add support for the new broadcom driver to wificonf. wep is currently broken. will...
authornbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Mon, 14 Nov 2005 02:07:33 +0000 (02:07 +0000)
committernbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Mon, 14 Nov 2005 02:07:33 +0000 (02:07 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2480 3c298f89-4303-0410-b956-a3cf2f4a3e73

openwrt/package/wificonf/Makefile
openwrt/package/wificonf/include/proto/802.11.h [new file with mode: 0644]
openwrt/package/wificonf/include/proto/bcmeth.h [new file with mode: 0644]
openwrt/package/wificonf/include/proto/bcmevent.h [new file with mode: 0644]
openwrt/package/wificonf/include/proto/bcmip.h [new file with mode: 0644]
openwrt/package/wificonf/include/proto/ethernet.h [new file with mode: 0644]
openwrt/package/wificonf/include/proto/vlan.h [new file with mode: 0644]
openwrt/package/wificonf/include/proto/wpa.h [new file with mode: 0644]
openwrt/package/wificonf/include/wlioctl.h [new file with mode: 0644]
openwrt/package/wificonf/wificonf.c

index f027cd0..5f8c9a0 100644 (file)
@@ -19,7 +19,7 @@ $(PKG_BUILD_DIR)/.configured:
        touch $@
 
 $(PKG_BUILD_DIR)/.built:
-       $(TARGET_CC) $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -o $(PKG_BUILD_DIR)/wifi wificonf.c -L$(STAGING_DIR)/usr/lib -lnvram -lshared $(STAGING_DIR)/usr/lib/libiw.so
+       $(TARGET_CC) $(TARGET_CFLAGS) -Iinclude/ -I$(STAGING_DIR)/usr/include -o $(PKG_BUILD_DIR)/wifi wificonf.c -L$(STAGING_DIR)/usr/lib -lnvram -lshared $(STAGING_DIR)/usr/lib/libiw.so
        touch $@
 
 $(IPKG_WIFICONF):
diff --git a/openwrt/package/wificonf/include/proto/802.11.h b/openwrt/package/wificonf/include/proto/802.11.h
new file mode 100644 (file)
index 0000000..ac2b898
--- /dev/null
@@ -0,0 +1,930 @@
+/*
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * Fundamental types and constants relating to 802.11 
+ *
+ * $Id$
+ */
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+#include <proto/wpa.h>
+
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define        PACKED  __attribute__((packed))
+#else
+#pragma pack(1)
+#define        PACKED
+#endif
+
+#define DOT11_TU_TO_US                 1024    /* 802.11 Time Unit is 1024 microseconds */
+
+/* Generic 802.11 frame constants */
+#define DOT11_A3_HDR_LEN               24
+#define DOT11_A4_HDR_LEN               30
+#define DOT11_MAC_HDR_LEN              DOT11_A3_HDR_LEN
+#define DOT11_FCS_LEN                  4
+#define DOT11_ICV_LEN                  4
+#define DOT11_ICV_AES_LEN              8
+#define DOT11_QOS_LEN                  2
+
+#define DOT11_KEY_INDEX_SHIFT          6
+#define DOT11_IV_LEN                   4
+#define DOT11_IV_TKIP_LEN              8
+#define DOT11_IV_AES_OCB_LEN           4
+#define DOT11_IV_AES_CCM_LEN           8
+
+/* Includes MIC */
+#define DOT11_MAX_MPDU_BODY_LEN                2304
+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
+#define DOT11_MAX_MPDU_LEN             (DOT11_A4_HDR_LEN + \
+                                        DOT11_QOS_LEN + \
+                                        DOT11_IV_AES_CCM_LEN + \
+                                        DOT11_MAX_MPDU_BODY_LEN + \
+                                        DOT11_ICV_LEN + \
+                                        DOT11_FCS_LEN)
+
+#define DOT11_MAX_SSID_LEN             32
+
+/* dot11RTSThreshold */
+#define DOT11_DEFAULT_RTS_LEN          2347
+#define DOT11_MAX_RTS_LEN              2347
+
+/* dot11FragmentationThreshold */
+#define DOT11_MIN_FRAG_LEN             256
+#define DOT11_MAX_FRAG_LEN             2346    /* Max frag is also limited by aMPDUMaxLength of the attached PHY */
+#define DOT11_DEFAULT_FRAG_LEN         2346
+
+/* dot11BeaconPeriod */
+#define DOT11_MIN_BEACON_PERIOD                1
+#define DOT11_MAX_BEACON_PERIOD                0xFFFF
+
+/* dot11DTIMPeriod */
+#define DOT11_MIN_DTIM_PERIOD          1
+#define DOT11_MAX_DTIM_PERIOD          0xFF
+
+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
+#define DOT11_LLC_SNAP_HDR_LEN 8
+#define DOT11_OUI_LEN                  3
+struct dot11_llc_snap_header {
+       uint8   dsap;                           /* always 0xAA */
+       uint8   ssap;                           /* always 0xAA */
+       uint8   ctl;                            /* always 0x03 */
+       uint8   oui[DOT11_OUI_LEN];             /* RFC1042: 0x00 0x00 0x00
+                                                  Bridge-Tunnel: 0x00 0x00 0xF8 */
+       uint16  type;                           /* ethertype */
+} PACKED;
+
+/* RFC1042 header used by 802.11 per 802.1H */
+#define RFC1042_HDR_LEN                        (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
+
+/* Generic 802.11 MAC header */
+/*
+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
+ *              The fields are defined such that the shorter 1, 2, and 3
+ *              address headers just use the first k fields.
+ */
+struct dot11_header {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* duration/ID */
+       struct ether_addr       a1;             /* address 1 */
+       struct ether_addr       a2;             /* address 2 */
+       struct ether_addr       a3;             /* address 3 */
+       uint16                  seq;            /* sequence control */
+       struct ether_addr       a4;             /* address 4 */
+} PACKED;
+
+/* Control frames */
+
+struct dot11_rts_frame {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* duration/ID */
+       struct ether_addr       ra;             /* receiver address */
+       struct ether_addr       ta;             /* transmitter address */
+} PACKED;
+#define        DOT11_RTS_LEN           16
+
+struct dot11_cts_frame {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* duration/ID */
+       struct ether_addr       ra;             /* receiver address */
+} PACKED;
+#define        DOT11_CTS_LEN           10
+
+struct dot11_ack_frame {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* duration/ID */
+       struct ether_addr       ra;             /* receiver address */
+} PACKED;
+#define        DOT11_ACK_LEN           10
+
+struct dot11_ps_poll_frame {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* AID */
+       struct ether_addr       bssid;          /* receiver address, STA in AP */
+       struct ether_addr       ta;             /* transmitter address */
+} PACKED;
+#define        DOT11_PS_POLL_LEN       16
+
+struct dot11_cf_end_frame {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* duration/ID */
+       struct ether_addr       ra;             /* receiver address */
+       struct ether_addr       bssid;          /* transmitter address, STA in AP */
+} PACKED;
+#define        DOT11_CS_END_LEN        16
+
+/* Management frame header */
+struct dot11_management_header {
+       uint16                  fc;             /* frame control */
+       uint16                  durid;          /* duration/ID */
+       struct ether_addr       da;             /* receiver address */
+       struct ether_addr       sa;             /* transmitter address */
+       struct ether_addr       bssid;          /* BSS ID */
+       uint16                  seq;            /* sequence control */
+} PACKED;
+#define        DOT11_MGMT_HDR_LEN      24
+
+/* Management frame payloads */
+
+struct dot11_bcn_prb {
+       uint32                  timestamp[2];
+       uint16                  beacon_interval;
+       uint16                  capability;
+} PACKED;
+#define        DOT11_BCN_PRB_LEN       12
+
+struct dot11_auth {
+       uint16                  alg;            /* algorithm */
+       uint16                  seq;            /* sequence control */
+       uint16                  status;         /* status code */
+} PACKED;
+#define DOT11_AUTH_FIXED_LEN   6               /* length of auth frame without challenge info elt */
+
+struct dot11_assoc_req {
+       uint16                  capability;     /* capability information */
+       uint16                  listen;         /* listen interval */
+} PACKED;
+#define DOT11_ASSOC_REQ_FIXED_LEN      4       /* length of assoc frame without info elts */
+
+struct dot11_reassoc_req {
+       uint16                  capability;     /* capability information */
+       uint16                  listen;         /* listen interval */
+       struct ether_addr       ap;             /* Current AP address */
+} PACKED;
+#define DOT11_REASSOC_REQ_FIXED_LEN    10      /* length of assoc frame without info elts */
+
+struct dot11_assoc_resp {
+       uint16                  capability;     /* capability information */
+       uint16                  status;         /* status code */
+       uint16                  aid;            /* association ID */
+} PACKED;
+
+struct dot11_action_measure {
+       uint8   category;
+       uint8   action;
+       uint8   token;
+       uint8   data[1];
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN       3
+
+struct dot11_action_switch_channel {
+       uint8   category;
+       uint8   action;
+       uint8   data[5]; /* for switch IE */
+} PACKED;
+
+/**************
+  802.11h related definitions.
+**************/
+typedef struct {
+       uint8 id;
+       uint8 len;
+       uint8 power;
+} dot11_power_cnst_t;
+
+typedef struct {
+       uint8 min;
+       uint8 max;
+} dot11_power_cap_t;
+
+typedef struct {
+       uint8 id;
+       uint8 len;
+       uint8 tx_pwr;
+       uint8 margin;
+} dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN    2       /* length of IE data, not including 2 byte header */
+
+typedef struct {
+       uint8 id;
+       uint8 len;
+       uint8 first_channel;
+       uint8 num_channels;
+} dot11_supp_channels_t;
+
+/* csa mode type */
+#define DOT11_CSA_MODE_ADVISORY                0
+#define DOT11_CSA_MODE_NO_TX           1
+struct dot11_channel_switch {
+       uint8 id;
+       uint8 len;
+       uint8 mode;
+       uint8 channel;
+       uint8 count;
+}  PACKED;
+typedef struct dot11_channel_switch dot11_channel_switch_t;
+
+/* length of IE data, not including 2 byte header */
+#define DOT11_SWITCH_IE_LEN             3 
+
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC       0
+#define DOT11_MEASURE_TYPE_CCA                 1
+#define DOT11_MEASURE_TYPE_RPI         2
+
+/* Measurement Mode field */
+
+/* Measurement Request Modes */
+#define DOT11_MEASURE_MODE_ENABLE      (1<<1)
+#define DOT11_MEASURE_MODE_REQUEST     (1<<2)
+#define DOT11_MEASURE_MODE_REPORT      (1<<3)
+/* Measurement Report Modes */
+#define DOT11_MEASURE_MODE_LATE        (1<<0)
+#define DOT11_MEASURE_MODE_INCAPABLE   (1<<1)
+#define DOT11_MEASURE_MODE_REFUSED     (1<<2)
+/* Basic Measurement Map bits */
+#define DOT11_MEASURE_BASIC_MAP_BSS    ((uint8)(1<<0))
+#define DOT11_MEASURE_BASIC_MAP_OFDM   ((uint8)(1<<1))
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2))
+#define DOT11_MEASURE_BASIC_MAP_RADAR  ((uint8)(1<<3))
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4))
+
+typedef struct {
+       uint8 id;
+       uint8 len;
+       uint8 token;
+       uint8 mode;
+       uint8 type;
+       uint8 channel;
+       uint8 start_time[8];
+       uint16 duration;
+} dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14
+/* length of Measure Request IE data not including variable len */
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
+
+struct dot11_meas_rep {
+       uint8 id;
+       uint8 len;
+       uint8 token;
+       uint8 mode;
+       uint8 type;
+       union 
+       {
+               struct {
+                       uint8 channel;
+                       uint8 start_time[8];
+                       uint16 duration;
+                       uint8 map;
+               } PACKED basic;
+               uint8 data[1];
+       } PACKED rep;
+} PACKED;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+/* length of Measure Report IE data not including variable len */
+#define DOT11_MNG_IE_MREP_FIXED_LEN    3
+
+struct dot11_meas_rep_basic {
+       uint8 channel;
+       uint8 start_time[8];
+       uint16 duration;
+       uint8 map;
+} PACKED;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN    12
+
+struct dot11_quiet {
+       uint8 id;
+       uint8 len;
+       uint8 count;    /* TBTTs until beacon interval in quiet starts */
+       uint8 period;   /* Beacon intervals between periodic quiet periods ? */
+       uint16 duration;/* Length of quiet period, in TU's */
+       uint16 offset;  /* TU's offset from TBTT in Count field */
+} PACKED;
+typedef struct dot11_quiet dot11_quiet_t;
+
+typedef struct {
+       uint8 channel;
+       uint8 map;
+} chan_map_tuple_t;
+
+typedef struct {
+       uint8 id;
+       uint8 len;
+       uint8 eaddr[ETHER_ADDR_LEN];
+       uint8 interval;
+       chan_map_tuple_t map[1];
+} dot11_ibss_dfs_t;
+
+/* WME Elements */
+#define WME_OUI                        "\x00\x50\xf2"
+#define WME_VER                        1
+#define WME_TYPE               2
+#define WME_SUBTYPE_IE         0       /* Information Element */
+#define WME_SUBTYPE_PARAM_IE   1       /* Parameter Element */
+#define WME_SUBTYPE_TSPEC      2       /* Traffic Specification */
+
+/* WME Access Category Indices (ACIs) */
+#define AC_BE                  0       /* Best Effort */
+#define AC_BK                  1       /* Background */
+#define AC_VI                  2       /* Video */
+#define AC_VO                  3       /* Voice */
+#define AC_MAX                 4
+
+/* WME Information Element (IE) */
+struct wme_ie {
+       uint8 oui[3];
+       uint8 type;
+       uint8 subtype;
+       uint8 version;
+       uint8 acinfo;
+} PACKED;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7
+
+struct wme_acparam {
+       uint8   ACI;
+       uint8   ECW;
+       uint16  TXOP;           /* stored in network order (ls octet first) */
+} PACKED;
+typedef struct wme_acparam wme_acparam_t;
+
+/* WME Parameter Element (PE) */
+struct wme_params {
+       uint8 oui[3];
+       uint8 type;
+       uint8 subtype;
+       uint8 version;
+       uint8 acinfo;
+       uint8 rsvd;
+       wme_acparam_t acparam[4];
+} PACKED;
+typedef struct wme_params wme_params_t;
+#define WME_PARAMS_IE_LEN      24
+
+/* acinfo */
+#define WME_COUNT_MASK         0x0f
+/* ACI */
+#define WME_AIFS_MASK  0x0f
+#define WME_ACM_MASK   0x10
+#define WME_ACI_MASK   0x60
+#define WME_ACI_SHIFT  5
+/* ECW */
+#define WME_CWMIN_MASK 0x0f
+#define WME_CWMAX_MASK 0xf0
+#define WME_CWMAX_SHIFT        4
+
+#define WME_TXOP_UNITS 32
+
+/* AP: default params to be announced in the Beacon Frames/Probe Responses Table 12 WME Draft*/
+/* AP:  default params to be Used in the AP Side Table 14 WME Draft January 2004 802.11-03-504r5 */
+#define WME_AC_BK_ACI_STA       0x27
+#define WME_AC_BK_ECW_STA       0xA4
+#define WME_AC_BK_TXOP_STA      0x0000
+#define WME_AC_BE_ACI_STA       0x03
+#define WME_AC_BE_ECW_STA       0xA4
+#define WME_AC_BE_TXOP_STA      0x0000
+#define WME_AC_VI_ACI_STA       0x42
+#define WME_AC_VI_ECW_STA       0x43
+#define WME_AC_VI_TXOP_STA      0x005e
+#define WME_AC_VO_ACI_STA       0x62
+#define WME_AC_VO_ECW_STA       0x32
+#define WME_AC_VO_TXOP_STA      0x002f
+                                                                                                             
+#define WME_AC_BK_ACI_AP        0x27
+#define WME_AC_BK_ECW_AP        0xA4
+#define WME_AC_BK_TXOP_AP       0x0000
+#define WME_AC_BE_ACI_AP        0x03
+#define WME_AC_BE_ECW_AP        0x64
+#define WME_AC_BE_TXOP_AP       0x0000
+#define WME_AC_VI_ACI_AP        0x41
+#define WME_AC_VI_ECW_AP        0x43
+#define WME_AC_VI_TXOP_AP       0x005e
+#define WME_AC_VO_ACI_AP        0x61
+#define WME_AC_VO_ECW_AP        0x32
+#define WME_AC_VO_TXOP_AP       0x002f
+
+/* WME Traffic Specification (TSPEC) element */
+#define WME_SUBTYPE_TSPEC 2
+#define WME_TSPEC_HDR_LEN              2
+#define WME_TSPEC_BODY_OFF             2
+struct wme_tspec {
+       uint8 oui[DOT11_OUI_LEN];       /* WME_OUI */
+       uint8 type;                     /* WME_TYPE */
+       uint8 subtype;                  /* WME_SUBTYPE_TSPEC */
+       uint8 version;                  /* WME_VERSION */
+       uint16 ts_info;                 /* TS Info */
+       uint16 nom_msdu_size;           /* (Nominal or fixed) MSDU Size (bytes) */
+       uint16 max_msdu_size;           /* Maximum MSDU Size (bytes) */
+       uint32 min_service_interval;    /* Minimum Service Interval (us) */
+       uint32 max_service_interval;    /* Maximum Service Interval (us) */
+       uint32 inactivity_interval;     /* Inactivity Interval (us) */
+       uint32 service_start;           /* Service Start Time (us) */
+       uint32 min_rate;                /* Minimum Data Rate (bps) */
+       uint32 mean_rate;               /* Mean Data Rate (bps) */
+       uint32 max_burst_size;          /* Maximum Burst Size (bytes) */
+       uint32 min_phy_rate;            /* Minimum PHY Rate (bps) */
+       uint32 peak_rate;               /* Peak Data Rate (bps) */
+       uint32 delay_bound;             /* Delay Bound (us) */
+       uint16 surplus_bandwidth;       /* Surplus Bandwidth Allowance Factor */
+       uint16 medium_time;             /* Medium Time (32 us/s periods) */
+} PACKED;
+typedef struct wme_tspec wme_tspec_t;
+#define WME_TSPEC_LEN 56               /* not including 2-byte header */
+
+/* ts_info */
+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
+#define TS_INFO_PRIO_SHIFT_HI          11
+#define TS_INFO_PRIO_MASK_HI           (0x7 << TS_INFO_PRIO_SHIFT_HI)
+#define TS_INFO_PRIO_SHIFT_LO          1
+#define TS_INFO_PRIO_MASK_LO           (0x7 << TS_INFO_PRIO_SHIFT_LO)
+#define TS_INFO_CONTENTION_SHIFT       7
+#define TS_INFO_CONTENTION_MASK                (0x1 << TS_INFO_CONTENTION_SHIFT)
+#define TS_INFO_DIRECTION_SHIFT                5
+#define TS_INFO_DIRECTION_MASK         (0x3 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_UPLINK                 (0 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_DOWNLINK               (1 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_BIDIRECTIONAL          (3 << TS_INFO_DIRECTION_SHIFT)
+
+/* nom_msdu_size */
+#define FIXED_MSDU_SIZE 0x8000         /* MSDU size is fixed */
+#define MSDU_SIZE_MASK 0x7fff          /* (Nominal or fixed) MSDU size */
+
+/* surplus_bandwidth */
+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
+#define        INTEGER_SHIFT   13
+#define FRACTION_MASK  0x1FFF
+
+/* Management Notification Frame */
+struct dot11_management_notification {
+       uint8 category;                 /* DOT11_ACTION_NOTIFICATION */
+       uint8 action;
+       uint8 token;
+       uint8 status;
+       uint8 data[1];                  /* Elements */
+} PACKED;
+#define DOT11_MGMT_NOTIFICATION_LEN 4  /* Fixed length */
+
+/* WME Action Codes */
+#define WME_SETUP_REQUEST      0
+#define WME_SETUP_RESPONSE     1
+#define WME_TEARDOWN           2
+
+/* WME Setup Response Status Codes */
+#define WME_ADMISSION_ACCEPTED 0
+#define WME_INVALID_PARAMETERS 1
+#define WME_ADMISSION_REFUSED  3
+
+/* Macro to take a pointer to a beacon or probe response
+ * header and return the char* pointer to the SSID info element
+ */
+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
+
+/* Authentication frame payload constants */
+#define DOT11_OPEN_SYSTEM      0
+#define DOT11_SHARED_KEY       1
+#define DOT11_CHALLENGE_LEN    128
+
+/* Frame control macros */
+#define FC_PVER_MASK           0x3
+#define FC_PVER_SHIFT          0
+#define FC_TYPE_MASK           0xC
+#define FC_TYPE_SHIFT          2
+#define FC_SUBTYPE_MASK                0xF0
+#define FC_SUBTYPE_SHIFT       4
+#define FC_TODS                        0x100
+#define FC_TODS_SHIFT          8
+#define FC_FROMDS              0x200
+#define FC_FROMDS_SHIFT                9
+#define FC_MOREFRAG            0x400
+#define FC_MOREFRAG_SHIFT      10
+#define FC_RETRY               0x800
+#define FC_RETRY_SHIFT         11
+#define FC_PM                  0x1000
+#define FC_PM_SHIFT            12
+#define FC_MOREDATA            0x2000
+#define FC_MOREDATA_SHIFT      13
+#define FC_WEP                 0x4000
+#define FC_WEP_SHIFT           14
+#define FC_ORDER               0x8000
+#define FC_ORDER_SHIFT         15
+
+/* sequence control macros */
+#define SEQNUM_SHIFT           4
+#define FRAGNUM_MASK           0xF
+
+/* Frame Control type/subtype defs */
+
+/* FC Types */
+#define FC_TYPE_MNG            0
+#define FC_TYPE_CTL            1
+#define FC_TYPE_DATA           2
+
+/* Management Subtypes */
+#define FC_SUBTYPE_ASSOC_REQ           0
+#define FC_SUBTYPE_ASSOC_RESP          1
+#define FC_SUBTYPE_REASSOC_REQ         2
+#define FC_SUBTYPE_REASSOC_RESP                3
+#define FC_SUBTYPE_PROBE_REQ           4
+#define FC_SUBTYPE_PROBE_RESP          5
+#define FC_SUBTYPE_BEACON              8
+#define FC_SUBTYPE_ATIM                        9
+#define FC_SUBTYPE_DISASSOC            10
+#define FC_SUBTYPE_AUTH                        11
+#define FC_SUBTYPE_DEAUTH              12
+#define FC_SUBTYPE_ACTION              13
+
+/* Control Subtypes */
+#define FC_SUBTYPE_PS_POLL             10
+#define FC_SUBTYPE_RTS                 11
+#define FC_SUBTYPE_CTS                 12
+#define FC_SUBTYPE_ACK                 13
+#define FC_SUBTYPE_CF_END              14
+#define FC_SUBTYPE_CF_END_ACK          15
+
+/* Data Subtypes */
+#define FC_SUBTYPE_DATA                        0
+#define FC_SUBTYPE_DATA_CF_ACK         1
+#define FC_SUBTYPE_DATA_CF_POLL                2
+#define FC_SUBTYPE_DATA_CF_ACK_POLL    3
+#define FC_SUBTYPE_NULL                        4
+#define FC_SUBTYPE_CF_ACK              5
+#define FC_SUBTYPE_CF_POLL             6
+#define FC_SUBTYPE_CF_ACK_POLL         7
+#define FC_SUBTYPE_QOS_DATA            8
+#define FC_SUBTYPE_QOS_NULL            12
+
+/* type-subtype combos */
+#define FC_KIND_MASK           (FC_TYPE_MASK | FC_SUBTYPE_MASK)
+
+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
+
+#define FC_ASSOC_REQ   FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
+#define FC_ASSOC_RESP  FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
+#define FC_REASSOC_RESP        FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
+#define FC_PROBE_REQ   FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
+#define FC_PROBE_RESP  FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
+#define FC_BEACON      FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
+#define FC_DISASSOC    FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
+#define FC_AUTH                FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
+#define FC_DEAUTH      FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
+#define FC_ACTION      FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
+
+#define FC_PS_POLL     FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
+#define FC_RTS         FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
+#define FC_CTS         FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
+#define FC_ACK         FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
+#define FC_CF_END      FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
+#define FC_CF_END_ACK  FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
+
+#define FC_DATA                FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
+#define FC_NULL_DATA   FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
+#define FC_QOS_DATA    FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)
+#define FC_QOS_NULL    FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)
+
+/* QoS Control Field */
+
+/* 802.1D Tag */
+#define QOS_PRIO_SHIFT         0
+#define QOS_PRIO_MASK          0x0007
+#define QOS_PRIO(qos)          (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
+
+#define QOS_TID_SHIFT          0
+#define QOS_TID_MASK           0x000f
+#define QOS_TID(qos)           (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)
+
+/* Ack Policy (0 means Acknowledge) */
+#define QOS_ACK_SHIFT          5
+#define QOS_ACK_MASK           0x0060
+#define QOS_ACK(qos)           (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)
+
+/* Management Frames */
+
+/* Management Frame Constants */
+
+/* Fixed fields */
+#define DOT11_MNG_AUTH_ALGO_LEN                2
+#define DOT11_MNG_AUTH_SEQ_LEN         2
+#define DOT11_MNG_BEACON_INT_LEN       2
+#define DOT11_MNG_CAP_LEN              2
+#define DOT11_MNG_AP_ADDR_LEN          6
+#define DOT11_MNG_LISTEN_INT_LEN       2
+#define DOT11_MNG_REASON_LEN           2
+#define DOT11_MNG_AID_LEN              2
+#define DOT11_MNG_STATUS_LEN           2
+#define DOT11_MNG_TIMESTAMP_LEN                8
+
+/* DUR/ID field in assoc resp is 0xc000 | AID */
+#define DOT11_AID_MASK                 0x3fff
+
+/* Reason Codes */
+#define DOT11_RC_RESERVED                      0
+#define DOT11_RC_UNSPECIFIED                   1       /* Unspecified reason */
+#define DOT11_RC_AUTH_INVAL                    2       /* Previous authentication no longer valid */
+#define DOT11_RC_DEAUTH_LEAVING                        3       /* Deauthenticated because sending station is
+                                                          leaving (or has left) IBSS or ESS */
+#define DOT11_RC_INACTIVITY                    4       /* Disassociated due to inactivity */
+#define DOT11_RC_BUSY                          5       /* Disassociated because AP is unable to handle
+                                                          all currently associated stations */
+#define DOT11_RC_INVAL_CLASS_2                 6       /* Class 2 frame received from
+                                                          nonauthenticated station */
+#define DOT11_RC_INVAL_CLASS_3                 7       /* Class 3 frame received from
+                                                          nonassociated station */
+#define DOT11_RC_DISASSOC_LEAVING              8       /* Disassociated because sending station is
+                                                          leaving (or has left) BSS */
+#define DOT11_RC_NOT_AUTH                      9       /* Station requesting (re)association is
+                                                          not authenticated with responding station */
+#define DOT11_RC_MAX                           23      /* Reason codes > 23 are reserved */
+
+/* Status Codes */
+#define DOT11_STATUS_SUCCESS                   0       /* Successful */
+#define DOT11_STATUS_FAILURE                   1       /* Unspecified failure */
+#define DOT11_STATUS_CAP_MISMATCH              10      /* Cannot support all requested capabilities
+                                                          in the Capability Information field */
+#define DOT11_STATUS_REASSOC_FAIL              11      /* Reassociation denied due to inability to
+                                                          confirm that association exists */
+#define DOT11_STATUS_ASSOC_FAIL                        12      /* Association denied due to reason outside
+                                                          the scope of this standard */
+#define DOT11_STATUS_AUTH_MISMATCH             13      /* Responding station does not support the
+                                                          specified authentication algorithm */
+#define DOT11_STATUS_AUTH_SEQ                  14      /* Received an Authentication frame with
+                                                          authentication transaction sequence number
+                                                          out of expected sequence */
+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL       15      /* Authentication rejected because of challenge failure */
+#define DOT11_STATUS_AUTH_TIMEOUT              16      /* Authentication rejected due to timeout waiting
+                                                          for next frame in sequence */
+#define DOT11_STATUS_ASSOC_BUSY_FAIL           17      /* Association denied because AP is unable to
+                                                          handle additional associated stations */
+#define DOT11_STATUS_ASSOC_RATE_MISMATCH       18      /* Association denied due to requesting station
+                                                          not supporting all of the data rates in the
+                                                          BSSBasicRateSet parameter */
+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED      19      /* Association denied due to requesting station
+                                                          not supporting the Short Preamble option */
+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED       20      /* Association denied due to requesting station
+                                                          not supporting the PBCC Modulation option */
+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED    21      /* Association denied due to requesting station
+                                                          not supporting the Channel Agility option */
+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED   22      /* Association denied because Spectrum Management 
+                                                          capability is required. */
+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP       23      /* Association denied because the info in the 
+                                                          Power Cap element is unacceptable. */
+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS    24      /* Association denied because the info in the 
+                                                          Supported Channel element is unacceptable */
+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED  25      /* Association denied due to requesting station
+                                                          not supporting the Short Slot Time option */
+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED     26      /* Association denied due to requesting station
+                                                          not supporting the ER-PBCC Modulation option */
+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED    27      /* Association denied due to requesting station
+                                                          not supporting the DSS-OFDM option */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN                 1
+#define DOT11_MNG_IBSS_PARAM_LEN               2
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
+#define DOT11_MNG_TIM_FIXED_LEN                        3
+#define DOT11_MNG_TIM_DTIM_COUNT               0
+#define DOT11_MNG_TIM_DTIM_PERIOD              1
+#define DOT11_MNG_TIM_BITMAP_CTL               2
+#define DOT11_MNG_TIM_PVB                      3
+
+/* TLV defines */
+#define TLV_TAG_OFF            0
+#define TLV_LEN_OFF            1
+#define TLV_HDR_LEN            2
+#define TLV_BODY_OFF           2
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID                      0
+#define DOT11_MNG_RATES_ID                     1
+#define DOT11_MNG_FH_PARMS_ID                  2
+#define DOT11_MNG_DS_PARMS_ID                  3
+#define DOT11_MNG_CF_PARMS_ID                  4
+#define DOT11_MNG_TIM_ID                       5
+#define DOT11_MNG_IBSS_PARMS_ID                        6
+#define DOT11_MNG_COUNTRY_ID                   7
+#define DOT11_MNG_HOPPING_PARMS_ID             8
+#define DOT11_MNG_HOPPING_TABLE_ID             9
+#define DOT11_MNG_REQUEST_ID                   10
+#define DOT11_MNG_CHALLENGE_ID                 16
+#define DOT11_MNG_PWR_CONSTRAINT_ID            32    /* 11H PowerConstraint    */
+#define DOT11_MNG_PWR_CAP_ID                   33    /* 11H PowerCapability    */
+#define DOT11_MNG_TPC_REQUEST_ID               34    /* 11H TPC Request        */
+#define DOT11_MNG_TPC_REPORT_ID                        35    /* 11H TPC Report         */
+#define DOT11_MNG_SUPP_CHANNELS_ID             36    /* 11H Supported Channels */
+#define DOT11_MNG_CHANNEL_SWITCH_ID            37    /* 11H ChannelSwitch Announcement*/
+#define DOT11_MNG_MEASURE_REQUEST_ID           38    /* 11H MeasurementRequest */
+#define DOT11_MNG_MEASURE_REPORT_ID            39    /* 11H MeasurementReport  */
+#define DOT11_MNG_QUIET_ID                     40    /* 11H Quiet              */
+#define DOT11_MNG_IBSS_DFS_ID                  41    /* 11H IBSS_DFS           */
+#define DOT11_MNG_ERP_ID                       42
+#define DOT11_MNG_NONERP_ID                    47
+#ifdef BCMWPA2
+#define DOT11_MNG_RSN_ID                       48
+#endif /* BCMWPA2 */
+#define DOT11_MNG_EXT_RATES_ID                 50
+#define DOT11_MNG_WPA_ID                       221
+#define DOT11_MNG_PROPR_ID                     221
+
+/* ERP info element bit values */
+#define DOT11_MNG_ERP_LEN                      1       /* ERP is currently 1 byte long */
+#define DOT11_MNG_NONERP_PRESENT               0x01    /* NonERP (802.11b) STAs are present in the BSS */
+#define DOT11_MNG_USE_PROTECTION               0x02    /* Use protection mechanisms for ERP-OFDM frames */
+#define DOT11_MNG_BARKER_PREAMBLE              0x04    /* Short Preambles: 0 == allowed, 1 == not allowed */
+
+/* Capability Information Field */
+#define DOT11_CAP_ESS                          0x0001
+#define DOT11_CAP_IBSS                         0x0002
+#define DOT11_CAP_POLLABLE                     0x0004
+#define DOT11_CAP_POLL_RQ                      0x0008
+#define DOT11_CAP_PRIVACY                      0x0010
+#define DOT11_CAP_SHORT                                0x0020
+#define DOT11_CAP_PBCC                         0x0040
+#define DOT11_CAP_AGILITY                      0x0080
+#define DOT11_CAP_SPECTRUM                     0x0100
+#define DOT11_CAP_SHORTSLOT                    0x0400
+#define DOT11_CAP_CCK_OFDM                     0x2000
+
+/* Action Frame Constants */
+#define DOT11_ACTION_CAT_ERR_MASK      0x80
+#define DOT11_ACTION_CAT_SPECT_MNG     0x00
+#define DOT11_ACTION_NOTIFICATION      0x11    /* 17 */
+
+#define DOT11_ACTION_ID_M_REQ          0
+#define DOT11_ACTION_ID_M_REP          1
+#define DOT11_ACTION_ID_TPC_REQ                2
+#define DOT11_ACTION_ID_TPC_REP                3
+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4
+
+/* MLME Enumerations */
+#define DOT11_BSSTYPE_INFRASTRUCTURE           0
+#define DOT11_BSSTYPE_INDEPENDENT              1
+#define DOT11_BSSTYPE_ANY                      2
+#define DOT11_SCANTYPE_ACTIVE                  0
+#define DOT11_SCANTYPE_PASSIVE                 1
+
+/* 802.11 A PHY constants */
+#define APHY_SLOT_TIME         9
+#define APHY_SIFS_TIME         16
+#define APHY_DIFS_TIME         (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
+#define APHY_PREAMBLE_TIME     16
+#define APHY_SIGNAL_TIME       4
+#define APHY_SYMBOL_TIME       4
+#define APHY_SERVICE_NBITS     16
+#define APHY_TAIL_NBITS                6
+#define        APHY_CWMIN              15
+
+/* 802.11 B PHY constants */
+#define BPHY_SLOT_TIME         20
+#define BPHY_SIFS_TIME         10
+#define BPHY_DIFS_TIME         50
+#define BPHY_PLCP_TIME         192
+#define BPHY_PLCP_SHORT_TIME   96
+#define        BPHY_CWMIN              31
+
+/* 802.11 G constants */
+#define DOT11_OFDM_SIGNAL_EXTENSION    6
+
+#define PHY_CWMAX              1023
+
+#define        DOT11_MAXNUMFRAGS       16      /* max # fragments per MSDU */
+
+/* dot11Counters Table - 802.11 spec., Annex D */
+typedef struct d11cnt {
+       uint32          txfrag;         /* dot11TransmittedFragmentCount */
+       uint32          txmulti;        /* dot11MulticastTransmittedFrameCount */
+       uint32          txfail;         /* dot11FailedCount */
+       uint32          txretry;        /* dot11RetryCount */
+       uint32          txretrie;       /* dot11MultipleRetryCount */
+       uint32          rxdup;          /* dot11FrameduplicateCount */
+       uint32          txrts;          /* dot11RTSSuccessCount */
+       uint32          txnocts;        /* dot11RTSFailureCount */
+       uint32          txnoack;        /* dot11ACKFailureCount */
+       uint32          rxfrag;         /* dot11ReceivedFragmentCount */
+       uint32          rxmulti;        /* dot11MulticastReceivedFrameCount */
+       uint32          rxcrc;          /* dot11FCSErrorCount */
+       uint32          txfrmsnt;       /* dot11TransmittedFrameCount */
+       uint32          rxundec;        /* dot11WEPUndecryptableCount */
+} d11cnt_t;
+
+/* BRCM OUI */
+#define BRCM_OUI               "\x00\x10\x18"
+
+/* BRCM info element */
+struct brcm_ie {
+       uchar   id;             /* 221, DOT11_MNG_PROPR_ID */
+       uchar   len;   
+       uchar   oui[3];
+       uchar   ver;
+       uchar   assoc;          /*  # of assoc STAs */
+       uchar   flags;          /* misc flags */
+} PACKED;
+#define BRCM_IE_LEN            8
+typedef        struct brcm_ie brcm_ie_t;
+#define BRCM_IE_VER            2
+#define BRCM_IE_LEGACY_AES_VER 1
+
+/* brcm_ie flags */
+#define        BRF_ABCAP               0x1     /* afterburner capable */
+#define        BRF_ABRQRD              0x2     /* afterburner requested */
+#define        BRF_LZWDS               0x4     /* lazy wds enabled */
+#define BRF_ABCOUNTER_MASK     0xf0  /* afterburner wds "state" counter */
+#define BRF_ABCOUNTER_SHIFT    4
+
+#define AB_WDS_TIMEOUT_MAX     15              /* afterburner wds Max count indicating not locally capable */
+#define AB_WDS_TIMEOUT_MIN     1               /* afterburner wds, use zero count as indicating "downrev" */
+
+
+/* OUI for BRCM proprietary IE */
+#define BRCM_PROP_OUI          "\x00\x90\x4C"
+
+/* Vendor IE structure */
+struct vndr_ie {
+       uchar id;
+       uchar len;
+       uchar oui [3];
+       uchar data [1];         /* Variable size data */
+}PACKED;
+typedef struct vndr_ie vndr_ie_t;
+
+#define VNDR_IE_HDR_LEN                2       /* id + len field */
+#define VNDR_IE_MIN_LEN                3       /* size of the oui field */
+#define VNDR_IE_MAX_LEN                256
+
+/* WPA definitions */
+#define WPA_VERSION            1
+#define WPA_OUI                        "\x00\x50\xF2"
+
+#ifdef BCMWPA2
+#define WPA2_VERSION           1
+#define WPA2_VERSION_LEN       2
+#define WPA2_OUI               "\x00\x0F\xAC"
+#endif /* BCMWPA2 */
+
+#define WPA_OUI_LEN    3
+
+/* RSN authenticated key managment suite */
+#define RSN_AKM_NONE           0       /* None (IBSS) */
+#define RSN_AKM_UNSPECIFIED    1       /* Over 802.1x */
+#define RSN_AKM_PSK            2       /* Pre-shared Key */
+
+
+/* Key related defines */
+#define DOT11_MAX_DEFAULT_KEYS 4       /* number of default keys */
+#define DOT11_MAX_KEY_SIZE     32      /* max size of any key */
+#define DOT11_MAX_IV_SIZE      16      /* max size of any IV */
+#define DOT11_EXT_IV_FLAG      (1<<5)  /* flag to indicate IV is > 4 bytes */
+
+#define WEP1_KEY_SIZE          5       /* max size of any WEP key */
+#define WEP1_KEY_HEX_SIZE      10      /* size of WEP key in hex. */
+#define WEP128_KEY_SIZE                13      /* max size of any WEP key */
+#define WEP128_KEY_HEX_SIZE    26      /* size of WEP key in hex. */
+#define TKIP_MIC_SIZE          8       /* size of TKIP MIC */
+#define TKIP_EOM_SIZE          7       /* max size of TKIP EOM */
+#define TKIP_EOM_FLAG          0x5a    /* TKIP EOM flag byte */
+#define TKIP_KEY_SIZE          32      /* size of any TKIP key */
+#define TKIP_MIC_AUTH_TX       16      /* offset to Authenticator MIC TX key */
+#define TKIP_MIC_AUTH_RX       24      /* offset to Authenticator MIC RX key */
+#define TKIP_MIC_SUP_RX                16      /* offset to Supplicant MIC RX key */
+#define TKIP_MIC_SUP_TX                24      /* offset to Supplicant MIC TX key */
+#define AES_KEY_SIZE           16      /* size of AES key */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11_H_ */
diff --git a/openwrt/package/wificonf/include/proto/bcmeth.h b/openwrt/package/wificonf/include/proto/bcmeth.h
new file mode 100644 (file)
index 0000000..7a97fe8
--- /dev/null
@@ -0,0 +1,103 @@
+/*
+ * Broadcom Ethernettype  protocol definitions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Broadcom Ethernet protocol defines 
+ *
+ */
+
+#ifndef _BCMETH_H_
+#define _BCMETH_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define        PACKED  __attribute__((packed))
+#else
+#pragma pack(1)
+#define        PACKED
+#endif
+
+/* ETHER_TYPE_BRCM is defined in ethernet.h */
+
+/*
+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
+ * in one of two formats: (only subtypes 32768-65535 are in use now)
+ *
+ * subtypes 0-32767:
+ *     8 bit subtype (0-127)
+ *     8 bit length in bytes (0-255)
+ *
+ * subtypes 32768-65535:
+ *     16 bit big-endian subtype
+ *     16 bit big-endian length in bytes (0-65535)
+ *
+ * length is the number of additional bytes beyond the 4 or 6 byte header
+ *
+ * Reserved values:
+ * 0 reserved
+ * 5-15 reserved for iLine protocol assignments
+ * 17-126 reserved, assignable
+ * 127 reserved
+ * 32768 reserved
+ * 32769-65534 reserved, assignable
+ * 65535 reserved
+ */
+
+/* 
+ * While adding the subtypes and their specific processing code make sure 
+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition 
+ */
+
+#define        BCMILCP_SUBTYPE_RATE            1
+#define        BCMILCP_SUBTYPE_LINK            2
+#define        BCMILCP_SUBTYPE_CSA             3
+#define        BCMILCP_SUBTYPE_LARQ            4
+#define BCMILCP_SUBTYPE_VENDOR         5
+#define        BCMILCP_SUBTYPE_FLH             17
+
+#define BCMILCP_SUBTYPE_VENDOR_LONG    32769
+#define BCMILCP_SUBTYPE_CERT           32770
+#define BCMILCP_SUBTYPE_SES            32771
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED   0
+#define BCMILCP_BCM_SUBTYPE_EVENT              1
+#define BCMILCP_BCM_SUBTYPE_SES                        2
+/*
+The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
+within BCMILCP_BCM_SUBTYPE_EVENT type messages
+*/
+/*#define BCMILCP_BCM_SUBTYPE_EAPOL            3*/
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH       8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION         0
+
+/* These fields are stored in network order */
+typedef  struct bcmeth_hdr
+{
+       uint16  subtype; /* Vendor specific..32769*/
+       uint16  length; 
+       uint8   version; /* Version is 0*/
+       uint8   oui[3]; /* Broadcom OUI*/
+       /* user specific Data */
+       uint16  usr_subtype;
+} PACKED bcmeth_hdr_t;
+
+
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif
diff --git a/openwrt/package/wificonf/include/proto/bcmevent.h b/openwrt/package/wificonf/include/proto/bcmevent.h
new file mode 100644 (file)
index 0000000..3d93f44
--- /dev/null
@@ -0,0 +1,147 @@
+/*
+ * Broadcom Event  protocol definitions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *
+ * Dependencies: proto/bcmeth.h
+ *
+ */
+
+/*
+ * Broadcom Ethernet Events protocol defines 
+ *
+ */
+
+#ifndef _BCMEVENT_H_
+#define _BCMEVENT_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define        PACKED  __attribute__((packed))
+#else
+#pragma pack(1)
+#define        PACKED
+#endif
+
+
+
+#define BCM_EVENT_MSG_VERSION  1
+#define BCM_MSG_IFNAME_MAX             16
+
+
+/* flags */
+#define WLC_EVENT_MSG_LINK             0x01
+#define WLC_EVENT_MSG_FLUSHTXQ 0x02
+#define WLC_EVENT_MSG_GROUP            0x04
+
+
+
+/* theses fields are stored in network order */
+typedef struct  
+{
+       uint16  version;
+       uint16  flags;                  /* see flags below */
+       uint32  event_type;             /* Message (see below) */
+       uint32  status;                 /* Status code (see below) */
+       uint32  reason;                 /* Reason code (if applicable) */
+       uint32  auth_type;              /* WLC_E_AUTH */
+       uint32  datalen;                /* data buf */
+       struct ether_addr       addr;   /* Station address (if applicable) */
+       char    ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface*/
+} PACKED wl_event_msg_t;
+
+/* used by driver msgs */
+typedef struct bcm_event {
+       struct ether_header eth;
+       bcmeth_hdr_t            bcm_hdr; 
+       wl_event_msg_t          event;
+       /* data portion follows */
+} PACKED bcm_event_t;
+
+#define BCM_MSG_LEN    (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
+
+
+
+/* Event messages */
+#define WLC_E_SET_SSID                 0       /* indicates status of set SSID */
+#define WLC_E_JOIN                     1       /* differentiates join IBSS from found (WLC_E_START) IBSS */
+#define WLC_E_START                    2       /* STA founded an IBSS or AP started a BSS */
+#define WLC_E_AUTH                     3       /* 802.11 AUTH request */
+#define WLC_E_AUTH_IND                 4       /* 802.11 AUTH indication */
+#define WLC_E_DEAUTH                   5       /* 802.11 DEAUTH request */
+#define WLC_E_DEAUTH_IND               6       /* 802.11 DEAUTH indication */
+#define WLC_E_ASSOC                    7       /* 802.11 ASSOC request */
+#define WLC_E_ASSOC_IND                        8       /* 802.11 ASSOC indication */
+#define WLC_E_REASSOC                  9       /* 802.11 REASSOC request */
+#define WLC_E_REASSOC_IND              10      /* 802.11 REASSOC indication */
+#define WLC_E_DISASSOC                 11      /* 802.11 DISASSOC request */
+#define WLC_E_DISASSOC_IND             12      /* 802.11 DISASSOC indication */
+#define WLC_E_QUIET_START              13      /* 802.11h Quiet period started */
+#define WLC_E_QUIET_END                        14      /* 802.11h Quiet period ended */
+#define WLC_E_GOT_BEACONS              15      /* internal use: IBSS mode: saw another STA's BEACONS */
+#define WLC_E_LINK                     16      /* generic link indication */
+#define WLC_E_MIC_ERROR                        17      /* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK                        18      /* NDIS style link indication */
+#define WLC_E_ROAM                     19      /* roam attempt occurred: indicate status & reason for roam */
+#define WLC_E_TXFAIL                   20      /* change in dot11FailedCount (txfail) */
+#define WLC_E_PMKID_CACHE              21      /* WPA2 pmkid cache indication */
+#define WLC_E_RETROGRADE_TSF           22      /* current AP's TSF value went backward */
+#define WLC_E_PRUNE                            23      /* AP was pruned from join list for reason */
+#define WLC_E_AUTOAUTH                 24      /* report AutoAuth table entry match for join attempt */
+#define WLC_E_EAPOL_MSG                        25      /* Event encapsulating an EAPOL message */
+#define WLC_E_LAST                     26
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS           0
+#define WLC_E_STATUS_FAIL              1
+#define WLC_E_STATUS_TIMEOUT           2
+#define WLC_E_STATUS_NO_NETWORKS       3
+#define WLC_E_STATUS_ABORT             4
+#define WLC_E_STATUS_NO_ACK            5
+#define WLC_E_STATUS_UNSOLICITED       6
+#define WLC_E_STATUS_ATTEMPT           7
+
+/* roam reason codes */
+#define WLC_E_REASON_LOW_RSSI                  1
+#define WLC_E_REASON_DEAUTH                            2
+#define WLC_E_REASON_DISASSOC                  3
+#define WLC_E_REASON_BCNS_LOST                 4
+#define WLC_E_REASON_FAST_ROAM_FAILED  5
+
+/* prune reason codes */
+#define WLC_E_PRUNE_ENCR_MISMATCH              1       /* ecryption mismatch */
+#define WLC_E_PRUNE_BCAST_BSSID                        2       /* AP uses a broadcast BSSID */
+#define WLC_E_PRUNE_MAC_DENY                   3       /* STA's MAC addr is in AP's MAC deny list */
+#define WLC_E_PRUNE_MAC_NA                     4       /* STA's MAC addr is not in AP's MAC allow list */
+#define WLC_E_PRUNE_REG_PASSV                  5       /* AP not allowed due to regulatory restriction */
+#define WLC_E_PRUNE_SPCT_MGMT                  6       /* AP does not support STA locale spectrum mgmt */
+#define WLC_E_PRUNE_RADAR                      7       /* AP is on a radar channel of STA locale */
+#define WLC_E_RSN_MISMATCH                     8       /* STA does not support AP's RSN */
+#define WLC_E_PRUNE_NO_COMMON_RATES            9       /* No rates in common with AP */
+#define WLC_E_PRUNE_BASIC_RATES                        10      /* STA does not support all basic rates of BSS */
+#define WLC_E_PRUNE_CCXFAST_PREVAP             11      /* CCX FAST ROAM: prune previous AP */
+#define WLC_E_PRUNE_CIPHER_NA                  12      /* BSS's cipher not supported */
+#define WLC_E_PRUNE_KNOWN_STA                  13      /* AP is already known to us as a STA */
+
+/* WLC_SET_CALLBACK data type */
+typedef struct wlc_event_cb {
+       void (*fn)(void *, bcm_event_t *);      /* Callback function */
+       void *context;                          /* Passed to callback function */
+} wlc_event_cb_t;
+
+
+
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif
diff --git a/openwrt/package/wificonf/include/proto/bcmip.h b/openwrt/package/wificonf/include/proto/bcmip.h
new file mode 100644 (file)
index 0000000..da2d8f8
--- /dev/null
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.                      
+ *                                           
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;         
+ * the contents of this file may not be disclosed to third parties, copied      
+ * or duplicated in any form, in whole or in part, without the prior            
+ * written permission of Broadcom Corporation.                                  
+ *
+ * Fundamental constants relating to IP Protocol
+ *
+ * $Id$
+ */
+
+#ifndef _bcmip_h_
+#define _bcmip_h_
+
+/* IP header */
+#define IPV4_VERIHL_OFFSET     0       /* version and ihl byte offset */
+#define IPV4_TOS_OFFSET                1       /* TOS offset */
+#define IPV4_PROT_OFFSET       9       /* protocol type offset */
+#define IPV4_CHKSUM_OFFSET     10      /* IP header checksum offset */
+#define IPV4_SRC_IP_OFFSET     12      /* src IP addr offset */
+#define IPV4_DEST_IP_OFFSET    16      /* dest IP addr offset */
+
+#define IPV4_VER_MASK  0xf0
+#define IPV4_IHL_MASK  0x0f
+
+#define IPV4_PROT_UDP  17      /* UDP protocol type */
+
+#define IPV4_ADDR_LEN  4       /* IP v4 address length */
+
+#define IPV4_VER_NUM   0x40    /* IP v4 version number */
+
+/* NULL IP address check */
+#define IPV4_ISNULLADDR(a)     ((((uint8 *)(a))[0] + ((uint8 *)(a))[1] + \
+                               ((uint8 *)(a))[2] + ((uint8 *)(a))[3]) == 0)
+
+#define IPV4_ADDR_STR_LEN      16
+
+#endif /* #ifndef _bcmip_h_ */
+
diff --git a/openwrt/package/wificonf/include/proto/ethernet.h b/openwrt/package/wificonf/include/proto/ethernet.h
new file mode 100644 (file)
index 0000000..c2718a6
--- /dev/null
@@ -0,0 +1,171 @@
+/*******************************************************************************
+ * $Id$
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ ******************************************************************************/
+
+#ifndef ETHER_ADDR_LEN
+#define _NET_ETHERNET_H_
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define        PACKED  __attribute__((packed))
+#else
+#pragma pack(1)
+#define        PACKED
+#endif
+
+/*
+ * The number of bytes in an ethernet (MAC) address.
+ */
+#define        ETHER_ADDR_LEN          6
+
+/*
+ * The number of bytes in the type field.
+ */
+#define        ETHER_TYPE_LEN          2
+
+/*
+ * The number of bytes in the trailing CRC field.
+ */
+#define        ETHER_CRC_LEN           4
+
+/*
+ * The length of the combined header.
+ */
+#define        ETHER_HDR_LEN           (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
+
+/*
+ * The minimum packet length.
+ */
+#define        ETHER_MIN_LEN           64
+
+/*
+ * The minimum packet user data length.
+ */
+#define        ETHER_MIN_DATA          46
+
+/*
+ * The maximum packet length.
+ */
+#define        ETHER_MAX_LEN           1518
+
+/*
+ * The maximum packet user data length.
+ */
+#define        ETHER_MAX_DATA          1500
+
+/* ether types */
+#define        ETHER_TYPE_IP           0x0800          /* IP */
+#define ETHER_TYPE_ARP         0x0806          /* ARP */
+#define ETHER_TYPE_8021Q       0x8100          /* 802.1Q */
+#define        ETHER_TYPE_BRCM         0x886c          /* Broadcom Corp. */
+#define        ETHER_TYPE_802_1X       0x888e          /* 802.1x */
+#ifdef BCMWPA2
+#define        ETHER_TYPE_802_1X_PREAUTH       0x88c7  /* 802.1x preauthentication*/
+#endif
+
+/* Broadcom subtype follows ethertype;  First 2 bytes are reserved; Next 2 are subtype; */
+#define        ETHER_BRCM_SUBTYPE_LEN  4               /* Broadcom 4 byte subtype */
+#define        ETHER_BRCM_CRAM         0x1             /* Broadcom subtype cram protocol */
+
+/* ether header */
+#define ETHER_DEST_OFFSET      0               /* dest address offset */
+#define ETHER_SRC_OFFSET       6               /* src address offset */
+#define ETHER_TYPE_OFFSET      12              /* ether type offset */
+
+/*
+ * A macro to validate a length with
+ */
+#define        ETHER_IS_VALID_LEN(foo) \
+       ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
+/*
+ * Structure of a 10Mb/s Ethernet header.
+ */
+struct ether_header {
+       uint8   ether_dhost[ETHER_ADDR_LEN];
+       uint8   ether_shost[ETHER_ADDR_LEN];
+       uint16  ether_type;
+} PACKED;
+
+/*
+ * Structure of a 48-bit Ethernet address.
+ */
+struct ether_addr {
+       uint8 octet[ETHER_ADDR_LEN];
+} PACKED;
+#endif
+
+/*
+ * Takes a pointer, sets locally admininistered 
+ * address bit in the 48-bit Ethernet address.
+ */
+#define ETHER_SET_LOCALADDR(ea) ( ((uint8 *)(ea))[0] = \
+                               (((uint8 *)(ea))[0] | 2) )
+
+/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
+
+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
+#define        ether_cmp(a, b) ( \
+       !(((short*)a)[0] == ((short*)b)[0]) | \
+       !(((short*)a)[1] == ((short*)b)[1]) | \
+       !(((short*)a)[2] == ((short*)b)[2]))
+
+/* copy an ethernet address - assumes the pointers can be referenced as shorts */
+#define        ether_copy(s, d) { \
+       ((short*)d)[0] = ((short*)s)[0]; \
+       ((short*)d)[1] = ((short*)s)[1]; \
+       ((short*)d)[2] = ((short*)s)[2]; }
+
+/*
+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
+ */
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &               \
+                           ((uint8 *)(ea))[1] &                \
+                           ((uint8 *)(ea))[2] &                \
+                           ((uint8 *)(ea))[3] &                \
+                           ((uint8 *)(ea))[4] &                \
+                           ((uint8 *)(ea))[5]) == 0xff)
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+
+/*
+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
+ */
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |            \
+                           ((uint8 *)(ea))[1] |                \
+                           ((uint8 *)(ea))[2] |                \
+                           ((uint8 *)(ea))[3] |                \
+                           ((uint8 *)(ea))[4] |                \
+                           ((uint8 *)(ea))[5]) == 0)
+
+/* Differentiated Services Codepoint - upper 6 bits of tos in iphdr */
+#define        DSCP_MASK               0xFC            /* upper 6 bits */
+#define        DSCP_SHIFT              2
+#define        DSCP_WME_PRI_MASK       0xE0            /* upper 3 bits */
+#define        DSCP_WME_PRI_SHIFT      5
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _NET_ETHERNET_H_ */
diff --git a/openwrt/package/wificonf/include/proto/vlan.h b/openwrt/package/wificonf/include/proto/vlan.h
new file mode 100644 (file)
index 0000000..ba136e9
--- /dev/null
@@ -0,0 +1,50 @@
+/*
+ * 802.1Q VLAN protocol definitions
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _vlan_h_
+#define _vlan_h_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define        PACKED  __attribute__((packed))
+#else
+#pragma pack(1)
+#define        PACKED
+#endif
+
+#define VLAN_VID_MASK          0xfff   /* low 12 bits are vlan id */
+#define        VLAN_CFI_SHIFT          12      /* canonical format indicator bit */
+#define VLAN_PRI_SHIFT         13      /* user priority */
+
+#define VLAN_PRI_MASK          7       /* 3 bits of priority */
+
+#define        VLAN_TAG_LEN            4
+#define        VLAN_TAG_OFFSET         (2 * ETHER_ADDR_LEN)
+
+struct ethervlan_header {
+       uint8   ether_dhost[ETHER_ADDR_LEN];
+       uint8   ether_shost[ETHER_ADDR_LEN];
+       uint16  vlan_type;              /* 0x8100 */
+       uint16  vlan_tag;               /* priority, cfi and vid */
+       uint16  ether_type;
+};
+
+#define        ETHERVLAN_HDR_LEN       (ETHER_HDR_LEN + VLAN_TAG_LEN)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _vlan_h_ */
diff --git a/openwrt/package/wificonf/include/proto/wpa.h b/openwrt/package/wificonf/include/proto/wpa.h
new file mode 100644 (file)
index 0000000..db49b76
--- /dev/null
@@ -0,0 +1,140 @@
+/*
+ * Fundamental types and constants relating to WPA
+ *
+ * Copyright 2005, Broadcom Corporation      
+ * All Rights Reserved.      
+ *       
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY      
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM      
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS      
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.      
+ *
+ * $Id$
+ */
+
+#ifndef _proto_wpa_h_
+#define _proto_wpa_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define        PACKED  __attribute__((packed))
+#else
+#pragma pack(1)
+#define        PACKED
+#endif
+
+/* Reason Codes */
+
+/* 10 and 11 are from TGh. */
+#define DOT11_RC_BAD_PC                                10      /* Unacceptable power capability element */
+#define DOT11_RC_BAD_CHANNELS                  11      /* Unacceptable supported channels element */
+/* 12 is unused */
+/* 13 through 23 taken from P802.11i/D3.0, November 2002 */
+#define DOT11_RC_INVALID_WPA_IE                        13      /* Invalid info. element */
+#define DOT11_RC_MIC_FAILURE                   14      /* Michael failure */
+#define DOT11_RC_4WH_TIMEOUT                   15      /* 4-way handshake timeout */
+#define DOT11_RC_GTK_UPDATE_TIMEOUT            16      /* Group key update timeout */
+#define DOT11_RC_WPA_IE_MISMATCH               17      /* WPA IE in 4-way handshake differs from (re-)assoc. request/probe response */
+#define DOT11_RC_INVALID_MC_CIPHER             18      /* Invalid multicast cipher */
+#define DOT11_RC_INVALID_UC_CIPHER             19      /* Invalid unicast cipher */
+#define DOT11_RC_INVALID_AKMP                  20      /* Invalid authenticated key management protocol */
+#define DOT11_RC_BAD_WPA_VERSION               21      /* Unsupported WPA version */
+#define DOT11_RC_INVALID_WPA_CAP               22      /* Invalid WPA IE capabilities */
+#define DOT11_RC_8021X_AUTH_FAIL               23      /* 802.1X authentication failure */
+
+#define WPA2_PMKID_LEN 16
+
+/* WPA IE fixed portion */
+typedef struct
+{
+       uint8 tag;      /* TAG */
+       uint8 length;   /* TAG length */
+       uint8 oui[3];   /* IE OUI */
+       uint8 oui_type; /* OUI type */
+       struct {
+               uint8 low;
+               uint8 high;
+       } PACKED version;       /* IE version */
+} PACKED wpa_ie_fixed_t;
+#define WPA_IE_OUITYPE_LEN     4
+#define WPA_IE_FIXED_LEN       8
+#define WPA_IE_TAG_FIXED_LEN   6
+
+typedef struct {
+       uint8 tag;      /* TAG */
+       uint8 length;   /* TAG length */
+       struct {
+               uint8 low;
+               uint8 high;
+       } PACKED version;       /* IE version */
+} PACKED wpa_rsn_ie_fixed_t;
+#define WPA_RSN_IE_FIXED_LEN   4
+#define WPA_RSN_IE_TAG_FIXED_LEN       2
+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
+
+/* WPA suite/multicast suite */
+typedef struct
+{
+       uint8 oui[3];
+       uint8 type;
+} PACKED wpa_suite_t, wpa_suite_mcast_t;
+#define WPA_SUITE_LEN  4
+
+/* WPA unicast suite list/key management suite list */
+typedef struct
+{
+       struct {
+               uint8 low;
+               uint8 high;
+       } PACKED count;
+       wpa_suite_t list[1];
+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
+#define WPA_IE_SUITE_COUNT_LEN 2
+typedef struct
+{
+       struct {
+               uint8 low;
+               uint8 high;
+       } PACKED count;
+       wpa_pmkid_t list[1];
+} PACKED wpa_pmkid_list_t;
+
+/* WPA cipher suites */
+#define WPA_CIPHER_NONE                0       /* None */
+#define WPA_CIPHER_WEP_40      1       /* WEP (40-bit) */
+#define WPA_CIPHER_TKIP                2       /* TKIP: default for WPA */
+#define WPA_CIPHER_AES_OCB     3       /* AES (OCB) */
+#define WPA_CIPHER_AES_CCM     4       /* AES (CCM) */
+#define WPA_CIPHER_WEP_104     5       /* WEP (104-bit) */
+
+#define IS_WPA_CIPHER(cipher)  ((cipher) == WPA_CIPHER_NONE || \
+                                (cipher) == WPA_CIPHER_WEP_40 || \
+                                (cipher) == WPA_CIPHER_WEP_104 || \
+                                (cipher) == WPA_CIPHER_TKIP || \
+                                (cipher) == WPA_CIPHER_AES_OCB || \
+                                (cipher) == WPA_CIPHER_AES_CCM)
+
+/* WPA TKIP countermeasures parameters */
+#define WPA_TKIP_CM_DETECT     60      /* multiple MIC failure window (seconds) */
+#define WPA_TKIP_CM_BLOCK      60      /* countermeasures active window (seconds) */
+
+/* WPA capabilities defined in 802.11i */
+#define WPA_CAP_4_REPLAY_CNTRS         2
+#define WPA_CAP_16_REPLAY_CNTRS                3
+#define WPA_CAP_REPLAY_CNTR_SHIFT      2
+#define WPA_CAP_REPLAY_CNTR_MASK       0x000c
+
+/* WPA Specific defines */
+#define WPA_CAP_LEN    2
+
+#define        WPA_CAP_WPA2_PREAUTH            1
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _proto_wpa_h_ */
diff --git a/openwrt/package/wificonf/include/wlioctl.h b/openwrt/package/wificonf/include/wlioctl.h
new file mode 100644 (file)
index 0000000..43b4e02
--- /dev/null
@@ -0,0 +1,1238 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * All Rights Reserved.
+ * 
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _wlioctl_h_
+#define        _wlioctl_h_
+
+#include "typedefs.h"
+#include "proto/wpa.h"
+#include "proto/ethernet.h"
+#include "proto/bcmeth.h"
+#include "proto/bcmevent.h"
+#include "proto/802.11.h"
+
+/* require default structure packing */
+#if !defined(__GNUC__)
+#pragma pack(push,8)
+#endif
+
+#define WL_NUMRATES            255     /* max # of rates in a rateset */
+
+typedef struct wl_rateset {
+       uint32  count;                  /* # rates in this set */
+       uint8   rates[WL_NUMRATES];     /* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+#define WL_CHANSPEC_CHAN_MASK  0x0fff
+#define WL_CHANSPEC_BAND_MASK  0xf000
+#define WL_CHANSPEC_BAND_SHIFT 12
+#define WL_CHANSPEC_BAND_A     0x1000
+#define WL_CHANSPEC_BAND_B     0x2000
+
+/*
+ * Per-bss information structure.
+ */
+
+#define        WL_BSS_INFO_VERSION             107     /* current version of wl_bss_info struct */
+
+typedef struct wl_bss_info {
+       uint32          version;        /* version field */
+       uint32          length;         /* byte length of data in this record, starting at version and including IEs */
+       struct ether_addr BSSID;
+       uint16          beacon_period;  /* units are Kusec */
+       uint16          capability;     /* Capability information */
+       uint8           SSID_len;
+       uint8           SSID[32];
+       struct {
+               uint    count;          /* # rates in this set */
+               uint8   rates[16];      /* rates in 500kbps units w/hi bit set if basic */
+       } rateset;                      /* supported rates */
+       uint8           channel;        /* Channel no. */
+       uint16          atim_window;    /* units are Kusec */
+       uint8           dtim_period;    /* DTIM period */
+       int16           RSSI;           /* receive signal strength (in dBm) */
+       int8            phy_noise;      /* noise (in dBm) */
+       uint32          ie_length;      /* byte length of Information Elements */
+       /* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+       uint32          SSID_len;
+       uchar           SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+       wlc_ssid_t ssid;        /* default is {0, ""} */
+       struct ether_addr bssid;/* default is bcast */
+       int8 bss_type;          /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
+       int8 scan_type;         /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
+       int32 nprobes;          /* -1 use default, number of probes per channel */
+       int32 active_time;      /* -1 use default, dwell time per channel for active scanning */
+       int32 passive_time;     /* -1 use default, dwell time per channel for passive scanning */
+       int32 home_time;        /* -1 use default, dwell time for the home channel between channel scans */
+       int32 channel_num;      /* 0 use default (all available channels), count of channels in channel_list */
+       uint16 channel_list[1]; /* list of chanspecs */
+} wl_scan_params_t;
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+typedef struct wl_scan_results {
+       uint32 buflen;
+       uint32 version;
+       uint32 count;
+       wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+/* uint32 list */
+typedef struct wl_uint32_list {
+       /* in - # of elements, out - # of entries */
+       uint32 count;
+       /* variable length uint32 list */
+       uint32 element[1];
+} wl_uint32_list_t;
+
+#define WLC_CNTRY_BUF_SZ       4               /* Country string is 3 bytes + NULL */
+
+typedef struct wl_channels_in_country {
+       uint32 buflen;
+       uint32 band;
+       char country_abbrev[WLC_CNTRY_BUF_SZ];
+       uint32 count;
+       uint32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+       uint32 buflen;
+       uint32 band_set;
+       uint32 band;
+       uint32 count;
+       char country_abbrev[1];
+} wl_country_list_t;
+
+#define WL_RM_TYPE_BASIC       1
+#define WL_RM_TYPE_CCA         2
+#define WL_RM_TYPE_RPI         3
+
+#define WL_RM_FLAG_PARALLEL    (1<<0)
+
+#define WL_RM_FLAG_LATE                (1<<1)
+#define WL_RM_FLAG_INCAPABLE   (1<<2)
+#define WL_RM_FLAG_REFUSED     (1<<3)
+
+typedef struct wl_rm_req_elt {
+       int8    type;
+       int8    flags;
+       uint16  chanspec;
+       uint32  token;          /* token for this measurement */
+       uint32  tsf_h;          /* TSF high 32-bits of Measurement start time */
+       uint32  tsf_l;          /* TSF low 32-bits */
+       uint32  dur;            /* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+       uint32  token;          /* overall measurement set token */
+       uint32  count;          /* number of measurement reqests */
+       wl_rm_req_elt_t req[1]; /* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN    8
+
+typedef struct wl_rm_rep_elt {
+       int8    type;
+       int8    flags;
+       uint16  chanspec;
+       uint32  token;          /* token for this measurement */
+       uint32  tsf_h;          /* TSF high 32-bits of Measurement start time */
+       uint32  tsf_l;          /* TSF low 32-bits */
+       uint32  dur;            /* TUs */
+       uint32  len;            /* byte length of data block */
+       uint8   data[1];        /* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN        24      /* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+       uint8   rpi[WL_RPI_REP_BIN_NUM];
+       int8    rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+       uint32  token;          /* overall measurement set token */
+       uint32  len;            /* length of measurement report block */
+       wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN    8
+
+
+#define WLC_MAX_KEY_SIZE       32      /* max size of any key */
+#define WLC_MAX_IV_SIZE                16      /* max size of any IV */
+#define WLC_EXT_IV_FLAG                (1<<5)  /* flag to indicate IV is > 4 bytes */
+#define WLC_MAX_DEFAULT_KEYS   4       /* # of default WEP keys */
+#define WLC_MAX_KEYS           54      /* Max # of WEP keys */
+#define WLC_WEP1_KEY_SIZE      5       /* max size of any WEP key */
+#define WLC_WEP1_KEY_HEX_SIZE  10      /* size of WEP key in hex. */
+#define WLC_WEP128_KEY_SIZE    13      /* max size of any WEP key */
+#define WLC_WEP128_KEY_HEX_SIZE        26      /* size of WEP key in hex. */
+#define WLC_TKIP_MIC_SIZE      8       /* size of TKIP MIC */
+#define WLC_TKIP_EOM_SIZE      7       /* max size of TKIP EOM */
+#define WLC_TKIP_EOM_FLAG      0x5a    /* TKIP EOM flag byte */
+#define WLC_TKIP_KEY_SIZE      32      /* size of any TKIP key */
+#define WLC_TKIP_MIC_AUTH_TX   16      /* offset to Authenticator MIC TX key */
+#define WLC_TKIP_MIC_AUTH_RX   24      /* offset to Authenticator MIC RX key */
+#define WLC_TKIP_MIC_SUP_RX    16      /* offset to Supplicant MIC RX key */
+#define WLC_TKIP_MIC_SUP_TX    24      /* offset to Supplicant MIC TX key */
+#define WLC_TKIP_P1_KEY_SIZE   10      /* size of TKHash Phase1 output, in bytes */
+#define WLC_TKIP_P2_KEY_SIZE   16      /* size of TKHash Phase2 output */
+#define WLC_AES_KEY_SIZE       16      /* size of AES key */
+
+
+typedef enum sup_auth_status {
+       WLC_SUP_DISCONNECTED = 0,
+       WLC_SUP_CONNECTING,
+       WLC_SUP_IDREQUIRED,
+       WLC_SUP_AUTHENTICATING,
+       WLC_SUP_AUTHENTICATED,
+       WLC_SUP_KEYXCHANGE,
+       WLC_SUP_KEYED,
+       WLC_SUP_TIMEOUT
+} sup_auth_status_t;
+
+
+/* Enumerate crypto algorithms */
+#define        CRYPTO_ALGO_OFF                 0
+#define        CRYPTO_ALGO_WEP1                1
+#define        CRYPTO_ALGO_TKIP                2
+#define        CRYPTO_ALGO_WEP128              3
+#define CRYPTO_ALGO_AES_CCM            4
+#define CRYPTO_ALGO_AES_OCB_MSDU       5
+#define CRYPTO_ALGO_AES_OCB_MPDU       6
+#define CRYPTO_ALGO_NALG               7
+
+#define WSEC_GEN_MIC_ERROR     0x0001
+#define WSEC_GEN_REPLAY                0x0002
+
+#define WL_SOFT_KEY    (1 << 0)        /* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY (1 << 1)        /* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4    (1 << 4)        /* Reserved for backward compat */
+#define WL_KF_RES_5    (1 << 5)        /* Reserved for backward compat */
+
+
+typedef struct wlc_tkip_info {
+       uint16          phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)];    /* tkhash phase1 result */
+       uint8           phase2[WLC_TKIP_P2_KEY_SIZE];   /* tkhash phase2 result */
+       uint32          micl;
+       uint32          micr;
+} tkip_info_t;
+
+typedef struct _wsec_iv {
+       uint32          hi;     /* upper 32 bits of IV */
+       uint16          lo;     /* lower 16 bits of IV */
+} wsec_iv_t;
+
+typedef struct wsec_key {
+       uint32          index;          /* key index */
+       uint32          len;            /* key length */
+       uint8           data[WLC_MAX_KEY_SIZE]; /* key data */
+       tkip_info_t     tkip_tx;        /* tkip transmit state */
+       tkip_info_t     tkip_rx;        /* tkip receive state */
+       uint32          algo;           /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+       uint32          flags;          /* misc flags */
+       uint32          algo_hw;        /* cache for hw register*/
+       uint32          aes_mode;       /* cache for hw register*/
+       int             iv_len;         /* IV length */         
+       int             iv_initialized; /* has IV been initialized already? */          
+       int             icv_len;        /* ICV length */
+       wsec_iv_t       rxiv;           /* Rx IV */
+       wsec_iv_t       txiv;           /* Tx IV */
+       struct ether_addr ea;           /* per station */
+} wsec_key_t;
+
+
+
+typedef struct wl_wsec_key {
+       uint32          index;          /* key index */
+       uint32          len;            /* key length */
+       uint8           data[DOT11_MAX_KEY_SIZE];       /* key data */
+       uint32          pad_1[18];
+       uint32          algo;           /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+       uint32          flags;          /* misc flags */
+       uint32          pad_2[2];
+       int             pad_3;
+       int             iv_initialized; /* has IV been initialized already? */
+       int             pad_4;
+       /* Rx IV */
+       struct {
+               uint32  hi;             /* upper 32 bits of IV */
+               uint16  lo;             /* lower 16 bits of IV */
+       } rxiv;
+       uint32          pad_5[2];
+       struct ether_addr ea;           /* per station */
+} wl_wsec_key_t;
+
+
+#define WSEC_MIN_PSK_LEN       8
+#define WSEC_MAX_PSK_LEN       64
+
+/* Flag for key material needing passhash'ing */
+#define WSEC_PASSPHRASE                (1<<0)
+
+/* recepticle for WLC_SET_WSEC_PMK parameter */
+typedef struct {
+       ushort  key_len;                /* octets in key material */
+       ushort  flags;                  /* key handling qualification */
+       uint8   key[WSEC_MAX_PSK_LEN];  /* PMK material */
+} wsec_pmk_t;
+
+/* wireless security bitvec */
+#define WEP_ENABLED            0x0001
+#define TKIP_ENABLED           0x0002
+#define AES_ENABLED            0x0004
+#define WSEC_SWFLAG            0x0008
+#define SES_OW_ENABLED         0x0040  /* to go into transition mode without setting wep */
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED      0x0000  /* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_NONE          0x0001  /* none (IBSS) */
+#define WPA_AUTH_UNSPECIFIED   0x0002  /* over 802.1x */
+#define WPA_AUTH_PSK           0x0004  /* Pre-shared key */
+/*#define WPA_AUTH_8021X 0x0020*/      /* 802.1x, reserved */
+
+#define WPA2_AUTH_UNSPECIFIED  0x0040  /* over 802.1x */
+#define WPA2_AUTH_PSK          0x0080  /* Pre-shared key */
+
+
+
+/* pmkid */
+#define        MAXPMKID                16      
+
+typedef struct _pmkid
+{
+       struct ether_addr       BSSID;
+       uint8                   PMKID[WPA2_PMKID_LEN];
+} pmkid_t;
+
+typedef struct _pmkid_list
+{
+       uint32  npmkid;
+       pmkid_t pmkid[1];
+} pmkid_list_t;
+
+typedef struct _pmkid_cand {
+       struct ether_addr       BSSID;
+       uint8                   preauth;
+} pmkid_cand_t;
+
+typedef struct _pmkid_cand_list {
+       uint32  npmkid_cand;
+       pmkid_cand_t    pmkid_cand[1];
+} pmkid_cand_list_t;
+
+
+typedef struct wl_led_info {
+       uint32          index;          /* led index */
+       uint32          behavior;
+       bool            activehi;
+} wl_led_info_t;
+
+typedef struct wlc_assoc_info {
+       uint32          req_len;
+       uint32          resp_len;
+       uint32          flags;
+       struct dot11_assoc_req req;
+       struct ether_addr reassoc_bssid; /* used in reassoc's */
+       struct dot11_assoc_resp resp;
+} wl_assoc_info_t;
+/* flags */
+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
+/* srom read/write struct passed through ioctl */
+typedef struct {
+       uint    byteoff;                /* byte offset */
+       uint    nbytes;         /* number of bytes */
+       uint16 buf[1];
+} srom_rw_t;
+
+/* R_REG and W_REG struct passed through ioctl */
+typedef struct {
+       uint32  byteoff;        /* byte offset of the field in d11regs_t */
+       uint32  val;            /* read/write value of the field */
+       uint32  size;           /* sizeof the field */
+       uint    band;           /* band (optional) */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls */
+typedef struct {
+       uint16  auto_ctrl;      /* 1: Automatic control, 0: overriden */
+       uint16  bb;             /* Baseband attenuation */
+       uint16  radio;          /* Radio attenuation */
+       uint16  txctl1;         /* Radio TX_CTL1 value */
+} atten_t;
+
+/* Used to get specific STA parameters */
+typedef struct {
+       uint32  val;
+       struct ether_addr ea;
+} scb_val_t;
+
+
+/* Event data type */
+typedef struct wlc_event {
+       wl_event_msg_t event; /* encapsulated event */  
+       struct ether_addr *addr; /* used to keep a trace of the potential present of
+                                                       an address in wlc_event_msg_t */
+       void *data;                     /* used to hang additional data on an event */
+       struct wlc_event *next; /* enables ordered list of pending events */
+} wlc_event_t;
+
+#define BCM_MAC_STATUS_INDICATION           (0x40010200L)
+
+typedef struct {
+       uint16          ver;            /* version of this struct */
+       uint16          len;            /* length in bytes of this structure */
+       uint16          cap;            /* sta's advertized capabilities */
+       uint32          flags;          /* flags defined below */
+       uint32          idle;           /* time since data pkt rx'd from sta */
+       struct ether_addr       ea;     /* Station address */
+       wl_rateset_t    rateset;        /* rateset in use */
+       uint32          in;             /* seconds elapsed since associated */
+       uint32          listen_interval_inms; /* Min Listen interval in ms for this STA*/
+} sta_info_t;
+
+#define WL_STA_VER     2
+
+/* flags fields */
+#define WL_STA_BRCM    0x01
+#define WL_STA_WME     0x02
+#define WL_STA_ABCAP   0x04
+#define WL_STA_AUTHE   0x08
+#define WL_STA_ASSOC   0x10
+#define WL_STA_AUTHO   0x20
+#define WL_STA_WDS     0x40
+#define WL_WDS_LINKUP  0x80
+
+/*
+ * Country locale determines which channels are available to us.
+ */
+typedef enum _wlc_locale {
+       WLC_WW = 0,     /* Worldwide */
+       WLC_THA,        /* Thailand */
+       WLC_ISR,        /* Israel */
+       WLC_JDN,        /* Jordan */
+       WLC_PRC,        /* China */
+       WLC_JPN,        /* Japan */
+       WLC_FCC,        /* USA */
+       WLC_EUR,        /* Europe */
+       WLC_USL,        /* US Low Band only */
+       WLC_JPH,        /* Japan High Band only */
+       WLC_ALL,        /* All the channels in this band */
+       WLC_11D,        /* Represents locale recieved by 11d beacons */
+       WLC_LAST_LOCALE,
+       WLC_UNDEFINED_LOCALE = 0xf
+} wlc_locale_t;
+
+/* channel encoding */
+typedef struct channel_info {
+       int hw_channel;
+       int target_channel;
+       int scan_channel;
+} channel_info_t;
+
+/* For ioctls that take a list of MAC addresses */
+struct maclist {
+       uint count;                     /* number of MAC addresses */
+       struct ether_addr ea[1];        /* variable length array of MAC addresses */
+};
+
+/* get pkt count struct passed through ioctl */
+typedef struct get_pktcnt {
+       uint rx_good_pkt;
+       uint rx_bad_pkt;
+       uint tx_good_pkt;
+       uint tx_bad_pkt;
+} get_pktcnt_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+       uint cmd;       /* common ioctl definition */
+       void *buf;      /* pointer to user buffer */
+       uint len;       /* length of user buffer */
+       bool set;       /* get or set request (optional) */
+       uint used;      /* bytes read or written (optional) */
+       uint needed;    /* bytes needed (optional) */
+} wl_ioctl_t;
+
+/*
+ * Structure for passing hardware and software
+ * revision info up from the driver.
+ */
+typedef struct wlc_rev_info {
+       uint            vendorid;       /* PCI vendor id */
+       uint            deviceid;       /* device id of chip */
+       uint            radiorev;       /* radio revision */
+       uint            chiprev;        /* chip revision */
+       uint            corerev;        /* core revision */
+       uint            boardid;        /* board identifier (usu. PCI sub-device id) */
+       uint            boardvendor;    /* board vendor (usu. PCI sub-vendor id) */
+       uint            boardrev;       /* board revision */
+       uint            driverrev;      /* driver version */
+       uint            ucoderev;       /* microcode version */
+       uint            bus;            /* bus type */
+       uint            chipnum;        /* chip number */
+} wlc_rev_info_t;
+
+#define WL_BRAND_MAX 10
+typedef struct wl_instance_info {
+       uint instance;
+       char brand[WL_BRAND_MAX];
+} wl_instance_info_t;
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC                0x14e46c77
+
+/* bump this number if you change the ioctl interface */
+#define WLC_IOCTL_VERSION      1
+
+#define        WLC_IOCTL_MAXLEN        8192            /* max length ioctl buffer required */
+#define        WLC_IOCTL_SMLEN         256             /* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC                          0
+#define WLC_GET_VERSION                                1
+#define WLC_UP                                         2
+#define WLC_DOWN                                       3
+#define WLC_DUMP                                       6
+#define WLC_GET_MSGLEVEL                       7
+#define WLC_SET_MSGLEVEL                       8
+#define WLC_GET_PROMISC                                9
+#define WLC_SET_PROMISC                                10
+#define WLC_GET_RATE                           12
+/* #define WLC_SET_RATE                                13 */ /* no longer supported */
+#define WLC_GET_INSTANCE                       14
+#define WLC_GET_FRAG                           15 /* no longer supported in the new driver */
+#define WLC_SET_FRAG                           16 /* no longer supported in the new driver */
+#define WLC_GET_RTS                            17 /* no longer supported in the new driver */
+#define WLC_SET_RTS                            18 /* no longer supported in the new driver */
+#define WLC_GET_INFRA                          19
+#define WLC_SET_INFRA                          20
+#define WLC_GET_AUTH                           21
+#define WLC_SET_AUTH                           22
+#define WLC_GET_BSSID                          23
+#define WLC_SET_BSSID                          24
+#define WLC_GET_SSID                           25
+#define WLC_SET_SSID                           26
+#define WLC_RESTART                            27
+#define WLC_DUMP_SCB                           28 
+#define WLC_GET_CHANNEL                                29
+#define WLC_SET_CHANNEL                                30
+#define WLC_GET_SRL                            31
+#define WLC_SET_SRL                            32
+#define WLC_GET_LRL                            33
+#define WLC_SET_LRL                            34
+#define WLC_GET_PLCPHDR                                35
+#define WLC_SET_PLCPHDR                                36
+#define WLC_GET_RADIO                          37
+#define WLC_SET_RADIO                          38
+#define WLC_GET_PHYTYPE                                39
+#define WLC_DUMP_RATE                          40
+#define WLC_SET_RATE_PARAMS                    41
+#define WLC_GET_WEP                            42
+#define WLC_SET_WEP                            43
+#define WLC_GET_KEY                            44
+#define WLC_SET_KEY                            45
+#define WLC_GET_REGULATORY                     46
+#define WLC_SET_REGULATORY                     47
+#define WLC_GET_PASSIVE                                48
+#define WLC_SET_PASSIVE                                49
+#define WLC_SCAN                               50
+#define WLC_SCAN_RESULTS                       51
+#define WLC_DISASSOC                           52
+#define WLC_REASSOC                            53
+#define WLC_GET_ROAM_TRIGGER                   54
+#define WLC_SET_ROAM_TRIGGER                   55
+#define WLC_GET_ROAM_DELTA                     56
+#define WLC_SET_ROAM_DELTA                     57
+#define WLC_GET_ROAM_SCAN_PERIOD               58
+#define WLC_SET_ROAM_SCAN_PERIOD               59
+#define WLC_EVM                                        60
+#define WLC_GET_TXANT                          61
+#define WLC_SET_TXANT                          62
+#define WLC_GET_ANTDIV                         63
+#define WLC_SET_ANTDIV                         64
+#define WLC_GET_TXPWR                          65
+#define WLC_SET_TXPWR                          66
+#define WLC_GET_CLOSED                         67
+#define WLC_SET_CLOSED                         68
+#define WLC_GET_MACLIST                                69
+#define WLC_SET_MACLIST                                70
+#define WLC_GET_RATESET                                71
+#define WLC_SET_RATESET                                72
+#define WLC_GET_LOCALE                         73
+// #define WLC_SET_LOCALE                              74
+#define WLC_GET_BCNPRD                         75
+#define WLC_SET_BCNPRD                         76
+#define WLC_GET_DTIMPRD                                77
+#define WLC_SET_DTIMPRD                                78
+#define WLC_GET_SROM                           79
+#define WLC_SET_SROM                           80
+#define WLC_GET_WEP_RESTRICT                   81
+#define WLC_SET_WEP_RESTRICT                   82
+#define WLC_GET_COUNTRY                                83
+#define WLC_SET_COUNTRY                                84
+#define WLC_GET_PM                             85
+#define WLC_SET_PM                             86
+#define WLC_GET_WAKE                           87
+#define WLC_SET_WAKE                           88
+#define        WLC_GET_D11CNTS                         89
+#define WLC_GET_FORCELINK                      90      /* ndis only */
+#define WLC_SET_FORCELINK                      91      /* ndis only */
+#define WLC_FREQ_ACCURACY                      92
+#define WLC_CARRIER_SUPPRESS                   93
+#define WLC_GET_PHYREG                         94
+#define WLC_SET_PHYREG                         95
+#define WLC_GET_RADIOREG                       96
+#define WLC_SET_RADIOREG                       97
+#define WLC_GET_REVINFO                                98
+#define WLC_GET_UCANTDIV                       99
+#define WLC_SET_UCANTDIV                       100
+#define WLC_R_REG                              101
+#define WLC_W_REG                              102
+#define WLC_DIAG_LOOPBACK                      103
+#define WLC_RESET_D11CNTS                      104
+#define WLC_GET_MACMODE                                105
+#define WLC_SET_MACMODE                                106
+#define WLC_GET_MONITOR                                107
+#define WLC_SET_MONITOR                                108
+#define WLC_GET_GMODE                          109
+#define WLC_SET_GMODE                          110
+#define WLC_GET_LEGACY_ERP                     111
+#define WLC_SET_LEGACY_ERP                     112
+#define WLC_GET_RX_ANT                         113
+#define WLC_GET_CURR_RATESET                   114     /* current rateset */
+#define WLC_GET_SCANSUPPRESS                   115
+#define WLC_SET_SCANSUPPRESS                   116
+#define WLC_GET_AP                             117
+#define WLC_SET_AP                             118
+#define WLC_GET_EAP_RESTRICT                   119
+#define WLC_SET_EAP_RESTRICT                   120
+#define WLC_SCB_AUTHORIZE                      121
+#define WLC_SCB_DEAUTHORIZE                    122
+#define WLC_GET_WDSLIST                                123
+#define WLC_SET_WDSLIST                                124
+#define WLC_GET_ATIM                           125
+#define WLC_SET_ATIM                           126
+#define WLC_GET_RSSI                           127
+#define WLC_GET_PHYANTDIV                      128
+#define WLC_SET_PHYANTDIV                      129
+#define WLC_AP_RX_ONLY                         130
+#define WLC_GET_TX_PATH_PWR                    131
+#define WLC_SET_TX_PATH_PWR                    132
+#define WLC_GET_WSEC                           133
+#define WLC_SET_WSEC                           134
+#define WLC_GET_PHY_NOISE                      135
+#define WLC_GET_BSS_INFO                       136
+#define WLC_GET_PKTCNTS                                137
+#define WLC_GET_LAZYWDS                                138
+#define WLC_SET_LAZYWDS                                139
+#define WLC_GET_BANDLIST                       140
+#define WLC_GET_BAND                           141
+#define WLC_SET_BAND                           142
+#define WLC_SCB_DEAUTHENTICATE                 143
+#define WLC_GET_SHORTSLOT                      144
+#define WLC_GET_SHORTSLOT_OVERRIDE             145
+#define WLC_SET_SHORTSLOT_OVERRIDE             146
+#define WLC_GET_SHORTSLOT_RESTRICT             147
+#define WLC_SET_SHORTSLOT_RESTRICT             148
+#define WLC_GET_GMODE_PROTECTION               149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE      150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE      151
+#define WLC_UPGRADE                            152
+#define WLC_GET_MRATE                          153
+#define WLC_SET_MRATE                          154
+#define WLC_GET_IGNORE_BCNS                    155
+#define WLC_SET_IGNORE_BCNS                    156
+#define WLC_GET_SCB_TIMEOUT                    157
+#define WLC_SET_SCB_TIMEOUT                    158
+#define WLC_GET_ASSOCLIST                      159
+#define WLC_GET_CLK                            160
+#define WLC_SET_CLK                            161
+#define WLC_GET_UP                             162
+#define WLC_OUT                                        163
+#define WLC_GET_WPA_AUTH                       164
+#define WLC_SET_WPA_AUTH                       165
+#define WLC_GET_UCFLAGS                                166
+#define WLC_SET_UCFLAGS                                167
+#define WLC_GET_PWRIDX                         168
+#define WLC_SET_PWRIDX                         169
+#define WLC_GET_TSSI                           170
+#define WLC_GET_SUP_RATESET_OVERRIDE           171
+#define WLC_SET_SUP_RATESET_OVERRIDE           172
+#define WLC_SET_FAST_TIMER                     173
+#define WLC_GET_FAST_TIMER                     174
+#define WLC_SET_SLOW_TIMER                     175
+#define WLC_GET_SLOW_TIMER                     176
+#define WLC_DUMP_PHYREGS                       177
+#define WLC_GET_GMODE_PROTECTION_CONTROL       178
+#define WLC_SET_GMODE_PROTECTION_CONTROL       179
+#define WLC_GET_PHYLIST                                180
+#define WLC_ENCRYPT_STRENGTH                   181     /* ndis only */
+#define WLC_DECRYPT_STATUS                     182     /* ndis only */
+#define WLC_GET_KEY_SEQ                                183
+#define WLC_GET_SCAN_CHANNEL_TIME              184
+#define WLC_SET_SCAN_CHANNEL_TIME              185
+#define WLC_GET_SCAN_UNASSOC_TIME              186
+#define WLC_SET_SCAN_UNASSOC_TIME              187
+#define WLC_GET_SCAN_HOME_TIME                 188
+#define WLC_SET_SCAN_HOME_TIME                 189
+#define WLC_GET_SCAN_PASSES                    190
+#define WLC_SET_SCAN_PASSES                    191
+#define WLC_GET_PRB_RESP_TIMEOUT               192
+#define WLC_SET_PRB_RESP_TIMEOUT               193
+#define WLC_GET_ATTEN                          194
+#define WLC_SET_ATTEN                          195
+#define WLC_GET_SHMEM                          196     /* diag */
+#define WLC_SET_SHMEM                          197     /* diag */
+#define WLC_GET_GMODE_PROTECTION_CTS           198
+#define WLC_SET_GMODE_PROTECTION_CTS           199
+#define WLC_SET_TKIP_MIC_FLAG                  200
+#define WLC_SCB_DEAUTHENTICATE_FOR_REASON      201
+#define WLC_TKIP_COUNTERMEASURES               202
+#define WLC_GET_PIOMODE                                203
+#define WLC_SET_PIOMODE                                204
+#define WLC_SET_LED                            209
+#define WLC_GET_LED                            210
+#define WLC_GET_INTERFERENCE_MODE              211
+#define WLC_SET_INTERFERENCE_MODE              212
+#define WLC_GET_CHANNEL_QA                     213
+#define WLC_START_CHANNEL_QA                   214
+#define WLC_GET_CHANNEL_SEL                    215
+#define WLC_START_CHANNEL_SEL                  216
+#define WLC_GET_VALID_CHANNELS                 217
+#define WLC_GET_FAKEFRAG                       218
+#define WLC_SET_FAKEFRAG                       219
+#define WLC_GET_PWROUT_PERCENTAGE              220
+#define WLC_SET_PWROUT_PERCENTAGE              221
+#define WLC_SET_BAD_FRAME_PREEMPT              222
+#define WLC_GET_BAD_FRAME_PREEMPT              223
+#define WLC_SET_LEAP_LIST                      224
+#define WLC_GET_LEAP_LIST                      225
+#define WLC_GET_CWMIN                          226
+#define WLC_SET_CWMIN                          227
+#define WLC_GET_CWMAX                          228
+#define WLC_SET_CWMAX                          229
+#define WLC_GET_WET                            230
+#define WLC_SET_WET                            231
+#define WLC_GET_KEY_PRIMARY                    235
+#define WLC_SET_KEY_PRIMARY                    236
+#define WLC_SCAN_WITH_CALLBACK                 240
+#define WLC_GET_RADAR                          242
+#define WLC_SET_RADAR                          243
+#define WLC_SET_SPECT_MANAGMENT                        244
+#define WLC_GET_SPECT_MANAGMENT                        245
+#define WLC_WDS_GET_REMOTE_HWADDR              246     /* currently handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER                  248
+#define WLC_GET_CS_SCAN_TIMER                  249
+#define WLC_SEND_PWR_CONSTRAINT                        254
+#define WLC_CURRENT_PWR                                256
+#define WLC_GET_CHANNELS_IN_COUNTRY            260
+#define WLC_GET_COUNTRY_LIST                   261
+#define WLC_GET_VAR                            262     /* get value of named variable */
+#define WLC_SET_VAR                            263     /* set named variable to value */
+#define WLC_NVRAM_GET                          264
+#define WLC_NVRAM_SET                          265
+#define WLC_SET_WSEC_PMK                       268
+#define WLC_GET_AUTH_MODE                      269
+#define WLC_SET_AUTH_MODE                      270
+#define WLC_NDCONFIG_ITEM                      273     /* currently handled in wl_oid.c */
+#define WLC_NVOTPW                                     274
+/* #define WLC_OTPW                                    275 */ /* no longer supported */
+#define WLC_SET_LOCALE                         278
+#define WLC_LAST                               279     /* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+ * Duplicate a few definitions that irelay requires from epiioctl.h here
+ * so caller doesn't have to include this file and epiioctl.h .
+ * If this grows any more, it would be time to move these irelay-specific
+ * definitions out of the epiioctl.h and into a separate driver common file.
+ */
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE         0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE            0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE     (WL_OID_BASE + WLC_GET_INSTANCE)
+#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
+
+#define WL_DECRYPT_STATUS_SUCCESS      1
+#define WL_DECRYPT_STATUS_FAILURE      2
+#define WL_DECRYPT_STATUS_UNKNOWN      3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS                    0
+#define WLC_UPGRADE_PENDING                    1
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE            (1<<0)
+#define WL_RADIO_HW_DISABLE            (1<<1)
+#define WL_RADIO_MPC_DISABLE           (1<<2)
+#define WL_RADIO_COUNTRY_DISABLE       (1<<3)  /* some countries don't support any 802.11 channel */
+
+/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE      (1<<31)
+
+/* "diag" iovar argument and error code */
+#define WL_DIAG_INTERRUPT                      1       /* d11 loopback interrupt test */
+#define WL_DIAG_MEMORY                         3       /* d11 memory test */
+#define WL_DIAG_LED                            4       /* LED test */
+#define WL_DIAG_REG                            5       /* d11/phy register test */
+#define WL_DIAG_SROM                           6       /* srom read/crc test */
+#define WL_DIAG_DMA                            7       /* DMA test */
+
+#define WL_DIAGERR_SUCCESS                     0
+#define WL_DIAGERR_FAIL_TO_RUN                 1       /* unable to run requested diag */
+#define WL_DIAGERR_NOT_SUPPORTED               2       /* diag requested is not supported */
+#define WL_DIAGERR_INTERRUPT_FAIL              3       /* loopback interrupt test failed */
+#define WL_DIAGERR_LOOPBACK_FAIL               4       /* loopback data test failed */
+#define WL_DIAGERR_SROM_FAIL                   5       /* srom read failed */
+#define WL_DIAGERR_SROM_BADCRC                 6       /* srom crc failed */
+#define WL_DIAGERR_REG_FAIL                    7       /* d11/phy register test failed */
+#define WL_DIAGERR_MEMORY_FAIL                 8       /* d11 memory test failed */
+#define WL_DIAGERR_NOMEM                       9       /* diag test failed due to no memory */
+#define WL_DIAGERR_DMA_FAIL                    10      /* DMA test failed */
+
+/* Bus types */
+#define WL_SB_BUS      0       /* Silicon Backplane */
+#define WL_PCI_BUS     1       /* PCI target */
+#define WL_PCMCIA_BUS  2       /* PCMCIA target */
+
+/* band types */
+#define        WLC_BAND_AUTO           0       /* auto-select */
+#define        WLC_BAND_A              1       /* "a" band (5   Ghz) */
+#define        WLC_BAND_B              2       /* "b" band (2.4 Ghz) */
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define        WLC_PHY_TYPE_A          0
+#define        WLC_PHY_TYPE_B          1
+#define        WLC_PHY_TYPE_G          2
+#define        WLC_PHY_TYPE_NULL       0xf
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED   0       /* MAC list disabled */
+#define WLC_MACMODE_DENY       1       /* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW      2       /* Allow specified (i.e. deny unspecified) */   
+
+
+/* 54g modes (basic bits may still be overridden) */
+#define GMODE_LEGACY_B         0       /* Rateset: 1b, 2b, 5.5, 11 */
+                                       /* Preamble: Long */
+                                       /* Shortslot: Off */
+#define GMODE_AUTO             1       /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
+                                       /* Extended Rateset: 6, 9, 12, 48 */
+                                       /* Preamble: Long */
+                                       /* Shortslot: Auto */
+#define GMODE_ONLY             2       /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */
+                                       /* Extended Rateset: 6b, 9, 12b, 48 */
+                                       /* Preamble: Short required */
+                                       /* Shortslot: Auto */
+#define GMODE_B_DEFERRED       3       /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
+                                       /* Extended Rateset: 6, 9, 12, 48 */
+                                       /* Preamble: Long */
+                                       /* Shortslot: On */
+#define GMODE_PERFORMANCE      4       /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */
+                                       /* Preamble: Short required */
+                                       /* Shortslot: On and required */
+#define GMODE_LRS              5       /* Rateset: 1b, 2b, 5.5b, 11b */
+                                       /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */
+                                       /* Preamble: Long */
+                                       /* Shortslot: Auto */
+#define GMODE_MAX              6
+
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO  -1
+#define WLC_PLCP_SHORT 0
+#define WLC_PLCP_LONG  1
+
+/* values for g_protection_override */
+#define WLC_G_PROTECTION_AUTO  -1
+#define WLC_G_PROTECTION_OFF   0
+#define WLC_G_PROTECTION_ON    1
+
+/* values for g_protection_control */
+#define WLC_G_PROTECTION_CTL_OFF       0
+#define WLC_G_PROTECTION_CTL_LOCAL     1
+#define WLC_G_PROTECTION_CTL_OVERLAP   2
+
+/* Values for PM */
+#define PM_OFF 0
+#define PM_MAX 1
+#define PM_FAST 2
+
+/* interference mitigation options */
+#define        INTERFERE_NONE  0       /* off */
+#define        NON_WLAN        1       /* foreign/non 802.11 interference, no auto detect */
+#define        WLAN_MANUAL     2       /* ACI: no auto detection */
+#define        WLAN_AUTO       3       /* ACI: auto - detact */
+
+/* Message levels */
+#define WL_ERROR_VAL           0x0001
+#define WL_TRACE_VAL           0x0002
+#define WL_PRHDRS_VAL          0x0004
+#define WL_PRPKT_VAL           0x0008
+#define WL_INFORM_VAL          0x0010
+#define WL_TMP_VAL             0x0020
+#define WL_OID_VAL             0x0040
+#define WL_RATE_VAL            0x0080
+#define WL_ASSOC_VAL           0x0100
+#define WL_PRUSR_VAL           0x0200
+#define WL_PS_VAL              0x0400
+#define WL_TXPWR_VAL           0x0800
+#define WL_GMODE_VAL           0x1000
+#define WL_DUAL_VAL            0x2000
+#define WL_WSEC_VAL            0x4000
+#define WL_WSEC_DUMP_VAL       0x8000
+#define WL_LOG_VAL             0x10000
+#define WL_NRSSI_VAL           0x20000
+#define WL_LOFT_VAL            0x40000
+#define WL_REGULATORY_VAL      0x80000
+#define WL_ACI_VAL             0x100000
+
+
+/* 802.11h enforcement levels */
+#define SPECT_MNGMT_OFF         0   /* 11h disabled */
+#define SPECT_MNGMT_LOOSE       1   /* Allow scan lists to contain non-11h AP */
+                                   /* when 11h is enabled */
+#define SPECT_MNGMT_STRICT      2   /* Prine out non-11h APs from scan list */
+
+typedef struct {
+       int npulses;    /* required number of pulses at n * t_int */
+       int ncontig;    /* required number of pulses at t_int */
+       int min_pw;     /* minimum pulse width (20 MHz clocks) */
+       int max_pw;     /* maximum pulse width (20 MHz clocks) */       
+       uint16 thresh0; /* Radar detection, thresh 0 */
+       uint16 thresh1; /* Radar detection, thresh 1 */
+} wl_radar_args_t;
+
+/* radar iovar SET defines */
+#define WL_RADRA_DETECTOR_OFF          0       /* radar dector off */
+#define WL_RADAR_DETECTOR_ON           1       /* radar detector on */
+#define WL_RADAR_SIMULATED             2       /* force radar detector to declare detection once */
+
+/* dfs_status iovar-related defines */
+
+/* cac - channel availability check,
+ * ism - in-service monitoring
+ * csa - channel switching anouncement
+ */
+
+/* cac state values */
+#define WL_DFS_CACSTATE_IDLE           0       /* state for operating in non-radar channel */
+#define        WL_DFS_CACSTATE_PREISM_CAC      1       /* CAC in progress */
+#define WL_DFS_CACSTATE_ISM            2       /* ISM in progress */
+#define WL_DFS_CACSTATE_CSA            3       /* csa */
+#define WL_DFS_CACSTATE_POSTISM_CAC    4       /* ISM CAC */
+#define WL_DFS_CACSTATE_PREISM_OOC     5       /* PREISM OOC */
+#define WL_DFS_CACSTATE_POSTISM_OOC    6       /* POSTISM OOC */
+#define WL_DFS_CACSTATES               7       /* this many states exist */
+
+/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
+typedef struct {
+       uint state;             /* noted by WL_DFS_CACSTATE_XX. */
+       uint duration;          /* time spent in ms in state. */
+       /* as dfs enters ISM state, it removes the operational channel from quiet channel list
+        * and notes the channel in channel_cleared. set to 0 if no channel is cleared
+        */
+       uint channel_cleared;
+} wl_dfs_status_t;
+
+#define NUM_PWRCTRL_RATES 12
+/* 802.11h enforcement levels */
+#define SPECT_MNGMT_OFF                0               /* 11h disabled */
+#define SPECT_MNGMT_LOOSE      1               /* allow scan lists to contain non-11h AP */
+#define SPECT_MNGMT_STRICT     2               /* prune out non-11h APs from scan list */
+#define SPECT_MNGMT_11D                3               /* switch to 802.11D mode */
+
+#define WL_CHAN_VALID_HW       (1 << 0)        /* valid with current HW */
+#define WL_CHAN_VALID_SW       (1 << 1)        /* valid with current country setting */
+#define WL_CHAN_BAND_A         (1 << 2)        /* A-band channel */
+#define WL_CHAN_RADAR          (1 << 3)        /* radar sensitive  channel */
+#define WL_CHAN_INACTIVE       (1 << 4)        /* temporarily out of service due to radar */
+#define WL_CHAN_RADAR_PASSIVE  (1 << 5)        /* radar channel is in passive mode */
+
+#define WL_MPC_VAL             0x00400000
+#define WL_APSTA_VAL           0x00800000
+#define WL_DFS_VAL             0x01000000
+
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define        WL_LED_NUMGPIO          16      /* gpio 0-15 */
+
+/* led per-pin behaviors */
+#define        WL_LED_OFF              0               /* always off */
+#define        WL_LED_ON               1               /* always on */
+#define        WL_LED_ACTIVITY         2               /* activity */
+#define        WL_LED_RADIO            3               /* radio enabled */
+#define        WL_LED_ARADIO           4               /* 5  Ghz radio enabled */
+#define        WL_LED_BRADIO           5               /* 2.4Ghz radio enabled */
+#define        WL_LED_BGMODE           6               /* on if gmode, off if bmode */
+#define        WL_LED_WI1              7               
+#define        WL_LED_WI2              8               
+#define        WL_LED_WI3              9               
+#define        WL_LED_ASSOC            10              /* associated state indicator */
+#define        WL_LED_INACTIVE         11              /* null behavior (clears default behavior) */
+#define        WL_LED_NUMBEHAVIOR      12
+
+/* led behavior numeric value format */
+#define        WL_LED_BEH_MASK         0x7f            /* behavior mask */
+#define        WL_LED_AL_MASK          0x80            /* activelow (polarity) bit */
+
+
+/* maximum channels */
+#define WL_NUMCHANNELS 64      /* max # of channels in the band */
+
+/* rate check */
+#define WL_RATE_OFDM(r)                (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
+                                ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
+                                ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
+                                ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH   0       /* authenticator */
+#define WL_WDS_WPA_ROLE_SUP    1       /* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO   255     /* auto, based on mac addr value */
+
+/* afterburner_override */
+#define        ABO_AUTO                -1      /* auto - no override */
+#define        ABO_OFF                 0       /* force afterburner off */
+#define        ABO_ON                  1       /* force afterburner on */
+
+#define GMODE_AFTERBURNER 6
+
+/* number of bytes needed to define a 128-bit mask for MAC event reporting */
+#define WL_EVENTING_MASK_LEN   16
+
+/* Structures and constants used for "vndr_ie" IOVar interface */
+#define VNDR_IE_CMD_LEN                4       /* length of the set command string: "add", "del" (+ NULL) */
+
+/* 802.11 Mgmt Packet flags */
+#define VNDR_IE_BEACON_FLAG    0x1
+#define VNDR_IE_PRBRSP_FLAG    0x2
+#define VNDR_IE_ASSOCRSP_FLAG  0x4
+#define VNDR_IE_AUTHRSP_FLAG   0x8
+
+typedef struct {
+       uint32 pktflag;                 /* bitmask indicating which packet(s) contain this IE */
+       vndr_ie_t vndr_ie_data;         /* vendor IE data */
+} vndr_ie_info_t;
+
+typedef struct {
+       int iecount;                    /* number of entries in the vndr_ie_list[] array */
+       vndr_ie_info_t vndr_ie_list[1]; /* variable size list of vndr_ie_info_t structs */
+} vndr_ie_buf_t;
+
+typedef struct {
+       char cmd[VNDR_IE_CMD_LEN];      /* vndr_ie IOVar set command : "add", "del" + NULL */
+       vndr_ie_buf_t vndr_ie_buffer;   /* buffer containing Vendor IE list information */
+} vndr_ie_setbuf_t;
+
+/* join target preference types */
+#define WL_JOIN_PREF_RSSI      1       /* by RSSI, mandatory */
+#define WL_JOIN_PREF_WPA       2       /* by akm and ciphers, optional, RSN and WPA as values */
+#define WL_JOIN_PREF_BAND      3       /* by 802.11 band, optional, WLC_BAND_XXXX as values */
+
+/* band preference */
+#define WLJP_BAND_ASSOC_PREF   255     /* use assoc preference settings */
+                                       /* others use WLC_BAND_XXXX as values */
+
+/* any multicast cipher suite */
+#define WL_WPA_ACP_MCS_ANY     "\x00\x00\x00\x00"
+
+#if !defined(__GNUC__)
+#pragma pack(pop)
+#endif
+
+#define        NFIFO                           6       /* # tx/rx fifopairs */
+
+#define        WL_CNT_T_VERSION                1       /* current version of wl_cnt_t struct */
+
+typedef struct {
+       uint16  version;        /* see definition of WL_CNT_T_VERSION */        
+       uint16  length;         /* length of entire structure */
+
+       /* transmit stat counters */
+       uint32  txframe;        /* tx data frames */
+       uint32  txbyte;         /* tx data bytes */
+       uint32  txretrans;      /* tx mac retransmits */
+       uint32  txerror;        /* tx data errors */
+       uint32  txctl;          /* tx management frames */
+       uint32  txprshort;      /* tx short preamble frames */
+       uint32  txserr;         /* tx status errors */
+       uint32  txnobuf;        /* tx out of buffers errors */
+       uint32  txnoassoc;      /* tx discard because we're not associated */
+       uint32  txrunt;         /* tx runt frames */
+       uint32  txchit;         /* tx header cache hit (fastpath) */
+       uint32  txcmiss;        /* tx header cache miss (slowpath) */
+
+       /* transmit chip error counters */
+       uint32  txuflo;         /* tx fifo underflows */
+       uint32  txphyerr;       /* tx phy errors (indicated in tx status) */
+       uint32  txphycrs;       
+
+       /* receive stat counters */
+       uint32  rxframe;        /* rx data frames */
+       uint32  rxbyte;         /* rx data bytes */
+       uint32  rxerror;        /* rx data errors */
+       uint32  rxctl;          /* rx management frames */
+       uint32  rxnobuf;        /* rx out of buffers errors */
+       uint32  rxnondata;      /* rx non data frames in the data channel errors */
+       uint32  rxbadds;        /* rx bad DS errors */
+       uint32  rxbadcm;        /* rx bad control or management frames */
+       uint32  rxfragerr;      /* rx fragmentation errors */
+       uint32  rxrunt;         /* rx runt frames */
+       uint32  rxgiant;        /* rx giant frames */
+       uint32  rxnoscb;        /* rx no scb error */
+       uint32  rxbadproto;     /* rx invalid frames */
+       uint32  rxbadsrcmac;    /* rx frames with Invalid Src Mac*/
+       uint32  rxbadda;        /* rx frames tossed for invalid da */
+       uint32  rxfilter;       /* rx frames filtered out */
+
+       /* receive chip error counters */
+       uint32  rxoflo;         /* rx fifo overflow errors */
+       uint32  rxuflo[NFIFO];  /* rx dma descriptor underflow errors */
+
+       uint32  d11cnt_txrts_off;       /* d11cnt txrts value when reset d11cnt */
+       uint32  d11cnt_rxcrc_off;       /* d11cnt rxcrc value when reset d11cnt */
+       uint32  d11cnt_txnocts_off;     /* d11cnt txnocts value when reset d11cnt */
+
+       /* misc counters */
+       uint32  dmade;          /* tx/rx dma descriptor errors */
+       uint32  dmada;          /* tx/rx dma data errors */
+       uint32  dmape;          /* tx/rx dma descriptor protocol errors */
+       uint32  reset;          /* reset count */
+       uint32  tbtt;           /* cnts the TBTT int's */
+       uint32  txdmawar;       
+
+       /* MAC counters: 32-bit version of d11.h's macstat_t */
+       uint32  txallfrm;       /* total number of frames sent, incl. Data, ACK, RTS, CTS, 
+                                  Control Management (includes retransmissions) */
+       uint32  txrtsfrm;       /* number of RTS sent out by the MAC */
+       uint32  txctsfrm;       /* number of CTS sent out by the MAC */
+       uint32  txackfrm;       /* number of ACK frames sent out */
+       uint32  txdnlfrm;       /* Not used */
+       uint32  txbcnfrm;       /* beacons transmitted */
+       uint32  txfunfl[8];     /* per-fifo tx underflows */
+       uint32  txtplunfl;      /* Template underflows (mac was too slow to transmit ACK/CTS or BCN) */
+       uint32  txphyerror;     /* Transmit phy error, type of error is reported in tx-status for
+                                  driver enqueued frames*/
+       uint32  rxfrmtoolong;   /* Received frame longer than legal limit (2346 bytes) */
+       uint32  rxfrmtooshrt;   /* Received frame did not contain enough bytes for its frame type */
+       uint32  rxinvmachdr;    /* Either the protocol version != 0 or frame type not
+                                  data/control/management*/
+       uint32  rxbadfcs;       /* number of frames for which the CRC check failed in the MAC */
+       uint32  rxbadplcp;      /* parity check of the PLCP header failed */
+       uint32  rxcrsglitch;    /* PHY was able to correlate the preamble but not the header */
+       uint32  rxstrt;         /* Number of received frames with a good PLCP (i.e. passing parity check) */
+       uint32  rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
+       uint32  rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
+       uint32  rxcfrmucast;    /* number of received CNTRL frames with good FCS and matching RA */
+       uint32  rxrtsucast;     /* number of unicast RTS addressed to the MAC (good FCS) */
+       uint32  rxctsucast;     /* number of unicast CTS addressed to the MAC (good FCS)*/
+       uint32  rxackucast;     /* number of ucast ACKS received (good FCS)*/
+       uint32  rxdfrmocast;    /* number of received DATA frames with good FCS and not matching RA */
+       uint32  rxmfrmocast;    /* number of received MGMT frames with good FCS and not matching RA */
+       uint32  rxcfrmocast;    /* number of received CNTRL frame with good FCS and not matching RA */
+       uint32  rxrtsocast;     /* number of received RTS not addressed to the MAC */
+       uint32  rxctsocast;     /* number of received CTS not addressed to the MAC */
+       uint32  rxdfrmmcast;    /* number of RX Data multicast frames received by the MAC */
+       uint32  rxmfrmmcast;    /* number of RX Management multicast frames received by the MAC */
+       uint32  rxcfrmmcast;    /* number of RX Control multicast frames received by the MAC (unlikely
+                                  to see these) */
+       uint32  rxbeaconmbss;   /* beacons received from member of BSS */
+       uint32  rxdfrmucastobss; /* number of unicast frames addressed to the MAC from other BSS (WDS FRAME) */
+       uint32  rxbeaconobss;   /* beacons received from other BSS */
+       uint32  rxrsptmout;     /* Number of response timeouts for transmitted frames expecting a
+                                  response */
+       uint32  bcntxcancl;     /* transmit beacons cancelled due to receipt of beacon (IBSS) */
+       uint32  rxf0ovfl;       /* Number of receive fifo 0 overflows */
+       uint32  rxf1ovfl;       /* Number of receive fifo 1 overflows (obsolete) */
+       uint32  rxf2ovfl;       /* Number of receive fifo 2 overflows (obsolete) */
+       uint32  txsfovfl;       /* Number of transmit status fifo overflows (obsolete) */
+       uint32  pmqovfl;        /* Number of PMQ overflows */
+       uint32  rxcgprqfrm;     /* Number of received Probe requests that made it into the PRQ fifo */
+       uint32  rxcgprsqovfl;   /* Rx Probe Request Que overflow in the AP */
+       uint32  txcgprsfail;    /* Tx Probe Response Fail. AP sent probe response but did not get ACK */
+       uint32  txcgprssuc;     /* Tx Probe Rresponse Success (ACK was received) */
+       uint32  prs_timeout;    /* Number of probe requests that were dropped from the PRQ fifo because
+                                  a probe response could not be sent out within the time limit defined
+                                  in M_PRS_MAXTIME */
+       uint32  rxnack;         /* Number of NACKS received (Afterburner) */
+       uint32  frmscons;       /* Number of frames completed without transmission because of an
+                                  Afterburner re-queue */
+       uint32  txnack;         /* Number of NACKs transmtitted  (Afterburner) */
+       uint32  txglitch_nack;  /* obsolete */
+       uint32  txburst;        /* obsolete */
+       uint32  rxburst;        /* obsolete */
+
+       /* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
+       uint32  txfrag;         /* dot11TransmittedFragmentCount */
+       uint32  txmulti;        /* dot11MulticastTransmittedFrameCount */
+       uint32  txfail;         /* dot11FailedCount */
+       uint32  txretry;        /* dot11RetryCount */
+       uint32  txretrie;       /* dot11MultipleRetryCount */
+       uint32  rxdup;          /* dot11FrameduplicateCount */
+       uint32  txrts;          /* dot11RTSSuccessCount */
+       uint32  txnocts;        /* dot11RTSFailureCount */
+       uint32  txnoack;        /* dot11ACKFailureCount */
+       uint32  rxfrag;         /* dot11ReceivedFragmentCount */
+       uint32  rxmulti;        /* dot11MulticastReceivedFrameCount */
+       uint32  rxcrc;          /* dot11FCSErrorCount */
+       uint32  txfrmsnt;       /* dot11TransmittedFrameCount (bogus MIB?) */
+       uint32  rxundec;        /* dot11WEPUndecryptableCount */
+
+       /* WPA2 counters (see rxundec for DecryptFailureCount) */
+       uint32  tkipmicfaill;   /* TKIPLocalMICFailures */
+       uint32  tkipcntrmsr;    /* TKIPCounterMeasuresInvoked */
+       uint32  tkipreplay;     /* TKIPReplays */
+       uint32  ccmpfmterr;     /* CCMPFormatErrors */
+       uint32  ccmpreplay;     /* CCMPReplays */
+       uint32  ccmpundec;      /* CCMPDecryptErrors */
+       uint32  fourwayfail;    /* FourWayHandshakeFailures */
+       uint32  wepundec;       /* dot11WEPUndecryptableCount */
+       uint32  wepicverr;      /* dot11WEPICVErrorCount */
+       uint32  decsuccess;     /* DecryptSuccessCount */
+       uint32  tkipicverr;     /* TKIPICVErrorCount */
+       uint32  wepexcluded;    /* dot11WEPExcludedCount */
+} wl_cnt_t;
+
+#endif /* _wlioctl_h_ */
index 1ca1e5e..a5062c5 100644 (file)
@@ -1,7 +1,7 @@
 /*
  * Wireless Network Adapter configuration utility
  *
- * Copyright (C) 2005 Felix Fietkau <nbd@vd-s.ath.cx>
+ * Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -22,6 +22,9 @@
 #include <wlioctl.h>
 #include <signal.h>
 
+#define        ADD_VIF_RETRIES 5
+#define DEBUG
+
 /*------------------------------------------------------------------*/
 /*
  * Macro to handle errors when setting WE
@@ -85,8 +88,17 @@ static int wpa_enc = 0;
 
 static char *wl_var(char *name)
 {
-       strcpy(buffer, prefix);
-       strcat(buffer, name);
+       sprintf(buffer, "%s_%s", prefix, name);
+       return buffer;
+}
+
+static char *vif_var(int vif, char *name)
+{
+       if (vif == 0)
+               return wl_var(name);
+       
+       sprintf(buffer, "%s.%d_%s", prefix, vif, name);
+       return buffer;
 }
 
 static int nvram_enabled(char *name)
@@ -114,11 +126,16 @@ static int bcom_ioctl(int skfd, char *ifname, int cmd, void *buf, int len)
        strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
 
        ret = ioctl(skfd, SIOCDEVPRIVATE, &ifr);
+       
+#ifdef DEBUG
+       if (ret < 0)
+               fprintf(stderr, "IOCTL %d failed: %d\n", cmd, ret);
+#endif
 
        return ret;
 }
 
-static int bcom_set_val(int skfd, char *ifname, char *var, void *val, int len)
+static int bcom_set_var(int skfd, char *ifname, char *var, void *val, int len)
 {
        char buf[8192];
        int ret;
@@ -126,18 +143,128 @@ static int bcom_set_val(int skfd, char *ifname, char *var, void *val, int len)
        if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
                return -1;
 
+       bzero(buf, sizeof(buf));
        strcpy(buf, var);
        memcpy(&buf[strlen(var) + 1], val, len);
        
-       if ((ret = bcom_ioctl(skfd, ifname, WLC_SET_VAR, buf, sizeof(buf))))
-               return ret;
+       ret = bcom_ioctl(skfd, ifname, WLC_SET_VAR, buf, sizeof(buf));
+
+#ifdef DEBUG
+       if (ret < 0)
+               fprintf(stderr, "SET_VAR %s failed: %d\n", var, ret);
+#endif
+       
+       return ret;
+}
+
+static int bcom_get_var(int skfd, char *ifname, char *var, void *buf, int len)
+{
+       int ret;
+       
+       if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
+               return -1;
+
+       bzero(buf, sizeof(buf));
+       strcpy(buf, var);
+       
+       ret = bcom_ioctl(skfd, ifname, WLC_GET_VAR, buf, sizeof(buf));
 
-       return 0;       
+#ifdef DEBUG
+       if (ret < 0)
+               fprintf(stderr, "GET_VAR %s failed: %d\n", var, ret);
+#endif
+       
+       return ret;
+}
+
+static int bcom_set_bss_var(int skfd, char *ifname, int bss, char *var, void *val, int len)
+{
+       char buf[8192];
+       int i = 0, ret;
+
+       bzero(buf, sizeof(buf));
+       if (strlen(var) + len + 8 > sizeof(buf) || len > sizeof(buf))
+               return -1;
+       
+       // "bsscfg:<name>\x00" <bss> <data>
+       i = sprintf(buf, "bsscfg:%s", var);
+       buf[i++] = 0;
+                       
+       memcpy(buf + i, &bss, sizeof(bss));
+       i += sizeof(bss);
+       
+       memcpy(buf + i, val, len);
+       i += len;
+       
+       ret = bcom_ioctl(skfd, ifname, WLC_SET_VAR, buf, i);
+
+#ifdef DEBUG
+       if (ret < 0)
+               fprintf(stderr, "SET_BSS_VAR %s failed: %d\n", var, ret);
+#endif
+
+       return ret;
 }
 
 static int bcom_set_int(int skfd, char *ifname, char *var, int val)
 {
-       return bcom_set_val(skfd, ifname, var, &val, sizeof(val));
+       return bcom_set_var(skfd, ifname, var, &val, sizeof(val));
+}
+
+static int bcom_set_bss_int(int skfd, char *ifname, int bss, char *var, int val)
+{
+       return bcom_set_bss_var(skfd, ifname, bss, var, &val, sizeof(val));
+}
+
+static int is_new_bcom(int skfd, char *ifname)
+{
+       char buf[8192];
+       
+       bzero(buf, 8192);
+       bcom_ioctl(skfd, ifname, WLC_DUMP, buf, 8192);
+
+       if (strstr(buf, "3.130"))
+               return 1;
+
+       return 0;
+}
+
+static int bcom_get_wsec(int vif)
+{
+       int val; 
+
+       if (nvram_match(vif_var(vif, "crypto"), "tkip"))
+               val = TKIP_ENABLED;
+       else if (nvram_match(vif_var(vif, "crypto"), "aes"))
+               val = AES_ENABLED;
+       else if (nvram_match(vif_var(vif, "crypto"), "tkip+aes") || nvram_match(vif_var(vif, "crypto"), "aes+tkip"))
+               val = TKIP_ENABLED | AES_ENABLED;
+       else
+               val = 0;
+       
+       return val;
+}
+
+static int bcom_get_wauth(int vif)
+{
+       char *v, *next, var[80];
+       int res = 0;
+       
+       if (!(v = nvram_get(vif_var(vif, "akm"))))
+               v = nvram_safe_get(vif_var(vif, "auth_mode"));
+
+       foreach(var, v, next) {
+               if (strcmp(var, "psk") == 0)
+                       res |= WPA_AUTH_PSK;
+               else if (strcmp(var, "psk2") == 0)
+                       res |= WPA2_AUTH_PSK;
+               else if (strcmp(var, "wpa") == 0)
+                       res |= WPA_AUTH_UNSPECIFIED;
+               else if (strcmp(var, "wpa2") == 0)
+                       res |= WPA2_AUTH_UNSPECIFIED;
+       }
+
+       return res;
 }
 
 static void stop_bcom(int skfd, char *ifname)
@@ -163,7 +290,6 @@ static void start_bcom(int skfd, char *ifname)
                return;
 
        bcom_ioctl(skfd, ifname, WLC_UP, &val, sizeof(val));
-       set_wext_ssid(skfd, ifname);
 }
 
 static int setup_bcom_wds(int skfd, char *ifname)
@@ -191,10 +317,26 @@ static int setup_bcom_wds(int skfd, char *ifname)
        return wds_enabled;
 }
 
+static void set_wext_mode(skfd, ifname)
+{
+       struct iwreq wrq;
+       int ap = 0, infra = 0, wet = 0;
+       
+       /* Set operation mode */
+       ap = !nvram_match(wl_var("mode"), "sta") && !nvram_match(wl_var("mode"), "wet");
+       infra = !nvram_disabled(wl_var("infra"));
+       wet = !ap && nvram_match(wl_var("mode"), "wet");
+
+       wrq.u.mode = (!infra ? IW_MODE_ADHOC : (ap ? IW_MODE_MASTER : (wet ? IW_MODE_REPEAT : IW_MODE_INFRA)));
+       IW_SET_EXT_ERR(skfd, ifname, SIOCSIWMODE, &wrq, "Set Mode");
+}
+
+
 void start_watchdog(int skfd, char *ifname)
 {
        FILE *f;
-       unsigned char buf[8192], buf2[8192], wbuf[80], *v, *p, *next, *tmp;
+       char *v, *next;
+       unsigned char buf[8192], buf2[8192], wbuf[80], *p, *tmp;
        int wds = 0, i, restart_wds;
 
        if (fork())
@@ -242,20 +384,139 @@ void start_watchdog(int skfd, char *ifname)
        }
 }
 
-static void setup_bcom(int skfd, char *ifname)
+static void setup_bcom_vif_sec(int skfd, char *ifname, int vif)
 {
-       int val = 0, ap;
-       char buf[8192];
-       char wbuf[80];
+       int val, wep, wsec, i;
        char *v;
-       int wds_enabled = 0;
+
+       wsec = bcom_get_wsec(vif);
+       if (wsec)
+               val = bcom_get_wauth(vif);
+       else
+               val = 0;
+
+       bcom_set_bss_int(skfd, ifname, vif, "wpa_auth", val);
+
+       if (val) {
+               if (WPA_AUTH_PSK | WPA2_AUTH_PSK) {
+                       v = nvram_safe_get(wl_var("wpa_psk"));
+                       if ((strlen(v) >= 8) && (strlen(v) < 63) && nvram_match(wl_var("mode"), "wet") && (vif == 0)) {
+                               /* Enable in-driver WPA supplicant */
+                               wsec_pmk_t pmk;
+                       
+                               pmk.key_len = (unsigned short) strlen(v);
+                               pmk.flags = WSEC_PASSPHRASE;
+                               strcpy(pmk.key, v);
+                               bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
+                               bcom_set_int(skfd, ifname, "sup_wpa", 1);
+                       } else {
+                               bcom_set_int(skfd, ifname, "sup_wpa", 0);
+                       }
+               }
+               bcom_set_bss_int(skfd, ifname, vif, "eap_restrict", 1);
+               bcom_set_bss_int(skfd, ifname, vif, "wsec", wsec);
+               bcom_set_bss_int(skfd, ifname, vif, "wsec_restrict", 1);
+       } else {
+               bcom_set_bss_int(skfd, ifname, vif, "eap_restrict", 0);
+               if (wep = nvram_enabled(vif_var(vif, "wep"))) {
+                       wep = atoi(nvram_safe_get(vif_var(vif, "key")));
+                       if ((wep >= 1) && (wep <= 4)) {
+                               for (i = 1; i < 4; i++) {
+                                       wl_wsec_key_t k;
+                                       char name[5] = "key0";
+                                       unsigned char *kdata = k.data;
+                                       unsigned char *kstr;
+
+                                       bzero(&k, sizeof(k));
+                                       name[3] += i;
+                                       kstr = nvram_safe_get(vif_var(vif, name));
+                                       k.len = strlen(kstr);
+                                       if ((k.len == 10) || (k.len == 26)) {
+                                               k.index = i - 1;
+#ifdef DEBUG
+                                               fprintf(stderr, "Adding WEP key %d to VIF %d: ", i, vif);
+#endif
+                                               k.len = 0;
+                                               while (*kstr != 0) {
+                                                       strncpy(name, kstr, 2);
+                                                       name[2] = 0;
+                                                       *kdata = (unsigned char) strtoul(name, NULL, 16);
+#ifdef DEBUG
+                                                       fprintf(stderr, "%02x", *kdata);
+#endif
+                                                       kstr += 2;
+                                                       kdata++;
+                                                       k.len++;
+                                               }
+#ifdef DEBUG
+                                               fprintf(stderr, "\n");
+#endif
+                                       } else {
+                                               k.len = 0;
+                                       }
+                                       if ((k.len > 0) && (i == wep))
+                                               k.flags = WL_PRIMARY_KEY;
+
+                                       bcom_set_bss_var(skfd, ifname, vif, "wsec_key", &k, sizeof(k));
+                               }
+                               wep = 1;
+                               bcom_set_bss_int(skfd, ifname, vif, "wsec", WEP_ENABLED);
+                               bcom_set_bss_int(skfd, ifname, vif, "wsec_restrict", 1);
+                               bcom_set_bss_int(skfd, ifname, vif, "auth", 1);
+                       } else {
+                               wep = 0;
+                       }
+               }
+       }
        
-       if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
-               return;
+       if (!wep && !val) {
+               bcom_set_bss_int(skfd, ifname, vif, "wsec", 0);
+               bcom_set_bss_int(skfd, ifname, vif, "wsec_restrict", 0);
+       }
        
-       nvram_set(wl_var("ifname"), ifname);
+//     bcom_set_bss_int(skfd, ifname, vif, "auth", atoi(nvram_safe_get(vif_var(vif, "auth"))));
+}
+
+static void setup_bcom_vif(int skfd, char *ifname, int vif)
+{
+       int val, wep, wsec, i;
+       char *s, *v;
+       wlc_ssid_t ssid;
+       
+       s = nvram_safe_get(vif_var(vif, "ssid"));
+       strncpy(ssid.SSID, s, sizeof(ssid.SSID));
+       ssid.SSID_len = strlen(ssid.SSID);
+       ssid.SSID_len = ((ssid.SSID_len > sizeof(ssid.SSID)) ? sizeof(ssid.SSID) : ssid.SSID_len);
+       bcom_set_bss_var(skfd, ifname, vif, "ssid", &ssid, sizeof(ssid));
        
-       stop_bcom(skfd, ifname);
+       val = nvram_enabled(vif_var(vif, "closed"));
+       bcom_set_bss_int(skfd, ifname, vif, "closednet", val);
+
+       val = nvram_enabled(wl_var("ap_isolate"));
+       bcom_set_bss_int(skfd, ifname, vif, "ap_isolate", val);
+
+}
+       
+static void start_bcom_vif(int skfd, char *ifname, int vif)
+{
+       int cfg[2];
+       int i;
+       
+       cfg[0] = vif;
+       cfg[1] = 1;
+       for (i = 0; i < ADD_VIF_RETRIES; i++) {
+               if (bcom_set_var(skfd, ifname, "bss" , cfg, sizeof(cfg)) == 0)
+                       break;
+               usleep(1000 * 1000);
+       }
+}
+
+static void setup_bcom_common(int skfd, char *ifname)
+{
+       int val = 0, ap;
+       char buf[8192], wbuf[80], *v;
+
+       nvram_set(wl_var("ifname"), ifname);
 
        /* Set Country */
        strncpy(buf, nvram_safe_get(wl_var("country_code")), 4);
@@ -264,13 +525,8 @@ static void setup_bcom(int skfd, char *ifname)
        
        /* Set other options */
        val = nvram_enabled(wl_var("lazywds"));
-       wds_enabled = val;
        bcom_ioctl(skfd, ifname, WLC_SET_LAZYWDS, &val, sizeof(val));
-       
-       if (v = nvram_get(wl_var("frag"))) {
-               val = atoi(v);
-               bcom_ioctl(skfd, ifname, WLC_SET_FRAG, &val, sizeof(val));
-       }
+
        if (v = nvram_get(wl_var("dtim"))) {
                val = atoi(v);
                bcom_ioctl(skfd, ifname, WLC_SET_DTIMPRD, &val, sizeof(val));
@@ -279,10 +535,6 @@ static void setup_bcom(int skfd, char *ifname)
                val = atoi(v);
                bcom_ioctl(skfd, ifname, WLC_SET_BCNPRD, &val, sizeof(val));
        }
-       if (v = nvram_get(wl_var("rts"))) {
-               val = atoi(v);
-               bcom_ioctl(skfd, ifname, WLC_SET_RTS, &val, sizeof(val));
-       }
        if (v = nvram_get(wl_var("antdiv"))) {
                val = atoi(v);
                bcom_ioctl(skfd, ifname, WLC_SET_ANTDIV, &val, sizeof(val));
@@ -291,16 +543,35 @@ static void setup_bcom(int skfd, char *ifname)
                val = atoi(v);
                bcom_ioctl(skfd, ifname, WLC_SET_TXANT, &val, sizeof(val));
        }
+       if (v = nvram_get(wl_var("maxassoc"))) {
+               val = atoi(v);
+               bcom_set_int(skfd, ifname, "maxassoc", val);
+       }
        
-       val = nvram_enabled(wl_var("closed"));
-       bcom_ioctl(skfd, ifname, WLC_SET_CLOSED, &val, sizeof(val));
-
-       val = nvram_enabled(wl_var("ap_isolate"));
-       bcom_set_int(skfd, ifname, "ap_isolate", val);
-
        val = nvram_enabled(wl_var("frameburst"));
        bcom_ioctl(skfd, ifname, WLC_SET_FAKEFRAG, &val, sizeof(val));
 
+       ap = !nvram_match(wl_var("mode"), "sta") && !nvram_match(wl_var("mode"), "wet");
+
+       if (ap)
+               val = setup_bcom_wds(skfd, ifname);
+
+       if ((!ap || val) && is_new_bcom(skfd, ifname))
+               start_watchdog(skfd, ifname);
+       
+       /* Set up afterburner, disabled it if WDS is enabled */
+       if (val || nvram_enabled(wl_var("lazywds"))) {
+               val = ABO_OFF;
+       } else {
+               val = ABO_AUTO;
+               if (nvram_enabled(wl_var("afterburner")))
+                       val = ABO_ON;
+               if (nvram_disabled(wl_var("afterburner")))
+                       val = ABO_OFF;
+       }
+       
+       bcom_set_var(skfd, ifname, "afterburner_override", &val, sizeof(val));
+
        /* Set up MAC list */
        if (nvram_match(wl_var("macmode"), "allow"))
                val = WLC_MACMODE_ALLOW;
@@ -330,25 +601,6 @@ static void setup_bcom(int skfd, char *ifname)
        }
        bcom_ioctl(skfd, ifname, WLC_SET_MACMODE, &val, sizeof(val));
 
-       if (ap = !nvram_match(wl_var("mode"), "sta") && !nvram_match(wl_var("mode"), "wet"))
-               wds_enabled = setup_bcom_wds(skfd, ifname);
-
-       if (!ap || wds_enabled) 
-               start_watchdog(skfd, ifname);
-       
-       /* Set up afterburner, disabled it if WDS is enabled */
-       if (wds_enabled) {
-               val = ABO_OFF;
-       } else {
-               val = ABO_AUTO;
-               if (nvram_enabled(wl_var("afterburner")))
-                       val = ABO_ON;
-               if (nvram_disabled(wl_var("afterburner")))
-                       val = ABO_OFF;
-       }
-       
-       bcom_set_val(skfd, ifname, "afterburner_override", &val, sizeof(val));
-       
        /* Set up G mode */
        bcom_ioctl(skfd, ifname, WLC_GET_PHYTYPE, &val, sizeof(val));
        if (val == 2) {
@@ -385,53 +637,139 @@ static void setup_bcom(int skfd, char *ifname)
                        bcom_ioctl(skfd, ifname, WLC_SET_PLCPHDR, &val, sizeof(val));
                }
        }
+}
+
+static void setup_bcom_new(int skfd, char *ifname)
+{
+       int val = 0, i;
+       int iface[16], ifaces = 1;
+       int ap, apsta, sta, wet;
+       char *v;
+
+       if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) 
+               return;
+       
+       /* Clear all VIFs */
+       iface[0] = 0;
+       for (i = 0; i < 16; i++) {
+               int cfg[2]; /* index, enabled */
+               
+               cfg[0] = i;
+               cfg[1] = 0;
+               
+               bcom_set_var(skfd, ifname, "bss", cfg, sizeof(cfg));
+               
+               if ((i > 0) && nvram_enabled(vif_var(i, "enabled")) && (i == 0 || nvram_get(vif_var(i, "ssid")))) {
+                       iface[ifaces] = i;
+                       ifaces++;
+               }
+       }
+
+       set_wext_mode(skfd, ifname);
+       
+       ap = nvram_match(wl_var("mode"), "ap") || nvram_match(wl_var("mode"), "apsta");
+       apsta = nvram_match(wl_var("mode"), "apsta");
+       sta = nvram_match(wl_var("mode"), "sta");
+
+       bcom_set_int(skfd, ifname, "apsta", apsta);
+       bcom_set_int(skfd, ifname, "mssid", (ifaces > 1));
+
+       for (i = 0; i < (sta ? 0 : ifaces); i++) {
+#ifdef DEBUG
+               fprintf(stderr, "setup_bcom_vif(%d) start\n", iface[i]);
+#endif
+               setup_bcom_vif(skfd, ifname, iface[i]);
+#ifdef DEBUG
+               fprintf(stderr, "setup_bcom_vif(%d) end\n", iface[i]);
+#endif
+       }
+
+       
+       if (v = nvram_get(wl_var("rts"))) {
+               val = atoi(v);
+               bcom_set_int(skfd, ifname, "rtsthresh", val);
+       }
+       if (v = nvram_get(wl_var("frag"))) {
+               val = atoi(v);
+               bcom_set_int(skfd, ifname, "fragthresh", val);
+       }
 
+       val = (nvram_disabled(wl_var("radio")) ? (1 | (1 << 16)) : 0);
+       bcom_ioctl(skfd, ifname, WLC_SET_RADIO, &val, sizeof(val));
+
+       setup_bcom_common(skfd, ifname);
        start_bcom(skfd, ifname);
 
-       if (!(v = nvram_get(wl_var("akm"))))
-               v = nvram_safe_get(wl_var("auth_mode"));
+       val = atoi(nvram_safe_get(wl_var("channel")));
+       if (val > 0)
+               bcom_ioctl(skfd, ifname, WLC_SET_CHANNEL, &val, sizeof(val));
+       
+       val = (ap ? 15 : 0);
+       bcom_ioctl(skfd, ifname, WLC_SET_CS_SCAN_TIMER, &val, sizeof(val));
        
-       if (strstr(v, "wpa") || strstr(v, "psk")) {
-               wpa_enc = 1;
+       for (i = 0; i < (sta ? 0 : ifaces); i++) {
+               setup_bcom_vif_sec(skfd, ifname, iface[i]);
+       }
 
-               /* Set up WPA */
-               if (nvram_match(wl_var("crypto"), "tkip"))
-                       val = TKIP_ENABLED;
-               else if (nvram_match(wl_var("crypto"), "aes"))
-                       val = AES_ENABLED;
-               else if (nvram_match(wl_var("crypto"), "tkip+aes") || nvram_match(wl_var("crypto"), "aes+tkip"))
-                       val = TKIP_ENABLED | AES_ENABLED;
-               else
-                       val = 0;
-               bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
+       for (i = 0; i < (sta ? 0 : ifaces); i++) {
+               start_bcom_vif(skfd, ifname, iface[i]);
+       }
+}
 
-               if (val && strstr(v, "psk")) {
-                       val = (strstr(v, "psk2") ? 0x84 : 0x4);
-                       v = nvram_safe_get(wl_var("wpa_psk"));
-                       if ((strlen(v) >= 8) && (strlen(v) < 63)) {
-                               
-                               bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
-                               
-                               if (!nvram_match(wl_var("mode"), "wet")) {
-                                       /* Enable in-driver WPA supplicant */
-                                       wsec_pmk_t pmk;
-                                       
-                                       pmk.key_len = (unsigned short) strlen(v);
-                                       pmk.flags = WSEC_PASSPHRASE;
-                                       strcpy(pmk.key, v);
-                                       bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
-                                       bcom_set_int(skfd, ifname, "sup_wpa", 1);
-                               }
-                       }
-               } else  {
-                       val = 1;
-                       bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val));
+static void setup_bcom_old(int skfd, char *ifname)
+{
+       int val = 0, i;
+       char buf[8192];
+       char wbuf[80];
+       char *v;
+       
+       if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0)
+               return;
+       
+       setup_bcom_common(skfd, ifname);
+
+       if (v = nvram_get(wl_var("frag"))) {
+               val = atoi(v);
+               bcom_ioctl(skfd, ifname, WLC_SET_FRAG, &val, sizeof(val));
+       }
+       if (v = nvram_get(wl_var("rts"))) {
+               val = atoi(v);
+               bcom_ioctl(skfd, ifname, WLC_SET_RTS, &val, sizeof(val));
+       }
+       
+       val = nvram_enabled(wl_var("closed"));
+       bcom_ioctl(skfd, ifname, WLC_SET_CLOSED, &val, sizeof(val));
+
+       val = nvram_enabled(wl_var("ap_isolate"));
+       bcom_set_int(skfd, ifname, "ap_isolate", val);
+
+       start_bcom(skfd, ifname);
+       set_wext_ssid(skfd, ifname);
+
+       val = bcom_get_wauth(0);
+       bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
+
+       if (val & (WPA_AUTH_PSK | WPA2_AUTH_PSK)) {
+               v = nvram_safe_get(wl_var("wpa_psk"));
+               if ((strlen(v) >= 8) && (strlen(v) < 63) && nvram_match(wl_var("mode"), "wet")) {
+                       /* Enable in-driver WPA supplicant */
+                       wsec_pmk_t pmk;
+                       
+                       pmk.key_len = (unsigned short) strlen(v);
+                       pmk.flags = WSEC_PASSPHRASE;
+                       strcpy(pmk.key, v);
+                       bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk));
+                       bcom_set_int(skfd, ifname, "sup_wpa", 1);
                }
+       }
+       if (val) {
+               val = 1;
+               bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val));
+               val = bcom_get_wsec(0);
+               bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
        } else {
                val = 0;
-
                bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val));
-               bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val));
                bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val));
                bcom_set_int(skfd, ifname, "sup_wpa", 0);
        }
@@ -487,20 +825,6 @@ static void setup_wext_wep(int skfd, char *ifname)
        }
 }
 
-static void set_wext_mode(skfd, ifname)
-{
-       struct iwreq wrq;
-       int ap = 0, infra = 0, wet = 0;
-       
-       /* Set operation mode */
-       ap = !nvram_match(wl_var("mode"), "sta") && !nvram_match(wl_var("mode"), "wet");
-       infra = !nvram_disabled(wl_var("infra"));
-       wet = !ap && nvram_match(wl_var("mode"), "wet");
-
-       wrq.u.mode = (!infra ? IW_MODE_ADHOC : (ap ? IW_MODE_MASTER : (wet ? IW_MODE_REPEAT : IW_MODE_INFRA)));
-       IW_SET_EXT_ERR(skfd, ifname, SIOCSIWMODE, &wrq, "Set Mode");
-}
-
 static void setup_wext(int skfd, char *ifname)
 {
        char *buffer;
@@ -519,7 +843,6 @@ static void setup_wext(int skfd, char *ifname)
                IW_SET_EXT_ERR(skfd, ifname, SIOCSIWFREQ, &wrq, "Set Frequency");
        }
 
-
        /* Disable radio if wlX_radio is set and not enabled */
        wrq.u.txpower.disabled = nvram_disabled(wl_var("radio"));
 
@@ -552,10 +875,27 @@ static int setup_interfaces(int skfd, char *ifname, char *args[], int count)
                set_wext_mode(skfd, ifname);
                setup_wext(skfd, ifname);
        } else {
-               stop_bcom(skfd, ifname);
-               set_wext_mode(skfd, ifname);
-               setup_bcom(skfd, ifname);
-               setup_wext(skfd, ifname);
+               if (is_new_bcom(skfd, ifname)) {
+#ifdef DEBUG
+                       fprintf(stderr, "New Broadcom driver detected.\n");
+#endif
+                       stop_bcom(skfd, ifname);
+#ifdef DEBUG
+                       fprintf(stderr, "Setup start.\n");
+#endif
+                       setup_bcom_new(skfd, ifname);
+#ifdef DEBUG
+                       fprintf(stderr, "Setup done.\n");
+#endif
+               } else {
+#ifdef DEBUG
+                       fprintf(stderr, "Old Broadcom driver detected.\n");
+#endif
+                       stop_bcom(skfd, ifname);
+                       set_wext_mode(skfd, ifname);
+                       setup_bcom_old(skfd, ifname);
+                       setup_wext(skfd, ifname);
+               }
        }
        
        prefix[2]++;
@@ -569,7 +909,7 @@ int main(int argc, char **argv)
                exit(-1);
        }
 
-       prefix = strdup("wl0_");
+       prefix = strdup("wl0");
        iw_enum_devices(skfd, &setup_interfaces, NULL, 0);
        
        return 0;
This page took 0.107633 seconds and 4 git commands to generate.