linux/ar71xx: add 2.6.38 preliminary support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/config-2.6.38 b/target/linux/ar71xx/config-2.6.38
new file mode 100644 (file)
index 0000000..d35330d
--- /dev/null
+++ b/target/linux/ar71xx/config-2.6.38
@@ -0,0 +1,198 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR71XX_DEV_AP91_PCI=y
+CONFIG_AR71XX_DEV_AP94_PCI=y
+CONFIG_AR71XX_DEV_AR9XXX_WMAC=y
+CONFIG_AR71XX_DEV_DB120_PCI=y
+CONFIG_AR71XX_DEV_DSA=y
+CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
+CONFIG_AR71XX_DEV_LEDS_GPIO=y
+CONFIG_AR71XX_DEV_M25P80=y
+CONFIG_AR71XX_DEV_PB42_PCI=y
+CONFIG_AR71XX_DEV_PB9X_PCI=y
+CONFIG_AR71XX_DEV_USB=y
+CONFIG_AR71XX_MACH_AP81=y
+CONFIG_AR71XX_MACH_AP83=y
+CONFIG_AR71XX_MACH_AP96=y
+CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DB120=y
+CONFIG_AR71XX_MACH_DIR_600_A1=y
+CONFIG_AR71XX_MACH_DIR_615_C1=y
+CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
+CONFIG_AR71XX_MACH_JA76PF=y
+CONFIG_AR71XX_MACH_JWAP003=y
+CONFIG_AR71XX_MACH_MZK_W04NU=y
+CONFIG_AR71XX_MACH_MZK_W300NH=y
+CONFIG_AR71XX_MACH_NBG460N=y
+CONFIG_AR71XX_MACH_PB42=y
+CONFIG_AR71XX_MACH_PB44=y
+CONFIG_AR71XX_MACH_PB92=y
+CONFIG_AR71XX_MACH_RB4XX=y
+CONFIG_AR71XX_MACH_RB750=y
+CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_MR3X20=y
+CONFIG_AR71XX_MACH_TL_WA901ND=y
+CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
+CONFIG_AR71XX_MACH_TL_WR1043ND=y
+CONFIG_AR71XX_MACH_TL_WR741ND=y
+CONFIG_AR71XX_MACH_TL_WR841N_V1=y
+CONFIG_AR71XX_MACH_TL_WR941ND=y
+CONFIG_AR71XX_MACH_UBNT=y
+CONFIG_AR71XX_MACH_WNDR3700=y
+CONFIG_AR71XX_MACH_WNR2000=y
+CONFIG_AR71XX_MACH_WP543=y
+CONFIG_AR71XX_MACH_WRT160NL=y
+CONFIG_AR71XX_MACH_WRT400N=y
+CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
+CONFIG_AR71XX_MACH_ZCN_1523H=y
+CONFIG_AR71XX_NVRAM=y
+CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
+CONFIG_AR71XX_WDT=y
+CONFIG_AR8216_PHY=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS_AR71XX=y
+# CONFIG_AUTO_IRQ_AFFINITY is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_GENERIC_PENDING_IRQ is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HARDIRQS_SW_RESEND is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+# CONFIG_HAVE_SPARSE_IRQ is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_IP17XX_PHY=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IRQ_CPU=y
+# CONFIG_IRQ_PER_CPU is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_RB750 is not set
+# CONFIG_LEDS_WNDR3700_USB is not set
+CONFIG_LOONGSON_UART_BASE=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MACH_NO_WESTBRIDGE=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MTD_AR91XX_FLASH=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_AR71XX=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_PB44=y
+CONFIG_SWCONFIG=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_YAFFS_DISABLE_TAGS_ECC is not set
+# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
+# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
+# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
+# CONFIG_YAFFS_XATTR is not set

diff --git a/target/linux/ar71xx/patches-2.6.38/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.38/001-ar71xx_core.patch
new file mode 100644 (file)
index 0000000..2d15f0c
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/001-ar71xx_core.patch
@@ -0,0 +1,50 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -158,6 +158,13 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W
+ endif
+ cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
+ 
++#
++# Atheros AR71xx
++#
++core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
++cflags-$(CONFIG_ATHEROS_AR71XX)       += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
++load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
++
+ cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)        += $(call cc-option,-mfix-r4000,)
+ cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)        += $(call cc-option,-mfix-r4400,)
+ cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)        += $(call cc-option,-mno-daddi,)
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -83,6 +83,23 @@ config ATH79
+       help
+         Support for the Atheros AR71XX/AR724X/AR913X SoCs.
+ 
++config ATHEROS_AR71XX
++      bool "Atheros AR71xx based boards"
++      select CEVT_R4K
++      select CSRC_R4K
++      select DMA_NONCOHERENT
++      select HW_HAS_PCI
++      select IRQ_CPU
++      select ARCH_REQUIRE_GPIOLIB
++      select SYS_HAS_CPU_MIPS32_R1
++      select SYS_HAS_CPU_MIPS32_R2
++      select SYS_SUPPORTS_32BIT_KERNEL
++      select SYS_SUPPORTS_BIG_ENDIAN
++      select SYS_HAS_EARLY_PRINTK
++      select MIPS_MACHINE
++      help
++        Support for Atheros AR71xx based boards.
++
+ config BCM47XX
+       bool "Broadcom BCM47XX based boards"
+       select CEVT_R4K
+@@ -738,6 +755,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
+ endchoice
+ 
+ source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ar71xx/Kconfig"
+ source "arch/mips/ath79/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"

diff --git a/target/linux/ar71xx/patches-2.6.38/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.38/002-ar71xx_pci.patch
new file mode 100644 (file)
index 0000000..3facce9
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/002-ar71xx_pci.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)     += ops-tx4927.o
+ obj-$(CONFIG_BCM47XX)         += pci-bcm47xx.o
+ obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
+                                       ops-bcm63xx.o
++obj-$(CONFIG_ATHEROS_AR71XX)  += pci-ar71xx.o pci-ar724x.o
+ 
+ #
+ # These are still pretty much in the old state, watch, go blind.

diff --git a/target/linux/ar71xx/patches-2.6.38/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.38/003-ar71xx_usb_host.patch
new file mode 100644 (file)
index 0000000..672c63a
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/003-ar71xx_usb_host.patch
@@ -0,0 +1,58 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -118,6 +118,13 @@ config XPS_USB_HCD_XILINX
+ config USB_FSL_MPH_DR_OF
+       tristate
+ 
++config USB_EHCI_AR71XX
++      bool "USB EHCI support for AR71xx"
++      depends on USB_EHCI_HCD && ATHEROS_AR71XX
++      default y
++      help
++        Support for Atheros AR71xx built-in EHCI controller
++
+ config USB_EHCI_FSL
+       bool "Support for Freescale on-chip EHCI USB controller"
+       depends on USB_EHCI_HCD && FSL_SOC
+@@ -261,6 +268,13 @@ config USB_OHCI_HCD_OMAP3
+         Enables support for the on-chip OHCI controller on
+         OMAP3 and later chips.
+ 
++config USB_OHCI_AR71XX
++      bool "USB OHCI support for Atheros AR71xx"
++      depends on USB_OHCI_HCD && ATHEROS_AR71XX
++      default y
++      help
++        Support for Atheros AR71xx built-in OHCI controller
++
+ config USB_OHCI_HCD_PPC_SOC
+       bool "OHCI support for on-chip PPC USB controller"
+       depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1254,6 +1254,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER               ehci_msm_driver
+ #endif
+ 
++#ifdef CONFIG_USB_EHCI_AR71XX
++#include "ehci-ar71xx.c"
++#define PLATFORM_DRIVER               ehci_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+     !defined(XILINX_OF_PLATFORM_DRIVER)
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1122,6 +1122,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER               ohci_hcd_cns3xxx_driver
+ #endif
+ 
++#ifdef CONFIG_USB_OHCI_AR71XX
++#include "ohci-ar71xx.c"
++#define PLATFORM_DRIVER               ohci_hcd_ar71xx_driver
++#endif
++
+ #if   !defined(PCI_DRIVER) &&         \
+       !defined(PLATFORM_DRIVER) &&    \
+       !defined(OMAP1_PLATFORM_DRIVER) &&      \

diff --git a/target/linux/ar71xx/patches-2.6.38/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.38/004-ar71xx_spi_controller.patch
new file mode 100644 (file)
index 0000000..5bb8b32
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/004-ar71xx_spi_controller.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -61,6 +61,13 @@ config SPI_ATH79
+         This enables support for the SPI controller present on the
+         Atheros AR71XX/AR724X/AR913X SoCs.
+ 
++config SPI_AR71XX
++      tristate "Atheros AR71xx SPI Controller"
++      depends on SPI_MASTER && ATHEROS_AR71XX
++      select SPI_BITBANG
++      help
++        This is the SPI contoller driver for Atheros AR71xx.
++
+ config SPI_ATMEL
+       tristate "Atmel SPI Controller"
+       depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
+ obj-$(CONFIG_SPI_MASTER)              += spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AR71XX)              += ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)                       += atmel_spi.o
+ obj-$(CONFIG_SPI_ATH79)                       += ath79_spi.o
+ obj-$(CONFIG_SPI_BFIN)                        += spi_bfin5xx.o

diff --git a/target/linux/ar71xx/patches-2.6.38/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.38/005-ar71xx_mac_driver.patch
new file mode 100644 (file)
index 0000000..4f6cdb6
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/005-ar71xx_mac_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2061,6 +2061,8 @@ config ACENIC_OMIT_TIGON_I
+ 
+         The safe and default value for this is N.
+ 
++source drivers/net/ag71xx/Kconfig
++
+ config DL2K
+       tristate "DL2000/TC902x-based Gigabit Ethernet support"
+       depends on PCI
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -112,6 +112,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
+ # end link order section
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_SUNDANCE) += sundance.o
+ obj-$(CONFIG_HAMACHI) += hamachi.o
+ obj-$(CONFIG_NET) += Space.o loopback.o

diff --git a/target/linux/ar71xx/patches-2.6.38/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.38/006-ar71xx_wdt_driver.patch
new file mode 100644 (file)
index 0000000..dbe4ae6
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/006-ar71xx_wdt_driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -972,6 +972,13 @@ config BCM63XX_WDT
+         To compile this driver as a loadable module, choose M here.
+         The module will be called bcm63xx_wdt.
+ 
++config AR71XX_WDT
++      tristate "Atheros AR71xx Watchdog Timer"
++      depends on ATHEROS_AR71XX
++      help
++        Hardware driver for the built-in watchdog timer on the Atheros
++        AR71xx SoCs.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -117,6 +117,7 @@ obj-$(CONFIG_INDYDOG) += indydog.o
+ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o

diff --git a/target/linux/ar71xx/patches-2.6.38/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.38/007-ar91xx_flash_driver.patch
new file mode 100644 (file)
index 0000000..1bb504c
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/007-ar91xx_flash_driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -260,6 +260,13 @@ config MTD_BCM963XX
+         Support for parsing CFE image tag and creating MTD partitions on
+         Broadcom BCM63xx boards.
+ 
++config MTD_AR91XX_FLASH
++      tristate "Atheros AR91xx parallel flash support"
++      depends on ATHEROS_AR71XX
++      select MTD_COMPLEX_MAPPINGS
++      help
++        Parallel flash driver for the Atheros AR91xx based boards.
++
+ config MTD_DILNETPC
+       tristate "CFI Flash device mapped on DIL/Net PC"
+       depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
+ obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
+ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+ obj-$(CONFIG_MTD_PCI)         += pci.o
++obj-$(CONFIG_MTD_AR91XX_FLASH)        += ar91xx_flash.o
+ obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
+ obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
+ obj-$(CONFIG_MTD_IMPA7)               += impa7.o

diff --git a/target/linux/ar71xx/patches-2.6.38/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.38/101-ksz8041_phy_driver.patch
new file mode 100644 (file)
index 0000000..5f7840f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/101-ksz8041_phy_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -118,6 +118,11 @@ config RTL8306_PHY
+       tristate "Driver for Realtek RTL8306S switches"
+       select SWCONFIG
+ 
++config MICREL_PHY
++      tristate "Drivers for Micrel/Kendin PHYs"
++      ---help---
++        Currently has a driver for the KSZ8041
++
+ config FIXED_PHY
+       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+       depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)    += rtl8366_smi
+ obj-$(CONFIG_RTL8366S_PHY)    += rtl8366s.o
+ obj-$(CONFIG_RTL8366RB_PHY)   += rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
++obj-$(CONFIG_MICREL_PHY)      += micrel.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)               += mdio-gpio.o

diff --git a/target/linux/ar71xx/patches-2.6.38/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.38/102-mtd_m25p80_add_myloader_parser.patch
new file mode 100644 (file)
index 0000000..003b922
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/102-mtd_m25p80_add_myloader_parser.patch
@@ -0,0 +1,19 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -965,6 +965,16 @@ static int __devinit m25p_probe(struct s
+                                       part_probes, &parts, 0);
+               }
+ 
++#ifdef CONFIG_MTD_MYLOADER_PARTS
++              if (nr_parts <= 0) {
++                      static const char *part_probes[]
++                                      = { "MyLoader", NULL, };
++
++                      nr_parts = parse_mtd_partitions(&flash->mtd,
++                                      part_probes, &parts, 0);
++              }
++#endif
++
+               if (nr_parts <= 0 && data && data->parts) {
+                       parts = data->parts;
+                       nr_parts = data->nr_parts;

diff --git a/target/linux/ar71xx/patches-2.6.38/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.38/104-mtd_m25p80_add_redboot_parser.patch
new file mode 100644 (file)
index 0000000..989ab7e
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/104-mtd_m25p80_add_redboot_parser.patch
@@ -0,0 +1,18 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -975,6 +975,15 @@ static int __devinit m25p_probe(struct s
+               }
+ #endif
+ 
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++              if (nr_parts <= 0) {
++                      static const char *part_probes[]
++                                      = { "RedBoot", NULL, };
++
++                      nr_parts = parse_mtd_partitions(&flash->mtd,
++                                      part_probes, &parts, 0);
++              }
++#endif
+               if (nr_parts <= 0 && data && data->parts) {
+                       parts = data->parts;
+                       nr_parts = data->nr_parts;

diff --git a/target/linux/ar71xx/patches-2.6.38/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.38/107-mtd-SST39VF6401B-support.patch
new file mode 100644 (file)
index 0000000..246abd5
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/107-mtd-SST39VF6401B-support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160    0x2782
+ #define SST39VF1601   0x234b
+ #define SST39VF3201   0x235b
++#define SST39VF6401B  0x236d
+ #define SST39WF1601   0x274b
+ #define SST39WF1602   0x274a
+ #define SST39LF512    0x00D4
+@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
+                       ERASEINFO(0x10000,64),
+               }
+       }, {
++              .mfr_id         = CFI_MFR_SST,
++              .dev_id         = SST39VF6401B,
++              .name           = "SST 39VF6401B",
++              .devtypes       = CFI_DEVICETYPE_X16,
++              .uaddr          = MTD_UADDR_0xAAAA_0x5555,
++              .dev_size       = SIZE_8MiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x10000,128)
++              }
++      }, {
+               .mfr_id         = CFI_MFR_ST,
+               .dev_id         = M29F800AB,
+               .name           = "ST M29F800AB",

diff --git a/target/linux/ar71xx/patches-2.6.38/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.38/108-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644 (file)
index 0000000..dcaf8c1
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/108-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1218,8 +1218,8 @@ static int __xipram do_write_oneword(str
+                       break;
+               }
+ 
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, datum))
++                      goto enable_xip;
+ 
+               /* Latency issues. Drop the lock, wait a while and retry */
+               UDELAY(map, chip, adr, 1);
+@@ -1235,6 +1235,8 @@ static int __xipram do_write_oneword(str
+ 
+               ret = -EIO;
+       }
++
++ enable_xip:
+       xip_enable(map, chip, adr);
+  op_done:
+       chip->state = FL_READY;
+@@ -1566,7 +1568,6 @@ static int cfi_amdstd_write_buffers(stru
+       return 0;
+ }
+ 
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -1630,8 +1631,8 @@ static int __xipram do_erase_chip(struct
+                       chip->erase_suspended = 0;
+               }
+ 
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, map_word_ff(map)))
++                      goto op_done;
+ 
+               if (time_after(jiffies, timeo)) {
+                       printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1651,6 +1652,7 @@ static int __xipram do_erase_chip(struct
+               ret = -EIO;
+       }
+ 
++ op_done:
+       chip->state = FL_READY;
+       xip_enable(map, chip, adr);
+       put_chip(map, chip, adr);
+@@ -1718,9 +1720,9 @@ static int __xipram do_erase_oneblock(st
+                       chip->erase_suspended = 0;
+               }
+ 
+-              if (chip_ready(map, adr)) {
++              if (chip_good(map, adr, map_word_ff(map))) {
+                       xip_enable(map, chip, adr);
+-                      break;
++                      goto op_done;
+               }
+ 
+               if (time_after(jiffies, timeo)) {
+@@ -1742,6 +1744,7 @@ static int __xipram do_erase_oneblock(st
+               ret = -EIO;
+       }
+ 
++ op_done:
+       chip->state = FL_READY;
+       put_chip(map, chip, adr);
+       mutex_unlock(&chip->mutex);

diff --git a/target/linux/ar71xx/patches-2.6.38/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.38/109-mtd-wrt160nl-trx-parser.patch
new file mode 100644 (file)
index 0000000..294d873
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/109-mtd-wrt160nl-trx-parser.patch
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -984,6 +984,16 @@ static int __devinit m25p_probe(struct s
+                                       part_probes, &parts, 0);
+               }
+ #endif
++
++#ifdef CONFIG_MTD_WRT160NL_PARTS
++              if (nr_parts <= 0) {
++                      static const char *part_probes[]
++                                      = { "wrt160nl", NULL, };
++
++                      nr_parts = parse_mtd_partitions(&flash->mtd,
++                                      part_probes, &parts, 0);
++              }
++#endif
+               if (nr_parts <= 0 && data && data->parts) {
+                       parts = data->parts;
+                       nr_parts = data->nr_parts;
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -184,6 +184,12 @@ config MTD_AR7_PARTS
+ 
+ endif # MTD_PARTITIONS
+ 
++config MTD_WRT160NL_PARTS
++      tristate "Linksys WRT160NL partitioning support"
++      depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
++      ---help---
++         Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+       tristate "MyLoader partition parsing"
+       depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+ obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)   += ar7part.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.

diff --git a/target/linux/ar71xx/patches-2.6.38/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.38/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
new file mode 100644 (file)
index 0000000..aeec79c
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
@@ -0,0 +1,22 @@
+--- a/drivers/usb/host/ehci-q.c
++++ b/drivers/usb/host/ehci-q.c
+@@ -1181,6 +1181,9 @@ static void end_unlink_async (struct ehc
+               ehci->reclaim = NULL;
+               start_unlink_async (ehci, next);
+       }
++
++      if (ehci->has_synopsys_hc_bug)
++              writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ }
+ 
+ /* makes sure the async qh will become idle */
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -134,6 +134,7 @@ struct ehci_hcd {                  /* one per controlle
+       unsigned                amd_l1_fix:1;
+       unsigned                fs_i_thresh:1;  /* Intel iso scheduling */
+       unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
++      unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
+ 
+       /* required for usb32 quirk */
+       #define OHCI_CTRL_HCFS          (3 << 6)

diff --git a/target/linux/ar71xx/patches-2.6.38/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.38/111-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644 (file)
index 0000000..8084605
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/111-mtd-cfi_cmdset_0002-force-word-write.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -50,7 +50,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+       struct map_info *map = mtd->priv;
+@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
+               mtd->write = cfi_amdstd_write_buffers;
+       }
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1378,6 +1382,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+                                   unsigned long adr, const u_char *buf,
+                                   int len)
+@@ -1488,7 +1493,6 @@ static int __xipram do_write_buffer(stru
+       return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+                                   size_t *retlen, const u_char *buf)
+ {
+@@ -1567,6 +1571,7 @@ static int cfi_amdstd_write_buffers(stru
+ 
+       return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Handle devices with one erase region, that only implement

diff --git a/target/linux/ar71xx/patches-2.6.38/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.38/120-dsa-trailer-tag-validation-fix.patch
new file mode 100644 (file)
index 0000000..3e3902b
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/120-dsa-trailer-tag-validation-fix.patch
@@ -0,0 +1,11 @@
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
+ 
+       trailer = skb_tail_pointer(skb) - 4;
+       if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-          (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++          (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+               goto out_drop;
+ 
+       source_port = trailer[1] & 7;

diff --git a/target/linux/ar71xx/patches-2.6.38/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.38/121-dsa-add-88e6063-driver.patch
new file mode 100644 (file)
index 0000000..1a11a69
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/121-dsa-add-88e6063-driver.patch
@@ -0,0 +1,26 @@
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
+         This enables support for the Marvell 88E6060 ethernet switch
+         chip.
+ 
++config NET_DSA_MV88E6063
++      bool "Marvell 88E6063 ethernet switch chip support"
++      select NET_DSA_TAG_TRAILER
++      ---help---
++        This enables support for the Marvell 88E6063 ethernet switch
++        chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+       bool
+       default n
+--- a/net/dsa/Makefile
++++ b/net/dsa/Makefile
+@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
+ # switch drivers
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
+ obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
+ 

diff --git a/target/linux/ar71xx/patches-2.6.38/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.38/140-redboot_partition_scan.patch
new file mode 100644 (file)
index 0000000..a09271a
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/140-redboot_partition_scan.patch
@@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru
+       static char nullstring[] = "unallocated";
+ #endif
+ 
++      buf = vmalloc(master->erasesize);
++      if (!buf)
++              return -ENOMEM;
++
++ restart:
+       if ( directory < 0 ) {
+               offset = master->size + directory * master->erasesize;
+-              while (master->block_isbad && 
++              while (master->block_isbad &&
+                      master->block_isbad(master, offset)) {
+                       if (!offset) {
+                       nogood:
+                               printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++                              vfree(buf);
+                               return -EIO;
+                       }
+                       offset -= master->erasesize;
+               }
+       } else {
+               offset = directory * master->erasesize;
+-              while (master->block_isbad && 
++              while (master->block_isbad &&
+                      master->block_isbad(master, offset)) {
+                       offset += master->erasesize;
+                       if (offset == master->size)
+                               goto nogood;
+               }
+       }
+-      buf = vmalloc(master->erasesize);
+-
+-      if (!buf)
+-              return -ENOMEM;
+-
+       printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+              master->name, offset);
+ 
+@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru
+       }
+       if (i == numslots) {
+               /* Didn't find it */
++              if (offset + master->erasesize < master->size) {
++                      /* not at the end of the flash yet, maybe next block :) */
++                      directory++;
++                      goto restart;
++              }
+               printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+                      master->name);
+               ret = 0;

diff --git a/target/linux/ar71xx/patches-2.6.38/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.38/150-drivers-link-spi-before-mtd.patch
new file mode 100644 (file)
index 0000000..f72f8ad
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/150-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -46,8 +46,8 @@ obj-$(CONFIG_IDE)            += ide/
+ obj-$(CONFIG_SCSI)            += scsi/
+ obj-$(CONFIG_ATA)             += ata/
+ obj-$(CONFIG_TARGET_CORE)     += target/
+-obj-$(CONFIG_MTD)             += mtd/
+ obj-$(CONFIG_SPI)             += spi/
++obj-$(CONFIG_MTD)             += mtd/
+ obj-y                         += net/
+ obj-$(CONFIG_ATM)             += atm/
+ obj-$(CONFIG_FUSION)          += message/

diff --git a/target/linux/ar71xx/patches-2.6.38/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.38/151-spi-add-various-flags.patch
new file mode 100644 (file)
index 0000000..b51f68f
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/151-spi-add-various-flags.patch
@@ -0,0 +1,19 @@
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -441,6 +441,8 @@ struct spi_transfer {
+       dma_addr_t      rx_dma;
+ 
+       unsigned        cs_change:1;
++      unsigned        verify:1;
++      unsigned        fast_write:1;
+       u8              bits_per_word;
+       u16             delay_usecs;
+       u32             speed_hz;
+@@ -482,6 +484,7 @@ struct spi_message {
+       struct spi_device       *spi;
+ 
+       unsigned                is_dma_mapped:1;
++      unsigned                fast_read:1;
+ 
+       /* REVISIT:  we might want a flag affecting the behavior of the
+        * last transfer ... allowing things like "read 16 bit length L"

diff --git a/target/linux/ar71xx/patches-2.6.38/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.38/152-rb4xx-spi-driver.patch
new file mode 100644 (file)
index 0000000..9fcf5cc
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/152-rb4xx-spi-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -304,6 +304,12 @@ config SPI_PXA2XX
+ config SPI_PXA2XX_PCI
+       def_bool SPI_PXA2XX && X86_32 && PCI
+ 
++config SPI_RB4XX
++      tristate "Mikrotik RB4XX SPI master"
++      depends on SPI_MASTER && AR71XX_MACH_RB4XX
++      help
++        SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on ARCH_S3C2410 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_SPI_SH_SCI)             += spi_sh_sci.
+ obj-$(CONFIG_SPI_SH_MSIOF)            += spi_sh_msiof.o
+ obj-$(CONFIG_SPI_STMP3XXX)            += spi_stmp.o
+ obj-$(CONFIG_SPI_NUC900)              += spi_nuc900.o
++obj-$(CONFIG_SPI_RB4XX)                       += rb4xx_spi.o
+ 
+ # special build for s3c24xx spi driver with fiq support
+ spi_s3c24xx_hw-y                      := spi_s3c24xx.o

diff --git a/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch
new file mode 100644 (file)
index 0000000..109e815
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -450,6 +450,13 @@ config SPI_TLE62X0
+         sysfs interface, with each line presented as a kind of GPIO
+         exposing both switch control and diagnostic feedback.
+ 
++config SPI_RB4XX_CPLD
++      tristate "MikroTik RB4XX CPLD driver"
++      depends on AR71XX_MACH_RB4XX
++      help
++        SPI driver for the Xilinx CPLD chip present on the
++        MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -61,6 +61,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
+ #     ... add above this line ...
+ 
+ # SPI protocol drivers (device/link on bus)
++obj-$(CONFIG_SPI_RB4XX_CPLD)  += spi_rb4xx_cpld.o
+ obj-$(CONFIG_SPI_SPIDEV)      += spidev.o
+ obj-$(CONFIG_SPI_TLE62X0)     += tle62x0.o
+ #     ... add above this line ...

diff --git a/target/linux/ar71xx/patches-2.6.38/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.38/200-rb4xx_nand_driver.patch
new file mode 100644 (file)
index 0000000..8c15ebf
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/200-rb4xx_nand_driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -533,4 +533,8 @@ config MTD_NAND_FSMC
+         Enables support for NAND Flash chips on the ST Microelectronics
+         Flexible Static Memory Controller (FSMC)
+ 
++config MTD_NAND_RB4XX
++      tristate "NAND flash driver for RouterBoard 4xx series"
++      depends on MTD_NAND && AR71XX_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)               += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)         += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o

diff --git a/target/linux/ar71xx/patches-2.6.38/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.38/201-ap83_spi_controller.patch
new file mode 100644 (file)
index 0000000..b4f676e
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/201-ap83_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
+ obj-$(CONFIG_SPI_MASTER)              += spi.o
+ 
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AP83)                        += ap83_spi.o
+ obj-$(CONFIG_SPI_AR71XX)              += ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL)                       += atmel_spi.o
+ obj-$(CONFIG_SPI_ATH79)                       += ath79_spi.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -61,6 +61,14 @@ config SPI_ATH79
+         This enables support for the SPI controller present on the
+         Atheros AR71XX/AR724X/AR913X SoCs.
+ 
++config SPI_AP83
++      tristate "Atheros AP83 specific SPI Controller"
++      depends on SPI_MASTER && AR71XX_MACH_AP83
++      select SPI_BITBANG
++      help
++        This is a specific SPI controller driver for the Atheros AP83
++        reference board.
++
+ config SPI_AR71XX
+       tristate "Atheros AR71xx SPI Controller"
+       depends on SPI_MASTER && ATHEROS_AR71XX

diff --git a/target/linux/ar71xx/patches-2.6.38/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.38/202-spi_vsc7385_driver.patch
new file mode 100644 (file)
index 0000000..86775f6
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/202-spi_vsc7385_driver.patch
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -465,6 +465,11 @@ config SPI_RB4XX_CPLD
+         SPI driver for the Xilinx CPLD chip present on the
+         MikroTik RB4xx boards.
+ 
++config SPI_VSC7385
++      tristate "Vitesse VSC7385 ethernet switch driver"
++      help
++        SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -64,6 +64,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
+ # SPI protocol drivers (device/link on bus)
+ obj-$(CONFIG_SPI_RB4XX_CPLD)  += spi_rb4xx_cpld.o
+ obj-$(CONFIG_SPI_SPIDEV)      += spidev.o
++obj-$(CONFIG_SPI_VSC7385)     += spi_vsc7385.o
+ obj-$(CONFIG_SPI_TLE62X0)     += tle62x0.o
+ #     ... add above this line ...
+ 

diff --git a/target/linux/ar71xx/patches-2.6.38/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.38/203-pb44_spi_controller.patch
new file mode 100644 (file)
index 0000000..8e9f770
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/203-pb44_spi_controller.patch
@@ -0,0 +1,27 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -76,6 +76,14 @@ config SPI_AR71XX
+       help
+         This is the SPI contoller driver for Atheros AR71xx.
+ 
++config SPI_PB44
++      tristate "Atheros PB44 board specific SPI controller"
++      depends on SPI_MASTER && AR71XX_MACH_PB44
++      select SPI_BITBANG
++      help
++        This is a specific SPI controller driver for the Atheros PB44
++        reference board.
++
+ config SPI_ATMEL
+       tristate "Atmel SPI Controller"
+       depends on (ARCH_AT91 || AVR32)
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_SPI_GPIO)                       += spi_gpio.o
+ obj-$(CONFIG_SPI_GPIO_OLD)            += spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)                 += spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)            += spi_lm70llp.o
++obj-$(CONFIG_SPI_PB44)                        += pb44_spi.o
+ obj-$(CONFIG_SPI_PXA2XX)              += pxa2xx_spi.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += pxa2xx_spi_pci.o
+ obj-$(CONFIG_SPI_OMAP_UWIRE)          += omap_uwire.o

diff --git a/target/linux/ar71xx/patches-2.6.38/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.38/205-wndr3700-usb-led-driver.patch
new file mode 100644 (file)
index 0000000..9fb5ffa
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/205-wndr3700-usb-led-driver.patch
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -377,6 +377,13 @@ config LEDS_TRIGGERS
+         These triggers allow kernel events to drive the LEDs and can
+         be configured via sysfs. If unsure, say Y.
+ 
++config LEDS_WNDR3700_USB
++      tristate "NETGEAR WNDR3700 USB LED driver"
++      depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
++      help
++        This option enables support for the USB LED found on the
++        NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X)            += leds-da903
+ obj-$(CONFIG_LEDS_WM831X_STATUS)      += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)                        += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}               += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)          += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)               += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)             += leds-lt3593.o

diff --git a/target/linux/ar71xx/patches-2.6.38/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.38/206-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644 (file)
index 0000000..1ff8329
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/206-nxp-74hc153-gpio-chip-driver.patch
@@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -411,4 +411,12 @@ config GPIO_JANZ_TTL
+         This driver provides support for driving the pins in output
+         mode only. Input mode is not supported.
+ 
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++      tristate "NXP 74HC153 Dual 4-input multiplexer"
++      help
++        Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++        provides a GPIO interface supporting inputs.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_GPIO_MAX7301)   += max7301.o
+ obj-$(CONFIG_GPIO_MAX732X)    += max732x.o
+ obj-$(CONFIG_GPIO_MC33880)    += mc33880.o
+ obj-$(CONFIG_GPIO_MCP23S08)   += mcp23s08.o
++obj-$(CONFIG_GPIO_NXP_74HC153)        += nxp_74hc153.o
+ obj-$(CONFIG_GPIO_74X164)     += 74x164.o
+ obj-$(CONFIG_GPIO_PCA953X)    += pca953x.o
+ obj-$(CONFIG_GPIO_PCF857X)    += pcf857x.o

diff --git a/target/linux/ar71xx/patches-2.6.38/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.38/207-rb750-led-driver.patch
new file mode 100644 (file)
index 0000000..34ec66d
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/207-rb750-led-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -384,6 +384,10 @@ config LEDS_WNDR3700_USB
+         This option enables support for the USB LED found on the
+         NETGEAR WNDR3700 board.
+ 
++config LEDS_RB750
++      tristate "LED driver for the Mikrotik RouterBOARD 750"
++      depends on LEDS_CLASS && AR71XX_MACH_RB750
++
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593)            += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520)            += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)      += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)            += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750)              += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2)                        += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)            += leds-netxbig.o
+ 

diff --git a/target/linux/ar71xx/patches-2.6.38/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.38/208-rb750-nand-driver.patch
new file mode 100644 (file)
index 0000000..630a6cb
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/208-rb750-nand-driver.patch
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -537,4 +537,8 @@ config MTD_NAND_RB4XX
+       tristate "NAND flash driver for RouterBoard 4xx series"
+       depends on MTD_NAND && AR71XX_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++      tristate "NAND flash driver for the RouterBoard 750"
++      depends on MTD_NAND && AR71XX_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)                += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)          += rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o

diff --git a/target/linux/ar71xx/patches-2.6.38/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.38/300-mips_fw_myloader.patch
new file mode 100644 (file)
index 0000000..43f96a3
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/300-mips_fw_myloader.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -181,6 +181,7 @@ endif
+ #
+ libs-$(CONFIG_ARC)            += arch/mips/fw/arc/
+ libs-$(CONFIG_CFE)            += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)               += arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM)                += arch/mips/fw/sni/
+ libs-y                                += arch/mips/fw/lib/
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -925,6 +925,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+       bool
+ 
++config MYLOADER
++      bool
++
+ config SYNC_R4K
+       bool
+ 

diff --git a/target/linux/ar71xx/patches-2.6.38/400-2.6.35-fix-nand_scan_ident-options.patch b/target/linux/ar71xx/patches-2.6.38/400-2.6.35-fix-nand_scan_ident-options.patch
new file mode 100644 (file)
index 0000000..0b36217
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/400-2.6.35-fix-nand_scan_ident-options.patch
@@ -0,0 +1,22 @@
+--- a/drivers/mtd/nand/rb4xx_nand.c
++++ b/drivers/mtd/nand/rb4xx_nand.c
+@@ -223,7 +223,7 @@ static int __init rb4xx_nand_probe(struc
+ 
+       platform_set_drvdata(pdev, info);
+ 
+-      ret = nand_scan_ident(&info->mtd, 1);
++      ret = nand_scan_ident(&info->mtd, 1, NULL);
+       if (ret) {
+               ret = -ENXIO;
+               goto err_free_info;
+--- a/drivers/mtd/nand/rb750_nand.c
++++ b/drivers/mtd/nand/rb750_nand.c
+@@ -287,7 +287,7 @@ static int __init rb750_nand_probe(struc
+ 
+       platform_set_drvdata(pdev, info);
+ 
+-      ret = nand_scan_ident(&info->mtd, 1);
++      ret = nand_scan_ident(&info->mtd, 1, NULL);
+       if (ret) {
+               ret = -ENXIO;
+               goto err_free_info;

diff --git a/target/linux/ar71xx/patches-2.6.38/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.38/901-get_c0_compare_irq_function.patch
new file mode 100644 (file)
index 0000000..38d997e
--- /dev/null
+++ b/target/linux/ar71xx/patches-2.6.38/901-get_c0_compare_irq_function.patch
@@ -0,0 +1,29 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -54,6 +54,7 @@
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
+ #include <asm/uasm.h>
++#include <asm/time.h>
+ 
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1578,6 +1579,8 @@ void __cpuinit per_cpu_trap_init(void)
+       if (cpu_has_mips_r2) {
+               cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+               cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
++              if (get_c0_compare_irq)
++                      cp0_compare_irq = get_c0_compare_irq();
+               cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+               if (cp0_perfcount_irq == cp0_compare_irq)
+                       cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
+  */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
+