:09:06 2003
-@@ -43,6 +43,9 @@ if [ "$CONFIG_IP_NF_IPTABLES" != "n" ];
- dep_tristate ' Unclean match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_UNCLEAN $CONFIG_IP_NF_IPTABLES
- dep_tristate ' Owner match support (EXPERIMENTAL)' CONFIG_IP_NF_MATCH_OWNER $CONFIG_IP_NF_IPTABLES
- fi
-+ if [ "$CONFIG_BRIDGE" != "n" ]; then
-+ dep_tristate ' Physdev match support' CONFIG_IP_NF_MATCH_PHYSDEV
-+ fi
- # The targets
- dep_tristate ' Packet filtering' CONFIG_IP_NF_FILTER $CONFIG_IP_NF_IPTABLES
- if [ "$CONFIG_IP_NF_FILTER" != "n" ]; then
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/bridge/br_netfilter.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,636 @@
-+/*
-+ * Handle firewalling
-+ * Linux ethernet bridge
-+ *
-+ * Authors:
-+ * Lennert Buytenhek <buytenh@gnu.org>
-+ * Bart De Schuymer <bdschuym@pandora.be>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ *
-+ * Lennert dedicates this file to Kerstin Wurdinger.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/ip.h>
-+#include <linux/netdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_ether.h>
-+#include <linux/netfilter_bridge.h>
-+#include <linux/netfilter_ipv4.h>
-+#include <linux/in_route.h>
-+#include <net/ip.h>
-+#include <asm/uaccess.h>
-+#include <asm/checksum.h>
-+#include "br_private.h"
-+
-+
-+#define skb_origaddr(skb) (((struct bridge_skb_cb *) \
-+ (skb->cb))->daddr.ipv4)
-+#define store_orig_dstaddr(skb) (skb_origaddr(skb) = (skb)->nh.iph->daddr)
-+#define dnat_took_place(skb) (skb_origaddr(skb) != (skb)->nh.iph->daddr)
-+#define clear_cb(skb) (memset(&skb_origaddr(skb), 0, \
-+ sizeof(struct bridge_skb_cb)))
-+
-+#define has_bridge_parent(device) ((device)->br_port != NULL)
-+#define bridge_parent(device) (&((device)->br_port->br->dev))
-+
-+/* We need these fake structures to make netfilter happy --
-+ * lots of places assume that skb->dst != NULL, which isn't
-+ * all that unreasonable.
-+ *
-+ * Currently, we fill in the PMTU entry because netfilter
-+ * refragmentation needs it, and the rt_flags entry because
-+ * ipt_REJECT needs it. Future netfilter modules might
-+ * require us to fill additional fields.
-+ */
-+static struct net_device __fake_net_device = {
-+ .hard_header_len = ETH_HLEN
-+};
-+
-+static struct rtable __fake_rtable = {
-+ u: {
-+ dst: {
-+ __refcnt: ATOMIC_INIT(1),
-+ dev: &__fake_net_device,
-+ pmtu: 1500
-+ }
-+ },
-+
-+ rt_flags: 0
-+};
-+
-+
-+/* PF_BRIDGE/PRE_ROUTING *********************************************/
-+static void __br_dnat_complain(void)
-+{
-+ static unsigned long last_complaint = 0;
-+
-+ if (jiffies - last_complaint >= 5 * HZ) {
-+ printk(KERN_WARNING "Performing cross-bridge DNAT requires IP "
-+ "forwarding to be enabled\n");
-+ last_complaint = jiffies;
-+ }
-+}
-+
-+
-+/* This requires some explaining. If DNAT has taken place,
-+ * we will need to fix up the destination Ethernet address,
-+ * and this is a tricky process.
-+ *
-+ * There are two cases to consider:
-+ * 1. The packet was DNAT'ed to a device in the same bridge
-+ * port group as it was received on. We can still bridge
-+ * the packet.
-+ * 2. The packet was DNAT'ed to a different device, either
-+ * a non-bridged device or another bridge port group.
-+ * The packet will need to be routed.
-+ *
-+ * The correct way of distinguishing between these two cases is to
-+ * call ip_route_input() and to look at skb->dst->dev, which is
-+ * changed to the destination device if ip_route_input() succeeds.
-+ *
-+ * Let us first consider the case that ip_route_input() succeeds:
-+ *
-+ * If skb->dst->dev equals the logical bridge device the packet
-+ * came in on, we can consider this bridging. We then call
-+ * skb->dst->output() which will make the packet enter br_nf_local_out()
-+ * not much later. In that function it is assured that the iptables
-+ * FORWARD chain is traversed for the packet.
-+ *
-+ * Otherwise, the packet is considered to be routed and we just
-+ * change the destination MAC address so that the packet will
-+ * later be passed up to the IP stack to be routed.
-+ *
-+ * Let us now consider the case that ip_route_input() fails:
-+ *
-+ * After a "echo '0' > /proc/sys/net/ipv4/ip_forward" ip_route_input()
-+ * will fail, while __ip_route_output_key() will return success. The source
-+ * address for __ip_route_output_key() is set to zero, so __ip_route_output_key
-+ * thinks we're handling a locally generated packet and won't care
-+ * if IP forwarding is allowed. We send a warning message to the users's
-+ * log telling her to put IP forwarding on.
-+ *
-+ * ip_route_input() will also fail if there is no route available.
-+ * In that case we just drop the packet.
-+ *
-+ * --Lennert, 20020411
-+ * --Bart, 20020416 (updated)
-+ * --Bart, 20021007 (updated)
-+ */
-+
-+static int br_nf_pre_routing_finish_bridge(struct sk_buff *skb)
-+{
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug |= (1 << NF_BR_PRE_ROUTING) | (1 << NF_BR_FORWARD);
-+#endif
-+
-+ if (skb->pkt_type == PACKET_OTHERHOST) {
-+ skb->pkt_type = PACKET_HOST;
-+ skb->nf_bridge->mask |= BRNF_PKT_TYPE;
-+ }
-+
-+ skb->dev = bridge_parent(skb->dev);
-+ skb->dst->output(skb);
-+ return 0;
-+}
-+
-+static int br_nf_pre_routing_finish(struct sk_buff *skb)
-+{
-+ struct net_device *dev = skb->dev;
-+ struct iphdr *iph = skb->nh.iph;
-+ struct nf_bridge_info *nf_bridge = skb->nf_bridge;
-+
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug ^= (1 << NF_BR_PRE_ROUTING);
-+#endif
-+
-+ if (nf_bridge->mask & BRNF_PKT_TYPE) {
-+ skb->pkt_type = PACKET_OTHERHOST;
-+ nf_bridge->mask ^= BRNF_PKT_TYPE;
-+ }
-+
-+ if (dnat_took_place(skb)) {
-+ if (ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
-+ dev)) {
-+ struct rtable *rt;
-+
-+ if (!ip_route_output(&rt, iph->daddr, 0, iph->tos, 0)) {
-+ /* Bridged-and-DNAT'ed traffic doesn't
-+ * require ip_forwarding.
-+ */
-+ if (((struct dst_entry *)rt)->dev == dev) {
-+ skb->dst = (struct dst_entry *)rt;
-+ goto bridged_dnat;
-+ }
-+ __br_dnat_complain();
-+ dst_release((struct dst_entry *)rt);
-+ }
-+ kfree_skb(skb);
-+ return 0;
-+ } else {
-+ if (skb->dst->dev == dev) {
-+bridged_dnat:
-+ /* Tell br_nf_local_out this is a
-+ * bridged frame
-+ */
-+ nf_bridge->mask |= BRNF_BRIDGED_DNAT;
-+ skb->dev = nf_bridge->physindev;
-+ clear_cb(skb);
-+ NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING,
-+ skb, skb->dev, NULL,
-+ br_nf_pre_routing_finish_bridge,
-+ 1);
-+ return 0;
-+ }
-+ memcpy(skb->mac.ethernet->h_dest, dev->dev_addr,
-+ ETH_ALEN);
-+ }
-+ } else {
-+ skb->dst = (struct dst_entry *)&__fake_rtable;
-+ dst_hold(skb->dst);
-+ }
-+
-+ clear_cb(skb);
-+ skb->dev = nf_bridge->physindev;
-+ NF_HOOK_THRESH(PF_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
-+ br_handle_frame_finish, 1);
-+
-+ return 0;
-+}
-+
-+/* Replicate the checks that IPv4 does on packet reception.
-+ * Set skb->dev to the bridge device (i.e. parent of the
-+ * receiving device) to make netfilter happy, the REDIRECT
-+ * target in particular. Save the original destination IP
-+ * address to be able to detect DNAT afterwards.
-+ */
-+static unsigned int br_nf_pre_routing(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ struct iphdr *iph;
-+ __u32 len;
-+ struct sk_buff *skb;
-+ struct nf_bridge_info *nf_bridge;
-+
-+ if ((*pskb)->protocol != __constant_htons(ETH_P_IP))
-+ return NF_ACCEPT;
-+
-+ if ((skb = skb_share_check(*pskb, GFP_ATOMIC)) == NULL)
-+ goto out;
-+
-+ if (!pskb_may_pull(skb, sizeof(struct iphdr)))
-+ goto inhdr_error;
-+
-+ iph = skb->nh.iph;
-+ if (iph->ihl < 5 || iph->version != 4)
-+ goto inhdr_error;
-+
-+ if (!pskb_may_pull(skb, 4*iph->ihl))
-+ goto inhdr_error;
-+
-+ iph = skb->nh.iph;
-+ if (ip_fast_csum((__u8 *)iph, iph->ihl) != 0)
-+ goto inhdr_error;
-+
-+ len = ntohs(iph->tot_len);
-+ if (skb->len < len || len < 4*iph->ihl)
-+ goto inhdr_error;
-+
-+ if (skb->len > len) {
-+ __pskb_trim(skb, len);
-+ if (skb->ip_summed == CHECKSUM_HW)
-+ skb->ip_summed = CHECKSUM_NONE;
-+ }
-+
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug ^= (1 << NF_IP_PRE_ROUTING);
-+#endif
-+ if ((nf_bridge = nf_bridge_alloc(skb)) == NULL)
-+ return NF_DROP;
-+
-+ if (skb->pkt_type == PACKET_OTHERHOST) {
-+ skb->pkt_type = PACKET_HOST;
-+ nf_bridge->mask |= BRNF_PKT_TYPE;
-+ }
-+
-+ nf_bridge->physindev = skb->dev;
-+ skb->dev = bridge_parent(skb->dev);
-+ store_orig_dstaddr(skb);
-+
-+ NF_HOOK(PF_INET, NF_IP_PRE_ROUTING, skb, skb->dev, NULL,
-+ br_nf_pre_routing_finish);
-+
-+ return NF_STOLEN;
-+
-+inhdr_error:
-+// IP_INC_STATS_BH(IpInHdrErrors);
-+out:
-+ return NF_DROP;
-+}
-+
-+
-+/* PF_BRIDGE/LOCAL_IN ************************************************/
-+/* The packet is locally destined, which requires a real
-+ * dst_entry, so detach the fake one. On the way up, the
-+ * packet would pass through PRE_ROUTING again (which already
-+ * took place when the packet entered the bridge), but we
-+ * register an IPv4 PRE_ROUTING 'sabotage' hook that will
-+ * prevent this from happening.
-+ */
-+static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ struct sk_buff *skb = *pskb;
-+
-+ if (skb->protocol != __constant_htons(ETH_P_IP))
-+ return NF_ACCEPT;
-+
-+ if (skb->dst == (struct dst_entry *)&__fake_rtable) {
-+ dst_release(skb->dst);
-+ skb->dst = NULL;
-+ }
-+
-+ return NF_ACCEPT;
-+}
-+
-+
-+/* PF_BRIDGE/FORWARD *************************************************/
-+static int br_nf_forward_finish(struct sk_buff *skb)
-+{
-+ struct nf_bridge_info *nf_bridge = skb->nf_bridge;
-+
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug ^= (1 << NF_BR_FORWARD);
-+#endif
-+
-+ if (nf_bridge->mask & BRNF_PKT_TYPE) {
-+ skb->pkt_type = PACKET_OTHERHOST;
-+ nf_bridge->mask ^= BRNF_PKT_TYPE;
-+ }
-+
-+ NF_HOOK_THRESH(PF_BRIDGE, NF_BR_FORWARD, skb, nf_bridge->physindev,
-+ skb->dev, br_forward_finish, 1);
-+
-+ return 0;
-+}
-+
-+/* This is the 'purely bridged' case. We pass the packet to
-+ * netfilter with indev and outdev set to the bridge device,
-+ * but we are still able to filter on the 'real' indev/outdev
-+ * because of the ipt_physdev.c module.
-+ */
-+static unsigned int br_nf_forward(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ struct sk_buff *skb = *pskb;
-+ struct nf_bridge_info *nf_bridge;
-+
-+ if (skb->protocol != __constant_htons(ETH_P_IP))
-+ return NF_ACCEPT;
-+
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug ^= (1 << NF_BR_FORWARD);
-+#endif
-+
-+ nf_bridge = skb->nf_bridge;
-+ if (skb->pkt_type == PACKET_OTHERHOST) {
-+ skb->pkt_type = PACKET_HOST;
-+ nf_bridge->mask |= BRNF_PKT_TYPE;
-+ }
-+
-+ nf_bridge->mask |= BRNF_BRIDGED; /* The physdev module checks on this */
-+ nf_bridge->physoutdev = skb->dev;
-+
-+ NF_HOOK(PF_INET, NF_IP_FORWARD, skb, bridge_parent(nf_bridge->physindev),
-+ bridge_parent(skb->dev), br_nf_forward_finish);
-+
-+ return NF_STOLEN;
-+}
-+
-+
-+/* PF_BRIDGE/LOCAL_OUT ***********************************************/
-+static int br_nf_local_out_finish(struct sk_buff *skb)
-+{
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug &= ~(1 << NF_BR_LOCAL_OUT);
-+#endif
-+
-+ NF_HOOK_THRESH(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
-+ br_forward_finish, NF_BR_PRI_FIRST + 1);
-+
-+ return 0;
-+}
-+
-+
-+/* This function sees both locally originated IP packets and forwarded
-+ * IP packets (in both cases the destination device is a bridge
-+ * device). It also sees bridged-and-DNAT'ed packets.
-+ * To be able to filter on the physical bridge devices (with the ipt_physdev.c
-+ * module), we steal packets destined to a bridge device away from the
-+ * PF_INET/FORWARD and PF_INET/OUTPUT hook functions, and give them back later,
-+ * when we have determined the real output device. This is done in here.
-+ *
-+ * If (nf_bridge->mask & BRNF_BRIDGED_DNAT) then the packet is bridged
-+ * and we fake the PF_BRIDGE/FORWARD hook. The function br_nf_forward()
-+ * will then fake the PF_INET/FORWARD hook. br_nf_local_out() has priority
-+ * NF_BR_PRI_FIRST, so no relevant PF_BRIDGE/INPUT functions have been nor
-+ * will be executed.
-+ * Otherwise, if nf_bridge->physindev is NULL, the bridge-nf code never touched
-+ * this packet before, and so the packet was locally originated. We fake
-+ * the PF_INET/LOCAL_OUT hook.
-+ * Finally, if nf_bridge->physindev isn't NULL, then the packet was IP routed,
-+ * so we fake the PF_INET/FORWARD hook. ipv4_sabotage_out() makes sure
-+ * even routed packets that didn't arrive on a bridge interface have their
-+ * nf_bridge->physindev set.
-+ */
-+
-+static unsigned int br_nf_local_out(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*_okfn)(struct sk_buff *))
-+{
-+ int (*okfn)(struct sk_buff *skb);
-+ struct net_device *realindev;
-+ struct sk_buff *skb = *pskb;
-+ struct nf_bridge_info *nf_bridge;
-+
-+ if (skb->protocol != __constant_htons(ETH_P_IP))
-+ return NF_ACCEPT;
-+
-+ /* Sometimes we get packets with NULL ->dst here (for example,
-+ * running a dhcp client daemon triggers this).
-+ */
-+ if (skb->dst == NULL)
-+ return NF_ACCEPT;
-+
-+ nf_bridge = skb->nf_bridge;
-+ nf_bridge->physoutdev = skb->dev;
-+
-+ realindev = nf_bridge->physindev;
-+
-+ /* Bridged, take PF_BRIDGE/FORWARD.
-+ * (see big note in front of br_nf_pre_routing_finish)
-+ */
-+ if (nf_bridge->mask & BRNF_BRIDGED_DNAT) {
-+ okfn = br_forward_finish;
-+
-+ if (nf_bridge->mask & BRNF_PKT_TYPE) {
-+ skb->pkt_type = PACKET_OTHERHOST;
-+ nf_bridge->mask ^= BRNF_PKT_TYPE;
-+ }
-+
-+ NF_HOOK(PF_BRIDGE, NF_BR_FORWARD, skb, realindev,
-+ skb->dev, okfn);
-+ } else {
-+ okfn = br_nf_local_out_finish;
-+ /* IP forwarded traffic has a physindev, locally
-+ * generated traffic hasn't.
-+ */
-+ if (realindev != NULL) {
-+ if (((nf_bridge->mask & BRNF_DONT_TAKE_PARENT) == 0) &&
-+ has_bridge_parent(realindev))
-+ realindev = bridge_parent(realindev);
-+
-+ NF_HOOK_THRESH(PF_INET, NF_IP_FORWARD, skb, realindev,
-+ bridge_parent(skb->dev), okfn,
-+ NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD + 1);
-+ } else {
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug ^= (1 << NF_IP_LOCAL_OUT);
-+#endif
-+
-+ NF_HOOK_THRESH(PF_INET, NF_IP_LOCAL_OUT, skb, realindev,
-+ bridge_parent(skb->dev), okfn,
-+ NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT + 1);
-+ }
-+ }
-+
-+ return NF_STOLEN;
-+}
-+
-+
-+/* PF_BRIDGE/POST_ROUTING ********************************************/
-+static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ struct sk_buff *skb = *pskb;
-+ struct nf_bridge_info *nf_bridge = (*pskb)->nf_bridge;
-+
-+ /* Be very paranoid. Must be a device driver bug. */
-+ if (skb->mac.raw < skb->head || skb->mac.raw + ETH_HLEN > skb->data) {
-+ printk(KERN_CRIT "br_netfilter: Argh!! br_nf_post_routing: "
-+ "bad mac.raw pointer.");
-+ if (skb->dev != NULL) {
-+ printk("[%s]", skb->dev->name);
-+ if (has_bridge_parent(skb->dev))
-+ printk("[%s]", bridge_parent(skb->dev)->name);
-+ }
-+ printk("\n");
-+ return NF_ACCEPT;
-+ }
-+
-+ if (skb->protocol != __constant_htons(ETH_P_IP))
-+ return NF_ACCEPT;
-+
-+ /* Sometimes we get packets with NULL ->dst here (for example,
-+ * running a dhcp client daemon triggers this).
-+ */
-+ if (skb->dst == NULL)
-+ return NF_ACCEPT;
-+
-+#ifdef CONFIG_NETFILTER_DEBUG
-+ skb->nf_debug ^= (1 << NF_IP_POST_ROUTING);
-+#endif
-+
-+ /* We assume any code from br_dev_queue_push_xmit onwards doesn't care
-+ * about the value of skb->pkt_type.
-+ */
-+ if (skb->pkt_type == PACKET_OTHERHOST) {
-+ skb->pkt_type = PACKET_HOST;
-+ nf_bridge->mask |= BRNF_PKT_TYPE;
-+ }
-+
-+ memcpy(nf_bridge->hh, skb->data - 16, 16);
-+
-+ NF_HOOK(PF_INET, NF_IP_POST_ROUTING, skb, NULL,
-+ bridge_parent(skb->dev), br_dev_queue_push_xmit);
-+
-+ return NF_STOLEN;
-+}
-+
-+
-+/* IPv4/SABOTAGE *****************************************************/
-+
-+/* Don't hand locally destined packets to PF_INET/PRE_ROUTING
-+ * for the second time.
-+ */
-+static unsigned int ipv4_sabotage_in(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ if (in->hard_start_xmit == br_dev_xmit &&
-+ okfn != br_nf_pre_routing_finish) {
-+ okfn(*pskb);
-+ return NF_STOLEN;
-+ }
-+
-+ return NF_ACCEPT;
-+}
-+
-+/* Postpone execution of PF_INET/FORWARD, PF_INET/LOCAL_OUT
-+ * and PF_INET/POST_ROUTING until we have done the forwarding
-+ * decision in the bridge code and have determined skb->physoutdev.
-+ */
-+static unsigned int ipv4_sabotage_out(unsigned int hook, struct sk_buff **pskb,
-+ const struct net_device *in, const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ if (out->hard_start_xmit == br_dev_xmit &&
-+ okfn != br_nf_forward_finish &&
-+ okfn != br_nf_local_out_finish &&
-+ okfn != br_dev_queue_push_xmit) {
-+ struct sk_buff *skb = *pskb;
-+ struct nf_bridge_info *nf_bridge;
-+
-+ if (!skb->nf_bridge && !nf_bridge_alloc(skb))
-+ return NF_DROP;
-+
-+ nf_bridge = skb->nf_bridge;
-+
-+ /* This frame will arrive on PF_BRIDGE/LOCAL_OUT and we
-+ * will need the indev then. For a brouter, the real indev
-+ * can be a bridge port, so we make sure br_nf_local_out()
-+ * doesn't use the bridge parent of the indev by using
-+ * the BRNF_DONT_TAKE_PARENT mask.
-+ */
-+ if (hook == NF_IP_FORWARD && nf_bridge->physindev == NULL) {
-+ nf_bridge->mask &= BRNF_DONT_TAKE_PARENT;
-+ nf_bridge->physindev = (struct net_device *)in;
-+ }
-+ okfn(skb);
-+ return NF_STOLEN;
-+ }
-+
-+ return NF_ACCEPT;
-+}
-+
-+/* For br_nf_local_out we need (prio = NF_BR_PRI_FIRST), to insure that innocent
-+ * PF_BRIDGE/NF_BR_LOCAL_OUT functions don't get bridged traffic as input.
-+ * For br_nf_post_routing, we need (prio = NF_BR_PRI_LAST), because
-+ * ip_refrag() can return NF_STOLEN.
-+ */
-+static struct nf_hook_ops br_nf_ops[] = {
-+ { .hook = br_nf_pre_routing,
-+ .pf = PF_BRIDGE,
-+ .hooknum = NF_BR_PRE_ROUTING,
-+ .priority = NF_BR_PRI_BRNF, },
-+ { .hook = br_nf_local_in,
-+ .pf = PF_BRIDGE,
-+ .hooknum = NF_BR_LOCAL_IN,
-+ .priority = NF_BR_PRI_BRNF, },
-+ { .hook = br_nf_forward,
-+ .pf = PF_BRIDGE,
-+ .hooknum = NF_BR_FORWARD,
-+ .priority = NF_BR_PRI_BRNF, },
-+ { .hook = br_nf_local_out,
-+ .pf = PF_BRIDGE,
-+ .hooknum = NF_BR_LOCAL_OUT,
-+ .priority = NF_BR_PRI_FIRST, },
-+ { .hook = br_nf_post_routing,
-+ .pf = PF_BRIDGE,
-+ .hooknum = NF_BR_POST_ROUTING,
-+ .priority = NF_BR_PRI_LAST, },
-+ { .hook = ipv4_sabotage_in,
-+ .pf = PF_INET,
-+ .hooknum = NF_IP_PRE_ROUTING,
-+ .priority = NF_IP_PRI_FIRST, },
-+ { .hook = ipv4_sabotage_out,
-+ .pf = PF_INET,
-+ .hooknum = NF_IP_FORWARD,
-+ .priority = NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD, },
-+ { .hook = ipv4_sabotage_out,
-+ .pf = PF_INET,
-+ .hooknum = NF_IP_LOCAL_OUT,
-+ .priority = NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT, },
-+ { .hook = ipv4_sabotage_out,
-+ .pf = PF_INET,
-+ .hooknum = NF_IP_POST_ROUTING,
-+ .priority = NF_IP_PRI_FIRST, },
-+};
-+
-+int br_netfilter_init(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(br_nf_ops); i++) {
-+ int ret;
-+
-+ if ((ret = nf_register_hook(&br_nf_ops[i])) >= 0)
-+ continue;
-+
-+ while (i--)
-+ nf_unregister_hook(&br_nf_ops[i]);
-+
-+ return ret;
-+ }
-+
-+ printk(KERN_NOTICE "Bridge firewalling registered\n");
-+
-+ return 0;
-+}
-+
-+void br_netfilter_fini(void)
-+{
-+ int i;
-+
-+ for (i = ARRAY_SIZE(br_nf_ops) - 1; i >= 0; i--)
-+ nf_unregister_hook(&br_nf_ops[i]);
-+}
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/net/ipv4/netfilter/ipt_physdev.c Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,127 @@
-+/* Kernel module to match the bridge port in and
-+ * out device for IP packets coming into contact with a bridge. */
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter_ipv4/ipt_physdev.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/netfilter_bridge.h>
-+#include <linux/netdevice.h>
-+#define MATCH 1
-+#define NOMATCH 0
-+
-+static int
-+match(const struct sk_buff *skb,
-+ const struct net_device *in,
-+ const struct net_device *out,
-+ const void *matchinfo,
-+ int offset,
-+ const void *hdr,
-+ u_int16_t datalen,
-+ int *hotdrop)
-+{
-+ int i;
-+ static const char nulldevname[IFNAMSIZ] = { 0 };
-+ const struct ipt_physdev_info *info = matchinfo;
-+ unsigned long ret;
-+ const char *indev, *outdev;
-+ struct nf_bridge_info *nf_bridge;
-+
-+ /* Not a bridged IP packet or no info available yet:
-+ * LOCAL_OUT/mangle and LOCAL_OUT/nat don't know if
-+ * the destination device will be a bridge. */
-+ if (!(nf_bridge = skb->nf_bridge)) {
-+ /* Return MATCH if the invert flags of the used options are on */
-+ if ((info->bitmask & IPT_PHYSDEV_OP_BRIDGED) &&
-+ !(info->invert & IPT_PHYSDEV_OP_BRIDGED))
-+ return NOMATCH;
-+ if ((info->bitmask & IPT_PHYSDEV_OP_ISIN) &&
-+ !(info->invert & IPT_PHYSDEV_OP_ISIN))
-+ return NOMATCH;
-+ if ((info->bitmask & IPT_PHYSDEV_OP_ISOUT) &&
-+ !(info->invert & IPT_PHYSDEV_OP_ISOUT))
-+ return NOMATCH;
-+ if ((info->bitmask & IPT_PHYSDEV_OP_IN) &&
-+ !(info->invert & IPT_PHYSDEV_OP_IN))
-+ return NOMATCH;
-+ if ((info->bitmask & IPT_PHYSDEV_OP_OUT) &&
-+ !(info->invert & IPT_PHYSDEV_OP_OUT))
-+ return NOMATCH;
-+ return MATCH;
-+ }
-+
-+ /* This only makes sense in the FORWARD and POSTROUTING chains */
-+ if ((info->bitmask & IPT_PHYSDEV_OP_BRIDGED) &&
-+ (!!(nf_bridge->mask & BRNF_BRIDGED) ^
-+ !(info->invert & IPT_PHYSDEV_OP_BRIDGED)))
-+ return NOMATCH;
-+
-+ if ((info->bitmask & IPT_PHYSDEV_OP_ISIN &&
-+ (!nf_bridge->physindev ^ !!(info->invert & IPT_PHYSDEV_OP_ISIN))) ||
-+ (info->bitmask & IPT_PHYSDEV_OP_ISOUT &&
-+ (!nf_bridge->physoutdev ^ !!(info->invert & IPT_PHYSDEV_OP_ISOUT))))
-+ return NOMATCH;
-+
-+ if (!(info->bitmask & IPT_PHYSDEV_OP_IN))
-+ goto match_outdev;
-+ indev = nf_bridge->physindev ? nf_bridge->physindev->name : nulldevname;
-+ for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
-+ ret |= (((const unsigned long *)indev)[i]
-+ ^ ((const unsigned long *)info->physindev)[i])
-+ & ((const unsigned long *)info->in_mask)[i];
-+ }
-+
-+ if ((ret == 0) ^ !(info->invert & IPT_PHYSDEV_OP_IN))
-+ return NOMATCH;
-+
-+match_outdev:
-+ if (!(info->bitmask & IPT_PHYSDEV_OP_OUT))
-+ return MATCH;
-+ outdev = nf_bridge->physoutdev ?
-+ nf_bridge->physoutdev->name : nulldevname;
-+ for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
-+ ret |= (((const unsigned long *)outdev)[i]
-+ ^ ((const unsigned long *)info->physoutdev)[i])
-+ & ((const unsigned long *)info->out_mask)[i];
-+ }
-+
-+ return (ret != 0) ^ !(info->invert & IPT_PHYSDEV_OP_OUT);
-+}
-+
-+static int
-+checkentry(const char *tablename,
-+ const struct ipt_ip *ip,
-+ void *matchinfo,
-+ unsigned int matchsize,
-+ unsigned int hook_mask)
-+{
-+ const struct ipt_physdev_info *info = matchinfo;
-+
-+ if (matchsize != IPT_ALIGN(sizeof(struct ipt_physdev_info)))
-+ return 0;
-+ if (!(info->bitmask & IPT_PHYSDEV_OP_MASK) ||
-+ info->bitmask & ~IPT_PHYSDEV_OP_MASK)
-+ return 0;
-+ return 1;
-+}
-+
-+static struct ipt_match physdev_match = {
-+ .name = "physdev",
-+ .match = &match,
-+ .checkentry = &checkentry,
-+ .me = THIS_MODULE,
-+};
-+
-+static int __init init(void)
-+{
-+ return ipt_register_match(&physdev_match);
-+}
-+
-+static void __exit fini(void)
-+{
-+ ipt_unregister_match(&physdev_match);
-+}
-+
-+module_init(init);
-+module_exit(fini);
-+MODULE_LICENSE("GPL");
-+EXPORT_NO_SYMBOLS;
---- /dev/null Thu Aug 24 11:00:32 2000
-+++ linux-2.4.21-ebt-brnf-3/include/linux/netfilter_ipv4/ipt_physdev.h Fri Aug 8 01:09:06 2003
-@@ -0,0 +1,24 @@
-+#ifndef _IPT_PHYSDEV_H
-+#define _IPT_PHYSDEV_H
-+
-+#ifdef __KERNEL__
-+#include <linux/if.h>
-+#endif
-+
-+#define IPT_PHYSDEV_OP_IN 0x01
-+#define IPT_PHYSDEV_OP_OUT 0x02
-+#define IPT_PHYSDEV_OP_BRIDGED 0x04
-+#define IPT_PHYSDEV_OP_ISIN 0x08
-+#define IPT_PHYSDEV_OP_ISOUT 0x10
-+#define IPT_PHYSDEV_OP_MASK (0x20 - 1)
-+
-+struct ipt_physdev_info {
-+ u_int8_t invert;
-+ u_int8_t bitmask;
-+ char physindev[IFNAMSIZ];
-+ char in_mask[IFNAMSIZ];
-+ char physoutdev[IFNAMSIZ];
-+ char out_mask[IFNAMSIZ];
-+};
-+
-+#endif /*_IPT_PHYSDEV_H*/
+++ /dev/null
-diff -ruN linux-2.4.21.orig/drivers/net/Config.in linux-2.4.21/drivers/net/Config.in
---- linux-2.4.21.orig/drivers/net/Config.in 2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.21/drivers/net/Config.in 2003-07-08 07:27:10.000000000 +0200
-@@ -301,6 +301,7 @@
- dep_tristate ' PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
- dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
- dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP $CONFIG_PPP
-+ dep_tristate ' Microsoft PPP compression/encryption (MPPC/MPPE)' CONFIG_PPP_MPPE $CONFIG_PPP
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
- fi
-diff -ruN linux-2.4.21.orig/drivers/net/Makefile linux-2.4.21/drivers/net/Makefile
---- linux-2.4.21.orig/drivers/net/Makefile 2003-06-13 16:51:34.000000000 +0200
-+++ linux-2.4.21/drivers/net/Makefile 2003-07-14 23:53:15.000000000 +0200
-@@ -18,8 +18,9 @@
- export-objs := 8390.o arlan.o aironet4500_core.o aironet4500_card.o \
- ppp_async.o ppp_generic.o slhc.o pppox.o auto_irq.o \
- net_init.o mii.o
--list-multi := rcpci.o
-+list-multi := rcpci.o ppp_mppe_mppc.o
- rcpci-objs := rcpci45.o rclanmtl.o
-+ppp_mppe_c-objs := ppp_mppe_mppc_comp.o ppp_mppe_crypto.o
-
- ifeq ($(CONFIG_TULIP),y)
- obj-y += tulip/tulip.o
-@@ -149,6 +150,15 @@
- obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
- obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
- obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-+
-+ifeq ($(CONFIG_PPP_MPPE),y)
-+ obj-y += $(ppp_mppe_c-objs)
-+else
-+ ifeq ($(CONFIG_PPP_MPPE),m)
-+ obj-m += ppp_mppe_mppc.o
-+ endif
-+endif
-+
- obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-
- obj-$(CONFIG_SLIP) += slip.o
-@@ -258,3 +268,5 @@
- rcpci.o: $(rcpci-objs)
- $(LD) -r -o $@ $(rcpci-objs)
-
-+ppp_mppe_mppc.o: $(ppp_mppe_c-objs)
-+ $(LD) -r -o $@ $(ppp_mppe_c-objs)
-diff -ruN linux-2.4.21.orig/drivers/net/ppp_generic.c linux-2.4.21/drivers/net/ppp_generic.c
---- linux-2.4.21.orig/drivers/net/ppp_generic.c 2003-06-13 16:51:35.000000000 +0200
-+++ linux-2.4.21/drivers/net/ppp_generic.c 2003-07-12 04:39:03.000000000 +0200
-@@ -19,7 +19,7 @@
- * PPP driver, written by Michael Callahan and Al Longyear, and
- * subsequently hacked by Paul Mackerras.
- *
-- * ==FILEVERSION 20020217==
-+ * ==FILEVERSION 20030706==
- */
-
- #include <linux/config.h>
-@@ -102,6 +102,7 @@
- spinlock_t rlock; /* lock for receive side 58 */
- spinlock_t wlock; /* lock for transmit side 5c */
- int mru; /* max receive unit 60 */
-+ int mru_alloc; /* MAX(1500,MRU) for dev_alloc_skb() */
- unsigned int flags; /* control bits 64 */
- unsigned int xstate; /* transmit state bits 68 */
- unsigned int rstate; /* receive state bits 6c */
-@@ -129,6 +130,7 @@
- struct sock_fprog pass_filter; /* filter for packets to pass */
- struct sock_fprog active_filter;/* filter for pkts to reset idle */
- #endif /* CONFIG_PPP_FILTER */
-+ int xpad; /* ECP or CCP (MPPE) transmit padding */
- };
-
- /*
-@@ -552,7 +554,9 @@
- case PPPIOCSMRU:
- if (get_user(val, (int *) arg))
- break;
-- ppp->mru = val;
-+ ppp->mru_alloc = ppp->mru = val;
-+ if (ppp->mru_alloc < PPP_MRU)
-+ ppp->mru_alloc = PPP_MRU; /* increase for broken peers */
- err = 0;
- break;
-
-@@ -1023,14 +1027,35 @@
- case PPP_CCP:
- /* peek at outbound CCP frames */
- ppp_ccp_peek(ppp, skb, 0);
-+ /*
-+ * When LZS or MPPE/MPPC is negotiated we don't send
-+ * CCP_RESETACK after receiving CCP_RESETREQ; in fact pppd
-+ * sends such a packet but we silently discard it here
-+ */
-+ if (CCP_CODE(skb->data+2) == CCP_RESETACK
-+ && (ppp->xcomp->compress_proto == CI_MPPE
-+ || ppp->xcomp->compress_proto == CI_LZS)) {
-+ --ppp->stats.tx_packets;
-+ ppp->stats.tx_bytes -= skb->len - 2;
-+ kfree_skb(skb);
-+ return;
-+ }
- break;
- }
-
- /* try to do packet compression */
- if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state != 0
- && proto != PPP_LCP && proto != PPP_CCP) {
-- new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len,
-- GFP_ATOMIC);
-+ int comp_ovhd = 0;
-+ /* because of possible data expansion when MPPC or LZS
-+ is used, allocate compressor's buffer about 12.5% bigger
-+ than MTU */
-+ if (ppp->xcomp->compress_proto == CI_MPPE)
-+ comp_ovhd = (((ppp->dev->mtu * 9) / 8) + 1);
-+ else if (ppp->xcomp->compress_proto == CI_LZS)
-+ comp_ovhd = (((ppp->dev->mtu * 9) / 8) + 1) + LZS_OVHD;
-+ new_skb = alloc_skb(ppp->dev->mtu + ppp->dev->hard_header_len
-+ + ppp->xpad + comp_ovhd, GFP_ATOMIC);
- if (new_skb == 0) {
- printk(KERN_ERR "PPP: no memory (comp pkt)\n");
- goto drop;
-@@ -1042,15 +1067,28 @@
- /* compressor still expects A/C bytes in hdr */
- len = ppp->xcomp->compress(ppp->xc_state, skb->data - 2,
- new_skb->data, skb->len + 2,
-- ppp->dev->mtu + PPP_HDRLEN);
-+ ppp->dev->mtu + ppp->xpad
-+ + PPP_HDRLEN);
- if (len > 0 && (ppp->flags & SC_CCP_UP)) {
- kfree_skb(skb);
- skb = new_skb;
- skb_put(skb, len);
- skb_pull(skb, 2); /* pull off A/C bytes */
-- } else {
-+ } else if (len == 0) {
- /* didn't compress, or CCP not up yet */
- kfree_skb(new_skb);
-+ } else {
-+ /*
-+ * (len < 0)
-+ * MPPE requires that we do not send unencrypted
-+ * frames. The compressor will return -1 if we
-+ * should drop the frame. We cannot simply test
-+ * the compress_proto because MPPE and MPPC share
-+ * the same number.
-+ */
-+ printk(KERN_ERR "ppp: compressor dropped pkt\n");
-+ kfree_skb(new_skb);
-+ goto drop;
- }
- }
-
-@@ -1538,14 +1576,15 @@
- int len;
-
- if (proto == PPP_COMP) {
-- ns = dev_alloc_skb(ppp->mru + PPP_HDRLEN);
-+ ns = dev_alloc_skb(ppp->mru_alloc + PPP_HDRLEN);
- if (ns == 0) {
- printk(KERN_ERR "ppp_decompress_frame: no memory\n");
- goto err;
- }
- /* the decompressor still expects the A/C bytes in the hdr */
- len = ppp->rcomp->decompress(ppp->rc_state, skb->data - 2,
-- skb->len + 2, ns->data, ppp->mru + PPP_HDRLEN);
-+ skb->len + 2, ns->data,
-+ ppp->mru_alloc + PPP_HDRLEN);
- if (len < 0) {
- /* Pass the compressed frame to pppd as an
- error indication. */
-@@ -1571,7 +1610,12 @@
- return skb;
-
- err:
-- ppp->rstate |= SC_DC_ERROR;
-+ if (ppp->rcomp->compress_proto != CI_MPPE
-+ && ppp->rcomp->compress_proto != CI_LZS) {
-+ /* If decompression protocol isn't MPPE/MPPC or LZS, we set
-+ SC_DC_ERROR flag and wait for CCP_RESETACK */
-+ ppp->rstate |= SC_DC_ERROR;
-+ }
- ppp_receive_error(ppp);
- return skb;
- }
-@@ -1980,6 +2024,20 @@
- ocomp->comp_free(ostate);
- err = 0;
- }
-+ if (ccp_option[0] == CI_MPPE)
-+ /*
-+ * pppd (userland) has reduced the MTU by MPPE_PAD,
-+ * to accomodate "compressor" growth. We must
-+ * increase the space allocated for compressor
-+ * output in ppp_send_frame() accordingly. Note
-+ * that from a purist's view, it may be more correct
-+ * to require multilink and fragment large packets,
-+ * but that seems inefficient compared to this
-+ * little trick.
-+ */
-+ ppp->xpad = MPPE_PAD;
-+ else
-+ ppp->xpad = 0;
-
- } else {
- state = cp->decomp_alloc(ccp_option, data.length);
-@@ -2251,6 +2309,7 @@
- /* Initialize the new ppp unit */
- ppp->file.index = unit;
- ppp->mru = PPP_MRU;
-+ ppp->mru_alloc = PPP_MRU;
- init_ppp_file(&ppp->file, INTERFACE);
- ppp->file.hdrlen = PPP_HDRLEN - 2; /* don't count proto bytes */
- for (i = 0; i < NUM_NP; ++i)
-diff -ruN linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.c linux-2.4.21/drivers/net/ppp_mppe_crypto.c
---- linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.21/drivers/net/ppp_mppe_crypto.c 2003-07-08 19:07:18.000000000 +0200
-@@ -0,0 +1,257 @@
-+/*
-+ * ppp_mppe_crypto.c - cryptografic funtions for MPPE
-+ *
-+ * This code is Public Domain. Please see comments below.
-+ *
-+ * I have just put SHA1 and ARCFOUR implementations into one file
-+ * in order to not pollute kernel namespace.
-+ *
-+ * Jan Dubiec <jdx@slackware.pl>, 2003-07-08
-+ */
-+
-+/*
-+ * ftp://ftp.funet.fi/pub/crypt/hash/sha/sha1.c
-+ *
-+ * SHA-1 in C
-+ * By Steve Reid <steve@edmweb.com>
-+ * 100% Public Domain
-+ *
-+ * Test Vectors (from FIPS PUB 180-1)
-+ * "abc"
-+ * A9993E36 4706816A BA3E2571 7850C26C 9CD0D89D
-+ * "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq"
-+ * 84983E44 1C3BD26E BAAE4AA1 F95129E5 E54670F1
-+ * A million repetitions of "a"
-+ * 34AA973C D4C4DAA4 F61EEB2B DBAD2731 6534016F
-+ */
-+
-+/* #define SHA1HANDSOFF * Copies data before messing with it. */
-+
-+#if defined(__linux__)
-+#include <asm/byteorder.h>
-+#include <linux/string.h>
-+#elif defined(__solaris__)
-+#include <sys/isa_defs.h>
-+#include <sys/ddi.h>
-+#include <sys/sunddi.h>
-+#define memcpy(d, s, c) bcopy(s, d, c)
-+#define memset(d, b, c) bzero(d, c)
-+#endif
-+
-+#include "ppp_mppe_crypto.h"
-+
-+static void SHA1_Transform(unsigned long[5], const unsigned char[64]);
-+
-+#define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits))))
-+
-+/* blk0() and blk() perform the initial expand. */
-+/* I got the idea of expanding during the round function from SSLeay */
-+#if defined(__LITTLE_ENDIAN) || defined(_LITTLE_ENDIAN)
-+#define blk0(i) (block->l[i] = (rol(block->l[i],24)&0xFF00FF00) \
-+ |(rol(block->l[i],8)&0x00FF00FF))
-+#elif defined(__BIG_ENDIAN) || defined(_BIG_ENDIAN)
-+#define blk0(i) block->l[i]
-+#else
-+#error Endianness not defined
-+#endif
-+#define blk(i) (block->l[i&15] = rol(block->l[(i+13)&15]^block->l[(i+8)&15] \
-+ ^block->l[(i+2)&15]^block->l[i&15],1))
-+
-+/* (R0+R1), R2, R3, R4 are the different operations used in SHA1 */
-+#define R0(v,w,x,y,z,i) z+=((w&(x^y))^y)+blk0(i)+0x5A827999+rol(v,5);w=rol(w,30);
-+#define R1(v,w,x,y,z,i) z+=((w&(x^y))^y)+blk(i)+0x5A827999+rol(v,5);w=rol(w,30);
-+#define R2(v,w,x,y,z,i) z+=(w^x^y)+blk(i)+0x6ED9EBA1+rol(v,5);w=rol(w,30);
-+#define R3(v,w,x,y,z,i) z+=(((w|x)&y)|(w&x))+blk(i)+0x8F1BBCDC+rol(v,5);w=rol(w,30);
-+#define R4(v,w,x,y,z,i) z+=(w^x^y)+blk(i)+0xCA62C1D6+rol(v,5);w=rol(w,30);
-+
-+/* Hash a single 512-bit block. This is the core of the algorithm. */
-+static void
-+SHA1_Transform(unsigned long state[5], const unsigned char buffer[64])
-+{
-+ unsigned long a, b, c, d, e;
-+ typedef union {
-+ unsigned char c[64];
-+ unsigned long l[16];
-+ } CHAR64LONG16;
-+ CHAR64LONG16 *block;
-+
-+#ifdef SHA1HANDSOFF
-+ static unsigned char workspace[64];
-+ block = (CHAR64LONG16 *) workspace;
-+ memcpy(block, buffer, 64);
-+#else
-+ block = (CHAR64LONG16 *) buffer;
-+#endif
-+ /* Copy context->state[] to working vars */
-+ a = state[0];
-+ b = state[1];
-+ c = state[2];
-+ d = state[3];
-+ e = state[4];
-+ /* 4 rounds of 20 operations each. Loop unrolled. */
-+ R0(a,b,c,d,e, 0); R0(e,a,b,c,d, 1); R0(d,e,a,b,c, 2); R0(c,d,e,a,b, 3);
-+ R0(b,c,d,e,a, 4); R0(a,b,c,d,e, 5); R0(e,a,b,c,d, 6); R0(d,e,a,b,c, 7);
-+ R0(c,d,e,a,b, 8); R0(b,c,d,e,a, 9); R0(a,b,c,d,e,10); R0(e,a,b,c,d,11);
-+ R0(d,e,a,b,c,12); R0(c,d,e,a,b,13); R0(b,c,d,e,a,14); R0(a,b,c,d,e,15);
-+ R1(e,a,b,c,d,16); R1(d,e,a,b,c,17); R1(c,d,e,a,b,18); R1(b,c,d,e,a,19);
-+ R2(a,b,c,d,e,20); R2(e,a,b,c,d,21); R2(d,e,a,b,c,22); R2(c,d,e,a,b,23);
-+ R2(b,c,d,e,a,24); R2(a,b,c,d,e,25); R2(e,a,b,c,d,26); R2(d,e,a,b,c,27);
-+ R2(c,d,e,a,b,28); R2(b,c,d,e,a,29); R2(a,b,c,d,e,30); R2(e,a,b,c,d,31);
-+ R2(d,e,a,b,c,32); R2(c,d,e,a,b,33); R2(b,c,d,e,a,34); R2(a,b,c,d,e,35);
-+ R2(e,a,b,c,d,36); R2(d,e,a,b,c,37); R2(c,d,e,a,b,38); R2(b,c,d,e,a,39);
-+ R3(a,b,c,d,e,40); R3(e,a,b,c,d,41); R3(d,e,a,b,c,42); R3(c,d,e,a,b,43);
-+ R3(b,c,d,e,a,44); R3(a,b,c,d,e,45); R3(e,a,b,c,d,46); R3(d,e,a,b,c,47);
-+ R3(c,d,e,a,b,48); R3(b,c,d,e,a,49); R3(a,b,c,d,e,50); R3(e,a,b,c,d,51);
-+ R3(d,e,a,b,c,52); R3(c,d,e,a,b,53); R3(b,c,d,e,a,54); R3(a,b,c,d,e,55);
-+ R3(e,a,b,c,d,56); R3(d,e,a,b,c,57); R3(c,d,e,a,b,58); R3(b,c,d,e,a,59);
-+ R4(a,b,c,d,e,60); R4(e,a,b,c,d,61); R4(d,e,a,b,c,62); R4(c,d,e,a,b,63);
-+ R4(b,c,d,e,a,64); R4(a,b,c,d,e,65); R4(e,a,b,c,d,66); R4(d,e,a,b,c,67);
-+ R4(c,d,e,a,b,68); R4(b,c,d,e,a,69); R4(a,b,c,d,e,70); R4(e,a,b,c,d,71);
-+ R4(d,e,a,b,c,72); R4(c,d,e,a,b,73); R4(b,c,d,e,a,74); R4(a,b,c,d,e,75);
-+ R4(e,a,b,c,d,76); R4(d,e,a,b,c,77); R4(c,d,e,a,b,78); R4(b,c,d,e,a,79);
-+ /* Add the working vars back into context.state[] */
-+ state[0] += a;
-+ state[1] += b;
-+ state[2] += c;
-+ state[3] += d;
-+ state[4] += e;
-+ /* Wipe variables */
-+ a = b = c = d = e = 0;
-+}
-+
-+/* SHA1Init - Initialize new context */
-+void
-+SHA1_Init(SHA1_CTX *context)
-+{
-+ /* SHA1 initialization constants */
-+ context->state[0] = 0x67452301;
-+ context->state[1] = 0xEFCDAB89;
-+ context->state[2] = 0x98BADCFE;
-+ context->state[3] = 0x10325476;
-+ context->state[4] = 0xC3D2E1F0;
-+ context->count[0] = context->count[1] = 0;
-+}
-+
-+/* Run your data through this. */
-+void
-+SHA1_Update(SHA1_CTX *context, const unsigned char *data, unsigned int len)
-+{
-+ unsigned int i, j;
-+
-+ j = (context->count[0] >> 3) & 63;
-+ if ((context->count[0] += len << 3) < (len << 3)) context->count[1]++;
-+ context->count[1] += (len >> 29);
-+ if ((j + len) > 63) {
-+ memcpy(&context->buffer[j], data, (i = 64-j));
-+ SHA1_Transform(context->state, context->buffer);
-+ for ( ; i + 63 < len; i += 64) {
-+ SHA1_Transform(context->state, &data[i]);
-+ }
-+ j = 0;
-+ }
-+ else
-+ i = 0;
-+
-+ memcpy(&context->buffer[j], &data[i], len - i);
-+}
-+
-+/* Add padding and return the message digest. */
-+void
-+SHA1_Final(unsigned char digest[20], SHA1_CTX *context)
-+{
-+ unsigned long i, j;
-+ unsigned char finalcount[8];
-+
-+ for (i = 0; i < 8; i++) {
-+ finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)]
-+ >> ((3-(i & 3)) * 8) ) & 255); /* Endian independent */
-+ }
-+ SHA1_Update(context, (unsigned char *) "\200", 1);
-+ while ((context->count[0] & 504) != 448) {
-+ SHA1_Update(context, (unsigned char *) "\0", 1);
-+ }
-+ SHA1_Update(context, finalcount, 8); /* Should cause a SHA1Transform() */
-+ for (i = 0; i < 20; i++) {
-+ digest[i] = (unsigned char)
-+ ((context->state[i>>2] >> ((3-(i & 3)) * 8) ) & 255);
-+ }
-+ /* Wipe variables */
-+ i = j = 0;
-+ memset(context->buffer, 0, 64);
-+ memset(context->state, 0, 20);
-+ memset(context->count, 0, 8);
-+ memset(&finalcount, 0, 8);
-+#ifdef SHA1HANDSOFF /* make SHA1Transform overwrite it's own static vars */
-+ SHA1Transform(context->state, context->buffer);
-+#endif
-+}
-+
-+/*
-+ * arcfour.c
-+ * by Frank Cusack <frank@google.com>
-+ * 100% public domain
-+ *
-+ * Implemented from the description in _Applied Cryptography_, 2nd ed.
-+ *
-+ * ** Distribution ** of this software is unlimited and unrestricted.
-+ *
-+ * ** Use ** of this software is almost certainly legal; however, refer
-+ * to <http://theory.lcs.mit.edu/~rivest/faq.html>.
-+ */
-+
-+#define swap(a, b) \
-+{ \
-+ unsigned char t = b; \
-+ b = a; \
-+ a = t; \
-+}
-+
-+/*
-+ * Initialize arcfour from a key.
-+ */
-+void
-+arcfour_setkey(arcfour_context *context, const unsigned char *key,
-+ unsigned keylen)
-+{
-+ unsigned i, j;
-+ unsigned char K[256];
-+
-+ context->i = context->j = 0;
-+
-+ for (i = 0; i < 256; i++) {
-+ context->S[i] = i;
-+ K[i] = key[i % keylen];
-+ }
-+
-+ j = 0;
-+ for (i = 0; i < 256; i++) {
-+ j = (j + context->S[i] + K[i]) % 256;
-+ swap(context->S[i], context->S[j]);
-+ }
-+
-+ memset(K, 0, sizeof(K));
-+}
-+
-+/*
-+ * plaintext -> ciphertext (or vice versa)
-+ */
-+void
-+arcfour_encrypt(arcfour_context *context, const unsigned char *in, unsigned len,
-+ unsigned char *out)
-+{
-+ unsigned i = context->i;
-+ unsigned j = context->j;
-+ unsigned char *S = context->S;
-+ unsigned char K;
-+
-+ while (len--) {
-+ i = (i + 1) % 256;
-+ j = (j + S[i]) % 256;
-+ swap(S[i], S[j]);
-+ K = S[(S[i] + S[j]) % 256];
-+ *out++ = *in++ ^ K;
-+ }
-+
-+ context->i = i;
-+ context->j = j;
-+}
-diff -ruN linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.h linux-2.4.21/drivers/net/ppp_mppe_crypto.h
---- linux-2.4.21.orig/drivers/net/ppp_mppe_crypto.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.21/drivers/net/ppp_mppe_crypto.h 2003-07-08 19:07:25.000000000 +0200
-@@ -0,0 +1,40 @@
-+/*
-+ * ppp_mppe_crypto.h - cryptografic funtion prototypes for MPPE
-+ *
-+ * This code is Public Domain. Please see comments below.
-+ *
-+ * I have just put SHA1 and ARCFOUR declarations into one file
-+ * in order to not pollute kernel namespace.
-+ *
-+ * Jan Dubiec <jdx@slackware.pl>, 2003-07-08
-+ */
-+
-+#ifndef _PPP_MPPE_CRYPTO_
-+#define _PPP_MPPE_CRYPTO_
-+
-+/* SHA1 definitions and prototypes */
-+typedef struct {
-+ unsigned long state[5];
-+ unsigned long count[2];
-+ unsigned char buffer[64];
-+} SHA1_CTX;
-+
-+#define SHA1_SIGNATURE_SIZE 20
-+
-+extern void SHA1_Init(SHA1_CTX *);
-+extern void SHA1_Update(SHA1_CTX *, const unsigned char *, unsigned int);
-+extern void SHA1_Final(unsigned char[SHA1_SIGNATURE_SIZE], SHA1_CTX *);
-+
-+/* ARCFOUR (aka RC4) definitions and prototypes */
-+typedef struct {
-+ unsigned i;
-+ unsigned j;
-+ unsigned char S[256];
-+} arcfour_context;
-+
-+extern void arcfour_setkey(arcfour_context *, const unsigned char *, unsigned);
-+extern void arcfour_encrypt(arcfour_context *, const unsigned char *, unsigned,
-+ unsigned char *);
-+#define arcfour_decrypt arcfour_encrypt
-+
-+#endif /* _PPP_MPPE_CRYPTO_ */
-diff -ruN linux-2.4.21.orig/drivers/net/ppp_mppe_mppc_comp.c linux-2.4.21/drivers/net/ppp_mppe_mppc_comp.c
---- linux-2.4.21.orig/drivers/net/ppp_mppe_mppc_comp.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.21/drivers/net/ppp_mppe_mppc_comp.c 2003-08-07 22:36:59.000000000 +0200
-@@ -0,0 +1,1144 @@
-+/*
-+ * ppp_mppe_mppc_comp.c - MPPC/MPPE "compressor/decompressor" module.
-+ *
-+ * Copyright (c) 1994 Árpád Magosányi <mag@bunuel.tii.matav.hu>
-+ * Copyright (c) 1999 Tim Hockin, Cobalt Networks Inc. <thockin@cobaltnet.com>
-+ * Copyright (c) 2002, 2003 Jan Dubiec <jdx@slackware.pl>
-+ *
-+ * Permission to use, copy, modify, and distribute this software and its
-+ * documentation is hereby granted, provided that the above copyright
-+ * notice appears in all copies. This software is provided without any
-+ * warranty, express or implied.
-+ *
-+ * The code is based on MPPE kernel module written by Árpád Magosányi and
-+ * Tim Hockin which can be found on http://planetmirror.com/pub/mppe/.
-+ * I have added MPPC and 56 bit session keys support in MPPE.
-+ *
-+ * WARNING! Although this is open source code, its usage in some countries
-+ * (in particular in the USA) may violate Stac Inc. patent for MPPC.
-+ *
-+ * Compile command:
-+ * gcc -O2 -Wall -I/usr/src/linux/include -D__KERNEL__ -DMODULE -c ppp_mppe_mppc_comp.c
-+ *
-+ * ==FILEVERSION 20030807==
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/init.h>
-+
-+#include <linux/ppp_defs.h>
-+#include <linux/ppp-comp.h>
-+
-+#include "ppp_mppe_crypto.h"
-+
-+/*
-+ * State for a mppc/mppe "(de)compressor".
-+ */
-+struct ppp_mppe_state {
-+ arcfour_context arcfour_context;
-+ u8 master_key[MPPE_MAX_KEY_LEN];
-+ u8 session_key[MPPE_MAX_KEY_LEN];
-+ u8 mppc; /* do we use compression (MPPC)? */
-+ u8 mppe; /* do we use encryption (MPPE)? */
-+ u8 keylen; /* key length in bytes */
-+ u8 bitkeylen; /* key length in bits */
-+ u16 ccount; /* coherency counter */
-+ u16 bits; /* MPPC/MPPE control bits */
-+ u8 stateless; /* do we use stateless mode? */
-+ u8 nextflushed; /* set A bit in the next outgoing packet;
-+ used only by compressor*/
-+ u8 flushexpected; /* drop packets until A bit is received;
-+ used only by decompressor*/
-+ u8 *hist; /* MPPC history */
-+ u16 *hash; /* Hash table; used only by compressor */
-+ u16 histptr; /* history "cursor" */
-+ int unit;
-+ int debug;
-+ int mru;
-+ struct compstat stats;
-+};
-+
-+#define MPPE_OVHD 2 /* MPPE overhead */
-+#define MPPE_HIST_LEN 8192 /* MPPC history size */
-+#define MPPE_MAX_CCOUNT 0x0FFF /* max. coherency counter value */
-+
-+#define MPPE_BIT_FLUSHED 0x80 /* bit A */
-+#define MPPE_BIT_RESET 0x40 /* bit B */
-+#define MPPE_BIT_COMP 0x20 /* bit C */
-+#define MPPE_BIT_ENCRYPTED 0x10 /* bit D */
-+
-+#define MPPE_SALT0 0xD1 /* values used in MPPE key derivation */
-+#define MPPE_SALT1 0x26 /* according to RFC3079 */
-+#define MPPE_SALT2 0x9E
-+
-+#define MPPE_CCOUNT(x) ((((x)[4] & 0x0f) << 8) + (x)[5])
-+#define MPPE_BITS(x) ((x)[4] & 0xf0)
-+#define MPPE_CTRLHI(x) ((((x)->ccount & 0xf00)>>8)|((x)->bits))
-+#define MPPE_CTRLLO(x) ((x)->ccount & 0xff)
-+
-+/*
-+ * Key Derivation, from RFC 3078, RFC 3079.
-+ * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079.
-+ */
-+static void
-+GetNewKeyFromSHA(unsigned char *MasterKey, unsigned char *SessionKey,
-+ unsigned long SessionKeyLength, unsigned char *InterimKey)
-+{
-+ /*Pads used in key derivation */
-+ static unsigned char SHAPad1[40] =
-+ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-+
-+ static unsigned char SHAPad2[40] =
-+ { 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
-+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
-+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2,
-+ 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2 };
-+
-+ SHA1_CTX Context;
-+ unsigned char Digest[SHA1_SIGNATURE_SIZE];
-+
-+ SHA1_Init(&Context);
-+ SHA1_Update(&Context, MasterKey, SessionKeyLength);
-+ SHA1_Update(&Context, SHAPad1, sizeof(SHAPad1));
-+ SHA1_Update(&Context, SessionKey, SessionKeyLength);
-+ SHA1_Update(&Context, SHAPad2, sizeof(SHAPad2));
-+ SHA1_Final(Digest,&Context);
-+ memcpy(InterimKey, Digest, SessionKeyLength);
-+}
-+
-+static void
-+mppe_change_key(struct ppp_mppe_state *state, int initialize)
-+{
-+ unsigned char InterimKey[MPPE_MAX_KEY_LEN];
-+
-+ GetNewKeyFromSHA(state->master_key, state->session_key,
-+ state->keylen, InterimKey);
-+ if (initialize) {
-+ memcpy(state->session_key, InterimKey, state->keylen);
-+ } else {
-+ arcfour_setkey(&state->arcfour_context, InterimKey, state->keylen);
-+ arcfour_encrypt(&state->arcfour_context, InterimKey, state->keylen,
-+ state->session_key);
-+ }
-+ if (state->keylen == 8) {
-+ if (state->bitkeylen == 40) {
-+ state->session_key[0] = MPPE_SALT0;
-+ state->session_key[1] = MPPE_SALT1;
-+ state->session_key[2] = MPPE_SALT2;
-+ } else {
-+ state->session_key[0] = MPPE_SALT0;
-+ }
-+ }
-+ arcfour_setkey(&state->arcfour_context, state->session_key, state->keylen);
-+}
-+
-+/* increase 12-bit coherency counter */
-+static inline void
-+mppe_increase_ccount(struct ppp_mppe_state *state)
-+{
-+ state->ccount = (state->ccount + 1) & MPPE_MAX_CCOUNT;
-+ if (state->mppe) {
-+ if (state->stateless) {
-+ mppe_change_key(state, 0);
-+ state->nextflushed = 1;
-+ } else {
-+ if ((state->ccount & 0xff) == 0xff) {
-+ mppe_change_key(state, 0);
-+ state->nextflushed = 1;
-+ }
-+ }
-+ }
-+}
-+
-+/* allocate space for a MPPE/MPPC (de)compressor. */
-+/* comp != 0 -> init compressor */
-+/* comp = 0 -> init decompressor */
-+static void *
-+mppe_alloc(unsigned char *options, int opt_len, int comp)
-+{
-+ struct ppp_mppe_state *state;
-+ u8* fname;
-+
-+ fname = comp ? "mppe_comp_alloc" : "mppe_decomp_alloc";
-+
-+ /*
-+ Hack warning - additionally to the standard MPPC/MPPE configuration
-+ options, pppd passes to the (de)copressor 8 or 16 byte session key.
-+ Therefore options[1] contains MPPC/MPPE configuration option length
-+ (CILEN_MPPE = 6), but the real options length, depending on the key
-+ length, is 6+8 or 6+16.
-+ */
-+ if (opt_len < CILEN_MPPE) {
-+ printk(KERN_WARNING "%s: wrong options length: %u\n", fname, opt_len);
-+ return NULL;
-+ }
-+
-+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+ (options[2] & ~MPPE_STATELESS) != 0 ||
-+ options[3] != 0 || options[4] != 0 ||
-+ (options[5] & ~(MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+ (options[5] & (MPPE_128BIT|MPPE_56BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname, options[0],
-+ options[1], options[2], options[3], options[4], options[5]);
-+ return NULL;
-+ }
-+
-+ state = (struct ppp_mppe_state *)kmalloc(sizeof(*state), GFP_KERNEL);
-+ if (state == NULL) {
-+ printk(KERN_ERR "%s: cannot allocate space for %scompressor\n", fname,
-+ comp ? "" : "de");
-+ return NULL;
-+ }
-+ memset(state, 0, sizeof(struct ppp_mppe_state));
-+
-+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */
-+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+ MPPE_40BIT); /* Do we use MPPE? */
-+
-+ if (state->mppc) {
-+ /* allocate MPPC history */
-+ state->hist = (u8*)vmalloc(2*MPPE_HIST_LEN*sizeof(u8));
-+ if (state->hist == NULL) {
-+ kfree(state);
-+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+ fname);
-+ return NULL;
-+ }
-+
-+ /* allocate hashtable for MPPC compressor */
-+ if (comp) {
-+ state->hash = (u16*)vmalloc(MPPE_HIST_LEN*sizeof(u16));
-+ if (state->hash == NULL) {
-+ vfree(state->hist);
-+ kfree(state);
-+ printk(KERN_ERR "%s: cannot allocate space for MPPC history\n",
-+ fname);
-+ return NULL;
-+ }
-+ }
-+ }
-+
-+ MOD_INC_USE_COUNT;
-+
-+ if (state->mppe) { /* specific for MPPE */
-+ memcpy(state->master_key, options+CILEN_MPPE, MPPE_MAX_KEY_LEN);
-+ memcpy(state->session_key, state->master_key, MPPE_MAX_KEY_LEN);
-+ /* initial key generation is done in mppe_init() */
-+ }
-+
-+ return (void *) state;
-+}
-+
-+static void *
-+mppe_comp_alloc(unsigned char *options, int opt_len)
-+{
-+ return mppe_alloc(options, opt_len, 1);
-+}
-+
-+static void *
-+mppe_decomp_alloc(unsigned char *options, int opt_len)
-+{
-+ return mppe_alloc(options, opt_len, 0);
-+}
-+
-+/* cleanup the (de)compressor */
-+static void
-+mppe_comp_free(void *arg)
-+{
-+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+
-+ if (state != NULL) {
-+ if (state->hist != NULL)
-+ vfree(state->hist);
-+ if (state->hash != NULL)
-+ vfree(state->hash);
-+ kfree(state);
-+ }
-+ MOD_DEC_USE_COUNT;
-+}
-+
-+/* init MPPC/MPPE (de)compresor */
-+/* comp != 0 -> init compressor */
-+/* comp = 0 -> init decompressor */
-+static int
-+mppe_init(void *arg, unsigned char *options, int opt_len, int unit,
-+ int hdrlen, int mru, int debug, int comp)
-+{
-+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+ u8* fname;
-+
-+ fname = comp ? "mppe_comp_init" : "mppe_decomp_init";
-+
-+ if (opt_len < CILEN_MPPE) {
-+ if (debug)
-+ printk(KERN_WARNING "%s: wrong options length: %u\n",
-+ fname, opt_len);
-+ return 0;
-+ }
-+
-+ if (options[0] != CI_MPPE || options[1] != CILEN_MPPE ||
-+ (options[2] & ~MPPE_STATELESS) != 0 ||
-+ options[3] != 0 || options[4] != 0 ||
-+ (options[5] & ~(MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) != 0 ||
-+ (options[5] & (MPPE_56BIT|MPPE_128BIT|MPPE_40BIT|MPPE_MPPC)) == 0) {
-+ if (debug)
-+ printk(KERN_WARNING "%s: options rejected: o[0]=%02x, o[1]=%02x, "
-+ "o[2]=%02x, o[3]=%02x, o[4]=%02x, o[5]=%02x\n", fname,
-+ options[0], options[1], options[2], options[3], options[4],
-+ options[5]);
-+ return 0;
-+ }
-+
-+ if ((options[5] & ~MPPE_MPPC) != MPPE_128BIT &&
-+ (options[5] & ~MPPE_MPPC) != MPPE_56BIT &&
-+ (options[5] & ~MPPE_MPPC) != MPPE_40BIT &&
-+ (options[5] & MPPE_MPPC) != MPPE_MPPC) {
-+ if (debug)
-+ printk(KERN_WARNING "%s: don't know what to do: o[5]=%02x\n",
-+ fname, options[5]);
-+ return 0;
-+ }
-+
-+ state->mppc = options[5] & MPPE_MPPC; /* Do we use MPPC? */
-+ state->mppe = options[5] & (MPPE_128BIT | MPPE_56BIT |
-+ MPPE_40BIT); /* Do we use MPPE? */
-+ state->stateless = options[2] & MPPE_STATELESS; /* Do we use stateless mode? */
-+
-+ switch (state->mppe) {
-+ case MPPE_40BIT: /* 40 bit key */
-+ state->keylen = 8;
-+ state->bitkeylen = 40;
-+ break;
-+ case MPPE_56BIT: /* 56 bit key */
-+ state->keylen = 8;
-+ state->bitkeylen = 56;
-+ break;
-+ case MPPE_128BIT: /* 128 bit key */
-+ state->keylen = 16;
-+ state->bitkeylen = 128;
-+ break;
-+ default:
-+ state->keylen = 0;
-+ state->bitkeylen = 0;
-+ }
-+
-+ state->ccount = MPPE_MAX_CCOUNT;
-+ state->bits = 0;
-+ state->unit = unit;
-+ state->debug = debug;
-+ state->histptr = MPPE_HIST_LEN;
-+ if (state->mppc) { /* reset history if MPPC was negotiated */
-+ memset(state->hist, 0, 2*MPPE_HIST_LEN*sizeof(u8));
-+ }
-+
-+ if (state->mppe) { /* generate initial session keys */
-+ mppe_change_key(state, 1);
-+ }
-+
-+ if (comp) { /* specific for compressor */
-+ state->nextflushed = 1;
-+ } else { /* specific for decompressor */
-+ state->mru = mru;
-+ state->flushexpected = 1;
-+ }
-+
-+ return 1;
-+}
-+
-+static int
-+mppe_comp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+ int hdrlen, int debug)
-+{
-+ return mppe_init(arg, options, opt_len, unit, hdrlen, 0, debug, 1);
-+}
-+
-+
-+static int
-+mppe_decomp_init(void *arg, unsigned char *options, int opt_len, int unit,
-+ int hdrlen, int mru, int debug)
-+{
-+ return mppe_init(arg, options, opt_len, unit, hdrlen, mru, debug, 0);
-+}
-+
-+static void
-+mppe_comp_reset(void *arg)
-+{
-+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: resetting MPPC/MPPE compressor\n",
-+ __FUNCTION__, state->unit);
-+
-+ state->nextflushed = 1;
-+ if (state->mppe)
-+ arcfour_setkey(&state->arcfour_context, state->session_key,
-+ state->keylen);
-+}
-+
-+static void
-+mppe_decomp_reset(void *arg)
-+{
-+ /* When MPPC/MPPE is in use, we shouldn't receive any CCP Reset-Ack.
-+ But when we receive such a packet, we just ignore it. */
-+ return;
-+}
-+
-+static void
-+mppe_stats(void *arg, struct compstat *stats)
-+{
-+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+
-+ *stats = state->stats;
-+}
-+
-+/***************************/
-+/**** Compression stuff ****/
-+/***************************/
-+/* inserts 1 to max. 8 bits into the output buffer */
-+static inline void putbits8(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+ buf += *i;
-+ if (*l >= n) {
-+ *l = (*l) - n;
-+ val <<= *l;
-+ *buf = *buf | (val & 0xff);
-+ if (*l == 0) {
-+ *l = 8;
-+ (*i)++;
-+ *(++buf) = 0;
-+ }
-+ } else {
-+ (*i)++;
-+ *l = 8 - n + (*l);
-+ val <<= *l;
-+ *buf = *buf | ((val >> 8) & 0xff);
-+ *(++buf) = val & 0xff;
-+ }
-+}
-+
-+/* inserts 9 to max. 16 bits into the output buffer */
-+static inline void putbits16(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+ buf += *i;
-+ if (*l >= n - 8) {
-+ (*i)++;
-+ *l = 8 - n + (*l);
-+ val <<= *l;
-+ *buf = *buf | ((val >> 8) & 0xff);
-+ *(++buf) = val & 0xff;
-+ if (*l == 0) {
-+ *l = 8;
-+ (*i)++;
-+ *(++buf) = 0;
-+ }
-+ } else {
-+ (*i)++; (*i)++;
-+ *l = 16 - n + (*l);
-+ val <<= *l;
-+ *buf = *buf | ((val >> 16) & 0xff);
-+ *(++buf) = (val >> 8) & 0xff;
-+ *(++buf) = val & 0xff;
-+ }
-+}
-+
-+/* inserts 17 to max. 24 bits into the output buffer */
-+static inline void putbits24(u8 *buf, u32 val, const u32 n, u32 *i, u32 *l)
-+{
-+ buf += *i;
-+ if (*l >= n - 16) {
-+ (*i)++; (*i)++;
-+ *l = 16 - n + (*l);
-+ val <<= *l;
-+ *buf = *buf | ((val >> 16) & 0xff);
-+ *(++buf) = (val >> 8) & 0xff;
-+ *(++buf) = val & 0xff;
-+ if (*l == 0) {
-+ *l = 8;
-+ (*i)++;
-+ *(++buf) = 0;
-+ }
-+ } else {
-+ (*i)++; (*i)++; (*i)++;
-+ *l = 24 - n + (*l);
-+ val <<= *l;
-+ *buf = *buf | ((val >> 24) & 0xff);
-+ *(++buf) = (val >> 16) & 0xff;
-+ *(++buf) = (val >> 8) & 0xff;
-+ *(++buf) = val & 0xff;
-+ }
-+}
-+
-+static int
-+mppc_compress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+ unsigned char *obuf, int isize, int osize)
-+{
-+ u32 olen, off, len, idx, i, l;
-+ u8 *hist, *sbuf, *p, *q, *r, *s;
-+
-+ /*
-+ At this point, to avoid possible buffer overflow caused by packet
-+ expansion during/after compression, we should make sure that
-+ osize >= (((isize*9)/8)+1)+2, but we don't do that because in
-+ ppp_generic.c we just allocate bigger obuf.
-+
-+ Maximum MPPC packet expansion is 12.5%. This is the worst case when
-+ all octets in the input buffer are >= 0x80 and we cannot find any
-+ repeated tokens. Additionally we have to reserve 2 bytes for MPPE/MPPC
-+ status bits and coherency counter.
-+ */
-+
-+ hist = state->hist + MPPE_HIST_LEN;
-+ /* check if there is enough room at the end of the history */
-+ if (state->histptr + isize >= 2*MPPE_HIST_LEN) {
-+ state->bits |= MPPE_BIT_RESET;
-+ state->histptr = MPPE_HIST_LEN;
-+ memcpy(state->hist, hist, MPPE_HIST_LEN);
-+ }
-+ /* add packet to the history; isize must be <= MPPE_HIST_LEN */
-+ sbuf = state->hist + state->histptr;
-+ memcpy(sbuf, ibuf, isize);
-+ state->histptr += isize;
-+
-+ /* compress data */
-+ r = sbuf + isize;
-+ *obuf = olen = i = 0;
-+ l = 8;
-+ while (i < isize - 2) {
-+ s = q = sbuf + i;
-+ idx = ((40542*((((s[0]<<4)^s[1])<<4)^s[2]))>>4) & 0x1FFF;
-+ p = hist + state->hash[idx];
-+ state->hash[idx] = (u16) (s - hist);
-+ off = s - p;
-+ if (off > 8191 || off < 1 || *p++ != *s++ || *p++ != *s++ || *p++ != *s++)
-+ goto literal;
-+ if (r - q >= 64) {
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++ || *p++ != *s++ || *p++ != *s++ || *p++ != *s++ ||
-+ *p++ != *s++;
-+ if (s - q == 64) {
-+ p--; s--;
-+ while((*p++ == *s++) && (s < r));
-+ }
-+ } else {
-+ while((*p++ == *s++) && (s < r));
-+ }
-+ len = s - q - 1;
-+ i += len;
-+
-+ /* at least 3 character match found; code data */
-+ /* encode offset */
-+ if (off < 64) { /* 10-bit offset; 0 <= offset < 64 */
-+ putbits16(obuf, 0x3c0|off, 10, &olen, &l);
-+ } else if (off < 320) { /* 12-bit offset; 64 <= offset < 320 */
-+ putbits16(obuf, 0xe00|(off-64), 12, &olen, &l);
-+ } else if (off < 8192) { /* 16-bit offset; 320 <= offset < 8192 */
-+ putbits16(obuf, 0xc000|(off-320), 16, &olen, &l);
-+ } else {
-+ /* This shouldn't happen; we return 0 what means "packet expands",
-+ and we send packet uncompressed. */
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: wrong offset value: %d\n",
-+ __FUNCTION__, state->unit, off);
-+ return 0;
-+ }
-+ /* encode length of match */
-+ if (len < 4) { /* length = 3 */
-+ putbits8(obuf, 0, 1, &olen, &l);
-+ } else if (len < 8) { /* 4 <= length < 8 */
-+ putbits8(obuf, 0x08|(len&0x03), 4, &olen, &l);
-+ } else if (len < 16) { /* 8 <= length < 16 */
-+ putbits8(obuf, 0x30|(len&0x07), 6, &olen, &l);
-+ } else if (len < 32) { /* 16 <= length < 32 */
-+ putbits8(obuf, 0xe0|(len&0x0f), 8, &olen, &l);
-+ } else if (len < 64) { /* 32 <= length < 64 */
-+ putbits16(obuf, 0x3c0|(len&0x1f), 10, &olen, &l);
-+ } else if (len < 128) { /* 64 <= length < 128 */
-+ putbits16(obuf, 0xf80|(len&0x3f), 12, &olen, &l);
-+ } else if (len < 256) { /* 128 <= length < 256 */
-+ putbits16(obuf, 0x3f00|(len&0x7f), 14, &olen, &l);
-+ } else if (len < 512) { /* 256 <= length < 512 */
-+ putbits16(obuf, 0xfe00|(len&0xff), 16, &olen, &l);
-+ } else if (len < 1024) { /* 512 <= length < 1024 */
-+ putbits24(obuf, 0x3fc00|(len&0x1ff), 18, &olen, &l);
-+ } else if (len < 2048) { /* 1024 <= length < 2048 */
-+ putbits24(obuf, 0xff800|(len&0x3ff), 20, &olen, &l);
-+ } else if (len < 4096) { /* 2048 <= length < 4096 */
-+ putbits24(obuf, 0x3ff000|(len&0x7ff), 22, &olen, &l);
-+ } else if (len < 8192) { /* 4096 <= length < 8192 */
-+ putbits24(obuf, 0xffe000|(len&0xfff), 24, &olen, &l);
-+ } else {
-+ /* This shouldn't happen; we return 0 what means "packet expands",
-+ and send packet uncompressed. */
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: wrong length of match value: %d\n",
-+ __FUNCTION__, state->unit, len);
-+ return 0;
-+ }
-+ continue;
-+
-+ literal:
-+ /* no match found; encode literal byte */
-+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */
-+ putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
-+ } else { /* literal byte >= 0x80 */
-+ putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
-+ }
-+ }
-+
-+ /* Add remaining octets to the output */
-+ while(isize - i > 0) {
-+ if (ibuf[i] < 0x80) { /* literal byte < 0x80 */
-+ putbits8(obuf, (u32) ibuf[i++], 8, &olen, &l);
-+ } else { /* literal byte >= 0x80 */
-+ putbits16(obuf, (u32) (0x100|(ibuf[i++]&0x7f)), 9, &olen, &l);
-+ }
-+ }
-+ /* Reset unused bits of the last output octet */
-+ if ((l != 0) && (l != 8)) {
-+ putbits8(obuf, 0, l, &olen, &l);
-+ }
-+
-+ return (int) olen;
-+}
-+
-+int
-+mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
-+ int isize, int osize)
-+{
-+ struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
-+ int proto, olen, complen;
-+ unsigned char *wptr;
-+
-+ /* Check that the protocol is in the range we handle. */
-+ proto = PPP_PROTOCOL(ibuf);
-+ if (proto < 0x0021 || proto > 0x00fa)
-+ return 0;
-+
-+ wptr = obuf;
-+ /* Copy over the PPP header */
-+ wptr[0] = PPP_ADDRESS(ibuf);
-+ wptr[1] = PPP_CONTROL(ibuf);
-+ wptr[2] = PPP_COMP >> 8;
-+ wptr[3] = PPP_COMP;
-+ wptr += PPP_HDRLEN + MPPE_OVHD; /* Leave two octets for MPPE/MPPC bits */
-+
-+ mppe_increase_ccount(state);
-+
-+ if (state->nextflushed) {
-+ if (!state->stateless) {
-+ state->nextflushed = 0;
-+ }
-+ state->bits |= MPPE_BIT_FLUSHED;
-+ if (state->mppc) { /* reset history */
-+ state->bits |= MPPE_BIT_RESET;
-+ state->histptr = MPPE_HIST_LEN;
-+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+ }
-+ }
-+
-+ if (state->mppc && !state->mppe) { /* Do only compression */
-+ complen = mppc_compress(state, ibuf+2, wptr, isize-2,
-+ osize-PPP_HDRLEN-MPPE_OVHD);
-+ if ((complen > isize) || (complen == 0)) {
-+ /* packet expands */
-+ state->nextflushed = 1;
-+ memcpy(wptr, ibuf+2, isize-2);
-+ olen = isize + (PPP_HDRLEN / 2) + MPPE_OVHD;
-+ (state->stats).inc_bytes += olen;
-+ (state->stats).inc_packets++;
-+ } else {
-+ state->bits |= MPPE_BIT_COMP;
-+ olen = complen + PPP_HDRLEN + MPPE_OVHD;
-+ (state->stats).comp_bytes += olen;
-+ (state->stats).comp_packets++;
-+ }
-+ } else {
-+ if (!state->mppc && state->mppe) { /* Do only encryption */
-+ /* read from ibuf, write to wptr, adjust for PPP_HDRLEN */
-+ arcfour_encrypt(&state->arcfour_context, ibuf+2, isize-2, wptr);
-+ state->bits |= MPPE_BIT_ENCRYPTED;
-+ olen = isize + (PPP_HDRLEN / 2) + MPPE_OVHD;
-+ (state->stats).inc_bytes += olen;
-+ (state->stats).inc_packets++;
-+ } else { /* Do compression and then encryption - RFC3078 */
-+ complen = mppc_compress(state, ibuf+2, wptr, isize-2,
-+ osize-PPP_HDRLEN-MPPE_OVHD);
-+ if ((complen > isize) || (complen == 0)) {
-+ /* packet expands */
-+ memcpy(wptr, ibuf+2, isize-2);
-+ state->nextflushed = 1;
-+ arcfour_encrypt(&state->arcfour_context, ibuf+2, isize-2, wptr);
-+ olen = isize + (PPP_HDRLEN / 2) + MPPE_OVHD;
-+ (state->stats).inc_bytes += olen;
-+ (state->stats).inc_packets++;
-+ } else {
-+ state->bits |= MPPE_BIT_COMP;
-+ /* Hack warning !!! RC4 implementation which we use does
-+ encryption "in place" - it means that input and output
-+ buffers can be *the same* memory area. Therefore we don't
-+ need to use a temporary buffer. But be careful - other
-+ implementations don't have to be so nice.
-+ I used to use ibuf as temporary buffer here, but it led
-+ packet sniffers into error. Thanks to Wilfried Weissmann
-+ for pointing that. */
-+ arcfour_encrypt(&state->arcfour_context, wptr, complen, wptr);
-+ olen = complen + PPP_HDRLEN + MPPE_OVHD;
-+ (state->stats).comp_bytes += olen;
-+ (state->stats).comp_packets++;
-+ }
-+ state->bits |= MPPE_BIT_ENCRYPTED;
-+ }
-+ }
-+
-+ /* write status bits and coherency counter into the output buffer */
-+ wptr = obuf + PPP_HDRLEN;
-+ wptr[0] = MPPE_CTRLHI(state);
-+ wptr[1] = MPPE_CTRLLO(state);
-+
-+ state->bits = 0;
-+
-+ (state->stats).unc_bytes += isize;
-+ (state->stats).unc_packets++;
-+
-+ return olen;
-+}
-+
-+/***************************/
-+/*** Decompression stuff ***/
-+/***************************/
-+static inline u32 getbits(const u8 *buf, const u32 n, u32 *i, u32 *l)
-+{
-+ static u32 m[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff};
-+ u32 res, ol;
-+
-+ ol = *l;
-+ if (*l >= n) {
-+ *l = (*l) - n;
-+ res = (buf[*i] & m[ol]) >> (*l);
-+ if (*l == 0) {
-+ *l = 8;
-+ (*i)++;
-+ }
-+ } else {
-+ *l = 8 - n + (*l);
-+ res = (buf[(*i)++] & m[ol]) << 8;
-+ res = (res | buf[*i]) >> (*l);
-+ }
-+
-+ return res;
-+}
-+
-+static inline u32 getbyte(const u8 *buf, const u32 i, const u32 l)
-+{
-+ if (l == 8) {
-+ return buf[i];
-+ } else {
-+ return (((buf[i] << 8) | buf[i+1]) >> l) & 0xff;
-+ }
-+}
-+
-+static inline void lamecopy(u8 *dst, u8 *src, u32 len)
-+{
-+ while (len--)
-+ *dst++ = *src++;
-+}
-+
-+static int
-+mppc_decompress(struct ppp_mppe_state *state, unsigned char *ibuf,
-+ unsigned char *obuf, int isize, int osize)
-+{
-+ u32 olen, off, len, bits, val, sig, i, l;
-+ u8 *history, *s;
-+
-+ history = state->hist + state->histptr;
-+ olen = len = i = 0;
-+ l = 8;
-+ bits = isize * 8;
-+ while (bits >= 8) {
-+ val = getbyte(ibuf, i++, l);
-+ if (val < 0x80) { /* literal byte < 0x80 */
-+ if (state->histptr < 2*MPPE_HIST_LEN) {
-+ /* copy uncompressed byte to the history */
-+ (state->hist)[(state->histptr)++] = (u8) val;
-+ } else {
-+ /* buffer overflow; drop packet */
-+ if (state->debug)
-+ printk(KERN_ERR "%s%d: trying to write outside history "
-+ "buffer\n", __FUNCTION__, state->unit);
-+ return DECOMP_ERROR;
-+ }
-+ olen++;
-+ bits -= 8;
-+ continue;
-+ }
-+
-+ sig = val & 0xc0;
-+ if (sig == 0x80) { /* literal byte >= 0x80 */
-+ if (state->histptr < 2*MPPE_HIST_LEN) {
-+ /* copy uncompressed byte to the history */
-+ (state->hist)[(state->histptr)++] =
-+ (u8) (0x80|((val&0x3f)<<1)|getbits(ibuf, 1 , &i ,&l));
-+ } else {
-+ /* buffer overflow; drop packet */
-+ if (state->debug)
-+ printk(KERN_ERR "%s%d: trying to write outside history "
-+ "buffer\n", __FUNCTION__, state->unit);
-+ return DECOMP_ERROR;
-+ }
-+ olen++;
-+ bits -= 9;
-+ continue;
-+ }
-+
-+ /* Not a literal byte so it must be an (offset,length) pair */
-+ /* decode offset */
-+ sig = val & 0xf0;
-+ if (sig == 0xf0) { /* 10-bit offset; 0 <= offset < 64 */
-+ off = (((val&0x0f)<<2)|getbits(ibuf, 2 , &i ,&l));
-+ bits -= 10;
-+ } else {
-+ if (sig == 0xe0) { /* 12-bit offset; 64 <= offset < 320 */
-+ off = ((((val&0x0f)<<4)|getbits(ibuf, 4 , &i ,&l))+64);
-+ bits -= 12;
-+ } else {
-+ if ((sig&0xe0) == 0xc0) {/* 16-bit offset; 320 <= offset < 8192 */
-+ off = ((((val&0x1f)<<8)|getbyte(ibuf, i++, l))+320);
-+ bits -= 16;
-+ if (off > MPPE_HIST_LEN - 1) {
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: too big offset value: %d\n",
-+ __FUNCTION__, state->unit, off);
-+ return DECOMP_ERROR;
-+ }
-+ } else { /* this shouldn't happen */
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: cannot decode offset value\n",
-+ __FUNCTION__, state->unit);
-+ return DECOMP_ERROR;
-+ }
-+ }
-+ }
-+ /* decode length of match */
-+ val = getbyte(ibuf, i, l);
-+ if ((val & 0x80) == 0x00) { /* len = 3 */
-+ len = 3;
-+ bits--;
-+ getbits(ibuf, 1 , &i ,&l);
-+ } else if ((val & 0xc0) == 0x80) { /* 4 <= len < 8 */
-+ len = 0x04 | ((val>>4) & 0x03);
-+ bits -= 4;
-+ getbits(ibuf, 4 , &i ,&l);
-+ } else if ((val & 0xe0) == 0xc0) { /* 8 <= len < 16 */
-+ len = 0x08 | ((val>>2) & 0x07);
-+ bits -= 6;
-+ getbits(ibuf, 6 , &i ,&l);
-+ } else if ((val & 0xf0) == 0xe0) { /* 16 <= len < 32 */
-+ len = 0x10 | (val & 0x0f);
-+ bits -= 8;
-+ i++;
-+ } else {
-+ bits -= 8;
-+ val = (val << 8) | getbyte(ibuf, ++i, l);
-+ if ((val & 0xf800) == 0xf000) { /* 32 <= len < 64 */
-+ len = 0x0020 | ((val >> 6) & 0x001f);
-+ bits -= 2;
-+ getbits(ibuf, 2 , &i ,&l);
-+ } else if ((val & 0xfc00) == 0xf800) { /* 64 <= len < 128 */
-+ len = 0x0040 | ((val >> 4) & 0x003f);
-+ bits -= 4;
-+ getbits(ibuf, 4 , &i ,&l);
-+ } else if ((val & 0xfe00) == 0xfc00) { /* 128 <= len < 256 */
-+ len = 0x0080 | ((val >> 2) & 0x007f);
-+ bits -= 6;
-+ getbits(ibuf, 6 , &i ,&l);
-+ } else if ((val & 0xff00) == 0xfe00) { /* 256 <= len < 512 */
-+ len = 0x0100 | (val & 0x00ff);
-+ bits -= 8;
-+ i++;
-+ } else {
-+ bits -= 8;
-+ val = (val << 8) | getbyte(ibuf, ++i, l);
-+ if ((val & 0xff8000) == 0xff0000) { /* 512 <= len < 1024 */
-+ len = 0x000200 | ((val >> 6) & 0x0001ff);
-+ bits -= 2;
-+ getbits(ibuf, 2 , &i ,&l);
-+ } else if ((val & 0xffc000) == 0xff8000) {/* 1024 <= len < 2048 */
-+ len = 0x000400 | ((val >> 4) & 0x0003ff);
-+ bits -= 4;
-+ getbits(ibuf, 4 , &i ,&l);
-+ } else if ((val & 0xffe000) == 0xffc000) {/* 2048 <= len < 4096 */
-+ len = 0x000800 | ((val >> 2) & 0x0007ff);
-+ bits -= 6;
-+ getbits(ibuf, 6 , &i ,&l);
-+ } else if ((val & 0xfff000) == 0xffe000) {/* 4096 <= len < 8192 */
-+ len = 0x001000 | (val & 0x000fff);
-+ bits -= 8;
-+ i++;
-+ } else { /* this shouldn't happen */
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: wrong length code: 0x%X\n",
-+ __FUNCTION__, state->unit, val);
-+ return DECOMP_ERROR;
-+ }
-+ }
-+ }
-+ s = state->hist + state->histptr;
-+ state->histptr += len;
-+ olen += len;
-+ if (state->histptr < 2*MPPE_HIST_LEN) {
-+ /* copy uncompressed bytes to the history */
-+
-+ /* In some cases len may be greater than off. It means that memory
-+ * areas pointed by s and s-off overlap. I used to use memmove()
-+ * here, because I thought that it acts as libc's version. But
-+ * I was wrong. I got strange errors sometimes. Wilfried suggested
-+ * using of byte by byte copying here and strange errors disappeared.
-+ */
-+ lamecopy(s, s-off, len);
-+ } else {
-+ /* buffer overflow; drop packet */
-+ if (state->debug)
-+ printk(KERN_ERR "%s%d: trying to write outside history "
-+ "buffer\n", __FUNCTION__, state->unit);
-+ return DECOMP_ERROR;
-+ }
-+ }
-+
-+ if (olen <= osize) {
-+ /* copy uncompressed packet to the output buffer */
-+ memcpy(obuf, history, olen);
-+ } else {
-+ /* buffer overflow; drop packet */
-+ if (state->debug)
-+ printk(KERN_ERR "%s%d: too big uncompressed packet: %d\n",
-+ __FUNCTION__, state->unit, olen+(PPP_HDRLEN/2));
-+ return DECOMP_ERROR;
-+ }
-+
-+ return (int) olen;
-+}
-+
-+int
-+mppe_decompress(void *arg, unsigned char *ibuf, int isize,
-+ unsigned char *obuf, int osize)
-+{
-+ struct ppp_mppe_state *state = (struct ppp_mppe_state *)arg;
-+ int seq, bits, uncomplen;
-+
-+ if (isize <= PPP_HDRLEN + MPPE_OVHD) {
-+ if (state->debug) {
-+ printk(KERN_DEBUG "%s%d: short packet (len=%d)\n", __FUNCTION__,
-+ state->unit, isize);
-+ }
-+ return DECOMP_ERROR;
-+ }
-+
-+ /* Get coherency counter and control bits from input buffer */
-+ seq = MPPE_CCOUNT(ibuf);
-+ bits = MPPE_BITS(ibuf);
-+
-+ if (state->stateless) {
-+ /* RFC 3078, sec 8.1. */
-+ mppe_increase_ccount(state);
-+ if ((seq != state->ccount) && state->debug)
-+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+ __FUNCTION__, state->unit, seq, state->ccount);
-+ while (seq != state->ccount)
-+ mppe_increase_ccount(state);
-+ } else {
-+ /* RFC 3078, sec 8.2. */
-+ if (state->flushexpected) { /* discard state */
-+ if ((bits & MPPE_BIT_FLUSHED)) { /* we received expected FLUSH bit */
-+ while (seq != state->ccount)
-+ mppe_increase_ccount(state);
-+ state->flushexpected = 0;
-+ } else /* drop packet*/
-+ return DECOMP_ERROR;
-+ } else { /* normal state */
-+ mppe_increase_ccount(state);
-+ if (seq != state->ccount) {
-+ /* Packet loss detected, enter the discard state. */
-+ if (state->debug)
-+ printk(KERN_DEBUG "%s%d: bad sequence number: %d, expected: %d\n",
-+ __FUNCTION__, state->unit, seq, state->ccount);
-+ state->flushexpected = 1;
-+ return DECOMP_ERROR;
-+ }
-+ }
-+ if (state->mppe && (bits & MPPE_BIT_FLUSHED)) {
-+ arcfour_setkey(&state->arcfour_context, state->session_key,
-+ state->keylen);
-+ }
-+ }
-+
-+ if (state->mppc && (bits & (MPPE_BIT_FLUSHED | MPPE_BIT_RESET))) {
-+ state->histptr = MPPE_HIST_LEN;
-+ if ((bits & MPPE_BIT_FLUSHED)) {
-+ memset(state->hist + MPPE_HIST_LEN, 0, MPPE_HIST_LEN*sizeof(u8));
-+ } else
-+ if ((bits & MPPE_BIT_RESET)) {
-+ memcpy(state->hist, state->hist+MPPE_HIST_LEN, MPPE_HIST_LEN);
-+ }
-+ }
-+
-+ /* Fill in the first part of the PPP header. The protocol field
-+ comes from the decompressed data. */
-+ obuf[0] = PPP_ADDRESS(ibuf);
-+ obuf[1] = PPP_CONTROL(ibuf);
-+ obuf += PPP_HDRLEN / 2;
-+
-+ if (state->mppe) { /* process encrypted packet */
-+ if ((bits & MPPE_BIT_ENCRYPTED)) {
-+ /* OK, packet encrypted, so decrypt it */
-+ if (state->mppc && (bits & MPPE_BIT_COMP)) {
-+ /* Hack warning !!! RC4 implementation which we use does
-+ decryption "in place" - it means that input and output
-+ buffers can be *the same* memory area. Therefore we don't
-+ need to use a temporary buffer. But be careful - other
-+ implementations don't have to be so nice. */
-+ arcfour_decrypt(&state->arcfour_context, ibuf+PPP_HDRLEN+MPPE_OVHD,
-+ isize-PPP_HDRLEN-MPPE_OVHD, ibuf+PPP_HDRLEN+MPPE_OVHD);
-+ uncomplen = mppc_decompress(state, ibuf+PPP_HDRLEN+MPPE_OVHD,
-+ obuf, isize-PPP_HDRLEN-MPPE_OVHD,
-+ osize-(PPP_HDRLEN/2));
-+ if (uncomplen == DECOMP_ERROR) {
-+ state->flushexpected = 1;
-+ return DECOMP_ERROR;
-+ }
-+ uncomplen += PPP_HDRLEN / 2;
-+ (state->stats).comp_bytes += isize;
-+ (state->stats).comp_packets++;
-+ } else {
-+ arcfour_decrypt(&state->arcfour_context, ibuf+PPP_HDRLEN+MPPE_OVHD,
-+ isize-PPP_HDRLEN-MPPE_OVHD, obuf);
-+ uncomplen = isize - (PPP_HDRLEN / 2) - MPPE_OVHD;
-+ (state->stats).inc_bytes += isize;
-+ (state->stats).inc_packets++;
-+ }
-+ } else { /* this shouldn't happen */
-+ if (state->debug)
-+ printk(KERN_ERR "%s%d: encryption negotiated but not an "
-+ "encrypted packet received\n", __FUNCTION__, state->unit);
-+ mppe_change_key(state, 0);
-+ state->flushexpected = 1;
-+ return DECOMP_ERROR;
-+ }
-+ } else {
-+ if (state->mppc) { /* no MPPE, only MPPC */
-+ if ((bits & MPPE_BIT_COMP)) {
-+ uncomplen = mppc_decompress(state, ibuf+PPP_HDRLEN+MPPE_OVHD,
-+ obuf, isize-PPP_HDRLEN-MPPE_OVHD,
-+ osize-(PPP_HDRLEN/2));
-+ if (uncomplen == DECOMP_ERROR) {
-+ state->flushexpected = 1;
-+ return DECOMP_ERROR;
-+ }
-+ uncomplen += PPP_HDRLEN / 2;
-+ (state->stats).comp_bytes += isize;
-+ (state->stats).comp_packets++;
-+ } else {
-+ memcpy(obuf, ibuf+PPP_HDRLEN+MPPE_OVHD,
-+ isize-PPP_HDRLEN-MPPE_OVHD);
-+ uncomplen = isize - (PPP_HDRLEN / 2) - MPPE_OVHD;
-+ (state->stats).inc_bytes += isize;
-+ (state->stats).inc_packets++;
-+ }
-+ } else { /* this shouldn't happen */
-+ if (state->debug)
-+ printk(KERN_ERR "%s%d: error - no MPPC nor MPPE negotiated\n",
-+ __FUNCTION__, state->unit);
-+ state->flushexpected = 1;
-+ return DECOMP_ERROR;
-+ }
-+ }
-+
-+ (state->stats).unc_bytes += uncomplen;
-+ (state->stats).unc_packets++;
-+
-+ return uncomplen;
-+}
-+
-+
-+/************************************************************
-+ * Module interface table
-+ ************************************************************/
-+
-+/* These are in ppp_generic.c */
-+extern int ppp_register_compressor (struct compressor *cp);
-+extern void ppp_unregister_compressor (struct compressor *cp);
-+
-+/*
-+ * Functions exported to ppp_generic.c.
-+ */
-+struct compressor ppp_mppe = {
-+ CI_MPPE, /* compress_proto */
-+ mppe_comp_alloc, /* comp_alloc */
-+ mppe_comp_free, /* comp_free */
-+ mppe_comp_init, /* comp_init */
-+ mppe_comp_reset, /* comp_reset */
-+ mppe_compress, /* compress */
-+ mppe_stats, /* comp_stat */
-+ mppe_decomp_alloc, /* decomp_alloc */
-+ mppe_comp_free, /* decomp_free */
-+ mppe_decomp_init, /* decomp_init */
-+ mppe_decomp_reset, /* decomp_reset */
-+ mppe_decompress, /* decompress */
-+ NULL, /* incomp */
-+ mppe_stats, /* decomp_stat */
-+};
-+
-+/*
-+ In case of MPPC/MPPE there is no need to process incompressible data
-+ because such a data is sent in MPPC/MPPE frame. Therefore the (*incomp)
-+ callback function isn't needed.
-+*/
-+
-+/************************************************************
-+ * Module support routines
-+ ************************************************************/
-+
-+int __init mppe_module_init(void)
-+{
-+ int answer = ppp_register_compressor(&ppp_mppe);
-+ if (answer == 0) {
-+ printk(KERN_INFO "MPPE/MPPC encryption/compression module registered\n");
-+ }
-+ return answer;
-+}
-+
-+void __exit mppe_module_cleanup(void)
-+{
-+ if (MOD_IN_USE) {
-+ printk (KERN_INFO "MPPE/MPPC module busy, removing delayed\n");
-+ } else {
-+ ppp_unregister_compressor (&ppp_mppe);
-+ printk(KERN_INFO "MPPE/MPPC encryption/compression module unregistered\n");
-+ }
-+}
-+
-+module_init(mppe_module_init);
-+module_exit(mppe_module_cleanup);
-+
-+MODULE_AUTHOR("Jan Dubiec <jdx@slackware.pl>");
-+MODULE_DESCRIPTION("MPPE/MPPC encryption/compression module for Linux");
-+MODULE_LICENSE("Dual BSD/GPL");
-diff -ruN linux-2.4.21.orig/include/linux/ppp-comp.h linux-2.4.21/include/linux/ppp-comp.h
---- linux-2.4.21.orig/include/linux/ppp-comp.h 1999-08-06 19:44:11.000000000 +0200
-+++ linux-2.4.21/include/linux/ppp-comp.h 2003-07-15 01:45:22.000000000 +0200
-@@ -1,34 +1,42 @@
- /*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
-- * Copyright (c) 1994 The Australian National University.
-- * All rights reserved.
-+ * Copyright (c) 1984 Paul Mackerras. All rights reserved.
- *
-- * Permission to use, copy, modify, and distribute this software and its
-- * documentation is hereby granted, provided that the above copyright
-- * notice appears in all copies. This software is provided without any
-- * warranty, express or implied. The Australian National University
-- * makes no representations about the suitability of this software for
-- * any purpose.
-- *
-- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
-- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
-- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
-- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
-- * OF SUCH DAMAGE.
-- *
-- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
-- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
-- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
-- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
-- * OR MODIFICATIONS.
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
- *
-- * $Id: ppp-comp.h,v 1.6 1997/11/27 06:04:44 paulus Exp $
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ *
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ *
-+ * 3. The name(s) of the authors of this software must not be used to
-+ * endorse or promote products derived from this software without
-+ * prior written permission.
-+ *
-+ * 4. Redistributions of any form whatsoever must retain the following
-+ * acknowledgment:
-+ * "This product includes software developed by Paul Mackerras
-+ * <paulus@samba.org>".
-+ *
-+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
-+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
-+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
-+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
-+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ * $Id: ppp-comp.h,v 1.10 2002/12/06 09:49:15 paulus Exp $
- */
-
- /*
-- * ==FILEVERSION 980319==
-+ * ==FILEVERSION 20020715==
- *
- * NOTE TO MAINTAINERS:
- * If you modify this file at all, please set the above date.
-@@ -78,7 +86,7 @@
-
- /* Compress a packet */
- int (*compress) (void *state, unsigned char *rptr,
-- unsigned char *obuf, int isize, int osize);
-+ unsigned char *obuf, int isize, int osize);
-
- /* Return compression statistics */
- void (*comp_stat) (void *state, struct compstat *stats);
-@@ -99,7 +107,7 @@
-
- /* Decompress a packet. */
- int (*decompress) (void *state, unsigned char *ibuf, int isize,
-- unsigned char *obuf, int osize);
-+ unsigned char *obuf, int osize);
-
- /* Update state for an incompressible packet received */
- void (*incomp) (void *state, unsigned char *ibuf, int icnt);
-@@ -187,6 +195,127 @@
- #define DEFLATE_CHK_SEQUENCE 0
-
- /*
-+ * Definitions for MPPE.
-+ */
-+
-+#define CI_MPPE 18 /* config option for MPPE */
-+#define CILEN_MPPE 6 /* length of config option */
-+
-+#define MPPE_PAD 4 /* MPPE growth per frame */
-+#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) */
-+
-+/* option bits for ccp_options.mppe */
-+#define MPPE_OPT_40 0x01 /* 40 bit */
-+#define MPPE_OPT_128 0x02 /* 128 bit */
-+#define MPPE_OPT_STATEFUL 0x04 /* stateful mode */
-+/* unsupported opts */
-+#define MPPE_OPT_56 0x08 /* 56 bit */
-+#define MPPE_OPT_MPPC 0x10 /* MPPC compression */
-+#define MPPE_OPT_D 0x20 /* Unknown */
-+#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
-+#define MPPE_OPT_UNKNOWN 0x40 /* Bits !defined in RFC 3078 were set */
-+
-+/*
-+ * This is not nice ... the alternative is a bitfield struct though.
-+ * And unfortunately, we cannot share the same bits for the option
-+ * names above since C and H are the same bit. We could do a u_int32
-+ * but then we have to do a htonl() all the time and/or we still need
-+ * to know which octet is which.
-+ */
-+#define MPPE_C_BIT 0x01 /* MPPC */
-+#define MPPE_D_BIT 0x10 /* Obsolete, usage unknown */
-+#define MPPE_L_BIT 0x20 /* 40-bit */
-+#define MPPE_S_BIT 0x40 /* 128-bit */
-+#define MPPE_M_BIT 0x80 /* 56-bit, not supported */
-+#define MPPE_H_BIT 0x01 /* Stateless (in a different byte) */
-+
-+/* Does not include H bit; used for least significant octet only. */
-+#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)
-+
-+/* Build a CI from mppe opts (see RFC 3078) */
-+#define MPPE_OPTS_TO_CI(opts, ci) \
-+ do { \
-+ u_char *ptr = ci; /* u_char[4] */ \
-+ \
-+ /* H bit */ \
-+ if (opts & MPPE_OPT_STATEFUL) \
-+ *ptr++ = 0x0; \
-+ else \
-+ *ptr++ = MPPE_H_BIT; \
-+ *ptr++ = 0; \
-+ *ptr++ = 0; \
-+ \
-+ /* S,L bits */ \
-+ *ptr = 0; \
-+ if (opts & MPPE_OPT_128) \
-+ *ptr |= MPPE_S_BIT; \
-+ if (opts & MPPE_OPT_40) \
-+ *ptr |= MPPE_L_BIT; \
-+ /* M,D,C bits not supported */ \
-+ } while (/* CONSTCOND */ 0)
-+
-+/* The reverse of the above */
-+#define MPPE_CI_TO_OPTS(ci, opts) \
-+ do { \
-+ u_char *ptr = ci; /* u_char[4] */ \
-+ \
-+ opts = 0; \
-+ \
-+ /* H bit */ \
-+ if (!(ptr[0] & MPPE_H_BIT)) \
-+ opts |= MPPE_OPT_STATEFUL; \
-+ \
-+ /* S,L bits */ \
-+ if (ptr[3] & MPPE_S_BIT) \
-+ opts |= MPPE_OPT_128; \
-+ if (ptr[3] & MPPE_L_BIT) \
-+ opts |= MPPE_OPT_40; \
-+ \
-+ /* M,D,C bits */ \
-+ if (ptr[3] & MPPE_M_BIT) \
-+ opts |= MPPE_OPT_56; \
-+ if (ptr[3] & MPPE_D_BIT) \
-+ opts |= MPPE_OPT_D; \
-+ if (ptr[3] & MPPE_C_BIT) \
-+ opts |= MPPE_OPT_MPPC; \
-+ \
-+ /* Other bits */ \
-+ if (ptr[0] & ~MPPE_H_BIT) \
-+ opts |= MPPE_OPT_UNKNOWN; \
-+ if (ptr[1] || ptr[2]) \
-+ opts |= MPPE_OPT_UNKNOWN; \
-+ if (ptr[3] & ~MPPE_ALL_BITS) \
-+ opts |= MPPE_OPT_UNKNOWN; \
-+ } while (/* CONSTCOND */ 0)
-+
-+/* MPPE/MPPC definitions by J.D.*/
-+#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */
-+#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */
-+#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */
-+#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */
-+#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */
-+
-+/*
-+ * Definitions for Stac LZS.
-+ */
-+
-+#define CI_LZS 17 /* config option for Stac LZS */
-+#define CILEN_LZS 5 /* length of config option */
-+
-+#define LZS_OVHD 4 /* max. LZS overhead */
-+#define LZS_HIST_LEN 2048 /* LZS history size */
-+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */
-+
-+#define LZS_MODE_NONE 0
-+#define LZS_MODE_LCB 1
-+#define LZS_MODE_CRC 2
-+#define LZS_MODE_SEQ 3
-+#define LZS_MODE_EXT 4
-+
-+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */
-+#define LZS_EXT_BIT_COMP 0x20 /* bit C */
-+
-+/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
+++ /dev/null
---- linux/Makefile 2004-08-16 21:31:21.850402752 -0400
-+++ linux/Makefile 2004-08-16 21:48:22.372259848 -0400
-@@ -357,7 +357,7 @@
- @rm -f .ver1
-
- include/linux/version.h: ./Makefile
-- @expr length "$(KERNELRELEASE)" \<= $(uts_len) > /dev/null || \
-+ @expr "$(KERNELRELEASE)" : '.*' \<= $(uts_len) > /dev/null || \
- (echo KERNELRELEASE \"$(KERNELRELEASE)\" exceeds $(uts_len) characters >&2; false)
- @echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" > .ver
- @echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)` >> .ver
+++ /dev/null
---- libpcap0.8-0.8.3.orig/debian/compat
-+++ libpcap0.8-0.8.3/debian/compat
-@@ -0,0 +1,2 @@
-+4
-+
---- libpcap0.8-0.8.3.orig/debian/copyright
-+++ libpcap0.8-0.8.3/debian/copyright
-@@ -0,0 +1,115 @@
-+This package was debianized by Romain Francoise <rfrancoise@debian.org>
-+on Fri, 16 Apr 2004 18:41:39 +0200, based on work by:
-+ + Anand Kumria <wildfire@progsoc.org>
-+ + Torsten Landschoff <torsten@debian.org>
-+
-+It was downloaded from http://tcpdump.org/release/libpcap-0.8.3.tar.gz
-+
-+Upstream Authors: tcpdump-workers@tcpdump.org
-+
-+Licensed under the 3-clause BSD license:
-+
-+ Redistribution and use in source and binary forms, with or without
-+ modification, are permitted provided that the following conditions
-+ are met:
-+
-+ 1. Redistributions of source code must retain the above copyright
-+ notice, this list of conditions and the following disclaimer.
-+ 2. Redistributions in binary form must reproduce the above copyright
-+ notice, this list of conditions and the following disclaimer in
-+ the documentation and/or other materials provided with the
-+ distribution.
-+ 3. The names of the authors may not be used to endorse or promote
-+ products derived from this software without specific prior
-+ written permission.
-+
-+ THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-+ IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-+
-+Current upstream maintainers:
-+ Bill Fenner <fenner@research.att.com>
-+ Fulvio Risso <risso@polito.it>
-+ Guy Harris <guy@alum.mit.edu>
-+ Hannes Gredler <hannes@juniper.net>
-+ Jun-ichiro itojun Hagino <itojun@iijlab.net>
-+ Michael Richardson <mcr@sandelman.ottawa.on.ca>
-+
-+Additional people who have contributed patches:
-+
-+ Alan Bawden <Alan@LCS.MIT.EDU>
-+ Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
-+ Albert Chin <china@thewrittenword.com>
-+ Andrew Brown <atatat@atatdot.net>
-+ Antti Kantee <pooka@netbsd.org>
-+ Arkadiusz Miskiewicz <misiek@pld.org.pl>
-+ Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
-+ Assar Westerlund <assar@sics.se>
-+ Brian Ginsbach <ginsbach@cray.com>
-+ Charles M. Hannum <mycroft@netbsd.org>
-+ Chris G. Demetriou <cgd@netbsd.org>
-+ Chris Pepper <pepper@mail.reppep.com>
-+ Darren Reed <darrenr@reed.wattle.id.au>
-+ David Kaelbling <drk@sgi.com>
-+ David Young <dyoung@ojctech.com>
-+ Don Ebright <Don.Ebright@compuware.com>
-+ Eric Anderson <anderse@hpl.hp.com>
-+ Franz Schaefer <schaefer@mond.at>
-+ Gianluca Varenni <varenni@netgroup-serv.polito.it>
-+ Gisle Vanem <giva@bgnett.no>
-+ Graeme Hewson <ghewson@cix.compulink.co.uk>
-+ Greg Stark <gsstark@mit.edu>
-+ Greg Troxel <gdt@ir.bbn.com>
-+ Guillaume Pelat <endymion_@users.sourceforge.net>
-+ Hyung Sik Yoon <hsyn@kr.ibm.com>
-+ Igor Khristophorov <igor@atdot.org>
-+ Jan-Philip Velders <jpv@veldersjes.net>
-+ Jason R. Thorpe <thorpej@netbsd.org>
-+ Javier Achirica <achirica@ttd.net>
-+ Jean Tourrilhes <jt@hpl.hp.com>
-+ Jefferson Ogata <jogata@nodc.noaa.gov>
-+ Jesper Peterson <jesper@endace.com>
-+ John Bankier <jbankier@rainfinity.com>
-+ Jon Lindgren <jonl@yubyub.net>
-+ Juergen Schoenwaelder <schoenw@ibr.cs.tu-bs.de>
-+ Kazushi Sugyo <sugyo@pb.jp.nec.com>
-+ Klaus Klein <kleink@netbsd.org>
-+ Koryn Grant <koryn@endace.com>
-+ Krzysztof Halasa <khc@pm.waw.pl>
-+ Lorenzo Cavallaro <sullivan@sikurezza.org>
-+ Loris Degioanni <loris@netgroup-serv.polito.it>
-+ Love Hörnquist-Åstrand <lha@stacken.kth.se>
-+ Maciej W. Rozycki <macro@ds2.pg.gda.pl>
-+ Marcus Felipe Pereira <marcus@task.com.br>
-+ Martin Husemann <martin@netbsd.org>
-+ Mike Wiacek <mike@iroot.net>
-+ Monroe Williams <monroe@pobox.com>
-+ Octavian Cerna <tavy@ylabs.com>
-+ Olaf Kirch <okir@caldera.de>
-+ Onno van der Linden <onno@simplex.nl>
-+ Paul Mundt <lethal@linux-sh.org>
-+ Pavel Kankovsky <kan@dcit.cz>
-+ Peter Fales <peter@fales-lorenz.net>
-+ Peter Jeremy <peter.jeremy@alcatel.com.au>
-+ Phil Wood <cpw@lanl.gov>
-+ Rafal Maszkowski <rzm@icm.edu.pl>
-+ Rick Jones <raj@cup.hp.com>
-+ Scott Barron <sb125499@ohiou.edu>
-+ Scott Gifford <sgifford@tir.com>
-+ Sebastian Krahmer <krahmer@cs.uni-potsdam.de>
-+ Shaun Clowes <delius@progsoc.uts.edu.au>
-+ Solomon Peachy <pizza@shaftnet.org>
-+ Stefan Hudson <hudson@mbay.net>
-+ Takashi Yamamoto <yamt@mwd.biglobe.ne.jp>
-+ Tony Li <tli@procket.com>
-+ Torsten Landschoff <torsten@debian.org>
-+ Uns Lider <unslider@miranda.org>
-+ Uwe Girlich <Uwe.Girlich@philosys.de>
-+ Xianjie Zhang <xzhang@cup.hp.com>
-+ Yen Yen Lim
-+ Yoann Vandoorselaere <yoann@prelude-ids.org>
-+
-+The original LBL crew:
-+ Steve McCanne
-+ Craig Leres
-+ Van Jacobson
---- libpcap0.8-0.8.3.orig/debian/control
-+++ libpcap0.8-0.8.3/debian/control
-@@ -0,0 +1,44 @@
-+Source: libpcap0.8
-+Section: devel
-+Priority: optional
-+Maintainer: Romain Francoise <rfrancoise@debian.org>
-+Uploaders: Torsten Landschoff <torsten@debian.org>
-+Build-Depends: debhelper (>= 4), flex, bison, dpatch, perl
-+Standards-Version: 3.6.1.0
-+
-+Package: libpcap0.8-dev
-+Section: libdevel
-+Architecture: any
-+Depends: libpcap0.8 (= ${Source-Version}), libc6-dev
-+Conflicts: libpcap-dev, libpcap0.7-dev
-+Description: Development library and header files for libpcap 0.8
-+ Headers, static libraries, and documentation for the libpcap library.
-+ .
-+ libpcap (Packet CAPture) provides a portable framework for low-level
-+ network monitoring. Applications include network statistics
-+ collection, security monitoring, network debugging, etc.
-+ .
-+ Since almost every system vendor provides a different interface for
-+ packet capture, and since there are several tools that require this
-+ functionality, we've created this system-independent API to ease in
-+ porting and to alleviate the need for several system-dependent packet
-+ capture modules in each application.
-+ .
-+ Further information is available at <URL: http://www.tcpdump.org/>
-+
-+Package: libpcap0.8
-+Section: libs
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Description: System interface for user-level packet capture
-+ libpcap (Packet CAPture) provides a portable framework for low-level
-+ network monitoring. Applications include network statistics collection,
-+ security monitoring, network debugging, etc.
-+ .
-+ Since almost every system vendor provides a different interface for
-+ packet capture, and since there are several tools that require this
-+ functionality, we've created this system-independent API to ease in
-+ porting and to alleviate the need for several system-dependent packet
-+ capture modules in each application.
-+ .
-+ Further information is available at <URL: http://www.tcpdump.org/>
---- libpcap0.8-0.8.3.orig/debian/changelog
-+++ libpcap0.8-0.8.3/debian/changelog
-@@ -0,0 +1,236 @@
-+libpcap0.8 (0.8.3-4) unstable; urgency=low
-+
-+ * debian/patches/30_man_fixes.dpatch: Explicitly mention `pcap_handler'
-+ as routine type for pcap_loop() and pcap_dispatch() callbacks,
-+ suggested by Florian Weimer <fw@deneb.enyo.de> (closes: #255267).
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Wed, 21 Jul 2004 19:46:07 +0200
-+
-+libpcap0.8 (0.8.3-3) unstable; urgency=low
-+
-+ * debian/control: libpcap0.8-dev conflicts with libpcap0.7-dev.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Wed, 9 Jun 2004 11:44:50 +0200
-+
-+libpcap0.8 (0.8.3-2) unstable; urgency=low
-+
-+ * debian/control:
-+ + Put back URL markers in description.
-+ + Switch Maintainer and Uploaders fields to match reality.
-+ * debian/patches/30_man_fixes.dpatch: Patch to fix some inconsistencies
-+ in the upstream man page (tcpdump is in section 8, not 1).
-+ * debian/patches/00list: Add 30_man_fixes.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Fri, 14 May 2004 23:43:02 +0200
-+
-+libpcap0.8 (0.8.3-1) unstable; urgency=low
-+
-+ * New upstream release (closes: #235155).
-+ + bpf_filter.c now has config.h (closes: #171210).
-+ + Does not ship CVS directories anymore (closes: #119750).
-+ + Has improved "truncated file" messages (closes: #207535).
-+ * New source package to ease the 0.7 -> 0.8 transition, each source
-+ package builds corresponding libpcap0.x{,-dev} binary packages. The
-+ libpcap-dev package is provided by libpcap0.7 for now.
-+ * debian/copyright: Rewrite. Licensing information is now complete in
-+ the upstream tarball.
-+ * debian/control:
-+ + Update source and binary package names.
-+ + Build-Depend on dpatch, perl.
-+ + Bump Standards-Version to 3.6.1.0.
-+ * debian/rules:
-+ + Clean up CFLAGS handling.
-+ + Support DEB_BUILD_OPTIONS.
-+ + Use dpatch for patch management.
-+ + Compute major/minor versions from the changelog instead of
-+ hardcoding them.
-+ * debian/patches: New directory.
-+ * debian/patches/10_shared_lib.dpatch: Patch split off the Debian diff
-+ to build a shared library (upstream does not support it).
-+ * debian/patches/20_mac_syntax.dpatch: Patch split off the Debian diff
-+ to support more MAC address syntaxes (by Torsten Landschoff).
-+ * debian/patches/00list: New file (patch list).
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Fri, 30 Apr 2004 16:14:10 +0200
-+
-+libpcap (0.7.2-5) unstable; urgency=low
-+
-+ * debian/rules: Update version variables, this is version 0.7.2.
-+ * Makefile.in: Fix version.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Tue, 11 Nov 2003 12:14:28 +0100
-+
-+libpcap (0.7.2-4) unstable; urgency=low
-+
-+ * debian/libpcap-dev.preinst: New file. Remove old symlink from
-+ /usr/share/doc/libpcap-dev to libpcap0 since we now have a real
-+ libpcap-dev directory. Closes: #175742.
-+ * debian/rules: Add -A flag to dh_installdocs so that it acts on all
-+ binary packages.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Mon, 20 Oct 2003 18:49:22 +0200
-+
-+libpcap (0.7.2-3) unstable; urgency=low
-+
-+ * debian/control: libpcap-dev is in section libdevel, not in section
-+ devel.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Sun, 19 Oct 2003 19:22:12 +0200
-+
-+libpcap (0.7.2-2) unstable; urgency=low
-+
-+ * debian/control:
-+ + Adding myself as co-maintainer, with Torsten's blessing.
-+ + Repeat extended description in libpcap-dev description
-+ (closes: #209728)
-+ + Remove Emacs-style <URL: ...> markers from the descriptions.
-+ (closes: #196727).
-+ + Remove full stops from synopsis as per Policy.
-+ + Add versioned build-dependency on debhelper (>= 4).
-+ * debian/copyright: Remove dh-make boilerplates.
-+ * debian/compat: New file.
-+ * debian/rules: Remove obsolete DH_COMPAT variable.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Sun, 19 Oct 2003 18:17:41 +0200
-+
-+libpcap (0.7.2-1) unstable; urgency=low
-+
-+ * New upstream release.
-+
-+ -- Torsten Landschoff <torsten@debian.org> Sat, 7 Jun 2003 22:57:55 +0200
-+
-+libpcap (0.7.1-1) unstable; urgency=low
-+
-+ * New upstream release (closes: #145538).
-+ * debian/rules: Build the library with _FILE_OFFSET_BITS set to 64
-+ to allow for files bigger than 2GB (closes: #129213).
-+ * Rename the library package to libpcap0.7 and change the SONAME so that we
-+ can account for interface changes (closes: #132359).
-+ * Run ldconfig as appropriate (lintian).
-+ * Remove watch.ex template and the silly symlink from libpcap-dev's
-+ documentation to libpcap0 (lintian).
-+
-+ -- Torsten Landschoff <torsten@debian.org> Sat, 3 Aug 2002 23:33:56 +0200
-+
-+libpcap (0.6.2-2) unstable; urgency=low
-+
-+ * debian/control: Change section of libpcap0 from net to libs
-+ (Debian installer message).
-+ * aclocal.m4: Treat the ia64 as a cpu which can't handle unaligned
-+ memory access (closes: #112152). Thanks for the report go to
-+ John R. Daily.
-+
-+ -- Torsten Landschoff <torsten@debian.org> Fri, 14 Sep 2001 10:15:52 +0200
-+
-+libpcap (0.6.2-1) unstable; urgency=medium
-+
-+ * New upstream release.
-+ * debian/control: Removed Build-Depends already satisfied by the
-+ build-essential package.
-+ * gencode.c (gen_scode): Add the missing default branch of the protocol
-+ family switch (closes: 88688).
-+ * debian/libpcap.post{rm,inst}: Run ldconfig (lintian).
-+ * debian/copyright: Fix the "similiar" typo (lintian).
-+
-+ -- Torsten Landschoff <torsten@debian.org> Tue, 6 Mar 2001 04:27:27 +0100
-+
-+libpcap (0.6.1-2) unstable; urgency=low
-+
-+ * debian/rules: Changed the shlibs info so that only pcap 0.6
-+ is okay for packages linked against this version.
-+
-+ -- Torsten Landschoff <torsten@debian.org> Thu, 18 Jan 2001 01:13:20 +0100
-+
-+libpcap (0.6.1-1) unstable; urgency=low
-+
-+ * Taking back the package. Kudos to Anand for helping out.
-+ * debian/rules: Pass --enable-ipv6 to configure (closes: #80223).
-+
-+ -- Torsten Landschoff <torsten@debian.org> Tue, 16 Jan 2001 15:40:37 +0100
-+
-+libpcap (0.5.2-2) unstable; urgency=low
-+
-+ * Update config.guess and config.sub (Closes #26031)
-+ * Source builds would not always work. Fix that.
-+ * Kernel interface problem is really a module not loaded problem.
-+ Note this in README.Debian. (Closes #21356)
-+
-+ -- Anand Kumria <wildfire@progsoc.org> Tue, 28 Nov 2000 02:03:25 +1100
-+
-+libpcap (0.5.2-1) unstable; urgency=low
-+
-+ * New upstream release
-+ * New maintainer
-+ * Migrate to Debhelper and insert Build-Depends
-+
-+ -- Anand Kumria <wildfire@progsoc.org> Sun, 12 Nov 2000 03:19:44 +1100
-+
-+libpcap (0.4a6-3) unstable; urgency=low
-+
-+ * New maintainer.
-+ * scanner.l: Allow a 12 digit hex number as ether address as well as
-+ BB.BB.BB.BB.BB.BB (closes: #48735)
-+ * nametoaddr.c (pcap_ether_aton): Adjust for change in scanner.l
-+
-+ -- Torsten Landschoff <torsten@debian.org> Mon, 22 Nov 1999 02:39:45 +0100
-+
-+libpcap (0.4a6-2.1) unstable; urgency=low
-+
-+ * Non maintainer upload.
-+ config.{guess,sub} changed to recognize a Arm architecture.
-+
-+ -- Turbo Fredriksson <turbo@debian.org> Thu, 20 Aug 1998 23:12:36 -0400
-+
-+libpcap (0.4a6-2) frozen unstable; urgency=low
-+
-+ * renamed /usr/doc/libpcap to /usr/doc/libpcap0 (should fix several
-+ lintian warnings)
-+ * updated standards-version
-+ * rebuild with latest debmake
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Mon, 30 Mar 1998 00:46:44 +0200
-+
-+
-+libpcap (0.4a6-1) unstable; urgency=low
-+
-+ * upgraded to latest upstream version, fixes: Bug#17164
-+ * added patch from Michael Alan Dorman <mdorman@mdorman.law.miami.edu>
-+ for building libpcap on alpha systems, fixes: Bug#15556
-+ * fixed aclocal.m4 script
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Sat, 31 Jan 1998 23:19:42 +0100
-+
-+
-+libpcap (0.4a2-2) unstable; urgency=low
-+
-+ * fixed detection of IFF_LOOPBACK for linux systems
-+ * link shared library with -l
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Wed, 19 Nov 1997 23:44:34 +0100
-+
-+
-+libpcap (0.4a2-1) unstable; urgency=low
-+
-+ * new maintainer
-+ * latest upstream release
-+ * libc6 version
-+ * compiled with _REENTRANT
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Wed, 17 Sep 1997 20:40:01 +0200
-+
-+
-+libpcap (0.3.1a3-1) unstable; urgency=low
-+
-+ * Latest upstream release. Fixes bug #6670.
-+
-+ -- Karl Sackett <krs@debian.org> Wed, 2 Apr 1997 10:19:28 -0600
-+
-+
-+libpcap (0.3-1) unstable; urgency=low
-+
-+ * First Debian release.
-+ * Makefile.in: supports libpcap.so target.
-+
-+ -- Karl Sackett <krs@debian.org> Wed, 8 Jan 1997 09:38:31 -0600
-+
-+
---- libpcap0.8-0.8.3.orig/debian/rules
-+++ libpcap0.8-0.8.3/debian/rules
-@@ -0,0 +1,81 @@
-+#!/usr/bin/make -f
-+
-+include /usr/share/dpatch/dpatch.make
-+
-+version := $(shell head -1 debian/changelog | \
-+ perl -nle 'm/\S+\s+\((\S+)-\S+\)/ and print $$1')
-+major := $(shell head -1 debian/changelog | perl -nle \
-+ 'm/\S+\s+\((\d\.\d)\.\d+-\S+\)/ and print $$1')
-+
-+export CFLAGS=-D_FILE_OFFSET_BITS=64
-+
-+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-+ CFLAGS += -O0
-+endif
-+
-+build: patch build-stamp
-+build-stamp:
-+ dh_testdir
-+
-+ ./configure --prefix=/usr \
-+ --mandir=\$${prefix}/share/man \
-+ --enable-ipv6 --infodir=\$${prefix}/share/info
-+ $(MAKE)
-+
-+ touch build-stamp
-+
-+clean: clean-patched unpatch
-+clean-patched:
-+ dh_testdir
-+ dh_testroot
-+ rm -f build-stamp
-+
-+ -$(MAKE) distclean
-+
-+ rm -f net
-+
-+ dh_clean
-+
-+install: build
-+ dh_testdir
-+ dh_testroot
-+ dh_clean -k
-+ dh_installdirs
-+
-+ $(MAKE) install prefix=`pwd`/debian/libpcap0.8-dev/usr
-+
-+binary-indep: build install
-+# We have nothing to do by default.
-+
-+binary-arch: build install
-+# dh_testversion
-+ dh_testdir
-+ dh_testroot
-+ #
-+ # build libpcap${major} package by moving files from libpcap0.8-dev
-+ #
-+ dh_movefiles -plibpcap$(major) --sourcedir=debian/libpcap0.8-dev \
-+ usr/lib/libpcap.so.$(major) \
-+ usr/lib/libpcap.so.$(version)
-+
-+# dh_installdebconf
-+ dh_installdocs -A debian/README.Debian
-+ dh_installexamples
-+ dh_installmenu
-+ dh_installmanpages -plibpcap0.8-dev
-+ dh_installinfo
-+# dh_undocumented
-+ dh_installchangelogs CHANGES
-+ dh_link -plibpcap0.8-dev
-+ dh_strip
-+ dh_compress
-+ dh_fixperms
-+ dh_makeshlibs
-+ dh_installdeb
-+ dh_shlibdeps
-+ dh_gencontrol
-+ dh_md5sums
-+ dh_builddeb
-+
-+binary: binary-indep binary-arch
-+.PHONY: build clean binary-indep binary-arch binary install
---- libpcap0.8-0.8.3.orig/debian/patches/10_shared_lib.dpatch
-+++ libpcap0.8-0.8.3/debian/patches/10_shared_lib.dpatch
-@@ -0,0 +1,144 @@
-+#! /bin/sh -e
-+## 10_shared_lib.dpatch by Romain Francoise <rfrancoise@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Debian-specific modifications to the upstream Makefile.in to
-+## DP: build a shared library.
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/libpcap/libpcap0.8/libpcap0.8-0.8.3/Makefile.in libpcap0.8-0.8.3/Makefile.in
-+--- /home/romain/Work/Debian/libpcap/libpcap0.8/libpcap0.8-0.8.3/Makefile.in 2004-04-30 16:40:33.000000000 +0200
-++++ libpcap0.8-0.8.3/Makefile.in 2004-04-30 16:41:43.000000000 +0200
-+@@ -37,6 +37,15 @@
-+ srcdir = @srcdir@
-+ VPATH = @srcdir@
-+
-++# some defines for shared library compilation
-++MAJ=$(shell head -1 debian/changelog | perl -nle 'm/\S+\s+\((\d\.\d)\.\d+-\S+\)/ and print $$1')
-++MIN=$(shell head -1 debian/changelog | perl -nle 'm/\S+\s+\(\d\.\d\.(\d+)-\S+\)/ and print $$1')
-++VERSION=$(MAJ).$(MIN)
-++LIBNAME=pcap
-++LIBRARY=lib$(LIBNAME).a
-++SOLIBRARY=lib$(LIBNAME).so
-++SHAREDLIB=$(SOLIBRARY).$(VERSION)
-++
-+ #
-+ # You shouldn't need to edit anything below.
-+ #
-+@@ -49,6 +58,7 @@
-+
-+ # Standard CFLAGS
-+ CFLAGS = $(CCOPT) $(INCLS) $(DEFS)
-++CFLAGS_SHARED = -shared -Wl,-soname,$(SOLIBRARY).$(MAJ)
-+
-+ INSTALL = @INSTALL@
-+ INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+@@ -68,7 +78,11 @@
-+ # problem if you don't own the file but can write to the directory.
-+ .c.o:
-+ @rm -f $@
-+- $(CC) $(CFLAGS) -c $(srcdir)/$*.c
-++ $(CC) $(CFLAGS) -c -o $@ $(srcdir)/$*.c
-++
-++%_pic.o: %.c
-++ @rm -f $@
-++ $(CC) -fPIC $(CFLAGS) -c -o $@ $(srcdir)/$*.c
-+
-+ PSRC = pcap-@V_PCAP@.c
-+ FSRC = fad-@V_FINDALLDEVS@.c
-+@@ -83,6 +97,7 @@
-+ # We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
-+ # hack the extra indirection
-+ OBJ = $(PSRC:.c=.o) $(FSRC:.c=.o) $(CSRC:.c=.o) $(SSRC:.c=.o) $(GENSRC:.c=.o) $(LIBOBJS)
-++OBJ_PIC = $(PSRC:.c=_pic.o) $(FSRC:.c=_pic.o) $(CSRC:.c=_pic.o) $(SSRC:.c=_pic.o) $(GENSRC:.c=_pic.o)
-+ HDR = pcap.h pcap-int.h pcap-namedb.h pcap-nit.h pcap-pf.h \
-+ ethertype.h gencode.h gnuc.h
-+ GENHDR = \
-+@@ -94,15 +109,22 @@
-+ TAGFILES = \
-+ $(SRC) $(HDR) $(TAGHDR)
-+
-+-CLEANFILES = $(OBJ) libpcap.a $(GENSRC) $(GENHDR) lex.yy.c
-++CLEANFILES = $(OBJ) $(OBJ_PIC) libpcap.a $(GENSRC) $(GENHDR) lex.yy.c libpcap.so*
-+
-+-all: libpcap.a
-++all: libpcap.a $(SHAREDLIB)
-+
-+ libpcap.a: $(OBJ)
-+ @rm -f $@
-+ ar rc $@ $(OBJ) $(LIBS)
-+ $(RANLIB) $@
-+
-++$(SHAREDLIB): $(OBJ_PIC)
-++ -@rm -f $@
-++ -@rm -f $(SOLIBRARY) $(SOLIBRARY).$(MAJ)
-++ $(CC) $(CFLAGS_SHARED) -o $(SHAREDLIB) $(OBJ_PIC) -lc
-++ ln -s $(SHAREDLIB) $(SOLIBRARY).$(MAJ)
-++ ln -s $(SOLIBRARY).$(MAJ) $(SOLIBRARY)
-++
-+ scanner.c: $(srcdir)/scanner.l
-+ @rm -f $@
-+ $(LEX) -t $< > $$$$.$@; mv $$$$.$@ $@
-+@@ -110,6 +132,9 @@
-+ scanner.o: scanner.c tokdefs.h
-+ $(CC) $(CFLAGS) -c scanner.c
-+
-++scanner_pic.o: scanner.c tokdefs.h
-++ $(CC) -fPIC $(CFLAGS) -o $@ -c scanner.c
-++
-+ pcap.o: version.h
-+
-+ tokdefs.h: grammar.c
-+@@ -123,9 +148,17 @@
-+ @rm -f $@
-+ $(CC) $(CFLAGS) -Dyylval=pcap_lval -c grammar.c
-+
-++grammar_pic.o: grammar.c
-++ @rm -f $@
-++ $(CC) -fPIC $(CFLAGS) -Dyylval=pcap_lval -o $@ -c grammar.c
-++
-+ version.o: version.c
-+ $(CC) $(CFLAGS) -c version.c
-+
-++version_pic.o: version.c
-++ $(CC) -fPIC $(CFLAGS) -c version.c -o $@
-++
-++
-+ snprintf.o: $(srcdir)/missing/snprintf.c
-+ $(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/snprintf.c
-+
-+@@ -151,10 +184,16 @@
-+ bpf_filter.o: bpf_filter.c
-+ $(CC) $(CFLAGS) -c bpf_filter.c
-+
-++bpf_filter_pic.o: bpf_filter.c
-++ $(CC) -fPIC $(CFLAGS) -c bpf_filter.c -o $@
-++
-+ install:
-+ [ -d $(DESTDIR)$(libdir) ] || \
-+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
-+ $(INSTALL_DATA) libpcap.a $(DESTDIR)$(libdir)/libpcap.a
-++ $(INSTALL_DATA) $(SHAREDLIB) $(DESTDIR)$(libdir)/
-++ ln -sf $(SHAREDLIB) $(DESTDIR)$(libdir)/$(SOLIBRARY).$(MAJ)
-++ ln -sf $(SOLIBRARY).$(MAJ) $(DESTDIR)$(libdir)/$(SOLIBRARY)
-+ $(RANLIB) $(DESTDIR)$(libdir)/libpcap.a
-+ [ -d $(DESTDIR)$(includedir) ] || \
-+ (mkdir -p $(DESTDIR)$(includedir); chmod 755 $(DESTDIR)$(includedir))
---- libpcap0.8-0.8.3.orig/debian/patches/20_mac_syntax.dpatch
-+++ libpcap0.8-0.8.3/debian/patches/20_mac_syntax.dpatch
-@@ -0,0 +1,68 @@
-+#! /bin/sh -e
-+## 20_mac_syntax.dpatch by Torsten Landschoff <torsten@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Adds more possible syntaxes to input MAC addresses:
-+## DP: - the nn.nn.nn.nn.nn.nn syntax
-+## DP: - the hexadecimal syntax
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/libpcap/libpcap0.8/libpcap0.8-0.8.3/nametoaddr.c libpcap0.8-0.8.3/nametoaddr.c
-+--- /home/romain/Work/Debian/libpcap/libpcap0.8/libpcap0.8-0.8.3/nametoaddr.c 2004-04-30 15:45:14.000000000 +0200
-++++ libpcap0.8-0.8.3/nametoaddr.c 2004-04-30 15:57:54.000000000 +0200
-+@@ -333,7 +333,7 @@
-+ e = ep = (u_char *)malloc(6);
-+
-+ while (*s) {
-+- if (*s == ':')
-++ if (*s == ':' || *s == '.')
-+ s += 1;
-+ d = xdtoi(*s++);
-+ if (isxdigit((unsigned char)*s)) {
-+diff -urNad /home/romain/Work/Debian/libpcap/libpcap0.8/libpcap0.8-0.8.3/scanner.l libpcap0.8-0.8.3/scanner.l
-+--- /home/romain/Work/Debian/libpcap/libpcap0.8/libpcap0.8-0.8.3/scanner.l 2004-04-30 15:45:14.000000000 +0200
-++++ libpcap0.8-0.8.3/scanner.l 2004-04-30 15:57:54.000000000 +0200
-+@@ -80,6 +80,7 @@
-+ N ([0-9]+|(0X|0x)[0-9A-Fa-f]+)
-+ B ([0-9A-Fa-f][0-9A-Fa-f]?)
-+ W ([0-9A-Fa-f][0-9A-Fa-f]?[0-9A-Fa-f]?[0-9A-Fa-f]?)
-++X [0-9A-Fa-f]
-+
-+ %a 16000
-+ %o 19000
-+@@ -296,7 +297,7 @@
-+ {N} { yylval.i = stoi((char *)yytext); return NUM; }
-+ ({N}\.{N})|({N}\.{N}\.{N})|({N}\.{N}\.{N}\.{N}) {
-+ yylval.s = sdup((char *)yytext); return HID; }
-+-{B}:{B}:{B}:{B}:{B}:{B} { yylval.e = pcap_ether_aton((char *)yytext);
-++({B}:{B}:{B}:{B}:{B}:{B})|({B}\.{B}\.{B}\.{B}\.{B}\.{B}) { yylval.e = pcap_ether_aton((char *)yytext);
-+ return EID; }
-+ {V6} {
-+ #ifdef INET6
-+@@ -314,6 +315,8 @@
-+ #endif /*INET6*/
-+ }
-+ {B}:+({B}:+)+ { bpf_error("bogus ethernet address %s", yytext); }
-++{X}{12} { yylval.e = pcap_ether_aton((char *)yytext); return EID;}
-++
-+ icmptype { yylval.i = 0; return NUM; }
-+ icmpcode { yylval.i = 1; return NUM; }
-+ icmp-echoreply { yylval.i = 0; return NUM; }
---- libpcap0.8-0.8.3.orig/debian/patches/00list
-+++ libpcap0.8-0.8.3/debian/patches/00list
-@@ -0,0 +1,3 @@
-+10_shared_lib
-+20_mac_syntax
-+30_man_fixes
---- libpcap0.8-0.8.3.orig/debian/patches/30_man_fixes.dpatch
-+++ libpcap0.8-0.8.3/debian/patches/30_man_fixes.dpatch
-@@ -0,0 +1,57 @@
-+#! /bin/sh -e
-+## 30_man_fixes.dpatch by Romain Francoise <rfrancoise@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Misc. fixes to the upstream man page.
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/libpcap0.8/libpcap0.8-0.8.3/pcap.3 libpcap0.8-0.8.3/pcap.3
-+--- /home/romain/Work/Debian/libpcap0.8/libpcap0.8-0.8.3/pcap.3 2004-07-21 19:41:53.000000000 +0200
-++++ libpcap0.8-0.8.3/pcap.3 2004-07-21 19:42:28.000000000 +0200
-+@@ -201,7 +201,7 @@
-+ .I fname
-+ specifies the name of the file to open. The file has
-+ the same format as those used by
-+-.B tcpdump(1)
-++.B tcpdump(8)
-+ and
-+ .BR tcpslice(1) .
-+ The name "-" in a synonym for
-+@@ -404,7 +404,9 @@
-+ live capture, or all the packets in the file when reading a
-+ ``savefile''.
-+ .I callback
-+-specifies a routine to be called with three arguments:
-++specifies a
-++.I pcap_handler
-++routine to be called with three arguments:
-+ a
-+ .I u_char
-+ pointer which is passed in from
-+@@ -1168,7 +1170,7 @@
-+ closes the ``savefile.''
-+ .PP
-+ .SH SEE ALSO
-+-tcpdump(1), tcpslice(1)
-++tcpdump(8), tcpslice(1)
-+ .SH AUTHORS
-+ The original authors are:
-+ .LP
---- libpcap0.8-0.8.3.orig/debian/README.Debian
-+++ libpcap0.8-0.8.3/debian/README.Debian
-@@ -0,0 +1,13 @@
-+libpcap for Debian
-+------------------
-+
-+ If you receive messages telling you the packet type is not supported
-+ or is deprecated check that CONFIG_PACKET is set to either `Y' or `M'.
-+
-+ You should also check that /etc/modules.conf has the line
-+
-+ alias net-pf-17 af_packet
-+
-+ Feel free to report bugs.
-+
-+ -- Anand Kumria <wildfire@progsoc.org>, Tue, 28 Nov 2000 02:04:28 EST
---- libpcap0.8-0.8.3.orig/debian/libpcap0.8-dev.preinst
-+++ libpcap0.8-0.8.3/debian/libpcap0.8-dev.preinst
-@@ -0,0 +1,9 @@
-+#!/bin/sh
-+set -e
-+
-+# Remove old symlink, if it exists
-+if [ -L /usr/share/doc/libpcap-dev ]; then
-+ rm -f /usr/share/doc/libpcap-dev ;
-+fi
-+
-+#DEBHELPER#
---- libpcap0.8-0.8.3.orig/debian/libpcap0.8.postinst
-+++ libpcap0.8-0.8.3/debian/libpcap0.8.postinst
-@@ -0,0 +1,8 @@
-+#! /bin/sh
-+
-+if [ "$1" = "configure" ]; then
-+ ldconfig
-+fi
-+
-+#DEBHELPER#
-+
---- libpcap0.8-0.8.3.orig/debian/libpcap0.8-dev.dirs
-+++ libpcap0.8-0.8.3/debian/libpcap0.8-dev.dirs
-@@ -0,0 +1,3 @@
-+usr/lib
-+usr/include
-+usr/share/man/man3
---- libpcap0.8-0.8.3.orig/debian/libpcap0.8.docs
-+++ libpcap0.8-0.8.3/debian/libpcap0.8.docs
-@@ -0,0 +1,2 @@
-+README
-+CREDITS
---- libpcap0.8-0.8.3.orig/debian/libpcap0.8.postrm
-+++ libpcap0.8-0.8.3/debian/libpcap0.8.postrm
-@@ -0,0 +1,8 @@
-+#! /bin/sh
-+
-+if [ "$1" = "remove" ]; then
-+ ldconfig
-+fi
-+
-+#DEBHELPER#
-+
+++ /dev/null
-diff -ruN matrixssl-1.1.2-old/src/Makefile matrixssl-1.1.2-new/src/Makefile
---- matrixssl-1.1.2-old/src/Makefile 2004-06-10 21:03:25.000000000 +0200
-+++ matrixssl-1.1.2-new/src/Makefile 2004-07-09 22:58:06.000000000 +0200
-@@ -46,8 +46,8 @@
- # Compile options
- #
- SHARED = -shared
--CFLAGS = $(DFLAGS) -DLINUX
--LDFLAGS = -nostdlib -lc -lpthread
-+CFLAGS = $(DFLAGS) -DLINUX -fPIC
-+LDFLAGS = -lc -lpthread -Wl,-soname,libmatrixssl.so.1.2
-
- #
- # Override variables for compilation on Mac OS X (Darwin)
+++ /dev/null
-diff -ruN matrixssl-1.2.1-old/examples/Makefile matrixssl-1.2.1-new/examples/Makefile
---- matrixssl-1.2.1-old/examples/Makefile 2004-06-05 00:45:21.000000000 +0200
-+++ matrixssl-1.2.1-new/examples/Makefile 2004-08-19 04:01:29.000000000 +0200
-@@ -34,7 +34,7 @@
- # Compile options
- #
- CFLAGS = $(DFLAGS) -DLINUX
--LDFLAGS = -lc
-+LDFLAGS = -lc -lpthread
-
- #
- # Override variables for compilation on Mac OS X (Darwin)
+++ /dev/null
-diff -ruN ppp-2.4.2/TODO ppp-cvs-20040427/TODO
---- ppp-2.4.2/TODO 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/TODO 1999-03-22 07:38:09.000000000 +0100
-@@ -0,0 +1,16 @@
-+* Things to do *
-+
-+- How should we handle the case where MTU > MRU?
-+ Should we reduce the IP MTU to the link MRU (so TCP MSS is correct)?
-+
-+- Provide ways to:
-+ + set the IP address, possibly based on the peer's identity
-+ + have external checking of PAP user/password, CHAP response
-+ + supply the PAP user/password, CHAP secret
-+ + decide which tty to use (locking, DTR issues)
-+
-+- Integrate callback stuff?
-+
-+- Implement link quality monitoring
-+
-+- Implement other network control protocols
-diff -ruN ppp-2.4.2/chat/chat.c ppp-cvs-20040427/chat/chat.c
---- ppp-2.4.2/chat/chat.c 2003-03-30 10:23:48.000000000 +0200
-+++ ppp-cvs-20040427/chat/chat.c 2004-01-17 06:50:11.000000000 +0100
-@@ -87,7 +87,7 @@
- #endif
-
- #ifndef lint
--static const char rcsid[] = "$Id: chat.c,v 1.29 2003/03/04 06:17:21 fcusack Exp $";
-+static const char rcsid[] = "$Id: chat.c,v 1.30 2004/01/17 05:47:55 carlsonj Exp $";
- #endif
-
- #include <stdio.h>
-@@ -213,7 +213,7 @@
- void *copy_of __P((char *s));
- char *grow __P((char *s, char **p, size_t len));
- void usage __P((void));
--void logf __P((const char *fmt, ...));
-+void msgf __P((const char *fmt, ...));
- void fatal __P((int code, const char *fmt, ...));
- SIGTYPE sigalrm __P((int signo));
- SIGTYPE sigint __P((int signo));
-@@ -495,7 +495,7 @@
- /*
- * Send a message to syslog and/or stderr.
- */
--void logf __V((const char *fmt, ...))
-+void msgf __V((const char *fmt, ...))
- {
- va_list args;
-
-@@ -558,7 +558,7 @@
- fatal(2, "Can't set file mode flags on stdin: %m");
-
- if (verbose)
-- logf("alarm");
-+ msgf("alarm");
- }
-
- void unalarm()
-@@ -1001,9 +1001,9 @@
- * The expectation did not occur. This is terminal.
- */
- if (fail_reason)
-- logf("Failed (%s)", fail_reason);
-+ msgf("Failed (%s)", fail_reason);
- else
-- logf("Failed");
-+ msgf("Failed");
- terminate(exit_code);
- }
-
-@@ -1079,7 +1079,7 @@
- abort_string[n_aborts++] = s1;
-
- if (verbose)
-- logf("abort on (%v)", s);
-+ msgf("abort on (%v)", s);
- return;
- }
-
-@@ -1105,7 +1105,7 @@
- pack++;
- n_aborts--;
- if (verbose)
-- logf("clear abort on (%v)", s);
-+ msgf("clear abort on (%v)", s);
- }
- }
- free(s1);
-@@ -1129,7 +1129,7 @@
- report_string[n_reports++] = s1;
-
- if (verbose)
-- logf("report (%v)", s);
-+ msgf("report (%v)", s);
- return;
- }
-
-@@ -1155,7 +1155,7 @@
- pack++;
- n_reports--;
- if (verbose)
-- logf("clear report (%v)", s);
-+ msgf("clear report (%v)", s);
- }
- }
- free(s1);
-@@ -1173,7 +1173,7 @@
- timeout = DEFAULT_CHAT_TIMEOUT;
-
- if (verbose)
-- logf("timeout set to %d seconds", timeout);
-+ msgf("timeout set to %d seconds", timeout);
-
- return;
- }
-@@ -1236,7 +1236,7 @@
- return ((int)c & 0x7F);
-
- default:
-- logf("warning: read() on stdin returned %d", status);
-+ msgf("warning: read() on stdin returned %d", status);
-
- case -1:
- if ((status = fcntl(0, F_GETFL, 0)) == -1)
-@@ -1264,7 +1264,7 @@
- return (0);
-
- default:
-- logf("warning: write() on stdout returned %d", status);
-+ msgf("warning: write() on stdout returned %d", status);
-
- case -1:
- if ((status = fcntl(0, F_GETFL, 0)) == -1)
-@@ -1286,9 +1286,9 @@
-
- if (verbose) {
- if (errno == EINTR || errno == EWOULDBLOCK)
-- logf(" -- write timed out");
-+ msgf(" -- write timed out");
- else
-- logf(" -- write failed: %m");
-+ msgf(" -- write failed: %m");
- }
- return (0);
- }
-@@ -1303,9 +1303,9 @@
-
- if (verbose) {
- if (quiet)
-- logf("send (??????)");
-+ msgf("send (??????)");
- else
-- logf("send (%v)", s);
-+ msgf("send (%v)", s);
- }
-
- alarm(timeout); alarmed = 0;
-@@ -1392,17 +1392,17 @@
- minlen = (len > sizeof(fail_buffer)? len: sizeof(fail_buffer)) - 1;
-
- if (verbose)
-- logf("expect (%v)", string);
-+ msgf("expect (%v)", string);
-
- if (len > STR_LEN) {
-- logf("expect string is too long");
-+ msgf("expect string is too long");
- exit_code = 1;
- return 0;
- }
-
- if (len == 0) {
- if (verbose)
-- logf("got it");
-+ msgf("got it");
- return (1);
- }
-
-@@ -1416,16 +1416,16 @@
- echo_stderr(c);
- if (verbose && c == '\n') {
- if (s == logged)
-- logf(""); /* blank line */
-+ msgf(""); /* blank line */
- else
-- logf("%0.*v", s - logged, logged);
-+ msgf("%0.*v", s - logged, logged);
- logged = s + 1;
- }
-
- *s++ = c;
-
- if (verbose && s >= logged + 80) {
-- logf("%0.*v", s - logged, logged);
-+ msgf("%0.*v", s - logged, logged);
- logged = s;
- }
-
-@@ -1470,8 +1470,8 @@
- strncmp(s - len, string, len) == 0) {
- if (verbose) {
- if (s > logged)
-- logf("%0.*v", s - logged, logged);
-- logf(" -- got it\n");
-+ msgf("%0.*v", s - logged, logged);
-+ msgf(" -- got it\n");
- }
-
- alarm(0);
-@@ -1484,8 +1484,8 @@
- strncmp(s - abort_len, abort_string[n], abort_len) == 0) {
- if (verbose) {
- if (s > logged)
-- logf("%0.*v", s - logged, logged);
-- logf(" -- failed");
-+ msgf("%0.*v", s - logged, logged);
-+ msgf(" -- failed");
- }
-
- alarm(0);
-@@ -1499,7 +1499,7 @@
- if (s >= end) {
- if (logged < s - minlen) {
- if (verbose)
-- logf("%0.*v", s - logged, logged);
-+ msgf("%0.*v", s - logged, logged);
- logged = s;
- }
- s -= minlen;
-@@ -1509,16 +1509,16 @@
- }
-
- if (alarmed && verbose)
-- logf("warning: alarm synchronization problem");
-+ msgf("warning: alarm synchronization problem");
- }
-
- alarm(0);
-
- if (verbose && printed) {
- if (alarmed)
-- logf(" -- read timed out");
-+ msgf(" -- read timed out");
- else
-- logf(" -- read failed: %m");
-+ msgf(" -- read failed: %m");
- }
-
- exit_code = 3;
-diff -ruN ppp-2.4.2/configure ppp-cvs-20040427/configure
---- ppp-2.4.2/configure 2002-11-09 12:24:41.000000000 +0100
-+++ ppp-cvs-20040427/configure 2004-01-17 06:50:11.000000000 +0100
-@@ -1,5 +1,5 @@
- #!/bin/sh
--# $Id: configure,v 1.30 2002/11/02 19:48:12 carlsonj Exp $
-+# $Id: configure,v 1.31 2004/01/17 05:47:55 carlsonj Exp $
-
- # if [ -d /NextApps ]; then
- # system="NeXTStep"
-@@ -27,7 +27,7 @@
- esac;;
- 5.[1-6]*) state="known"; ksrc="solaris"; makext="sol2";;
- esac
-- if [ -x /opt/SUNWspro/bin/cc ] &&
-+ if [ -x /opt/SUNWspro/bin/cc -a "$1" != "gcc" ] &&
- /opt/SUNWspro/bin/cc -flags >/dev/null 2>&1; then
- : # use Sun WorkShop compiler
- elif gcc --version >/dev/null 2>&1; then
-diff -ruN ppp-2.4.2/contrib/pppgetpass/Makefile.linux ppp-cvs-20040427/contrib/pppgetpass/Makefile.linux
---- ppp-2.4.2/contrib/pppgetpass/Makefile.linux 1999-11-15 05:08:24.000000000 +0100
-+++ ppp-cvs-20040427/contrib/pppgetpass/Makefile.linux 1970-01-01 01:00:00.000000000 +0100
-@@ -1,16 +0,0 @@
--all: pppgetpass.vt pppgetpass.gtk
--
--pppgetpass.vt: pppgetpass.vt.o
--
--pppgetpass.gtk: pppgetpass.gtk.o
-- $(CC) $(LDFLAGS) pppgetpass.gtk.o `gtk-config --libs` -o pppgetpass.gtk
--pppgetpass.gtk.o: pppgetpass.gtk.c
-- $(CC) $(CFLAGS) -c pppgetpass.gtk.c `gtk-config --cflags`
--
--install: all
-- install -m 755 pppgetpass.sh /usr/bin/pppgetpass
-- install -m 4755 -o root -g root pppgetpass.vt /usr/bin/
-- install -m 755 -o root -g root pppgetpass.gtk /usr/X11/bin/
--
--clean:
-- rm -f *.o pppgetpass.gtk pppgetpass.vt core
-diff -ruN ppp-2.4.2/contrib/pppgetpass/pppgetpass.8 ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.8
---- ppp-2.4.2/contrib/pppgetpass/pppgetpass.8 1999-11-15 05:08:24.000000000 +0100
-+++ ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.8 1970-01-01 01:00:00.000000000 +0100
-@@ -1,18 +0,0 @@
--.TH PPPGETPASS 8 "26 Sep 1999"
--.SH NAME
--pppgetpass \- prompt for PAP password
--.SH SYNOPSIS
--.B pppgetpass
--.I client server fd
--.SH DESCRIPTION
--.B pppgetpass
--the outer half of a plugin for PAP password prompting in pppd.
--If the peer requires PAP, and the
--.B passprompt.so
--plugin is loaded into pppd, it will run
--.B /usr/sbin/pppgetpass
--(or another program specified by the
--.B promptprog
--option) to prompt the user for the password.
--.SH SEE ALSO
--pppd(8)
-diff -ruN ppp-2.4.2/contrib/pppgetpass/pppgetpass.gtk.c ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.gtk.c
---- ppp-2.4.2/contrib/pppgetpass/pppgetpass.gtk.c 1999-11-15 05:08:24.000000000 +0100
-+++ ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.gtk.c 1970-01-01 01:00:00.000000000 +0100
-@@ -1,92 +0,0 @@
--#include <glib.h>
--#include <gdk/gdk.h>
--#include <gtk/gtkwindow.h>
--#include <gtk/gtkmain.h>
--#include <gtk/gtkbutton.h>
--#include <gtk/gtkvbox.h>
--#include <gtk/gtklabel.h>
--#include <gtk/gtkentry.h>
--#include <gtk/gtksignal.h>
--
--#include <stdio.h>
--#include <string.h>
--#include <stdlib.h>
--#include <unistd.h>
--#include <syslog.h>
--
--int outfd;
--int err;
--
--static void okpressed(void *widget, void *clientdata)
--{
-- GtkWidget *answer=clientdata;
-- gchar *pass;
-- int passlen;
-- ssize_t wrote;
-- (void)widget;
--
-- pass=gtk_entry_get_text(GTK_ENTRY(answer));
--
-- passlen=strlen(pass);
-- if(!passlen)
-- return;
--
-- if((wrote=write(outfd, pass, passlen))!=passlen) {
-- if(wrote<0)
-- syslog(LOG_ERR, "write error on outpipe: %m");
-- else
-- syslog(LOG_ERR, "short write on outpipe");
-- err=1;
-- }
-- gtk_main_quit();
--}
--
--int main(int argc, char **argv)
--{
-- GtkWidget *mainwindow, *vbox, *question, *answer, *ok;
-- char buf[1024];
-- gtk_init(&argc, &argv);
--
-- openlog(argv[0], LOG_PID, LOG_DAEMON);
-- if(argc!=4) {
-- syslog(LOG_WARNING, "Usage error");
-- return 1;
-- }
-- outfd=atoi(argv[3]);
-- mainwindow=gtk_window_new(GTK_WINDOW_TOPLEVEL);
-- gtk_window_set_title(GTK_WINDOW(mainwindow), "pppgetpass");
-- gtk_signal_connect(GTK_OBJECT(mainwindow), "destroy",
-- GTK_SIGNAL_FUNC(gtk_main_quit), 0);
--
-- vbox=gtk_vbox_new(FALSE, 5);
-- gtk_container_add(GTK_CONTAINER(mainwindow), vbox);
-- gtk_widget_show(vbox);
--
-- if(argv[1][0] && argv[2][0])
-- snprintf(buf, sizeof buf, "Password for PPP client %s on server %s: ", argv[1], argv[2]);
-- else if(argv[1][0] && !argv[2][0])
-- snprintf(buf, sizeof buf, "Password for PPP client %s: ", argv[1]);
-- else if(!argv[1][0] && argv[2][0])
-- snprintf(buf, sizeof buf, "Password for PPP on server %s: ", argv[2]);
-- else
-- snprintf(buf, sizeof buf, "Enter PPP password: ");
-- question=gtk_label_new(buf);
-- gtk_box_pack_start(GTK_BOX(vbox), question, FALSE, TRUE, 0);
-- gtk_widget_show(question);
--
-- answer=gtk_entry_new();
-- gtk_entry_set_visibility(GTK_ENTRY(answer), 0);
-- gtk_box_pack_start(GTK_BOX(vbox), answer, FALSE, TRUE, 0);
-- gtk_widget_show(answer);
--
-- ok=gtk_button_new_with_label("OK");
-- gtk_box_pack_start(GTK_BOX(vbox), ok, FALSE, TRUE, 0);
-- gtk_signal_connect(GTK_OBJECT(ok), "clicked",
-- GTK_SIGNAL_FUNC(okpressed), answer);
-- gtk_widget_show(ok);
--
-- gtk_widget_show(mainwindow);
-- gtk_main();
--
-- return err;
--}
-diff -ruN ppp-2.4.2/contrib/pppgetpass/pppgetpass.sh ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.sh
---- ppp-2.4.2/contrib/pppgetpass/pppgetpass.sh 1999-11-15 05:08:24.000000000 +0100
-+++ ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.sh 1970-01-01 01:00:00.000000000 +0100
-@@ -1,7 +0,0 @@
--#!/bin/sh
--
--if [ -z "$DISPLAY" ]; then
-- exec pppgetpass.vt "$@"
--else
-- exec pppgetpass.gtk "$@"
--fi
-diff -ruN ppp-2.4.2/contrib/pppgetpass/pppgetpass.vt.c ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.vt.c
---- ppp-2.4.2/contrib/pppgetpass/pppgetpass.vt.c 1999-11-15 05:08:24.000000000 +0100
-+++ ppp-cvs-20040427/contrib/pppgetpass/pppgetpass.vt.c 1970-01-01 01:00:00.000000000 +0100
-@@ -1,218 +0,0 @@
--#include <stdio.h>
--#include <string.h>
--#include <stdlib.h>
--#include <errno.h>
--#include <unistd.h>
--#include <fcntl.h>
--#include <sys/stat.h>
--#include <sys/ioctl.h>
--#include <syslog.h>
--#include <termios.h>
--#include <sys/vt.h>
--
--static int console_owner(uid_t, int);
--
--int main(int argc, char **argv)
--{
-- int console;
-- uid_t uid;
-- struct vt_stat origstate;
-- int openvtnum;
-- char openvtname[256];
-- int openvt;
-- gid_t gid;
-- int chowned;
-- FILE *fp;
-- struct termios t;
-- char pass[256], *nl;
-- int outfd, passlen;
-- ssize_t wrote;
-- console=open("/dev/console", O_RDWR);
--
-- uid=getuid();
-- gid=getgid();
-- seteuid(uid);
--
-- openlog(argv[0], LOG_PID, LOG_DAEMON);
--
-- if(argc!=4) {
-- syslog(LOG_WARNING, "Usage error");
-- return 1;
-- }
--
-- if(console<0) {
-- syslog(LOG_ERR, "open(/dev/console): %m");
-- return 1;
-- }
--
-- if(ioctl(console, VT_GETSTATE, &origstate)<0) {
-- syslog(LOG_ERR, "VT_GETSTATE: %m");
-- return 1;
-- }
--
-- if(uid) {
-- if(!console_owner(uid, origstate.v_active)) {
-- int i;
-- for(i=0;i<64;++i) {
-- if(i!=origstate.v_active && console_owner(uid, i))
-- break;
-- }
-- if(i==64) {
-- syslog(LOG_WARNING, "run by uid %lu not at console", (unsigned long)uid);
-- return 1;
-- }
-- }
-- }
--
-- if(ioctl(console, VT_OPENQRY, &openvtnum)<0) {
-- syslog(LOG_ERR, "VT_OPENQRY: %m");
-- return 1;
-- }
-- if(openvtnum==-1) {
-- syslog(LOG_ERR, "No free VTs");
-- return 1;
-- }
--
-- snprintf(openvtname, sizeof openvtname, "/dev/tty%d", openvtnum);
-- seteuid(0);
-- openvt=open(openvtname, O_RDWR);
-- if(openvt<0) {
-- seteuid(uid);
-- syslog(LOG_ERR, "open(%s): %m", openvtname);
-- return 1;
-- }
--
-- chowned=fchown(openvt, uid, gid);
-- if(chowned<0) {
-- seteuid(uid);
-- syslog(LOG_ERR, "fchown(%s): %m", openvtname);
-- return 1;
-- }
--
-- close(console);
--
-- if(ioctl(openvt, VT_ACTIVATE, openvtnum)<0) {
-- seteuid(uid);
-- syslog(LOG_ERR, "VT_ACTIVATE(%d): %m", openvtnum);
-- return 1;
-- }
--
-- while(ioctl(openvt, VT_WAITACTIVE, openvtnum)<0) {
-- if(errno!=EINTR) {
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "VT_WAITACTIVE(%d): %m", openvtnum);
-- return 1;
-- }
-- }
--
-- seteuid(uid);
-- fp=fdopen(openvt, "r+");
-- if(!fp) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "fdopen(%s): %m", openvtname);
-- return 1;
-- }
--
-- if(tcgetattr(openvt, &t)<0) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "tcgetattr(%s): %m", openvtname);
-- return 1;
-- }
-- t.c_lflag &= ~ECHO;
-- if(tcsetattr(openvt, TCSANOW, &t)<0) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "tcsetattr(%s): %m", openvtname);
-- return 1;
-- }
--
-- if(fprintf(fp, "\033[2J\033[H")<0) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "write error on %s: %m", openvtname);
-- return 1;
-- }
-- if(argv[1][0] && argv[2][0]) {
-- if(fprintf(fp, "Password for PPP client %s on server %s: ", argv[1], argv[2])<0) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "write error on %s: %m", openvtname);
-- return 1;
-- }
-- } else if(argv[1][0] && !argv[2][0]) {
-- if(fprintf(fp, "Password for PPP client %s: ", argv[1])<0) {
-- syslog(LOG_ERR, "write error on %s: %m", openvtname);
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- return 1;
-- }
-- } else if(!argv[1][0] && argv[2][0]) {
-- if(fprintf(fp, "Password for PPP on server %s: ", argv[2])<0) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "write error on %s: %m", openvtname);
-- return 1;
-- }
-- } else {
-- if(fprintf(fp, "Enter PPP password: ")<0) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- syslog(LOG_ERR, "write error on %s: %m", openvtname);
-- return 1;
-- }
-- }
--
-- if(!fgets(pass, sizeof pass, fp)) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- if(ferror(fp)) {
-- syslog(LOG_ERR, "read error on %s: %m", openvtname);
-- }
-- return 1;
-- }
-- if((nl=strchr(pass, '\n')))
-- *nl=0;
-- passlen=strlen(pass);
--
-- outfd=atoi(argv[3]);
-- if((wrote=write(outfd, pass, passlen))!=passlen) {
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- if(wrote<0)
-- syslog(LOG_ERR, "write error on outpipe: %m");
-- else
-- syslog(LOG_ERR, "short write on outpipe");
-- return 1;
-- }
--
-- seteuid(0);
-- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-- seteuid(uid);
-- return 0;
--}
--
--static int console_owner(uid_t uid, int cons)
--{
-- char name[256];
-- struct stat st;
-- snprintf(name, sizeof name, "/dev/tty%d", cons);
-- if(stat(name, &st)<0) {
-- if(errno!=ENOENT)
-- syslog(LOG_ERR, "stat(%s): %m", name);
-- return 0;
-- }
-- return uid==st.st_uid;
--}
-diff -ruN ppp-2.4.2/include/linux/if_ether.h ppp-cvs-20040427/include/linux/if_ether.h
---- ppp-2.4.2/include/linux/if_ether.h 2001-05-21 05:31:50.000000000 +0200
-+++ ppp-cvs-20040427/include/linux/if_ether.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,99 +0,0 @@
--/*
-- * INET An implementation of the TCP/IP protocol suite for the LINUX
-- * operating system. INET is implemented using the BSD Socket
-- * interface as the means of communication with the user level.
-- *
-- * Global definitions for the Ethernet IEEE 802.3 interface.
-- *
-- * Version: @(#)if_ether.h 1.0.1a 02/08/94
-- *
-- * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
-- * Donald Becker, <becker@super.org>
-- * Alan Cox, <alan@redhat.com>
-- * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License
-- * as published by the Free Software Foundation; either version
-- * 2 of the License, or (at your option) any later version.
-- */
--
--#ifndef _LINUX_IF_ETHER_H
--#define _LINUX_IF_ETHER_H
--
--/*
-- * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
-- * and FCS/CRC (frame check sequence).
-- */
--
--#define ETH_ALEN 6 /* Octets in one ethernet addr */
--#define ETH_HLEN 14 /* Total octets in header. */
--#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
--#define ETH_DATA_LEN 1500 /* Max. octets in payload */
--#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
--
--/*
-- * These are the defined Ethernet Protocol ID's.
-- */
--
--#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
--#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
--#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
--#define ETH_P_IP 0x0800 /* Internet Protocol packet */
--#define ETH_P_X25 0x0805 /* CCITT X.25 */
--#define ETH_P_ARP 0x0806 /* Address Resolution packet */
--#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
--#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
--#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
--#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
--#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
--#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
--#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
--#define ETH_P_LAT 0x6004 /* DEC LAT */
--#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
--#define ETH_P_CUST 0x6006 /* DEC Customer use */
--#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
--#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
--#define ETH_P_ATALK 0x809B /* Appletalk DDP */
--#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
--#define ETH_P_IPX 0x8137 /* IPX over DIX */
--#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
--#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
--#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
--#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
--#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
-- * over Ethernet
-- */
--
--/*
-- * Non DIX types. Won't clash for 1500 types.
-- */
--
--#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
--#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
--#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
--#define ETH_P_802_2 0x0004 /* 802.2 frames */
--#define ETH_P_SNAP 0x0005 /* Internal only */
--#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
--#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
--#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
--#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
--#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
--#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
--#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
--#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
--#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
--#define ETH_P_ECONET 0x0018 /* Acorn Econet */
--
--/*
-- * This is an Ethernet frame header.
-- */
--
--struct ethhdr
--{
-- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
-- unsigned char h_source[ETH_ALEN]; /* source ether addr */
-- unsigned short h_proto; /* packet type ID field */
--};
--
--#endif /* _LINUX_IF_ETHER_H */
-diff -ruN ppp-2.4.2/include/pcap-int.h ppp-cvs-20040427/include/pcap-int.h
---- ppp-2.4.2/include/pcap-int.h 2000-08-01 03:37:24.000000000 +0200
-+++ ppp-cvs-20040427/include/pcap-int.h 2000-08-01 03:37:24.000000000 +0200
-@@ -30,7 +30,7 @@
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
-- * @(#) $Header: /data/cvs/ppp/include/pcap-int.h,v 1.1 2000/08/01 01:37:24 paulus Exp $ (LBL)
-+ * @(#) $Header: /cvsroot/ppp/include/pcap-int.h,v 1.1 2000/08/01 01:37:24 paulus Exp $ (LBL)
- */
-
- #ifndef pcap_int_h
-diff -ruN ppp-2.4.2/modules/bsd-comp.c ppp-cvs-20040427/modules/bsd-comp.c
---- ppp-2.4.2/modules/bsd-comp.c 1998-03-19 06:59:01.000000000 +0100
-+++ ppp-cvs-20040427/modules/bsd-comp.c 2004-01-17 06:50:11.000000000 +0100
-@@ -41,7 +41,7 @@
- * This version is for use with STREAMS under SunOS 4.x,
- * Digital UNIX, AIX 4.x, and SVR4 systems including Solaris 2.
- *
-- * $Id: bsd-comp.c,v 1.20 1996/08/28 06:31:57 paulus Exp $
-+ * $Id: bsd-comp.c,v 1.21 2004/01/17 05:47:55 carlsonj Exp $
- */
-
- #ifdef AIX4
-@@ -66,6 +66,10 @@
- #define BSD_LITTLE_ENDIAN
- #endif
-
-+#ifdef SOL2
-+#include <sys/sunddi.h>
-+#endif
-+
- #define PACKETPTR mblk_t *
- #include <net/ppp-comp.h>
-
-diff -ruN ppp-2.4.2/modules/deflate.c ppp-cvs-20040427/modules/deflate.c
---- ppp-2.4.2/modules/deflate.c 2002-12-06 10:49:15.000000000 +0100
-+++ ppp-cvs-20040427/modules/deflate.c 2004-01-17 06:50:11.000000000 +0100
-@@ -35,7 +35,7 @@
- * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
-- * $Id: deflate.c,v 1.11 2002/12/06 09:49:15 paulus Exp $
-+ * $Id: deflate.c,v 1.12 2004/01/17 05:47:55 carlsonj Exp $
- */
-
- #ifdef AIX4
-@@ -56,6 +56,10 @@
- #include "../common/zlib.h"
- #endif
-
-+#ifdef SOL2
-+#include <sys/sunddi.h>
-+#endif
-+
- #if DO_DEFLATE
-
- #define DEFLATE_DEBUG 1
-diff -ruN ppp-2.4.2/modules/vjcompress.c ppp-cvs-20040427/modules/vjcompress.c
---- ppp-2.4.2/modules/vjcompress.c 1999-09-17 04:03:56.000000000 +0200
-+++ ppp-cvs-20040427/modules/vjcompress.c 2004-01-17 06:50:11.000000000 +0100
-@@ -29,7 +29,7 @@
- * This version is used under SunOS 4.x, Digital UNIX, AIX 4.x,
- * and SVR4 systems including Solaris 2.
- *
-- * $Id: vjcompress.c,v 1.10 1999/09/15 23:49:06 masputra Exp $
-+ * $Id: vjcompress.c,v 1.11 2004/01/17 05:47:55 carlsonj Exp $
- */
-
- #include <sys/types.h>
-@@ -56,6 +56,10 @@
- #include <netinet/in_systm.h>
- #endif
-
-+#ifdef SOL2
-+#include <sys/sunddi.h>
-+#endif
-+
- #include <netinet/ip.h>
- #include <netinet/tcp.h>
-
-diff -ruN ppp-2.4.2/ppp.texi ppp-cvs-20040427/ppp.texi
---- ppp-2.4.2/ppp.texi 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/ppp.texi 1996-08-28 08:30:33.000000000 +0200
-@@ -0,0 +1,561 @@
-+\input texinfo @c -*-texinfo-*-
-+@setfilename ppp.info
-+@settitle PPP
-+
-+@iftex
-+@finalout
-+@end iftex
-+
-+@ifinfo
-+@format
-+START-INFO-DIR-ENTRY
-+* PPP: (ppp). Point-to-Point Protocol.
-+END-INFO-DIR-ENTRY
-+@end format
-+
-+@titlepage
-+@title PPP-2.x Users' Guide
-+@author by Paul Mackerras
-+@end titlepage
-+
-+@node Top, Introduction, (dir), (dir)
-+
-+@ifinfo
-+This file documents how to use the ppp-2.x package to set up network
-+links over serial lines with the Point-to-Point Protocol.
-+
-+@end ifinfo
-+
-+@menu
-+* Introduction:: Basic concepts of the Point-to-Point
-+ Protocol and the ppp-2.x package.
-+* Installation:: How to compile and install the software.
-+* Configuration:: How to set up your system for
-+ establishing a link to another system.
-+* Security:: Avoid creating security holes.
-+* Compression:: Using compression of various kinds
-+ to improve throughput.
-+@end menu
-+
-+@node Introduction, Installation, Top, Top
-+@chapter Introduction
-+
-+The Point-to-Point Protocol (PPP) is the protocol of choice for
-+establishing network links over serial lines. This package (ppp-2.x)
-+provides an implementation of PPP which supports the Internet Protocols
-+(TCP/IP, UDP/IP, etc.) and which runs on a range of Unix workstations.
-+
-+A typical use of PPP is to provide a network connection, via a modem,
-+between a workstation and an Internet Service Provider (ISP). When this
-+connection is established, the workstation is connected to the internet,
-+and applications running on the workstation can then make connections to
-+other hosts anywhere on the internet. This package can be used at
-+either or both ends of such a link.
-+
-+Features of PPP include:
-+@itemize @bullet
-+@item
-+Multi-protocol support. The PPP packet encapsulation includes a
-+protocol field, allowing packets from many different protocols to be
-+multiplexed across a single link.
-+@item
-+Negotiation of link characteristics. During link establishment, the two
-+systems negotiate about the link configuration parameters, such as the
-+IP addresses of each end of the link.
-+@item
-+Authentication. Optionally, each system can be configured to require the
-+other system to authenticate itself. In this way, access can be
-+restricted to authorized systems.
-+@item
-+Transparency. On asynchronous serial lines, PPP can be configured to
-+transmit certain characters as a two-character escape sequence.
-+@item
-+Compression. PPP includes support for various kinds of compression to
-+be applied to the packets before they are transmitted.
-+@end itemize
-+
-+The ppp-2.x software consists of two parts:
-+
-+@itemize @bullet
-+
-+@item
-+Kernel code, which establishes a network interface and passes packets
-+between the serial port, the kernel networking code and the PPP daemon
-+(@file{pppd}). This code is implemented using STREAMS modules on
-+Solaris 2, SunOS 4.x, AIX 4.1 and OSF/1, and as a tty line discipline
-+under Ultrix, NextStep, NetBSD, FreeBSD, and Linux.
-+
-+@item
-+The PPP daemon (@file{pppd}), which negotiates with the peer to
-+establish the link and sets up the ppp network interface. Pppd includes
-+support for authentication. It can authenticate itself to the other
-+system and/or require the other system to authenticate itself, so that
-+you can control which other systems may make a PPP connection and what
-+IP addresses they may use.
-+@end itemize
-+
-+@menu
-+* PPP Concepts:: Basic concepts and terms used with PPP.
-+* PPP packet format:: How data is packaged up for transmission.
-+* LCP negotiation:: The parameters which are negotiated
-+ using the Link Control Protocol.
-+* IPCP negotiation:: The parameters which are negotiated
-+ using the IP Control Protocol.
-+@end menu
-+
-+@node PPP Concepts, PPP packet format, Introduction, Introduction
-+@section PPP Concepts
-+
-+To use PPP to provide a network connection between two machines, there
-+must be some way that a stream of bytes, or characters, can be passed
-+from one to the other, in both directions independently. We refer to
-+this as the ``serial link''. Very often the serial link involves
-+asynchronous communications ports and modems, but other kinds of serial
-+link are possible.
-+
-+The serial link must transmit (at least) 8 bits per character; PPP
-+cannot work over a serial link which transmits only 7 bits per
-+character. However, it need not transmit all byte values transparently.
-+PPP has a mechanism to avoid sending certain characters if it is known
-+that the some element of the serial link interprets them specially. For
-+example, the DC1 and DC3 ASCII characters (control-Q and control-S) may
-+be trapped by a modem if it is set for ``software'' flow control. PPP
-+can send these characters as a two-character ``escape'' sequence. The
-+set of characters which are to be transmitted as an escape sequence is
-+represented in an ``async control character map'' (ACCM). The ``async''
-+part refers to the fact that this facility is used for asynchronous
-+serial links. For synchronous serial connections, the HDLC bit-stuffing
-+procedure is used instead.
-+
-+The two systems connected by the serial link are called ``peers''. When
-+we are talking from the point of view of one of the systems, the other
-+is often referred to as ``the peer''. Sometimes we may refer to one
-+system as a ``client'' and the other as a ``server''. This distinction
-+refers mainly to the way the serial link is set up; usually the client
-+is the peer that initiates the connection, for example by dialling the
-+server with its modem.
-+
-+During the lifetime of a PPP connection, it proceeds through several
-+phases:
-+
-+@enumerate
-+@item
-+Serial link establishment. In this phase, the serial link is set up and
-+PPP protocol software is attached to each end of the serial link. The
-+precise steps involved in doing this vary greatly, depending on the
-+nature of the serial link. For the common case of modems connected
-+through the telephone network, this involves first sending commands to
-+the modem to cause it to dial the remote system. When the remote system
-+answers, the local system usually has to supply a username and password,
-+and then issue a command to invoke PPP software on the remote system.
-+The ``chat'' program supplied with ppp-2.x provides a way to automate a
-+dialog with the modem and the remote system. This phase is not
-+standardized; it is outside the scope of the PPP protocol
-+specifications.
-+
-+@item
-+Link Control Protocol (LCP) negotiation. In this phase, the peers send
-+LCP packets to each other to negotiate various parameters of the
-+connection, such as the ACCM to be used in each direction, whether
-+authentication is required, and whether or not to use various forms of
-+compression. When the peers reach agreement on these parameters, LCP is
-+said to be ``up''.
-+
-+@item
-+Authentication. If one (or both) of the peers requires the other
-+peer to authenticate itself, that occurs next. If one of the peers
-+cannot successfully authenticate itself, the other peer terminates the
-+link.
-+
-+@item
-+Network Control Protocol (NCP) negotiation. PPP can potentially support
-+several different network protocols, although IP is the only network
-+protocol (NP) supported by the ppp-2.x package. Each NP has an
-+associated NCP defined for it, which is used to negotiate the specific
-+parameters which affect that NP. For example, the IP Control Protocol
-+(IPCP) is used to negotiate the IP addresses for each end of the link,
-+and whether the TCP header compression method described by Van Jacobsen
-+in RFC 1144 (``VJ compression'') is to be used.
-+
-+@item
-+Network communication. When each NCP has successfully negotiated the
-+parameters for its NP, that NCP is said to be ``up''. At that point,
-+the PPP link is made available for data traffic from that NP. For
-+example, when IPCP comes up, the PPP link is then available for carrying
-+IP packets (which of course includes packets from those protocols which
-+are layered above IP, such as TCP, UDP, etc.)
-+
-+@item
-+Termination. When the link is no longer required, it is terminated.
-+Usually this involves an exchange of LCP packets so that one peer can
-+notify the other that it is shutting down the link, enabling both peers
-+to shut down in an orderly manner. But of course there are occasions
-+when the link terminates because the serial link is interrupted, for
-+example, when a modem loses carrier and hangs up.
-+
-+@end enumerate
-+
-+The protocols in the PPP family are produced by the Point-to-Point
-+Working Group of the Internet Engineering Task Force, and are specified
-+in RFC (Request for Comments) documents, available by anonymous FTP from
-+several sites.
-+
-+PPP is defined in several RFCs, in
-+particular RFCs 1661, 1662, and 1334. IPCP is defined in RFC 1332.
-+Other RFCs describe the control protocols for other network protocols
-+(e.g., DECnet, OSI, Appletalk). RFCs are available by anonymous FTP
-+from several sites including nic.ddn.mil, nnsc.nsf.net, nic.nordu.net,
-+ftp.nisc.sri.com, and munnari.oz.au.
-+
-+@node PPP packet format, LCP negotiation, PPP Concepts, Introduction
-+@section PPP packet format
-+
-+PPP transmits packets over the serial link using a simple encapsulation
-+scheme. First, a two-byte PPP Protocol field is inserted before the
-+data to be sent. The value in this field identifies
-+which higher-level protocol (either a network protocol such as IP or a
-+PPP control protocol such as LCP) should receive the data in the packet.
-+By default, a one-byte Address field with the value 0xFF, and a one-byte
-+Control field with the value 0x03, are inserted before the PPP Protocol
-+field (apparently this is supposed to provide compatibility with HDLC,
-+in case there is a synchronous to asynchronous converter in the serial
-+link).
-+
-+On slow serial links, these fields can be compressed down to one byte in
-+most cases. The PPP Address and Control fields are compressed by simply
-+omitting them (``address/control compression''). The PPP Protocol field
-+values are chosen so that bit 0 (the least-significant bit) of the first
-+(most significant) byte is always 0, and bit 0 of the second byte is
-+always 1. The PPP Protocol field can be compressed by omitting the
-+first byte, provided that it is 0 (``protocol compression''). The
-+values for this field are assigned so that the first byte is zero for
-+all of the commonly-used network protocols. For example, the PPP
-+Protocol field value for IP is 0x21.
-+
-+For asynchronous serial links, which do not provide any packet framing
-+or transparency, a further encapsulation is used as follows. First a
-+16-bit Frame Check Sequence (FCS) is computed over the packet to be
-+sent, and appended as two bytes to the end of the packet.
-+
-+Then each byte of the packet is examined, and if it contains one of the
-+characters which are to be escaped, it is replaced by a two byte
-+sequence: the 0x7d character '}', followed by the character with bit 5
-+inverted. For example, the control-C character (0x03) could be replaced
-+by the two-byte sequence 0x7d, 0x23 ('}#'). The 0x7d and 0x7e ('~')
-+characters are always escaped, and the 0x5e ('^') character may not be
-+escaped.
-+
-+Finally, a ``flag'' character (0x7e, '~') is inserted at the beginning
-+and end of the packet to mark the packet boundaries. The initial flag
-+may be omitted if this packet immediately follows another packet, as the
-+ending flag for the previous packet can serve as the beginning flag of
-+this packet.
-+
-+@node LCP negotiation, IPCP negotiation, PPP packet format, Introduction
-+@section LCP negotiation
-+
-+The LCP negotiation process actually involves two sets of negotiations,
-+one for each direction of the PPP connection. Thus A will send B
-+packets (``Configure-Requests'') describing what characteristics A would
-+like to have apply to the B -> A direction of the link, that is, to the
-+packets that A will receive. Similarly B will send A packets describing
-+the characteristics it would like to have apply to the packets it will
-+be receiving. These characteristics need not necessarily be the same in
-+both directions.
-+
-+The parameters which are negotiated for each direction of the connection
-+using LCP are:
-+
-+@itemize @bullet
-+@item
-+Maximum Receive Unit (MRU): indicates the maximum packet size which we
-+are prepared to receive (specifically the maximum size of the
-+data portion of the packet). The default value is 1500, but on
-+slow serial links, smaller values give better response. The choice of
-+MRU is discussed below (see xxx).
-+
-+@item
-+Async Control Character Map (ACCM): indicates the set of control
-+characters (characters with ASCII values in the range 0 - 31) which we
-+wish to receive in escaped form. The default is that the sender should
-+escape all characters in the range 0 - 31.
-+
-+@item
-+Authentication Protocol: indicates which protocol we would like the peer
-+to use to authenticate itself. Common choices are the Password
-+Authentication Protocol (PAP) and the Cryptographic Handshake
-+Authentication Protocol (CHAP).
-+
-+@item
-+Quality Protocol: indicates which protocol which we would like the peer
-+to use to send us link quality reports. The ppp-2.x package does not
-+currently support link quality reports.
-+
-+@item
-+Magic Number: a randomly-chosen number, different from the peer's magic
-+number. If we persistently receive our own magic number in the peer's
-+configure-request packets, then we can conclude that the serial link is
-+looped back.
-+
-+@item
-+Protocol Field Compression: indicates that we wish the peer to compress
-+the PPP Protocol field to one byte, where possible, in the packets it
-+sends.
-+
-+@item
-+Address/Control Field Compression: indicates that we wish the peer to
-+compress the PPP Address/Control fields (by simply omitting them) in the
-+packets it sends.
-+@end itemize
-+
-+@node IPCP negotiation, , LCP negotiation, Introduction
-+@section IPCP negotiation
-+
-+The IPCP negotiation process is very similar to the LCP negotiation
-+process, except that of course different parameters are negotiated.
-+The parameters which are negotiated using IPCP are:
-+
-+@itemize @bullet
-+@item
-+IP Address: the IP address (32-bit host IP number) which we plan to use
-+as the local address for our end of the link.
-+
-+@item
-+TCP header compression: indicates (a) that we wish the peer to compress
-+the TCP/IP headers of TCP/IP packets that it sends, using the Van
-+Jacobson algorithm as described in RFC1144; (b) the maximum slot ID that
-+we wish the peer to use, and (c) whether we are prepared to accept
-+packets with the slot ID field compressed (omitted).
-+
-+With Van Jacobson (VJ) compression, the receiver and transmitter (for
-+one direction of the connection) both keep a table, with a certain
-+number of ``slots'', where each slot holds the TCP/IP header of the most
-+recently transmitted packet for one TCP connection. If a packet is to
-+be transmitted for a TCP connection which does not have a slot currently
-+allocated, the VJ scheme will allocate one of the slots and send the
-+entire TCP/IP header, together with the slot number. For many packets,
-+there will be a slot already allocated for the TCP connection, and the
-+VJ scheme will then often be able to replace the entire TCP/IP header
-+with a much smaller compressed header (typically only 3 - 7 bytes)
-+describing which fields of the TCP/IP header have changed, and by how
-+much. If there are many more active connections than slots, the
-+efficiency of the VJ scheme will drop, because it will not be able to
-+send compressed headers as often.
-+
-+Usually the compressed header includes a one-byte slot index, indicating
-+which TCP connection the packet is for. It is possible to reduce the
-+header size by omitting the slot index when the packet has the same slot
-+index as the previous packet. However, this introduces a danger if the
-+lower levels of the PPP software can sometimes drop damaged packets
-+without informing the VJ decompressor, as it may then assume the wrong
-+slot index for packets which have the slot index field omitted. With
-+the ppp-2.x software, however, the probability of this happening is
-+generally very small (see xxx).
-+
-+@end itemize
-+
-+@node Installation, Configuration, Introduction, Top
-+@chapter Installation
-+
-+Because ppp-2.x includes code which must be incorporated into the
-+kernel, its installation process is necessarily quite heavily
-+system-dependent. In addition, you will require super-user privileges
-+(root access) to install the code.
-+
-+Some systems provide a ``modload'' facility, which allows you to load
-+new code into a running kernel without relinking the kernel or
-+rebooting. Under Solaris 2, SunOS 4.x, Linux, OSF/1 and NextStep, this
-+is the recommended (or only) way to install the kernel portion of the
-+ppp-2.x package.
-+
-+Under the remaining supported operating systems (NetBSD, FreeBSD,
-+Ultrix), it is necessary to go through the process of creating a new
-+kernel image and reboot. (Note that NetBSD and FreeBSD have a modload
-+facility, but ppp-2.x is currently not configured to take advantage of
-+it.)
-+
-+Detailed installation instructions for each operating system are
-+contained in the README files in the ppp-2.x distribution. In general,
-+the process involves executing the commands @samp{./configure},
-+@samp{make} and (as root) @samp{make install} in the ppp-2.x
-+distribution directory. (The Linux port requires the installation of
-+some header files before compiling; see README.linux for details.)
-+
-+@node Configuration, Security, Installation, Top
-+@chapter Configuration
-+
-+Once the ppp-2.x software is installed, you need to configure your
-+system for the particular PPP connections you wish to allow. Typically,
-+the elements you need to configure are:
-+
-+@itemize @bullet
-+@item
-+How the serial link is established and how pppd gets invoked.
-+@item
-+Setting up syslog to log messages from pppd to the console and/or
-+system log files.
-+@item
-+Pppd options to be used.
-+@item
-+Authentication secrets to use in authenticating us to the peer
-+and/or the peer to us.
-+@item
-+The IP addresses for each end of the link.
-+@end itemize
-+
-+In most cases, the system you are configuring will either be a
-+@dfn{client} system, actively initiating a PPP connection on user
-+request, or it will be a @dfn{server} system, passively waiting for
-+connections from client systems. Other arrangements are possible, but
-+the instructions in this system assume that you are configuring either a
-+client or a server.
-+
-+These instructions also assume that the serial link involves a serial
-+communications port (that is, a tty device), since pppd requires a
-+serial port.
-+
-+@menu
-+* Client machines::
-+* Server machines::
-+* Setting up syslog::
-+* Pppd options::
-+* Authentication secrets files::
-+* IP Addresses::
-+@end menu
-+
-+@node Client machines, Server machines, Configuration, Configuration
-+@section Client machines
-+
-+On a client machine, the way that the user requests that a connection be
-+established is by running pppd, either directly or through a shell
-+script. Pppd should be given the name of the serial port to use as an
-+option. In this mode, pppd will fork and detach itself from its
-+controlling terminal, so that the shell will return to its prompt. (If
-+this behaviour is not desired, use the -detach option.)
-+
-+Usually, the connect option should also be used. The connect option
-+takes an argument which is a command to run to establish the serial link
-+and invoke PPP software on the remote machine. This command is run with
-+its standard input and standard output connected to the serial port.
-+Giving the connect option to pppd also has the side-effect of causing
-+pppd to open the serial port without waiting for the modem carrier
-+detect signal.
-+
-+The process of establishing the serial link often involves a dialog. If
-+the serial port is connected to a modem, we first need to send some
-+commands to the modem to configure it and dial the remote system. Often
-+there is then a dialog with the remote system to supply a username and
-+password. The @file{chat} program supplied with the ppp-2.x package is
-+useful for automating such dialogs. Chat uses a @dfn{script} consisting
-+of alternately strings to expect to receive on the serial port, and
-+strings to send on the serial port. The script can also specify strings
-+which indicate an error and abort the dialog.
-+
-+@node Server machines, , Client machines, Configuration
-+@section Server machines
-+
-+There are generally three ways in which a server machine can be set up
-+to allow client machines to establish a PPP link:
-+
-+@enumerate
-+@item
-+Client machines log in as regular users (often via a serial port
-+connected to a modem, but possibly through a telnet or rlogin session)
-+and then run pppd as a shell command.
-+@item
-+Client machines log in using a username whose login shell is pppd
-+or a script which runs pppd.
-+@item
-+Client machines connect to a serial port which has a pppd running
-+permanently on it (instead of a "getty" or other program providing a
-+login service).
-+@end enumerate
-+
-+Method 1 is very simple to set up, and is useful where existing users of
-+a system have remote machines (for example at home) from which they want
-+to establish a PPP connection from time to time. Methods 2 and 3
-+possibly have a security advantage in that they do not allow PPP client
-+systems access to a shell. Method 2 allows regular logins and PPP
-+connections on the same port, while with method 3, would-be crackers may
-+well be frustrated (unless they speak fluent PPP).
-+
-+With any of these methods, I strongly recommend that you configure PPP
-+to require authentication from the client, by including the `auth'
-+option in the /etc/ppp/options file.
-+
-+@node Setting up syslog, , Server machines, Configuration
-+@section Setting up syslog
-+
-+Pppd uses the @file{syslog} facility to report information about the
-+state of the connection, as does @file{chat}. It is useful to set up
-+syslog to print some of these messages on the console, and to record
-+most of them to a file. The messages from pppd are logged with facility
-+@samp{daemon} and one of three levels:
-+@itemize @bullet
-+@item
-+@samp{notice} for messages about important events such as the
-+connection becoming available for IP traffic and the local and remote IP
-+addresses in use.
-+@item
-+@samp{info} for messages about less important events, such as
-+detecting a modem hangup.
-+@item
-+@samp{debug} for messages which are of use in working out why the
-+connection is not working properly.
-+@end itemize
-+
-+The messages from chat are logged with facility @samp{local2} and level
-+@samp{debug}.
-+
-+Syslog is controlled by the syslog configuration file
-+@file{/etc/syslog.conf}. Generally the standard configuration will log
-+facility @samp{daemon} messages with level @samp{notice} and above to a
-+system log file such as @file{/var/log/syslog} (the name may vary on
-+different systems). I find it useful to have the notice level messages
-+from pppd displayed on the console, and all messages from pppd and chat
-+logged to a file such as @file{/etc/ppp/log}. To achieve this,
-+find the line in /etc/syslog.conf which has /dev/console
-+on the right-hand side, and add `daemon.notice' on the left. This
-+line should end up something like this:
-+
-+@example
-+*.err;kern.debug;auth.notice;mail.crit;daemon.notice /dev/console
-+@end example
-+
-+And add a line like this:
-+
-+@example
-+daemon,local2.debug /etc/ppp/log
-+@end example
-+
-+The space between the left and right hand sides is one or more tabs, not
-+spaces, and there are no tabs or spaces at the beginning of the line.
-+
-+You will need to create an empty @file{/etc/ppp/log} file; syslogd will
-+not create it. Once you have modified @file{/etc/syslog.conf}, you need
-+to either reboot or notify syslogd to re-read the file. On most
-+systems, you notify syslogd by sending it a SIGHUP signal. Syslogd's
-+process ID is usually stored in a file such as @file{/etc/syslogd.pid}
-+or @file{/var/run/syslog.pid}. Thus you can notify syslogd to re-read
-+the file by executing a command such as:
-+
-+@example
-+kill -HUP `cat /etc/syslogd.pid`
-+@end example
-+
-+@node Pppd options, , Setting up syslog, Configuration
-+@section Pppd options
-+
-+@node Authentication secrets files, , Pppd options, Configuration
-+@section Authentication secrets files
-+
-+@node IP Addresses, , Authentication secrets files, Configuration
-+@section IP Addresses
-+
-+@node Security, Compression, Configuration, Top
-+@chapter Security
-+
-+@node Compression, , Security, Top
-+@chapter Compression
-+
-+@bye
-diff -ruN ppp-2.4.2/pppd/Makefile.sol2 ppp-cvs-20040427/pppd/Makefile.sol2
---- ppp-2.4.2/pppd/Makefile.sol2 2003-11-27 22:25:25.000000000 +0100
-+++ ppp-cvs-20040427/pppd/Makefile.sol2 2002-11-02 20:50:09.000000000 +0100
-@@ -1,6 +1,6 @@
- #
- # Makefile for pppd under Solaris 2.
--# $Id: Makefile.sol2,v 1.24 2003/11/27 21:25:25 paulus Exp $
-+# $Id: Makefile.sol2,v 1.23 2002/11/02 19:48:12 carlsonj Exp $
- #
-
- include ../Makedefs.com
-@@ -8,8 +8,8 @@
- CFLAGS = -I../include -DSVR4 -DSOL2 $(COPTS)
- LIBS = -lsocket -lnsl
-
--OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap-new.o eap.o md5.o \
-- tty.o ccp.o ecp.o auth.o options.o demand.o utils.o sys-solaris.o
-+OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o eap.o md5.o tty.o \
-+ ccp.o ecp.o auth.o options.o demand.o utils.o sys-solaris.o
-
- #
- # uncomment the following to enable plugins
-diff -ruN ppp-2.4.2/pppd/Makefile.sunos4 ppp-cvs-20040427/pppd/Makefile.sunos4
---- ppp-2.4.2/pppd/Makefile.sunos4 2003-11-27 22:25:25.000000000 +0100
-+++ ppp-cvs-20040427/pppd/Makefile.sunos4 2002-11-02 20:50:09.000000000 +0100
-@@ -1,6 +1,6 @@
- #
- # Makefile for pppd under SunOS 4.
--# $Id: Makefile.sunos4,v 1.14 2003/11/27 21:25:25 paulus Exp $
-+# $Id: Makefile.sunos4,v 1.13 2002/11/02 19:48:12 carlsonj Exp $
- #
-
- include ../sunos4/Makedefs
-@@ -12,7 +12,7 @@
-
- all: pppd
-
--OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap-new.o md5.o ccp.o ecp.o \
-+OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o ecp.o \
- auth.o options.o demand.o utils.o sys-sunos4.o tty.o eap.o
-
- pppd: $(OBJS)
-diff -ruN ppp-2.4.2/pppd/chap-new.c ppp-cvs-20040427/pppd/chap-new.c
---- ppp-2.4.2/pppd/chap-new.c 2003-11-27 23:22:36.000000000 +0100
-+++ ppp-cvs-20040427/pppd/chap-new.c 2004-01-17 06:50:11.000000000 +0100
-@@ -33,7 +33,7 @@
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
--#define RCSID "$Id: chap-new.c,v 1.3 2003/11/27 22:22:36 paulus Exp $"
-+#define RCSID "$Id: chap-new.c,v 1.4 2004/01/17 05:47:55 carlsonj Exp $"
-
- #include <stdlib.h>
- #include <string.h>
-@@ -49,7 +49,7 @@
- int (*chap_verify_hook)(char *name, char *ourname, int id,
- struct chap_digest_type *digest,
- unsigned char *challenge, unsigned char *response,
-- unsigned char *message, int message_space) = NULL;
-+ char *message, int message_space) = NULL;
-
- /*
- * Option variables.
-@@ -119,7 +119,7 @@
- static int chap_verify_response(char *name, char *ourname, int id,
- struct chap_digest_type *digest,
- unsigned char *challenge, unsigned char *response,
-- unsigned char *message, int message_space);
-+ char *message, int message_space);
- static void chap_respond(struct chap_client_state *cs, int id,
- unsigned char *pkt, int len);
- static void chap_handle_status(struct chap_client_state *cs, int code, int id,
-@@ -306,11 +306,11 @@
- {
- int response_len, ok, mlen;
- unsigned char *response, *p;
-- unsigned char *name = NULL; /* initialized to shut gcc up */
-+ char *name = NULL; /* initialized to shut gcc up */
- int (*verifier)(char *, char *, int, struct chap_digest_type *,
-- unsigned char *, unsigned char *, unsigned char *, int);
-+ unsigned char *, unsigned char *, char *, int);
- char rname[MAXNAMELEN+1];
-- unsigned char message[256];
-+ char message[256];
-
- if ((ss->flags & LOWERUP) == 0)
- return;
-@@ -322,7 +322,7 @@
- response = pkt;
- GETCHAR(response_len, pkt);
- len -= response_len + 1; /* length of name */
-- name = pkt + response_len;
-+ name = (char *)pkt + response_len;
- if (len < 0)
- return;
-
-@@ -391,14 +391,14 @@
- chap_verify_response(char *name, char *ourname, int id,
- struct chap_digest_type *digest,
- unsigned char *challenge, unsigned char *response,
-- unsigned char *message, int message_space)
-+ char *message, int message_space)
- {
- int ok;
-- char secret[MAXSECRETLEN];
-+ unsigned char secret[MAXSECRETLEN];
- int secret_len;
-
- /* Get the secret that the peer is supposed to know */
-- if (!get_secret(0, name, ourname, secret, &secret_len, 1)) {
-+ if (!get_secret(0, name, ourname, (char *)secret, &secret_len, 1)) {
- error("No CHAP secret found for authenticating %q", name);
- return 0;
- }
-diff -ruN ppp-2.4.2/pppd/chap-new.h ppp-cvs-20040427/pppd/chap-new.h
---- ppp-2.4.2/pppd/chap-new.h 2003-06-11 14:47:31.000000000 +0200
-+++ ppp-cvs-20040427/pppd/chap-new.h 2004-01-17 06:50:12.000000000 +0100
-@@ -123,7 +123,7 @@
- extern int (*chap_verify_hook)(char *name, char *ourname, int id,
- struct chap_digest_type *digest,
- unsigned char *challenge, unsigned char *response,
-- unsigned char *message, int message_space);
-+ char *message, int message_space);
-
- /* Called by digest code to register a digest type */
- extern void chap_register_digest(struct chap_digest_type *);
-diff -ruN ppp-2.4.2/pppd/chap_ms.c ppp-cvs-20040427/pppd/chap_ms.c
---- ppp-2.4.2/pppd/chap_ms.c 2003-11-18 11:42:56.000000000 +0100
-+++ ppp-cvs-20040427/pppd/chap_ms.c 2004-04-14 04:40:21.000000000 +0200
-@@ -74,7 +74,7 @@
- *
- */
-
--#define RCSID "$Id: chap_ms.c,v 1.30 2003/07/10 17:59:33 fcusack Exp $"
-+#define RCSID "$Id: chap_ms.c,v 1.31 2004/04/14 02:39:39 carlsonj Exp $"
-
- #ifdef CHAPMS
-
-@@ -164,9 +164,11 @@
- chapms_generate_challenge(unsigned char *challenge)
- {
- *challenge++ = 8;
-+#ifdef DEBUGMPPEKEY
- if (mschap_challenge && strlen(mschap_challenge) == 8)
- memcpy(challenge, mschap_challenge, 8);
- else
-+#endif
- random_bytes(challenge, 8);
- }
-
-@@ -174,9 +176,11 @@
- chapms2_generate_challenge(unsigned char *challenge)
- {
- *challenge++ = 16;
-+#ifdef DEBUGMPPEKEY
- if (mschap_challenge && strlen(mschap_challenge) == 16)
- memcpy(challenge, mschap_challenge, 16);
- else
-+#endif
- random_bytes(challenge, 16);
- }
-
-@@ -207,7 +211,7 @@
- #endif
-
- /* Generate the expected response. */
-- ChapMS(challenge, secret, secret_len, &md);
-+ ChapMS(challenge, (char *)secret, secret_len, &md);
-
- #ifdef MSLANMAN
- /* Determine which part of response to verify against */
-@@ -250,8 +254,8 @@
-
- /* Generate the expected response and our mutual auth. */
- ChapMS2(challenge, rmd->PeerChallenge, name,
-- secret, secret_len, &md,
-- saresponse, MS_CHAP2_AUTHENTICATOR);
-+ (char *)secret, secret_len, &md,
-+ (unsigned char *)saresponse, MS_CHAP2_AUTHENTICATOR);
-
- /* compare MDs and send the appropriate status */
- /*
-@@ -326,8 +330,13 @@
- {
- challenge++; /* skip length, should be 16 */
- *response++ = MS_CHAP2_RESPONSE_LEN;
-- ChapMS2(challenge, mschap2_peer_challenge, our_name,
-- secret, secret_len,
-+ ChapMS2(challenge,
-+#ifdef DEBUGMPPEKEY
-+ mschap2_peer_challenge,
-+#else
-+ NULL,
-+#endif
-+ our_name, secret, secret_len,
- (MS_Chap2Response *) response, private,
- MS_CHAP2_AUTHENTICATEE);
- }
-@@ -335,7 +344,8 @@
- static int
- chapms2_check_success(unsigned char *msg, int len, unsigned char *private)
- {
-- if ((len < MS_AUTH_RESPONSE_LENGTH + 2) || strncmp(msg, "S=", 2)) {
-+ if ((len < MS_AUTH_RESPONSE_LENGTH + 2) ||
-+ strncmp((char *)msg, "S=", 2) != 0) {
- /* Packet does not start with "S=" */
- error("MS-CHAPv2 Success packet is badly formed.");
- return 0;
-@@ -351,7 +361,7 @@
- /* Authenticator Response matches. */
- msg += MS_AUTH_RESPONSE_LENGTH; /* Eat it */
- len -= MS_AUTH_RESPONSE_LENGTH;
-- if ((len >= 3) && !strncmp(msg, " M=", 3)) {
-+ if ((len >= 3) && !strncmp((char *)msg, " M=", 3)) {
- msg += 3; /* Eat the delimiter */
- } else if (len) {
- /* Packet has extra text which does not begin " M=" */
-@@ -477,7 +487,7 @@
- SHA1_Init(&sha1Context);
- SHA1_Update(&sha1Context, PeerChallenge, 16);
- SHA1_Update(&sha1Context, rchallenge, 16);
-- SHA1_Update(&sha1Context, user, strlen(user));
-+ SHA1_Update(&sha1Context, (unsigned char *)user, strlen(user));
- SHA1_Final(sha1Hash, &sha1Context);
-
- BCOPY(sha1Hash, Challenge, 8);
-@@ -512,7 +522,7 @@
- MD4_CTX md4Context;
-
- MD4Init(&md4Context);
-- MD4Update(&md4Context, secret, mdlen);
-+ MD4Update(&md4Context, (unsigned char *)secret, mdlen);
- MD4Final(hash, &md4Context);
-
- }
-@@ -526,7 +536,7 @@
-
- /* Hash the Unicode version of the secret (== password). */
- ascii2unicode(secret, secret_len, unicodePassword);
-- NTPasswordHash(unicodePassword, secret_len * 2, PasswordHash);
-+ NTPasswordHash((char *)unicodePassword, secret_len * 2, PasswordHash);
-
- ChallengeResponse(rchallenge, PasswordHash, NTResponse);
- }
-@@ -539,11 +549,12 @@
- u_char PasswordHash[MD4_SIGNATURE_SIZE];
- u_char Challenge[8];
-
-- ChallengeHash(PeerChallenge, rchallenge, username, Challenge);
-+ ChallengeHash(PeerChallenge, (unsigned char *)rchallenge, username,
-+ Challenge);
-
- /* Hash the Unicode version of the secret (== password). */
- ascii2unicode(secret, secret_len, unicodePassword);
-- NTPasswordHash(unicodePassword, secret_len * 2, PasswordHash);
-+ NTPasswordHash((char *)unicodePassword, secret_len * 2, PasswordHash);
-
- ChallengeResponse(Challenge, PasswordHash, NTResponse);
- }
-@@ -603,8 +614,9 @@
-
- /* Hash (x2) the Unicode version of the secret (== password). */
- ascii2unicode(secret, secret_len, unicodePassword);
-- NTPasswordHash(unicodePassword, secret_len * 2, PasswordHash);
-- NTPasswordHash(PasswordHash, sizeof(PasswordHash), PasswordHashHash);
-+ NTPasswordHash((char *)unicodePassword, secret_len * 2, PasswordHash);
-+ NTPasswordHash((char *)PasswordHash, sizeof(PasswordHash),
-+ PasswordHashHash);
-
- SHA1_Init(&sha1Context);
- SHA1_Update(&sha1Context, PasswordHashHash, sizeof(PasswordHashHash));
-@@ -622,7 +634,7 @@
-
- /* Convert to ASCII hex string. */
- for (i = 0; i < MAX((MS_AUTH_RESPONSE_LENGTH / 2), sizeof(Digest)); i++)
-- sprintf(&authResponse[i * 2], "%02X", Digest[i]);
-+ sprintf((char *)&authResponse[i * 2], "%02X", Digest[i]);
- }
-
-
-@@ -825,7 +837,7 @@
- sizeof(response->PeerChallenge));
-
- /* Generate the NT-Response */
-- ChapMS2_NT(rchallenge, response->PeerChallenge, user,
-+ ChapMS2_NT((char *)rchallenge, response->PeerChallenge, user,
- secret, secret_len, response->NTResp);
-
- /* Generate the Authenticator Response. */
-diff -ruN ppp-2.4.2/pppd/fsm.c ppp-cvs-20040427/pppd/fsm.c
---- ppp-2.4.2/pppd/fsm.c 2003-06-29 12:06:14.000000000 +0200
-+++ ppp-cvs-20040427/pppd/fsm.c 2004-02-02 05:00:11.000000000 +0100
-@@ -40,7 +40,7 @@
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
--#define RCSID "$Id: fsm.c,v 1.20 2003/06/29 10:06:14 paulus Exp $"
-+#define RCSID "$Id: fsm.c,v 1.22 2004/02/02 03:57:19 carlsonj Exp $"
-
- /*
- * TODO:
-@@ -201,6 +201,44 @@
- }
- }
-
-+/*
-+ * terminate_layer - Start process of shutting down the FSM
-+ *
-+ * Cancel any timeout running, notify upper layers we're done, and
-+ * send a terminate-request message as configured.
-+ */
-+static void
-+terminate_layer(f, nextstate)
-+ fsm *f;
-+ int nextstate;
-+{
-+ if( f->state != OPENED )
-+ UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
-+ else if( f->callbacks->down )
-+ (*f->callbacks->down)(f); /* Inform upper layers we're down */
-+
-+ /* Init restart counter and send Terminate-Request */
-+ f->retransmits = f->maxtermtransmits;
-+ fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-+ (u_char *) f->term_reason, f->term_reason_len);
-+
-+ if (f->retransmits == 0) {
-+ /*
-+ * User asked for no terminate requests at all; just close it.
-+ * We've already fired off one Terminate-Request just to be nice
-+ * to the peer, but we're not going to wait for a reply.
-+ */
-+ f->state = nextstate == CLOSING ? CLOSED : STOPPED;
-+ if( f->callbacks->finished )
-+ (*f->callbacks->finished)(f);
-+ return;
-+ }
-+
-+ TIMEOUT(fsm_timeout, f, f->timeouttime);
-+ --f->retransmits;
-+
-+ f->state = nextstate;
-+}
-
- /*
- * fsm_close - Start closing connection.
-@@ -230,19 +268,7 @@
- case ACKRCVD:
- case ACKSENT:
- case OPENED:
-- if( f->state != OPENED )
-- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
-- else if( f->callbacks->down )
-- (*f->callbacks->down)(f); /* Inform upper layers we're down */
--
-- /* Init restart counter, send Terminate-Request */
-- f->retransmits = f->maxtermtransmits;
-- fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-- (u_char *) f->term_reason, f->term_reason_len);
-- TIMEOUT(fsm_timeout, f, f->timeouttime);
-- --f->retransmits;
--
-- f->state = CLOSING;
-+ terminate_layer(f, CLOSING);
- break;
- }
- }
-@@ -689,17 +715,7 @@
- break;
-
- case OPENED:
-- if( f->callbacks->down )
-- (*f->callbacks->down)(f);
--
-- /* Init restart counter, send Terminate-Request */
-- f->retransmits = f->maxtermtransmits;
-- fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-- (u_char *) f->term_reason, f->term_reason_len);
-- TIMEOUT(fsm_timeout, f, f->timeouttime);
-- --f->retransmits;
--
-- f->state = STOPPING;
-+ terminate_layer(f, STOPPING);
- break;
-
- default:
-diff -ruN ppp-2.4.2/pppd/main.c ppp-cvs-20040427/pppd/main.c
---- ppp-2.4.2/pppd/main.c 2004-01-13 05:00:34.000000000 +0100
-+++ ppp-cvs-20040427/pppd/main.c 2004-04-12 13:25:19.000000000 +0200
-@@ -40,7 +40,7 @@
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
--#define RCSID "$Id: main.c,v 1.131 2004/01/13 04:00:34 paulus Exp $"
-+#define RCSID "$Id: main.c,v 1.136 2004/04/12 11:20:19 paulus Exp $"
-
- #include <stdio.h>
- #include <ctype.h>
-@@ -150,6 +150,7 @@
- int got_sigterm;
- int got_sighup;
-
-+static sigset_t signals_handled;
- static int waiting;
- static sigjmp_buf sigjmp;
-
-@@ -648,16 +649,15 @@
- handle_events()
- {
- struct timeval timo;
-- sigset_t mask;
-
- kill_link = open_ccp_flag = 0;
- if (sigsetjmp(sigjmp, 1) == 0) {
-- sigprocmask(SIG_BLOCK, &mask, NULL);
-+ sigprocmask(SIG_BLOCK, &signals_handled, NULL);
- if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) {
-- sigprocmask(SIG_UNBLOCK, &mask, NULL);
-+ sigprocmask(SIG_UNBLOCK, &signals_handled, NULL);
- } else {
- waiting = 1;
-- sigprocmask(SIG_UNBLOCK, &mask, NULL);
-+ sigprocmask(SIG_UNBLOCK, &signals_handled, NULL);
- wait_input(timeleft(&timo));
- }
- }
-@@ -692,19 +692,18 @@
- setup_signals()
- {
- struct sigaction sa;
-- sigset_t mask;
-
- /*
- * Compute mask of all interesting signals and install signal handlers
- * for each. Only one signal handler may be active at a time. Therefore,
- * all other signals should be masked when any handler is executing.
- */
-- sigemptyset(&mask);
-- sigaddset(&mask, SIGHUP);
-- sigaddset(&mask, SIGINT);
-- sigaddset(&mask, SIGTERM);
-- sigaddset(&mask, SIGCHLD);
-- sigaddset(&mask, SIGUSR2);
-+ sigemptyset(&signals_handled);
-+ sigaddset(&signals_handled, SIGHUP);
-+ sigaddset(&signals_handled, SIGINT);
-+ sigaddset(&signals_handled, SIGTERM);
-+ sigaddset(&signals_handled, SIGCHLD);
-+ sigaddset(&signals_handled, SIGUSR2);
-
- #define SIGNAL(s, handler) do { \
- sa.sa_handler = handler; \
-@@ -712,7 +711,7 @@
- fatal("Couldn't establish signal handler (%d): %m", s); \
- } while (0)
-
-- sa.sa_mask = mask;
-+ sa.sa_mask = signals_handled;
- sa.sa_flags = 0;
- SIGNAL(SIGHUP, hup); /* Hangup */
- SIGNAL(SIGINT, term); /* Interrupt */
-@@ -1173,6 +1172,7 @@
- info("Connect time %d.%d minutes.", t/10, t%10);
- info("Sent %u bytes, received %u bytes.",
- link_stats.bytes_out, link_stats.bytes_in);
-+ link_stats_valid = 0;
- }
- }
-
-@@ -1329,6 +1329,7 @@
-
- /*
- * kill_my_pg - send a signal to our process group, and ignore it ourselves.
-+ * We assume that sig is currently blocked.
- */
- static void
- kill_my_pg(sig)
-@@ -1336,10 +1337,22 @@
- {
- struct sigaction act, oldact;
-
-+ sigemptyset(&act.sa_mask); /* unnecessary in fact */
- act.sa_handler = SIG_IGN;
- act.sa_flags = 0;
-- sigaction(sig, &act, &oldact);
- kill(0, sig);
-+ /*
-+ * The kill() above made the signal pending for us, as well as
-+ * the rest of our process group, but we don't want it delivered
-+ * to us. It is blocked at the moment. Setting it to be ignored
-+ * will cause the pending signal to be discarded. If we did the
-+ * kill() after setting the signal to be ignored, it is unspecified
-+ * (by POSIX) whether the signal is immediately discarded or left
-+ * pending, and in fact Linux would leave it pending, and so it
-+ * would be delivered after the current signal handler exits,
-+ * leading to an infinite loop.
-+ */
-+ sigaction(sig, &act, &oldact);
- sigaction(sig, &oldact, NULL);
- }
-
-diff -ruN ppp-2.4.2/pppd/plugins/Makefile ppp-cvs-20040427/pppd/plugins/Makefile
---- ppp-2.4.2/pppd/plugins/Makefile 2004-01-13 04:56:24.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/Makefile 1970-01-01 01:00:00.000000000 +0100
-@@ -1,38 +0,0 @@
--CC = gcc
--COPTS = -O2 -g
--CFLAGS = $(COPTS) -I.. -I../../include -fPIC
--LDFLAGS = -shared
--INSTALL = install -o root
--
--SUBDIRS := rp-pppoe
--# Uncomment the next line to include the radius authentication plugin
--# SUBDIRS += radius
--PLUGINS := minconn.so passprompt.so passwordfd.so
--
--# include dependencies if present
--ifeq (.depend,$(wildcard .depend))
--include .depend
--endif
--
--all: $(PLUGINS)
-- for d in $(SUBDIRS); do $(MAKE) $(MFLAGS) -C $$d all; done
--
--%.so: %.c
-- $(CC) -o $@ $(LDFLAGS) $(CFLAGS) $^
--
--VERSION = $(shell awk -F '"' '/VERSION/ { print $$2; }' ../patchlevel.h)
--LIBDIR = $(DESTDIR)/usr/lib/pppd/$(VERSION)
--
--install: $(PLUGINS)
-- $(INSTALL) -d $(LIBDIR)
-- $(INSTALL) $? $(LIBDIR)
-- for d in $(SUBDIRS); do $(MAKE) $(MFLAGS) -C $$d INSTALL=$(INSTALL) \
-- LIBDIR=$(LIBDIR) install; done
--
--clean:
-- rm -f *.o *.so *.a
-- for d in $(SUBDIRS); do $(MAKE) $(MFLAGS) -C $$d clean; done
--
--depend:
-- $(CPP) -M $(CFLAGS) *.c >.depend
-- for d in $(SUBDIRS); do $(MAKE) $(MFLAGS) -C $$d depend; done
-diff -ruN ppp-2.4.2/pppd/plugins/radius/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/CVS/Entries 2002-12-04 22:49:09.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/radius/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,7 +0,0 @@
--/pppd-radattr.8/1.1/Tue Jan 22 16:03:00 2002//
--/pppd-radius.8/1.4/Tue Apr 2 13:55:00 2002//
--/radattr.c/1.1/Tue Jan 22 16:03:00 2002//
--D/radiusclient////
--/Makefile.linux/1.5/Sat Nov 9 11:24:42 2002//
--/radrealms.c/1.1/Sat Oct 5 04:35:24 2002//
--/radius.c/1.18/Wed Dec 4 21:49:09 2002//
-diff -ruN ppp-2.4.2/pppd/plugins/radius/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/CVS/Repository 2002-09-07 12:37:51.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius
-diff -ruN ppp-2.4.2/pppd/plugins/radius/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/CVS/Root 2002-09-07 12:37:51.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/Makefile ppp-cvs-20040427/pppd/plugins/radius/Makefile
---- ppp-2.4.2/pppd/plugins/radius/Makefile 2002-11-09 12:24:42.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/radius/Makefile 1970-01-01 01:00:00.000000000 +0100
-@@ -1,74 +0,0 @@
--# Makefile for RADIUS plugin
--#
--# Copyright 2002 Roaring Penguin Software Inc.
--#
--
--MANDIR=/usr/man
--PLUGIN=radius.so radattr.so radrealms.so
--CFLAGS=-I../.. -I../../../include -Iradiusclient/include -O2
--
--# Uncomment the next line to include support for Microsoft's
--# MS-CHAP authentication protocol.
--CHAPMS=y
--# Uncomment the next line to include support for MPPE.
--MPPE=y
--# Uncomment the next lint to include support for traffic limiting
--MAXOCTETS=y
--
--ifdef CHAPMS
--CFLAGS += -DCHAPMS=1
--ifdef MPPE
--CFLAGS += -DMPPE=1
--endif
--endif
--ifdef MAXOCTETS
--CFLAGS += -DMAXOCTETS=1
--endif
--
--all: $(PLUGIN)
--
--install: all
-- $(MAKE) $(MFLAGS) -C radiusclient install
-- $(INSTALL) -d -m 755 $(LIBDIR)
-- $(INSTALL) -s -c -m 755 radius.so $(LIBDIR)
-- $(INSTALL) -s -c -m 755 radattr.so $(LIBDIR)
-- $(INSTALL) -s -c -m 755 radrealms.so $(LIBDIR)
-- $(INSTALL) -c -m 444 pppd-radius.8 $(MANDIR)/man8
-- $(INSTALL) -c -m 444 pppd-radattr.8 $(MANDIR)/man8
--
--radius.so: radiusclient/lib/.libs/libradiusclient.a radius.o
-- gcc -o radius.so -shared radius.o radiusclient/lib/.libs/libradiusclient.a
--
--radattr.so: radattr.o
-- gcc -o radattr.so -shared radattr.o
--
--radrealms.so: radrealms.o
-- gcc -o radrealms.so -shared radrealms.o
--
--radius.o: radius.c
-- gcc $(CFLAGS) -c -o radius.o -fPIC radius.c
--
--radattr.o: radattr.c
-- gcc $(CFLAGS) -c -o radattr.o -fPIC radattr.c
--
--radrealms.o: radrealms.c
-- gcc $(CFLAGS) -c -o radrealms.o -fPIC radrealms.c
--
--radiusclient/lib/.libs/libradiusclient.a:
-- test -r radiusclient/Makefile || \
-- (cd radiusclient; \
-- ./configure --prefix=/usr \
-- --sysconfdir=/etc \
-- --enable-shared \
-- --enable-static)
-- $(MAKE) -C radiusclient
--
--clean:
-- $(MAKE) $(MFLAGS) -C radiusclient clean
-- rm -f *.o *.so
--
--distclean:
-- rm -f *.o *.so
-- $(MAKE) $(MFLAGS) -C radiusclient distclean
--
--dist-clean: distclean
-diff -ruN ppp-2.4.2/pppd/plugins/radius/pppd-radius.8 ppp-cvs-20040427/pppd/plugins/radius/pppd-radius.8
---- ppp-2.4.2/pppd/plugins/radius/pppd-radius.8 2002-04-02 15:55:00.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/pppd-radius.8 2004-03-26 14:30:16.000000000 +0100
-@@ -1,5 +1,5 @@
- .\" manual page [] for RADIUS plugin for pppd 2.4
--.\" $Id: pppd-radius.8,v 1.4 2002/04/02 13:55:00 dfs Exp $
-+.\" $Id: pppd-radius.8,v 1.5 2004/03/26 13:27:17 kad Exp $
- .\" SH section heading
- .\" SS subsection heading
- .\" LP paragraph
-@@ -40,6 +40,15 @@
- used, then the plugin uses
- .I /etc/radiusclient/radiusclient.conf
- as the configuration file.
-+.TP
-+.BI "avpair " attribute=value
-+Adds an Attribute-Value pair to be passed on to the RADIUS server on each request.
-+.TP
-+.BI map-to-ifname
-+Sets Radius NAS-Port attribute to number equal to interface name (Default)
-+.TP
-+.BI map-to-ttyname
-+Sets Radius NAS-Port attribute value via libradiusclient library
-
- .SH USAGE
- To use the plugin, simply supply the
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radius.c ppp-cvs-20040427/pppd/plugins/radius/radius.c
---- ppp-2.4.2/pppd/plugins/radius/radius.c 2004-01-13 03:26:11.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/radius/radius.c 2004-04-12 07:20:16.000000000 +0200
-@@ -24,7 +24,7 @@
- *
- ***********************************************************************/
- static char const RCSID[] =
--"$Id: radius.c,v 1.22 2004/01/11 08:01:30 paulus Exp $";
-+"$Id: radius.c,v 1.25 2004/04/12 05:16:37 kad Exp $";
-
- #include "pppd.h"
- #include "chap-new.h"
-@@ -52,10 +52,15 @@
- char *vpstr;
- struct avpopt *next;
- } *avpopt = NULL;
-+static bool portnummap = 0;
-
- static option_t Options[] = {
- { "radius-config-file", o_string, &config_file },
- { "avpair", o_special, add_avp },
-+ { "map-to-ttyname", o_bool, &portnummap,
-+ "Set Radius NAS-Port attribute value via libradiusclient library", OPT_PRIO | 1 },
-+ { "map-to-ifname", o_bool, &portnummap,
-+ "Set Radius NAS-Port attribute to number as in interface name (Default)", OPT_PRIOSUB | 0 },
- { NULL }
- };
-
-@@ -264,7 +269,7 @@
-
- /* Hack... the "port" is the ppp interface number. Should really be
- the tty */
-- rstate.client_port = get_client_port(ifname);
-+ rstate.client_port = get_client_port(portnummap ? devnam : ifname);
-
- av_type = PW_FRAMED;
- rc_avpair_add(&send, PW_SERVICE_TYPE, &av_type, 0, VENDOR_NONE);
-@@ -363,7 +368,7 @@
- /* Put user with potentially realm added in rstate.user */
- if (!rstate.done_chap_once) {
- make_username_realm(user);
-- rstate.client_port = get_client_port (ifname);
-+ rstate.client_port = get_client_port (portnummap ? devnam : ifname);
- if (radius_pre_auth_hook) {
- radius_pre_auth_hook(rstate.user,
- &rstate.authserver,
-@@ -881,7 +886,7 @@
- rc_avpair_add(&send, PW_ACCT_AUTHENTIC, &av_type, 0, VENDOR_NONE);
-
-
-- av_type = PW_ASYNC;
-+ av_type = ( using_pty ? PW_VIRTUAL : ( sync_serial ? PW_SYNC : PW_ASYNC ) );
- rc_avpair_add(&send, PW_NAS_PORT_TYPE, &av_type, 0, VENDOR_NONE);
-
- hisaddr = ho->hisaddr;
-@@ -981,9 +986,56 @@
- remote_number, 0, VENDOR_NONE);
- }
-
-- av_type = PW_ASYNC;
-+ av_type = ( using_pty ? PW_VIRTUAL : ( sync_serial ? PW_SYNC : PW_ASYNC ) );
- rc_avpair_add(&send, PW_NAS_PORT_TYPE, &av_type, 0, VENDOR_NONE);
-
-+ av_type = PW_NAS_ERROR;
-+ switch( status ) {
-+ case EXIT_OK:
-+ case EXIT_USER_REQUEST:
-+ av_type = PW_USER_REQUEST;
-+ break;
-+
-+ case EXIT_HANGUP:
-+ case EXIT_PEER_DEAD:
-+ case EXIT_CONNECT_FAILED:
-+ av_type = PW_LOST_CARRIER;
-+ break;
-+
-+ case EXIT_INIT_FAILED:
-+ case EXIT_OPEN_FAILED:
-+ case EXIT_LOCK_FAILED:
-+ case EXIT_PTYCMD_FAILED:
-+ av_type = PW_PORT_ERROR;
-+ break;
-+
-+ case EXIT_PEER_AUTH_FAILED:
-+ case EXIT_AUTH_TOPEER_FAILED:
-+ case EXIT_NEGOTIATION_FAILED:
-+ case EXIT_CNID_AUTH_FAILED:
-+ av_type = PW_SERVICE_UNAVAILABLE;
-+ break;
-+
-+ case EXIT_IDLE_TIMEOUT:
-+ av_type = PW_ACCT_IDLE_TIMEOUT;
-+ break;
-+
-+ case EXIT_CONNECT_TIME:
-+ av_type = PW_ACCT_SESSION_TIMEOUT;
-+ break;
-+
-+#ifdef MAXOCTETS
-+ case EXIT_TRAFFIC_LIMIT:
-+ av_type = PW_NAS_REQUEST;
-+ break;
-+#endif
-+
-+ default:
-+ av_type = PW_NAS_ERROR;
-+ break;
-+ }
-+ rc_avpair_add(&send, PW_ACCT_TERMINATE_CAUSE, &av_type, 0, VENDOR_NONE);
-+
- hisaddr = ho->hisaddr;
- av_type = htonl(hisaddr);
- rc_avpair_add(&send, PW_FRAMED_IP_ADDRESS , &av_type , 0, VENDOR_NONE);
-@@ -1077,7 +1129,7 @@
- remote_number, 0, VENDOR_NONE);
- }
-
-- av_type = PW_ASYNC;
-+ av_type = ( using_pty ? PW_VIRTUAL : ( sync_serial ? PW_SYNC : PW_ASYNC ) );
- rc_avpair_add(&send, PW_NAS_PORT_TYPE, &av_type, 0, VENDOR_NONE);
-
- hisaddr = ho->hisaddr;
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/CVS/Entries 2002-09-07 12:37:54.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,28 +0,0 @@
--/BUGS/1.1/Tue Jan 22 16:03:00 2002//
--/CHANGES/1.1/Tue Jan 22 16:03:00 2002//
--/COPYRIGHT/1.1/Tue Jan 22 16:03:00 2002//
--/Makefile.am/1.1/Tue Jan 22 16:03:00 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:00 2002//
--/README/1.1/Tue Jan 22 16:03:00 2002//
--/README.radexample/1.1/Tue Jan 22 16:03:00 2002//
--/acconfig.h/1.1/Tue Jan 22 16:03:00 2002//
--/aclocal.m4/1.2/Mon Jun 24 12:57:15 2002//
--/config.guess/1.1/Tue Jan 22 16:03:00 2002//
--/config.h.in/1.3/Thu Jul 25 16:29:16 2002//
--/config.sub/1.1/Tue Jan 22 16:03:00 2002//
--/configure/1.1/Tue Jan 22 16:03:00 2002//
--/configure.in/1.1/Tue Jan 22 16:03:00 2002//
--/install-sh/1.1/Tue Jan 22 16:03:00 2002//
--/ltconfig/1.1/Tue Jan 22 16:03:00 2002//
--/ltmain.sh/1.1/Tue Jan 22 16:03:00 2002//
--/missing/1.1/Tue Jan 22 16:03:00 2002//
--/mkinstalldirs/1.1/Tue Jan 22 16:03:00 2002//
--/stamp-h.in/1.1/Tue Jan 22 16:03:00 2002//
--D/doc////
--D/etc////
--D/include////
--D/lib////
--D/login.radius////
--D/man////
--D/patches////
--D/src////
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/CVS/Repository 2002-09-07 12:37:51.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/CVS/Root 2002-09-07 12:37:51.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/doc/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/doc/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/doc/CVS/Entries 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/doc/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,4 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:01 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:01 2002//
--/instop.html/1.1/Tue Jan 22 16:03:01 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/doc/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/doc/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/doc/CVS/Repository 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/doc/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/doc
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/doc/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/doc/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/doc/CVS/Root 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/doc/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/etc/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/etc/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/etc/CVS/Entries 2002-11-09 12:24:42.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/etc/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,13 +0,0 @@
--/dictionary.ascend/1.1/Tue Jan 22 16:03:01 2002//
--/dictionary.compat/1.1/Tue Jan 22 16:03:01 2002//
--/dictionary.merit/1.1/Tue Jan 22 16:03:01 2002//
--/dictionary.microsoft/1.1/Wed Mar 6 13:23:09 2002//
--/issue/1.1/Tue Jan 22 16:03:01 2002//
--/port-id-map/1.1/Tue Jan 22 16:03:01 2002//
--/servers/1.1/Tue Jan 22 16:03:01 2002//
--/Makefile.am/1.4/Sat Nov 9 11:24:42 2002//
--/Makefile.in/1.5/Sat Nov 9 11:24:42 2002//
--/dictionary/1.9/Sat Nov 9 11:24:42 2002//
--/radiusclient.conf.in/1.2/Sat Nov 9 11:24:42 2002//
--/realms/1.1/Sat Oct 5 04:35:24 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/etc/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/etc/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/etc/CVS/Repository 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/etc/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/etc
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/etc/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/etc/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/etc/CVS/Root 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/etc/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/include/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/include/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/include/CVS/Entries 2002-12-04 22:49:09.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/include/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,7 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:01 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:01 2002//
--/includes.h/1.2/Wed Feb 27 15:51:19 2002//
--/messages.h/1.2/Wed Feb 27 15:51:19 2002//
--/pathnames.h/1.2/Wed Feb 27 15:51:19 2002//
--/radiusclient.h/1.9/Wed Dec 4 21:49:09 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/include/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/include/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/include/CVS/Repository 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/include/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/include
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/include/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/include/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/include/CVS/Root 2002-09-07 12:37:52.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/include/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/lib/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/lib/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/lib/CVS/Entries 2002-12-04 22:49:09.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/lib/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,20 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:02 2002//
--/Makefile.in/1.2/Wed Feb 20 02:22:35 2002//
--/clientid.c/1.2/Wed Feb 27 15:51:20 2002//
--/dict.c/1.2/Tue Mar 5 15:14:06 2002//
--/env.c/1.2/Wed Feb 27 15:51:20 2002//
--/ip_util.c/1.2/Wed Feb 27 15:51:20 2002//
--/lock.c/1.2/Wed Feb 27 15:51:20 2002//
--/log.c/1.2/Wed Feb 27 15:51:20 2002//
--/md5.c/1.2/Wed Feb 27 15:51:20 2002//
--/memcmp.c/1.2/Wed Feb 27 15:51:20 2002//
--/sendserver.c/1.4/Tue Apr 2 14:09:35 2002//
--/strcasecmp.c/1.2/Wed Feb 27 15:51:20 2002//
--/strdup.c/1.2/Wed Feb 27 15:51:20 2002//
--/strerror.c/1.2/Wed Feb 27 15:51:20 2002//
--/util.c/1.2/Wed Feb 27 15:51:20 2002//
--/buildreq.c/1.4/Sat Nov 9 11:24:43 2002//
--/config.c/1.3/Sat Nov 9 11:24:43 2002//
--/options.h/1.2/Sat Nov 9 11:24:43 2002//
--/avpair.c/1.3/Wed Dec 4 21:49:09 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/lib/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/lib/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/lib/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/lib/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/lib
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/lib/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/lib/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/lib/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/lib/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/CVS/Entries 2002-09-07 12:37:54.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,5 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:02 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:02 2002//
--/README/1.1/Tue Jan 22 16:03:02 2002//
--/login.radius/1.1/Tue Jan 22 16:03:02 2002//
--D/migs////
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/login.radius
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Entries 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,7 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:02 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:02 2002//
--/README/1.1/Tue Jan 22 16:03:02 2002//
--/ip-down/1.1/Tue Jan 22 16:03:02 2002//
--/ip-up/1.1/Tue Jan 22 16:03:02 2002//
--/login.radius/1.1/Tue Jan 22 16:03:02 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/login.radius/migs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/login.radius/migs/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/man/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/man/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/man/CVS/Entries 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/man/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,3 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:02 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:02 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/man/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/man/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/man/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/man/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/man
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/man/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/man/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/man/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/man/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/patches/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/patches/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/patches/CVS/Entries 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/patches/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,7 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:03 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:03 2002//
--/README/1.1/Tue Jan 22 16:03:03 2002//
--/merit-2.4.21-CHAP.diff/1.1/Tue Jan 22 16:03:04 2002//
--/radiusd-1.16.accounting.diff/1.1/Tue Jan 22 16:03:04 2002//
--/radiusd-1.16.shadow.diff/1.1/Tue Jan 22 16:03:04 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/patches/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/patches/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/patches/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/patches/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/patches
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/patches/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/patches/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/patches/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/patches/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/src/CVS/Entries ppp-cvs-20040427/pppd/plugins/radius/radiusclient/src/CVS/Entries
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/src/CVS/Entries 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/src/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,11 +0,0 @@
--/Makefile.am/1.1/Tue Jan 22 16:03:04 2002//
--/Makefile.in/1.1/Tue Jan 22 16:03:04 2002//
--/local.c/1.1/Tue Jan 22 16:03:04 2002//
--/radacct.c/1.1/Tue Jan 22 16:03:04 2002//
--/radexample-debug/1.1/Tue Jan 22 16:03:04 2002//
--/radexample.c/1.2/Tue Apr 2 14:09:35 2002//
--/radius.c/1.2/Tue Apr 2 14:09:35 2002//
--/radlogin.c/1.1/Tue Jan 22 16:03:04 2002//
--/radlogin.h/1.1/Tue Jan 22 16:03:05 2002//
--/radstatus.c/1.1/Tue Jan 22 16:03:05 2002//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/src/CVS/Repository ppp-cvs-20040427/pppd/plugins/radius/radiusclient/src/CVS/Repository
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/src/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/src/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/radius/radiusclient/src
-diff -ruN ppp-2.4.2/pppd/plugins/radius/radiusclient/src/CVS/Root ppp-cvs-20040427/pppd/plugins/radius/radiusclient/src/CVS/Root
---- ppp-2.4.2/pppd/plugins/radius/radiusclient/src/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/radius/radiusclient/src/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/rp-pppoe/CVS/Entries ppp-cvs-20040427/pppd/plugins/rp-pppoe/CVS/Entries
---- ppp-2.4.2/pppd/plugins/rp-pppoe/CVS/Entries 2002-09-07 12:37:54.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/rp-pppoe/CVS/Entries 1970-01-01 01:00:00.000000000 +0100
-@@ -1,9 +0,0 @@
--/Makefile.linux/1.1/Fri Dec 14 02:55:20 2001//
--/common.c/1.1/Fri Dec 14 02:55:20 2001//
--/config.h/1.1/Fri Dec 14 02:55:20 2001//
--/debug.c/1.1/Fri Dec 14 02:55:20 2001//
--/discovery.c/1.1/Fri Dec 14 02:55:20 2001//
--/if.c/1.1/Fri Dec 14 02:55:20 2001//
--/plugin.c/1.7/Tue Apr 2 13:11:00 2002//
--/pppoe.h/1.1/Fri Dec 14 02:55:20 2001//
--D
-diff -ruN ppp-2.4.2/pppd/plugins/rp-pppoe/CVS/Repository ppp-cvs-20040427/pppd/plugins/rp-pppoe/CVS/Repository
---- ppp-2.4.2/pppd/plugins/rp-pppoe/CVS/Repository 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/rp-pppoe/CVS/Repository 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--ppp/pppd/plugins/rp-pppoe
-diff -ruN ppp-2.4.2/pppd/plugins/rp-pppoe/CVS/Root ppp-cvs-20040427/pppd/plugins/rp-pppoe/CVS/Root
---- ppp-2.4.2/pppd/plugins/rp-pppoe/CVS/Root 2002-09-07 12:37:53.000000000 +0200
-+++ ppp-cvs-20040427/pppd/plugins/rp-pppoe/CVS/Root 1970-01-01 01:00:00.000000000 +0100
-@@ -1 +0,0 @@
--samba.org:/data/cvs
-diff -ruN ppp-2.4.2/pppd/plugins/rp-pppoe/Makefile ppp-cvs-20040427/pppd/plugins/rp-pppoe/Makefile
---- ppp-2.4.2/pppd/plugins/rp-pppoe/Makefile 2004-01-13 04:57:55.000000000 +0100
-+++ ppp-cvs-20040427/pppd/plugins/rp-pppoe/Makefile 1970-01-01 01:00:00.000000000 +0100
-@@ -1,50 +0,0 @@
--# Generated automatically from Makefile.in by configure.
--#***********************************************************************
--#
--# Makefile
--#
--# Makefile for Roaring Penguin's Linux PPPoE plugin.
--#
--# Copyright (C) 2001 Roaring Penguin Software Inc.
--#
--# This program may be distributed according to the terms of the GNU
--# General Public License, version 2 or (at your option) any later version.
--#
--# $Id: Makefile.linux,v 1.2 2004/01/13 03:57:55 paulus Exp $
--#***********************************************************************
--
--# Version is set ONLY IN THE MAKEFILE! Don't delete this!
--VERSION=3.3
--
--COPTS=-O2 -g
--CFLAGS=$(COPTS) -I../../../include/linux
--all: rp-pppoe.so
--
--rp-pppoe.so: libplugin.a plugin.o
-- gcc -o rp-pppoe.so -shared plugin.o libplugin.a
--
--install: all
-- $(INSTALL) -d -m 755 $(LIBDIR)
-- $(INSTALL) -s -c -m 4550 rp-pppoe.so $(LIBDIR)
--
--clean:
-- rm -f *.o *.so
--
--plugin.o: plugin.c
-- gcc '-DRP_VERSION="$(VERSION)"' $(CFLAGS) -I../../.. -c -o plugin.o -fPIC plugin.c
--
--libplugin.a: discovery.o if.o common.o debug.o
-- ar -rc $@ $^
--
--discovery.o: discovery.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o -fPIC discovery.c
--
--if.o: if.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o if.o -fPIC if.c
--
--debug.o: debug.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o debug.o -fPIC debug.c
--
--common.o: common.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o common.o -fPIC common.c
--
-diff -ruN ppp-2.4.2/pppd/pppd.8 ppp-cvs-20040427/pppd/pppd.8
---- ppp-2.4.2/pppd/pppd.8 2004-01-15 06:09:00.000000000 +0100
-+++ ppp-cvs-20040427/pppd/pppd.8 2004-04-27 20:25:12.000000000 +0200
-@@ -1,5 +1,5 @@
- .\" manual page [] for pppd 2.4
--.\" $Id: pppd.8,v 1.76 2004/01/15 05:09:00 paulus Exp $
-+.\" $Id: pppd.8,v 1.77 2004/04/27 18:22:58 fcusack Exp $
- .\" SH section heading
- .\" SS subsection heading
- .\" LP paragraph
-@@ -955,11 +955,11 @@
- Require the use of MPPE, with 128\-bit encryption.
- .TP
- .B require-mschap
--Require the peer to authenticate itself using MS-CHAP [Microsft Challenge
-+Require the peer to authenticate itself using MS-CHAP [Microsoft Challenge
- Handshake Authentication Protocol] authentication.
- .TP
- .B require-mschap-v2
--Require the peer to authenticate itself using MS-CHAPv2 [Microsft Challenge
-+Require the peer to authenticate itself using MS-CHAPv2 [Microsoft Challenge
- Handshake Authentication Protocol, Version 2] authentication.
- .TP
- .B require-eap
-diff -ruN ppp-2.4.2/pppd/tty.c ppp-cvs-20040427/pppd/tty.c
---- ppp-2.4.2/pppd/tty.c 2004-01-13 05:17:59.000000000 +0100
-+++ ppp-cvs-20040427/pppd/tty.c 2004-01-17 06:50:12.000000000 +0100
-@@ -73,7 +73,7 @@
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
--#define RCSID "$Id: tty.c,v 1.13 2004/01/13 04:17:59 paulus Exp $"
-+#define RCSID "$Id: tty.c,v 1.14 2004/01/17 05:47:55 carlsonj Exp $"
-
- #include <stdio.h>
- #include <ctype.h>
-@@ -512,7 +512,9 @@
- {
- char *connector;
- int fdflags;
-+#ifndef __linux__
- struct stat statbuf;
-+#endif
- char numbuf[16];
-
- /*
-diff -ruN ppp-2.4.2/pppdump/bsd-comp.c ppp-cvs-20040427/pppdump/bsd-comp.c
---- ppp-2.4.2/pppdump/bsd-comp.c 1999-04-16 13:34:42.000000000 +0200
-+++ ppp-cvs-20040427/pppdump/bsd-comp.c 2004-01-17 06:50:12.000000000 +0100
-@@ -38,12 +38,14 @@
- */
-
- /*
-- * $Id: bsd-comp.c,v 1.3 1999/04/16 11:35:59 paulus Exp $
-+ * $Id: bsd-comp.c,v 1.4 2004/01/17 05:47:55 carlsonj Exp $
- */
-
- #include <sys/types.h>
-+#include <stdio.h>
- #include <stddef.h>
- #include <stdlib.h>
-+#include <string.h>
- #include "ppp_defs.h"
- #include "ppp-comp.h"
-
-diff -ruN ppp-2.4.2/pppdump/deflate.c ppp-cvs-20040427/pppdump/deflate.c
---- ppp-2.4.2/pppdump/deflate.c 2002-12-06 10:49:16.000000000 +0100
-+++ ppp-cvs-20040427/pppdump/deflate.c 2004-01-17 06:50:12.000000000 +0100
-@@ -33,12 +33,14 @@
- * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
-- * $Id: deflate.c,v 1.4 2002/12/06 09:49:16 paulus Exp $
-+ * $Id: deflate.c,v 1.5 2004/01/17 05:47:55 carlsonj Exp $
- */
-
- #include <sys/types.h>
-+#include <stdio.h>
- #include <stddef.h>
- #include <stdlib.h>
-+#include <string.h>
- #include "ppp_defs.h"
- #include "ppp-comp.h"
- #include "zlib.h"
-diff -ruN ppp-2.4.2/pppdump/pppdump.c ppp-cvs-20040427/pppdump/pppdump.c
---- ppp-2.4.2/pppdump/pppdump.c 2002-12-06 10:17:02.000000000 +0100
-+++ ppp-cvs-20040427/pppdump/pppdump.c 2004-01-17 06:50:12.000000000 +0100
-@@ -35,6 +35,7 @@
- */
- #include <stdio.h>
- #include <unistd.h>
-+#include <stdlib.h>
- #include <time.h>
- #include <sys/types.h>
- #include "ppp_defs.h"
-@@ -53,6 +54,12 @@
- extern int optind;
- extern char *optarg;
-
-+void dumplog();
-+void dumpppp();
-+void show_time();
-+void handle_ccp();
-+
-+int
- main(ac, av)
- int ac;
- char **av;
-@@ -105,6 +112,7 @@
- exit(0);
- }
-
-+void
- dumplog(f)
- FILE *f;
- {
-@@ -244,6 +252,7 @@
-
- unsigned char dbuf[8192];
-
-+void
- dumpppp(f)
- FILE *f;
- {
-@@ -429,6 +438,7 @@
- NULL
- };
-
-+void
- handle_ccp(cp, dp, len)
- struct pkt *cp;
- u_char *dp;
-@@ -485,6 +495,7 @@
- }
- }
-
-+void
- show_time(f, c)
- FILE *f;
- int c;
-diff -ruN ppp-2.4.2/scripts/callback ppp-cvs-20040427/scripts/callback
---- ppp-2.4.2/scripts/callback 1995-08-09 04:49:51.000000000 +0200
-+++ ppp-cvs-20040427/scripts/callback 2004-04-12 07:30:11.000000000 +0200
-@@ -33,7 +33,7 @@
- ABORT '\nNO ANSWER\r' \
- ABORT '\nRINGING\r\n\r\nRINGING\r' \
- '' AT \
-- 'OK-+++\c-OK' 'AT&C0&D2S0=0H0 \
-+ 'OK-+++\c-OK' 'AT&C0&D2S0=0H0' \
- TIMEOUT 30 \
- OK ATDT$TELEPHONE \
- CONNECT '' \
-diff -ruN ppp-2.4.2/scripts/ipv6-down.sample ppp-cvs-20040427/scripts/ipv6-down.sample
---- ppp-2.4.2/scripts/ipv6-down.sample 1999-08-23 08:07:07.000000000 +0200
-+++ ppp-cvs-20040427/scripts/ipv6-down.sample 2004-04-12 07:45:18.000000000 +0200
-@@ -8,24 +8,24 @@
- # Kill the router advertisement daemon on this interface.
- # The killing procedure is copied from RedHat 6.0 initscripts.
-
--DEVICE=$1
-+DEVICE="$1"
-
--PIDFILE=/var/run/radvd-$DEVICE.pid
-+PIDFILE="/var/run/radvd-$DEVICE.pid"
-
--[ -f $PIDFILE ] || exit 0
-+[ -f "$PIDFILE" ] || exit 0
-
--PID=`cat $PIDFILE`
-+PID="$(cat "$PIDFILE")"
- if [ "$PID" != "" ]; then
-- if ps h $PID >/dev/null 2>&1; then
-- kill -TERM $PID
-+ if ps h "$PID" >/dev/null 2>&1; then
-+ kill -TERM "$PID"
- usleep 10000
-- if ps h $PID >/dev/null 2>&1; then
-+ if ps h "$PID" >/dev/null 2>&1; then
- sleep 1
-- if ps h $PID >/dev/null 2>&1; then
-- kill -KILL $PID
-+ if ps h "$PID" >/dev/null 2>&1; then
-+ kill -KILL "$PID"
- fi
- fi
- fi
- fi
-
--rm -f $PIDFILE
-+rm -f "$PIDFILE"
-diff -ruN ppp-2.4.2/scripts/ipv6-up.sample ppp-cvs-20040427/scripts/ipv6-up.sample
---- ppp-2.4.2/scripts/ipv6-up.sample 1999-08-23 08:07:07.000000000 +0200
-+++ ppp-cvs-20040427/scripts/ipv6-up.sample 2004-04-12 07:45:18.000000000 +0200
-@@ -8,26 +8,27 @@
- # Start router advertisements on this link.
- # Based on radvd 0.5.0 behaviour
-
--DEVICE=$1
-+DEVICE="$1"
-
--CFGFILE=/usr/inet6/etc/radvd.conf-$DEVICE
--PIDFILE=/var/run/radvd-$DEVICE.pid
-+CFGFILE="/etc/radvd.conf-$DEVICE"
-+PIDFILE="/var/run/radvd-$DEVICE.pid"
-+EXEFILE="/usr/sbin/radvd"
-
--if [ -x /usr/inet6/sbin/radvd && -f $CFGFILE ]; then
-- touch $PIDFILE
-- if [ ! -f $PIDFILE ]; then
-+if [ -x "$EXEFILE" -a -f "$CFGFILE" ]; then
-+ touch "$PIDFILE"
-+ if [ ! -f "$PIDFILE" ]; then
- echo "error: $PIDFILE is not a regular file. Aborting"
- exit 0
- fi
-
-- PID=`cat $PIDFILE`
-- if [ "$PID" != "" ]; then
-- ps h $PID >/dev/null 2>&1 && exit 0
-+ PID="$(cat "$PIDFILE")"
-+ if [ -n "$PID" ]; then
-+ ps h "$PID" >/dev/null 2>&1 && exit 0
- fi
-
- # radvd 0.5.0 doesn't write a pid-file so we do it here
- # enabling debugging keeps radvd in foreground, putting it
- # on background gives us the PID.
-- /usr/inet6/sbin/radvd -d 1 -C $CFGFILE &
-- echo $! >$PIDFILE
-+ "$EXEFILE" -d 1 -C "$CFGFILE" &
-+ echo $! >"$PIDFILE"
- fi
-diff -ruN ppp-2.4.2/scripts/pon ppp-cvs-20040427/scripts/pon
---- ppp-2.4.2/scripts/pon 2002-11-25 00:30:44.000000000 +0100
-+++ ppp-cvs-20040427/scripts/pon 2004-04-12 07:45:18.000000000 +0200
-@@ -1,10 +1,12 @@
- #!/bin/sh
-
-+PPP_ON_BOOT=/etc/ppp/ppp_on_boot
-+
- case "$1" in
- -*) echo "
- Usage: pon [provider] [arguments]
-
--If pon is invoked without arguments, /etc/ppp/ppp_on_boot file will be
-+If pon is invoked without arguments, $PPP_ON_BOOT file will be
- run, presuming it exists and is executable. Otherwise, a PPP connection
- will be started using settings from /etc/ppp/peers/provider.
- If you specify one argument, a PPP connection will be started using
-@@ -16,8 +18,8 @@
- ;;
- esac
-
--if [ -z "$1" -a -x /etc/ppp/ppp_on_boot ]; then
-- exec /etc/ppp/ppp_on_boot
-+if [ -z "$1" -a -x "$PPP_ON_BOOT" ]; then
-+ exec "$PPP_ON_BOOT"
- fi
-
- if [ -z "$1" -a ! -f /etc/ppp/peers/provider ]; then
-diff -ruN ppp-2.4.2/svr4/Makedefs ppp-cvs-20040427/svr4/Makedefs
---- ppp-2.4.2/svr4/Makedefs 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/Makedefs 2000-06-09 03:36:34.000000000 +0200
-@@ -0,0 +1,16 @@
-+#
-+# defines common to several Makefiles
-+#
-+
-+INSTALL= /usr/sbin/install
-+
-+BINDIR = /usr/local/bin
-+MANDIR = /usr/local/man
-+ETCDIR = /etc/ppp
-+
-+COPTS = -O -Xa
-+
-+# For compiling with gcc, comment out the COPTS definition above and
-+# uncomment the next 2 definitions.
-+#CC = gcc
-+#COPTS = -O2
-diff -ruN ppp-2.4.2/svr4/Makedefs.sol2 ppp-cvs-20040427/svr4/Makedefs.sol2
---- ppp-2.4.2/svr4/Makedefs.sol2 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/Makedefs.sol2 1999-09-21 22:50:31.000000000 +0200
-@@ -0,0 +1,59 @@
-+#
-+# Generic make definitions for Solaris 2
-+#
-+# $Id: Makedefs.sol2,v 1.3 1999/09/21 20:37:20 masputra Exp $
-+#
-+
-+include ../svr4/Makedefs
-+
-+CPPFLAGS = -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-+CFLAGS = $(CPPFLAGS) $(COPTS)
-+
-+# lint-specific variables
-+LINT = lint
-+LINT_OPT_32 =
-+LINT_OPT_64 = -Xarch=v9 -errchk=longptr64
-+
-+LINT_32 =
-+LINT_32 += -erroff=E_BAD_PTR_CAST_ALIGN
-+LINT_32 += -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-+LINT_32 += -erroff=E_SUSPICIOUS_COMPARISON
-+LINT_32 += -erroff=E_CAST_UINT_TO_SIGNED_INT
-+LINT_32 += -erroff=E_PASS_UINT_TO_SIGNED_INT
-+LINT_32 += -erroff=E_INVALID_ANNOTATION_NAME
-+LINT_32 += -erroff=E_FUNC_ARG_UNUSED
-+# This might be needed, but zlib.c and vjcompress.c will squawk
-+# when not ignored
-+LINT_32 += -erroff=E_CASE_FALLTHRU
-+LINT_32 += -erroff=E_RET_INT_IMPLICITLY
-+LINT_32 += -erroff=E_FUNC_NO_RET_VAL
-+# Some STREAMS macros will be noisy too when this isn't ignored
-+LINT_32 += -erroff=E_CONSTANT_CONDITION
-+LINT_32 += -erroff=E_CONST_EXPR
-+
-+# Extra noise suppressant for 64-bit
-+EXTRA_OFF =
-+EXTRA_OFF += -erroff=E_CAST_INT_TO_SMALL_INT
-+EXTRA_OFF += -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-+EXTRA_OFF += -erroff=E_CAST_TO_PTR_FROM_INT
-+EXTRA_OFF += -erroff=E_ASSIGN_INT_TO_SMALL_INT
-+EXTRA_OFF += -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-+EXTRA_OFF += -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-+EXTRA_OFF += -erroff=E_CONST_PROMOTED_LONG_LONG
-+EXTRA_OFF += -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-+EXTRA_OFF += -erroff=E_PASS_INT_FROM_BIG_CONST
-+EXTRA_OFF += -erroff=E_COMP_INT_WITH_LARGE_INT
-+EXTRA_OFF += -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-+EXTRA_OFF += -erroff=E_ASSIGN_NARROW_CONV
-+EXTRA_OFF += -erroff=E_PASS_INT_TO_SMALL_INT
-+EXTRA_OFF += -erroff=E_PTR_CONV_LOSES_BITS
-+
-+LINT_64 = $(LINT_32)
-+LINT_64 += $(EXTRA_OFF)
-+
-+LINTFLAGS64 = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-+LINT64 = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-+
-+LINTFLAGS32 = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-+LINT32 = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-+
-diff -ruN ppp-2.4.2/svr4/Makefile.sol2 ppp-cvs-20040427/svr4/Makefile.sol2
---- ppp-2.4.2/svr4/Makefile.sol2 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/Makefile.sol2 1999-09-21 22:50:32.000000000 +0200
-@@ -0,0 +1,66 @@
-+#
-+# Makefile for STREAMS modules for Solaris 2.
-+#
-+# $Id: Makefile.sol2,v 1.18 1999/09/21 20:37:20 masputra Exp $
-+#
-+
-+include Makedefs.sol2
-+
-+COPTS += -xO2 -xspace -W0,-Lt
-+
-+COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-+ ppp_comp_mod.o
-+
-+all: ppp ppp_ahdl ppp_comp
-+
-+ppp: ppp.o ppp_mod.o
-+ ld -r -o $@ ppp.o ppp_mod.o
-+ chmod +x $@
-+
-+ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
-+ ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
-+ chmod +x $@
-+
-+ppp_comp: $(COMP_OBJS)
-+ ld -r -o $@ $(COMP_OBJS)
-+ chmod +x $@
-+
-+bsd-comp.o: ../modules/bsd-comp.c
-+ $(CC) $(CFLAGS) -c $?
-+deflate.o: ../modules/deflate.c
-+ $(CC) $(CFLAGS) -c $?
-+ppp.o: ../modules/ppp.c
-+ $(CC) $(CFLAGS) -c $?
-+ppp_mod.o: ppp_mod.c
-+ $(CC) $(CFLAGS) -c $?
-+ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-+ $(CC) $(CFLAGS) -c $?
-+ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-+ $(CC) $(CFLAGS) -c $?
-+ppp_comp.o: ../modules/ppp_comp.c
-+ $(CC) $(CFLAGS) -c $?
-+ppp_comp_mod.o: ppp_comp_mod.c
-+ $(CC) $(CFLAGS) -c $?
-+vjcompress.o: ../modules/vjcompress.c
-+ $(CC) $(CFLAGS) -c $?
-+zlib.o: ../common/zlib.c
-+ $(CC) $(CFLAGS) -c $?
-+
-+install:
-+ cp ppp ppp.conf /kernel/drv
-+ cp ppp_comp ppp_ahdl /kernel/strmod
-+ if grep clone:ppp /etc/minor_perm; then :; else \
-+ echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-+ /usr/sbin/rem_drv ppp 2>/dev/null || true
-+ /usr/sbin/add_drv ppp
-+
-+SRCS = ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
-+ ../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-+ ../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-+
-+lint:
-+ $(LINT32) $(SRCS)
-+
-+clean:
-+ rm -f ppp ppp_comp ppp_ahdl *.o *~ core
-+ rm -f *.ln
-diff -ruN ppp-2.4.2/svr4/Makefile.sol2-64 ppp-cvs-20040427/svr4/Makefile.sol2-64
---- ppp-2.4.2/svr4/Makefile.sol2-64 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/Makefile.sol2-64 1999-09-21 22:50:33.000000000 +0200
-@@ -0,0 +1,85 @@
-+#
-+# Makefile for 64-bit STREAMS modules for Solaris 2.
-+#
-+# $Id: Makefile.sol2-64,v 1.3 1999/09/21 20:37:20 masputra Exp $
-+#
-+
-+include Makedefs.sol2
-+
-+# Sun's cc flag for LP64 compilation / linkage
-+COPTS += -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-+
-+# subdirectory where 64-bit objects / binaries will be placed
-+LP64DIR = sparcv9
-+
-+# Name of legacy Makefile (for 32-bit binaries)
-+STD_MAKE = Makefile.sol2
-+
-+COMP_OBJS = $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
-+ $(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
-+ $(LP64DIR)/ppp_comp_mod.o
-+
-+all: std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-+
-+std_objs:
-+ $(MAKE) -f $(STD_MAKE) all
-+
-+ppp: $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-+ ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-+ chmod +x $(LP64DIR)/$@
-+
-+ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-+ ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-+ chmod +x $(LP64DIR)/$@
-+
-+ppp_comp: $(COMP_OBJS)
-+ ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
-+ chmod +x $(LP64DIR)/$@
-+
-+$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/deflate.o: ../modules/deflate.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/ppp.o: ../modules/ppp.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/ppp_mod.o: ppp_mod.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/ppp_comp.o: ../modules/ppp_comp.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+$(LP64DIR)/zlib.o: ../common/zlib.c
-+ $(CC) $(CFLAGS) -c $? -o $@
-+
-+$(LP64DIR):
-+ mkdir -m 755 -p $@
-+
-+install:
-+ cp ppp ppp.conf /kernel/drv
-+ cp ppp_comp ppp_ahdl /kernel/strmod
-+ cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
-+ cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
-+ if grep clone:ppp /etc/minor_perm; then :; else \
-+ echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-+ /usr/sbin/rem_drv ppp 2>/dev/null || true
-+ /usr/sbin/add_drv ppp
-+
-+SRCS = ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
-+ ../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-+ ../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-+
-+lint:
-+ $(LINT64) $(SRCS)
-+
-+lint-32:
-+ $(LINT32) $(SRCS)
-+
-+clean:
-+ $(MAKE) -f $(STD_MAKE) clean
-+ rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
-diff -ruN ppp-2.4.2/svr4/Makefile.top ppp-cvs-20040427/svr4/Makefile.top
---- ppp-2.4.2/svr4/Makefile.top 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/Makefile.top 1999-04-01 14:37:44.000000000 +0200
-@@ -0,0 +1,50 @@
-+#
-+# ppp top level makefile for SVR4 and Solaris 2
-+#
-+# $Id: Makefile.top,v 1.8 1999/04/01 11:44:55 paulus Exp $
-+#
-+
-+include svr4/Makedefs
-+
-+all:
-+ cd chat; $(MAKE) all
-+ cd pppd; $(MAKE) all
-+ cd pppstats; $(MAKE) all
-+ cd pppdump; $(MAKE) all
-+ cd svr4; $(MAKE) all
-+
-+install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-+
-+install-progs:
-+ cd chat; $(MAKE) install
-+ cd pppd; $(MAKE) install
-+ cd pppstats; $(MAKE) install
-+ cd pppdump; $(MAKE) install
-+ cd svr4; $(MAKE) install
-+
-+install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-+ $(ETCDIR)/chap-secrets
-+
-+$(ETCDIR)/options:
-+ cp etc.ppp/options $@
-+ chmod go-w $@
-+$(ETCDIR)/pap-secrets:
-+ $(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-+$(ETCDIR)/chap-secrets:
-+ $(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-+
-+$(BINDIR):
-+ mkdir -m 755 -p $@
-+$(MANDIR)/man8:
-+ mkdir -m 755 -p $@
-+$(ETCDIR):
-+ mkdir -m 755 -p $@
-+
-+clean:
-+ rm -f *~
-+ cd chat; $(MAKE) clean
-+ cd pppd; $(MAKE) clean
-+ cd pppstats; $(MAKE) clean
-+ cd pppdump; $(MAKE) clean
-+ cd svr4; $(MAKE) clean
-+
-diff -ruN ppp-2.4.2/svr4/ppp.Master ppp-cvs-20040427/svr4/ppp.Master
---- ppp-2.4.2/svr4/ppp.Master 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp.Master 1995-10-27 04:58:28.000000000 +0100
-@@ -0,0 +1 @@
-+ppp - Sciof ppp 0 0 1 128 -1
-diff -ruN ppp-2.4.2/svr4/ppp.Node ppp-cvs-20040427/svr4/ppp.Node
---- ppp-2.4.2/svr4/ppp.Node 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp.Node 1995-10-27 04:58:36.000000000 +0100
-@@ -0,0 +1 @@
-+clone ppp c ppp
-diff -ruN ppp-2.4.2/svr4/ppp.System ppp-cvs-20040427/svr4/ppp.System
---- ppp-2.4.2/svr4/ppp.System 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp.System 1995-10-27 04:58:37.000000000 +0100
-@@ -0,0 +1 @@
-+ppp Y 1 0 0 0 0 0 0 0
-diff -ruN ppp-2.4.2/svr4/ppp.conf ppp-cvs-20040427/svr4/ppp.conf
---- ppp-2.4.2/svr4/ppp.conf 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp.conf 1995-06-01 06:39:00.000000000 +0200
-@@ -0,0 +1 @@
-+name="ppp" parent="pseudo" instance=0;
-diff -ruN ppp-2.4.2/svr4/ppp_ahdl.Master ppp-cvs-20040427/svr4/ppp_ahdl.Master
---- ppp-2.4.2/svr4/ppp_ahdl.Master 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_ahdl.Master 1995-10-27 04:58:32.000000000 +0100
-@@ -0,0 +1 @@
-+ppp_ahdl - iSf phdl 0 0 1 1 -1
-diff -ruN ppp-2.4.2/svr4/ppp_ahdl.System ppp-cvs-20040427/svr4/ppp_ahdl.System
---- ppp-2.4.2/svr4/ppp_ahdl.System 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_ahdl.System 1995-10-27 04:58:38.000000000 +0100
-@@ -0,0 +1 @@
-+ppp_ahdl Y 1 0 0 0 0 0 0 0
-diff -ruN ppp-2.4.2/svr4/ppp_ahdlc_mod.c ppp-cvs-20040427/svr4/ppp_ahdlc_mod.c
---- ppp-2.4.2/svr4/ppp_ahdlc_mod.c 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_ahdlc_mod.c 1995-12-11 06:21:02.000000000 +0100
-@@ -0,0 +1,49 @@
-+#include <sys/types.h>
-+#include <sys/param.h>
-+#include <sys/conf.h>
-+#include <sys/modctl.h>
-+#include <sys/sunddi.h>
-+
-+extern struct streamtab ppp_ahdlcinfo;
-+
-+static struct fmodsw fsw = {
-+ "ppp_ahdl",
-+ &ppp_ahdlcinfo,
-+ D_NEW | D_MP | D_MTQPAIR
-+};
-+
-+extern struct mod_ops mod_strmodops;
-+
-+static struct modlstrmod modlstrmod = {
-+ &mod_strmodops,
-+ "PPP async HDLC module",
-+ &fsw
-+};
-+
-+static struct modlinkage modlinkage = {
-+ MODREV_1,
-+ (void *) &modlstrmod,
-+ NULL
-+};
-+
-+/*
-+ * Entry points for modloading.
-+ */
-+int
-+_init(void)
-+{
-+ return mod_install(&modlinkage);
-+}
-+
-+int
-+_fini(void)
-+{
-+ return mod_remove(&modlinkage);
-+}
-+
-+int
-+_info(mip)
-+ struct modinfo *mip;
-+{
-+ return mod_info(&modlinkage, mip);
-+}
-diff -ruN ppp-2.4.2/svr4/ppp_comp.Master ppp-cvs-20040427/svr4/ppp_comp.Master
---- ppp-2.4.2/svr4/ppp_comp.Master 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_comp.Master 1995-10-27 04:58:34.000000000 +0100
-@@ -0,0 +1 @@
-+ppp_comp - iSf pcmp 0 0 1 1 -1
-diff -ruN ppp-2.4.2/svr4/ppp_comp.System ppp-cvs-20040427/svr4/ppp_comp.System
---- ppp-2.4.2/svr4/ppp_comp.System 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_comp.System 1995-10-27 04:58:40.000000000 +0100
-@@ -0,0 +1 @@
-+ppp_comp Y 1 0 0 0 0 0 0 0
-diff -ruN ppp-2.4.2/svr4/ppp_comp_mod.c ppp-cvs-20040427/svr4/ppp_comp_mod.c
---- ppp-2.4.2/svr4/ppp_comp_mod.c 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_comp_mod.c 2002-12-06 10:50:10.000000000 +0100
-@@ -0,0 +1,89 @@
-+/*
-+ * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
-+ *
-+ * Copyright (c) 1994 Paul Mackerras. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ *
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ *
-+ * 3. The name(s) of the authors of this software must not be used to
-+ * endorse or promote products derived from this software without
-+ * prior written permission.
-+ *
-+ * 4. Redistributions of any form whatsoever must retain the following
-+ * acknowledgment:
-+ * "This product includes software developed by Paul Mackerras
-+ * <paulus@samba.org>".
-+ *
-+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
-+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
-+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
-+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
-+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ * $Id: ppp_comp_mod.c,v 1.3 2002/12/06 09:49:16 paulus Exp $
-+ */
-+
-+/*
-+ * This file is used under Solaris 2.
-+ */
-+#include <sys/types.h>
-+#include <sys/param.h>
-+#include <sys/conf.h>
-+#include <sys/modctl.h>
-+#include <sys/sunddi.h>
-+
-+extern struct streamtab ppp_compinfo;
-+
-+static struct fmodsw fsw = {
-+ "ppp_comp",
-+ &ppp_compinfo,
-+ D_NEW | D_MP | D_MTQPAIR
-+};
-+
-+extern struct mod_ops mod_strmodops;
-+
-+static struct modlstrmod modlstrmod = {
-+ &mod_strmodops,
-+ "PPP compression module",
-+ &fsw
-+};
-+
-+static struct modlinkage modlinkage = {
-+ MODREV_1,
-+ (void *) &modlstrmod,
-+ NULL
-+};
-+
-+/*
-+ * Entry points for modloading.
-+ */
-+int
-+_init(void)
-+{
-+ return mod_install(&modlinkage);
-+}
-+
-+int
-+_fini(void)
-+{
-+ return mod_remove(&modlinkage);
-+}
-+
-+int
-+_info(mip)
-+ struct modinfo *mip;
-+{
-+ return mod_info(&modlinkage, mip);
-+}
-diff -ruN ppp-2.4.2/svr4/ppp_mod.c ppp-cvs-20040427/svr4/ppp_mod.c
---- ppp-2.4.2/svr4/ppp_mod.c 1970-01-01 01:00:00.000000000 +0100
-+++ ppp-cvs-20040427/svr4/ppp_mod.c 2002-12-06 10:50:10.000000000 +0100
-@@ -0,0 +1,182 @@
-+/*
-+ * ppp_mod.c - modload support for PPP pseudo-device driver.
-+ *
-+ * Copyright (c) 1994 Paul Mackerras. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ *
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ *
-+ * 3. The name(s) of the authors of this software must not be used to
-+ * endorse or promote products derived from this software without
-+ * prior written permission.
-+ *
-+ * 4. Redistributions of any form whatsoever must retain the following
-+ * acknowledgment:
-+ * "This product includes software developed by Paul Mackerras
-+ * <paulus@samba.org>".
-+ *
-+ * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
-+ * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
-+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
-+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
-+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ * $Id: ppp_mod.c,v 1.4 2002/12/06 09:49:16 paulus Exp $
-+ */
-+
-+/*
-+ * This file is used under Solaris 2.
-+ */
-+
-+#include <sys/types.h>
-+#include <sys/param.h>
-+#include <sys/stat.h>
-+#include <sys/conf.h>
-+#include <sys/modctl.h>
-+#include <sys/sunddi.h>
-+#include <sys/ksynch.h>
-+
-+#ifdef __STDC__
-+#define __P(x) x
-+#else
-+#define __P(x) ()
-+#endif
-+
-+static int ppp_identify __P((dev_info_t *));
-+static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-+static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-+static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-+
-+extern struct streamtab pppinfo;
-+extern krwlock_t ppp_lower_lock;
-+
-+static dev_info_t *ppp_dip;
-+
-+static struct cb_ops cb_ppp_ops = {
-+ nulldev, nulldev, nodev, nodev, /* cb_open, ... */
-+ nodev, nodev, nodev, nodev, /* cb_dump, ... */
-+ nodev, nodev, nodev, nochpoll, /* cb_devmap, ... */
-+ ddi_prop_op, /* cb_prop_op */
-+ &pppinfo, /* cb_stream */
-+ D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL /* cb_flag */
-+};
-+
-+static struct dev_ops ppp_ops = {
-+ DEVO_REV, /* devo_rev */
-+ 0, /* devo_refcnt */
-+ ppp_devinfo, /* devo_getinfo */
-+ ppp_identify, /* devo_identify */
-+ nulldev, /* devo_probe */
-+ ppp_attach, /* devo_attach */
-+ ppp_detach, /* devo_detach */
-+ nodev, /* devo_reset */
-+ &cb_ppp_ops, /* devo_cb_ops */
-+ NULL /* devo_bus_ops */
-+};
-+
-+/*
-+ * Module linkage information
-+ */
-+
-+static struct modldrv modldrv = {
-+ &mod_driverops, /* says this is a pseudo driver */
-+ "PPP-2.3 multiplexing driver",
-+ &ppp_ops /* driver ops */
-+};
-+
-+static struct modlinkage modlinkage = {
-+ MODREV_1,
-+ (void *) &modldrv,
-+ NULL
-+};
-+
-+int
-+_init(void)
-+{
-+ return mod_install(&modlinkage);
-+}
-+
-+int
-+_fini(void)
-+{
-+ return mod_remove(&modlinkage);
-+}
-+
-+int
-+_info(mip)
-+ struct modinfo *mip;
-+{
-+ return mod_info(&modlinkage, mip);
-+}
-+
-+static int
-+ppp_identify(dip)
-+ dev_info_t *dip;
-+{
-+ return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
-+ DDI_NOT_IDENTIFIED;
-+}
-+
-+static int
-+ppp_attach(dip, cmd)
-+ dev_info_t *dip;
-+ ddi_attach_cmd_t cmd;
-+{
-+
-+ if (cmd != DDI_ATTACH)
-+ return DDI_FAILURE;
-+ if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
-+ == DDI_FAILURE) {
-+ ddi_remove_minor_node(dip, NULL);
-+ return DDI_FAILURE;
-+ }
-+ rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
-+ return DDI_SUCCESS;
-+}
-+
-+static int
-+ppp_detach(dip, cmd)
-+ dev_info_t *dip;
-+ ddi_detach_cmd_t cmd;
-+{
-+ rw_destroy(&ppp_lower_lock);
-+ ddi_remove_minor_node(dip, NULL);
-+ return DDI_SUCCESS;
-+}
-+
-+static int
-+ppp_devinfo(dip, cmd, arg, result)
-+ dev_info_t *dip;
-+ ddi_info_cmd_t cmd;
-+ void *arg;
-+ void **result;
-+{
-+ int error;
-+
-+ error = DDI_SUCCESS;
-+ switch (cmd) {
-+ case DDI_INFO_DEVT2DEVINFO:
-+ if (ppp_dip == NULL)
-+ error = DDI_FAILURE;
-+ else
-+ *result = (void *) ppp_dip;
-+ break;
-+ case DDI_INFO_DEVT2INSTANCE:
-+ *result = NULL;
-+ break;
-+ default:
-+ error = DDI_FAILURE;
-+ }
-+ return error;
-+}
+++ /dev/null
---- ppp-2.4.0b4.orig/pppd/pathnames.h
-+++ ppp-2.4.0b4/pppd/pathnames.h
-@@ -26,7 +26,7 @@
- #define _PATH_AUTHUP _ROOT_PATH "/etc/ppp/auth-up"
- #define _PATH_AUTHDOWN _ROOT_PATH "/etc/ppp/auth-down"
- #define _PATH_TTYOPT _ROOT_PATH "/etc/ppp/options."
--#define _PATH_CONNERRS _ROOT_PATH "/etc/ppp/connect-errors"
-+#define _PATH_CONNERRS _ROOT_PATH "/var/log/ppp-connect-errors"
- #define _PATH_PEERFILES _ROOT_PATH "/etc/ppp/peers/"
- #define _PATH_RESOLV _ROOT_PATH "/etc/ppp/resolv.conf"
-
+++ /dev/null
---- ppp-2.4.0b4.orig/scripts/README
-+++ ppp-2.4.0b4/scripts/README
-@@ -141,3 +141,17 @@
- are escaped. This may need to be modified depending on the ssh (or
- pseudo-tty) implementation which may differ across platforms, for further
- optimizations.
-+
-+------------------------------------------------------------------------
-+
-+12. pon, poff and ip-up
-+
-+These are modified version of the pon/poff/ip-up scripts contributed by Yann
-+Dirson <dirson@debian.org>. They allow you to call "pon quick" respectively
-+"pon quick my-isp" to just call the provider for running you ip-up scripts in
-+/etc/ppp/ip-up.d. This can be useful to check for incoming/flush outgoing
-+mail, without the necessary delay before hangup introduced by diald or such.
-+
-+These scripts break the possibility to connect to multiple ISPs at once, so
-+they are included only here.
-+
+++ /dev/null
---- ppp-2.4.0b4.orig/scripts/redialer
-+++ ppp-2.4.0b4/scripts/redialer
-@@ -1,96 +1,69 @@
- #!/bin/sh
--###################################################################
- #
--# These parameters control the attack dialing sequence.
-+# A chatscript that will attempt to dial multiple numbers in sequence, until
-+# you get connected.
- #
--# Maximum number of attempts to reach the telephone number(s)
--MAX_ATTEMPTS=10
--
--# Delay between each of the attempts. This is a parameter to sleep
--# so use "15s" for 15 seconds, "1m" for 1 minute, etc.
--SLEEP_DELAY=15s
--
--###################################################################
-+# To use: edit /etc/peers/provider, and change the connect line to read:
-+# connect "/usr/local/bin/redialer"
- #
--# This is a list of telephone numbers. Add new numbers if you wish
--# and see the function 'callall' below for the dial process.
--PHONE1=555-1212
--PHONE2=411
-+# See below for configuration.
-
--###################################################################
-+# This is a list of chatscripts to use to get connected, and (optional)
-+# telephone numbers to call for each of those chatscripts.
- #
--# If you use the ppp-on script, then these are passed to this routine
--# automatically. There is no need to define them here. If not, then
--# you will need to set the values.
--#
--ACCOUNT=my_account_name
--PASSWORD=my_password
-+# Note that in the chatscripts, you may use #NUMBER#, this will be replaced
-+# with the number it is calling. You might want to use this to only have one
-+# chatscript that is used for all numbers, or you might need multiple
-+# chatscripts.
-
--###################################################################
--#
--# Function to initialize the modem and ensure that it is in command
--# state. This may not be needed, but it doesn't hurt.
--#
--function initialize
--{
-- chat -v TIMEOUT 3 '' AT 'OK-+++\c-OK'
-- return
--}
-+PHONE1=123456789
-+CHAT1=/etc/chatscripts/provider
-
--###################################################################
--#
--# Script to dial a telephone
--#
--function callnumber
--{
--chat -v \
-- ABORT '\nBUSY\r' \
-- ABORT '\nNO ANSWER\r' \
-- ABORT '\nRINGING\r\n\r\nRINGING\r' \
-- '' ATDT$1 \
-- CONNECT '' \
-- ogin:--ogin: $ACCOUNT \
-- assword: $PASSWORD
--#
--# If the connection was successful then end the whole script with a
--# success.
--#
-- if [ "$?" = "0" ]; then
-- exit 0
-- fi
-+PHONE2=912345678
-+CHAT2=/etc/chatscripts/provider
-
-- return
--}
-+PHONE3=891234567
-+CHAT3=/etc/chatscripts/provider
-
--###################################################################
--#
--# Script to dial any telephone number
--#
--function callall
--{
--# echo "dialing attempt number: $1" >/dev/console
-- callnumber $PHONE1
--# callnumber $PHONE2
--}
-+PHONE4=789123456
-+CHAT4=/etc/chatscripts/provider
-
--###################################################################
--#
--# Initialize the modem to ensure that it is in the command state
--#
--initialize
--if [ ! "$?" = "0" ]; then
-- exit 1
--fi
-+PHONE5=001234567
-+CHAT5=/etc/chatscripts/provider
-
-+# How long to sleep between retries:
- #
--# Dial telephone numbers until one answers
--#
-+# Note that this is a parameter to sleep so use "15s" for 15 seconds,
-+# "1m" for 1 minute, etc
-+SLEEP_DELAY=1s
-+
-+# The code below does the dialing.
-+
- attempt=0
- while : ; do
-- attempt=`expr $attempt + 1`
-- callall $attempt
-- if [ "$attempt" = "$MAX_ATTEMPTS" ]; then
-- exit 1
-- fi
-- sleep "$SLEEP_DELAY"
-+ attempt=`expr $attempt + 1`
-+ NUMBER=`eval echo '$PHONE'$attempt`
-+ CHAT=`eval echo '$CHAT'$attempt`
-+ if [ ! "$CHAT" ]; then
-+ attempt=0
-+ else
-+ logger "Dialing attempt number: $attempt"
-+ sed s/#NUMBER#/$NUMBER/ $CHAT >/etc/chatscripts/tmpchat
-+ /usr/sbin/chat -v -f /etc/chatscripts/tmpchat
-+ rm -f /etc/chatscripts/tmpchat
-+ case $? in
-+ 0) logger Connection established ; exit 0;;
-+ 1) logger chat: exit 1, see manpage for details. ; exit 1;;
-+ 2) logger chat: exit 2, see manpage for details. ; exit 2;;
-+ 3) logger chat: exit 3, see manpage for details. ;;
-+ 4) logger Line busy. ;;
-+ 5) logger No Carrier. ;;
-+ 6) logger A call is coming. Exiting! ; exit 1;;
-+ 7) logger No dialtone. ;;
-+ 8) logger An error occured. Exiting! ; exit 1;;
-+ *) logger chat: exit $?, see manpage for details. ;;
-+ esac
-+ logger "Waiting $SLEEP_DELAY seconds before next try."
-+ sleep $SLEEP_DELAY
-+ fi
- done
+++ /dev/null
---- ppp-2.4.1/pppd/ipcp.c Thu Mar 8 06:11:12 2001
-+++ ppp-2.4.1-new/pppd/ipcp.c Tue Jun 19 15:35:36 2001
-@@ -1734,7 +1734,7 @@
- */
- if (ipcp_script_state == s_down && ipcp_script_pid == 0) {
- ipcp_script_state = s_up;
-- ipcp_script(_PATH_IPUP);
-+ ipcp_script(path_ipup);
- }
- }
-
-@@ -1777,7 +1777,7 @@
- /* Execute the ip-down script */
- if (ipcp_script_state == s_up && ipcp_script_pid == 0) {
- ipcp_script_state = s_down;
-- ipcp_script(_PATH_IPDOWN);
-+ ipcp_script(path_ipdown);
- }
- }
-
-@@ -1828,13 +1828,13 @@
- case s_up:
- if (ipcp_fsm[0].state != OPENED) {
- ipcp_script_state = s_down;
-- ipcp_script(_PATH_IPDOWN);
-+ ipcp_script(path_ipdown);
- }
- break;
- case s_down:
- if (ipcp_fsm[0].state == OPENED) {
- ipcp_script_state = s_up;
-- ipcp_script(_PATH_IPUP);
-+ ipcp_script(path_ipup);
- }
- break;
- }
-
---- ppp-2.4.1/pppd/main.c Tue Mar 13 06:56:19 2001
-+++ ppp-2.4.1-new/pppd/main.c Tue Jun 19 15:35:36 2001
-@@ -233,6 +233,9 @@
- struct protent *protp;
- char numbuf[16];
-
-+ strlcpy(path_ipup, "/etc/ppp/ip-up", sizeof(path_ipup));
-+ strlcpy(path_ipdown, "/etc/ppp/ip-down", sizeof(path_ipdown));
-+
- link_stats_valid = 0;
- new_phase(PHASE_INITIALIZE);
-
-
---- ppp-2.4.1/pppd/options.c Tue Mar 13 06:56:19 2001
-+++ ppp-2.4.1-new/pppd/options.c Tue Jun 19 15:38:32 2001
-@@ -85,6 +85,8 @@
- bool dump_options; /* print out option values */
- bool dryrun; /* print out option values and exit */
- char *domain; /* domain name set by domain option */
-+char path_ipup[MAXPATHLEN]; /* pathname of ip-up script */
-+char path_ipdown[MAXPATHLEN];/* pathname of ip-down script */
-
- extern option_t auth_options[];
- extern struct stat devstat;
-@@ -231,6 +233,12 @@
- "Print out option values after parsing all options", 1 },
- { "dryrun", o_bool, &dryrun,
- "Stop after parsing, printing, and checking options", 1 },
-+ { "ip-up-script", o_string, path_ipup,
-+ "Set pathname of ip-up script",
-+ OPT_PRIV|OPT_STATIC, NULL, MAXPATHLEN },
-+ { "ip-down-script", o_string, path_ipdown,
-+ "Set pathname of ip-down script",
-+ OPT_PRIV|OPT_STATIC, NULL, MAXPATHLEN },
-
- #ifdef HAVE_MULTILINK
- { "multilink", o_bool, &multilink,
-
---- ppp-2.4.1/pppd/pathnames.h Thu Mar 8 06:15:37 2001
-+++ ppp-2.4.1-new/pppd/pathnames.h Tue Jun 19 15:35:36 2001
-@@ -21,8 +21,6 @@
- #define _PATH_UPAPFILE _ROOT_PATH "/etc/ppp/pap-secrets"
- #define _PATH_CHAPFILE _ROOT_PATH "/etc/ppp/chap-secrets"
- #define _PATH_SYSOPTIONS _ROOT_PATH "/etc/ppp/options"
--#define _PATH_IPUP _ROOT_PATH "/etc/ppp/ip-up"
--#define _PATH_IPDOWN _ROOT_PATH "/etc/ppp/ip-down"
- #define _PATH_AUTHUP _ROOT_PATH "/etc/ppp/auth-up"
- #define _PATH_AUTHDOWN _ROOT_PATH "/etc/ppp/auth-down"
- #define _PATH_TTYOPT _ROOT_PATH "/etc/ppp/options."
-
---- ppp-2.4.1/pppd/pppd.h Tue Mar 13 06:54:37 2001
-+++ ppp-2.4.1-new/pppd/pppd.h Tue Jun 19 15:39:39 2001
-@@ -272,6 +272,8 @@
- extern char *bundle_name; /* bundle name for multilink */
- extern bool dump_options; /* print out option values */
- extern bool dryrun; /* check everything, print options, exit */
-+extern char path_ipup[MAXPATHLEN]; /* pathname of ip-up script */
-+extern char path_ipdown[MAXPATHLEN]; /* pathname of ip-down script */
-
- #ifdef PPP_FILTER
- extern struct bpf_program pass_filter; /* Filter for pkts to pass */
+++ /dev/null
---- ppp/pppd/plugins/rp-pppoe/plugin.c.orig 2003-04-07 02:09:05.000000000 +0200
-+++ ppp/pppd/plugins/rp-pppoe/plugin.c 2003-12-03 22:15:07.000000000 +0100
-@@ -114,6 +114,57 @@
- return 1;
- }
-
-+/* from <linux/if.h> */
-+#define IFF_UP 0x1
-+#define IFF_RUNNING 0x40
-+
-+static short ifrflags_old;
-+
-+static int interface_change(const char* ifname, int up)
-+{
-+ int fd;
-+ struct ifreq ifr;
-+
-+ if (!up && ifrflags_old != 0) {
-+ return 0;
-+ }
-+
-+ fd = socket(AF_INET, SOCK_DGRAM, 0);
-+ if (fd < 0) {
-+ warn("socket(AF_INET, SOCK_DGRAM, 0): %s", strerror(errno));
-+ return -1;
-+ }
-+
-+ strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-+ if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
-+ warn("%s: unknown interface: %s", ifname, strerror(errno));
-+ return -1;
-+ }
-+ strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-+ if (up) {
-+ ifrflags_old = ifr.ifr_flags & (IFF_UP | IFF_RUNNING);
-+ ifr.ifr_flags |= (IFF_UP | IFF_RUNNING);
-+ } else {
-+ ifr.ifr_flags &= ~(IFF_UP | IFF_RUNNING);
-+ }
-+ if (ioctl(fd, SIOCSIFFLAGS, &ifr) < 0) {
-+ warn("SIOCSIFFLAGS: %s", strerror(errno));
-+ return -1;
-+ }
-+ close(fd);
-+ return 0;
-+}
-+
-+static int interface_up (const char *ifname)
-+{
-+ return interface_change(ifname,1);
-+}
-+
-+static int interface_down (const char* ifname)
-+{
-+ return interface_change(ifname,0);
-+}
-+
- /**********************************************************************
- * %FUNCTION: PPPOEConnectDevice
- * %ARGUMENTS:
-@@ -142,6 +193,8 @@
- conn->peerEth[i] = (unsigned char) mac[i];
- }
- } else {
-+ if (interface_up(conn->ifName) < 0)
-+ return -1;
- discovery(conn);
- if (conn->discoveryState != STATE_SESSION) {
- fatal("Unable to complete PPPoE Discovery");
-@@ -243,6 +296,8 @@
- return;
- }
- close(conn->sessionSocket);
-+ if (interface_down(conn->ifName) < 0)
-+ warn("We brought %s up but failed to take it down",conn->ifName);
- }
-
- static void
+++ /dev/null
-To: md@linux.it, mjt@corpit.ru
-Subject: pppd-auth-hook.patch
-Message-Id: <20040604231517.3E9AD11DC4@paltus.tls.msk.ru>
-Date: Sat, 5 Jun 2004 03:15:17 +0400 (MSD)
-From: mjt@corpit.ru (Michael Tokarev)
-
-The patch below fixes pppd segfault when using auth_hook that sets
-options for the user (use-after-free problem).
-
-/mjt
-
---- ppp/pppd/auth.c.orig Mon Jun 23 18:12:04 2003
-+++ ppp/pppd/auth.c Sat Jun 5 03:11:36 2004
-@@ -1251,14 +1251,14 @@
- if (pap_auth_hook) {
- ret = (*pap_auth_hook)(user, passwd, msg, &addrs, &opts);
- if (ret >= 0) {
-+ /* note: set_allowed_addrs() saves opts (but not addrs): don't free it! */
- if (ret)
- set_allowed_addrs(unit, addrs, opts);
-- BZERO(passwd, sizeof(passwd));
-+ else if (opts != 0)
-+ free_wordlist(opts);
- if (addrs != 0)
- free_wordlist(addrs);
-- if (opts != 0) {
-- free_wordlist(opts);
-- }
-+ BZERO(passwd, sizeof(passwd));
- return ret? UPAP_AUTHACK: UPAP_AUTHNAK;
- }
- }
-
+++ /dev/null
---- ppp/pppd/ipcp.c Wed May 31 17:20:41 2000
-+++ ppp/pppd/ipcp.c Wed May 31 17:27:19 2000
-@@ -145,7 +145,17 @@
- { "-defaultroute", o_bool, &ipcp_allowoptions[0].default_route,
- "disable defaultroute option", OPT_A2COPY,
- &ipcp_wantoptions[0].default_route },
-
-+#ifdef __linux__
-+ { "replacedefaultroute", o_bool,
-+ &ipcp_wantoptions[0].replace_default_route,
-+ "Replace default route", 1
-+ },
-+ { "noreplacedefaultroute", o_bool,
-+ &ipcp_allowoptions[0].replace_default_route,
-+ "Never replace default route", OPT_A2COPY,
-+ &ipcp_wantoptions[0].replace_default_route },
-+#endif
- { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp,
- "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp },
- { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
-@@ -195,7 +205,7 @@
- ip_active_pkt
- };
-
--static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t));
-+static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t, bool));
- static void ipcp_script __P((char *)); /* Run an up/down script */
- static void ipcp_script_done __P((void *));
-
-@@ -1344,7 +1354,12 @@
- if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE))
- return 0;
- if (wo->default_route)
-+#ifndef __linux__
- if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr))
-+#else
-+ if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr,
-+ wo->replace_default_route))
-+#endif
- default_route_set[u] = 1;
- if (wo->proxy_arp)
- if (sifproxyarp(u, wo->hisaddr))
-@@ -1420,7 +1435,8 @@
- */
- if (demand) {
- if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) {
-- ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr);
-+ ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr,
-+ wo->replace_default_route);
- if (go->ouraddr != wo->ouraddr) {
- warn("Local IP address changed to %I", go->ouraddr);
- script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr));
-@@ -1445,7 +1461,12 @@
-
- /* assign a default route through the interface if required */
- if (ipcp_wantoptions[f->unit].default_route)
-+#ifndef __linux__
- if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
-+#else
-+ if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr,
-+ wo->replace_default_route))
-+#endif
- default_route_set[f->unit] = 1;
-
- /* Make a proxy ARP entry if requested. */
-@@ -1492,7 +1513,12 @@
-
- /* assign a default route through the interface if required */
- if (ipcp_wantoptions[f->unit].default_route)
-+#ifndef __linux__
- if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
-+#else
-+ if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr,
-+ wo->replace_default_route))
-+#endif
- default_route_set[f->unit] = 1;
-
- /* Make a proxy ARP entry if requested. */
-@@ -1559,7 +1585,7 @@
- sifnpmode(f->unit, PPP_IP, NPMODE_DROP);
- sifdown(f->unit);
- ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr,
-- ipcp_hisoptions[f->unit].hisaddr);
-+ ipcp_hisoptions[f->unit].hisaddr, 0);
- }
-
- /* Execute the ip-down script */
-@@ -1575,16 +1601,25 @@
- * proxy arp entries, etc.
- */
- static void
--ipcp_clear_addrs(unit, ouraddr, hisaddr)
-+ipcp_clear_addrs(unit, ouraddr, hisaddr, replacedefaultroute)
- int unit;
- u_int32_t ouraddr; /* local address */
- u_int32_t hisaddr; /* remote address */
-+ bool replacedefaultroute;
- {
- if (proxy_arp_set[unit]) {
- cifproxyarp(unit, hisaddr);
- proxy_arp_set[unit] = 0;
- }
-- if (default_route_set[unit]) {
-+ /* If replacedefaultroute, sifdefaultroute will be called soon
-+ * with replacedefaultroute set and that will overwrite the current
-+ * default route. This is the case only when doing demand, otherwise
-+ * during demand, this cifdefaultroute would restore the old default
-+ * route which is not what we want in this case. In the non-demand
-+ * case, we'll delete the default route and restore the old if there
-+ * is one saved by an sifdefaultroute with replacedefaultroute.
-+ */
-+ if (!replacedefaultroute && default_route_set[unit]) {
- cifdefaultroute(unit, ouraddr, hisaddr);
- default_route_set[unit] = 0;
- }
---- ppp/pppd/ipcp.h Wed May 31 17:20:41 2000
-+++ ppp/pppd/ipcp.h Wed May 31 15:56:17 2000
-@@ -47,6 +47,7 @@
- bool old_addrs; /* Use old (IP-Addresses) option? */
- bool req_addr; /* Ask peer to send IP address? */
- bool default_route; /* Assign default route through interface? */
-+ bool replace_default_route; /* Replace default route through interface? */
- bool proxy_arp; /* Make proxy ARP entry for peer? */
- bool neg_vj; /* Van Jacobson Compression? */
- bool old_vj; /* use old (short) form of VJ option? */
---- ppp/pppd/pppd.8 Wed May 31 17:20:41 2000
-+++ ppp/pppd/pppd.8 Wed May 31 15:56:17 2000
-@@ -99,6 +99,13 @@
- This entry is removed when the PPP connection is broken. This option
- is privileged if the \fInodefaultroute\fR option has been specified.
- .TP
-+.B replacedefaultroute
-+This option is a flag to the defaultroute option. If defaultroute is
-+set and this flag is also set, pppd replaces an existing default route
-+with the new default route.
-+
-+
-+.TP
- .B disconnect \fIscript
- Run the executable or shell command specified by \fIscript\fR after
- pppd has terminated the link. This script could, for example, issue
-@@ -589,7 +596,12 @@
- .TP
- .B nodefaultroute
- Disable the \fIdefaultroute\fR option. The system administrator who
--wishes to prevent users from creating default routes with pppd
-+wishes to prevent users from adding a default route with pppd
-+can do so by placing this option in the /etc/ppp/options file.
-+.TP
-+.B noreplacedefaultroute
-+Disable the \fIreplacedefaultroute\fR option. The system administrator who
-+wishes to prevent users from replacing a default route with pppd
- can do so by placing this option in the /etc/ppp/options file.
- .TP
- .B nodeflate
---- ppp/pppd/pppd.h Wed May 31 17:20:41 2000
-+++ ppp/pppd/pppd.h Wed May 31 15:56:17 2000
-@@ -416,7 +416,11 @@
- int cif6addr __P((int, eui64_t, eui64_t));
- /* Remove an IPv6 address from i/f */
- #endif
-+#ifndef __linux__
- int sifdefaultroute __P((int, u_int32_t, u_int32_t));
-+#else
-+int sifdefaultroute __P((int, u_int32_t, u_int32_t, bool replace_default_rt));
-+#endif
- /* Create default route through i/f */
- int cifdefaultroute __P((int, u_int32_t, u_int32_t));
- /* Delete default route through i/f */
---- ppp/pppd/sys-linux.c Wed May 31 17:20:41 2000
-+++ ppp/pppd/sys-linux.c Wed May 31 17:37:23 2000
-@@ -143,6 +143,8 @@
-
- static int if_is_up; /* Interface has been marked up */
- static u_int32_t default_route_gateway; /* Gateway for default route added */
-+static struct rtentry old_def_rt; /* Old default route */
-+static int default_rt_repl_rest; /* replace and restore old default rt */
- static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */
- static char proxy_arp_dev[16]; /* Device for proxy arp entry */
- static u_int32_t our_old_addr; /* for detecting address changes */
-@@ -1209,6 +1211,9 @@
- p = NULL;
- }
-
-+ SET_SA_FAMILY (rt->rt_dst, AF_INET);
-+ SET_SA_FAMILY (rt->rt_gateway, AF_INET);
-+
- SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
- SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
- SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-@@ -1278,19 +1283,53 @@
- /********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
-+ *
-+ * If the global default_rt_repl_rest flag is set, then this function
-+ * already replaced the original system defaultroute with some other
-+ * route and it should just replace the current defaultroute with
-+ * another one, without saving the current route. Use: demand mode,
-+ * when pppd sets first a defaultroute it it's temporary ppp0 addresses
-+ * and then changes the temporary addresses to the addresses for the real
-+ * ppp connection when it has come up.
- */
-
--int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-+int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway, bool replace)
- {
-- struct rtentry rt;
--
-- if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
-- u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-+ struct rtentry rt, tmp_rt;
-+ struct rtentry *del_rt = NULL;
-
-- if (old_gateway != gateway)
-- error("not replacing existing default route to %s [%I]",
-- rt.rt_dev, old_gateway);
-- return 0;
-+
-+ if (default_rt_repl_rest) {
-+ /* We have already reclaced the original defaultroute, if we
-+ * are called again, we will delete the current default route
-+ * and set the new default route in this function.
-+ * - this is normally only the case the doing demand: */
-+ if (defaultroute_exists( &tmp_rt ))
-+ del_rt = &tmp_rt;
-+ } else if ( defaultroute_exists( &old_def_rt ) &&
-+ strcmp( old_def_rt.rt_dev, ifname ) != 0) {
-+ /* We did not yet replace an existing default route, let's
-+ * check if we should save and replace a default route:
-+ */
-+ u_int32_t old_gateway = SIN_ADDR(old_def_rt.rt_gateway);
-+
-+ if (old_gateway != gateway) {
-+ if (!replace) {
-+ error("not replacing default route to %s [%I]",
-+ old_def_rt.rt_dev, old_gateway);
-+ return 0;
-+ } else {
-+ // we need to copy rt_dev because we need it permanent too:
-+ char * tmp_dev = malloc(strlen(old_def_rt.rt_dev)+1);
-+ strcpy(tmp_dev, old_def_rt.rt_dev);
-+ old_def_rt.rt_dev = tmp_dev;
-+
-+ notice("replacing old default route to %s [%I]",
-+ old_def_rt.rt_dev, old_gateway);
-+ default_rt_repl_rest = 1;
-+ del_rt = &old_def_rt;
-+ }
-+ }
- }
-
- memset (&rt, '\0', sizeof (rt));
-@@ -1310,6 +1349,12 @@
- error("default route ioctl(SIOCADDRT): %m(%d)", errno);
- return 0;
- }
-+ if (default_rt_repl_rest && del_rt)
-+ if (ioctl(sock_fd, SIOCDELRT, del_rt) < 0) {
-+ if ( ! ok_error ( errno ))
-+ error("del old default route ioctl(SIOCDELRT): %m(%d)", errno);
-+ return 0;
-+ }
-
- default_route_gateway = gateway;
- return 1;
-@@ -1344,6 +1389,16 @@
- error("default route ioctl(SIOCDELRT): %m (%d)", errno);
- return 0;
- }
-+ }
-+ if (default_rt_repl_rest) {
-+ notice("restoring old default route to %s [%I]",
-+ old_def_rt.rt_dev, SIN_ADDR(old_def_rt.rt_gateway));
-+ if (ioctl(sock_fd, SIOCADDRT, &old_def_rt) < 0) {
-+ if ( ! ok_error ( errno ))
-+ error("restore default route ioctl(SIOCADDRT): %m(%d)", errno);
-+ return 0;
-+ }
-+ default_rt_repl_rest = 0;
- }
-
- return 1;
+++ /dev/null
-Ensure that the fd returned by the connect method is closed before
-running external programs.
-
-http://article.gmane.org/gmane.linux.ppp/1371
-
-diff -ruNp ppp.orig/pppd/main.c ppp/pppd/main.c
---- ppp.orig/pppd/main.c 2004-07-12 12:55:30.000000000 +0200
-+++ ppp/pppd/main.c 2004-07-12 12:55:25.000000000 +0200
-@@ -1662,6 +1662,8 @@ run_program(prog, args, must_exist, done
- closelog();
- if (the_channel->close)
- (*the_channel->close)();
-+ else
-+ close(devfd);
-
- /* Don't pass handles to the PPP device, even by accident. */
- dup2(fd_devnull, 0);
+++ /dev/null
-sys_init() will open a socket and keep it open for the whole like of the
-process. If pppd is started without all standard fds open then the socket
-will get one of their numbers, which will be clobbered later by the
-/dev/null fd duplicated by main().
-
-See Debian bug #235192.
-
-diff -ruN ppp.orig/pppd/main.c ppp/pppd/main.c
---- ppp.orig/pppd/main.c 2004-02-29 18:50:12.000000000 +0100
-+++ ppp/pppd/main.c 2004-02-29 18:48:56.000000000 +0100
-@@ -385,11 +385,6 @@
- if (dryrun)
- die(0);
-
-- /*
-- * Initialize system-dependent stuff.
-- */
-- sys_init();
--
- /* Make sure fds 0, 1, 2 are open to somewhere. */
- fd_devnull = open(_PATH_DEVNULL, O_RDWR);
- if (fd_devnull < 0)
-@@ -401,6 +396,11 @@
- fd_devnull = i;
- }
-
-+ /*
-+ * Initialize system-dependent stuff.
-+ */
-+ sys_init();
-+
- #ifdef USE_TDB
- pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644);
- if (pppdb != NULL) {
+++ /dev/null
-diff -ruN ppp.orig/pppd/auth.c ppp/pppd/auth.c
---- ppp.orig/pppd/auth.c 2003-06-12 02:01:21.000000000 +0200
-+++ ppp/pppd/auth.c 2003-12-02 14:48:40.000000000 +0100
-@@ -1292,8 +1292,10 @@
- }
- if (secret[0] != 0 && !login_secret) {
- /* password given in pap-secrets - must match */
-+#ifndef NO_CRYPT_HACK
- if ((cryptpap || strcmp(passwd, secret) != 0)
- && strcmp(crypt(passwd, secret), secret) != 0)
-+#endif
- ret = UPAP_AUTHNAK;
- }
- }
-@@ -1495,8 +1497,10 @@
- /*
- * If no passwd, don't let them login.
- */
-+#ifndef NO_CRYPT_HACK
- if (pw->pw_passwd == NULL || strlen(pw->pw_passwd) < 2
- || strcmp(crypt(passwd, pw->pw_passwd), pw->pw_passwd) != 0)
-+#endif
- return (UPAP_AUTHNAK);
-
- #endif /* #ifdef USE_PAM */
-diff -ruN ppp.orig/pppd/Makefile.linux ppp/pppd/Makefile.linux
---- ppp.orig/pppd/Makefile.linux 2003-11-27 23:00:22.000000000 +0100
-+++ ppp/pppd/Makefile.linux 2003-12-02 14:47:53.000000000 +0100
-@@ -116,12 +116,16 @@
- #LIBS += -lshadow $(LIBS)
- endif
-
-+ifdef NO_CRYPT_HACK
-+CFLAGS += -DNO_CRYPT_HACK
-+else
- ifneq ($(wildcard /usr/include/crypt.h),)
- CFLAGS += -DHAVE_CRYPT_H=1
- endif
- ifneq ($(wildcard /usr/lib/libcrypt.*),)
- LIBS += -lcrypt
- endif
-+endif
-
- ifdef NEEDDES
- ifndef USE_CRYPT
+++ /dev/null
---- ppp/pppd/demand.c
-+++ ppp/pppd/demand.c 2000/06/28 14:54:04
-@@ -25,6 +25,8 @@
- #include <errno.h>
- #include <fcntl.h>
- #include <netdb.h>
-+#include <unistd.h>
-+#include <syslog.h>
- #include <sys/param.h>
- #include <sys/types.h>
- #include <sys/wait.h>
-@@ -32,6 +34,8 @@
- #include <sys/resource.h>
- #include <sys/stat.h>
- #include <sys/socket.h>
-+#include <netinet/in.h>
-+#include <arpa/inet.h>
- #ifdef PPP_FILTER
- #include <net/if.h>
- #include <net/bpf.h>
-@@ -210,6 +214,14 @@
- int c, rv;
-
- rv = 0;
-+
-+/* check for synchronous connection... */
-+
-+ if ( (p[0] == 0xFF) && (p[1] == 0x03) ) {
-+ rv = loop_frame(p,n);
-+ return rv;
-+ }
-+
- for (; n > 0; --n) {
- c = *p++;
- if (c == PPP_FLAG) {
-@@ -288,17 +300,102 @@
- * loopback, now that the real serial link is up.
- */
- void
--demand_rexmit(proto)
-+demand_rexmit(proto, newip)
- int proto;
-+ u_int32_t newip;
- {
- struct packet *pkt, *prev, *nextpkt;
-+ unsigned short checksum;
-+ unsigned short pkt_checksum = 0;
-+ unsigned iphdr;
-+ struct timeval tv;
-+ char cv = 0;
-+ char ipstr[16];
-
- prev = NULL;
- pkt = pend_q;
- pend_q = NULL;
-+ tv.tv_sec = 1;
-+ tv.tv_usec = 0;
-+ select(0,NULL,NULL,NULL,&tv); /* Sleep for 1 Seconds */
- for (; pkt != NULL; pkt = nextpkt) {
- nextpkt = pkt->next;
- if (PPP_PROTOCOL(pkt->data) == proto) {
-+ if ( (proto == PPP_IP) && newip ) {
-+ /* Get old checksum */
-+
-+ iphdr = (pkt->data[4] & 15) << 2;
-+ checksum = *((unsigned short *) (pkt->data+14));
-+ if (checksum == 0xFFFF) {
-+ checksum = 0;
-+ }
-+
-+
-+ if (pkt->data[13] == 17) {
-+ pkt_checksum = *((unsigned short *) (pkt->data+10+iphdr));
-+ if (pkt_checksum) {
-+ cv = 1;
-+ if (pkt_checksum == 0xFFFF) {
-+ pkt_checksum = 0;
-+ }
-+ }
-+ else {
-+ cv = 0;
-+ }
-+ }
-+
-+ if (pkt->data[13] == 6) {
-+ pkt_checksum = *((unsigned short *) (pkt->data+20+iphdr));
-+ cv = 1;
-+ if (pkt_checksum == 0xFFFF) {
-+ pkt_checksum = 0;
-+ }
-+ }
-+
-+ /* Delete old Source-IP-Address */
-+ checksum -= *((unsigned short *) (pkt->data+16)) ^ 0xFFFF;
-+ checksum -= *((unsigned short *) (pkt->data+18)) ^ 0xFFFF;
-+
-+ pkt_checksum -= *((unsigned short *) (pkt->data+16)) ^ 0xFFFF;
-+ pkt_checksum -= *((unsigned short *) (pkt->data+18)) ^ 0xFFFF;
-+
-+ /* Change Source-IP-Address */
-+ * ((u_int32_t *) (pkt->data + 16)) = newip;
-+
-+ /* Add new Source-IP-Address */
-+ checksum += *((unsigned short *) (pkt->data+16)) ^ 0xFFFF;
-+ checksum += *((unsigned short *) (pkt->data+18)) ^ 0xFFFF;
-+
-+ pkt_checksum += *((unsigned short *) (pkt->data+16)) ^ 0xFFFF;
-+ pkt_checksum += *((unsigned short *) (pkt->data+18)) ^ 0xFFFF;
-+
-+ /* Write new checksum */
-+ if (!checksum) {
-+ checksum = 0xFFFF;
-+ }
-+ *((unsigned short *) (pkt->data+14)) = checksum;
-+ if (pkt->data[13] == 6) {
-+ *((unsigned short *) (pkt->data+20+iphdr)) = pkt_checksum;
-+ }
-+ if (cv && (pkt->data[13] == 17) ) {
-+ *((unsigned short *) (pkt->data+10+iphdr)) = pkt_checksum;
-+ }
-+
-+ /* Log Packet */
-+ strcpy(ipstr,inet_ntoa(*( (struct in_addr *) (pkt->data+16))));
-+ if (pkt->data[13] == 1) {
-+ syslog(LOG_INFO,"Open ICMP %s -> %s\n",
-+ ipstr,
-+ inet_ntoa(*( (struct in_addr *) (pkt->data+20))));
-+ } else {
-+ syslog(LOG_INFO,"Open %s %s:%d -> %s:%d\n",
-+ pkt->data[13] == 6 ? "TCP" : "UDP",
-+ ipstr,
-+ ntohs(*( (short *) (pkt->data+iphdr+4))),
-+ inet_ntoa(*( (struct in_addr *) (pkt->data+20))),
-+ ntohs(*( (short *) (pkt->data+iphdr+6))));
-+ }
-+ }
- output(0, pkt->data, pkt->length);
- free(pkt);
- } else {
---- ppp/pppd/ipcp.c
-+++ ppp/pppd/ipcp.c 2000/06/28 12:32:05
-@@ -1454,7 +1454,7 @@
- proxy_arp_set[f->unit] = 1;
-
- }
-- demand_rexmit(PPP_IP);
-+ demand_rexmit(PPP_IP,go->ouraddr);
- sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
- } else {
---- ppp/pppd/ipv6cp.c
-+++ ppp/pppd/ipv6cp.c 2000/06/28 12:32:06
-@@ -1153,7 +1153,7 @@
- }
-
- }
-- demand_rexmit(PPP_IPV6);
-+ demand_rexmit(PPP_IPV6,0);
- sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
- } else {
---- ppp/pppd/pppd.h
-+++ ppp/pppd/pppd.h 2000/06/28 12:32:06
-@@ -359,7 +359,7 @@
- void demand_block __P((void)); /* set all NPs to queue up packets */
- void demand_unblock __P((void)); /* set all NPs to pass packets */
- void demand_discard __P((void)); /* set all NPs to discard packets */
--void demand_rexmit __P((int)); /* retransmit saved frames for an NP */
-+void demand_rexmit __P((int, u_int32_t)); /* retransmit saved frames for an NP*/
- int loop_chars __P((unsigned char *, int)); /* process chars from loopback */
- int loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
+++ /dev/null
-diff -ruN ppp.orig/pppd/chap-new.c ppp/pppd/chap-new.c
---- ppp.orig/pppd/chap-new.c 2003-11-27 23:25:17.000000000 +0100
-+++ ppp/pppd/chap-new.c 2003-12-02 12:26:21.000000000 +0100
-@@ -57,6 +57,7 @@
- int chap_timeout_time = 3;
- int chap_max_transmits = 10;
- int chap_rechallenge_time = 0;
-+int chapms_strip_domain = 0;
-
- /*
- * Command-line options.
-@@ -68,6 +69,8 @@
- "Set max #xmits for challenge", OPT_PRIO },
- { "chap-interval", o_int, &chap_rechallenge_time,
- "Set interval for rechallenge", OPT_PRIO },
-+ { "chapms-strip-domain", o_bool, &chapms_strip_domain,
-+ "Strip the domain prefix before the Username", 1 },
- { NULL }
- };
-
-@@ -338,6 +341,14 @@
- /* Null terminate and clean remote name. */
- slprintf(rname, sizeof(rname), "%.*v", len, name);
- name = rname;
-+
-+ /* strip the MS domain name */
-+ if (chapms_strip_domain && strrchr(rname, '\\')) {
-+ char tmp[MAXNAMELEN+1];
-+
-+ strcpy(tmp, strrchr(rname, '\\') + 1);
-+ strcpy(rname, tmp);
-+ }
- }
-
- if (chap_verify_hook)
+++ /dev/null
-diff -ruN ppp-2.4.1.uus.orig/pppdump/ppp-comp.h ppp-2.4.1.uus/pppdump/ppp-comp.h
---- ppp-2.4.1.uus.orig/pppdump/ppp-comp.h 1999-03-23 04:21:01.000000000 +0100
-+++ ppp-2.4.1.uus/pppdump/ppp-comp.h 2003-08-09 23:54:49.000000000 +0200
-@@ -37,6 +37,8 @@
- #ifndef DO_BSD_COMPRESS
- #define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */
- #endif
-+#undef DO_DEFLATE
-+#define DO_DEFLATE 0
- #ifndef DO_DEFLATE
- #define DO_DEFLATE 1 /* by default, include Deflate */
- #endif
+++ /dev/null
-diff -ruN ppp.orig/pppd/options.c ppp/pppd/options.c
---- ppp.orig/pppd/options.c 2004-02-27 19:45:18.000000000 +0100
-+++ ppp/pppd/options.c 2004-02-27 19:44:48.000000000 +0100
-@@ -1448,6 +1448,7 @@
- if ((fname = (char *) malloc(l)) == NULL)
- novm("call file name");
- slprintf(fname, l, "%s%s", _PATH_PEERFILES, arg);
-+ script_setenv("CALL_FILE", arg, 0);
-
- ok = options_from_file(fname, 1, 1, 1);
-
-diff -ruN ppp.orig/pppd/pppd.8 ppp/pppd/pppd.8
---- ppp.orig/pppd/pppd.8 2004-02-27 19:45:18.000000000 +0100
-+++ ppp/pppd/pppd.8 2004-02-27 19:45:13.000000000 +0100
-@@ -1569,6 +1569,9 @@
- .B LINKNAME
- The logical name of the link, set with the \fIlinkname\fR option.
- .TP
-+.B CALL_FILE
-+The value of the \fIcall\fR option.
-+.TP
- .B DNS1
- If the peer supplies DNS server addresses, this variable is set to the
- first DNS server address supplied.
+++ /dev/null
-diff -ruN ppp.orig/pppd/pppd.h ppp/pppd/pppd.h
---- ppp.orig/pppd/pppd.h 2003-11-28 00:30:27.000000000 +0100
-+++ ppp/pppd/pppd.h 2003-11-28 00:30:20.000000000 +0100
-@@ -812,7 +812,7 @@
- || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
- #define LOG_PPP LOG_LOCAL2
- #else
--#define LOG_PPP LOG_DAEMON
-+#define LOG_PPP LOG_LOCAL2
- #endif
- #endif /* LOG_PPP */
-
+++ /dev/null
-diff -ruN ppp-2.4.2-old/chat/Makefile.linux ppp-2.4.2-new/chat/Makefile.linux
---- ppp-2.4.2-old/chat/Makefile.linux 2004-01-13 04:57:55.000000000 +0100
-+++ ppp-2.4.2-new/chat/Makefile.linux 2004-08-23 12:48:50.000000000 +0200
-@@ -6,8 +6,9 @@
- CDEF4= -DFNDELAY=O_NDELAY # Old name value
- CDEFS= $(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
--COPTS= -O2 -g -pipe $(CDEFS)
--CFLAGS= $(COPTS) $(CDEFS)
-+COPTS = -O2
-+COMPILE_FLAGS = $(CDEFS)
-+CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-
- INSTALL= install
-
-diff -ruN ppp-2.4.2-old/pppd/Makefile.linux ppp-2.4.2-new/pppd/Makefile.linux
---- ppp-2.4.2-old/pppd/Makefile.linux 2003-11-27 22:55:19.000000000 +0100
-+++ ppp-2.4.2-new/pppd/Makefile.linux 2004-08-23 12:48:50.000000000 +0200
-@@ -47,19 +47,19 @@
- # Uncomment the next line to include support for PPP packet filtering.
- # This requires that the libpcap library and headers be installed
- # and that the kernel driver support PPP packet filtering.
--FILTER=y
-+#FILTER=y
-
- # Uncomment the next line to enable multilink PPP (enabled by default)
- # Linux distributions: Please leave multilink ENABLED in your builds
- # of pppd!
--HAVE_MULTILINK=y
-+#HAVE_MULTILINK=y
-
- # Uncomment the next line to enable the TDB database (enabled by default.)
- # If you enable multilink, then TDB is automatically enabled also.
- # Linux distributions: Please leave TDB ENABLED in your builds.
--USE_TDB=y
-+#USE_TDB=y
-
--HAS_SHADOW=y
-+#HAS_SHADOW=y
- #USE_PAM=y
- #HAVE_INET6=y
-
-@@ -76,7 +76,7 @@
-
- INCLUDE_DIRS= -I../include
-
--COMPILE_FLAGS= -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MMAP
-+COMPILE_FLAGS= -DHAVE_PATHS_H
-
- CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-@@ -192,7 +192,7 @@
- CFLAGS += -DMAXOCTETS
- endif
-
--INSTALL= install -o root
-+INSTALL= install
-
- all: $(TARGETS)
-
-diff -ruN ppp-2.4.2-old/pppd/plugins/Makefile.linux ppp-2.4.2-new/pppd/plugins/Makefile.linux
---- ppp-2.4.2-old/pppd/plugins/Makefile.linux 2004-01-13 04:56:24.000000000 +0100
-+++ ppp-2.4.2-new/pppd/plugins/Makefile.linux 2004-08-23 12:48:50.000000000 +0200
-@@ -1,12 +1,16 @@
--CC = gcc
--COPTS = -O2 -g
--CFLAGS = $(COPTS) -I.. -I../../include -fPIC
--LDFLAGS = -shared
--INSTALL = install -o root
-+#CC = gcc
-+COPTS = -O2
-+COMPILE_FLAGS = -I.. -I../../include -fPIC
-+LIBS =
-+
-+INSTALL = install
-+
-+CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-+LDFLAGS = -shared
-
- SUBDIRS := rp-pppoe
- # Uncomment the next line to include the radius authentication plugin
--# SUBDIRS += radius
-+SUBDIRS += radius
- PLUGINS := minconn.so passprompt.so passwordfd.so
-
- # include dependencies if present
-diff -ruN ppp-2.4.2-old/pppd/plugins/radius/Makefile.linux ppp-2.4.2-new/pppd/plugins/radius/Makefile.linux
---- ppp-2.4.2-old/pppd/plugins/radius/Makefile.linux 2002-11-09 12:24:42.000000000 +0100
-+++ ppp-2.4.2-new/pppd/plugins/radius/Makefile.linux 2004-08-23 12:57:38.000000000 +0200
-@@ -5,7 +5,12 @@
-
- MANDIR=/usr/man
- PLUGIN=radius.so radattr.so radrealms.so
--CFLAGS=-I../.. -I../../../include -Iradiusclient/include -O2
-+COPTS = -O2
-+COMPILE_FLAGS = -I../.. -I../../../include -Iradiusclient/include -fPIC
-+LIBS=
-+
-+CFLAGS=$(COPTS) $(COMPILE_FLAGS)
-+LDFLAGS=-lradiusclient
-
- # Uncomment the next line to include support for Microsoft's
- # MS-CHAP authentication protocol.
-@@ -37,29 +42,34 @@
- $(INSTALL) -c -m 444 pppd-radattr.8 $(MANDIR)/man8
-
- radius.so: radiusclient/lib/.libs/libradiusclient.a radius.o
-- gcc -o radius.so -shared radius.o radiusclient/lib/.libs/libradiusclient.a
-+ $(CC) -o radius.so -shared radius.o radiusclient/lib/.libs/libradiusclient.a
-
- radattr.so: radattr.o
-- gcc -o radattr.so -shared radattr.o
-+ $(CC) -o radattr.so -shared radattr.o
-
- radrealms.so: radrealms.o
-- gcc -o radrealms.so -shared radrealms.o
-+ $(CC) -o radrealms.so -shared radrealms.o
-
- radius.o: radius.c
-- gcc $(CFLAGS) -c -o radius.o -fPIC radius.c
-+ $(CC) -c $(CFLAGS) radius.c -o radius.o
-
- radattr.o: radattr.c
-- gcc $(CFLAGS) -c -o radattr.o -fPIC radattr.c
-+ $(CC) -c $(CFLAGS) radattr.c -o radattr.o
-
- radrealms.o: radrealms.c
-- gcc $(CFLAGS) -c -o radrealms.o -fPIC radrealms.c
-+ $(CC) -c $(CFLAGS) radrealms.c -o radrealms.o
-
- radiusclient/lib/.libs/libradiusclient.a:
- test -r radiusclient/Makefile || \
- (cd radiusclient; \
-+ rm -f config.cache ; \
-+ aclocal ; \
-+ autoconf ; \
-+ ac_cv_func_setvbuf_reversed=no \
-+ ac_cv_func_uname=no \
- ./configure --prefix=/usr \
- --sysconfdir=/etc \
-- --enable-shared \
-+ --disable-shared \
- --enable-static)
- $(MAKE) -C radiusclient
-
-diff -ruN ppp-2.4.2-old/pppd/plugins/rp-pppoe/Makefile.linux ppp-2.4.2-new/pppd/plugins/rp-pppoe/Makefile.linux
---- ppp-2.4.2-old/pppd/plugins/rp-pppoe/Makefile.linux 2004-01-13 04:57:55.000000000 +0100
-+++ ppp-2.4.2-new/pppd/plugins/rp-pppoe/Makefile.linux 2004-08-23 12:48:50.000000000 +0200
-@@ -16,12 +16,16 @@
- # Version is set ONLY IN THE MAKEFILE! Don't delete this!
- VERSION=3.3
-
--COPTS=-O2 -g
--CFLAGS=$(COPTS) -I../../../include/linux
-+#CC = gcc
-+COPTS = -O2
-+COMPILE_FLAGS = -I../../../include/linux -fPIC
-+
-+CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-+
- all: rp-pppoe.so
-
- rp-pppoe.so: libplugin.a plugin.o
-- gcc -o rp-pppoe.so -shared plugin.o libplugin.a
-+ $(CC) -o rp-pppoe.so -shared plugin.o libplugin.a
-
- install: all
- $(INSTALL) -d -m 755 $(LIBDIR)
-@@ -31,20 +35,20 @@
- rm -f *.o *.so
-
- plugin.o: plugin.c
-- gcc '-DRP_VERSION="$(VERSION)"' $(CFLAGS) -I../../.. -c -o plugin.o -fPIC plugin.c
-+ $(CC) -c $(CFLAGS) plugin.c '-DRP_VERSION="$(VERSION)"' -I../../.. -o plugin.o
-
- libplugin.a: discovery.o if.o common.o debug.o
-- ar -rc $@ $^
-+ $(AR) -rc $@ $^
-
- discovery.o: discovery.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o -fPIC discovery.c
-+ $(CC) -c $(CFLAGS) discovery.c '-DVERSION="$(VERSION)"' -o discovery.o
-
- if.o: if.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o if.o -fPIC if.c
-+ $(CC) -c $(CFLAGS) if.c '-DVERSION="$(VERSION)"' -o if.o
-
- debug.o: debug.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o debug.o -fPIC debug.c
-+ $(CC) -c $(CFLAGS) debug.c '-DVERSION="$(VERSION)"' -o debug.o
-
- common.o: common.c
-- gcc $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o common.o -fPIC common.c
-+ $(CC) -c $(CFLAGS) common.c '-DVERSION="$(VERSION)"' -o common.o
-
-diff -ruN ppp-2.4.2-old/pppdump/Makefile.linux ppp-2.4.2-new/pppdump/Makefile.linux
---- ppp-2.4.2-old/pppdump/Makefile.linux 1999-07-26 13:09:29.000000000 +0200
-+++ ppp-2.4.2-new/pppdump/Makefile.linux 2004-08-23 12:48:50.000000000 +0200
-@@ -1,4 +1,8 @@
--CFLAGS= -O -I../include/net
-+#CC = gcc
-+COPTS = -O
-+COMPILE_FLAGS = -I../include/net
-+CFLAGS= $(COPTS) $(COMPILE_FLAGS)
-+
- OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
- INSTALL= install
-diff -ruN ppp-2.4.2-old/pppstats/Makefile.linux ppp-2.4.2-new/pppstats/Makefile.linux
---- ppp-2.4.2-old/pppstats/Makefile.linux 2002-11-09 12:24:43.000000000 +0100
-+++ ppp-2.4.2-new/pppstats/Makefile.linux 2004-08-23 12:48:50.000000000 +0200
-@@ -7,11 +7,11 @@
- PPPSTATOBJS = pppstats.o
-
- #CC = gcc
--COPTS = -O
-+COPTS = -O2
- COMPILE_FLAGS = -I../include
- LIBS =
-
--INSTALL= install -o root -g daemon
-+INSTALL= install
-
- CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-
+++ /dev/null
-diff -ruN ppp-2.4.2.orig/include/linux/ppp-comp.h ppp-2.4.2-stdopt/include/linux/ppp-comp.h
---- ppp-2.4.2.orig/include/linux/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100
-+++ ppp-2.4.2-stdopt/include/linux/ppp-comp.h 2004-01-21 06:51:09.000000000 +0100
-@@ -36,7 +36,7 @@
- */
-
- /*
-- * ==FILEVERSION 20020319==
-+ * ==FILEVERSION 20020715==
- *
- * NOTE TO MAINTAINERS:
- * If you modify this file at all, please set the above date.
-@@ -86,7 +86,7 @@
-
- /* Compress a packet */
- int (*compress) (void *state, unsigned char *rptr,
-- unsigned char *obuf, int isize, int osize);
-+ unsigned char *obuf, int isize, int osize);
-
- /* Return compression statistics */
- void (*comp_stat) (void *state, struct compstat *stats);
-@@ -107,7 +107,7 @@
-
- /* Decompress a packet. */
- int (*decompress) (void *state, unsigned char *ibuf, int isize,
-- unsigned char *obuf, int osize);
-+ unsigned char *obuf, int osize);
-
- /* Update state for an incompressible packet received */
- void (*incomp) (void *state, unsigned char *ibuf, int icnt);
-@@ -288,6 +288,33 @@
- opts |= MPPE_OPT_UNKNOWN; \
- } while (/* CONSTCOND */ 0)
-
-+/* MPPE/MPPC definitions by J.D.*/
-+#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */
-+#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */
-+#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */
-+#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */
-+#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */
-+
-+/*
-+ * Definitions for Stac LZS.
-+ */
-+
-+#define CI_LZS 17 /* config option for Stac LZS */
-+#define CILEN_LZS 5 /* length of config option */
-+
-+#define LZS_OVHD 4 /* max. LZS overhead */
-+#define LZS_HIST_LEN 2048 /* LZS history size */
-+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */
-+
-+#define LZS_MODE_NONE 0
-+#define LZS_MODE_LCB 1
-+#define LZS_MODE_CRC 2
-+#define LZS_MODE_SEQ 3
-+#define LZS_MODE_EXT 4
-+
-+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */
-+#define LZS_EXT_BIT_COMP 0x20 /* bit C */
-+
- /*
- * Definitions for other, as yet unsupported, compression methods.
- */
-diff -ruN ppp-2.4.2.orig/include/net/ppp-comp.h ppp-2.4.2-stdopt/include/net/ppp-comp.h
---- ppp-2.4.2.orig/include/net/ppp-comp.h 2002-12-06 10:49:15.000000000 +0100
-+++ ppp-2.4.2-stdopt/include/net/ppp-comp.h 2004-01-21 06:51:09.000000000 +0100
-@@ -255,6 +255,33 @@
- opts |= MPPE_OPT_UNKNOWN; \
- } while (/* CONSTCOND */ 0)
-
-+/* MPPE/MPPC definitions by J.D.*/
-+#define MPPE_STATELESS MPPE_H_BIT /* configuration bit H */
-+#define MPPE_40BIT MPPE_L_BIT /* configuration bit L */
-+#define MPPE_56BIT MPPE_M_BIT /* configuration bit M */
-+#define MPPE_128BIT MPPE_S_BIT /* configuration bit S */
-+#define MPPE_MPPC MPPE_C_BIT /* configuration bit C */
-+
-+/*
-+ * Definitions for Stac LZS.
-+ */
-+
-+#define CI_LZS 17 /* config option for Stac LZS */
-+#define CILEN_LZS 5 /* length of config option */
-+
-+#define LZS_OVHD 4 /* max. LZS overhead */
-+#define LZS_HIST_LEN 2048 /* LZS history size */
-+#define LZS_MAX_CCOUNT 0x0FFF /* max. coherency counter value */
-+
-+#define LZS_MODE_NONE 0
-+#define LZS_MODE_LCB 1
-+#define LZS_MODE_CRC 2
-+#define LZS_MODE_SEQ 3
-+#define LZS_MODE_EXT 4
-+
-+#define LZS_EXT_BIT_FLUSHED 0x80 /* bit A */
-+#define LZS_EXT_BIT_COMP 0x20 /* bit C */
-+
- /*
- * Definitions for other, as yet unsupported, compression methods.
- */
-diff -ruN ppp-2.4.2.orig/pppd/ccp.c ppp-2.4.2-stdopt/pppd/ccp.c
---- ppp-2.4.2.orig/pppd/ccp.c 2003-05-01 14:30:28.000000000 +0200
-+++ ppp-2.4.2-stdopt/pppd/ccp.c 2004-05-02 14:10:04.000000000 +0200
-@@ -67,13 +67,6 @@
- static char bsd_value[8];
- static char deflate_value[8];
-
--/*
-- * Option variables.
-- */
--#ifdef MPPE
--bool refuse_mppe_stateful = 1; /* Allow stateful mode? */
--#endif
--
- static option_t ccp_option_list[] = {
- { "noccp", o_bool, &ccp_protent.enabled_flag,
- "Disable CCP negotiation" },
-@@ -113,54 +106,87 @@
- "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].predictor_1 },
-
-+ { "lzs", o_bool, &ccp_wantoptions[0].lzs,
-+ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_PRIO },
-+ { "+lzs", o_bool, &ccp_wantoptions[0].lzs,
-+ "request Stac LZS", 1, &ccp_allowoptions[0].lzs, OPT_ALIAS | OPT_PRIO },
-+ { "nolzs", o_bool, &ccp_wantoptions[0].lzs,
-+ "don't allow Stac LZS", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].lzs },
-+ { "-lzs", o_bool, &ccp_wantoptions[0].lzs,
-+ "don't allow Stac LZS", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].lzs },
-+
- #ifdef MPPE
-- /* MPPE options are symmetrical ... we only set wantoptions here */
-+ { "mppc", o_bool, &ccp_wantoptions[0].mppc,
-+ "request MPPC compression", 1, &ccp_allowoptions[0].mppc, OPT_PRIO },
-+ { "+mppc", o_bool, &ccp_wantoptions[0].mppc,
-+ "request MPPC compression", 1, &ccp_allowoptions[0].mppc,
-+ OPT_ALIAS | OPT_PRIO },
-+ { "nomppc", o_bool, &ccp_wantoptions[0].mppc,
-+ "don't allow MPPC compression", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppc },
-+ { "-mppc", o_bool, &ccp_wantoptions[0].mppc,
-+ "don't allow MPPC compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppc },
-+
- { "require-mppe", o_bool, &ccp_wantoptions[0].mppe,
-- "require MPPE encryption",
-- OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
-+ "require MPPE encryption", 1, &ccp_allowoptions[0].mppe, OPT_PRIO },
- { "+mppe", o_bool, &ccp_wantoptions[0].mppe,
-- "require MPPE encryption",
-- OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 },
-+ "require MPPE encryption", 1, &ccp_allowoptions[0].mppe,
-+ OPT_ALIAS | OPT_PRIO },
- { "nomppe", o_bool, &ccp_wantoptions[0].mppe,
-- "don't allow MPPE encryption", OPT_PRIO },
-+ "don't allow MPPE encryption", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe },
- { "-mppe", o_bool, &ccp_wantoptions[0].mppe,
-- "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO },
-+ "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe },
-
-- /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */
-- { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
-- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
-- &ccp_wantoptions[0].mppe },
-- { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe,
-- "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40,
-- &ccp_wantoptions[0].mppe },
-- { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe,
-- "don't allow MPPE 40-bit encryption",
-- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe },
-- { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe,
-- "don't allow MPPE 40-bit encryption",
-- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40,
-- &ccp_wantoptions[0].mppe },
--
-- { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
-- "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
-- &ccp_wantoptions[0].mppe },
-- { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe,
-- "require MPPE 128-bit encryption",
-- OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128,
-- &ccp_wantoptions[0].mppe },
-- { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe,
-- "don't allow MPPE 128-bit encryption",
-- OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe },
-- { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe,
-- "don't allow MPPE 128-bit encryption",
-- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128,
-- &ccp_wantoptions[0].mppe },
--
-- /* strange one; we always request stateless, but will we allow stateful? */
-- { "mppe-stateful", o_bool, &refuse_mppe_stateful,
-- "allow MPPE stateful mode", OPT_PRIO },
-- { "nomppe-stateful", o_bool, &refuse_mppe_stateful,
-- "disallow MPPE stateful mode", OPT_PRIO | 1 },
-+ { "require-mppe-40", o_bool, &ccp_wantoptions[0].mppe_40,
-+ "require MPPE 40-bit encryption", 1, &ccp_allowoptions[0].mppe_40,
-+ OPT_PRIO },
-+ { "+mppe-40", o_bool, &ccp_wantoptions[0].mppe_40,
-+ "require MPPE 40-bit encryption", 1, &ccp_allowoptions[0].mppe_40,
-+ OPT_ALIAS | OPT_PRIO },
-+ { "nomppe-40", o_bool, &ccp_wantoptions[0].mppe_40,
-+ "don't allow MPPE 40-bit encryption", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_40 },
-+ { "-mppe-40", o_bool, &ccp_wantoptions[0].mppe_40,
-+ "don't allow MPPE 40-bit encryption", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_40 },
-+
-+ { "require-mppe-56", o_bool, &ccp_wantoptions[0].mppe_56,
-+ "require MPPE 56-bit encryption", 1, &ccp_allowoptions[0].mppe_56,
-+ OPT_PRIO },
-+ { "+mppe-56", o_bool, &ccp_wantoptions[0].mppe_56,
-+ "require MPPE 56-bit encryption", 1, &ccp_allowoptions[0].mppe_56,
-+ OPT_ALIAS | OPT_PRIO },
-+ { "nomppe-56", o_bool, &ccp_wantoptions[0].mppe_56,
-+ "don't allow MPPE 56-bit encryption", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_56 },
-+ { "-mppe-56", o_bool, &ccp_wantoptions[0].mppe_56,
-+ "don't allow MPPE 56-bit encryption", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_56 },
-+
-+ { "require-mppe-128", o_bool, &ccp_wantoptions[0].mppe_128,
-+ "require MPPE 128-bit encryption", 1, &ccp_allowoptions[0].mppe_128,
-+ OPT_PRIO },
-+ { "+mppe-128", o_bool, &ccp_wantoptions[0].mppe_128,
-+ "require MPPE 128-bit encryption", 1, &ccp_allowoptions[0].mppe_128,
-+ OPT_ALIAS | OPT_PRIO },
-+ { "nomppe-128", o_bool, &ccp_wantoptions[0].mppe_40,
-+ "don't allow MPPE 128-bit encryption", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_128 },
-+ { "-mppe-128", o_bool, &ccp_wantoptions[0].mppe_128,
-+ "don't allow MPPE 128-bit encryption", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_128 },
-+
-+ { "nomppe-stateful", o_bool, &ccp_wantoptions[0].mppe_stateless,
-+ "disallow MPPE stateful mode", 1, &ccp_allowoptions[0].mppe_stateless,
-+ OPT_PRIO },
-+ { "mppe-stateful", o_bool, &ccp_wantoptions[0].mppe_stateless,
-+ "allow MPPE stateful mode", OPT_PRIOSUB | OPT_A2CLR,
-+ &ccp_allowoptions[0].mppe_stateless },
- #endif /* MPPE */
-
- { NULL }
-@@ -246,7 +272,7 @@
- */
- #define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \
- || (opt).predictor_1 || (opt).predictor_2 \
-- || (opt).mppe)
-+ || (opt).lzs || (opt).mppc || (opt).mppe)
-
- /*
- * Local state (mainly for handling reset-reqs and reset-acks).
-@@ -383,6 +409,30 @@
- ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
-
- ccp_allowoptions[0].predictor_1 = 1;
-+
-+ ccp_wantoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */
-+ ccp_wantoptions[0].lzs_mode = LZS_MODE_SEQ;
-+ ccp_wantoptions[0].lzs_hists = 1;
-+ ccp_allowoptions[0].lzs = 0; /* Stac LZS - will be enabled in the future */
-+ ccp_allowoptions[0].lzs_mode = LZS_MODE_SEQ;
-+ ccp_allowoptions[0].lzs_hists = 1;
-+
-+#ifdef MPPE
-+ /* by default allow and request MPPC... */
-+ ccp_wantoptions[0].mppc = ccp_allowoptions[0].mppc = 1;
-+
-+ /* ... and allow but don't request MPPE */
-+ ccp_allowoptions[0].mppe = 1;
-+ ccp_allowoptions[0].mppe_40 = 1;
-+ ccp_allowoptions[0].mppe_56 = 1;
-+ ccp_allowoptions[0].mppe_128 = 1;
-+ ccp_allowoptions[0].mppe_stateless = 1;
-+ ccp_wantoptions[0].mppe = 0;
-+ ccp_wantoptions[0].mppe_40 = 0;
-+ ccp_wantoptions[0].mppe_56 = 0;
-+ ccp_wantoptions[0].mppe_128 = 0;
-+ ccp_wantoptions[0].mppe_stateless = 0;
-+#endif /* MPPE */
- }
-
- /*
-@@ -460,11 +510,11 @@
- if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED) {
- notice("Compression disabled by peer.");
- #ifdef MPPE
-- if (ccp_gotoptions[unit].mppe) {
-+ if (ccp_wantoptions[unit].mppe) {
- error("MPPE disabled, closing LCP");
- lcp_close(unit, "MPPE disabled by peer");
- }
--#endif
-+#endif /* MPPE */
- }
-
- /*
-@@ -492,6 +542,15 @@
- break;
- /* send a reset-ack, which the transmitter will see and
- reset its compression state. */
-+
-+ /* In case of MPPE/MPPC or LZS we shouldn't send CCP_RESETACK,
-+ but we do it in order to reset compressor; CCP_RESETACK is
-+ then silently discarded. See functions ppp_send_frame and
-+ ppp_ccp_peek in ppp_generic.c (Linux only !!!). All the
-+ confusion is caused by the fact that CCP code is splited
-+ into two parts - one part is handled by pppd, the other one
-+ is handled by kernel. */
-+
- fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
- break;
-
-@@ -520,12 +579,11 @@
- fsm_lowerdown(&ccp_fsm[unit]);
-
- #ifdef MPPE
-- if (ccp_gotoptions[unit].mppe) {
-+ if (ccp_wantoptions[unit].mppe) {
- error("MPPE required but peer negotiation failed");
- lcp_close(unit, "MPPE required but peer negotiation failed");
- }
--#endif
--
-+#endif /* MPPE */
- }
-
- /*
-@@ -542,7 +600,7 @@
- all_rejected[f->unit] = 0;
-
- #ifdef MPPE
-- if (go->mppe) {
-+ if (go->mppe || go->mppc) {
- ccp_options *ao = &ccp_allowoptions[f->unit];
- int auth_mschap_bits = auth_done[f->unit];
- int numbits;
-@@ -556,80 +614,109 @@
- * NB: If MPPE is required, all other compression opts are invalid.
- * So, we return right away if we can't do it.
- */
-+ if (ccp_wantoptions[f->unit].mppe) {
-+ /* Leave only the mschap auth bits set */
-+ auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER |
-+ CHAP_MS2_WITHPEER | CHAP_MS2_PEER);
-+ /* Count the mschap auths */
-+ auth_mschap_bits >>= CHAP_MS_SHIFT;
-+ numbits = 0;
-+ do {
-+ numbits += auth_mschap_bits & 1;
-+ auth_mschap_bits >>= 1;
-+ } while (auth_mschap_bits);
-+ if (numbits > 1) {
-+ error("MPPE required, but auth done in both directions.");
-+ lcp_close(f->unit, "MPPE required but not available");
-+ return;
-+ }
-+ if (!numbits) {
-+ error("MPPE required, but MS-CHAP[v2] auth not performed.");
-+ lcp_close(f->unit, "MPPE required but not available");
-+ return;
-+ }
-
-- /* Leave only the mschap auth bits set */
-- auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER |
-- CHAP_MS2_WITHPEER | CHAP_MS2_PEER);
-- /* Count the mschap auths */
-- auth_mschap_bits >>= CHAP_MS_SHIFT;
-- numbits = 0;
-- do {
-- numbits += auth_mschap_bits & 1;
-- auth_mschap_bits >>= 1;
-- } while (auth_mschap_bits);
-- if (numbits > 1) {
-- error("MPPE required, but auth done in both directions.");
-- lcp_close(f->unit, "MPPE required but not available");
-- return;
-- }
-- if (!numbits) {
-- error("MPPE required, but MS-CHAP[v2] auth not performed.");
-- lcp_close(f->unit, "MPPE required but not available");
-- return;
-- }
--
-- /* A plugin (eg radius) may not have obtained key material. */
-- if (!mppe_keys_set) {
-- error("MPPE required, but keys are not available. "
-- "Possible plugin problem?");
-- lcp_close(f->unit, "MPPE required but not available");
-- return;
-- }
--
-- /* LM auth not supported for MPPE */
-- if (auth_done[f->unit] & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) {
-- /* This might be noise */
-- if (go->mppe & MPPE_OPT_40) {
-- notice("Disabling 40-bit MPPE; MS-CHAP LM not supported");
-- go->mppe &= ~MPPE_OPT_40;
-- ccp_wantoptions[f->unit].mppe &= ~MPPE_OPT_40;
-+ /* A plugin (eg radius) may not have obtained key material. */
-+ if (!mppe_keys_set) {
-+ error("MPPE required, but keys are not available. "
-+ "Possible plugin problem?");
-+ lcp_close(f->unit, "MPPE required but not available");
-+ return;
- }
- }
-
-- /* Last check: can we actually negotiate something? */
-- if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) {
-- /* Could be misconfig, could be 40-bit disabled above. */
-- error("MPPE required, but both 40-bit and 128-bit disabled.");
-- lcp_close(f->unit, "MPPE required but not available");
-- return;
-+ /*
-+ * Check whether the kernel knows about the various
-+ * compression methods we might request. Key material
-+ * unimportant here.
-+ */
-+ if (go->mppc) {
-+ opt_buf[0] = CI_MPPE;
-+ opt_buf[1] = CILEN_MPPE;
-+ opt_buf[2] = 0;
-+ opt_buf[3] = 0;
-+ opt_buf[4] = 0;
-+ opt_buf[5] = MPPE_MPPC;
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 0) <= 0)
-+ go->mppc = 0;
-+ }
-+ if (go->mppe_40) {
-+ opt_buf[0] = CI_MPPE;
-+ opt_buf[1] = CILEN_MPPE;
-+ opt_buf[2] = MPPE_STATELESS;
-+ opt_buf[3] = 0;
-+ opt_buf[4] = 0;
-+ opt_buf[5] = MPPE_40BIT;
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0)
-+ go->mppe_40 = 0;
-+ }
-+ if (go->mppe_56) {
-+ opt_buf[0] = CI_MPPE;
-+ opt_buf[1] = CILEN_MPPE;
-+ opt_buf[2] = MPPE_STATELESS;
-+ opt_buf[3] = 0;
-+ opt_buf[4] = 0;
-+ opt_buf[5] = MPPE_56BIT;
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0)
-+ go->mppe_56 = 0;
-+ }
-+ if (go->mppe_128) {
-+ opt_buf[0] = CI_MPPE;
-+ opt_buf[1] = CILEN_MPPE;
-+ opt_buf[2] = MPPE_STATELESS;
-+ opt_buf[3] = 0;
-+ opt_buf[4] = 0;
-+ opt_buf[5] = MPPE_128BIT;
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0)
-+ go->mppe_128 = 0;
-+ }
-+ if (!go->mppe_40 && !go->mppe_56 && !go->mppe_128) {
-+ if (ccp_wantoptions[f->unit].mppe) {
-+ error("MPPE required, but kernel has no support.");
-+ lcp_close(f->unit, "MPPE required but not available");
-+ }
-+ go->mppe = go->mppe_stateless = 0;
-+ } else {
-+ /* MPPE is not compatible with other compression types */
-+ if (ccp_wantoptions[f->unit].mppe) {
-+ ao->bsd_compress = go->bsd_compress = 0;
-+ ao->predictor_1 = go->predictor_1 = 0;
-+ ao->predictor_2 = go->predictor_2 = 0;
-+ ao->deflate = go->deflate = 0;
-+ ao->lzs = go->lzs = 0;
-+ }
- }
--
-- /* sync options */
-- ao->mppe = go->mppe;
-- /* MPPE is not compatible with other compression types */
-- ao->bsd_compress = go->bsd_compress = 0;
-- ao->predictor_1 = go->predictor_1 = 0;
-- ao->predictor_2 = go->predictor_2 = 0;
-- ao->deflate = go->deflate = 0;
- }
- #endif /* MPPE */
--
-- /*
-- * Check whether the kernel knows about the various
-- * compression methods we might request.
-- */
--#ifdef MPPE
-- if (go->mppe) {
-- opt_buf[0] = CI_MPPE;
-- opt_buf[1] = CILEN_MPPE;
-- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
-- /* Key material unimportant here. */
-- if (ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0) <= 0) {
-- error("MPPE required, but kernel has no support.");
-- lcp_close(f->unit, "MPPE required but not available");
-- }
-+ if (go->lzs) {
-+ opt_buf[0] = CI_LZS;
-+ opt_buf[1] = CILEN_LZS;
-+ opt_buf[2] = go->lzs_hists >> 8;
-+ opt_buf[3] = go->lzs_hists & 0xff;
-+ opt_buf[4] = LZS_MODE_SEQ;
-+ if (ccp_test(f->unit, opt_buf, CILEN_LZS, 0) <= 0)
-+ go->lzs = 0;
- }
--#endif
- if (go->bsd_compress) {
- opt_buf[0] = CI_BSD_COMPRESS;
- opt_buf[1] = CILEN_BSD_COMPRESS;
-@@ -684,7 +771,8 @@
- + (go->deflate? CILEN_DEFLATE: 0)
- + (go->predictor_1? CILEN_PREDICTOR_1: 0)
- + (go->predictor_2? CILEN_PREDICTOR_2: 0)
-- + (go->mppe? CILEN_MPPE: 0);
-+ + (go->lzs? CILEN_LZS: 0)
-+ + ((go->mppe || go->mppc)? CILEN_MPPE: 0);
- }
-
- /*
-@@ -698,6 +786,8 @@
- {
- int res;
- ccp_options *go = &ccp_gotoptions[f->unit];
-+ ccp_options *ao = &ccp_allowoptions[f->unit];
-+ ccp_options *wo = &ccp_wantoptions[f->unit];
- u_char *p0 = p;
-
- /*
-@@ -706,22 +796,43 @@
- * in case it gets Acked.
- */
- #ifdef MPPE
-- if (go->mppe) {
-+ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) {
- u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
-
-- p[0] = opt_buf[0] = CI_MPPE;
-- p[1] = opt_buf[1] = CILEN_MPPE;
-- MPPE_OPTS_TO_CI(go->mppe, &p[2]);
-- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
-+ p[0] = CI_MPPE;
-+ p[1] = CILEN_MPPE;
-+ p[2] = (go->mppe_stateless ? MPPE_STATELESS : 0);
-+ p[3] = 0;
-+ p[4] = 0;
-+ p[5] = (go->mppe_40 ? MPPE_40BIT : 0) | (go->mppe_56 ? MPPE_56BIT : 0) |
-+ (go->mppe_128 ? MPPE_128BIT : 0) | (go->mppc ? MPPE_MPPC : 0);
-+
-+ BCOPY(p, opt_buf, CILEN_MPPE);
- BCOPY(mppe_recv_key, &opt_buf[CILEN_MPPE], MPPE_MAX_KEY_LEN);
- res = ccp_test(f->unit, opt_buf, CILEN_MPPE + MPPE_MAX_KEY_LEN, 0);
-- if (res > 0)
-+ if (res > 0) {
- p += CILEN_MPPE;
-- else
-+ } else {
- /* This shouldn't happen, we've already tested it! */
-- lcp_close(f->unit, "MPPE required but not available in kernel");
-+ go->mppe = go->mppe_40 = go->mppe_56 = go->mppe_128 =
-+ go->mppe_stateless = go->mppc = 0;
-+ if (ccp_wantoptions[f->unit].mppe)
-+ lcp_close(f->unit, "MPPE required but not available in kernel");
-+ }
-+ }
-+#endif /* MPPE */
-+ if (go->lzs) {
-+ p[0] = CI_LZS;
-+ p[1] = CILEN_LZS;
-+ p[2] = go->lzs_hists >> 8;
-+ p[3] = go->lzs_hists & 0xff;
-+ p[4] = LZS_MODE_SEQ;
-+ res = ccp_test(f->unit, p, CILEN_LZS, 0);
-+ if (res > 0) {
-+ p += CILEN_LZS;
-+ } else
-+ go->lzs = 0;
- }
--#endif
- if (go->deflate) {
- p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
- p[1] = CILEN_DEFLATE;
-@@ -807,7 +918,7 @@
-
- /*
- * ccp_ackci - process a received configure-ack, and return
-- * 1 iff the packet was OK.
-+ * 1 if the packet was OK.
- */
- static int
- ccp_ackci(f, p, len)
-@@ -816,24 +927,44 @@
- int len;
- {
- ccp_options *go = &ccp_gotoptions[f->unit];
-+ ccp_options *ao = &ccp_allowoptions[f->unit];
-+ ccp_options *wo = &ccp_wantoptions[f->unit];
- u_char *p0 = p;
-
- #ifdef MPPE
-- if (go->mppe) {
-- u_char opt_buf[CILEN_MPPE];
--
-- opt_buf[0] = CI_MPPE;
-- opt_buf[1] = CILEN_MPPE;
-- MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]);
-- if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE))
-+ if (go->mppe || go->mppc || (!wo->mppe && ao->mppe)) {
-+ if (len < CILEN_MPPE
-+ || p[1] != CILEN_MPPE || p[0] != CI_MPPE
-+ || p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0)
-+ || p[3] != 0
-+ || p[4] != 0
-+ || (p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) |
-+ (go->mppc ? MPPE_MPPC : 0))
-+ && p[5] != ((go->mppe_56 ? MPPE_56BIT : 0) |
-+ (go->mppc ? MPPE_MPPC : 0))
-+ && p[5] != ((go->mppe_128 ? MPPE_128BIT : 0) |
-+ (go->mppc ? MPPE_MPPC : 0))))
- return 0;
-+ if (go->mppe_40 || go->mppe_56 || go->mppe_128)
-+ go->mppe = 1;
- p += CILEN_MPPE;
- len -= CILEN_MPPE;
-+ /* Cope with first/fast ack */
-+ if (p == p0 && len == 0)
-+ return 1;
-+ }
-+#endif /* MPPE */
-+ if (go->lzs) {
-+ if (len < CILEN_LZS || p[0] != CI_LZS || p[1] != CILEN_LZS
-+ || p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff)
-+ || p[4] != LZS_MODE_SEQ)
-+ return 0;
-+ p += CILEN_LZS;
-+ len -= CILEN_LZS;
- /* XXX Cope with first/fast ack */
-- if (len == 0)
-+ if (p == p0 && len == 0)
- return 1;
- }
--#endif
- if (go->deflate) {
- if (len < CILEN_DEFLATE
- || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-@@ -896,7 +1027,7 @@
-
- /*
- * ccp_nakci - process received configure-nak.
-- * Returns 1 iff the nak was OK.
-+ * Returns 1 if the nak was OK.
- */
- static int
- ccp_nakci(f, p, len)
-@@ -905,6 +1036,8 @@
- int len;
- {
- ccp_options *go = &ccp_gotoptions[f->unit];
-+ ccp_options *ao = &ccp_allowoptions[f->unit];
-+ ccp_options *wo = &ccp_wantoptions[f->unit];
- ccp_options no; /* options we've seen already */
- ccp_options try; /* options to ask for next time */
-
-@@ -912,28 +1045,100 @@
- try = *go;
-
- #ifdef MPPE
-- if (go->mppe && len >= CILEN_MPPE
-- && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
-- no.mppe = 1;
-- /*
-- * Peer wants us to use a different strength or other setting.
-- * Fail if we aren't willing to use his suggestion.
-- */
-- MPPE_CI_TO_OPTS(&p[2], try.mppe);
-- if ((try.mppe & MPPE_OPT_STATEFUL) && refuse_mppe_stateful) {
-- error("Refusing MPPE stateful mode offered by peer");
-- try.mppe = 0;
-- } else if (((go->mppe | MPPE_OPT_STATEFUL) & try.mppe) != try.mppe) {
-- /* Peer must have set options we didn't request (suggest) */
-- try.mppe = 0;
-- }
-+ if ((go->mppe || go->mppc || (!wo->mppe && ao->mppe)) &&
-+ len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
-
-- if (!try.mppe) {
-- error("MPPE required but peer negotiation failed");
-- lcp_close(f->unit, "MPPE required but peer negotiation failed");
-+ if (go->mppc) {
-+ no.mppc = 1;
-+ if (!(p[5] & MPPE_MPPC))
-+ try.mppc = 0;
-+ }
-+
-+ if (go->mppe)
-+ no.mppe = 1;
-+ if (go->mppe_40)
-+ no.mppe_40 = 1;
-+ if (go->mppe_56)
-+ no.mppe_56 = 1;
-+ if (go->mppe_128)
-+ no.mppe_128 = 1;
-+ if (go->mppe_stateless)
-+ no.mppe_stateless = 1;
-+
-+ if (ao->mppe_40) {
-+ if ((p[5] & MPPE_40BIT))
-+ try.mppe_40 = 1;
-+ else
-+ try.mppe_40 = (p[5] == 0) ? 1 : 0;
-+ }
-+ if (ao->mppe_56) {
-+ if ((p[5] & MPPE_56BIT))
-+ try.mppe_56 = 1;
-+ else
-+ try.mppe_56 = (p[5] == 0) ? 1 : 0;
-+ }
-+ if (ao->mppe_128) {
-+ if ((p[5] & MPPE_128BIT))
-+ try.mppe_128 = 1;
-+ else
-+ try.mppe_128 = (p[5] == 0) ? 1 : 0;
-+ }
-+
-+ if (ao->mppe_stateless) {
-+ if ((p[2] & MPPE_STATELESS) || wo->mppe_stateless)
-+ try.mppe_stateless = 1;
-+ else
-+ try.mppe_stateless = 0;
-+ }
-+
-+ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128) {
-+ try.mppe = try.mppe_stateless = 0;
-+ if (wo->mppe) {
-+ /* we require encryption, but peer doesn't support it
-+ so we close connection */
-+ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 =
-+ wo->mppe_56 = wo->mppe_128 = 0;
-+ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE "
-+ "key length");
-+ }
-+ }
-+ if (wo->mppe && (wo->mppe_40 != try.mppe_40) &&
-+ (wo->mppe_56 != try.mppe_56) && (wo->mppe_128 != try.mppe_128)) {
-+ /* cannot negotiate key length */
-+ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 =
-+ wo->mppe_56 = wo->mppe_128 = 0;
-+ lcp_close(f->unit, "Cannot negotiate MPPE key length");
- }
-+ if (try.mppe_40 && try.mppe_56 && try.mppe_128)
-+ try.mppe_40 = try.mppe_56 = 0;
-+ else
-+ if (try.mppe_56 && try.mppe_128)
-+ try.mppe_56 = 0;
-+ else
-+ if (try.mppe_40 && try.mppe_128)
-+ try.mppe_40 = 0;
-+ else
-+ if (try.mppe_40 && try.mppe_56)
-+ try.mppe_40 = 0;
-+
-+ p += CILEN_MPPE;
-+ len -= CILEN_MPPE;
- }
- #endif /* MPPE */
-+
-+ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) {
-+ no.lzs = 1;
-+ if (((p[2]<<8)|p[3]) > 1 || (p[4] != LZS_MODE_SEQ &&
-+ p[4] != LZS_MODE_EXT))
-+ try.lzs = 0;
-+ else {
-+ try.lzs_mode = p[4];
-+ try.lzs_hists = (p[2] << 8) | p[3];
-+ }
-+ p += CILEN_LZS;
-+ len -= CILEN_LZS;
-+ }
-+
- if (go->deflate && len >= CILEN_DEFLATE
- && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
- && p[1] == CILEN_DEFLATE) {
-@@ -1006,14 +1211,50 @@
- return -1;
-
- #ifdef MPPE
-- if (go->mppe && len >= CILEN_MPPE
-+ if ((go->mppe || go->mppc) && len >= CILEN_MPPE
- && p[0] == CI_MPPE && p[1] == CILEN_MPPE) {
-- error("MPPE required but peer refused");
-- lcp_close(f->unit, "MPPE required but peer refused");
-+ ccp_options *wo = &ccp_wantoptions[f->unit];
-+ if (p[2] != (go->mppe_stateless ? MPPE_STATELESS : 0) ||
-+ p[3] != 0 ||
-+ p[4] != 0 ||
-+ p[5] != ((go->mppe_40 ? MPPE_40BIT : 0) |
-+ (go->mppe_56 ? MPPE_56BIT : 0) |
-+ (go->mppe_128 ? MPPE_128BIT : 0) |
-+ (go->mppc ? MPPE_MPPC : 0)))
-+ return 0;
-+ if (go->mppc)
-+ try.mppc = 0;
-+ if (go->mppe) {
-+ try.mppe = 0;
-+ if (go->mppe_40)
-+ try.mppe_40 = 0;
-+ if (go->mppe_56)
-+ try.mppe_56 = 0;
-+ if (go->mppe_128)
-+ try.mppe_128 = 0;
-+ if (go->mppe_stateless)
-+ try.mppe_stateless = 0;
-+ if (!try.mppe_56 && !try.mppe_40 && !try.mppe_128)
-+ try.mppe = try.mppe_stateless = 0;
-+ if (wo->mppe) { /* we want MPPE but cannot negotiate key length */
-+ wo->mppc = wo->mppe = wo->mppe_stateless = wo->mppe_40 =
-+ wo->mppe_56 = wo->mppe_128 = 0;
-+ lcp_close(f->unit, "MPPE required but cannot negotiate MPPE "
-+ "key length");
-+ }
-+ }
- p += CILEN_MPPE;
- len -= CILEN_MPPE;
- }
--#endif
-+#endif /* MPPE */
-+ if (go->lzs && len >= CILEN_LZS && p[0] == CI_LZS && p[1] == CILEN_LZS) {
-+ if (p[2] != go->lzs_hists>>8 || p[3] != (go->lzs_hists&0xff)
-+ || p[4] != go->lzs_mode)
-+ return 0;
-+ try.lzs = 0;
-+ p += CILEN_LZS;
-+ len -= CILEN_LZS;
-+ }
- if (go->deflate_correct && len >= CILEN_DEFLATE
- && p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) {
- if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-@@ -1077,14 +1318,15 @@
- int dont_nak;
- {
- int ret, newret, res;
-- u_char *p0, *retp;
-+ u_char *p0, *retp, p2, p5;
- int len, clen, type, nb;
- ccp_options *ho = &ccp_hisoptions[f->unit];
- ccp_options *ao = &ccp_allowoptions[f->unit];
-+ ccp_options *wo = &ccp_wantoptions[f->unit];
- #ifdef MPPE
-- bool rej_for_ci_mppe = 1; /* Are we rejecting based on a bad/missing */
-- /* CI_MPPE, or due to other options? */
--#endif
-+ u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
-+/* int mtu; */
-+#endif /* MPPE */
-
- ret = CONFACK;
- retp = p0 = p;
-@@ -1107,103 +1349,305 @@
- switch (type) {
- #ifdef MPPE
- case CI_MPPE:
-- if (!ao->mppe || clen != CILEN_MPPE) {
-+ if ((!ao->mppc && !ao->mppe) || clen != CILEN_MPPE) {
- newret = CONFREJ;
- break;
- }
-- MPPE_CI_TO_OPTS(&p[2], ho->mppe);
-
-- /* Nak if anything unsupported or unknown are set. */
-- if (ho->mppe & MPPE_OPT_UNSUPPORTED) {
-- newret = CONFNAK;
-- ho->mppe &= ~MPPE_OPT_UNSUPPORTED;
-- }
-- if (ho->mppe & MPPE_OPT_UNKNOWN) {
-+ p2 = p[2];
-+ p5 = p[5];
-+ /* not sure what they want, tell 'em what we got */
-+ if (((p[2] & ~MPPE_STATELESS) != 0 || p[3] != 0 || p[4] != 0 ||
-+ (p[5] & ~(MPPE_40BIT | MPPE_56BIT | MPPE_128BIT |
-+ MPPE_MPPC)) != 0 || p[5] == 0) ||
-+ (p[2] == 0 && p[3] == 0 && p[4] == 0 && p[5] == 0)) {
- newret = CONFNAK;
-- ho->mppe &= ~MPPE_OPT_UNKNOWN;
-+ p[2] = (wo->mppe_stateless ? MPPE_STATELESS : 0);
-+ p[3] = 0;
-+ p[4] = 0;
-+ p[5] = (wo->mppe_40 ? MPPE_40BIT : 0) |
-+ (wo->mppe_56 ? MPPE_56BIT : 0) |
-+ (wo->mppe_128 ? MPPE_128BIT : 0) |
-+ (wo->mppc ? MPPE_MPPC : 0);
-+ break;
- }
-
-- /* Check state opt */
-- if (ho->mppe & MPPE_OPT_STATEFUL) {
-- /*
-- * We can Nak and request stateless, but it's a
-- * lot easier to just assume the peer will request
-- * it if he can do it; stateful mode is bad over
-- * the Internet -- which is where we expect MPPE.
-- */
-- if (refuse_mppe_stateful) {
-- error("Refusing MPPE stateful mode offered by peer");
-+ if ((p[5] & MPPE_MPPC)) {
-+ if (ao->mppc) {
-+ ho->mppc = 1;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ opt_buf[2] = opt_buf[3] = opt_buf[4] = 0;
-+ opt_buf[5] = MPPE_MPPC;
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE, 1) <= 0) {
-+ ho->mppc = 0;
-+ p[5] &= ~MPPE_MPPC;
-+ newret = CONFNAK;
-+ }
-+ } else {
- newret = CONFREJ;
-- break;
-+ if (wo->mppe || ao->mppe) {
-+ p[5] &= ~MPPE_MPPC;
-+ newret = CONFNAK;
-+ }
-+ }
-+ }
-+
-+ if (ao->mppe)
-+ ho->mppe = 1;
-+
-+ if ((p[2] & MPPE_STATELESS)) {
-+ if (ao->mppe_stateless) {
-+ if (wo->mppe_stateless)
-+ ho->mppe_stateless = 1;
-+ else {
-+ newret = CONFNAK;
-+ if (!dont_nak)
-+ p[2] &= ~MPPE_STATELESS;
-+ }
-+ } else {
-+ newret = CONFNAK;
-+ if (!dont_nak)
-+ p[2] &= ~MPPE_STATELESS;
-+ }
-+ } else {
-+ if (wo->mppe_stateless && !dont_nak) {
-+ wo->mppe_stateless = 0;
-+ newret = CONFNAK;
-+ p[2] |= MPPE_STATELESS;
- }
- }
-
-- /* Find out which of {S,L} are set. */
-- if ((ho->mppe & MPPE_OPT_128)
-- && (ho->mppe & MPPE_OPT_40)) {
-- /* Both are set, negotiate the strongest. */
-+ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT|MPPE_128BIT)) {
- newret = CONFNAK;
-- if (ao->mppe & MPPE_OPT_128)
-- ho->mppe &= ~MPPE_OPT_40;
-- else if (ao->mppe & MPPE_OPT_40)
-- ho->mppe &= ~MPPE_OPT_128;
-- else {
-- newret = CONFREJ;
-- break;
-+ if (ao->mppe_128) {
-+ ho->mppe_128 = 1;
-+ p[5] &= ~(MPPE_40BIT|MPPE_56BIT);
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_128 = 0;
-+ p[5] |= (MPPE_40BIT|MPPE_56BIT);
-+ p[5] &= ~MPPE_128BIT;
-+ goto check_mppe_56_40;
-+ }
-+ goto check_mppe;
- }
-- } else if (ho->mppe & MPPE_OPT_128) {
-- if (!(ao->mppe & MPPE_OPT_128)) {
-- newret = CONFREJ;
-- break;
-+ p[5] &= ~MPPE_128BIT;
-+ goto check_mppe_56_40;
-+ }
-+ if ((p[5] & ~MPPE_MPPC) == (MPPE_56BIT|MPPE_128BIT)) {
-+ newret = CONFNAK;
-+ if (ao->mppe_128) {
-+ ho->mppe_128 = 1;
-+ p[5] &= ~MPPE_56BIT;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_128 = 0;
-+ p[5] |= MPPE_56BIT;
-+ p[5] &= ~MPPE_128BIT;
-+ goto check_mppe_56;
-+ }
-+ goto check_mppe;
- }
-- } else if (ho->mppe & MPPE_OPT_40) {
-- if (!(ao->mppe & MPPE_OPT_40)) {
-- newret = CONFREJ;
-- break;
-+ p[5] &= ~MPPE_128BIT;
-+ goto check_mppe_56;
-+ }
-+ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_128BIT)) {
-+ newret = CONFNAK;
-+ if (ao->mppe_128) {
-+ ho->mppe_128 = 1;
-+ p[5] &= ~MPPE_40BIT;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_128 = 0;
-+ p[5] |= MPPE_40BIT;
-+ p[5] &= ~MPPE_128BIT;
-+ goto check_mppe_40;
-+ }
-+ goto check_mppe;
-+ }
-+ p[5] &= ~MPPE_128BIT;
-+ goto check_mppe_40;
-+ }
-+ if ((p[5] & ~MPPE_MPPC) == MPPE_128BIT) {
-+ if (ao->mppe_128) {
-+ ho->mppe_128 = 1;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_128 = 0;
-+ p[5] &= ~MPPE_128BIT;
-+ newret = CONFNAK;
-+ }
-+ goto check_mppe;
-+ }
-+ p[5] &= ~MPPE_128BIT;
-+ newret = CONFNAK;
-+ goto check_mppe;
-+ }
-+ check_mppe_56_40:
-+ if ((p[5] & ~MPPE_MPPC) == (MPPE_40BIT|MPPE_56BIT)) {
-+ newret = CONFNAK;
-+ if (ao->mppe_56) {
-+ ho->mppe_56 = 1;
-+ p[5] &= ~MPPE_40BIT;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_56 = 0;
-+ p[5] |= MPPE_40BIT;
-+ p[5] &= ~MPPE_56BIT;
-+ newret = CONFNAK;
-+ goto check_mppe_40;
-+ }
-+ goto check_mppe;
-+ }
-+ p[5] &= ~MPPE_56BIT;
-+ goto check_mppe_40;
-+ }
-+ check_mppe_56:
-+ if ((p[5] & ~MPPE_MPPC) == MPPE_56BIT) {
-+ if (ao->mppe_56) {
-+ ho->mppe_56 = 1;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_56 = 0;
-+ p[5] &= ~MPPE_56BIT;
-+ newret = CONFNAK;
-+ }
-+ goto check_mppe;
-+ }
-+ p[5] &= ~MPPE_56BIT;
-+ newret = CONFNAK;
-+ goto check_mppe;
-+ }
-+ check_mppe_40:
-+ if ((p[5] & ~MPPE_MPPC) == MPPE_40BIT) {
-+ if (ao->mppe_40) {
-+ ho->mppe_40 = 1;
-+ BCOPY(p, opt_buf, CILEN_MPPE);
-+ BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-+ MPPE_MAX_KEY_LEN);
-+ if (ccp_test(f->unit, opt_buf, CILEN_MPPE +
-+ MPPE_MAX_KEY_LEN, 1) <= 0) {
-+ ho->mppe_40 = 0;
-+ p[5] &= ~MPPE_40BIT;
-+ newret = CONFNAK;
-+ }
-+ goto check_mppe;
-+ }
-+ p[5] &= ~MPPE_40BIT;
-+ }
-+
-+ check_mppe:
-+ if (!ho->mppe_40 && !ho->mppe_56 && !ho->mppe_128) {
-+ if (wo->mppe_40 || wo->mppe_56 || wo->mppe_128) {
-+ newret = CONFNAK;
-+ p[2] |= (wo->mppe_stateless ? MPPE_STATELESS : 0);
-+ p[5] |= (wo->mppe_40 ? MPPE_40BIT : 0) |
-+ (wo->mppe_56 ? MPPE_56BIT : 0) |
-+ (wo->mppe_128 ? MPPE_128BIT : 0) |
-+ (wo->mppc ? MPPE_MPPC : 0);
-+ } else {
-+ ho->mppe = ho->mppe_stateless = 0;
- }
- } else {
-- /* Neither are set. */
-+ /* MPPE is not compatible with other compression types */
-+ if (wo->mppe) {
-+ ao->bsd_compress = 0;
-+ ao->predictor_1 = 0;
-+ ao->predictor_2 = 0;
-+ ao->deflate = 0;
-+ ao->lzs = 0;
-+ }
-+ }
-+ if ((!ho->mppc || !ao->mppc) && !ho->mppe) {
-+ p[2] = p2;
-+ p[5] = p5;
- newret = CONFREJ;
- break;
- }
-
-- /* rebuild the opts */
-- MPPE_OPTS_TO_CI(ho->mppe, &p[2]);
-- if (newret == CONFACK) {
-- u_char opt_buf[CILEN_MPPE + MPPE_MAX_KEY_LEN];
-- int mtu;
--
-- BCOPY(p, opt_buf, CILEN_MPPE);
-- BCOPY(mppe_send_key, &opt_buf[CILEN_MPPE],
-- MPPE_MAX_KEY_LEN);
-- if (ccp_test(f->unit, opt_buf,
-- CILEN_MPPE + MPPE_MAX_KEY_LEN, 1) <= 0) {
-- /* This shouldn't happen, we've already tested it! */
-- error("MPPE required, but kernel has no support.");
-- lcp_close(f->unit, "MPPE required but not available");
-- newret = CONFREJ;
-- break;
-- }
-- /*
-- * We need to decrease the interface MTU by MPPE_PAD
-- * because MPPE frames **grow**. The kernel [must]
-- * allocate MPPE_PAD extra bytes in xmit buffers.
-- */
-- mtu = netif_get_mtu(f->unit);
-- if (mtu)
-- netif_set_mtu(f->unit, mtu - MPPE_PAD);
-- else
-- newret = CONFREJ;
-- }
-+ /*
-+ * I have commented the code below because according to RFC1547
-+ * MTU is only information for higher level protocols about
-+ * "the maximum allowable length for a packet (q.v.) transmitted
-+ * over a point-to-point link without incurring network layer
-+ * fragmentation." Of course a PPP implementation should be able
-+ * to handle overhead added by MPPE - in our case apropriate code
-+ * is located in drivers/net/ppp_generic.c in the kernel sources.
-+ *
-+ * According to RFC1661:
-+ * - when negotiated MRU is less than 1500 octets, a PPP
-+ * implementation must still be able to receive at least 1500
-+ * octets,
-+ * - when PFC is negotiated, a PPP implementation is still
-+ * required to receive frames with uncompressed protocol field.
-+ *
-+ * So why not to handle MPPE overhead without changing MTU value?
-+ * I am sure that RFC3078, unfortunately silently, assumes that.
-+ */
-
- /*
-- * We have accepted MPPE or are willing to negotiate
-- * MPPE parameters. A CONFREJ is due to subsequent
-- * (non-MPPE) processing.
-+ * We need to decrease the interface MTU by MPPE_PAD
-+ * because MPPE frames **grow**. The kernel [must]
-+ * allocate MPPE_PAD extra bytes in xmit buffers.
- */
-- rej_for_ci_mppe = 0;
-+/*
-+ mtu = netif_get_mtu(f->unit);
-+ if (mtu) {
-+ netif_set_mtu(f->unit, mtu - MPPE_PAD);
-+ } else {
-+ newret = CONFREJ;
-+ if (ccp_wantoptions[f->unit].mppe) {
-+ error("Cannot adjust MTU needed by MPPE.");
-+ lcp_close(f->unit, "Cannot adjust MTU needed by MPPE.");
-+ }
-+ }
-+*/
- break;
- #endif /* MPPE */
-+
-+ case CI_LZS:
-+ if (!ao->lzs || clen != CILEN_LZS) {
-+ newret = CONFREJ;
-+ break;
-+ }
-+
-+ ho->lzs = 1;
-+ ho->lzs_hists = (p[2] << 8) | p[3];
-+ ho->lzs_mode = p[4];
-+ if ((ho->lzs_hists != ao->lzs_hists) ||
-+ (ho->lzs_mode != ao->lzs_mode)) {
-+ newret = CONFNAK;
-+ if (!dont_nak) {
-+ p[2] = ao->lzs_hists >> 8;
-+ p[3] = ao->lzs_hists & 0xff;
-+ p[4] = ao->lzs_mode;
-+ } else
-+ break;
-+ }
-+
-+ if (p == p0 && ccp_test(f->unit, p, CILEN_LZS, 1) <= 0) {
-+ newret = CONFREJ;
-+ }
-+ break;
-+
- case CI_DEFLATE:
- case CI_DEFLATE_DRAFT:
- if (!ao->deflate || clen != CILEN_DEFLATE
-@@ -1345,12 +1789,6 @@
- else
- *lenp = retp - p0;
- }
--#ifdef MPPE
-- if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) {
-- error("MPPE required but peer negotiation failed");
-- lcp_close(f->unit, "MPPE required but peer negotiation failed");
-- }
--#endif
- return ret;
- }
-
-@@ -1372,24 +1810,35 @@
- char *p = result;
- char *q = result + sizeof(result); /* 1 past result */
-
-- slprintf(p, q - p, "MPPE ");
-- p += 5;
-- if (opt->mppe & MPPE_OPT_128) {
-- slprintf(p, q - p, "128-bit ");
-- p += 8;
-- }
-- if (opt->mppe & MPPE_OPT_40) {
-- slprintf(p, q - p, "40-bit ");
-- p += 7;
-- }
-- if (opt->mppe & MPPE_OPT_STATEFUL)
-- slprintf(p, q - p, "stateful");
-- else
-- slprintf(p, q - p, "stateless");
--
-+ if (opt->mppe) {
-+ if (opt->mppc) {
-+ slprintf(p, q - p, "MPPC/MPPE ");
-+ p += 10;
-+ } else {
-+ slprintf(p, q - p, "MPPE ");
-+ p += 5;
-+ }
-+ if (opt->mppe_128) {
-+ slprintf(p, q - p, "128-bit ");
-+ p += 8;
-+ } else if (opt->mppe_56) {
-+ slprintf(p, q - p, "56-bit ");
-+ p += 7;
-+ } else if (opt->mppe_40) {
-+ slprintf(p, q - p, "40-bit ");
-+ p += 7;
-+ }
-+ if (opt->mppe_stateless)
-+ slprintf(p, q - p, "stateless");
-+ else
-+ slprintf(p, q - p, "stateful");
-+ } else if (opt->mppc)
-+ slprintf(p, q - p, "MPPC");
- break;
- }
--#endif
-+#endif /* MPPE */
-+ case CI_LZS:
-+ return "Stac LZS";
- case CI_DEFLATE:
- case CI_DEFLATE_DRAFT:
- if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
-@@ -1445,12 +1894,12 @@
- } else if (ANY_COMPRESS(*ho))
- notice("%s transmit compression enabled", method_name(ho, NULL));
- #ifdef MPPE
-- if (go->mppe) {
-+ if (go->mppe || go->mppc) {
- BZERO(mppe_recv_key, MPPE_MAX_KEY_LEN);
- BZERO(mppe_send_key, MPPE_MAX_KEY_LEN);
- continue_networks(f->unit); /* Bring up IP et al */
- }
--#endif
-+#endif /* MPPE */
- }
-
- /*
-@@ -1473,7 +1922,7 @@
- lcp_close(f->unit, "MPPE disabled");
- }
- }
--#endif
-+#endif /* MPPE */
- }
-
- /*
-@@ -1533,24 +1982,28 @@
- #ifdef MPPE
- case CI_MPPE:
- if (optlen >= CILEN_MPPE) {
-- u_char mppe_opts;
--
-- MPPE_CI_TO_OPTS(&p[2], mppe_opts);
-- printer(arg, "mppe %s %s %s %s %s %s%s",
-- (p[2] & MPPE_H_BIT)? "+H": "-H",
-- (p[5] & MPPE_M_BIT)? "+M": "-M",
-- (p[5] & MPPE_S_BIT)? "+S": "-S",
-- (p[5] & MPPE_L_BIT)? "+L": "-L",
-+ printer(arg, "mppe %s %s %s %s %s %s",
-+ (p[2] & MPPE_STATELESS)? "+H": "-H",
-+ (p[5] & MPPE_56BIT)? "+M": "-M",
-+ (p[5] & MPPE_128BIT)? "+S": "-S",
-+ (p[5] & MPPE_40BIT)? "+L": "-L",
- (p[5] & MPPE_D_BIT)? "+D": "-D",
-- (p[5] & MPPE_C_BIT)? "+C": "-C",
-- (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": "");
-- if (mppe_opts & MPPE_OPT_UNKNOWN)
-+ (p[5] & MPPE_MPPC)? "+C": "-C");
-+ if ((p[5] & ~(MPPE_56BIT | MPPE_128BIT | MPPE_40BIT |
-+ MPPE_D_BIT | MPPE_MPPC)) ||
-+ (p[2] & ~MPPE_STATELESS))
- printer(arg, " (%.2x %.2x %.2x %.2x)",
- p[2], p[3], p[4], p[5]);
- p += CILEN_MPPE;
- }
- break;
--#endif
-+#endif /* MPPE */
-+ case CI_LZS:
-+ if (optlen >= CILEN_LZS) {
-+ printer(arg, "lzs %.2x %.2x %.2x", p[2], p[3], p[4]);
-+ p += CILEN_LZS;
-+ }
-+ break;
- case CI_DEFLATE:
- case CI_DEFLATE_DRAFT:
- if (optlen >= CILEN_DEFLATE) {
-@@ -1636,6 +2089,7 @@
- error("Lost compression sync: disabling compression");
- ccp_close(unit, "Lost compression sync");
- #ifdef MPPE
-+ /* My module dosn't need this. J.D., 2003-07-06 */
- /*
- * If we were doing MPPE, we must also take the link down.
- */
-@@ -1643,9 +2097,18 @@
- error("Too many MPPE errors, closing LCP");
- lcp_close(unit, "Too many MPPE errors");
- }
--#endif
-+#endif /* MPPE */
- } else {
- /*
-+ * When LZS or MPPE/MPPC is negotiated we just send CCP_RESETREQ
-+ * and don't wait for CCP_RESETACK
-+ */
-+ if ((ccp_gotoptions[f->unit].method == CI_LZS) ||
-+ (ccp_gotoptions[f->unit].method == CI_MPPE)) {
-+ fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
-+ return;
-+ }
-+ /*
- * Send a reset-request to reset the peer's compressor.
- * We don't do that if we are still waiting for an
- * acknowledgement to a previous reset-request.
-@@ -1676,4 +2139,3 @@
- } else
- ccp_localstate[f->unit] &= ~RACK_PENDING;
- }
--
-diff -ruN ppp-2.4.2.orig/pppd/ccp.h ppp-2.4.2-stdopt/pppd/ccp.h
---- ppp-2.4.2.orig/pppd/ccp.h 2002-12-05 00:03:32.000000000 +0100
-+++ ppp-2.4.2-stdopt/pppd/ccp.h 2004-01-21 06:51:09.000000000 +0100
-@@ -42,9 +42,17 @@
- bool predictor_2; /* do Predictor-2? */
- bool deflate_correct; /* use correct code for deflate? */
- bool deflate_draft; /* use draft RFC code for deflate? */
-+ bool lzs; /* do Stac LZS? */
-+ bool mppc; /* do MPPC? */
- bool mppe; /* do MPPE? */
-+ bool mppe_40; /* allow 40 bit encryption? */
-+ bool mppe_56; /* allow 56 bit encryption? */
-+ bool mppe_128; /* allow 128 bit encryption? */
-+ bool mppe_stateless; /* allow stateless encryption */
- u_short bsd_bits; /* # bits/code for BSD Compress */
- u_short deflate_size; /* lg(window size) for Deflate */
-+ u_short lzs_mode; /* LZS check mode */
-+ u_short lzs_hists; /* number of LZS histories */
- short method; /* code for chosen compression method */
- } ccp_options;
-
-diff -ruN ppp-2.4.2.orig/pppd/chap_ms.c ppp-2.4.2-stdopt/pppd/chap_ms.c
---- ppp-2.4.2.orig/pppd/chap_ms.c 2003-11-18 11:42:56.000000000 +0100
-+++ ppp-2.4.2-stdopt/pppd/chap_ms.c 2004-01-21 06:51:09.000000000 +0100
-@@ -858,13 +858,17 @@
- /*
- * Disable undesirable encryption types. Note that we don't ENABLE
- * any encryption types, to avoid overriding manual configuration.
-+ *
-+ * It seems that 56 bit keys are unsupported in MS-RADIUS (see RFC 2548)
- */
- switch(types) {
- case MPPE_ENC_TYPES_RC4_40:
-- ccp_wantoptions[0].mppe &= ~MPPE_OPT_128; /* disable 128-bit */
-+ ccp_wantoptions[0].mppe_128 = 0; /* disable 128-bit */
-+ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */
- break;
- case MPPE_ENC_TYPES_RC4_128:
-- ccp_wantoptions[0].mppe &= ~MPPE_OPT_40; /* disable 40-bit */
-+ ccp_wantoptions[0].mppe_56 = 0; /* disable 56-bit */
-+ ccp_wantoptions[0].mppe_40 = 0; /* disable 40-bit */
- break;
- default:
- break;
-diff -ruN ppp-2.4.2.orig/pppd/pppd.8 ppp-2.4.2-stdopt/pppd/pppd.8
---- ppp-2.4.2.orig/pppd/pppd.8 2004-01-15 06:09:00.000000000 +0100
-+++ ppp-2.4.2-stdopt/pppd/pppd.8 2004-01-21 06:51:09.000000000 +0100
-@@ -614,6 +614,9 @@
- Enables the use of PPP multilink; this is an alias for the `multilink'
- option. This option is currently only available under Linux.
- .TP
-+.B mppc
-+Enables MPPC (Microsoft Point to Point Compression). This is the default.
-+.TP
- .B mppe-stateful
- Allow MPPE to use stateful mode. Stateless mode is still attempted first.
- The default is to disallow stateful mode.
-@@ -749,12 +752,18 @@
- Disables the use of PPP multilink. This option is currently only
- available under Linux.
- .TP
-+.B nomppc
-+Diasables MPPC (Microsoft Point to Point Compression).
-+.TP
- .B nomppe
- Disables MPPE (Microsoft Point to Point Encryption). This is the default.
- .TP
- .B nomppe-40
- Disable 40\-bit encryption with MPPE.
- .TP
-+.B nomppe-56
-+Disable 56\-bit encryption with MPPE.
-+.TP
- .B nomppe-128
- Disable 128\-bit encryption with MPPE.
- .TP
-@@ -951,6 +960,9 @@
- .B require-mppe-40
- Require the use of MPPE, with 40\-bit encryption.
- .TP
-+.B require-mppe-56
-+Require the use of MPPE, with 56\-bit encryption.
-+.TP
- .B require-mppe-128
- Require the use of MPPE, with 128\-bit encryption.
- .TP
-diff -ruN ppp-2.4.2.orig/pppd/sha1.c ppp-2.4.2-stdopt/pppd/sha1.c
---- ppp-2.4.2.orig/pppd/sha1.c 2002-04-02 15:54:59.000000000 +0200
-+++ ppp-2.4.2-stdopt/pppd/sha1.c 2004-08-15 15:00:55.000000000 +0200
-@@ -21,7 +21,7 @@
- #include "sha1.h"
-
- static void
--SHA1_Transform(unsigned long[5], const unsigned char[64]);
-+SHA1_Transform(u_int32_t state[5], const u_int8_t buffer[64]);
-
- #define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits))))
-
-@@ -42,17 +42,17 @@
- /* Hash a single 512-bit block. This is the core of the algorithm. */
-
- static void
--SHA1_Transform(unsigned long state[5], const unsigned char buffer[64])
-+SHA1_Transform(u_int32_t state[5], const u_int8_t buffer[64])
- {
-- unsigned long a, b, c, d, e;
-+ u_int32_t a, b, c, d, e;
- typedef union {
-- unsigned char c[64];
-- unsigned long l[16];
-+ u_int8_t c[64];
-+ u_int32_t l[16];
- } CHAR64LONG16;
- CHAR64LONG16 *block;
-
- #ifdef SHA1HANDSOFF
-- static unsigned char workspace[64];
-+ static u_int8_t workspace[64];
- block = (CHAR64LONG16 *) workspace;
- memcpy(block, buffer, 64);
- #else
-@@ -114,9 +114,9 @@
- /* Run your data through this. */
-
- void
--SHA1_Update(SHA1_CTX *context, const unsigned char *data, unsigned int len)
-+SHA1_Update(SHA1_CTX *context, const u_int8_t *data, u_int32_t len)
- {
-- unsigned int i, j;
-+ u_int32_t i, j;
-
- j = (context->count[0] >> 3) & 63;
- if ((context->count[0] += len << 3) < (len << 3)) context->count[1]++;
-@@ -139,22 +139,24 @@
- /* Add padding and return the message digest. */
-
- void
--SHA1_Final(unsigned char digest[20], SHA1_CTX *context)
-+SHA1_Final(u_int8_t digest[SHA1_SIGNATURE_SIZE], SHA1_CTX *context)
- {
-- unsigned long i, j;
-- unsigned char finalcount[8];
-+ u_int32_t i, j;
-+ u_int8_t finalcount[8];
-
- for (i = 0; i < 8; i++) {
-- finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)]
-+ finalcount[i] = (u_int8_t) ((context->count[(i >= 4 ? 0 : 1)]
- >> ((3-(i & 3)) * 8) ) & 255); /* Endian independent */
- }
-- SHA1_Update(context, (unsigned char *) "\200", 1);
-+ SHA1_Update(context, (u_int8_t *) "\200", 1);
- while ((context->count[0] & 504) != 448) {
-- SHA1_Update(context, (unsigned char *) "\0", 1);
-+ SHA1_Update(context, (u_int8_t *) "\0", 1);
- }
-+
- SHA1_Update(context, finalcount, 8); /* Should cause a SHA1Transform() */
-+
- for (i = 0; i < 20; i++) {
-- digest[i] = (unsigned char)
-+ digest[i] = (u_int8_t)
- ((context->state[i>>2] >> ((3-(i & 3)) * 8) ) & 255);
- }
- /* Wipe variables */
-@@ -167,4 +169,3 @@
- SHA1Transform(context->state, context->buffer);
- #endif
- }
--
-diff -ruN ppp-2.4.2.orig/pppd/sha1.h ppp-2.4.2-stdopt/pppd/sha1.h
---- ppp-2.4.2.orig/pppd/sha1.h 2002-11-09 12:24:42.000000000 +0100
-+++ ppp-2.4.2-stdopt/pppd/sha1.h 2004-08-15 15:00:55.000000000 +0200
-@@ -8,6 +8,8 @@
-
- #ifndef __SHA1_INCLUDE_
-
-+#include <sys/types.h>
-+
- #ifndef SHA1_SIGNATURE_SIZE
- #ifdef SHA_DIGESTSIZE
- #define SHA1_SIGNATURE_SIZE SHA_DIGESTSIZE
-@@ -17,14 +19,14 @@
- #endif
-
- typedef struct {
-- unsigned long state[5];
-- unsigned long count[2];
-- unsigned char buffer[64];
-+ u_int32_t state[5];
-+ u_int32_t count[2];
-+ u_int8_t buffer[64];
- } SHA1_CTX;
-
- extern void SHA1_Init(SHA1_CTX *);
--extern void SHA1_Update(SHA1_CTX *, const unsigned char *, unsigned int);
--extern void SHA1_Final(unsigned char[SHA1_SIGNATURE_SIZE], SHA1_CTX *);
-+extern void SHA1_Update(SHA1_CTX *, const u_int8_t *, u_int32_t);
-+extern void SHA1_Final(u_int8_t[SHA1_SIGNATURE_SIZE], SHA1_CTX *);
-
- #define __SHA1_INCLUDE_
- #endif /* __SHA1_INCLUDE_ */
+++ /dev/null
-diff -ruN poptop-old/Makefile.in poptop-new/Makefile.in
---- poptop-old/Makefile.in 2003-02-06 17:39:45.000000000 +0100
-+++ poptop-new/Makefile.in 2004-04-04 15:50:17.000000000 +0200
-@@ -74,8 +74,9 @@
- AUTOMAKE_OPTIONS = no-dependencies foreign
-
- INCLUDES = -I.
--CFLAGS = -O2 -fno-builtin -Wall -ansi -DSBINDIR='"$(sbindir)"'
--#CFLAGS = -O2 -fno-builtin -Wall -ansi -pedantic -Wmissing-prototypes -Werror -DSBINDIR='"$(sbindir)"'
-+CCOPTS = -O2 -fno-builtin
-+CFLAGS = $(CCOPTS) -Wall -ansi -DSBINDIR='"$(sbindir)"'
-+#CFLAGS = $(CCOPTS) -Wall -ansi -pedantic -Wmissing-prototypes -Werror -DSBINDIR='"$(sbindir)"'
-
- man_MANS = pptpctrl.8 pptpd.8 pptpd.conf.5
-
+++ /dev/null
---- tcpdump-3.8.3.orig/debian/copyright
-+++ tcpdump-3.8.3/debian/copyright
-@@ -0,0 +1,116 @@
-+This package was debianized by Anand Kumria <wildfire@progsoc.org> on
-+Wed, 22 Nov 2000 13:19:33 +1100.
-+It is now maintained by:
-+ + Torsten Landschoff <torsten@debian.org>
-+ + Romain Francoise <rfrancoise@debian.org>
-+
-+It was downloaded from http://tcpdump.org/release/tcpdump-3.8.3.tar.gz
-+
-+Upstream Authors: tcpdump-workers@tcpdump.org
-+
-+Licensed under the 3-clause BSD license:
-+
-+ Redistribution and use in source and binary forms, with or without
-+ modification, are permitted provided that the following conditions
-+ are met:
-+
-+ 1. Redistributions of source code must retain the above copyright
-+ notice, this list of conditions and the following disclaimer.
-+ 2. Redistributions in binary form must reproduce the above copyright
-+ notice, this list of conditions and the following disclaimer in
-+ the documentation and/or other materials provided with the
-+ distribution.
-+ 3. The names of the authors may not be used to endorse or promote
-+ products derived from this software without specific prior
-+ written permission.
-+
-+ THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-+ IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-+
-+Current upstream maintainers:
-+ Bill Fenner <fenner@research.att.com>
-+ Fulvio Risso <risso@polito.it>
-+ Guy Harris <guy@alum.mit.edu>
-+ Hannes Gredler <hannes@juniper.net>
-+ Jun-ichiro itojun Hagino <itojun@iijlab.net>
-+ Michael Richardson <mcr@sandelman.ottawa.on.ca>
-+
-+Additional people who have contributed patches:
-+
-+ Alan Bawden <Alan@LCS.MIT.EDU>
-+ Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
-+ Albert Chin <china@thewrittenword.com>
-+ Andrew Brown <atatat@atatdot.net>
-+ Antti Kantee <pooka@netbsd.org>
-+ Arkadiusz Miskiewicz <misiek@pld.org.pl>
-+ Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
-+ Assar Westerlund <assar@sics.se>
-+ Brian Ginsbach <ginsbach@cray.com>
-+ Charles M. Hannum <mycroft@netbsd.org>
-+ Chris G. Demetriou <cgd@netbsd.org>
-+ Chris Pepper <pepper@mail.reppep.com>
-+ Darren Reed <darrenr@reed.wattle.id.au>
-+ David Kaelbling <drk@sgi.com>
-+ David Young <dyoung@ojctech.com>
-+ Don Ebright <Don.Ebright@compuware.com>
-+ Eric Anderson <anderse@hpl.hp.com>
-+ Franz Schaefer <schaefer@mond.at>
-+ Gianluca Varenni <varenni@netgroup-serv.polito.it>
-+ Gisle Vanem <giva@bgnett.no>
-+ Graeme Hewson <ghewson@cix.compulink.co.uk>
-+ Greg Stark <gsstark@mit.edu>
-+ Greg Troxel <gdt@ir.bbn.com>
-+ Guillaume Pelat <endymion_@users.sourceforge.net>
-+ Hyung Sik Yoon <hsyn@kr.ibm.com>
-+ Igor Khristophorov <igor@atdot.org>
-+ Jan-Philip Velders <jpv@veldersjes.net>
-+ Jason R. Thorpe <thorpej@netbsd.org>
-+ Javier Achirica <achirica@ttd.net>
-+ Jean Tourrilhes <jt@hpl.hp.com>
-+ Jefferson Ogata <jogata@nodc.noaa.gov>
-+ Jesper Peterson <jesper@endace.com>
-+ John Bankier <jbankier@rainfinity.com>
-+ Jon Lindgren <jonl@yubyub.net>
-+ Juergen Schoenwaelder <schoenw@ibr.cs.tu-bs.de>
-+ Kazushi Sugyo <sugyo@pb.jp.nec.com>
-+ Klaus Klein <kleink@netbsd.org>
-+ Koryn Grant <koryn@endace.com>
-+ Krzysztof Halasa <khc@pm.waw.pl>
-+ Lorenzo Cavallaro <sullivan@sikurezza.org>
-+ Loris Degioanni <loris@netgroup-serv.polito.it>
-+ Love Hörnquist-Åstrand <lha@stacken.kth.se>
-+ Maciej W. Rozycki <macro@ds2.pg.gda.pl>
-+ Marcus Felipe Pereira <marcus@task.com.br>
-+ Martin Husemann <martin@netbsd.org>
-+ Mike Wiacek <mike@iroot.net>
-+ Monroe Williams <monroe@pobox.com>
-+ Octavian Cerna <tavy@ylabs.com>
-+ Olaf Kirch <okir@caldera.de>
-+ Onno van der Linden <onno@simplex.nl>
-+ Paul Mundt <lethal@linux-sh.org>
-+ Pavel Kankovsky <kan@dcit.cz>
-+ Peter Fales <peter@fales-lorenz.net>
-+ Peter Jeremy <peter.jeremy@alcatel.com.au>
-+ Phil Wood <cpw@lanl.gov>
-+ Rafal Maszkowski <rzm@icm.edu.pl>
-+ Rick Jones <raj@cup.hp.com>
-+ Scott Barron <sb125499@ohiou.edu>
-+ Scott Gifford <sgifford@tir.com>
-+ Sebastian Krahmer <krahmer@cs.uni-potsdam.de>
-+ Shaun Clowes <delius@progsoc.uts.edu.au>
-+ Solomon Peachy <pizza@shaftnet.org>
-+ Stefan Hudson <hudson@mbay.net>
-+ Takashi Yamamoto <yamt@mwd.biglobe.ne.jp>
-+ Tony Li <tli@procket.com>
-+ Torsten Landschoff <torsten@debian.org>
-+ Uns Lider <unslider@miranda.org>
-+ Uwe Girlich <Uwe.Girlich@philosys.de>
-+ Xianjie Zhang <xzhang@cup.hp.com>
-+ Yen Yen Lim
-+ Yoann Vandoorselaere <yoann@prelude-ids.org>
-+
-+The original LBL crew:
-+ Steve McCanne
-+ Craig Leres
-+ Van Jacobson
---- tcpdump-3.8.3.orig/debian/tcpdump.docs
-+++ tcpdump-3.8.3/debian/tcpdump.docs
-@@ -0,0 +1 @@
-+README
---- tcpdump-3.8.3.orig/debian/changelog
-+++ tcpdump-3.8.3/debian/changelog
-@@ -0,0 +1,272 @@
-+tcpdump (3.8.3-3) unstable; urgency=low
-+
-+ * debian/patches/40_ipv6cp.dpatch: New patch, do not try to print IPV6CP
-+ ppp packets, the dissector doesn't support it (closes: #255179).
-+ * debian/patches/00list: Add 40_ipv6cp.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Sat, 19 Jun 2004 15:01:27 +0200
-+
-+tcpdump (3.8.3-2) unstable; urgency=low
-+
-+ * debian/rules: Enable crypto support (closes: #82581, #93428).
-+ * debian/control:
-+ + Build-Depend on libssl-dev.
-+ + Put back URL markers in description.
-+ + Switch Maintainer and Uploaders fields to match reality.
-+ * debian/patches/30_openssl_des.dpatch: Patch to make upstream's
-+ configure script check for DES_cbc_encrypt instead of des_cbc_encrypt,
-+ (the function got renamed in OpenSSL 0.9.7), which saves us the hassle
-+ of re-running autoconf. Temporary hack since upstream has fixed this
-+ in CVS already.
-+ * debian/patches/00list: Add 30_openssl_des.
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Fri, 14 May 2004 22:14:08 +0200
-+
-+tcpdump (3.8.3-1) unstable; urgency=low
-+
-+ * New upstream release.
-+ * debian/rules:
-+ + Add -D_FILE_OFFSET_BITS=64 to default CFLAGS to match libpcap
-+ (closes: #154762).
-+ + Use dpatch for patch management.
-+ + Clean up CFLAGS handling.
-+ + Support DEB_BUILD_OPTIONS.
-+ * debian/control:
-+ + Build-Depend on libpcap0.8-dev, dpatch.
-+ + Add versioned Build-Depends on debhelper.
-+ + Remove Emacs-style URL markers from description.
-+ * debian/compat: New file.
-+ * debian/copyright: Update.
-+ * debian/tcpdump.docs: Do not install upstream INSTALL file.
-+ * debian/patches: New directory.
-+ * debian/patches/10_man_install.dpatch: Patch split off the Debian diff
-+ to change man install paths in upstream Makefile.in.
-+ * debian/patches/20_man_fixes.dpatch: Patch split off the Debian diff to
-+ fix some inconsistencies in the upstream man page.
-+ * debian/patches/00list: New file (patch list).
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Tue, 11 May 2004 14:02:09 +0200
-+
-+tcpdump (3.7.2-4) unstable; urgency=high
-+
-+ * Urgency high due to security fixes.
-+ * Backport changes from upstream CVS to fix ISAKMP payload handling
-+ denial-of-service vulnerabilities (CAN-2004-0183, CAN-2004-0184).
-+ Detailed changes (with corresponding upstream revisions):
-+ + Add length checks in isakmp_id_print() (print-isakmp.c, rev. 1.47)
-+ + Add data checks all over the place, change rawprint() prototype and
-+ add corresponding return value checks (print-isakmp.c, rev. 1.46)
-+ + Add missing ntohs() and change length initialization in
-+ isakmp_id_print(), not porting prototype changes (print-isakmp.c,
-+ rev. 1.45)
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Tue, 6 Apr 2004 19:39:24 +0200
-+
-+tcpdump (3.7.2-3) unstable; urgency=low
-+
-+ * Backport changes from upstream CVS to fix several vulnerabilities in
-+ ISAKMP, L2TP and Radius parsing (closes: #227844, #227845, #227846).
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Sat, 17 Jan 2004 14:12:30 +0100
-+
-+tcpdump (3.7.2-2) unstable; urgency=low
-+
-+ * Acknowledge NMU by Romain (closes: #208543).
-+ * Apply man page fixes by Romain:
-+ + networks(4) changed to networks(5) (closes: #194180).
-+ + ethers(3N) changed to ethers(5) (closes: #197888).
-+ * debian/control: Added Romain Francoise as co maintainer. Thanks for
-+ your help, Romain!
-+
-+ -- Torsten Landschoff <torsten@debian.org> Sun, 19 Oct 2003 04:12:31 +0200
-+
-+tcpdump (3.7.2-1.1) unstable; urgency=low
-+
-+ * NMU
-+ * Reverse order of #include directives in print-sctp.c so that
-+ IPPROTO_SCTP is defined (closes: #208543).
-+
-+ -- Romain Francoise <rfrancoise@debian.org> Sun, 12 Oct 2003 17:06:01 +0200
-+
-+tcpdump (3.7.2-1) unstable; urgency=low
-+
-+ * New upstream release (closes: #195816).
-+
-+ -- Torsten Landschoff <torsten@debian.org> Sun, 8 Jun 2003 00:14:44 +0200
-+
-+tcpdump (3.7.1-1.2) unstable; urgency=high
-+
-+ * Non-maintainer upload
-+ * Apply security fixes from 3.7.2
-+ - Fixed infinite loop when parsing malformed isakmp packets.
-+ (CAN-2003-0108)
-+ - Fixed infinite loop when parsing malformed BGP packets.
-+ - Fixed buffer overflow with certain malformed NFS packets.
-+
-+ -- Matt Zimmerman <mdz@debian.org> Thu, 27 Feb 2003 11:00:32 -0500
-+
-+tcpdump (3.7.1-1.1) unstable; urgency=low
-+
-+ * NMU
-+ * Simple rebuild to deal with libpcap0->libpcap0.7 transition.
-+ Sourceful NMU so that every arch rebuilds it.
-+
-+ -- LaMont Jones <lamont@debian.org> Wed, 14 Aug 2002 21:25:45 -0600
-+
-+tcpdump (3.7.1-1) unstable; urgency=low
-+
-+ * New upstream release (closes: #138052).
-+
-+ -- Torsten Landschoff <torsten@debian.org> Sat, 3 Aug 2002 23:54:04 +0200
-+
-+tcpdump (3.6.2-2) unstable; urgency=HIGH
-+
-+ * print-rx.c: Take the version from current CVS fixing the remote
-+ buffer overflow reported in FreeBSD Security Advisory SA-01:48
-+ yesterday. Thanks to Matt Zimmerman for forwarding the report,
-+ I might have missed it.
-+ * debian/control: Clean the Build-Depends from build-essential
-+ packages.
-+
-+ -- Torsten Landschoff <torsten@debian.org> Thu, 19 Jul 2001 15:03:48 +0200
-+
-+tcpdump (3.6.2-1) unstable; urgency=low
-+
-+ * New upstream release.
-+
-+ -- Torsten Landschoff <torsten@debian.org> Tue, 6 Mar 2001 04:18:16 +0100
-+
-+tcpdump (3.6.1-2) unstable; urgency=low
-+
-+ * debian/rules: Force support for IPv6 (closes: #82665).
-+ * print-icmp6.c: Removed duplicate definition also in icmp6.h to
-+ get the package to compile with IPv6.
-+ * Rebuild should fix the missing libpcap0-dependency (closes: #82666).
-+ Additional info: The missing dependency was because the configure
-+ script found my libpcap sources in the parent directory. Black magic
-+ always works against you :(
-+
-+ -- Torsten Landschoff <torsten@debian.org> Thu, 18 Jan 2001 00:44:01 +0100
-+
-+tcpdump (3.6.1-1) unstable; urgency=high
-+
-+ * Taking back the package. Kudos to Anand for his help.
-+ * New upstream release. This release fixes a security hole in print-rx.c.
-+ * debian/rules: Disable crypto support (closes: #81969).
-+ * Removed empty README.Debian (closes: #81966).
-+
-+ -- Torsten Landschoff <torsten@debian.org> Tue, 16 Jan 2001 16:04:03 +0100
-+
-+tcpdump (3.5.2-3) unstable; urgency=low
-+
-+ * Fixup dependancy stuff. Sheesh. (Closes: #78063, #78081, #78082)
-+
-+ -- Anand Kumria <wildfire@progsoc.org> Tue, 28 Nov 2000 02:16:01 +1100
-+
-+tcpdump (3.5.2-2) unstable; urgency=low
-+
-+ * Update both config.guess and config.sub (Closes: #36692, #53145)
-+ * Opps, make the .diff available.
-+ * We require a particular libpcap version to work (Closes: #77877)
-+
-+ -- Anand Kumria <wildfire@progsoc.org> Mon, 27 Nov 2000 01:13:55 +1100
-+
-+tcpdump (3.5.2-1) unstable; urgency=low
-+
-+ * New Maintainer
-+ * New upstream release (Closes: #75889)
-+ * Upstream added hex dump (-x) and ascii dump (-X) Closes: #23514, #29418)
-+ * Acknowledge and incorporate security fixes (Closes: #63708, #77489)
-+ * Appletalk / Ethertalk patches are in (Closes: #67642)
-+
-+ -- Anand Kumria <wildfire@progsoc.org> Wed, 22 Nov 2000 13:19:33 +1100
-+
-+tcpdump (3.4a6-4.1) frozen unstable; urgency=high
-+
-+ * Non-maintainer upload by security team
-+ * Apply patch from tcpdump-workers mailinglist to fix DNS DoS attack
-+ against tcpdump. Based on patch from Guy Harris <gharris@flashcom.net> as
-+ found on http://www.tcpdump.org/lists/workers/1999/msg00607.html
-+ * Fix Build-Depends entry in debian/control
-+
-+ -- Wichert Akkerman <wakkerma@debian.org> Sun, 7 May 2000 15:17:33 +0200
-+
-+tcpdump (3.4a6-4) unstable; urgency=low
-+
-+ * New maintainer.
-+ * tcpdump.c (main): Reestablish priviliges before closing the device
-+ (closes: #19959).
-+ * It seems the problem with ppp came from the kernel - I can dump
-+ packages on ppp0 just fine... (closes: #25757)
-+ * print-tcp.c (tcp_print): Applied patch from David S. Miller submitted
-+ by Andrea Arcangeli to fix tcpdump sack TCP option interpretation
-+ (closes: #28530).
-+ * print-bootp.c (rfc1048_print): Interpret timezone offset as signed
-+ (closes: #40376). Fixed byte order problem in printing internet
-+ addresses (closes: #40375). Thanks to Roderick Schertler for the patch.
-+ * Several files: Applied SMB patch from samba.org (closes: #27653).
-+ * print-ip.c (ip_print): Check for ip headers with less than 5 longs.
-+ Patch taken from RedHat's source package.
-+ * Redid debian/rules using debhelper.
-+ * Makefile.in: Install the manpage into man8 instead of man1.
-+ * tcpdump.1: Moved to section 8 (admin commands).
-+ * print-smb.c (print_smb): Disabled anything but printing the command
-+ info by default. Otherwise we would get flooded with smb information.
-+ You can get all info using -vvv. Two -v's will give you the SMB headers.
-+ * tcpdump.1: Documented the behaviour described above.
-+
-+ -- Torsten Landschoff <torsten@debian.org> Mon, 22 Nov 1999 01:31:44 +0100
-+
-+tcpdump (3.4a6-3) frozen unstable; urgency=low
-+
-+ * fixed permissions
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Mon, 30 Mar 1998 02:28:39 +0200
-+
-+
-+tcpdump (3.4a6-2) frozen unstable; urgency=low
-+
-+ * rebuild with latest debmake, fixes #19415
-+ (should also fix the lintian warnings)
-+ * updated standards-version
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Mon, 30 Mar 1998 00:28:39 +0200
-+
-+
-+tcpdump (3.4a6-1) unstable; urgency=low
-+
-+ * updated to latest upstream version, fixes: Bug#17163
-+ * install changelog.Debian compressed, fixes: Bug#15417
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Sun, 1 Feb 1998 00:08:31 +0100
-+
-+
-+tcpdump (3.4a4-1) unstable; urgency=low
-+
-+ * updated to latest upstream version
-+ * libc6 version
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Wed, 17 Sep 1997 23:22:54 +0200
-+
-+
-+tcpdump (3.3.1a2-1) frozen stable unstable; urgency=medium
-+
-+ * updated to latest upstream version (works with new libpcap now)
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Sat, 24 May 1997 00:49:17 +0200
-+
-+
-+tcpdump (3.3-2) unstable; urgency=low
-+
-+ * fixed SLIP support
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Sun, 16 Feb 1997 21:06:51 +0100
-+
-+
-+tcpdump (3.3-1) unstable; urgency=low
-+
-+ * updated to latest upstream version
-+
-+ -- Peter Tobias <tobias@et-inf.fho-emden.de> Thu, 16 Jan 1997 01:34:00 +0100
-+
-+
---- tcpdump-3.8.3.orig/debian/control
-+++ tcpdump-3.8.3/debian/control
-@@ -0,0 +1,23 @@
-+Source: tcpdump
-+Section: net
-+Priority: optional
-+Maintainer: Romain Francoise <rfrancoise@debian.org>
-+Uploaders: Torsten Landschoff <torsten@debian.org>
-+Build-Depends: debhelper (>= 4), libpcap0.8-dev, dpatch, libssl-dev
-+Standards-Version: 3.6.1.0
-+
-+Package: tcpdump
-+Architecture: any
-+Depends: ${shlibs:Depends}
-+Description: A powerful tool for network monitoring and data acquisition
-+ This program allows you to dump the traffic on a network. tcpdump
-+ is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
-+ BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
-+ types.
-+ .
-+ It can be used to print out the headers of packets on a network
-+ interface, filter packets that match a certain expression. You can
-+ use this tool to track down network problems, to detect "ping attacks"
-+ or to monitor network activities.
-+ .
-+ Further information is available at <URL: http://www.tcpdump.org/>
---- tcpdump-3.8.3.orig/debian/tcpdump.dirs
-+++ tcpdump-3.8.3/debian/tcpdump.dirs
-@@ -0,0 +1 @@
-+usr/sbin
---- tcpdump-3.8.3.orig/debian/tcpdump.examples
-+++ tcpdump-3.8.3/debian/tcpdump.examples
-@@ -0,0 +1,4 @@
-+atime.awk
-+packetdat.awk
-+send-ack.awk
-+stime.awk
---- tcpdump-3.8.3.orig/debian/rules
-+++ tcpdump-3.8.3/debian/rules
-@@ -0,0 +1,70 @@
-+#!/usr/bin/make -f
-+
-+include /usr/share/dpatch/dpatch.make
-+
-+export DH_VERBOSE=1
-+
-+dstdir := $(shell pwd)/debian/tcpdump
-+
-+export CFLAGS=-D_FILE_OFFSET_BITS=64
-+
-+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-+ CFLAGS += -O0
-+endif
-+
-+build: patch build-stamp
-+build-stamp:
-+ dh_testdir
-+
-+ ./configure --prefix=/usr --mandir=\$${prefix}/share/man \
-+ --infodir=\$${prefix}/share/info --enable-ipv6
-+ $(MAKE)
-+
-+ touch build-stamp
-+
-+clean: clean-patched unpatch
-+clean-patched:
-+ dh_testdir
-+ dh_testroot
-+ rm -f build-stamp
-+
-+ -$(MAKE) distclean
-+
-+ dh_clean
-+
-+install: build
-+ dh_testdir
-+ dh_testroot
-+ dh_clean -k
-+ dh_installdirs
-+
-+ $(MAKE) install prefix=$(dstdir)/usr
-+
-+
-+# Build architecture-independent files here.
-+binary-indep: build install
-+# We have nothing to do by default.
-+
-+# Build architecture-dependent files here.
-+binary-arch: build install
-+# dh_testversion
-+ dh_testdir
-+ dh_testroot
-+ dh_installdocs
-+ dh_installexamples
-+ dh_installinfo
-+ dh_installchangelogs CHANGES
-+ dh_link
-+ dh_strip
-+ dh_compress
-+ dh_fixperms
-+# dh_makeshlibs
-+ dh_installdeb
-+# dh_perl
-+ dh_shlibdeps
-+ dh_gencontrol
-+ dh_md5sums
-+ dh_builddeb
-+
-+binary: binary-indep binary-arch
-+.PHONY: build clean binary-indep binary-arch binary install
---- tcpdump-3.8.3.orig/debian/patches/10_man_install.dpatch
-+++ tcpdump-3.8.3/debian/patches/10_man_install.dpatch
-@@ -0,0 +1,46 @@
-+#! /bin/sh -e
-+## 10_man_install.dpatch by Romain Francoise <rfrancoise@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Change man page install paths for Debian.
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/Makefile.in tcpdump-3.8.3/Makefile.in
-+--- /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/Makefile.in 2004-05-08 09:12:28.000000000 +0200
-++++ tcpdump-3.8.3/Makefile.in 2004-05-08 09:13:23.000000000 +0200
-+@@ -157,13 +157,13 @@
-+ [ -d $(DESTDIR)$(sbindir) ] || \
-+ (mkdir -p $(DESTDIR)$(sbindir); chmod 755 $(DESTDIR)$(sbindir))
-+ $(INSTALL_PROGRAM) $(PROG) $(DESTDIR)$(sbindir)/$(PROG)
-+- [ -d $(DESTDIR)$(mandir)/man1 ] || \
-+- (mkdir -p $(DESTDIR)$(mandir)/man1; chmod 755 $(DESTDIR)$(mandir)/man1)
-+- $(INSTALL_DATA) $(srcdir)/$(PROG).1 $(DESTDIR)$(mandir)/man1/$(PROG).1
-++ [ -d $(DESTDIR)$(mandir)/man8 ] || \
-++ (mkdir -p $(DESTDIR)$(mandir)/man8; chmod 755 $(DESTDIR)$(mandir)/man8)
-++ $(INSTALL_DATA) $(srcdir)/$(PROG).1 $(DESTDIR)$(mandir)/man8/$(PROG).8
-+
-+ uninstall:
-+ rm -f $(DESTDIR)$(sbindir)/$(PROG)
-+- rm -f $(DESTDIR)$(mandir)/man1/$(PROG).1
-++ rm -f $(DESTDIR)$(mandir)/man8/$(PROG).8
-+
-+ lint: $(GENSRC)
-+ lint -hbxn $(SRC) | \
---- tcpdump-3.8.3.orig/debian/patches/00list
-+++ tcpdump-3.8.3/debian/patches/00list
-@@ -0,0 +1,4 @@
-+10_man_install
-+20_man_fixes
-+30_openssl_des
-+40_ipv6cp
---- tcpdump-3.8.3.orig/debian/patches/20_man_fixes.dpatch
-+++ tcpdump-3.8.3/debian/patches/20_man_fixes.dpatch
-@@ -0,0 +1,67 @@
-+#! /bin/sh -e
-+## 20_man_fixes.dpatch by Romain Francoise <rfrancoise@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Misc. fixes to the upstream man page.
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/tcpdump.1 tcpdump-3.8.3/tcpdump.1
-+--- /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/tcpdump.1 2004-05-08 09:12:32.000000000 +0200
-++++ tcpdump-3.8.3/tcpdump.1 2004-05-08 09:18:27.000000000 +0200
-+@@ -22,7 +22,7 @@
-+ .\" WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-+ .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-+ .\"
-+-.TH TCPDUMP 1 "7 January 2004"
-++.TH TCPDUMP 8 "8 May 2004"
-+ .SH NAME
-+ tcpdump \- dump traffic on a network
-+ .SH SYNOPSIS
-+@@ -672,7 +672,7 @@
-+ True if the ethernet destination address is \fIehost\fP.
-+ \fIEhost\fP
-+ may be either a name from /etc/ethers or a number (see
-+-.IR ethers (3N)
-++.IR ethers (5)
-+ for numeric format).
-+ .IP "\fBether src \fIehost\fP
-+ True if the ethernet source address is \fIehost\fP.
-+@@ -699,7 +699,7 @@
-+ True if the IPv4/v6 destination address of the packet has a network
-+ number of \fInet\fP.
-+ \fINet\fP may be either a name from /etc/networks
-+-or a network number (see \fInetworks(4)\fP for details).
-++or a network number (see \fInetworks(5)\fP for details).
-+ .IP "\fBsrc net \fInet\fR"
-+ True if the IPv4/v6 source address of the packet has a network
-+ number of \fInet\fP.
-+@@ -718,9 +718,9 @@
-+ True if the packet is ip/tcp, ip/udp, ip6/tcp or ip6/udp and has a
-+ destination port value of \fIport\fP.
-+ The \fIport\fP can be a number or a name used in /etc/services (see
-+-.IR tcp (4P)
-++.IR tcp (7)
-+ and
-+-.IR udp (4P)).
-++.IR udp (7)).
-+ If a name is used, both the port
-+ number and protocol are checked.
-+ If a number or ambiguous name is used,
---- tcpdump-3.8.3.orig/debian/patches/30_openssl_des.dpatch
-+++ tcpdump-3.8.3/debian/patches/30_openssl_des.dpatch
-@@ -0,0 +1,57 @@
-+#! /bin/sh -e
-+## 30_openssl_des.dpatch by Romain Francoise <rfrancoise@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Change "des_cbc_encrypt" check to "DES_cbc_encrypt" since it
-+## DP: got renamed in OpenSSL 0.9.7. Super-ugly change to configure,
-+## DP: but it's simpler this way (changing configure.in too while we're
-+## DP: at it).
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/configure tcpdump-3.8.3/configure
-+--- /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/configure 2004-03-28 23:06:09.000000000 +0200
-++++ tcpdump-3.8.3/configure 2004-05-14 21:58:56.000000000 +0200
-+@@ -9760,11 +9760,11 @@
-+ #endif
-+ /* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+-char des_cbc_encrypt ();
-++char DES_cbc_encrypt ();
-+ int
-+ main ()
-+ {
-+-des_cbc_encrypt ();
-++DES_cbc_encrypt ();
-+ ;
-+ return 0;
-+ }
-+diff -urNad /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/configure.in tcpdump-3.8.3/configure.in
-+--- /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/configure.in 2004-03-28 23:04:48.000000000 +0200
-++++ tcpdump-3.8.3/configure.in 2004-05-14 21:58:11.000000000 +0200
-+@@ -732,7 +732,7 @@
-+ if test -f $ac_cv_ssleay_path/lib/librsaref.a; then
-+ LIBS="$LIBS -lrsaref"
-+ fi
-+- AC_CHECK_LIB(crypto, des_cbc_encrypt)
-++ AC_CHECK_LIB(crypto, DES_cbc_encrypt)
-+
-+ CPPFLAGS="$CPPFLAGS $V_INCLS"
-+ AC_CHECK_HEADERS(openssl/evp.h)
---- tcpdump-3.8.3.orig/debian/patches/40_ipv6cp.dpatch
-+++ tcpdump-3.8.3/debian/patches/40_ipv6cp.dpatch
-@@ -0,0 +1,45 @@
-+#! /bin/sh -e
-+## 40_ipv6cp.dpatch by Romain Francoise <rfrancoise@debian.org>
-+##
-+## All lines beginning with `## DP:' are a description of the patch.
-+## DP: Do not try to grok IPV6CP packets, the dissector doesn't
-+## DP: support it.
-+
-+if [ $# -lt 1 ]; then
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1
-+fi
-+
-+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-+patch_opts="${patch_opts:--f --no-backup-if-mismatch} ${2:+-d $2}"
-+
-+case "$1" in
-+ -patch) patch -p1 ${patch_opts} < $0;;
-+ -unpatch) patch -R -p1 ${patch_opts} < $0;;
-+ *)
-+ echo "`basename $0`: script expects -patch|-unpatch as argument" >&2
-+ exit 1;;
-+esac
-+
-+exit 0
-+
-+@DPATCH@
-+diff -urNad /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/print-ppp.c tcpdump-3.8.3/print-ppp.c
-+--- /home/romain/Work/Debian/tcpdump/tcpdump-3.8.3/print-ppp.c 2004-04-17 00:25:32.000000000 +0200
-++++ tcpdump-3.8.3/print-ppp.c 2004-06-19 14:54:40.000000000 +0200
-+@@ -1056,7 +1056,6 @@
-+ case PPP_IPCP:
-+ case PPP_OSICP:
-+ case PPP_MPLSCP:
-+- case PPP_IPV6CP:
-+ case PPP_CCP:
-+ case PPP_BACP:
-+ handle_ctrl_proto(proto, p, length);
-+@@ -1077,6 +1076,7 @@
-+ #ifdef INET6
-+ case ETHERTYPE_IPV6: /*XXX*/
-+ case PPP_IPV6:
-++ case PPP_IPV6CP:
-+ ip6_print(p, length);
-+ break;
-+ #endif
---- tcpdump-3.8.3.orig/debian/compat
-+++ tcpdump-3.8.3/debian/compat
-@@ -0,0 +1 @@
-+4
+++ /dev/null
-diff -ruN vsftpd-1.2.2-old/Makefile vsftpd-1.2.2-new/Makefile
---- vsftpd-1.2.2-old/Makefile 2003-09-15 13:41:58.000000000 +0200
-+++ vsftpd-1.2.2-new/Makefile 2004-05-25 00:25:37.000000000 +0200
-@@ -5,8 +5,8 @@
- #CFLAGS = -g
- CFLAGS = -O2 -Wall -W -Wshadow #-pedantic -Werror -Wconversion
-
--LIBS = `./vsf_findlibs.sh`
--LINK = -Wl,-s
-+LIBS = -lcrypt -lnsl
-+LINK =
-
- OBJS = main.o utility.o prelogin.o ftpcmdio.o postlogin.o privsock.o \
- tunables.o ftpdataio.o secbuf.o ls.o \
-diff -ruN vsftpd-1.2.2-old/tunables.c vsftpd-1.2.2-new/tunables.c
---- vsftpd-1.2.2-old/tunables.c 2004-04-20 02:25:05.000000000 +0200
-+++ vsftpd-1.2.2-new/tunables.c 2004-05-25 00:07:19.000000000 +0200
-@@ -78,7 +78,7 @@
- unsigned int tunable_max_per_ip = 0;
- unsigned int tunable_trans_chunk_size = 0;
-
--const char* tunable_secure_chroot_dir = "/usr/share/empty";
-+const char* tunable_secure_chroot_dir = "/var/run/vsftpd";
- const char* tunable_ftp_username = "ftp";
- const char* tunable_chown_username = "root";
- const char* tunable_xferlog_file = "/var/log/xferlog";
+++ /dev/null
-diff -bBurN WRT54G/release/src/router/rc/Makefile-openwrt WRT54G.new/release/src/router/rc/Makefile-openwrt
---- WRT54G/release/src/router/rc/Makefile-openwrt 1969-12-31 18:00:00.000000000 -0600
-+++ WRT54G.new/release/src/router/rc/Makefile-openwrt 2004-03-03 16:23:40.000000000 -0600
-@@ -0,0 +1,44 @@
-+# Copyright 2001-2003, Broadcom Corporation
-+# All Rights Reserved.
-+#
-+#
-+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE
-+#
-+
-+#
-+# Router Wireless Interface Configuration Utility Makefile
-+#
-+# Copyright 2003, Broadcom Corporation
-+# All Rights Reserved.
-+#
-+#
-+# $Id: Makefile,v 1.2 2004/01/13 00:55:58 mbm Exp $
-+#
-+
-+CFLAGS += -I. -I$(TOP)/shared -I$(SRCBASE)/include -Wall
-+#CFLAGS += -g -DDEBUG
-+CFLAGS += -s -Os
-+LDFLAGS += -L$(TOP)/shared -lshared -L$(TOP)/nvram -lnvram
-+
-+OBJS := mtd.o crc.o #http.o
-+
-+vpath %.c $(TOP)/shared $(SRCBASE)/rts/src
-+
-+all: mtd
-+
-+clean:
-+ rm -f *.o mtd
-+
-+install: all
-+ install -d $(INSTALLDIR)/sbin
-+ install mtd $(INSTALLDIR)/sbin
-+ $(STRIP) $(INSTALLDIR)/sbin/mtd
-+
-+mtd.o: mtd.c
-+ $(CC) -c $^ $(CFLAGS) $(CPPFLAGS) -DOPENWRT_MTD #-DOPENWRT_MTD_HTTP_GET
-+
-+mtd: $(OBJS)
-+ $(CC) -o $@ $^ $(LDFLAGS)
-diff -bBurN WRT54G/release/src/router/rc/mtd.c WRT54G.new/release/src/router/rc/mtd.c
---- WRT54G/release/src/router/rc/mtd.c 2004-01-19 20:34:50.000000000 -0600
-+++ WRT54G.new/release/src/router/rc/mtd.c 2004-03-03 16:24:42.000000000 -0600
-@@ -37,6 +37,86 @@
- #include <cy_conf.h>
- #include <utils.h>
-
-+
-+#ifdef OPENWRT_MTD
-+
-+extern int
-+mtd_open(const char *mtd, int flags);
-+extern int
-+mtd_erase(const char *mtd);
-+extern int
-+mtd_write(const char *path, const char *mtd);
-+
-+/* Slightly modified version of mtd_erase. */
-+int
-+mtd_unlock(const char *mtd)
-+{
-+ int mtd_fd;
-+ mtd_info_t mtd_info;
-+ erase_info_t erase_info;
-+
-+ /* Open MTD device */
-+ if ((mtd_fd = mtd_open(mtd, O_RDWR)) < 0) {
-+ perror(mtd);
-+ return errno;
-+ }
-+
-+ /* Get sector size */
-+ if (ioctl(mtd_fd, MEMGETINFO, &mtd_info) != 0) {
-+ perror(mtd);
-+ close(mtd_fd);
-+ return errno;
-+ }
-+
-+ erase_info.length = mtd_info.erasesize;
-+
-+ for (erase_info.start = 0;
-+ erase_info.start < mtd_info.size;
-+ erase_info.start += mtd_info.erasesize) {
-+ (void) ioctl(mtd_fd, MEMUNLOCK, &erase_info);
-+/* if (ioctl(mtd_fd, MEMERASE, &erase_info) != 0) { */
-+/* perror(mtd); */
-+/* close(mtd_fd); */
-+/* return errno; */
-+/* } */
-+ }
-+
-+ close(mtd_fd);
-+ return 0;
-+}
-+
-+int main(int argc, char **argv) {
-+ if(argc == 3 && strcasecmp(argv[1],"unlock")==0) {
-+ printf("Unlocking %s\n",argv[2]);
-+ return mtd_unlock(argv[2]);
-+ }
-+ if(argc == 3 && strcasecmp(argv[1],"erase")==0) {
-+ printf("Erasing %s\n",argv[2]);
-+ return mtd_erase(argv[2]);
-+ }
-+ if(argc == 4 && strcasecmp(argv[1],"write")==0) {
-+ printf("writing %s to %s\n",argv[2],argv[3]);
-+ return mtd_write(argv[2],argv[3]);
-+ }
-+
-+ printf("no valid command given\n");
-+ return -1;
-+}
-+
-+#ifndef OPENWRT_MTD_HTTP_GET
-+/* Dummy routines when no http support. */
-+int
-+http_get(const char *server, char *buf, size_t count, off_t offset)
-+{
-+ printf("error opening %s\n",server);
-+ exit(-1);
-+}
-+#endif
-+
-+#define check_action() (fp ? ACT_IDLE : ACT_WEBS_UPGRADE)
-+
-+#endif
-+
- /*
- * Open an MTD device
- * @param mtd path to or partition name of MTD device
-diff -bBurN WRT54G/release/src/router/shared/Makefile-openwrt WRT54G.new/release/src/router/shared/Makefile-openwrt
---- WRT54G/release/src/router/shared/Makefile-openwrt 1969-12-31 18:00:00.000000000 -0600
-+++ WRT54G.new/release/src/router/shared/Makefile-openwrt 2004-03-03 12:39:17.000000000 -0600
-@@ -0,0 +1,41 @@
-+#
-+# Linux router shared code Makefile
-+#
-+# Copyright 2001-2003, Broadcom Corporation
-+# All Rights Reserved.
-+#
-+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+#
-+# $Id: Makefile,v 1.3 2004/01/13 00:51:09 mbm Exp $
-+#
-+ifneq ($(wildcard $(SRCBASE)/cy_conf.mak),)
-+ include $(SRCBASE)/cy_conf.mak
-+endif
-+
-+CFLAGS += -I. -I$(SRCBASE)/include -Wall -I$(SRCBASE)/
-+#CFLAGS += -g -DDEBUG
-+CFLAGS += -s -Os
-+LDFLAGS += -L.
-+
-+all: libshared.so
-+
-+install: all
-+ install -d $(INSTALLDIR)/usr/lib
-+ install -m 755 libshared.so $(INSTALLDIR)/usr/lib
-+ $(STRIP) $(INSTALLDIR)/usr/lib/libshared.so
-+
-+clean:
-+ rm -f *.o *.so
-+
-+libshared.so: shutils.o wl.o wl_linux.o defaults.o linux_timer.o
-+ $(LD) -shared -o $@ $^
-+
-+build_date.o: build_date.c
-+
-+build_date:
-+ echo "const char *builddate = \"`date`\";" > build_date.c
-+
-+*.o: $(CY_DEPS)
-diff -bBurN WRT54GS/release/src/router/nvram/nvram_linux.c-dist WRT54GS.new/release/src/router/nvram/nvram_linux.c
---- WRT54GS/release/src/router/nvram/nvram_linux.c-dist 2004-03-30 10:04:10.000000000 -0600
-+++ WRT54GS/release/src/router/nvram/nvram_linux.c 2004-03-30 10:10:09.000000000 -0600
-@@ -27,8 +27,10 @@
- #include <typedefs.h>
- #include <bcmnvram.h>
- #include <nvram_convert.h>
-+#ifndef OPENWRT_NVRAM
- #include <shutils.h>
- #include <utils.h>
-+#endif
-
- #define PATH_DEV_NVRAM "/dev/nvram"
-
-@@ -182,6 +184,20 @@
- {
- int ret;
-
-+#ifdef OPENWRT_NVRAM
-+ fprintf(stderr, "nvram_commit(): start\n");
-+
-+ if (nvram_fd < 0)
-+ if ((ret = nvram_init(NULL)))
-+ return ret;
-+
-+ ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL);
-+
-+ if (ret < 0)
-+ perror(PATH_DEV_NVRAM);
-+
-+ fprintf(stderr, "nvram_commit(): end\n");
-+#else
- cprintf("nvram_commit(): start\n");
-
- if((check_action() == ACT_IDLE) ||
-@@ -200,6 +216,7 @@
- }
- else
- cprintf("nvram_commit(): nothing to do...\n");
-+#endif
-
- return ret;
- }
-@@ -272,6 +289,7 @@
- return j;
- }
-
-+#ifndef OPENWRT_NVRAM
- int
- check_action(void)
- {
-@@ -318,3 +336,5 @@
-
- return 0;
- }
-+
-+#endif
+++ /dev/null
---- WRT54G/release/src/shared/sbpci.c-dist 2004-03-15 13:13:37.000000000 -0600
-+++ WRT54G/release/src/shared/sbpci.c 2004-03-15 13:15:38.000000000 -0600
-@@ -269,7 +269,7 @@
- sb_core_reset(sbh, 0);
-
- /* In some board, */
-- if(nvram_match("boardtype", "bcm94710dev"))
-+ if(nvram_match("boardtype", "bcm94710dev") || nvram_match("boardtype", "bcm94710ap") || nvram_match("boardtype", "bcm94710r4"))
- CT4712_WR = 0;
- else
- CT4712_WR = 1;
+++ /dev/null
-#!/bin/sh
-# $Id$
-
-
-[ -f "/tmp/.firstboot" ] && {
- echo "firstboot is already running"
- return
-}
-touch /tmp/.firstboot
-
-jdev=$(mount | awk '/jffs2/ {print $3}')
-
-if [ -z "$jdev" ]; then
- echo -n "Creating jffs2 partition... "
- mtd erase OpenWrt >&-
- mount -t jffs2 /dev/mtdblock/4 /jffs
- echo "done"
- cd /jffs
-else
- echo "firstboot has already been run"
- echo "jffs2 partition is mounted, only resetting files"
- cd $jdev
-fi
-
-exec 2>/dev/null
-
-mount /dev/mtdblock/2 /rom -o ro
-
-echo -n "creating directories... "
-{
- cd /rom
- find . -type d
- cd -
-} | xargs mkdir
-echo "done"
-
-echo -n "setting up symlinks... "
-for file in $(cd /rom; find * -type f; find * -type l;)
-do {
- ln -sf /rom/$file $file
-} done
-echo "done"
-
-touch /tmp/resolv.conf
-ln -s /tmp/resolv.conf /etc/resolv.conf
-
-umount /rom
-mount none /jffs/proc -t proc
-pivot_root /jffs /jffs/rom
-mount none /dev -t devfs
-mount none /tmp -t ramfs
-umount /rom/proc
-umount /rom/tmp
-umount /rom/dev
+++ /dev/null
-#!/bin/sh
-# ipkg - the itsy package management system
-#
-# Copyright (C) 2001 Carl D. Worth
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-set -e
-
-# By default do not do globbing. Any command wanting globbing should
-# explicitly enable it first and disable it afterwards.
-set -o noglob
-
-ipkg_is_upgrade () {
- local A B a b
- A=$(echo $1 | sed "s/[0-9]*/ & /g")
- B=$(echo $2 | sed "s/[0-9]*/ & /g")
- while [ \! -z "$A" ] && [ \! -z "$B" ]; do {
- set $A; a=$1; shift; A=$*
- set $B; b=$1; shift; B=$*
- { [ "$a" -gt "$b" ] 2>&- || [ "$a" ">" "$b" ]; } && { return 0; }
- }; done
- return 1;
-}
-
-ipkg_srcs() {
- local srcre="$1"
- sed -ne "s/^src[[:space:]]\+$srcre[[:space:]]\+//p" < $IPKG_CONF
-}
-
-ipkg_src_names() {
- sed -ne "s/^src[[:space:]]\+\([^[:space:]]\+\).*/\1/p" < $IPKG_CONF
-}
-
-ipkg_src_byname() {
- local src="$1"
- ipkg_srcs $src | head -1
-}
-
-ipkg_dests() {
- local destre="`echo $1 | ipkg_protect_slashes`"
- sed -ne "/^dest[[:space:]]\+$destre/{
-s/^dest[[:space:]]\+[^[:space:]]\+[[:space:]]\+//
-s/^/`echo $IPKG_OFFLINE_ROOT | ipkg_protect_slashes`/
-p
-}" < $IPKG_CONF
-}
-
-ipkg_dest_names() {
- sed -ne "s/^dest[[:space:]]\+\([^[:space:]]\+\).*/\1/p" < $IPKG_CONF
-}
-
-ipkg_dests_all() {
- ipkg_dests '.*'
-}
-
-ipkg_state_dirs() {
- ipkg_dests_all | sed "s|\$|/$IPKG_DIR_PREFIX|"
-}
-
-ipkg_dest_default() {
- ipkg_dests_all | head -1
-}
-
-ipkg_dest_default_name() {
- ipkg_dest_names | head -1
-}
-
-ipkg_dest_byname() {
- local dest="$1"
- ipkg_dests $dest | head -1
-}
-
-ipkg_option() {
- local option="$1"
- sed -ne "s/^option[[:space:]]\+$option[[:space:]]\+//p" < $IPKG_CONF
-}
-
-ipkg_load_configuration() {
- if [ -z "$IPKG_CONF_DIR" ]; then
- IPKG_CONF_DIR=/etc
- fi
-
- IPKG_CONF="$IPKG_CONF_DIR/ipkg.conf"
-
- if [ -z "$IPKG_OFFLINE_ROOT" ]; then
- IPKG_OFFLINE_ROOT="`ipkg_option offline_root`"
- fi
- # Export IPKG_OFFLINE_ROOT for use by update-alternatives
- export IPKG_OFFLINE_ROOT
- if [ -n "$DEST_NAME" ]; then
- IPKG_ROOT="`ipkg_dest_byname $DEST_NAME`"
- if [ -z "$IPKG_ROOT" ]; then
- if [ -d "$IPKG_OFFLINE_ROOT$DEST_NAME" ]; then
- IPKG_ROOT="$IPKG_OFFLINE_ROOT$DEST_NAME";
- else
- echo "ipkg: invalid destination specification: $DEST_NAME
-Valid destinations are directories or one of the dest names from $IPKG_CONF:" >&2
- ipkg_dest_names >&2
- return 1
- fi
- fi
- else
- IPKG_ROOT="`ipkg_dest_default`"
- fi
-
- # Global ipkg state directories
- IPKG_DIR_PREFIX=usr/lib/ipkg
- IPKG_LISTS_DIR=$IPKG_OFFLINE_ROOT/$IPKG_DIR_PREFIX/lists
- IPKG_PENDING_DIR=$IPKG_OFFLINE_ROOT/$IPKG_DIR_PREFIX/pending
- IPKG_TMP=$IPKG_ROOT/tmp/ipkg
-
- # Destination specific ipkg meta-data directory
- IPKG_STATE_DIR=$IPKG_ROOT/$IPKG_DIR_PREFIX
-
- # Proxy Support
- IPKG_PROXY_USERNAME="`ipkg_option proxy_username`"
- IPKG_PROXY_PASSWORD="`ipkg_option proxy_password`"
- IPKG_HTTP_PROXY="`ipkg_option http_proxy`"
- IPKG_FTP_PROXY="`ipkg_option ftp_proxy`"
- IPKG_NO_PROXY="`ipkg_option no_proxy`"
- if [ -n "$IPKG_HTTP_PROXY" ]; then
- export http_proxy="$IPKG_HTTP_PROXY"
- fi
-
- if [ -n "$IPKG_FTP_PROXY" ]; then
- export ftp_proxy="$IPKG_FTP_PROXY"
- fi
-
- if [ -n "$IPKG_NO_PROXY" ]; then
- export no_proxy="$IPKG_NO_PROXY"
- fi
-
- IPKG_STATUS_FIELDS='\(Package\|Status\|Essential\|Version\|Conffiles\|Root\)'
-}
-
-ipkg_usage() {
- [ $# -gt 0 ] && echo "ipkg: $*"
- echo "
-usage: ipkg [options...] sub-command [arguments...]
-where sub-command is one of:
-
-Package Manipulation:
- update Update list of available packages
- upgrade Upgrade all installed packages to latest version
- install <pkg> Download and install <pkg> (and dependencies)
- install <file.ipk> Install package <file.ipk>
- install <file.deb> Install package <file.deb>
- remove <pkg> Remove package <pkg>
-
-Informational Commands:
- list List available packages and descriptions
- files <pkg> List all files belonging to <pkg>
- search <file> Search for a packaging providing <file>
- info [pkg [<field>]] Display all/some info fields for <pkg> or all
- status [pkg [<field>]] Display all/some status fields for <pkg> or all
- depends <pkg> Print uninstalled package dependencies for <pkg>
-
-Options:
- -d <dest_name> Use <dest_name> as the the root directory for
- -dest <dest_name> package installation, removal, upgrading.
- <dest_name> should be a defined dest name from the
- configuration file, (but can also be a directory
- name in a pinch).
- -o <offline_root> Use <offline_root> as the root for offline installation.
- -offline <offline_root>
-
-Force Options (use when ipkg is too smart for its own good):
- -force-depends Make dependency checks warnings instead of errors
- -force-defaults Use default options for questions asked by ipkg.
- (no prompts). Note that this will not prevent
- package installation scripts from prompting.
-" >&2
- exit 1
-}
-
-ipkg_dir_part() {
- local dir="`echo $1 | sed -ne 's/\(.*\/\).*/\1/p'`"
- if [ -z "$dir" ]; then
- dir="./"
- fi
- echo $dir
-}
-
-ipkg_file_part() {
- echo $1 | sed 's/.*\///'
-}
-
-ipkg_protect_slashes() {
- sed -e 's/\//\\\//g'
-}
-
-ipkg_download() {
- local src="$1"
- local dest="$2"
-
- local src_file="`ipkg_file_part $src`"
- local dest_dir="`ipkg_dir_part $dest`"
- if [ -z "$dest_dir" ]; then
- dest_dir="$IPKG_TMP"
- fi
-
- local dest_file="`ipkg_file_part $dest`"
- if [ -z "$dest_file" ]; then
- dest_file="$src_file"
- fi
-
- # Proxy support
- local proxyuser=""
- local proxypassword=""
- local proxyoption=""
-
- if [ -n "$IPKG_PROXY_USERNAME" ]; then
- proxyuser="--proxy-user=\"$IPKG_PROXY_USERNAME\""
- proxypassword="--proxy-passwd=\"$IPKG_PROXY_PASSWORD\""
- fi
-
- if [ -n "$IPKG_PROXY_HTTP" -o -n "$IPKG_PROXY_FTP" ]; then
- proxyoption="--proxy=on"
- fi
-
- echo "Downloading $src ..."
- rm -f $IPKG_TMP/$src_file
- case "$src" in
- http://* | ftp://*)
- if ! wget --passive-ftp $proxyoption $proxyuser $proxypassword -P $IPKG_TMP $src; then
- echo "ipkg_download: ERROR: Failed to retrieve $src, returning $err"
- return 1
- fi
- mv $IPKG_TMP/$src_file $dest_dir/$dest_file 2>/dev/null
- ;;
- file:/* )
- ln -s `echo $src | sed 's/^file://'` $dest_dir/$dest_file 2>/dev/null
- ;;
- *)
- echo "DEBUG: $src"
- ;;
- esac
-
- echo "Done."
- return 0
-}
-
-ipkg_update() {
- if [ ! -e "$IPKG_LISTS_DIR" ]; then
- mkdir -p $IPKG_LISTS_DIR
- fi
-
- local err=
- for src_name in `ipkg_src_names`; do
- local src="`ipkg_src_byname $src_name`"
- if ! ipkg_download $src/Packages $IPKG_LISTS_DIR/$src_name; then
- echo "ipkg_update: Error downloading $src/Packages to $IPKG_LISTS_DIR/$src_name" >&2
- err=t
- else
- echo "Updated list of available packages in $IPKG_LISTS_DIR/$src_name"
- fi
- done
-
- [ -n "$err" ] && return 1
-
- return 0
-}
-
-ipkg_list() {
- for src in `ipkg_src_names`; do
- if ipkg_require_list $src; then
-# black magic...
-sed -ne "
-/^Package:/{
-s/^Package:[[:space:]]*\<\([a-z0-9.+-]*$1[a-z0-9.+-]*\).*/\1/
-h
-}
-/^Description:/{
-s/^Description:[[:space:]]*\(.*\)/\1/
-H
-g
-s/\\
-/ - /
-p
-}
-" $IPKG_LISTS_DIR/$src
- fi
- done
-}
-
-ipkg_extract_paragraph() {
- local pkg="$1"
- sed -ne "/Package:[[:space:]]*$pkg[[:space:]]*\$/,/^\$/p"
-}
-
-ipkg_extract_field() {
- local field="$1"
-# blacker magic...
- sed -ne "
-: TOP
-/^$field:/{
-p
-n
-b FIELD
-}
-d
-: FIELD
-/^$/b TOP
-/^[^[:space:]]/b TOP
-p
-n
-b FIELD
-"
-}
-
-ipkg_extract_value() {
- sed -e "s/^[^:]*:[[:space:]]*//"
-}
-
-ipkg_require_list() {
- [ $# -lt 1 ] && return 1
- local src="$1"
- if [ ! -f "$IPKG_LISTS_DIR/$src" ]; then
- echo "ERROR: File not found: $IPKG_LISTS_DIR/$src" >&2
- echo " You probably want to run \`ipkg update'" >&2
- return 1
- fi
- return 0
-}
-
-ipkg_info() {
- for src in `ipkg_src_names`; do
- if ipkg_require_list $src; then
- case $# in
- 0)
- cat $IPKG_LISTS_DIR/$src
- ;;
- 1)
- ipkg_extract_paragraph $1 < $IPKG_LISTS_DIR/$src
- ;;
- *)
- ipkg_extract_paragraph $1 < $IPKG_LISTS_DIR/$src | ipkg_extract_field $2
- ;;
- esac
- fi
- done
-}
-
-ipkg_status_sd() {
- [ $# -lt 1 ] && return 0
- sd="$1"
- shift
- if [ -f $sd/status ]; then
- case $# in
- 0)
- cat $sd/status
- ;;
- 1)
- ipkg_extract_paragraph $1 < $sd/status
- ;;
- *)
- ipkg_extract_paragraph $1 < $sd/status | ipkg_extract_field $2
- ;;
- esac
- fi
- return 0
-}
-
-ipkg_status_all() {
- for sd in `ipkg_state_dirs`; do
- ipkg_status_sd $sd $*
- done
-}
-
-ipkg_status() {
- if [ -n "$DEST_NAME" ]; then
- ipkg_status_sd $IPKG_STATE_DIR $*
- else
- ipkg_status_all $*
- fi
-}
-
-ipkg_status_matching_sd() {
- local sd="$1"
- local re="$2"
- if [ -f $sd/status ]; then
- sed -ne "
-: TOP
-/^Package:/{
-s/^Package:[[:space:]]*//
-s/[[:space:]]*$//
-h
-}
-/$re/{
-g
-p
-b NEXT
-}
-d
-: NEXT
-/^$/b TOP
-n
-b NEXT
-" < $sd/status
- fi
- return 0
-}
-
-ipkg_status_matching_all() {
- for sd in `ipkg_state_dirs`; do
- ipkg_status_matching_sd $sd $*
- done
-}
-
-ipkg_status_matching() {
- if [ -n "$DEST_NAME" ]; then
- ipkg_status_matching_sd $IPKG_STATE_DIR $*
- else
- ipkg_status_matching_all $*
- fi
-}
-
-ipkg_status_installed_sd() {
- local sd="$1"
- local pkg="$2"
- ipkg_status_sd $sd $pkg Status | grep -q "Status: install ok installed"
-}
-
-ipkg_status_installed_all() {
- local ret=1
- for sd in `ipkg_state_dirs`; do
- if `ipkg_status_installed_sd $sd $*`; then
- ret=0
- fi
- done
- return $ret
-}
-
-ipkg_status_mentioned_sd() {
- local sd="$1"
- local pkg="$2"
- [ -n "`ipkg_status_sd $sd $pkg Status`" ]
-}
-
-ipkg_files() {
- local pkg="$1"
- if [ -n "$DEST_NAME" ]; then
- dests=$IPKG_ROOT
- else
- dests="`ipkg_dests_all`"
- fi
- for dest in $dests; do
- if [ -f $dest/$IPKG_DIR_PREFIX/info/$pkg.list ]; then
- dest_sed="`echo $dest | ipkg_protect_slashes`"
- sed -e "s/^/$dest_sed/" < $dest/$IPKG_DIR_PREFIX/info/$pkg.list
- fi
- done
-}
-
-ipkg_search() {
- local pattern="$1"
-
- for dest_name in `ipkg_dest_names`; do
- dest="`ipkg_dest_byname $dest_name`"
- dest_sed="`echo $dest | ipkg_protect_slashes`"
-
- set +o noglob
- local list_files="`ls -1 $dest/$IPKG_DIR_PREFIX/info/*.list 2>/dev/null`"
- set -o noglob
- for file in $list_files; do
- if sed "s/^/$dest_sed/" $file | grep -q $pattern; then
- local pkg="`echo $file | sed "s/^.*\/\(.*\)\.list/\1/"`"
- [ "$dest_name" != `ipkg_dest_default_name` ] && pkg="$pkg ($dest_name)"
- sed "s/^/$dest_sed/" $file | grep $pattern | sed "s/^/$pkg: /"
- fi
- done
- done
-}
-
-ipkg_status_remove_sd() {
- local sd="$1"
- local pkg="$2"
-
- if [ ! -f $sd/status ]; then
- mkdir -p $sd
- touch $sd/status
- fi
- sed -ne "/Package:[[:space:]]*$pkg[[:space:]]*\$/,/^\$/!p" < $sd/status > $sd/status.new
- mv $sd/status.new $sd/status
-}
-
-ipkg_status_remove_all() {
- for sd in `ipkg_state_dirs`; do
- ipkg_status_remove_sd $sd $*
- done
-}
-
-ipkg_status_remove() {
- if [ -n "$DEST_NAME" ]; then
- ipkg_status_remove_sd $IPKG_STATE_DIR $*
- else
- ipkg_status_remove_all $*
- fi
-}
-
-ipkg_status_update_sd() {
- local sd="$1"
- local pkg="$2"
-
- ipkg_status_remove_sd $sd $pkg
- ipkg_extract_field "$IPKG_STATUS_FIELDS" >> $sd/status
- echo "" >> $sd/status
-}
-
-ipkg_status_update() {
- ipkg_status_update_sd $IPKG_STATE_DIR $*
-}
-
-ipkg_unsatisfied_dependences() {
- local pkg=$1
- local deps="`ipkg_get_depends $pkg`"
- local remaining_deps=
- for dep in $deps; do
- local installed="`ipkg_get_installed $dep`"
- if [ "$installed" != "installed" ] ; then
- remaining_deps="$remaining_deps $dep"
- fi
- done
- ## echo "ipkg_unsatisfied_dependences pkg=$pkg $remaining_deps" > /dev/console
- echo $remaining_deps
-}
-
-ipkg_safe_pkg_name() {
- local pkg=$1
- local spkg="`echo pkg_$pkg | sed -e y/-+./___/`"
- echo $spkg
-}
-
-ipkg_set_depends() {
- local pkg=$1; shift
- local new_deps="$*"
- pkg="`ipkg_safe_pkg_name $pkg`"
- ## setvar ${pkg}_depends "$new_deps"
- echo $new_deps > /tmp/ipkg/${pkg}.depends
-}
-
-ipkg_get_depends() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- cat /tmp/ipkg/${pkg}.depends
- ## eval "echo \$${pkg}_depends"
-}
-
-ipkg_set_installed() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- echo installed > /tmp/ipkg/${pkg}.installed
- ## setvar ${pkg}_installed "installed"
-}
-
-ipkg_set_uninstalled() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- ### echo ipkg_set_uninstalled $pkg > /dev/console
- echo uninstalled > /tmp/ipkg/${pkg}.installed
- ## setvar ${pkg}_installed "uninstalled"
-}
-
-ipkg_get_installed() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- if [ -f /tmp/ipkg/${pkg}.installed ]; then
- cat /tmp/ipkg/${pkg}.installed
- fi
- ## eval "echo \$${pkg}_installed"
-}
-
-ipkg_depends() {
- local new_pkgs="$*"
- local all_deps=
- local installed_pkgs="`ipkg_status_matching_all 'Status:.*[[:space:]]installed'`"
- for pkg in $installed_pkgs; do
- ipkg_set_installed $pkg
- done
- while [ -n "$new_pkgs" ]; do
- all_deps="$all_deps $new_pkgs"
- local new_deps=
- for pkg in $new_pkgs; do
- if echo $pkg | grep -q '[^a-z0-9.+-]'; then
- echo "ipkg_depends: ERROR: Package name $pkg contains illegal characters (should be [a-z0-9.+-])" >&2
- return 1
- fi
- # TODO: Fix this. For now I am ignoring versions and alternations in dependencies.
- new_deps="$new_deps "`ipkg_info $pkg '\(Pre-\)\?Depends' | ipkg_extract_value | sed -e 's/([^)]*)//g
-s/\(|[[:space:]]*[a-z0-9.+-]\+[[:space:]]*\)\+//g
-s/,/ /g
-s/ \+/ /g'`
- ipkg_set_depends $pkg $new_deps
- done
-
- new_deps=`echo $new_deps | sed -e 's/[[:space:]]\+/\\
-/g' | sort | uniq`
-
- local maybe_new_pkgs=
- for pkg in $new_deps; do
- if ! echo $installed_pkgs | grep -q "\<$pkg\>"; then
- maybe_new_pkgs="$maybe_new_pkgs $pkg"
- fi
- done
-
- new_pkgs=
- for pkg in $maybe_new_pkgs; do
- if ! echo $all_deps | grep -q "\<$pkg\>"; then
- if [ -z "`ipkg_info $pkg`" ]; then
- echo "ipkg_depends: Warning: $pkg mentioned in dependency but no package found in $IPKG_LISTS_DIR" >&2
- ipkg_set_installed $pkg
- else
- new_pkgs="$new_pkgs $pkg"
- ipkg_set_uninstalled $pkg
- fi
- else
- ipkg_set_uninstalled $pkg
- fi
- done
- done
-
- echo $all_deps
-}
-
-ipkg_get_install_dest() {
- local dest="$1"
- shift
- local sd=$dest/$IPKG_DIR_PREFIX
- local info_dir=$sd/info
-
- local requested_pkgs="$*"
- local pkgs="`ipkg_depends $*`"
-
- mkdir -p $info_dir
- for pkg in $pkgs; do
- if ! ipkg_status_mentioned_sd $sd $pkg; then
- echo "Package: $pkg
-Status: install ok not-installed" | ipkg_status_update_sd $sd $pkg
- fi
- done
- ## mark the packages that we were directly requested to install as uninstalled
- for pkg in $requested_pkgs; do ipkg_set_uninstalled $pkg; done
-
- local new_pkgs=
- local pkgs_installed=0
- while [ -n "pkgs" ]; do
- curcheck=0
- ## echo "pkgs to install: {$pkgs}" > /dev/console
- for pkg in $pkgs; do
- curcheck="`expr $curcheck + 1`"
- local is_installed="`ipkg_get_installed $pkg`"
- if [ "$is_installed" = "installed" ]; then
- echo "$pkg is installed" > /dev/console
- continue
- fi
-
- local remaining_deps="`ipkg_unsatisfied_dependences $pkg`"
- if [ -n "$remaining_deps" ]; then
- new_pkgs="$new_pkgs $pkg"
- ### echo "Dependences not satisfied for $pkg: $remaining_deps"
- if [ $curcheck -ne `echo $pkgs|wc -w` ]; then
- continue
- fi
- fi
-
- local filename=
- for src in `ipkg_src_names`; do
- if ipkg_require_list $src; then
- filename="`ipkg_extract_paragraph $pkg < $IPKG_LISTS_DIR/$src | ipkg_extract_field Filename | ipkg_extract_value`"
- [ -n "$filename" ] && break
- fi
- done
-
- if [ -z "$filename" ]; then
- echo "ipkg_get_install: ERROR: Cannot find package $pkg in $IPKG_LISTS_DIR"
- echo "ipkg_get_install: Check the spelling and maybe run \`ipkg update'."
- ipkg_status_remove_sd $sd $pkg
- return 1;
- fi
-
- [ -e "$IPKG_TMP" ] || mkdir -p $IPKG_TMP
-
- echo ""
- local tmp_pkg_file="$IPKG_TMP/"`ipkg_file_part $filename`
- if ! ipkg_download `ipkg_src_byname $src`/$filename $tmp_pkg_file; then
- echo "ipkg_get_install: Perhaps you need to run \`ipkg update'?"
- return 1
- fi
-
- if ! ipkg_install_file_dest $dest $tmp_pkg_file; then
- echo "ipkg_get_install: ERROR: Failed to install $tmp_pkg_file"
- echo "ipkg_get_install: I'll leave it there for you to try a manual installation"
- return 1
- fi
-
- ipkg_set_installed $pkg
- pkgs_installed="`expr $pkgs_installed + 1`"
- rm $tmp_pkg_file
- done
- ### echo "Installed $pkgs_installed package(s) this round"
- if [ $pkgs_installed -eq 0 ]; then
- if [ -z "$new_pkgs" ]; then
- break
- fi
- fi
- pkgs_installed=0
- pkgs="$new_pkgs"
- new_pkgs=
- curcheck=0
- done
-}
-
-ipkg_get_install() {
- ipkg_get_install_dest $IPKG_ROOT $*
-}
-
-ipkg_install_file_dest() {
- local dest="$1"
- local filename="$2"
- local sd=$dest/$IPKG_DIR_PREFIX
- local info_dir=$sd/info
-
- if [ ! -f "$filename" ]; then
- echo "ipkg_install_file: ERROR: File $filename not found"
- return 1
- fi
-
- local pkg="`ipkg_file_part $filename | sed 's/\([a-z0-9.+-]\+\)_.*/\1/'`"
- local ext="`echo $filename | sed 's/.*\.//'`"
- local pkg_extract_stdout
- if [ "$ext" = "ipk" ]; then
- pkg_extract_stdout="tar -xzOf"
- elif [ "$ext" = "deb" ]; then
- pkg_extract_stdout="ar p"
- else
- echo "ipkg_install_file: ERROR: File $filename has unknown extension $ext (not .ipk or .deb)"
- return 1
- fi
-
- # Check dependencies
- local depends="`ipkg_depends $pkg | sed -e "s/\<$pkg\>//"`"
-
- # Don't worry about deps that are scheduled for installation
- local missing_deps=
- for dep in $depends; do
- if ! ipkg_status_all $dep | grep -q 'Status:[[:space:]]install'; then
- missing_deps="$missing_deps $dep"
- fi
- done
-
- if [ ! -z "$missing_deps" ]; then
- if [ -n "$FORCE_DEPENDS" ]; then
- echo "ipkg_install_file: Warning: $pkg depends on the following uninstalled programs: $missing_deps"
- else
- echo "ipkg_install_file: ERROR: $pkg depends on the following uninstalled programs:
- $missing_deps"
- echo "ipkg_install_file: You may want to use \`ipkg install' to install these."
- return 1
- fi
- fi
-
- mkdir -p $IPKG_TMP/$pkg/control
- mkdir -p $IPKG_TMP/$pkg/data
- mkdir -p $info_dir
-
- if ! $pkg_extract_stdout $filename ./control.tar.gz | (cd $IPKG_TMP/$pkg/control; tar -xzf - ) ; then
- echo "ipkg_install_file: ERROR unpacking control.tar.gz from $filename"
- return 1
- fi
-
- if [ -n "$IPKG_OFFLINE_ROOT" ]; then
- if grep -q '^InstallsOffline:[[:space:]]*no' $IPKG_TMP/$pkg/control/control; then
- echo "*** Warning: Package $pkg may not be installed in offline mode"
- echo "*** Warning: Scheduling $filename for pending installation (installing into $IPKG_PENDING_DIR)"
- echo "Package: $pkg
-Status: install ok pending" | ipkg_status_update_sd $sd $pkg
- mkdir -p $IPKG_PENDING_DIR
- cp $filename $IPKG_PENDING_DIR
- rm -r $IPKG_TMP/$pkg/control
- rm -r $IPKG_TMP/$pkg/data
- rmdir $IPKG_TMP/$pkg
- return 0
- fi
- fi
-
-
- echo -n "Unpacking $pkg..."
- set +o noglob
- for file in $IPKG_TMP/$pkg/control/*; do
- local base_file="`ipkg_file_part $file`"
- mv $file $info_dir/$pkg.$base_file
- done
- set -o noglob
- rm -r $IPKG_TMP/$pkg/control
-
- if ! $pkg_extract_stdout $filename ./data.tar.gz | (cd $IPKG_TMP/$pkg/data; tar -xzf - ) ; then
- echo "ipkg_install_file: ERROR unpacking data.tar.gz from $filename"
- return 1
- fi
- echo "Done."
-
- echo -n "Configuring $pkg..."
- export PKG_ROOT=$dest
- if [ -x "$info_dir/$pkg.preinst" ]; then
- if ! $info_dir/$pkg.preinst install; then
- echo "$info_dir/$pkg.preinst failed. Aborting installation of $pkg"
- rm -rf $IPKG_TMP/$pkg/data
- rmdir $IPKG_TMP/$pkg
- return 1
- fi
- fi
-
- local old_conffiles="`ipkg_status_sd $sd $pkg Conffiles | ipkg_extract_value`"
- local new_conffiles=
- if [ -f "$info_dir/$pkg.conffiles" ]; then
- for conffile in `cat $info_dir/$pkg.conffiles`; do
- if [ -f "$dest/$conffile" ] && ! echo " $old_conffiles " | grep -q " $conffile "`md5sum $dest/$conffile | sed 's/ .*//'`; then
- local use_maintainers_conffile=
- if [ -z "$FORCE_DEFAULTS" ]; then
- while true; do
- echo -n "Configuration file \`$conffile'
- ==> File on system created by you or by a script.
- ==> File also in package provided by package maintainer.
- What would you like to do about it ? Your options are:
- Y or I : install the package maintainer's version
- N or O : keep your currently-installed version
- D : show the differences between the versions (if diff is installed)
- The default action is to keep your current version.
-*** `ipkg_file_part $conffile` (Y/I/N/O/D) [default=N] ? "
- read response
- case "$response" in
- [YyIi] | [Yy][Ee][Ss])
- use_maintainers_conffile=t
- break
- ;;
- [Dd])
- echo "
-diff -u $dest/$conffile $IPKG_TMP/$pkg/data/$conffile"
- diff -u $dest/$conffile $IPKG_TMP/$pkg/data/$conffile || true
- echo "[Press ENTER to continue]"
- read junk
- ;;
- *)
- break
- ;;
- esac
- done
- fi
- if [ -n "$use_maintainers_conffile" ]; then
- local md5sum="`md5sum $IPKG_TMP/$pkg/data/$conffile | sed 's/ .*//'`"
- new_conffiles="$new_conffiles $conffile $md5sum"
- else
- new_conffiles="$new_conffiles $conffile <custom>"
- rm $IPKG_TMP/$pkg/data/$conffile
- fi
- else
- md5sum="`md5sum $IPKG_TMP/$pkg/data/$conffile | sed 's/ .*//'`"
- new_conffiles="$new_conffiles $conffile $md5sum"
- fi
- done
- fi
-
- local owd="`pwd`"
- (cd $IPKG_TMP/$pkg/data/; tar cf - . | (cd $owd; cd $dest; tar xf -))
- rm -rf $IPKG_TMP/$pkg/data
- rmdir $IPKG_TMP/$pkg
- $pkg_extract_stdout $filename ./data.tar.gz | tar tzf - | sed -e 's/^\.//' > $info_dir/$pkg.list
-
- if [ -x "$info_dir/$pkg.postinst" ]; then
- $info_dir/$pkg.postinst configure
- fi
-
- if [ -n "$new_conffiles" ]; then
- new_conffiles='Conffiles: '`echo $new_conffiles | ipkg_protect_slashes`
- fi
- local sed_safe_root="`echo $dest | sed -e "s/^${IPKG_OFFLINE_ROOT}//" | ipkg_protect_slashes`"
- sed -e "s/\(Package:.*\)/\1\\
-Status: install ok installed\\
-Root: ${sed_safe_root}\\
-${new_conffiles}/" $info_dir/$pkg.control | ipkg_status_update_sd $sd $pkg
-
- rm -f $info_dir/$pkg.control
- rm -f $info_dir/$pkg.conffiles
- rm -f $info_dir/$pkg.preinst
- rm -f $info_dir/$pkg.postinst
-
- echo "Done."
-}
-
-ipkg_install_file() {
- ipkg_install_file_dest $IPKG_ROOT $*
-}
-
-ipkg_install() {
-
- while [ $# -gt 0 ]; do
- local pkg="$1"
- shift
-
- case "$pkg" in
- http://* | ftp://*)
- local tmp_pkg_file="$IPKG_TMP/"`ipkg_file_part $pkg`
- if ipkg_download $pkg $tmp_pkg_file; then
- ipkg_install_file $tmp_pkg_file
- rm $tmp_pkg_file
- fi
- ;;
- file:/*.ipk | file://*.deb)
- local ipkg_filename="`echo $pkg|sed 's/^file://'`"
- ipkg_install_file $ipkg_filename
- ;;
- *.ipk | *.deb)
- if [ -f "$pkg" ]; then
- ipkg_install_file $pkg
- else
- echo "File not found $pkg" >&2
- fi
- ;;
- *)
- ipkg_get_install $pkg || true
- ;;
- esac
- done
-}
-
-ipkg_install_pending() {
- [ -n "$IPKG_OFFLINE_ROOT" ] && return 0
-
- if [ -d "$IPKG_PENDING_DIR" ]; then
- set +o noglob
- local pending="`ls -1d $IPKG_PENDING_DIR/*.ipk 2> /dev/null`" || true
- set -o noglob
- if [ -n "$pending" ]; then
- echo "The following packages in $IPKG_PENDING_DIR will now be installed:"
- echo $pending
- for filename in $pending; do
- if ipkg_install_file $filename; then
- rm $filename
- fi
- done
- fi
- fi
- return 0
-}
-
-ipkg_install_wanted() {
- local wanted="`ipkg_status_matching 'Status:[[:space:]]*install.*not-installed'`"
-
- if [ -n "$wanted" ]; then
- echo "The following package were previously requested but have not been installed:"
- echo $wanted
-
- if [ -n "$FORCE_DEFAULTS" ]; then
- echo "Installing them now."
- else
- echo -n "Install them now [Y/n] ? "
- read response
- case "$response" in
- [Nn] | [Nn][Oo])
- return 0
- ;;
- esac
- fi
-
- ipkg_install $wanted
- fi
-
- return 0
-}
-
-ipkg_upgrade_pkg() {
- local pkg="$1"
- local avail_ver="`ipkg_info $pkg Version | ipkg_extract_value | head -1`"
-
- is_installed=
- for dest_name in `ipkg_dest_names`; do
- local dest="`ipkg_dest_byname $dest_name`"
- local sd=$dest/$IPKG_DIR_PREFIX
- local inst_ver="`ipkg_status_sd $sd $pkg Version | ipkg_extract_value`"
- if [ -n "$inst_ver" ]; then
- is_installed=t
-
- if [ -z "$avail_ver" ]; then
- echo "Assuming locally installed package $pkg ($inst_ver) is up to date"
- return 0
- fi
-
- if [ "$avail_ver" = "$inst_ver" ]; then
- echo "Package $pkg ($inst_ver) installed in $dest_name is up to date"
- elif ipkg_is_upgrade "$avail_ver" "$inst_ver"; then
- echo "Upgrading $pkg ($dest_name) from $inst_ver to $avail_ver"
- ipkg_get_install_dest $dest $pkg
- else
- echo "Not downgrading package $pkg from $inst_ver to $avail_ver"
- fi
- fi
- done
-
- if [ -z "$is_installed" ]; then
- echo "Package $pkg does not appear to be installed"
- return 0
- fi
-
-}
-
-ipkg_upgrade() {
- if [ $# -lt 1 ]; then
- local pkgs="`ipkg_status_matching 'Status:.*[[:space:]]installed'`"
- else
- pkgs="$*"
- fi
-
- for pkg in $pkgs; do
- ipkg_upgrade_pkg $pkg
- done
-}
-
-ipkg_remove_pkg_dest() {
- local dest="$1"
- local pkg="$2"
- local sd=$dest/$IPKG_DIR_PREFIX
- local info_dir=$sd/info
-
- if ! ipkg_status_installed_sd $sd $pkg; then
- echo "ipkg_remove: Package $pkg does not appear to be installed in $dest"
- if ipkg_status_mentioned_sd $sd $pkg; then
- echo "Purging mention of $pkg from the ipkg database"
- ipkg_status_remove_sd $sd $pkg
- fi
- return 1
- fi
-
- echo "ipkg_remove: Removing $pkg... "
-
- local files="`cat $info_dir/$pkg.list`"
-
- export PKG_ROOT=$dest
- if [ -x "$info_dir/$pkg.prerm" ]; then
- $info_dir/$pkg.prerm remove
- fi
-
- local conffiles="`ipkg_status_sd $sd $pkg Conffiles | ipkg_extract_value`"
-
- local dirs_to_remove=
- for file in $files; do
- if [ -d "$dest/$file" ]; then
- dirs_to_remove="$dirs_to_remove $dest/$file"
- else
- if echo " $conffiles " | grep -q " $file "; then
- if echo " $conffiles " | grep -q " $file "`md5sum $dest/$file | sed 's/ .*//'`; then
- rm -f $dest/$file
- fi
- else
- rm -f $dest/$file
- fi
- fi
- done
-
- local removed_a_dir=t
- while [ -n "$removed_a_dir" ]; do
- removed_a_dir=
- local new_dirs_to_remove=
- for dir in $dirs_to_remove; do
- if rmdir $dir >/dev/null 2>&1; then
- removed_a_dir=t
- else
- new_dirs_to_remove="$new_dirs_to_remove $dir"
- fi
- done
- dirs_to_remove="$new_dirs_to_remove"
- done
-
- if [ -n "$dirs_to_remove" ]; then
- echo "ipkg_remove: Warning: Not removing the following directories since they are not empty:" >&2
- echo "$dirs_to_remove" | sed -e 's/\/[/]\+/\//g' >&2
- fi
-
- if [ -x "$info_dir/$pkg.postrm" ]; then
- $info_dir/$pkg.postrm remove
- fi
-
- ipkg_status_remove_sd $sd $pkg
- set +o noglob
- rm -f $info_dir/$pkg.*
- set -o noglob
-
- echo "Done."
-}
-
-ipkg_remove_pkg() {
- local pkg="$1"
- for dest in `ipkg_dests_all`; do
- local sd=$dest/$IPKG_DIR_PREFIX
- if ipkg_status_mentioned_sd $sd $pkg; then
- ipkg_remove_pkg_dest $dest $pkg
- fi
- done
-}
-
-ipkg_remove() {
- while [ $# -gt 0 ]; do
- local pkg="$1"
- shift
- if [ -n "$DEST_NAME" ]; then
- ipkg_remove_pkg_dest $IPKG_ROOT $pkg
- else
- ipkg_remove_pkg $pkg
- fi
- done
-}
-
-###########
-# ipkg main
-###########
-
-# Parse options
-while [ $# -gt 0 ]; do
- arg="$1"
- case $arg in
- -d | -dest)
- [ $# -gt 1 ] || ipkg_usage "option $arg requires an argument"
- DEST_NAME="$2"
- shift
- ;;
- -o | -offline)
- [ $# -gt 1 ] || ipkg_usage "option $arg requires an argument"
- IPKG_OFFLINE_ROOT="$2"
- shift
- ;;
- -force-depends)
- FORCE_DEPENDS=t
- ;;
- -force-defaults)
- FORCE_DEFAULTS=t
- ;;
- -*)
- ipkg_usage "unknown option $arg"
- ;;
- *)
- break
- ;;
- esac
- shift
-done
-
-[ $# -lt 1 ] && ipkg_usage "ipkg must have one sub-command argument"
-cmd="$1"
-shift
-
-ipkg_load_configuration
-mkdir -p /tmp/ipkg
-
-case "$cmd" in
-update|upgrade|list|info|status|install_pending)
- ;;
-install|depends|remove|files|search)
- [ $# -lt 1 ] && ipkg_usage "ERROR: the \`\`$cmd'' command requires an argument"
- ;;
-*)
- echo "ERROR: unknown sub-command \`$cmd'"
- ipkg_usage
- ;;
-esac
-
-# Only install pending if we have an interactive sub-command
-case "$cmd" in
-upgrade|install)
- ipkg_install_pending
- ipkg_install_wanted
- ;;
-esac
-
-ipkg_$cmd $*
-for a in `ls $IPKG_TMP`; do
- rm -rf $IPKG_TMP/$a
-done
+++ /dev/null
-#!/bin/sh
-exec ash --login
+++ /dev/null
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
-
+++ /dev/null
-# filter what we send upstream
-domain-needed
-bogus-priv
-filterwin2k
-
-# allow /etc/hosts and dhcp lookups via *.lan
-local=/lan/
-domain=lan
-
-# no dhcp / dns queries from the wan
-except-interface=vlan1
-
-# enable dhcp (start,end,netmask,leasetime)
-dhcp-authoritative
-dhcp-range=192.168.1.100,192.168.1.250,255.255.255.0,12h
-dhcp-leasefile=/tmp/dhcp.leases
-
-# use /etc/ethers for static hosts; same format as --dhcp-host
-# <hwaddr> [<hostname>] <ipaddr>
-read-ethers
-
-# other useful options:
-# default route(s): dhcp-option=3,192.168.1.1,192.168.1.2
-# dns server(s): dhcp-option=6,192.168.1.1,192.168.1.2
+++ /dev/null
-#!/bin/ash
-
-alias debug=${DEBUG:-:}
-
-# allow env to override nvram
-nvram () {
- case $1 in
- get) eval "echo \${NVRAM_$2:-\$(command nvram get $2)}";;
- *) command nvram $*;;
- esac
-}
-. /etc/nvram.overrides
-
-# valid interface?
-if_valid () {
- ifconfig "$1" >&- 2>&- ||
- [ "${1%%[0-9]}" = "br" ] ||
- {
- [ "${1%%[0-9]}" = "vlan" ] && (
- i=${1#vlan}
- hwname=$(nvram get vlan${i}hwname)
- hwaddr=$(nvram get ${hwname}macaddr)
- [ -z "$hwaddr" ] && return 1
-
- vif=$(ifconfig -a | awk '/^eth.*'$hwaddr'/ {print $1; exit}' IGNORECASE=1)
- debug "# vlan$i => $vif"
-
- $DEBUG ifconfig $vif up
- $DEBUG vconfig add $vif $i 2>&-
- )
- } ||
- { echo -e "# $1 ignored: can't find/create"; false; }
-}
+++ /dev/null
-#!/bin/sh
-klogd
-syslogd -C 16
-sysctl -p
-echo "S" > /proc/jffs2_bbc
-
-mkdir -p /var/run
-
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
- # if default wifi mac, set two higher than the lan mac
- nvram set il0macaddr=$(nvram get et0macaddr|
- awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}
-
-insmod et
-insmod wl
-
-ifconfig lo 127.0.0.1 up
-ifconfig eth0 promisc
-
-HOSTNAME=$(nvram get wan_hostname)
-HOSTNAME=${HOSTNAME%%.*}
-echo ${HOSTNAME:=OpenWrt} > /proc/sys/kernel/hostname
-
-vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+++ /dev/null
-#!/bin/sh
-. /etc/functions.sh
-case "$1" in
- start|restart)
- ifup lan
- ifup wan
- ifup wifi
- wifi up
-
- for route in $(nvram get static_route); do {
- eval "set $(echo $route | sed 's/:/ /g')"
- $DEBUG route add -net $1 netmask $2 gw $3 metric $4 dev $5
- } done
- ;;
-esac
+++ /dev/null
-#!/bin/sh
-. /etc/functions.sh
-
-WAN=$(nvram get wan_ifname)
-
-IPT=/usr/sbin/iptables
-
-for T in filter nat mangle ; do
- $IPT -t $T -F
- $IPT -t $T -X
-done
-
-$IPT -t filter -A INPUT -m state --state INVALID -j DROP
-$IPT -t filter -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-$IPT -t filter -A INPUT -p icmp -j ACCEPT
-$IPT -t filter -A INPUT -i $WAN -p tcp -j REJECT --reject-with tcp-reset
-$IPT -t filter -A INPUT -i $WAN -j REJECT --reject-with icmp-port-unreachable
-$IPT -t filter -A FORWARD -m state --state INVALID -j DROP
-$IPT -t filter -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-$IPT -t filter -A FORWARD -i $WAN -m state --state NEW,INVALID -j DROP
-$IPT -t filter -A FORWARD -o $WAN -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-
-$IPT -t nat -A POSTROUTING -o $WAN -j MASQUERADE
+++ /dev/null
-#!/bin/sh
-/usr/sbin/dnsmasq
+++ /dev/null
-#!/bin/sh
-/usr/sbin/httpd -p 80 -h /www -r WRT54G Router
+++ /dev/null
-#!/bin/sh
-/usr/sbin/telnetd -l /bin/login
+++ /dev/null
-#!/bin/sh
-# automagically run firstboot
-[ -z "$FAILSAFE" ] && {
- { mount | grep jffs2 1>&-; } || firstboot
-}
-# set leds to normal state
-echo "0x00" > /proc/sys/diag
+++ /dev/null
-#!/bin/sh
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
- # Ignore dangling symlinks (if any).
- [ ! -f "$i" ] && continue
-
- case "$i" in
- *.sh)
- # Source shell script for speed.
- (
- trap - INT QUIT TSTP
- set start
- . $i
- )
- ;;
- *)
- # No sh extension, so fork subprocess.
- $i start
- ;;
- esac
-done
+++ /dev/null
-::sysinit:/etc/init.d/rcS
-::shutdown:/sbin/halt
-tts/0::askfirst:/bin/login
+++ /dev/null
-src openwrt http://openwrt.org/ipkg
-dest root /
-dest ram /tmp
+++ /dev/null
-# NVRAM overrides
-#
-# This file handles the NVRAM quirks of various hardware.
-# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
-
-# linksys bug; remove when not using static configuration for lan
-NVRAM_lan_proto="static"
-
-# hacks for wrt54g 1.x hardware
-[ "$(nvram get boardnum)" = "42" ] && \
-[ "$(nvram get boardtype)" = "bcm94710dev" ] && {
-
- # remap eth0 => vlan2, eth1 => vlan1
- # for all *_ifname(s)
-
- debug "### wrt54g 1.x hack ###"
- NVRAM_vlan1hwname="et0"
- NVRAM_vlan2hwname="et0"
- FAILSAFE_ifnames="vlan1 vlan2 eth2"
-
- remap () {
- eval NVRAM_$1=\"$(nvram get $1 | awk 'gsub("eth0","vlan2") gsub("eth1","vlan1")')\"
- }
-
- for type in lan wifi wan pppoe
- do
- remap ${type}_ifname
- remap ${type}_ifnames
- done
-}
-
-# hacks for wap54g hardware
-[ "$(nvram get boardnum)" = "2" ] || \
-[ "$(nvram get boardnum)" = "1024" ] && {
- debug "### wap54g hack ###"
- NVRAM_wan_ifname="none"
- FAILSAFE_ifnames="eth0 eth1"
-}
-
-# defaults if lan_ifname is missing
-[ -z "$(nvram get lan_ifname)" ] && {
- NVRAM_lan_ifname="br0"
- NVRAM_lan_ifnames="vlan0 vlan2 eth1 eth2 eth3"
-}
-
-# defaults if wan_ifname is missing
-[ -z "$(nvram get wan_ifname)" ] && {
- NVRAM_wan_ifname="vlan1"
- NVRAM_wan_proto="dhcp"
-}
-
-# failsafe if reset is held
-[ "$FAILSAFE" = "true" ] && {
- echo "### YOU ARE IN FAILSAFE MODE ####"
- NVRAM_lan_ifname="br0"
- NVRAM_lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1"}
- NVRAM_lan_ipaddr="192.168.1.1"
- NVRAM_lan_netmask="255.255.255.0"
- NVRAM_lan_hwaddr="00:0B:AD:0A:DD:00"
- NVRAM_wan_ifname="none"
- NVRAM_wifi_ifname="none"
-}
+++ /dev/null
-#!/bin/sh
-# executed from squashfs before init to
-# transfer root to the jffs2 partition
-mount none /proc -t proc
-insmod diag
-echo 0x01 > /proc/sys/diag
-sleep 1
-if [ $(cat /proc/sys/reset) = 1 ] ; then
- export FAILSAFE=true
- while :; do { echo $(((X=(X+1)%8)%2)) > /proc/sys/diag; sleep $((X==0)); } done &
-else
- mtd unlock mtd4
- mount -t jffs2 /dev/mtdblock/4 /jffs
- pivot_root /jffs /jffs/rom
- mount none /dev -t devfs
- mount none /proc -t proc
- umount rom/proc rom/dev
-fi
-mount none /tmp -t ramfs
-exec /sbin/init
+++ /dev/null
-#!/bin/sh
-[ -f /etc/banner ] && cat /etc/banner
-
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin
-export PS1='\u@\h:\w\$ '
-
-alias less=more
-alias vim=vi
-ldd() { LD_TRACE_LOADED_OBJECTS=1 $*; }
+++ /dev/null
-kernel.panic = 3
-net.ipv4.ip_forward = 1
-net.ipv4.icmp_echo_ignore_broadcasts = 1
-net.ipv4.icmp_ignore_bogus_error_responses = 1
-net.ipv4.tcp_fin_timeout = 30
-net.ipv4.tcp_keepalive_time = 120
-net.ipv4.tcp_timestamps = 0
+++ /dev/null
-After firstboot has been run, /rom will contain the previous (squashfs) root
-* except when booted failsafe -- echo $FAILSAFE
+++ /dev/null
-#!/bin/sh
-/usr/bin/killall5 -9
-umount -ar
+++ /dev/null
-#!/bin/ash
-# $Id$
-[ "${INTERFACE%%[0-9]*}" = "wds" ] && {
- [ -x "/usr/sbin/nas" ] && /usr/sbin/nas lan $INTERFACE up
- ifconfig $INTERFACE 0.0.0.0 up
- /usr/sbin/brctl addif br0 $INTERFACE
-}
+++ /dev/null
-#!/bin/ash
-. /etc/functions.sh
- type=$1
- debug "### ifdown $type ###"
- if=$(nvram get ${type}_ifname)
- if_valid $if || return
- kill $(cat /var/run/${if}.pid 2>&-) 2>&-
- $DEBUG ifconfig $if down
+++ /dev/null
-#!/bin/ash
-. /etc/functions.sh
- type=$1
- debug "### ifup $type ###"
-
- if=$(nvram get ${type}_ifname)
- if [ "${if%%[0-9]}" = "ppp" ]; then
- if=$(nvram get pppoe_ifname)
- fi
-
- if_valid $if || return
-
- $DEBUG ifconfig $if down
- if [ "${if%%[0-9]}" = "br" ]; then
- stp=$(nvram get ${type}_stp)
- $DEBUG brctl delbr $if
- $DEBUG brctl addbr $if
- $DEBUG brctl setfd $if 0
- $DEBUG brctl stp $if ${stp:-0}
- for sif in $(nvram get ${type}_ifnames); do {
- if_valid $sif || continue
- $DEBUG ifconfig $sif 0.0.0.0 up
- $DEBUG brctl addif $if $sif
- } done
- fi
-
- mac=$(nvram get ${type}_hwaddr)
- ${mac:+$DEBUG ifconfig $if hw ether $mac}
-
- if_proto=$(nvram get ${type}_proto)
- case "$if_proto" in
- static)
- ip=$(nvram get ${type}_ipaddr)
- netmask=$(nvram get ${type}_netmask)
- gateway=$(nvram get ${type}_gateway)
-
- $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
- ${gateway:+$DEBUG route add default gw $gateway}
-
- [ -f /etc/resolv.conf ] && return
-
- debug "# --- creating /etc/resolv.conf ---"
- for dns in $(nvram get ${type}_dns); do {
- echo "nameserver $dns" >> /etc/resolv.conf
- } done
- ;;
- dhcp)
- pidfile=/tmp/dhcp-${type}.pid
- if [ -f $pidfile ]; then
- $DEBUG kill $(cat $pidfile)
- fi
- ${DEBUG:-eval} "udhcpc -i $if -b -p $pidfile &"
- ;;
- pppoe)
- username=$(nvram get ppp_username)
- password=$(nvram get ppp_passwd)
- redial=$(nvram get ppp_redialperiod)
- idletime=$(nvram get ppp_idletime)
- mtu=$(nvram get wan_mtu)
-
- $DEBUG ifconfig $if 0.0.0.0 up
-
- $DEBUG /sbin/pppoecd $if -u $username -p $password \
- -i 0 -I $redial -T $idletime -t $mtu -k
- ;;
- none)
- ;;
- *)
- echo "### WARNING $if: $if_proto is not supported"
- ;;
- esac
+++ /dev/null
-#!/bin/ash
-alias debug=${DEBUG:-:}
-debug "### wifi $1 ###"
-if=$(awk 'sub(":","") {print $1}' /proc/net/wireless)
-$DEBUG wlconf $if $1
+++ /dev/null
-#!/bin/sh
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-# (slightly modified)
-
-[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
-
-RESOLV_CONF="/tmp/resolv.conf"
-
-case "$1" in
- deconfig)
- ifconfig $interface 0.0.0.0
- ;;
-
- renew|bound)
- ifconfig $interface $ip \
- ${broadcast:+broadcast $broadcast} \
- ${subnet:+netmask $subnet}
-
- if [ -n "$router" ] ; then
- echo "deleting routers"
- while route del default gw 0.0.0.0 dev $interface ; do
- :
- done
-
- for i in $router ; do
- route add default gw $i dev $interface
- done
- fi
-
- echo -n > $RESOLV_CONF
- ${domain:+echo search $domain >> $RESOLV_CONF}
- for i in $dns ; do
- echo adding dns $i
- echo nameserver $i >> $RESOLV_CONF
- done
- ;;
-esac
-exit 0
+++ /dev/null
-<HTML>
-<HEAD><TITLE>OpenWrt</TITLE></HEAD>
-<BODY>
-No webpages currently available
-<br>- perhaps you need to install a package?
-</BODY>
-</HTML>
+++ /dev/null
-/*
- * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* July 29, 2004
- *
- * This is a hacked replacement for the 'addpattern' utility used to
- * create wrt54g .bin firmware files. It isn't pretty, but it does
- * the job for me.
- *
- * Extensions:
- * -v allows setting the version string on the command line.
- * -{0|1} sets the (currently ignored) hw_ver flag in the header
- * to 0 or 1 respectively.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <sys/stat.h>
-
-/**********************************************************************/
-
-#define CODE_ID "U2ND" /* from code_pattern.h */
-#define CODE_PATTERN "W54S" /* from code_pattern.h */
-
-#define CYBERTAN_VERSION "v2.07.1" /* from cyutils.h */
-/* #define CYBERTAN_VERSION "v2.04.3" */
-
-struct code_header { /* from cyutils.h */
- char magic[4];
- char res1[4]; /* for extra magic */
- char fwdate[3];
- char fwvern[3];
- char id[4]; /* U2ND */
-#if 0
- unsigned char res2[14];
-#else
- char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */
- unsigned char res2[13];
-#endif
-} ;
-
-/**********************************************************************/
-
-void usage(void) __attribute__ (( __noreturn__ ));
-
-void usage(void)
-{
- fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-v v#.#.#] [-{0|1}]\n");
- exit(EXIT_FAILURE);
-}
-
-int main(int argc, char **argv)
-{
- char buf[1024]; /* keep this at 1k or adjust garbage calc below */
- struct code_header *hdr;
- FILE *in = stdin;
- FILE *out = stdout;
- char *ifn = NULL;
- char *ofn = NULL;
- char *pattern = CODE_PATTERN;
- char *version = CYBERTAN_VERSION;
- int gflag = 0;
- int c;
- int v0, v1, v2;
- size_t off, n;
- time_t t;
- struct tm *ptm;
-
- fprintf(stderr, "mjn3's addpattern replacement - v0.81\n");
-
- hdr = (struct code_header *) buf;
-
- while ((c = getopt(argc, argv, "i:o:p:gv:01")) != -1) {
- switch (c) {
- case 'i':
- ifn = optarg;
- break;
- case 'o':
- ofn = optarg;
- break;
- case 'p':
- pattern = optarg;
- break;
- case 'g':
- gflag = 1;
- break;
- case 'v': /* extension to allow setting version */
- version = optarg;
- break;
- case '0':
- hdr->hw_ver = 0;
- break;
- case '1':
- hdr->hw_ver = 1;
- break;
- default:
- usage();
- }
- }
-
- if (optind != argc) {
- fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]);
- usage();
- }
-
- if (strlen(pattern) != 4) {
- fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern);
- usage();
- }
-
- if (ifn && !(in = fopen(ifn, "r"))) {
- fprintf(stderr, "can not open \"%s\" for reading\n", ifn);
- usage();
- }
-
- if (ofn && !(out = fopen(ofn, "w"))) {
- fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
- usage();
- }
-
- if (time(&t) == (time_t)(-1)) {
- fprintf(stderr, "time call failed\n");
- return EXIT_FAILURE;
- }
-
- ptm = localtime(&t);
-
- if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) {
- fprintf(stderr, "bad version string \"%s\"\n", version);
- return EXIT_FAILURE;
- }
-
- memset(hdr, 0, sizeof(struct code_header));
- memcpy(&hdr->magic, pattern, 4);
- hdr->fwdate[0] = ptm->tm_year % 100;
- hdr->fwdate[1] = ptm->tm_mon + 1;
- hdr->fwdate[2] = ptm->tm_mday;
- hdr->fwvern[0] = v0;
- hdr->fwvern[1] = v1;
- hdr->fwvern[2] = v2;
- memcpy(&hdr->id, CODE_ID, strlen(CODE_ID));
-
- off = sizeof(struct code_header);
-
- fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n",
- v0, v1, v2,
- hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]);
-
-
- while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) {
- off = 0;
- if (n < sizeof(buf)) {
- if (ferror(in)) {
- FREAD_ERROR:
- fprintf(stderr, "fread error\n");
- return EXIT_FAILURE;
- }
- if (gflag) {
- gflag = sizeof(buf) - n;
- memset(buf + n, 0xff, gflag);
- fprintf(stderr, "adding %d bytes of garbage\n", gflag);
- n = sizeof(buf);
- }
- }
- if (!fwrite(buf, n, 1, out)) {
- FWRITE_ERROR:
- fprintf(stderr, "fwrite error\n");
- return EXIT_FAILURE;
- }
- }
-
- if (ferror(in)) {
- goto FREAD_ERROR;
- }
-
- if (fflush(out)) {
- goto FWRITE_ERROR;
- }
-
- fclose(in);
- fclose(out);
-
- return EXIT_SUCCESS;
-}
+++ /dev/null
-/* http://www.muppetlabs.com/~breadbox/software/elfkickers.html */
-
-/* sstrip: Copyright (C) 1999-2001 by Brian Raiter, under the GNU
- * General Public License. No warranty. See COPYING for details.
- *
- * Aug 23, 2004 Hacked by Manuel Novoa III <mjn3@codepoet.org> to
- * handle targets of different endianness and/or elf class, making
- * it more useful in a cross-devel environment.
- */
-
-/* ============== original README ===================
- *
- * sstrip is a small utility that removes the contents at the end of an
- * ELF file that are not part of the program's memory image.
- *
- * Most ELF executables are built with both a program header table and a
- * section header table. However, only the former is required in order
- * for the OS to load, link and execute a program. sstrip attempts to
- * extract the ELF header, the program header table, and its contents,
- * leaving everything else in the bit bucket. It can only remove parts of
- * the file that occur at the end, after the parts to be saved. However,
- * this almost always includes the section header table, and occasionally
- * a few random sections that are not used when running a program.
- *
- * It should be noted that the GNU bfd library is (understandably)
- * dependent on the section header table as an index to the file's
- * contents. Thus, an executable file that has no section header table
- * cannot be used with gdb, objdump, or any other program based upon the
- * bfd library, at all. In fact, the program will not even recognize the
- * file as a valid executable. (This limitation is noted in the source
- * code comments for bfd, and is marked "FIXME", so this may change at
- * some future date. However, I would imagine that it is a pretty
- * low-priority item, as executables without a section header table are
- * rare in the extreme.) This probably also explains why strip doesn't
- * offer the option to do this.
- *
- * Shared library files may also have their section header table removed.
- * Such a library will still function; however, it will no longer be
- * possible for a compiler to link a new program against it.
- *
- * As an added bonus, sstrip also tries to removes trailing zero bytes
- * from the end of the file. (This normally cannot be done with an
- * executable that has a section header table.)
- *
- * sstrip is a very simplistic program. It depends upon the common
- * practice of putting the parts of the file that contribute to the
- * memory image at the front, and the remaining material at the end. This
- * permits it to discard the latter material without affecting file
- * offsets and memory addresses in what remains. Of course, the ELF
- * standard permits files to be organized in almost any order, so if a
- * pathological linker decided to put its section headers at the top,
- * sstrip would be useless on such executables.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <elf.h>
-#ifdef __FreeBSD__
-/**
- * This seems to work on FreeBSD 5.3, should
- * work on all newer versions as well. I have
- * no idea if it will work on versions < 5.3
- *
- * Joe Estock (guru) <jestock at nutextonline.com>
- */
-#include <sys/endian.h>
-#define bswap_64 __bswap64
-#define bswap_32 __bswap32
-#define bswap_16 __bswap16
-#else
-#include <endian.h>
-#include <byteswap.h>
-#endif /* defined(__FreeBSD__) */
-
-
-#ifndef TRUE
-#define TRUE 1
-#define FALSE 0
-#endif
-
-/* The name of the program.
- */
-static char const *progname;
-
-/* The name of the current file.
- */
-static char const *filename;
-
-
-/* A simple error-handling function. FALSE is always returned for the
- * convenience of the caller.
- */
-static int err(char const *errmsg)
-{
- fprintf(stderr, "%s: %s: %s\n", progname, filename, errmsg);
- return FALSE;
-}
-
-/* A flag to signal the need for endian reversal.
- */
-static int do_reverse_endian;
-
-/* Get a value from the elf header, compensating for endianness.
- */
-#define EGET(X) \
- (__extension__ ({ \
- uint64_t __res; \
- if (!do_reverse_endian) { \
- __res = (X); \
- } else if (sizeof(X) == 1) { \
- __res = (X); \
- } else if (sizeof(X) == 2) { \
- __res = bswap_16((X)); \
- } else if (sizeof(X) == 4) { \
- __res = bswap_32((X)); \
- } else if (sizeof(X) == 8) { \
- __res = bswap_64((X)); \
- } else { \
- fprintf(stderr, "%s: %s: EGET failed for size %d\n", \
- progname, filename, sizeof(X)); \
- exit(EXIT_FAILURE); \
- } \
- __res; \
- }))
-
-/* Set a value 'Y' in the elf header to 'X', compensating for endianness.
- */
-#define ESET(Y,X) \
- do if (!do_reverse_endian) { \
- Y = (X); \
- } else if (sizeof(Y) == 1) { \
- Y = (X); \
- } else if (sizeof(Y) == 2) { \
- Y = bswap_16((uint16_t)(X)); \
- } else if (sizeof(Y) == 4) { \
- Y = bswap_32((uint32_t)(X)); \
- } else if (sizeof(Y) == 8) { \
- Y = bswap_64((uint64_t)(X)); \
- } else { \
- fprintf(stderr, "%s: %s: ESET failed for size %d\n", \
- progname, filename, sizeof(Y)); \
- exit(EXIT_FAILURE); \
- } while (0)
-
-
-/* A macro for I/O errors: The given error message is used only when
- * errno is not set.
- */
-#define ferr(msg) (err(errno ? strerror(errno) : (msg)))
-
-
-
-#define HEADER_FUNCTIONS(CLASS) \
- \
-/* readelfheader() reads the ELF header into our global variable, and \
- * checks to make sure that this is in fact a file that we should be \
- * munging. \
- */ \
-static int readelfheader ## CLASS (int fd, Elf ## CLASS ## _Ehdr *ehdr) \
-{ \
- if (read(fd, ((char *)ehdr)+EI_NIDENT, sizeof(*ehdr) - EI_NIDENT) \
- != sizeof(*ehdr) - EI_NIDENT) \
- return ferr("missing or incomplete ELF header."); \
- \
- /* Verify the sizes of the ELF header and the program segment \
- * header table entries. \
- */ \
- if (EGET(ehdr->e_ehsize) != sizeof(Elf ## CLASS ## _Ehdr)) \
- return err("unrecognized ELF header size."); \
- if (EGET(ehdr->e_phentsize) != sizeof(Elf ## CLASS ## _Phdr)) \
- return err("unrecognized program segment header size."); \
- \
- /* Finally, check the file type. \
- */ \
- if (EGET(ehdr->e_type) != ET_EXEC && EGET(ehdr->e_type) != ET_DYN) \
- return err("not an executable or shared-object library."); \
- \
- return TRUE; \
-} \
- \
-/* readphdrtable() loads the program segment header table into memory. \
- */ \
-static int readphdrtable ## CLASS (int fd, Elf ## CLASS ## _Ehdr const *ehdr, \
- Elf ## CLASS ## _Phdr **phdrs) \
-{ \
- size_t size; \
- \
- if (!EGET(ehdr->e_phoff) || !EGET(ehdr->e_phnum) \
-) return err("ELF file has no program header table."); \
- \
- size = EGET(ehdr->e_phnum) * sizeof **phdrs; \
- if (!(*phdrs = malloc(size))) \
- return err("Out of memory!"); \
- \
- errno = 0; \
- if (read(fd, *phdrs, size) != (ssize_t)size) \
- return ferr("missing or incomplete program segment header table."); \
- \
- return TRUE; \
-} \
- \
-/* getmemorysize() determines the offset of the last byte of the file \
- * that is referenced by an entry in the program segment header table. \
- * (Anything in the file after that point is not used when the program \
- * is executing, and thus can be safely discarded.) \
- */ \
-static int getmemorysize ## CLASS (Elf ## CLASS ## _Ehdr const *ehdr, \
- Elf ## CLASS ## _Phdr const *phdrs, \
- unsigned long *newsize) \
-{ \
- Elf ## CLASS ## _Phdr const *phdr; \
- unsigned long size, n; \
- int i; \
- \
- /* Start by setting the size to include the ELF header and the \
- * complete program segment header table. \
- */ \
- size = EGET(ehdr->e_phoff) + EGET(ehdr->e_phnum) * sizeof *phdrs; \
- if (size < sizeof *ehdr) \
- size = sizeof *ehdr; \
- \
- /* Then keep extending the size to include whatever data the \
- * program segment header table references. \
- */ \
- for (i = 0, phdr = phdrs ; i < EGET(ehdr->e_phnum) ; ++i, ++phdr) { \
- if (EGET(phdr->p_type) != PT_NULL) { \
- n = EGET(phdr->p_offset) + EGET(phdr->p_filesz); \
- if (n > size) \
- size = n; \
- } \
- } \
- \
- *newsize = size; \
- return TRUE; \
-} \
- \
-/* modifyheaders() removes references to the section header table if \
- * it was stripped, and reduces program header table entries that \
- * included truncated bytes at the end of the file. \
- */ \
-static int modifyheaders ## CLASS (Elf ## CLASS ## _Ehdr *ehdr, \
- Elf ## CLASS ## _Phdr *phdrs, \
- unsigned long newsize) \
-{ \
- Elf ## CLASS ## _Phdr *phdr; \
- int i; \
- \
- /* If the section header table is gone, then remove all references \
- * to it in the ELF header. \
- */ \
- if (EGET(ehdr->e_shoff) >= newsize) { \
- ESET(ehdr->e_shoff,0); \
- ESET(ehdr->e_shnum,0); \
- ESET(ehdr->e_shentsize,0); \
- ESET(ehdr->e_shstrndx,0); \
- } \
- \
- /* The program adjusts the file size of any segment that was \
- * truncated. The case of a segment being completely stripped out \
- * is handled separately. \
- */ \
- for (i = 0, phdr = phdrs ; i < EGET(ehdr->e_phnum) ; ++i, ++phdr) { \
- if (EGET(phdr->p_offset) >= newsize) { \
- ESET(phdr->p_offset,newsize); \
- ESET(phdr->p_filesz,0); \
- } else if (EGET(phdr->p_offset) + EGET(phdr->p_filesz) > newsize) { \
- newsize -= EGET(phdr->p_offset); \
- ESET(phdr->p_filesz, newsize); \
- } \
- } \
- \
- return TRUE; \
-} \
- \
-/* commitchanges() writes the new headers back to the original file \
- * and sets the file to its new size. \
- */ \
-static int commitchanges ## CLASS (int fd, Elf ## CLASS ## _Ehdr const *ehdr, \
- Elf ## CLASS ## _Phdr *phdrs, \
- unsigned long newsize) \
-{ \
- size_t n; \
- \
- /* Save the changes to the ELF header, if any. \
- */ \
- if (lseek(fd, 0, SEEK_SET)) \
- return ferr("could not rewind file"); \
- errno = 0; \
- if (write(fd, ehdr, sizeof *ehdr) != sizeof *ehdr) \
- return err("could not modify file"); \
- \
- /* Save the changes to the program segment header table, if any. \
- */ \
- if (lseek(fd, EGET(ehdr->e_phoff), SEEK_SET) == (off_t)-1) { \
- err("could not seek in file."); \
- goto warning; \
- } \
- n = EGET(ehdr->e_phnum) * sizeof *phdrs; \
- if (write(fd, phdrs, n) != (ssize_t)n) { \
- err("could not write to file"); \
- goto warning; \
- } \
- \
- /* Eleventh-hour sanity check: don't truncate before the end of \
- * the program segment header table. \
- */ \
- if (newsize < EGET(ehdr->e_phoff) + n) \
- newsize = EGET(ehdr->e_phoff) + n; \
- \
- /* Chop off the end of the file. \
- */ \
- if (ftruncate(fd, newsize)) { \
- err("could not resize file"); \
- goto warning; \
- } \
- \
- return TRUE; \
- \
- warning: \
- return err("ELF file may have been corrupted!"); \
-}
-
-
-/* First elements of Elf32_Ehdr and Elf64_Ehdr are common.
- */
-static int readelfheaderident(int fd, Elf32_Ehdr *ehdr)
-{
- errno = 0;
- if (read(fd, ehdr, EI_NIDENT) != EI_NIDENT)
- return ferr("missing or incomplete ELF header.");
-
- /* Check the ELF signature.
- */
- if (!(ehdr->e_ident[EI_MAG0] == ELFMAG0 &&
- ehdr->e_ident[EI_MAG1] == ELFMAG1 &&
- ehdr->e_ident[EI_MAG2] == ELFMAG2 &&
- ehdr->e_ident[EI_MAG3] == ELFMAG3))
- {
- err("missing ELF signature.");
- return -1;
- }
-
- /* Compare the file's class and endianness with the program's.
- */
-#if __BYTE_ORDER == __LITTLE_ENDIAN
- if (ehdr->e_ident[EI_DATA] == ELFDATA2LSB) {
- do_reverse_endian = 0;
- } else if (ehdr->e_ident[EI_DATA] == ELFDATA2MSB) {
-/* fprintf(stderr, "ELF file has different endianness.\n"); */
- do_reverse_endian = 1;
- }
-#elif __BYTE_ORDER == __BIG_ENDIAN
- if (ehdr->e_ident[EI_DATA] == ELFDATA2LSB) {
-/* fprintf(stderr, "ELF file has different endianness.\n"); */
- do_reverse_endian = 1;
- } else if (ehdr->e_ident[EI_DATA] == ELFDATA2MSB) {
- do_reverse_endian = 0;
- }
-#else
-#error unkown endianness
-#endif
- else {
- err("Unsupported endianness");
- return -1;
- }
-
- /* Check the target architecture.
- */
-/* if (EGET(ehdr->e_machine) != ELF_ARCH) { */
-/* /\* return err("ELF file created for different architecture."); *\/ */
-/* fprintf(stderr, "ELF file created for different architecture.\n"); */
-/* } */
- return ehdr->e_ident[EI_CLASS];
-}
-
-
-HEADER_FUNCTIONS(32)
-
-HEADER_FUNCTIONS(64)
-
-/* truncatezeros() examines the bytes at the end of the file's
- * size-to-be, and reduces the size to exclude any trailing zero
- * bytes.
- */
-static int truncatezeros(int fd, unsigned long *newsize)
-{
- unsigned char contents[1024];
- unsigned long size, n;
-
- size = *newsize;
- do {
- n = sizeof contents;
- if (n > size)
- n = size;
- if (lseek(fd, size - n, SEEK_SET) == (off_t)-1)
- return ferr("cannot seek in file.");
- if (read(fd, contents, n) != (ssize_t)n)
- return ferr("cannot read file contents");
- while (n && !contents[--n])
- --size;
- } while (size && !n);
-
- /* Sanity check.
- */
- if (!size)
- return err("ELF file is completely blank!");
-
- *newsize = size;
- return TRUE;
-}
-
-/* main() loops over the cmdline arguments, leaving all the real work
- * to the other functions.
- */
-int main(int argc, char *argv[])
-{
- int fd;
- union {
- Elf32_Ehdr ehdr32;
- Elf64_Ehdr ehdr64;
- } e;
- union {
- Elf32_Phdr *phdrs32;
- Elf64_Phdr *phdrs64;
- } p;
- unsigned long newsize;
- char **arg;
- int failures = 0;
-
- if (argc < 2 || argv[1][0] == '-') {
- printf("Usage: sstrip FILE...\n"
- "sstrip discards all nonessential bytes from an executable.\n\n"
- "Version 2.0-X Copyright (C) 2000,2001 Brian Raiter.\n"
- "Cross-devel hacks Copyright (C) 2004 Manuel Novoa III.\n"
- "This program is free software, licensed under the GNU\n"
- "General Public License. There is absolutely no warranty.\n");
- return EXIT_SUCCESS;
- }
-
- progname = argv[0];
-
- for (arg = argv + 1 ; *arg != NULL ; ++arg) {
- filename = *arg;
-
- fd = open(*arg, O_RDWR);
- if (fd < 0) {
- ferr("can't open");
- ++failures;
- continue;
- }
-
- switch (readelfheaderident(fd, &e.ehdr32)) {
- case ELFCLASS32:
- if (!(readelfheader32(fd, &e.ehdr32) &&
- readphdrtable32(fd, &e.ehdr32, &p.phdrs32) &&
- getmemorysize32(&e.ehdr32, p.phdrs32, &newsize) &&
- truncatezeros(fd, &newsize) &&
- modifyheaders32(&e.ehdr32, p.phdrs32, newsize) &&
- commitchanges32(fd, &e.ehdr32, p.phdrs32, newsize)))
- ++failures;
- break;
- case ELFCLASS64:
- if (!(readelfheader64(fd, &e.ehdr64) &&
- readphdrtable64(fd, &e.ehdr64, &p.phdrs64) &&
- getmemorysize64(&e.ehdr64, p.phdrs64, &newsize) &&
- truncatezeros(fd, &newsize) &&
- modifyheaders64(&e.ehdr64, p.phdrs64, newsize) &&
- commitchanges64(fd, &e.ehdr64, p.phdrs64, newsize)))
- ++failures;
- break;
- default:
- ++failures;
- break;
- }
- close(fd);
- }
-
- return failures ? EXIT_FAILURE : EXIT_SUCCESS;
-}
+++ /dev/null
-/*
- * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* July 29, 2004
- *
- * This is a hacked replacement for the 'trx' utility used to create
- * wrt54g .trx firmware files. It isn't pretty, but it does the job
- * for me.
- *
- * As an extension, you can specify a larger maximum length for the
- * .trx file using '-m'. It will be rounded up to be a multiple of 4K.
- * NOTE: This space will be malloc()'d.
- *
- * August 16, 2004
- *
- * Sigh... Make it endian-neutral.
- *
- * TODO: Support '-b' option to specify offsets for each file.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <endian.h>
-#include <byteswap.h>
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-#define STORE32_LE(X) bswap_32(X)
-#elif __BYTE_ORDER == __LITTLE_ENDIAN
-#define STORE32_LE(X) (X)
-#else
-#error unkown endianness!
-#endif
-
-uint32_t crc32buf(char *buf, size_t len);
-
-/**********************************************************************/
-/* from trxhdr.h */
-
-#define TRX_MAGIC 0x30524448 /* "HDR0" */
-#define TRX_VERSION 1
-#define TRX_MAX_LEN 0x3A0000
-#define TRX_NO_HEADER 1 /* Do not write TRX header */
-
-struct trx_header {
- uint32_t magic; /* "HDR0" */
- uint32_t len; /* Length of file including header */
- uint32_t crc32; /* 32-bit CRC from flag_version to end of file */
- uint32_t flag_version; /* 0:15 flags, 16:31 version */
- uint32_t offsets[3]; /* Offsets of partitions from start of header */
-};
-
-/**********************************************************************/
-
-void usage(void) __attribute__ (( __noreturn__ ));
-
-void usage(void)
-{
- fprintf(stderr, "Usage: trx [-o outfile] [-m maxlen] file [file [file]]\n");
- exit(EXIT_FAILURE);
-}
-
-int main(int argc, char **argv)
-{
- FILE *out = stdout;
- FILE *in;
- char *ofn = NULL;
- char *buf;
- char *e;
- int c, i;
- size_t n;
- uint32_t cur_len;
- unsigned long maxlen = TRX_MAX_LEN;
- struct trx_header *p;
-
- fprintf(stderr, "mjn3's trx replacement - v0.81\n");
-
- while ((c = getopt(argc, argv, "o:m:")) != -1) {
- switch (c) {
- case 'o':
- ofn = optarg;
- break;
- case 'm':
- errno = 0;
- maxlen = strtoul(optarg, &e, 0);
- if (errno || (e == optarg) || *e) {
- fprintf(stderr, "illegal numeric string\n");
- usage();
- }
-#undef ROUND
-#define ROUND 0x1000
- if (maxlen & (ROUND-1)) {
- maxlen += (ROUND - (maxlen & (ROUND-1)));
- }
- if (maxlen < ROUND) {
- fprintf(stderr, "maxlen too small (or wrapped)\n");
- usage();
- }
- break;
- default:
- usage();
- }
- }
-
- if (ofn && !(out = fopen(ofn, "w"))) {
- fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
- usage();
- }
-
- if (optind == argc) {
- fprintf(stderr, "we require at least one arg\n");
- usage();
- }
-
- if (argc - optind > 3) {
- fprintf(stderr, "too many args: %d > 3\n", argc - optind);
- usage();
- }
-
- if (maxlen > TRX_MAX_LEN) {
- fprintf(stderr, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n");
- }
-
- if (!(buf = malloc(maxlen))) {
- fprintf(stderr, "malloc failed\n");
- return EXIT_FAILURE;
- }
-
- p = (struct trx_header *) buf;
-
- p->magic = STORE32_LE(TRX_MAGIC);
- cur_len = sizeof(struct trx_header);
- p->flag_version = STORE32_LE((TRX_VERSION << 16));
-
- i = 0;
-
- while (optind < argc) {
- p->offsets[i++] = STORE32_LE(cur_len);
-
- if (!(in = fopen(argv[optind], "r"))) {
- fprintf(stderr, "can not open \"%s\" for reading\n", argv[optind]);
- usage();
- }
-
- n = fread(buf + cur_len, 1, maxlen - cur_len, in);
- if (!feof(in)) {
- fprintf(stderr, "fread failure or file \"%s\" too large\n",
- argv[optind]);
- fclose(in);
- return EXIT_FAILURE;
- }
-
- fclose(in);
-
- ++optind;
-
- if (optind < argc) {
-#undef ROUND
-#define ROUND 4
- if (n & (ROUND-1)) {
- memset(buf + cur_len + n, 0, ROUND - (n & (ROUND-1)));
- n += ROUND - (n & (ROUND-1));
- }
- }
-
- cur_len += n;
- }
-
-#undef ROUND
-#define ROUND 0x1000
- n = cur_len & (ROUND-1);
- if (n) {
- memset(buf + cur_len, 0, ROUND - n);
- cur_len += ROUND - n;
- }
-
- p->crc32 = crc32buf((char *) &p->flag_version,
- cur_len - offsetof(struct trx_header, flag_version));
- p->crc32 = STORE32_LE(p->crc32);
-
- p->len = STORE32_LE(cur_len);
-
- if (!fwrite(buf, cur_len, 1, out) || fflush(out)) {
- fprintf(stderr, "fwrite failed\n");
- return EXIT_FAILURE;
- }
-
- fclose(out);
-
- return EXIT_SUCCESS;
-}
-
-/**********************************************************************/
-/* The following was grabbed and tweaked from the old snippets collection
- * of public domain C code. */
-
-/**********************************************************************\
-|* Demonstration program to compute the 32-bit CRC used as the frame *|
-|* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
-|* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
-|* protocol). The 32-bit FCS was added via the Federal Register, *|
-|* 1 June 1982, p.23798. I presume but don't know for certain that *|
-|* this polynomial is or will be included in CCITT V.41, which *|
-|* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
-|* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
-|* errors by a factor of 10^-5 over 16-bit FCS. *|
-\**********************************************************************/
-
-/* Copyright (C) 1986 Gary S. Brown. You may use this program, or
- code or tables extracted from it, as desired without restriction.*/
-
-/* First, the polynomial itself and its table of feedback terms. The */
-/* polynomial is */
-/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
-/* Note that we take it "backwards" and put the highest-order term in */
-/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
-/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
-/* the MSB being 1. */
-
-/* Note that the usual hardware shift register implementation, which */
-/* is what we're using (we're merely optimizing it by doing eight-bit */
-/* chunks at a time) shifts bits into the lowest-order term. In our */
-/* implementation, that means shifting towards the right. Why do we */
-/* do it this way? Because the calculated CRC must be transmitted in */
-/* order from highest-order term to lowest-order term. UARTs transmit */
-/* characters in order from LSB to MSB. By storing the CRC this way, */
-/* we hand it to the UART in the order low-byte to high-byte; the UART */
-/* sends each low-bit to hight-bit; and the result is transmission bit */
-/* by bit from highest- to lowest-order term without requiring any bit */
-/* shuffling on our part. Reception works similarly. */
-
-/* The feedback terms table consists of 256, 32-bit entries. Notes: */
-/* */
-/* 1. The table can be generated at runtime if desired; code to do so */
-/* is shown later. It might not be obvious, but the feedback */
-/* terms simply represent the results of eight shift/xor opera- */
-/* tions for all combinations of data and CRC register values. */
-/* */
-/* 2. The CRC accumulation logic is the same for all CRC polynomials, */
-/* be they sixteen or thirty-two bits wide. You simply choose the */
-/* appropriate table. Alternatively, because the table can be */
-/* generated at runtime, you can start by generating the table for */
-/* the polynomial in question and use exactly the same "updcrc", */
-/* if your application needn't simultaneously handle two CRC */
-/* polynomials. (Note, however, that XMODEM is strange.) */
-/* */
-/* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
-/* of course, 32-bit entries work OK if the high 16 bits are zero. */
-/* */
-/* 4. The values must be right-shifted by eight bits by the "updcrc" */
-/* logic; the shift must be unsigned (bring in zeroes). On some */
-/* hardware you could probably optimize the shift in assembler by */
-/* using byte-swap instructions. */
-
-static const uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
-0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
-0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
-0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
-0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
-0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
-0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
-0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
-0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
-0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
-0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
-0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
-0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
-0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
-0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
-0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
-0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
-0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
-0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
-0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
-0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
-0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
-0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
-0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
-0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
-0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
-0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
-0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
-0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
-0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
-0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
-0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
-};
-
-#define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
-
-uint32_t crc32buf(char *buf, size_t len)
-{
- uint32_t crc;
-
- crc = 0xFFFFFFFF;
-
- for ( ; len; --len, ++buf)
- {
- crc = UPDC32(*buf, crc);
- }
-
- return crc;
-}
+++ /dev/null
-#! /bin/sh
-# A little script I whipped up to make it easy to
-# patch source trees and have sane error handling
-# -Erik
-#
-# (c) 2002 Erik Andersen <andersen@codepoet.org>
-
-# Set directories from arguments, or use defaults.
-targetdir=${1-.}
-patchdir=${2-../kernel-patches}
-patchpattern=${3-*}
-
-if [ ! -d "${targetdir}" ] ; then
- echo "Aborting. '${targetdir}' is not a directory."
- exit 1
-fi
-if [ ! -d "${patchdir}" ] ; then
- echo "Aborting. '${patchdir}' is not a directory."
- exit 1
-fi
-
-for i in ${patchdir}/${patchpattern} ; do
- case "$i" in
- *.gz)
- type="gzip"; uncomp="gunzip -dc"; ;;
- *.bz)
- type="bzip"; uncomp="bunzip -dc"; ;;
- *.bz2)
- type="bzip2"; uncomp="bunzip2 -dc"; ;;
- *.zip)
- type="zip"; uncomp="unzip -d"; ;;
- *.Z)
- type="compress"; uncomp="uncompress -c"; ;;
- *)
- type="plaintext"; uncomp="cat"; ;;
- esac
- echo ""
- echo "Applying ${i} using ${type}: "
- ${uncomp} ${i} | patch -p1 -E -d ${targetdir}
- if [ $? != 0 ] ; then
- echo "Patch failed! Please fix $i!"
- exit 1
- fi
-done
-
-# Check for rejects...
-if [ "`find $targetdir/ '(' -name '*.rej' -o -name '.*.rej' ')' -print`" ] ; then
- echo "Aborting. Reject files found."
- exit 1
-fi
-
-# Remove backup files
-find $targetdir/ '(' -name '*.orig' -o -name '.*.orig' ')' -exec rm -f {} \;
+++ /dev/null
-#!/bin/sh
-
-killall pppoecd
-sleep 3
-killall -9 pppoecd
\ No newline at end of file
+++ /dev/null
-#!/bin/sh
-
-if [ -x /usr/bin/sed ]; then
- SED="/usr/bin/sed";
-else
- if [ -x /bin/sed ]; then
- SED="/bin/sed";
- fi;
-fi;
-
-echo "HELLO" > .sedtest
-$SED -i -e "s/HELLO/GOODBYE/" .sedtest >/dev/null 2>&1
-
-if [ $? != 0 ] ; then
- echo build-sed-host-binary
-else
- echo use-sed-host-binary
-fi;
-rm -f .sedtest
-
-
+++ /dev/null
-*asm:
-%{mbig-endian:-EB} %{mlittle-endian:-EL} %{mcpu=*:-mcpu=%*} %{march=*:-march=%*} %{mapcs-*:-mapcs-%*} %(subtarget_asm_float_spec) %{mthumb-interwork:-mthumb-interwork} %(subtarget_extra_asm_spec)
-
-*asm_debug:
-%{gstabs*:--gstabs}%{!gstabs*:%{g*:--gdwarf2}}
-
-*asm_final:
-
-
-*asm_options:
-%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}
-
-*invoke_as:
-%{!S:-o %{|!pipe:%g.s} |
- as %(asm_options) %{!pipe:%g.s} %A }
-
-*cpp:
-%(cpp_cpu_arch) %(subtarget_cpp_spec) %{mapcs-32:%{mapcs-26: %e-mapcs-26 and -mapcs-32 may not be used together}} %{msoft-float:%{mhard-float: %e-msoft-float and -mhard_float may not be used together}} %{mbig-endian:%{mlittle-endian: %e-mbig-endian and -mlittle-endian may not be used together}}
-
-*cpp_options:
-%(cpp_unique_options) %1 %{m*} %{std*} %{ansi} %{W*&pedantic*} %{w} %{f*} %{O*} %{undef}
-
-*cpp_debug_options:
-%{d*}
-
-*cpp_unique_options:
-%{C:%{!E:%eGNU C does not support -C without using -E}} %{CC:%{!E:%eGNU C does not support -CC without using -E}} %{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*} %{P} %I %{MD:-MD %{!o:%b.d}%{o*:%.d%*}} %{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}} %{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*} %{!E:%{!M:%{!MM:%{MD|MMD:%{o*:-MQ %*}}}}} %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3} %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs} %{remap} %{g3:-dD} %{H} %C %{D*&U*&A*} %{i*} %Z %i %{E|M|MM:%W{o*}}
-
-*trad_capable_cpp:
-cc1 -E %{traditional|ftraditional|traditional-cpp:-traditional-cpp}
-
-*cc1:
-%{profile:-p}
-
-*cc1_options:
-%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}} %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*} -auxbase%{c|S:%{o*:-strip %*}%{!o*: %b}}%{!c:%{!S: %b}} %{g*} %{O*} %{W*&pedantic*} %{w} %{std*} %{ansi} %{v:-version} %{pg:-p} %{p} %{f*} %{undef} %{Qn:-fno-ident} %{--help:--help} %{--target-help:--target-help} %{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}} %{fsyntax-only:-o %j} %{-param*} %{msoft-float:%{mhard-float: %e-msoft-float and -mhard_float may not be used together}} %{!mhard-float:%{!msoft-float:-msoft-float}}
-
-*cc1plus:
-
-
-*link_gcc_c_sequence:
-%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}
-
-*endfile:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
-
-*link:
-%{h*} %{version:-v} %{b} %{Wl,*:%*} %{static:-Bstatic} %{shared:-shared} %{symbolic:-Bsymbolic} %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0} -X %{mbig-endian:-EB} -m armelf_linux -p
-
-*lib:
-%{pthread:-lpthread} %{shared:-lc} %{!shared:%{profile:-lc_p}%{!profile:-lc}}
-
-*libgcc:
-%{!mhard-float:-lfloat} %{static|static-libgcc:-lgcc -lgcc_eh}%{!static:%{!static-libgcc:%{!shared:%{!shared-libgcc:-lgcc -lgcc_eh}%{shared-libgcc:-lgcc_s%M -lgcc}}%{shared:-lgcc_s%M}}}
-
-*startfile:
-%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:%{profile:gcrt1.o%s} %{!profile:crt1.o%s}}}} crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
-
-*switches_need_spaces:
-
-
-*predefines:
-
-
-*cross_compile:
-1
-
-*version:
-3.3.3
-
-*multilib:
-. ;
-
-*multilib_defaults:
-marm mlittle-endian msoft-float mapcs-32 mno-thumb-interwork
-
-*multilib_extra:
-
-
-*multilib_matches:
-
-
-*multilib_exclusions:
-
-
-*multilib_options:
-
-
-*linker:
-collect2
-
-*link_libgcc:
-%D
-
-*md_exec_prefix:
-
-
-*md_startfile_prefix:
-
-
-*md_startfile_prefix_1:
-
-
-*startfile_prefix_spec:
-
-
-*cpp_cpu_arch:
-%{march=arm2:-D__ARM_ARCH_2__} %{march=arm250:-D__ARM_ARCH_2__} %{march=arm3:-D__ARM_ARCH_2__} %{march=arm6:-D__ARM_ARCH_3__} %{march=arm600:-D__ARM_ARCH_3__} %{march=arm610:-D__ARM_ARCH_3__} %{march=arm7:-D__ARM_ARCH_3__} %{march=arm700:-D__ARM_ARCH_3__} %{march=arm710:-D__ARM_ARCH_3__} %{march=arm720:-D__ARM_ARCH_3__} %{march=arm7100:-D__ARM_ARCH_3__} %{march=arm7500:-D__ARM_ARCH_3__} %{march=arm7500fe:-D__ARM_ARCH_3__} %{march=arm7m:-D__ARM_ARCH_3M__} %{march=arm7dm:-D__ARM_ARCH_3M__} %{march=arm7dmi:-D__ARM_ARCH_3M__} %{march=arm7tdmi:-D__ARM_ARCH_4T__} %{march=arm8:-D__ARM_ARCH_4__} %{march=arm810:-D__ARM_ARCH_4__} %{march=arm9:-D__ARM_ARCH_4T__} %{march=arm920:-D__ARM_ARCH_4__} %{march=arm920t:-D__ARM_ARCH_4T__} %{march=arm9tdmi:-D__ARM_ARCH_4T__} %{march=strongarm:-D__ARM_ARCH_4__} %{march=strongarm110:-D__ARM_ARCH_4__} %{march=strongarm1100:-D__ARM_ARCH_4__} %{march=xscale:-D__ARM_ARCH_5TE__} %{march=xscale:-D__XSCALE__} %{march=armv2:-D__ARM_ARCH_2__} %{march=armv2a:-D__ARM_ARCH_2__} %{march=armv3:-D__ARM_ARCH_3__} %{march=armv3m:-D__ARM_ARCH_3M__} %{march=armv4:-D__ARM_ARCH_4__} %{march=armv4t:-D__ARM_ARCH_4T__} %{march=armv5:-D__ARM_ARCH_5__} %{march=armv5t:-D__ARM_ARCH_5T__} %{march=armv5e:-D__ARM_ARCH_5E__} %{march=armv5te:-D__ARM_ARCH_5TE__} %{!march=*: %{mcpu=arm2:-D__ARM_ARCH_2__} %{mcpu=arm250:-D__ARM_ARCH_2__} %{mcpu=arm3:-D__ARM_ARCH_2__} %{mcpu=arm6:-D__ARM_ARCH_3__} %{mcpu=arm600:-D__ARM_ARCH_3__} %{mcpu=arm610:-D__ARM_ARCH_3__} %{mcpu=arm7:-D__ARM_ARCH_3__} %{mcpu=arm700:-D__ARM_ARCH_3__} %{mcpu=arm710:-D__ARM_ARCH_3__} %{mcpu=arm720:-D__ARM_ARCH_3__} %{mcpu=arm7100:-D__ARM_ARCH_3__} %{mcpu=arm7500:-D__ARM_ARCH_3__} %{mcpu=arm7500fe:-D__ARM_ARCH_3__} %{mcpu=arm7m:-D__ARM_ARCH_3M__} %{mcpu=arm7dm:-D__ARM_ARCH_3M__} %{mcpu=arm7dmi:-D__ARM_ARCH_3M__} %{mcpu=arm7tdmi:-D__ARM_ARCH_4T__} %{mcpu=arm8:-D__ARM_ARCH_4__} %{mcpu=arm810:-D__ARM_ARCH_4__} %{mcpu=arm9:-D__ARM_ARCH_4T__} %{mcpu=arm920:-D__ARM_ARCH_4__} %{mcpu=arm920t:-D__ARM_ARCH_4T__} %{mcpu=arm9tdmi:-D__ARM_ARCH_4T__} %{mcpu=strongarm:-D__ARM_ARCH_4__} %{mcpu=strongarm110:-D__ARM_ARCH_4__} %{mcpu=strongarm1100:-D__ARM_ARCH_4__} %{mcpu=xscale:-D__ARM_ARCH_5TE__} %{mcpu=xscale:-D__XSCALE__} %{!mcpu*:%(cpp_cpu_arch_default)}}
-
-*cpp_cpu_arch_default:
--D__ARM_ARCH_4T__
-
-*subtarget_cpp_spec:
-%{posix:-D_POSIX_SOURCE} %{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__}
-
-*subtarget_extra_asm_spec:
-
-
-*subtarget_asm_float_spec:
-%{mapcs-float:-mfloat} %{!mhard-float:-mno-fpu}
-
-*link_command:
-%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S: %(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r} %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}} %{static:} %{L*} %(link_libgcc) %o %{!nostdlib:%{!nodefaultlibs:%(link_gcc_c_sequence)}} %{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}
-
+++ /dev/null
-*asm:
-%{G*} %(endian_spec) %{mips1} %{mips2} %{mips3} %{mips4} %{mips32} %{mips64}%{mips16:%{!mno-mips16:-mips16}} %{mno-mips16:-no-mips16} %(subtarget_asm_optimizing_spec) %(subtarget_asm_debugging_spec) %{membedded-pic} %{mabi=32:-32}%{mabi=n32:-n32}%{mabi=64:-64}%{mabi=n64:-64} %{mabi=eabi} %{mabi=o64} %{!mabi*: %(asm_abi_default_spec)} %{mgp32} %{mgp64} %{march=*} %(target_asm_spec) %(subtarget_asm_spec)
-
-*asm_debug:
-%{gstabs*:--gstabs}%{!gstabs*:%{g*:--gdwarf2}}
-
-*asm_final:
-%|
-
-*asm_options:
-%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}
-
-*invoke_as:
-%{!S:-o %{|!pipe:%g.s} |
- as %(asm_options) %{!pipe:%g.s} %A }
-
-*cpp:
-%(subtarget_cpp_spec)
-
-*cpp_options:
-%(cpp_unique_options) %1 %{m*} %{std*} %{ansi} %{W*&pedantic*} %{w} %{f*} %{O*} %{undef}
-
-*cpp_debug_options:
-%{d*}
-
-*cpp_unique_options:
-%{C:%{!E:%eGNU C does not support -C without using -E}} %{CC:%{!E:%eGNU C does not support -CC without using -E}} %{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*} %{P} %I %{MD:-MD %{!o:%b.d}%{o*:%.d%*}} %{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}} %{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*} %{!E:%{!M:%{!MM:%{MD|MMD:%{o*:-MQ %*}}}}} %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3} %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs} %{remap} %{g3:-dD} %{H} %C %{D*&U*&A*} %{i*} %Z %i %{E|M|MM:%W{o*}}
-
-*trad_capable_cpp:
-cc1 -E %{traditional|ftraditional|traditional-cpp:-traditional-cpp}
-
-*cc1:
-%{profile:-p}
-
-*cc1_options:
-%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}} %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*} -auxbase%{c|S:%{o*:-strip %*}%{!o*: %b}}%{!c:%{!S: %b}} %{g*} %{O*} %{W*&pedantic*} %{w} %{std*} %{ansi} %{v:-version} %{pg:-p} %{p} %{f*} %{undef} %{Qn:-fno-ident} %{--help:--help} %{--target-help:--target-help} %{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}} %{fsyntax-only:-o %j} %{-param*} %{msoft-float:%{mhard-float: %e-msoft-float and -mhard_float may not be used together}} %{!mhard-float:%{!msoft-float:-msoft-float}}
-
-*cc1plus:
-
-
-*link_gcc_c_sequence:
-%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}
-
-*endfile:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
-
-*link:
-%{!static:--eh-frame-hdr} %(endian_spec) %{shared:-shared} %{!shared: %{!ibcs: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} %{static:-static}}}
-
-*lib:
-%{pthread:-lpthread} %{shared:-lc} %{!shared:%{mieee-fp:-lieee} %{profile:-lc_p}%{!profile:-lc}}
-
-*libgcc:
-%{static|static-libgcc:-lgcc -lgcc_eh}%{!static:%{!static-libgcc:%{!shared:%{!shared-libgcc:-lgcc -lgcc_eh}%{shared-libgcc:-lgcc_s%M -lgcc}}%{shared:%{shared-libgcc:-lgcc_s%M}%{!shared-libgcc:-lgcc}}}}
-
-*startfile:
-%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:%{profile:gcrt1.o%s} %{!profile:crt1.o%s}}}} crti.o%s %{static:crtbeginT.o%s} %{!static:%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}}
-
-*switches_need_spaces:
-
-
-*predefines:
-
-
-*cross_compile:
-1
-
-*version:
-3.3.3
-
-*multilib:
-. ;
-
-*multilib_defaults:
-EB mips1 mabi=32
-
-*multilib_extra:
-
-
-*multilib_matches:
-
-
-*multilib_exclusions:
-
-
-*multilib_options:
-
-
-*linker:
-collect2
-
-*link_libgcc:
-%D
-
-*md_exec_prefix:
-
-
-*md_startfile_prefix:
-
-
-*md_startfile_prefix_1:
-
-
-*startfile_prefix_spec:
-
-
-*subtarget_cc1_spec:
-
-
-*subtarget_cpp_spec:
-%{fno-PIC:-U__PIC__ -U__pic__} %{fno-pic:-U__PIC__ -U__pic__} %{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__} %{pthread:-D_REENTRANT}
-
-*mips_as_asm_spec:
-%{!.s:-nocpp} %{.s: %{cpp} %{nocpp}} %{pipe: %e-pipe is not supported} %{K} %(subtarget_mips_as_asm_spec)
-
-*gas_asm_spec:
-%{mtune=*} %{v}
-
-*target_asm_spec:
-%{mmips-as: %(mips_as_asm_spec)} %{!mmips-as: %(gas_asm_spec)}
-
-*subtarget_mips_as_asm_spec:
-%{v}
-
-*subtarget_asm_optimizing_spec:
-%{noasmopt:-O0} %{!noasmopt:%{O:-O2} %{O1:-O2} %{O2:-O2} %{O3:-O3}}
-
-*subtarget_asm_debugging_spec:
--g0
-
-*mdebug_asm_spec:
-%{!gdwarf*:-mdebug} %{gdwarf*:-no-mdebug}
-
-*subtarget_asm_spec:
-%{mabi=64: -64} %{!fno-PIC:%{!fno-pic:-KPIC}} %{fno-PIC:-non_shared} %{fno-pic:-non_shared}
-
-*asm_abi_default_spec:
--32
-
-*endian_spec:
-%{!EL:%{!mel:-EB}} %{EL|mel:-EL}
-
-*link_command:
-%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S: %(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r} %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}} %{static:} %{L*} %(link_libgcc) %o %{!nostdlib:%{!nodefaultlibs:%(link_gcc_c_sequence)}} %{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}
-
+++ /dev/null
-*asm:
-%{G*} %(endian_spec) %{mips1} %{mips2} %{mips3} %{mips4} %{mips32} %{mips64}%{mips16:%{!mno-mips16:-mips16}} %{mno-mips16:-no-mips16} %(subtarget_asm_optimizing_spec) %(subtarget_asm_debugging_spec) %{membedded-pic} %{mabi=32:-32}%{mabi=n32:-n32}%{mabi=64:-64}%{mabi=n64:-64} %{mabi=eabi} %{mabi=o64} %{!mabi*: %(asm_abi_default_spec)} %{mgp32} %{mgp64} %{march=*} %(target_asm_spec) %(subtarget_asm_spec)
-
-*asm_debug:
-%{gstabs*:--gstabs}%{!gstabs*:%{g*:--gdwarf2}}
-
-*asm_final:
-%|
-
-*asm_options:
-%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}
-
-*invoke_as:
-%{!S:-o %{|!pipe:%g.s} |
- as %(asm_options) %{!pipe:%g.s} %A }
-
-*cpp:
-%(subtarget_cpp_spec)
-
-*cpp_options:
-%(cpp_unique_options) %1 %{m*} %{std*} %{ansi} %{W*&pedantic*} %{w} %{f*} %{O*} %{undef}
-
-*cpp_debug_options:
-%{d*}
-
-*cpp_unique_options:
-%{C:%{!E:%eGNU C does not support -C without using -E}} %{CC:%{!E:%eGNU C does not support -CC without using -E}} %{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*} %{P} %I %{MD:-MD %{!o:%b.d}%{o*:%.d%*}} %{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}} %{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*} %{!E:%{!M:%{!MM:%{MD|MMD:%{o*:-MQ %*}}}}} %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3} %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs} %{remap} %{g3:-dD} %{H} %C %{D*&U*&A*} %{i*} %Z %i %{E|M|MM:%W{o*}}
-
-*trad_capable_cpp:
-cc1 -E %{traditional|ftraditional|traditional-cpp:-traditional-cpp}
-
-*cc1:
-%{profile:-p}
-
-*cc1_options:
-%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}} %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*} -auxbase%{c|S:%{o*:-strip %*}%{!o*: %b}}%{!c:%{!S: %b}} %{g*} %{O*} %{W*&pedantic*} %{w} %{std*} %{ansi} %{v:-version} %{pg:-p} %{p} %{f*} %{undef} %{Qn:-fno-ident} %{--help:--help} %{--target-help:--target-help} %{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}} %{fsyntax-only:-o %j} %{-param*} %{msoft-float:%{mhard-float: %e-msoft-float and -mhard_float may not be used together}} %{!mhard-float:%{!msoft-float:-msoft-float}}
-
-*cc1plus:
-
-
-*link_gcc_c_sequence:
-%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}
-
-*endfile:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
-
-*link:
-%{!static:--eh-frame-hdr} %(endian_spec) %{shared:-shared} %{!shared: %{!ibcs: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} %{static:-static}}}
-
-*lib:
-%{pthread:-lpthread} %{shared:-lc} %{!shared:%{mieee-fp:-lieee} %{profile:-lc_p}%{!profile:-lc}}
-
-*libgcc:
-%{static|static-libgcc:-lgcc -lgcc_eh}%{!static:%{!static-libgcc:%{!shared:%{!shared-libgcc:-lgcc -lgcc_eh}%{shared-libgcc:-lgcc_s%M -lgcc}}%{shared:%{shared-libgcc:-lgcc_s%M}%{!shared-libgcc:-lgcc}}}}
-
-*startfile:
-%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:%{profile:gcrt1.o%s} %{!profile:crt1.o%s}}}} crti.o%s %{static:crtbeginT.o%s} %{!static:%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}}
-
-*switches_need_spaces:
-
-
-*predefines:
-
-
-*cross_compile:
-1
-
-*version:
-3.3.3
-
-*multilib:
-. ;
-
-*multilib_defaults:
-EL mips1 mabi=32
-
-*multilib_extra:
-
-
-*multilib_matches:
-
-
-*multilib_exclusions:
-
-
-*multilib_options:
-
-
-*linker:
-collect2
-
-*link_libgcc:
-%D
-
-*md_exec_prefix:
-
-
-*md_startfile_prefix:
-
-
-*md_startfile_prefix_1:
-
-
-*startfile_prefix_spec:
-
-
-*subtarget_cc1_spec:
-
-
-*subtarget_cpp_spec:
-%{fno-PIC:-U__PIC__ -U__pic__} %{fno-pic:-U__PIC__ -U__pic__} %{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__} %{pthread:-D_REENTRANT}
-
-*mips_as_asm_spec:
-%{!.s:-nocpp} %{.s: %{cpp} %{nocpp}} %{pipe: %e-pipe is not supported} %{K} %(subtarget_mips_as_asm_spec)
-
-*gas_asm_spec:
-%{mtune=*} %{v}
-
-*target_asm_spec:
-%{mmips-as: %(mips_as_asm_spec)} %{!mmips-as: %(gas_asm_spec)}
-
-*subtarget_mips_as_asm_spec:
-%{v}
-
-*subtarget_asm_optimizing_spec:
-%{noasmopt:-O0} %{!noasmopt:%{O:-O2} %{O1:-O2} %{O2:-O2} %{O3:-O3}}
-
-*subtarget_asm_debugging_spec:
--g0
-
-*mdebug_asm_spec:
-%{!gdwarf*:-mdebug} %{gdwarf*:-no-mdebug}
-
-*subtarget_asm_spec:
-%{mabi=64: -64} %{!fno-PIC:%{!fno-pic:-KPIC}} %{fno-PIC:-non_shared} %{fno-pic:-non_shared}
-
-*asm_abi_default_spec:
--32
-
-*endian_spec:
-%{!EB:%{!meb:-EL}} %{EB|meb:-EB}
-
-*link_command:
-%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S: %(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r} %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}} %{static:} %{L*} %(link_libgcc) %o %{!nostdlib:%{!nodefaultlibs:%(link_gcc_c_sequence)}} %{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}
-
+++ /dev/null
-*asm:
-%(asm_cpu) %{.s: %{mregnames} %{mno-regnames}} %{.S: %{mregnames} %{mno-regnames}} %{v:-V} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*} %{mrelocatable} %{mrelocatable-lib} %{fpic:-K PIC} %{fPIC:-K PIC} %{memb} %{!memb: %{msdata: -memb} %{msdata=eabi: -memb}} %{mlittle} %{mlittle-endian} %{mbig} %{mbig-endian} %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: %{mcall-freebsd: -mbig} %{mcall-i960-old: -mlittle} %{mcall-linux: -mbig} %{mcall-gnu: -mbig} %{mcall-netbsd: -mbig} }}}}
-
-*asm_debug:
-%{gstabs*:--gstabs}%{!gstabs*:%{g*:--gdwarf2}}
-
-*asm_final:
-%|
-
-*asm_options:
-%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}
-
-*invoke_as:
-%{!S:-o %{|!pipe:%g.s} |
- as %(asm_options) %{!pipe:%g.s} %A }
-
-*cpp:
-%{posix: -D_POSIX_SOURCE} %(cpp_sysv) %{mads: %(cpp_os_ads) } %{myellowknife: %(cpp_os_yellowknife) } %{mmvme: %(cpp_os_mvme) } %{msim: %(cpp_os_sim) } %{mwindiss: %(cpp_os_windiss) } %{mcall-freebsd: %(cpp_os_freebsd) } %{mcall-linux: %(cpp_os_linux) } %{mcall-gnu: %(cpp_os_gnu) } %{mcall-netbsd: %(cpp_os_netbsd) } %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(cpp_os_default) }}}}}}}}}
-
-*cpp_options:
-%(cpp_unique_options) %1 %{m*} %{std*} %{ansi} %{W*&pedantic*} %{w} %{f*} %{O*} %{undef}
-
-*cpp_debug_options:
-%{d*}
-
-*cpp_unique_options:
-%{C:%{!E:%eGNU C does not support -C without using -E}} %{CC:%{!E:%eGNU C does not support -CC without using -E}} %{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*} %{P} %I %{MD:-MD %{!o:%b.d}%{o*:%.d%*}} %{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}} %{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*} %{!E:%{!M:%{!MM:%{MD|MMD:%{o*:-MQ %*}}}}} %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3} %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs} %{remap} %{g3:-dD} %{H} %C %{D*&U*&A*} %{i*} %Z %i %{E|M|MM:%W{o*}}
-
-*trad_capable_cpp:
-cc1 -E %{traditional|ftraditional|traditional-cpp:-traditional-cpp}
-
-*cc1:
-%{G*} %{mlittle: %(cc1_endian_little)} %{!mlittle: %{mlittle-endian: %(cc1_endian_little)}} %{mbig: %(cc1_endian_big)} %{!mbig: %{mbig-endian: %(cc1_endian_big)}} %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: %{mcall-aixdesc: -mbig %(cc1_endian_big) } %{mcall-freebsd: -mbig %(cc1_endian_big) } %{mcall-i960-old: -mlittle %(cc1_endian_little) } %{mcall-linux: -mbig %(cc1_endian_big) } %{mcall-gnu: -mbig %(cc1_endian_big) } %{mcall-netbsd: -mbig %(cc1_endian_big) } %{!mcall-aixdesc: %{!mcall-freebsd: %{!mcall-i960-old: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(cc1_endian_default) }}}}}} }}}} %{mno-sdata: -msdata=none } %{meabi: %{!mcall-*: -mcall-sysv }} %{!meabi: %{!mno-eabi: %{mrelocatable: -meabi } %{mcall-freebsd: -mno-eabi } %{mcall-i960-old: -meabi } %{mcall-linux: -mno-eabi } %{mcall-gnu: -mno-eabi } %{mcall-netbsd: -mno-eabi }}} %{msdata: -msdata=default} %{mno-sdata: -msdata=none} %{profile: -p}
-
-*cc1_options:
-%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}} %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*} -auxbase%{c|S:%{o*:-strip %*}%{!o*: %b}}%{!c:%{!S: %b}} %{g*} %{O*} %{W*&pedantic*} %{w} %{std*} %{ansi} %{v:-version} %{pg:-p} %{p} %{f*} %{undef} %{Qn:-fno-ident} %{--help:--help} %{--target-help:--target-help} %{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}} %{fsyntax-only:-o %j} %{-param*} %{msoft-float:%{mhard-float: %e-msoft-float and -mhard_float may not be used together}} %{!mhard-float:%{!msoft-float:-msoft-float}}
-
-*cc1plus:
-
-
-*link_gcc_c_sequence:
-%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}
-
-*endfile:
-%{mads: crtsavres.o%s %(endfile_ads)} %{myellowknife: crtsavres.o%s %(endfile_yellowknife)} %{mmvme: crtsavres.o%s %(endfile_mvme)} %{msim: crtsavres.o%s %(endfile_sim)} %{mwindiss: %(endfile_windiss)} %{mcall-freebsd: crtsavres.o%s %(endfile_freebsd) } %{mcall-linux: crtsavres.o%s %(endfile_linux) } %{mcall-gnu: crtsavres.o%s %(endfile_gnu) } %{mcall-netbsd: crtsavres.o%s %(endfile_netbsd) } %{mvxworks: crtsavres.o%s %(endfile_vxworks) } %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %{!mvxworks: %(crtsavres_default) %(endfile_default) }}}}}}}}}}
-
-*link:
-%{!static:--eh-frame-hdr} %{h*} %{v:-V} %{!msdata=none:%{G*}} %{msdata=none:-G0} %{YP,*} %{R*} %{Qy:} %{!Qn:-Qy} %(link_shlib) %{!Wl,-T*: %{!T*: %(link_start) }} %(link_target) %(link_os)
-
-*lib:
-%{mads: %(lib_ads) } %{myellowknife: %(lib_yellowknife) } %{mmvme: %(lib_mvme) } %{msim: %(lib_sim) } %{mwindiss: %(lib_windiss) } %{mcall-freebsd: %(lib_freebsd) } %{mcall-linux: %(lib_linux) } %{mcall-gnu: %(lib_gnu) } %{mcall-netbsd: %(lib_netbsd) } %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(lib_default) }}}}}}}}}
-
-*libgcc:
-%{static|static-libgcc:-lgcc -lgcc_eh}%{!static:%{!static-libgcc:%{!shared:%{!shared-libgcc:-lgcc -lgcc_eh}%{shared-libgcc:-lgcc_s%M -lgcc}}%{shared:%{shared-libgcc:-lgcc_s%M}%{!shared-libgcc:-lgcc}}}}
-
-*startfile:
-%{mads: %(startfile_ads) } %{myellowknife: %(startfile_yellowknife) } %{mmvme: %(startfile_mvme) } %{msim: %(startfile_sim) } %{mwindiss: %(startfile_windiss) } %{mcall-freebsd: %(startfile_freebsd) } %{mcall-linux: %(startfile_linux) } %{mcall-gnu: %(startfile_gnu) } %{mcall-netbsd: %(startfile_netbsd) } %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %(startfile_default) }}}}}}}}}
-
-*switches_need_spaces:
-
-
-*predefines:
-
-
-*cross_compile:
-1
-
-*version:
-3.3.3
-
-*multilib:
-. mhard-float;nof !mhard-float;
-
-*multilib_defaults:
-mbig mcall-sysv
-
-*multilib_extra:
-fPIC mstrict-align
-
-*multilib_matches:
-mcpu=401 msoft-float;mcpu=403 msoft-float;mcpu=405 msoft-float;mcpu=ec603e msoft-float;mcpu=801 msoft-float;mcpu=821 msoft-float;mcpu=823 msoft-float;mcpu=860 msoft-float;msoft-float msoft-float;
-
-*multilib_exclusions:
-
-
-*multilib_options:
-msoft-float
-
-*linker:
-collect2
-
-*link_libgcc:
-%D
-
-*md_exec_prefix:
-
-
-*md_startfile_prefix:
-
-
-*md_startfile_prefix_1:
-
-
-*startfile_prefix_spec:
-
-
-*cpp_default:
-
-
-*asm_cpu:
-%{!mcpu*: %{mpower: %{!mpower2: -mpwr}} %{mpower2: -mpwrx} %{mpowerpc*: -mppc} %{mno-power: %{!mpowerpc*: -mcom}} %{!mno-power: %{!mpower2: %(asm_default)}}} %{mcpu=common: -mcom} %{mcpu=power: -mpwr} %{mcpu=power2: -mpwrx} %{mcpu=power3: -m604} %{mcpu=power4: -mpower4} %{mcpu=powerpc: -mppc} %{mcpu=rios: -mpwr} %{mcpu=rios1: -mpwr} %{mcpu=rios2: -mpwrx} %{mcpu=rsc: -mpwr} %{mcpu=rsc1: -mpwr} %{mcpu=401: -mppc} %{mcpu=403: -m403} %{mcpu=405: -m405} %{mcpu=505: -mppc} %{mcpu=601: -m601} %{mcpu=602: -mppc} %{mcpu=603: -mppc} %{mcpu=603e: -mppc} %{mcpu=ec603e: -mppc} %{mcpu=604: -mppc} %{mcpu=604e: -mppc} %{mcpu=620: -mppc} %{mcpu=630: -m604} %{mcpu=740: -mppc} %{mcpu=7400: -mppc} %{mcpu=7450: -mppc} %{mcpu=750: -mppc} %{mcpu=801: -mppc} %{mcpu=821: -mppc} %{mcpu=823: -mppc} %{mcpu=860: -mppc} %{mcpu=8540: -me500} %{maltivec: -maltivec}
-
-*asm_default:
--mppc
-
-*cpp_sysv:
-%{mrelocatable*: -D_RELOCATABLE} %{fpic: -D__PIC__=1 -D__pic__=1} %{!fpic: %{fPIC: -D__PIC__=2 -D__pic__=2}}
-
-*crtsavres_default:
-crtsavres.o%s
-
-*lib_ads:
---start-group -lads -lc --end-group
-
-*lib_yellowknife:
---start-group -lyk -lc --end-group
-
-*lib_mvme:
---start-group -lmvme -lc --end-group
-
-*lib_sim:
---start-group -lsim -lc --end-group
-
-*lib_freebsd:
- %{!shared: %{!pg: %{!pthread:-lc} %{pthread:-lc_r}} %{pg: %{!pthread:-lc_p} %{pthread:-lc_r_p}} }
-
-*lib_gnu:
-%{mnewlib: --start-group -lgnu -lc --end-group } %{!mnewlib: %{shared:-lc} %{!shared: %{pthread:-lpthread } %{profile:-lc_p} %{!profile:-lc}}}
-
-*lib_linux:
-%{mnewlib: --start-group -llinux -lc --end-group } %{!mnewlib: %{shared:-lc} %{!shared: %{pthread:-lpthread } %{profile:-lc_p} %{!profile:-lc}}}
-
-*lib_netbsd:
-%{profile:-lgmon -lc_p} %{!profile:-lc}
-
-*lib_vxworks:
-
-
-*lib_windiss:
---start-group -li -lcfp -lwindiss -lram -limpl -limpfp --end-group
-
-*lib_default:
-%(lib_linux)
-
-*startfile_ads:
-ecrti.o%s crt0.o%s crtbegin.o%s
-
-*startfile_yellowknife:
-ecrti.o%s crt0.o%s crtbegin.o%s
-
-*startfile_mvme:
-ecrti.o%s crt0.o%s crtbegin.o%s
-
-*startfile_sim:
-ecrti.o%s sim-crt0.o%s crtbegin.o%s
-
-*startfile_freebsd:
-%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:%{profile:gcrt1.o%s} %{!profile:crt1.o%s}}}} crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
-
-*startfile_gnu:
-%{!shared: %{!static: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}}} %{static: %{pg:gcrt0.o%s} %{!pg:%{p:gcrt0.o%s} %{!p:crt0.o%s}}} %{mnewlib: ecrti.o%s} %{!mnewlib: crti.o%s} %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
-
-*startfile_linux:
-%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}} %{mnewlib: ecrti.o%s} %{!mnewlib: crti.o%s} %{static:crtbeginT.o%s} %{!static:%{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}}
-
-*startfile_netbsd:
-ncrti.o%s crt0.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
-
-*startfile_vxworks:
-
-
-*startfile_windiss:
-crt0.o%s crtbegin.o%s
-
-*startfile_default:
-%(startfile_linux)
-
-*endfile_ads:
-crtend.o%s ecrtn.o%s
-
-*endfile_yellowknife:
-crtend.o%s ecrtn.o%s
-
-*endfile_mvme:
-crtend.o%s ecrtn.o%s
-
-*endfile_sim:
-crtend.o%s ecrtn.o%s
-
-*endfile_freebsd:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
-
-*endfile_gnu:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} %{mnewlib: ecrtn.o%s} %{!mnewlib: crtn.o%s}
-
-*endfile_linux:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} %{mnewlib: ecrtn.o%s} %{!mnewlib: crtn.o%s}
-
-*endfile_netbsd:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} ncrtn.o%s
-
-*endfile_vxworks:
-
-
-*endfile_windiss:
-crtend.o%s
-
-*endfile_default:
-%(endfile_linux)
-
-*link_path:
-
-
-*link_shlib:
-%{shared:-shared} %{!shared: %{static:-static}}
-
-*link_target:
-%{mlittle: --oformat elf32-powerpcle } %{mlittle-endian: --oformat elf32-powerpcle } %{!mlittle: %{!mlittle-endian: %{!mbig: %{!mbig-endian: %{mcall-i960-old: --oformat elf32-powerpcle} }}}}
-
-*link_start:
-%{mads: %(link_start_ads) } %{myellowknife: %(link_start_yellowknife) } %{mmvme: %(link_start_mvme) } %{msim: %(link_start_sim) } %{mwindiss: %(link_start_windiss) } %{mcall-freebsd: %(link_start_freebsd) } %{mcall-linux: %(link_start_linux) } %{mcall-gnu: %(link_start_gnu) } %{mcall-netbsd: %(link_start_netbsd) } %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %{!mcall-freebsd: %(link_start_default) }}}}}}}}}
-
-*link_start_ads:
--T ads.ld%s
-
-*link_start_yellowknife:
--T yellowknife.ld%s
-
-*link_start_mvme:
--Ttext 0x40000
-
-*link_start_sim:
-
-
-*link_start_freebsd:
-
-
-*link_start_gnu:
-
-
-*link_start_linux:
-
-
-*link_start_netbsd:
-
-
-*link_start_vxworks:
-
-
-*link_start_windiss:
-
-
-*link_start_default:
-%(link_start_linux)
-
-*link_os:
-%{mads: %(link_os_ads) } %{myellowknife: %(link_os_yellowknife) } %{mmvme: %(link_os_mvme) } %{msim: %(link_os_sim) } %{mwindiss: %(link_os_windiss) } %{mcall-freebsd: %(link_os_freebsd) } %{mcall-linux: %(link_os_linux) } %{mcall-gnu: %(link_os_gnu) } %{mcall-netbsd: %(link_os_netbsd) } %{mcall-uclibc: %(link_os_linux_uclibc) } %{!mads: %{!myellowknife: %{!mmvme: %{!msim: %{!mwindiss: %{!mcall-freebsd: %{!mcall-linux: %{!mcall-gnu: %{!mcall-netbsd: %{!mcall-uclibc: %(link_os_default) }}}}}}}}}}
-
-*link_os_ads:
-
-
-*link_os_yellowknife:
-
-
-*link_os_mvme:
-
-
-*link_os_sim:
--m elf32ppcsim
-
-*link_os_freebsd:
- %{p:%e`-p' not supported; use `-pg' and gprof(1)} %{Wl,*:%*} %{v:-V} %{assert*} %{R*} %{rpath*} %{defsym*} %{shared:-Bshareable %{h*} %{soname*}} %{!shared: %{!static: %{rdynamic: -export-dynamic} %{!dynamic-linker: -dynamic-linker /usr/libexec/ld-elf.so.1}} %{static:-Bstatic}} %{symbolic:-Bsymbolic}
-
-*link_os_linux:
--m elf32ppclinux %{!shared: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}}}
-
-*link_os_gnu:
--m elf32ppclinux %{!shared: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}}}
-
-*link_os_netbsd:
-%{!shared: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /usr/libexec/ld.elf_so}}}
-
-*link_os_vxworks:
--r
-
-*link_os_windiss:
-
-
-*link_os_linux_uclibc:
--m elf32ppclinux %{!shared: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}}}
-
-*link_os_default:
-%(link_os_linux_uclibc)
-
-*cc1_endian_big:
-
-
-*cc1_endian_little:
-%{!mstrict-align: %{!mno-strict-align: %{!mcall-i960-old: -mstrict-align } }}
-
-*cc1_endian_default:
-%(cc1_endian_big)
-
-*cpp_os_ads:
-
-
-*cpp_os_yellowknife:
-
-
-*cpp_os_mvme:
-
-
-*cpp_os_sim:
-
-
-*cpp_os_freebsd:
- -D__ELF__ -D__PPC__ -D__ppc__ -D__PowerPC__ -D__powerpc__ -Acpu=powerpc -Amachine=powerpc
-
-*cpp_os_gnu:
--D__unix__ -D__gnu_hurd__ -D__GNU__ %{!undef: %{!ansi: -Dunix -D__unix}} -Asystem=gnu -Asystem=unix -Asystem=posix %{pthread:-D_REENTRANT}
-
-*cpp_os_linux:
--D__unix__ -D__gnu_linux__ -D__linux__ %{!undef: %{!ansi: %{!std=*:-Dunix -D__unix -Dlinux -D__linux} %{std=gnu*:-Dunix -D__unix -Dlinux -D__linux}}} -Asystem=unix -Asystem=posix %{pthread:-D_REENTRANT}
-
-*cpp_os_netbsd:
--D__powerpc__ -D__NetBSD__ -D__ELF__ -D__KPRINTF_ATTRIBUTE__
-
-*cpp_os_rtems:
-%{!mcpu*: %{!Dppc*: %{!Dmpc*: -Dmpc750} } }%{mcpu=403: %{!Dppc*: %{!Dmpc*: -Dppc403} } } %{mcpu=505: %{!Dppc*: %{!Dmpc*: -Dmpc505} } } %{mcpu=601: %{!Dppc*: %{!Dmpc*: -Dppc601} } } %{mcpu=602: %{!Dppc*: %{!Dmpc*: -Dppc602} } } %{mcpu=603: %{!Dppc*: %{!Dmpc*: -Dppc603} } } %{mcpu=603e: %{!Dppc*: %{!Dmpc*: -Dppc603e} } } %{mcpu=604: %{!Dppc*: %{!Dmpc*: -Dmpc604} } } %{mcpu=750: %{!Dppc*: %{!Dmpc*: -Dmpc750} } } %{mcpu=821: %{!Dppc*: %{!Dmpc*: -Dmpc821} } } %{mcpu=860: %{!Dppc*: %{!Dmpc*: -Dmpc860} } }
-
-*cpp_os_vxworks:
--DCPU_FAMILY=PPC %{!mcpu*: %{mpowerpc*: -DCPU=PPC603} %{!mno-powerpc: -DCPU=PPC603}} %{mcpu=powerpc: -DCPU=PPC603} %{mcpu=401: -DCPU=PPC403} %{mcpu=403: -DCPU=PPC403} %{mcpu=405: -DCPU=PPC405} %{mcpu=601: -DCPU=PPC601} %{mcpu=602: -DCPU=PPC603} %{mcpu=603: -DCPU=PPC603} %{mcpu=603e: -DCPU=PPC603} %{mcpu=ec603e: -DCPU=PPC603} %{mcpu=604: -DCPU=PPC604} %{mcpu=604e: -DCPU=PPC604} %{mcpu=620: -DCPU=PPC604} %{mcpu=740: -DCPU=PPC603} %{mcpu=7450: -DCPU=PPC603} %{mcpu=750: -DCPU=PPC603} %{mcpu=801: -DCPU=PPC603} %{mcpu=821: -DCPU=PPC603} %{mcpu=823: -DCPU=PPC603} %{mcpu=860: -DCPU=PPC603}
-
-*cpp_os_windiss:
--D__rtasim -D__EABI__ -D__ppc %{!msoft-float: -D__hardfp}
-
-*cpp_os_default:
-%(cpp_os_linux)
-
-*link_command:
-%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S: %(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r} %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}} %{static:} %{L*} %(link_libgcc) %o %{!nostdlib:%{!nodefaultlibs:%(link_gcc_c_sequence)}} %{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}
-
+++ /dev/null
-This is a stupid little patch adding an option to change all uid/gid to
-root/root in the generated filesystem. We really need to teach mksquashfs
-about device tables though...
-
---- squashfs1.3r3/squashfs-tools/mksquashfs.c-dist 2004-03-29 20:35:37.000000000 -0600
-+++ squashfs1.3r3/squashfs-tools/mksquashfs.c 2004-03-29 22:28:51.000000000 -0600
-@@ -136,6 +136,8 @@
- stotal_bytes, stotal_inode_bytes, stotal_directory_bytes, sinode_count, sfile_count, ssym_count, sdev_count, sdir_count, sdup_files;
- int restore = 0;
-
-+unsigned int root_owned = 0;
-+
- /*flag whether destination file is a block device */
- int block_device = 0;
-
-@@ -421,6 +423,11 @@
- return SQUASHFS_INVALID;
- }
-
-+ if (root_owned) {
-+ buf.st_uid = 0;
-+ buf.st_gid = 0;
-+ }
-+
- base->mode = SQUASHFS_MODE(buf.st_mode);
- base->uid = get_uid(&file_type, (squashfs_uid) buf.st_uid);
- base->inode_type = file_type;
-@@ -1268,6 +1275,8 @@
- root_name = argv[i];
- } else if(strcmp(argv[i], "-version") == 0) {
- VERSION();
-+ } else if (strcmp(argv[i], "-root-owned") == 0) {
-+ root_owned = TRUE;
- } else {
- ERROR("%s: invalid option\n\n", argv[0]);
- printOptions:
+++ /dev/null
-diff -Nur --exclude=CVS xc-011010.src/include/extensions/lbxstr.h xc-011010/include/extensions/lbxstr.h
---- xc-011010.src/include/extensions/lbxstr.h Tue Jul 31 20:44:35 2001
-+++ xc-011010/include/extensions/lbxstr.h Sun Apr 21 12:35:05 2002
-@@ -25,7 +25,7 @@
- #ifndef _LBXSTR_H_
- #define _LBXSTR_H_
-
--#include <X11/extensions/XLbx.h>
-+#include "XLbx.h"
-
- #define LBXNAME "LBX"
-
-diff -Nur --exclude=CVS xc-011010.src/programs/Xserver/hw/kdrive/fbdev/fbdev.h xc-011010/programs/Xserver/hw/kdrive/fbdev/fbdev.h
---- xc-011010.src/programs/Xserver/hw/kdrive/fbdev/fbdev.h Sun Jun 3 17:52:45 2001
-+++ xc-011010/programs/Xserver/hw/kdrive/fbdev/fbdev.h Sun Apr 21 12:36:25 2002
-@@ -29,6 +29,7 @@
- #include <linux/fb.h>
- #include <unistd.h>
- #include <sys/mman.h>
-+#include <sys/types.h>
- #include "kdrive.h"
- #include "layer.h"
-
-diff -Nur xc-011010.src2/lib/X11/Xlib.h xc-011010/lib/X11/Xlib.h
---- xc-011010.src/programs/Xserver/hw/kdrive/linux/ts.c Tue Jul 10 22:58:19 2001
-+++ xc-011010/programs/Xserver/hw/kdrive/linux/ts.c Tue Apr 23 20:16:23 2002
-@@ -33,65 +33,48 @@
- #include "kdrive.h"
- #include "Xpoll.h"
- #include <sys/ioctl.h>
--#include <linux/h3600_ts.h> /* touch screen events */
-+
-+typedef struct {
-+ unsigned short pressure;
-+ unsigned short x;
-+ unsigned short y;
-+ unsigned short pad;
-+ struct timeval stamp;
-+} TS_EVENT;
-
- static long lastx = 0, lasty = 0;
- int TsScreen;
- extern int TsFbdev;
-
--void
--TsRead (int tsPort, void *closure)
--{
-- TS_EVENT event;
-- long buf[3];
-- int n;
-- long pressure;
-- long x, y;
-- unsigned long flags;
-- unsigned long buttons;
--
-- n = Ps2ReadBytes (tsPort, (char *) &event,
-- sizeof (event), sizeof (event));
-- if (n == sizeof (event))
-- {
-- if (event.pressure)
-- {
-- /*
-- * HACK ATTACK. (static global variables used !)
-- * Here we test for the touch screen driver actually being on the
-- * touch screen, if it is we send absolute coordinates. If not,
-- * then we send delta's so that we can track the entire vga screen.
-- */
-- if (TsScreen == TsFbdev) {
-- flags = KD_BUTTON_1;
-- x = event.x;
-- y = event.y;
-- } else {
-- flags = /* KD_BUTTON_1 |*/ KD_MOUSE_DELTA;
-- if ((lastx == 0) || (lasty == 0)) {
-- x = 0;
-- y = 0;
-- } else {
-- x = event.x - lastx;
-- y = event.y - lasty;
-- }
-- lastx = event.x;
-- lasty = event.y;
-- }
-- } else {
-- flags = KD_MOUSE_DELTA;
-- x = 0;
-- y = 0;
-- lastx = 0;
-- lasty = 0;
-- }
-- KdEnqueueMouseEvent (flags, x, y);
-+void TsRead (int tsPort, void *closure) {
-+ TS_EVENT event;
-+ long buf[3];
-+ int n;
-+ long pressure;
-+ long x, y;
-+ unsigned long flags;
-+ unsigned long buttons;
-+
-+ n = Ps2ReadBytes(tsPort, (char *) &event, sizeof (event), sizeof (event));
-+ if (n >= sizeof (event)) {
-+ if (event.pressure >= 100) {
-+ flags = KD_BUTTON_1;
-+ x = (960 - event.x) * 640 / (920);
-+ y = (960 - event.y) * 480 / (920);
-+ //ErrorF("flags %d x %d y %dn",flags,event.x,event.y);
-+ }
-+ else {
-+ flags = KD_MOUSE_DELTA;
-+ x = lastx;
-+ y = lasty;
- }
-+ KdEnqueueMouseEvent(flags, x, y);
-+ }
- }
-
- char *TsNames[] = {
-- "/dev/ts",
-- "/dev/h3600_ts" /* temporary name; note this code can try
-+ "/dev/ucb1x00-ts",
-+ "/dev/ts" /* temporary name; note this code can try
- to open more than one device */
- };
-
-@@ -99,9 +82,7 @@
-
- int TsInputType;
-
--int
--TsInit (void)
--{
-+int TsInit (void) {
- int i;
- int TsPort;
-
-diff -Nur xc-011010.src/startx xc-011010/startx
---- ../../buildroot-tux.Apr25-1/build/xc-011010.src/startx Thu Apr 25 05:20:35 2002
-+++ xc-011010/startx Sun Apr 28 05:35:35 2002
-@@ -0,0 +1,11 @@
-+#!/bin/sh
-+killall Xfbdev
-+sleep 1
-+export DISPLAY=":0"
-+/usr/X11R6/bin/Xfbdev -ac &
-+sleep 4
-+/usr/X11R6/bin/matchbox &
-+sleep 1
-+/usr/X11R6/bin/minisys &
-+/usr/X11R6/bin/minitime &
-+/usr/X11R6/bin/rxvt &
-diff -Nur xc-011010.src/lib/Xft/xftgram.y xc-011010/lib/Xft/xftgram.y
---- ../../buildroot-tux.Apr25-1/build/xc-011010/lib/Xft/xftgram.y Thu Apr 25 05:20:35 2002
-+++ xc-011010/lib/Xft/xftgram.y Sun Apr 28 05:35:35 2002
-@@ -165,6 +165,7 @@
- matrix.yx = $4;
- matrix.__REALLY_YY__ = $5;
- }
-+ ;
- number : INTEGER
- { $$ = (double) $1; }
- | DOUBLE
-diff -Nur xc-011010.src/programs/twm/gram.y xc-011010/programs/twm/gram.y
---- ../../buildroot-tux.Apr25-1/build/xc-011010/programs/twm/gram.y Thu Apr 25 05:20:35 2002
-+++ xc-011010/programs/twm/gram.y Sun Apr 28 05:35:35 2002
-@@ -650,6 +650,7 @@
- RemoveDQuote(ptr);
- $$ = ptr;
- }
-+ ;
- number : NUMBER { $$ = $1; }
- ;
-
+++ /dev/null
-diff -urN uClibc/ldso-0.9.24/COPYRIGHT uClibc.ldso.24/ldso-0.9.24/COPYRIGHT
---- uClibc/ldso-0.9.24/COPYRIGHT 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/COPYRIGHT 2001-04-23 12:43:53.000000000 -0500
-@@ -0,0 +1,49 @@
-+/*
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald, David Engel,
-+ * Hongjiu Lu and Mitch D'Souza
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+/* Notice of general intent:
-+ *
-+ * The linux operating system generally contains large amounts of code
-+ * that fall under the GNU General Public License, or GPL for short.
-+ * This file contains source code that by it's very nature would always
-+ * be linked with an application program, and because of this a GPL
-+ * type of copyright on this file would place restrictions upon the
-+ * distribution of binary-only commercial software. Since the goal of
-+ * the Linux project as a whole is not to discourage the development and
-+ * distribution of commercial software for Linux, this file has been
-+ * placed under a more relaxed BSD-style of copyright.
-+ *
-+ * It is the general understanding of the above contributors that a
-+ * program executable linked to a library containing code that falls
-+ * under the GPL or GLPL style of license is not subject to the terms of
-+ * the GPL or GLPL license if the program executable(s) that are supplied
-+ * are linked to a shared library form of the GPL or GLPL library, and as
-+ * long as the form of the shared library is such that it is possible for
-+ * the end user to modify and rebuild the library and use it in
-+ * conjunction with the program executable.
-+ */
-diff -urN uClibc/ldso-0.9.24/Makefile uClibc.ldso.24/ldso-0.9.24/Makefile
---- uClibc/ldso-0.9.24/Makefile 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/Makefile 2003-11-06 16:38:45.000000000 -0600
-@@ -0,0 +1,52 @@
-+# Makefile for uClibc
-+#
-+# Copyright (C) 2000,2001 Erik Andersen <andersen@uclibc.org>
-+#
-+# This program is free software; you can redistribute it and/or modify it under
-+# the terms of the GNU Library General Public License as published by the Free
-+# Software Foundation; either version 2 of the License, or (at your option) any
-+# later version.
-+#
-+# This program is distributed in the hope that it will be useful, but WITHOUT
-+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-+# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-+# details.
-+#
-+# You should have received a copy of the GNU Library General Public License
-+# along with this program; if not, write to the Free Software Foundation, Inc.,
-+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+#
-+# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-+# other sundry sources. Files within this library are copyright by their
-+# respective copyright holders.
-+
-+TOPDIR=../
-+include $(TOPDIR)Rules.mak
-+
-+ALL_SUBDIRS = ldso libdl
-+
-+
-+all: headers
-+ifeq ($(strip $(BUILD_UCLIBC_LDSO)),y)
-+ $(MAKE) -C ldso;
-+else
-+ echo "Not building ld-uClibc"
-+endif
-+
-+shared:
-+ifeq ($(strip $(BUILD_UCLIBC_LDSO)),y)
-+ $(MAKE) -C libdl;
-+else
-+ echo "Not building libdl"
-+endif
-+
-+headers:
-+ $(LN) -fs $(TOPDIR)../include/elf.h include/
-+ $(LN) -fs ../ldso/$(TARGET_ARCH)/boot1_arch.h include/
-+ $(LN) -fs ../ldso/$(TARGET_ARCH)/ld_syscalls.h include/
-+ $(LN) -fs ../ldso/$(TARGET_ARCH)/ld_sysdep.h include/
-+
-+clean:
-+ set -e ; for d in $(ALL_SUBDIRS) ; do $(MAKE) -C $$d $@ ; done
-+ -find . -name '*~' | xargs $(RM)
-+ $(RM) include/elf.h include/boot1_arch.h include/ld_syscalls.h include/ld_sysdep.h
-diff -urN uClibc/ldso-0.9.24/README uClibc.ldso.24/ldso-0.9.24/README
---- uClibc/ldso-0.9.24/README 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/README 2001-05-31 16:23:20.000000000 -0500
-@@ -0,0 +1,841 @@
-+
-+Apr 20, 2001 -- Manuel Novoa III
-+
-+Inital port for uClibc from debian ld.so_1.9.11-9.tar.gz.
-+
-+Removed a.out support.
-+
-+****************** original ld.so.lsm file **************************
-+Begin3
-+Title: Linux shared, dynamic linker and utilities.
-+Version: 1.9.11
-+Entered-date: 01MAY99
-+Description: This package contains ld.so, ld-linux.so, ldconfig,
-+ ldd and libdl.
-+Keywords: dynamic linker, shared library, ld.so, ld-linux.so,
-+ ldconfig, ldd, libdl
-+Author: david@ods.com (David Engel)
-+Maintained-by: david@ods.com (David Engel)
-+Primary-site: tsx-11.mit.edu /pub/linux/packages/GCC
-+ ld.so-1.9.11.tar.gz
-+Alternate-site: sunsite.unc.edu /pub/Linux/GCC
-+ ld.so-1.9.11.tar.gz
-+Platform: Linux 2.0.0 or later.
-+Copying-policy: Copyrighted but freely distributable.
-+End
-+*********************************************************************
-+ Original README starts here
-+*********************************************************************
-+
-+This package contains my ELF dynamic linkers (ld-linux.so.1), dynamic
-+linker library (libdl.so.1) and utilities (ldconfig and ldd) for Linux.
-+
-+You need Linux kernel 2.0.0 or later with ELF support compiled in
-+(i.e. not loaded as a module) to use this package.
-+
-+The dynamic linker is used to bootstrap programs and load shared
-+libraries at startup. The dynamic linker library is used to
-+dynamically load shared libraries after a program is running.
-+Ldconfig is used to automatically update the symbolic links to shared
-+libraries and build the cache file used by the dynamic linker. Ldd is
-+used to list the shared libraries used by a program.
-+
-+Please see the included manual pages for further details.
-+
-+To install, simply run "sh instldso.sh" as root. Ready-to-go versions
-+of all end-products are provided so nothing should need to be compiled
-+or linked. If you are still using libc5 as your primary development
-+library, you should use the "--devfiles" option when running
-+instldso.sh to install the file needed to compile with libdl.
-+
-+ELF versions of gcc, binutils and libc are now required to compile
-+everything, including the old, unsupported, a.out dynamic linker.
-+Finally, an optimization level of O2 or higher must be used to compile
-+ld-linux.so and libdl.so due the use of inline functions.
-+
-+Notable contributors to this package include Eric Youngdale, Peter
-+MacDonald, Hongjiu Lu, Linus Torvalds, Lars Wirzenius, Mitch D'Souza,
-+Rik Faith, Andreas Schwab and Adam Richter (not necessarily in that
-+order).
-+
-+###################### IMPORTANT NOTICES #############################
-+
-+A.OUT SUPPORT:
-+
-+As of ld.so-1.9.0, the old, a.out dynamic loader is no longer
-+officially supported. The code is still included and built, but I
-+make no promises that it will work. I will accept patches for it,
-+but they will not be tested by me.
-+
-+GLIBC (AKA LIBC6) SUPPORT:
-+
-+As of ld.so-1.9.0, the main focus of this package is to ease the
-+transition to libc6. No significant, new features are expected to be
-+added. If you need new features, switch to libc6.
-+
-+Except for libpthread.so, the sonames of the core libraries provided
-+with libc6 have been chosen so they do not conflict with those
-+provided by libc5 and ld.so. However, the current plan is not use
-+new, nonconflicting sonames for other libraries such as ncurses and
-+X11. This presents two problems. First, libraries using the same
-+soname for both libc5 and libc6 can not be placed in the same
-+directory. Second, the dynamic linkers need to make sure not to load
-+a library for the wrong version of libc.
-+
-+The first problem is easy. Just move the old, libc5-based libraries
-+to new directories (e.g. /lib/libc5-compat, /usr/lib/libc5-compat,
-+etc.) and add those directories to /etc/ld.so.conf. Then install the
-+new, libc6-based versions in the standard places.
-+
-+The second problem is more difficult. Ideally, the dynamic linkers
-+would be changed to perform a complete dependency analysis on every
-+library to be loaded to make sure the wrong versions aren't used.
-+This approach doesn't seem worth the added complexity, especially
-+since we now have symbol versioning for ELF libraries. Instead a
-+simpler approach will be used, at least initially.
-+
-+Ldconfig has been modified to perform a (currently simple) dependency
-+analysis on libraries and to store an indication in /etc/ld.so.cache
-+of whether a library is for libc5, libc6 or an unknown libc. The
-+dynamic linkers then only need to make a simple check at run-time to
-+make sure they don't load the wrong version of a library.
-+
-+The dynamic linker for libc5 provided in this package, has already
-+been modified to use the new information in /etc/ld.so.cache. For
-+glibc versions 2.0.1 and earlier, the dynamic linker for libc6 needs
-+the patch contained in glibc.patch. You should apply the patch and
-+rebuild glibc before using the new ldconfig.
-+
-+As stated above, the dependency analysis currently done by ldconfig is
-+rather simple. Basically, it looks for the sonames used by the
-+various versions of libc, libm and libdl. For any approach using a
-+dependency analysis such as this to work, it is very important that
-+shared libraries be built with complete dependency information. This
-+can be done by using the appropriate -l options when running 'gcc
-+-shared'. For example, when building libfoo.so which depends on libc
-+and libbar, you should add -lbar and -lc gcc command line.
-+
-+######################################################################
-+
-+Changes in version 1.9.11:
-+
-+ Fixed a bug in ld-linux.so where a reference to an
-+ undefined symbol could cause a segfault.
-+
-+ Added a clarification for LD_PRELOAD to the ld.so manual
-+ page and added a symlink for ld-linux.so (Bug#33123).
-+
-+ Don't install ldd for Debian except for the m68k arch
-+ because glibc 2.1 now includes it (Bug#35458).
-+
-+Changes in version 1.9.10:
-+
-+ Changed ldconfig to issue a warning and not overwrite a
-+ regular file with a symlink (Bug#30859).
-+
-+ Changed Debian packaging to conflict with and replace the
-+ ldconfig package (Bug#29398).
-+
-+Changes in version 1.9.9:
-+
-+ Changed ld-linux.so and libdl.so to match glibc by not
-+ allowing user preloads of system libraries into setu/gid
-+ binaries unless the library itself is setuid.
-+
-+ Fixed problems in ld-linux.so on the sparc architecture
-+ (Juan Cespedes).
-+
-+Changes in version 1.9.8:
-+
-+ Changed ldconfig to allow the expected type for all
-+ libraries in a directory to be optionally specified
-+ (Mark Phillips). See the ldconfig man page.
-+
-+ Changed ldconfig to use the same type names used in the
-+ change above when the -p option is used.
-+
-+Changes in version 1.9.7:
-+
-+ Changed ldd for m68k to use /lib/ld.so.1 instead of
-+ /lib/ld-linux.so.2.
-+
-+ Added support for dladdr to libdl.so (Eduard Gode).
-+
-+ Fixed a small memory leak in libdl.so (Richard Garnish).
-+
-+ Fixed a bug in ldconfig when the -l option was used on a
-+ filename without a '/' in it.
-+
-+ Updated the man pages (Bug#6404, Bug#9721, Bug#10652,
-+ Bug#13494 and Bug#14127). They could still use some work.
-+
-+ No longer install the info page since it's way out of date.
-+
-+ Fixed minor Debian packaging problems (Bug#13160,
-+ Bug#15577 and Bug#19345).
-+
-+Changes in version 1.9.6:
-+
-+ Changed ldd to not use the glibc dynamic linker when run
-+ on a libc5-based shared library.
-+
-+ Added a -q option to ldconfig which causes warnings not
-+ to be printed (Bob Tinsley).
-+
-+ Dropped support for the Debian libdl1-dev package.
-+
-+ Changed ld-linux.so to be compilable with gcc 2.8.0 (Sven
-+ Verdoolaege)
-+
-+Changes in version 1.9.5:
-+
-+ Fixed a bug in ldd where ld-linux.so.2 was not called
-+ correctly when run on shared libraries.
-+
-+ Fixed a problem in the previous version where some
-+ Makefiles were not architecture independent.
-+
-+Changes in version 1.9.4:
-+
-+ Fixed a bug in ld.so introduced in the previous version
-+ which broke preloads.
-+
-+ Turned a.out support back on by default, at least for the
-+ time being. There are no promises to keep it.
-+
-+Changes in version 1.9.3:
-+
-+ Fixed buffer overflow bugs in ld-linux.so and ld.so.
-+
-+ Changed the README file a little to clarify a couple of
-+ things.
-+
-+ Changed ldconfig to chroot to the specified directory when
-+ the new -r option is used (Bob Tinsley).
-+
-+Changes in version 1.9.2:
-+
-+ Removed /usr/local/lib from the default /etc/ld.so.conf
-+ for Debian (Bug#8181).
-+
-+ Changed ldconfig to be 64-bit clean (H.J. Lu).
-+
-+Changes in version 1.9.1:
-+
-+ Changed ldconfig to try to determine which libc a
-+ library is for even if it doesn't have an soname.
-+
-+ Fixed a bug in ldconfig where an older library using
-+ the glibc naming convention would be used instead of
-+ a newer library.
-+
-+ Changed to ld-linux.so and libdl.so to not require the
-+ libc5 headers in order to compile.
-+
-+ Changed ldconfig and ldd to be compilable with either
-+ libc5 or libc6.
-+
-+Changes in version 1.9.0:
-+
-+ Changed to not build the old, a.out dynamic loader by
-+ default.
-+
-+ Changed instldso.sh to require the --force option to
-+ make sure users read the README file.
-+
-+ Changed instldso.sh to not install the libdl.so
-+ development files unless the --devfiles option is used.
-+
-+ Changed instldso.sh to not strip binaries and libraries
-+ if the --no-strip option is used.
-+
-+ Changed the Debian packaging to put the development files
-+ which conflict with glibc in a new libdl1-dev package.
-+
-+ Changed ldd to use the glibc dynamic linker, if it is
-+ available, when run on a shared library.
-+
-+ Changed ld-linux.so to print the load addresses of
-+ libraries, ala glibc, when run by ldd.
-+
-+ Changed ld-linux.so to allow the libraries listed in
-+ LD_PRELOAD to be separated by white space in addition to
-+ colons.
-+
-+ Changed ld-linux.so to load the libraries listed in
-+ LD_PRELOAD for setu/gid programs as long as they can be
-+ loaded securely.
-+
-+ Changed ldconfig to update the symlinks for the dynamic
-+ linkers.
-+
-+ Changed ldconfig to try to determine if an ELF library is
-+ intended for libc5 or libc6 and save the infomation in the
-+ cache. The mechanism used is rather simplistic and may
-+ need to be enhanced.
-+
-+ Changed ldconfig to print the type of ELF library when
-+ printing the cache.
-+
-+ Changed ld-linux.so to only load ELF shared libraries for
-+ use with libc5 or an unknown libc.
-+
-+Changes in version 1.8.10:
-+
-+ Fixed a bug in ldconfig where a symlink could be used
-+ instead of a regular file.
-+
-+ Fixed a Debian packaging problem for the sparc
-+ architecture.
-+
-+Changes in version 1.8.9:
-+
-+ Changed ldconfig to only cache the symlinks it creates.
-+ This make the behavior of the dynamic linkers consistent
-+ with how they would behave if a cache was not used.
-+
-+ Changed ldconfig to cache the symlinks that it finds but
-+ use the name of the symlink as the soname instead of the
-+ actual soname.
-+
-+Changes in version 1.8.8:
-+
-+ Minor documentation updates to reflect recent changes.
-+
-+ Changed ld.so and ld-linux.so to perform more complete
-+ validation on ld.so.cache before using it.
-+
-+ Changed ldconfig to accept libraries with inconsistent
-+ sonames since glibc is going to use them. A warning is
-+ still printed in debug mode.
-+
-+ Changed the install script to not strip _dl_debug_state
-+ from ld-linux.so since gdb needs it.
-+
-+ More sparc fixes (Derrick Brashear).
-+
-+ Changed ldconfig to not issue a warning when a linker
-+ script disguised as a shared library is found.
-+
-+ Fixed a bug in ld-linux.so where some registers were
-+ not preserved on the first call to a function causing
-+ problems for non-C-like languages (Tim Renouf).
-+
-+ Fixed a bug in ld-linux.so where global variables were
-+ not always mapped correctly across dynamically loaded
-+ libraries (Mikihiko Nakao).
-+
-+ Converted to new Debian source packaging format (Shaya
-+ Potter).
-+
-+Changes in version 1.8.6/7:
-+
-+ Never released as some unofficial patches used these
-+ version numbers.
-+
-+Changes in version 1.8.5:
-+
-+ Fixed a bug in ld.so introduced in the previous changes.
-+
-+Changes in version 1.8.4:
-+
-+ Changed ldconfig to completely ignore symbolic links.
-+
-+ Changed ldconfig to issue the warning concerning an
-+ inconsistent soname in non-verbose mode.
-+
-+ Changed ld-linux.so back to not keep ld.so.cache mapped
-+ at all times.
-+
-+ Changed Debian packaging to compress man pages, strip all
-+ binaries (Bug#5125) and include a shlibs file.
-+
-+Changes in version 1.8.3:
-+
-+ Changed ld-linux.so to process LD_PRELOAD before
-+ /etc/ld.so.preload.
-+
-+ Fixed a Debian packaging problem where libdl might not
-+ be available if other packages were upgraded at the same
-+ time (Debian Bug#4728).
-+
-+ Changed ldd to always exit with status 1 if any errors
-+ occur (Debian Bug#4188).
-+
-+ Fixed some minor problems in instldso.sh (Mike Castle and
-+ Wolfgang Franke).
-+
-+ Changed ldconfig to issue a warning in verbose mode when
-+ skipping a library because the soname doesn't match.
-+
-+ More sparc fixes (Miguel de Icaza).
-+
-+ Don't link with -N when building ld.so (Alan Modra).
-+
-+ Changed ld-linux.so to better support position-dependant
-+ libraries (NIIBE Yutaka).
-+
-+Changes in version 1.8.2:
-+
-+ Added a texinfo file for ld.so and libdl (Michael
-+ Deutschmann).
-+
-+ Minor sparc and installation changes (Elliot Lee).
-+
-+ Added multiple architecture support for Debian (Leland
-+ Lucius).
-+
-+ Changed libdl to better support RTLD_NEXT (Eric
-+ Youngdale). Note: the exact meaning of ETLD_NEXT is
-+ still not clear in all cases.
-+
-+ Removed some libc dependencies from libdl. Still need
-+ to remove malloc and free.
-+
-+Changes in version 1.8.1:
-+
-+ Changed ld.so to be compiled as ELF. This also means
-+ that ELF support is now required. A.out support is
-+ still optional.
-+
-+ Changed ld-linux.so and libdl.so to use the rpath in the
-+ executable instead of in the invoking shared library.
-+
-+ More m68k fixes (Andreas Schwab).
-+
-+ Various sparc fixes (Miguel de Icaza).
-+
-+ Changed ldcnnfig to ignore libraries ending in '~'.
-+
-+ Changed ldconfig to allow alternative conf and cache
-+ files to be specified on the command-line.
-+
-+ Changed libdl.so to work when dlsym is passed a NULL
-+ handle pointer.
-+
-+Changes in version 1.8.0:
-+
-+ Changed ld-linux.so to be more liberal when checking to
-+ see if a library is already loaded. This should avoid
-+ the duplicate loading problem for programs linkeed with
-+ the -rpath option.
-+
-+ Various m68k fixes (Andreas Schwab).
-+
-+ Changed ld.so to only use LD_AOUT_LIBRARY_PATH and
-+ LD_AOUT_PRELOAD and ld-linux.so to only use
-+ LD_LIBRARY_PATH and LD_PRELOAD. LD_ELF_LIBRARY_PATH
-+ and LD_ELF_PRELOAD are no longer supported.
-+
-+ Changed ld-linux.so to allow debugging of shared and
-+ dynamically loaded libraries (H.J. Lu, Andreas Schwab).
-+
-+ Changed ld-linux.so to preload ELF shared libraries
-+ listed in /etc/ld.so.preload. This allows secure
-+ preloads, even for setuid/setgid programs.
-+
-+ Changed ld-linux.so to keep ld.so.cache mapped at all
-+ times.
-+
-+ Changed ldconfig to allow #-style comments in ld.so.conf.
-+
-+ Removed various compiler warnings (Richard Sladkey and
-+ David Engel).
-+
-+ Changed ldd to work on ELF shared libraries. This may
-+ need a little more work.
-+
-+Changes in version 1.7.14:
-+
-+ Changed ldconfig to recognize ELF shared libraries
-+ generated by post-2.6 versions of ld (Andreas Schwab).
-+
-+ Changed ldconfig to not remove stale links that do not
-+ have a version number since they may be needed by ld.
-+
-+Changes in version 1.7.13:
-+
-+ Fixed a problem in ld-linux.so where a program linked
-+ with a shared library that was not used could result in
-+ a segmentation fault (H.J. Lu).
-+
-+Changes in version 1.7.12:
-+
-+ Fixed a problem in libdl.so where the wrong library
-+ could be marked as global when RTLD_GLOBAL was used
-+ (Lars Heete).
-+
-+ Installed dlfcn.h with libdl.so instead of requiring
-+ it to be supplied with libc.
-+
-+ Removed support for libldso.a since it was nearly
-+ impossible to use anyway.
-+
-+ Changed ldd to detect when the program being checked
-+ exited abnormally.
-+
-+Changes in version 1.7.11:
-+
-+ Changed ld.so and ld-linux.so to delete all variations
-+ of LD_PRELOAD and LD_LIBRARY_PATH for set[ug]id programs,
-+ This makes it harder for broken set[ug]id programs to be
-+ compromised.
-+
-+ Fixed a problem in libdl.so where dlsym would not accept
-+ the handle returned from dlopen(0, *).
-+
-+Changes in version 1.7.10:
-+
-+ Changed ld-linux.so and libdl.so to support RTLD_GLOBAL
-+ (Eric Youngdale).
-+
-+Changes in version 1.7.9:
-+
-+ Fixed a problem in ld-linux.so in detecting when the
-+ new user/group information is provided by the kernel.
-+
-+ Fixed a problem in ld-linux.so where a buffer could be
-+ overflowed if a large number of libraries were loaded
-+ (Thomas Moore).
-+
-+Changes in version 1.7.8:
-+
-+ Changed the Makefiles and install scripts to support
-+ a.out- and ELF-only configurations.
-+
-+ Changed ld-linux.so to use the user/group information
-+ provided by linux 1.3.23+ instead of making syscalls
-+ to get it.
-+
-+ Changed libdl.so to support RTLD_NEXT (Glenn Fowler).
-+
-+ Changed libdl.so to only execute the fini sections
-+ instead of completely closing libraries at exit (Glenn
-+ Fowler).
-+
-+ Changed ld.so and ld-linux.so to print the required
-+ cache version when a mismatch is detected.
-+
-+ Changed ld-linux.so to not require on /dev/zero (Ralph
-+ Loader).
-+
-+ Minor m68k cleanups (Andreas Schwab).
-+
-+Changes in version 1.7.7:
-+
-+ Fixed problems compiling with recent 1.3.x kernels.
-+
-+ Changed ld-linux.so to not use MAP_DENYWRITE until the
-+ permission issue regarding it is resolved.
-+
-+Changes in version 1.7.6:
-+
-+ Fixed a bug in ld-linux.so dealing with a zero-length
-+ LD_{ELF_}PRELOAD.
-+
-+ Changed ld.so and ld-linux.so to truncate all variations
-+ of LD_PRELOAD and LD_LIBRARY_PATH for set[ug]id programs.
-+
-+Changes in version 1.7.5:
-+
-+ Changed ldconfig to recognize libraries without any
-+ version number (eg. libXYZ.so).
-+
-+ Changed ldconfig to not generate a corrupt cache when
-+ the disk is full or other write errors occur.
-+
-+ Changed ld-linux.so to map files with MAP_DENYWRITE to
-+ keep them from being changed while the file is in use
-+ (Rick Sladkey).
-+
-+ Changed libdl to not overwrite the scope pointer of a
-+ library if it was already loaded (H.J. Lu).
-+
-+ Changed ld-linux.so so gdb can be used on constructors
-+ (Eric Youngdale).
-+
-+ Changed ldconfig to ignore ELF libraries where the soname
-+ does not match the file name on the assumption that it is
-+ a used at compile-time (eg. libcurses.so -> libncruses.so).
-+
-+Changes in version 1.7.4:
-+
-+ Changed ld-linux.so and libdl to use the appropriate
-+ rpaths when searching for shared libraries (Eric
-+ Youngdale).
-+
-+ Changed ld-linux.so to search rpath before using the
-+ cache. This more closely conforms to the IBCS standard.
-+
-+Changes in version 1.7.3:
-+
-+ Changed ld-linux.so to only print a library name the
-+ first time it is loaded when run from ldd.
-+
-+ Fixed a bug in ldconfig where an invalid cache could be
-+ generated if a directory was specified multiple times in
-+ ld.so.conf.
-+
-+ Changed ld-linux.so so it will return the address of a
-+ weak symbol when called from dlsym in libdl (Eric
-+ Youngdale.
-+
-+Changes in version 1.7.2:
-+
-+ Changed libdl.so again to fix the undefined foobar
-+ problem.
-+
-+Changes in version 1.7.1:
-+
-+ Changed libdl so it will compile at optimization level
-+ O3 or higher.
-+
-+ Changed ldconfig to always create the cache file with
-+ mode 644.
-+
-+ Changed ldconfig to not ingore valid symlinks.
-+
-+ Changed ldconfig to use the library name as the soname
-+ for ELF libraries that do not have an soname entry.
-+
-+ Changed ld-linux.so to print the actual, requested library
-+ name at the time it is loaded instead of trying to figure
-+ it out after the fact.
-+
-+Changes in version 1.7.0:
-+
-+ Changed ldconfig to read the actual soname from the image
-+ for ELF libraries and make it available to ld-linux.so.
-+ The soname for DLL libraries is still determined by
-+ truncating the minor numbers from the image file name.
-+
-+ Changed ldconfig to no longer support the undocumented
-+ sort options.
-+
-+ Changed ld.so to require a valid cache to find libraries
-+ in directories specified in ld.so.conf. /usr/lib and /lib
-+ are still searched as a last resort. Ld-linux.so already
-+ operated this way.
-+
-+ Fixed a bug in libldso.a where the arguments to
-+ shared_loader were not parsed correctly (Wolfram Gloger).
-+
-+ Added support for RELA-style relocations under Linux/68k
-+ (Andreas Schwab).
-+
-+ Changed ld-linux.so to only map the cache once for all
-+ libraries instead of individually for each library.
-+
-+ Changed ld-linux.so continue searching the cache instead of
-+ giving up when failing to load the first entry found.
-+
-+ Changed ld-linux.so to produce output similar to ld.so when
-+ run from ldd or when errors occur.
-+
-+Changes in version 1.6.7:
-+
-+ Changed the install scripts to make sure that ld.so and
-+ ld-linux.so are always usable.
-+
-+ Added support for Linux/Sparc (Eric Youngdale).
-+
-+ Added support for Linux/68k (Andreas Schwab).
-+
-+ Fixed various bugs in ld-linux.so dealing with closing
-+ files, unmapping memory, dereferencing NULL pointers and
-+ printing library names (David Engel, Eric Youngdale and
-+ Andreas Schwab).
-+
-+ Replaced the manual page for libdl with a freely
-+ distributable one (Adam Richter).
-+
-+ Fixed a bug in ld-linux.so where LD_LIBRARY_PATH and
-+ LD_PRELOAD were not cleared for setuid/setgid programs.
-+
-+ Fixed a bug in libdl where dlsym would not return the
-+ correct address of a symbol if it was redefined in another
-+ library (Oleg Kibirev).
-+
-+ Changed ld-linux.so to use the following order to search
-+ for libraries: LD_{ELF_}LIBRARY_PATH, ld.so.cache, rpath,
-+ /usr/lib and /lib.
-+
-+ Changed ld-linux.so to not needlessly allocate memory when
-+ using ld.so.cache.
-+
-+Changes in version 1.6.6:
-+
-+ Changed ldconfig to not warn about removing stale links
-+ unless the -v option is specified.
-+
-+ Added manual pages for libdl (from FreeBSD/Sun)
-+
-+ Fixed a bug in ld.so dealing with preloading of objects
-+ generated by recent versions of ld (Mitch D'Souza).
-+
-+ Fixed bugs in ldd where some errors were either not
-+ detected or not printed.
-+
-+ Fixed a bug in ld-linux.so where the trailing nul in a
-+ library name was not being copied (Owen Taylor).
-+
-+Changes in version 1.6.5:
-+
-+ Changed ldconfig to remove stale symbolic links.
-+
-+ Added debug hooks in ld-linux.so and libdl.so to be used
-+ by a future version of gdb (Eric Youngdale).
-+
-+Changes in version 1.6.4:
-+
-+ Change ld-linux.so to print on stdout instead of stderr
-+ when run from ldd.
-+
-+ Added support for Debian GNU/Linux packaging.
-+
-+Changes in version 1.6.3:
-+
-+ Fixed a bug in libdl when closing a library (H.J. Lu).
-+
-+Changes in version 1.6.2:
-+
-+ Changed the error message printed by ldd when a file is
-+ not a.out or ELF. It used to only list a.out formats.
-+
-+ Changed ldconfig to no longer cache and set up links for
-+ ld-linux.so.
-+
-+ Changed ld-linux.so and libdl to not conflict with upcoming
-+ changes in kernel header files.
-+
-+ Changed ld-linux.so to not print preloaded libraries.
-+
-+Changes in version 1.6.1:
-+
-+ Updated the installation script.
-+
-+ Changed ld.so and ld-linux.so to look for LD_AOUT_PRELOAD
-+ and LD_ELF_PRELOAD, respectively, before LD_PRELOAD.
-+
-+ Changed ld.so and ld-linux.so to use LD_AOUT_LIBRARY_PATH
-+ and LD_ELF_LIBRARY_PATH, respectively, instead of
-+ AOUT_LD_LIBRARY_PATH and ELF_LD_LIBRARY_PATH.
-+
-+Changes in version 1.6.0:
-+
-+ Changed ldconfig to process libraries which do not have
-+ a minor version or patch level number.
-+
-+ Incorporated ld-linux.so and libdl.so.
-+
-+ Changed ld.so and ld-linux.so to not miss entries in the
-+ cache when the fully qualified library is requested.
-+
-+ Changed ldconfig to use stdout instead of stderr when
-+ printing the cache.
-+
-+Changes in version 1.5.3:
-+
-+ LD_PRELOAD enhancements (Tristan Gigold).
-+
-+ LD_PRELOAD patch for linux-68k (Andreas Schwab).
-+
-+Changes in version 1.5.2:
-+
-+ More ELF changes (Mitch D'Souza).
-+
-+ Changed ldconfig to also update the link for ld-linux.so.
-+
-+Changes in version 1.5.1:
-+
-+ More ELF and LD_PRELOAD changes (Mitch D'Souza).
-+
-+Changes in version 1.5.0:
-+
-+ Chnaged all executables to QMAGIC (Mitch D'Souza and Rick
-+ Sladkey).
-+
-+ Added preliminary support for ELF to ldd and ldconfig (Eric
-+ Youndale and H.J. Lu).
-+
-+ Added support for LD_PRELOAD to ld.so (Mitch D'Souza).
-+
-+ Removed the "advertising" clause from the copyright notices
-+ in all source files.
-+
-+Changes in version 1.4.4:
-+
-+ Changed ldconfig to support QMAGIC libraries.
-+
-+ Fixed a bug in ld.so where some of the error messages had
-+ transposed arguments.
-+
-+Changes in version 1.4.3:
-+
-+ Fixed an obscure bug in ld.so where an index was not being
-+ incremented when a library was not found using the cache.
-+
-+Changes in version 1.4.2:
-+
-+ Changed ldconfig to issue a warning and continue instead
-+ of an error and exiting when a link can't be updated.
-+ This is useful when some libraries are imported on read-
-+ only file systems, such as an NFS mounted /usr.
-+
-+ Changed ld.so to be more robust in searching for libraries.
-+ A library is not considered found unless it can actually be
-+ loaded. If a library is not found using the cache, the
-+ standard directories are searched as in pre-cache versions.
-+
-+Changes in version 1.4.1:
-+
-+ Fixed minor Makefile problems.
-+
-+ Added support for linux-68k.
-+
-+ Fixed a bug in ld.so where libraries with absolute paths
-+ were not handled correctly.
-+
-+ Changed ld.so to ignore the directory in the names of
-+ shared libraries by default. This allows older libraries
-+ with absolute paths, such as the XView libraries, to take
-+ advantage of the cache support.
-+
-+ Added a minimal usage message to ldconfig.
-+
-+Changes in version 1.4:
-+
-+ Fixed bug in ld.so where minor version numbers were not
-+ reported correctly when a minor version incompatibility
-+ was found.
-+
-+ Fixed bug in ldconfig where libraries with subversion
-+ numbers greater than 9 were not compared correctly.
-+
-+ Added Mitch D'Souza's support for suppressing warning
-+ messages from ld.so about minor version incompatibilities.
-+
-+ Added Mitch D'Souza's support for using a cache to speed
-+ up searching for libraries in the standard directories.
-+
-+ Added Mitch D'Souza's support for a debugging version of
-+ ld.so. Link with -lldso if you think you are experiencing
-+ dynamic linker problems.
-+
-+Changes in version 1.3:
-+
-+ Added support for libraries using absolute pathnames. If I
-+ had known that the XView libraries used them, I would have
-+ added this earlier.
-+
-+ Fixed a bug handling old libraries using a pathname beginning
-+ with '/' or '/lib/'.
-+
-+Changes in version 1.2a:
-+
-+ Fixed a minor bug in ldd which caused all files, specifically
-+ scripts, to be recognized as binaries. Thanks to Olaf Flebbe
-+ for reporting it.
-+
-+David Engel
-+david@sw.ods.com
-diff -urN uClibc/ldso-0.9.24/include/.cvsignore uClibc.ldso.24/ldso-0.9.24/include/.cvsignore
---- uClibc/ldso-0.9.24/include/.cvsignore 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/.cvsignore 2003-08-19 01:05:30.000000000 -0500
-@@ -0,0 +1,4 @@
-+elf.h
-+ld_syscalls.h
-+ld_sysdep.h
-+boot1_arch.h
-diff -urN uClibc/ldso-0.9.24/include/dlfcn.h uClibc.ldso.24/ldso-0.9.24/include/dlfcn.h
---- uClibc/ldso-0.9.24/include/dlfcn.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/dlfcn.h 2003-08-19 01:05:30.000000000 -0500
-@@ -0,0 +1,22 @@
-+/* User functions for run-time dynamic loading. libdl version */
-+#ifndef _DLFCN_H
-+#define _DLFCN_H 1
-+
-+#include <features.h>
-+#include <bits/dlfcn.h>
-+
-+#define RTLD_NEXT ((void *) -1l)
-+#define RTLD_DEFAULT ((void *) 0)
-+
-+/* Structure containing information about object searched using
-+ `dladdr'. */
-+typedef struct
-+{
-+ __const char *dli_fname; /* File name of defining object. */
-+ void *dli_fbase; /* Load address of that object. */
-+ __const char *dli_sname; /* Name of nearest symbol. */
-+ void *dli_saddr; /* Exact value of nearest symbol. */
-+} Dl_info;
-+
-+
-+#endif /* dlfcn.h */
-diff -urN uClibc/ldso-0.9.24/include/ld_elf.h uClibc.ldso.24/ldso-0.9.24/include/ld_elf.h
---- uClibc/ldso-0.9.24/include/ld_elf.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/ld_elf.h 2003-11-04 07:07:45.000000000 -0600
-@@ -0,0 +1,93 @@
-+#ifndef LINUXELF_H
-+#define LINUXELF_H
-+
-+#include <ld_sysdep.h> /* before elf.h to get ELF_USES_RELOCA right */
-+#include <elf.h>
-+#include <link.h>
-+
-+#ifdef DEBUG
-+# define LDSO_CONF "../util/ld.so.conf"
-+# define LDSO_CACHE "../util/ld.so.cache"
-+# define LDSO_PRELOAD "../util/ld.so.preload"
-+#else
-+# define LDSO_CONF UCLIBC_RUNTIME_PREFIX "etc/ld.so.conf"
-+# define LDSO_CACHE UCLIBC_RUNTIME_PREFIX "etc/ld.so.cache"
-+# define LDSO_PRELOAD UCLIBC_RUNTIME_PREFIX "etc/ld.so.preload"
-+#endif
-+
-+
-+#define LIB_ANY -1
-+#define LIB_DLL 0
-+#define LIB_ELF 1
-+#define LIB_ELF64 0x80
-+#define LIB_ELF_LIBC5 2
-+#define LIB_ELF_LIBC6 3
-+#define LIB_ELF_LIBC0 4
-+
-+/* Forward declarations for stuff defined in ld_hash.h */
-+struct dyn_elf;
-+struct elf_resolve;
-+
-+
-+/* Definitions and prototypes for cache stuff */
-+#ifdef USE_CACHE
-+extern int _dl_map_cache(void);
-+extern int _dl_unmap_cache(void);
-+
-+#define LDSO_CACHE_MAGIC "ld.so-"
-+#define LDSO_CACHE_MAGIC_LEN (sizeof LDSO_CACHE_MAGIC -1)
-+#define LDSO_CACHE_VER "1.7.0"
-+#define LDSO_CACHE_VER_LEN (sizeof LDSO_CACHE_VER -1)
-+
-+typedef struct {
-+ char magic [LDSO_CACHE_MAGIC_LEN];
-+ char version [LDSO_CACHE_VER_LEN];
-+ int nlibs;
-+} header_t;
-+
-+typedef struct {
-+ int flags;
-+ int sooffset;
-+ int liboffset;
-+} libentry_t;
-+
-+#else
-+static inline void _dl_map_cache(void) { }
-+static inline void _dl_unmap_cache(void) { }
-+#endif
-+
-+
-+/* Function prototypes for non-static stuff in readelflib1.c */
-+int _dl_copy_fixups(struct dyn_elf * tpnt);
-+extern int _dl_parse_copy_information(struct dyn_elf *rpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type);
-+extern void _dl_parse_lazy_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type);
-+extern int _dl_parse_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type);
-+extern struct elf_resolve * _dl_load_shared_library(int secure,
-+ struct dyn_elf **rpnt, struct elf_resolve *tpnt, char *full_libname);
-+extern struct elf_resolve * _dl_load_elf_shared_library(int secure,
-+ struct dyn_elf **rpnt, char *libname);
-+extern struct elf_resolve *_dl_check_if_named_library_is_loaded(const char *full_libname);
-+extern int _dl_linux_resolve(void);
-+
-+
-+/*
-+ * Datatype of a relocation on this platform
-+ */
-+#ifdef ELF_USES_RELOCA
-+# define ELF_RELOC ElfW(Rela)
-+#else
-+# define ELF_RELOC ElfW(Rel)
-+#endif
-+
-+
-+/* Convert between the Linux flags for page protections and the
-+ ones specified in the ELF standard. */
-+#define LXFLAGS(X) ( (((X) & PF_R) ? PROT_READ : 0) | \
-+ (((X) & PF_W) ? PROT_WRITE : 0) | \
-+ (((X) & PF_X) ? PROT_EXEC : 0))
-+
-+
-+#endif /* LINUXELF_H */
-diff -urN uClibc/ldso-0.9.24/include/ld_hash.h uClibc.ldso.24/ldso-0.9.24/include/ld_hash.h
---- uClibc/ldso-0.9.24/include/ld_hash.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/ld_hash.h 2003-08-19 08:11:05.000000000 -0500
-@@ -0,0 +1,103 @@
-+#ifndef _LD_HASH_H_
-+#define _LD_HASH_H_
-+
-+#ifndef RTLD_NEXT
-+#define RTLD_NEXT ((void*)-1)
-+#endif
-+
-+struct dyn_elf{
-+ unsigned long flags;
-+ struct elf_resolve * dyn;
-+ struct dyn_elf * next_handle; /* Used by dlopen et al. */
-+ struct dyn_elf * next;
-+ struct dyn_elf * prev;
-+};
-+
-+struct elf_resolve{
-+ /* These entries must be in this order to be compatible with the interface used
-+ by gdb to obtain the list of symbols. */
-+ ElfW(Addr) loadaddr; /* Base address shared object is loaded at. */
-+ char *libname; /* Absolute file name object was found in. */
-+ ElfW(Dyn) *dynamic_addr; /* Dynamic section of the shared object. */
-+ struct elf_resolve * next;
-+ struct elf_resolve * prev;
-+ /* Nothing after this address is used by gdb. */
-+ enum {elf_lib, elf_executable,program_interpreter, loaded_file} libtype;
-+ struct dyn_elf * symbol_scope;
-+ unsigned short usage_count;
-+ unsigned short int init_flag;
-+ unsigned int nbucket;
-+ unsigned long * elf_buckets;
-+ /*
-+ * These are only used with ELF style shared libraries
-+ */
-+ unsigned long nchain;
-+ unsigned long * chains;
-+ unsigned long dynamic_info[24];
-+
-+ unsigned long dynamic_size;
-+ unsigned long n_phent;
-+ Elf32_Phdr * ppnt;
-+
-+#if defined(__mips__)
-+ /* Needed for MIPS relocation */
-+ unsigned long mips_gotsym;
-+ unsigned long mips_local_gotno;
-+ unsigned long mips_symtabno;
-+#endif
-+
-+#ifdef __powerpc__
-+ /* this is used to store the address of relocation data words, so
-+ * we don't have to calculate it every time, which requires a divide */
-+ unsigned long data_words;
-+#endif
-+};
-+
-+#define COPY_RELOCS_DONE 1
-+#define RELOCS_DONE 2
-+#define JMP_RELOCS_DONE 4
-+#define INIT_FUNCS_CALLED 8
-+
-+extern struct dyn_elf * _dl_symbol_tables;
-+extern struct elf_resolve * _dl_loaded_modules;
-+extern struct dyn_elf * _dl_handles;
-+
-+extern struct elf_resolve * _dl_check_hashed_files(const char * libname);
-+extern struct elf_resolve * _dl_add_elf_hash_table(const char * libname,
-+ char * loadaddr, unsigned long * dynamic_info,
-+ unsigned long dynamic_addr, unsigned long dynamic_size);
-+
-+enum caller_type{symbolrel=0,copyrel=1,resolver=2};
-+extern char * _dl_find_hash(const char * name, struct dyn_elf * rpnt1,
-+ struct elf_resolve * f_tpnt, enum caller_type);
-+
-+extern int _dl_linux_dynamic_link(void);
-+
-+extern char * _dl_library_path;
-+extern char * _dl_not_lazy;
-+extern unsigned long _dl_elf_hash(const char * name);
-+
-+static inline int _dl_symbol(char * name)
-+{
-+ if(name[0] != '_' || name[1] != 'd' || name[2] != 'l' || name[3] != '_')
-+ return 0;
-+ return 1;
-+}
-+
-+
-+#define LD_ERROR_NOFILE 1
-+#define LD_ERROR_NOZERO 2
-+#define LD_ERROR_NOTELF 3
-+#define LD_ERROR_NOTMAGIC 4
-+#define LD_ERROR_NOTDYN 5
-+#define LD_ERROR_MMAP_FAILED 6
-+#define LD_ERROR_NODYNAMIC 7
-+#define LD_WRONG_RELOCS 8
-+#define LD_BAD_HANDLE 9
-+#define LD_NO_SYMBOL 10
-+
-+
-+
-+#endif /* _LD_HASH_H_ */
-+
-+
-diff -urN uClibc/ldso-0.9.24/include/ld_string.h uClibc.ldso.24/ldso-0.9.24/include/ld_string.h
---- uClibc/ldso-0.9.24/include/ld_string.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/ld_string.h 2003-09-29 16:46:00.000000000 -0500
-@@ -0,0 +1,281 @@
-+#ifndef _LINUX_STRING_H_
-+#define _LINUX_STRING_H_
-+
-+extern void *_dl_malloc(int size);
-+extern char *_dl_getenv(const char *symbol, char **envp);
-+extern void _dl_unsetenv(const char *symbol, char **envp);
-+extern char *_dl_strdup(const char *string);
-+extern void _dl_dprintf(int, const char *, ...);
-+
-+
-+static size_t _dl_strlen(const char * str);
-+static char *_dl_strcat(char *dst, const char *src);
-+static char * _dl_strcpy(char * dst,const char *src);
-+static int _dl_strcmp(const char * s1,const char * s2);
-+static int _dl_strncmp(const char * s1,const char * s2,size_t len);
-+static char * _dl_strchr(const char * str,int c);
-+static char *_dl_strrchr(const char *str, int c);
-+static char *_dl_strstr(const char *s1, const char *s2);
-+static void * _dl_memcpy(void * dst, const void * src, size_t len);
-+static int _dl_memcmp(const void * s1,const void * s2,size_t len);
-+static void *_dl_memset(void * str,int c,size_t len);
-+static char *_dl_get_last_path_component(char *path);
-+static char *_dl_simple_ltoa(char * local, unsigned long i);
-+static char *_dl_simple_ltoahex(char * local, unsigned long i);
-+
-+#ifndef NULL
-+#define NULL ((void *) 0)
-+#endif
-+
-+static inline size_t _dl_strlen(const char * str)
-+{
-+ register char *ptr = (char *) str;
-+
-+ while (*ptr)
-+ ptr++;
-+ return (ptr - str);
-+}
-+
-+static inline char *_dl_strcat(char *dst, const char *src)
-+{
-+ register char *ptr = dst;
-+
-+ while (*ptr)
-+ ptr++;
-+
-+ while (*src)
-+ *ptr++ = *src++;
-+ *ptr = '\0';
-+
-+ return dst;
-+}
-+
-+static inline char * _dl_strcpy(char * dst,const char *src)
-+{
-+ register char *ptr = dst;
-+
-+ while (*src)
-+ *dst++ = *src++;
-+ *dst = '\0';
-+
-+ return ptr;
-+}
-+
-+static inline int _dl_strcmp(const char * s1,const char * s2)
-+{
-+ register unsigned char c1, c2;
-+
-+ do {
-+ c1 = (unsigned char) *s1++;
-+ c2 = (unsigned char) *s2++;
-+ if (c1 == '\0')
-+ return c1 - c2;
-+ }
-+ while (c1 == c2);
-+
-+ return c1 - c2;
-+}
-+
-+static inline int _dl_strncmp(const char * s1,const char * s2,size_t len)
-+{
-+ register unsigned char c1 = '\0';
-+ register unsigned char c2 = '\0';
-+
-+ while (len > 0) {
-+ c1 = (unsigned char) *s1++;
-+ c2 = (unsigned char) *s2++;
-+ if (c1 == '\0' || c1 != c2)
-+ return c1 - c2;
-+ len--;
-+ }
-+
-+ return c1 - c2;
-+}
-+
-+static inline char * _dl_strchr(const char * str,int c)
-+{
-+ register char ch;
-+
-+ do {
-+ if ((ch = *str) == c)
-+ return (char *) str;
-+ str++;
-+ }
-+ while (ch);
-+
-+ return 0;
-+}
-+
-+static inline char *_dl_strrchr(const char *str, int c)
-+{
-+ register char *prev = 0;
-+ register char *ptr = (char *) str;
-+
-+ while (*ptr != '\0') {
-+ if (*ptr == c)
-+ prev = ptr;
-+ ptr++;
-+ }
-+ if (c == '\0')
-+ return(ptr);
-+ return(prev);
-+}
-+
-+
-+static inline char *_dl_strstr(const char *s1, const char *s2)
-+{
-+ register const char *s = s1;
-+ register const char *p = s2;
-+
-+ do {
-+ if (!*p) {
-+ return (char *) s1;;
-+ }
-+ if (*p == *s) {
-+ ++p;
-+ ++s;
-+ } else {
-+ p = s2;
-+ if (!*s) {
-+ return NULL;
-+ }
-+ s = ++s1;
-+ }
-+ } while (1);
-+}
-+
-+static inline void * _dl_memcpy(void * dst, const void * src, size_t len)
-+{
-+ register char *a = dst;
-+ register const char *b = src;
-+
-+ while (len--)
-+ *a++ = *b++;
-+
-+ return dst;
-+}
-+
-+
-+static inline int _dl_memcmp(const void * s1,const void * s2,size_t len)
-+{
-+ unsigned char *c1 = (unsigned char *)s1;
-+ unsigned char *c2 = (unsigned char *)s2;
-+
-+ while (len--) {
-+ if (*c1 != *c2)
-+ return *c1 - *c2;
-+ c1++;
-+ c2++;
-+ }
-+ return 0;
-+}
-+
-+static inline void * _dl_memset(void * str,int c,size_t len)
-+{
-+ register char *a = str;
-+
-+ while (len--)
-+ *a++ = c;
-+
-+ return str;
-+}
-+
-+static inline char *_dl_get_last_path_component(char *path)
-+{
-+ char *s;
-+ register char *ptr = path;
-+ register char *prev = 0;
-+
-+ while (*ptr)
-+ ptr++;
-+ s = ptr - 1;
-+
-+ /* strip trailing slashes */
-+ while (s != path && *s == '/') {
-+ *s-- = '\0';
-+ }
-+
-+ /* find last component */
-+ ptr = path;
-+ while (*ptr != '\0') {
-+ if (*ptr == '/')
-+ prev = ptr;
-+ ptr++;
-+ }
-+ s = prev;
-+
-+ if (s == NULL || s[1] == '\0')
-+ return path;
-+ else
-+ return s+1;
-+}
-+
-+/* Early on, we can't call printf, so use this to print out
-+ * numbers using the SEND_STDERR() macro */
-+static inline char *_dl_simple_ltoa(char * local, unsigned long i)
-+{
-+ /* 21 digits plus null terminator, good for 64-bit or smaller ints */
-+ char *p = &local[22];
-+ *p-- = '\0';
-+ do {
-+ *p-- = '0' + i % 10;
-+ i /= 10;
-+ } while (i > 0);
-+ return p + 1;
-+}
-+
-+static inline char *_dl_simple_ltoahex(char * local, unsigned long i)
-+{
-+ /* 21 digits plus null terminator, good for 64-bit or smaller ints */
-+ char *p = &local[22];
-+ *p-- = '\0';
-+ do {
-+ char temp = i % 0x10;
-+ if (temp <= 0x09)
-+ *p-- = '0' + temp;
-+ else
-+ *p-- = 'a' - 0x0a + temp;
-+ i /= 0x10;
-+ } while (i > 0);
-+ *p-- = 'x';
-+ *p-- = '0';
-+ return p + 1;
-+}
-+
-+
-+#if defined(mc68000) || defined(__arm__) || defined(__mips__) || defined(__sh__) || defined(__powerpc__)
-+/* On some arches constant strings are referenced through the GOT. */
-+/* XXX Requires load_addr to be defined. */
-+#define SEND_STDERR(X) \
-+ { const char *__s = (X); \
-+ if (__s < (const char *) load_addr) __s += load_addr; \
-+ _dl_write (2, __s, _dl_strlen (__s)); \
-+ }
-+#else
-+#define SEND_STDERR(X) _dl_write(2, X, _dl_strlen(X));
-+#endif
-+
-+#define SEND_ADDRESS_STDERR(X, add_a_newline) { \
-+ char tmp[22], *tmp1; \
-+ _dl_memset(tmp, 0, sizeof(tmp)); \
-+ tmp1=_dl_simple_ltoahex( tmp, (unsigned long)(X)); \
-+ _dl_write(2, tmp1, _dl_strlen(tmp1)); \
-+ if (add_a_newline) { \
-+ tmp[0]='\n'; \
-+ _dl_write(2, tmp, 1); \
-+ } \
-+};
-+
-+#define SEND_NUMBER_STDERR(X, add_a_newline) { \
-+ char tmp[22], *tmp1; \
-+ _dl_memset(tmp, 0, sizeof(tmp)); \
-+ tmp1=_dl_simple_ltoa( tmp, (unsigned long)(X)); \
-+ _dl_write(2, tmp1, _dl_strlen(tmp1)); \
-+ if (add_a_newline) { \
-+ tmp[0]='\n'; \
-+ _dl_write(2, tmp, 1); \
-+ } \
-+};
-+
-+
-+#endif
-diff -urN uClibc/ldso-0.9.24/include/ld_syscall.h uClibc.ldso.24/ldso-0.9.24/include/ld_syscall.h
---- uClibc/ldso-0.9.24/include/ld_syscall.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/ld_syscall.h 2003-08-19 01:05:30.000000000 -0500
-@@ -0,0 +1,157 @@
-+#ifndef _LD_SYSCALL_H_
-+#define _LD_SYSCALL_H_
-+
-+/* Pull in the arch specific syscall implementation */
-+#include <ld_syscalls.h>
-+/* For MAP_ANONYMOUS -- differs between platforms */
-+#include <asm/mman.h>
-+/* Pull in whatever this particular arch's kernel thinks the kernel version of
-+ * struct stat should look like. It turns out that each arch has a different
-+ * opinion on the subject, and different kernel revs use different names... */
-+#define kernel_stat stat
-+#include <bits/kernel_stat.h>
-+
-+
-+/* Encoding of the file mode. */
-+#define S_IFMT 0170000 /* These bits determine file type. */
-+
-+/* File types. */
-+#define S_IFDIR 0040000 /* Directory. */
-+#define S_IFCHR 0020000 /* Character device. */
-+#define S_IFBLK 0060000 /* Block device. */
-+#define S_IFREG 0100000 /* Regular file. */
-+#define S_IFIFO 0010000 /* FIFO. */
-+#define S_IFLNK 0120000 /* Symbolic link. */
-+#define S_IFSOCK 0140000 /* Socket. */
-+
-+/* Protection bits. */
-+
-+#define S_ISUID 04000 /* Set user ID on execution. */
-+#define S_ISGID 02000 /* Set group ID on execution. */
-+#define S_ISVTX 01000 /* Save swapped text after use (sticky). */
-+#define S_IREAD 0400 /* Read by owner. */
-+#define S_IWRITE 0200 /* Write by owner. */
-+#define S_IEXEC 0100 /* Execute by owner. */
-+
-+
-+/* Here are the definitions for some syscalls that are used
-+ by the dynamic linker. The idea is that we want to be able
-+ to call these before the errno symbol is dynamicly linked, so
-+ we use our own version here. Note that we cannot assume any
-+ dynamic linking at all, so we cannot return any error codes.
-+ We just punt if there is an error. */
-+
-+
-+#define __NR__dl_exit __NR_exit
-+static inline _syscall1(void, _dl_exit, int, status);
-+
-+
-+#define __NR__dl_close __NR_close
-+static inline _syscall1(int, _dl_close, int, fd);
-+
-+
-+#if defined(__powerpc__) || defined(__mips__) || defined(__sh__)
-+/* PowerPC, MIPS and SuperH have a different calling convention for mmap(). */
-+#define __NR__dl_mmap __NR_mmap
-+static inline _syscall6(void *, _dl_mmap, void *, start, size_t, length,
-+ int, prot, int, flags, int, fd, off_t, offset);
-+#else
-+#define __NR__dl_mmap_real __NR_mmap
-+static inline _syscall1(void *, _dl_mmap_real, unsigned long *, buffer);
-+
-+static inline void * _dl_mmap(void * addr, unsigned long size, int prot,
-+ int flags, int fd, unsigned long offset)
-+{
-+ unsigned long buffer[6];
-+
-+ buffer[0] = (unsigned long) addr;
-+ buffer[1] = (unsigned long) size;
-+ buffer[2] = (unsigned long) prot;
-+ buffer[3] = (unsigned long) flags;
-+ buffer[4] = (unsigned long) fd;
-+ buffer[5] = (unsigned long) offset;
-+ return (void *) _dl_mmap_real(buffer);
-+}
-+#endif
-+
-+#ifndef _dl_MAX_ERRNO
-+#define _dl_MAX_ERRNO 4096
-+#endif
-+#define _dl_mmap_check_error(__res) \
-+ (((int)__res) < 0 && ((int)__res) >= -_dl_MAX_ERRNO)
-+#ifndef MAP_ANONYMOUS
-+#ifdef __sparc__
-+#define MAP_ANONYMOUS 0x20
-+#else
-+#error MAP_ANONYMOUS not defined and suplementary value not known
-+#endif
-+#endif
-+
-+
-+#define __NR__dl_open __NR_open
-+#define O_RDONLY 0x0000
-+#define O_WRONLY 01
-+#define O_RDWR 02
-+#define O_CREAT 0100 /* not fcntl */
-+static inline _syscall2(int, _dl_open, const char *, fn, int, flags);
-+
-+#define __NR__dl_write __NR_write
-+static inline _syscall3(unsigned long, _dl_write, int, fd,
-+ const void *, buf, unsigned long, count);
-+
-+
-+#define __NR__dl_read __NR_read
-+static inline _syscall3(unsigned long, _dl_read, int, fd,
-+ const void *, buf, unsigned long, count);
-+
-+#define __NR__dl_mprotect __NR_mprotect
-+static inline _syscall3(int, _dl_mprotect, const void *, addr, unsigned long, len, int, prot);
-+
-+
-+
-+#define __NR__dl_stat __NR_stat
-+static inline _syscall2(int, _dl_stat, const char *, file_name, struct stat *, buf);
-+
-+
-+#define __NR__dl_munmap __NR_munmap
-+static inline _syscall2(int, _dl_munmap, void *, start, unsigned long, length);
-+
-+#define __NR__dl_getuid __NR_getuid
-+static inline _syscall0(uid_t, _dl_getuid);
-+
-+#define __NR__dl_geteuid __NR_geteuid
-+static inline _syscall0(uid_t, _dl_geteuid);
-+
-+#define __NR__dl_getgid __NR_getgid
-+static inline _syscall0(gid_t, _dl_getgid);
-+
-+#define __NR__dl_getegid __NR_getegid
-+static inline _syscall0(gid_t, _dl_getegid);
-+
-+#define __NR__dl_getpid __NR_getpid
-+static inline _syscall0(gid_t, _dl_getpid);
-+
-+/*
-+ * Not an actual syscall, but we need something in assembly to say whether
-+ * this is OK or not.
-+ */
-+static inline int _dl_suid_ok(void)
-+{
-+ uid_t uid, euid, gid, egid;
-+
-+ uid = _dl_getuid();
-+ euid = _dl_geteuid();
-+ gid = _dl_getgid();
-+ egid = _dl_getegid();
-+
-+ if(uid == euid && gid == egid)
-+ return 1;
-+ else
-+ return 0;
-+}
-+
-+#define __NR__dl_readlink __NR_readlink
-+static inline _syscall3(int, _dl_readlink, const char *, path, char *, buf, size_t, bufsiz);
-+
-+#endif /* _LD_SYSCALL_H_ */
-+
-diff -urN uClibc/ldso-0.9.24/include/ldso.h uClibc.ldso.24/ldso-0.9.24/include/ldso.h
---- uClibc/ldso-0.9.24/include/ldso.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/include/ldso.h 2003-08-19 01:05:30.000000000 -0500
-@@ -0,0 +1,11 @@
-+#include <features.h>
-+/* Pull in compiler and arch stuff */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+/* Pull in the arch specific type information */
-+#include <sys/types.h>
-+/* Now the ldso specific headers */
-+#include <ld_elf.h>
-+#include <ld_syscall.h>
-+#include <ld_hash.h>
-+#include <ld_string.h>
-diff -urN uClibc/ldso-0.9.24/ldso/.cvsignore uClibc.ldso.24/ldso-0.9.24/ldso/.cvsignore
---- uClibc/ldso-0.9.24/ldso/.cvsignore 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/.cvsignore 2003-08-19 01:05:31.000000000 -0500
-@@ -0,0 +1,2 @@
-+ld-uclibc.so*
-+_dl_progname.h
-diff -urN uClibc/ldso-0.9.24/ldso/Makefile uClibc.ldso.24/ldso-0.9.24/ldso/Makefile
---- uClibc/ldso-0.9.24/ldso/Makefile 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/Makefile 2004-03-01 02:58:58.000000000 -0600
-@@ -0,0 +1,101 @@
-+# Makefile for uClibc
-+#
-+# Copyright (C) 2000 by Lineo, inc.
-+# Copyright (C) 2000-2002 Erik Andersen <andersen@uclibc.org>
-+#
-+# This program is free software; you can redistribute it and/or modify it under
-+# the terms of the GNU Library General Public License as published by the Free
-+# Software Foundation; either version 2 of the License, or (at your option) any
-+# later version.
-+#
-+# This program is distributed in the hope that it will be useful, but WITHOUT
-+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-+# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-+# details.
-+#
-+# You should have received a copy of the GNU Library General Public License
-+# along with this program; if not, write to the Free Software Foundation, Inc.,
-+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+#
-+# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-+# other sundry sources. Files within this library are copyright by their
-+# respective copyright holders.
-+
-+
-+TOPDIR=../../
-+include $(TOPDIR)Rules.mak
-+LDSO_FULLNAME=ld-uClibc-$(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL).so
-+
-+
-+XXFLAGS=$(XWARNINGS) $(OPTIMIZATION) $(XARCH_CFLAGS) $(CPU_CFLAGS) $(PICFLAG) \
-+ -DUCLIBC_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
-+ -fno-builtin -nostdinc -I$(TOPDIR)ldso-0.9.24/include -I. -I$(TOPDIR)include
-+
-+ifeq ($(SUPPORT_LD_DEBUG),y)
-+XXFLAGS=$(XWARNINGS) $(XARCH_CFLAGS) $(CPU_CFLAGS) $(PICFLAG) \
-+ -DUCLIBC_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
-+ -fno-builtin -nostdinc -I$(TOPDIR)ldso-0.9.24/include -I. -I$(TOPDIR)include
-+# Not really much point in including debugging info, since gdb
-+# can't really debug ldso, since gdb requires help from ldso to
-+# debug things....
-+XXFLAGS+=-Os #-g3
-+endif
-+
-+# BEWARE!!! At least mips* will die if -O0 is used!!!
-+XXFLAGS :=$(XXFLAGS:-O0=-O1)
-+
-+XXFLAGS+=$(shell $(CC) -print-search-dirs | sed -ne "s/install: *\(.*\)/-I\1include/gp")
-+LDFLAGS=$(CPU_LDFLAGS-y) -shared --warn-common --export-dynamic --sort-common \
-+ -z combreloc --discard-locals --discard-all --no-undefined
-+
-+CSRC= ldso.c #hash.c readelflib1.c $(TARGET_ARCH)/elfinterp.c
-+COBJS=$(patsubst %.c,%.o, $(CSRC))
-+ASRC=$(shell ls $(TARGET_ARCH)/*.S)
-+AOBJS=$(patsubst %.S,%.o, $(ASRC))
-+OBJS=$(AOBJS) $(COBJS)
-+
-+ifneq ($(strip $(SUPPORT_LD_DEBUG)),y)
-+LDFLAGS+=-s
-+endif
-+
-+ifeq ($(strip $(SUPPORT_LD_DEBUG)),y)
-+XXFLAGS+=-D__SUPPORT_LD_DEBUG__
-+endif
-+
-+ifeq ($(strip $(SUPPORT_LD_DEBUG_EARLY)),y)
-+XXFLAGS+=-D__SUPPORT_LD_DEBUG_EARLY__
-+endif
-+
-+ifeq ($(strip $(FORCE_SHAREABLE_TEXT_SEGMENTS)),y)
-+XXFLAGS+=-DFORCE_SHAREABLE_TEXT_SEGMENTS
-+endif
-+
-+#This stuff will not work with -fomit-frame-pointer
-+XXFLAGS := $(XXFLAGS:-fomit-frame-pointer=)
-+
-+all: lib
-+
-+lib:: _dl_progname.h $(OBJS) $(DLINK_OBJS)
-+ $(LD) $(LDFLAGS) -e _dl_boot -soname=$(UCLIBC_LDSO) \
-+ -o $(LDSO_FULLNAME) $(OBJS) $(LIBGCC);
-+ $(INSTALL) -d $(TOPDIR)lib
-+ $(INSTALL) -m 755 $(LDSO_FULLNAME) $(TOPDIR)lib
-+ $(LN) -sf $(LDSO_FULLNAME) $(TOPDIR)lib/$(UCLIBC_LDSO)
-+
-+_dl_progname.h: Makefile
-+ echo "const char *_dl_progname=\""$(UCLIBC_LDSO)"\";" > _dl_progname.h
-+ echo "#include \"$(TARGET_ARCH)/elfinterp.c\"" >> _dl_progname.h
-+
-+
-+$(COBJS): %.o : %.c
-+ $(CC) $(XXFLAGS) -I../libdl -c $< -o $@
-+ $(STRIPTOOL) -x -R .note -R .comment $*.o
-+
-+$(AOBJS): %.o : %.S
-+ $(CC) $(XXFLAGS) -I../libdl -c $< -o $@
-+ $(STRIPTOOL) -x -R .note -R .comment $*.o
-+
-+ldso.o: ldso.c hash.c readelflib1.c $(TARGET_ARCH)/elfinterp.c _dl_progname.h
-+
-+clean:
-+ $(RM) $(UCLIBC_LDSO)* $(OBJS) $(LDSO_FULLNAME)* core *.o *.a *.s *.i _dl_progname.h ldso.h *~
-diff -urN uClibc/ldso-0.9.24/ldso/arm/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/arm/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/arm/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/arm/boot1_arch.h 2002-11-13 18:53:49.000000000 -0600
-@@ -0,0 +1,30 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture. */
-+
-+/* Overrive the default _dl_boot function, and replace it with a bit of asm.
-+ * Then call the real _dl_boot function, which is now named _dl_boot2. */
-+
-+asm("" \
-+" .text\n" \
-+" .globl _dl_boot\n" \
-+"_dl_boot:\n" \
-+" mov r7, sp\n" \
-+" @ldr r0, [sp], #4\n" \
-+" mov r0, sp\n" \
-+" bl _dl_boot2\n" \
-+" mov r6, r0\n" \
-+" mov r0, r7\n" \
-+" mov pc, r6\n" \
-+);
-+
-+#define _dl_boot _dl_boot2
-+#define LD_BOOT(X) static void * __attribute__ ((unused)) _dl_boot (X)
-+
-+
-+ /* It seems ARM needs an offset here */
-+#undef ELFMAGIC
-+#define ELFMAGIC ELFMAG+load_addr
-+
-+
-+
-diff -urN uClibc/ldso-0.9.24/ldso/arm/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/arm/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/arm/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/arm/elfinterp.c 2002-11-07 21:20:59.000000000 -0600
-@@ -0,0 +1,462 @@
-+/* vi: set sw=4 ts=4: */
-+/* ARM ELF shared library loader suppport
-+ *
-+ * Copyright (C) 2001-2002, Erik Andersen
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes_tab[] =
-+{
-+ [0] "R_ARM_NONE", "R_ARM_PC24", "R_ARM_ABS32", "R_ARM_REL32",
-+ [4] "R_ARM_PC13", "R_ARM_ABS16", "R_ARM_ABS12", "R_ARM_THM_ABS5",
-+ [8] "R_ARM_ABS8", "R_ARM_SBREL32","R_ARM_THM_PC22", "R_ARM_THM_PC8",
-+ [12] "R_ARM_AMP_VCALL9", "R_ARM_SWI24", "R_ARM_THM_SWI8", "R_ARM_XPC25",
-+ [16] "R_ARM_THM_XPC22",
-+ [20] "R_ARM_COPY", "R_ARM_GLOB_DAT","R_ARM_JUMP_SLOT", "R_ARM_RELATIVE",
-+ [24] "R_ARM_GOTOFF", "R_ARM_GOTPC", "R_ARM_GOT32", "R_ARM_PLT32",
-+ [32] "R_ARM_ALU_PCREL_7_0","R_ARM_ALU_PCREL_15_8","R_ARM_ALU_PCREL_23_15","R_ARM_LDR_SBREL_11_0",
-+ [36] "R_ARM_ALU_SBREL_19_12","R_ARM_ALU_SBREL_27_20",
-+ [100] "R_ARM_GNU_VTENTRY","R_ARM_GNU_VTINHERIT","R_ARM_THM_PC11","R_ARM_THM_PC9",
-+ [249] "R_ARM_RXPC25", "R_ARM_RSBREL32", "R_ARM_THM_RPC22", "R_ARM_RREL32",
-+ [253] "R_ARM_RABS22", "R_ARM_RPC24", "R_ARM_RBASE",
-+};
-+
-+static const char *
-+_dl_reltypes(int type)
-+{
-+ static char buf[22];
-+ const char *str;
-+
-+ if (type >= (sizeof (_dl_reltypes_tab)/sizeof(_dl_reltypes_tab[0])) ||
-+ NULL == (str = _dl_reltypes_tab[type]))
-+ {
-+ str =_dl_simple_ltoa( buf, (unsigned long)(type));
-+ }
-+ return str;
-+}
-+
-+static
-+void debug_sym(Elf32_Sym *symtab,char *strtab,int symtab_index)
-+{
-+ if(_dl_debug_symbols)
-+ {
-+ if(symtab_index){
-+ _dl_dprintf(_dl_debug_file, "\n%s\tvalue=%x\tsize=%x\tinfo=%x\tother=%x\tshndx=%x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_value,
-+ symtab[symtab_index].st_size,
-+ symtab[symtab_index].st_info,
-+ symtab[symtab_index].st_other,
-+ symtab[symtab_index].st_shndx);
-+ }
-+ }
-+}
-+
-+static void debug_reloc(Elf32_Sym *symtab,char *strtab, ELF_RELOC *rpnt)
-+{
-+ if(_dl_debug_reloc)
-+ {
-+ int symtab_index;
-+ const char *sym;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ sym = symtab_index ? strtab + symtab[symtab_index].st_name : "sym=0x0";
-+
-+#ifdef ELF_USES_RELOCA
-+ _dl_dprintf(_dl_debug_file, "\n%s\toffset=%x\taddend=%x %s",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ rpnt->r_addend,
-+ sym);
-+#else
-+ _dl_dprintf(_dl_debug_file, "\n%s\toffset=%x %s",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ sym);
-+#endif
-+ }
-+}
-+#endif
-+
-+/* Program to load an ELF binary on a linux system, and run it.
-+ References to symbols in sharable libraries can be resolved by either
-+ an ELF sharable library or a linux style of shared library. */
-+
-+/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
-+ I ever taken any courses on internals. This program was developed using
-+ information available through the book "UNIX SYSTEM V RELEASE 4,
-+ Programmers guide: Ansi C and Programming Support Tools", which did
-+ a more than adequate job of explaining everything required to get this
-+ working. */
-+
-+extern int _dl_linux_resolve(void);
-+
-+unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
-+{
-+ int reloc_type;
-+ ELF_RELOC *this_reloc;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rel_addr;
-+ int symtab_index;
-+ char *new_addr;
-+ char **got_addr;
-+ unsigned long instr_addr;
-+
-+ rel_addr = (ELF_RELOC *) (tpnt->dynamic_info[DT_JMPREL] + tpnt->loadaddr);
-+
-+ this_reloc = rel_addr + (reloc_entry >> 3);
-+ reloc_type = ELF32_R_TYPE(this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM(this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+
-+ if (reloc_type != R_ARM_JUMP_SLOT) {
-+ _dl_dprintf(2, "%s: Incorrect relocation type in jump relocations\n",
-+ _dl_progname);
-+ _dl_exit(1);
-+ };
-+
-+ /* Address of jump instruction to fix up */
-+ instr_addr = ((unsigned long) this_reloc->r_offset +
-+ (unsigned long) tpnt->loadaddr);
-+ got_addr = (char **) instr_addr;
-+
-+ /* Get the address of the GOT entry */
-+ new_addr = _dl_find_hash(strtab + symtab[symtab_index].st_name,
-+ tpnt->symbol_scope, tpnt, resolver);
-+ if (!new_addr) {
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ _dl_exit(1);
-+ };
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if ((unsigned long) got_addr < 0x40000000)
-+ {
-+ if (_dl_debug_bindings)
-+ {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s",
-+ strtab + symtab[symtab_index].st_name);
-+ if(_dl_debug_detail) _dl_dprintf(_dl_debug_file,
-+ "\tpatch %x ==> %x @ %x", *got_addr, new_addr, got_addr);
-+ }
-+ }
-+ if (!_dl_debug_nofixups) {
-+ *got_addr = new_addr;
-+ }
-+#else
-+ *got_addr = new_addr;
-+#endif
-+
-+ return (unsigned long) new_addr;
-+}
-+
-+static int
-+_dl_parse(struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ unsigned long rel_addr, unsigned long rel_size,
-+ int (*reloc_fnc) (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab))
-+{
-+ int i;
-+ char *strtab;
-+ int goof = 0;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rpnt;
-+ int symtab_index;
-+ /* Now parse the relocation information */
-+
-+ rpnt = (ELF_RELOC *) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof(ELF_RELOC);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++) {
-+ int res;
-+
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+
-+ /* When the dynamic linker bootstrapped itself, it resolved some symbols.
-+ Make sure we do not do them again */
-+ if (!symtab_index && tpnt->libtype == program_interpreter)
-+ continue;
-+ if (symtab_index && tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab,strtab,symtab_index);
-+ debug_reloc(symtab,strtab,rpnt);
-+#endif
-+
-+ res = reloc_fnc (tpnt, scope, rpnt, symtab, strtab);
-+
-+ if (res==0) continue;
-+
-+ _dl_dprintf(2, "\n%s: ",_dl_progname);
-+
-+ if (symtab_index)
-+ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
-+
-+ if (res <0)
-+ {
-+ int reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "can't handle reloc type %s\n ", _dl_reltypes(reloc_type));
-+#else
-+ _dl_dprintf(2, "can't handle reloc type %x\n", reloc_type);
-+#endif
-+ _dl_exit(-res);
-+ }
-+ else if (res >0)
-+ {
-+ _dl_dprintf(2, "can't resolve symbol\n");
-+ goof += res;
-+ }
-+ }
-+ return goof;
-+}
-+
-+static unsigned long
-+fix_bad_pc24 (unsigned long *const reloc_addr, unsigned long value)
-+{
-+ static void *fix_page;
-+ static unsigned int fix_offset;
-+ unsigned int *fix_address;
-+ if (! fix_page)
-+ {
-+ fix_page = _dl_mmap (NULL, 4096 , PROT_READ | PROT_WRITE | PROT_EXEC,
-+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-+ fix_offset = 0;
-+ }
-+
-+ fix_address = (unsigned int *)(fix_page + fix_offset);
-+ fix_address[0] = 0xe51ff004; /* ldr pc, [pc, #-4] */
-+ fix_address[1] = value;
-+
-+ fix_offset += 8;
-+ if (fix_offset >= 4096)
-+ fix_page = NULL;
-+
-+ return (unsigned long)fix_address;
-+}
-+
-+static int
-+_dl_do_reloc (struct elf_resolve *tpnt,struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+ int goof = 0;
-+
-+ reloc_addr = (unsigned long *) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+
-+ if (symtab_index) {
-+
-+ symbol_addr = (unsigned long) _dl_find_hash(strtab + symtab[symtab_index].st_name,
-+ scope, (reloc_type == R_ARM_JUMP_SLOT ? tpnt : NULL), symbolrel);
-+
-+ /*
-+ * We want to allow undefined references to weak symbols - this might
-+ * have been intentional. We should not be linking local symbols
-+ * here, so all bases should be covered.
-+ */
-+ if (!symbol_addr && ELF32_ST_BIND(symtab[symtab_index].st_info) == STB_GLOBAL) {
-+ goof++;
-+ }
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ {
-+ unsigned long old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_ARM_NONE:
-+ break;
-+ case R_ARM_ABS32:
-+ *reloc_addr += symbol_addr;
-+ break;
-+ case R_ARM_PC24:
-+ {
-+ unsigned long addend;
-+ long newvalue, topbits;
-+
-+ addend = *reloc_addr & 0x00ffffff;
-+ if (addend & 0x00800000) addend |= 0xff000000;
-+
-+ newvalue = symbol_addr - (unsigned long)reloc_addr + (addend << 2);
-+ topbits = newvalue & 0xfe000000;
-+ if (topbits != 0xfe000000 && topbits != 0x00000000)
-+ {
-+ newvalue = fix_bad_pc24(reloc_addr, symbol_addr)
-+ - (unsigned long)reloc_addr + (addend << 2);
-+ topbits = newvalue & 0xfe000000;
-+ if (topbits != 0xfe000000 && topbits != 0x00000000)
-+ {
-+ _dl_dprintf(2,"symbol '%s': R_ARM_PC24 relocation out of range.",
-+ symtab[symtab_index].st_name);
-+ _dl_exit(1);
-+ }
-+ }
-+ newvalue >>= 2;
-+ symbol_addr = (*reloc_addr & 0xff000000) | (newvalue & 0x00ffffff);
-+ *reloc_addr = symbol_addr;
-+ break;
-+ }
-+ case R_ARM_GLOB_DAT:
-+ case R_ARM_JUMP_SLOT:
-+ *reloc_addr = symbol_addr;
-+ break;
-+ case R_ARM_RELATIVE:
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ break;
-+ case R_ARM_COPY:
-+#if 0
-+ /* Do this later */
-+ _dl_dprintf(2, "Doing copy for symbol ");
-+ if (symtab_index) _dl_dprintf(2, strtab + symtab[symtab_index].st_name);
-+ _dl_dprintf(2, "\n");
-+ _dl_memcpy((void *) symtab[symtab_index].st_value,
-+ (void *) symbol_addr, symtab[symtab_index].st_size);
-+#endif
-+ break;
-+ default:
-+ return -1; /*call _dl_exit(1) */
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatch: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+ }
-+
-+#endif
-+
-+ return goof;
-+}
-+
-+static int
-+_dl_do_lazy_reloc (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ unsigned long *reloc_addr;
-+
-+ reloc_addr = (unsigned long *) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ {
-+ unsigned long old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_ARM_NONE:
-+ break;
-+ case R_ARM_JUMP_SLOT:
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ break;
-+ default:
-+ return -1; /*call _dl_exit(1) */
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatch: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+ }
-+
-+#endif
-+ return 0;
-+
-+}
-+
-+/* This is done as a separate step, because there are cases where
-+ information is first copied and later initialized. This results in
-+ the wrong information being copied. Someone at Sun was complaining about
-+ a bug in the handling of _COPY by SVr4, and this may in fact be what he
-+ was talking about. Sigh. */
-+
-+/* No, there are cases where the SVr4 linker fails to emit COPY relocs
-+ at all */
-+static int
-+_dl_do_copy (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+ int goof = 0;
-+
-+ reloc_addr = (unsigned long *) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ if (reloc_type != R_ARM_COPY)
-+ return 0;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+
-+ if (symtab_index) {
-+
-+ symbol_addr = (unsigned long) _dl_find_hash(strtab +
-+ symtab[symtab_index].st_name, scope,
-+ NULL, copyrel);
-+ if (!symbol_addr) goof++;
-+ }
-+ if (!goof) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_move)
-+ _dl_dprintf(_dl_debug_file,"\n%s move %x bytes from %x to %x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_size,
-+ symbol_addr, symtab[symtab_index].st_value);
-+#endif
-+ _dl_memcpy((char *) symtab[symtab_index].st_value,
-+ (char *) symbol_addr, symtab[symtab_index].st_size);
-+ }
-+
-+ return goof;
-+}
-+
-+void _dl_parse_lazy_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void)_dl_parse(tpnt, NULL, rel_addr, rel_size, _dl_do_lazy_reloc);
-+}
-+
-+int _dl_parse_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ return _dl_parse(tpnt, tpnt->symbol_scope, rel_addr, rel_size, _dl_do_reloc);
-+}
-+
-+int _dl_parse_copy_information(struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ return _dl_parse(xpnt->dyn, xpnt->next, rel_addr, rel_size, _dl_do_copy);
-+}
-+
-diff -urN uClibc/ldso-0.9.24/ldso/arm/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/arm/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/arm/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/arm/ld_syscalls.h 2003-09-09 01:11:11.000000000 -0500
-@@ -0,0 +1,19 @@
-+/* Define the __set_errno macro as nothing so that INLINE_SYSCALL
-+ * won't set errno, which is important since we make system calls
-+ * before the errno symbol is dynamicly linked. */
-+
-+#define __set_errno(X) {(void)(X);}
-+
-+/* Prepare for the case that `__builtin_expect' is not available. */
-+#if __GNUC__ == 2 && __GNUC_MINOR__ < 96
-+#define __builtin_expect(x, expected_value) (x)
-+#endif
-+#ifndef likely
-+# define likely(x) __builtin_expect((!!(x)),1)
-+#endif
-+#ifndef unlikely
-+# define unlikely(x) __builtin_expect((!!(x)),0)
-+#endif
-+
-+#include "sys/syscall.h"
-+
-diff -urN uClibc/ldso-0.9.24/ldso/arm/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/arm/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/arm/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/arm/ld_sysdep.h 2002-08-09 09:41:04.000000000 -0500
-@@ -0,0 +1,124 @@
-+/*
-+ * Various assmbly language/system dependent hacks that are required
-+ * so that we can minimize the amount of platform specific code.
-+ */
-+
-+/*
-+ * Define this if the system uses RELOCA.
-+ */
-+#undef ELF_USES_RELOCA
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long*) ARGS)
-+
-+/*
-+ * Initialization sequence for a GOT.
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+{ \
-+ GOT_BASE[2] = (unsigned long) _dl_linux_resolve; \
-+ GOT_BASE[1] = (unsigned long) MODULE; \
-+}
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader. RELP is the relocation that we
-+ * are performing, REL is the pointer to the address we are relocating.
-+ * SYMBOL is the symbol involved in the relocation, and LOAD is the
-+ * load address.
-+ */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ switch(ELF32_R_TYPE((RELP)->r_info)){ \
-+ case R_ARM_ABS32: \
-+ *REL += SYMBOL; \
-+ break; \
-+ case R_ARM_PC24: \
-+ { long newvalue, topbits; \
-+ unsigned long addend = *REL & 0x00ffffff; \
-+ if (addend & 0x00800000) addend |= 0xff000000; \
-+ newvalue=SYMBOL-(unsigned long)REL+(addend<<2); \
-+ topbits = newvalue & 0xfe000000; \
-+ if (topbits!=0xfe000000&&topbits!=0x00000000){ \
-+ newvalue = fix_bad_pc24(REL, SYMBOL) \
-+ -(unsigned long)REL+(addend<<2); \
-+ topbits = newvalue & 0xfe000000; \
-+ if (topbits!=0xfe000000&&topbits!=0x00000000){ \
-+ SEND_STDERR("R_ARM_PC24 relocation out of range\n");\
-+ _dl_exit(1); } } \
-+ newvalue>>=2; \
-+ SYMBOL=(*REL&0xff000000)|(newvalue & 0x00ffffff); \
-+ *REL=SYMBOL; \
-+ } \
-+ break; \
-+ case R_ARM_GLOB_DAT: \
-+ case R_ARM_JUMP_SLOT: \
-+ *REL = SYMBOL; \
-+ break; \
-+ case R_ARM_RELATIVE: \
-+ *REL += (unsigned long) LOAD; \
-+ break; \
-+ case R_ARM_NONE: \
-+ break; \
-+ default: \
-+ SEND_STDERR("Aiieeee!"); \
-+ _dl_exit(1); \
-+ }
-+
-+
-+/*
-+ * Transfer control to the user's application, once the dynamic loader
-+ * is done. This routine has to exit the current function, then
-+ * call the _dl_elf_main function.
-+ */
-+
-+#define START() return _dl_elf_main;
-+
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+
-+#define MAGIC1 EM_ARM
-+#undef MAGIC2
-+/* Used for error messages */
-+#define ELF_TARGET "ARM"
-+
-+struct elf_resolve;
-+unsigned long _dl_linux_resolver(struct elf_resolve * tpnt, int reloc_entry);
-+
-+static inline unsigned long arm_modulus(unsigned long m, unsigned long p) {
-+ unsigned long i,t,inc;
-+ i=p; t=0;
-+ while(!(i&(1<<31))) {
-+ i<<=1;
-+ t++;
-+ }
-+ t--;
-+ for(inc=t;inc>2;inc--) {
-+ i=p<<inc;
-+ if(i&(1<<31))
-+ break;
-+ while(m>=i) {
-+ m-=i;
-+ i<<=1;
-+ if(i&(1<<31))
-+ break;
-+ if(i<p)
-+ break;
-+ }
-+ }
-+ while(m>=p) {
-+ m-=p;
-+ }
-+ return m;
-+}
-+
-+#define do_rem(result, n, base) result=arm_modulus(n,base);
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/arm/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/arm/resolve.S
---- uClibc/ldso-0.9.24/ldso/arm/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/arm/resolve.S 2002-08-12 04:03:30.000000000 -0500
-@@ -0,0 +1,43 @@
-+/*
-+ * This function is _not_ called directly. It is jumped to (so no return
-+ * address is on the stack) when attempting to use a symbol that has not yet
-+ * been resolved. The first time a jump symbol (such as a function call inside
-+ * a shared library) is used (before it gets resolved) it will jump here to
-+ * _dl_linux_resolve. When we get called the stack looks like this:
-+ * reloc_entry
-+ * tpnt
-+ *
-+ * This function saves all the registers, puts a copy of reloc_entry and tpnt
-+ * on the stack (as function arguments) then make the function call
-+ * _dl_linux_resolver(tpnt, reloc_entry). _dl_linux_resolver() figures out
-+ * where the jump symbol is _really_ supposed to have jumped to and returns
-+ * that to us. Once we have that, we overwrite tpnt with this fixed up
-+ * address. We then clean up after ourselves, put all the registers back how we
-+ * found them, then we jump to the fixed up address, which is where the jump
-+ * symbol that got us here really wanted to jump to in the first place.
-+ * -Erik Andersen
-+ */
-+
-+#define sl r10
-+#define fp r11
-+#define ip r12
-+
-+.text
-+.globl _dl_linux_resolve
-+.type _dl_linux_resolve,%function
-+.align 4;
-+
-+_dl_linux_resolve:
-+ stmdb sp!, {r0, r1, r2, r3, sl, fp}
-+ sub r1, ip, lr
-+ sub r1, r1, #4
-+ add r1, r1, r1
-+ ldr r0, [lr, #-4]
-+ mov r3,r0
-+
-+ bl _dl_linux_resolver
-+
-+ mov ip, r0
-+ ldmia sp!, {r0, r1, r2, r3, sl, fp, lr}
-+ mov pc,ip
-+.size _dl_linux_resolve, .-_dl_linux_resolve
-diff -urN uClibc/ldso-0.9.24/ldso/cris/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/cris/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/cris/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/cris/boot1_arch.h 2003-09-19 07:11:43.000000000 -0500
-@@ -0,0 +1,17 @@
-+/*
-+ * This code fix the stack pointer so that the dynamic linker
-+ * can find argc, argv and auxvt (Auxillary Vector Table).
-+ */
-+asm("" \
-+" .text\n" \
-+" .globl _dl_boot\n" \
-+" .type _dl_boot,@function\n" \
-+"_dl_boot:\n" \
-+" move.d $sp,$r10\n" \
-+" move.d $pc,$r9\n" \
-+" add.d _dl_boot2 - ., $r9\n" \
-+" jsr $r9\n" \
-+);
-+
-+#define _dl_boot _dl_boot2
-+#define LD_BOOT(X) static void * __attribute__ ((unused)) _dl_boot(X)
-diff -urN uClibc/ldso-0.9.24/ldso/cris/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/cris/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/cris/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/cris/elfinterp.c 2003-09-30 06:51:11.000000000 -0500
-@@ -0,0 +1,414 @@
-+/*
-+ * CRIS ELF shared library loader support.
-+ *
-+ * Program to load an elf binary on a linux system, and run it.
-+ * References to symbols in sharable libraries can be resolved
-+ * by either an ELF sharable library or a linux style of shared
-+ * library.
-+ *
-+ * Copyright (C) 2002, Axis Communications AB
-+ * All rights reserved
-+ *
-+ * Author: Tobias Anderberg, <tobiasa@axis.com>
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+/* Support for the LD_DEBUG variable. */
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes_tab[] = {
-+ [0] "R_CRIS_NONE", "R_CRIS_8", "R_CRIS_16", "R_CRIS_32",
-+ [4] "R_CRIS_8_PCREL", "R_CRIS_16_PCREL", "R_CRIS_32_PCREL", "R_CRIS_GNU_VTINHERIT",
-+ [8] "R_CRIS_GNU_VTENTRY", "R_CRIS_COPY", "R_CRIS_GLOB_DAT", "R_CRIS_JUMP_SLOT",
-+ [16] "R_CRIS_RELATIVE", "R_CRIS_16_GOT", "R_CRIS_32_GOT", "R_CRIS_16_GOTPLT",
-+ [32] "R_CRIS_32_GOTPLT", "R_CRIS_32_GOTREL", "R_CRIS_32_PLT_GOTREL", "R_CRIS_32_PLT_PCREL",
-+
-+};
-+
-+
-+static const char *
-+_dl_reltypes(int type)
-+{
-+ const char *str;
-+ static char buf[22];
-+
-+ if (type >= (sizeof(_dl_reltypes_tab)/sizeof(_dl_reltypes_tab[0])) ||
-+ NULL == (str = _dl_reltypes_tab[type]))
-+ str = _dl_simple_ltoa(buf, (unsigned long) (type));
-+
-+ return str;
-+}
-+
-+static void
-+debug_sym(Elf32_Sym *symtab, char *strtab, int symtab_index)
-+{
-+ if (_dl_debug_symbols) {
-+ if (symtab_index) {
-+ _dl_dprintf(_dl_debug_file,
-+ "\n%s\tvalue=%x\tsize=%x\tinfo=%x\tother=%x\tshndx=%x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_value,
-+ symtab[symtab_index].st_size,
-+ symtab[symtab_index].st_info,
-+ symtab[symtab_index].st_other,
-+ symtab[symtab_index].st_shndx);
-+ }
-+ }
-+}
-+
-+static void
-+debug_reloc(Elf32_Sym *symtab, char *strtab, ELF_RELOC *rpnt)
-+{
-+ if (_dl_debug_reloc) {
-+ int symtab_index;
-+ const char *sym;
-+
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ sym = symtab_index ? strtab + symtab[symtab_index].st_name : "sym=0x0";
-+
-+ if (_dl_debug_symbols)
-+ _dl_dprintf(_dl_debug_file, "\n\t");
-+ else
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\t", sym);
-+
-+#ifdef ELF_USES_RELOCA
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\taddend=%x",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ rpnt->r_addend);
-+#else
-+ _dl_dprintf(_dl_debug_file, "%s\toffset%x\n",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset);
-+#endif
-+ }
-+}
-+#endif /* __SUPPORT_LD_DEBUG__ */
-+
-+/* Defined in resolve.S. */
-+extern int _dl_linux_resolv(void);
-+
-+unsigned long
-+_dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ char *strtab;
-+ char *symname;
-+ char *new_addr;
-+ char *rel_addr;
-+ char **got_addr;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *this_reloc;
-+ unsigned long instr_addr;
-+
-+ rel_addr = (char *) (tpnt->dynamic_info[DT_JMPREL] + tpnt->loadaddr);
-+
-+ this_reloc = (ELF_RELOC *) (intptr_t)(rel_addr + reloc_entry);
-+ reloc_type = ELF32_R_TYPE(this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM(this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *) (intptr_t)(tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *)(tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (reloc_type != R_CRIS_JUMP_SLOT) {
-+ _dl_dprintf(2, "%s: Incorrect relocation type for jump relocations.\n",
-+ _dl_progname);
-+ _dl_exit(1);
-+ }
-+
-+ /* Fetch the address of the jump instruction to fix up. */
-+ instr_addr = ((unsigned long) this_reloc->r_offset + (unsigned long) tpnt->loadaddr);
-+ got_addr = (char **) instr_addr;
-+
-+ /* Fetch the address of the GOT entry. */
-+ new_addr = _dl_find_hash(symname, tpnt->symbol_scope, tpnt, resolver);
-+
-+ if (!new_addr) {
-+ new_addr = _dl_find_hash(symname, NULL, NULL, resolver);
-+
-+ if (new_addr)
-+ return (unsigned long) new_addr;
-+
-+ _dl_dprintf(2, "%s: Can't resolv symbol '%s'\n", _dl_progname, symname);
-+ _dl_exit(1);
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if (_dl_debug_bindings) {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname);
-+
-+ if (_dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatch %x ==> %x @ %x", *got_addr, new_addr, got_addr);
-+ }
-+#endif
-+
-+ *got_addr = new_addr;
-+ return (unsigned long) new_addr;
-+}
-+
-+static int
-+_dl_parse(struct elf_resolve *tpnt, struct dyn_elf *scope, unsigned long rel_addr,
-+ unsigned long rel_size, int (*reloc_fnc)(struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab))
-+{
-+ int symtab_index;
-+ int res;
-+ unsigned int i;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rpnt;
-+
-+ /* Parse the relocation information. */
-+ rpnt = (ELF_RELOC *) (intptr_t) (rel_addr + tpnt->loadaddr);
-+ rel_size /= sizeof(ELF_RELOC);
-+
-+ symtab = (Elf32_Sym *) (intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++) {
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+
-+ /*
-+ * Make sure the same symbols that the linker resolved when it
-+ * bootstapped itself isn't resolved again.
-+ */
-+ if (!symtab_index && tpnt->libtype == program_interpreter)
-+ continue;
-+
-+ if (symtab_index && tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab, strtab, symtab_index);
-+ debug_reloc(symtab, strtab, rpnt);
-+#endif
-+
-+ /* Pass over to actual relocation function. */
-+ res = reloc_fnc(tpnt, scope, rpnt, symtab, strtab);
-+
-+ if (res == 0)
-+ continue;
-+
-+ _dl_dprintf(2, "\n%s: ", _dl_progname);
-+
-+ if (symtab_index)
-+ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
-+
-+ if (res < 0) {
-+ int reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "can't handle relocation type '%s'\n", _dl_reltypes(reloc_type));
-+#else
-+ _dl_dprintf(2, "can't handle relocation type %x\n", reloc_type);
-+#endif
-+ _dl_exit(-res);
-+ }
-+ else if (res > 0) {
-+ _dl_dprintf(2, "can't resolv symbol\n");
-+ return res;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+_dl_do_reloc(struct elf_resolve *tpnt, struct dyn_elf *scope, ELF_RELOC *rpnt,
-+ Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ char *symname;
-+ unsigned long *reloc_addr;
-+ unsigned symbol_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+
-+ reloc_addr = (unsigned long *)(intptr_t)(tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+ if (symtab[symtab_index].st_shndx != SHN_UNDEF &&
-+ ELF32_ST_BIND(symtab[symtab_index].st_info) == STB_LOCAL) {
-+ symbol_addr = (unsigned long) tpnt->loadaddr;
-+ }
-+ else {
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope,
-+ (reloc_type == R_CRIS_JUMP_SLOT ? tpnt : NULL), symbolrel);
-+ }
-+
-+ if (!symbol_addr && ELF32_ST_BIND(symtab[symtab_index].st_info) == STB_GLOBAL) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "\tglobal symbol '%s' already defined in '%s'\n",
-+ symname, tpnt->libname);
-+#endif
-+ return 0;
-+ }
-+
-+ symbol_addr += rpnt->r_addend;
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+
-+ switch (reloc_type) {
-+ case R_CRIS_NONE:
-+ break;
-+ case R_CRIS_GLOB_DAT:
-+ case R_CRIS_JUMP_SLOT:
-+ case R_CRIS_32:
-+ case R_CRIS_COPY:
-+ *reloc_addr = symbol_addr;
-+ break;
-+ case R_CRIS_RELATIVE:
-+ *reloc_addr = (unsigned long) tpnt->loadaddr + rpnt->r_addend;
-+ break;
-+ default:
-+ return -1; /* Call _dl_exit(1). */
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if (_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+
-+ return 0;
-+}
-+
-+static int
-+_dl_do_lazy_reloc(struct elf_resolve *tpnt, struct dyn_elf *scope, ELF_RELOC *rpnt,
-+ Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ unsigned long *reloc_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+
-+ /* Don't care about these, just keep the compiler happy. */
-+ (void) scope;
-+ (void) symtab;
-+ (void) strtab;
-+
-+ reloc_addr = (unsigned long *)(intptr_t)(tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+
-+ switch (reloc_type) {
-+ case R_CRIS_NONE:
-+ break;
-+ case R_CRIS_JUMP_SLOT:
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ break;
-+ default:
-+ return -1; /* Calls _dl_exit(1). */
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if (_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+
-+ return 0;
-+}
-+
-+static int
-+_dl_do_copy_reloc(struct elf_resolve *tpnt, struct dyn_elf *scope, ELF_RELOC *rpnt,
-+ Elf32_Sym *symtab, char *strtab)
-+{
-+ int goof;
-+ int reloc_type;
-+ int symtab_index;
-+ char *symname;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+ if (reloc_type != R_CRIS_COPY)
-+ return 0;
-+
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+ goof = 0;
-+
-+ if (symtab_index) {
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope, NULL, copyrel);
-+
-+ if (!symbol_addr)
-+ goof++;
-+ }
-+
-+ if (!goof) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if (_dl_debug_move)
-+ _dl_dprintf(_dl_debug_file, "\n%s move %x bytes from %x to %x",
-+ symname, symtab[symtab_index].st_size, symbol_addr, symtab[symtab_index].st_value);
-+#endif
-+ _dl_memcpy((char *) symtab[symtab_index].st_value,
-+ (char *) symbol_addr, symtab[symtab_index].st_size);
-+ }
-+
-+ return goof;
-+}
-+
-+/* External interface to the generic part of the dynamic linker. */
-+
-+int
-+_dl_parse_relocation_information(struct elf_resolve *tpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ /* Keep the compiler happy. */
-+ (void) type;
-+ return _dl_parse(tpnt, tpnt->symbol_scope, rel_addr, rel_size, _dl_do_reloc);
-+}
-+void
-+_dl_parse_lazy_relocation_information(struct elf_resolve *tpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ /* Keep the compiler happy. */
-+ (void) type;
-+ _dl_parse(tpnt, NULL, rel_addr, rel_size, _dl_do_lazy_reloc);
-+}
-+
-+int
-+_dl_parse_copy_information(struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ /* Keep the compiler happy. */
-+ (void) type;
-+ return _dl_parse(xpnt->dyn, xpnt->next, rel_addr, rel_size, _dl_do_copy_reloc);
-+}
-diff -urN uClibc/ldso-0.9.24/ldso/cris/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/cris/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/cris/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/cris/ld_syscalls.h 2002-09-23 05:37:16.000000000 -0500
-@@ -0,0 +1,7 @@
-+/*
-+ * Define the __set_errno macro as nothing so that INLINE_SYSCALL
-+ * won't set errno, which is important since we make system calls
-+ * before the errno symbol is dynamicly linked.
-+ */
-+#define __set_errno(X) {(void)(X);}
-+#include "sys/syscall.h"
-diff -urN uClibc/ldso-0.9.24/ldso/cris/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/cris/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/cris/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/cris/ld_sysdep.h 2003-08-27 07:59:23.000000000 -0500
-@@ -0,0 +1,112 @@
-+/* CRIS can never use Elf32_Rel relocations. */
-+#define ELF_USES_RELOCA
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long *) ARGS)
-+
-+/*
-+ * Initialization sequence for a GOT.
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+{ \
-+ GOT_BASE[1] = (unsigned long) MODULE; \
-+ GOT_BASE[2] = (unsigned long) _dl_linux_resolve; \
-+}
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader. RELP is the relocation that we
-+ * are performing, REL is the pointer to the address we are relocating.
-+ * SYMBOL is the symbol involved in the relocation, and LOAD is the
-+ * load address.
-+ */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP, REL, SYMBOL, LOAD) \
-+ switch (ELF32_R_TYPE((RELP)->r_info)) { \
-+ case R_CRIS_GLOB_DAT: \
-+ case R_CRIS_JUMP_SLOT: \
-+ case R_CRIS_32: \
-+ *REL = SYMBOL; \
-+ break; \
-+ case R_CRIS_16_PCREL: \
-+ *(short *) *REL = SYMBOL + (RELP)->r_addend - *REL - 2; \
-+ break; \
-+ case R_CRIS_32_PCREL: \
-+ *REL = SYMBOL + (RELP)->r_addend - *REL - 4; \
-+ break; \
-+ case R_CRIS_NONE: \
-+ break; \
-+ case R_CRIS_RELATIVE: \
-+ *REL = (unsigned long) LOAD + (RELP)->r_addend; \
-+ break; \
-+ default: \
-+ _dl_exit(1); \
-+ break; \
-+ }
-+
-+/*
-+ * Transfer control to the user's application once the dynamic loader
-+ * is done. This routine has to exit the current function, then call
-+ * _dl_elf_main.
-+ */
-+#define START() __asm__ volatile ("moveq 0,$r8\n\t" \
-+ "move $r8,$srp\n\t" \
-+ "move.d %1,$sp\n\t" \
-+ "jump %0\n\t" \
-+ : : "r" (_dl_elf_main), "r" (args))
-+
-+/* Defined some magic numbers that this ld.so should accept. */
-+#define MAGIC1 EM_CRIS
-+#undef MAGIC2
-+#define ELF_TARGET "CRIS"
-+
-+struct elf_resolve;
-+extern unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry);
-+
-+/* Cheap modulo implementation, taken from arm/ld_sysdep.h. */
-+static inline unsigned long
-+cris_mod(unsigned long m, unsigned long p)
-+{
-+ unsigned long i, t, inc;
-+
-+ i = p;
-+ t = 0;
-+
-+ while (!(i & (1 << 31))) {
-+ i <<= 1;
-+ t++;
-+ }
-+
-+ t--;
-+
-+ for (inc = t; inc > 2; inc--) {
-+ i = p << inc;
-+
-+ if (i & (1 << 31))
-+ break;
-+
-+ while (m >= i) {
-+ m -= i;
-+ i <<= 1;
-+ if (i & (1 << 31))
-+ break;
-+ if (i < p)
-+ break;
-+ }
-+ }
-+
-+ while (m >= p)
-+ m -= p;
-+
-+ return m;
-+}
-+
-+#define do_rem(result, n, base) result = cris_mod(n, base);
-+
-+/* 8192 bytes alignment */
-+#define PAGE_ALIGN 0xffffe000
-+#define ADDR_ALIGN 0x1fff
-+#define OFFS_ALIGN 0xffffe000
-diff -urN uClibc/ldso-0.9.24/ldso/cris/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/cris/resolve.S
---- uClibc/ldso-0.9.24/ldso/cris/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/cris/resolve.S 2002-09-16 03:11:43.000000000 -0500
-@@ -0,0 +1,48 @@
-+/*
-+ * This function is _not_ called directly. It is jumped to from PLT when
-+ * attempting to use a symbol that has not yet been resolved. The first
-+ * time a jump symbol (such as a function call inside a shared library)
-+ * is used (before it gets resolved) it will jump here. When we get called
-+ * the stack contains reloc_offset and tpnt is in MOF.
-+ *
-+ * We save all the registers, setup R10 and R11 with the right arguments
-+ * then call _dl_linux_resolver(tpnt, reloc_offset). _dl_linux_resolver()
-+ * figures out where the jump symbol is _really_ supposed to have jumped to
-+ * and returns that to us. Once we have that, we overwrite tpnt with this
-+ * fixed up address. We then clean up after ourselves, put all the registers
-+ * back how we found them, then we jump to where the fixed up address, which
-+ * is where the jump symbol that got us here really wanted to jump to in the
-+ * first place.
-+ */
-+
-+.globl _dl_linux_resolve
-+.type _dl_linux_resolve,@function
-+
-+_dl_linux_resolve:
-+ push $r13
-+ push $r12
-+ push $r11
-+ push $r10
-+ push $r9
-+ push $srp
-+ move.d [$sp+6*4],$r11
-+ move $mof,$r10
-+#ifdef __PIC__
-+ move.d $pc,$r0
-+ sub.d .:GOTOFF,$r0
-+ move.d _dl_linux_resolver:PLTG,$r9
-+ add.d $r0,$r9
-+ jsr $r9
-+#else
-+ jsr _dl_linux_resolver
-+#endif
-+ move.d $r10,[$sp+6*4]
-+ pop $srp
-+ pop $r9
-+ pop $r10
-+ pop $r11
-+ pop $r12
-+ pop $r13
-+ jump [$sp+]
-+
-+ .size _dl_linux_resolve, . - _dl_linux_resolve
-diff -urN uClibc/ldso-0.9.24/ldso/hash.c uClibc.ldso.24/ldso-0.9.24/ldso/hash.c
---- uClibc/ldso-0.9.24/ldso/hash.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/hash.c 2003-08-19 08:11:06.000000000 -0500
-@@ -0,0 +1,327 @@
-+/* vi: set sw=4 ts=4: */
-+/* Program to load an ELF binary on a linux system, and run it
-+ * after resolving ELF shared library symbols
-+ *
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
-+ * David Engel, Hongjiu Lu and Mitch D'Souza
-+ * Copyright (C) 2001-2002, Erik Andersen
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+
-+/* Various symbol table handling functions, including symbol lookup */
-+
-+/*
-+ * This is the start of the linked list that describes all of the files present
-+ * in the system with pointers to all of the symbol, string, and hash tables,
-+ * as well as all of the other good stuff in the binary.
-+ */
-+
-+struct elf_resolve *_dl_loaded_modules = NULL;
-+
-+/*
-+ * This is the list of modules that are loaded when the image is first
-+ * started. As we add more via dlopen, they get added into other
-+ * chains.
-+ */
-+struct dyn_elf *_dl_symbol_tables = NULL;
-+
-+/*
-+ * This is the list of modules that are loaded via dlopen. We may need
-+ * to search these for RTLD_GLOBAL files.
-+ */
-+struct dyn_elf *_dl_handles = NULL;
-+
-+
-+/*
-+ * This is the hash function that is used by the ELF linker to generate
-+ * the hash table that each executable and library is required to
-+ * have. We need it to decode the hash table.
-+ */
-+
-+unsigned long _dl_elf_hash(const char *name)
-+{
-+ unsigned long hash = 0;
-+ unsigned long tmp;
-+
-+ while (*name) {
-+ hash = (hash << 4) + *name++;
-+ if ((tmp = hash & 0xf0000000))
-+ hash ^= tmp >> 24;
-+ hash &= ~tmp;
-+ };
-+ return hash;
-+}
-+
-+/*
-+ * Check to see if a library has already been added to the hash chain.
-+ */
-+struct elf_resolve *_dl_check_hashed_files(const char *libname)
-+{
-+ struct elf_resolve *tpnt;
-+ int len = _dl_strlen(libname);
-+
-+ for (tpnt = _dl_loaded_modules; tpnt; tpnt = tpnt->next) {
-+ if (_dl_strncmp(tpnt->libname, libname, len) == 0 &&
-+ (tpnt->libname[len] == '\0' || tpnt->libname[len] == '.'))
-+ return tpnt;
-+ }
-+
-+ return NULL;
-+}
-+
-+/*
-+ * We call this function when we have just read an ELF library or executable.
-+ * We add the relevant info to the symbol chain, so that we can resolve all
-+ * externals properly.
-+ */
-+
-+struct elf_resolve *_dl_add_elf_hash_table(const char *libname,
-+ char *loadaddr, unsigned long *dynamic_info, unsigned long dynamic_addr,
-+ unsigned long dynamic_size)
-+{
-+ unsigned long *hash_addr;
-+ struct elf_resolve *tpnt;
-+ int i;
-+
-+ if (!_dl_loaded_modules) {
-+ tpnt = _dl_loaded_modules =
-+ (struct elf_resolve *) _dl_malloc(sizeof(struct elf_resolve));
-+ _dl_memset(tpnt, 0, sizeof(struct elf_resolve));
-+ } else {
-+ tpnt = _dl_loaded_modules;
-+ while (tpnt->next)
-+ tpnt = tpnt->next;
-+ tpnt->next = (struct elf_resolve *) _dl_malloc(sizeof(struct elf_resolve));
-+ _dl_memset(tpnt->next, 0, sizeof(struct elf_resolve));
-+ tpnt->next->prev = tpnt;
-+ tpnt = tpnt->next;
-+ };
-+
-+ tpnt->next = NULL;
-+ tpnt->init_flag = 0;
-+ tpnt->libname = _dl_strdup(libname);
-+ tpnt->dynamic_addr = (ElfW(Dyn) *)dynamic_addr;
-+ tpnt->dynamic_size = dynamic_size;
-+ tpnt->libtype = loaded_file;
-+
-+ if (dynamic_info[DT_HASH] != 0) {
-+ hash_addr = (unsigned long *) (intptr_t)(dynamic_info[DT_HASH] + loadaddr);
-+ tpnt->nbucket = *hash_addr++;
-+ tpnt->nchain = *hash_addr++;
-+ tpnt->elf_buckets = hash_addr;
-+ hash_addr += tpnt->nbucket;
-+ tpnt->chains = hash_addr;
-+ }
-+ tpnt->loadaddr = (ElfW(Addr))loadaddr;
-+ for (i = 0; i < 24; i++)
-+ tpnt->dynamic_info[i] = dynamic_info[i];
-+#ifdef __mips__
-+ {
-+ Elf32_Dyn *dpnt = (Elf32_Dyn *) dynamic_addr;
-+
-+ while(dpnt->d_tag) {
-+ if (dpnt->d_tag == DT_MIPS_GOTSYM)
-+ tpnt->mips_gotsym = dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_MIPS_LOCAL_GOTNO)
-+ tpnt->mips_local_gotno = dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_MIPS_SYMTABNO)
-+ tpnt->mips_symtabno = dpnt->d_un.d_val;
-+ dpnt++;
-+ }
-+ }
-+#endif
-+ return tpnt;
-+}
-+
-+
-+/*
-+ * This function resolves externals, and this is either called when we process
-+ * relocations or when we call an entry in the PLT table for the first time.
-+ */
-+
-+char *_dl_find_hash(const char *name, struct dyn_elf *rpnt1,
-+ struct elf_resolve *f_tpnt, enum caller_type caller_type)
-+{
-+ struct elf_resolve *tpnt;
-+ int si;
-+ char *pnt;
-+ int pass;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ unsigned long elf_hash_number, hn;
-+ char *weak_result;
-+ struct elf_resolve *first_def;
-+ struct dyn_elf *rpnt, first;
-+ char *data_result = 0; /* nakao */
-+
-+ weak_result = 0;
-+ elf_hash_number = _dl_elf_hash(name);
-+
-+ /* A quick little hack to make sure that any symbol in the executable
-+ will be preferred to one in a shared library. This is necessary so
-+ that any shared library data symbols referenced in the executable
-+ will be seen at the same address by the executable, shared libraries
-+ and dynamically loaded code. -Rob Ryan (robr@cmu.edu) */
-+ if (_dl_symbol_tables && !caller_type && rpnt1) {
-+ first = (*_dl_symbol_tables);
-+ first.next = rpnt1;
-+ rpnt1 = (&first);
-+ }
-+
-+ /*
-+ * The passes are so that we can first search the regular symbols
-+ * for whatever module was specified, and then search anything
-+ * loaded with RTLD_GLOBAL. When pass is 1, it means we are just
-+ * starting the first dlopened module, and anything above that
-+ * is just the next one in the chain.
-+ */
-+ for (pass = 0; (1 == 1); pass++) {
-+
-+ /*
-+ * If we are just starting to search for RTLD_GLOBAL, setup
-+ * the pointer for the start of the search.
-+ */
-+ if (pass == 1) {
-+ rpnt1 = _dl_handles;
-+ }
-+
-+ /*
-+ * Anything after this, we need to skip to the next module.
-+ */
-+ else if (pass >= 2) {
-+ rpnt1 = rpnt1->next_handle;
-+ }
-+
-+ /*
-+ * Make sure we still have a module, and make sure that this
-+ * module was loaded with RTLD_GLOBAL.
-+ */
-+ if (pass != 0) {
-+ if (rpnt1 == NULL)
-+ break;
-+ if ((rpnt1->flags & RTLD_GLOBAL) == 0)
-+ continue;
-+ }
-+
-+ for (rpnt = (rpnt1 ? rpnt1 : _dl_symbol_tables); rpnt; rpnt = rpnt->next) {
-+ tpnt = rpnt->dyn;
-+
-+ /*
-+ * The idea here is that if we are using dlsym, we want to
-+ * first search the entire chain loaded from dlopen, and
-+ * return a result from that if we found anything. If this
-+ * fails, then we continue the search into the stuff loaded
-+ * when the image was activated. For normal lookups, we start
-+ * with rpnt == NULL, so we should never hit this.
-+ */
-+ if (tpnt->libtype == elf_executable && weak_result != 0) {
-+ break;
-+ }
-+
-+ /*
-+ * Avoid calling .urem here.
-+ */
-+ do_rem(hn, elf_hash_number, tpnt->nbucket);
-+ symtab = (Elf32_Sym *) (intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ /*
-+ * This crap is required because the first instance of a
-+ * symbol on the chain will be used for all symbol references.
-+ * Thus this instance must be resolved to an address that
-+ * contains the actual function,
-+ */
-+
-+ first_def = NULL;
-+
-+ for (si = tpnt->elf_buckets[hn]; si; si = tpnt->chains[si]) {
-+ pnt = strtab + symtab[si].st_name;
-+
-+ if (_dl_strcmp(pnt, name) == 0 &&
-+ symtab[si].st_value != 0)
-+ {
-+ if ((ELF32_ST_TYPE(symtab[si].st_info) == STT_FUNC ||
-+ ELF32_ST_TYPE(symtab[si].st_info) == STT_NOTYPE ||
-+ ELF32_ST_TYPE(symtab[si].st_info) == STT_OBJECT) &&
-+ symtab[si].st_shndx != SHN_UNDEF) {
-+
-+ /* Here we make sure that we find a module where the symbol is
-+ * actually defined.
-+ */
-+
-+ if (f_tpnt) {
-+ if (!first_def)
-+ first_def = tpnt;
-+ if (first_def == f_tpnt
-+ && symtab[si].st_shndx == 0)
-+ continue;
-+ }
-+
-+ switch (ELF32_ST_BIND(symtab[si].st_info)) {
-+ case STB_GLOBAL:
-+ if (tpnt->libtype != elf_executable &&
-+ ELF32_ST_TYPE(symtab[si].st_info)
-+ == STT_NOTYPE)
-+ { /* nakao */
-+ data_result = (char *)tpnt->loadaddr +
-+ symtab[si].st_value; /* nakao */
-+ break; /* nakao */
-+ } else /* nakao */
-+ return (char*)tpnt->loadaddr + symtab[si].st_value;
-+ case STB_WEAK:
-+ if (!weak_result)
-+ weak_result = (char *)tpnt->loadaddr + symtab[si].st_value;
-+ break;
-+ default: /* Do local symbols need to be examined? */
-+ break;
-+ }
-+ }
-+#ifndef __mips__
-+ /*
-+ * References to the address of a function from an executable file and
-+ * the shared objects associated with it might not resolve to the same
-+ * value. To allow comparisons of function addresses we must resolve
-+ * to the address of the plt entry of the executable instead of the
-+ * real function address.
-+ * see "TIS ELF Specification Version 1.2, Book 3, A-11 (Function
-+ * Adresses)
-+ */
-+ if (resolver != caller_type &&
-+ NULL==f_tpnt && /*trick: don't handle R_??_JMP_SLOT reloc type*/
-+ tpnt->libtype == elf_executable &&
-+ ELF32_ST_TYPE(symtab[si].st_info) == STT_FUNC &&
-+ symtab[si].st_shndx == SHN_UNDEF)
-+ {
-+ return (char*)symtab[si].st_value;
-+ }
-+#endif
-+ }
-+ }
-+ }
-+ }
-+ if (data_result)
-+ return data_result; /* nakao */
-+ return weak_result;
-+}
-diff -urN uClibc/ldso-0.9.24/ldso/i386/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/i386/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/i386/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/i386/boot1_arch.h 2002-08-08 09:35:31.000000000 -0500
-@@ -0,0 +1,7 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture. See arm/boot1_arch.h for an example of what
-+ * can be done.
-+ */
-+
-+#define LD_BOOT(X) void _dl_boot (X)
-diff -urN uClibc/ldso-0.9.24/ldso/i386/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/i386/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/i386/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/i386/elfinterp.c 2003-11-06 16:09:38.000000000 -0600
-@@ -0,0 +1,415 @@
-+/* vi: set sw=4 ts=4: */
-+/* i386 ELF shared library loader suppport
-+ *
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
-+ * David Engel, Hongjiu Lu and Mitch D'Souza
-+ * Copyright (C) 2001-2002, Erik Andersen
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes_tab[] =
-+{
-+ [0] "R_386_NONE", "R_386_32", "R_386_PC32", "R_386_GOT32",
-+ [4] "R_386_PLT32", "R_386_COPY", "R_386_GLOB_DAT", "R_386_JMP_SLOT",
-+ [8] "R_386_RELATIVE", "R_386_GOTOFF", "R_386_GOTPC",
-+};
-+
-+static const char *
-+_dl_reltypes(int type)
-+{
-+ static char buf[22];
-+ const char *str;
-+
-+ if (type >= (int)(sizeof (_dl_reltypes_tab)/sizeof(_dl_reltypes_tab[0])) ||
-+ NULL == (str = _dl_reltypes_tab[type]))
-+ {
-+ str =_dl_simple_ltoa( buf, (unsigned long)(type));
-+ }
-+ return str;
-+}
-+
-+static
-+void debug_sym(Elf32_Sym *symtab,char *strtab,int symtab_index)
-+{
-+ if(_dl_debug_symbols)
-+ {
-+ if(symtab_index){
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\tvalue=%x\tsize=%x\tinfo=%x\tother=%x\tshndx=%x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_value,
-+ symtab[symtab_index].st_size,
-+ symtab[symtab_index].st_info,
-+ symtab[symtab_index].st_other,
-+ symtab[symtab_index].st_shndx);
-+ }
-+ }
-+}
-+
-+static void debug_reloc(Elf32_Sym *symtab,char *strtab, ELF_RELOC *rpnt)
-+{
-+ if(_dl_debug_reloc)
-+ {
-+ int symtab_index;
-+ const char *sym;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ sym = symtab_index ? strtab + symtab[symtab_index].st_name : "sym=0x0";
-+
-+ if(_dl_debug_symbols)
-+ _dl_dprintf(_dl_debug_file, "\n\t");
-+ else
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\t", sym);
-+#ifdef ELF_USES_RELOCA
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\taddend=%x",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ rpnt->r_addend);
-+#else
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\n",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset);
-+#endif
-+ }
-+}
-+#endif
-+
-+/* Program to load an ELF binary on a linux system, and run it.
-+ References to symbols in sharable libraries can be resolved by either
-+ an ELF sharable library or a linux style of shared library. */
-+
-+/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
-+ I ever taken any courses on internals. This program was developed using
-+ information available through the book "UNIX SYSTEM V RELEASE 4,
-+ Programmers guide: Ansi C and Programming Support Tools", which did
-+ a more than adequate job of explaining everything required to get this
-+ working. */
-+
-+extern int _dl_linux_resolve(void);
-+
-+unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
-+{
-+ int reloc_type;
-+ ELF_RELOC *this_reloc;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ int symtab_index;
-+ char *rel_addr;
-+ char *new_addr;
-+ char **got_addr;
-+ unsigned long instr_addr;
-+ char *symname;
-+
-+ rel_addr = (char *) (tpnt->dynamic_info[DT_JMPREL] + tpnt->loadaddr);
-+
-+ this_reloc = (ELF_RELOC *)(intptr_t)(rel_addr + reloc_entry);
-+ reloc_type = ELF32_R_TYPE(this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM(this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *)(intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ symname= strtab + symtab[symtab_index].st_name;
-+
-+ if (reloc_type != R_386_JMP_SLOT) {
-+ _dl_dprintf(2, "%s: Incorrect relocation type in jump relocations\n",
-+ _dl_progname);
-+ _dl_exit(1);
-+ }
-+
-+ /* Address of jump instruction to fix up */
-+ instr_addr = ((unsigned long) this_reloc->r_offset +
-+ (unsigned long) tpnt->loadaddr);
-+ got_addr = (char **) instr_addr;
-+
-+ /* Get the address of the GOT entry */
-+ new_addr = _dl_find_hash(symname, tpnt->symbol_scope, tpnt, resolver);
-+ if (!new_addr) {
-+ new_addr = _dl_find_hash(symname, NULL, NULL, resolver);
-+ if (new_addr) {
-+ return (unsigned long) new_addr;
-+ }
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n", _dl_progname, symname);
-+ _dl_exit(1);
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if ((unsigned long) got_addr < 0x40000000)
-+ {
-+ if (_dl_debug_bindings)
-+ {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname);
-+ if(_dl_debug_detail) _dl_dprintf(_dl_debug_file,
-+ "\n\tpatched %x ==> %x @ %x\n", *got_addr, new_addr, got_addr);
-+ }
-+ }
-+ if (!_dl_debug_nofixups) {
-+ *got_addr = new_addr;
-+ }
-+#else
-+ *got_addr = new_addr;
-+#endif
-+
-+ return (unsigned long) new_addr;
-+}
-+
-+static int
-+_dl_parse(struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ unsigned long rel_addr, unsigned long rel_size,
-+ int (*reloc_fnc) (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab))
-+{
-+ unsigned int i;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rpnt;
-+ int symtab_index;
-+
-+ /* Now parse the relocation information */
-+ rpnt = (ELF_RELOC *)(intptr_t) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof(ELF_RELOC);
-+
-+ symtab = (Elf32_Sym *)(intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++) {
-+ int res;
-+
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+
-+ /* When the dynamic linker bootstrapped itself, it resolved some symbols.
-+ Make sure we do not do them again */
-+ if (!symtab_index && tpnt->libtype == program_interpreter)
-+ continue;
-+ if (symtab_index && tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab,strtab,symtab_index);
-+ debug_reloc(symtab,strtab,rpnt);
-+#endif
-+
-+ res = reloc_fnc (tpnt, scope, rpnt, symtab, strtab);
-+
-+ if (res==0) continue;
-+
-+ _dl_dprintf(2, "\n%s: ",_dl_progname);
-+
-+ if (symtab_index)
-+ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
-+
-+ if (res <0)
-+ {
-+ int reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "can't handle reloc type %s\n ", _dl_reltypes(reloc_type));
-+#else
-+ _dl_dprintf(2, "can't handle reloc type %x\n", reloc_type);
-+#endif
-+ _dl_exit(-res);
-+ }
-+ else if (res >0)
-+ {
-+ _dl_dprintf(2, "can't resolve symbol\n");
-+ return res;
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+static int
-+_dl_do_reloc (struct elf_resolve *tpnt,struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ char *symname;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope,
-+ (reloc_type == R_386_JMP_SLOT ? tpnt : NULL), symbolrel);
-+
-+ /*
-+ * We want to allow undefined references to weak symbols - this might
-+ * have been intentional. We should not be linking local symbols
-+ * here, so all bases should be covered.
-+ */
-+
-+ if (!symbol_addr && ELF32_ST_BIND(symtab[symtab_index].st_info) == STB_GLOBAL) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "\tglobal symbol '%s' already defined in '%s'\n",
-+ symname, tpnt->libname);
-+#endif
-+ return 0;
-+ }
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_386_NONE:
-+ break;
-+ case R_386_32:
-+ *reloc_addr += symbol_addr;
-+ break;
-+ case R_386_PC32:
-+ *reloc_addr += symbol_addr - (unsigned long) reloc_addr;
-+ break;
-+ case R_386_GLOB_DAT:
-+ case R_386_JMP_SLOT:
-+ *reloc_addr = symbol_addr;
-+ break;
-+ case R_386_RELATIVE:
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ break;
-+ case R_386_COPY:
-+ /* handled later on */
-+ break;
-+ default:
-+ return -1; /*call _dl_exit(1) */
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+
-+ return 0;
-+}
-+
-+static int
-+_dl_do_lazy_reloc (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ unsigned long *reloc_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+ (void)scope;
-+ (void)symtab;
-+ (void)strtab;
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_386_NONE:
-+ break;
-+ case R_386_JMP_SLOT:
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ break;
-+ default:
-+ return -1; /*call _dl_exit(1) */
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+ return 0;
-+
-+}
-+
-+/* This is done as a separate step, because there are cases where
-+ information is first copied and later initialized. This results in
-+ the wrong information being copied. Someone at Sun was complaining about
-+ a bug in the handling of _COPY by SVr4, and this may in fact be what he
-+ was talking about. Sigh. */
-+
-+/* No, there are cases where the SVr4 linker fails to emit COPY relocs
-+ at all */
-+static int
-+_dl_do_copy (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+ int goof = 0;
-+ char *symname;
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ if (reloc_type != R_386_COPY)
-+ return 0;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope, NULL, copyrel);
-+ if (!symbol_addr) goof++;
-+ }
-+ if (!goof) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_move)
-+ _dl_dprintf(_dl_debug_file,"\n%s move %x bytes from %x to %x",
-+ symname, symtab[symtab_index].st_size,
-+ symbol_addr, symtab[symtab_index].st_value);
-+#endif
-+ _dl_memcpy((char *) symtab[symtab_index].st_value,
-+ (char *) symbol_addr, symtab[symtab_index].st_size);
-+ }
-+
-+ return goof;
-+}
-+
-+void _dl_parse_lazy_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ (void)_dl_parse(tpnt, NULL, rel_addr, rel_size, _dl_do_lazy_reloc);
-+}
-+
-+int _dl_parse_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ return _dl_parse(tpnt, tpnt->symbol_scope, rel_addr, rel_size, _dl_do_reloc);
-+}
-+
-+int _dl_parse_copy_information(struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ return _dl_parse(xpnt->dyn, xpnt->next, rel_addr, rel_size, _dl_do_copy);
-+}
-+
-diff -urN uClibc/ldso-0.9.24/ldso/i386/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/i386/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/i386/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/i386/ld_syscalls.h 2002-08-09 07:20:21.000000000 -0500
-@@ -0,0 +1,7 @@
-+/* Define the __set_errno macro as nothing so that INLINE_SYSCALL
-+ * won't set errno, which is important since we make system calls
-+ * before the errno symbol is dynamicly linked. */
-+
-+#define __set_errno(X) {(void)(X);}
-+#include "sys/syscall.h"
-+
-diff -urN uClibc/ldso-0.9.24/ldso/i386/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/i386/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/i386/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/i386/ld_sysdep.h 2002-05-28 16:33:32.000000000 -0500
-@@ -0,0 +1,81 @@
-+/*
-+ * Various assmbly language/system dependent hacks that are required
-+ * so that we can minimize the amount of platform specific code.
-+ */
-+
-+/*
-+ * Define this if the system uses RELOCA.
-+ */
-+#undef ELF_USES_RELOCA
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long*) & ARGS)
-+
-+/*
-+ * Initialization sequence for a GOT.
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+{ \
-+ GOT_BASE[2] = (unsigned long) _dl_linux_resolve; \
-+ GOT_BASE[1] = (unsigned long) MODULE; \
-+}
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader. RELP is the relocation that we
-+ * are performing, REL is the pointer to the address we are relocating.
-+ * SYMBOL is the symbol involved in the relocation, and LOAD is the
-+ * load address.
-+ */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ switch(ELF32_R_TYPE((RELP)->r_info)){ \
-+ case R_386_32: \
-+ *REL += SYMBOL; \
-+ break; \
-+ case R_386_PC32: \
-+ *REL += SYMBOL - (unsigned long) REL; \
-+ break; \
-+ case R_386_GLOB_DAT: \
-+ case R_386_JMP_SLOT: \
-+ *REL = SYMBOL; \
-+ break; \
-+ case R_386_RELATIVE: \
-+ *REL += (unsigned long) LOAD; \
-+ break; \
-+ default: \
-+ _dl_exit(1); \
-+ }
-+
-+
-+/*
-+ * Transfer control to the user's application, once the dynamic loader
-+ * is done. This routine has to exit the current function, then
-+ * call the _dl_elf_main function.
-+ */
-+#define START() \
-+ __asm__ volatile ("leave\n\t" \
-+ "jmp *%%eax\n\t" \
-+ : "=a" (status) : "a" (_dl_elf_main))
-+
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+
-+#define MAGIC1 EM_386
-+#undef MAGIC2
-+/* Used for error messages */
-+#define ELF_TARGET "386"
-+
-+struct elf_resolve;
-+extern unsigned long _dl_linux_resolver(struct elf_resolve * tpnt, int reloc_entry);
-+
-+#define do_rem(result, n, base) result = (n % base)
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/i386/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/i386/resolve.S
---- uClibc/ldso-0.9.24/ldso/i386/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/i386/resolve.S 2001-06-14 16:51:51.000000000 -0500
-@@ -0,0 +1,52 @@
-+/*
-+ * This function is _not_ called directly. It is jumped to (so no return
-+ * address is on the stack) when attempting to use a symbol that has not yet
-+ * been resolved. The first time a jump symbol (such as a function call inside
-+ * a shared library) is used (before it gets resolved) it will jump here to
-+ * _dl_linux_resolve. When we get called the stack looks like this:
-+ * reloc_entry
-+ * tpnt
-+ *
-+ * This function saves all the registers, puts a copy of reloc_entry and tpnt
-+ * on the stack (as function arguments) then make the function call
-+ * _dl_linux_resolver(tpnt, reloc_entry). _dl_linux_resolver() figures out
-+ * where the jump symbol is _really_ supposed to have jumped to and returns
-+ * that to us. Once we have that, we overwrite tpnt with this fixed up
-+ * address. We then clean up after ourselves, put all the registers back how we
-+ * found them, then we jump to where the fixed up address, which is where the
-+ * jump symbol that got us here really wanted to jump to in the first place.
-+ * found them, then we jump to the fixed up address, which is where the jump
-+ * symbol that got us here really wanted to jump to in the first place.
-+ * -Erik Andersen
-+ */
-+
-+.text
-+.align 4
-+
-+.globl _dl_linux_resolve
-+.type _dl_linux_resolve,@function
-+
-+_dl_linux_resolve:
-+ pusha /* preserve all regs */
-+ lea 0x20(%esp),%eax /* eax = tpnt and reloc_entry params */
-+ pushl 4(%eax) /* push copy of reloc_entry param */
-+ pushl (%eax) /* push copy of tpnt param */
-+
-+#ifdef __PIC__
-+ call .L24
-+.L24:
-+ popl %ebx
-+ addl $_GLOBAL_OFFSET_TABLE_+[.-.L24],%ebx
-+ movl _dl_linux_resolver@GOT(%ebx),%ebx /* eax = resolved func */
-+ call *%ebx
-+#else
-+ call _dl_linux_resolver
-+#endif
-+ movl %eax,0x28(%esp) /* store func addr over original
-+ * tpnt param */
-+ addl $0x8,%esp /* remove copy parameters */
-+ popa /* restore regs */
-+ ret $4 /* jump to func removing original
-+ * reloc_entry param from stack */
-+.LFE2:
-+ .size _dl_linux_resolve,.LFE2-_dl_linux_resolve
-diff -urN uClibc/ldso-0.9.24/ldso/ldso.c uClibc.ldso.24/ldso-0.9.24/ldso/ldso.c
---- uClibc/ldso-0.9.24/ldso/ldso.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/ldso.c 2003-12-05 14:24:26.000000000 -0600
-@@ -0,0 +1,1296 @@
-+/* vi: set sw=4 ts=4: */
-+/* Program to load an ELF binary on a linux system, and run it
-+ * after resolving ELF shared library symbols
-+ *
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
-+ * David Engel, Hongjiu Lu and Mitch D'Souza
-+ * Copyright (C) 2001-2002, Erik Andersen
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+// Support a list of library preloads in /etc/ld.so.preload
-+//#define SUPPORT_LDSO_PRELOAD_FILE
-+
-+
-+/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
-+ I ever taken any courses on internals. This program was developed using
-+ information available through the book "UNIX SYSTEM V RELEASE 4,
-+ Programmers guide: Ansi C and Programming Support Tools", which did
-+ a more than adequate job of explaining everything required to get this
-+ working. */
-+
-+/*
-+ * The main trick with this program is that initially, we ourselves are
-+ * not dynamicly linked. This means that we cannot access any global
-+ * variables or call any functions. No globals initially, since the
-+ * Global Offset Table (GOT) is initialized by the linker assuming a
-+ * virtual address of 0, and no function calls initially since the
-+ * Procedure Linkage Table (PLT) is not yet initialized.
-+ *
-+ * There are additional initial restrictions - we cannot use large
-+ * switch statements, since the compiler generates tables of addresses
-+ * and jumps through them. We can use inline functions, because these
-+ * do not transfer control to a new address, but they must be static so
-+ * that they are not exported from the modules. We cannot use normal
-+ * syscall stubs, because these all reference the errno global variable
-+ * which is not yet initialized. We can use all of the local stack
-+ * variables that we want.
-+ *
-+ * Life is further complicated by the fact that initially we do not
-+ * want to do a complete dynamic linking. We want to allow the user to
-+ * supply new functions to override symbols (i.e. weak symbols and/or
-+ * LD_PRELOAD). So initially, we only perform relocations for
-+ * variables that start with "_dl_" since ANSI specifies that the user
-+ * is not supposed to redefine any of these variables.
-+ *
-+ * Fortunately, the linker itself leaves a few clues lying around, and
-+ * when the kernel starts the image, there are a few further clues.
-+ * First of all, there is Auxiliary Vector Table information sitting on
-+ * which is provided to us by the kernel, and which includes
-+ * information about the load address that the program interpreter was
-+ * loaded at, the number of sections, the address the application was
-+ * loaded at and so forth. Here this information is stored in the
-+ * array auxvt. For details see linux/fs/binfmt_elf.c where it calls
-+ * NEW_AUX_ENT() a bunch of time....
-+ *
-+ * Next, we need to find the GOT. On most arches there is a register
-+ * pointing to the GOT, but just in case (and for new ports) I've added
-+ * some (slow) C code to locate the GOT for you.
-+ *
-+ * This code was originally written for SVr4, and there the kernel
-+ * would load all text pages R/O, so they needed to call mprotect a
-+ * zillion times to mark all text pages as writable so dynamic linking
-+ * would succeed. Then when they were done, they would change the
-+ * protections for all the pages back again. Well, under Linux
-+ * everything is loaded writable (since Linux does copy on write
-+ * anyways) so all the mprotect stuff has been disabled.
-+ *
-+ * Initially, we do not have access to _dl_malloc since we can't yet
-+ * make function calls, so we mmap one page to use as scratch space.
-+ * Later on, when we can call _dl_malloc we reuse this this memory.
-+ * This is also beneficial, since we do not want to use the same memory
-+ * pool as malloc anyway - esp if the user redefines malloc to do
-+ * something funky.
-+ *
-+ * Our first task is to perform a minimal linking so that we can call
-+ * other portions of the dynamic linker. Once we have done this, we
-+ * then build the list of modules that the application requires, using
-+ * LD_LIBRARY_PATH if this is not a suid program (/usr/lib otherwise).
-+ * Once this is done, we can do the dynamic linking as required, and we
-+ * must omit the things we did to get the dynamic linker up and running
-+ * in the first place. After we have done this, we just have a few
-+ * housekeeping chores and we can transfer control to the user's
-+ * application.
-+ */
-+
-+#include "ldso.h"
-+
-+
-+#define ALLOW_ZERO_PLTGOT
-+
-+/* Some arches may need to override this in boot1_arch.h */
-+#define ELFMAGIC ELFMAG
-+
-+/* This is a poor man's malloc, used prior to resolving our internal poor man's malloc */
-+#define LD_MALLOC(SIZE) ((void *) (malloc_buffer += SIZE, malloc_buffer - SIZE)) ; REALIGN();
-+/*
-+ * Make sure that the malloc buffer is aligned on 4 byte boundary. For 64 bit
-+ * platforms we may need to increase this to 8, but this is good enough for
-+ * now. This is typically called after LD_MALLOC.
-+ */
-+#define REALIGN() malloc_buffer = (char *) (((unsigned long) malloc_buffer + 3) & ~(3))
-+
-+char *_dl_library_path = 0; /* Where we look for libraries */
-+char *_dl_preload = 0; /* Things to be loaded before the libs. */
-+char *_dl_ldsopath = 0;
-+static int _dl_be_lazy = RTLD_LAZY;
-+#ifdef __SUPPORT_LD_DEBUG__
-+char *_dl_debug = 0;
-+char *_dl_debug_symbols = 0;
-+char *_dl_debug_move = 0;
-+char *_dl_debug_reloc = 0;
-+char *_dl_debug_detail = 0;
-+char *_dl_debug_nofixups = 0;
-+char *_dl_debug_bindings = 0;
-+int _dl_debug_file = 2;
-+#else
-+#define _dl_debug_file 2
-+#endif
-+static char *_dl_malloc_addr, *_dl_mmap_zero;
-+
-+static char *_dl_trace_loaded_objects = 0;
-+static int (*_dl_elf_main) (int, char **, char **);
-+struct r_debug *_dl_debug_addr = NULL;
-+unsigned long *_dl_brkp;
-+unsigned long *_dl_envp;
-+int _dl_fixup(struct elf_resolve *tpnt, int lazy);
-+void _dl_debug_state(void);
-+char *_dl_get_last_path_component(char *path);
-+static void _dl_get_ready_to_run(struct elf_resolve *tpnt, struct elf_resolve *app_tpnt,
-+ unsigned long load_addr, unsigned long *hash_addr, Elf32_auxv_t auxvt[AT_EGID + 1],
-+ char **envp, struct r_debug *debug_addr);
-+
-+#include "boot1_arch.h"
-+#include "_dl_progname.h" /* Pull in the value of _dl_progname */
-+
-+/* When we enter this piece of code, the program stack looks like this:
-+ argc argument counter (integer)
-+ argv[0] program name (pointer)
-+ argv[1...N] program args (pointers)
-+ argv[argc-1] end of args (integer)
-+ NULL
-+ env[0...N] environment variables (pointers)
-+ NULL
-+ auxvt[0...N] Auxiliary Vector Table elements (mixed types)
-+*/
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+/* Debugging is especially tricky on PowerPC, since string literals
-+ * require relocations. Thus, you can't use _dl_dprintf() for
-+ * anything until the bootstrap relocations are finished. */
-+static inline void hexprint(unsigned long x)
-+{
-+ int i;
-+ char c;
-+
-+ for (i = 0; i < 8; i++) {
-+ c = ((x >> 28) + '0');
-+ if (c > '9')
-+ c += 'a' - '9' - 1;
-+ _dl_write(1, &c, 1);
-+ x <<= 4;
-+ }
-+ c = '\n';
-+ _dl_write(1, &c, 1);
-+}
-+#endif
-+
-+LD_BOOT(unsigned long args) __attribute__ ((unused));
-+
-+LD_BOOT(unsigned long args)
-+{
-+ unsigned int argc;
-+ char **argv, **envp;
-+ unsigned long load_addr;
-+ unsigned long *got;
-+ unsigned long *aux_dat;
-+ int goof = 0;
-+ ElfW(Ehdr) *header;
-+ struct elf_resolve *tpnt;
-+ struct elf_resolve *app_tpnt;
-+ Elf32_auxv_t auxvt[AT_EGID + 1];
-+ unsigned char *malloc_buffer, *mmap_zero;
-+ Elf32_Dyn *dpnt;
-+ unsigned long *hash_addr;
-+ struct r_debug *debug_addr = NULL;
-+ int indx;
-+ int status;
-+
-+
-+ /* WARNING! -- we cannot make _any_ funtion calls until we have
-+ * taken care of fixing up our own relocations. Making static
-+ * inline calls is ok, but _no_ function calls. Not yet
-+ * anyways. */
-+
-+ /* First obtain the information on the stack that tells us more about
-+ what binary is loaded, where it is loaded, etc, etc */
-+ GET_ARGV(aux_dat, args);
-+#if defined (__arm__) || defined (__mips__) || defined (__cris__)
-+ aux_dat += 1;
-+#endif
-+ argc = *(aux_dat - 1);
-+ argv = (char **) aux_dat;
-+ aux_dat += argc; /* Skip over the argv pointers */
-+ aux_dat++; /* Skip over NULL at end of argv */
-+ envp = (char **) aux_dat;
-+ while (*aux_dat)
-+ aux_dat++; /* Skip over the envp pointers */
-+ aux_dat++; /* Skip over NULL at end of envp */
-+
-+ /* Place -1 here as a checkpoint. We later check if it was changed
-+ * when we read in the auxvt */
-+ auxvt[AT_UID].a_type = -1;
-+
-+ /* The junk on the stack immediately following the environment is
-+ * the Auxiliary Vector Table. Read out the elements of the auxvt,
-+ * sort and store them in auxvt for later use. */
-+ while (*aux_dat) {
-+ Elf32_auxv_t *auxv_entry = (Elf32_auxv_t *) aux_dat;
-+
-+ if (auxv_entry->a_type <= AT_EGID) {
-+ _dl_memcpy(&(auxvt[auxv_entry->a_type]), auxv_entry, sizeof(Elf32_auxv_t));
-+ }
-+ aux_dat += 2;
-+ }
-+
-+ /* locate the ELF header. We need this done as soon as possible
-+ * (esp since SEND_STDERR() needs this on some platforms... */
-+ load_addr = auxvt[AT_BASE].a_un.a_val;
-+ header = (ElfW(Ehdr) *) auxvt[AT_BASE].a_un.a_ptr;
-+
-+ /* Check the ELF header to make sure everything looks ok. */
-+ if (!header || header->e_ident[EI_CLASS] != ELFCLASS32 ||
-+ header->e_ident[EI_VERSION] != EV_CURRENT
-+#if !defined(__powerpc__) && !defined(__mips__) && !defined(__sh__)
-+ || _dl_strncmp((void *) header, ELFMAGIC, SELFMAG) != 0
-+#else
-+ || header->e_ident[EI_MAG0] != ELFMAG0
-+ || header->e_ident[EI_MAG1] != ELFMAG1
-+ || header->e_ident[EI_MAG2] != ELFMAG2
-+ || header->e_ident[EI_MAG3] != ELFMAG3
-+#endif
-+ ) {
-+ SEND_STDERR("Invalid ELF header\n");
-+ _dl_exit(0);
-+ }
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("ELF header=");
-+ SEND_ADDRESS_STDERR(load_addr, 1);
-+#endif
-+
-+
-+ /* Locate the global offset table. Since this code must be PIC
-+ * we can take advantage of the magic offset register, if we
-+ * happen to know what that is for this architecture. If not,
-+ * we can always read stuff out of the ELF file to find it... */
-+#if defined(__i386__)
-+ __asm__("\tmovl %%ebx,%0\n\t":"=a"(got));
-+#elif defined(__m68k__)
-+ __asm__("movel %%a5,%0":"=g"(got))
-+#elif defined(__sparc__)
-+ __asm__("\tmov %%l7,%0\n\t":"=r"(got))
-+#elif defined(__arm__)
-+ __asm__("\tmov %0, r10\n\t":"=r"(got));
-+#elif defined(__powerpc__)
-+ __asm__("\tbl _GLOBAL_OFFSET_TABLE_-4@local\n\t":"=l"(got));
-+#elif defined(__mips__)
-+ __asm__("\tmove %0, $28\n\tsubu %0,%0,0x7ff0\n\t":"=r"(got));
-+#elif defined(__sh__)
-+ __asm__(
-+" mov.l 1f, %0\n"
-+" mova 1f, r0\n"
-+" bra 2f\n"
-+" add r0, %0\n"
-+" .balign 4\n"
-+"1: .long _GLOBAL_OFFSET_TABLE_\n"
-+"2:" : "=r" (got) : : "r0");
-+#elif defined(__cris__)
-+ __asm__("\tmove.d $pc,%0\n\tsub.d .:GOTOFF,%0\n\t":"=r"(got));
-+#else
-+ /* Do things the slow way in C */
-+ {
-+ unsigned long tx_reloc;
-+ Elf32_Dyn *dynamic = NULL;
-+ Elf32_Shdr *shdr;
-+ Elf32_Phdr *pt_load;
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("Finding the GOT using C code to read the ELF file\n");
-+#endif
-+ /* Find where the dynamic linking information section is hiding */
-+ shdr = (Elf32_Shdr *) (header->e_shoff + (char *) header);
-+ for (indx = header->e_shnum; --indx >= 0; ++shdr) {
-+ if (shdr->sh_type == SHT_DYNAMIC) {
-+ goto found_dynamic;
-+ }
-+ }
-+ SEND_STDERR("missing dynamic linking information section \n");
-+ _dl_exit(0);
-+
-+ found_dynamic:
-+ dynamic = (Elf32_Dyn *) (shdr->sh_offset + (char *) header);
-+
-+ /* Find where PT_LOAD is hiding */
-+ pt_load = (Elf32_Phdr *) (header->e_phoff + (char *) header);
-+ for (indx = header->e_phnum; --indx >= 0; ++pt_load) {
-+ if (pt_load->p_type == PT_LOAD) {
-+ goto found_pt_load;
-+ }
-+ }
-+ SEND_STDERR("missing loadable program segment\n");
-+ _dl_exit(0);
-+
-+ found_pt_load:
-+ /* Now (finally) find where DT_PLTGOT is hiding */
-+ tx_reloc = pt_load->p_vaddr - pt_load->p_offset;
-+ for (; DT_NULL != dynamic->d_tag; ++dynamic) {
-+ if (dynamic->d_tag == DT_PLTGOT) {
-+ goto found_got;
-+ }
-+ }
-+ SEND_STDERR("missing global offset table\n");
-+ _dl_exit(0);
-+
-+ found_got:
-+ got = (unsigned long *) (dynamic->d_un.d_val - tx_reloc +
-+ (char *) header);
-+ }
-+#endif
-+
-+ /* Now, finally, fix up the location of the dynamic stuff */
-+ dpnt = (Elf32_Dyn *) (*got + load_addr);
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("First Dynamic section entry=");
-+ SEND_ADDRESS_STDERR(dpnt, 1);
-+#endif
-+
-+
-+ /* Call mmap to get a page of writable memory that can be used
-+ * for _dl_malloc throughout the shared lib loader. */
-+ mmap_zero = malloc_buffer = _dl_mmap((void *) 0, 4096,
-+ PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
-+ if (_dl_mmap_check_error(mmap_zero)) {
-+ SEND_STDERR("dl_boot: mmap of a spare page failed!\n");
-+ _dl_exit(13);
-+ }
-+
-+ tpnt = LD_MALLOC(sizeof(struct elf_resolve));
-+ _dl_memset(tpnt, 0, sizeof(struct elf_resolve));
-+ app_tpnt = LD_MALLOC(sizeof(struct elf_resolve));
-+ _dl_memset(app_tpnt, 0, sizeof(struct elf_resolve));
-+
-+ /*
-+ * This is used by gdb to locate the chain of shared libraries that are currently loaded.
-+ */
-+ debug_addr = LD_MALLOC(sizeof(struct r_debug));
-+ _dl_memset(debug_addr, 0, sizeof(struct r_debug));
-+
-+ /* OK, that was easy. Next scan the DYNAMIC section of the image.
-+ We are only doing ourself right now - we will have to do the rest later */
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("scanning DYNAMIC section\n");
-+#endif
-+ while (dpnt->d_tag) {
-+#if defined(__mips__)
-+ if (dpnt->d_tag == DT_MIPS_GOTSYM)
-+ tpnt->mips_gotsym = (unsigned long) dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_MIPS_LOCAL_GOTNO)
-+ tpnt->mips_local_gotno = (unsigned long) dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_MIPS_SYMTABNO)
-+ tpnt->mips_symtabno = (unsigned long) dpnt->d_un.d_val;
-+#endif
-+ if (dpnt->d_tag < 24) {
-+ tpnt->dynamic_info[dpnt->d_tag] = dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_TEXTREL) {
-+ tpnt->dynamic_info[DT_TEXTREL] = 1;
-+ }
-+ }
-+ dpnt++;
-+ }
-+
-+ {
-+ ElfW(Phdr) *ppnt;
-+ int i;
-+
-+ ppnt = (ElfW(Phdr) *) auxvt[AT_PHDR].a_un.a_ptr;
-+ for (i = 0; i < auxvt[AT_PHNUM].a_un.a_val; i++, ppnt++)
-+ if (ppnt->p_type == PT_DYNAMIC) {
-+ dpnt = (Elf32_Dyn *) ppnt->p_vaddr;
-+ while (dpnt->d_tag) {
-+#if defined(__mips__)
-+ if (dpnt->d_tag == DT_MIPS_GOTSYM)
-+ app_tpnt->mips_gotsym =
-+ (unsigned long) dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_MIPS_LOCAL_GOTNO)
-+ app_tpnt->mips_local_gotno =
-+ (unsigned long) dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_MIPS_SYMTABNO)
-+ app_tpnt->mips_symtabno =
-+ (unsigned long) dpnt->d_un.d_val;
-+ if (dpnt->d_tag > DT_JMPREL) {
-+ dpnt++;
-+ continue;
-+ }
-+ app_tpnt->dynamic_info[dpnt->d_tag] = dpnt->d_un.d_val;
-+
-+#warning "Debugging threads on mips won't work till someone fixes this..."
-+#if 0
-+ if (dpnt->d_tag == DT_DEBUG) {
-+ dpnt->d_un.d_val = (unsigned long) debug_addr;
-+ }
-+#endif
-+
-+#else
-+ if (dpnt->d_tag > DT_JMPREL) {
-+ dpnt++;
-+ continue;
-+ }
-+ app_tpnt->dynamic_info[dpnt->d_tag] = dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_DEBUG) {
-+ dpnt->d_un.d_val = (unsigned long) debug_addr;
-+ }
-+#endif
-+ if (dpnt->d_tag == DT_TEXTREL)
-+ app_tpnt->dynamic_info[DT_TEXTREL] = 1;
-+ dpnt++;
-+ }
-+ }
-+ }
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("done scanning DYNAMIC section\n");
-+#endif
-+
-+ /* Get some more of the information that we will need to dynamicly link
-+ this module to itself */
-+
-+ hash_addr = (unsigned long *) (tpnt->dynamic_info[DT_HASH] + load_addr);
-+ tpnt->nbucket = *hash_addr++;
-+ tpnt->nchain = *hash_addr++;
-+ tpnt->elf_buckets = hash_addr;
-+ hash_addr += tpnt->nbucket;
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("done grabbing link information\n");
-+#endif
-+
-+#ifndef FORCE_SHAREABLE_TEXT_SEGMENTS
-+ /* Ugly, ugly. We need to call mprotect to change the protection of
-+ the text pages so that we can do the dynamic linking. We can set the
-+ protection back again once we are done */
-+
-+ {
-+ ElfW(Phdr) *ppnt;
-+ int i;
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("calling mprotect on the shared library/dynamic linker\n");
-+#endif
-+
-+ /* First cover the shared library/dynamic linker. */
-+ if (tpnt->dynamic_info[DT_TEXTREL]) {
-+ header = (ElfW(Ehdr) *) auxvt[AT_BASE].a_un.a_ptr;
-+ ppnt = (ElfW(Phdr) *) ((int)auxvt[AT_BASE].a_un.a_ptr +
-+ header->e_phoff);
-+ for (i = 0; i < header->e_phnum; i++, ppnt++) {
-+ if (ppnt->p_type == PT_LOAD && !(ppnt->p_flags & PF_W)) {
-+ _dl_mprotect((void *) (load_addr + (ppnt->p_vaddr & PAGE_ALIGN)),
-+ (ppnt->p_vaddr & ADDR_ALIGN) + (unsigned long) ppnt->p_filesz,
-+ PROT_READ | PROT_WRITE | PROT_EXEC);
-+ }
-+ }
-+ }
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("calling mprotect on the application program\n");
-+#endif
-+ /* Now cover the application program. */
-+ if (app_tpnt->dynamic_info[DT_TEXTREL]) {
-+ ppnt = (ElfW(Phdr) *) auxvt[AT_PHDR].a_un.a_ptr;
-+ for (i = 0; i < auxvt[AT_PHNUM].a_un.a_val; i++, ppnt++) {
-+ if (ppnt->p_type == PT_LOAD && !(ppnt->p_flags & PF_W))
-+ _dl_mprotect((void *) (ppnt->p_vaddr & PAGE_ALIGN),
-+ (ppnt->p_vaddr & ADDR_ALIGN) +
-+ (unsigned long) ppnt->p_filesz,
-+ PROT_READ | PROT_WRITE | PROT_EXEC);
-+ }
-+ }
-+ }
-+#endif
-+
-+#if defined(__mips__)
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("About to do MIPS specific GOT bootstrap\n");
-+#endif
-+ /* For MIPS we have to do stuff to the GOT before we do relocations. */
-+ PERFORM_BOOTSTRAP_GOT(got);
-+#endif
-+
-+ /* OK, now do the relocations. We do not do a lazy binding here, so
-+ that once we are done, we have considerably more flexibility. */
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("About to do library loader relocations\n");
-+#endif
-+
-+ goof = 0;
-+ for (indx = 0; indx < 2; indx++) {
-+ unsigned int i;
-+ ELF_RELOC *rpnt;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+ int symtab_index;
-+ unsigned long rel_addr, rel_size;
-+
-+
-+#ifdef ELF_USES_RELOCA
-+ rel_addr = (indx ? tpnt->dynamic_info[DT_JMPREL] : tpnt->
-+ dynamic_info[DT_RELA]);
-+ rel_size = (indx ? tpnt->dynamic_info[DT_PLTRELSZ] : tpnt->
-+ dynamic_info[DT_RELASZ]);
-+#else
-+ rel_addr = (indx ? tpnt->dynamic_info[DT_JMPREL] : tpnt->
-+ dynamic_info[DT_REL]);
-+ rel_size = (indx ? tpnt->dynamic_info[DT_PLTRELSZ] : tpnt->
-+ dynamic_info[DT_RELSZ]);
-+#endif
-+
-+ if (!rel_addr)
-+ continue;
-+
-+ /* Now parse the relocation information */
-+ rpnt = (ELF_RELOC *) (rel_addr + load_addr);
-+ for (i = 0; i < rel_size; i += sizeof(ELF_RELOC), rpnt++) {
-+ reloc_addr = (unsigned long *) (load_addr + (unsigned long) rpnt->r_offset);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ if (symtab_index) {
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + load_addr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + load_addr);
-+
-+ /* We only do a partial dynamic linking right now. The user
-+ is not supposed to redefine any symbols that start with
-+ a '_', so we can do this with confidence. */
-+ if (!_dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+ symbol_addr = load_addr + symtab[symtab_index].st_value;
-+
-+ if (!symbol_addr) {
-+ /* This will segfault - you cannot call a function until
-+ * we have finished the relocations.
-+ */
-+ SEND_STDERR("ELF dynamic loader - unable to self-bootstrap - symbol ");
-+ SEND_STDERR(strtab + symtab[symtab_index].st_name);
-+ SEND_STDERR(" undefined.\n");
-+ goof++;
-+ }
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ SEND_STDERR("About to fixup symbol: ");
-+ SEND_STDERR(strtab + symtab[symtab_index].st_name);
-+ SEND_STDERR("\n");
-+#endif
-+ }
-+ /*
-+ * Use this machine-specific macro to perform the actual relocation.
-+ */
-+ PERFORM_BOOTSTRAP_RELOC(rpnt, reloc_addr, symbol_addr, load_addr);
-+ }
-+ }
-+
-+ if (goof) {
-+ _dl_exit(14);
-+ }
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ /* Wahoo!!! */
-+ _dl_dprintf(_dl_debug_file, "Done relocating library loader, so we can now\n\tuse globals and make function calls!\n");
-+#endif
-+
-+ if (argv[0]) {
-+ _dl_progname = argv[0];
-+ }
-+
-+ /* Start to build the tables of the modules that are required for
-+ * this beast to run. We start with the basic executable, and then
-+ * go from there. Eventually we will run across ourself, and we
-+ * will need to properly deal with that as well. */
-+
-+ /* Make it so _dl_malloc can use the page of memory we have already
-+ * allocated, so we shouldn't need to grab any more memory */
-+ _dl_malloc_addr = malloc_buffer;
-+ _dl_mmap_zero = mmap_zero;
-+
-+
-+
-+ /* Now we have done the mandatory linking of some things. We are now
-+ free to start using global variables, since these things have all been
-+ fixed up by now. Still no function calls outside of this library ,
-+ since the dynamic resolver is not yet ready. */
-+ _dl_get_ready_to_run(tpnt, app_tpnt, load_addr, hash_addr, auxvt, envp, debug_addr);
-+
-+
-+ /* Notify the debugger that all objects are now mapped in. */
-+ _dl_debug_addr->r_state = RT_CONSISTENT;
-+ _dl_debug_state();
-+
-+
-+ /* OK we are done here. Turn out the lights, and lock up. */
-+ _dl_elf_main = (int (*)(int, char **, char **)) auxvt[AT_ENTRY].a_un.a_fcn;
-+
-+ /*
-+ * Transfer control to the application.
-+ */
-+ status = 0; /* Used on x86, but not on other arches */
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file,"\ntransfering control: %s\n\n", _dl_progname);
-+#endif
-+ START();
-+}
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static void debug_fini (int status, void *arg)
-+{
-+ (void)status;
-+ _dl_dprintf(_dl_debug_file,"\ncalling fini: %s\n\n", (const char*)arg);
-+}
-+#endif
-+
-+static void _dl_get_ready_to_run(struct elf_resolve *tpnt, struct elf_resolve *app_tpnt,
-+ unsigned long load_addr, unsigned long *hash_addr, Elf32_auxv_t auxvt[AT_EGID + 1],
-+ char **envp, struct r_debug *debug_addr)
-+{
-+ ElfW(Phdr) *ppnt;
-+ char *lpntstr;
-+ int i, _dl_secure, goof = 0;
-+ struct dyn_elf *rpnt;
-+ struct elf_resolve *tcurr;
-+ struct elf_resolve *tpnt1;
-+ unsigned long brk_addr, *lpnt;
-+ int (*_dl_atexit) (void *);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ int (*_dl_on_exit) (void (*FUNCTION)(int STATUS, void *ARG),void*);
-+#endif
-+
-+ /* Now we have done the mandatory linking of some things. We are now
-+ free to start using global variables, since these things have all been
-+ fixed up by now. Still no function calls outside of this library ,
-+ since the dynamic resolver is not yet ready. */
-+ lpnt = (unsigned long *) (tpnt->dynamic_info[DT_PLTGOT] + load_addr);
-+
-+ tpnt->chains = hash_addr;
-+ tpnt->next = 0;
-+ tpnt->libname = 0;
-+ tpnt->libtype = program_interpreter;
-+ tpnt->loadaddr = (ElfW(Addr)) load_addr;
-+
-+#ifdef ALLOW_ZERO_PLTGOT
-+ if (tpnt->dynamic_info[DT_PLTGOT])
-+#endif
-+ {
-+ INIT_GOT(lpnt, tpnt);
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "GOT found at %x\n", lpnt);
-+#endif
-+ }
-+
-+ /* OK, this was a big step, now we need to scan all of the user images
-+ and load them properly. */
-+
-+ {
-+ ElfW(Ehdr) *epnt;
-+ ElfW(Phdr) *myppnt;
-+ int j;
-+
-+ epnt = (ElfW(Ehdr) *) auxvt[AT_BASE].a_un.a_ptr;
-+ tpnt->n_phent = epnt->e_phnum;
-+ tpnt->ppnt = myppnt = (ElfW(Phdr) *) (load_addr + epnt->e_phoff);
-+ for (j = 0; j < epnt->e_phnum; j++, myppnt++) {
-+ if (myppnt->p_type == PT_DYNAMIC) {
-+ tpnt->dynamic_addr = (ElfW(Dyn) *)myppnt->p_vaddr + load_addr;
-+ tpnt->dynamic_size = myppnt->p_filesz;
-+ }
-+ }
-+ }
-+
-+ brk_addr = 0;
-+ rpnt = NULL;
-+
-+ /* At this point we are now free to examine the user application,
-+ and figure out which libraries are supposed to be called. Until
-+ we have this list, we will not be completely ready for dynamic linking */
-+
-+ ppnt = (ElfW(Phdr) *) auxvt[AT_PHDR].a_un.a_ptr;
-+ for (i = 0; i < auxvt[AT_PHNUM].a_un.a_val; i++, ppnt++) {
-+ if (ppnt->p_type == PT_LOAD) {
-+ if (ppnt->p_vaddr + ppnt->p_memsz > brk_addr)
-+ brk_addr = ppnt->p_vaddr + ppnt->p_memsz;
-+ }
-+ if (ppnt->p_type == PT_DYNAMIC) {
-+#ifndef ALLOW_ZERO_PLTGOT
-+ /* make sure it's really there. */
-+ if (app_tpnt->dynamic_info[DT_PLTGOT] == 0)
-+ continue;
-+#endif
-+ /* OK, we have what we need - slip this one into the list. */
-+ app_tpnt = _dl_add_elf_hash_table("", 0,
-+ app_tpnt->dynamic_info, ppnt->p_vaddr, ppnt->p_filesz);
-+ _dl_loaded_modules->libtype = elf_executable;
-+ _dl_loaded_modules->ppnt = (ElfW(Phdr) *) auxvt[AT_PHDR].a_un.a_ptr;
-+ _dl_loaded_modules->n_phent = auxvt[AT_PHNUM].a_un.a_val;
-+ _dl_symbol_tables = rpnt = (struct dyn_elf *) _dl_malloc(sizeof(struct dyn_elf));
-+ _dl_memset(rpnt, 0, sizeof(struct dyn_elf));
-+ rpnt->dyn = _dl_loaded_modules;
-+ app_tpnt->usage_count++;
-+ app_tpnt->symbol_scope = _dl_symbol_tables;
-+ lpnt = (unsigned long *) (app_tpnt->dynamic_info[DT_PLTGOT]);
-+#ifdef ALLOW_ZERO_PLTGOT
-+ if (lpnt)
-+#endif
-+ INIT_GOT(lpnt, _dl_loaded_modules);
-+ }
-+
-+ /* OK, fill this in - we did not have this before */
-+ if (ppnt->p_type == PT_INTERP) {
-+ int readsize = 0;
-+ char *pnt, *pnt1, buf[1024];
-+ tpnt->libname = _dl_strdup((char *) ppnt->p_offset +
-+ (auxvt[AT_PHDR].a_un.a_val & PAGE_ALIGN));
-+
-+ /* Determine if the shared lib loader is a symlink */
-+ _dl_memset(buf, 0, sizeof(buf));
-+ readsize = _dl_readlink(tpnt->libname, buf, sizeof(buf));
-+ if (readsize > 0 && readsize < (int)(sizeof(buf)-1)) {
-+ pnt1 = _dl_strrchr(buf, '/');
-+ if (pnt1 && buf != pnt1) {
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "changing tpnt->libname from '%s' to '%s'\n", tpnt->libname, buf);
-+#endif
-+ tpnt->libname = _dl_strdup(buf);
-+ }
-+ }
-+
-+ /* Store the path where the shared lib loader was found for
-+ * later use */
-+ pnt = _dl_strdup(tpnt->libname);
-+ pnt1 = _dl_strrchr(pnt, '/');
-+ if (pnt != pnt1) {
-+ *pnt1 = '\0';
-+ _dl_ldsopath = pnt;
-+ } else {
-+ _dl_ldsopath = tpnt->libname;
-+ }
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "Lib Loader:\t(%x) %s\n", tpnt->loadaddr, tpnt->libname);
-+#endif
-+ }
-+ }
-+
-+
-+ /* Now we need to figure out what kind of options are selected.
-+ Note that for SUID programs we ignore the settings in LD_LIBRARY_PATH */
-+ {
-+ if (_dl_getenv("LD_BIND_NOW", envp))
-+ _dl_be_lazy = 0;
-+
-+ if ((auxvt[AT_UID].a_un.a_val == -1 && _dl_suid_ok()) ||
-+ (auxvt[AT_UID].a_un.a_val != -1 &&
-+ auxvt[AT_UID].a_un.a_val == auxvt[AT_EUID].a_un.a_val
-+ && auxvt[AT_GID].a_un.a_val== auxvt[AT_EGID].a_un.a_val)) {
-+ _dl_secure = 0;
-+ _dl_preload = _dl_getenv("LD_PRELOAD", envp);
-+ _dl_library_path = _dl_getenv("LD_LIBRARY_PATH", envp);
-+ } else {
-+ _dl_secure = 1;
-+ _dl_preload = _dl_getenv("LD_PRELOAD", envp);
-+ _dl_unsetenv("LD_AOUT_PRELOAD", envp);
-+ _dl_unsetenv("LD_LIBRARY_PATH", envp);
-+ _dl_unsetenv("LD_AOUT_LIBRARY_PATH", envp);
-+ _dl_library_path = NULL;
-+ }
-+ }
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ _dl_debug = _dl_getenv("LD_DEBUG", envp);
-+ if (_dl_debug)
-+ {
-+ if (_dl_strstr(_dl_debug, "all")) {
-+ _dl_debug_detail = _dl_debug_move = _dl_debug_symbols
-+ = _dl_debug_reloc = _dl_debug_bindings = _dl_debug_nofixups = _dl_strstr(_dl_debug, "all");
-+ }
-+ else {
-+ _dl_debug_detail = _dl_strstr(_dl_debug, "detail");
-+ _dl_debug_move = _dl_strstr(_dl_debug, "move");
-+ _dl_debug_symbols = _dl_strstr(_dl_debug, "sym");
-+ _dl_debug_reloc = _dl_strstr(_dl_debug, "reloc");
-+ _dl_debug_nofixups = _dl_strstr(_dl_debug, "nofix");
-+ _dl_debug_bindings = _dl_strstr(_dl_debug, "bind");
-+ }
-+ }
-+ {
-+ const char *dl_debug_output;
-+
-+ dl_debug_output = _dl_getenv("LD_DEBUG_OUTPUT", envp);
-+
-+ if (dl_debug_output)
-+ {
-+ char tmp[22], *tmp1, *filename;
-+ int len1, len2;
-+
-+ _dl_memset(tmp, 0, sizeof(tmp));
-+ tmp1=_dl_simple_ltoa( tmp, (unsigned long)_dl_getpid());
-+
-+ len1 = _dl_strlen(dl_debug_output);
-+ len2 = _dl_strlen(tmp1);
-+
-+ filename = _dl_malloc(len1+len2+2);
-+
-+ if (filename)
-+ {
-+ _dl_strcpy (filename, dl_debug_output);
-+ filename[len1] = '.';
-+ _dl_strcpy (&filename[len1+1], tmp1);
-+
-+ _dl_debug_file= _dl_open (filename, O_WRONLY|O_CREAT);
-+ if (_dl_debug_file<0)
-+ {
-+ _dl_debug_file = 2;
-+ _dl_dprintf (2, "can't open file: '%s'\n",filename);
-+ }
-+ }
-+ }
-+ }
-+
-+
-+#endif
-+ _dl_trace_loaded_objects = _dl_getenv("LD_TRACE_LOADED_OBJECTS", envp);
-+#ifndef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects) {
-+ _dl_dprintf(_dl_debug_file, "Use the ldd provided by uClibc\n");
-+ _dl_exit(1);
-+ }
-+#endif
-+
-+ /*
-+ * OK, fix one more thing - set up debug_addr so it will point
-+ * to our chain. Later we may need to fill in more fields, but this
-+ * should be enough for now.
-+ */
-+ debug_addr->r_map = (struct link_map *) _dl_loaded_modules;
-+ debug_addr->r_version = 1;
-+ debug_addr->r_ldbase = load_addr;
-+ debug_addr->r_brk = (unsigned long) &_dl_debug_state;
-+ _dl_debug_addr = debug_addr;
-+
-+ /* Notify the debugger we are in a consistant state */
-+ _dl_debug_addr->r_state = RT_CONSISTENT;
-+ _dl_debug_state();
-+
-+ /* OK, we now have the application in the list, and we have some
-+ basic stuff in place. Now search through the list for other shared
-+ libraries that should be loaded, and insert them on the list in the
-+ correct order. */
-+
-+ _dl_map_cache();
-+
-+
-+ if (_dl_preload)
-+ {
-+ char c, *str, *str2;
-+
-+ str = _dl_preload;
-+ while (*str == ':' || *str == ' ' || *str == '\t')
-+ str++;
-+ while (*str)
-+ {
-+ str2 = str;
-+ while (*str2 && *str2 != ':' && *str2 != ' ' && *str2 != '\t')
-+ str2++;
-+ c = *str2;
-+ *str2 = '\0';
-+ if (!_dl_secure || _dl_strchr(str, '/') == NULL)
-+ {
-+ if ((tpnt1 = _dl_check_if_named_library_is_loaded(str)))
-+ {
-+ continue;
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tfile='%s'; needed by '%s'\n",
-+ str, _dl_progname);
-+#endif
-+ tpnt1 = _dl_load_shared_library(_dl_secure, &rpnt, NULL, str);
-+ if (!tpnt1) {
-+#ifdef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects)
-+ _dl_dprintf(1, "\t%s => not found\n", str);
-+ else
-+#endif
-+ {
-+ _dl_dprintf(2, "%s: can't load " "library '%s'\n", _dl_progname, str);
-+ _dl_exit(15);
-+ }
-+ } else {
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "Loading:\t(%x) %s\n", tpnt1->loadaddr, tpnt1->libname);
-+#endif
-+#ifdef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects && tpnt1->usage_count==1) {
-+ /* this is a real hack to make ldd not print
-+ * the library itself when run on a library. */
-+ if (_dl_strcmp(_dl_progname, str) != 0)
-+ _dl_dprintf(1, "\t%s => %s (%x)\n", str, tpnt1->libname,
-+ (unsigned) tpnt1->loadaddr);
-+ }
-+#endif
-+ }
-+ }
-+ *str2 = c;
-+ str = str2;
-+ while (*str == ':' || *str == ' ' || *str == '\t')
-+ str++;
-+ }
-+ }
-+
-+#ifdef SUPPORT_LDSO_PRELOAD_FILE
-+ {
-+ int fd;
-+ struct stat st;
-+ char *preload;
-+ if (!_dl_stat(LDSO_PRELOAD, &st) && st.st_size > 0) {
-+ if ((fd = _dl_open(LDSO_PRELOAD, O_RDONLY)) < 0) {
-+ _dl_dprintf(2, "%s: can't open file '%s'\n",
-+ _dl_progname, LDSO_PRELOAD);
-+ } else {
-+ preload = (caddr_t) _dl_mmap(0, st.st_size + 1,
-+ PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
-+ _dl_close(fd);
-+ if (preload == (caddr_t) - 1) {
-+ _dl_dprintf(2, "%s: can't map file '%s'\n",
-+ _dl_progname, LDSO_PRELOAD);
-+ } else {
-+ char c, *cp, *cp2;
-+
-+ /* convert all separators and comments to spaces */
-+ for (cp = preload; *cp; /*nada */ ) {
-+ if (*cp == ':' || *cp == '\t' || *cp == '\n') {
-+ *cp++ = ' ';
-+ } else if (*cp == '#') {
-+ do
-+ *cp++ = ' ';
-+ while (*cp != '\n' && *cp != '\0');
-+ } else {
-+ cp++;
-+ }
-+ }
-+
-+ /* find start of first library */
-+ for (cp = preload; *cp && *cp == ' '; cp++)
-+ /*nada */ ;
-+
-+ while (*cp) {
-+ /* find end of library */
-+ for (cp2 = cp; *cp && *cp != ' '; cp++)
-+ /*nada */ ;
-+ c = *cp;
-+ *cp = '\0';
-+
-+ if ((tpnt1 = _dl_check_if_named_library_is_loaded(cp2)))
-+ {
-+ continue;
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tfile='%s'; needed by '%s'\n",
-+ cp2, _dl_progname);
-+#endif
-+ tpnt1 = _dl_load_shared_library(0, &rpnt, NULL, cp2);
-+ if (!tpnt1) {
-+#ifdef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects)
-+ _dl_dprintf(1, "\t%s => not found\n", cp2);
-+ else
-+#endif
-+ {
-+ _dl_dprintf(2, "%s: can't load library '%s'\n", _dl_progname, cp2);
-+ _dl_exit(15);
-+ }
-+ } else {
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "Loading:\t(%x) %s\n", tpnt1->loadaddr, tpnt1->libname);
-+#endif
-+#ifdef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects && tpnt1->usage_count==1) {
-+ _dl_dprintf(1, "\t%s => %s (%x)\n", cp2,
-+ tpnt1->libname, (unsigned) tpnt1->loadaddr);
-+ }
-+#endif
-+ }
-+
-+ /* find start of next library */
-+ *cp = c;
-+ for ( /*nada */ ; *cp && *cp == ' '; cp++)
-+ /*nada */ ;
-+ }
-+
-+ _dl_munmap(preload, st.st_size + 1);
-+ }
-+ }
-+ }
-+ }
-+#endif
-+
-+ for (tcurr = _dl_loaded_modules; tcurr; tcurr = tcurr->next)
-+ {
-+ Elf32_Dyn *dpnt;
-+ for (dpnt = (Elf32_Dyn *) tcurr->dynamic_addr; dpnt->d_tag; dpnt++)
-+ {
-+ if (dpnt->d_tag == DT_NEEDED)
-+ {
-+ char *name;
-+ lpntstr = (char*) (tcurr->loadaddr + tcurr->dynamic_info[DT_STRTAB] + dpnt->d_un.d_val);
-+ name = _dl_get_last_path_component(lpntstr);
-+
-+ if ((tpnt1 = _dl_check_if_named_library_is_loaded(name)))
-+ {
-+ continue;
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tfile='%s'; needed by '%s'\n",
-+ lpntstr, _dl_progname);
-+#endif
-+ if (!(tpnt1 = _dl_load_shared_library(0, &rpnt, tcurr, lpntstr)))
-+ {
-+#ifdef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects) {
-+ _dl_dprintf(1, "\t%s => not found\n", lpntstr);
-+ continue;
-+ } else
-+#endif
-+ {
-+ _dl_dprintf(2, "%s: can't load library '%s'\n", _dl_progname, lpntstr);
-+ _dl_exit(16);
-+ }
-+ } else {
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "Loading:\t(%x) %s\n", tpnt1->loadaddr, tpnt1->libname);
-+#endif
-+#ifdef __LDSO_LDD_SUPPORT__
-+ if (_dl_trace_loaded_objects && tpnt1->usage_count==1) {
-+ _dl_dprintf(1, "\t%s => %s (%x)\n", lpntstr, tpnt1->libname,
-+ (unsigned) tpnt1->loadaddr);
-+ }
-+#endif
-+ }
-+ }
-+ }
-+ }
-+
-+
-+ _dl_unmap_cache();
-+
-+ /*
-+ * If the program interpreter is not in the module chain, add it. This will
-+ * be required for dlopen to be able to access the internal functions in the
-+ * dynamic linker.
-+ */
-+ if (tpnt) {
-+ tcurr = _dl_loaded_modules;
-+ if (tcurr)
-+ while (tcurr->next)
-+ tcurr = tcurr->next;
-+ tpnt->next = NULL;
-+ tpnt->usage_count++;
-+
-+ if (tcurr) {
-+ tcurr->next = tpnt;
-+ tpnt->prev = tcurr;
-+ } else {
-+ _dl_loaded_modules = tpnt;
-+ tpnt->prev = NULL;
-+ }
-+ if (rpnt) {
-+ rpnt->next = (struct dyn_elf *) _dl_malloc(sizeof(struct dyn_elf));
-+ _dl_memset(rpnt->next, 0, sizeof(struct dyn_elf));
-+ rpnt->next->prev = rpnt;
-+ rpnt = rpnt->next;
-+ } else {
-+ rpnt = (struct dyn_elf *) _dl_malloc(sizeof(struct dyn_elf));
-+ _dl_memset(rpnt, 0, sizeof(struct dyn_elf));
-+ }
-+ rpnt->dyn = tpnt;
-+ tpnt = NULL;
-+ }
-+
-+#ifdef __LDSO_LDD_SUPPORT__
-+ /* End of the line for ldd.... */
-+ if (_dl_trace_loaded_objects) {
-+ _dl_dprintf(1, "\t%s => %s (%x)\n", rpnt->dyn->libname + (_dl_strlen(_dl_ldsopath)) + 1,
-+ rpnt->dyn->libname, rpnt->dyn->loadaddr);
-+ _dl_exit(0);
-+ }
-+#endif
-+
-+
-+#ifdef __mips__
-+ /*
-+ * Relocation of the GOT entries for MIPS have to be done
-+ * after all the libraries have been loaded.
-+ */
-+ _dl_perform_mips_global_got_relocations(_dl_loaded_modules);
-+#endif
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "Beginning relocation fixups\n");
-+#endif
-+ /*
-+ * OK, now all of the kids are tucked into bed in their proper addresses.
-+ * Now we go through and look for REL and RELA records that indicate fixups
-+ * to the GOT tables. We need to do this in reverse order so that COPY
-+ * directives work correctly */
-+ goof = _dl_loaded_modules ? _dl_fixup(_dl_loaded_modules, _dl_be_lazy) : 0;
-+
-+
-+ /* Some flavors of SVr4 do not generate the R_*_COPY directive,
-+ and we have to manually search for entries that require fixups.
-+ Solaris gets this one right, from what I understand. */
-+
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(_dl_debug_file, "Beginning copy fixups\n");
-+#endif
-+ if (_dl_symbol_tables)
-+ goof += _dl_copy_fixups(_dl_symbol_tables);
-+
-+ /* OK, at this point things are pretty much ready to run. Now we
-+ need to touch up a few items that are required, and then
-+ we can let the user application have at it. Note that
-+ the dynamic linker itself is not guaranteed to be fully
-+ dynamicly linked if we are using ld.so.1, so we have to look
-+ up each symbol individually. */
-+
-+
-+ _dl_brkp = (unsigned long *) (intptr_t) _dl_find_hash("___brk_addr", NULL, NULL, symbolrel);
-+
-+ if (_dl_brkp) {
-+ *_dl_brkp = brk_addr;
-+ }
-+ _dl_envp = (unsigned long *) (intptr_t) _dl_find_hash("__environ", NULL, NULL, symbolrel);
-+
-+ if (_dl_envp) {
-+ *_dl_envp = (unsigned long) envp;
-+ }
-+
-+#ifndef FORCE_SHAREABLE_TEXT_SEGMENTS
-+ {
-+ unsigned int j;
-+ ElfW(Phdr) *myppnt;
-+
-+ /* We had to set the protections of all pages to R/W for dynamic linking.
-+ Set text pages back to R/O */
-+ for (tpnt = _dl_loaded_modules; tpnt; tpnt = tpnt->next) {
-+ for (myppnt = tpnt->ppnt, j = 0; j < tpnt->n_phent; j++, myppnt++) {
-+ if (myppnt->p_type == PT_LOAD && !(myppnt->p_flags & PF_W) && tpnt->dynamic_info[DT_TEXTREL]) {
-+ _dl_mprotect((void *) (tpnt->loadaddr + (myppnt->p_vaddr & PAGE_ALIGN)),
-+ (myppnt->p_vaddr & ADDR_ALIGN) + (unsigned long) myppnt->p_filesz, LXFLAGS(myppnt->p_flags));
-+ }
-+ }
-+ }
-+
-+ }
-+#endif
-+ _dl_atexit = (int (*)(void *)) (intptr_t) _dl_find_hash("atexit", NULL, NULL, symbolrel);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_on_exit = (int (*)(void (*)(int, void *),void*))
-+ (intptr_t) _dl_find_hash("on_exit", NULL, NULL, symbolrel);
-+#endif
-+
-+ /* Notify the debugger we have added some objects. */
-+ _dl_debug_addr->r_state = RT_ADD;
-+ _dl_debug_state();
-+
-+ for (rpnt = _dl_symbol_tables; rpnt!=NULL&& rpnt->next!=NULL; rpnt=rpnt->next)
-+ ;
-+
-+ for (;rpnt!=NULL; rpnt=rpnt->prev)
-+ {
-+ tpnt = rpnt->dyn;
-+
-+ if (tpnt->libtype == program_interpreter)
-+ continue;
-+
-+ /* Apparently crt0/1 for the application is responsible for handling this.
-+ * We only need to run the init/fini for shared libraries
-+ */
-+ if (tpnt->libtype == elf_executable)
-+ break; /* at this point all shared libs are initialized !! */
-+
-+ if (tpnt->init_flag & INIT_FUNCS_CALLED)
-+ continue;
-+ tpnt->init_flag |= INIT_FUNCS_CALLED;
-+
-+ if (tpnt->dynamic_info[DT_INIT]) {
-+ void (*dl_elf_func) (void);
-+ dl_elf_func = (void (*)(void)) (intptr_t) (tpnt->loadaddr + tpnt->dynamic_info[DT_INIT]);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file,"\ncalling init: %s\n\n", tpnt->libname);
-+#endif
-+ (*dl_elf_func) ();
-+ }
-+ if (_dl_atexit && tpnt->dynamic_info[DT_FINI]) {
-+ void (*dl_elf_func) (void);
-+ dl_elf_func = (void (*)(void)) (intptr_t) (tpnt->loadaddr + tpnt->dynamic_info[DT_FINI]);
-+ (*_dl_atexit) (dl_elf_func);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug && _dl_on_exit)
-+ {
-+ (*_dl_on_exit)(debug_fini, tpnt->libname);
-+ }
-+#endif
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ else {
-+ if (!_dl_atexit)
-+ _dl_dprintf(_dl_debug_file, "%s: The address of atexit () is 0x0.\n", tpnt->libname);
-+#if 0
-+ if (!tpnt->dynamic_info[DT_FINI])
-+ _dl_dprintf(_dl_debug_file, "%s: Invalid .fini section.\n", tpnt->libname);
-+#endif
-+ }
-+#endif
-+ }
-+}
-+
-+/*
-+ * This stub function is used by some debuggers. The idea is that they
-+ * can set an internal breakpoint on it, so that we are notified when the
-+ * address mapping is changed in some way.
-+ */
-+void _dl_debug_state(void)
-+{
-+}
-+
-+char *_dl_getenv(const char *symbol, char **envp)
-+{
-+ char *pnt;
-+ const char *pnt1;
-+
-+ while ((pnt = *envp++)) {
-+ pnt1 = symbol;
-+ while (*pnt && *pnt == *pnt1)
-+ pnt1++, pnt++;
-+ if (!*pnt || *pnt != '=' || *pnt1)
-+ continue;
-+ return pnt + 1;
-+ }
-+ return 0;
-+}
-+
-+void _dl_unsetenv(const char *symbol, char **envp)
-+{
-+ char *pnt;
-+ const char *pnt1;
-+ char **newenvp = envp;
-+
-+ for (pnt = *envp; pnt; pnt = *++envp) {
-+ pnt1 = symbol;
-+ while (*pnt && *pnt == *pnt1)
-+ pnt1++, pnt++;
-+ if (!*pnt || *pnt != '=' || *pnt1)
-+ *newenvp++ = *envp;
-+ }
-+ *newenvp++ = *envp;
-+ return;
-+}
-+
-+#include "hash.c"
-+#include "readelflib1.c"
-diff -urN uClibc/ldso-0.9.24/ldso/m68k/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/m68k/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/m68k/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/m68k/boot1_arch.h 2002-08-08 09:35:37.000000000 -0500
-@@ -0,0 +1,7 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture. See arm/boot1_arch.h for an example of what
-+ * can be done.
-+ */
-+
-+#define LD_BOOT(X) void _dl_boot (X)
-diff -urN uClibc/ldso-0.9.24/ldso/m68k/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/m68k/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/m68k/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/m68k/elfinterp.c 2002-11-05 12:21:04.000000000 -0600
-@@ -0,0 +1,359 @@
-+/* vi: set sw=4 ts=4: */
-+/* m68k ELF shared library loader suppport
-+ *
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
-+ * David Engel, Hongjiu Lu and Mitch D'Souza
-+ * Adapted to ELF/68k by Andreas Schwab.
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes[] =
-+{
-+ "R_68K_NONE",
-+ "R_68K_32", "R_68K_16", "R_68K_8",
-+ "R_68K_PC32", "R_68K_PC16", "R_68K_PC8",
-+ "R_68K_GOT32", "R_68K_GOT16", "R_68K_GOT8",
-+ "R_68K_GOT32O", "R_68K_GOT16O", "R_68K_GOT8O",
-+ "R_68K_PLT32", "R_68K_PLT16", "R_68K_PLT8",
-+ "R_68K_PLT32O", "R_68K_PLT16O", "R_68K_PLT8O",
-+ "R_68K_COPY", "R_68K_GLOB_DAT", "R_68K_JMP_SLOT", "R_68K_RELATIVE",
-+ "R_68K_NUM"
-+};
-+#endif
-+
-+/* Program to load an ELF binary on a linux system, and run it.
-+ References to symbols in sharable libraries can be resolved by either
-+ an ELF sharable library or a linux style of shared library. */
-+
-+/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
-+ I ever taken any courses on internals. This program was developed using
-+ information available through the book "UNIX SYSTEM V RELEASE 4,
-+ Programmers guide: Ansi C and Programming Support Tools", which did
-+ a more than adequate job of explaining everything required to get this
-+ working. */
-+
-+
-+unsigned int _dl_linux_resolver (int dummy1, int dummy2,
-+ struct elf_resolve *tpnt, int reloc_entry)
-+{
-+ int reloc_type;
-+ Elf32_Rela *this_reloc;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ char *rel_addr;
-+ int symtab_index;
-+ char *new_addr;
-+ char **got_addr;
-+ unsigned int instr_addr;
-+
-+ rel_addr = tpnt->loadaddr + tpnt->dynamic_info[DT_JMPREL];
-+ this_reloc = (Elf32_Rela *) (rel_addr + reloc_entry);
-+ reloc_type = ELF32_R_TYPE (this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM (this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB]
-+ + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+
-+ if (reloc_type != R_68K_JMP_SLOT)
-+ {
-+ _dl_dprintf (2, "%s: incorrect relocation type in jump relocations\n",
-+ _dl_progname);
-+ _dl_exit (1);
-+ }
-+
-+ /* Address of jump instruction to fix up. */
-+ instr_addr = (int) this_reloc->r_offset + (int) tpnt->loadaddr;
-+ got_addr = (char **) instr_addr;
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if (_dl_debug_symbols) {
-+ _dl_dprintf (2, "Resolving symbol %s\n", strtab + symtab[symtab_index].st_name);
-+ }
-+#endif
-+
-+ /* Get the address of the GOT entry. */
-+ new_addr = _dl_find_hash (strtab + symtab[symtab_index].st_name,
-+ tpnt->symbol_scope, tpnt, resolver);
-+ if (!new_addr)
-+ {
-+ _dl_dprintf (2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ _dl_exit (1);
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if ((unsigned long) got_addr < 0x40000000)
-+ {
-+ if (_dl_debug_bindings)
-+ {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s",
-+ strtab + symtab[symtab_index].st_name);
-+ if(_dl_debug_detail) _dl_dprintf(_dl_debug_file,
-+ "\tpatch %x ==> %x @ %x", *got_addr, new_addr, got_addr);
-+ }
-+ }
-+ if (!_dl_debug_nofixups) {
-+ *got_addr = new_addr;
-+ }
-+#else
-+ *got_addr = new_addr;
-+#endif
-+
-+ return (unsigned int) new_addr;
-+}
-+
-+void
-+_dl_parse_lazy_relocation_information (struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ int i;
-+ char *strtab;
-+ int reloc_type;
-+ int symtab_index;
-+ Elf32_Sym *symtab;
-+ Elf32_Rela *rpnt;
-+ unsigned int *reloc_addr;
-+
-+ /* Now parse the relocation information. */
-+ rpnt = (Elf32_Rela *) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof (Elf32_Rela);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB]
-+ + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++)
-+ {
-+ reloc_addr = (int *) (tpnt->loadaddr + (int) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE (rpnt->r_info);
-+ symtab_index = ELF32_R_SYM (rpnt->r_info);
-+
-+ /* When the dynamic linker bootstrapped itself, it resolved some symbols.
-+ Make sure we do not do them again. */
-+ if (tpnt->libtype == program_interpreter
-+ && (!symtab_index
-+ || _dl_symbol (strtab + symtab[symtab_index].st_name)))
-+ continue;
-+
-+ switch (reloc_type)
-+ {
-+ case R_68K_NONE:
-+ break;
-+ case R_68K_JMP_SLOT:
-+ *reloc_addr += (unsigned int) tpnt->loadaddr;
-+ break;
-+ default:
-+ _dl_dprintf (2, "%s: (LAZY) can't handle reloc type ", _dl_progname);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf (2, "%s ", _dl_reltypes[reloc_type]);
-+#endif
-+ if (symtab_index)
-+ _dl_dprintf (2, "'%s'", strtab + symtab[symtab_index].st_name);
-+ _dl_dprintf (2, "\n");
-+ _dl_exit (1);
-+ }
-+ }
-+}
-+
-+int
-+_dl_parse_relocation_information (struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ int i;
-+ char *strtab;
-+ int reloc_type;
-+ int goof = 0;
-+ Elf32_Sym *symtab;
-+ Elf32_Rela *rpnt;
-+ unsigned int *reloc_addr;
-+ unsigned int symbol_addr;
-+ int symtab_index;
-+ /* Now parse the relocation information */
-+
-+ rpnt = (Elf32_Rela *) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof (Elf32_Rela);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB]
-+ + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++)
-+ {
-+ reloc_addr = (int *) (tpnt->loadaddr + (int) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE (rpnt->r_info);
-+ symtab_index = ELF32_R_SYM (rpnt->r_info);
-+ symbol_addr = 0;
-+
-+ if (tpnt->libtype == program_interpreter
-+ && (!symtab_index
-+ || _dl_symbol (strtab + symtab[symtab_index].st_name)))
-+ continue;
-+
-+ if (symtab_index)
-+ {
-+ symbol_addr = (unsigned int)
-+ _dl_find_hash (strtab + symtab[symtab_index].st_name,
-+ tpnt->symbol_scope,
-+ reloc_type == R_68K_JMP_SLOT ? tpnt : NULL, symbolrel);
-+
-+ /* We want to allow undefined references to weak symbols -
-+ this might have been intentional. We should not be
-+ linking local symbols here, so all bases should be
-+ covered. */
-+ if (!symbol_addr
-+ && ELF32_ST_BIND (symtab[symtab_index].st_info) == STB_GLOBAL)
-+ {
-+ _dl_dprintf (2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ goof++;
-+ }
-+ }
-+ switch (reloc_type)
-+ {
-+ case R_68K_NONE:
-+ break;
-+ case R_68K_8:
-+ *(char *) reloc_addr = symbol_addr + rpnt->r_addend;
-+ break;
-+ case R_68K_16:
-+ *(short *) reloc_addr = symbol_addr + rpnt->r_addend;
-+ break;
-+ case R_68K_32:
-+ *reloc_addr = symbol_addr + rpnt->r_addend;
-+ break;
-+ case R_68K_PC8:
-+ *(char *) reloc_addr = (symbol_addr + rpnt->r_addend
-+ - (unsigned int) reloc_addr);
-+ break;
-+ case R_68K_PC16:
-+ *(short *) reloc_addr = (symbol_addr + rpnt->r_addend
-+ - (unsigned int) reloc_addr);
-+ break;
-+ case R_68K_PC32:
-+ *reloc_addr = (symbol_addr + rpnt->r_addend
-+ - (unsigned int) reloc_addr);
-+ break;
-+ case R_68K_GLOB_DAT:
-+ case R_68K_JMP_SLOT:
-+ *reloc_addr = symbol_addr;
-+ break;
-+ case R_68K_RELATIVE:
-+ *reloc_addr = ((unsigned int) tpnt->loadaddr
-+ /* Compatibility kludge. */
-+ + (rpnt->r_addend ? : *reloc_addr));
-+ break;
-+ case R_68K_COPY:
-+#if 0 /* Do this later. */
-+ _dl_dprintf (2, "Doing copy");
-+ if (symtab_index)
-+ _dl_dprintf (2, " for symbol %s",
-+ strtab + symtab[symtab_index].st_name);
-+ _dl_dprintf (2, "\n");
-+ _dl_memcpy ((void *) symtab[symtab_index].st_value,
-+ (void *) symbol_addr,
-+ symtab[symtab_index].st_size);
-+#endif
-+ break;
-+ default:
-+ _dl_dprintf (2, "%s: can't handle reloc type ", _dl_progname);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf (2, "%s ", _dl_reltypes[reloc_type]);
-+#endif
-+ if (symtab_index)
-+ _dl_dprintf (2, "'%s'", strtab + symtab[symtab_index].st_name);
-+ _dl_dprintf (2, "\n");
-+ _dl_exit (1);
-+ }
-+
-+ }
-+ return goof;
-+}
-+
-+/* This is done as a separate step, because there are cases where
-+ information is first copied and later initialized. This results in
-+ the wrong information being copied. Someone at Sun was complaining about
-+ a bug in the handling of _COPY by SVr4, and this may in fact be what he
-+ was talking about. Sigh. */
-+
-+/* No, there are cases where the SVr4 linker fails to emit COPY relocs
-+ at all. */
-+
-+int
-+_dl_parse_copy_information (struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ int i;
-+ char *strtab;
-+ int reloc_type;
-+ int goof = 0;
-+ Elf32_Sym *symtab;
-+ Elf32_Rela *rpnt;
-+ unsigned int *reloc_addr;
-+ unsigned int symbol_addr;
-+ struct elf_resolve *tpnt;
-+ int symtab_index;
-+ /* Now parse the relocation information */
-+
-+ tpnt = xpnt->dyn;
-+
-+ rpnt = (Elf32_Rela *) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof (Elf32_Rela);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB]
-+ + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++)
-+ {
-+ reloc_addr = (int *) (tpnt->loadaddr + (int) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE (rpnt->r_info);
-+ if (reloc_type != R_68K_COPY)
-+ continue;
-+ symtab_index = ELF32_R_SYM (rpnt->r_info);
-+ symbol_addr = 0;
-+ if (tpnt->libtype == program_interpreter
-+ && (!symtab_index
-+ || _dl_symbol (strtab + symtab[symtab_index].st_name)))
-+ continue;
-+ if (symtab_index)
-+ {
-+ symbol_addr = (unsigned int)
-+ _dl_find_hash (strtab + symtab[symtab_index].st_name,
-+ xpnt->next, NULL, copyrel);
-+ if (!symbol_addr)
-+ {
-+ _dl_dprintf (2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ goof++;
-+ }
-+ }
-+ if (!goof)
-+ _dl_memcpy ((void *) symtab[symtab_index].st_value, (void *) symbol_addr,
-+ symtab[symtab_index].st_size);
-+ }
-+ return goof;
-+}
-diff -urN uClibc/ldso-0.9.24/ldso/m68k/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/m68k/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/m68k/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/m68k/ld_syscalls.h 2002-03-19 04:43:32.000000000 -0600
-@@ -0,0 +1,174 @@
-+/*
-+ * This file contains the system call macros and syscall
-+ * numbers used by the shared library loader.
-+ */
-+
-+#define __NR_exit 1
-+#define __NR_read 3
-+#define __NR_write 4
-+#define __NR_open 5
-+#define __NR_close 6
-+#define __NR_getuid 24
-+#define __NR_geteuid 49
-+#define __NR_getgid 47
-+#define __NR_getegid 50
-+#define __NR_readlink 85
-+#define __NR_mmap 90
-+#define __NR_munmap 91
-+#define __NR_stat 106
-+#define __NR_mprotect 125
-+
-+
-+/* Here are the macros which define how this platform makes
-+ * system calls. This particular variant does _not_ set
-+ * errno (note how it is disabled in __syscall_return) since
-+ * these will get called before the errno symbol is dynamicly
-+ * linked. */
-+
-+
-+#define __syscall_return(type, res) \
-+do { \
-+ if ((unsigned long)(res) >= (unsigned long)(-125)) { \
-+ /* avoid using res which is declared to be in register d0; \
-+ errno might expand to a function call and clobber it. */ \
-+ /* int __err = -(res); \
-+ errno = __err; */ \
-+ res = -1; \
-+ } \
-+ return (type) (res); \
-+} while (0)
-+
-+#define _syscall0(type, name) \
-+type name(void) \
-+{ \
-+ long __res; \
-+ __asm__ __volatile__ ("movel %1, %%d0\n\t" \
-+ "trap #0\n\t" \
-+ "movel %%d0, %0" \
-+ : "=g" (__res) \
-+ : "i" (__NR_##name) \
-+ : "cc", "%d0"); \
-+ if ((unsigned long)(__res) >= (unsigned long)(-125)) { \
-+ /* errno = -__res; */ \
-+ __res = -1; \
-+ } \
-+ return (type)__res; \
-+}
-+
-+#define _syscall1(type, name, atype, a) \
-+type name(atype a) \
-+{ \
-+ long __res; \
-+ __asm__ __volatile__ ("movel %2, %%d1\n\t" \
-+ "movel %1, %%d0\n\t" \
-+ "trap #0\n\t" \
-+ "movel %%d0, %0" \
-+ : "=g" (__res) \
-+ : "i" (__NR_##name), \
-+ "g" ((long)a) \
-+ : "cc", "%d0", "%d1"); \
-+ if ((unsigned long)(__res) >= (unsigned long)(-125)) { \
-+ /* errno = -__res; */ \
-+ __res = -1; \
-+ } \
-+ return (type)__res; \
-+}
-+
-+#define _syscall2(type, name, atype, a, btype, b) \
-+type name(atype a, btype b) \
-+{ \
-+ long __res; \
-+ __asm__ __volatile__ ("movel %3, %%d2\n\t" \
-+ "movel %2, %%d1\n\t" \
-+ "movel %1, %%d0\n\t" \
-+ "trap #0\n\t" \
-+ "movel %%d0, %0" \
-+ : "=g" (__res) \
-+ : "i" (__NR_##name), \
-+ "a" ((long)a), \
-+ "g" ((long)b) \
-+ : "cc", "%d0", "%d1", "%d2"); \
-+ if ((unsigned long)(__res) >= (unsigned long)(-125)) { \
-+ /* errno = -__res; */ \
-+ __res = -1; \
-+ } \
-+ return (type)__res; \
-+}
-+
-+#define _syscall3(type, name, atype, a, btype, b, ctype, c) \
-+type name(atype a, btype b, ctype c) \
-+{ \
-+ long __res; \
-+ __asm__ __volatile__ ("movel %4, %%d3\n\t" \
-+ "movel %3, %%d2\n\t" \
-+ "movel %2, %%d1\n\t" \
-+ "movel %1, %%d0\n\t" \
-+ "trap #0\n\t" \
-+ "movel %%d0, %0" \
-+ : "=g" (__res) \
-+ : "i" (__NR_##name), \
-+ "a" ((long)a), \
-+ "a" ((long)b), \
-+ "g" ((long)c) \
-+ : "cc", "%d0", "%d1", "%d2", "%d3"); \
-+ if ((unsigned long)(__res) >= (unsigned long)(-125)) { \
-+ /* errno = -__res; */ \
-+ __res = -1; \
-+ } \
-+ return (type)__res; \
-+}
-+
-+#define _syscall4(type, name, atype, a, btype, b, ctype, c, dtype, d) \
-+type name(atype a, btype b, ctype c, dtype d) \
-+{ \
-+ long __res; \
-+ __asm__ __volatile__ ("movel %5, %%d4\n\t" \
-+ "movel %4, %%d3\n\t" \
-+ "movel %3, %%d2\n\t" \
-+ "movel %2, %%d1\n\t" \
-+ "movel %1, %%d0\n\t" \
-+ "trap #0\n\t" \
-+ "movel %%d0, %0" \
-+ : "=g" (__res) \
-+ : "i" (__NR_##name), \
-+ "a" ((long)a), \
-+ "a" ((long)b), \
-+ "a" ((long)c), \
-+ "g" ((long)d) \
-+ : "cc", "%d0", "%d1", "%d2", "%d3", \
-+ "%d4"); \
-+ if ((unsigned long)(__res) >= (unsigned long)(-125)) { \
-+ /* errno = -__res; */ \
-+ __res = -1; \
-+ } \
-+ return (type)__res; \
-+}
-+
-+#define _syscall5(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e)\
-+type name(atype a, btype b, ctype c, dtype d, etype e) \
-+{ \
-+ long __res; \
-+ __asm__ __volatile__ ("movel %6, %%d5\n\t" \
-+ "movel %5, %%d4\n\t" \
-+ "movel %4, %%d3\n\t" \
-+ "movel %3, %%d2\n\t" \
-+ "movel %2, %%d1\n\t" \
-+ "movel %1, %%d0\n\t" \
-+ "trap #0\n\t" \
-+ "movel %%d0, %0" \
-+ : "=g" (__res) \
-+ : "i" (__NR_##name), \
-+ "a" ((long)a), \
-+ "a" ((long)b), \
-+ "a" ((long)c), \
-+ "a" ((long)d), \
-+ "g" ((long)e) \
-+ : "cc", "%d0", "%d1", "%d2", "%d3", \
-+ "%d4", "%d5"); \
-+ if ((unsigned long)(__res) >= (unsigned long)(-125)) { \
-+ /* errno = -__res; */ \
-+ __res = -1; \
-+ } \
-+ return (type)__res; \
-+}
-+
-diff -urN uClibc/ldso-0.9.24/ldso/m68k/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/m68k/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/m68k/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/m68k/ld_sysdep.h 2002-05-28 16:33:34.000000000 -0500
-@@ -0,0 +1,88 @@
-+
-+/* Various assmbly language/system dependent hacks that are required
-+ so that we can minimize the amount of platform specific code. */
-+
-+/* Define this if the system uses RELOCA. */
-+#define ELF_USES_RELOCA
-+
-+/* Get a pointer to the argv array. On many platforms this can be
-+ just the address if the first argument, on other platforms we need
-+ to do something a little more subtle here. */
-+#define GET_ARGV(ARGVP, ARGS) ((ARGVP) = ((unsigned int *) &(ARGS)))
-+
-+/* Initialization sequence for a GOT. */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+{ \
-+ GOT_BASE[2] = (int) _dl_linux_resolve; \
-+ GOT_BASE[1] = (int) (MODULE); \
-+}
-+
-+/* Here is a macro to perform a relocation. This is only used when
-+ bootstrapping the dynamic loader. RELP is the relocation that we
-+ are performing, REL is the pointer to the address we are
-+ relocating. SYMBOL is the symbol involved in the relocation, and
-+ LOAD is the load address. */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ switch (ELF32_R_TYPE ((RELP)->r_info)) \
-+ { \
-+ case R_68K_8: \
-+ *(char *) (REL) = (SYMBOL) + (RELP)->r_addend; \
-+ break; \
-+ case R_68K_16: \
-+ *(short *) (REL) = (SYMBOL) + (RELP)->r_addend; \
-+ break; \
-+ case R_68K_32: \
-+ *(REL) = (SYMBOL) + (RELP)->r_addend; \
-+ break; \
-+ case R_68K_PC8: \
-+ *(char *) (REL) = ((SYMBOL) + (RELP)->r_addend \
-+ - (unsigned int) (REL)); \
-+ break; \
-+ case R_68K_PC16: \
-+ *(short *) (REL) = ((SYMBOL) + (RELP)->r_addend \
-+ - (unsigned int) (REL)); \
-+ break; \
-+ case R_68K_PC32: \
-+ *(REL) = ((SYMBOL) + (RELP)->r_addend \
-+ - (unsigned int) (REL)); \
-+ break; \
-+ case R_68K_GLOB_DAT: \
-+ case R_68K_JMP_SLOT: \
-+ *(REL) = (SYMBOL); \
-+ break; \
-+ case R_68K_RELATIVE: /* Compatibility kludge */ \
-+ *(REL) = ((unsigned int) (LOAD) + ((RELP)->r_addend ? : *(REL))); \
-+ break; \
-+ default: \
-+ _dl_exit (1); \
-+ }
-+
-+
-+/* Transfer control to the user's application, once the dynamic loader
-+ is done. */
-+
-+#define START() \
-+ __asm__ volatile ("unlk %%a6\n\t" \
-+ "jmp %0@" \
-+ : : "a" (_dl_elf_main));
-+
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+
-+#define MAGIC1 EM_68K
-+#undef MAGIC2
-+/* Used for error messages */
-+#define ELF_TARGET "m68k"
-+
-+struct elf_resolve;
-+extern unsigned int _dl_linux_resolver (int, int, struct elf_resolve *, int);
-+
-+/* Define this because we do not want to call .udiv in the library.
-+ Not needed for m68k. */
-+#define do_rem(result, n, base) ((result) = (n) % (base))
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/m68k/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/m68k/resolve.S
---- uClibc/ldso-0.9.24/ldso/m68k/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/m68k/resolve.S 2001-04-27 12:23:26.000000000 -0500
-@@ -0,0 +1,21 @@
-+/*
-+ * These are various helper routines that are needed to run an ELF image.
-+ */
-+
-+.text
-+.even
-+
-+.globl _dl_linux_resolve
-+ .type _dl_linux_resolve,@function
-+_dl_linux_resolve:
-+ moveml %a0/%a1,%sp@-
-+#ifdef __PIC__
-+ bsrl _dl_linux_resolver@PLTPC
-+#else
-+ jbsr _dl_linux_resolver
-+#endif
-+ moveml %sp@+,%a0/%a1
-+ addql #8,%sp
-+ jmp @(%d0)
-+.LFE2:
-+ .size _dl_linux_resolve,.LFE2-_dl_linux_resolve
-diff -urN uClibc/ldso-0.9.24/ldso/mips/README uClibc.ldso.24/ldso-0.9.24/ldso/mips/README
---- uClibc/ldso-0.9.24/ldso/mips/README 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/mips/README 2002-07-25 16:15:59.000000000 -0500
-@@ -0,0 +1,52 @@
-+Almost all of the code present in these source files was taken
-+from GLIBC. In the descriptions below, all files mentioned are
-+with respect to the top level GLIBC source directory accept for
-+code taken from the Linux kernel.
-+
-+boot1_arch.h
-+------------
-+Contains code to fix up the stack pointer so that the dynamic
-+linker can find argc, argv and Auxillary Vector Table (AVT).
-+The code is taken from the function 'RTLD_START' in the file
-+'sysdeps/mips/dl-machine.h'.
-+
-+elfinterp.c
-+-----------
-+Contains the runtime resolver code taken from the function
-+'__dl_runtime_resolve' in 'sysdeps/mips/dl-machine.h'. Also
-+contains the function to perform relocations for objects
-+other than the linker itself. The code was taken from the
-+function 'elf_machine_rel' in 'sysdeps/mips/dl-machine.h'.
-+
-+ld_syscalls.h
-+-------------
-+Used to contain all the macro functions for the system calls
-+as well as the list of system calls supported. We now include
-+<sys/syscall.h> but with the __set_errno macro defined empty
-+so we can use the same file for the linker as well as userspace.
-+Original code was taken from the Linux kernel source 2.4.17 and
-+can be found in the file 'include/asm-mips/unistd.h'.
-+
-+ld_sysdep.h
-+-----------
-+Contains bootstrap code for the dynamic linker, magic numbers
-+for detecting MIPS target types and some macros. The macro
-+function 'PERFORM_BOOTSTRAP_GOT' is used to relocate the dynamic
-+linker's GOT so that function calls can be made. The code is
-+taken from the function 'ELF_MACHINE_BEFORE_RTLD_RELOC' in the
-+file 'sysdeps/mips/dl-machine.h'. The other macro function
-+'PERFORM_BOOTSTRAP_RELOC' is used to do the relocations for
-+the dynamic loader. The code is taken from the function
-+'elf_machine_rel' in the file 'sysdeps/mips/dl-machine.h'. The
-+final macro function is 'INIT_GOT' which initializes the GOT
-+for the application being dynamically linked and loaded. The
-+code is taken from the functions 'elf_machine_runtime_setup'
-+and 'elf_machine_got_rel' in 'sysdeps/mips/dl-machine.h'.
-+
-+resolve.S
-+---------
-+Contains the low-level assembly code for the dynamic runtime
-+resolver. The code is taken from the assembly code function
-+'_dl_runtime_resolve' in the file 'sysdeps/mips/dl-machine.h'.
-+The code looks a bit different since we only need to pass the
-+symbol index and the old GP register.
-diff -urN uClibc/ldso-0.9.24/ldso/mips/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/mips/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/mips/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/mips/boot1_arch.h 2003-06-12 16:39:10.000000000 -0500
-@@ -0,0 +1,38 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture.
-+ */
-+
-+asm("" \
-+" .text\n" \
-+" .globl _dl_boot\n" \
-+"_dl_boot:\n" \
-+" .set noreorder\n" \
-+" bltzal $0, 0f\n" \
-+" nop\n" \
-+"0: .cpload $31\n" \
-+" .set reorder\n" \
-+" la $4, _DYNAMIC\n" \
-+" sw $4, -0x7ff0($28)\n" \
-+" move $4, $29\n" \
-+" la $8, coff\n" \
-+" .set noreorder\n" \
-+" bltzal $0, coff\n" \
-+" nop\n" \
-+"coff: subu $8, $31, $8\n" \
-+" .set reorder\n" \
-+" la $25, _dl_boot2\n" \
-+" addu $25, $8\n" \
-+" jalr $25\n" \
-+" lw $4, 0($29)\n" \
-+" la $5, 4($29)\n" \
-+" sll $6, $4, 2\n" \
-+" addu $6, $6, $5\n" \
-+" addu $6, $6, 4\n" \
-+" la $7, _dl_elf_main\n" \
-+" lw $25, 0($7)\n" \
-+" jr $25\n" \
-+);
-+
-+#define _dl_boot _dl_boot2
-+#define LD_BOOT(X) static void __attribute__ ((unused)) _dl_boot (X)
-diff -urN uClibc/ldso-0.9.24/ldso/mips/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/mips/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/mips/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/mips/elfinterp.c 2003-08-22 02:04:16.000000000 -0500
-@@ -0,0 +1,301 @@
-+/* vi: set sw=4 ts=4: */
-+/* mips/mipsel ELF shared library loader suppport
-+ *
-+ Copyright (C) 2002, Steven J. Hill (sjhill@realitydiluted.com)
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes_tab[] =
-+{
-+ [0] "R_MIPS_NONE", "R_MIPS_16", "R_MIPS_32",
-+ [3] "R_MIPS_REL32", "R_MIPS_26", "R_MIPS_HI16",
-+ [6] "R_MIPS_LO16", "R_MIPS_GPREL16", "R_MIPS_LITERAL",
-+ [9] "R_MIPS_GOT16", "R_MIPS_PC16", "R_MIPS_CALL16",
-+ [12] "R_MIPS_GPREL32",
-+ [16] "R_MIPS_SHIFT5", "R_MIPS_SHIFT6", "R_MIPS_64",
-+ [19] "R_MIPS_GOT_DISP", "R_MIPS_GOT_PAGE", "R_MIPS_GOT_OFST",
-+ [22] "R_MIPS_GOT_HI16", "R_MIPS_GOT_LO16", "R_MIPS_SUB",
-+ [25] "R_MIPS_INSERT_A", "R_MIPS_INSERT_B", "R_MIPS_DELETE",
-+ [28] "R_MIPS_HIGHER", "R_MIPS_HIGHEST", "R_MIPS_CALL_HI16",
-+ [31] "R_MIPS_CALL_LO16", "R_MIPS_SCN_DISP", "R_MIPS_REL16",
-+ [34] "R_MIPS_ADD_IMMEDIATE", "R_MIPS_PJUMP", "R_MIPS_RELGOT",
-+ [37] "R_MIPS_JALR",
-+};
-+
-+static const char *
-+_dl_reltypes(int type)
-+{
-+ static char buf[22];
-+ const char *str;
-+
-+ if (type >= (int)(sizeof (_dl_reltypes_tab)/sizeof(_dl_reltypes_tab[0])) ||
-+ NULL == (str = _dl_reltypes_tab[type]))
-+ {
-+ str =_dl_simple_ltoa( buf, (unsigned long)(type));
-+ }
-+ return str;
-+}
-+
-+static
-+void debug_sym(Elf32_Sym *symtab,char *strtab,int symtab_index)
-+{
-+ if(_dl_debug_symbols)
-+ {
-+ if(symtab_index){
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\tvalue=%x\tsize=%x\tinfo=%x\tother=%x\tshndx=%x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_value,
-+ symtab[symtab_index].st_size,
-+ symtab[symtab_index].st_info,
-+ symtab[symtab_index].st_other,
-+ symtab[symtab_index].st_shndx);
-+ }
-+ }
-+}
-+
-+static void debug_reloc(Elf32_Sym *symtab,char *strtab, ELF_RELOC *rpnt)
-+{
-+ if(_dl_debug_reloc)
-+ {
-+ int symtab_index;
-+ const char *sym;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ sym = symtab_index ? strtab + symtab[symtab_index].st_name : "sym=0x0";
-+
-+ if(_dl_debug_symbols)
-+ _dl_dprintf(_dl_debug_file, "\n\t");
-+ else
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\t", sym);
-+#ifdef ELF_USES_RELOCA
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\taddend=%x",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ rpnt->r_addend);
-+#else
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\n",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset);
-+#endif
-+ }
-+}
-+#endif
-+
-+extern int _dl_linux_resolve(void);
-+
-+#define OFFSET_GP_GOT 0x7ff0
-+
-+unsigned long _dl_linux_resolver(unsigned long sym_index,
-+ unsigned long old_gpreg)
-+{
-+ unsigned long *got = (unsigned long *) (old_gpreg - OFFSET_GP_GOT);
-+ struct elf_resolve *tpnt = (struct elf_resolve *) got[1];
-+ Elf32_Sym *sym;
-+ char *strtab;
-+ unsigned long local_gotno;
-+ unsigned long gotsym;
-+ unsigned long new_addr;
-+ unsigned long instr_addr;
-+ char **got_addr;
-+ char *symname;
-+
-+ gotsym = tpnt->mips_gotsym;
-+ local_gotno = tpnt->mips_local_gotno;
-+
-+ sym = ((Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr)) + sym_index;
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ symname = strtab + sym->st_name;
-+
-+ new_addr = (unsigned long) _dl_find_hash(strtab + sym->st_name,
-+ tpnt->symbol_scope, tpnt, resolver);
-+
-+ /* Address of jump instruction to fix up */
-+ instr_addr = (unsigned long) (got + local_gotno + sym_index - gotsym);
-+ got_addr = (char **) instr_addr;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if (_dl_debug_bindings)
-+ {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname);
-+ if(_dl_debug_detail) _dl_dprintf(_dl_debug_file,
-+ "\n\tpatched %x ==> %x @ %x\n", *got_addr, new_addr, got_addr);
-+ }
-+ if (!_dl_debug_nofixups) {
-+ *got_addr = (char*)new_addr;
-+ }
-+#else
-+ *got_addr = (char*)new_addr;
-+#endif
-+
-+ return new_addr;
-+}
-+
-+void _dl_parse_lazy_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ /* Nothing to do */
-+ return;
-+}
-+
-+int _dl_parse_copy_information(struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ /* Nothing to do */
-+ return 0;
-+}
-+
-+
-+int _dl_parse_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ Elf32_Sym *symtab;
-+ Elf32_Rel *rpnt;
-+ char *strtab;
-+ unsigned long *got;
-+ unsigned long *reloc_addr=NULL, old_val=0;
-+ unsigned long symbol_addr;
-+ int i, reloc_type, symtab_index;
-+
-+ /* Now parse the relocation information */
-+ rel_size = rel_size / sizeof(Elf32_Rel);
-+ rpnt = (Elf32_Rel *) (rel_addr + tpnt->loadaddr);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ got = (unsigned long *) (tpnt->dynamic_info[DT_PLTGOT] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++) {
-+ reloc_addr = (unsigned long *) (tpnt->loadaddr +
-+ (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+
-+ if (!symtab_index && tpnt->libtype == program_interpreter)
-+ continue;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab,strtab,symtab_index);
-+ debug_reloc(symtab,strtab,rpnt);
-+ old_val = *reloc_addr;
-+#endif
-+
-+ switch (reloc_type) {
-+ case R_MIPS_REL32:
-+ if (symtab_index) {
-+ if (symtab_index < tpnt->mips_gotsym)
-+ *reloc_addr +=
-+ symtab[symtab_index].st_value +
-+ (unsigned long) tpnt->loadaddr;
-+ else {
-+ *reloc_addr += got[symtab_index + tpnt->mips_local_gotno -
-+ tpnt->mips_gotsym];
-+ }
-+ }
-+ else {
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ }
-+ break;
-+ case R_MIPS_NONE:
-+ break;
-+ default:
-+ {
-+ int reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ _dl_dprintf(2, "\n%s: ",_dl_progname);
-+
-+ if (symtab_index)
-+ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "can't handle reloc type %s\n ", _dl_reltypes(reloc_type));
-+#else
-+ _dl_dprintf(2, "can't handle reloc type %x\n", reloc_type);
-+#endif
-+ _dl_exit(1);
-+ }
-+ };
-+
-+ };
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x\n", old_val, *reloc_addr, reloc_addr);
-+#endif
-+
-+ return 0;
-+}
-+
-+void _dl_perform_mips_global_got_relocations(struct elf_resolve *tpnt)
-+{
-+ Elf32_Sym *sym;
-+ char *strtab;
-+ unsigned long i;
-+ unsigned long *got_entry;
-+
-+ for (; tpnt ; tpnt = tpnt->next) {
-+
-+ /* We don't touch the dynamic linker */
-+ if (tpnt->libtype == program_interpreter)
-+ continue;
-+
-+ /* Setup the loop variables */
-+ got_entry = (unsigned long *) (tpnt->loadaddr +
-+ tpnt->dynamic_info[DT_PLTGOT]) + tpnt->mips_local_gotno;
-+ sym = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] +
-+ (unsigned long) tpnt->loadaddr) + tpnt->mips_gotsym;
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] +
-+ (unsigned long) tpnt->loadaddr);
-+ i = tpnt->mips_symtabno - tpnt->mips_gotsym;
-+
-+ /* Relocate the global GOT entries for the object */
-+ while(i--) {
-+ if (sym->st_shndx == SHN_UNDEF) {
-+ if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC && sym->st_value)
-+ *got_entry = sym->st_value + (unsigned long) tpnt->loadaddr;
-+ else {
-+ *got_entry = (unsigned long) _dl_find_hash(strtab +
-+ sym->st_name, tpnt->symbol_scope, NULL, copyrel);
-+ }
-+ }
-+ else if (sym->st_shndx == SHN_COMMON) {
-+ *got_entry = (unsigned long) _dl_find_hash(strtab +
-+ sym->st_name, tpnt->symbol_scope, NULL, copyrel);
-+ }
-+ else if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
-+ *got_entry != sym->st_value)
-+ *got_entry += (unsigned long) tpnt->loadaddr;
-+ else if (ELF32_ST_TYPE(sym->st_info) == STT_SECTION) {
-+ if (sym->st_other == 0)
-+ *got_entry += (unsigned long) tpnt->loadaddr;
-+ }
-+ else {
-+ *got_entry = (unsigned long) _dl_find_hash(strtab +
-+ sym->st_name, tpnt->symbol_scope, NULL, copyrel);
-+ }
-+
-+ got_entry++;
-+ sym++;
-+ }
-+ }
-+}
-diff -urN uClibc/ldso-0.9.24/ldso/mips/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/mips/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/mips/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/mips/ld_syscalls.h 2002-08-09 07:20:20.000000000 -0500
-@@ -0,0 +1,7 @@
-+/* Define the __set_errno macro as nothing so that we don't bother
-+ * setting errno, which is important since we make system calls
-+ * before the errno symbol is dynamicly linked. */
-+
-+#define __set_errno(X) {(void)(X);}
-+#include "sys/syscall.h"
-+
-diff -urN uClibc/ldso-0.9.24/ldso/mips/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/mips/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/mips/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/mips/ld_sysdep.h 2002-05-28 16:33:36.000000000 -0500
-@@ -0,0 +1,136 @@
-+/* vi: set sw=4 ts=4: */
-+
-+/*
-+ * Various assmbly language/system dependent hacks that are required
-+ * so that we can minimize the amount of platform specific code.
-+ */
-+
-+/*
-+ * Define this if the system uses RELOCA.
-+ */
-+#undef ELF_USES_RELOCA
-+
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long *) ARGS)
-+
-+
-+/*
-+ * Initialization sequence for the application/library GOT.
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+do { \
-+ unsigned long i; \
-+ \
-+ /* Check if this is the dynamic linker itself */ \
-+ if (MODULE->libtype == program_interpreter) \
-+ continue; \
-+ \
-+ /* Fill in first two GOT entries according to the ABI */ \
-+ GOT_BASE[0] = (unsigned long) _dl_linux_resolve; \
-+ GOT_BASE[1] = (unsigned long) MODULE; \
-+ \
-+ /* Add load address displacement to all local GOT entries */ \
-+ i = 2; \
-+ while (i < MODULE->mips_local_gotno) \
-+ GOT_BASE[i++] += (unsigned long) MODULE->loadaddr; \
-+ \
-+} while (0)
-+
-+
-+/*
-+ * Here is a macro to perform the GOT relocation. This is only
-+ * used when bootstrapping the dynamic loader.
-+ */
-+#define PERFORM_BOOTSTRAP_GOT(got) \
-+do { \
-+ Elf32_Sym *sym; \
-+ unsigned long i; \
-+ \
-+ /* Add load address displacement to all local GOT entries */ \
-+ i = 2; \
-+ while (i < tpnt->mips_local_gotno) \
-+ got[i++] += load_addr; \
-+ \
-+ /* Handle global GOT entries */ \
-+ got += tpnt->mips_local_gotno; \
-+ sym = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + \
-+ load_addr) + tpnt->mips_gotsym; \
-+ i = tpnt->mips_symtabno - tpnt->mips_gotsym; \
-+ \
-+ while (i--) { \
-+ if (sym->st_shndx == SHN_UNDEF || \
-+ sym->st_shndx == SHN_COMMON) \
-+ *got = load_addr + sym->st_value; \
-+ else if (ELF32_ST_TYPE(sym->st_info) == STT_FUNC && \
-+ *got != sym->st_value) \
-+ *got += load_addr; \
-+ else if (ELF32_ST_TYPE(sym->st_info) == STT_SECTION) { \
-+ if (sym->st_other == 0) \
-+ *got += load_addr; \
-+ } \
-+ else \
-+ *got = load_addr + sym->st_value; \
-+ \
-+ got++; \
-+ sym++; \
-+ } \
-+} while (0)
-+
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader.
-+ */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ switch(ELF32_R_TYPE((RELP)->r_info)) { \
-+ case R_MIPS_REL32: \
-+ if (symtab_index) { \
-+ if (symtab_index < tpnt->mips_gotsym) \
-+ *REL += SYMBOL; \
-+ } \
-+ else { \
-+ *REL += LOAD; \
-+ } \
-+ break; \
-+ case R_MIPS_NONE: \
-+ break; \
-+ default: \
-+ SEND_STDERR("Aiieeee!"); \
-+ _dl_exit(1); \
-+ }
-+
-+
-+/*
-+ * Transfer control to the user's application, once the dynamic loader
-+ * is done. This routine has to exit the current function, then
-+ * call the _dl_elf_main function. For MIPS, we do it in assembly
-+ * because the stack doesn't get properly restored otherwise. Got look
-+ * at boot1_arch.h
-+ */
-+#define START()
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+#define MAGIC1 EM_MIPS
-+#define MAGIC2 EM_MIPS_RS3_LE
-+
-+
-+/* Used for error messages */
-+#define ELF_TARGET "MIPS"
-+
-+
-+unsigned long _dl_linux_resolver(unsigned long sym_index,
-+ unsigned long old_gpreg);
-+
-+
-+#define do_rem(result, n, base) result = (n % base)
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/mips/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/mips/resolve.S
---- uClibc/ldso-0.9.24/ldso/mips/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/mips/resolve.S 2003-01-30 10:40:26.000000000 -0600
-@@ -0,0 +1,45 @@
-+ /*
-+ * Linux dynamic resolving code for MIPS. Fixes up the GOT entry as
-+ * indicated in register t8 and jumps to the resolved address. Shamelessly
-+ * ripped from 'sysdeps/mips/dl-machine.h' in glibc-2.2.5.
-+ *
-+ * This file is subject to the terms and conditions of the GNU Lesser General
-+ * Public License. See the file "COPYING.LIB" in the main directory of this
-+ * archive for more details.
-+ *
-+ * Copyright (C) 1996-2001 Kazumoto Kojima <kkojima@info.kanagawa-u.ac.jp>
-+ * Copyright (C) 2002 Steven J. Hill <sjhill@realitydiluted.com>
-+ *
-+ */
-+.text
-+.align 2
-+.globl _dl_linux_resolve
-+.type _dl_linux_resolve,@function
-+.ent _dl_linux_resolve
-+_dl_linux_resolve:
-+ .frame $29, 40, $31
-+ .set noreorder
-+ move $3, $28 # Save GP
-+ addu $25, 8 # t9 ($25) now points at .cpload instruction
-+ .cpload $25 # Compute GP
-+ .set reorder
-+ subu $29, 40
-+ .cprestore 32
-+ sw $15, 36($29)
-+ sw $4, 16($29)
-+ sw $5, 20($29)
-+ sw $6, 24($29)
-+ sw $7, 28($29)
-+ move $4, $24
-+ move $5, $3
-+ jal _dl_linux_resolver
-+ lw $31, 36($29)
-+ lw $4, 16($29)
-+ lw $5, 20($29)
-+ lw $6, 24($29)
-+ lw $7, 28($29)
-+ addu $29, 40
-+ move $25, $2
-+ jr $25
-+.size _dl_linux_resolve,.-_dl_linux_resolve
-+.end _dl_linux_resolve
-diff -urN uClibc/ldso-0.9.24/ldso/powerpc/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/powerpc/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/boot1_arch.h 2003-02-15 19:22:41.000000000 -0600
-@@ -0,0 +1,20 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture. */
-+
-+/* Overrive the default _dl_boot function, and replace it with a bit of asm.
-+ * Then call the real _dl_boot function, which is now named _dl_boot2. */
-+
-+asm("" \
-+" .text\n" \
-+" .globl _dl_boot\n" \
-+"_dl_boot:\n" \
-+" mr 3,1\n" \
-+" addi 1,1,-16\n" \
-+" bl _dl_boot2\n" \
-+".previous\n" \
-+);
-+
-+#define _dl_boot _dl_boot2
-+#define LD_BOOT(X) static void * __attribute__ ((unused)) _dl_boot (X)
-+
-diff -urN uClibc/ldso-0.9.24/ldso/powerpc/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/powerpc/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/elfinterp.c 2003-12-03 17:28:33.000000000 -0600
-@@ -0,0 +1,621 @@
-+/* vi: set sw=4 ts=4: */
-+/* powerpc shared library loader suppport
-+ *
-+ * Copyright (C) 2001-2002, David A. Schleef
-+ * Copyright (C) 2003, Erik Andersen
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes_tab[] =
-+ { "R_PPC_NONE", "R_PPC_ADDR32", "R_PPC_ADDR24", "R_PPC_ADDR16",
-+ "R_PPC_ADDR16_LO", "R_PPC_ADDR16_HI", "R_PPC_ADDR16_HA",
-+ "R_PPC_ADDR14", "R_PPC_ADDR14_BRTAKEN", "R_PPC_ADDR14_BRNTAKEN",
-+ "R_PPC_REL24", "R_PPC_REL14", "R_PPC_REL14_BRTAKEN",
-+ "R_PPC_REL14_BRNTAKEN", "R_PPC_GOT16", "R_PPC_GOT16_LO",
-+ "R_PPC_GOT16_HI", "R_PPC_GOT16_HA", "R_PPC_PLTREL24",
-+ "R_PPC_COPY", "R_PPC_GLOB_DAT", "R_PPC_JMP_SLOT", "R_PPC_RELATIVE",
-+ "R_PPC_LOCAL24PC", "R_PPC_UADDR32", "R_PPC_UADDR16", "R_PPC_REL32",
-+ "R_PPC_PLT32", "R_PPC_PLTREL32", "R_PPC_PLT16_LO", "R_PPC_PLT16_HI",
-+ "R_PPC_PLT16_HA", "R_PPC_SDAREL16", "R_PPC_SECTOFF",
-+ "R_PPC_SECTOFF_LO", "R_PPC_SECTOFF_HI", "R_PPC_SECTOFF_HA",
-+};
-+
-+static const char *
-+_dl_reltypes(int type)
-+{
-+ static char buf[22];
-+ const char *str;
-+
-+ if (type >= (int)(sizeof (_dl_reltypes_tab)/sizeof(_dl_reltypes_tab[0])) ||
-+ NULL == (str = _dl_reltypes_tab[type]))
-+ {
-+ str =_dl_simple_ltoa( buf, (unsigned long)(type));
-+ }
-+ return str;
-+}
-+
-+static
-+void debug_sym(Elf32_Sym *symtab,char *strtab,int symtab_index)
-+{
-+ if(_dl_debug_symbols)
-+ {
-+ if(symtab_index){
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\tvalue=%x\tsize=%x\tinfo=%x\tother=%x\tshndx=%x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_value,
-+ symtab[symtab_index].st_size,
-+ symtab[symtab_index].st_info,
-+ symtab[symtab_index].st_other,
-+ symtab[symtab_index].st_shndx);
-+ }
-+ }
-+}
-+
-+static
-+void debug_reloc(Elf32_Sym *symtab,char *strtab, ELF_RELOC *rpnt)
-+{
-+ if(_dl_debug_reloc)
-+ {
-+ int symtab_index;
-+ const char *sym;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ sym = symtab_index ? strtab + symtab[symtab_index].st_name : "sym=0x0";
-+
-+ if(_dl_debug_symbols)
-+ _dl_dprintf(_dl_debug_file, "\n\t");
-+ else
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\t", sym);
-+#ifdef ELF_USES_RELOCA
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\taddend=%x",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ rpnt->r_addend);
-+#else
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\n",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset);
-+#endif
-+ }
-+}
-+#endif
-+
-+extern int _dl_linux_resolve(void);
-+
-+void _dl_init_got(unsigned long *plt,struct elf_resolve *tpnt)
-+{
-+ unsigned long target_addr = (unsigned long)_dl_linux_resolve;
-+ unsigned int n_plt_entries;
-+ unsigned long *tramp;
-+ unsigned long data_words;
-+ unsigned int rel_offset_words;
-+
-+ //DPRINTF("init_got plt=%x, tpnt=%x\n", (unsigned long)plt,(unsigned long)tpnt);
-+
-+ n_plt_entries = tpnt->dynamic_info[DT_PLTRELSZ] / sizeof(ELF_RELOC);
-+ //DPRINTF("n_plt_entries %d\n",n_plt_entries);
-+
-+ rel_offset_words = PLT_DATA_START_WORDS(n_plt_entries);
-+ //DPRINTF("rel_offset_words %x\n",rel_offset_words);
-+ data_words = (unsigned long)(plt + rel_offset_words);
-+ //DPRINTF("data_words %x\n",data_words);
-+
-+ tpnt->data_words = data_words;
-+
-+ plt[PLT_LONGBRANCH_ENTRY_WORDS] = OPCODE_ADDIS_HI(11, 11, data_words);
-+ plt[PLT_LONGBRANCH_ENTRY_WORDS+1] = OPCODE_LWZ(11,data_words,11);
-+
-+ plt[PLT_LONGBRANCH_ENTRY_WORDS+2] = OPCODE_MTCTR(11);
-+ plt[PLT_LONGBRANCH_ENTRY_WORDS+3] = OPCODE_BCTR();
-+
-+ /* [4] */
-+ /* [5] */
-+
-+ tramp = plt + PLT_TRAMPOLINE_ENTRY_WORDS;
-+ tramp[0] = OPCODE_ADDIS_HI(11,11,-data_words);
-+ tramp[1] = OPCODE_ADDI(11,11,-data_words);
-+ tramp[2] = OPCODE_SLWI(12,11,1);
-+ tramp[3] = OPCODE_ADD(11,12,11);
-+ tramp[4] = OPCODE_LI(12,target_addr);
-+ tramp[5] = OPCODE_ADDIS_HI(12,12,target_addr);
-+ tramp[6] = OPCODE_MTCTR(12);
-+ tramp[7] = OPCODE_LI(12,(unsigned long)tpnt);
-+ tramp[8] = OPCODE_ADDIS_HI(12,12,(unsigned long)tpnt);
-+ tramp[9] = OPCODE_BCTR();
-+
-+ /* [16] unused */
-+ /* [17] unused */
-+
-+ /* instructions were modified */
-+ PPC_DCBST(plt);
-+ PPC_DCBST(plt+4);
-+ PPC_DCBST(plt+8);
-+ PPC_DCBST(plt+12);
-+ PPC_DCBST(plt+16-1);
-+ PPC_SYNC;
-+ PPC_ICBI(plt);
-+ PPC_ICBI(plt+4); /* glibc thinks this is not needed */
-+ PPC_ICBI(plt+8); /* glibc thinks this is not needed */
-+ PPC_ICBI(plt+12); /* glibc thinks this is not needed */
-+ PPC_ICBI(plt+16-1);
-+ PPC_ISYNC;
-+}
-+
-+unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
-+{
-+ int reloc_type;
-+ ELF_RELOC *this_reloc;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rel_addr;
-+ int symtab_index;
-+ char *symname;
-+ unsigned long insn_addr;
-+ unsigned long *insns;
-+ unsigned long new_addr;
-+ unsigned long delta;
-+
-+ rel_addr = (ELF_RELOC *) (tpnt->dynamic_info[DT_JMPREL] + tpnt->loadaddr);
-+
-+ this_reloc = (void *)rel_addr + reloc_entry;
-+ reloc_type = ELF32_R_TYPE(this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM(this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab,strtab,symtab_index);
-+ debug_reloc(symtab,strtab,this_reloc);
-+#endif
-+
-+ if (reloc_type != R_PPC_JMP_SLOT) {
-+ _dl_dprintf(2, "%s: Incorrect relocation type in jump relocation\n", _dl_progname);
-+ _dl_exit(1);
-+ };
-+
-+ /* Address of dump instruction to fix up */
-+ insn_addr = (unsigned long) tpnt->loadaddr +
-+ (unsigned long) this_reloc->r_offset;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\n\tResolving symbol %s %x --> ", symname, insn_addr);
-+#endif
-+
-+ /* Get the address of the GOT entry */
-+ new_addr = (unsigned long) _dl_find_hash(
-+ strtab + symtab[symtab_index].st_name,
-+ tpnt->symbol_scope, tpnt, resolver);
-+ if (!new_addr) {
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, symname);
-+ _dl_exit(1);
-+ };
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "%x\n", new_addr);
-+#endif
-+
-+ insns = (unsigned long *)insn_addr;
-+ delta = new_addr - insn_addr;
-+
-+ if(delta<<6>>6 == delta){
-+ insns[0] = OPCODE_B(delta);
-+ }else if (new_addr <= 0x01fffffc || new_addr >= 0xfe000000){
-+ insns[0] = OPCODE_BA (new_addr);
-+ }else{
-+ /* Warning: we don't handle double-sized PLT entries */
-+ unsigned long plt_addr;
-+ unsigned long *ptr;
-+ int index;
-+
-+ plt_addr = (unsigned long)tpnt->dynamic_info[DT_PLTGOT] +
-+ (unsigned long)tpnt->loadaddr;
-+
-+ delta = PLT_LONGBRANCH_ENTRY_WORDS*4 - (insn_addr-plt_addr+4);
-+
-+ index = (insn_addr - plt_addr - PLT_INITIAL_ENTRY_WORDS*4)/8;
-+
-+ ptr = (unsigned long *)tpnt->data_words;
-+ //DPRINTF("plt_addr=%x delta=%x index=%x ptr=%x\n", plt_addr, delta, index, ptr);
-+ insns += 1;
-+
-+ ptr[index] = new_addr;
-+ PPC_SYNC;
-+ /* icache sync is not necessary, since this will be a data load */
-+ //PPC_DCBST(ptr+index);
-+ //PPC_SYNC;
-+ //PPC_ICBI(ptr+index);
-+ //PPC_ISYNC;
-+
-+ insns[0] = OPCODE_B(delta);
-+
-+ }
-+
-+ /* instructions were modified */
-+ PPC_DCBST(insns);
-+ PPC_SYNC;
-+ PPC_ICBI(insns);
-+ PPC_ISYNC;
-+
-+ return new_addr;
-+}
-+
-+static int
-+_dl_parse(struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ unsigned long rel_addr, unsigned long rel_size,
-+ int (*reloc_fnc) (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab))
-+{
-+ unsigned int i;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rpnt;
-+ int symtab_index;
-+
-+ /* Now parse the relocation information */
-+ rpnt = (ELF_RELOC *)(intptr_t) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof(ELF_RELOC);
-+
-+ symtab = (Elf32_Sym *)(intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++) {
-+ int res;
-+
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+
-+ /* When the dynamic linker bootstrapped itself, it resolved some symbols.
-+ Make sure we do not do them again */
-+ if (!symtab_index && tpnt->libtype == program_interpreter)
-+ continue;
-+ if (symtab_index && tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab,strtab,symtab_index);
-+ debug_reloc(symtab,strtab,rpnt);
-+#endif
-+
-+ res = reloc_fnc (tpnt, scope, rpnt, symtab, strtab);
-+
-+ if (res==0) continue;
-+
-+ _dl_dprintf(2, "\n%s: ",_dl_progname);
-+
-+ if (symtab_index)
-+ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
-+
-+ if (res <0)
-+ {
-+ int reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "can't handle reloc type %s\n ", _dl_reltypes(reloc_type));
-+#else
-+ _dl_dprintf(2, "can't handle reloc type %x\n", reloc_type);
-+#endif
-+ _dl_exit(-res);
-+ }
-+ else if (res >0)
-+ {
-+ _dl_dprintf(2, "can't resolve symbol\n");
-+ return res;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int
-+_dl_do_lazy_reloc (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ unsigned long reloc_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+ (void)scope;
-+ (void)symtab;
-+ (void)strtab;
-+
-+ reloc_addr = (unsigned long)tpnt->loadaddr + (unsigned long) rpnt->r_offset;
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = reloc_addr;
-+#endif
-+
-+ switch (reloc_type) {
-+ case R_PPC_NONE:
-+ return 0;
-+ break;
-+ case R_PPC_JMP_SLOT:
-+ {
-+ int index;
-+ unsigned long delta;
-+ unsigned long *plt;
-+ unsigned long *insns;
-+
-+ plt = (unsigned long *)(tpnt->dynamic_info[DT_PLTGOT] + tpnt->loadaddr);
-+
-+ delta = (unsigned long)(plt+PLT_TRAMPOLINE_ENTRY_WORDS+2) - (reloc_addr+4);
-+
-+ index = (reloc_addr - (unsigned long)(plt+PLT_INITIAL_ENTRY_WORDS))
-+ /sizeof(unsigned long);
-+ index /= 2;
-+ //DPRINTF(" index %x delta %x\n",index,delta);
-+ insns = (unsigned long *)reloc_addr;
-+ insns[0] = OPCODE_LI(11,index*4);
-+ insns[1] = OPCODE_B(delta);
-+ break;
-+ }
-+ default:
-+#if 0
-+ _dl_dprintf(2, "%s: (LAZY) can't handle reloc type ",
-+ _dl_progname);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "%s ", _dl_reltypes[reloc_type]);
-+#endif
-+ if (symtab_index)
-+ _dl_dprintf(2, "'%s'\n", strtab + symtab[symtab_index].st_name);
-+#endif
-+ //_dl_exit(1);
-+ return -1;
-+ };
-+
-+ /* instructions were modified */
-+ PPC_DCBST(reloc_addr);
-+ PPC_DCBST(reloc_addr+4);
-+ PPC_SYNC;
-+ PPC_ICBI(reloc_addr);
-+ PPC_ICBI(reloc_addr+4);
-+ PPC_ISYNC;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x", old_val, reloc_addr);
-+#endif
-+ return 0;
-+
-+}
-+
-+static int
-+_dl_do_reloc (struct elf_resolve *tpnt,struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ char *symname;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope,
-+ (reloc_type == R_PPC_JMP_SLOT ? tpnt : NULL), symbolrel);
-+
-+ /*
-+ * We want to allow undefined references to weak symbols - this might
-+ * have been intentional. We should not be linking local symbols
-+ * here, so all bases should be covered.
-+ */
-+
-+ if (!symbol_addr && ELF32_ST_BIND(symtab[symtab_index].st_info) == STB_GLOBAL) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "\tglobal symbol '%s' already defined in '%s'\n",
-+ symname, tpnt->libname);
-+#endif
-+ return 0;
-+ }
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_PPC_NONE:
-+ return 0;
-+ break;
-+ case R_PPC_REL24:
-+#if 0
-+ {
-+ unsigned long delta = symbol_addr - (unsigned long)reloc_addr;
-+ if(delta<<6>>6 != delta){
-+ _dl_dprintf(2,"R_PPC_REL24: Reloc out of range\n");
-+ _dl_exit(1);
-+ }
-+ *reloc_addr &= 0xfc000003;
-+ *reloc_addr |= delta&0x03fffffc;
-+ }
-+ break;
-+#else
-+ _dl_dprintf(2, "%s: symbol '%s' is type R_PPC_REL24\n\tCompile shared libraries with -fPIC!\n",
-+ _dl_progname, symname);
-+ _dl_exit(1);
-+#endif
-+ case R_PPC_RELATIVE:
-+ *reloc_addr = (unsigned long)tpnt->loadaddr + (unsigned long)rpnt->r_addend;
-+ break;
-+ case R_PPC_ADDR32:
-+ *reloc_addr += symbol_addr;
-+ break;
-+ case R_PPC_ADDR16_HA:
-+ /* XXX is this correct? */
-+ *(short *)reloc_addr += (symbol_addr+0x8000)>>16;
-+ break;
-+ case R_PPC_ADDR16_HI:
-+ *(short *)reloc_addr += symbol_addr>>16;
-+ break;
-+ case R_PPC_ADDR16_LO:
-+ *(short *)reloc_addr += symbol_addr;
-+ break;
-+ case R_PPC_JMP_SLOT:
-+ {
-+ unsigned long targ_addr = (unsigned long)*reloc_addr;
-+ unsigned long delta = targ_addr - (unsigned long)reloc_addr;
-+ if(delta<<6>>6 == delta){
-+ *reloc_addr = OPCODE_B(delta);
-+ }else if (targ_addr <= 0x01fffffc || targ_addr >= 0xfe000000){
-+ *reloc_addr = OPCODE_BA (targ_addr);
-+ }else{
-+ {
-+ int index;
-+ unsigned long delta2;
-+ unsigned long *plt, *ptr;
-+ plt = (unsigned long *)(tpnt->dynamic_info[DT_PLTGOT] + tpnt->loadaddr);
-+
-+ delta2 = (unsigned long)(plt+PLT_LONGBRANCH_ENTRY_WORDS)
-+ - (unsigned long)(reloc_addr+1);
-+
-+ index = ((unsigned long)reloc_addr -
-+ (unsigned long)(plt+PLT_INITIAL_ENTRY_WORDS))
-+ /sizeof(unsigned long);
-+ index /= 2;
-+ //DPRINTF(" index %x delta %x\n",index,delta2);
-+ ptr = (unsigned long *)tpnt->data_words;
-+ ptr[index] = targ_addr;
-+ reloc_addr[0] = OPCODE_LI(11,index*4);
-+ reloc_addr[1] = OPCODE_B(delta2);
-+
-+ /* instructions were modified */
-+ PPC_DCBST(reloc_addr+1);
-+ PPC_SYNC;
-+ PPC_ICBI(reloc_addr+1);
-+ }
-+ }
-+ break;
-+ }
-+ case R_PPC_GLOB_DAT:
-+ *reloc_addr += symbol_addr;
-+ break;
-+ case R_PPC_COPY:
-+ // handled later
-+ return 0;
-+ break;
-+ default:
-+#if 0
-+ _dl_dprintf(2, "%s: can't handle reloc type ", _dl_progname);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "%s ", _dl_reltypes[reloc_type]);
-+#endif
-+ if (symtab_index)
-+ _dl_dprintf(2, "'%s'\n", strtab + symtab[symtab_index].st_name);
-+#endif
-+ //_dl_exit(1);
-+ return -1;
-+ };
-+
-+ /* instructions were modified */
-+ PPC_DCBST(reloc_addr);
-+ PPC_SYNC;
-+ PPC_ICBI(reloc_addr);
-+ PPC_ISYNC;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+
-+ return 0;
-+}
-+
-+
-+/* This is done as a separate step, because there are cases where
-+ information is first copied and later initialized. This results in
-+ the wrong information being copied. Someone at Sun was complaining about
-+ a bug in the handling of _COPY by SVr4, and this may in fact be what he
-+ was talking about. Sigh. */
-+static int
-+_dl_do_copy (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+ int goof = 0;
-+ char *symname;
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ if (reloc_type != R_PPC_COPY)
-+ return 0;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope, NULL, copyrel);
-+ if (!symbol_addr) goof++;
-+ }
-+ if (!goof) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_move)
-+ _dl_dprintf(_dl_debug_file,"\n%s move %x bytes from %x to %x",
-+ symname, symtab[symtab_index].st_size,
-+ symbol_addr, symtab[symtab_index].st_value);
-+#endif
-+ _dl_memcpy((char *) reloc_addr,
-+ (char *) symbol_addr, symtab[symtab_index].st_size);
-+ }
-+
-+ return goof;
-+}
-+
-+void _dl_parse_lazy_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ (void)_dl_parse(tpnt, NULL, rel_addr, rel_size, _dl_do_lazy_reloc);
-+}
-+
-+int _dl_parse_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ return _dl_parse(tpnt, tpnt->symbol_scope, rel_addr, rel_size, _dl_do_reloc);
-+}
-+
-+int _dl_parse_copy_information(struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ return _dl_parse(xpnt->dyn, xpnt->next, rel_addr, rel_size, _dl_do_copy);
-+}
-+
-+
-diff -urN uClibc/ldso-0.9.24/ldso/powerpc/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/powerpc/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/ld_syscalls.h 2003-06-14 20:08:43.000000000 -0500
-@@ -0,0 +1,244 @@
-+/*
-+ * This file contains the system call macros and syscall
-+ * numbers used by the shared library loader.
-+ */
-+
-+#define __NR_exit 1
-+#define __NR_read 3
-+#define __NR_write 4
-+#define __NR_open 5
-+#define __NR_close 6
-+#define __NR_getpid 20
-+#define __NR_getuid 24
-+#define __NR_geteuid 49
-+#define __NR_getgid 47
-+#define __NR_getegid 50
-+#define __NR_readlink 85
-+#define __NR_mmap 90
-+#define __NR_munmap 91
-+#define __NR_stat 106
-+#define __NR_mprotect 125
-+
-+/* Here are the macros which define how this platform makes
-+ * system calls. This particular variant does _not_ set
-+ * errno (note how it is disabled in __syscall_return) since
-+ * these will get called before the errno symbol is dynamicly
-+ * linked. */
-+
-+#undef __syscall_return
-+#define __syscall_return(type) \
-+ return (__sc_err & 0x10000000 ? /*errno = __sc_ret,*/ __sc_ret = -1 : 0), \
-+ (type) __sc_ret
-+
-+#undef __syscall_clobbers
-+#define __syscall_clobbers \
-+ "r9", "r10", "r11", "r12"
-+ //"r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12"
-+
-+#undef _syscall0
-+#define _syscall0(type,name) \
-+type name(void) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0) \
-+ : "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+#undef _syscall1
-+#define _syscall1(type,name,type1,arg1) \
-+type name(type1 arg1) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ \
-+ __sc_3 = (unsigned long) (arg1); \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0) \
-+ : "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+#undef _syscall2
-+#define _syscall2(type,name,type1,arg1,type2,arg2) \
-+type name(type1 arg1, type2 arg2) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ register unsigned long __sc_4 __asm__ ("r4"); \
-+ \
-+ __sc_3 = (unsigned long) (arg1); \
-+ __sc_4 = (unsigned long) (arg2); \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0), \
-+ "r" (__sc_4) \
-+ : "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+#undef _syscall3
-+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
-+type name(type1 arg1, type2 arg2, type3 arg3) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ register unsigned long __sc_4 __asm__ ("r4"); \
-+ register unsigned long __sc_5 __asm__ ("r5"); \
-+ \
-+ __sc_3 = (unsigned long) (arg1); \
-+ __sc_4 = (unsigned long) (arg2); \
-+ __sc_5 = (unsigned long) (arg3); \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0), \
-+ "r" (__sc_4), \
-+ "r" (__sc_5) \
-+ : "r6", "r7", "r8", "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+#undef _syscall4
-+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ register unsigned long __sc_4 __asm__ ("r4"); \
-+ register unsigned long __sc_5 __asm__ ("r5"); \
-+ register unsigned long __sc_6 __asm__ ("r6"); \
-+ \
-+ __sc_3 = (unsigned long) (arg1); \
-+ __sc_4 = (unsigned long) (arg2); \
-+ __sc_5 = (unsigned long) (arg3); \
-+ __sc_6 = (unsigned long) (arg4); \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0), \
-+ "r" (__sc_4), \
-+ "r" (__sc_5), \
-+ "r" (__sc_6) \
-+ : "r7", "r8", "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+#undef _syscall5
-+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
-+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ register unsigned long __sc_4 __asm__ ("r4"); \
-+ register unsigned long __sc_5 __asm__ ("r5"); \
-+ register unsigned long __sc_6 __asm__ ("r6"); \
-+ register unsigned long __sc_7 __asm__ ("r7"); \
-+ \
-+ __sc_3 = (unsigned long) (arg1); \
-+ __sc_4 = (unsigned long) (arg2); \
-+ __sc_5 = (unsigned long) (arg3); \
-+ __sc_6 = (unsigned long) (arg4); \
-+ __sc_7 = (unsigned long) (arg5); \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0), \
-+ "r" (__sc_4), \
-+ "r" (__sc_5), \
-+ "r" (__sc_6), \
-+ "r" (__sc_7) \
-+ : "r8", "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+
-+#undef _syscall6
-+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
-+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) \
-+{ \
-+ unsigned long __sc_ret, __sc_err; \
-+ { \
-+ register unsigned long __sc_0 __asm__ ("r0"); \
-+ register unsigned long __sc_3 __asm__ ("r3"); \
-+ register unsigned long __sc_4 __asm__ ("r4"); \
-+ register unsigned long __sc_5 __asm__ ("r5"); \
-+ register unsigned long __sc_6 __asm__ ("r6"); \
-+ register unsigned long __sc_7 __asm__ ("r7"); \
-+ register unsigned long __sc_8 __asm__ ("r8"); \
-+ \
-+ __sc_3 = (unsigned long) (arg1); \
-+ __sc_4 = (unsigned long) (arg2); \
-+ __sc_5 = (unsigned long) (arg3); \
-+ __sc_6 = (unsigned long) (arg4); \
-+ __sc_7 = (unsigned long) (arg5); \
-+ __sc_8 = (unsigned long) (arg6); \
-+ __sc_0 = __NR_##name; \
-+ __asm__ __volatile__ \
-+ ("sc \n\t" \
-+ "mfcr %1 " \
-+ : "=&r" (__sc_3), "=&r" (__sc_0) \
-+ : "0" (__sc_3), "1" (__sc_0), \
-+ "r" (__sc_4), \
-+ "r" (__sc_5), \
-+ "r" (__sc_6), \
-+ "r" (__sc_7), \
-+ "r" (__sc_8) \
-+ : "r9", "r10", "r11", "r12" ); \
-+ __sc_ret = __sc_3; \
-+ __sc_err = __sc_0; \
-+ } \
-+ __syscall_return (type); \
-+}
-+
-+
-diff -urN uClibc/ldso-0.9.24/ldso/powerpc/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/powerpc/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/ld_sysdep.h 2003-12-03 17:38:43.000000000 -0600
-@@ -0,0 +1,136 @@
-+/*
-+ * Various assmbly language/system dependent hacks that are required
-+ * so that we can minimize the amount of platform specific code.
-+ */
-+
-+/*
-+ * Define this if the system uses RELOCA.
-+ */
-+#define ELF_USES_RELOCA
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long*) ARGS)+1)
-+
-+/*
-+ * Initialization sequence for a GOT.
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) _dl_init_got(GOT_BASE,MODULE)
-+
-+/* Stuff for the PLT. */
-+#define PLT_INITIAL_ENTRY_WORDS 18
-+#define PLT_LONGBRANCH_ENTRY_WORDS 0
-+#define PLT_TRAMPOLINE_ENTRY_WORDS 6
-+#define PLT_DOUBLE_SIZE (1<<13)
-+#define PLT_ENTRY_START_WORDS(entry_number) \
-+ (PLT_INITIAL_ENTRY_WORDS + (entry_number)*2 \
-+ + ((entry_number) > PLT_DOUBLE_SIZE \
-+ ? ((entry_number) - PLT_DOUBLE_SIZE)*2 \
-+ : 0))
-+#define PLT_DATA_START_WORDS(num_entries) PLT_ENTRY_START_WORDS(num_entries)
-+
-+/* Macros to build PowerPC opcode words. */
-+#define OPCODE_ADDI(rd,ra,simm) \
-+ (0x38000000 | (rd) << 21 | (ra) << 16 | ((simm) & 0xffff))
-+#define OPCODE_ADDIS(rd,ra,simm) \
-+ (0x3c000000 | (rd) << 21 | (ra) << 16 | ((simm) & 0xffff))
-+#define OPCODE_ADD(rd,ra,rb) \
-+ (0x7c000214 | (rd) << 21 | (ra) << 16 | (rb) << 11)
-+#define OPCODE_B(target) (0x48000000 | ((target) & 0x03fffffc))
-+#define OPCODE_BA(target) (0x48000002 | ((target) & 0x03fffffc))
-+#define OPCODE_BCTR() 0x4e800420
-+#define OPCODE_LWZ(rd,d,ra) \
-+ (0x80000000 | (rd) << 21 | (ra) << 16 | ((d) & 0xffff))
-+#define OPCODE_LWZU(rd,d,ra) \
-+ (0x84000000 | (rd) << 21 | (ra) << 16 | ((d) & 0xffff))
-+#define OPCODE_MTCTR(rd) (0x7C0903A6 | (rd) << 21)
-+#define OPCODE_RLWINM(ra,rs,sh,mb,me) \
-+ (0x54000000 | (rs) << 21 | (ra) << 16 | (sh) << 11 | (mb) << 6 | (me) << 1)
-+
-+#define OPCODE_LI(rd,simm) OPCODE_ADDI(rd,0,simm)
-+#define OPCODE_ADDIS_HI(rd,ra,value) \
-+ OPCODE_ADDIS(rd,ra,((value) + 0x8000) >> 16)
-+#define OPCODE_LIS_HI(rd,value) OPCODE_ADDIS_HI(rd,0,value)
-+#define OPCODE_SLWI(ra,rs,sh) OPCODE_RLWINM(ra,rs,sh,0,31-sh)
-+
-+
-+#define PPC_DCBST(where) asm volatile ("dcbst 0,%0" : : "r"(where) : "memory")
-+#define PPC_SYNC asm volatile ("sync" : : : "memory")
-+#define PPC_ISYNC asm volatile ("sync; isync" : : : "memory")
-+#define PPC_ICBI(where) asm volatile ("icbi 0,%0" : : "r"(where) : "memory")
-+#define PPC_DIE asm volatile ("tweq 0,0")
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader. RELP is the relocation that we
-+ * are performing, REL is the pointer to the address we are relocating.
-+ * SYMBOL is the symbol involved in the relocation, and LOAD is the
-+ * load address.
-+ */
-+// finaladdr = LOAD ?
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ {int type=ELF32_R_TYPE((RELP)->r_info); \
-+ if(type==R_PPC_NONE){ \
-+ }else if(type==R_PPC_ADDR32){ \
-+ *REL += (SYMBOL); \
-+ }else if(type==R_PPC_RELATIVE){ \
-+ *REL = (Elf32_Word)(LOAD) + (RELP)->r_addend; \
-+ }else if(type==R_PPC_REL24){ \
-+ Elf32_Sword delta = (Elf32_Word)(SYMBOL) - (Elf32_Word)(REL); \
-+ *REL &= 0xfc000003; \
-+ *REL |= (delta & 0x03fffffc); \
-+ }else if(type==R_PPC_JMP_SLOT){ \
-+ Elf32_Sword delta = (Elf32_Word)(SYMBOL) - (Elf32_Word)(REL); \
-+ /*if (delta << 6 >> 6 != delta)_dl_exit(99);*/ \
-+ *REL = OPCODE_B(delta); \
-+ }else{ \
-+ _dl_exit(100+ELF32_R_TYPE((RELP)->r_info)); \
-+ } \
-+ if(type!=R_PPC_NONE){ \
-+ PPC_DCBST(REL); PPC_SYNC; PPC_ICBI(REL);\
-+ } \
-+ }
-+
-+/*
-+ * Transfer control to the user's application, once the dynamic loader
-+ * is done. This routine has to exit the current function, then
-+ * call the _dl_elf_main function.
-+ */
-+
-+/* hgb@ifi.uio.no:
-+ * Adding a clobber list consisting of r0 for %1. addi on PowerPC
-+ * takes a register as the second argument, but if the register is
-+ * r0, the value 0 is used instead. If r0 is used here, the stack
-+ * pointer (r1) will be zeroed, and the dynamically linked
-+ * application will seg.fault immediatly when receiving control.
-+ */
-+#define START() \
-+ __asm__ volatile ( \
-+ "addi 1,%1,0\n\t" \
-+ "mtlr %0\n\t" \
-+ "blrl\n\t" \
-+ : : "r" (_dl_elf_main), "r" (args) \
-+ : "r0")
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+
-+#define MAGIC1 EM_PPC
-+#undef MAGIC2
-+/* Used for error messages */
-+#define ELF_TARGET "powerpc"
-+
-+struct elf_resolve;
-+extern unsigned long _dl_linux_resolver(struct elf_resolve * tpnt, int reloc_entry);
-+void _dl_init_got(unsigned long *lpnt,struct elf_resolve *tpnt);
-+
-+
-+#define do_rem(result, n, base) result = (n % base)
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/powerpc/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/resolve.S
---- uClibc/ldso-0.9.24/ldso/powerpc/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/powerpc/resolve.S 2001-07-12 05:14:09.000000000 -0500
-@@ -0,0 +1,82 @@
-+/*
-+ * Stolen from glibc-2.2.2 by David Schleef <ds@schleef.org>
-+ */
-+
-+.text
-+.align 4
-+
-+.globl _dl_linux_resolver
-+
-+.globl _dl_linux_resolve
-+.type _dl_linux_resolve,@function
-+
-+_dl_linux_resolve:
-+// We need to save the registers used to pass parameters, and register 0,
-+// which is used by _mcount; the registers are saved in a stack frame.
-+ stwu 1,-64(1)
-+ stw 0,12(1)
-+ stw 3,16(1)
-+ stw 4,20(1)
-+// The code that calls this has put parameters for 'fixup' in r12 and r11.
-+ mr 3,12
-+ stw 5,24(1)
-+ mr 4,11
-+ stw 6,28(1)
-+ mflr 0
-+// We also need to save some of the condition register fields.
-+ stw 7,32(1)
-+ stw 0,48(1)
-+ stw 8,36(1)
-+ mfcr 0
-+ stw 9,40(1)
-+ stw 10,44(1)
-+ stw 0,8(1)
-+ bl _dl_linux_resolver@local
-+// 'fixup' returns the address we want to branch to.
-+ mtctr 3
-+// Put the registers back...
-+ lwz 0,48(1)
-+ lwz 10,44(1)
-+ lwz 9,40(1)
-+ mtlr 0
-+ lwz 8,36(1)
-+ lwz 0,8(1)
-+ lwz 7,32(1)
-+ lwz 6,28(1)
-+ mtcrf 0xFF,0
-+ lwz 5,24(1)
-+ lwz 4,20(1)
-+ lwz 3,16(1)
-+ lwz 0,12(1)
-+// ...unwind the stack frame, and jump to the PLT entry we updated.
-+ addi 1,1,64
-+ bctr
-+
-+.LFE2:
-+ .size _dl_linux_resolve,.LFE2-_dl_linux_resolve
-+
-+#if 0
-+
-+ pusha /* preserve all regs */
-+ lea 0x20(%esp),%eax /* eax = tpnt and reloc_entry params */
-+ pushl 4(%eax) /* push copy of reloc_entry param */
-+ pushl (%eax) /* push copy of tpnt param */
-+
-+#ifdef __PIC__
-+ call .L24
-+.L24:
-+ popl %ebx
-+ addl $_GLOBAL_OFFSET_TABLE_+[.-.L24],%ebx
-+ movl _dl_linux_resolver@GOT(%ebx),%ebx /* eax = resolved func */
-+ call *%ebx
-+#else
-+ call _dl_linux_resolver
-+#endif
-+ movl %eax,0x28(%esp) /* store func addr over original
-+ * tpnt param */
-+ addl $0x8,%esp /* remove copy parameters */
-+ popa /* restore regs */
-+ ret $4 /* jump to func removing original
-+ * reloc_entry param from stack */
-+#endif
-+
-diff -urN uClibc/ldso-0.9.24/ldso/readelflib1.c uClibc.ldso.24/ldso-0.9.24/ldso/readelflib1.c
---- uClibc/ldso-0.9.24/ldso/readelflib1.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/readelflib1.c 2003-12-05 14:24:26.000000000 -0600
-@@ -0,0 +1,971 @@
-+/* vi: set sw=4 ts=4: */
-+/* Program to load an ELF binary on a linux system, and run it
-+ * after resolving ELF shared library symbols
-+ *
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
-+ * David Engel, Hongjiu Lu and Mitch D'Souza
-+ * Copyright (C) 2001-2003, Erik Andersen
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+
-+/* This file contains the helper routines to load an ELF sharable
-+ library into memory and add the symbol table info to the chain. */
-+
-+#ifdef USE_CACHE
-+
-+static caddr_t _dl_cache_addr = NULL;
-+static size_t _dl_cache_size = 0;
-+
-+int _dl_map_cache(void)
-+{
-+ int fd;
-+ struct stat st;
-+ header_t *header;
-+ libentry_t *libent;
-+ int i, strtabsize;
-+
-+ if (_dl_cache_addr == (caddr_t) - 1)
-+ return -1;
-+ else if (_dl_cache_addr != NULL)
-+ return 0;
-+
-+ if (_dl_stat(LDSO_CACHE, &st)
-+ || (fd = _dl_open(LDSO_CACHE, O_RDONLY)) < 0) {
-+ _dl_dprintf(2, "%s: can't open cache '%s'\n", _dl_progname, LDSO_CACHE);
-+ _dl_cache_addr = (caddr_t) - 1; /* so we won't try again */
-+ return -1;
-+ }
-+
-+ _dl_cache_size = st.st_size;
-+ _dl_cache_addr = (caddr_t) _dl_mmap(0, _dl_cache_size, PROT_READ, MAP_SHARED, fd, 0);
-+ _dl_close(fd);
-+ if (_dl_mmap_check_error(_dl_cache_addr)) {
-+ _dl_dprintf(2, "%s: can't map cache '%s'\n",
-+ _dl_progname, LDSO_CACHE);
-+ return -1;
-+ }
-+
-+ header = (header_t *) _dl_cache_addr;
-+
-+ if (_dl_cache_size < sizeof(header_t) ||
-+ _dl_memcmp(header->magic, LDSO_CACHE_MAGIC, LDSO_CACHE_MAGIC_LEN)
-+ || _dl_memcmp(header->version, LDSO_CACHE_VER, LDSO_CACHE_VER_LEN)
-+ || _dl_cache_size <
-+ (sizeof(header_t) + header->nlibs * sizeof(libentry_t))
-+ || _dl_cache_addr[_dl_cache_size - 1] != '\0')
-+ {
-+ _dl_dprintf(2, "%s: cache '%s' is corrupt\n", _dl_progname,
-+ LDSO_CACHE);
-+ goto fail;
-+ }
-+
-+ strtabsize = _dl_cache_size - sizeof(header_t) -
-+ header->nlibs * sizeof(libentry_t);
-+ libent = (libentry_t *) & header[1];
-+
-+ for (i = 0; i < header->nlibs; i++) {
-+ if (libent[i].sooffset >= strtabsize ||
-+ libent[i].liboffset >= strtabsize)
-+ {
-+ _dl_dprintf(2, "%s: cache '%s' is corrupt\n", _dl_progname, LDSO_CACHE);
-+ goto fail;
-+ }
-+ }
-+
-+ return 0;
-+
-+ fail:
-+ _dl_munmap(_dl_cache_addr, _dl_cache_size);
-+ _dl_cache_addr = (caddr_t) - 1;
-+ return -1;
-+}
-+
-+int _dl_unmap_cache(void)
-+{
-+ if (_dl_cache_addr == NULL || _dl_cache_addr == (caddr_t) - 1)
-+ return -1;
-+
-+#if 1
-+ _dl_munmap(_dl_cache_addr, _dl_cache_size);
-+ _dl_cache_addr = NULL;
-+#endif
-+
-+ return 0;
-+}
-+
-+#endif
-+
-+/* This function's behavior must exactly match that
-+ * in uClibc/ldso/util/ldd.c */
-+static struct elf_resolve *
-+search_for_named_library(const char *name, int secure, const char *path_list,
-+ struct dyn_elf **rpnt)
-+{
-+ int i, count = 1;
-+ char *path, *path_n;
-+ char mylibname[2050];
-+ struct elf_resolve *tpnt1;
-+
-+ if (path_list==NULL)
-+ return NULL;
-+
-+ /* We need a writable copy of this string */
-+ path = _dl_strdup(path_list);
-+ if (!path) {
-+ _dl_dprintf(2, "Out of memory!\n");
-+ _dl_exit(0);
-+ }
-+
-+
-+ /* Unlike ldd.c, don't bother to eliminate double //s */
-+
-+
-+ /* Replace colons with zeros in path_list and count them */
-+ for(i=_dl_strlen(path); i > 0; i--) {
-+ if (path[i]==':') {
-+ path[i]=0;
-+ count++;
-+ }
-+ }
-+
-+ path_n = path;
-+ for (i = 0; i < count; i++) {
-+ _dl_strcpy(mylibname, path_n);
-+ _dl_strcat(mylibname, "/");
-+ _dl_strcat(mylibname, name);
-+ if ((tpnt1 = _dl_load_elf_shared_library(secure, rpnt, mylibname)) != NULL)
-+ {
-+ return tpnt1;
-+ }
-+ path_n += (_dl_strlen(path_n) + 1);
-+ }
-+ return NULL;
-+}
-+
-+/* Check if the named library is already loaded... */
-+struct elf_resolve *_dl_check_if_named_library_is_loaded(const char *full_libname)
-+{
-+ const char *pnt, *pnt1;
-+ struct elf_resolve *tpnt1;
-+ const char *libname, *libname2;
-+ static const char *libc = "libc.so.";
-+ static const char *aborted_wrong_lib = "%s: aborted attempt to load %s!\n";
-+
-+ pnt = libname = full_libname;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug)
-+ _dl_dprintf(_dl_debug_file, "Checking if '%s' is already loaded\n", full_libname);
-+#endif
-+ /* quick hack to ensure mylibname buffer doesn't overflow. don't
-+ allow full_libname or any directory to be longer than 1024. */
-+ if (_dl_strlen(full_libname) > 1024)
-+ return NULL;
-+
-+ /* Skip over any initial initial './' and '/' stuff to
-+ * get the short form libname with no path garbage */
-+ pnt1 = _dl_strrchr(pnt, '/');
-+ if (pnt1) {
-+ libname = pnt1 + 1;
-+ }
-+
-+ /* Make sure they are not trying to load the wrong C library!
-+ * This sometimes happens esp with shared libraries when the
-+ * library path is somehow wrong! */
-+#define isdigit(c) (c >= '0' && c <= '9')
-+ if ((_dl_strncmp(libname, libc, 8) == 0) && _dl_strlen(libname) >=8 &&
-+ isdigit(libname[8]))
-+ {
-+ /* Abort attempts to load glibc, libc5, etc */
-+ if ( libname[8]!='0') {
-+ if (!_dl_trace_loaded_objects) {
-+ _dl_dprintf(2, aborted_wrong_lib, libname, _dl_progname);
-+ _dl_exit(1);
-+ }
-+ return NULL;
-+ }
-+ }
-+
-+ /* Critical step! Weed out duplicates early to avoid
-+ * function aliasing, which wastes memory, and causes
-+ * really bad things to happen with weaks and globals. */
-+ for (tpnt1 = _dl_loaded_modules; tpnt1; tpnt1 = tpnt1->next) {
-+
-+ /* Skip over any initial initial './' and '/' stuff to
-+ * get the short form libname with no path garbage */
-+ libname2 = tpnt1->libname;
-+ pnt1 = _dl_strrchr(libname2, '/');
-+ if (pnt1) {
-+ libname2 = pnt1 + 1;
-+ }
-+
-+ if (_dl_strcmp(libname2, libname) == 0) {
-+ /* Well, that was certainly easy */
-+ return tpnt1;
-+ }
-+ }
-+
-+ return NULL;
-+}
-+
-+
-+
-+/*
-+ * Used to return error codes back to dlopen et. al.
-+ */
-+
-+unsigned long _dl_error_number;
-+unsigned long _dl_internal_error_number;
-+extern char *_dl_ldsopath;
-+
-+struct elf_resolve *_dl_load_shared_library(int secure, struct dyn_elf **rpnt,
-+ struct elf_resolve *tpnt, char *full_libname)
-+{
-+ char *pnt, *pnt1;
-+ struct elf_resolve *tpnt1;
-+ char *libname;
-+
-+ _dl_internal_error_number = 0;
-+ libname = full_libname;
-+
-+ /* quick hack to ensure mylibname buffer doesn't overflow. don't
-+ allow full_libname or any directory to be longer than 1024. */
-+ if (_dl_strlen(full_libname) > 1024)
-+ goto goof;
-+
-+ /* Skip over any initial initial './' and '/' stuff to
-+ * get the short form libname with no path garbage */
-+ pnt1 = _dl_strrchr(libname, '/');
-+ if (pnt1) {
-+ libname = pnt1 + 1;
-+ }
-+
-+ /* Critical step! Weed out duplicates early to avoid
-+ * function aliasing, which wastes memory, and causes
-+ * really bad things to happen with weaks and globals. */
-+ if ((tpnt1=_dl_check_if_named_library_is_loaded(libname))!=NULL)
-+ return tpnt1;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tfind library='%s'; searching\n", libname);
-+#endif
-+ /* If the filename has any '/', try it straight and leave it at that.
-+ For IBCS2 compatibility under linux, we substitute the string
-+ /usr/i486-sysv4/lib for /usr/lib in library names. */
-+
-+ if (libname != full_libname) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\ttrying file='%s'\n", full_libname);
-+#endif
-+ tpnt1 = _dl_load_elf_shared_library(secure, rpnt, full_libname);
-+ if (tpnt1) {
-+ return tpnt1;
-+ }
-+ //goto goof;
-+ }
-+
-+ /*
-+ * The ABI specifies that RPATH is searched before LD_*_PATH or
-+ * the default path of /usr/lib. Check in rpath directories.
-+ */
-+ for (tpnt = _dl_loaded_modules; tpnt; tpnt = tpnt->next) {
-+ if (tpnt->libtype == elf_executable) {
-+ pnt = (char *) tpnt->dynamic_info[DT_RPATH];
-+ if (pnt) {
-+ pnt += (unsigned long) tpnt->loadaddr + tpnt->dynamic_info[DT_STRTAB];
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tsearching RPATH='%s'\n", pnt);
-+#endif
-+ if ((tpnt1 = search_for_named_library(libname, secure, pnt, rpnt)) != NULL)
-+ {
-+ return tpnt1;
-+ }
-+ }
-+ }
-+ }
-+
-+ /* Check in LD_{ELF_}LIBRARY_PATH, if specified and allowed */
-+ if (_dl_library_path) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tsearching LD_LIBRARY_PATH='%s'\n", _dl_library_path);
-+#endif
-+ if ((tpnt1 = search_for_named_library(libname, secure, _dl_library_path, rpnt)) != NULL)
-+ {
-+ return tpnt1;
-+ }
-+ }
-+
-+ /*
-+ * Where should the cache be searched? There is no such concept in the
-+ * ABI, so we have some flexibility here. For now, search it before
-+ * the hard coded paths that follow (i.e before /lib and /usr/lib).
-+ */
-+#ifdef USE_CACHE
-+ if (_dl_cache_addr != NULL && _dl_cache_addr != (caddr_t) - 1) {
-+ int i;
-+ header_t *header = (header_t *) _dl_cache_addr;
-+ libentry_t *libent = (libentry_t *) & header[1];
-+ char *strs = (char *) &libent[header->nlibs];
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tsearching cache='%s'\n", LDSO_CACHE);
-+#endif
-+ for (i = 0; i < header->nlibs; i++) {
-+ if ((libent[i].flags == LIB_ELF ||
-+ libent[i].flags == LIB_ELF_LIBC5) &&
-+ _dl_strcmp(libname, strs + libent[i].sooffset) == 0 &&
-+ (tpnt1 = _dl_load_elf_shared_library(secure,
-+ rpnt, strs + libent[i].liboffset)))
-+ return tpnt1;
-+ }
-+ }
-+#endif
-+
-+ /* Look for libraries wherever the shared library loader
-+ * was installed */
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tsearching ldso dir='%s'\n", _dl_ldsopath);
-+#endif
-+ if ((tpnt1 = search_for_named_library(libname, secure, _dl_ldsopath, rpnt)) != NULL)
-+ {
-+ return tpnt1;
-+ }
-+
-+
-+ /* Lastly, search the standard list of paths for the library.
-+ This list must exactly match the list in uClibc/ldso/util/ldd.c */
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file, "\tsearching full lib path list\n");
-+#endif
-+ if ((tpnt1 = search_for_named_library(libname, secure,
-+ UCLIBC_RUNTIME_PREFIX "usr/X11R6/lib:"
-+ UCLIBC_RUNTIME_PREFIX "usr/lib:"
-+ UCLIBC_RUNTIME_PREFIX "lib:"
-+ "/usr/lib:"
-+ "/lib", rpnt)
-+ ) != NULL)
-+ {
-+ return tpnt1;
-+ }
-+
-+goof:
-+ /* Well, we shot our wad on that one. All we can do now is punt */
-+ if (_dl_internal_error_number)
-+ _dl_error_number = _dl_internal_error_number;
-+ else
-+ _dl_error_number = LD_ERROR_NOFILE;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(2, "Bummer: could not find '%s'!\n", libname);
-+#endif
-+ return NULL;
-+}
-+
-+
-+/*
-+ * Read one ELF library into memory, mmap it into the correct locations and
-+ * add the symbol info to the symbol chain. Perform any relocations that
-+ * are required.
-+ */
-+
-+struct elf_resolve *_dl_load_elf_shared_library(int secure,
-+ struct dyn_elf **rpnt, char *libname)
-+{
-+ ElfW(Ehdr) *epnt;
-+ unsigned long dynamic_addr = 0;
-+ unsigned long dynamic_size = 0;
-+ Elf32_Dyn *dpnt;
-+ struct elf_resolve *tpnt;
-+ ElfW(Phdr) *ppnt;
-+ char *status, *header;
-+ unsigned long dynamic_info[24];
-+ unsigned long *lpnt;
-+ unsigned long libaddr;
-+ unsigned long minvma = 0xffffffff, maxvma = 0;
-+ int i, flags, piclib, infile;
-+
-+ /* If this file is already loaded, skip this step */
-+ tpnt = _dl_check_hashed_files(libname);
-+ if (tpnt) {
-+ if (*rpnt) {
-+ (*rpnt)->next = (struct dyn_elf *) _dl_malloc(sizeof(struct dyn_elf));
-+ _dl_memset((*rpnt)->next, 0, sizeof(struct dyn_elf));
-+ (*rpnt)->next->prev = (*rpnt);
-+ *rpnt = (*rpnt)->next;
-+ (*rpnt)->dyn = tpnt;
-+ tpnt->symbol_scope = _dl_symbol_tables;
-+ }
-+ tpnt->usage_count++;
-+ tpnt->libtype = elf_lib;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(2, "file='%s'; already loaded\n", libname);
-+#endif
-+ return tpnt;
-+ }
-+
-+ /* If we are in secure mode (i.e. a setu/gid binary using LD_PRELOAD),
-+ we don't load the library if it isn't setuid. */
-+
-+ if (secure) {
-+ struct stat st;
-+
-+ if (_dl_stat(libname, &st) || !(st.st_mode & S_ISUID))
-+ return NULL;
-+ }
-+
-+ libaddr = 0;
-+ infile = _dl_open(libname, O_RDONLY);
-+ if (infile < 0) {
-+#if 0
-+ /*
-+ * NO! When we open shared libraries we may search several paths.
-+ * it is inappropriate to generate an error here.
-+ */
-+ _dl_dprintf(2, "%s: can't open '%s'\n", _dl_progname, libname);
-+#endif
-+ _dl_internal_error_number = LD_ERROR_NOFILE;
-+ return NULL;
-+ }
-+
-+ header = _dl_mmap((void *) 0, 4096, PROT_READ | PROT_WRITE,
-+ MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
-+ if (_dl_mmap_check_error(header)) {
-+ _dl_dprintf(2, "%s: can't map '%s'\n", _dl_progname, libname);
-+ _dl_internal_error_number = LD_ERROR_MMAP_FAILED;
-+ _dl_close(infile);
-+ return NULL;
-+ };
-+
-+ _dl_read(infile, header, 4096);
-+ epnt = (ElfW(Ehdr) *) (intptr_t) header;
-+ if (epnt->e_ident[0] != 0x7f ||
-+ epnt->e_ident[1] != 'E' ||
-+ epnt->e_ident[2] != 'L' ||
-+ epnt->e_ident[3] != 'F')
-+ {
-+ _dl_dprintf(2, "%s: '%s' is not an ELF file\n", _dl_progname,
-+ libname);
-+ _dl_internal_error_number = LD_ERROR_NOTELF;
-+ _dl_close(infile);
-+ _dl_munmap(header, 4096);
-+ return NULL;
-+ };
-+
-+ if ((epnt->e_type != ET_DYN) || (epnt->e_machine != MAGIC1
-+#ifdef MAGIC2
-+ && epnt->e_machine != MAGIC2
-+#endif
-+ ))
-+ {
-+ _dl_internal_error_number =
-+ (epnt->e_type != ET_DYN ? LD_ERROR_NOTDYN : LD_ERROR_NOTMAGIC);
-+ _dl_dprintf(2, "%s: '%s' is not an ELF executable for " ELF_TARGET
-+ "\n", _dl_progname, libname);
-+ _dl_close(infile);
-+ _dl_munmap(header, 4096);
-+ return NULL;
-+ };
-+
-+ ppnt = (ElfW(Phdr) *)(intptr_t) & header[epnt->e_phoff];
-+
-+ piclib = 1;
-+ for (i = 0; i < epnt->e_phnum; i++) {
-+
-+ if (ppnt->p_type == PT_DYNAMIC) {
-+ if (dynamic_addr)
-+ _dl_dprintf(2, "%s: '%s' has more than one dynamic section\n",
-+ _dl_progname, libname);
-+ dynamic_addr = ppnt->p_vaddr;
-+ dynamic_size = ppnt->p_filesz;
-+ };
-+
-+ if (ppnt->p_type == PT_LOAD) {
-+ /* See if this is a PIC library. */
-+ if (i == 0 && ppnt->p_vaddr > 0x1000000) {
-+ piclib = 0;
-+ minvma = ppnt->p_vaddr;
-+ }
-+ if (piclib && ppnt->p_vaddr < minvma) {
-+ minvma = ppnt->p_vaddr;
-+ }
-+ if (((unsigned long) ppnt->p_vaddr + ppnt->p_memsz) > maxvma) {
-+ maxvma = ppnt->p_vaddr + ppnt->p_memsz;
-+ }
-+ }
-+ ppnt++;
-+ };
-+
-+ maxvma = (maxvma + ADDR_ALIGN) & ~ADDR_ALIGN;
-+ minvma = minvma & ~0xffffU;
-+
-+ flags = MAP_PRIVATE /*| MAP_DENYWRITE */ ;
-+ if (!piclib)
-+ flags |= MAP_FIXED;
-+
-+ status = (char *) _dl_mmap((char *) (piclib ? 0 : minvma),
-+ maxvma - minvma, PROT_NONE, flags | MAP_ANONYMOUS, -1, 0);
-+ if (_dl_mmap_check_error(status)) {
-+ _dl_dprintf(2, "%s: can't map %s\n", _dl_progname, libname);
-+ _dl_internal_error_number = LD_ERROR_MMAP_FAILED;
-+ _dl_close(infile);
-+ _dl_munmap(header, 4096);
-+ return NULL;
-+ };
-+ libaddr = (unsigned long) status;
-+ flags |= MAP_FIXED;
-+
-+ /* Get the memory to store the library */
-+ ppnt = (ElfW(Phdr) *)(intptr_t) & header[epnt->e_phoff];
-+
-+ for (i = 0; i < epnt->e_phnum; i++) {
-+ if (ppnt->p_type == PT_LOAD) {
-+
-+ /* See if this is a PIC library. */
-+ if (i == 0 && ppnt->p_vaddr > 0x1000000) {
-+ piclib = 0;
-+ /* flags |= MAP_FIXED; */
-+ }
-+
-+
-+
-+ if (ppnt->p_flags & PF_W) {
-+ unsigned long map_size;
-+ char *cpnt;
-+
-+ status = (char *) _dl_mmap((char *) ((piclib ? libaddr : 0) +
-+ (ppnt->p_vaddr & PAGE_ALIGN)), (ppnt->p_vaddr & ADDR_ALIGN)
-+ + ppnt->p_filesz, LXFLAGS(ppnt->p_flags), flags, infile,
-+ ppnt->p_offset & OFFS_ALIGN);
-+
-+ if (_dl_mmap_check_error(status)) {
-+ _dl_dprintf(2, "%s: can't map '%s'\n",
-+ _dl_progname, libname);
-+ _dl_internal_error_number = LD_ERROR_MMAP_FAILED;
-+ _dl_munmap((char *) libaddr, maxvma - minvma);
-+ _dl_close(infile);
-+ _dl_munmap(header, 4096);
-+ return NULL;
-+ };
-+
-+ /* Pad the last page with zeroes. */
-+ cpnt = (char *) (status + (ppnt->p_vaddr & ADDR_ALIGN) +
-+ ppnt->p_filesz);
-+ while (((unsigned long) cpnt) & ADDR_ALIGN)
-+ *cpnt++ = 0;
-+
-+ /* I am not quite sure if this is completely
-+ * correct to do or not, but the basic way that
-+ * we handle bss segments is that we mmap
-+ * /dev/zero if there are any pages left over
-+ * that are not mapped as part of the file */
-+
-+ map_size = (ppnt->p_vaddr + ppnt->p_filesz + ADDR_ALIGN) & PAGE_ALIGN;
-+
-+ if (map_size < ppnt->p_vaddr + ppnt->p_memsz)
-+ status = (char *) _dl_mmap((char *) map_size +
-+ (piclib ? libaddr : 0),
-+ ppnt->p_vaddr + ppnt->p_memsz - map_size,
-+ LXFLAGS(ppnt->p_flags), flags | MAP_ANONYMOUS, -1, 0);
-+ } else
-+ status = (char *) _dl_mmap((char *) (ppnt->p_vaddr & PAGE_ALIGN)
-+ + (piclib ? libaddr : 0), (ppnt->p_vaddr & ADDR_ALIGN) +
-+ ppnt->p_filesz, LXFLAGS(ppnt->p_flags), flags,
-+ infile, ppnt->p_offset & OFFS_ALIGN);
-+ if (_dl_mmap_check_error(status)) {
-+ _dl_dprintf(2, "%s: can't map '%s'\n", _dl_progname, libname);
-+ _dl_internal_error_number = LD_ERROR_MMAP_FAILED;
-+ _dl_munmap((char *) libaddr, maxvma - minvma);
-+ _dl_close(infile);
-+ _dl_munmap(header, 4096);
-+ return NULL;
-+ };
-+
-+ /* if(libaddr == 0 && piclib) {
-+ libaddr = (unsigned long) status;
-+ flags |= MAP_FIXED;
-+ }; */
-+ };
-+ ppnt++;
-+ };
-+ _dl_close(infile);
-+
-+ /* For a non-PIC library, the addresses are all absolute */
-+ if (piclib) {
-+ dynamic_addr += (unsigned long) libaddr;
-+ }
-+
-+ /*
-+ * OK, the ELF library is now loaded into VM in the correct locations
-+ * The next step is to go through and do the dynamic linking (if needed).
-+ */
-+
-+ /* Start by scanning the dynamic section to get all of the pointers */
-+
-+ if (!dynamic_addr) {
-+ _dl_internal_error_number = LD_ERROR_NODYNAMIC;
-+ _dl_dprintf(2, "%s: '%s' is missing a dynamic section\n",
-+ _dl_progname, libname);
-+ _dl_munmap(header, 4096);
-+ return NULL;
-+ }
-+
-+ dpnt = (Elf32_Dyn *) dynamic_addr;
-+
-+ dynamic_size = dynamic_size / sizeof(Elf32_Dyn);
-+ _dl_memset(dynamic_info, 0, sizeof(dynamic_info));
-+
-+#if defined(__mips__)
-+ {
-+
-+ int indx = 1;
-+ Elf32_Dyn *dpnt = (Elf32_Dyn *) dynamic_addr;
-+
-+ while(dpnt->d_tag) {
-+ dpnt++;
-+ indx++;
-+ }
-+ dynamic_size = indx;
-+ }
-+#endif
-+
-+ {
-+ unsigned long indx;
-+
-+ for (indx = 0; indx < dynamic_size; indx++)
-+ {
-+ if (dpnt->d_tag > DT_JMPREL) {
-+ dpnt++;
-+ continue;
-+ }
-+ dynamic_info[dpnt->d_tag] = dpnt->d_un.d_val;
-+ if (dpnt->d_tag == DT_TEXTREL)
-+ dynamic_info[DT_TEXTREL] = 1;
-+ dpnt++;
-+ };
-+ }
-+
-+ /* If the TEXTREL is set, this means that we need to make the pages
-+ writable before we perform relocations. Do this now. They get set
-+ back again later. */
-+
-+ if (dynamic_info[DT_TEXTREL]) {
-+#ifndef FORCE_SHAREABLE_TEXT_SEGMENTS
-+ ppnt = (ElfW(Phdr) *)(intptr_t) & header[epnt->e_phoff];
-+ for (i = 0; i < epnt->e_phnum; i++, ppnt++) {
-+ if (ppnt->p_type == PT_LOAD && !(ppnt->p_flags & PF_W))
-+ _dl_mprotect((void *) ((piclib ? libaddr : 0) +
-+ (ppnt->p_vaddr & PAGE_ALIGN)),
-+ (ppnt->p_vaddr & ADDR_ALIGN) + (unsigned long) ppnt->p_filesz,
-+ PROT_READ | PROT_WRITE | PROT_EXEC);
-+ }
-+#else
-+ _dl_dprintf(_dl_debug_file, "Can't modify %s's text section. Use GCC option -fPIC for shared objects, please.\n",libname);
-+ _dl_exit(1);
-+#endif
-+ }
-+
-+ tpnt = _dl_add_elf_hash_table(libname, (char *) libaddr, dynamic_info,
-+ dynamic_addr, dynamic_size);
-+
-+ tpnt->ppnt = (ElfW(Phdr) *)(intptr_t) (tpnt->loadaddr + epnt->e_phoff);
-+ tpnt->n_phent = epnt->e_phnum;
-+
-+ /*
-+ * Add this object into the symbol chain
-+ */
-+ if (*rpnt) {
-+ (*rpnt)->next = (struct dyn_elf *) _dl_malloc(sizeof(struct dyn_elf));
-+ _dl_memset((*rpnt)->next, 0, sizeof(struct dyn_elf));
-+ (*rpnt)->next->prev = (*rpnt);
-+ *rpnt = (*rpnt)->next;
-+ (*rpnt)->dyn = tpnt;
-+ tpnt->symbol_scope = _dl_symbol_tables;
-+ }
-+ tpnt->usage_count++;
-+ tpnt->libtype = elf_lib;
-+
-+ /*
-+ * OK, the next thing we need to do is to insert the dynamic linker into
-+ * the proper entry in the GOT so that the PLT symbols can be properly
-+ * resolved.
-+ */
-+
-+ lpnt = (unsigned long *) dynamic_info[DT_PLTGOT];
-+
-+ if (lpnt) {
-+ lpnt = (unsigned long *) (dynamic_info[DT_PLTGOT] +
-+ ((int) libaddr));
-+ INIT_GOT(lpnt, tpnt);
-+ };
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) {
-+ _dl_dprintf(2, "\n\tfile='%s'; generating link map\n", libname);
-+ _dl_dprintf(2, "\t\tdynamic: %x base: %x size: %x\n",
-+ dynamic_addr, libaddr, dynamic_size);
-+ _dl_dprintf(2, "\t\t entry: %x phdr: %x phnum: %d\n\n",
-+ epnt->e_entry + libaddr, tpnt->ppnt, tpnt->n_phent);
-+
-+ }
-+#endif
-+ _dl_munmap(header, 4096);
-+
-+ return tpnt;
-+}
-+
-+/* Ugly, ugly. Some versions of the SVr4 linker fail to generate COPY
-+ relocations for global variables that are present both in the image and
-+ the shared library. Go through and do it manually. If the images
-+ are guaranteed to be generated by a trustworthy linker, then this
-+ step can be skipped. */
-+
-+int _dl_copy_fixups(struct dyn_elf *rpnt)
-+{
-+ int goof = 0;
-+ struct elf_resolve *tpnt;
-+
-+ if (rpnt->next)
-+ goof += _dl_copy_fixups(rpnt->next);
-+ else
-+ return 0;
-+
-+ tpnt = rpnt->dyn;
-+
-+ if (tpnt->init_flag & COPY_RELOCS_DONE)
-+ return goof;
-+ tpnt->init_flag |= COPY_RELOCS_DONE;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file,"\nrelocation copy fixups: %s", tpnt->libname);
-+#endif
-+
-+#ifdef ELF_USES_RELOCA
-+ goof += _dl_parse_copy_information(rpnt,
-+ tpnt->dynamic_info[DT_RELA], tpnt->dynamic_info[DT_RELASZ], 0);
-+
-+#else
-+ goof += _dl_parse_copy_information(rpnt, tpnt->dynamic_info[DT_REL],
-+ tpnt->dynamic_info[DT_RELSZ], 0);
-+
-+#endif
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file,"\nrelocation copy fixups: %s; finished\n\n", tpnt->libname);
-+#endif
-+ return goof;
-+}
-+
-+/* Minimal printf which handles only %s, %d, and %x */
-+void _dl_dprintf(int fd, const char *fmt, ...)
-+{
-+ int num;
-+ va_list args;
-+ char *start, *ptr, *string;
-+ static char *buf;
-+
-+ buf = _dl_mmap((void *) 0, 4096, PROT_READ | PROT_WRITE,
-+ MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
-+ if (_dl_mmap_check_error(buf)) {
-+ _dl_dprintf(2, "%s: mmap of a spare page failed!\n", _dl_progname);
-+ _dl_exit(20);
-+ }
-+
-+ start = ptr = buf;
-+
-+ if (!fmt)
-+ return;
-+
-+ if (_dl_strlen(fmt) >= (sizeof(buf) - 1))
-+ _dl_write(fd, "(overflow)\n", 10);
-+
-+ _dl_strcpy(buf, fmt);
-+ va_start(args, fmt);
-+
-+ while (start) {
-+ while (*ptr != '%' && *ptr) {
-+ ptr++;
-+ }
-+
-+ if (*ptr == '%') {
-+ *ptr++ = '\0';
-+ _dl_write(fd, start, _dl_strlen(start));
-+
-+ switch (*ptr++) {
-+ case 's':
-+ string = va_arg(args, char *);
-+
-+ if (!string)
-+ _dl_write(fd, "(null)", 6);
-+ else
-+ _dl_write(fd, string, _dl_strlen(string));
-+ break;
-+
-+ case 'i':
-+ case 'd':
-+ {
-+ char tmp[22];
-+ num = va_arg(args, int);
-+
-+ string = _dl_simple_ltoa(tmp, num);
-+ _dl_write(fd, string, _dl_strlen(string));
-+ break;
-+ }
-+ case 'x':
-+ case 'X':
-+ {
-+ char tmp[22];
-+ num = va_arg(args, int);
-+
-+ string = _dl_simple_ltoahex(tmp, num);
-+ _dl_write(fd, string, _dl_strlen(string));
-+ break;
-+ }
-+ default:
-+ _dl_write(fd, "(null)", 6);
-+ break;
-+ }
-+
-+ start = ptr;
-+ } else {
-+ _dl_write(fd, start, _dl_strlen(start));
-+ start = NULL;
-+ }
-+ }
-+ _dl_munmap(buf, 4096);
-+ return;
-+}
-+
-+char *_dl_strdup(const char *string)
-+{
-+ char *retval;
-+ int len;
-+
-+ len = _dl_strlen(string);
-+ retval = _dl_malloc(len + 1);
-+ _dl_strcpy(retval, string);
-+ return retval;
-+}
-+
-+void *(*_dl_malloc_function) (size_t size) = NULL;
-+void *_dl_malloc(int size)
-+{
-+ void *retval;
-+
-+#if 0
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(2, "malloc: request for %d bytes\n", size);
-+#endif
-+#endif
-+
-+ if (_dl_malloc_function)
-+ return (*_dl_malloc_function) (size);
-+
-+ if (_dl_malloc_addr - _dl_mmap_zero + size > 4096) {
-+#ifdef __SUPPORT_LD_DEBUG_EARLY__
-+ _dl_dprintf(2, "malloc: mmapping more memory\n");
-+#endif
-+ _dl_mmap_zero = _dl_malloc_addr = _dl_mmap((void *) 0, size,
-+ PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
-+ if (_dl_mmap_check_error(_dl_mmap_zero)) {
-+ _dl_dprintf(2, "%s: mmap of a spare page failed!\n", _dl_progname);
-+ _dl_exit(20);
-+ }
-+ }
-+ retval = _dl_malloc_addr;
-+ _dl_malloc_addr += size;
-+
-+ /*
-+ * Align memory to 4 byte boundary. Some platforms require this, others
-+ * simply get better performance.
-+ */
-+ _dl_malloc_addr = (char *) (((unsigned long) _dl_malloc_addr + 3) & ~(3));
-+ return retval;
-+}
-+
-+int _dl_fixup(struct elf_resolve *tpnt, int flag)
-+{
-+ int goof = 0;
-+
-+ if (tpnt->next)
-+ goof += _dl_fixup(tpnt->next, flag);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(_dl_debug_file,"\nrelocation processing: %s", tpnt->libname);
-+#endif
-+
-+ if (tpnt->dynamic_info[DT_REL]) {
-+#ifdef ELF_USES_RELOCA
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(2, "%s: can't handle REL relocation records\n", _dl_progname);
-+#endif
-+ goof++;
-+ return goof;
-+#else
-+ if (tpnt->init_flag & RELOCS_DONE)
-+ return goof;
-+ tpnt->init_flag |= RELOCS_DONE;
-+ goof += _dl_parse_relocation_information(tpnt,
-+ tpnt->dynamic_info[DT_REL],
-+ tpnt->dynamic_info[DT_RELSZ], 0);
-+#endif
-+ }
-+ if (tpnt->dynamic_info[DT_RELA]) {
-+#ifndef ELF_USES_RELOCA
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) _dl_dprintf(2, "%s: can't handle RELA relocation records\n", _dl_progname);
-+#endif
-+ goof++;
-+ return goof;
-+#else
-+ if (tpnt->init_flag & RELOCS_DONE)
-+ return goof;
-+ tpnt->init_flag |= RELOCS_DONE;
-+ goof += _dl_parse_relocation_information(tpnt,
-+ tpnt->dynamic_info[DT_RELA],
-+ tpnt->dynamic_info[DT_RELASZ], 0);
-+#endif
-+ }
-+ if (tpnt->dynamic_info[DT_JMPREL]) {
-+ if (tpnt->init_flag & JMP_RELOCS_DONE)
-+ return goof;
-+ tpnt->init_flag |= JMP_RELOCS_DONE;
-+ if (flag & RTLD_LAZY) {
-+ _dl_parse_lazy_relocation_information(tpnt,
-+ tpnt->dynamic_info[DT_JMPREL],
-+ tpnt->dynamic_info [DT_PLTRELSZ], 0);
-+ } else {
-+ goof += _dl_parse_relocation_information(tpnt,
-+ tpnt->dynamic_info[DT_JMPREL],
-+ tpnt->dynamic_info[DT_PLTRELSZ], 0);
-+ }
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug) {
-+ _dl_dprintf(_dl_debug_file,"\nrelocation processing: %s", tpnt->libname);
-+ _dl_dprintf(_dl_debug_file,"; finished\n\n");
-+ }
-+#endif
-+ return goof;
-+}
-+
-+
-diff -urN uClibc/ldso-0.9.24/ldso/sh/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/sh/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/sh/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sh/boot1_arch.h 2002-11-03 08:12:29.000000000 -0600
-@@ -0,0 +1,22 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture. */
-+
-+asm("" \
-+" .text\n" \
-+" .globl _dl_boot\n" \
-+"_dl_boot:\n" \
-+" mov r15, r4\n" \
-+" mov.l .L_dl_boot2, r0\n" \
-+" bsrf r0\n" \
-+" add #4, r4\n" \
-+".jmp_loc:\n" \
-+" jmp @r0\n" \
-+" mov #0, r4 !call _start with arg == 0\n" \
-+".L_dl_boot2:\n" \
-+" .long _dl_boot2-.jmp_loc\n" \
-+" .previous\n" \
-+);
-+
-+#define _dl_boot _dl_boot2
-+#define LD_BOOT(X) static void * __attribute__ ((unused)) _dl_boot (X)
-diff -urN uClibc/ldso-0.9.24/ldso/sh/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/sh/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/sh/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sh/elfinterp.c 2003-09-11 05:26:16.000000000 -0500
-@@ -0,0 +1,427 @@
-+/* vi: set sw=4 ts=4: */
-+/* SuperH ELF shared library loader suppport
-+ *
-+ * Copyright (C) 2002, Stefan Allius <allius@atecom.com> and
-+ * Eddie C. Dost <ecd@atecom.com>
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char *_dl_reltypes_tab[] =
-+{
-+ [0] "R_SH_NONE", "R_SH_DIR32", "R_SH_REL32", "R_SH_DIR8WPN",
-+ [4] "R_SH_IND12W", "R_SH_DIR8WPL", "R_SH_DIR8WPZ", "R_SH_DIR8BP",
-+ [8] "R_SH_DIR8W", "R_SH_DIR8L",
-+ [25] "R_SH_SWITCH16","R_SH_SWITCH32","R_SH_USES",
-+ [28] "R_SH_COUNT", "R_SH_ALIGN", "R_SH_CODE", "R_SH_DATA",
-+ [32] "R_SH_LABEL", "R_SH_SWITCH8", "R_SH_GNU_VTINHERIT","R_SH_GNU_VTENTRY",
-+[160] "R_SH_GOT32", "R_SH_PLT32", "R_SH_COPY", "R_SH_GLOB_DAT",
-+[164] "R_SH_JMP_SLOT","R_SH_RELATIVE","R_SH_GOTOFF", "R_SH_GOTPC",
-+};
-+
-+static const char *
-+_dl_reltypes(int type)
-+{
-+ static char buf[22];
-+ const char *str;
-+
-+ if (type >= (int)(sizeof (_dl_reltypes_tab)/sizeof(_dl_reltypes_tab[0])) ||
-+ NULL == (str = _dl_reltypes_tab[type]))
-+ {
-+ str =_dl_simple_ltoa( buf, (unsigned long)(type));
-+ }
-+ return str;
-+}
-+
-+static
-+void debug_sym(Elf32_Sym *symtab,char *strtab,int symtab_index)
-+{
-+ if(_dl_debug_symbols)
-+ {
-+ if(symtab_index){
-+ _dl_dprintf(_dl_debug_file, "\n%s\tvalue=%x\tsize=%x\tinfo=%x\tother=%x\tshndx=%x",
-+ strtab + symtab[symtab_index].st_name,
-+ symtab[symtab_index].st_value,
-+ symtab[symtab_index].st_size,
-+ symtab[symtab_index].st_info,
-+ symtab[symtab_index].st_other,
-+ symtab[symtab_index].st_shndx);
-+ }
-+ }
-+}
-+
-+static void debug_reloc(Elf32_Sym *symtab,char *strtab, ELF_RELOC *rpnt)
-+{
-+ if(_dl_debug_reloc)
-+ {
-+ int symtab_index;
-+ const char *sym;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ sym = symtab_index ? strtab + symtab[symtab_index].st_name : "sym=0x0";
-+
-+ if(_dl_debug_symbols)
-+ _dl_dprintf(_dl_debug_file, "\n\t");
-+ else
-+ _dl_dprintf(_dl_debug_file, "\n%s\n\t", sym);
-+
-+#ifdef ELF_USES_RELOCA
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\taddend=%x",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset,
-+ rpnt->r_addend);
-+#else
-+ _dl_dprintf(_dl_debug_file, "%s\toffset=%x\n",
-+ _dl_reltypes(ELF32_R_TYPE(rpnt->r_info)),
-+ rpnt->r_offset);
-+#endif
-+ }
-+}
-+#endif
-+
-+/* Program to load an ELF binary on a linux system, and run it.
-+ References to symbols in sharable libraries can be resolved by either
-+ an ELF sharable library or a linux style of shared library. */
-+
-+/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
-+ I ever taken any courses on internals. This program was developed using
-+ information available through the book "UNIX SYSTEM V RELEASE 4,
-+ Programmers guide: Ansi C and Programming Support Tools", which did
-+ a more than adequate job of explaining everything required to get this
-+ working. */
-+
-+extern int _dl_linux_resolve(void);
-+
-+unsigned long _dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry)
-+{
-+ int reloc_type;
-+ ELF_RELOC *this_reloc;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ int symtab_index;
-+ char *rel_addr;
-+ char *new_addr;
-+ char **got_addr;
-+ unsigned long instr_addr;
-+ char *symname;
-+
-+ rel_addr = (char *) (tpnt->dynamic_info[DT_JMPREL] + tpnt->loadaddr);
-+
-+ this_reloc = (ELF_RELOC *)(intptr_t)(rel_addr + reloc_entry);
-+ reloc_type = ELF32_R_TYPE(this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM(this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *)(intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (reloc_type != R_SH_JMP_SLOT) {
-+ _dl_dprintf(2, "%s: Incorrect relocation type in jump relocations\n",
-+ _dl_progname);
-+ _dl_exit(1);
-+ }
-+
-+ /* Address of jump instruction to fix up */
-+ instr_addr = ((unsigned long) this_reloc->r_offset +
-+ (unsigned long) tpnt->loadaddr);
-+ got_addr = (char **) instr_addr;
-+
-+
-+ /* Get the address of the GOT entry */
-+ new_addr = _dl_find_hash(symname, tpnt->symbol_scope, tpnt, resolver);
-+ if (!new_addr) {
-+ new_addr = _dl_find_hash(symname, NULL, NULL, resolver);
-+ if (new_addr) {
-+ return (unsigned long) new_addr;
-+ }
-+
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n", _dl_progname, symname);
-+ _dl_exit(1);
-+ }
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if ((unsigned long) got_addr < 0x20000000)
-+ {
-+ if (_dl_debug_bindings)
-+ {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname);
-+ if(_dl_debug_detail) _dl_dprintf(_dl_debug_file,
-+ "\n\tpatched %x ==> %x @ %x\n", *got_addr, new_addr, got_addr);
-+ }
-+ }
-+ if (!_dl_debug_nofixups) {
-+ *got_addr = new_addr;
-+ }
-+#else
-+ *got_addr = new_addr;
-+#endif
-+
-+ return (unsigned long) new_addr;
-+}
-+
-+
-+static int
-+_dl_parse(struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ unsigned long rel_addr, unsigned long rel_size,
-+ int (*reloc_fnc) (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab))
-+{
-+ unsigned int i;
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ ELF_RELOC *rpnt;
-+ int symtab_index;
-+ /* Now parse the relocation information */
-+
-+ rpnt = (ELF_RELOC *)(intptr_t) (rel_addr + tpnt->loadaddr);
-+ rel_size = rel_size / sizeof(ELF_RELOC);
-+
-+ symtab = (Elf32_Sym *)(intptr_t) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for (i = 0; i < rel_size; i++, rpnt++) {
-+ int res;
-+
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+
-+ /* When the dynamic linker bootstrapped itself, it resolved some symbols.
-+ Make sure we do not do them again */
-+ if (!symtab_index && tpnt->libtype == program_interpreter)
-+ continue;
-+ if (symtab_index && tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ debug_sym(symtab,strtab,symtab_index);
-+ debug_reloc(symtab,strtab,rpnt);
-+#endif
-+
-+ res = reloc_fnc (tpnt, scope, rpnt, symtab, strtab);
-+
-+ if (res==0) continue;
-+
-+ _dl_dprintf(2, "\n%s: ",_dl_progname);
-+
-+ if (symtab_index)
-+ _dl_dprintf(2, "symbol '%s': ", strtab + symtab[symtab_index].st_name);
-+
-+ if (res <0)
-+ {
-+ int reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "can't handle reloc type %s\n ", _dl_reltypes(reloc_type));
-+#else
-+ _dl_dprintf(2, "can't handle reloc type %x\n", reloc_type);
-+#endif
-+ _dl_exit(-res);
-+ }
-+ else if (res >0)
-+ {
-+ _dl_dprintf(2, "can't resolve symbol\n");
-+ return res;
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+static int
-+_dl_do_reloc (struct elf_resolve *tpnt,struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ char *symname;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+
-+
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope,
-+ (reloc_type == R_SH_JMP_SLOT ? tpnt : NULL), symbolrel);
-+
-+ /*
-+ * We want to allow undefined references to weak symbols - this might
-+ * have been intentional. We should not be linking local symbols
-+ * here, so all bases should be covered.
-+ */
-+ if (!symbol_addr && ELF32_ST_BIND(symtab[symtab_index].st_info) == STB_GLOBAL) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "\tglobal symbol '%s' already defined in '%s'\n",
-+ symname, tpnt->libname);
-+#endif
-+ return 0;
-+ }
-+ }
-+
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_SH_NONE:
-+ break;
-+ case R_SH_COPY:
-+ /* handled later on */
-+ break;
-+ case R_SH_DIR32:
-+ case R_SH_GLOB_DAT:
-+ case R_SH_JMP_SLOT:
-+ *reloc_addr = symbol_addr + rpnt->r_addend;
-+ break;
-+ case R_SH_REL32:
-+ *reloc_addr = symbol_addr + rpnt->r_addend -
-+ (unsigned long) reloc_addr;
-+ break;
-+ case R_SH_RELATIVE:
-+ *reloc_addr = (unsigned long) tpnt->loadaddr + rpnt->r_addend;
-+ break;
-+ default:
-+ return -1; /*call _dl_exit(1) */
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+
-+ return 0;
-+}
-+
-+
-+static int
-+_dl_do_lazy_reloc (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ unsigned long *reloc_addr;
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ unsigned long old_val;
-+#endif
-+ (void)scope;
-+ (void)symtab;
-+ (void)strtab;
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ old_val = *reloc_addr;
-+#endif
-+ switch (reloc_type) {
-+ case R_SH_NONE:
-+ break;
-+ case R_SH_JMP_SLOT:
-+ *reloc_addr += (unsigned long) tpnt->loadaddr;
-+ break;
-+ default:
-+ return -1; /*call _dl_exit(1) */
-+ }
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_reloc && _dl_debug_detail)
-+ _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x", old_val, *reloc_addr, reloc_addr);
-+#endif
-+ return 0;
-+
-+}
-+
-+/* This is done as a separate step, because there are cases where
-+ information is first copied and later initialized. This results in
-+ the wrong information being copied. Someone at Sun was complaining about
-+ a bug in the handling of _COPY by SVr4, and this may in fact be what he
-+ was talking about. Sigh. */
-+
-+/* No, there are cases where the SVr4 linker fails to emit COPY relocs
-+ at all */
-+static int
-+_dl_do_copy (struct elf_resolve *tpnt, struct dyn_elf *scope,
-+ ELF_RELOC *rpnt, Elf32_Sym *symtab, char *strtab)
-+{
-+ int reloc_type;
-+ int symtab_index;
-+ unsigned long *reloc_addr;
-+ unsigned long symbol_addr;
-+ int goof = 0;
-+ char*symname;
-+
-+ reloc_addr = (unsigned long *)(intptr_t) (tpnt->loadaddr + (unsigned long) rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ if (reloc_type != R_SH_COPY)
-+ return 0;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ symname = strtab + symtab[symtab_index].st_name;
-+
-+ if (symtab_index) {
-+
-+ symbol_addr = (unsigned long) _dl_find_hash(symname, scope, NULL, copyrel);
-+ if (!symbol_addr) goof++;
-+ }
-+ if (!goof) {
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if(_dl_debug_move)
-+ _dl_dprintf(_dl_debug_file,"\n%s move %x bytes from %x to %x",
-+ symname, symtab[symtab_index].st_size,
-+ symbol_addr, symtab[symtab_index].st_value);
-+#endif
-+ _dl_memcpy((char *) symtab[symtab_index].st_value,
-+ (char *) symbol_addr, symtab[symtab_index].st_size);
-+ }
-+
-+ return goof;
-+}
-+
-+
-+void _dl_parse_lazy_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ (void)_dl_parse(tpnt, NULL, rel_addr, rel_size, _dl_do_lazy_reloc);
-+}
-+
-+int _dl_parse_relocation_information(struct elf_resolve *tpnt,
-+ unsigned long rel_addr, unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ return _dl_parse(tpnt, tpnt->symbol_scope, rel_addr, rel_size, _dl_do_reloc);
-+}
-+
-+int _dl_parse_copy_information(struct dyn_elf *xpnt, unsigned long rel_addr,
-+ unsigned long rel_size, int type)
-+{
-+ (void) type;
-+ return _dl_parse(xpnt->dyn, xpnt->next, rel_addr, rel_size, _dl_do_copy);
-+}
-+
-+
-diff -urN uClibc/ldso-0.9.24/ldso/sh/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/sh/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/sh/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sh/ld_syscalls.h 2002-08-09 07:20:19.000000000 -0500
-@@ -0,0 +1,7 @@
-+/* Define the __set_errno macro as nothing so that we don't bother
-+ * setting errno, which is important since we make system calls
-+ * before the errno symbol is dynamicly linked. */
-+
-+#define __set_errno(X) {(void)(X);}
-+#include "sys/syscall.h"
-+
-diff -urN uClibc/ldso-0.9.24/ldso/sh/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/sh/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/sh/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sh/ld_sysdep.h 2002-11-07 20:18:16.000000000 -0600
-@@ -0,0 +1,144 @@
-+/*
-+ * Various assmbly language/system dependent hacks that are required
-+ * so that we can minimize the amount of platform specific code.
-+ */
-+
-+/*
-+ * Define this if the system uses RELOCA.
-+ */
-+#define ELF_USES_RELOCA
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) ARGVP = ((unsigned long*) ARGS)
-+
-+/*
-+ * Initialization sequence for a GOT.
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+{ \
-+ GOT_BASE[2] = (unsigned long) _dl_linux_resolve; \
-+ GOT_BASE[1] = (unsigned long) (MODULE); \
-+}
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader. RELP is the relocation that we
-+ * are performing, REL is the pointer to the address we are relocating.
-+ * SYMBOL is the symbol involved in the relocation, and LOAD is the
-+ * load address.
-+ */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ switch(ELF32_R_TYPE((RELP)->r_info)){ \
-+ case R_SH_REL32: \
-+ *(REL) = (SYMBOL) + (RELP)->r_addend \
-+ - (unsigned long)(REL); \
-+ break; \
-+ case R_SH_DIR32: \
-+ case R_SH_GLOB_DAT: \
-+ case R_SH_JMP_SLOT: \
-+ *(REL) = (SYMBOL) + (RELP)->r_addend; \
-+ break; \
-+ case R_SH_RELATIVE: \
-+ *(REL) = (LOAD) + (RELP)->r_addend; \
-+ break; \
-+ case R_SH_NONE: \
-+ break; \
-+ default: \
-+ SEND_STDERR("BOOTSTRAP_RELOC: unhandled reloc type "); \
-+ SEND_NUMBER_STDERR(ELF32_R_TYPE((RELP)->r_info), 1); \
-+ SEND_STDERR("REL, SYMBOL, LOAD: "); \
-+ SEND_ADDRESS_STDERR(REL, 0); \
-+ SEND_STDERR(", "); \
-+ SEND_ADDRESS_STDERR(SYMBOL, 0); \
-+ SEND_STDERR(", "); \
-+ SEND_ADDRESS_STDERR(LOAD, 1); \
-+ _dl_exit(1); \
-+ }
-+
-+
-+/*
-+ * Transfer control to the user's application, once the dynamic loader
-+ * is done. This routine has to exit the current function, then
-+ * call the _dl_elf_main function.
-+ */
-+
-+#define START() return _dl_elf_main;
-+
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+
-+#define MAGIC1 EM_SH
-+#undef MAGIC2
-+/* Used for error messages */
-+#define ELF_TARGET "sh"
-+
-+struct elf_resolve;
-+extern unsigned long _dl_linux_resolver(struct elf_resolve * tpnt, int reloc_entry);
-+
-+static __inline__ unsigned int
-+_dl_urem(unsigned int n, unsigned int base)
-+{
-+ int res;
-+
-+ __asm__ (""\
-+ "mov #0, r0\n\t" \
-+ "div0u\n\t" \
-+ "" \
-+ "! get one bit from the msb of the numerator into the T\n\t" \
-+ "! bit and divide it by whats in %2. Put the answer bit\n\t" \
-+ "! into the T bit so it can come out again at the bottom\n\t" \
-+ "" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1 ; div1 %2, r0\n\t" \
-+ "rotcl %1\n\t"
-+ : "=r" (res)
-+ : "0" (n), "r" (base)
-+ : "r0","cc");
-+
-+ return n - (base * res);
-+}
-+
-+#define do_rem(result, n, base) ((result) = _dl_urem((n), (base)))
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/sh/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/sh/resolve.S
---- uClibc/ldso-0.9.24/ldso/sh/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sh/resolve.S 2002-11-07 20:18:16.000000000 -0600
-@@ -0,0 +1,91 @@
-+/*
-+ * Stolen from glibc-2.2.2 by Eddie C. Dost <ecd@atecom.com>
-+ */
-+
-+ .text
-+ .globl _dl_linux_resolver
-+ .globl _dl_linux_resolve
-+ .type _dl_linux_resolve, @function
-+ .balign 16
-+_dl_linux_resolve:
-+ mov.l r3, @-r15
-+ mov.l r4, @-r15
-+ mov.l r5, @-r15
-+ mov.l r6, @-r15
-+ mov.l r7, @-r15
-+ mov.l r12, @-r15
-+ movt r3 ! Save T flag
-+ mov.l r3, @-r15
-+
-+#ifdef HAVE_FPU
-+ sts.l fpscr, @-r15
-+ mov #8,r3
-+ swap.w r3, r3
-+ lds r3, fpscr
-+ fmov.s fr11, @-r15
-+ fmov.s fr10, @-r15
-+ fmov.s fr9, @-r15
-+ fmov.s fr8, @-r15
-+ fmov.s fr7, @-r15
-+ fmov.s fr6, @-r15
-+ fmov.s fr5, @-r15
-+ fmov.s fr4, @-r15
-+#endif
-+ sts.l pr, @-r15
-+/* Note - The PLT entries have been "optimised" not to use r2. r2 is used by
-+ GCC to return the address of large structures, so it should not be
-+ corrupted here. This does mean however, that those PLTs does not conform
-+ to the SH PIC ABI. That spec says that r0 contains the type of the PLT
-+ and r2 contains the GOT id. The GNU Plt version stores the GOT id in r0 and
-+ ignores the type. We can easily detect this difference however,
-+ since the type will always be 0 or 8, and the GOT ids will always be
-+ greater than or equal to 12.
-+
-+ Found in binutils/bfd/elf32-sh.c by Stefan Allius <allius@atecom.com>
-+ */
-+ mov #8 ,r5
-+ cmp/gt r5, r0
-+ bt 1f
-+ mov r2, r0 ! link map address in r2 (SH PIC ABI)
-+1:
-+ mov r0, r4 ! link map address in r0 (GNUs PLT)
-+ mova .LG, r0
-+ mov.l .LG, r5
-+ add r5, r0
-+ mov.l 3f, r5
-+ mov.l @(r0, r5),r5
-+ jsr @r5
-+ mov r1, r5 ! Reloc offset
-+
-+ lds.l @r15+, pr ! Get register content back
-+
-+#ifdef HAVE_FPU
-+ fmov.s @r15+, fr4
-+ fmov.s @r15+, fr5
-+ fmov.s @r15+, fr6
-+ fmov.s @r15+, fr7
-+ fmov.s @r15+, fr8
-+ fmov.s @r15+, fr9
-+ fmov.s @r15+, fr10
-+ fmov.s @r15+, fr11
-+ lds.l @r15+, fpscr
-+#endif
-+
-+ mov.l @r15+, r3
-+ shal r3 ! Load T flag
-+ mov.l @r15+, r12
-+ mov.l @r15+, r7
-+ mov.l @r15+, r6
-+ mov.l @r15+, r5
-+ mov.l @r15+, r4
-+ jmp @r0 ! Jump to function address
-+ mov.l @r15+, r3
-+
-+ .balign 4
-+
-+3:
-+ .long _dl_linux_resolver@GOT
-+.LG:
-+ .long _GLOBAL_OFFSET_TABLE_
-+ .size _dl_linux_resolve, . - _dl_linux_resolve
-+
-diff -urN uClibc/ldso-0.9.24/ldso/sparc/boot1_arch.h uClibc.ldso.24/ldso-0.9.24/ldso/sparc/boot1_arch.h
---- uClibc/ldso-0.9.24/ldso/sparc/boot1_arch.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sparc/boot1_arch.h 2002-08-08 09:35:49.000000000 -0500
-@@ -0,0 +1,7 @@
-+/* Any assmbly language/system dependent hacks needed to setup boot1.c so it
-+ * will work as expected and cope with whatever platform specific wierdness is
-+ * needed for this architecture. See arm/boot1_arch.h for an example of what
-+ * can be done.
-+ */
-+
-+#define LD_BOOT(X) void _dl_boot (X)
-diff -urN uClibc/ldso-0.9.24/ldso/sparc/elfinterp.c uClibc.ldso.24/ldso-0.9.24/ldso/sparc/elfinterp.c
---- uClibc/ldso-0.9.24/ldso/sparc/elfinterp.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sparc/elfinterp.c 2002-11-05 12:21:12.000000000 -0600
-@@ -0,0 +1,357 @@
-+/* vi: set sw=4 ts=4: */
-+/* sparc ELF shared library loader suppport
-+ *
-+ * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald,
-+ * David Engel, Hongjiu Lu and Mitch D'Souza
-+ *
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. The name of the above contributors may not be
-+ * used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ */
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+static const char * _dl_reltypes[] = { "R_SPARC_NONE", "R_SPARC_8",
-+ "R_SPARC_16", "R_SPARC_32", "R_SPARC_DISP8", "R_SPARC_DISP16",
-+ "R_SPARC_DISP32", "R_SPARC_WDISP30", "R_SPARC_WDISP22",
-+ "R_SPARC_HI22", "R_SPARC_22", "R_SPARC_13", "R_SPARC_LO10",
-+ "R_SPARC_GOT10", "R_SPARC_GOT13", "R_SPARC_GOT22", "R_SPARC_PC10",
-+ "R_SPARC_PC22", "R_SPARC_WPLT30", "R_SPARC_COPY",
-+ "R_SPARC_GLOB_DAT", "R_SPARC_JMP_SLOT", "R_SPARC_RELATIVE",
-+ "R_SPARC_UA32"};
-+#endif
-+
-+/* Program to load an ELF binary on a linux system, and run it.
-+References to symbols in sharable libraries can be resolved by either
-+an ELF sharable library or a linux style of shared library. */
-+
-+/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have
-+ I ever taken any courses on internals. This program was developed using
-+ information available through the book "UNIX SYSTEM V RELEASE 4,
-+ Programmers guide: Ansi C and Programming Support Tools", which did
-+ a more than adequate job of explaining everything required to get this
-+ working. */
-+
-+extern _dl_linux_resolve(void);
-+
-+unsigned int _dl_linux_resolver(unsigned int reloc_entry, unsigned int * plt)
-+{
-+ int reloc_type;
-+ Elf32_Rela * this_reloc;
-+ char * strtab;
-+ Elf32_Sym * symtab;
-+ Elf32_Rela * rel_addr;
-+ struct elf_resolve * tpnt;
-+ int symtab_index;
-+ char * new_addr;
-+ char ** got_addr;
-+ unsigned int instr_addr;
-+ tpnt = (struct elf_resolve *) plt[2];
-+
-+ rel_addr = (Elf32_Rela *) (tpnt->dynamic_info[DT_JMPREL] +
-+ tpnt->loadaddr);
-+
-+ /*
-+ * Generate the correct relocation index into the .rela.plt section.
-+ */
-+ reloc_entry = (reloc_entry >> 12) - 0xc;
-+
-+ this_reloc = (Elf32_Rela *) ((char *) rel_addr + reloc_entry);
-+
-+ reloc_type = ELF32_R_TYPE(this_reloc->r_info);
-+ symtab_index = ELF32_R_SYM(this_reloc->r_info);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = (char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ _dl_dprintf(2, "tpnt = %x\n", tpnt);
-+ _dl_dprintf(2, "reloc = %x\n", this_reloc);
-+ _dl_dprintf(2, "symtab = %x\n", symtab);
-+ _dl_dprintf(2, "strtab = %x\n", strtab);
-+
-+
-+ if (reloc_type != R_SPARC_JMP_SLOT) {
-+ _dl_dprintf(2, "%s: incorrect relocation type in jump relocations (%d)\n",
-+ _dl_progname, reloc_type);
-+ _dl_exit(30);
-+ };
-+
-+ /* Address of jump instruction to fix up */
-+ instr_addr = ((int)this_reloc->r_offset + (int)tpnt->loadaddr);
-+ got_addr = (char **) instr_addr;
-+
-+ _dl_dprintf(2, "symtab_index %d\n", symtab_index);
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if (_dl_debug_symbols) {
-+ _dl_dprintf(2, "Resolving symbol %s\n",
-+ strtab + symtab[symtab_index].st_name);
-+ }
-+#endif
-+
-+ /* Get the address of the GOT entry */
-+ new_addr = _dl_find_hash(strtab + symtab[symtab_index].st_name,
-+ tpnt->symbol_scope, tpnt, resolver);
-+ if(!new_addr) {
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ _dl_exit(31);
-+ };
-+
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ if ((unsigned long) got_addr < 0x40000000)
-+ {
-+ if (_dl_debug_bindings)
-+ {
-+ _dl_dprintf(_dl_debug_file, "\nresolve function: %s",
-+ strtab + symtab[symtab_index].st_name);
-+ if(_dl_debug_detail) _dl_dprintf(_dl_debug_file,
-+ "\tpatch %x ==> %x @ %x", *got_addr, new_addr, got_addr);
-+ }
-+ }
-+ if (!_dl_debug_nofixups) {
-+ got_addr[1] = (char *) (0x03000000 | (((unsigned int) new_addr >> 10) & 0x3fffff));
-+ got_addr[2] = (char *) (0x81c06000 | ((unsigned int) new_addr & 0x3ff));
-+ }
-+#else
-+ got_addr[1] = (char *) (0x03000000 | (((unsigned int) new_addr >> 10) & 0x3fffff));
-+ got_addr[2] = (char *) (0x81c06000 | ((unsigned int) new_addr & 0x3ff));
-+#endif
-+
-+ _dl_dprintf(2, "Address = %x\n",new_addr);
-+ _dl_exit(32);
-+
-+ return (unsigned int) new_addr;
-+}
-+
-+void _dl_parse_lazy_relocation_information(struct elf_resolve * tpnt, int rel_addr,
-+ int rel_size, int type){
-+ int i;
-+ char * strtab;
-+ int reloc_type;
-+ int symtab_index;
-+ Elf32_Sym * symtab;
-+ Elf32_Rela * rpnt;
-+ unsigned int * reloc_addr;
-+
-+ /* Now parse the relocation information */
-+ rpnt = (Elf32_Rela *) (rel_addr + tpnt->loadaddr);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = ( char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for(i=0; i< rel_size; i += sizeof(Elf32_Rela), rpnt++){
-+ reloc_addr = (int *) (tpnt->loadaddr + (int)rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+
-+ /* When the dynamic linker bootstrapped itself, it resolved some symbols.
-+ Make sure we do not do them again */
-+ if(!symtab_index && tpnt->libtype == program_interpreter) continue;
-+ if(symtab_index && tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+ switch(reloc_type){
-+ case R_SPARC_NONE:
-+ break;
-+ case R_SPARC_JMP_SLOT:
-+ break;
-+ default:
-+ _dl_dprintf(2, "%s: (LAZY) can't handle reloc type ", _dl_progname);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "%s ", _dl_reltypes[reloc_type]);
-+#endif
-+ if(symtab_index) _dl_dprintf(2, "'%s'\n",
-+ strtab + symtab[symtab_index].st_name);
-+ _dl_exit(33);
-+ };
-+ };
-+}
-+
-+int _dl_parse_relocation_information(struct elf_resolve * tpnt, int rel_addr,
-+ int rel_size, int type){
-+ int i;
-+ char * strtab;
-+ int reloc_type;
-+ int goof = 0;
-+ Elf32_Sym * symtab;
-+ Elf32_Rela * rpnt;
-+ unsigned int * reloc_addr;
-+ unsigned int symbol_addr;
-+ int symtab_index;
-+ /* Now parse the relocation information */
-+
-+ rpnt = (Elf32_Rela *) (rel_addr + tpnt->loadaddr);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = ( char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for(i=0; i< rel_size; i+= sizeof(Elf32_Rela), rpnt++){
-+ reloc_addr = (int *) (tpnt->loadaddr + (int)rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+
-+ if(!symtab_index && tpnt->libtype == program_interpreter) continue;
-+
-+ if(symtab_index) {
-+
-+ if(tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+ symbol_addr = (unsigned int)
-+ _dl_find_hash(strtab + symtab[symtab_index].st_name,
-+ tpnt->symbol_scope,
-+ (reloc_type == R_SPARC_JMP_SLOT ? tpnt : NULL), symbolrel);
-+
-+ if(!symbol_addr &&
-+ ELF32_ST_BIND(symtab [symtab_index].st_info) == STB_GLOBAL) {
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ goof++;
-+ };
-+ };
-+ switch(reloc_type){
-+ case R_SPARC_NONE:
-+ break;
-+ case R_SPARC_32:
-+ *reloc_addr = symbol_addr + rpnt->r_addend;
-+ break;
-+ case R_SPARC_DISP32:
-+ *reloc_addr = symbol_addr + rpnt->r_addend - (unsigned int) reloc_addr;
-+ break;
-+ case R_SPARC_GLOB_DAT:
-+ *reloc_addr = symbol_addr + rpnt->r_addend;
-+ break;
-+ case R_SPARC_JMP_SLOT:
-+ reloc_addr[1] = 0x03000000 | ((symbol_addr >> 10) & 0x3fffff);
-+ reloc_addr[2] = 0x81c06000 | (symbol_addr & 0x3ff);
-+ break;
-+ case R_SPARC_RELATIVE:
-+ *reloc_addr += (unsigned int) tpnt->loadaddr + rpnt->r_addend;
-+ break;
-+ case R_SPARC_HI22:
-+ if (!symbol_addr)
-+ symbol_addr = tpnt->loadaddr + rpnt->r_addend;
-+ else
-+ symbol_addr += rpnt->r_addend;
-+ *reloc_addr = (*reloc_addr & 0xffc00000)|(symbol_addr >> 10);
-+ break;
-+ case R_SPARC_LO10:
-+ if (!symbol_addr)
-+ symbol_addr = tpnt->loadaddr + rpnt->r_addend;
-+ else
-+ symbol_addr += rpnt->r_addend;
-+ *reloc_addr = (*reloc_addr & ~0x3ff)|(symbol_addr & 0x3ff);
-+ break;
-+ case R_SPARC_WDISP30:
-+ *reloc_addr = (*reloc_addr & 0xc0000000)|
-+ ((symbol_addr - (unsigned int) reloc_addr) >> 2);
-+ break;
-+ case R_SPARC_COPY:
-+#if 0 /* This one is done later */
-+ _dl_dprintf(2, "Doing copy for symbol ");
-+ if(symtab_index) _dl_dprintf(2, strtab + symtab[symtab_index].st_name);
-+ _dl_dprintf(2, "\n");
-+ _dl_memcpy((void *) symtab[symtab_index].st_value,
-+ (void *) symbol_addr,
-+ symtab[symtab_index].st_size);
-+#endif
-+ break;
-+ default:
-+ _dl_dprintf(2, "%s: can't handle reloc type ", _dl_progname);
-+#if defined (__SUPPORT_LD_DEBUG__)
-+ _dl_dprintf(2, "%s ", _dl_reltypes[reloc_type]);
-+#endif
-+ if (symtab_index)
-+ _dl_dprintf(2, "'%s'\n", strtab + symtab[symtab_index].st_name);
-+ _dl_exit(34);
-+ };
-+
-+ };
-+ return goof;
-+}
-+
-+
-+/* This is done as a separate step, because there are cases where
-+ information is first copied and later initialized. This results in
-+ the wrong information being copied. Someone at Sun was complaining about
-+ a bug in the handling of _COPY by SVr4, and this may in fact be what he
-+ was talking about. Sigh. */
-+
-+/* No, there are cases where the SVr4 linker fails to emit COPY relocs
-+ at all */
-+
-+int _dl_parse_copy_information(struct dyn_elf * xpnt, int rel_addr,
-+ int rel_size, int type)
-+{
-+ int i;
-+ char * strtab;
-+ int reloc_type;
-+ int goof = 0;
-+ Elf32_Sym * symtab;
-+ Elf32_Rela * rpnt;
-+ unsigned int * reloc_addr;
-+ unsigned int symbol_addr;
-+ struct elf_resolve *tpnt;
-+ int symtab_index;
-+ /* Now parse the relocation information */
-+
-+ tpnt = xpnt->dyn;
-+
-+ rpnt = (Elf32_Rela *) (rel_addr + tpnt->loadaddr);
-+
-+ symtab = (Elf32_Sym *) (tpnt->dynamic_info[DT_SYMTAB] + tpnt->loadaddr);
-+ strtab = ( char *) (tpnt->dynamic_info[DT_STRTAB] + tpnt->loadaddr);
-+
-+ for(i=0; i< rel_size; i+= sizeof(Elf32_Rela), rpnt++){
-+ reloc_addr = (int *) (tpnt->loadaddr + (int)rpnt->r_offset);
-+ reloc_type = ELF32_R_TYPE(rpnt->r_info);
-+ if(reloc_type != R_SPARC_COPY) continue;
-+ symtab_index = ELF32_R_SYM(rpnt->r_info);
-+ symbol_addr = 0;
-+ if(!symtab_index && tpnt->libtype == program_interpreter) continue;
-+ if(symtab_index) {
-+
-+ if(tpnt->libtype == program_interpreter &&
-+ _dl_symbol(strtab + symtab[symtab_index].st_name))
-+ continue;
-+
-+ symbol_addr = (unsigned int)
-+ _dl_find_hash(strtab + symtab[symtab_index].st_name,
-+ xpnt->next, NULL, copyrel);
-+ if(!symbol_addr) {
-+ _dl_dprintf(2, "%s: can't resolve symbol '%s'\n",
-+ _dl_progname, strtab + symtab[symtab_index].st_name);
-+ goof++;
-+ };
-+ };
-+ if (!goof)
-+ _dl_memcpy((char *) symtab[symtab_index].st_value,
-+ (char *) symbol_addr,
-+ symtab[symtab_index].st_size);
-+ };
-+ return goof;
-+}
-+
-+
-diff -urN uClibc/ldso-0.9.24/ldso/sparc/ld_syscalls.h uClibc.ldso.24/ldso-0.9.24/ldso/sparc/ld_syscalls.h
---- uClibc/ldso-0.9.24/ldso/sparc/ld_syscalls.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sparc/ld_syscalls.h 2002-03-19 04:43:35.000000000 -0600
-@@ -0,0 +1,155 @@
-+/*
-+ * This file contains the system call macros and syscall
-+ * numbers used by the shared library loader.
-+ */
-+
-+#define __NR_exit 1
-+#define __NR_read 3
-+#define __NR_write 4
-+#define __NR_open 5
-+#define __NR_close 6
-+#define __NR_getuid 24
-+#define __NR_getgid 47
-+#define __NR_geteuid 49
-+#define __NR_getegid 50
-+#define __NR_readlink 58
-+#define __NR_mmap 71
-+#define __NR_munmap 73
-+#define __NR_stat 38
-+#define __NR_mprotect 74
-+
-+/* Here are the macros which define how this platform makes
-+ * system calls. This particular variant does _not_ set
-+ * errno (note how it is disabled in __syscall_return) since
-+ * these will get called before the errno symbol is dynamicly
-+ * linked. */
-+
-+#define _syscall0(type,name) \
-+type name(void) \
-+{ \
-+long __res; \
-+register long __g1 __asm__ ("g1") = __NR_##name; \
-+__asm__ __volatile__ ("t 0x10\n\t" \
-+ "bcc 1f\n\t" \
-+ "mov %%o0, %0\n\t" \
-+ "sub %%g0, %%o0, %0\n\t" \
-+ "1:\n\t" \
-+ : "=r" (__res)\
-+ : "r" (__g1) \
-+ : "o0", "cc"); \
-+if (__res < -255 || __res >= 0) \
-+ return (type) __res; \
-+/*errno = -__res; */\
-+return -1; \
-+}
-+
-+#define _syscall1(type,name,type1,arg1) \
-+type name(type1 arg1) \
-+{ \
-+long __res; \
-+register long __g1 __asm__ ("g1") = __NR_##name; \
-+register long __o0 __asm__ ("o0") = (long)(arg1); \
-+__asm__ __volatile__ ("t 0x10\n\t" \
-+ "bcc 1f\n\t" \
-+ "mov %%o0, %0\n\t" \
-+ "sub %%g0, %%o0, %0\n\t" \
-+ "1:\n\t" \
-+ : "=r" (__res), "=&r" (__o0) \
-+ : "1" (__o0), "r" (__g1) \
-+ : "cc"); \
-+if (__res < -255 || __res >= 0) \
-+ return (type) __res; \
-+/*errno = -__res;*/ \
-+return -1; \
-+}
-+
-+#define _syscall2(type,name,type1,arg1,type2,arg2) \
-+type name(type1 arg1,type2 arg2) \
-+{ \
-+long __res; \
-+register long __g1 __asm__ ("g1") = __NR_##name; \
-+register long __o0 __asm__ ("o0") = (long)(arg1); \
-+register long __o1 __asm__ ("o1") = (long)(arg2); \
-+__asm__ __volatile__ ("t 0x10\n\t" \
-+ "bcc 1f\n\t" \
-+ "mov %%o0, %0\n\t" \
-+ "sub %%g0, %%o0, %0\n\t" \
-+ "1:\n\t" \
-+ : "=r" (__res), "=&r" (__o0) \
-+ : "1" (__o0), "r" (__o1), "r" (__g1) \
-+ : "cc"); \
-+if (__res < -255 || __res >= 0) \
-+ return (type) __res; \
-+/*errno = -__res;*/ \
-+return -1; \
-+}
-+
-+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
-+type name(type1 arg1,type2 arg2,type3 arg3) \
-+{ \
-+long __res; \
-+register long __g1 __asm__ ("g1") = __NR_##name; \
-+register long __o0 __asm__ ("o0") = (long)(arg1); \
-+register long __o1 __asm__ ("o1") = (long)(arg2); \
-+register long __o2 __asm__ ("o2") = (long)(arg3); \
-+__asm__ __volatile__ ("t 0x10\n\t" \
-+ "bcc 1f\n\t" \
-+ "mov %%o0, %0\n\t" \
-+ "sub %%g0, %%o0, %0\n\t" \
-+ "1:\n\t" \
-+ : "=r" (__res), "=&r" (__o0) \
-+ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
-+ : "cc"); \
-+if (__res < -255 || __res>=0) \
-+ return (type) __res; \
-+/*errno = -__res;*/ \
-+return -1; \
-+}
-+
-+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
-+type name (type1 arg1, type2 arg2, type3 arg3, type4 arg4) \
-+{ \
-+long __res; \
-+register long __g1 __asm__ ("g1") = __NR_##name; \
-+register long __o0 __asm__ ("o0") = (long)(arg1); \
-+register long __o1 __asm__ ("o1") = (long)(arg2); \
-+register long __o2 __asm__ ("o2") = (long)(arg3); \
-+register long __o3 __asm__ ("o3") = (long)(arg4); \
-+__asm__ __volatile__ ("t 0x10\n\t" \
-+ "bcc 1f\n\t" \
-+ "mov %%o0, %0\n\t" \
-+ "sub %%g0, %%o0, %0\n\t" \
-+ "1:\n\t" \
-+ : "=r" (__res), "=&r" (__o0) \
-+ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
-+ : "cc"); \
-+if (__res < -255 || __res>=0) \
-+ return (type) __res; \
-+/*errno = -__res;*/ \
-+return -1; \
-+}
-+
-+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
-+ type5,arg5) \
-+type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
-+{ \
-+long __res; \
-+register long __g1 __asm__ ("g1") = __NR_##name; \
-+register long __o0 __asm__ ("o0") = (long)(arg1); \
-+register long __o1 __asm__ ("o1") = (long)(arg2); \
-+register long __o2 __asm__ ("o2") = (long)(arg3); \
-+register long __o3 __asm__ ("o3") = (long)(arg4); \
-+register long __o4 __asm__ ("o4") = (long)(arg5); \
-+__asm__ __volatile__ ("t 0x10\n\t" \
-+ "bcc 1f\n\t" \
-+ "mov %%o0, %0\n\t" \
-+ "sub %%g0, %%o0, %0\n\t" \
-+ "1:\n\t" \
-+ : "=r" (__res), "=&r" (__o0) \
-+ : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
-+ : "cc"); \
-+if (__res < -255 || __res>=0) \
-+ return (type) __res; \
-+/*errno = -__res; */\
-+return -1; \
-+}
-diff -urN uClibc/ldso-0.9.24/ldso/sparc/ld_sysdep.h uClibc.ldso.24/ldso-0.9.24/ldso/sparc/ld_sysdep.h
---- uClibc/ldso-0.9.24/ldso/sparc/ld_sysdep.h 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sparc/ld_sysdep.h 2002-08-09 08:05:29.000000000 -0500
-@@ -0,0 +1,112 @@
-+
-+/*
-+ * Various assmbly language/system dependent hacks that are required
-+ * so that we can minimize the amount of platform specific code.
-+ */
-+#define LINUXBIN
-+
-+/*
-+ * Define this if the system uses RELOCA.
-+ */
-+#define ELF_USES_RELOCA
-+
-+/*
-+ * Get a pointer to the argv array. On many platforms this can be just
-+ * the address if the first argument, on other platforms we need to
-+ * do something a little more subtle here. We assume that argc is stored
-+ * at the word just below the argvp that we return here.
-+ */
-+#define GET_ARGV(ARGVP, ARGS) __asm__("\tadd %%fp,68,%0\n" : "=r" (ARGVP));
-+
-+/*
-+ * Initialization sequence for a GOT. For the Sparc, this points to the
-+ * PLT, and we need to initialize a couple of the slots. The PLT should
-+ * look like:
-+ *
-+ * save %sp, -64, %sp
-+ * call _dl_linux_resolve
-+ * nop
-+ * .word implementation_dependent
-+ */
-+#define INIT_GOT(GOT_BASE,MODULE) \
-+{ \
-+ GOT_BASE[0] = 0x9de3bfc0; /* save %sp, -64, %sp */ \
-+ GOT_BASE[1] = 0x40000000 | (((unsigned int) _dl_linux_resolve - (unsigned int) GOT_BASE - 4) >> 2); \
-+ GOT_BASE[2] = 0x01000000; /* nop */ \
-+ GOT_BASE[3] = (int) MODULE; \
-+}
-+
-+/*
-+ * Here is a macro to perform a relocation. This is only used when
-+ * bootstrapping the dynamic loader.
-+ */
-+#define PERFORM_BOOTSTRAP_RELOC(RELP,REL,SYMBOL,LOAD) \
-+ switch(ELF32_R_TYPE((RELP)->r_info)) { \
-+ case R_SPARC_32: \
-+ *REL = SYMBOL + (RELP)->r_addend; \
-+ break; \
-+ case R_SPARC_GLOB_DAT: \
-+ *REL = SYMBOL + (RELP)->r_addend; \
-+ break; \
-+ case R_SPARC_JMP_SLOT: \
-+ REL[1] = 0x03000000 | ((SYMBOL >> 10) & 0x3fffff); \
-+ REL[2] = 0x81c06000 | (SYMBOL & 0x3ff); \
-+ break; \
-+ case R_SPARC_NONE: \
-+ break; \
-+ case R_SPARC_WDISP30: \
-+ break; \
-+ case R_SPARC_RELATIVE: \
-+ *REL += (unsigned int) LOAD + (RELP)->r_addend; \
-+ break; \
-+ default: \
-+ _dl_exit(1); \
-+ }
-+
-+
-+/*
-+ * Transfer control to the user's application, once the dynamic loader
-+ * is done. The crt calls atexit with $g1 if not null, so we need to
-+ * ensure that it contains NULL.
-+ */
-+
-+#define START() \
-+ __asm__ volatile ( \
-+ "add %%g0,%%g0,%%g1\n\t" \
-+ "jmpl %0, %%o7\n\t" \
-+ "restore %%g0,%%g0,%%g0\n\t" \
-+ : /*"=r" (status) */ : \
-+ "r" (_dl_elf_main): "g1", "o0", "o1")
-+
-+
-+
-+/* Here we define the magic numbers that this dynamic loader should accept */
-+
-+#define MAGIC1 EM_SPARC
-+#undef MAGIC2
-+/* Used for error messages */
-+#define ELF_TARGET "Sparc"
-+
-+#ifndef COMPILE_ASM
-+extern unsigned int _dl_linux_resolver(unsigned int reloc_entry,
-+ unsigned int * i);
-+#endif
-+
-+/*
-+ * Define this if you want a dynamic loader that works on Solaris.
-+ */
-+#define SOLARIS_COMPATIBLE
-+
-+#define do_rem(result, n, base) result = (n % base)
-+
-+/*
-+ * dbx wants the binder to have a specific name. Mustn't disappoint it.
-+ */
-+#ifdef SOLARIS_COMPATIBLE
-+#define _dl_linux_resolve _elf_rtbndr
-+#endif
-+
-+/* 4096 bytes alignment */
-+#define PAGE_ALIGN 0xfffff000
-+#define ADDR_ALIGN 0xfff
-+#define OFFS_ALIGN 0x7ffff000
-diff -urN uClibc/ldso-0.9.24/ldso/sparc/resolve.S uClibc.ldso.24/ldso-0.9.24/ldso/sparc/resolve.S
---- uClibc/ldso-0.9.24/ldso/sparc/resolve.S 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/ldso/sparc/resolve.S 2002-01-11 13:57:41.000000000 -0600
-@@ -0,0 +1,25 @@
-+/*
-+ * These are various helper routines that are needed to run an ELF image.
-+ */
-+#define COMPILE_ASM
-+#include "ld_sysdep.h"
-+
-+.text
-+ .align 16
-+
-+.globl _dl_linux_resolve
-+_dl_linux_resolve:
-+ /*
-+ * Call the resolver - pass the address of the PLT so that we can
-+ * figure out which module we are in.
-+ */
-+ mov %o7,%o1
-+ call _dl_linux_resolver
-+ mov %g1,%o0
-+
-+ jmpl %o0,%o7
-+ restore
-+.LFE2:
-+
-+ .type _dl_linux_resolve,#function
-+ .size _dl_linux_resolve,.LFE2-_dl_linux_resolve
-diff -urN uClibc/ldso-0.9.24/libdl/.cvsignore uClibc.ldso.24/ldso-0.9.24/libdl/.cvsignore
---- uClibc/ldso-0.9.24/libdl/.cvsignore 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/libdl/.cvsignore 2001-04-26 11:12:47.000000000 -0500
-@@ -0,0 +1,2 @@
-+libdl.so*
-+
-diff -urN uClibc/ldso-0.9.24/libdl/Makefile uClibc.ldso.24/ldso-0.9.24/libdl/Makefile
---- uClibc/ldso-0.9.24/libdl/Makefile 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/libdl/Makefile 2004-03-01 03:05:53.000000000 -0600
-@@ -0,0 +1,86 @@
-+# Makefile for uClibc
-+#
-+# Copyright (C) 2000 by Lineo, inc.
-+# Copyright (C) 2000-2002 Erik Andersen <andersen@uclibc.org>
-+#
-+# This program is free software; you can redistribute it and/or modify it under
-+# the terms of the GNU Library General Public License as published by the Free
-+# Software Foundation; either version 2 of the License, or (at your option) any
-+# later version.
-+#
-+# This program is distributed in the hope that it will be useful, but WITHOUT
-+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-+# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-+# details.
-+#
-+# You should have received a copy of the GNU Library General Public License
-+# along with this program; if not, write to the Free Software Foundation, Inc.,
-+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+
-+
-+TOPDIR=../../
-+include $(TOPDIR)Rules.mak
-+
-+XXFLAGS=$(XWARNINGS) $(OPTIMIZATION) $(XARCH_CFLAGS) $(CPU_CFLAGS) \
-+ -DUCLIBC_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
-+ -fno-builtin -nostdinc -D_LIBC -I$(TOPDIR)ldso-0.9.24/include -I. -I$(TOPDIR)include
-+
-+ifeq ($(DODEBUG),y)
-+XXFLAGS=$(XWARNINGS) -O0 -g3 $(XARCH_CFLAGS) $(CPU_CFLAGS) \
-+ -DUCLIBC_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
-+ -fno-builtin -nostdinc -D_LIBC -I$(TOPDIR)ldso-0.9.24/include -I. -I$(TOPDIR)include
-+endif
-+
-+XXFLAGS+=$(shell $(CC) -print-search-dirs | sed -ne "s/install: *\(.*\)/-I\1include/gp")
-+XXFLAGS_NOPIC:=$(XXFLAGS)
-+ifeq ($(DOPIC),y)
-+ XXFLAGS += $(PICFLAG) -D__LIBDL_SHARED__
-+endif
-+ifeq ($(strip $(SUPPORT_LD_DEBUG)),y)
-+XXFLAGS+=-D__SUPPORT_LD_DEBUG__
-+endif
-+
-+LIBDL=libdl.a
-+LIBDL_PIC=libdl_pic.a
-+LIBDL_SHARED=libdl.so
-+LIBDL_SHARED_FULLNAME=libdl-$(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL).so
-+
-+CSRC=dlib.c
-+OBJS=dlib.o
-+PIC_OBJS=dlib_pic.o
-+
-+all: $(OBJS) $(LIBDL) shared
-+
-+$(LIBDL): ar-target
-+
-+ar-target: $(OBJS) $(PIC_OBJS)
-+ $(AR) $(ARFLAGS) $(LIBDL) ../ldso/$(TARGET_ARCH)/resolve.o $(OBJS)
-+ $(AR) $(ARFLAGS) $(LIBDL_PIC) $(PIC_OBJS)
-+ $(INSTALL) -d $(TOPDIR)lib
-+ $(RM) $(TOPDIR)lib/$(LIBDL)
-+ $(INSTALL) -m 644 $(LIBDL) $(TOPDIR)lib
-+
-+
-+dlib.o: dlib.c
-+ $(CC) $(XXFLAGS_NOPIC) -c dlib.c -o dlib.o
-+ $(STRIPTOOL) -x -R .note -R .comment $*.o
-+
-+dlib_pic.o: dlib.c
-+ $(CC) $(XXFLAGS) -c dlib.c -o dlib_pic.o
-+ $(STRIPTOOL) -x -R .note -R .comment $*.o
-+
-+$(OBJ): Makefile
-+
-+shared:
-+ $(LD) $(LDFLAGS) -soname=$(LIBDL_SHARED).$(MAJOR_VERSION) \
-+ -o $(LIBDL_SHARED_FULLNAME) --whole-archive $(LIBDL_PIC) \
-+ --no-whole-archive $(TOPDIR)/libc/misc/internals/interp.o \
-+ -L$(TOPDIR)/lib -lc $(LDADD_LIBFLOAT) $(LIBGCC);
-+ $(INSTALL) -d $(TOPDIR)lib
-+ $(RM) $(TOPDIR)lib/$(LIBDL_SHARED_FULLNAME) $(TOPDIR)lib/$(LIBDL_SHARED).$(MAJOR_VERSION)
-+ $(INSTALL) -m 644 $(LIBDL_SHARED_FULLNAME) $(TOPDIR)lib
-+ $(LN) -sf $(LIBDL_SHARED_FULLNAME) $(TOPDIR)lib/$(LIBDL_SHARED)
-+ $(LN) -sf $(LIBDL_SHARED_FULLNAME) $(TOPDIR)lib/$(LIBDL_SHARED).$(MAJOR_VERSION)
-+
-+clean:
-+ $(RM) .depend $(LIBDL_SHARED)* $(LIBDL_SHARED_FULLNAME) core *.o *.a *.s *.i tmp_make foo *~
-diff -urN uClibc/ldso-0.9.24/libdl/dlib.c uClibc.ldso.24/ldso-0.9.24/libdl/dlib.c
---- uClibc/ldso-0.9.24/libdl/dlib.c 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/libdl/dlib.c 2004-03-01 03:04:42.000000000 -0600
-@@ -0,0 +1,664 @@
-+/*
-+ * libdl.c
-+ *
-+ * Functions required for dlopen et. al.
-+ */
-+
-+#include <ldso.h>
-+
-+
-+/* The public interfaces */
-+void *dlopen(const char *, int) __attribute__ ((__weak__, __alias__ ("_dlopen")));
-+int dlclose(void *) __attribute__ ((__weak__, __alias__ ("_dlclose")));
-+void *dlsym(void *, const char *) __attribute__ ((__weak__, __alias__ ("_dlsym")));
-+const char *dlerror(void) __attribute__ ((__weak__, __alias__ ("_dlerror")));
-+int dladdr(void *, Dl_info *) __attribute__ ((__weak__, __alias__ ("_dladdr")));
-+void _dlinfo(void);
-+
-+
-+#ifdef __LIBDL_SHARED__
-+/* This is a real hack. We need access to the dynamic linker, but we
-+also need to make it possible to link against this library without any
-+unresolved externals. We provide these weak symbols to make the link
-+possible, but at run time the normal symbols are accessed. */
-+static void __attribute__ ((unused)) foobar(void)
-+{
-+ const char msg[]="libdl library not correctly linked\n";
-+ _dl_write(2, msg, _dl_strlen(msg));
-+ _dl_exit(1);
-+}
-+
-+static int __attribute__ ((unused)) foobar1 = (int) foobar; /* Use as pointer */
-+extern void _dl_dprintf(int, const char *, ...) __attribute__ ((__weak__, __alias__ ("foobar")));
-+extern char *_dl_find_hash(const char *, struct dyn_elf *, struct elf_resolve *, enum caller_type)
-+ __attribute__ ((__weak__, __alias__ ("foobar")));
-+extern struct elf_resolve * _dl_load_shared_library(int, struct dyn_elf **, struct elf_resolve *, char *)
-+ __attribute__ ((__weak__, __alias__ ("foobar")));
-+extern struct elf_resolve * _dl_check_if_named_library_is_loaded(const char *full_libname)
-+ __attribute__ ((__weak__, __alias__ ("foobar")));
-+extern int _dl_fixup(struct elf_resolve *tpnt, int lazy)
-+ __attribute__ ((__weak__, __alias__ ("foobar")));
-+extern int _dl_copy_fixups(struct dyn_elf * tpnt)
-+ __attribute__ ((__weak__, __alias__ ("foobar")));
-+#ifdef __mips__
-+extern void _dl_perform_mips_global_got_relocations(struct elf_resolve *tpnt)
-+ __attribute__ ((__weak__, __alias__ ("foobar")));
-+#endif
-+#ifdef USE_CACHE
-+int _dl_map_cache(void) __attribute__ ((__weak__, __alias__ ("foobar")));
-+int _dl_unmap_cache(void) __attribute__ ((__weak__, __alias__ ("foobar")));
-+#endif
-+
-+extern struct dyn_elf *_dl_symbol_tables __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern struct dyn_elf *_dl_handles __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern struct elf_resolve *_dl_loaded_modules __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern struct r_debug *_dl_debug_addr __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern unsigned long _dl_error_number __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern void *(*_dl_malloc_function)(size_t) __attribute__ ((__weak__, __alias__ ("foobar1")));
-+#ifdef __SUPPORT_LD_DEBUG__
-+extern char *_dl_debug __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern char *_dl_debug_symbols __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern char *_dl_debug_move __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern char *_dl_debug_reloc __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern char *_dl_debug_detail __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern char *_dl_debug_nofixups __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern char *_dl_debug_bindings __attribute__ ((__weak__, __alias__ ("foobar1")));
-+extern int _dl_debug_file __attribute__ ((__weak__, __alias__ ("foobar1")));
-+#endif
-+
-+#else /* __LIBDL_SHARED__ */
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+char *_dl_debug = 0;
-+char *_dl_debug_symbols = 0;
-+char *_dl_debug_move = 0;
-+char *_dl_debug_reloc = 0;
-+char *_dl_debug_detail = 0;
-+char *_dl_debug_nofixups = 0;
-+char *_dl_debug_bindings = 0;
-+int _dl_debug_file = 2;
-+#endif
-+char *_dl_library_path = 0;
-+char *_dl_ldsopath = 0;
-+struct r_debug *_dl_debug_addr = NULL;
-+static char *_dl_malloc_addr, *_dl_mmap_zero;
-+#include "../ldso/_dl_progname.h" /* Pull in the name of ld.so */
-+#include "../ldso/hash.c"
-+#define _dl_trace_loaded_objects 0
-+#include "../ldso/readelflib1.c"
-+void *(*_dl_malloc_function) (size_t size);
-+int _dl_fixup(struct elf_resolve *tpnt, int lazy);
-+#endif
-+
-+static int do_dlclose(void *, int need_fini);
-+
-+
-+static const char *dl_error_names[] = {
-+ "",
-+ "File not found",
-+ "Unable to open /dev/zero",
-+ "Not an ELF file",
-+#if defined (__i386__)
-+ "Not i386 binary",
-+#elif defined (__sparc__)
-+ "Not sparc binary",
-+#elif defined (__mc68000__)
-+ "Not m68k binary",
-+#else
-+ "Unrecognized binary type",
-+#endif
-+ "Not an ELF shared library",
-+ "Unable to mmap file",
-+ "No dynamic section",
-+#ifdef ELF_USES_RELOCA
-+ "Unable to process REL relocs",
-+#else
-+ "Unable to process RELA relocs",
-+#endif
-+ "Bad handle",
-+ "Unable to resolve symbol"
-+};
-+
-+static void __attribute__ ((destructor)) dl_cleanup(void)
-+{
-+ struct dyn_elf *d;
-+
-+ for (d = _dl_handles; d; d = d->next_handle)
-+ if (d->dyn->libtype == loaded_file && d->dyn->dynamic_info[DT_FINI]) {
-+ (* ((int (*)(void)) (d->dyn->loadaddr + d->dyn->dynamic_info[DT_FINI]))) ();
-+ d->dyn->dynamic_info[DT_FINI] = 0;
-+ }
-+}
-+
-+void *_dlopen(const char *libname, int flag)
-+{
-+ struct elf_resolve *tpnt, *tfrom, *tcurr;
-+ struct dyn_elf *dyn_chain, *rpnt = NULL;
-+ struct dyn_elf *dpnt;
-+ static int dl_init = 0;
-+ ElfW(Addr) from;
-+ struct elf_resolve *tpnt1;
-+ void (*dl_brk) (void);
-+
-+ /* A bit of sanity checking... */
-+ if (!(flag & (RTLD_LAZY|RTLD_NOW))) {
-+ _dl_error_number = LD_BAD_HANDLE;
-+ return NULL;
-+ }
-+
-+ from = (ElfW(Addr)) __builtin_return_address(0);
-+
-+ /* Have the dynamic linker use the regular malloc function now */
-+ if (!dl_init) {
-+ dl_init++;
-+ _dl_malloc_function = malloc;
-+ }
-+
-+ /* Cover the trivial case first */
-+ if (!libname)
-+ return _dl_symbol_tables;
-+
-+ _dl_map_cache();
-+
-+ /*
-+ * Try and locate the module we were called from - we
-+ * need this so that we get the correct RPATH. Note that
-+ * this is the current behavior under Solaris, but the
-+ * ABI+ specifies that we should only use the RPATH from
-+ * the application. Thus this may go away at some time
-+ * in the future.
-+ */
-+ tfrom = NULL;
-+ for (dpnt = _dl_symbol_tables; dpnt; dpnt = dpnt->next) {
-+ tpnt = dpnt->dyn;
-+ if (tpnt->loadaddr < from
-+ && (tfrom == NULL || tfrom->loadaddr < tpnt->loadaddr))
-+ tfrom = tpnt;
-+ }
-+
-+ /* Try to load the specified library */
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(_dl_debug_file, "Trying to dlopen '%s'\n", (char*)libname);
-+#endif
-+ tpnt = _dl_load_shared_library(0, &rpnt, tfrom, (char*)libname);
-+ if (tpnt == NULL) {
-+ _dl_unmap_cache();
-+ return NULL;
-+ }
-+
-+ dyn_chain = (struct dyn_elf *) malloc(sizeof(struct dyn_elf));
-+ _dl_memset(dyn_chain, 0, sizeof(struct dyn_elf));
-+ dyn_chain->dyn = tpnt;
-+ dyn_chain->flags = flag;
-+ if (!tpnt->symbol_scope)
-+ tpnt->symbol_scope = dyn_chain;
-+
-+ dyn_chain->next_handle = _dl_handles;
-+ _dl_handles = rpnt = dyn_chain;
-+
-+ if (tpnt->init_flag & INIT_FUNCS_CALLED) {
-+ /* If the init and fini stuff has already been run, that means
-+ * the dlopen'd library has already been loaded, and nothing
-+ * further needs to be done. */
-+ return (void *) dyn_chain;
-+ }
-+
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(_dl_debug_file, "Looking for needed libraries\n");
-+#endif
-+
-+ for (tcurr = tpnt; tcurr; tcurr = tcurr->next)
-+ {
-+ Elf32_Dyn *dpnt;
-+ char *lpntstr;
-+ for (dpnt = (Elf32_Dyn *) tcurr->dynamic_addr; dpnt->d_tag; dpnt++) {
-+ if (dpnt->d_tag == DT_NEEDED) {
-+
-+ char *name;
-+ lpntstr = (char*) (tcurr->loadaddr + tcurr->dynamic_info[DT_STRTAB] +
-+ dpnt->d_un.d_val);
-+ name = _dl_get_last_path_component(lpntstr);
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(_dl_debug_file, "Trying to load '%s', needed by '%s'\n",
-+ lpntstr, tcurr->libname);
-+#endif
-+
-+ if (!(tpnt1 = _dl_load_shared_library(0, &rpnt, tcurr, lpntstr))) {
-+ goto oops;
-+ }
-+
-+#if 1
-+//FIXME: Enabling this is _so_ wrong....
-+ /* We need global symbol resolution for everything
-+ * in the dependent chain */
-+ dyn_chain->flags |= RTLD_GLOBAL;
-+#endif
-+
-+ rpnt->next = (struct dyn_elf *) malloc(sizeof(struct dyn_elf));
-+ _dl_memset (rpnt->next, 0, sizeof (struct dyn_elf));
-+ rpnt = rpnt->next;
-+ if (!tpnt1->symbol_scope) tpnt1->symbol_scope = rpnt;
-+ rpnt->dyn = tpnt1;
-+
-+ }
-+ }
-+ }
-+
-+ /*
-+ * OK, now attach the entire chain at the end
-+ */
-+ rpnt->next = _dl_symbol_tables;
-+
-+#ifdef __mips__
-+ /*
-+ * Relocation of the GOT entries for MIPS have to be done
-+ * after all the libraries have been loaded.
-+ */
-+ _dl_perform_mips_global_got_relocations(tpnt);
-+#endif
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(_dl_debug_file, "Beginning dlopen relocation fixups\n");
-+#endif
-+ /*
-+ * OK, now all of the kids are tucked into bed in their proper addresses.
-+ * Now we go through and look for REL and RELA records that indicate fixups
-+ * to the GOT tables. We need to do this in reverse order so that COPY
-+ * directives work correctly */
-+ if (_dl_fixup(dyn_chain->dyn, dyn_chain->flags))
-+ goto oops;
-+
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(_dl_debug_file, "Beginning dlopen copy fixups\n");
-+#endif
-+ if (_dl_symbol_tables) {
-+ if (_dl_copy_fixups(dyn_chain))
-+ goto oops;
-+ }
-+
-+
-+ /* TODO: Should we set the protections of all pages back to R/O now ? */
-+
-+
-+ /* Notify the debugger we have added some objects. */
-+ _dl_debug_addr->r_state = RT_ADD;
-+ if (_dl_debug_addr) {
-+ dl_brk = (void (*)(void)) _dl_debug_addr->r_brk;
-+ if (dl_brk != NULL) {
-+ _dl_debug_addr->r_state = RT_ADD;
-+ (*dl_brk) ();
-+
-+ _dl_debug_addr->r_state = RT_CONSISTENT;
-+ (*dl_brk) ();
-+ }
-+ }
-+
-+#if 0 //def __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dlinfo();
-+#endif
-+
-+#ifdef __LIBDL_SHARED__
-+ /* Find the last library so we can run things in the right order */
-+ for (tpnt = dyn_chain->dyn; tpnt->next!=NULL; tpnt = tpnt->next)
-+ ;
-+
-+ /* Run the ctors and set up the dtors */
-+ for (; tpnt != dyn_chain->dyn->prev; tpnt=tpnt->prev)
-+ {
-+ /* Apparently crt1 for the application is responsible for handling this.
-+ * We only need to run the init/fini for shared libraries
-+ */
-+ if (tpnt->libtype == program_interpreter)
-+ continue;
-+ if (tpnt->libtype == elf_executable)
-+ continue;
-+ if (tpnt->init_flag & INIT_FUNCS_CALLED)
-+ continue;
-+ tpnt->init_flag |= INIT_FUNCS_CALLED;
-+
-+ if (tpnt->dynamic_info[DT_INIT]) {
-+ void (*dl_elf_func) (void);
-+ dl_elf_func = (void (*)(void)) (tpnt->loadaddr + tpnt->dynamic_info[DT_INIT]);
-+ if (dl_elf_func && *dl_elf_func != NULL) {
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(2, "running ctors for library %s at '%x'\n", tpnt->libname, dl_elf_func);
-+#endif
-+ (*dl_elf_func) ();
-+ }
-+ }
-+ if (tpnt->dynamic_info[DT_FINI]) {
-+ void (*dl_elf_func) (void);
-+ dl_elf_func = (void (*)(void)) (tpnt->loadaddr + tpnt->dynamic_info[DT_FINI]);
-+ if (dl_elf_func && *dl_elf_func != NULL) {
-+#ifdef __SUPPORT_LD_DEBUG__
-+ if(_dl_debug)
-+ _dl_dprintf(2, "setting up dtors for library %s at '%x'\n", tpnt->libname, dl_elf_func);
-+#endif
-+ atexit(dl_elf_func);
-+ }
-+ }
-+ }
-+#endif
-+ return (void *) dyn_chain;
-+
-+oops:
-+ /* Something went wrong. Clean up and return NULL. */
-+ _dl_unmap_cache();
-+ do_dlclose(dyn_chain, 0);
-+ return NULL;
-+}
-+
-+void *_dlsym(void *vhandle, const char *name)
-+{
-+ struct elf_resolve *tpnt, *tfrom;
-+ struct dyn_elf *handle;
-+ ElfW(Addr) from;
-+ struct dyn_elf *rpnt;
-+ void *ret;
-+
-+ handle = (struct dyn_elf *) vhandle;
-+
-+ /* First of all verify that we have a real handle
-+ of some kind. Return NULL if not a valid handle. */
-+
-+ if (handle == NULL)
-+ handle = _dl_symbol_tables;
-+ else if (handle != RTLD_NEXT && handle != _dl_symbol_tables) {
-+ for (rpnt = _dl_handles; rpnt; rpnt = rpnt->next_handle)
-+ if (rpnt == handle)
-+ break;
-+ if (!rpnt) {
-+ _dl_error_number = LD_BAD_HANDLE;
-+ return NULL;
-+ }
-+ } else if (handle == RTLD_NEXT) {
-+ /*
-+ * Try and locate the module we were called from - we
-+ * need this so that we know where to start searching
-+ * from. We never pass RTLD_NEXT down into the actual
-+ * dynamic loader itself, as it doesn't know
-+ * how to properly treat it.
-+ */
-+ from = (ElfW(Addr)) __builtin_return_address(0);
-+
-+ tfrom = NULL;
-+ for (rpnt = _dl_symbol_tables; rpnt; rpnt = rpnt->next) {
-+ tpnt = rpnt->dyn;
-+ if (tpnt->loadaddr < from
-+ && (tfrom == NULL || tfrom->loadaddr < tpnt->loadaddr)) {
-+ tfrom = tpnt;
-+ handle = rpnt->next;
-+ }
-+ }
-+ }
-+
-+ ret = _dl_find_hash((char*)name, handle, NULL, copyrel);
-+
-+ /*
-+ * Nothing found.
-+ */
-+ if (!ret)
-+ _dl_error_number = LD_NO_SYMBOL;
-+ return ret;
-+}
-+
-+int _dlclose(void *vhandle)
-+{
-+ return do_dlclose(vhandle, 1);
-+}
-+
-+static int do_dlclose(void *vhandle, int need_fini)
-+{
-+ struct dyn_elf *rpnt, *rpnt1;
-+ struct dyn_elf *spnt, *spnt1;
-+ ElfW(Phdr) *ppnt;
-+ struct elf_resolve *tpnt;
-+ int (*dl_elf_fini) (void);
-+ void (*dl_brk) (void);
-+ struct dyn_elf *handle;
-+ unsigned int end;
-+ int i = 0;
-+
-+ handle = (struct dyn_elf *) vhandle;
-+ rpnt1 = NULL;
-+ for (rpnt = _dl_handles; rpnt; rpnt = rpnt->next_handle) {
-+ if (rpnt == handle) {
-+ break;
-+ }
-+ rpnt1 = rpnt;
-+ }
-+
-+ if (!rpnt) {
-+ _dl_error_number = LD_BAD_HANDLE;
-+ return 1;
-+ }
-+
-+ /* OK, this is a valid handle - now close out the file.
-+ * We check if we need to call fini () on the handle. */
-+ spnt = need_fini ? handle : handle->next;
-+ for (; spnt; spnt = spnt1) {
-+ spnt1 = spnt->next;
-+
-+ /* We appended the module list to the end - when we get back here,
-+ quit. The access counts were not adjusted to account for being here. */
-+ if (spnt == _dl_symbol_tables)
-+ break;
-+ if (spnt->dyn->usage_count == 1
-+ && spnt->dyn->libtype == loaded_file) {
-+ tpnt = spnt->dyn;
-+ /* Apparently crt1 for the application is responsible for handling this.
-+ * We only need to run the init/fini for shared libraries
-+ */
-+
-+ if (tpnt->dynamic_info[DT_FINI]) {
-+ dl_elf_fini = (int (*)(void)) (tpnt->loadaddr +
-+ tpnt->dynamic_info[DT_FINI]);
-+ (*dl_elf_fini) ();
-+ }
-+ }
-+ }
-+ if (rpnt1)
-+ rpnt1->next_handle = rpnt->next_handle;
-+ else
-+ _dl_handles = rpnt->next_handle;
-+
-+ /* OK, this is a valid handle - now close out the file */
-+ for (rpnt = handle; rpnt; rpnt = rpnt1) {
-+ rpnt1 = rpnt->next;
-+
-+ /* We appended the module list to the end - when we get back here,
-+ quit. The access counts were not adjusted to account for being here. */
-+ if (rpnt == _dl_symbol_tables)
-+ break;
-+
-+ rpnt->dyn->usage_count--;
-+ if (rpnt->dyn->usage_count == 0
-+ && rpnt->dyn->libtype == loaded_file) {
-+ tpnt = rpnt->dyn;
-+ /* Apparently crt1 for the application is responsible for handling this.
-+ * We only need to run the init/fini for shared libraries
-+ */
-+#if 0
-+
-+ /* We have to do this above, before we start closing objects.
-+ * Otherwise when the needed symbols for _fini handling are
-+ * resolved a coredump would occur. Rob Ryan (robr@cmu.edu)*/
-+ if (tpnt->dynamic_info[DT_FINI]) {
-+ dl_elf_fini = (int (*)(void)) (tpnt->loadaddr + tpnt->dynamic_info[DT_FINI]);
-+ (*dl_elf_fini) ();
-+ }
-+#endif
-+ end = 0;
-+ for (i = 0, ppnt = rpnt->dyn->ppnt;
-+ i < rpnt->dyn->n_phent; ppnt++, i++) {
-+ if (ppnt->p_type != PT_LOAD)
-+ continue;
-+ if (end < ppnt->p_vaddr + ppnt->p_memsz)
-+ end = ppnt->p_vaddr + ppnt->p_memsz;
-+ }
-+ _dl_munmap((void*)rpnt->dyn->loadaddr, end);
-+ /* Next, remove rpnt->dyn from the loaded_module list */
-+ if (_dl_loaded_modules == rpnt->dyn) {
-+ _dl_loaded_modules = rpnt->dyn->next;
-+ if (_dl_loaded_modules)
-+ _dl_loaded_modules->prev = 0;
-+ } else
-+ for (tpnt = _dl_loaded_modules; tpnt; tpnt = tpnt->next)
-+ if (tpnt->next == rpnt->dyn) {
-+ tpnt->next = tpnt->next->next;
-+ if (tpnt->next)
-+ tpnt->next->prev = tpnt;
-+ break;
-+ }
-+ free(rpnt->dyn->libname);
-+ free(rpnt->dyn);
-+ }
-+ free(rpnt);
-+ }
-+
-+
-+ if (_dl_debug_addr) {
-+ dl_brk = (void (*)(void)) _dl_debug_addr->r_brk;
-+ if (dl_brk != NULL) {
-+ _dl_debug_addr->r_state = RT_DELETE;
-+ (*dl_brk) ();
-+
-+ _dl_debug_addr->r_state = RT_CONSISTENT;
-+ (*dl_brk) ();
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+const char *_dlerror(void)
-+{
-+ const char *retval;
-+
-+ if (!_dl_error_number)
-+ return NULL;
-+ retval = dl_error_names[_dl_error_number];
-+ _dl_error_number = 0;
-+ return retval;
-+}
-+
-+/*
-+ * Dump information to stderrr about the current loaded modules
-+ */
-+static char *type[] = { "Lib", "Exe", "Int", "Mod" };
-+
-+void _dlinfo(void)
-+{
-+ struct elf_resolve *tpnt;
-+ struct dyn_elf *rpnt, *hpnt;
-+
-+ _dl_dprintf(2, "List of loaded modules\n");
-+ /* First start with a complete list of all of the loaded files. */
-+ for (tpnt = _dl_loaded_modules; tpnt; tpnt = tpnt->next) {
-+ _dl_dprintf(2, "\t%x %x %x %s %d %s\n",
-+ (unsigned) tpnt->loadaddr, (unsigned) tpnt,
-+ (unsigned) tpnt->symbol_scope,
-+ type[tpnt->libtype],
-+ tpnt->usage_count, tpnt->libname);
-+ }
-+
-+ /* Next dump the module list for the application itself */
-+ _dl_dprintf(2, "\nModules for application (%x):\n",
-+ (unsigned) _dl_symbol_tables);
-+ for (rpnt = _dl_symbol_tables; rpnt; rpnt = rpnt->next)
-+ _dl_dprintf(2, "\t%x %s\n", (unsigned) rpnt->dyn, rpnt->dyn->libname);
-+
-+ for (hpnt = _dl_handles; hpnt; hpnt = hpnt->next_handle) {
-+ _dl_dprintf(2, "Modules for handle %x\n", (unsigned) hpnt);
-+ for (rpnt = hpnt; rpnt; rpnt = rpnt->next)
-+ _dl_dprintf(2, "\t%x %s\n", (unsigned) rpnt->dyn,
-+ rpnt->dyn->libname);
-+ }
-+}
-+
-+int _dladdr(void *__address, Dl_info * __dlip)
-+{
-+ struct elf_resolve *pelf;
-+ struct elf_resolve *rpnt;
-+
-+ _dl_map_cache();
-+
-+ /*
-+ * Try and locate the module address is in
-+ */
-+ pelf = NULL;
-+
-+#if 0
-+ _dl_dprintf(2, "dladdr( %x, %x )\n", __address, __dlip);
-+#endif
-+
-+ for (rpnt = _dl_loaded_modules; rpnt; rpnt = rpnt->next) {
-+ struct elf_resolve *tpnt;
-+
-+ tpnt = rpnt;
-+#if 0
-+ _dl_dprintf(2, "Module \"%s\" at %x\n",
-+ tpnt->libname, tpnt->loadaddr);
-+#endif
-+ if (tpnt->loadaddr < (ElfW(Addr)) __address
-+ && (pelf == NULL || pelf->loadaddr < tpnt->loadaddr)) {
-+ pelf = tpnt;
-+ }
-+ }
-+
-+ if (!pelf) {
-+ return 0;
-+ }
-+
-+ /*
-+ * Try and locate the symbol of address
-+ */
-+
-+ {
-+ char *strtab;
-+ Elf32_Sym *symtab;
-+ int hn, si;
-+ int sf;
-+ int sn = 0;
-+ ElfW(Addr) sa;
-+
-+ sa = 0;
-+ symtab = (Elf32_Sym *) (pelf->dynamic_info[DT_SYMTAB] + pelf->loadaddr);
-+ strtab = (char *) (pelf->dynamic_info[DT_STRTAB] + pelf->loadaddr);
-+
-+ sf = 0;
-+ for (hn = 0; hn < pelf->nbucket; hn++) {
-+ for (si = pelf->elf_buckets[hn]; si; si = pelf->chains[si]) {
-+ ElfW(Addr) symbol_addr;
-+
-+ symbol_addr = pelf->loadaddr + symtab[si].st_value;
-+ if (symbol_addr <= (ElfW(Addr))__address && (!sf || sa < symbol_addr)) {
-+ sa = symbol_addr;
-+ sn = si;
-+ sf = 1;
-+ }
-+#if 0
-+ _dl_dprintf(2, "Symbol \"%s\" at %x\n",
-+ strtab + symtab[si].st_name, symbol_addr);
-+#endif
-+ }
-+ }
-+
-+ if (sf) {
-+ __dlip->dli_fname = pelf->libname;
-+ __dlip->dli_fbase = (void *)pelf->loadaddr;
-+ __dlip->dli_sname = strtab + symtab[sn].st_name;
-+ __dlip->dli_saddr = (void *)sa;
-+ }
-+ return 1;
-+ }
-+}
-diff -urN uClibc/ldso-0.9.24/man/Makefile uClibc.ldso.24/ldso-0.9.24/man/Makefile
---- uClibc/ldso-0.9.24/man/Makefile 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/man/Makefile 2003-10-18 05:18:37.000000000 -0500
-@@ -0,0 +1,33 @@
-+# Makefile for uClibc
-+#
-+# Copyright (C) 2000,2001 Erik Andersen <andersen@uclibc.org>
-+#
-+# This program is free software; you can redistribute it and/or modify it under
-+# the terms of the GNU Library General Public License as published by the Free
-+# Software Foundation; either version 2 of the License, or (at your option) any
-+# later version.
-+#
-+# This program is distributed in the hope that it will be useful, but WITHOUT
-+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-+# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
-+# details.
-+#
-+# You should have received a copy of the GNU Library General Public License
-+# along with this program; if not, write to the Free Software Foundation, Inc.,
-+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+#
-+# Derived in part from the Linux-8086 C library, the GNU C Library, and several
-+# other sundry sources. Files within this library are copyright by their
-+# respective copyright holders.
-+
-+include ../Config.mk
-+
-+ALL = #ld.so.info
-+
-+all: $(ALL)
-+
-+ld.so.info: ld.so.texi
-+ makeinfo $<
-+
-+clean:
-+ $(RM) $(ALL) *~
-diff -urN uClibc/ldso-0.9.24/man/dlopen.3 uClibc.ldso.24/ldso-0.9.24/man/dlopen.3
---- uClibc/ldso-0.9.24/man/dlopen.3 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/man/dlopen.3 2001-04-23 12:43:54.000000000 -0500
-@@ -0,0 +1,218 @@
-+.\" -*- nroff -*-
-+.\" Copyright 1995 Yggdrasil Computing, Incorporated.
-+.\" written by Adam J. Richter (adam@yggdrasil.com),
-+.\" with typesetting help from Daniel Quinlan (quinlan@yggdrasil.com).
-+.\"
-+.\" This is free documentation; you can redistribute it and/or
-+.\" modify it under the terms of the GNU General Public License as
-+.\" published by the Free Software Foundation; either version 2 of
-+.\" the License, or (at your option) any later version.
-+.\"
-+.\" The GNU General Public License's references to "object code"
-+.\" and "executables" are to be interpreted as the output of any
-+.\" document formatting or typesetting system, including
-+.\" intermediate and printed output.
-+.\"
-+.\" This manual is distributed in the hope that it will be useful,
-+.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
-+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+.\" GNU General Public License for more details.
-+.\"
-+.\" You should have received a copy of the GNU General Public
-+.\" License along with this manual; if not, write to the Free
-+.\" Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
-+.\" USA.
-+.\"
-+.TH DLOPEN 3 "16 May 1995" "Linux" "Linux Programmer's Manual"
-+.SH NAME
-+dlclose, dlerror, dlopen, dlsym \- Programming interface to dynamic linking loader.
-+.SH SYNOPSIS
-+.B #include <dlfcn.h>
-+.sp
-+.BI "void *dlopen (const char *" "filename" ", int " flag ");
-+.br
-+.BI "const char *dlerror(void);"
-+.br
-+.BI "void *dlsym(void *"handle ", char *"symbol ");"
-+.br
-+.BI "int dladdr(void *"address ", Dl_info *"dlip ");"
-+.br
-+.BI "int dlclose (void *"handle ");
-+.sp
-+Special symbols:
-+.BR "_init" ", " "_fini" ". "
-+.SH DESCRIPTION
-+.B dlopen
-+loads a dynamic library from the file named by the null terminated
-+string
-+.I filename
-+and returns an opaque "handle" for the dynamic library.
-+If
-+.I filename
-+is not an absolute path (i.e., it does not begin with a "/"), then the
-+file is searched for in the following locations:
-+.RS
-+.PP
-+A colon-separated list of directories in the user's
-+\fBLD_LIBRARY\fP path environment variable.
-+.PP
-+The list of libraries specified in \fI/etc/ld.so.cache\fP.
-+.PP
-+\fI/usr/lib\fP, followed by \fI/lib\fP.
-+.RE
-+.PP
-+If
-+.I filename
-+is a NULL pointer, then the returned handle is for the main program.
-+.PP
-+External references in the library are resolved using the libraries
-+in that library's dependency list and any other libraries previously
-+opened with the
-+.B RTLD_GLOBAL
-+flag.
-+If the executable was linked
-+with the flag "-rdynamic", then the global symbols in the executable
-+will also be used to resolve references in a dynamically loaded
-+library.
-+.PP
-+.I flag
-+must be either
-+.BR RTLD_LAZY ,
-+meaning resolve undefined symbols as code from the dynamic library is
-+executed, or
-+.BR RTLD_NOW ,
-+meaning resolve all undefined symbols before
-+.B dlopen
-+returns, and fail if this cannot be done.
-+Optionally,
-+.B RTLD_GLOBAL
-+may be or'ed with
-+.IR flag,
-+in which case the external symbols defined in the library will be
-+made available to subsequently loaded libraries.
-+.PP
-+If the library exports a routine named
-+.BR _init ,
-+then that code is executed before dlopen returns.
-+If the same library is loaded twice with
-+.BR dlopen() ,
-+the same file handle is returned. The dl library maintains link
-+counts for dynamic file handles, so a dynamic library is not
-+deallocated until
-+.B dlclose
-+has been called on it as many times as
-+.B dlopen
-+has succeeded on it.
-+.PP
-+If
-+.B dlopen
-+fails for any reason, it returns NULL.
-+A human readable string describing the most recent error that occurred
-+from any of the dl routines (dlopen, dlsym or dlclose) can be
-+extracted with
-+.BR dlerror() .
-+.B dlerror
-+returns NULL if no errors have occurred since initialization or since
-+it was last called. (Calling
-+.B dlerror()
-+twice consecutively, will always result in the second call returning
-+NULL.)
-+
-+.B dlsym
-+takes a "handle" of a dynamic library returned by dlopen and the null
-+terminated symbol name, returning the address where that symbol is
-+loaded. If the symbol is not found,
-+.B dlsym
-+returns NULL; however, the correct way to test for an error from
-+.B dlsym
-+is to save the result of
-+.B dlerror
-+into a variable, and then check if saved value is not NULL.
-+This is because the value of the symbol could actually be NULL.
-+It is also necessary to save the results of
-+.B dlerror
-+into a variable because if
-+.B dlerror
-+is called again, it will return NULL.
-+.PP
-+.B dladdr
-+returns information about the shared library containing the memory
-+location specified by
-+.IR address .
-+.B dladdr
-+returns zero on success and non-zero on error.
-+.PP
-+.B dlclose
-+decrements the reference count on the dynamic library handle
-+.IR handle .
-+If the reference count drops to zero and no other loaded libraries use
-+symbols in it, then the dynamic library is unloaded. If the dynamic
-+library exports a routine named
-+.BR _fini ,
-+then that routine is called just before the library is unloaded.
-+.SH EXAMPLES
-+.B Load the math library, and print the cosine of 2.0:
-+.RS
-+.nf
-+.if t .ft CW
-+#include <dlfcn.h>
-+
-+int main(int argc, char **argv) {
-+ void *handle = dlopen ("/lib/libm.so", RTLD_LAZY);
-+ double (*cosine)(double) = dlsym(handle, "cos");
-+ printf ("%f\\n", (*cosine)(2.0));
-+ dlclose(handle);
-+}
-+.if t .ft P
-+.fi
-+.PP
-+If this program were in a file named "foo.c", you would build the program
-+with the following command:
-+.RS
-+.LP
-+gcc -rdynamic -o foo foo.c -ldl
-+.RE
-+.RE
-+.LP
-+.B Do the same thing, but check for errors at every step:
-+.RS
-+.nf
-+.if t .ft CW
-+#include <stdio.h>
-+#include <dlfcn.h>
-+
-+int main(int argc, char **argv) {
-+ void *handle;
-+ double (*cosine)(double);
-+ char *error;
-+
-+ handle = dlopen ("/lib/libm.so", RTLD_LAZY);
-+ if (!handle) {
-+ fputs (dlerror(), stderr);
-+ exit(1);
-+ }
-+
-+ cosine = dlsym(handle, "cos");
-+ if ((error = dlerror()) != NULL) {
-+ fputs(error, stderr);
-+ exit(1);
-+ }
-+
-+ printf ("%f\\n", (*cosine)(2.0));
-+ dlclose(handle);
-+}
-+.if t .ft P
-+.fi
-+.RE
-+.SH ACKNOWLEDGEMENTS
-+The dlopen interface standard comes from Solaris.
-+The Linux dlopen implementation was primarily written by
-+Eric Youngdale with help from Mitch D'Souza, David Engel,
-+Hongjiu Lu, Andreas Schwab and others.
-+The manual page was written by Adam Richter.
-+.SH SEE ALSO
-+.BR ld(1) ,
-+.BR ld.so(8) ,
-+.BR ldconfig(8) ,
-+.BR ldd(1) ,
-+.BR ld.so.info .
-diff -urN uClibc/ldso-0.9.24/man/ld.so.8 uClibc.ldso.24/ldso-0.9.24/man/ld.so.8
---- uClibc/ldso-0.9.24/man/ld.so.8 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/man/ld.so.8 2001-04-23 12:43:54.000000000 -0500
-@@ -0,0 +1,113 @@
-+.TH ld.so 8 "14 March 1998"
-+.SH NAME
-+ld.so/ld-linux.so \- dynamic linker/loader
-+.SH DESCRIPTION
-+.B ld.so
-+loads the shared libraries needed by a program, prepares the program
-+to run, and then runs it.
-+Unless explicitly specified via the
-+.B \-static
-+option to
-+.B ld
-+during compilation, all Linux programs are incomplete and require
-+further linking at run time.
-+.PP
-+The necessary shared libraries needed by the program are searched for
-+in the following order
-+.IP o
-+Using the environment variable
-+.B LD_LIBRARY_PATH
-+.RB ( LD_AOUT_LIBRARY_PATH
-+for a.out programs).
-+Except if the executable is a setuid/setgid binary, in which case it
-+is ignored.
-+.IP o
-+From the cache file
-+.BR /etc/ld.so.cache
-+which contains a compiled list of candidate libraries previously found
-+in the augmented library path.
-+.IP o
-+In the default path
-+.BR /usr/lib ,
-+and then
-+.BR /lib .
-+.SH ENVIRONMENT
-+.TP
-+.B LD_LIBRARY_PATH
-+A colon-separated list of directories in which to search for
-+ELF libraries at execution-time.
-+Similar to the
-+.B PATH
-+environment variable.
-+.TP
-+.B LD_PRELOAD
-+A whitespace-separated list of additional, user-specified, ELF shared
-+libraries to be loaded before all others.
-+This can be used to selectively override functions in other shared libraries.
-+For setuid/setgid ELF binaries, only libraries in the standard search
-+directories that are also setgid will be loaded.
-+.TP
-+.B LD_TRACE_LOADED_OBJECTS
-+If present, causes the program to list its dynamic library dependencies,
-+as if run by ldd, instead of running normally.
-+.TP
-+.B LD_BIND_NOW
-+If present, causes the dynamic linker to resolve all symbols at program
-+startup instead of when they are first referenced.
-+.TP
-+.B LD_AOUT_LIBRARY_PATH
-+A colon-separated list of directories in which to search for
-+a.out libraries at execution-time.
-+Similar to the
-+.B PATH
-+environment variable.
-+.TP
-+.B LD_AOUT_PRELOAD
-+The name of an additional, user-specified, a.out shared library to be loaded
-+after all others.
-+This can be used to selectively override functions in other shared libraries.
-+.TP
-+.B LD_NOWARN
-+Suppress warnings about a.out libraries with incompatible minor
-+version numbers.
-+.TP
-+.B LD_KEEPDIR
-+Don't ignore the directory in the names of a.out libraries to be loaded.
-+Use of this option is strongly discouraged.
-+.SH FILES
-+.PD 0
-+.TP 20
-+.B /lib/ld.so
-+a.out dynamic linker/loader
-+.TP 20
-+.B /lib/ld-linux.so.*
-+ELF dynamic linker/loader
-+.TP
-+.B /etc/ld.so.cache
-+File containing a compiled list of directories in which to search for
-+libraries and an ordered list of candidate libraries.
-+.TP
-+.B /etc/ld.so.preload
-+File containing a whitespace separated list of ELF shared libraries to
-+be loaded before the program.
-+libraries and an ordered list of candidate libraries.
-+.TP
-+.B lib*.so*
-+shared libraries
-+.PD
-+.SH SEE ALSO
-+.BR ldd (1),
-+.BR ldconfig (8).
-+.SH BUGS
-+.LP
-+Currently
-+.B ld.so
-+has no means of unloading and searching for compatible or newer version of
-+libraries.
-+.PP
-+.B ld.so
-+functionality is only available for executables compiled using libc version
-+4.4.3 or greater.
-+.SH AUTHORS
-+David Engel, Eric Youngdale, Peter MacDonald, Hongjiu Lu, Linus
-+Torvalds, Lars Wirzenius and Mitch D'Souza (not necessarily in that order).
-diff -urN uClibc/ldso-0.9.24/man/ld.so.texi uClibc.ldso.24/ldso-0.9.24/man/ld.so.texi
---- uClibc/ldso-0.9.24/man/ld.so.texi 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/man/ld.so.texi 2001-04-23 12:43:54.000000000 -0500
-@@ -0,0 +1,411 @@
-+\input texinfo @c -*-texinfo-*-
-+@c %**start of header
-+@setfilename ld.so.info
-+@settitle ld.so : Dynamic-Link Library support
-+@c %**end of header
-+
-+@ifinfo
-+This file documents the dynamic-link support libraries and utilities for the
-+Linux OS, version 1.8.1.
-+
-+Copyright 1996 Michael Deutschmann
-+
-+This document is subject to the GNU General Public License as published by
-+the Free Software foundation, version 2 or later (your choice).
-+
-+Note: The software described in this document is under a different copyright
-+and license.
-+
-+@end ifinfo
-+
-+@titlepage
-+@title ld.so
-+@subtitle Dynamic Link library support for the Linux OS.
-+@author David Engel
-+@author Eric Youngdale
-+@author Peter Macdonald
-+@author Hongjiu Lu
-+@author Mitch D'Souza
-+@author Michael Deutschmann (this documentation)
-+
-+@page
-+Copyright @copyright{} 1996 Michael Deutschmann
-+
-+This document is subject to the GNU General Public License as published by
-+the Free Software foundation, version 2 or later (your choice).
-+
-+Note: The software described in this document is under a different copyright
-+and license.
-+@end titlepage
-+
-+@ifinfo
-+@node Top
-+@top
-+
-+The @code{ld.so} module provides dynamic linked library support in Linux.
-+This file documents @code{ld.so} and its companion software.
-+
-+@menu
-+* intro:: Introduction
-+
-+* ld.so:: The dynamic linker core program
-+* ldd:: A utility to print out dependencies
-+* ldconfig:: A utility to maintain the cache and symlinks
-+* libdl:: Manual dynamic linking library
-+@end menu
-+
-+@end ifinfo
-+
-+@node intro
-+@unnumbered Introduction
-+
-+The @code{ld.so} suite contains special files and utilities needed for linux
-+to handle @dfn{dynamic libraries}.
-+
-+Ordinary static libraries (@file{lib*.a} files) are included into executables
-+that use their functions. A file that only uses static libraries needs less
-+intelligence to load, but takes up more space. If many executables use the
-+same library, there can be much wastage of storage space, since multiple
-+copies of the library functions are scattered across the executables.
-+However, static libraries are easier to make.
-+
-+Dynamic libraries (@file{lib*.so*} files) are not copied into executables ---
-+the executable is written in such a way that it will automatically load the
-+libraries. In linux, the executable will first load the special library
-+@code{ld.so} or @code{ld-linux.so}, which contains the intelligence
-+to load further dynamic libraries. Since multiple files end up getting
-+executable data from the same file, dynamic libraries are also known as
-+shared libraries.
-+
-+Linux executables come in two flavors, @sc{elf} and a.out.
-+
-+a.out is the original executable format used by Linux. It has somewhat less
-+overhead than @sc{elf}. However creating shared libraries for a.out is
-+@emph{very} involved, and each a.out shared library must be explicitly
-+registered.
-+
-+@sc{elf} is a more recent format, which supports a much simpler method of
-+creating libraries. @sc{elf} libraries may also be linked manually
-+(@pxref{libdl}).
-+
-+Since many library authors prefer @sc{elf} and no longer release shared a.out
-+libraries, a.out is moribund on Linux. This version of the @code{ld.so} can
-+be compiled to support only @sc{elf}, or to support both formats. (The last
-+release of ld.so to support a.out alone was 1.8.0.)
-+
-+@node ld.so
-+@chapter @code{ld.so}: Dynamic linker core
-+
-+@code{ld.so} works behind the scenes to handle dynamic libraries in Linux.
-+Users will almost never have to deal with it directly, but in special cases
-+one can send instructions to it through environment variables. Also, if
-+something is wrong with your libraries (usually an incorrect version) ld.so
-+will give error messages.
-+
-+Actually @code{ld.so} is the a.out linker. The new @sc{elf} executables are
-+handled by a related program @code{ld-linux.so}.
-+
-+@menu
-+* files:: Configuration files used by the suite
-+* environment:: Environment settings that tweak @code{ld.so}
-+* errors:: Complaints @code{ld.so} might make
-+@end menu
-+
-+@node files
-+@section Configuration Files
-+
-+@table @file
-+@item /etc/ld.so.cache
-+A file created by @code{ldconfig} and used to speed linking. It's structure
-+is private to the suite.
-+
-+@item /etc/ld.so.conf
-+A simple list of directories to scan for libraries, in addition to
-+@file{/usr/lib} and @file{/lib}, which are hardwired. It may contain
-+comments started with a @samp{#}.
-+
-+@item /etc/ld.so.preload
-+A list of libraries to preload. This allows preloading libraries for
-+setuid/setgid executables securely. It may contain comments.
-+@end table
-+
-+@node environment
-+@section Environment Variables
-+
-+@table @code
-+@item LD_AOUT_LIBRARY_PATH
-+@itemx LD_LIBRARY_PATH
-+These variables supply a library path for finding dynamic libraries, in the
-+standard colon seperated format. These variables are ignored when executing
-+setuid/setgid programs, because otherwise they would be a security hazard.
-+@code{ld.so} will use @code{LD_AOUT_LIBRARY_PATH} and @code{ld-linux.so} will
-+use @code{LD_LIBRARY_PATH}.
-+
-+@item LD_AOUT_PRELOAD
-+@itemx LD_PRELOAD
-+These variables allow an extra library not specified in the executable to be
-+loaded. Generally this is only useful if you want to override a function.
-+These are also ignored when running setuid/setgid executables. @code{ld.so}
-+will use @code{LD_AOUT_PRELOAD} and @code{ld-linux.so} will use
-+@code{LD_PRELOAD}.
-+
-+@item LD_NOWARN
-+If non-empty, errors about incompatible minor revisions are suppressed.
-+
-+@item LD_KEEPDIR
-+If non-empty, allow executables to specify absolute library names. This
-+option is deprecated.
-+@c FIXME:
-+@c The following are things I noticed in the ld-linux.so source.
-+@c I don't really understand 'em. Could someone help me?
-+@c
-+@c @item LD_BIND_NOW
-+@c This option is used by the @code{ld-linux.so} only. I don't know
-+@c what it does. (I suspect, looking at the code, that it specifies
-+@c "RTLD_NOW" rather than "RTLD_LAZY" mode for the shared libraries.)
-+@c
-+@c @item LD_TRACE_LOADED_OBJECTS
-+@c @itemx LD_WARN
-+@c These seem to have something to do with the communication between the
-+@c @code{ld-linux.so} and @code{ldd}. I don't know more.
-+@end table
-+
-+@node errors
-+@section Errors
-+
-+@table @samp
-+@item Can't find library @var{library}
-+The executable required a dynamically linked library that ld.so cannot find.
-+Your symbolic links may be not set right, or you may have not installed a
-+library needed by the program.
-+
-+@item Can't load library @var{library}
-+The library is corrupt.
-+
-+@item Incompatible library @var{library}
-+@itemx Require major version @var{x} and found @var{y}
-+Your version of the library is incompatible with the executable. Recompiling
-+the executable, or upgrading the library will fix the problem.
-+
-+@item using incompatible library @var{library}
-+@itemx Desire minor version >= @var{x} and found @var{y}.
-+Your version of the library is older than that expected by the executable,
-+but not so old that the library interface has radically changed, so the
-+linker will attempt to run anyway. There is a chance that it will work, but
-+you should upgrade the library or recompile the software. The environment
-+variable @code{LD_NOWARN} can be used to supress this message.
-+
-+@item too many directories in library path
-+The linker only supports up to 32 library directories. You have too many.
-+
-+@item dynamic linker error in @var{blah}
-+The linker is having trouble handling a binary - it is probably corrupt.
-+
-+@item can't map cache file @var{cache-file}
-+@itemx cache file @var{cache-file} @var{blah}
-+The linker cache file (generally @file{/etc/ld.so.cache}) is corrupt or
-+non-existent. These errors can be ignored, and can be prevented by
-+regenerating the cache file with @code{ldconfig}.
-+@end table
-+
-+@node ldd
-+@chapter @code{ldd}: Dependency scanner
-+
-+@code{ldd} is a utility that prints out the dynamic libraries that an
-+executable is linked to.
-+
-+Actually @code{ldd} works by signalling ld.so to print the dependencies.
-+For a.out executables this is done by starting the executable with
-+@code{argc} equal to 0. The linker detects this and prints the dependencies.
-+(This can cause problems with @emph{very} old binaries, which would run as
-+normal only with an inappropriate @code{argc}.)
-+
-+For @sc{elf} executables, special environment variables are used to tell the
-+linker to print the dependencies.
-+
-+@code{ldd} has a few options:
-+
-+@table @samp
-+@item -v
-+Print the version number of @code{ldd} itself
-+
-+@item -V
-+Print the version number of the dynamic linker
-+
-+@item -d
-+Report missing functions. This is only supported for @sc{elf} executables.
-+
-+@item -r
-+Report missing objects. This is also only available for @sc{elf}
-+executables.
-+@end table
-+
-+@node ldconfig
-+@chapter @code{ldconfig}: Setup program
-+
-+This utility is used by the system administrator to automatically set up
-+symbolic links needed by the libraries, and also to set up the cache file.
-+
-+@code{ldconfig} is run after new dynamic libraries are installed, and if the
-+cache file or links are damaged. It is also run when upgrading the
-+@code{ld.so} suite itself.
-+
-+The @file{/lib} and @file{/usr/lib} directories, and any listed in the file
-+@file{/etc/ld.so.conf} are scanned by default unless @samp{-n} is used.
-+Additional directories may be specified on the command line.
-+
-+It has the following options:
-+
-+@table @samp
-+@item -D
-+Enter debug mode. Implies @samp{-N} and @samp{-X}.
-+
-+@item -v
-+Verbose. Print out links created and directories scanned.
-+
-+@item -n
-+Check directories specified on the commandline @emph{only}.
-+
-+@item -N
-+Do not regenerate the cache.
-+
-+@item -X
-+Do not rebuild symbolic links.
-+
-+@item -l
-+Set up symbolic links for only libraries presented on the command line.
-+
-+@item -p
-+Print out the library pathnames in the cache file (@file{/etc/ld.so.cache})
-+@end table
-+
-+@node libdl
-+@chapter User dynamic linking library
-+
-+The @code{ld.so} package includes a small library of functions
-+(@code{libdl}) to allow manual dynamic linking. Normally programs are linked
-+so that dynamic functions and objects are automagically available. These
-+functions allow one to manually load and access a symbol from a library.
-+They are only available for @sc{elf} executables.
-+
-+@menu
-+* using libdl:: General points
-+* functions:: How to use the functions
-+* example:: A sample program
-+@end menu
-+
-+@node using libdl
-+@section Overview
-+
-+To access this library, add the flag @samp{-ldl} to your compile command when
-+linking the executable. You also must include the header file
-+@code{dlfcn.h}. You may also need the flag @samp{-rdynamic}, which enables
-+resolving references in the loaded libraries against your executable.
-+
-+Generally, you will first use @code{dlopen} to open a library. Then you use
-+@code{dlsym} one or more times to access symbols. Finally you use
-+@code{dlclose} to close the library.
-+
-+These facilities are most useful for language interpreters that provide
-+access to external libraries. Without @code{libdl}, it would be neccessary
-+to link the interpreter executable with any and all external libraries
-+needed by the programs it runs. With @code{libdl}, the interpreter only
-+needs to be linked with the libraries it uses itself, and can dynamically
-+load in additional ones if programs need it.
-+
-+@node functions
-+@section Functions
-+
-+@deftypefun void *dlopen ( const char @var{filename}, int @var{flags} )
-+
-+This function opens the dynamic library specified by @var{filename}
-+and returns an abstract handle, which can be used in subsequent calls to
-+@code{dlsym}. The function will respect the @code{LD_ELF_LIBRARY_PATH} and
-+@code{LD_LIBRARY_PATH} environment variables.
-+
-+@end deftypefun
-+
-+The following flags can be used with @code{dlopen}:
-+
-+@deftypevr Macro int RTLD_LAZY
-+Resolve symbols in the library as they are needed.
-+@end deftypevr
-+
-+@deftypevr Macro int RTLD_NOW
-+Resolve all symbols in the library before returning, and fail if not all can
-+be resolved. This is mutually exclusive with @code{RTLD_LAZY}.
-+@end deftypevr
-+
-+@deftypevr Macro int RTLD_GLOBAL
-+Make symbols in this library available for resolving symbols in other
-+libraries loaded with @code{dlopen}.
-+@end deftypevr
-+
-+@deftypefun int dlclose ( void *@var{handle} )
-+
-+This function releases a library handle.
-+
-+Note that if a library opened twice, the handle will be the same. However,
-+a reference count is used, so you should still close the library as many
-+times as you open it.
-+
-+@end deftypefun
-+
-+@deftypefun void *dlsym (void *@var{handle},char *@var{symbol-name})
-+
-+This function looks up the name @var{symbol-name} in the library and returns
-+it in the void pointer.
-+
-+If there is an error, a null pointer will be returned. However, it is
-+possible for a valid name in the library to have a null value, so
-+@code{dlerror} should be used to check if there was an error.
-+
-+@end deftypefun
-+
-+@deftypefun {libdl function} {const char} *dlerror( void )
-+
-+This function is used to read the error state. It returns a human-readable
-+string describing the last error, or null, meaning no error.
-+
-+The function resets the error value each time it is called, so the result
-+should be copied into a variable. If the function is called more than once
-+after an error, the second and subsequent calls will return null.
-+
-+@end deftypefun
-+
-+@node example
-+@section Example program
-+
-+Here is an example program that prints the cosine of two by manually linking
-+to the math library:
-+
-+@example
-+@c The following was snarfed verbatim from the dlopen.3 man file.
-+#include <stdio.h>
-+#include <dlfcn.h>
-+
-+int main(int argc, char **argv) @{
-+ void *handle;
-+ double (*cosine)(double);
-+ char *error;
-+
-+ handle = dlopen ("/lib/libm.so", RTLD_LAZY);
-+ if (!handle) @{
-+ fputs (dlerror(), stderr);
-+ exit(1);
-+ @}
-+
-+ cosine = dlsym(handle, "cos");
-+ if ((error = dlerror()) != NULL) @{
-+ fputs(error, stderr);
-+ exit(1);
-+ @}
-+
-+ printf ("%f\\n", (*cosine)(2.0));
-+ dlclose(handle);
-+@}
-+@end example
-+
-+@contents
-+
-+@bye
-diff -urN uClibc/ldso-0.9.24/man/ldconfig.8 uClibc.ldso.24/ldso-0.9.24/man/ldconfig.8
---- uClibc/ldso-0.9.24/man/ldconfig.8 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/man/ldconfig.8 2001-04-23 12:43:54.000000000 -0500
-@@ -0,0 +1,189 @@
-+.TH ldconfig 8 "14 March 1998"
-+.SH NAME
-+ldconfig \- determine run-time link bindings
-+.SH SYNOPSIS
-+ldconfig
-+.RB [ \-DvqnNX ]
-+.RB [ \-f\ conf ]
-+.RB [ \-C\ cache ]
-+.RB [ \-r\ root ]
-+.IR directory \ ...
-+.PD 0
-+.PP
-+.PD
-+ldconfig
-+.B \-l
-+.RB [ \-Dvq ]
-+.IR library \ ...
-+.PD 0
-+.PP
-+.PD
-+ldconfig
-+.B \-p
-+.SH DESCRIPTION
-+.B ldconfig
-+creates the necessary links and cache (for use by the run-time linker,
-+.IR ld.so )
-+to the most recent shared libraries found in the directories specified
-+on the command line, in the file
-+.IR /etc/ld.so.conf ,
-+and in the trusted directories
-+.RI ( /usr/lib
-+and
-+.IR /lib ).
-+.B ldconfig
-+checks the header and file names of the libraries it encounters when
-+determining which versions should have their links updated.
-+.B ldconfig
-+ignores symbolic links when scanning for libraries.
-+.PP
-+.B ldconfig
-+will attempt to deduce the type of ELF libs (ie. libc5 or libc6/glibc)
-+based on what C libs if any the library was linked against, therefore when
-+making dynamic libraries, it is wise to explicitly link against libc (use -lc).
-+.PP
-+Some existing libs do not contain enough information to allow the deduction of
-+their type, therefore the
-+.IR /etc/ld.so.conf
-+file format allows the specification of an expected type. This is
-+.B only
-+used for those ELF libs which we can not work out. The format
-+is like this "dirname=TYPE", where type can be libc4, libc5 or libc6.
-+(This syntax also works on the command line). Spaces are
-+.B not
-+allowed. Also see the
-+.B -p
-+option.
-+.PP
-+Directory names containing an
-+.B = are no longer legal
-+unless they also have an expected type specifier.
-+.PP
-+.B ldconfig
-+should normally be run by the super-user as it may require write
-+permission on some root owned directories and files.
-+It is normally run automatically at bootup, from /etc/rc, or manually
-+whenever new DLL's are installed.
-+.SH OPTIONS
-+.TP
-+.B \-D
-+Debug mode.
-+Implies
-+.B \-N
-+and
-+.BR \-X .
-+.TP
-+.B \-v
-+Verbose mode.
-+Print current version number, the name of each directory as it
-+is scanned and any links that are created.
-+Overrides quiet mode.
-+.TP
-+.B \-q
-+Quiet mode.
-+Don't print warnings.
-+.TP
-+.B \-n
-+Only process directories specified on the command line.
-+Don't process the trusted directories
-+.RI ( /usr/lib
-+and
-+.IR /lib )
-+nor those specified in
-+.IR /etc/ld.so.conf .
-+Implies
-+.BR \-N .
-+.TP
-+.B \-N
-+Don't rebuild the cache.
-+Unless
-+.B \-X
-+is also specified, links are still updated.
-+.TP
-+.B \-X
-+Don't update links.
-+Unless
-+.B \-N
-+is also specified, the cache is still rebuilt.
-+.TP
-+.B \-f conf
-+Use
-+.B conf
-+instead of
-+.IR /etc/ld.so.conf .
-+.TP
-+.B \-C cache
-+Use
-+.B cache
-+instead of
-+.IR /etc/ld.so.cache .
-+.TP
-+.B \-r root
-+Change to and use
-+.B root
-+as the root directory.
-+.TP
-+.B \-l
-+Library mode.
-+Manually link individual libraries.
-+Intended for use by experts only.
-+.TP
-+.B \-p
-+Print the lists of directories and candidate libraries stored in
-+the current cache.
-+.SH EXAMPLES
-+In the bootup file
-+.I /etc/rc
-+having the line
-+.RS
-+
-+/sbin/ldconfig -v
-+
-+.RE
-+will set up the correct links for the shared binaries and rebuild
-+the cache.
-+.TP
-+On the command line
-+.RS
-+
-+# /sbin/ldconfig -n /lib
-+
-+.RE
-+as root after the installation of a new DLL, will properly update the
-+shared library symbolic links in /lib.
-+
-+.SH FILES
-+.PD 0
-+.TP 20
-+.B /lib/ld.so
-+execution time linker/loader
-+.TP 20
-+.B /etc/ld.so.conf
-+File containing a list of colon, space, tab, newline, or comma spearated
-+directories in which to search for libraries.
-+.TP 20
-+.B /etc/ld.so.cache
-+File containing an ordered list of libraries found in the directories
-+specified in
-+.BR /etc/ld.so.conf .
-+.TP
-+.B lib*.so.version
-+shared libraries
-+.PD
-+.SH SEE ALSO
-+.BR ldd (1),
-+.BR ld.so (8).
-+.SH BUGS
-+.LP
-+.BR ldconfig 's
-+functionality, in conjunction with
-+.BR ld.so ,
-+is only available for executables compiled using libc version 4.4.3 or greater.
-+.PP
-+.BR ldconfig ,
-+being a user process, must be run manually and has no means of dynamically
-+determining and relinking shared libraries for use by
-+.BR ld.so
-+when a new DLL is installed.
-+.SH AUTHORS
-+David Engel and Mitch D'Souza.
-diff -urN uClibc/ldso-0.9.24/man/ldd.1 uClibc.ldso.24/ldso-0.9.24/man/ldd.1
---- uClibc/ldso-0.9.24/man/ldd.1 1969-12-31 18:00:00.000000000 -0600
-+++ uClibc.ldso.24/ldso-0.9.24/man/ldd.1 2001-04-23 12:43:54.000000000 -0500
-@@ -0,0 +1,59 @@
-+.\" Copyright 1995-2000 David Engel (david@ods.com)
-+.\" Copyright 1995 Rickard E. Faith (faith@cs.unc.edu)
-+.\" Most of this was copied from the README file. Do not restrict distribution.
-+.\" May be distributed under the GNU General Public License
-+.TH LDD 1 "14 March 1998"
-+.SH NAME
-+ldd \- print shared library dependencies
-+.SH SYNOPSIS
-+.B ldd
-+.RB [ \-vVdr ]
-+program|library ...
-+.SH DESCRIPTION
-+.B ldd
-+prints the shared libraries required by each program or shared library
-+specified on the command line.
-+If a shared library name does not contain a '/',
-+.B ldd
-+attempts to locate the library in the standard locations.
-+To run
-+.B ldd
-+on a shared library in the current directory, a "./" must be prepended
-+to its name.
-+.SH OPTIONS
-+.TP
-+.B \-v
-+Print the version number of
-+.BR ldd .
-+.TP
-+.B \-V
-+Print the version number of the dynamic linker,
-+.BR ld.so .
-+.TP
-+.B \-d
-+Perform relocations and report any missing functions (ELF only).
-+.TP
-+.B \-r
-+Perform relocations for both data objects and functions, and
-+report any missing objects (ELF only).
-+.SH BUGS
-+.B ldd
-+does not work very well on libc.so.5 itself.
-+.PP
-+.B ldd
-+does not work on a.out shared libraries.
-+.PP
-+.B ldd
-+does not work with some extremely old a.out programs which were
-+built before
-+.B ldd
-+support was added to the compiler releases.
-+If you use
-+.B ldd
-+on one of these programs, the program will attempt to run with argc = 0 and
-+the results will be unpredictable.
-+.SH AUTHOR
-+David Engel.
-+.SH SEE ALSO
-+.BR ldconfig (8),
-+.BR ld.so (8).
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-TARGET_mips=y
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-
-#
-# Target Architecture Features and Options
-#
-HAVE_ELF=y
-ARCH_SUPPORTS_LITTLE_ENDIAN=y
-TARGET_ARCH="mips"
-ARCH_CFLAGS="-mno-split-addresses"
-ARCH_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_MIPS_ISA_1 is not set
-CONFIG_MIPS_ISA_2=y
-# CONFIG_MIPS_ISA_3 is not set
-# CONFIG_MIPS_ISA_4 is not set
-# CONFIG_MIPS_ISA_MIPS32 is not set
-# CONFIG_MIPS_ISA_MIPS64 is not set
-ARCH_LITTLE_ENDIAN=y
-# ARCH_BIG_ENDIAN is not set
-# ARCH_HAS_NO_MMU is not set
-ARCH_HAS_MMU=y
-UCLIBC_HAS_FLOATS=y
-HAS_FPU=y
-DO_C99_MATH=y
-WARNINGS="-Wall"
-KERNEL_SOURCE="/usr/src/cvs/buildroot/build_mipsel/WRT54GS/release/src/linux/linux"
-C_SYMBOL_PREFIX=""
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# HAVE_NO_SHARED is not set
-HAVE_SHARED=y
-# ARCH_HAS_NO_LDSO is not set
-BUILD_UCLIBC_LDSO=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-UCLIBC_CTOR_DTOR=y
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-HAS_SHADOW=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-
-#
-# String and Stdio Support
-#
-# UCLIBC_HAS_STRING_GENERIC_OPT is not set
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# uClibc security related options
-#
-# UCLIBC_SECURITY is not set
-
-#
-# uClibc development/debugging options
-#
-# DODEBUG is not set
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MJN3_ONLY is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_h8300 is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-# TARGET_mips is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-
-#
-# Target Architecture Features and Options
-#
-HAVE_ELF=y
-TARGET_ARCH="none"
-# ARCH_LITTLE_ENDIAN is not set
-# ARCH_BIG_ENDIAN is not set
-# ARCH_HAS_NO_MMU is not set
-UCLIBC_HAS_FLOATS=y
-HAS_FPU=y
-DO_C99_MATH=y
-WARNINGS="-Wall"
-KERNEL_SOURCE="/usr/src/linux"
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-HAVE_SHARED=y
-BUILD_UCLIBC_LDSO=y
-# UCLIBC_PIE_SUPPORT is not set
-LDSO_LDD_SUPPORT=y
-UCLIBC_CTOR_DTOR=y
-# UCLIBC_PROPOLICE is not set
-# UCLIBC_PROFILING is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-HAS_SHADOW=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-UCLIBC_HAS_LOCALE=y
-UCLIBC_PREGENERATED_LOCALE_DATA=y
-UCLIBC_DOWNLOAD_PREGENERATED_LOCALE_DATA=y
-UCLIBC_HAS_XLOCALE=y
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_DIGIT_GROUPING=y
-UCLIBC_HAS_SCANF_LENIENT_DIGIT_GROUPING=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GETTEXT_AWARENESS=y
-UCLIBC_HAS_GNU_GETOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-UCLIBC_HAS_WORDEXP=y
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/usr/$(TARGET_ARCH)-linux-uclibc"
-DEVEL_PREFIX="/usr/$(TARGET_ARCH)-linux-uclibc"
-
-#
-# uClibc development/debugging options
-#
-# DODEBUG is not set
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MJN3_ONLY is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-TARGET_mips=y
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-
-#
-# Target Architecture Features and Options
-#
-HAVE_ELF=y
-ARCH_SUPPORTS_LITTLE_ENDIAN=y
-TARGET_ARCH="mips"
-ARCH_CFLAGS="-mno-split-addresses"
-ARCH_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_MIPS_ISA_1 is not set
-CONFIG_MIPS_ISA_2=y
-# CONFIG_MIPS_ISA_3 is not set
-# CONFIG_MIPS_ISA_4 is not set
-# CONFIG_MIPS_ISA_MIPS32 is not set
-# CONFIG_MIPS_ISA_MIPS64 is not set
-ARCH_LITTLE_ENDIAN=y
-# ARCH_BIG_ENDIAN is not set
-# ARCH_HAS_NO_MMU is not set
-ARCH_HAS_MMU=y
-UCLIBC_HAS_FLOATS=y
-HAS_FPU=y
-DO_C99_MATH=y
-WARNINGS="-Wall"
-KERNEL_SOURCE="/usr/src/linux"
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# HAVE_NO_SHARED is not set
-HAVE_SHARED=y
-# ARCH_HAS_NO_LDSO is not set
-BUILD_UCLIBC_LDSO=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-# UCLIBC_PIE_SUPPORT is not set
-LDSO_LDD_SUPPORT=y
-UCLIBC_CTOR_DTOR=y
-# UCLIBC_PROPOLICE is not set
-# UCLIBC_PROFILING is not set
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-HAS_SHADOW=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/usr/$(TARGET_ARCH)-linux-uclibc"
-DEVEL_PREFIX="/usr/$(TARGET_ARCH)-linux-uclibc"
-
-#
-# uClibc development/debugging options
-#
-# DODEBUG is not set
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MJN3_ONLY is not set
+++ /dev/null
---- util-linux-2.11z/mount/fstab.c.orig 2003-12-03 15:28:22.000000000 -0700
-+++ util-linux-2.11z/mount/fstab.c 2003-12-03 15:28:41.000000000 -0700
-@@ -342,7 +342,7 @@
- /* Ensure that the lock is released if we are interrupted. */
- static void
- handler (int sig) {
-- die (EX_USER, "%s", sys_siglist[sig]);
-+ die (EX_USER, "%s", strsignal(sig));
- }
-
- static void
---- /dev/null 2003-09-07 01:55:59.000000000 -0600
-+++ util-linux-2.11z/mount/swapargs.h 2003-12-03 15:44:50.000000000 -0700
-@@ -0,0 +1,3 @@
-+#define SWAPON_HAS_TWO_ARGS
-+#include <asm/page.h>
-+#include <sys/swap.h>
---- util-linux-2.11z/mount/swap.configure.orig 2003-12-03 15:43:24.000000000 -0700
-+++ util-linux-2.11z/mount/swap.configure 2003-12-03 15:45:33.000000000 -0700
-@@ -1,6 +1,8 @@
- # Find out whether we can include <sys/swap.h>
- # and whether libc thinks that swapon() has two arguments.
-
-+exit 0
-+
- # Prepare test
- CC=${CC-cc}
- compile="$CC -o conftest conftest.c >/dev/null 2>&1"
+++ /dev/null
---- valgrind-2.1.1.orig/coregrind/vg_syscalls.c 2004-02-24 17:07:10.000000000 -0700
-+++ valgrind-2.1.1/coregrind/vg_syscalls.c 2004-04-16 18:13:11.000000000 -0600
-@@ -3231,6 +3245,93 @@
- case CDROM_CLEAR_OPTIONS: /* 0x5321 */
- break;
-
-+ /* Stuff added by Erik Andersen for general device probing/handling */
-+#define BLKSSZGET _IO(0x12,104)
-+ case BLKSSZGET:
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(BLKSSZGET)", arg3,
-+ sizeof(int));
-+ break;
-+#undef _IOR
-+#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
-+#define BLKGETSIZE64 _IOR(0x12,114,sizeof(uint64_t))
-+ case BLKGETSIZE64:
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(BLKGETSIZE64)", arg3,
-+ sizeof(uint64_t));
-+ break;
-+#define HDIO_GETGEO 0x0301 /* get device geometry */
-+ case HDIO_GETGEO:
-+ {
-+ struct hd_geometry {
-+ unsigned char heads;
-+ unsigned char sectors;
-+ unsigned short cylinders;
-+ unsigned long start;
-+ };
-+
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(HDIO_GETGEO)", arg3,
-+ sizeof(struct hd_geometry));
-+ }
-+ break;
-+#define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
-+#define struct_hd_driveid_size 256 /* ATA6 specifies words 0-255 */
-+ case HDIO_GET_IDENTITY:
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(HDIO_GET_IDENTITY)", arg3,
-+ struct_hd_driveid_size);
-+ break;
-+#define SCSI_IOCTL_GET_IDLUN 0x5382
-+ case SCSI_IOCTL_GET_IDLUN:
-+ {
-+ struct scsi_idlun
-+ {
-+ int mux4;
-+ int host_unique_id;
-+
-+ };
-+
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(SCSI_IOCTL_GET_IDLUN)", arg3,
-+ sizeof(struct scsi_idlun));
-+ }
-+ break;
-+#define SCSI_IOCTL_SEND_COMMAND 1
-+ case SCSI_IOCTL_SEND_COMMAND:
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(SCSI_IOCTL_SEND_COMMAND)", arg3,
-+ ((2 * sizeof(unsigned int)) + 6 + 512));
-+ break;
-+#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
-+ case SCSI_IOCTL_GET_BUS_NUMBER:
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(SCSI_IOCTL_GET_BUS_NUMBER)", arg3,
-+ sizeof(int));
-+ break;
-+#define SCSI_IOCTL_PROBE_HOST 0x5385
-+ case SCSI_IOCTL_PROBE_HOST:
-+ {
-+ int xxxx;
-+ char *array = (char*)arg3;
-+ xxxx = array[0] + (array[1]<<8) + (array[2]<<16) + (array[3]<<24);
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(SCSI_IOCTL_PROBE_HOST)", arg3,
-+ sizeof(int));
-+ }
-+ break;
-+#define BLKFLSBUF _IO(0x12,97)
-+ case BLKFLSBUF:
-+ break;
-+#define BLKRRPART _IO(0x12,95)
-+ case BLKRRPART:
-+ break;
-+#define MTIOCTOP _IO(0x6d,0x1)
-+ case MTIOCTOP:
-+ {
-+ struct mtop
-+ {
-+ short int mt_op; /* Operations defined below. */
-+ int mt_count; /* How many of them. */
-+ };
-+ SYSCALL_TRACK( pre_mem_write, tid, "ioctl(MTIOCTOP)", arg3,
-+ sizeof(struct mtop));
-+ }
-+ break;
-+
-+
- /* We don't have any specific information on it, so
- try to do something reasonable based on direction and
- size bits. The encoding scheme is described in
---- valgrind-2.1.1.orig/coregrind/vg_libpthread.c 2004-03-08 08:57:17.000000000 -0700
-+++ valgrind-2.1.1/coregrind/vg_libpthread.c 2004-04-16 17:58:31.000000000 -0600
-@@ -3175,6 +3175,8 @@
- pthread_mutex). So basically, this is completely broken on recent
- glibcs. */
-
-+#ifndef __UCLIBC__
-+
- #undef _IO_flockfile
- void _IO_flockfile ( _IO_FILE * file )
- {
-@@ -3192,6 +3194,7 @@
- weak_alias(_IO_funlockfile, funlockfile);
- #endif
-
-+#endif
-
- /* This doesn't seem to be needed to simulate libpthread.so's external
- interface, but many people complain about its absence. */
+++ /dev/null
-diff -urN vtun/Makefile.in vtun-2.6/Makefile.in
---- vtun/Makefile.in 2002-12-20 09:55:47.000000000 -0700
-+++ vtun-2.6/Makefile.in 2003-06-05 12:38:31.000000000 -0600
-@@ -28,7 +28,7 @@
- LEXFLAGS = -t
-
- INSTALL = @INSTALL@
--INSTALL_OWNER = -o root -g 0
-+INSTALL_OWNER =
-
- prefix = @prefix@
- exec_prefix = @exec_prefix@
-@@ -86,15 +86,15 @@
-
- install_config:
- $(INSTALL) -d -m 755 $(INSTALL_OWNER) $(DESTDIR)$(ETC_DIR)
-- if [ ! -f $(ETC_DIR)/vtund.conf ]; then \
-- $(INSTALL) -m 600 $(INSTALL_OWNER) vtund.conf $(DESTDIR)$(ETC_DIR); \
-- fi
-+ $(INSTALL) -m 600 $(INSTALL_OWNER) vtund.conf $(DESTDIR)$(ETC_DIR);
-+ $(INSTALL) -m 600 $(INSTALL_OWNER) scripts/vtund-start.conf $(DESTDIR)$(ETC_DIR);
-
- install: vtund install_config install_man
-- $(INSTALL) -d -m 755 $(INSTALL_OWNER) $(DESTDIR)$(VAR_DIR)/run
- $(INSTALL) -d -m 755 $(INSTALL_OWNER) $(DESTDIR)$(STAT_DIR)
- $(INSTALL) -d -m 755 $(INSTALL_OWNER) $(DESTDIR)$(LOCK_DIR)
- $(INSTALL) -d -m 755 $(INSTALL_OWNER) $(DESTDIR)$(SBIN_DIR)
- $(INSTALL) -m 755 $(INSTALL_OWNER) vtund $(DESTDIR)$(SBIN_DIR)
-+ $(INSTALL) -m 755 $(INSTALL_OWNER) scripts/vtund.rc.debian \
-+ $(DESTDIR)$(ETC_DIR)/init.d/S90vtun
-
- # DO NOT DELETE THIS LINE -- make depend depends on it.
-diff -urN vtun/scripts/vtund.rc.debian vtun-2.6/scripts/vtund.rc.debian
---- vtun/scripts/vtund.rc.debian 2000-03-26 10:06:37.000000000 -0700
-+++ vtun-2.6/scripts/vtund.rc.debian 2003-06-05 12:38:46.000000000 -0600
-@@ -1,92 +1,48 @@
--#! /usr/bin/perl -w
-+#! /bin/sh
-+#
-
--### vtund-start
--###
--### script to start vtund as either a server or a client, according to
--### the config file /etc/vtund-start.conf
--###
--### Copyright 1999 Craig Sanders <cas@taz.net.au>
--###
--### Written for the Debian GNU/Linux distribution. This script is free
--### software licensed under the terms of the GNU General Public License.
--
--$DAEMON="/usr/sbin/vtund" ;
--
--$do_what = shift ;
--$args="start|stop|reload|force-reload|restart" ;
--if ( $do_what !~ /^($args)$/i ) {
-- print "Usage: /etc/init.d/vtun {$args}\n" ;
-- exit 0 ;
--}
--
--$SSD="/sbin/start-stop-daemon" ;
--$SSDARGS="--verbose --exec $DAEMON" ;
--
--$sconf="/etc/vtund-start.conf" ;
--open(SCONF,"<$sconf") || die "couldn't open $sconf: $!\n" ;
--while (<SCONF>) {
-- chomp ;
-- s/#.*//;
-- s/^ +| +$//;
-- next if (/^$/) ;
--
-- @line = split ;
-- $host = shift(@line) ;
-- $server = shift(@line) ;
-- $args = "" ;
-- foreach (@line) { $args .= " $_" } ;
--
-- $host='' if ($host =~ /--server--/i ) ;
--
-- if ( $do_what eq 'start' ) {
-- &start($host,$server,$args) ;
-- } elsif ( $do_what eq 'stop' ) {
-- &stop($host,$server,$args) ;
-- } elsif ( $do_what eq 'restart' ) {
-- &stop($pidfile) ;
-- &start($host,$server,$args) ;
-- } elsif ( $do_what =~ /^(reload|force-reload)$/ ) {
-- &reload($host,$server) ;
-- }
--}
--close (SCONF);
--
--
--sub start {
-- my($host,$server,$args) = @_ ;
-- print " Starting vtun " ;
-- if ($host eq '') {
-- print "server\n" ;
-- system "$SSD --start $SSDARGS -- $args -s -P $server" ;
-- } else {
-- print "client $host to $server\n" ;
-- $pidfile="/var/run/vtun.$host.$server" ;
-- system "$SSD --start $SSDARGS --pidfile $pidfile -- $args $host $server" ;
-- }
--} ;
--
--sub stop {
-- my($host,$server,$args) = @_ ;
-- print " Stopping vtun " ;
-- if ($host eq '') {
-- print "server\n" ;
-- system "$SSD --stop $SSDARGS" ;
-- } else {
-- print "client $host to $server\n" ;
-- $pidfile="/var/run/vtun.$host.$server" ;
-- system "$SSD --stop $SSDARGS --pidfile $pidfile" ;
-- }
--} ;
--
--sub reload {
-- my($host,$server) = @_ ;
-- print " Reloading vtun " ;
-- if ($host eq '') {
-- print "server\n" ;
-- system "$SSD --stop $SSDARGS --signal 1" ;
-- } else {
-- print "client $host to $server\n" ;
-- $pidfile="/var/run/vtun.$host.$server" ;
-- system "$SSD --stop $SSDARGS --signal 1 --pidfile $pidfile" ;
-- }
--}
-+PATH=/bin:/usr/bin:/sbin:/usr/sbin
-+DAEMON=/usr/sbin/vtund
-+CONFFILE=/etc/vtund-start.conf
-+PIDPREFIX=/var/run/vtund
-+
-+test -f $DAEMON || exit 0
-+
-+case "$1" in
-+ start)
-+ # find all the defined tunnels
-+ egrep -v '^[:space:]*(#.*)?$' $CONFFILE | while true;
-+ do
-+ read i
-+ # no more lines available? done, then.
-+ if [ $? != 0 ] ; then break; fi
-+ SARGS=`echo $i|sed -ne 's/--server--\s*/-s -P /p'`;
-+ if [ -n "$SARGS" ];
-+ then
-+ echo "Starting vtund server."
-+ start-stop-daemon -S -x $DAEMON -- $SARGS;
-+ else
-+ # split args into host and rest
-+ HOST=`echo $i|cut -f 1 -d " "`;
-+ TARGET=`echo $i|cut -f 2 -d " "`;
-+ echo "Starting vtund client $HOST to $TARGET.";
-+ start-stop-daemon -S -x $DAEMON -- $i;
-+ fi
-+ done
-+ ;;
-+ stop)
-+ echo "Stopping vtund.";
-+ start-stop-daemon -K -x vtund;
-+ ;;
-+
-+ restart|reload|force-reload)
-+ $0 stop
-+ sleep 1;
-+ $0 start
-+ ;;
-+ *)
-+ echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
-+ exit 1
-+ ;;
-+esac
-+exit 0
---- vtun-2.6/configure.dist 2004-03-11 10:39:10.000000000 -0600
-+++ vtun-2.6/configure 2004-03-11 10:45:52.000000000 -0600
-@@ -2112,7 +2112,7 @@
- echo $ac_n "checking "for blowfish.h"""... $ac_c" 1>&6
- echo "configure:2114: checking "for blowfish.h"" >&5
- ac_hdr_found=no
-- for p in $BLOWFISH_HDR_DIR /usr/include/ssl /usr/include/openssl /usr/include /usr/local/include /usr/local/ssl/include /usr/include/crypto; do
-+ for p in $BLOWFISH_HDR_DIR $SSL_HDR_DIR /usr/include/ssl /usr/include/openssl /usr/include /usr/local/include /usr/local/ssl/include /usr/include/crypto; do
- if test -n "$p"; then
- dir="$p"
- else
+++ /dev/null
-#!/bin/sh
-exec /usr/bin/bison -y "$@"
+++ /dev/null
-#!/bin/sh
-# $Id$
-
-
-[ -f "/tmp/.firstboot" ] && {
- echo "firstboot is already running"
- return
-}
-touch /tmp/.firstboot
-
-jdev=$(mount | awk '/jffs2/ {print $3}')
-
-if [ -z "$jdev" ]; then
- echo -n "Creating jffs2 partition... "
- mtd erase OpenWrt >&-
- mount -t jffs2 /dev/mtdblock/4 /jffs
- echo "done"
- cd /jffs
-else
- echo "firstboot has already been run"
- echo "jffs2 partition is mounted, only resetting files"
- cd $jdev
-fi
-
-exec 2>/dev/null
-
-mount /dev/mtdblock/2 /rom -o ro
-
-echo -n "creating directories... "
-{
- cd /rom
- find . -type d
- cd -
-} | xargs mkdir
-echo "done"
-
-echo -n "setting up symlinks... "
-for file in $(cd /rom; find * -type f; find * -type l;)
-do {
- ln -sf /rom/$file $file
-} done
-echo "done"
-
-touch /tmp/resolv.conf
-ln -s /tmp/resolv.conf /etc/resolv.conf
-
-umount /rom
-mount none /jffs/proc -t proc
-pivot_root /jffs /jffs/rom
-mount none /dev -t devfs
-mount none /tmp -t ramfs
-umount /rom/proc
-umount /rom/tmp
-umount /rom/dev
+++ /dev/null
-#!/bin/sh
-# ipkg - the itsy package management system
-#
-# Copyright (C) 2001 Carl D. Worth
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-set -e
-
-# By default do not do globbing. Any command wanting globbing should
-# explicitly enable it first and disable it afterwards.
-set -o noglob
-
-ipkg_is_upgrade () {
- local A B a b
- A=$(echo $1 | sed "s/[0-9]*/ & /g")
- B=$(echo $2 | sed "s/[0-9]*/ & /g")
- while [ \! -z "$A" ] && [ \! -z "$B" ]; do {
- set $A; a=$1; shift; A=$*
- set $B; b=$1; shift; B=$*
- { [ "$a" -gt "$b" ] 2>&- || [ "$a" ">" "$b" ]; } && { return 0; }
- }; done
- return 1;
-}
-
-ipkg_srcs() {
- local srcre="$1"
- sed -ne "s/^src[[:space:]]\+$srcre[[:space:]]\+//p" < $IPKG_CONF
-}
-
-ipkg_src_names() {
- sed -ne "s/^src[[:space:]]\+\([^[:space:]]\+\).*/\1/p" < $IPKG_CONF
-}
-
-ipkg_src_byname() {
- local src="$1"
- ipkg_srcs $src | head -1
-}
-
-ipkg_dests() {
- local destre="`echo $1 | ipkg_protect_slashes`"
- sed -ne "/^dest[[:space:]]\+$destre/{
-s/^dest[[:space:]]\+[^[:space:]]\+[[:space:]]\+//
-s/^/`echo $IPKG_OFFLINE_ROOT | ipkg_protect_slashes`/
-p
-}" < $IPKG_CONF
-}
-
-ipkg_dest_names() {
- sed -ne "s/^dest[[:space:]]\+\([^[:space:]]\+\).*/\1/p" < $IPKG_CONF
-}
-
-ipkg_dests_all() {
- ipkg_dests '.*'
-}
-
-ipkg_state_dirs() {
- ipkg_dests_all | sed "s|\$|/$IPKG_DIR_PREFIX|"
-}
-
-ipkg_dest_default() {
- ipkg_dests_all | head -1
-}
-
-ipkg_dest_default_name() {
- ipkg_dest_names | head -1
-}
-
-ipkg_dest_byname() {
- local dest="$1"
- ipkg_dests $dest | head -1
-}
-
-ipkg_option() {
- local option="$1"
- sed -ne "s/^option[[:space:]]\+$option[[:space:]]\+//p" < $IPKG_CONF
-}
-
-ipkg_load_configuration() {
- if [ -z "$IPKG_CONF_DIR" ]; then
- IPKG_CONF_DIR=/etc
- fi
-
- IPKG_CONF="$IPKG_CONF_DIR/ipkg.conf"
-
- if [ -z "$IPKG_OFFLINE_ROOT" ]; then
- IPKG_OFFLINE_ROOT="`ipkg_option offline_root`"
- fi
- # Export IPKG_OFFLINE_ROOT for use by update-alternatives
- export IPKG_OFFLINE_ROOT
- if [ -n "$DEST_NAME" ]; then
- IPKG_ROOT="`ipkg_dest_byname $DEST_NAME`"
- if [ -z "$IPKG_ROOT" ]; then
- if [ -d "$IPKG_OFFLINE_ROOT$DEST_NAME" ]; then
- IPKG_ROOT="$IPKG_OFFLINE_ROOT$DEST_NAME";
- else
- echo "ipkg: invalid destination specification: $DEST_NAME
-Valid destinations are directories or one of the dest names from $IPKG_CONF:" >&2
- ipkg_dest_names >&2
- return 1
- fi
- fi
- else
- IPKG_ROOT="`ipkg_dest_default`"
- fi
-
- # Global ipkg state directories
- IPKG_DIR_PREFIX=usr/lib/ipkg
- IPKG_LISTS_DIR=$IPKG_OFFLINE_ROOT/$IPKG_DIR_PREFIX/lists
- IPKG_PENDING_DIR=$IPKG_OFFLINE_ROOT/$IPKG_DIR_PREFIX/pending
- IPKG_TMP=$IPKG_ROOT/tmp/ipkg
-
- # Destination specific ipkg meta-data directory
- IPKG_STATE_DIR=$IPKG_ROOT/$IPKG_DIR_PREFIX
-
- # Proxy Support
- IPKG_PROXY_USERNAME="`ipkg_option proxy_username`"
- IPKG_PROXY_PASSWORD="`ipkg_option proxy_password`"
- IPKG_HTTP_PROXY="`ipkg_option http_proxy`"
- IPKG_FTP_PROXY="`ipkg_option ftp_proxy`"
- IPKG_NO_PROXY="`ipkg_option no_proxy`"
- if [ -n "$IPKG_HTTP_PROXY" ]; then
- export http_proxy="$IPKG_HTTP_PROXY"
- fi
-
- if [ -n "$IPKG_FTP_PROXY" ]; then
- export ftp_proxy="$IPKG_FTP_PROXY"
- fi
-
- if [ -n "$IPKG_NO_PROXY" ]; then
- export no_proxy="$IPKG_NO_PROXY"
- fi
-
- IPKG_STATUS_FIELDS='\(Package\|Status\|Essential\|Version\|Conffiles\|Root\)'
-}
-
-ipkg_usage() {
- [ $# -gt 0 ] && echo "ipkg: $*"
- echo "
-usage: ipkg [options...] sub-command [arguments...]
-where sub-command is one of:
-
-Package Manipulation:
- update Update list of available packages
- upgrade Upgrade all installed packages to latest version
- install <pkg> Download and install <pkg> (and dependencies)
- install <file.ipk> Install package <file.ipk>
- install <file.deb> Install package <file.deb>
- remove <pkg> Remove package <pkg>
-
-Informational Commands:
- list List available packages and descriptions
- files <pkg> List all files belonging to <pkg>
- search <file> Search for a packaging providing <file>
- info [pkg [<field>]] Display all/some info fields for <pkg> or all
- status [pkg [<field>]] Display all/some status fields for <pkg> or all
- depends <pkg> Print uninstalled package dependencies for <pkg>
-
-Options:
- -d <dest_name> Use <dest_name> as the the root directory for
- -dest <dest_name> package installation, removal, upgrading.
- <dest_name> should be a defined dest name from the
- configuration file, (but can also be a directory
- name in a pinch).
- -o <offline_root> Use <offline_root> as the root for offline installation.
- -offline <offline_root>
-
-Force Options (use when ipkg is too smart for its own good):
- -force-depends Make dependency checks warnings instead of errors
- -force-defaults Use default options for questions asked by ipkg.
- (no prompts). Note that this will not prevent
- package installation scripts from prompting.
-" >&2
- exit 1
-}
-
-ipkg_dir_part() {
- local dir="`echo $1 | sed -ne 's/\(.*\/\).*/\1/p'`"
- if [ -z "$dir" ]; then
- dir="./"
- fi
- echo $dir
-}
-
-ipkg_file_part() {
- echo $1 | sed 's/.*\///'
-}
-
-ipkg_protect_slashes() {
- sed -e 's/\//\\\//g'
-}
-
-ipkg_download() {
- local src="$1"
- local dest="$2"
-
- local src_file="`ipkg_file_part $src`"
- local dest_dir="`ipkg_dir_part $dest`"
- if [ -z "$dest_dir" ]; then
- dest_dir="$IPKG_TMP"
- fi
-
- local dest_file="`ipkg_file_part $dest`"
- if [ -z "$dest_file" ]; then
- dest_file="$src_file"
- fi
-
- # Proxy support
- local proxyuser=""
- local proxypassword=""
- local proxyoption=""
-
- if [ -n "$IPKG_PROXY_USERNAME" ]; then
- proxyuser="--proxy-user=\"$IPKG_PROXY_USERNAME\""
- proxypassword="--proxy-passwd=\"$IPKG_PROXY_PASSWORD\""
- fi
-
- if [ -n "$IPKG_PROXY_HTTP" -o -n "$IPKG_PROXY_FTP" ]; then
- proxyoption="--proxy=on"
- fi
-
- echo "Downloading $src ..."
- rm -f $IPKG_TMP/$src_file
- case "$src" in
- http://* | ftp://*)
- if ! wget --passive-ftp $proxyoption $proxyuser $proxypassword -P $IPKG_TMP $src; then
- echo "ipkg_download: ERROR: Failed to retrieve $src, returning $err"
- return 1
- fi
- mv $IPKG_TMP/$src_file $dest_dir/$dest_file 2>/dev/null
- ;;
- file:/* )
- ln -s `echo $src | sed 's/^file://'` $dest_dir/$dest_file 2>/dev/null
- ;;
- *)
- echo "DEBUG: $src"
- ;;
- esac
-
- echo "Done."
- return 0
-}
-
-ipkg_update() {
- if [ ! -e "$IPKG_LISTS_DIR" ]; then
- mkdir -p $IPKG_LISTS_DIR
- fi
-
- local err=
- for src_name in `ipkg_src_names`; do
- local src="`ipkg_src_byname $src_name`"
- if ! ipkg_download $src/Packages $IPKG_LISTS_DIR/$src_name; then
- echo "ipkg_update: Error downloading $src/Packages to $IPKG_LISTS_DIR/$src_name" >&2
- err=t
- else
- echo "Updated list of available packages in $IPKG_LISTS_DIR/$src_name"
- fi
- done
-
- [ -n "$err" ] && return 1
-
- return 0
-}
-
-ipkg_list() {
- for src in `ipkg_src_names`; do
- if ipkg_require_list $src; then
-# black magic...
-sed -ne "
-/^Package:/{
-s/^Package:[[:space:]]*\<\([a-z0-9.+-]*$1[a-z0-9.+-]*\).*/\1/
-h
-}
-/^Description:/{
-s/^Description:[[:space:]]*\(.*\)/\1/
-H
-g
-s/\\
-/ - /
-p
-}
-" $IPKG_LISTS_DIR/$src
- fi
- done
-}
-
-ipkg_extract_paragraph() {
- local pkg="$1"
- sed -ne "/Package:[[:space:]]*$pkg[[:space:]]*\$/,/^\$/p"
-}
-
-ipkg_extract_field() {
- local field="$1"
-# blacker magic...
- sed -ne "
-: TOP
-/^$field:/{
-p
-n
-b FIELD
-}
-d
-: FIELD
-/^$/b TOP
-/^[^[:space:]]/b TOP
-p
-n
-b FIELD
-"
-}
-
-ipkg_extract_value() {
- sed -e "s/^[^:]*:[[:space:]]*//"
-}
-
-ipkg_require_list() {
- [ $# -lt 1 ] && return 1
- local src="$1"
- if [ ! -f "$IPKG_LISTS_DIR/$src" ]; then
- echo "ERROR: File not found: $IPKG_LISTS_DIR/$src" >&2
- echo " You probably want to run \`ipkg update'" >&2
- return 1
- fi
- return 0
-}
-
-ipkg_info() {
- for src in `ipkg_src_names`; do
- if ipkg_require_list $src; then
- case $# in
- 0)
- cat $IPKG_LISTS_DIR/$src
- ;;
- 1)
- ipkg_extract_paragraph $1 < $IPKG_LISTS_DIR/$src
- ;;
- *)
- ipkg_extract_paragraph $1 < $IPKG_LISTS_DIR/$src | ipkg_extract_field $2
- ;;
- esac
- fi
- done
-}
-
-ipkg_status_sd() {
- [ $# -lt 1 ] && return 0
- sd="$1"
- shift
- if [ -f $sd/status ]; then
- case $# in
- 0)
- cat $sd/status
- ;;
- 1)
- ipkg_extract_paragraph $1 < $sd/status
- ;;
- *)
- ipkg_extract_paragraph $1 < $sd/status | ipkg_extract_field $2
- ;;
- esac
- fi
- return 0
-}
-
-ipkg_status_all() {
- for sd in `ipkg_state_dirs`; do
- ipkg_status_sd $sd $*
- done
-}
-
-ipkg_status() {
- if [ -n "$DEST_NAME" ]; then
- ipkg_status_sd $IPKG_STATE_DIR $*
- else
- ipkg_status_all $*
- fi
-}
-
-ipkg_status_matching_sd() {
- local sd="$1"
- local re="$2"
- if [ -f $sd/status ]; then
- sed -ne "
-: TOP
-/^Package:/{
-s/^Package:[[:space:]]*//
-s/[[:space:]]*$//
-h
-}
-/$re/{
-g
-p
-b NEXT
-}
-d
-: NEXT
-/^$/b TOP
-n
-b NEXT
-" < $sd/status
- fi
- return 0
-}
-
-ipkg_status_matching_all() {
- for sd in `ipkg_state_dirs`; do
- ipkg_status_matching_sd $sd $*
- done
-}
-
-ipkg_status_matching() {
- if [ -n "$DEST_NAME" ]; then
- ipkg_status_matching_sd $IPKG_STATE_DIR $*
- else
- ipkg_status_matching_all $*
- fi
-}
-
-ipkg_status_installed_sd() {
- local sd="$1"
- local pkg="$2"
- ipkg_status_sd $sd $pkg Status | grep -q "Status: install ok installed"
-}
-
-ipkg_status_installed_all() {
- local ret=1
- for sd in `ipkg_state_dirs`; do
- if `ipkg_status_installed_sd $sd $*`; then
- ret=0
- fi
- done
- return $ret
-}
-
-ipkg_status_mentioned_sd() {
- local sd="$1"
- local pkg="$2"
- [ -n "`ipkg_status_sd $sd $pkg Status`" ]
-}
-
-ipkg_files() {
- local pkg="$1"
- if [ -n "$DEST_NAME" ]; then
- dests=$IPKG_ROOT
- else
- dests="`ipkg_dests_all`"
- fi
- for dest in $dests; do
- if [ -f $dest/$IPKG_DIR_PREFIX/info/$pkg.list ]; then
- dest_sed="`echo $dest | ipkg_protect_slashes`"
- sed -e "s/^/$dest_sed/" < $dest/$IPKG_DIR_PREFIX/info/$pkg.list
- fi
- done
-}
-
-ipkg_search() {
- local pattern="$1"
-
- for dest_name in `ipkg_dest_names`; do
- dest="`ipkg_dest_byname $dest_name`"
- dest_sed="`echo $dest | ipkg_protect_slashes`"
-
- set +o noglob
- local list_files="`ls -1 $dest/$IPKG_DIR_PREFIX/info/*.list 2>/dev/null`"
- set -o noglob
- for file in $list_files; do
- if sed "s/^/$dest_sed/" $file | grep -q $pattern; then
- local pkg="`echo $file | sed "s/^.*\/\(.*\)\.list/\1/"`"
- [ "$dest_name" != `ipkg_dest_default_name` ] && pkg="$pkg ($dest_name)"
- sed "s/^/$dest_sed/" $file | grep $pattern | sed "s/^/$pkg: /"
- fi
- done
- done
-}
-
-ipkg_status_remove_sd() {
- local sd="$1"
- local pkg="$2"
-
- if [ ! -f $sd/status ]; then
- mkdir -p $sd
- touch $sd/status
- fi
- sed -ne "/Package:[[:space:]]*$pkg[[:space:]]*\$/,/^\$/!p" < $sd/status > $sd/status.new
- mv $sd/status.new $sd/status
-}
-
-ipkg_status_remove_all() {
- for sd in `ipkg_state_dirs`; do
- ipkg_status_remove_sd $sd $*
- done
-}
-
-ipkg_status_remove() {
- if [ -n "$DEST_NAME" ]; then
- ipkg_status_remove_sd $IPKG_STATE_DIR $*
- else
- ipkg_status_remove_all $*
- fi
-}
-
-ipkg_status_update_sd() {
- local sd="$1"
- local pkg="$2"
-
- ipkg_status_remove_sd $sd $pkg
- ipkg_extract_field "$IPKG_STATUS_FIELDS" >> $sd/status
- echo "" >> $sd/status
-}
-
-ipkg_status_update() {
- ipkg_status_update_sd $IPKG_STATE_DIR $*
-}
-
-ipkg_unsatisfied_dependences() {
- local pkg=$1
- local deps="`ipkg_get_depends $pkg`"
- local remaining_deps=
- for dep in $deps; do
- local installed="`ipkg_get_installed $dep`"
- if [ "$installed" != "installed" ] ; then
- remaining_deps="$remaining_deps $dep"
- fi
- done
- ## echo "ipkg_unsatisfied_dependences pkg=$pkg $remaining_deps" > /dev/console
- echo $remaining_deps
-}
-
-ipkg_safe_pkg_name() {
- local pkg=$1
- local spkg="`echo pkg_$pkg | sed -e y/-+./___/`"
- echo $spkg
-}
-
-ipkg_set_depends() {
- local pkg=$1; shift
- local new_deps="$*"
- pkg="`ipkg_safe_pkg_name $pkg`"
- ## setvar ${pkg}_depends "$new_deps"
- echo $new_deps > /tmp/ipkg/${pkg}.depends
-}
-
-ipkg_get_depends() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- cat /tmp/ipkg/${pkg}.depends
- ## eval "echo \$${pkg}_depends"
-}
-
-ipkg_set_installed() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- echo installed > /tmp/ipkg/${pkg}.installed
- ## setvar ${pkg}_installed "installed"
-}
-
-ipkg_set_uninstalled() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- ### echo ipkg_set_uninstalled $pkg > /dev/console
- echo uninstalled > /tmp/ipkg/${pkg}.installed
- ## setvar ${pkg}_installed "uninstalled"
-}
-
-ipkg_get_installed() {
- local pkg=$1
- pkg="`ipkg_safe_pkg_name $pkg`"
- if [ -f /tmp/ipkg/${pkg}.installed ]; then
- cat /tmp/ipkg/${pkg}.installed
- fi
- ## eval "echo \$${pkg}_installed"
-}
-
-ipkg_depends() {
- local new_pkgs="$*"
- local all_deps=
- local installed_pkgs="`ipkg_status_matching_all 'Status:.*[[:space:]]installed'`"
- for pkg in $installed_pkgs; do
- ipkg_set_installed $pkg
- done
- while [ -n "$new_pkgs" ]; do
- all_deps="$all_deps $new_pkgs"
- local new_deps=
- for pkg in $new_pkgs; do
- if echo $pkg | grep -q '[^a-z0-9.+-]'; then
- echo "ipkg_depends: ERROR: Package name $pkg contains illegal characters (should be [a-z0-9.+-])" >&2
- return 1
- fi
- # TODO: Fix this. For now I am ignoring versions and alternations in dependencies.
- new_deps="$new_deps "`ipkg_info $pkg '\(Pre-\)\?Depends' | ipkg_extract_value | sed -e 's/([^)]*)//g
-s/\(|[[:space:]]*[a-z0-9.+-]\+[[:space:]]*\)\+//g
-s/,/ /g
-s/ \+/ /g'`
- ipkg_set_depends $pkg $new_deps
- done
-
- new_deps=`echo $new_deps | sed -e 's/[[:space:]]\+/\\
-/g' | sort | uniq`
-
- local maybe_new_pkgs=
- for pkg in $new_deps; do
- if ! echo $installed_pkgs | grep -q "\<$pkg\>"; then
- maybe_new_pkgs="$maybe_new_pkgs $pkg"
- fi
- done
-
- new_pkgs=
- for pkg in $maybe_new_pkgs; do
- if ! echo $all_deps | grep -q "\<$pkg\>"; then
- if [ -z "`ipkg_info $pkg`" ]; then
- echo "ipkg_depends: Warning: $pkg mentioned in dependency but no package found in $IPKG_LISTS_DIR" >&2
- ipkg_set_installed $pkg
- else
- new_pkgs="$new_pkgs $pkg"
- ipkg_set_uninstalled $pkg
- fi
- else
- ipkg_set_uninstalled $pkg
- fi
- done
- done
-
- echo $all_deps
-}
-
-ipkg_get_install_dest() {
- local dest="$1"
- shift
- local sd=$dest/$IPKG_DIR_PREFIX
- local info_dir=$sd/info
-
- local requested_pkgs="$*"
- local pkgs="`ipkg_depends $*`"
-
- mkdir -p $info_dir
- for pkg in $pkgs; do
- if ! ipkg_status_mentioned_sd $sd $pkg; then
- echo "Package: $pkg
-Status: install ok not-installed" | ipkg_status_update_sd $sd $pkg
- fi
- done
- ## mark the packages that we were directly requested to install as uninstalled
- for pkg in $requested_pkgs; do ipkg_set_uninstalled $pkg; done
-
- local new_pkgs=
- local pkgs_installed=0
- while [ -n "pkgs" ]; do
- curcheck=0
- ## echo "pkgs to install: {$pkgs}" > /dev/console
- for pkg in $pkgs; do
- curcheck="`expr $curcheck + 1`"
- local is_installed="`ipkg_get_installed $pkg`"
- if [ "$is_installed" = "installed" ]; then
- echo "$pkg is installed" > /dev/console
- continue
- fi
-
- local remaining_deps="`ipkg_unsatisfied_dependences $pkg`"
- if [ -n "$remaining_deps" ]; then
- new_pkgs="$new_pkgs $pkg"
- ### echo "Dependences not satisfied for $pkg: $remaining_deps"
- if [ $curcheck -ne `echo $pkgs|wc -w` ]; then
- continue
- fi
- fi
-
- local filename=
- for src in `ipkg_src_names`; do
- if ipkg_require_list $src; then
- filename="`ipkg_extract_paragraph $pkg < $IPKG_LISTS_DIR/$src | ipkg_extract_field Filename | ipkg_extract_value`"
- [ -n "$filename" ] && break
- fi
- done
-
- if [ -z "$filename" ]; then
- echo "ipkg_get_install: ERROR: Cannot find package $pkg in $IPKG_LISTS_DIR"
- echo "ipkg_get_install: Check the spelling and maybe run \`ipkg update'."
- ipkg_status_remove_sd $sd $pkg
- return 1;
- fi
-
- [ -e "$IPKG_TMP" ] || mkdir -p $IPKG_TMP
-
- echo ""
- local tmp_pkg_file="$IPKG_TMP/"`ipkg_file_part $filename`
- if ! ipkg_download `ipkg_src_byname $src`/$filename $tmp_pkg_file; then
- echo "ipkg_get_install: Perhaps you need to run \`ipkg update'?"
- return 1
- fi
-
- if ! ipkg_install_file_dest $dest $tmp_pkg_file; then
- echo "ipkg_get_install: ERROR: Failed to install $tmp_pkg_file"
- echo "ipkg_get_install: I'll leave it there for you to try a manual installation"
- return 1
- fi
-
- ipkg_set_installed $pkg
- pkgs_installed="`expr $pkgs_installed + 1`"
- rm $tmp_pkg_file
- done
- ### echo "Installed $pkgs_installed package(s) this round"
- if [ $pkgs_installed -eq 0 ]; then
- if [ -z "$new_pkgs" ]; then
- break
- fi
- fi
- pkgs_installed=0
- pkgs="$new_pkgs"
- new_pkgs=
- curcheck=0
- done
-}
-
-ipkg_get_install() {
- ipkg_get_install_dest $IPKG_ROOT $*
-}
-
-ipkg_install_file_dest() {
- local dest="$1"
- local filename="$2"
- local sd=$dest/$IPKG_DIR_PREFIX
- local info_dir=$sd/info
-
- if [ ! -f "$filename" ]; then
- echo "ipkg_install_file: ERROR: File $filename not found"
- return 1
- fi
-
- local pkg="`ipkg_file_part $filename | sed 's/\([a-z0-9.+-]\+\)_.*/\1/'`"
- local ext="`echo $filename | sed 's/.*\.//'`"
- local pkg_extract_stdout
- if [ "$ext" = "ipk" ]; then
- pkg_extract_stdout="tar -xzOf"
- elif [ "$ext" = "deb" ]; then
- pkg_extract_stdout="ar p"
- else
- echo "ipkg_install_file: ERROR: File $filename has unknown extension $ext (not .ipk or .deb)"
- return 1
- fi
-
- # Check dependencies
- local depends="`ipkg_depends $pkg | sed -e "s/\<$pkg\>//"`"
-
- # Don't worry about deps that are scheduled for installation
- local missing_deps=
- for dep in $depends; do
- if ! ipkg_status_all $dep | grep -q 'Status:[[:space:]]install'; then
- missing_deps="$missing_deps $dep"
- fi
- done
-
- if [ ! -z "$missing_deps" ]; then
- if [ -n "$FORCE_DEPENDS" ]; then
- echo "ipkg_install_file: Warning: $pkg depends on the following uninstalled programs: $missing_deps"
- else
- echo "ipkg_install_file: ERROR: $pkg depends on the following uninstalled programs:
- $missing_deps"
- echo "ipkg_install_file: You may want to use \`ipkg install' to install these."
- return 1
- fi
- fi
-
- mkdir -p $IPKG_TMP/$pkg/control
- mkdir -p $IPKG_TMP/$pkg/data
- mkdir -p $info_dir
-
- if ! $pkg_extract_stdout $filename ./control.tar.gz | (cd $IPKG_TMP/$pkg/control; tar -xzf - ) ; then
- echo "ipkg_install_file: ERROR unpacking control.tar.gz from $filename"
- return 1
- fi
-
- if [ -n "$IPKG_OFFLINE_ROOT" ]; then
- if grep -q '^InstallsOffline:[[:space:]]*no' $IPKG_TMP/$pkg/control/control; then
- echo "*** Warning: Package $pkg may not be installed in offline mode"
- echo "*** Warning: Scheduling $filename for pending installation (installing into $IPKG_PENDING_DIR)"
- echo "Package: $pkg
-Status: install ok pending" | ipkg_status_update_sd $sd $pkg
- mkdir -p $IPKG_PENDING_DIR
- cp $filename $IPKG_PENDING_DIR
- rm -r $IPKG_TMP/$pkg/control
- rm -r $IPKG_TMP/$pkg/data
- rmdir $IPKG_TMP/$pkg
- return 0
- fi
- fi
-
-
- echo -n "Unpacking $pkg..."
- set +o noglob
- for file in $IPKG_TMP/$pkg/control/*; do
- local base_file="`ipkg_file_part $file`"
- mv $file $info_dir/$pkg.$base_file
- done
- set -o noglob
- rm -r $IPKG_TMP/$pkg/control
-
- if ! $pkg_extract_stdout $filename ./data.tar.gz | (cd $IPKG_TMP/$pkg/data; tar -xzf - ) ; then
- echo "ipkg_install_file: ERROR unpacking data.tar.gz from $filename"
- return 1
- fi
- echo "Done."
-
- echo -n "Configuring $pkg..."
- export PKG_ROOT=$dest
- if [ -x "$info_dir/$pkg.preinst" ]; then
- if ! $info_dir/$pkg.preinst install; then
- echo "$info_dir/$pkg.preinst failed. Aborting installation of $pkg"
- rm -rf $IPKG_TMP/$pkg/data
- rmdir $IPKG_TMP/$pkg
- return 1
- fi
- fi
-
- local old_conffiles="`ipkg_status_sd $sd $pkg Conffiles | ipkg_extract_value`"
- local new_conffiles=
- if [ -f "$info_dir/$pkg.conffiles" ]; then
- for conffile in `cat $info_dir/$pkg.conffiles`; do
- if [ -f "$dest/$conffile" ] && ! echo " $old_conffiles " | grep -q " $conffile "`md5sum $dest/$conffile | sed 's/ .*//'`; then
- local use_maintainers_conffile=
- if [ -z "$FORCE_DEFAULTS" ]; then
- while true; do
- echo -n "Configuration file \`$conffile'
- ==> File on system created by you or by a script.
- ==> File also in package provided by package maintainer.
- What would you like to do about it ? Your options are:
- Y or I : install the package maintainer's version
- N or O : keep your currently-installed version
- D : show the differences between the versions (if diff is installed)
- The default action is to keep your current version.
-*** `ipkg_file_part $conffile` (Y/I/N/O/D) [default=N] ? "
- read response
- case "$response" in
- [YyIi] | [Yy][Ee][Ss])
- use_maintainers_conffile=t
- break
- ;;
- [Dd])
- echo "
-diff -u $dest/$conffile $IPKG_TMP/$pkg/data/$conffile"
- diff -u $dest/$conffile $IPKG_TMP/$pkg/data/$conffile || true
- echo "[Press ENTER to continue]"
- read junk
- ;;
- *)
- break
- ;;
- esac
- done
- fi
- if [ -n "$use_maintainers_conffile" ]; then
- local md5sum="`md5sum $IPKG_TMP/$pkg/data/$conffile | sed 's/ .*//'`"
- new_conffiles="$new_conffiles $conffile $md5sum"
- else
- new_conffiles="$new_conffiles $conffile <custom>"
- rm $IPKG_TMP/$pkg/data/$conffile
- fi
- else
- md5sum="`md5sum $IPKG_TMP/$pkg/data/$conffile | sed 's/ .*//'`"
- new_conffiles="$new_conffiles $conffile $md5sum"
- fi
- done
- fi
-
- local owd="`pwd`"
- (cd $IPKG_TMP/$pkg/data/; tar cf - . | (cd $owd; cd $dest; tar xf -))
- rm -rf $IPKG_TMP/$pkg/data
- rmdir $IPKG_TMP/$pkg
- $pkg_extract_stdout $filename ./data.tar.gz | tar tzf - | sed -e 's/^\.//' > $info_dir/$pkg.list
-
- if [ -x "$info_dir/$pkg.postinst" ]; then
- $info_dir/$pkg.postinst configure
- fi
-
- if [ -n "$new_conffiles" ]; then
- new_conffiles='Conffiles: '`echo $new_conffiles | ipkg_protect_slashes`
- fi
- local sed_safe_root="`echo $dest | sed -e "s/^${IPKG_OFFLINE_ROOT}//" | ipkg_protect_slashes`"
- sed -e "s/\(Package:.*\)/\1\\
-Status: install ok installed\\
-Root: ${sed_safe_root}\\
-${new_conffiles}/" $info_dir/$pkg.control | ipkg_status_update_sd $sd $pkg
-
- rm -f $info_dir/$pkg.control
- rm -f $info_dir/$pkg.conffiles
- rm -f $info_dir/$pkg.preinst
- rm -f $info_dir/$pkg.postinst
-
- echo "Done."
-}
-
-ipkg_install_file() {
- ipkg_install_file_dest $IPKG_ROOT $*
-}
-
-ipkg_install() {
-
- while [ $# -gt 0 ]; do
- local pkg="$1"
- shift
-
- case "$pkg" in
- http://* | ftp://*)
- local tmp_pkg_file="$IPKG_TMP/"`ipkg_file_part $pkg`
- if ipkg_download $pkg $tmp_pkg_file; then
- ipkg_install_file $tmp_pkg_file
- rm $tmp_pkg_file
- fi
- ;;
- file:/*.ipk | file://*.deb)
- local ipkg_filename="`echo $pkg|sed 's/^file://'`"
- ipkg_install_file $ipkg_filename
- ;;
- *.ipk | *.deb)
- if [ -f "$pkg" ]; then
- ipkg_install_file $pkg
- else
- echo "File not found $pkg" >&2
- fi
- ;;
- *)
- ipkg_get_install $pkg || true
- ;;
- esac
- done
-}
-
-ipkg_install_pending() {
- [ -n "$IPKG_OFFLINE_ROOT" ] && return 0
-
- if [ -d "$IPKG_PENDING_DIR" ]; then
- set +o noglob
- local pending="`ls -1d $IPKG_PENDING_DIR/*.ipk 2> /dev/null`" || true
- set -o noglob
- if [ -n "$pending" ]; then
- echo "The following packages in $IPKG_PENDING_DIR will now be installed:"
- echo $pending
- for filename in $pending; do
- if ipkg_install_file $filename; then
- rm $filename
- fi
- done
- fi
- fi
- return 0
-}
-
-ipkg_install_wanted() {
- local wanted="`ipkg_status_matching 'Status:[[:space:]]*install.*not-installed'`"
-
- if [ -n "$wanted" ]; then
- echo "The following package were previously requested but have not been installed:"
- echo $wanted
-
- if [ -n "$FORCE_DEFAULTS" ]; then
- echo "Installing them now."
- else
- echo -n "Install them now [Y/n] ? "
- read response
- case "$response" in
- [Nn] | [Nn][Oo])
- return 0
- ;;
- esac
- fi
-
- ipkg_install $wanted
- fi
-
- return 0
-}
-
-ipkg_upgrade_pkg() {
- local pkg="$1"
- local avail_ver="`ipkg_info $pkg Version | ipkg_extract_value | head -1`"
-
- is_installed=
- for dest_name in `ipkg_dest_names`; do
- local dest="`ipkg_dest_byname $dest_name`"
- local sd=$dest/$IPKG_DIR_PREFIX
- local inst_ver="`ipkg_status_sd $sd $pkg Version | ipkg_extract_value`"
- if [ -n "$inst_ver" ]; then
- is_installed=t
-
- if [ -z "$avail_ver" ]; then
- echo "Assuming locally installed package $pkg ($inst_ver) is up to date"
- return 0
- fi
-
- if [ "$avail_ver" = "$inst_ver" ]; then
- echo "Package $pkg ($inst_ver) installed in $dest_name is up to date"
- elif ipkg_is_upgrade "$avail_ver" "$inst_ver"; then
- echo "Upgrading $pkg ($dest_name) from $inst_ver to $avail_ver"
- ipkg_get_install_dest $dest $pkg
- else
- echo "Not downgrading package $pkg from $inst_ver to $avail_ver"
- fi
- fi
- done
-
- if [ -z "$is_installed" ]; then
- echo "Package $pkg does not appear to be installed"
- return 0
- fi
-
-}
-
-ipkg_upgrade() {
- if [ $# -lt 1 ]; then
- local pkgs="`ipkg_status_matching 'Status:.*[[:space:]]installed'`"
- else
- pkgs="$*"
- fi
-
- for pkg in $pkgs; do
- ipkg_upgrade_pkg $pkg
- done
-}
-
-ipkg_remove_pkg_dest() {
- local dest="$1"
- local pkg="$2"
- local sd=$dest/$IPKG_DIR_PREFIX
- local info_dir=$sd/info
-
- if ! ipkg_status_installed_sd $sd $pkg; then
- echo "ipkg_remove: Package $pkg does not appear to be installed in $dest"
- if ipkg_status_mentioned_sd $sd $pkg; then
- echo "Purging mention of $pkg from the ipkg database"
- ipkg_status_remove_sd $sd $pkg
- fi
- return 1
- fi
-
- echo "ipkg_remove: Removing $pkg... "
-
- local files="`cat $info_dir/$pkg.list`"
-
- export PKG_ROOT=$dest
- if [ -x "$info_dir/$pkg.prerm" ]; then
- $info_dir/$pkg.prerm remove
- fi
-
- local conffiles="`ipkg_status_sd $sd $pkg Conffiles | ipkg_extract_value`"
-
- local dirs_to_remove=
- for file in $files; do
- if [ -d "$dest/$file" ]; then
- dirs_to_remove="$dirs_to_remove $dest/$file"
- else
- if echo " $conffiles " | grep -q " $file "; then
- if echo " $conffiles " | grep -q " $file "`md5sum $dest/$file | sed 's/ .*//'`; then
- rm -f $dest/$file
- fi
- else
- rm -f $dest/$file
- fi
- fi
- done
-
- local removed_a_dir=t
- while [ -n "$removed_a_dir" ]; do
- removed_a_dir=
- local new_dirs_to_remove=
- for dir in $dirs_to_remove; do
- if rmdir $dir >/dev/null 2>&1; then
- removed_a_dir=t
- else
- new_dirs_to_remove="$new_dirs_to_remove $dir"
- fi
- done
- dirs_to_remove="$new_dirs_to_remove"
- done
-
- if [ -n "$dirs_to_remove" ]; then
- echo "ipkg_remove: Warning: Not removing the following directories since they are not empty:" >&2
- echo "$dirs_to_remove" | sed -e 's/\/[/]\+/\//g' >&2
- fi
-
- if [ -x "$info_dir/$pkg.postrm" ]; then
- $info_dir/$pkg.postrm remove
- fi
-
- ipkg_status_remove_sd $sd $pkg
- set +o noglob
- rm -f $info_dir/$pkg.*
- set -o noglob
-
- echo "Done."
-}
-
-ipkg_remove_pkg() {
- local pkg="$1"
- for dest in `ipkg_dests_all`; do
- local sd=$dest/$IPKG_DIR_PREFIX
- if ipkg_status_mentioned_sd $sd $pkg; then
- ipkg_remove_pkg_dest $dest $pkg
- fi
- done
-}
-
-ipkg_remove() {
- while [ $# -gt 0 ]; do
- local pkg="$1"
- shift
- if [ -n "$DEST_NAME" ]; then
- ipkg_remove_pkg_dest $IPKG_ROOT $pkg
- else
- ipkg_remove_pkg $pkg
- fi
- done
-}
-
-###########
-# ipkg main
-###########
-
-# Parse options
-while [ $# -gt 0 ]; do
- arg="$1"
- case $arg in
- -d | -dest)
- [ $# -gt 1 ] || ipkg_usage "option $arg requires an argument"
- DEST_NAME="$2"
- shift
- ;;
- -o | -offline)
- [ $# -gt 1 ] || ipkg_usage "option $arg requires an argument"
- IPKG_OFFLINE_ROOT="$2"
- shift
- ;;
- -force-depends)
- FORCE_DEPENDS=t
- ;;
- -force-defaults)
- FORCE_DEFAULTS=t
- ;;
- -*)
- ipkg_usage "unknown option $arg"
- ;;
- *)
- break
- ;;
- esac
- shift
-done
-
-[ $# -lt 1 ] && ipkg_usage "ipkg must have one sub-command argument"
-cmd="$1"
-shift
-
-ipkg_load_configuration
-mkdir -p /tmp/ipkg
-
-case "$cmd" in
-update|upgrade|list|info|status|install_pending)
- ;;
-install|depends|remove|files|search)
- [ $# -lt 1 ] && ipkg_usage "ERROR: the \`\`$cmd'' command requires an argument"
- ;;
-*)
- echo "ERROR: unknown sub-command \`$cmd'"
- ipkg_usage
- ;;
-esac
-
-# Only install pending if we have an interactive sub-command
-case "$cmd" in
-upgrade|install)
- ipkg_install_pending
- ipkg_install_wanted
- ;;
-esac
-
-ipkg_$cmd $*
-for a in `ls $IPKG_TMP`; do
- rm -rf $IPKG_TMP/$a
-done
+++ /dev/null
-#!/bin/sh
-exec ash --login
+++ /dev/null
-# filter what we send upstream
-domain-needed
-bogus-priv
-filterwin2k
-
-# allow /etc/hosts and dhcp lookups via *.lan
-local=/lan/
-domain=lan
-
-# no dns queries from the wan
-except-interface=vlan1
-
-# enable dhcp (start,end,netmask,leasetime)
-dhcp-range=192.168.1.100,192.168.1.250,255.255.255.0,12h
-dhcp-leasefile=/tmp/dhcp.leases
-
-# allow a /etc/ethers for static hosts
-read-ethers
-
-# other useful options:
-# default route(s): dhcp-option=3,192.168.1.1,192.168.1.2
-# dns server(s): dhcp-option=6,192.168.1.1,192.168.1.2
+++ /dev/null
-#!/bin/ash
-
-alias debug=${DEBUG:-:}
-
-# allow env to override nvram
-nvram_get () {
- eval "echo \${$1:-\$(nvram get $1)}"
-}
-. /etc/nvram.overrides
-
-# valid interface?
-if_valid () (
- [ "${1%%[0-9]}" = "vlan" ] && {
- i=${1#vlan}
- hwname=$(nvram_get vlan${i}hwname)
- hwaddr=$(nvram_get ${hwname}macaddr)
- [ -z "$hwaddr" ] && return 1
-
- vif=$(ifconfig -a | awk '/^eth.*'$hwaddr'/ {print $1; exit}' IGNORECASE=1)
- debug "# vlan$i: $hwname $hwaddr => $vif"
-
- $DEBUG ifconfig $vif up
- $DEBUG vconfig add $vif $i 2>/dev/null
- }
- ifconfig "$1" >/dev/null 2>&1 || [ "${1%%[0-9]}" = "br" ]
-)
+++ /dev/null
-#!/bin/sh
-sysctl -p
-echo "S" > /proc/jffs2_bbc
-
-mkdir -p /var/run
-
-# networking stub
-[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
- # force unique wireless mac
- nvram set il0macaddr=$(nvram get et0macaddr|
- awk '{OFS=FS=":";for(x=6,y=2;x;x--){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-}
-
-insmod et
-insmod wl
-
-ifconfig lo 127.0.0.1 up
-ifconfig eth0 promisc
-
-HOSTNAME=$(nvram get wan_hostname)
-DOMAINNAME=${HOSTNAME##*.}
-HOSTNAME=${HOSTNAME%%.*}
-
-echo ${HOSTNAME:=OpenWrt} > /proc/sys/kernel/hostname
-echo ${DOMAINNAME:=lan} > /proc/sys/kernel/domainname
-
-vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+++ /dev/null
-#!/bin/sh
-. /etc/functions.sh
-case "$1" in
- start|restart)
- ifup lan
- ifup wan
- ifup wifi
- wifi up
-
- for route in $(nvram_get static_route); do {
- eval "set $(echo $route | sed 's/:/ /g')"
- route add -net $1 netmask $2 gw $3 metric $4 dev $5
- } done
- ;;
-esac
+++ /dev/null
-#!/bin/sh
-. /etc/functions.sh
-
-WAN=$(nvram_get wan_ifname)
-
-IPT=/usr/sbin/iptables
-
-for T in filter nat mangle ; do
- $IPT -t $T -F
- $IPT -t $T -X
-done
-
-$IPT -t filter -A INPUT -m state --state INVALID -j DROP
-$IPT -t filter -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-$IPT -t filter -A INPUT -p icmp -j ACCEPT
-$IPT -t filter -A INPUT -i $WAN -p tcp -j REJECT --reject-with tcp-reset
-$IPT -t filter -A INPUT -i $WAN -j REJECT --reject-with icmp-port-unreachable
-$IPT -t filter -A FORWARD -m state --state INVALID -j DROP
-$IPT -t filter -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-$IPT -t filter -A FORWARD -i $WAN -m state --state NEW,INVALID -j DROP
-$IPT -t filter -A FORWARD -o $WAN -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-
-$IPT -t nat -A POSTROUTING -o $WAN -j MASQUERADE
+++ /dev/null
-#!/bin/sh
-/usr/sbin/telnetd -l /bin/login
-/usr/sbin/httpd -p 80 -h /www -r WRT54G Router
-/usr/sbin/dnsmasq
+++ /dev/null
-#!/bin/sh
-[ -z "$FAILSAFE" ] && {
- { mount | grep jffs2 1>&-; } || firstboot
-}
-# turn off DMZ led
-echo "0x00" > /proc/sys/diag
+++ /dev/null
-#!/bin/sh
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
- # Ignore dangling symlinks (if any).
- [ ! -f "$i" ] && continue
-
- case "$i" in
- *.sh)
- # Source shell script for speed.
- (
- trap - INT QUIT TSTP
- set start
- . $i
- )
- ;;
- *)
- # No sh extension, so fork subprocess.
- $i start
- ;;
- esac
-done
+++ /dev/null
-::sysinit:/etc/init.d/rcS
-::shutdown:/sbin/halt
-::respawn:/bin/login
+++ /dev/null
-src openwrt http://openwrt.ksilebo.net/ipkg
-dest root /
-dest ram /tmp
+++ /dev/null
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
-
+++ /dev/null
-# NVRAM overrides
-# This file handles the NVRAM quirks of various hardware
-# this is not a replacement for nvram.
-
-# linksys bug has lan doing dhcp; force static
-lan_proto="static"
-
-# failsafe if reset is held
-[ "$FAILSAFE" = "true" ] && {
- echo "### FAILSAFE MODE ####"
- lan_ifname="br0"
- lan_ifnames="vlan0 vlan2 eth1 eth2 eth3"
- lan_ipaddr="192.168.1.1"
- lan_netmask="255.255.255.0"
- lan_hwaddr="00:0B:AD:0A:DD:00"
- wan_ifname="none"
- wifi_ifname="none"
-}
-
-# hacks for 1.x hardware
-[ "$(nvram get boardnum)" = "42" ] && \
-[ "$(nvram get boardtype)" = "bcm94710dev" ] && {
- debug "### 1.x hardware hack ###"
- vlan1hwname="et0"
- vlan2hwname="et0"
-
- # we remap old device names to new
- # it's recommended that you continue to
- # use the old names to preserve backwards
- # compatibility
- remap () {
- eval $1=\"$(nvram_get $1 | awk 'gsub("eth0","vlan2") gsub("eth1","vlan1")')\"
- }
-
- remap lan_ifname
- remap lan_ifnames
- remap wifi_ifname
- remap wifi_ifnames
- remap wan_ifname
- remap wan_ifnames
- remap pppoe_ifname
-}
-
-[ -z "$(nvram_get lan_ifname)" ] && {
- lan_ifname="br0"
- lan_ifnames="vlan0 vlan2 eth1 eth2 eth3"
-}
-
-[ -z "$(nvram_get wan_ifname)" ] && {
- wan_ifname="vlan1"
- wan_proto="dhcp"
-}
+++ /dev/null
-#!/bin/sh
-mount none /proc -t proc
-insmod diag
-echo 0x01 > /proc/sys/diag
-sleep 1
-if /sbin/resetmon ; then
- mtd unlock mtd4
- mount -t jffs2 /dev/mtdblock/4 /jffs
- pivot_root /jffs /jffs/rom
- mount none /dev -t devfs
- mount none /proc -t proc
- umount rom/proc rom/dev
-else
- export FAILSAFE=true
-fi
-mount none /tmp -t ramfs
-exec /sbin/init
+++ /dev/null
-#!/bin/sh
-[ -f /etc/motd ] && cat /etc/motd
-
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin
-export PS1='\u@\h:\w\$ '
-
-alias less='more'
-alias vim='vi'
+++ /dev/null
-kernel.panic = 3
-net.ipv4.ip_forward = 1
-net.ipv4.icmp_echo_ignore_broadcasts = 1
-net.ipv4.icmp_ignore_bogus_error_responses = 1
-net.ipv4.tcp_fin_timeout = 30
-net.ipv4.tcp_keepalive_time = 120
-net.ipv4.tcp_timestamps = 0
+++ /dev/null
-#!/bin/sh
-/usr/bin/killall5 -9
-umount -ar
+++ /dev/null
-#!/bin/ash
-# $Id$
-[ "${INTERFACE%%[0-9]*}" = "wds" ] && {
- ifconfig $INTERFACE 0.0.0.0 up
- /usr/sbin/brctl addif br0 $INTERFACE
-}
+++ /dev/null
-#!/bin/ash
-. /etc/functions.sh
- type=$1
- debug "### ifdown $type ###"
- if=$(nvram_get ${type}_ifname)
- if_valid $if || return
- kill $(cat /var/run/${if}.pid 2>&-) 2>&-
- $DEBUG ifconfig $if down
+++ /dev/null
-#!/bin/ash
-. /etc/functions.sh
- type=$1
- debug "### ifup $type ###"
-
- if=$(nvram_get ${type}_ifname)
- if [ "${if%%[0-9]}" = "ppp" ]; then
- if=$(nvram_get pppoe_ifname)
- fi
-
- if_valid $if || return
-
- $DEBUG ifconfig $if down
- if [ "${if%%[0-9]}" = "br" ]; then
- stp=$(nvram_get ${type}_stp)
- $DEBUG brctl delbr $if
- $DEBUG brctl addbr $if
- $DEBUG brctl setfd $if 0
- $DEBUG brctl stp $if ${stp:-0}
- for sif in $(nvram_get ${type}_ifnames); do {
- if_valid $sif || continue
- $DEBUG ifconfig $sif 0.0.0.0 up
- $DEBUG brctl addif $if $sif
- } done
- fi
-
- mac=$(nvram_get ${type}_hwaddr)
- ${mac:+$DEBUG ifconfig $if hw ether $mac}
-
- if_proto=$(nvram_get ${type}_proto)
- case "$if_proto" in
- static)
- ip=$(nvram_get ${type}_ipaddr)
- netmask=$(nvram_get ${type}_netmask)
- gateway=$(nvram_get ${type}_gateway)
-
- $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
- ${gateway:+$DEBUG route add default gw $gateway}
-
- [ -f /etc/resolv.conf ] && return
-
- debug "# --- creating /etc/resolv.conf ---"
- for dns in $(nvram_get ${type}_dns); do {
- echo "nameserver $dns" >> /etc/resolv.conf
- } done
- ;;
- dhcp)
- pidfile=/tmp/dhcp-${type}.pid
- if [ -f $pidfile ]; then
- $DEBUG kill $(cat $pidfile)
- fi
- ${DEBUG:-eval} "udhcpc -i $if -b -p $pidfile &"
- ;;
- pppoe)
- username=$(nvram_get ppp_username)
- password=$(nvram_get ppp_passwd)
- redial=$(nvram_get ppp_redialperiod)
- idletime=$(nvram_get ppp_idletime)
- mtu=$(nvram_get wan_mtu)
-
- $DEBUG ifconfig $if 0.0.0.0 up
-
- $DEBUG /sbin/pppoecd $if -u $username -p $password \
- -i 0 -I $redial -T $idletime -t $mtu -k
- ;;
- none)
- ;;
- *)
- echo "### WARNING $if: $if_proto is not supported"
- ;;
- esac
+++ /dev/null
-#!/bin/ash
- alias debug=${DEBUG:-:}
- debug "### wifi $1 ###"
- if=$(awk 'sub(":","") {print $1}' /proc/net/wireless)
- $DEBUG wlconf $if $1
+++ /dev/null
-#!/bin/sh
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-# (slightly modified)
-
-[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
-
-RESOLV_CONF="/tmp/resolv.conf"
-
-case "$1" in
- deconfig)
- ifconfig $interface 0.0.0.0
- ;;
-
- renew|bound)
- ifconfig $interface $ip \
- ${broadcast:+broadcast $broadcast} \
- ${subnet:+netmask $subnet}
-
- if [ -n "$router" ] ; then
- echo "deleting routers"
- while route del default gw 0.0.0.0 dev $interface ; do
- :
- done
-
- for i in $router ; do
- route add default gw $i dev $interface
- done
- fi
-
- echo -n > $RESOLV_CONF
- ${domain:+echo search $domain >> $RESOLV_CONF}
- for i in $dns ; do
- echo adding dns $i
- echo nameserver $i >> $RESOLV_CONF
- done
- ;;
-esac
-exit 0
+++ /dev/null
-<HTML>
-<HEAD><TITLE>OpenWrt</TITLE></HEAD>
-<BODY>
-No webpages currently available
-<br>- perhaps you need to install a package?
-</BODY>
-</HTML>
projects / openwrt.git / commitdiff