ar71xx: add mdio bus driver for the rtl8366 switch
authorjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Tue, 8 Dec 2009 10:29:35 +0000 (10:29 +0000)
committerjuhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Tue, 8 Dec 2009 10:29:35 +0000 (10:29 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18694 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar71xx/config-2.6.28
target/linux/ar71xx/config-2.6.30
target/linux/ar71xx/config-2.6.31
target/linux/ar71xx/config-2.6.32
target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c [new file with mode: 0644]
target/linux/ar71xx/files/include/linux/rtl8366_smi.h [new file with mode: 0644]
target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch [new file with mode: 0644]

index b155259..8358790 100644 (file)
@@ -162,6 +162,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_R6040 is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
index 0db13af..3cedfdc 100644 (file)
@@ -166,6 +166,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
index 2e4a56b..0615a50 100644 (file)
@@ -169,6 +169,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
index dcca7d2..f1a69bc 100644 (file)
@@ -173,6 +173,7 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366_SMI=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
diff --git a/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c b/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c
new file mode 100644 (file)
index 0000000..e43f8a2
--- /dev/null
@@ -0,0 +1,661 @@
+/*
+ * Platform driver for the Realtek RTL8366 ethernet switch
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/rtl8366_smi.h>
+
+//#define DEBUG        1
+
+#define RTL8366_SMI_DRIVER_NAME        "rtl8366-smi"
+#define RTL8366_SMI_DRIVER_DESC        "Realtek RTL8366 switch driver"
+#define RTL8366_SMI_DRIVER_VER "0.1.0"
+
+#define RTL8366S_PHY_NO_MAX            4
+#define RTL8366S_PHY_PAGE_MAX          7
+#define RTL8366S_PHY_ADDR_MAX          31
+
+#define RTL8366S_CHIP_VERSION_CTRL_REG 0x0104
+#define RTL8366S_CHIP_VERSION_MASK     0xf
+#define RTL8366S_CHIP_ID_REG           0x0105
+#define RTL8366S_CHIP_ID_8366          0x8366
+
+/* PHY registers control */
+#define RTL8366S_PHY_ACCESS_CTRL_REG   0x8028
+#define RTL8366S_PHY_ACCESS_DATA_REG   0x8029
+
+#define RTL8366S_PHY_CTRL_READ         1
+#define RTL8366S_PHY_CTRL_WRITE                0
+
+#define RTL8366S_PHY_REG_MASK          0x1f
+#define RTL8366S_PHY_PAGE_OFFSET       5
+#define RTL8366S_PHY_PAGE_MASK         (0x7 << 5)
+#define RTL8366S_PHY_NO_OFFSET         9
+#define RTL8366S_PHY_NO_MASK           (0x1f << 9)
+
+#define RTL8366_SMI_ACK_RETRY_COUNT    5
+#define RTL8366_SMI_CLK_DELAY          10 /* nsec */
+
+struct rtl8366_smi {
+       struct platform_device                  *pdev;
+       struct rtl8366_smi_platform_data        *pdata;
+       spinlock_t                              lock;
+       struct mii_bus                          *mii_bus;
+       int                                     mii_irq[PHY_MAX_ADDR];
+};
+
+static inline void rtl8366_smi_clk_delay(struct rtl8366_smi *smi)
+{
+       ndelay(RTL8366_SMI_CLK_DELAY);
+}
+
+static void rtl8366_smi_start(struct rtl8366_smi *smi)
+{
+       unsigned int sda = smi->pdata->gpio_sda;
+       unsigned int sck = smi->pdata->gpio_sck;
+
+       /*
+        * Set GPIO pins to output mode, with initial state:
+        * SCK = 0, SDA = 1
+        */
+       gpio_direction_output(sck, 0);
+       gpio_direction_output(sda, 1);
+       rtl8366_smi_clk_delay(smi);
+
+       /* CLK 1: 0 -> 1, 1 -> 0 */
+       gpio_set_value(sck, 1);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 0);
+       rtl8366_smi_clk_delay(smi);
+
+       /* CLK 2: */
+       gpio_set_value(sck, 1);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sda, 0);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 0);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sda, 1);
+}
+
+static void rtl8366_smi_stop(struct rtl8366_smi *smi)
+{
+       unsigned int sda = smi->pdata->gpio_sda;
+       unsigned int sck = smi->pdata->gpio_sck;
+
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sda, 0);
+       gpio_set_value(sck, 1);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sda, 1);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 1);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 0);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 1);
+
+       /* add a click */
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 0);
+       rtl8366_smi_clk_delay(smi);
+       gpio_set_value(sck, 1);
+
+       /* set GPIO pins to input mode */
+       gpio_direction_input(sda);
+       gpio_direction_input(sck);
+}
+
+static void rtl8366_smi_write_bits(struct rtl8366_smi *smi, u32 data, u32 len)
+{
+       unsigned int sda = smi->pdata->gpio_sda;
+       unsigned int sck = smi->pdata->gpio_sck;
+
+       for (; len > 0; len--) {
+               rtl8366_smi_clk_delay(smi);
+
+               /* prepare data */
+               if ( data & ( 1 << (len - 1)) )
+                       gpio_set_value(sda, 1);
+               else
+                       gpio_set_value(sda, 0);
+               rtl8366_smi_clk_delay(smi);
+
+               /* clocking */
+               gpio_set_value(sck, 1);
+               rtl8366_smi_clk_delay(smi);
+               gpio_set_value(sck, 0);
+       }
+}
+
+static void rtl8366_smi_read_bits(struct rtl8366_smi *smi, u32 len, u32 *data)
+{
+       unsigned int sda = smi->pdata->gpio_sda;
+       unsigned int sck = smi->pdata->gpio_sck;
+
+       gpio_direction_input(sda);
+
+       for (*data = 0; len > 0; len--) {
+               u32 u;
+
+               rtl8366_smi_clk_delay(smi);
+
+               /* clocking */
+               gpio_set_value(sck, 1);
+               rtl8366_smi_clk_delay(smi);
+               u = gpio_get_value(sda);
+               gpio_set_value(sck, 0);
+
+               *data |= (u << (len - 1));
+       }
+
+       gpio_direction_output(sda, 0);
+}
+
+static int rtl8366_smi_wait_for_ack(struct rtl8366_smi *smi)
+{
+       int retry_cnt;
+
+       retry_cnt = 0;
+       do {
+               u32 ack;
+
+               rtl8366_smi_read_bits(smi, 1, &ack);
+               if (ack == 0)
+                       break;
+
+               if (++retry_cnt > RTL8366_SMI_ACK_RETRY_COUNT)
+                       return -EIO;
+       } while (1);
+
+       return 0;
+}
+
+static int rtl8366_smi_write_byte(struct rtl8366_smi *smi, u8 data)
+{
+       rtl8366_smi_write_bits(smi, data, 8);
+       return rtl8366_smi_wait_for_ack(smi);
+}
+
+static int rtl8366_smi_read_byte0(struct rtl8366_smi *smi, u8 *data)
+{
+       u32 t;
+
+       /* read data */
+       rtl8366_smi_read_bits(smi, 8, &t);
+       *data = (t & 0xff);
+
+       /* send an ACK */
+       rtl8366_smi_write_bits(smi, 0x00, 1);
+
+       return 0;
+}
+
+static int rtl8366_smi_read_byte1(struct rtl8366_smi *smi, u8 *data)
+{
+       u32 t;
+
+       /* read data */
+       rtl8366_smi_read_bits(smi, 8, &t);
+       *data = (t & 0xff);
+
+       /* send an ACK */
+       rtl8366_smi_write_bits(smi, 0x01, 1);
+
+       return 0;
+}
+
+static int rtl8366_smi_read_reg(struct rtl8366_smi *smi, u32 addr, u32 *data)
+{
+       unsigned long flags;
+       u8 lo = 0;
+       u8 hi = 0;
+       int ret;
+
+       spin_lock_irqsave(&smi->lock, flags);
+
+       rtl8366_smi_start(smi);
+
+       /* send READ command */
+       ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x01);
+       if (ret)
+               goto out;
+
+       /* set ADDR[7:0] */
+       ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+       if (ret)
+               goto out;
+
+       /* set ADDR[15:8] */
+       ret = rtl8366_smi_write_byte(smi, addr >> 8);
+       if (ret)
+               goto out;
+
+       /* read DATA[7:0] */
+       rtl8366_smi_read_byte0(smi, &lo);
+       /* read DATA[15:8] */
+       rtl8366_smi_read_byte1(smi, &hi);
+
+       *data = ((u32) lo) | (((u32) hi) << 8);
+
+       ret = 0;
+
+ out:
+       rtl8366_smi_stop(smi);
+       spin_unlock_irqrestore(&smi->lock, flags);
+
+       return ret;
+}
+
+static int rtl8366_smi_write_reg(struct rtl8366_smi *smi, u32 addr, u32 data)
+{
+       unsigned long flags;
+       int ret;
+
+       spin_lock_irqsave(&smi->lock, flags);
+
+       rtl8366_smi_start(smi);
+
+       /* send WRITE command */
+       ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x00);
+       if (ret)
+               goto out;
+
+       /* set ADDR[7:0] */
+       ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+       if (ret)
+               goto out;
+
+       /* set ADDR[15:8] */
+       ret = rtl8366_smi_write_byte(smi, addr >> 8);
+       if (ret)
+               goto out;
+
+       /* write DATA[7:0] */
+       ret = rtl8366_smi_write_byte(smi, data & 0xff);
+       if (ret)
+               goto out;
+
+       /* write DATA[15:8] */
+       ret = rtl8366_smi_write_byte(smi, data >> 8);
+       if (ret)
+               goto out;
+
+       ret = 0;
+
+ out:
+       rtl8366_smi_stop(smi);
+       spin_unlock_irqrestore(&smi->lock, flags);
+
+       return ret;
+}
+
+static int rtl8366_smi_read_phy_reg(struct rtl8366_smi *smi,
+                                   u32 phy_no, u32 page, u32 addr, u32 *data)
+{
+       u32 reg;
+       int ret;
+
+       if (phy_no > RTL8366S_PHY_NO_MAX)
+               return -EINVAL;
+
+       if (page > RTL8366S_PHY_PAGE_MAX)
+               return -EINVAL;
+
+       if (addr > RTL8366S_PHY_ADDR_MAX)
+               return -EINVAL;
+
+       ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+                                   RTL8366S_PHY_CTRL_READ);
+       if (ret)
+               return ret;
+
+       reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+             ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+             (addr & RTL8366S_PHY_REG_MASK);
+
+       ret = rtl8366_smi_write_reg(smi, reg, 0);
+       if (ret)
+               return ret;
+
+       ret = rtl8366_smi_read_reg(smi, RTL8366S_PHY_ACCESS_DATA_REG, data);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+static int rtl8366_smi_write_phy_reg(struct rtl8366_smi *smi,
+                                    u32 phy_no, u32 page, u32 addr, u32 data)
+{
+       u32 reg;
+       int ret;
+
+       if (phy_no > RTL8366S_PHY_NO_MAX)
+               return -EINVAL;
+
+       if (page > RTL8366S_PHY_PAGE_MAX)
+               return -EINVAL;
+
+       if (addr > RTL8366S_PHY_ADDR_MAX)
+               return -EINVAL;
+
+       ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+                                   RTL8366S_PHY_CTRL_WRITE);
+       if (ret)
+               return ret;
+
+       reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+             ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+             (addr & RTL8366S_PHY_REG_MASK);
+
+       ret = rtl8366_smi_write_reg(smi, reg, data);
+       if (ret)
+               return ret;
+
+       return 0;
+}
+
+#ifdef DEBUG
+static void rtl8366_smi_dump_regs(struct rtl8366_smi *smi)
+{
+       u32 t;
+       int err;
+       int i;
+
+       for (i = 0; i < 0x200; i++) {
+               err = rtl8366_smi_read_reg(smi, i, &t);
+               if (err) {
+                       dev_err(&smi->pdev->dev,
+                               "unable to read register %04x\n", i);
+                       return;
+               }
+               dev_info(&smi->pdev->dev, "reg %04x: %04x\n", i, t);
+       }
+
+       for (i = 0; i <= RTL8366S_PHY_NO_MAX; i++) {
+               int j;
+
+               for (j = 0; j <= RTL8366S_PHY_ADDR_MAX; j++) {
+                       err = rtl8366_smi_read_phy_reg(smi, i, 0, j, &t);
+                       if (err) {
+                               dev_err(&smi->pdev->dev,
+                                       "unable to read PHY%u:%02x register\n",
+                                       i, j);
+                               return;
+                       }
+                       dev_info(&smi->pdev->dev,
+                                "PHY%u:%02x: %04x\n", i, j, t);
+               }
+       }
+}
+#else
+static inline void rtl8366_smi_dump_regs(struct rtl8366_smi *smi) {}
+#endif
+
+static int rtl8366_smi_mii_read(struct mii_bus *bus, int addr, int reg)
+{
+       struct rtl8366_smi *smi = bus->priv;
+       u32 val = 0;
+       int err;
+
+       err = rtl8366_smi_read_phy_reg(smi, addr, 0, reg, &val);
+       if (err)
+               return 0xffff;
+
+       return val;
+}
+
+static int rtl8366_smi_mii_write(struct mii_bus *bus, int addr, int reg,
+                                    u16 val)
+{
+       struct rtl8366_smi *smi = bus->priv;
+       u32 t;
+       int err;
+
+       err = rtl8366_smi_write_phy_reg(smi, addr, 0, reg, val);
+       /* flush write */
+       (void) rtl8366_smi_read_phy_reg(smi, addr, 0, reg, &t);
+
+       return err;
+}
+
+static int rtl8366_smi_mii_init(struct rtl8366_smi *smi)
+{
+       int ret;
+       int i;
+
+       smi->mii_bus = mdiobus_alloc();
+       if (smi->mii_bus == NULL) {
+               ret = -ENOMEM;
+               goto err;
+       }
+
+       spin_lock_init(&smi->lock);
+       smi->mii_bus->priv = (void *) smi;
+       smi->mii_bus->name = "rtl8366-smi";
+       smi->mii_bus->read = rtl8366_smi_mii_read;
+       smi->mii_bus->write = rtl8366_smi_mii_write;
+       snprintf(smi->mii_bus->id, MII_BUS_ID_SIZE, "%s",
+                       dev_name(&smi->pdev->dev));
+       smi->mii_bus->parent = &smi->pdev->dev;
+       smi->mii_bus->phy_mask = ~(0x1f);
+       smi->mii_bus->irq = smi->mii_irq;
+       for (i = 0; i < PHY_MAX_ADDR; i++)
+               smi->mii_irq[i] = PHY_POLL;
+
+       rtl8366_smi_dump_regs(smi);
+
+       ret = mdiobus_register(smi->mii_bus);
+       if (ret)
+               goto err_free;
+
+       rtl8366_smi_dump_regs(smi);
+
+       return 0;
+
+ err_free:
+       mdiobus_free(smi->mii_bus);
+ err:
+       return ret;
+}
+
+static void rtl8366_smi_mii_cleanup(struct rtl8366_smi *smi)
+{
+       mdiobus_unregister(smi->mii_bus);
+       mdiobus_free(smi->mii_bus);
+}
+
+static int rtl8366_smi_setup(struct rtl8366_smi *smi)
+{
+       u32 chip_id = 0;
+       u32 chip_ver = 0;
+       int ret;
+
+       ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_ID_REG, &chip_id);
+       if (ret) {
+               dev_err(&smi->pdev->dev, "unable to read chip id\n");
+               return ret;
+       }
+
+       switch (chip_id) {
+       case RTL8366S_CHIP_ID_8366:
+               break;
+       default:
+               dev_err(&smi->pdev->dev, "unknown chip id (%04x)\n", chip_id);
+               return -ENODEV;
+       }
+
+       ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_VERSION_CTRL_REG,
+                                  &chip_ver);
+       if (ret) {
+               dev_err(&smi->pdev->dev, "unable to read chip version\n");
+               return ret;
+       }
+
+       dev_info(&smi->pdev->dev, "RTL%04x ver. %u chip found\n",
+                chip_id, chip_ver & RTL8366S_CHIP_VERSION_MASK);
+
+       return 0;
+}
+
+static int __init rtl8366_smi_probe(struct platform_device *pdev)
+{
+       static int rtl8366_smi_version_printed;
+       struct rtl8366_smi_platform_data *pdata;
+       struct rtl8366_smi *smi;
+       int err;
+
+       if (!rtl8366_smi_version_printed++)
+               printk(KERN_NOTICE RTL8366_SMI_DRIVER_DESC
+                      " version " RTL8366_SMI_DRIVER_VER"\n");
+
+       pdata = pdev->dev.platform_data;
+       if (!pdata) {
+               dev_err(&pdev->dev, "no platform data specified\n");
+               err = -EINVAL;
+               goto err_out;
+       }
+
+       smi = kzalloc(sizeof(struct rtl8366_smi), GFP_KERNEL);
+       if (!smi) {
+               dev_err(&pdev->dev, "no memory for private data\n");
+               err = -ENOMEM;
+               goto err_out;
+       }
+
+       err = gpio_request(pdata->gpio_sda, dev_name(&pdev->dev));
+       if (err) {
+               dev_err(&pdev->dev, "gpio_request failed for %u, err=%d\n",
+                       pdata->gpio_sda, err);
+               goto err_free_smi;
+       }
+
+       err = gpio_request(pdata->gpio_sck, dev_name(&pdev->dev));
+       if (err) {
+               dev_err(&pdev->dev, "gpio_request failed for %u, err=%d\n",
+                       pdata->gpio_sck, err);
+               goto err_free_sda;
+       }
+
+       smi->pdev = pdev;
+       smi->pdata = pdata;
+       spin_lock_init(&smi->lock);
+
+       platform_set_drvdata(pdev, smi);
+
+       dev_info(&pdev->dev, "using GPIO pins %u (SDA) and %u (SCK)\n",
+                pdata->gpio_sda, pdata->gpio_sck);
+
+       err = rtl8366_smi_setup(smi);
+       if (err)
+               goto err_clear_drvdata;
+
+       err = rtl8366_smi_mii_init(smi);
+       if (err)
+               goto err_clear_drvdata;
+
+       return 0;
+
+ err_clear_drvdata:
+       platform_set_drvdata(pdev, NULL);
+       gpio_free(pdata->gpio_sck);
+ err_free_sda:
+       gpio_free(pdata->gpio_sda);
+ err_free_smi:
+       kfree(smi);
+ err_out:
+       return err;
+}
+
+static int __devexit rtl8366_smi_remove(struct platform_device *pdev)
+{
+       struct rtl8366_smi *smi = platform_get_drvdata(pdev);
+
+       if (smi) {
+               struct rtl8366_smi_platform_data *pdata;
+
+               pdata = pdev->dev.platform_data;
+
+               rtl8366_smi_mii_cleanup(smi);
+               platform_set_drvdata(pdev, NULL);
+               gpio_free(pdata->gpio_sck);
+               gpio_free(pdata->gpio_sda);
+               kfree(smi);
+       }
+
+       return 0;
+}
+
+int rtl8366_phy_config_aneg(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static struct platform_driver rtl8366_smi_driver = {
+       .driver = {
+               .name           = RTL8366_SMI_DRIVER_NAME,
+               .owner          = THIS_MODULE,
+       },
+       .probe          = rtl8366_smi_probe,
+       .remove         = __devexit_p(rtl8366_smi_remove),
+};
+
+static struct phy_driver rtl8366_smi_phy_driver = {
+       .phy_id         = 0x001cc960,
+       .name           = "Realtek RTL8366",
+       .phy_id_mask    = 0x1ffffff0,
+       .features       = PHY_GBIT_FEATURES,
+       .config_aneg    = rtl8366_phy_config_aneg,
+       .read_status    = genphy_read_status,
+       .driver         = {
+               .owner = THIS_MODULE,
+       },
+};
+
+static int __init rtl8366_smi_init(void)
+{
+       int ret;
+
+       ret = phy_driver_register(&rtl8366_smi_phy_driver);
+       if (ret)
+               return ret;
+
+       ret = platform_driver_register(&rtl8366_smi_driver);
+       if (ret)
+               goto err_phy_unregister;
+
+       return 0;
+
+ err_phy_unregister:
+       phy_driver_unregister(&rtl8366_smi_phy_driver);
+       return ret;
+}
+module_init(rtl8366_smi_init);
+
+static void __exit rtl8366_smi_exit(void)
+{
+       platform_driver_unregister(&rtl8366_smi_driver);
+       phy_driver_unregister(&rtl8366_smi_phy_driver);
+}
+module_exit(rtl8366_smi_exit);
+
+MODULE_DESCRIPTION(RTL8366_SMI_DRIVER_DESC);
+MODULE_VERSION(RTL8366_SMI_DRIVER_VER);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" RTL8366_SMI_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files/include/linux/rtl8366_smi.h b/target/linux/ar71xx/files/include/linux/rtl8366_smi.h
new file mode 100644 (file)
index 0000000..cd0fcbc
--- /dev/null
@@ -0,0 +1,19 @@
+/*
+ * Platform data definition for the Realtek RTL8366 ethernet switch driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366_SMI_H
+#define _RTL8366_SMI_H
+
+struct rtl8366_smi_platform_data {
+       unsigned        gpio_sda;
+       unsigned        gpio_sck;
+};
+
+#endif /*  _RTL8366_SMI_H */
diff --git a/target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch
new file mode 100644 (file)
index 0000000..afb3cbd
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -114,4 +114,8 @@ config MDIO_OF_GPIO
+       ---help---
+         Supports GPIO lib-based MDIO busses.
++config RTL8366_SMI
++      tristate "Support for RTL8366 switch via SMI interface"
++      depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)    += adm6996.o
+ obj-$(CONFIG_IP175C_PHY)      += ip175c.o
+ obj-$(CONFIG_RTL8306_PHY)     += rtl8306.o
+ obj-$(CONFIG_REALTEK_PHY)     += realtek.o
++obj-$(CONFIG_RTL8366_SMI)     += rtl8366_smi.o
+ obj-$(CONFIG_MICREL_PHY)      += micrel.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
diff --git a/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch
new file mode 100644 (file)
index 0000000..77874b4
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -140,4 +140,8 @@ config MDIO_GPIO
+         To compile this driver as a module, choose M here: the module
+         will be called mdio-gpio.
++config RTL8366_SMI
++      tristate "Support for RTL8366 switch via SMI interface"
++      depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY)     += ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)     += realtek.o
+ obj-$(CONFIG_AR8216_PHY)      += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)     += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)     += rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL)          += micrel.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
diff --git a/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch
new file mode 100644 (file)
index 0000000..77874b4
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -140,4 +140,8 @@ config MDIO_GPIO
+         To compile this driver as a module, choose M here: the module
+         will be called mdio-gpio.
++config RTL8366_SMI
++      tristate "Support for RTL8366 switch via SMI interface"
++      depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_IP175C_PHY)     += ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)     += realtek.o
+ obj-$(CONFIG_AR8216_PHY)      += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)     += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)     += rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL)          += micrel.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
diff --git a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch
new file mode 100644 (file)
index 0000000..78ec2e4
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -146,4 +146,8 @@ config MDIO_GPIO
+         To compile this driver as a module, choose M here: the module
+         will be called mdio-gpio.
++config RTL8366_SMI
++      tristate "Support for RTL8366 switch via SMI interface"
++      depends on GENERIC_GPIO
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_IP175C_PHY)     += ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)     += realtek.o
+ obj-$(CONFIG_AR8216_PHY)      += ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)     += rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)     += rtl8366_smi.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL)          += micrel.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
This page took 0.042799 seconds and 4 git commands to generate.