cleanup vlynq. drop vlynq-pci
authorejka <ejka@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Fri, 5 Oct 2007 17:54:36 +0000 (17:54 +0000)
committerejka <ejka@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Fri, 5 Oct 2007 17:54:36 +0000 (17:54 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9143 3c298f89-4303-0410-b956-a3cf2f4a3e73

15 files changed:
target/linux/ar7/config-2.6.22
target/linux/ar7/config-2.6.23
target/linux/ar7/files/arch/mips/ar7/Makefile
target/linux/ar7/files/arch/mips/ar7/platform.c
target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c [deleted file]
target/linux/ar7/files/arch/mips/ar7/vlynq.c [deleted file]
target/linux/ar7/files/drivers/vlynq/Kconfig [new file with mode: 0644]
target/linux/ar7/files/drivers/vlynq/Makefile [new file with mode: 0644]
target/linux/ar7/files/drivers/vlynq/vlynq.c [new file with mode: 0644]
target/linux/ar7/files/include/asm-mips/ar7/vlynq.h [deleted file]
target/linux/ar7/files/include/linux/vlynq.h [new file with mode: 0644]
target/linux/ar7/patches-2.6.22/100-board_support.patch
target/linux/ar7/patches-2.6.22/130-vlynq.patch [new file with mode: 0644]
target/linux/ar7/patches-2.6.23/100-board_support.patch
target/linux/ar7/patches-2.6.23/130-vlynq.patch [new file with mode: 0644]

index 3c2806c..07c6afb 100644 (file)
@@ -7,10 +7,8 @@ CONFIG_AR7_WDT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ATMEL is not set
 CONFIG_ATM_DRIVERS=y
 CONFIG_BASE_SMALL=0
 CONFIG_ATM_DRIVERS=y
 CONFIG_BASE_SMALL=0
-# CONFIG_BCM43XX is not set
 CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOOT_ELF32=y
 CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOOT_ELF32=y
@@ -47,7 +45,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_DDB5477 is not set
-CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
@@ -58,20 +55,14 @@ CONFIG_FIXED_PHY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_GEN_RTC is not set
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 # CONFIG_GEN_RTC is not set
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-# CONFIG_HERMES is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
 # CONFIG_I2C is not set
 # CONFIG_IDE is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_I2C is not set
 # CONFIG_IDE is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 CONFIG_IRQ_CPU=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_IRQ_CPU=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -130,40 +121,35 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PHRAM is not set
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_START=0x10000000
 # CONFIG_MTD_PLATRAM is not set
 # CONFIG_MTD_PHRAM is not set
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_START=0x10000000
 # CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_NETDEV_1000 is not set
-# CONFIG_NET_PCI is not set
 CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_GRE=m
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCIPCWATCHDOG is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNPACPI is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNPACPI is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_PRISM54 is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250_EXTENDED is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -185,6 +171,7 @@ CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_TOSHIBA_JMR3927 is not set
 CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_TOSHIBA_JMR3927 is not set
@@ -192,6 +179,9 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VGASTATE is not set
+CONFIG_VLYNQ=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_ZONE_DMA_FLAG=0
index f1bc7a5..fa1e7be 100644 (file)
@@ -6,10 +6,8 @@ CONFIG_AR7_WDT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ATMEL is not set
 CONFIG_ATM_DRIVERS=y
 CONFIG_BASE_SMALL=0
 CONFIG_ATM_DRIVERS=y
 CONFIG_BASE_SMALL=0
-# CONFIG_BCM43XX is not set
 CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOOT_ELF32=y
 CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOOT_ELF32=y
@@ -46,7 +44,7 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
-CONFIG_DEVPORT=y
+# CONFIG_CRYPTO_HW is not set
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
@@ -61,15 +59,10 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-# CONFIG_HERMES is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
 # CONFIG_I2C is not set
 # CONFIG_IDE is not set
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
 # CONFIG_I2C is not set
 # CONFIG_IDE is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 CONFIG_IRQ_CPU=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_IRQ_CPU=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -124,43 +117,39 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PHRAM is not set
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_START=0x10000000
 # CONFIG_MTD_PLATRAM is not set
 # CONFIG_MTD_PHRAM is not set
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_START=0x10000000
 # CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_NETDEV_1000 is not set
 CONFIG_NET_ACT_POLICE=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_NETDEV_1000 is not set
 CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_PCI is not set
 CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NO_EXCEPT_FILL=y
 # CONFIG_NO_IOPORT is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
 CONFIG_NO_EXCEPT_FILL=y
 # CONFIG_NO_IOPORT is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_PRISM54 is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250_EXTENDED is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_RTC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -190,7 +179,10 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USER_NS is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_USER_NS is not set
 # CONFIG_VGASTATE is not set
+CONFIG_VLYNQ=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_ZONE_DMA_FLAG=0
index bd10957..7435e44 100644 (file)
@@ -7,8 +7,4 @@ obj-y := \
        time.o \
        platform.o \
        gpio.o \
        time.o \
        platform.o \
        gpio.o \
-       clock.o \
-       vlynq.o
-
-obj-$(CONFIG_PCI) += \
-       vlynq-pci.o
+       clock.o
index f3a9372..8f410ba 100644 (file)
@@ -29,6 +29,7 @@
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/version.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/version.h>
+#include <linux/vlynq.h>
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
 #include <linux/leds.h>
 #endif
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
 #include <linux/leds.h>
 #endif
@@ -37,7 +38,6 @@
 #include <asm/ar7/ar7.h>
 #include <asm/ar7/gpio.h>
 #include <asm/ar7/prom.h>
 #include <asm/ar7/ar7.h>
 #include <asm/ar7/gpio.h>
 #include <asm/ar7/prom.h>
-#include <asm/ar7/vlynq.h>
 
 struct plat_vlynq_data {
        struct plat_vlynq_ops ops;
 
 struct plat_vlynq_data {
        struct plat_vlynq_ops ops;
diff --git a/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c b/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c
deleted file mode 100644 (file)
index 7a640db..0000000
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/ar7/vlynq.h>
-
-#define VLYNQ_PCI_SLOTS 2
-
-struct vlynq_reg_config {
-       u32 offset;
-       u32 value;
-};
-
-struct vlynq_pci_config {
-       u32 chip_id;
-       char name[32];
-       struct vlynq_mapping rx_mapping[4];
-       int irq;
-       int irq_type;
-       u32 chip;
-       u32 class;
-       int num_regs;
-       struct vlynq_reg_config regs[10];
-};
-
-struct vlynq_pci_private {
-       u32 latency;
-       u32 cache_line;
-       u32 command;
-       u32 sz_mask;
-       struct vlynq_pci_config *config;
-};
-
-static struct vlynq_pci_config known_devices[] = {
-       {
-               .chip_id = 0x00000009, .name = "TI TNETW1130",
-               .rx_mapping = {
-                       { .size = 0x22000, .offset = 0xf0000000 },
-                       { .size = 0x40000, .offset = 0xc0000000 },
-                       { .size = 0x0, .offset = 0x0 },
-                       { .size = 0x0, .offset = 0x0 },
-               },
-               .irq = 0, .chip = 0x9066104c,
-               .irq_type = IRQ_TYPE_EDGE_RISING,
-               .class = PCI_CLASS_NETWORK_OTHER,
-               .num_regs = 5,
-               .regs = {
-                       {
-                               .offset = 0x790,
-                               .value = (0xd0000000 - PHYS_OFFSET)
-                       },
-                       {
-                               .offset = 0x794,
-                               .value = (0xd0000000 - PHYS_OFFSET)
-                       },
-                       { .offset = 0x740, .value = 0 },
-                       { .offset = 0x744, .value = 0x00010000 },
-                       { .offset = 0x764, .value = 0x00010000 },
-               },
-       },
-       {
-               .chip_id = 0x00000029, .name = "TI TNETW1350",
-               .rx_mapping = {
-                       { .size = 0x100000, .offset = 0x00300000 },
-                       { .size = 0x80000, .offset = 0x00000000 },
-                       { .size = 0x0, .offset = 0x0 },
-                       { .size = 0x0, .offset = 0x0 },
-               },
-               .irq = 0, .chip = 0x9066104c,
-               .irq_type = IRQ_TYPE_EDGE_RISING,
-               .class = PCI_CLASS_NETWORK_OTHER,
-               .num_regs = 5,
-               .regs = {
-                       {
-                               .offset = 0x790,
-                               .value = (0x60000000 - PHYS_OFFSET)
-                       },
-                       {
-                               .offset = 0x794,
-                               .value = (0x60000000 - PHYS_OFFSET)
-                       },
-                       { .offset = 0x740, .value = 0 },
-                       { .offset = 0x744, .value = 0x00010000 },
-                       { .offset = 0x764, .value = 0x00010000 },
-               },
-       },
-};
-
-static struct vlynq_device *slots[VLYNQ_PCI_SLOTS] = { NULL, };
-
-static struct resource vlynq_io_resource = {
-       .start  = 0x00000000,
-       .end    = 0x00000000,
-       .name   = "pci IO space",
-       .flags  = IORESOURCE_IO
-};
-
-static struct resource vlynq_mem_resource = {
-       .start  = 0x00000000,
-       .end    = 0x00000000,
-       .name   = "pci memory space",
-       .flags  = IORESOURCE_MEM
-};
-
-static inline u32 vlynq_get_mapped(struct vlynq_device *dev, int res)
-{
-       int i;
-       struct vlynq_pci_private *priv = dev->priv;
-       u32 ret = dev->mem_start;
-       if (!priv->config->rx_mapping[res].size) return 0;
-       for (i = 0; i < res; i++)
-               ret += priv->config->rx_mapping[i].size;
-
-       return ret;
-}
-
-static inline u32 vlynq_read(u32 val, int size)
-{
-       switch (size) {
-       case 1:
-               return *(u8 *)&val;
-       case 2:
-               return *(u16 *)&val;
-       }
-       return val;
-}
-
-static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn,
-                            int where, int size, u32 *val)
-{
-       struct vlynq_device *dev;
-       struct vlynq_pci_private *priv;
-       int resno, slot = PCI_SLOT(devfn);
-
-       if ((size == 2) && (where & 1))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       else if ((size == 4) && (where & 3))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-
-       if (slot >= VLYNQ_PCI_SLOTS)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       dev = slots[slot];
-
-       if (!dev || (PCI_FUNC(devfn) > 0))
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       priv = dev->priv;
-
-       switch (where) {
-       case PCI_VENDOR_ID:
-               *val = vlynq_read(priv->config->chip, size);
-               break;
-       case PCI_DEVICE_ID:
-               *val = priv->config->chip & 0xffff;
-       case PCI_COMMAND:
-               *val = priv->command;
-       case PCI_STATUS:
-/*             *val = PCI_STATUS_CAP_LIST;*/
-               *val = 0;
-               break;
-       case PCI_CLASS_REVISION:
-               *val = priv->config->class;
-               break;
-       case PCI_LATENCY_TIMER:
-               *val = priv->latency;
-               break;
-       case PCI_HEADER_TYPE:
-               *val = PCI_HEADER_TYPE_NORMAL;
-               break;
-       case PCI_CACHE_LINE_SIZE:
-               *val = priv->cache_line;
-               break;
-       case PCI_BASE_ADDRESS_0:
-       case PCI_BASE_ADDRESS_1:
-       case PCI_BASE_ADDRESS_2:
-       case PCI_BASE_ADDRESS_3:
-               resno = (where - PCI_BASE_ADDRESS_0) >> 2;
-               if (priv->sz_mask & (1 << resno)) {
-                       priv->sz_mask &= ~(1 << resno);
-                       *val = priv->config->rx_mapping[resno].size;
-               } else {
-                       *val = vlynq_get_mapped(dev, resno);
-               }
-               break;
-       case PCI_BASE_ADDRESS_4:
-       case PCI_BASE_ADDRESS_5:
-       case PCI_SUBSYSTEM_VENDOR_ID:
-       case PCI_SUBSYSTEM_ID:
-       case PCI_ROM_ADDRESS:
-       case PCI_INTERRUPT_LINE:
-       case PCI_CARDBUS_CIS:
-       case PCI_CAPABILITY_LIST:
-               *val = 0;
-               break;
-       case PCI_INTERRUPT_PIN:
-               *val = 1;
-               break;
-       default:
-               printk(KERN_NOTICE "%s: Read of unknown register 0x%x "
-                      "(size %d)\n", dev->dev.bus_id, where, size);
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       }
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn,
-                             int where, int size, u32 val)
-{
-       struct vlynq_device *dev;
-       struct vlynq_pci_private *priv;
-       int resno, slot = PCI_SLOT(devfn);
-
-       if ((size == 2) && (where & 1))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       else if ((size == 4) && (where & 3))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-
-       if (slot >= VLYNQ_PCI_SLOTS)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       dev = slots[slot];
-
-       if (!dev || (PCI_FUNC(devfn) > 0))
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       priv = dev->priv;
-
-       switch (where) {
-       case PCI_VENDOR_ID:
-       case PCI_DEVICE_ID:
-       case PCI_STATUS:
-       case PCI_CLASS_REVISION:
-       case PCI_HEADER_TYPE:
-       case PCI_CACHE_LINE_SIZE:
-       case PCI_SUBSYSTEM_VENDOR_ID:
-       case PCI_SUBSYSTEM_ID:
-       case PCI_INTERRUPT_LINE:
-       case PCI_INTERRUPT_PIN:
-       case PCI_CARDBUS_CIS:
-       case PCI_CAPABILITY_LIST:
-               return PCIBIOS_FUNC_NOT_SUPPORTED;
-       case PCI_COMMAND:
-               priv->command = val;
-       case PCI_LATENCY_TIMER:
-               priv->latency = val;
-               break;
-       case PCI_BASE_ADDRESS_0:
-       case PCI_BASE_ADDRESS_1:
-       case PCI_BASE_ADDRESS_2:
-       case PCI_BASE_ADDRESS_3:
-               if (val == 0xffffffff) {
-                       resno = (where - PCI_BASE_ADDRESS_0) >> 2;
-                       priv->sz_mask |= (1 << resno);
-                       break;
-               }
-       case PCI_BASE_ADDRESS_4:
-       case PCI_BASE_ADDRESS_5:
-       case PCI_ROM_ADDRESS:
-               break;
-       default:
-               printk(KERN_NOTICE "%s: Write to unknown register 0x%x "
-                      "(size %d) value=0x%x\n", dev->dev.bus_id, where, size,
-                      val);
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       }
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops vlynq_pci_ops = {
-       vlynq_config_read,
-       vlynq_config_write
-};
-
-static struct pci_controller vlynq_controller = {
-       .pci_ops        = &vlynq_pci_ops,
-       .io_resource    = &vlynq_io_resource,
-       .mem_resource   = &vlynq_mem_resource,
-};
-
-static int vlynq_pci_probe(struct vlynq_device *dev)
-{
-       int result, i;
-       u32 chip_id, addr;
-       struct vlynq_pci_private *priv;
-       struct vlynq_mapping mapping[4] = { { 0, }, };
-       struct vlynq_pci_config *config = NULL;
-
-       result = vlynq_set_local_irq(dev, 31);
-       if (result)
-               return result;
-
-       result = vlynq_set_remote_irq(dev, 30);
-       if (result)
-               return result;
-
-       dev->divisor = vlynq_div_auto;
-       result = vlynq_device_enable(dev);
-       if (result)
-               return result;
-
-       chip_id = vlynq_remote_id(dev);
-       for (i = 0; i < ARRAY_SIZE(known_devices); i++)
-               if (chip_id == known_devices[i].chip_id)
-                       config = &known_devices[i];
-
-       if (!config) {
-               printk(KERN_DEBUG "vlynq-pci: skipping unknown device "
-                      "%04x:%04x at %s\n", chip_id >> 16,
-                      chip_id & 0xffff, dev->dev.bus_id);
-               result = -ENODEV;
-               goto fail;
-       }
-
-       printk(KERN_NOTICE "vlynq-pci: attaching device %s at %s\n",
-              config->name, dev->dev.bus_id);
-
-       priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-       if (!priv) {
-               printk(KERN_ERR "%s: failed to allocate private data\n",
-                      dev->dev.bus_id);
-               result = -ENOMEM;
-               goto fail;
-       }
-
-       priv->latency = 64;
-       priv->cache_line = 32;
-       priv->config = config;
-
-       mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT;
-       mapping[0].size = 0x02000000;
-       vlynq_set_local_mapping(dev, dev->mem_start, mapping);
-       vlynq_set_remote_mapping(dev, 0, config->rx_mapping);
-
-       set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type);
-
-       addr = (u32)ioremap_nocache(dev->mem_start, 0x10000);
-       if (!addr) {
-               printk(KERN_ERR "%s: failed to remap io memory\n",
-                      dev->dev.bus_id);
-               result = -ENXIO;
-               goto fail;
-       }
-
-       for (i = 0; i < config->num_regs; i++)
-               iowrite32(config->regs[i].value,
-                         (u32 *)(addr + config->regs[i].offset));
-
-       dev->priv = priv;
-       for (i = 0; i < VLYNQ_PCI_SLOTS; i++) {
-               if (!slots[i]) {
-                       slots[i] = dev;
-                       break;
-               }
-       }
-
-       return 0;
-
-fail:
-       vlynq_device_disable(dev);
-
-       return result;
-}
-
-static int vlynq_pci_remove(struct vlynq_device *dev)
-{
-       int i;
-       struct vlynq_pci_private *priv = dev->priv;
-
-       for (i = 0; i < VLYNQ_PCI_SLOTS; i++)
-               if (slots[i] == dev)
-                       slots[i] = NULL;
-
-       vlynq_device_disable(dev);
-       kfree(priv);
-
-       return 0;
-}
-
-static struct vlynq_driver vlynq_pci = {
-       .name = "PCI over VLYNQ emulation",
-       .probe = vlynq_pci_probe,
-       .remove = vlynq_pci_remove,
-};
-
-int vlynq_pci_init(void)
-{
-       int res;
-       res = vlynq_register_driver(&vlynq_pci);
-       if (res)
-               return res;
-
-       register_pci_controller(&vlynq_controller);
-
-       return 0;
-}
-
-int pcibios_map_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-       struct vlynq_device *dev;
-       struct vlynq_pci_private *priv;
-
-       dev = slots[slot];
-
-       if (!dev)
-               return 0;
-
-       priv = dev->priv;
-
-       return vlynq_virq_to_irq(dev, priv->config->irq);
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-       return 0;
-}
diff --git a/target/linux/ar7/files/arch/mips/ar7/vlynq.c b/target/linux/ar7/files/arch/mips/ar7/vlynq.c
deleted file mode 100644 (file)
index 4c0a86d..0000000
+++ /dev/null
@@ -1,653 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/ar7/vlynq.h>
-
-#define PER_DEVICE_IRQS                        32
-
-#define VLYNQ_CTRL_PM_ENABLE           0x80000000
-#define VLYNQ_CTRL_CLOCK_INT           0x00008000
-#define VLYNQ_CTRL_CLOCK_DIV(x)                (((x) & 7) << 16)
-#define VLYNQ_CTRL_INT_LOCAL           0x00004000
-#define VLYNQ_CTRL_INT_ENABLE          0x00002000
-#define VLYNQ_CTRL_INT_VECTOR(x)       (((x) & 0x1f) << 8)
-#define VLYNQ_CTRL_INT2CFG             0x00000080
-#define VLYNQ_CTRL_RESET               0x00000001
-
-#define VLYNQ_INT_OFFSET               0x00000014
-#define VLYNQ_REMOTE_OFFSET            0x00000080
-
-#define VLYNQ_STATUS_LINK              0x00000001
-#define VLYNQ_STATUS_LERROR            0x00000080
-#define VLYNQ_STATUS_RERROR            0x00000100
-
-#define VINT_ENABLE                    0x00000100
-#define VINT_TYPE_EDGE                 0x00000080
-#define VINT_LEVEL_LOW                 0x00000040
-#define VINT_VECTOR(x)                 ((x) & 0x1f)
-#define VINT_OFFSET(irq)               (8 * ((irq) % 4))
-
-#define VLYNQ_AUTONEGO_V2              0x00010000
-
-struct vlynq_regs {
-       u32 revision;
-       u32 control;
-       u32 status;
-       u32 int_prio;
-       u32 int_status;
-       u32 int_pending;
-       u32 int_ptr;
-       u32 tx_offset;
-       struct vlynq_mapping rx_mapping[4];
-       u32 chip;
-       u32 autonego;
-       u32 unused[6];
-       u32 int_device[8];
-} __attribute__ ((packed));
-
-#define vlynq_reg_read(reg) readl(&(reg))
-#define vlynq_reg_write(reg, val)  writel(val, &(reg))
-
-#ifdef VLYNQ_DEBUG
-static void vlynq_dump_regs(struct vlynq_device *dev)
-{
-       int i;
-       printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
-                       dev->local, dev->remote);
-       for (i = 0; i < 32; i++) {
-               printk(KERN_DEBUG "VLYNQ: local %d: %08x\n",
-                       i + 1, ((u32 *)dev->local)[i]);
-               printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n",
-                       i + 1, ((u32 *)dev->remote)[i]);
-       }
-}
-
-static void vlynq_dump_mem(u32 *base, int count)
-{
-       int i;
-       for (i = 0; i < (count + 3) / 4; i++) {
-               if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
-               printk(KERN_DEBUG " 0x%08x", *(base + i));
-       }
-       printk(KERN_DEBUG "\n");
-}
-#endif
-
-int vlynq_linked(struct vlynq_device *dev)
-{
-       int i;
-
-       for (i = 0; i < 100; i++)
-               if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
-                       return 1;
-               else
-                       cpu_relax();
-
-       return 0;
-}
-
-static void vlynq_irq_unmask(unsigned int irq)
-{
-       u32 val;
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-       int virq;
-
-       BUG_ON(!dev);
-       virq = irq - dev->irq_start;
-       val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
-       val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
-       vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-}
-
-static void vlynq_irq_mask(unsigned int irq)
-{
-       u32 val;
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-       int virq;
-
-       BUG_ON(!dev);
-       virq = irq - dev->irq_start;
-       val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
-       val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
-       vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-}
-
-static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
-{
-       u32 val;
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-       int virq;
-
-       BUG_ON(!dev);
-       virq = irq - dev->irq_start;
-       val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
-       switch (flow_type & IRQ_TYPE_SENSE_MASK) {
-       case IRQ_TYPE_EDGE_RISING:
-       case IRQ_TYPE_EDGE_FALLING:
-       case IRQ_TYPE_EDGE_BOTH:
-               val |= VINT_TYPE_EDGE << VINT_OFFSET(virq);
-               val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
-               break;
-       case IRQ_TYPE_LEVEL_HIGH:
-               val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
-               val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
-               break;
-       case IRQ_TYPE_LEVEL_LOW:
-               val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
-               val |= VINT_LEVEL_LOW << VINT_OFFSET(virq);
-               break;
-       default:
-               return -EINVAL;
-       }
-       vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
-       return 0;
-}
-
-static void vlynq_local_ack(unsigned int irq)
-{
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-       u32 status = vlynq_reg_read(dev->local->status);
-       if (printk_ratelimit())
-               printk(KERN_DEBUG "%s: local status: 0x%08x\n",
-                      dev->dev.bus_id, status);
-       vlynq_reg_write(dev->local->status, status);
-}
-
-static void vlynq_remote_ack(unsigned int irq)
-{
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-       u32 status = vlynq_reg_read(dev->remote->status);
-       if (printk_ratelimit())
-               printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
-                      dev->dev.bus_id, status);
-       vlynq_reg_write(dev->remote->status, status);
-}
-
-#warning FIXME: process one irq per call
-static irqreturn_t vlynq_irq(int irq, void *dev_id)
-{
-       struct vlynq_device *dev = dev_id;
-       u32 status;
-       int virq = 0;
-
-       status = vlynq_reg_read(dev->local->int_status);
-       vlynq_reg_write(dev->local->int_status, status);
-
-       if (unlikely(!status))
-               spurious_interrupt();
-
-       while (status) {
-               if (status & 1)
-                       do_IRQ(dev->irq_start + virq);
-               status >>= 1;
-               virq++;
-       }
-
-       return IRQ_HANDLED;
-}
-
-static struct irq_chip vlynq_irq_chip = {
-       .name = "vlynq",
-       .unmask = vlynq_irq_unmask,
-       .mask = vlynq_irq_mask,
-       .set_type = vlynq_irq_type,
-};
-
-static struct irq_chip vlynq_local_chip = {
-       .name = "vlynq local error",
-       .unmask = vlynq_irq_unmask,
-       .mask = vlynq_irq_mask,
-       .ack = vlynq_local_ack,
-};
-
-static struct irq_chip vlynq_remote_chip = {
-       .name = "vlynq local error",
-       .unmask = vlynq_irq_unmask,
-       .mask = vlynq_irq_mask,
-       .ack = vlynq_remote_ack,
-};
-
-static int vlynq_setup_irq(struct vlynq_device *dev)
-{
-       u32 val;
-       int i;
-
-       if (dev->local_irq == dev->remote_irq) {
-               printk(KERN_ERR
-                      "%s: local vlynq irq should be different from remote\n",
-                      dev->dev.bus_id);
-               return -EINVAL;
-       }
-
-       /* Clear local and remote error bits */
-       vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
-       vlynq_reg_write(dev->remote->status,
-                       vlynq_reg_read(dev->remote->status));
-
-       /* Now setup interrupts */
-       val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
-       val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
-               VLYNQ_CTRL_INT2CFG;
-       val |= vlynq_reg_read(dev->local->control);
-       vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
-       vlynq_reg_write(dev->local->control, val);
-
-       val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
-       val |= VLYNQ_CTRL_INT_ENABLE;
-       val |= vlynq_reg_read(dev->remote->control);
-       vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
-       vlynq_reg_write(dev->remote->control, val);
-
-       for (i = 0; i < PER_DEVICE_IRQS; i++) {
-               if (i == dev->local_irq) {
-                       set_irq_chip_and_handler(dev->irq_start + i,
-                                                &vlynq_local_chip,
-                                                handle_level_irq);
-                       set_irq_chip_data(dev->irq_start + i, dev);
-               } else if (i == dev->remote_irq) {
-                       set_irq_chip_and_handler(dev->irq_start + i,
-                                                &vlynq_remote_chip,
-                                                handle_level_irq);
-                       set_irq_chip_data(dev->irq_start + i, dev);
-               } else {
-                       set_irq_chip_and_handler(dev->irq_start + i,
-                                                &vlynq_irq_chip,
-                                                handle_simple_irq);
-                       set_irq_chip_data(dev->irq_start + i, dev);
-                       vlynq_reg_write(dev->remote->int_device[i >> 2], 0);
-               }
-       }
-
-       if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
-               printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
-               return -EAGAIN;
-       }
-
-       return 0;
-}
-
-static void vlynq_free_irq(struct vlynq_device *dev)
-{
-       free_irq(dev->irq, dev);
-}
-
-static void vlynq_device_release(struct device *dev)
-{
-       struct vlynq_device *vdev = to_vlynq_device(dev);
-       kfree(vdev);
-}
-
-static int vlynq_device_probe(struct device *dev)
-{
-       struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
-       if (drv->probe)
-               return drv->probe(to_vlynq_device(dev));
-       return 0;
-}
-
-static int vlynq_device_remove(struct device *dev)
-{
-       struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
-       if (drv->remove)
-               return drv->remove(to_vlynq_device(dev));
-       return 0;
-}
-
-int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
-{
-       driver->driver.name = driver->name;
-       driver->driver.bus = &vlynq_bus_type;
-       return driver_register(&driver->driver);
-}
-EXPORT_SYMBOL(__vlynq_register_driver);
-
-void vlynq_unregister_driver(struct vlynq_driver *driver)
-{
-       driver_unregister(&driver->driver);
-}
-EXPORT_SYMBOL(vlynq_unregister_driver);
-
-int vlynq_device_enable(struct vlynq_device *dev)
-{
-       int i, result;
-       struct plat_vlynq_ops *ops = dev->dev.platform_data;
-
-       result = ops->on(dev);
-       if (result)
-               return result;
-
-       switch (dev->divisor) {
-       case vlynq_div_auto:
-               /* First try locally supplied clock */
-               vlynq_reg_write(dev->remote->control, 0);
-               for (i = vlynq_ldiv1; i <= vlynq_ldiv8; i++) {
-                       vlynq_reg_write(dev->local->control,
-                                       VLYNQ_CTRL_CLOCK_INT |
-                                       VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
-                       if (vlynq_linked(dev)) {
-                               printk(KERN_DEBUG
-                                      "%s: using local clock divisor %d\n",
-                                      dev->dev.bus_id, i - vlynq_ldiv1 + 1);
-                               return vlynq_setup_irq(dev);
-                       }
-               }
-               /* Then remotely supplied clock */
-               vlynq_reg_write(dev->local->control, 0);
-               for (i = vlynq_rdiv1; i <= vlynq_rdiv8; i++) {
-                       vlynq_reg_write(dev->remote->control,
-                                       VLYNQ_CTRL_CLOCK_INT |
-                                       VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
-                       if (vlynq_linked(dev)) {
-                               printk(KERN_DEBUG
-                                      "%s: using remote clock divisor %d\n",
-                                      dev->dev.bus_id, i - vlynq_rdiv1 + 1);
-                               return vlynq_setup_irq(dev);
-                       }
-               }
-               /* At last, externally supplied clock */
-               vlynq_reg_write(dev->remote->control, 0);
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG "%s: using external clock\n",
-                              dev->dev.bus_id);
-                       return vlynq_setup_irq(dev);
-               }
-               break;
-       case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
-       case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
-               vlynq_reg_write(dev->remote->control, 0);
-               vlynq_reg_write(dev->local->control,
-                               VLYNQ_CTRL_CLOCK_INT |
-                               VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-                                                    vlynq_ldiv1));
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG
-                              "%s: using local clock divisor %d\n",
-                              dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
-                       return vlynq_setup_irq(dev);
-               }
-               break;
-       case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
-       case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
-               vlynq_reg_write(dev->local->control, 0);
-               vlynq_reg_write(dev->remote->control,
-                               VLYNQ_CTRL_CLOCK_INT |
-                               VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-                                                    vlynq_rdiv1));
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG
-                              "%s: using remote clock divisor %d\n",
-                              dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
-                       return vlynq_setup_irq(dev);
-               }
-               break;
-       case vlynq_div_external:
-               vlynq_reg_write(dev->local->control, 0);
-               vlynq_reg_write(dev->remote->control, 0);
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG "%s: using external clock\n",
-                              dev->dev.bus_id);
-                       return vlynq_setup_irq(dev);
-               }
-               break;
-       }
-
-       return -ENODEV;
-}
-
-void vlynq_device_disable(struct vlynq_device *dev)
-{
-       struct plat_vlynq_ops *ops = dev->dev.platform_data;
-
-       vlynq_free_irq(dev);
-       ops->off(dev);
-}
-
-u32 vlynq_remote_id(struct vlynq_device *dev)
-{
-       return vlynq_reg_read(dev->remote->chip);
-}
-
-void vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
-                            struct vlynq_mapping *mapping)
-{
-       int i;
-
-       vlynq_reg_write(dev->local->tx_offset, tx_offset);
-       for (i = 0; i < 4; i++) {
-               vlynq_reg_write(dev->local->rx_mapping[i].offset,
-                                                       mapping[i].offset);
-               vlynq_reg_write(dev->local->rx_mapping[i].size,
-                                                       mapping[i].size);
-       }
-}
-
-void vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
-                             struct vlynq_mapping *mapping)
-{
-       int i;
-
-       vlynq_reg_write(dev->remote->tx_offset, tx_offset);
-       for (i = 0; i < 4; i++) {
-               vlynq_reg_write(dev->remote->rx_mapping[i].offset,
-                                                       mapping[i].offset);
-               vlynq_reg_write(dev->remote->rx_mapping[i].size,
-                                                       mapping[i].size);
-       }
-}
-
-int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
-{
-       if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
-               return -EINVAL;
-
-       return dev->irq_start + virq;
-}
-
-int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
-{
-       if ((irq < dev->irq_start) || (irq >= dev->irq_start + PER_DEVICE_IRQS))
-               return -EINVAL;
-
-       return irq - dev->irq_start;
-}
-
-int vlynq_set_local_irq(struct vlynq_device *dev, int virq)
-{
-       if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
-               return -EINVAL;
-
-       if (virq == dev->remote_irq)
-               return -EINVAL;
-
-       dev->local_irq = virq;
-
-       return 0;
-}
-
-int vlynq_set_remote_irq(struct vlynq_device *dev, int virq)
-{
-       if ((virq < 0) || (virq >= PER_DEVICE_IRQS))
-               return -EINVAL;
-
-       if (virq == dev->local_irq)
-               return -EINVAL;
-
-       dev->remote_irq = virq;
-
-       return 0;
-}
-
-static int vlynq_probe(struct platform_device *pdev)
-{
-       struct vlynq_device *dev;
-       struct resource *regs_res, *mem_res, *irq_res;
-       int len, result;
-
-       if (strcmp(pdev->name, "vlynq"))
-               return -ENODEV;
-
-       regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-       if (!regs_res)
-               return -ENODEV;
-
-       mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
-       if (!mem_res)
-               return -ENODEV;
-
-       irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
-       if (!irq_res)
-               return -ENODEV;
-
-       dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-       if (!dev) {
-               printk(KERN_ERR
-                      "vlynq: failed to allocate device structure\n");
-               return -ENOMEM;
-       }
-
-       dev->id = pdev->id;
-       dev->dev.bus = &vlynq_bus_type;
-       dev->dev.parent = &pdev->dev;
-       snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
-       dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
-       dev->dev.platform_data = pdev->dev.platform_data;
-       dev->dev.release = vlynq_device_release;
-
-       dev->regs_start = regs_res->start;
-       dev->regs_end = regs_res->end;
-       dev->mem_start = mem_res->start;
-       dev->mem_end = mem_res->end;
-
-       len = regs_res->end - regs_res->start;
-       if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
-               printk(KERN_ERR "%s: Can't request vlynq registers\n",
-                      dev->dev.bus_id);
-               result = -ENXIO;
-               goto fail_request;
-       }
-
-       dev->local = ioremap(regs_res->start, len);
-       if (!dev->local) {
-               printk(KERN_ERR "%s: Can't remap vlynq registers\n",
-                      dev->dev.bus_id);
-               result = -ENXIO;
-               goto fail_remap;
-       }
-
-       dev->remote = (struct vlynq_regs *)((u32)dev->local +
-                                           VLYNQ_REMOTE_OFFSET);
-
-       dev->irq = platform_get_irq_byname(pdev, "irq");
-       dev->irq_start = irq_res->start;
-       dev->irq_end = irq_res->end;
-       dev->local_irq = 31;
-       dev->remote_irq = 30;
-
-       if (device_register(&dev->dev))
-               goto fail_register;
-       platform_set_drvdata(pdev, dev);
-
-       printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
-              dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
-              (void *)dev->mem_start);
-
-       return 0;
-
-fail_register:
-       iounmap(dev->local);
-fail_remap:
-fail_request:
-       release_mem_region(regs_res->start, len);
-       kfree(dev);
-       return result;
-}
-
-static int vlynq_remove(struct platform_device *pdev)
-{
-       struct vlynq_device *dev = platform_get_drvdata(pdev);
-
-       device_unregister(&dev->dev);
-       iounmap(dev->local);
-       release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
-
-       kfree(dev);
-
-       return 0;
-}
-
-static struct platform_driver vlynq_driver = {
-       .driver.name = "vlynq",
-       .probe = vlynq_probe,
-       .remove = vlynq_remove,
-};
-
-struct bus_type vlynq_bus_type = {
-       .name = "vlynq",
-       .probe = vlynq_device_probe,
-       .remove = vlynq_device_remove,
-};
-EXPORT_SYMBOL(vlynq_bus_type);
-
-#ifdef CONFIG_PCI
-extern void vlynq_pci_init(void);
-#endif
-static int __init vlynq_init(void)
-{
-       int res = 0;
-
-       res = bus_register(&vlynq_bus_type);
-       if (res)
-               goto fail_bus;
-
-       res = platform_driver_register(&vlynq_driver);
-       if (res)
-               goto fail_platform;
-
-#ifdef CONFIG_PCI
-       vlynq_pci_init();
-#endif
-
-       return 0;
-
-fail_platform:
-       bus_unregister(&vlynq_bus_type);
-fail_bus:
-       return res;
-}
-
-/* Add this back when vlynq-pci crap is gone */
-#if 0
-static void __devexit vlynq_exit(void)
-{
-       platform_driver_unregister(&vlynq_driver);
-       bus_unregister(&vlynq_bus_type);
-}
-#endif
-
-subsys_initcall(vlynq_init);
diff --git a/target/linux/ar7/files/drivers/vlynq/Kconfig b/target/linux/ar7/files/drivers/vlynq/Kconfig
new file mode 100644 (file)
index 0000000..2c8ffe0
--- /dev/null
@@ -0,0 +1,13 @@
+menu "TI VLYNQ"
+
+config VLYNQ
+       bool "TI VLYNQ bus support"
+       depends on AR7 && EXPERIMENTAL
+       help
+         Support for the TI VLYNQ bus
+
+         The module will be called vlynq
+
+         If unsure, say N
+
+endmenu
diff --git a/target/linux/ar7/files/drivers/vlynq/Makefile b/target/linux/ar7/files/drivers/vlynq/Makefile
new file mode 100644 (file)
index 0000000..b3f6114
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# Makefile for kernel vlynq drivers
+#
+
+obj-$(CONFIG_VLYNQ) += vlynq.o
diff --git a/target/linux/ar7/files/drivers/vlynq/vlynq.c b/target/linux/ar7/files/drivers/vlynq/vlynq.c
new file mode 100644 (file)
index 0000000..0dd6c18
--- /dev/null
@@ -0,0 +1,670 @@
+/*
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <linux/vlynq.h>
+
+#define VLYNQ_CTRL_PM_ENABLE           0x80000000
+#define VLYNQ_CTRL_CLOCK_INT           0x00008000
+#define VLYNQ_CTRL_CLOCK_DIV(x)                (((x) & 7) << 16)
+#define VLYNQ_CTRL_INT_LOCAL           0x00004000
+#define VLYNQ_CTRL_INT_ENABLE          0x00002000
+#define VLYNQ_CTRL_INT_VECTOR(x)       (((x) & 0x1f) << 8)
+#define VLYNQ_CTRL_INT2CFG             0x00000080
+#define VLYNQ_CTRL_RESET               0x00000001
+
+#define VLYNQ_INT_OFFSET               0x00000014
+#define VLYNQ_REMOTE_OFFSET            0x00000080
+
+#define VLYNQ_STATUS_LINK              0x00000001
+#define VLYNQ_STATUS_LERROR            0x00000080
+#define VLYNQ_STATUS_RERROR            0x00000100
+
+#define VINT_ENABLE                    0x00000100
+#define VINT_TYPE_EDGE                 0x00000080
+#define VINT_LEVEL_LOW                 0x00000040
+#define VINT_VECTOR(x)                 ((x) & 0x1f)
+#define VINT_OFFSET(irq)               (8 * ((irq) % 4))
+
+#define VLYNQ_AUTONEGO_V2              0x00010000
+
+struct vlynq_regs {
+       u32 revision;
+       u32 control;
+       u32 status;
+       u32 int_prio;
+       u32 int_status;
+       u32 int_pending;
+       u32 int_ptr;
+       u32 tx_offset;
+       struct vlynq_mapping rx_mapping[4];
+       u32 chip;
+       u32 autonego;
+       u32 unused[6];
+       u32 int_device[8];
+} __attribute__ ((packed));
+
+#define vlynq_reg_read(reg) readl(&(reg))
+#define vlynq_reg_write(reg, val)  writel(val, &(reg))
+
+static int __vlynq_enable_device(struct vlynq_device *dev);
+
+#ifdef VLYNQ_DEBUG
+static void vlynq_dump_regs(struct vlynq_device *dev)
+{
+       int i;
+       printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
+                       dev->local, dev->remote);
+       for (i = 0; i < 32; i++) {
+               printk(KERN_DEBUG "VLYNQ: local %d: %08x\n",
+                       i + 1, ((u32 *)dev->local)[i]);
+               printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n",
+                       i + 1, ((u32 *)dev->remote)[i]);
+       }
+}
+
+static void vlynq_dump_mem(u32 *base, int count)
+{
+       int i;
+       for (i = 0; i < (count + 3) / 4; i++) {
+               if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
+               printk(KERN_DEBUG " 0x%08x", *(base + i));
+       }
+       printk(KERN_DEBUG "\n");
+}
+#endif
+
+int vlynq_linked(struct vlynq_device *dev)
+{
+       int i;
+
+       for (i = 0; i < 100; i++)
+               if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
+                       return 1;
+               else
+                       cpu_relax();
+
+       return 0;
+}
+
+static void vlynq_irq_unmask(unsigned int irq)
+{
+       u32 val;
+       struct vlynq_device *dev = get_irq_chip_data(irq);
+       int virq;
+
+       BUG_ON(!dev);
+       virq = irq - dev->irq_start;
+       val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
+       val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
+       vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
+}
+
+static void vlynq_irq_mask(unsigned int irq)
+{
+       u32 val;
+       struct vlynq_device *dev = get_irq_chip_data(irq);
+       int virq;
+
+       BUG_ON(!dev);
+       virq = irq - dev->irq_start;
+       val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
+       val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
+       vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
+}
+
+static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
+{
+       u32 val;
+       struct vlynq_device *dev = get_irq_chip_data(irq);
+       int virq;
+
+       BUG_ON(!dev);
+       virq = irq - dev->irq_start;
+       val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
+       switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+       case IRQ_TYPE_EDGE_RISING:
+       case IRQ_TYPE_EDGE_FALLING:
+       case IRQ_TYPE_EDGE_BOTH:
+               val |= VINT_TYPE_EDGE << VINT_OFFSET(virq);
+               val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
+               break;
+       case IRQ_TYPE_LEVEL_HIGH:
+               val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
+               val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
+               break;
+       case IRQ_TYPE_LEVEL_LOW:
+               val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
+               val |= VINT_LEVEL_LOW << VINT_OFFSET(virq);
+               break;
+       default:
+               return -EINVAL;
+       }
+       vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
+       return 0;
+}
+
+static void vlynq_local_ack(unsigned int irq)
+{
+       struct vlynq_device *dev = get_irq_chip_data(irq);
+       u32 status = vlynq_reg_read(dev->local->status);
+       if (printk_ratelimit())
+               printk(KERN_DEBUG "%s: local status: 0x%08x\n",
+                      dev->dev.bus_id, status);
+       vlynq_reg_write(dev->local->status, status);
+}
+
+static void vlynq_remote_ack(unsigned int irq)
+{
+       struct vlynq_device *dev = get_irq_chip_data(irq);
+       u32 status = vlynq_reg_read(dev->remote->status);
+       if (printk_ratelimit())
+               printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
+                      dev->dev.bus_id, status);
+       vlynq_reg_write(dev->remote->status, status);
+}
+
+static irqreturn_t vlynq_irq(int irq, void *dev_id)
+{
+       struct vlynq_device *dev = dev_id;
+       u32 status;
+       int virq = 0;
+
+       status = vlynq_reg_read(dev->local->int_status);
+       vlynq_reg_write(dev->local->int_status, status);
+
+       if (unlikely(!status))
+               spurious_interrupt();
+
+       while (status) {
+               if (status & 1)
+                       do_IRQ(dev->irq_start + virq);
+               status >>= 1;
+               virq++;
+       }
+
+       return IRQ_HANDLED;
+}
+
+static struct irq_chip vlynq_irq_chip = {
+       .name = "vlynq",
+       .unmask = vlynq_irq_unmask,
+       .mask = vlynq_irq_mask,
+       .set_type = vlynq_irq_type,
+};
+
+static struct irq_chip vlynq_local_chip = {
+       .name = "vlynq local error",
+       .unmask = vlynq_irq_unmask,
+       .mask = vlynq_irq_mask,
+       .ack = vlynq_local_ack,
+};
+
+static struct irq_chip vlynq_remote_chip = {
+       .name = "vlynq local error",
+       .unmask = vlynq_irq_unmask,
+       .mask = vlynq_irq_mask,
+       .ack = vlynq_remote_ack,
+};
+
+static int vlynq_setup_irq(struct vlynq_device *dev)
+{
+       u32 val;
+       int i, virq;
+
+       if (dev->local_irq == dev->remote_irq) {
+               printk(KERN_ERR
+                      "%s: local vlynq irq should be different from remote\n",
+                      dev->dev.bus_id);
+               return -EINVAL;
+       }
+
+       /* Clear local and remote error bits */
+       vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
+       vlynq_reg_write(dev->remote->status,
+                       vlynq_reg_read(dev->remote->status));
+
+       /* Now setup interrupts */
+       val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
+       val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
+               VLYNQ_CTRL_INT2CFG;
+       val |= vlynq_reg_read(dev->local->control);
+       vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
+       vlynq_reg_write(dev->local->control, val);
+
+       val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
+       val |= VLYNQ_CTRL_INT_ENABLE;
+       val |= vlynq_reg_read(dev->remote->control);
+       vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
+       vlynq_reg_write(dev->remote->control, val);
+
+       for (i = dev->irq_start; i <= dev->irq_end; i++) {
+               virq = i - dev->irq_start;
+               if (virq == dev->local_irq) {
+                       set_irq_chip_and_handler(i, &vlynq_local_chip,
+                                                handle_level_irq);
+                       set_irq_chip_data(i, dev);
+               } else if (virq == dev->remote_irq) {
+                       set_irq_chip_and_handler(i, &vlynq_remote_chip,
+                                                handle_level_irq);
+                       set_irq_chip_data(i, dev);
+               } else {
+                       set_irq_chip_and_handler(i, &vlynq_irq_chip,
+                                                handle_simple_irq);
+                       set_irq_chip_data(i, dev);
+                       vlynq_reg_write(dev->remote->int_device[virq >> 2], 0);
+               }
+       }
+
+       if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
+               printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
+               return -EAGAIN;
+       }
+
+       return 0;
+}
+
+static void vlynq_device_release(struct device *dev)
+{
+       struct vlynq_device *vdev = to_vlynq_device(dev);
+       kfree(vdev);
+}
+
+static int vlynq_device_match(struct device *dev,
+                             struct device_driver *drv)
+{
+       struct vlynq_device *vdev = to_vlynq_device(dev);
+       struct vlynq_driver *vdrv = to_vlynq_driver(drv);
+       struct plat_vlynq_ops *ops = dev->platform_data;
+       struct vlynq_device_id *ids = vdrv->id_table;
+       u32 id = 0;
+       int result;
+
+       while (ids->id) {
+               vdev->divisor = ids->divisor;
+               result = __vlynq_enable_device(vdev);
+               if (result == 0) {
+                       id = vlynq_reg_read(vdev->remote->chip);
+                       ops->off(vdev);
+                       if (ids->id == id) {
+                               vlynq_set_drvdata(vdev, ids);
+                               return 1;
+                       }
+               }
+               ids++;
+       }
+       return 0;
+}
+
+static int vlynq_device_probe(struct device *dev)
+{
+       struct vlynq_device *vdev = to_vlynq_device(dev);
+       struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+       struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
+       int result = -ENODEV;
+
+       get_device(dev);
+       if (drv && drv->probe)
+               result = drv->probe(vdev, id);
+       if (result)
+               put_device(dev);
+       return result;
+}
+
+static int vlynq_device_remove(struct device *dev)
+{
+       struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+       if (drv && drv->remove)
+               drv->remove(to_vlynq_device(dev));
+       put_device(dev);
+       return 0;
+}
+
+int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
+{
+       driver->driver.name = driver->name;
+       driver->driver.bus = &vlynq_bus_type;
+       return driver_register(&driver->driver);
+}
+EXPORT_SYMBOL(__vlynq_register_driver);
+
+void vlynq_unregister_driver(struct vlynq_driver *driver)
+{
+       driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL(vlynq_unregister_driver);
+
+static int __vlynq_enable_device(struct vlynq_device *dev)
+{
+       int i, result;
+       struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+       result = ops->on(dev);
+       if (result)
+               return result;
+
+       switch (dev->divisor) {
+       case vlynq_div_auto:
+               /* Only try locally supplied clock, others cause problems */
+               vlynq_reg_write(dev->remote->control, 0);
+               for (i = vlynq_ldiv1; i <= vlynq_ldiv8; i++) {
+                       vlynq_reg_write(dev->local->control,
+                                       VLYNQ_CTRL_CLOCK_INT |
+                                       VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
+                       if (vlynq_linked(dev)) {
+                               printk(KERN_DEBUG
+                                      "%s: using local clock divisor %d\n",
+                                      dev->dev.bus_id, i - vlynq_ldiv1 + 1);
+                               dev->divisor = i;
+                               return 0;
+                       }
+               }
+       case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
+       case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
+               vlynq_reg_write(dev->remote->control, 0);
+               vlynq_reg_write(dev->local->control,
+                               VLYNQ_CTRL_CLOCK_INT |
+                               VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+                                                    vlynq_ldiv1));
+               if (vlynq_linked(dev)) {
+                       printk(KERN_DEBUG
+                              "%s: using local clock divisor %d\n",
+                              dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
+                       return 0;
+               }
+               break;
+       case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
+       case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
+               vlynq_reg_write(dev->local->control, 0);
+               vlynq_reg_write(dev->remote->control,
+                               VLYNQ_CTRL_CLOCK_INT |
+                               VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+                                                    vlynq_rdiv1));
+               if (vlynq_linked(dev)) {
+                       printk(KERN_DEBUG
+                              "%s: using remote clock divisor %d\n",
+                              dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
+                       return 0;
+               }
+               break;
+       case vlynq_div_external:
+               vlynq_reg_write(dev->local->control, 0);
+               vlynq_reg_write(dev->remote->control, 0);
+               if (vlynq_linked(dev)) {
+                       printk(KERN_DEBUG "%s: using external clock\n",
+                              dev->dev.bus_id);
+                       return 0;
+               }
+               break;
+       }
+
+       ops->off(dev);
+       return -ENODEV;
+}
+
+int vlynq_enable_device(struct vlynq_device *dev)
+{
+       struct plat_vlynq_ops *ops = dev->dev.platform_data;
+       int result = -ENODEV;
+
+       result = __vlynq_enable_device(dev);
+       if (result)
+               return result;
+
+       result = vlynq_setup_irq(dev);
+       if (result)
+               ops->off(dev);
+
+       dev->enabled = !result;
+       return result;
+}
+EXPORT_SYMBOL(vlynq_enable_device);
+
+
+void vlynq_disable_device(struct vlynq_device *dev)
+{
+       struct plat_vlynq_ops *ops = dev->dev.platform_data;
+
+       dev->enabled = 0;
+       free_irq(dev->irq, dev);
+       ops->off(dev);
+}
+EXPORT_SYMBOL(vlynq_disable_device);
+
+int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+                           struct vlynq_mapping *mapping)
+{
+       int i;
+
+       if (!dev->enabled)
+               return -ENXIO;
+
+       vlynq_reg_write(dev->local->tx_offset, tx_offset);
+       for (i = 0; i < 4; i++) {
+               vlynq_reg_write(dev->local->rx_mapping[i].offset,
+                                                       mapping[i].offset);
+               vlynq_reg_write(dev->local->rx_mapping[i].size,
+                                                       mapping[i].size);
+       }
+       return 0;
+}
+EXPORT_SYMBOL(vlynq_set_local_mapping);
+
+int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+                            struct vlynq_mapping *mapping)
+{
+       int i;
+
+       if (!dev->enabled)
+               return -ENXIO;
+
+       vlynq_reg_write(dev->remote->tx_offset, tx_offset);
+       for (i = 0; i < 4; i++) {
+               vlynq_reg_write(dev->remote->rx_mapping[i].offset,
+                                                       mapping[i].offset);
+               vlynq_reg_write(dev->remote->rx_mapping[i].size,
+                                                       mapping[i].size);
+       }
+       return 0;
+}
+EXPORT_SYMBOL(vlynq_set_remote_mapping);
+
+int vlynq_set_local_irq(struct vlynq_device *dev, int virq)
+{
+       int irq = dev->irq_start + virq;
+       if (dev->enabled)
+               return -EBUSY;
+
+       if ((irq < dev->irq_start) || (irq > dev->irq_end))
+               return -EINVAL;
+
+       if (virq == dev->remote_irq)
+               return -EINVAL;
+
+       dev->local_irq = virq;
+
+       return 0;
+}
+EXPORT_SYMBOL(vlynq_set_local_irq);
+
+int vlynq_set_remote_irq(struct vlynq_device *dev, int virq)
+{
+       int irq = dev->irq_start + virq;
+       if (dev->enabled)
+               return -EBUSY;
+
+       if ((irq < dev->irq_start) || (irq > dev->irq_end))
+               return -EINVAL;
+
+       if (virq == dev->local_irq)
+               return -EINVAL;
+
+       dev->remote_irq = virq;
+
+       return 0;
+}
+EXPORT_SYMBOL(vlynq_set_remote_irq);
+
+static int vlynq_probe(struct platform_device *pdev)
+{
+       struct vlynq_device *dev;
+       struct resource *regs_res, *mem_res, *irq_res;
+       int len, result;
+
+       regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+       if (!regs_res)
+               return -ENODEV;
+
+       mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+       if (!mem_res)
+               return -ENODEV;
+
+       irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
+       if (!irq_res)
+               return -ENODEV;
+
+       dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+       if (!dev) {
+               printk(KERN_ERR
+                      "vlynq: failed to allocate device structure\n");
+               return -ENOMEM;
+       }
+
+       dev->id = pdev->id;
+       dev->dev.bus = &vlynq_bus_type;
+       dev->dev.parent = &pdev->dev;
+       snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
+       dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
+       dev->dev.platform_data = pdev->dev.platform_data;
+       dev->dev.release = vlynq_device_release;
+
+       dev->regs_start = regs_res->start;
+       dev->regs_end = regs_res->end;
+       dev->mem_start = mem_res->start;
+       dev->mem_end = mem_res->end;
+
+       len = regs_res->end - regs_res->start;
+       if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
+               printk(KERN_ERR "%s: Can't request vlynq registers\n",
+                      dev->dev.bus_id);
+               result = -ENXIO;
+               goto fail_request;
+       }
+
+       dev->local = ioremap(regs_res->start, len);
+       if (!dev->local) {
+               printk(KERN_ERR "%s: Can't remap vlynq registers\n",
+                      dev->dev.bus_id);
+               result = -ENXIO;
+               goto fail_remap;
+       }
+
+       dev->remote = (struct vlynq_regs *)((void *)dev->local +
+                                           VLYNQ_REMOTE_OFFSET);
+
+       dev->irq = platform_get_irq_byname(pdev, "irq");
+       dev->irq_start = irq_res->start;
+       dev->irq_end = irq_res->end;
+       dev->local_irq = dev->irq_end - dev->irq_start;
+       dev->remote_irq = dev->local_irq - 1;
+
+       if (device_register(&dev->dev))
+               goto fail_register;
+       platform_set_drvdata(pdev, dev);
+
+       printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
+              dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
+              (void *)dev->mem_start);
+
+       return 0;
+
+fail_register:
+       iounmap(dev->local);
+fail_remap:
+fail_request:
+       release_mem_region(regs_res->start, len);
+       kfree(dev);
+       return result;
+}
+
+static int vlynq_remove(struct platform_device *pdev)
+{
+       struct vlynq_device *dev = platform_get_drvdata(pdev);
+
+       device_unregister(&dev->dev);
+       iounmap(dev->local);
+       release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
+
+       kfree(dev);
+
+       return 0;
+}
+
+static struct platform_driver vlynq_driver = {
+       .driver.name = "vlynq",
+       .probe = vlynq_probe,
+       .remove = __devexit_p(vlynq_remove),
+};
+
+struct bus_type vlynq_bus_type = {
+       .name = "vlynq",
+       .match = vlynq_device_match,
+       .probe = vlynq_device_probe,
+       .remove = vlynq_device_remove,
+};
+EXPORT_SYMBOL(vlynq_bus_type);
+
+static int __devinit vlynq_init(void)
+{
+       int res = 0;
+
+       res = bus_register(&vlynq_bus_type);
+       if (res)
+               goto fail_bus;
+
+       res = platform_driver_register(&vlynq_driver);
+       if (res)
+               goto fail_platform;
+
+       return 0;
+
+fail_platform:
+       bus_unregister(&vlynq_bus_type);
+fail_bus:
+       return res;
+}
+
+static void __devexit vlynq_exit(void)
+{
+       platform_driver_unregister(&vlynq_driver);
+       bus_unregister(&vlynq_bus_type);
+}
+
+module_init(vlynq_init);
+module_exit(vlynq_exit);
diff --git a/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h b/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h
deleted file mode 100644 (file)
index e2cfe87..0000000
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __VLYNQ_H__
-#define __VLYNQ_H__
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/types.h>
-
-struct vlynq_mapping {
-       u32 size;
-       u32 offset;
-} __attribute__ ((packed));
-
-struct vlynq_device_id {
-       u32 id;
-};
-
-enum vlynq_divisor {
-       vlynq_div_auto = 0,
-       vlynq_ldiv1,
-       vlynq_ldiv2,
-       vlynq_ldiv3,
-       vlynq_ldiv4,
-       vlynq_ldiv5,
-       vlynq_ldiv6,
-       vlynq_ldiv7,
-       vlynq_ldiv8,
-       vlynq_rdiv1,
-       vlynq_rdiv2,
-       vlynq_rdiv3,
-       vlynq_rdiv4,
-       vlynq_rdiv5,
-       vlynq_rdiv6,
-       vlynq_rdiv7,
-       vlynq_rdiv8,
-       vlynq_div_external
-};
-
-struct vlynq_regs;
-struct vlynq_device {
-       u32 id;
-       int irq;
-       int local_irq;
-       int remote_irq;
-       enum vlynq_divisor divisor;
-       u32 regs_start, regs_end;
-       u32 mem_start, mem_end;
-       u32 irq_start, irq_end;
-       void *priv;
-       struct vlynq_regs *local;
-       struct vlynq_regs *remote;
-       struct device dev;
-};
-
-struct vlynq_driver {
-       char *name;
-       int (*probe)(struct vlynq_device *dev);
-       int (*remove)(struct vlynq_device *dev);
-       struct device_driver driver;
-};
-
-#define to_vlynq_driver(drv) container_of(drv, struct vlynq_driver, driver)
-
-struct plat_vlynq_ops {
-       int (*on)(struct vlynq_device *dev);
-       void (*off)(struct vlynq_device *dev);
-};
-
-#define to_vlynq_device(device) container_of(device, struct vlynq_device, dev)
-
-extern struct bus_type vlynq_bus_type;
-
-extern int __vlynq_register_driver(struct vlynq_driver *driver,
-                                  struct module *owner);
-
-static inline int vlynq_register_driver(struct vlynq_driver *driver)
-{
-       return __vlynq_register_driver(driver, THIS_MODULE);
-}
-
-extern void vlynq_unregister_driver(struct vlynq_driver *driver);
-extern int vlynq_device_enable(struct vlynq_device *dev);
-extern void vlynq_device_disable(struct vlynq_device *dev);
-extern u32 vlynq_remote_id(struct vlynq_device *dev);
-extern void vlynq_set_local_mapping(struct vlynq_device *dev,
-                                   u32 tx_offset,
-                                   struct vlynq_mapping *mapping);
-extern void vlynq_set_remote_mapping(struct vlynq_device *dev,
-                                    u32 tx_offset,
-                                    struct vlynq_mapping *mapping);
-extern int vlynq_virq_to_irq(struct vlynq_device *dev, int virq);
-extern int vlynq_irq_to_virq(struct vlynq_device *dev, int irq);
-extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
-extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
-
-#endif /* __VLYNQ_H__ */
diff --git a/target/linux/ar7/files/include/linux/vlynq.h b/target/linux/ar7/files/include/linux/vlynq.h
new file mode 100644 (file)
index 0000000..b3f2474
--- /dev/null
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __VLYNQ_H__
+#define __VLYNQ_H__
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define VLYNQ_NUM_IRQS 32
+
+struct vlynq_mapping {
+       u32 size;
+       u32 offset;
+};
+
+enum vlynq_divisor {
+       vlynq_div_auto = 0,
+       vlynq_ldiv1,
+       vlynq_ldiv2,
+       vlynq_ldiv3,
+       vlynq_ldiv4,
+       vlynq_ldiv5,
+       vlynq_ldiv6,
+       vlynq_ldiv7,
+       vlynq_ldiv8,
+       vlynq_rdiv1,
+       vlynq_rdiv2,
+       vlynq_rdiv3,
+       vlynq_rdiv4,
+       vlynq_rdiv5,
+       vlynq_rdiv6,
+       vlynq_rdiv7,
+       vlynq_rdiv8,
+       vlynq_div_external
+};
+
+struct vlynq_device_id {
+       u32 id;
+       enum vlynq_divisor divisor;
+       unsigned long driver_data;
+};
+
+struct vlynq_regs;
+struct vlynq_device {
+       u32 id;
+       int local_irq;
+       int remote_irq;
+       enum vlynq_divisor divisor;
+       u32 regs_start, regs_end;
+       u32 mem_start, mem_end;
+       u32 irq_start, irq_end;
+       int irq;
+       int enabled;
+       struct vlynq_regs *local;
+       struct vlynq_regs *remote;
+       struct device dev;
+};
+
+struct vlynq_driver {
+       char *name;
+       struct vlynq_device_id *id_table;
+       int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id);
+       void (*remove)(struct vlynq_device *dev);
+       struct device_driver driver;
+};
+
+struct plat_vlynq_ops {
+       int (*on)(struct vlynq_device *dev);
+       void (*off)(struct vlynq_device *dev);
+};
+
+static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv)
+{
+       return container_of(drv, struct vlynq_driver, driver);
+}
+
+static inline struct vlynq_device *to_vlynq_device(struct device *device)
+{
+       return container_of(device, struct vlynq_device, dev);
+}
+
+extern struct bus_type vlynq_bus_type;
+
+extern int __vlynq_register_driver(struct vlynq_driver *driver,
+                                  struct module *owner);
+
+static inline int vlynq_register_driver(struct vlynq_driver *driver)
+{
+       return __vlynq_register_driver(driver, THIS_MODULE);
+}
+
+static inline void *vlynq_get_drvdata(struct vlynq_device *dev)
+{
+       return dev_get_drvdata(&dev->dev);
+}
+
+static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data)
+{
+       dev_set_drvdata(&dev->dev, data);
+}
+
+static inline u32 vlynq_mem_start(struct vlynq_device *dev)
+{
+       return dev->mem_start;
+}
+
+static inline u32 vlynq_mem_end(struct vlynq_device *dev)
+{
+       return dev->mem_end;
+}
+
+static inline u32 vlynq_mem_len(struct vlynq_device *dev)
+{
+       return dev->mem_end - dev->mem_start + 1;
+}
+
+static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
+{
+       int irq = dev->irq_start + virq;
+       if ((irq < dev->irq_start) || (irq > dev->irq_end))
+               return -EINVAL;
+
+       return irq;
+}
+
+static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
+{
+       if ((irq < dev->irq_start) || (irq > dev->irq_end))
+               return -EINVAL;
+
+       return irq - dev->irq_start;
+}
+
+extern void vlynq_unregister_driver(struct vlynq_driver *driver);
+extern int vlynq_enable_device(struct vlynq_device *dev);
+extern void vlynq_disable_device(struct vlynq_device *dev);
+extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+                                  struct vlynq_mapping *mapping);
+extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+                                   struct vlynq_mapping *mapping);
+extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
+extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
+
+#endif /* __VLYNQ_H__ */
index b157715..59fafa5 100644 (file)
@@ -1,7 +1,7 @@
 diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
 --- linux-2.6.22/arch/mips/Kconfig     2007-07-09 01:32:17.000000000 +0200
 +++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200
 diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
 --- linux-2.6.22/arch/mips/Kconfig     2007-07-09 01:32:17.000000000 +0200
 +++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200
-@@ -15,6 +15,22 @@
+@@ -15,6 +15,21 @@
        prompt "System type"
        default SGI_IP22
  
        prompt "System type"
        default SGI_IP22
  
@@ -9,7 +9,6 @@ diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig
 +      bool "Texas Instruments AR7"
 +      select BOOT_ELF32
 +      select DMA_NONCOHERENT
 +      bool "Texas Instruments AR7"
 +      select BOOT_ELF32
 +      select DMA_NONCOHERENT
-+      select HW_HAS_PCI
 +      select IRQ_CPU
 +      select SWAP_IO_SPACE
 +      select SYS_HAS_CPU_MIPS32_R1
 +      select IRQ_CPU
 +      select SWAP_IO_SPACE
 +      select SYS_HAS_CPU_MIPS32_R1
diff --git a/target/linux/ar7/patches-2.6.22/130-vlynq.patch b/target/linux/ar7/patches-2.6.22/130-vlynq.patch
new file mode 100644 (file)
index 0000000..2e8dea3
--- /dev/null
@@ -0,0 +1,20 @@
+Index: linux-2.6.22.4/drivers/Kconfig
+===================================================================
+--- linux-2.6.22.4.orig/drivers/Kconfig        2007-10-06 01:09:43.000000000 +0800
++++ linux-2.6.22.4/drivers/Kconfig     2007-10-06 01:12:19.000000000 +0800
+@@ -84,4 +84,6 @@
+ source "drivers/kvm/Kconfig"
++source "drivers/vlynq/Kconfig"
++
+ endmenu
+Index: linux-2.6.22.4/drivers/Makefile
+===================================================================
+--- linux-2.6.22.4.orig/drivers/Makefile       2007-10-06 01:09:43.000000000 +0800
++++ linux-2.6.22.4/drivers/Makefile    2007-10-06 01:12:37.000000000 +0800
+@@ -81,3 +81,4 @@
+ obj-$(CONFIG_DMA_ENGINE)      += dma/
+ obj-$(CONFIG_HID)             += hid/
+ obj-$(CONFIG_PPC_PS3)         += ps3/
++obj-$(CONFIG_VLYNQ)           += vlynq/
index c3da71b..9269a13 100644 (file)
@@ -2,7 +2,7 @@ Index: linux-2.6.23-rc6/arch/mips/Kconfig
 ===================================================================
 --- linux-2.6.23-rc6.orig/arch/mips/Kconfig    2007-09-21 16:23:51.000000000 +0800
 +++ linux-2.6.23-rc6/arch/mips/Kconfig 2007-09-21 16:24:11.000000000 +0800
 ===================================================================
 --- linux-2.6.23-rc6.orig/arch/mips/Kconfig    2007-09-21 16:23:51.000000000 +0800
 +++ linux-2.6.23-rc6/arch/mips/Kconfig 2007-09-21 16:24:11.000000000 +0800
-@@ -15,6 +15,23 @@
+@@ -15,6 +15,22 @@
        prompt "System type"
        default SGI_IP22
  
        prompt "System type"
        default SGI_IP22
  
@@ -10,7 +10,6 @@ Index: linux-2.6.23-rc6/arch/mips/Kconfig
 +      bool "Texas Instruments AR7"
 +      select BOOT_ELF32
 +      select DMA_NONCOHERENT
 +      bool "Texas Instruments AR7"
 +      select BOOT_ELF32
 +      select DMA_NONCOHERENT
-+      select HW_HAS_PCI
 +      select IRQ_CPU
 +      select NO_EXCEPT_FILL
 +      select SWAP_IO_SPACE
 +      select IRQ_CPU
 +      select NO_EXCEPT_FILL
 +      select SWAP_IO_SPACE
diff --git a/target/linux/ar7/patches-2.6.23/130-vlynq.patch b/target/linux/ar7/patches-2.6.23/130-vlynq.patch
new file mode 100644 (file)
index 0000000..6cdb4df
--- /dev/null
@@ -0,0 +1,20 @@
+Index: linux-2.6.23-rc9/drivers/Kconfig
+===================================================================
+--- linux-2.6.23-rc9.orig/drivers/Kconfig      2007-10-05 20:47:14.000000000 +0800
++++ linux-2.6.23-rc9/drivers/Kconfig   2007-10-05 20:47:42.000000000 +0800
+@@ -89,4 +89,6 @@
+ source "drivers/uio/Kconfig"
+ source "drivers/lguest/Kconfig"
++
++source "drivers/vlynq/Kconfig"
+ endmenu
+Index: linux-2.6.23-rc9/drivers/Makefile
+===================================================================
+--- linux-2.6.23-rc9.orig/drivers/Makefile     2007-10-05 20:47:09.000000000 +0800
++++ linux-2.6.23-rc9/drivers/Makefile  2007-10-05 20:47:30.000000000 +0800
+@@ -88,3 +88,4 @@
+ obj-$(CONFIG_HID)             += hid/
+ obj-$(CONFIG_PPC_PS3)         += ps3/
+ obj-$(CONFIG_OF)              += of/
++obj-$(CONFIG_VLYNQ)           += vlynq/
This page took 0.090121 seconds and 4 git commands to generate.