[adm5120] split support of Cellvision boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12255 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig
index cb7739a..1c4a91a 100644 (file)
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/Kconfig
@@ -3,7 +3,14 @@ if ADM5120
 menu "ADM5120 Board selection"
 
 config ADM5120_MACH_CAS_771
-       bool "Cellvision CAS-771 support"
+       bool "Cellvision CAS-771/771W support"
+       depends on CPU_LITTLE_ENDIAN
+       select ADM5120_SOC_BGA
+       select ADM5120_OEM_CELLVISION
+       default y
+
+config ADM5120_MACH_NFS_101
+       bool "Cellvision NFS-101U/101WU support"
        depends on CPU_LITTLE_ENDIAN
        select ADM5120_SOC_BGA
        select ADM5120_OEM_CELLVISION

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile
index 189951e..a949fc9 100644 (file)
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/Makefile
@@ -1 +1,4 @@
-obj-y  += cellvision.o
\ No newline at end of file
+obj-y  += cellvision.o
+
+obj-$(CONFIG_ADM5120_MACH_CAS_771)     += cas-771.o
+obj-$(CONFIG_ADM5120_MACH_NFS_101)     += nfs-101.o

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c
new file mode 100644 (file)
index 0000000..26995bb
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cas-771.c
@@ -0,0 +1,36 @@
+/*
+ *  Cellvision/SparkLAN CAS-771/771W support
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
+       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
+       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
+};
+
+static struct gpio_led cas771_gpio_leds[] __initdata = {
+       GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash",    NULL),
+       /* GPIO PIN3 is the reset */
+       GPIO_LED_STD(ADM5120_GPIO_PIN6, "access",       NULL),
+       GPIO_LED_STD(ADM5120_GPIO_P0L1, "status",       NULL),
+       GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag",         NULL),
+};
+
+static void __init cas771_setup(void)
+{
+       cas7xx_setup();
+       adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
+                                       cas771_gpio_leds);
+       adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
+}
+
+ADM5120_BOARD(MACH_ADM5120_CAS771, "Cellvision CAS-771/771W", cas771_setup);

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c
index f58a8fe..2b90ce1 100644 (file)
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c
@@ -9,16 +9,7 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
+#include "cellvision.h"
 
 #define CELLVISION_GPIO_FLASH_A20      ADM5120_GPIO_PIN5
 #define CELLVISION_GPIO_DEV_MASK       (1 << CELLVISION_GPIO_FLASH_A20)
@@ -71,20 +62,6 @@ static struct mtd_partition cas7xx_partitions[] = {
 };
 #endif /* CONFIG_MTD_PARTITIONS */
 
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct gpio_led cas771_gpio_leds[] __initdata = {
-       GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash",    NULL),
-       /* GPIO PIN3 is the reset */
-       GPIO_LED_STD(ADM5120_GPIO_PIN6, "access",       NULL),
-       GPIO_LED_STD(ADM5120_GPIO_P0L1, "status",       NULL),
-       GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag",         NULL),
-};
-
 static void switch_bank_gpio5(unsigned bank)
 {
        switch (bank) {
@@ -97,7 +74,7 @@ static void switch_bank_gpio5(unsigned bank)
        }
 }
 
-static void __init cellvision_generic_setup(void)
+static void __init cellvision_flash_setup(void)
 {
        /* setup flash A20 line */
        gpio_request(CELLVISION_GPIO_FLASH_A20, NULL);
@@ -107,59 +84,45 @@ static void __init cellvision_generic_setup(void)
        adm5120_add_device_flash(0);
 }
 
-static void __init cas6xx_setup(void)
+void __init cas6xx_flash_setup(void)
 {
 #ifdef CONFIG_MTD_PARTITIONS
        adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
        adm5120_flash0_data.parts = cas6xx_partitions;
 #endif /* CONFIG_MTD_PARTITIONS */
-       cellvision_generic_setup();
 
-       adm5120_add_device_switch(1, NULL);
+       cellvision_flash_setup();
 }
 
-ADM5120_BOARD(MACH_ADM5120_CAS630, "Cellvision CAS-630/630W", cas6xx_setup);
-ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup);
-
-static void __init cas7xx_setup(void)
+void __init cas7xx_flash_setup(void)
 {
 #ifdef CONFIG_MTD_PARTITIONS
        adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
        adm5120_flash0_data.parts = cas7xx_partitions;
 #endif /* CONFIG_MTD_PARTITIONS */
 
-       adm5120_add_device_switch(1, NULL);
+       cellvision_flash_setup();
 }
 
-ADM5120_BOARD(MACH_ADM5120_CAS700, "Cellvision CAS-700/700W", cas7xx_setup);
-ADM5120_BOARD(MACH_ADM5120_CAS790, "Cellvision CAS-790", cas7xx_setup);
-ADM5120_BOARD(MACH_ADM5120_CAS861, "Cellvision CAS-861/861W", cas7xx_setup);
-
-static void __init cas771_setup(void)
+#if 0
+void __init cas6xx_setup(void)
 {
-       cas7xx_setup();
-       adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds),
-                                       cas771_gpio_leds);
-       adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs);
+       cas6xx_flash_setup();
+       adm5120_add_device_switch(1, NULL);
 }
 
-ADM5120_BOARD(MACH_ADM5120_CAS771, "Cellvision CAS-771/771W", cas771_setup);
-
-static u8 nfs_vlans[6] __initdata = { /* TODO: not tested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
+ADM5120_BOARD(MACH_ADM5120_CAS630, "Cellvision CAS-630/630W", cas6xx_setup);
+ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup);
+#endif
 
-static void __init nfs_setup(void)
+void __init cas7xx_setup(void)
 {
-#ifdef CONFIG_MTD_PARTITIONS
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-       adm5120_flash0_data.parts = cas6xx_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
-
-       cellvision_generic_setup();
-       adm5120_add_device_switch(5, nfs_vlans);
-
-       /* TODO: add PCI IRQ map */
+       cas7xx_flash_setup();
+       adm5120_add_device_switch(1, NULL);
 }
 
-ADM5120_BOARD(MACH_ADM5120_NFS101U, "Cellvision NFS-101U/101WU", nfs_setup);
+#if 0
+ADM5120_BOARD(MACH_ADM5120_CAS700, "Cellvision CAS-700/700W", cas7xx_setup);
+ADM5120_BOARD(MACH_ADM5120_CAS790, "Cellvision CAS-790", cas7xx_setup);
+ADM5120_BOARD(MACH_ADM5120_CAS861, "Cellvision CAS-861/861W", cas7xx_setup);
+#endif

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h
new file mode 100644 (file)
index 0000000..c7c6a1e
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.h
@@ -0,0 +1,26 @@
+/*
+ *  Cellvision/SparkLAN boards
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+#include <asm/mach-adm5120/adm5120_irq.h>
+
+extern void cas6xx_flash_setup(void) __init;
+extern void cas7xx_flash_setup(void) __init;
+extern void cas6xx_setup(void) __init;
+extern void cas7xx_setup(void) __init;

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c
new file mode 100644 (file)
index 0000000..efd4e57
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c
@@ -0,0 +1,24 @@
+/*
+ *  Cellvision/SparkLAN NFS-101U/WU support
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include "cellvision.h"
+
+static u8 nfs101_vlans[6] __initdata = { /* TODO: not tested */
+       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
+static void __init nfs101_setup(void)
+{
+       cas6xx_flash_setup();
+       adm5120_add_device_switch(5, nfs101_vlans);
+}
+
+ADM5120_BOARD(MACH_ADM5120_NFS101U, "Cellvision NFS-101U/101WU", nfs101_setup);

diff --git a/target/linux/adm5120/router_le/config-2.6.26 b/target/linux/adm5120/router_le/config-2.6.26
index 968038d..622d741 100644 (file)
--- a/target/linux/adm5120/router_le/config-2.6.26
+++ b/target/linux/adm5120/router_le/config-2.6.26
@@ -11,6 +11,7 @@ CONFIG_ADM5120_MACH_EASY5120P_ATA=y
 CONFIG_ADM5120_MACH_EASY5120_RT=y
 CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
 CONFIG_ADM5120_MACH_EASY83000=y
+CONFIG_ADM5120_MACH_NFS_101=y
 CONFIG_ADM5120_MACH_NP27G=y
 CONFIG_ADM5120_MACH_NP28G=y
 CONFIG_ADM5120_MACH_RB_11X=y