--- /dev/null
+diff -urN linux.old/drivers/net/Kconfig linux.net/drivers/net/Kconfig
+--- linux.old/drivers/net/Kconfig 2006-01-21 20:15:08.279272000 +0100
++++ linux.net/drivers/net/Kconfig 2006-01-30 01:18:34.910315000 +0100
+@@ -176,6 +176,13 @@
+
+ source "drivers/net/arm/Kconfig"
+
++
++config AR2313
++ tristate "AR2313 Ethernet support"
++ depends on NET_ETHERNET && MACH_ARUBA
++ help
++ Support for the AR2313 Ethernet part on Aruba AP60/61
++
+ config IDT_RC32434_ETH
+ tristate "IDT RC32434 Local Ethernet support"
+ depends on NET_ETHERNET
+diff -urN linux.old/drivers/net/Makefile linux.net/drivers/net/Makefile
+--- linux.old/drivers/net/Makefile 2006-01-21 20:15:08.383226000 +0100
++++ linux.net/drivers/net/Makefile 2006-01-30 01:18:34.914315250 +0100
+@@ -35,6 +35,7 @@
+
+ obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
+
++obj-$(CONFIG_AR2313) += ar2313.o
+ obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
+ obj-$(CONFIG_DGRS) += dgrs.o
+ obj-$(CONFIG_VORTEX) += 3c59x.o
+diff -urN linux.old/drivers/net/ar2313/ar2313.h linux.net/drivers/net/ar2313/ar2313.h
+--- linux.old/drivers/net/ar2313/ar2313.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.net/drivers/net/ar2313/ar2313.h 2006-01-25 00:35:55.000000000 +0100
+@@ -0,0 +1,190 @@
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <linux/config.h>
++#include <asm/bootinfo.h>
++#include "platform.h"
++
++extern unsigned long mips_machtype;
++
++#undef ETHERNET_BASE
++#define ETHERNET_BASE ar_eth_base
++#define ETHERNET_SIZE 0x00100000
++#define ETHERNET_MACS 2
++
++#undef DMA_BASE
++#define DMA_BASE ar_dma_base
++#define DMA_SIZE 0x00100000
++
++
++/*
++ * probe link timer - 5 secs
++ */
++#define LINK_TIMER (5*HZ)
++
++/*
++ * Interrupt register base address
++ */
++#define INTERRUPT_BASE PHYS_TO_K1(ar_int_base)
++
++/*
++ * Reset Register
++ */
++#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
++#define RESET_SYSTEM 0x00000001 /* cold reset full system */
++#define RESET_PROC 0x00000002 /* cold reset MIPS core */
++#define RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
++#define RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
++#define RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
++#define RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
++#define RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
++
++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
++
++#ifndef K1_TO_PHYS
++// hack
++#define K1_TO_PHYS(x) (((unsigned int)(x)) & 0x1FFFFFFF) /* kseg1 to physical */
++#endif
++
++#ifndef PHYS_TO_K1
++// hack
++#define PHYS_TO_K1(x) (((unsigned int)(x)) | 0xA0000000) /* physical to kseg1 */
++#endif
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/*
++ * Rings
++ */
++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++static inline int tx_space (u32 csm, u32 prd)
++{
++ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
++}
++
++#if MAX_SKB_FRAGS
++#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
++#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
++#else
++#define tx_ring_full 0
++#endif
++
++#define AR2313_MBGET 2
++#define AR2313_MBSET 3
++#define AR2313_PCI_RECONFIG 4
++#define AR2313_PCI_DUMP 5
++#define AR2313_TEST_PANIC 6
++#define AR2313_TEST_NULLPTR 7
++#define AR2313_READ_DATA 8
++#define AR2313_WRITE_DATA 9
++#define AR2313_GET_VERSION 10
++#define AR2313_TEST_HANG 11
++#define AR2313_SYNC 12
++
++
++struct ar2313_cmd {
++ u32 cmd;
++ u32 address; /* virtual address of image */
++ u32 length; /* size of image to download */
++ u32 mailbox; /* mailbox to get/set */
++ u32 data[2]; /* contents of mailbox to read/write */
++};
++
++
++/*
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar2313_private
++{
++ int version;
++ u32 mb[2];
++
++ volatile ETHERNET_STRUCT *eth_regs;
++ volatile DMA *dma_regs;
++ volatile u32 *int_regs;
++
++ spinlock_t lock; /* Serialise access to device */
++
++ /*
++ * RX and TX descriptors, must be adjacent
++ */
++ ar2313_descr_t *rx_ring;
++ ar2313_descr_t *tx_ring;
++
++
++ struct sk_buff **rx_skb;
++ struct sk_buff **tx_skb;
++
++ /*
++ * RX elements
++ */
++ u32 rx_skbprd;
++ u32 cur_rx;
++
++ /*
++ * TX elements
++ */
++ u32 tx_prd;
++ u32 tx_csm;
++
++ /*
++ * Misc elements
++ */
++ int board_idx;
++ char name[48];
++ struct net_device_stats stats;
++ struct {
++ u32 address;
++ u32 length;
++ char *mapping;
++ } desc;
++
++
++ struct timer_list link_timer;
++ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
++ unsigned short mac;
++ unsigned short link; /* 0 - link down, 1 - link up */
++ u16 phyData;
++
++ struct tasklet_struct rx_tasklet;
++ int unloading;
++};
++
++
++/*
++ * Prototypes
++ */
++static int ar2313_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar2313_tx_timeout(struct net_device *dev);
++#endif
++#if 0
++static void ar2313_multicast_list(struct net_device *dev);
++#endif
++static int ar2313_restart(struct net_device *dev);
++#if DEBUG
++static void ar2313_dump_regs(struct net_device *dev);
++#endif
++static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar2313_interrupt(int irq, void *dev_id, struct pt_regs *regs);
++static int ar2313_open(struct net_device *dev);
++static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar2313_close(struct net_device *dev);
++static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++static void ar2313_init_cleanup(struct net_device *dev);
++static int ar2313_setup_timer(struct net_device *dev);
++static void ar2313_link_timer_fn(unsigned long data);
++static void ar2313_check_link(struct net_device *dev);
++static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
++#endif /* _AR2313_H_ */
+diff -urN linux.old/drivers/net/ar2313/ar2313_msg.h linux.net/drivers/net/ar2313/ar2313_msg.h
+--- linux.old/drivers/net/ar2313/ar2313_msg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.net/drivers/net/ar2313/ar2313_msg.h 2006-01-24 22:57:25.000000000 +0100
+@@ -0,0 +1,17 @@
++#ifndef _AR2313_MSG_H_
++#define _AR2313_MSG_H_
++
++#define AR2313_MTU 1692
++#define AR2313_PRIOS 1
++#define AR2313_QUEUES (2*AR2313_PRIOS)
++
++#define AR2313_DESCR_ENTRIES 64
++
++typedef struct {
++ volatile unsigned int status; // OWN, Device control and status.
++ volatile unsigned int devcs; // pkt Control bits + Length
++ volatile unsigned int addr; // Current Address.
++ volatile unsigned int descr; // Next descriptor in chain.
++} ar2313_descr_t;
++
++#endif /* _AR2313_MSG_H_ */
+diff -urN linux.old/drivers/net/ar2313/dma.h linux.net/drivers/net/ar2313/dma.h
+--- linux.old/drivers/net/ar2313/dma.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.net/drivers/net/ar2313/dma.h 2006-01-24 22:58:45.000000000 +0100
+@@ -0,0 +1,135 @@
++#ifndef __ARUBA_DMA_H__
++#define __ARUBA_DMA_H__
++
++/*******************************************************************************
++ *
++ * Copyright 2002 Integrated Device Technology, Inc.
++ * All rights reserved.
++ *
++ * DMA register definition.
++ *
++ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
++ *
++ * Author : ryan.holmQVist@idt.com
++ * Date : 20011005
++ * Update :
++ * $Log: dma.h,v $
++ * Revision 1.3 2002/06/06 18:34:03 astichte
++ * Added XXX_PhysicalAddress and XXX_VirtualAddress
++ *
++ * Revision 1.2 2002/06/05 18:30:46 astichte
++ * Removed IDTField
++ *
++ * Revision 1.1 2002/05/29 17:33:21 sysarch
++ * jba File moved from vcode/include/idt/acacia
++ *
++ *
++ ******************************************************************************/
++
++#define AR_BIT(x) (1 << (x))
++#define DMA_RX_ERR_CRC AR_BIT(1)
++#define DMA_RX_ERR_DRIB AR_BIT(2)
++#define DMA_RX_ERR_MII AR_BIT(3)
++#define DMA_RX_EV2 AR_BIT(5)
++#define DMA_RX_ERR_COL AR_BIT(6)
++#define DMA_RX_LONG AR_BIT(7)
++#define DMA_RX_LS AR_BIT(8) /* last descriptor */
++#define DMA_RX_FS AR_BIT(9) /* first descriptor */
++#define DMA_RX_MF AR_BIT(10) /* multicast frame */
++#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
++#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
++#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
++#define DMA_RX_ERROR AR_BIT(15) /* error summary */
++#define DMA_RX_LEN_MASK 0x3fff0000
++#define DMA_RX_LEN_SHIFT 16
++#define DMA_RX_FILT AR_BIT(30)
++#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK 0x000007ff
++#define DMA_RX1_BSIZE_SHIFT 0
++#define DMA_RX1_CHAINED AR_BIT(24)
++#define DMA_RX1_RER AR_BIT(25)
++
++#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
++#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
++#define DMA_TX_COL_MASK 0x78
++#define DMA_TX_COL_SHIFT 3
++#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
++#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
++#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
++#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
++#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
++#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
++#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
++#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK 0x000007ff
++#define DMA_TX1_BSIZE_SHIFT 0
++#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
++#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
++#define DMA_TX1_FS AR_BIT(29) /* first segment */
++#define DMA_TX1_LS AR_BIT(30) /* last segment */
++#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
++
++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
++
++#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
++#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
++#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check*/
++#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
++#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
++#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
++#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
++#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
++#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
++#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
++#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
++#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
++#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames only) */
++#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
++#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
++#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
++#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
++#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY AR_BIT(0)
++#define MII_ADDR_WRITE AR_BIT(1)
++#define MII_ADDR_REG_SHIFT 6
++#define MII_ADDR_PHY_SHIFT 11
++#define MII_DATA_SHIFT 0
++
++#define FLOW_CONTROL_FCE AR_BIT(1)
++
++#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
++#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
++
++#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
++#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
++#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
++#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
++#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
++#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
++#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
++#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
++#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
++#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
++#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
++#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
++#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
++#define DMA_STATUS_EB_SHIFT 23 /* error bits */
++
++#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
++#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
++#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
++
++#endif // __ARUBA_DMA_H__
++
++
++
++
++
+diff -urN linux.old/drivers/net/ar2313/platform.h linux.net/drivers/net/ar2313/platform.h
+--- linux.old/drivers/net/ar2313/platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.net/drivers/net/ar2313/platform.h 2006-01-25 00:10:25.000000000 +0100
+@@ -0,0 +1,128 @@
++/********************************************************************************
++ Title: $Source: platform.h,v $
++
++ Author: Dan Steinberg
++ Copyright Integrated Device Technology 2001
++
++ Purpose: AR2313 Register/Bit Definitions
++
++ Update:
++ $Log: platform.h,v $
++
++ Notes: See Merlot architecture spec for complete details. Note, all
++ addresses are virtual addresses in kseg1 (Uncached, Unmapped).
++
++********************************************************************************/
++
++#ifndef PLATFORM_H
++#define PLATFORM_H
++
++#define BIT(x) (1 << (x))
++
++#define RESET_BASE 0xBC003020
++#define RESET_VALUE 0x00000001
++
++/********************************************************************
++ * Device controller
++ ********************************************************************/
++typedef struct {
++ volatile unsigned int flash0;
++} DEVICE;
++
++#define device (*((volatile DEVICE *) DEV_CTL_BASE))
++
++// DDRC register
++#define DEV_WP (1<<26)
++
++/********************************************************************
++ * DDR controller
++ ********************************************************************/
++typedef struct {
++ volatile unsigned int ddrc0;
++ volatile unsigned int ddrc1;
++ volatile unsigned int ddrrefresh;
++} DDR;
++
++#define ddr (*((volatile DDR *) DDR_BASE))
++
++// DDRC register
++#define DDRC_CS(i) ((i&0x3)<<0)
++#define DDRC_WE (1<<2)
++
++/********************************************************************
++ * Ethernet interfaces
++ ********************************************************************/
++#define ETHERNET_BASE 0xB8200000
++
++//
++// New Combo structure for Both Eth0 AND eth1
++//
++typedef struct {
++ volatile unsigned int mac_control; /* 0x00 */
++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08*/
++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
++ volatile unsigned int mii_addr; /* 0x14 */
++ volatile unsigned int mii_data; /* 0x18 */
++ volatile unsigned int flow_control; /* 0x1c */
++ volatile unsigned int vlan_tag; /* 0x20 */
++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
++
++} ETHERNET_STRUCT;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++ volatile unsigned int wdog_control; /* 0x08 */
++ volatile unsigned int wdog_timer; /* 0x0c */
++ volatile unsigned int misc_status; /* 0x10 */
++ volatile unsigned int misc_mask; /* 0x14 */
++ volatile unsigned int global_status; /* 0x18 */
++ volatile unsigned int reserved; /* 0x1c */
++ volatile unsigned int reset_control; /* 0x20 */
++} INTERRUPT;
++
++#define interrupt (*((volatile INTERRUPT *) INTERRUPT_BASE))
++
++#define INTERRUPT_MISC_TIMER BIT(0)
++#define INTERRUPT_MISC_AHBPROC BIT(1)
++#define INTERRUPT_MISC_AHBDMA BIT(2)
++#define INTERRUPT_MISC_GPIO BIT(3)
++#define INTERRUPT_MISC_UART BIT(4)
++#define INTERRUPT_MISC_UARTDMA BIT(5)
++#define INTERRUPT_MISC_WATCHDOG BIT(6)
++#define INTERRUPT_MISC_LOCAL BIT(7)
++
++#define INTERRUPT_GLOBAL_ETH BIT(2)
++#define INTERRUPT_GLOBAL_WLAN BIT(3)
++#define INTERRUPT_GLOBAL_MISC BIT(4)
++#define INTERRUPT_GLOBAL_ITIMER BIT(5)
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++#define DMA_BASE 0xB8201000
++
++typedef struct {
++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
++ volatile unsigned int status; /* 0x14 (CSR5) */
++ volatile unsigned int control; /* 0x18 (CSR6) */
++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
++} DMA;
++
++#define dma (*((volatile DMA *) DMA_BASE))
++
++// macro to convert from virtual to physical address
++#define phys_addr(x) (x & 0x1fffffff)
++
++#endif /* PLATFORM_H */
+diff -urN linux.old/drivers/net/ar2313.c linux.net/drivers/net/ar2313.c
+--- linux.old/drivers/net/ar2313.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.net/drivers/net/ar2313.c 2006-01-30 01:21:56.822933750 +0100
+@@ -0,0 +1,1642 @@
++/*
++ * ar2313.c: Linux driver for the Atheros AR2313 Ethernet device.
++ *
++ * Copyright 2004 by Sameer Dekate, <sdekate@arubanetworks.com>.
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * This code is taken from John Taylor's Sibyte driver and then
++ * modified for the AR2313.
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/sockios.h>
++#include <linux/pkt_sched.h>
++#include <linux/compile.h>
++#include <linux/mii.h>
++#include <linux/ethtool.h>
++#include <linux/ctype.h>
++
++#include <net/sock.h>
++#include <net/ip.h>
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/byteorder.h>
++#include <asm/uaccess.h>
++#include <asm/bootinfo.h>
++
++extern char *getenv(char *e);
++
++
++#undef INDEX_DEBUG
++#define DEBUG 0
++#define DEBUG_TX 0
++#define DEBUG_RX 0
++#define DEBUG_INT 0
++#define DEBUG_MC 0
++#define DEBUG_ERR 1
++
++#ifndef __exit
++#define __exit
++#endif
++
++#ifndef min
++#define min(a,b) (((a)<(b))?(a):(b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES L1_CACHE_BYTES
++#endif
++
++#ifndef SET_MODULE_OWNER
++#define SET_MODULE_OWNER(dev) {do{} while(0);}
++#define AR2313_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
++#define AR2313_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
++#else
++#define AR2313_MOD_INC_USE_COUNT {do{} while(0);}
++#define AR2313_MOD_DEC_USE_COUNT {do{} while(0);}
++#endif
++
++#define PHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
++
++MODULE_PARM(ethaddr, "s");
++static char *ethaddr = "00:00:00:00:00:00";
++MODULE_PARM(ifname, "s");
++static char *ifname = "bond" ;
++
++#define AR2313_MBOX_SET_BIT 0x8
++
++#define BOARD_IDX_STATIC 0
++#define BOARD_IDX_OVERFLOW -1
++
++/* margot includes */
++#include <asm/idt-boards/rc32434/rc32434.h>
++
++#include "ar2313/ar2313_msg.h"
++#include "ar2313/platform.h"
++#include "ar2313/dma.h"
++#include "ar2313/ar2313.h"
++
++/*
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
++ * the buffers in the interrupt handler
++ * RX_RING_THRES - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers. This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/*
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES (RX_RING_SIZE/4)
++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
++#define CRC_LEN 4
++#define RX_OFFSET 2
++
++#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
++
++#ifdef MODULE
++MODULE_AUTHOR("Sameer Dekate<sdekate@arubanetworks.com>");
++MODULE_DESCRIPTION("AR2313 Ethernet driver");
++#endif
++
++#if DEBUG
++static char version[] __initdata =
++ "ar2313.c: v0.01 2004/01/06 sdekate@arubanetworks.com\n";
++#endif /* DEBUG */
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++// prototypes
++static short armiiread(short phy, short reg);
++static void armiiwrite(short phy, short reg, short data);
++#ifdef TX_TIMEOUT
++static void ar2313_tx_timeout(struct net_device *dev);
++#endif
++static void ar2313_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void ar2313_multicast_list(struct net_device *dev);
++
++static struct net_device *root_dev;
++static int probed __initdata = 0;
++static unsigned long ar_eth_base;
++static unsigned long ar_dma_base;
++static unsigned long ar_int_base;
++static unsigned long ar_int_mac_mask;
++static unsigned long ar_int_phy_mask;
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++static int parse_mac_addr(struct net_device *dev, char* macstr){
++ int i, j;
++ unsigned char result, value;
++
++ for (i=0; i<6; i++) {
++ result = 0;
++ if (i != 5 && *(macstr+2) != ':') {
++ ERR("invalid mac address format: %d %c\n",
++ i, *(macstr+2));
++ return -EINVAL;
++ }
++ for (j=0; j<2; j++) {
++ if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
++ toupper(*macstr)-'A'+10) < 16)
++ {
++ result = result*16 + value;
++ macstr++;
++ }
++ else {
++ ERR("invalid mac address "
++ "character: %c\n", *macstr);
++ return -EINVAL;
++ }
++ }
++
++ macstr++;
++ dev->dev_addr[i] = result;
++ }
++
++ return 0;
++}
++
++
++int __init ar2313_probe(void)
++{
++ struct net_device *dev;
++ struct ar2313_private *sp;
++ int version_disp;
++ char name[64] ;
++
++ if (probed)
++ return -ENODEV;
++ probed++;
++
++ version_disp = 0;
++ sprintf(name, "%s%%d", ifname) ;
++ dev = alloc_etherdev(sizeof(struct ar2313_private));
++
++ if (dev == NULL) {
++ printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
++ return -ENOMEM;
++ }
++
++ SET_MODULE_OWNER(dev);
++
++ sp = dev->priv;
++
++ sp->link = 0;
++ switch (mips_machtype) {
++ case MACH_ARUBA_AP60:
++ ar_eth_base = 0xb8100000;
++ ar_dma_base = ar_eth_base + 0x1000;
++ ar_int_base = 0x1C003020;
++ ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
++ ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
++ sp->mac = 1;
++ sp->phy = 1;
++ dev->irq = 4;
++ break;
++
++ case MACH_ARUBA_AP40:
++ ar_eth_base = 0xb0500000;
++ ar_dma_base = ar_eth_base + 0x1000;
++ ar_int_base = 0x11000004;
++ ar_int_mac_mask = 0x800;
++ ar_int_phy_mask = 0x400;
++ sp->mac = 0;
++ sp->phy = 1;
++ dev->irq = 4;
++ break;
++
++ case MACH_ARUBA_AP65:
++ ar_eth_base = 0xb8100000;
++ ar_dma_base = ar_eth_base + 0x1000;
++ ar_int_base = 0x1C003020;
++ ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
++ ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
++ sp->mac = 0;
++#if 0
++ // commented out, for now
++
++ if (mips_machtype == MACH_ARUBA_SAMSUNG) {
++ sp->phy = 0x1f;
++ } else {
++ sp->phy = 1;
++ }
++#else
++ sp->phy = 1;
++#endif
++ dev->irq = 3;
++ break;
++
++ default:
++ printk("%s: unsupported mips_machtype=0x%lx\n",
++ __FUNCTION__, mips_machtype) ;
++ return -ENODEV;
++ }
++
++ spin_lock_init(&sp->lock);
++
++ /* initialize func pointers */
++ dev->open = &ar2313_open;
++ dev->stop = &ar2313_close;
++ dev->hard_start_xmit = &ar2313_start_xmit;
++
++ dev->get_stats = &ar2313_get_stats;
++ dev->set_multicast_list = &ar2313_multicast_list;
++#ifdef TX_TIMEOUT
++ dev->tx_timeout = ar2313_tx_timeout;
++ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
++#endif
++ dev->do_ioctl = &ar2313_ioctl;
++
++ // SAMEER: do we need this?
++ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
++
++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
++ tasklet_disable(&sp->rx_tasklet);
++
++ /* display version info if adapter is found */
++ if (!version_disp) {
++ /* set display flag to TRUE so that */
++ /* we only display this string ONCE */
++ version_disp = 1;
++#if DEBUG
++ printk(version);
++#endif /* DEBUG */
++ }
++
++ request_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS,
++ "AR2313ENET");
++
++ sp->eth_regs = ioremap_nocache(PHYSADDR(ETHERNET_BASE + ETHERNET_SIZE*sp->mac),
++ sizeof(*sp->eth_regs));
++ if (!sp->eth_regs) {
++ printk("Can't remap eth registers\n");
++ return(-ENXIO);
++ }
++
++ sp->dma_regs = ioremap_nocache(PHYSADDR(DMA_BASE + DMA_SIZE*sp->mac),
++ sizeof(*sp->dma_regs));
++ dev->base_addr = (unsigned int) sp->dma_regs;
++ if (!sp->dma_regs) {
++ printk("Can't remap DMA registers\n");
++ return(-ENXIO);
++ }
++
++ sp->int_regs = ioremap_nocache(PHYSADDR(INTERRUPT_BASE),
++ sizeof(*sp->int_regs));
++ if (!sp->int_regs) {
++ printk("Can't remap INTERRUPT registers\n");
++ return(-ENXIO);
++ }
++
++ strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
++ sp->name [sizeof (sp->name) - 1] = '\0';
++
++ {
++ char mac[32];
++ extern char *getenv(char *e);
++ unsigned char def_mac[6] = {0, 0x0b, 0x86, 0xba, 0xdb, 0xad};
++ memset(mac, 0, 32);
++ memcpy(mac, getenv("ethaddr"), 17);
++ if (parse_mac_addr(dev, mac)){
++ printk("%s: MAC address not found, using default\n", __func__);
++ memcpy(dev->dev_addr, def_mac, 6);
++ }
++ }
++
++ sp->board_idx = BOARD_IDX_STATIC;
++
++ if (ar2313_init(dev)) {
++ /*
++ * ar2313_init() calls ar2313_init_cleanup() on error.
++ */
++ kfree(dev);
++ return -ENODEV;
++ }
++
++ if (register_netdev(dev)){
++ printk("%s: register_netdev failed\n", __func__);
++ return -1;
++ }
++
++ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
++ dev->name, sp->name,
++ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
++ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
++ dev->irq);
++
++ /* start link poll timer */
++ ar2313_setup_timer(dev);
++
++ /*
++ * Register the device
++ */
++ root_dev = dev;
++
++ return 0;
++}
++
++#if 0
++static void ar2313_dump_regs(struct net_device *dev)
++{
++ unsigned int *ptr, i;
++ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
++
++ ptr = (unsigned int *)sp->eth_regs;
++ for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
++ printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
++ }
++
++ ptr = (unsigned int *)sp->dma_regs;
++ for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
++ printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
++ }
++
++ ptr = (unsigned int *)sp->int_regs;
++ for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
++ printk("INT: %08x = %08x\n", (int)ptr, *ptr);
++ }
++
++ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
++ ar2313_descr_t *td = &sp->tx_ring[i];
++ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
++ td->status, td->devcs, td->addr, td->descr);
++ }
++}
++#endif
++
++#ifdef TX_TIMEOUT
++static void
++ar2313_tx_timeout(struct net_device *dev)
++{
++ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
++ unsigned long flags;
++
++#if DEBUG_TX
++ printk("Tx timeout\n");
++#endif
++ spin_lock_irqsave(&sp->lock, flags);
++ ar2313_restart(dev);
++ spin_unlock_irqrestore(&sp->lock, flags);
++}
++#endif
++
++#if DEBUG_MC
++static void
++printMcList(struct net_device *dev)
++{
++ struct dev_mc_list *list = dev->mc_list;
++ int num=0, i;
++ while(list){
++ printk("%d MC ADDR ", num);
++ for(i=0;i<list->dmi_addrlen;i++) {
++ printk(":%02x", list->dmi_addr[i]);
++ }
++ list = list->next;
++ printk("\n");
++ }
++}
++#endif
++
++/*
++ * Set or clear the multicast filter for this adaptor.
++ * THIS IS ABSOLUTE CRAP, disabled
++ */
++static void
++ar2313_multicast_list(struct net_device *dev)
++{
++ /*
++ * Always listen to broadcasts and
++ * treat IFF bits independently
++ */
++ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
++ unsigned int recognise;
++
++ recognise = sp->eth_regs->mac_control;
++
++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
++ recognise |= MAC_CONTROL_PR;
++ } else {
++ recognise &= ~MAC_CONTROL_PR;
++ }
++
++ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
++#if DEBUG_MC
++ printMcList(dev);
++ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
++#endif
++ recognise |= MAC_CONTROL_PM;/* all multicast */
++ } else if (dev->mc_count > 0) {
++#if DEBUG_MC
++ printMcList(dev);
++ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
++#endif
++ recognise |= MAC_CONTROL_PM; /* for the time being */
++ }
++#if DEBUG_MC
++ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
++#endif
++
++ sp->eth_regs->mac_control = recognise;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++
++ /*
++ * Tasklet may be scheduled. Need to get it removed from the list
++ * since we're about to free the struct.
++ */
++
++ sp->unloading = 1;
++ tasklet_enable(&sp->rx_tasklet);
++ tasklet_kill(&sp->rx_tasklet);
++}
++
++static void __exit ar2313_module_cleanup(void)
++{
++ rx_tasklet_cleanup(root_dev);
++ ar2313_init_cleanup(root_dev);
++ unregister_netdev(root_dev);
++ kfree(root_dev);
++ release_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS);
++}
++
++
++/*
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar2313_restart(struct net_device *dev)
++{
++ /* disable interrupts */
++ disable_irq(dev->irq);
++
++ /* stop mac */
++ ar2313_halt(dev);
++
++ /* initialize */
++ ar2313_init(dev);
++
++ /* enable interrupts */
++ enable_irq(dev->irq);
++
++ return 0;
++}
++
++extern unsigned long mips_machtype;
++
++int __init ar2313_module_init(void)
++{
++ int status=-1;
++ switch (mips_machtype){
++ case MACH_ARUBA_AP60:
++ case MACH_ARUBA_AP65:
++ case MACH_ARUBA_AP40:
++ root_dev = NULL;
++ status = ar2313_probe();
++ break;
++ }
++ return status;
++}
++
++
++module_init(ar2313_module_init);
++module_exit(ar2313_module_cleanup);
++
++
++static void ar2313_free_descriptors(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ if (sp->rx_ring != NULL) {
++ kfree((void*)KSEG0ADDR(sp->rx_ring));
++ sp->rx_ring = NULL;
++ sp->tx_ring = NULL;
++ }
++}
++
++
++static int ar2313_allocate_descriptors(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ int size;
++ int j;
++ ar2313_descr_t *space;
++
++ if(sp->rx_ring != NULL){
++ printk("%s: already done.\n", __FUNCTION__);
++ return 0;
++ }
++
++ size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
++ space = kmalloc(size, GFP_KERNEL);
++ if (space == NULL)
++ return 1;
++
++ /* invalidate caches */
++ dma_cache_inv((unsigned int)space, size);
++
++ /* now convert pointer to KSEG1 */
++ space = (ar2313_descr_t *)KSEG1ADDR(space);
++
++ memset((void *)space, 0, size);
++
++ sp->rx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ sp->tx_ring = space;
++ space += AR2313_DESCR_ENTRIES;
++
++ /* Initialize the transmit Descriptors */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ ar2313_descr_t *td = &sp->tx_ring[j];
++ td->status = 0;
++ td->devcs = DMA_TX1_CHAINED;
++ td->addr = 0;
++ td->descr = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
++ }
++
++ return 0;
++}
++
++
++/*
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar2313_init_cleanup(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ struct sk_buff *skb;
++ int j;
++
++ ar2313_free_descriptors(dev);
++
++ if (sp->eth_regs) iounmap((void*)sp->eth_regs);
++ if (sp->dma_regs) iounmap((void*)sp->dma_regs);
++
++ if (sp->rx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->rx_skb[j];
++ if (skb) {
++ sp->rx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->rx_skb);
++ sp->rx_skb = NULL;
++ }
++
++ if (sp->tx_skb) {
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ skb = sp->tx_skb[j];
++ if (skb) {
++ sp->tx_skb[j] = NULL;
++ dev_kfree_skb(skb);
++ }
++ }
++ kfree(sp->tx_skb);
++ sp->tx_skb = NULL;
++ }
++}
++
++static int ar2313_setup_timer(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++
++ init_timer(&sp->link_timer);
++
++ sp->link_timer.function = ar2313_link_timer_fn;
++ sp->link_timer.data = (int) dev;
++ sp->link_timer.expires = jiffies + HZ;
++
++ add_timer(&sp->link_timer);
++ return 0;
++
++}
++
++static void ar2313_link_timer_fn(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ar2313_private *sp = dev->priv;
++
++ // see if the link status changed
++ // This was needed to make sure we set the PHY to the
++ // autonegotiated value of half or full duplex.
++ ar2313_check_link(dev);
++
++ // Loop faster when we don't have link.
++ // This was needed to speed up the AP bootstrap time.
++ if(sp->link == 0) {
++ mod_timer(&sp->link_timer, jiffies + HZ/2);
++ } else {
++ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
++ }
++}
++
++static void ar2313_check_link(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ u16 phyData;
++
++ phyData = armiiread(sp->phy, MII_BMSR);
++ if (sp->phyData != phyData) {
++ if (phyData & BMSR_LSTATUS) {
++ /* link is present, ready link partner ability to deterine duplexity */
++ int duplex = 0;
++ u16 reg;
++
++ sp->link = 1;
++ reg = armiiread(sp->phy, MII_BMCR);
++ if (reg & BMCR_ANENABLE) {
++ /* auto neg enabled */
++ reg = armiiread(sp->phy, MII_LPA);
++ duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
++ } else {
++ /* no auto neg, just read duplex config */
++ duplex = (reg & BMCR_FULLDPLX)? 1:0;
++ }
++
++ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
++ (duplex)? "full":"half");
++
++ if (duplex) {
++ /* full duplex */
++ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
++ ~MAC_CONTROL_DRO);
++ } else {
++ /* half duplex */
++ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
++ ~MAC_CONTROL_F);
++ }
++ } else {
++ /* no link */
++ sp->link = 0;
++ }
++ sp->phyData = phyData;
++ }
++}
++
++static int
++ar2313_reset_reg(struct net_device *dev)
++{
++ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
++ unsigned int ethsal, ethsah;
++ unsigned int flags;
++
++ *sp->int_regs |= ar_int_mac_mask;
++ mdelay(10);
++ *sp->int_regs &= ~ar_int_mac_mask;
++ mdelay(10);
++ *sp->int_regs |= ar_int_phy_mask;
++ mdelay(10);
++ *sp->int_regs &= ~ar_int_phy_mask;
++ mdelay(10);
++
++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++ mdelay(10);
++ sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++ /* enable interrupts */
++ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
++ DMA_STATUS_NIS |
++ DMA_STATUS_RI |
++ DMA_STATUS_TI |
++ DMA_STATUS_FBE);
++ sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
++ sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
++ sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++ sp->eth_regs->vlan_tag = (0x8100);
++
++ /* Enable Ethernet Interface */
++ flags = (MAC_CONTROL_TE | /* transmit enable */
++ MAC_CONTROL_PM | /* pass mcast */
++ MAC_CONTROL_F | /* full duplex */
++ MAC_CONTROL_HBD); /* heart beat disabled */
++
++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
++ flags |= MAC_CONTROL_PR;
++ }
++ sp->eth_regs->mac_control = flags;
++
++ /* Set all Ethernet station address registers to their initial values */
++ ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
++ (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
++
++ ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
++ (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
++ (((u_int)(dev->dev_addr[1]) << 8) & (u_int)0x0000FF00) |
++ (((u_int)(dev->dev_addr[0]) << 0) & (u_int)0x000000FF) );
++
++ sp->eth_regs->mac_addr[0] = ethsah;
++ sp->eth_regs->mac_addr[1] = ethsal;
++
++ mdelay(10);
++
++ return(0);
++}
++
++
++static int ar2313_init(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ int ecode=0;
++
++ /*
++ * Allocate descriptors
++ */
++ if (ar2313_allocate_descriptors(dev)) {
++ printk("%s: %s: ar2313_allocate_descriptors failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++
++ /*
++ * Get the memory for the skb rings.
++ */
++ if(sp->rx_skb == NULL) {
++ sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
++ if (!(sp->rx_skb)) {
++ printk("%s: %s: rx_skb kmalloc failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ if(sp->tx_skb == NULL) {
++ sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
++ if (!(sp->tx_skb)) {
++ printk("%s: %s: tx_skb kmalloc failed\n",
++ dev->name, __FUNCTION__);
++ ecode = -EAGAIN;
++ goto init_error;
++ }
++ }
++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++ /*
++ * Set tx_csm before we start receiving interrupts, otherwise
++ * the interrupt handler might think it is supposed to process
++ * tx ints before we are up and running, which may cause a null
++ * pointer access in the int handler.
++ */
++ sp->rx_skbprd = 0;
++ sp->cur_rx = 0;
++ sp->tx_prd = 0;
++ sp->tx_csm = 0;
++
++ /*
++ * Zero the stats before starting the interface
++ */
++ memset(&sp->stats, 0, sizeof(sp->stats));
++
++ /*
++ * We load the ring here as there seem to be no way to tell the
++ * firmware to wipe the ring without re-initializing it.
++ */
++ ar2313_load_rx_ring(dev, RX_RING_SIZE);
++
++ /*
++ * Init hardware
++ */
++ ar2313_reset_reg(dev);
++
++ /*
++ * Get the IRQ
++ */
++ ecode = request_irq(dev->irq, &ar2313_interrupt, SA_SHIRQ | SA_INTERRUPT, dev->name, dev);
++ if (ecode) {
++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++ dev->name, __FUNCTION__, dev->irq);
++ goto init_error;
++ }
++
++#if 0
++ // commented out, for now
++
++ if(mips_machtype == MACH_ARUBA_SAMSUNG) {
++ int i;
++ /* configure Marvell 88E6060 */
++ /* reset chip */
++ armiiwrite(0x1f, 0xa, 0xa130);
++ do {
++ udelay(1000);
++ i = armiiread(sp->phy, 0xa);
++ } while (i & 0x8000);
++
++ /* configure MAC address */
++ armiiwrite(sp->phy, 0x1, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
++ armiiwrite(sp->phy, 0x2, dev->dev_addr[2] << 8 | dev->dev_addr[3]);
++ armiiwrite(sp->phy, 0x3, dev->dev_addr[4] << 8 | dev->dev_addr[5]);
++
++ /* set ports to forwarding */
++ armiiwrite(0x18, 0x4, 0x3);
++ armiiwrite(0x1c, 0x4, 0x3);
++ armiiwrite(0x1d, 0x4, 0x3);
++ }
++#endif
++
++ tasklet_enable(&sp->rx_tasklet);
++
++ return 0;
++
++ init_error:
++ ar2313_init_cleanup(dev);
++ return ecode;
++}
++
++/*
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++
++ struct ar2313_private *sp = ((struct net_device *)dev)->priv;
++ short i, idx;
++
++ idx = sp->rx_skbprd;
++
++ for (i = 0; i < nr_bufs; i++) {
++ struct sk_buff *skb;
++ ar2313_descr_t *rd;
++
++ if (sp->rx_skb[idx]) {
++#if DEBUG_RX
++ printk(KERN_INFO "ar2313 rx refill full\n");
++#endif /* DEBUG */
++ break;
++ }
++
++ // partha: create additional room for the second GRE fragment
++ skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
++ if (!skb) {
++ printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
++ break;
++ }
++ // partha: create additional room in the front for tx pkt capture
++ skb_reserve(skb, 32);
++
++ /*
++ * Make sure IP header starts on a fresh cache line.
++ */
++ skb->dev = dev;
++ skb_reserve(skb, RX_OFFSET);
++ sp->rx_skb[idx] = skb;
++
++ rd = (ar2313_descr_t *) &sp->rx_ring[idx];
++
++ /* initialize dma descriptor */
++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rd->addr = virt_to_phys(skb->data);
++ rd->descr = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
++ rd->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ if (!i) {
++#if DEBUG_ERR
++ printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
++#endif /* DEBUG */
++ } else {
++ sp->rx_skbprd = idx;
++ }
++
++ return;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL 64
++
++static int ar2313_rx_int(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ struct sk_buff *skb, *skb_new;
++ ar2313_descr_t *rxdesc;
++ unsigned int status;
++ u32 idx;
++ int pkts = 0;
++ int rval;
++
++ idx = sp->cur_rx;
++
++ /* process at most the entire ring and then wait for another interrupt */
++ while(1) {
++
++ rxdesc = &sp->rx_ring[idx];
++ status = rxdesc->status;
++ if (status & DMA_RX_OWN) {
++ /* SiByte owns descriptor or descr not yet filled in */
++ rval = 0;
++ break;
++ }
++
++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++ rval = 1;
++ break;
++ }
++
++#if DEBUG_RX
++ printk("index %d\n", idx);
++ printk("RX status %08x\n", rxdesc->status);
++ printk("RX devcs %08x\n", rxdesc->devcs );
++ printk("RX addr %08x\n", rxdesc->addr );
++ printk("RX descr %08x\n", rxdesc->descr );
++#endif
++
++ if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
++ (!(status & DMA_RX_LONG))){
++#if DEBUG_RX
++ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
++#endif
++ sp->stats.rx_errors++;
++ sp->stats.rx_dropped++;
++
++ /* add statistics counters */
++ if (status & DMA_RX_ERR_CRC) sp->stats.rx_crc_errors++;
++ if (status & DMA_RX_ERR_COL) sp->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_LENGTH)
++ sp->stats.rx_length_errors++;
++ if (status & DMA_RX_ERR_RUNT) sp->stats.rx_over_errors++;
++ if (status & DMA_RX_ERR_DESC) sp->stats.rx_over_errors++;
++
++ } else {
++ /* alloc new buffer. */
++ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
++ if (skb_new != NULL) {
++
++ skb = sp->rx_skb[idx];
++ /* set skb */
++ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
++
++#ifdef CONFIG_MERLOT
++ if ((dev->am_pkt_handler == NULL) ||
++ (dev->am_pkt_handler(skb, dev) == 0)) {
++#endif
++ sp->stats.rx_bytes += skb->len;
++ skb->protocol = eth_type_trans(skb, dev);
++ /* pass the packet to upper layers */
++
++#ifdef CONFIG_MERLOT
++ if (dev->asap_netif_rx)
++ dev->asap_netif_rx(skb);
++ else
++#endif
++ netif_rx(skb);
++#ifdef CONFIG_MERLOT
++ }
++#endif
++ skb_new->dev = dev;
++ /* 16 bit align */
++ skb_reserve(skb_new, RX_OFFSET+32);
++ /* reset descriptor's curr_addr */
++ rxdesc->addr = virt_to_phys(skb_new->data);
++
++ sp->stats.rx_packets++;
++ sp->rx_skb[idx] = skb_new;
++
++ } else {
++ sp->stats.rx_dropped++;
++ }
++ }
++
++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++ DMA_RX1_CHAINED);
++ rxdesc->status = DMA_RX_OWN;
++
++ idx = DSC_NEXT(idx);
++ }
++
++ sp->cur_rx = idx;
++
++ return rval;
++}
++
++
++static void ar2313_tx_int(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ u32 idx;
++ struct sk_buff *skb;
++ ar2313_descr_t *txdesc;
++ unsigned int status=0;
++
++ idx = sp->tx_csm;
++
++ while (idx != sp->tx_prd) {
++
++ txdesc = &sp->tx_ring[idx];
++
++#if DEBUG_TX
++ printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
++ dev->name, sp->tx_csm, idx, sp->tx_prd,
++ txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
++#endif /* DEBUG */
++
++ if ((status = txdesc->status) & DMA_TX_OWN) {
++ /* ar2313 dma still owns descr */
++ break;
++ }
++ /* done with this descriptor */
++ txdesc->status = 0;
++
++ if (status & DMA_TX_ERROR){
++ sp->stats.tx_errors++;
++ sp->stats.tx_dropped++;
++ if(status & DMA_TX_ERR_UNDER)
++ sp->stats.tx_fifo_errors++;
++ if(status & DMA_TX_ERR_HB)
++ sp->stats.tx_heartbeat_errors++;
++ if(status & (DMA_TX_ERR_LOSS |
++ DMA_TX_ERR_LINK))
++ sp->stats.tx_carrier_errors++;
++ if (status & (DMA_TX_ERR_LATE|
++ DMA_TX_ERR_COL |
++ DMA_TX_ERR_JABBER |
++ DMA_TX_ERR_DEFER))
++ sp->stats.tx_aborted_errors++;
++ } else {
++ /* transmit OK */
++ sp->stats.tx_packets++;
++ }
++
++ skb = sp->tx_skb[idx];
++ sp->tx_skb[idx] = NULL;
++ idx = DSC_NEXT(idx);
++ sp->stats.tx_bytes += skb->len;
++ dev_kfree_skb_irq(skb);
++ }
++
++ sp->tx_csm = idx;
++
++ return;
++}
++
++
++static void
++rx_tasklet_func(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ar2313_private *sp = dev->priv;
++
++ if (sp->unloading) {
++ return;
++ }
++
++ if (ar2313_rx_int(dev)) {
++ tasklet_hi_schedule(&sp->rx_tasklet);
++ }
++ else {
++ unsigned long flags;
++ spin_lock_irqsave(&sp->lock, flags);
++ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++ spin_unlock_irqrestore(&sp->lock, flags);
++ }
++}
++
++static void
++rx_schedule(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++
++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++ tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar2313_interrupt(int irq, void *dev_id, struct pt_regs *ptregs)
++{
++ struct net_device *dev = (struct net_device *)dev_id;
++ struct ar2313_private *sp = dev->priv;
++ unsigned int status, enabled;
++
++ /* clear interrupt */
++ /*
++ * Don't clear RI bit if currently disabled.
++ */
++ status = sp->dma_regs->status;
++ enabled = sp->dma_regs->intr_ena;
++ sp->dma_regs->status = status & enabled;
++
++ if (status & DMA_STATUS_NIS) {
++ /* normal status */
++ /*
++ * Don't schedule rx processing if interrupt
++ * is already disabled.
++ */
++ if (status & enabled & DMA_STATUS_RI) {
++ /* receive interrupt */
++ rx_schedule(dev);
++ }
++ if (status & DMA_STATUS_TI) {
++ /* transmit interrupt */
++ ar2313_tx_int(dev);
++ }
++ }
++
++ if (status & DMA_STATUS_AIS) {
++#if DEBUG_INT
++ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
++ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
++#endif
++ /* abnormal status */
++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
++ ar2313_restart(dev);
++ }
++ }
++ return IRQ_RETVAL(0);
++}
++
++
++static int ar2313_open(struct net_device *dev)
++{
++ struct ar2313_private *sp;
++
++ sp = dev->priv;
++
++ dev->mtu = 1500;
++ netif_start_queue(dev);
++
++ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++ AR2313_MOD_INC_USE_COUNT;
++
++ return 0;
++}
++
++static void ar2313_halt(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ int j;
++
++ tasklet_disable(&sp->rx_tasklet);
++
++ /* kill the MAC */
++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
++ MAC_CONTROL_TE); /* disable Transmits */
++ /* stop dma */
++ sp->dma_regs->control = 0;
++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++ /* place phy and MAC in reset */
++ *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
++
++ /* free buffers on tx ring */
++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++ struct sk_buff *skb;
++ ar2313_descr_t *txdesc;
++
++ txdesc = &sp->tx_ring[j];
++ txdesc->descr = 0;
++
++ skb = sp->tx_skb[j];
++ if (skb) {
++ dev_kfree_skb(skb);
++ sp->tx_skb[j] = NULL;
++ }
++ }
++}
++
++/*
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar2313_open () does not call request_irq (). Worse,
++ * the call to ar2313_halt() generates a WDOG reset due to
++ * the write to 'sp->int_regs' and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar2313_close(struct net_device *dev)
++{
++#if 0
++ /*
++ * Disable interrupts
++ */
++ disable_irq(dev->irq);
++
++ /*
++ * Without (or before) releasing irq and stopping hardware, this
++ * is an absolute non-sense, by the way. It will be reset instantly
++ * by the first irq.
++ */
++ netif_stop_queue(dev);
++
++ /* stop the MAC and DMA engines */
++ ar2313_halt(dev);
++
++ /* release the interrupt */
++ free_irq(dev->irq, dev);
++
++#endif
++ AR2313_MOD_DEC_USE_COUNT;
++ return 0;
++}
++
++static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ ar2313_descr_t *td;
++ u32 idx;
++
++ idx = sp->tx_prd;
++ td = &sp->tx_ring[idx];
++
++ if (td->status & DMA_TX_OWN) {
++#if DEBUG_TX
++ printk("%s: No space left to Tx\n", __FUNCTION__);
++#endif
++ /* free skbuf and lie to the caller that we sent it out */
++ sp->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ /* restart transmitter in case locked */
++ sp->dma_regs->xmt_poll = 0;
++ return 0;
++ }
++
++ /* Setup the transmit descriptor. */
++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++ (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
++ td->addr = virt_to_phys(skb->data);
++ td->status = DMA_TX_OWN;
++
++ /* kick transmitter last */
++ sp->dma_regs->xmt_poll = 0;
++
++#if DEBUG_TX
++ printk("index %d\n", idx);
++ printk("TX status %08x\n", td->status);
++ printk("TX devcs %08x\n", td->devcs );
++ printk("TX addr %08x\n", td->addr );
++ printk("TX descr %08x\n", td->descr );
++#endif
++
++ sp->tx_skb[idx] = skb;
++ idx = DSC_NEXT(idx);
++ sp->tx_prd = idx;
++
++ //dev->trans_start = jiffies;
++
++ return 0;
++}
++
++static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
++{
++ struct ar2313_private *np = dev->priv;
++ u32 tmp;
++
++ ecmd->supported =
++ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
++ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
++ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
++
++ ecmd->port = PORT_TP;
++ /* only supports internal transceiver */
++ ecmd->transceiver = XCVR_INTERNAL;
++ /* not sure what this is for */
++ ecmd->phy_address = 1;
++
++ ecmd->advertising = ADVERTISED_MII;
++ tmp = armiiread(np->phy, MII_ADVERTISE);
++ if (tmp & ADVERTISE_10HALF)
++ ecmd->advertising |= ADVERTISED_10baseT_Half;
++ if (tmp & ADVERTISE_10FULL)
++ ecmd->advertising |= ADVERTISED_10baseT_Full;
++ if (tmp & ADVERTISE_100HALF)
++ ecmd->advertising |= ADVERTISED_100baseT_Half;
++ if (tmp & ADVERTISE_100FULL)
++ ecmd->advertising |= ADVERTISED_100baseT_Full;
++
++ tmp = armiiread(np->phy, MII_BMCR);
++ if (tmp & BMCR_ANENABLE) {
++ ecmd->advertising |= ADVERTISED_Autoneg;
++ ecmd->autoneg = AUTONEG_ENABLE;
++ } else {
++ ecmd->autoneg = AUTONEG_DISABLE;
++ }
++
++ if (ecmd->autoneg == AUTONEG_ENABLE) {
++ tmp = armiiread(np->phy, MII_LPA);
++ if (tmp & (LPA_100FULL|LPA_10FULL)) {
++ ecmd->duplex = DUPLEX_FULL;
++ } else {
++ ecmd->duplex = DUPLEX_HALF;
++ }
++ if (tmp & (LPA_100FULL|LPA_100HALF)) {
++ ecmd->speed = SPEED_100;
++ } else {
++ ecmd->speed = SPEED_10;
++ }
++ } else {
++ if (tmp & BMCR_FULLDPLX) {
++ ecmd->duplex = DUPLEX_FULL;
++ } else {
++ ecmd->duplex = DUPLEX_HALF;
++ }
++ if (tmp & BMCR_SPEED100) {
++ ecmd->speed = SPEED_100;
++ } else {
++ ecmd->speed = SPEED_10;
++ }
++ }
++
++ /* ignore maxtxpkt, maxrxpkt for now */
++
++ return 0;
++}
++
++static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
++{
++ struct ar2313_private *np = dev->priv;
++ u32 tmp;
++
++ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
++ return -EINVAL;
++ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
++ return -EINVAL;
++ if (ecmd->port != PORT_TP)
++ return -EINVAL;
++ if (ecmd->transceiver != XCVR_INTERNAL)
++ return -EINVAL;
++ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
++ return -EINVAL;
++ /* ignore phy_address, maxtxpkt, maxrxpkt for now */
++
++ /* WHEW! now lets bang some bits */
++
++ tmp = armiiread(np->phy, MII_BMCR);
++ if (ecmd->autoneg == AUTONEG_ENABLE) {
++ /* turn on autonegotiation */
++ tmp |= BMCR_ANENABLE;
++ printk("%s: Enabling auto-neg\n", dev->name);
++ } else {
++ /* turn off auto negotiation, set speed and duplexity */
++ tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
++ if (ecmd->speed == SPEED_100)
++ tmp |= BMCR_SPEED100;
++ if (ecmd->duplex == DUPLEX_FULL)
++ tmp |= BMCR_FULLDPLX;
++ printk("%s: Hard coding %d/%s\n", dev->name,
++ (ecmd->speed == SPEED_100)? 100:10,
++ (ecmd->duplex == DUPLEX_FULL)? "full":"half");
++ }
++ armiiwrite(np->phy, MII_BMCR, tmp);
++ np->phyData = 0;
++ return 0;
++}
++
++static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
++{
++ struct ar2313_private *np = dev->priv;
++ u32 cmd;
++
++ if (get_user(cmd, (u32 *)useraddr))
++ return -EFAULT;
++
++ switch (cmd) {
++ /* get settings */
++ case ETHTOOL_GSET: {
++ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++ spin_lock_irq(&np->lock);
++ netdev_get_ecmd(dev, &ecmd);
++ spin_unlock_irq(&np->lock);
++ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++ return -EFAULT;
++ return 0;
++ }
++ /* set settings */
++ case ETHTOOL_SSET: {
++ struct ethtool_cmd ecmd;
++ int r;
++ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++ return -EFAULT;
++ spin_lock_irq(&np->lock);
++ r = netdev_set_ecmd(dev, &ecmd);
++ spin_unlock_irq(&np->lock);
++ return r;
++ }
++ /* restart autonegotiation */
++ case ETHTOOL_NWAY_RST: {
++ int tmp;
++ int r = -EINVAL;
++ /* if autoneg is off, it's an error */
++ tmp = armiiread(np->phy, MII_BMCR);
++ if (tmp & BMCR_ANENABLE) {
++ tmp |= (BMCR_ANRESTART);
++ armiiwrite(np->phy, MII_BMCR, tmp);
++ r = 0;
++ }
++ return r;
++ }
++ /* get link status */
++ case ETHTOOL_GLINK: {
++ struct ethtool_value edata = {ETHTOOL_GLINK};
++ edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
++ if (copy_to_user(useraddr, &edata, sizeof(edata)))
++ return -EFAULT;
++ return 0;
++ }
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
++
++ switch (cmd) {
++ case SIOCDEVPRIVATE: {
++ struct ar2313_cmd scmd;
++
++ if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
++ return -EFAULT;
++
++#if DEBUG
++ printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
++ dev->name, scmd.cmd,
++ scmd.address, scmd.length,
++ scmd.mailbox, scmd.data[0], scmd.data[1]);
++#endif /* DEBUG */
++
++ switch (scmd.cmd) {
++ case AR2313_READ_DATA:
++ if(scmd.length==4){
++ scmd.data[0] = *((u32*)scmd.address);
++ } else if(scmd.length==2) {
++ scmd.data[0] = *((u16*)scmd.address);
++ } else if (scmd.length==1) {
++ scmd.data[0] = *((u8*)scmd.address);
++ } else {
++ return -EOPNOTSUPP;
++ }
++ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
++ return -EFAULT;
++ break;
++
++ case AR2313_WRITE_DATA:
++ if(scmd.length==4){
++ *((u32*)scmd.address) = scmd.data[0];
++ } else if(scmd.length==2) {
++ *((u16*)scmd.address) = scmd.data[0];
++ } else if (scmd.length==1) {
++ *((u8*)scmd.address) = scmd.data[0];
++ } else {
++ return -EOPNOTSUPP;
++ }
++ break;
++
++ case AR2313_GET_VERSION:
++ // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
++ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
++ return -EFAULT;
++ break;
++
++ default:
++ return -EOPNOTSUPP;
++ }
++ return 0;
++ }
++
++ case SIOCETHTOOL:
++ return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
++
++ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
++ data->phy_id = 1;
++ /* Fall Through */
++
++ case SIOCGMIIREG: /* Read MII PHY register. */
++ case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
++ data->val_out = armiiread(data->phy_id & 0x1f,
++ data->reg_num & 0x1f);
++ return 0;
++ case SIOCSMIIREG: /* Write MII PHY register. */
++ case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ armiiwrite(data->phy_id & 0x1f,
++ data->reg_num & 0x1f, data->val_in);
++ return 0;
++
++ case SIOCSIFHWADDR:
++ if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGIFHWADDR:
++ if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
++{
++ struct ar2313_private *sp = dev->priv;
++ return &sp->stats;
++}
++
++static short
++armiiread(short phy, short reg)
++{
++ volatile ETHERNET_STRUCT * ethernet;
++
++ ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
++ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
++ (phy << MII_ADDR_PHY_SHIFT));
++ while (ethernet->mii_addr & MII_ADDR_BUSY);
++ return (ethernet->mii_data >> MII_DATA_SHIFT);
++}
++
++static void
++armiiwrite(short phy, short reg, short data)
++{
++ volatile ETHERNET_STRUCT * ethernet;
++
++ ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
++ while (ethernet->mii_addr & MII_ADDR_BUSY);
++ ethernet->mii_data = data << MII_DATA_SHIFT;
++ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
++ (phy << MII_ADDR_PHY_SHIFT) |
++ MII_ADDR_WRITE);
++}
++
projects / openwrt.git / commitdiff