[ar7] add back the fixed PHY patches from #3124, until we move this to platform_data

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17107 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar7/patches-2.6.27/160-cpmac_up_and_running.patch b/target/linux/ar7/patches-2.6.27/160-cpmac_up_and_running.patch
new file mode 100644 (file)
index 0000000..d11bbf2
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.27/160-cpmac_up_and_running.patch
@@ -0,0 +1,47 @@
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -33,6 +33,8 @@
+ #include <linux/vlynq.h>
+ #include <linux/leds.h>
+ #include <linux/string.h>
++#include <linux/phy.h>
++#include <linux/phy_fixed.h>
+ 
+ #include <asm/addrspace.h>
+ #include <asm/ar7/ar7.h>
+@@ -205,6 +207,13 @@
+       .width = 2,
+ };
+ 
++/* lets assume this is suitable for both high and low cpmacs links */
++static struct fixed_phy_status fixed_phy_status __initdata = {
++      .link = 1,
++      .speed = 100,
++      .duplex = 1,
++};
++
+ static struct plat_cpmac_data cpmac_low_data = {
+       .reset_bit = 17,
+       .power_bit = 20,
+@@ -506,6 +515,10 @@
+       }
+ 
+       if (ar7_has_high_cpmac()) {
++              res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
++              if (res && res != -ENODEV)
++                      return res;
++
+               cpmac_get_mac(1, cpmac_high_data.dev_addr);
+               res = platform_device_register(&cpmac_high);
+               if (res)
+@@ -514,6 +527,10 @@
+               cpmac_low_data.phy_mask = 0xffffffff;
+       }
+ 
++      res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
++      if (res && res != -ENODEV)
++              return res;
++
+       cpmac_get_mac(0, cpmac_low_data.dev_addr);
+       res = platform_device_register(&cpmac_low);
+       if (res)

diff --git a/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch b/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch
new file mode 100644 (file)
index 0000000..dd4bb76
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.27/910-cpmac_fixed_phy.patch
@@ -0,0 +1,92 @@
+This is a hack to make cpmac work with the external switch on a DG834 v3; it
+should also work on other similar routers. It has not been tested on hardware
+with multiple cpmac devices or with no external switch. It may be safer to
+move external_switch to pdata rather than trying to detect it, and to set
+phy_mask correctly rather than moving the phy search loop.
+
+--- a/drivers/net/cpmac.c      2008-11-11 06:18:24.000000000 +1100
++++ b/drivers/net/cpmac.c      2009-04-11 10:58:58.000000000 +1000
+@@ -1124,8 +1124,8 @@
+ 
+ static int __devinit cpmac_probe(struct platform_device *pdev)
+ {
+       int rc, phy_id;
+-      char *mdio_bus_id = "0";
++      char mdio_bus_id[BUS_ID_SIZE];
+       struct resource *mem;
+       struct cpmac_priv *priv;
+       struct net_device *dev;
+@@ -1134,22 +1134,23 @@
+ 
+       pdata = pdev->dev.platform_data;
+ 
+-      for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+-              if (!(pdata->phy_mask & (1 << phy_id)))
+-                      continue;
+-              if (!cpmac_mii.phy_map[phy_id])
+-                      continue;
+-              break;
++      if (external_switch || dumb_switch) {
++              strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
++              phy_id = pdev->id;
++      } else {
++              for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
++                      if (!(pdata->phy_mask & (1 << phy_id)))
++                              continue;
++                      if (!cpmac_mii.phy_map[phy_id])
++                              continue;
++                      strncpy(mdio_bus_id, cpmac_mii.id, BUS_ID_SIZE);
++                      break;
++              }
+       }
+ 
+       if (phy_id == PHY_MAX_ADDR) {
+-              if (external_switch || dumb_switch) {
+-                      mdio_bus_id = 0; /* fixed phys bus */
+-                      phy_id = pdev->id;
+-              } else {
+-                      dev_err(&pdev->dev, "no PHY present\n");
+-                      return -ENODEV;
+-              }
++              dev_err(&pdev->dev, "no PHY present\n");
++              return -ENODEV;
+       }
+ 
+ #ifdef CONFIG_NETDEVICES_MULTIQUEUE
+@@ -1189,9 +1190,11 @@
+       priv->ring_size = 64;
+       priv->msg_enable = netif_msg_init(debug_level, 0xff);
+       memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
++      
++      snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ 
+-      priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id,
+-                              &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
++      priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
++                              PHY_INTERFACE_MODE_MII);
+       if (IS_ERR(priv->phy)) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_ERR "%s: Could not attach to PHY\n",
+@@ -1250,11 +1253,11 @@
+ 
+       cpmac_mii.reset(&cpmac_mii);
+ 
+-      for (i = 0; i < 300000; i++)
++      for (i = 0; i < 300; i++)
+               if ((mask = cpmac_read(cpmac_mii.priv, CPMAC_MDIO_ALIVE)))
+                       break;
+               else
+-                      cpu_relax();
++                      msleep(10);
+ 
+       mask &= 0x7fffffff;
+       if (mask & (mask - 1)) {
+@@ -1267,7 +1270,7 @@
+       }
+ 
+       cpmac_mii.phy_mask = ~(mask | 0x80000000);
+-      snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "0");
++      snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "1");
+ 
+       res = mdiobus_register(&cpmac_mii);
+       if (res)