[package] broadcom-wl: give the 007 patch a more meaningful name

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27752 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/package/broadcom-wl/patches/007-add-bcma-support.patch b/package/broadcom-wl/patches/007-add-bcma-support.patch
deleted file mode 100644 (file)
index 2639abc..0000000
--- a/package/broadcom-wl/patches/007-add-bcma-support.patch
+++ /dev/null
@@ -1,184 +0,0 @@
---- a/driver/wl_linux.c
-+++ b/driver/wl_linux.c
-@@ -85,10 +85,9 @@ typedef void wlc_hw_info_t;
- #include <bcmjtag.h>
- #endif        /* BCMJTAG */
- 
--
--#ifdef CONFIG_SSB
--#include <linux/ssb/ssb.h>
--#endif
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-+#include <wl_glue.h>
-+#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
- 
- /* Linux wireless extension support */
- #ifdef CONFIG_WIRELESS_EXT
-@@ -997,62 +996,32 @@ static struct pci_driver wl_pci_driver =
- #endif        /* CONFIG_PCI */
- #endif  
- 
-+#ifdef BCMJTAG
-+static bcmjtag_driver_t wl_jtag_driver = {
-+              wl_jtag_probe,
-+              wl_jtag_detach,
-+              wl_jtag_poll,
-+              };
-+#endif        /* BCMJTAG */
- 
--static int wl_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-+static void * glue_attach_cb(u16 vendor, u16 device,
-+                                ulong mmio, void *dev, u32 irq)
- {
--      wl_info_t *wl;
--      void *mmio;
--
--      if (dev->bus->bustype != SSB_BUSTYPE_SSB) {
--              printk("Attaching to SSB behind PCI is not supported. Please remove the b43 ssb bridge\n");
--              return -EINVAL;
--      }
--
--      mmio = (void *) 0x18000000 + dev->core_index * 0x1000;
--      wl = wl_attach(id->vendor, id->coreid, (ulong) mmio, SI_BUS, dev, dev->irq);
--      if (!wl) {
--              printk("wl_attach failed\n");
--              return -ENODEV;
--      }
--
--      ssb_set_drvdata(dev, wl);
--
--      return 0;
-+      return wl_attach(vendor, device, mmio, SI_BUS, dev, irq);
- }
- 
--static void wl_ssb_remove(struct ssb_device *dev)
-+static void glue_remove_cb(void *wldev)
- {
--      wl_info_t *wl = (wl_info_t *) ssb_get_drvdata(dev);
-+      wl_info_t *wl = (wl_info_t *)wldev;
- 
-       WL_LOCK(wl);
-       WL_APSTA_UPDN(("wl%d (%s): wl_remove() -> wl_down()\n", wl->pub->unit, wl->dev->name));
-       wl_down(wl);
-       WL_UNLOCK(wl);
-       wl_free(wl);
--      ssb_set_drvdata(dev, NULL);
- }
--
--static const struct ssb_device_id wl_ssb_tbl[] = {
--      SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, SSB_ANY_REV),
--      SSB_DEVTABLE_END
--};
--
--#ifdef CONFIG_SSB
--static struct ssb_driver wl_ssb_driver = {
--      .name   = KBUILD_MODNAME,
--      .id_table = wl_ssb_tbl,
--      .probe = wl_ssb_probe,
--      .remove = wl_ssb_remove,
--};
--#endif
--
--#ifdef BCMJTAG
--static bcmjtag_driver_t wl_jtag_driver = {
--              wl_jtag_probe,
--              wl_jtag_detach,
--              wl_jtag_poll,
--              };
--#endif        /* BCMJTAG */
-+#endif/* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
- 
- 
- /** 
-@@ -1067,11 +1036,13 @@ wl_module_init(void)
- {
-       int error = -ENODEV;
- 
--#ifdef CONFIG_SSB
--      error = ssb_driver_register(&wl_ssb_driver);
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-+      wl_glue_set_attach_callback(&glue_attach_cb);
-+      wl_glue_set_remove_callback(&glue_remove_cb);
-+      error = wl_glue_register();
-       if (error)
-               return error;
--#endif        /* CONFIG_SSB */
-+#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
- 
- #ifdef CONFIG_PCI
-       error = pci_register_driver(&wl_pci_driver);
-@@ -1082,7 +1053,9 @@ wl_module_init(void)
-       return 0;
- 
- error_pci:
--      ssb_driver_unregister(&wl_ssb_driver);
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-+      wl_glue_unregister();
-+#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
-       return error;
- }
- 
-@@ -1099,9 +1072,9 @@ wl_module_exit(void)
- #ifdef CONFIG_PCI
-       pci_unregister_driver(&wl_pci_driver);
- #endif        /* CONFIG_PCI */
--#ifdef CONFIG_SSB
--      ssb_driver_unregister(&wl_ssb_driver);
--#endif        /* CONFIG_SSB */
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-+      wl_glue_unregister();
-+#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
- }
- 
- module_init(wl_module_init);
---- a/driver/linux_osl.c
-+++ b/driver/linux_osl.c
-@@ -25,9 +25,9 @@
- #include <asm/paccess.h>
- #endif /* mips */
- #include <pcicfg.h>
--#ifdef CONFIG_SSB
--#include <linux/ssb/ssb.h>
--#endif
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-+#include <wl_glue.h>
-+#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
- 
- #define PCI_CFG_RETRY                 10
- 
-@@ -370,15 +370,17 @@ osl_dma_consistent_align(void)
- static struct device *
- osl_get_dmadev(osl_t *osh)
- {
--#ifdef CONFIG_SSB
-+#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
-       if (osh->bustype == SI_BUS) {
--              /* This can be SiliconBackplane emulated as pci with Broadcom or
--               * ssb device. Less harmful is to check for pci_bus_type and if
--               * no match then assume we got ssb */
-+              /* This can be SiliconBackplane emulated as pci with Broadcom,
-+               * ssb or bcma device. Less harmful is to check for pci_bus_type and if
-+               * no match then assume we got either ssb or bcma */
-               if (((struct pci_dev *)osh->pdev)->dev.bus != &pci_bus_type)
--                      return ((struct ssb_device *)osh->pdev)->dma_dev;
-+              {
-+                      return wl_glue_get_dmadev(osh->pdev);
-+              }
-       }
--#endif
-+#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
-       return &((struct pci_dev *)osh->pdev)->dev;
- }
- 
---- a/driver/Makefile
-+++ b/driver/Makefile
-@@ -1,7 +1,7 @@
- BUILD_TYPE=wl_apsta
- include $(src)/$(BUILD_TYPE)/buildflags.mk
- 
--EXTRA_CFLAGS += -I$(src)/include -I$(src) -DBCMDRIVER $(WLFLAGS)
-+EXTRA_CFLAGS += -I$(src)/include -I$(src) -I$(realpath $(src)/../glue) -DBCMDRIVER $(WLFLAGS)
- 
- wl-objs := $(BUILD_TYPE)/wl_prebuilt.o wl_iw.o wl_linux.o linux_osl.o siutils.o aiutils.o hndpmu.o bcmutils.o sbutils.o nicpci.o hnddma.o bcmsrom.o nvram_stub.o
- 

diff --git a/package/broadcom-wl/patches/007-use-glue-driver.patch b/package/broadcom-wl/patches/007-use-glue-driver.patch
new file mode 100644 (file)
index 0000000..2639abc
--- /dev/null
+++ b/package/broadcom-wl/patches/007-use-glue-driver.patch
@@ -0,0 +1,184 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -85,10 +85,9 @@ typedef void wlc_hw_info_t;
+ #include <bcmjtag.h>
+ #endif        /* BCMJTAG */
+ 
+-
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++#include <wl_glue.h>
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ /* Linux wireless extension support */
+ #ifdef CONFIG_WIRELESS_EXT
+@@ -997,62 +996,32 @@ static struct pci_driver wl_pci_driver =
+ #endif        /* CONFIG_PCI */
+ #endif  
+ 
++#ifdef BCMJTAG
++static bcmjtag_driver_t wl_jtag_driver = {
++              wl_jtag_probe,
++              wl_jtag_detach,
++              wl_jtag_poll,
++              };
++#endif        /* BCMJTAG */
+ 
+-static int wl_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++static void * glue_attach_cb(u16 vendor, u16 device,
++                                ulong mmio, void *dev, u32 irq)
+ {
+-      wl_info_t *wl;
+-      void *mmio;
+-
+-      if (dev->bus->bustype != SSB_BUSTYPE_SSB) {
+-              printk("Attaching to SSB behind PCI is not supported. Please remove the b43 ssb bridge\n");
+-              return -EINVAL;
+-      }
+-
+-      mmio = (void *) 0x18000000 + dev->core_index * 0x1000;
+-      wl = wl_attach(id->vendor, id->coreid, (ulong) mmio, SI_BUS, dev, dev->irq);
+-      if (!wl) {
+-              printk("wl_attach failed\n");
+-              return -ENODEV;
+-      }
+-
+-      ssb_set_drvdata(dev, wl);
+-
+-      return 0;
++      return wl_attach(vendor, device, mmio, SI_BUS, dev, irq);
+ }
+ 
+-static void wl_ssb_remove(struct ssb_device *dev)
++static void glue_remove_cb(void *wldev)
+ {
+-      wl_info_t *wl = (wl_info_t *) ssb_get_drvdata(dev);
++      wl_info_t *wl = (wl_info_t *)wldev;
+ 
+       WL_LOCK(wl);
+       WL_APSTA_UPDN(("wl%d (%s): wl_remove() -> wl_down()\n", wl->pub->unit, wl->dev->name));
+       wl_down(wl);
+       WL_UNLOCK(wl);
+       wl_free(wl);
+-      ssb_set_drvdata(dev, NULL);
+ }
+-
+-static const struct ssb_device_id wl_ssb_tbl[] = {
+-      SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, SSB_ANY_REV),
+-      SSB_DEVTABLE_END
+-};
+-
+-#ifdef CONFIG_SSB
+-static struct ssb_driver wl_ssb_driver = {
+-      .name   = KBUILD_MODNAME,
+-      .id_table = wl_ssb_tbl,
+-      .probe = wl_ssb_probe,
+-      .remove = wl_ssb_remove,
+-};
+-#endif
+-
+-#ifdef BCMJTAG
+-static bcmjtag_driver_t wl_jtag_driver = {
+-              wl_jtag_probe,
+-              wl_jtag_detach,
+-              wl_jtag_poll,
+-              };
+-#endif        /* BCMJTAG */
++#endif/* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ 
+ /** 
+@@ -1067,11 +1036,13 @@ wl_module_init(void)
+ {
+       int error = -ENODEV;
+ 
+-#ifdef CONFIG_SSB
+-      error = ssb_driver_register(&wl_ssb_driver);
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++      wl_glue_set_attach_callback(&glue_attach_cb);
++      wl_glue_set_remove_callback(&glue_remove_cb);
++      error = wl_glue_register();
+       if (error)
+               return error;
+-#endif        /* CONFIG_SSB */
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ #ifdef CONFIG_PCI
+       error = pci_register_driver(&wl_pci_driver);
+@@ -1082,7 +1053,9 @@ wl_module_init(void)
+       return 0;
+ 
+ error_pci:
+-      ssb_driver_unregister(&wl_ssb_driver);
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++      wl_glue_unregister();
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+       return error;
+ }
+ 
+@@ -1099,9 +1072,9 @@ wl_module_exit(void)
+ #ifdef CONFIG_PCI
+       pci_unregister_driver(&wl_pci_driver);
+ #endif        /* CONFIG_PCI */
+-#ifdef CONFIG_SSB
+-      ssb_driver_unregister(&wl_ssb_driver);
+-#endif        /* CONFIG_SSB */
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++      wl_glue_unregister();
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ }
+ 
+ module_init(wl_module_init);
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -25,9 +25,9 @@
+ #include <asm/paccess.h>
+ #endif /* mips */
+ #include <pcicfg.h>
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++#include <wl_glue.h>
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ #define PCI_CFG_RETRY                 10
+ 
+@@ -370,15 +370,17 @@ osl_dma_consistent_align(void)
+ static struct device *
+ osl_get_dmadev(osl_t *osh)
+ {
+-#ifdef CONFIG_SSB
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
+       if (osh->bustype == SI_BUS) {
+-              /* This can be SiliconBackplane emulated as pci with Broadcom or
+-               * ssb device. Less harmful is to check for pci_bus_type and if
+-               * no match then assume we got ssb */
++              /* This can be SiliconBackplane emulated as pci with Broadcom,
++               * ssb or bcma device. Less harmful is to check for pci_bus_type and if
++               * no match then assume we got either ssb or bcma */
+               if (((struct pci_dev *)osh->pdev)->dev.bus != &pci_bus_type)
+-                      return ((struct ssb_device *)osh->pdev)->dma_dev;
++              {
++                      return wl_glue_get_dmadev(osh->pdev);
++              }
+       }
+-#endif
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+       return &((struct pci_dev *)osh->pdev)->dev;
+ }
+ 
+--- a/driver/Makefile
++++ b/driver/Makefile
+@@ -1,7 +1,7 @@
+ BUILD_TYPE=wl_apsta
+ include $(src)/$(BUILD_TYPE)/buildflags.mk
+ 
+-EXTRA_CFLAGS += -I$(src)/include -I$(src) -DBCMDRIVER $(WLFLAGS)
++EXTRA_CFLAGS += -I$(src)/include -I$(src) -I$(realpath $(src)/../glue) -DBCMDRIVER $(WLFLAGS)
+ 
+ wl-objs := $(BUILD_TYPE)/wl_prebuilt.o wl_iw.o wl_linux.o linux_osl.o siutils.o aiutils.o hndpmu.o bcmutils.o sbutils.o nicpci.o hnddma.o bcmsrom.o nvram_stub.o
+