generic: add rtl8366rb switch vlan fid support

Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c
index dc83ba7..e60b708 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c
@@ -972,6 +972,52 @@ int rtl8366_sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
 }
 EXPORT_SYMBOL_GPL(rtl8366_sw_set_vlan_ports);
 
+int rtl8366_sw_get_vlan_fid(struct switch_dev *dev,
+                           const struct switch_attr *attr,
+                           struct switch_val *val)
+{
+       struct rtl8366_vlan_4k vlan4k;
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       int err;
+
+       if (!smi->ops->is_vlan_valid(smi, val->port_vlan))
+               return -EINVAL;
+
+       err = smi->ops->get_vlan_4k(smi, val->port_vlan, &vlan4k);
+       if (err)
+               return err;
+
+       val->value.i = vlan4k.fid;
+
+       return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_sw_get_vlan_fid);
+
+int rtl8366_sw_set_vlan_fid(struct switch_dev *dev,
+                           const struct switch_attr *attr,
+                           struct switch_val *val)
+{
+       struct rtl8366_vlan_4k vlan4k;
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       int err;
+
+       if (!smi->ops->is_vlan_valid(smi, val->port_vlan))
+               return -EINVAL;
+
+       if (val->value.i < 0 || val->value.i > attr->max)
+               return -EINVAL;
+
+       err = smi->ops->get_vlan_4k(smi, val->port_vlan, &vlan4k);
+       if (err)
+               return err;
+
+       return rtl8366_set_vlan(smi, val->port_vlan,
+                               vlan4k.member,
+                               vlan4k.untag,
+                               val->value.i);
+}
+EXPORT_SYMBOL_GPL(rtl8366_sw_set_vlan_fid);
+
 int rtl8366_sw_get_vlan_enable(struct switch_dev *dev,
                               const struct switch_attr *attr,
                               struct switch_val *val)

diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h
index af02cfd..bdc7dfb 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h
@@ -120,6 +120,12 @@ int rtl8366_sw_get_port_mib(struct switch_dev *dev,
 int rtl8366_sw_get_vlan_info(struct switch_dev *dev,
                             const struct switch_attr *attr,
                             struct switch_val *val);
+int rtl8366_sw_get_vlan_fid(struct switch_dev *dev,
+                            const struct switch_attr *attr,
+                            struct switch_val *val);
+int rtl8366_sw_set_vlan_fid(struct switch_dev *dev,
+                            const struct switch_attr *attr,
+                            struct switch_val *val);
 int rtl8366_sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val);
 int rtl8366_sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val);
 int rtl8366_sw_get_vlan_enable(struct switch_dev *dev,

diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366rb.c b/target/linux/generic/files/drivers/net/phy/rtl8366rb.c
index ae6d429..55731ba 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/rtl8366rb.c
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366rb.c
@@ -1,5 +1,5 @@
 /*
- * Platform driver for the Realtek RTL8366S ethernet switch
+ * Platform driver for the Realtek RTL8366RB ethernet switch
  *
  * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
@@ -21,7 +21,7 @@
 #include "rtl8366_smi.h"
 
 #define RTL8366RB_DRIVER_DESC  "Realtek RTL8366RB ethernet switch driver"
-#define RTL8366RB_DRIVER_VER   "0.2.2"
+#define RTL8366RB_DRIVER_VER   "0.2.3"
 
 #define RTL8366RB_PHY_NO_MAX   4
 #define RTL8366RB_PHY_PAGE_MAX 7
@@ -182,7 +182,7 @@
 #define RTL8366RB_EB_PREIFG_MASK       (1 << RTL8366RB_EB_PREIFG_OFFSET)
 
 #define RTL8366RB_BDTH_SW_MAX          1048512
-#define RTL8366RB_BDTH_BASE            64
+#define RTL8366RB_BDTH_UNIT            64
 #define RTL8366RB_BDTH_REG_DEFAULT     16383
 
 /* QOS */
@@ -825,7 +825,7 @@ static int rtl8366rb_sw_set_port_rate_in(struct switch_dev *dev,
                return -EINVAL;
 
        if (val->value.i > 0 && val->value.i < RTL8366RB_BDTH_SW_MAX)
-               val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_BASE;
+               val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_UNIT;
        else
                val->value.i = RTL8366RB_BDTH_REG_DEFAULT;
 
@@ -851,7 +851,7 @@ static int rtl8366rb_sw_get_port_rate_in(struct switch_dev *dev,
        if (data < RTL8366RB_IB_BDTH_MASK)
                data += 1;
 
-       val->value.i = (int)data * RTL8366RB_BDTH_BASE;
+       val->value.i = (int)data * RTL8366RB_BDTH_UNIT;
 
        return 0;
 }
@@ -870,7 +870,7 @@ static int rtl8366rb_sw_set_port_rate_out(struct switch_dev *dev,
                (RTL8366RB_QOS_DEFAULT_PREIFG << RTL8366RB_EB_PREIFG_OFFSET));
 
        if (val->value.i > 0 && val->value.i < RTL8366RB_BDTH_SW_MAX)
-               val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_BASE;
+               val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_UNIT;
        else
                val->value.i = RTL8366RB_BDTH_REG_DEFAULT;
 
@@ -894,7 +894,7 @@ static int rtl8366rb_sw_get_port_rate_out(struct switch_dev *dev,
        if (data < RTL8366RB_EB_BDTH_MASK)
                data += 1;
 
-       val->value.i = (int)data * RTL8366RB_BDTH_BASE;
+       val->value.i = (int)data * RTL8366RB_BDTH_UNIT;
 
        return 0;
 }
@@ -1065,6 +1065,13 @@ static struct switch_attr rtl8366rb_vlan[] = {
                .max = 1,
                .set = NULL,
                .get = rtl8366_sw_get_vlan_info,
+       }, {
+               .type = SWITCH_TYPE_INT,
+               .name = "fid",
+               .description = "Get/Set vlan FID",
+               .max = RTL8366RB_FIDMAX,
+               .set = rtl8366_sw_set_vlan_fid,
+               .get = rtl8366_sw_get_vlan_fid,
        },
 };