ar71xx: remove 2.6.37 support as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/config-2.6.37 b/target/linux/ar71xx/config-2.6.37
deleted file mode 100644 (file)
index f7a27f0..0000000
--- a/target/linux/ar71xx/config-2.6.37
+++ /dev/null
@@ -1,204 +0,0 @@
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-CONFIG_AR71XX_DEV_AP91_PCI=y
-CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR9XXX_WMAC=y
-CONFIG_AR71XX_DEV_DB120_PCI=y
-CONFIG_AR71XX_DEV_DSA=y
-CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
-CONFIG_AR71XX_DEV_LEDS_GPIO=y
-CONFIG_AR71XX_DEV_M25P80=y
-CONFIG_AR71XX_DEV_PB42_PCI=y
-CONFIG_AR71XX_DEV_PB9X_PCI=y
-CONFIG_AR71XX_DEV_USB=y
-CONFIG_AR71XX_MACH_AP121=y
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AP96=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DB120=y
-CONFIG_AR71XX_MACH_DIR_600_A1=y
-CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_EAP7660D=y
-CONFIG_AR71XX_MACH_JA76PF=y
-CONFIG_AR71XX_MACH_JWAP003=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_NBG460N=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_PB92=y
-CONFIG_AR71XX_MACH_RB4XX=y
-CONFIG_AR71XX_MACH_RB750=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_MR3X20=y
-CONFIG_AR71XX_MACH_TL_WA901ND=y
-CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR841N_V1=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_MACH_WZR_HP_AG300H=y
-CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
-CONFIG_AR71XX_MACH_ZCN_1523H=y
-CONFIG_AR71XX_NVRAM=y
-CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
-CONFIG_AR71XX_WDT=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_AUTO_IRQ_AFFINITY is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_GENERIC_PENDING_IRQ is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HARDIRQS_SW_RESEND is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-# CONFIG_HAVE_SPARSE_IRQ is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-# CONFIG_IRQ_PER_CPU is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_RB750 is not set
-# CONFIG_LEDS_WNDR3700_USB is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR913X=y
-CONFIG_SOC_AR933X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0

diff --git a/target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch
deleted file mode 100644 (file)
index 0adb218..0000000
--- a/target/linux/ar71xx/patches-2.6.37/001-ar71xx_core.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -161,6 +161,13 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W
- endif
- cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
- 
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX)       += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
-+
- cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)        += $(call cc-option,-mfix-r4000,)
- cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)        += $(call cc-option,-mfix-r4400,)
- cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)        += $(call cc-option,-mno-daddi,)
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -65,6 +65,23 @@ config AR7
-         Support for the Texas Instruments AR7 System-on-a-Chip
-         family: TNETD7100, 7200 and 7300.
- 
-+config ATHEROS_AR71XX
-+      bool "Atheros AR71xx based boards"
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select DMA_NONCOHERENT
-+      select HW_HAS_PCI
-+      select IRQ_CPU
-+      select ARCH_REQUIRE_GPIOLIB
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_HAS_EARLY_PRINTK
-+      select MIPS_MACHINE
-+      help
-+        Support for Atheros AR71xx based boards.
-+
- config BCM47XX
-       bool "Broadcom BCM47XX based boards"
-       select CEVT_R4K
-@@ -717,6 +734,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
- endchoice
- 
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
- source "arch/mips/jz4740/Kconfig"

diff --git a/target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch
deleted file mode 100644 (file)
index 3facce9..0000000
--- a/target/linux/ar71xx/patches-2.6.37/002-ar71xx_pci.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927)     += ops-tx4927.o
- obj-$(CONFIG_BCM47XX)         += pci-bcm47xx.o
- obj-$(CONFIG_BCM63XX)         += pci-bcm63xx.o fixup-bcm63xx.o \
-                                       ops-bcm63xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX)  += pci-ar71xx.o pci-ar724x.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.

diff --git a/target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch
deleted file mode 100644 (file)
index be2e545..0000000
--- a/target/linux/ar71xx/patches-2.6.37/003-ar71xx_usb_host.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -118,6 +118,13 @@ config XPS_USB_HCD_XILINX
- config USB_FSL_MPH_DR_OF
-       tristate
- 
-+config USB_EHCI_AR71XX
-+      bool "USB EHCI support for AR71xx"
-+      depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+      default y
-+      help
-+        Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
-       bool "Support for Freescale on-chip EHCI USB controller"
-       depends on USB_EHCI_HCD && FSL_SOC
-@@ -232,6 +239,13 @@ config USB_OHCI_HCD_OMAP3
-         Enables support for the on-chip OHCI controller on
-         OMAP3 and later chips.
- 
-+config USB_OHCI_AR71XX
-+      bool "USB OHCI support for Atheros AR71xx"
-+      depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+      default y
-+      help
-+        Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
-       bool "OHCI support for on-chip PPC USB controller"
-       depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1229,6 +1229,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER               ehci_octeon_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER               ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1111,6 +1111,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER               ohci_octeon_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER               ohci_hcd_ar71xx_driver
-+#endif
-+
- #if   !defined(PCI_DRIVER) &&         \
-       !defined(PLATFORM_DRIVER) &&    \
-       !defined(OMAP1_PLATFORM_DRIVER) &&      \

diff --git a/target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch
deleted file mode 100644 (file)
index 9802f10..0000000
--- a/target/linux/ar71xx/patches-2.6.37/004-ar71xx_spi_controller.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AR71XX
-+      tristate "Atheros AR71xx SPI Controller"
-+      depends on SPI_MASTER && ATHEROS_AR71XX
-+      select SPI_BITBANG
-+      help
-+        This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
-       tristate "Atmel SPI Controller"
-       depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
- obj-$(CONFIG_SPI_MASTER)              += spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX)              += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)                       += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)                        += spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG)             += spi_bitbang.o

diff --git a/target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch
deleted file mode 100644 (file)
index 909f2ed..0000000
--- a/target/linux/ar71xx/patches-2.6.37/005-ar71xx_mac_driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2068,6 +2068,8 @@ config ACENIC_OMIT_TIGON_I
- 
-         The safe and default value for this is N.
- 
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
-       tristate "DL2000/TC902x-based Gigabit Ethernet support"
-       depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -112,6 +112,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
- # end link order section
- #
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o

diff --git a/target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch
deleted file mode 100644 (file)
index 5f5c498..0000000
--- a/target/linux/ar71xx/patches-2.6.37/006-ar71xx_wdt_driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -930,6 +930,13 @@ config BCM63XX_WDT
-         To compile this driver as a loadable module, choose M here.
-         The module will be called bcm63xx_wdt.
- 
-+config AR71XX_WDT
-+      tristate "Atheros AR71xx Watchdog Timer"
-+      depends on ATHEROS_AR71XX
-+      help
-+        Hardware driver for the built-in watchdog timer on the Atheros
-+        AR71xx SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -115,6 +115,7 @@ obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o

diff --git a/target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch
deleted file mode 100644 (file)
index 1bb504c..0000000
--- a/target/linux/ar71xx/patches-2.6.37/007-ar91xx_flash_driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -260,6 +260,13 @@ config MTD_BCM963XX
-         Support for parsing CFE image tag and creating MTD partitions on
-         Broadcom BCM63xx boards.
- 
-+config MTD_AR91XX_FLASH
-+      tristate "Atheros AR91xx parallel flash support"
-+      depends on ATHEROS_AR71XX
-+      select MTD_COMPLEX_MAPPINGS
-+      help
-+        Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
-       tristate "CFI Flash device mapped on DIL/Net PC"
-       depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2)               += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH)        += ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o

diff --git a/target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch
deleted file mode 100644 (file)
index 5f7840f..0000000
--- a/target/linux/ar71xx/patches-2.6.37/101-ksz8041_phy_driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -118,6 +118,11 @@ config RTL8306_PHY
-       tristate "Driver for Realtek RTL8306S switches"
-       select SWCONFIG
- 
-+config MICREL_PHY
-+      tristate "Drivers for Micrel/Kendin PHYs"
-+      ---help---
-+        Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
-       bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
-       depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI)    += rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY)    += rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY)   += rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
-+obj-$(CONFIG_MICREL_PHY)      += micrel.o
- obj-$(CONFIG_FIXED_PHY)               += fixed.o
- obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO)               += mdio-gpio.o

diff --git a/target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch
deleted file mode 100644 (file)
index dcf7a6d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/102-mtd_m25p80_add_myloader_parser.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -933,6 +933,16 @@ static int __devinit m25p_probe(struct s
-                                       part_probes, &parts, 0);
-               }
- 
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+              if (nr_parts <= 0) {
-+                      static const char *part_probes[]
-+                                      = { "MyLoader", NULL, };
-+
-+                      nr_parts = parse_mtd_partitions(&flash->mtd,
-+                                      part_probes, &parts, 0);
-+              }
-+#endif
-+
-               if (nr_parts <= 0 && data && data->parts) {
-                       parts = data->parts;
-                       nr_parts = data->nr_parts;

diff --git a/target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch
deleted file mode 100644 (file)
index bb0ff7d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/104-mtd_m25p80_add_redboot_parser.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -943,6 +943,15 @@ static int __devinit m25p_probe(struct s
-               }
- #endif
- 
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+              if (nr_parts <= 0) {
-+                      static const char *part_probes[]
-+                                      = { "RedBoot", NULL, };
-+
-+                      nr_parts = parse_mtd_partitions(&flash->mtd,
-+                                      part_probes, &parts, 0);
-+              }
-+#endif
-               if (nr_parts <= 0 && data && data->parts) {
-                       parts = data->parts;
-                       nr_parts = data->nr_parts;

diff --git a/target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch
deleted file mode 100644 (file)
index 0c3814c..0000000
--- a/target/linux/ar71xx/patches-2.6.37/107-mtd-SST39VF6401B-support.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -149,6 +149,7 @@
- #define SST39LF160    0x2782
- #define SST39VF1601   0x234b
- #define SST39VF3201   0x235b
-+#define SST39VF6401B  0x236d
- #define SST39WF1601   0x274b
- #define SST39WF1602   0x274a
- #define SST39LF512    0x00D4
-@@ -1582,6 +1583,18 @@ static const struct amd_flash_info jedec
-                       ERASEINFO(0x10000,64),
-               }
-       }, {
-+              .mfr_id         = CFI_MFR_SST,
-+              .dev_id         = SST39VF6401B,
-+              .name           = "SST 39VF6401B",
-+              .devtypes       = CFI_DEVICETYPE_X16,
-+              .uaddr          = MTD_UADDR_0xAAAA_0x5555,
-+              .dev_size       = SIZE_8MiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x10000,128)
-+              }
-+      }, {
-               .mfr_id         = CFI_MFR_ST,
-               .dev_id         = M29F800AB,
-               .name           = "ST M29F800AB",

diff --git a/target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch
deleted file mode 100644 (file)
index e8e1ec0..0000000
--- a/target/linux/ar71xx/patches-2.6.37/108-mtd_fix_cfi_cmdset_0002_status_check.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1228,8 +1228,8 @@ static int __xipram do_write_oneword(str
-                       break;
-               }
- 
--              if (chip_ready(map, adr))
--                      break;
-+              if (chip_good(map, adr, datum))
-+                      goto enable_xip;
- 
-               /* Latency issues. Drop the lock, wait a while and retry */
-               UDELAY(map, chip, adr, 1);
-@@ -1245,6 +1245,8 @@ static int __xipram do_write_oneword(str
- 
-               ret = -EIO;
-       }
-+
-+ enable_xip:
-       xip_enable(map, chip, adr);
-  op_done:
-       chip->state = FL_READY;
-@@ -1576,7 +1578,6 @@ static int cfi_amdstd_write_buffers(stru
-       return 0;
- }
- 
--
- /*
-  * Handle devices with one erase region, that only implement
-  * the chip erase command.
-@@ -1640,8 +1641,8 @@ static int __xipram do_erase_chip(struct
-                       chip->erase_suspended = 0;
-               }
- 
--              if (chip_ready(map, adr))
--                      break;
-+              if (chip_good(map, adr, map_word_ff(map)))
-+                      goto op_done;
- 
-               if (time_after(jiffies, timeo)) {
-                       printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1661,6 +1662,7 @@ static int __xipram do_erase_chip(struct
-               ret = -EIO;
-       }
- 
-+ op_done:
-       chip->state = FL_READY;
-       xip_enable(map, chip, adr);
-       put_chip(map, chip, adr);
-@@ -1728,9 +1730,9 @@ static int __xipram do_erase_oneblock(st
-                       chip->erase_suspended = 0;
-               }
- 
--              if (chip_ready(map, adr)) {
-+              if (chip_good(map, adr, map_word_ff(map))) {
-                       xip_enable(map, chip, adr);
--                      break;
-+                      goto op_done;
-               }
- 
-               if (time_after(jiffies, timeo)) {
-@@ -1752,6 +1754,7 @@ static int __xipram do_erase_oneblock(st
-               ret = -EIO;
-       }
- 
-+ op_done:
-       chip->state = FL_READY;
-       put_chip(map, chip, adr);
-       mutex_unlock(&chip->mutex);

diff --git a/target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch
deleted file mode 100644 (file)
index c8012f5..0000000
--- a/target/linux/ar71xx/patches-2.6.37/109-mtd-wrt160nl-trx-parser.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -952,6 +952,16 @@ static int __devinit m25p_probe(struct s
-                                       part_probes, &parts, 0);
-               }
- #endif
-+
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+              if (nr_parts <= 0) {
-+                      static const char *part_probes[]
-+                                      = { "wrt160nl", NULL, };
-+
-+                      nr_parts = parse_mtd_partitions(&flash->mtd,
-+                                      part_probes, &parts, 0);
-+              }
-+#endif
-               if (nr_parts <= 0 && data && data->parts) {
-                       parts = data->parts;
-                       nr_parts = data->nr_parts;
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
-       ---help---
-         TI AR7 partitioning support
- 
-+config MTD_WRT160NL_PARTS
-+      tristate "Linksys WRT160NL partitioning support"
-+      depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+      ---help---
-+         Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
-       tristate "MyLoader partition parsing"
-       depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)   += ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 

diff --git a/target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
deleted file mode 100644 (file)
index 905206d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/110-usb-ehci-add-war-for-synopsys-hc-bug.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1193,6 +1193,9 @@ static void end_unlink_async (struct ehc
-               ehci->reclaim = NULL;
-               start_unlink_async (ehci, next);
-       }
-+
-+      if (ehci->has_synopsys_hc_bug)
-+              writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
- 
- /* makes sure the async qh will become idle */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -134,6 +134,7 @@ struct ehci_hcd {                  /* one per controlle
-       unsigned                amd_l1_fix:1;
-       unsigned                fs_i_thresh:1;  /* Intel iso scheduling */
-       unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
-+      unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
- 
-       /* required for usb32 quirk */
-       #define OHCI_CTRL_HCFS          (3 << 6)

diff --git a/target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644 (file)
index a972f8f..0000000
--- a/target/linux/ar71xx/patches-2.6.37/111-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,7 +39,7 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
- #define MAX_WORD_RETRIES 3
- 
-@@ -50,7 +50,9 @@
- 
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
- 
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
- {
-       struct map_info *map = mtd->priv;
-@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
-               mtd->write = cfi_amdstd_write_buffers;
-       }
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-@@ -1388,6 +1392,7 @@ static int cfi_amdstd_write_words(struct
- /*
-  * FIXME: interleaved mode not tested, and probably not supported!
-  */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
-                                   unsigned long adr, const u_char *buf,
-                                   int len)
-@@ -1498,7 +1503,6 @@ static int __xipram do_write_buffer(stru
-       return ret;
- }
- 
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
-                                   size_t *retlen, const u_char *buf)
- {
-@@ -1577,6 +1581,7 @@ static int cfi_amdstd_write_buffers(stru
- 
-       return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
- 
- /*
-  * Handle devices with one erase region, that only implement

diff --git a/target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch
deleted file mode 100644 (file)
index 3e3902b..0000000
--- a/target/linux/ar71xx/patches-2.6.37/120-dsa-trailer-tag-validation-fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
- 
-       trailer = skb_tail_pointer(skb) - 4;
-       if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
--          (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+          (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
-               goto out_drop;
- 
-       source_port = trailer[1] & 7;

diff --git a/target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch
deleted file mode 100644 (file)
index 1a11a69..0000000
--- a/target/linux/ar71xx/patches-2.6.37/121-dsa-add-88e6063-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
-         This enables support for the Marvell 88E6060 ethernet switch
-         chip.
- 
-+config NET_DSA_MV88E6063
-+      bool "Marvell 88E6063 ethernet switch chip support"
-+      select NET_DSA_TAG_TRAILER
-+      ---help---
-+        This enables support for the Marvell 88E6063 ethernet switch
-+        chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
-       bool
-       default n
---- a/net/dsa/Makefile
-+++ b/net/dsa/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
- # switch drivers
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
- obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
- 

diff --git a/target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch
deleted file mode 100644 (file)
index a09271a..0000000
--- a/target/linux/ar71xx/patches-2.6.37/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru
-       static char nullstring[] = "unallocated";
- #endif
- 
-+      buf = vmalloc(master->erasesize);
-+      if (!buf)
-+              return -ENOMEM;
-+
-+ restart:
-       if ( directory < 0 ) {
-               offset = master->size + directory * master->erasesize;
--              while (master->block_isbad && 
-+              while (master->block_isbad &&
-                      master->block_isbad(master, offset)) {
-                       if (!offset) {
-                       nogood:
-                               printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+                              vfree(buf);
-                               return -EIO;
-                       }
-                       offset -= master->erasesize;
-               }
-       } else {
-               offset = directory * master->erasesize;
--              while (master->block_isbad && 
-+              while (master->block_isbad &&
-                      master->block_isbad(master, offset)) {
-                       offset += master->erasesize;
-                       if (offset == master->size)
-                               goto nogood;
-               }
-       }
--      buf = vmalloc(master->erasesize);
--
--      if (!buf)
--              return -ENOMEM;
--
-       printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
-              master->name, offset);
- 
-@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru
-       }
-       if (i == numslots) {
-               /* Didn't find it */
-+              if (offset + master->erasesize < master->size) {
-+                      /* not at the end of the flash yet, maybe next block :) */
-+                      directory++;
-+                      goto restart;
-+              }
-               printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
-                      master->name);
-               ret = 0;

diff --git a/target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch
deleted file mode 100644 (file)
index 1d9bf9e..0000000
--- a/target/linux/ar71xx/patches-2.6.37/150-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -46,8 +46,8 @@ obj-y                                += macintosh/
- obj-$(CONFIG_IDE)             += ide/
- obj-$(CONFIG_SCSI)            += scsi/
- obj-$(CONFIG_ATA)             += ata/
--obj-$(CONFIG_MTD)             += mtd/
- obj-$(CONFIG_SPI)             += spi/
-+obj-$(CONFIG_MTD)             += mtd/
- obj-y                         += net/
- obj-$(CONFIG_ATM)             += atm/
- obj-$(CONFIG_FUSION)          += message/

diff --git a/target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch
deleted file mode 100644 (file)
index b51f68f..0000000
--- a/target/linux/ar71xx/patches-2.6.37/151-spi-add-various-flags.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -441,6 +441,8 @@ struct spi_transfer {
-       dma_addr_t      rx_dma;
- 
-       unsigned        cs_change:1;
-+      unsigned        verify:1;
-+      unsigned        fast_write:1;
-       u8              bits_per_word;
-       u16             delay_usecs;
-       u32             speed_hz;
-@@ -482,6 +484,7 @@ struct spi_message {
-       struct spi_device       *spi;
- 
-       unsigned                is_dma_mapped:1;
-+      unsigned                fast_read:1;
- 
-       /* REVISIT:  we might want a flag affecting the behavior of the
-        * last transfer ... allowing things like "read 16 bit length L"

diff --git a/target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch
deleted file mode 100644 (file)
index 382cc38..0000000
--- a/target/linux/ar71xx/patches-2.6.37/152-rb4xx-spi-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -290,6 +290,12 @@ config SPI_PXA2XX
-         The driver can be configured to use any SSP port and additional
-         documentation can be found a Documentation/spi/pxa2xx.
- 
-+config SPI_RB4XX
-+      tristate "Mikrotik RB4XX SPI master"
-+      depends on SPI_MASTER && AR71XX_MACH_RB4XX
-+      help
-+        SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
-       tristate "Samsung S3C24XX series SPI"
-       depends on ARCH_S3C2410 && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_SH_SCI)             += spi_sh_sci.
- obj-$(CONFIG_SPI_SH_MSIOF)            += spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX)            += spi_stmp.o
- obj-$(CONFIG_SPI_NUC900)              += spi_nuc900.o
-+obj-$(CONFIG_SPI_RB4XX)                       += rb4xx_spi.o
- 
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y                      := spi_s3c24xx.o

diff --git a/target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch
deleted file mode 100644 (file)
index 0f6b861..0000000
--- a/target/linux/ar71xx/patches-2.6.37/153-spi-rb4xx-cpld-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -446,6 +446,13 @@ config SPI_TLE62X0
-         sysfs interface, with each line presented as a kind of GPIO
-         exposing both switch control and diagnostic feedback.
- 
-+config SPI_RB4XX_CPLD
-+      tristate "MikroTik RB4XX CPLD driver"
-+      depends on AR71XX_MACH_RB4XX
-+      help
-+        SPI driver for the Xilinx CPLD chip present on the
-+        MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -60,6 +60,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- #     ... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
-+obj-$(CONFIG_SPI_RB4XX_CPLD)  += spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)      += spidev.o
- obj-$(CONFIG_SPI_TLE62X0)     += tle62x0.o
- #     ... add above this line ...

diff --git a/target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch
deleted file mode 100644 (file)
index e7cd9bd..0000000
--- a/target/linux/ar71xx/patches-2.6.37/200-rb4xx_nand_driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -532,4 +532,8 @@ config MTD_NAND_FSMC
-         Enables support for NAND Flash chips on the ST Microelectronics
-         Flexible Static Memory Controller (FSMC)
- 
-+config MTD_NAND_RB4XX
-+      tristate "NAND flash driver for RouterBoard 4xx series"
-+      depends on MTD_NAND && AR71XX_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)               += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx)         += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o

diff --git a/target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch
deleted file mode 100644 (file)
index d1b96e0..0000000
--- a/target/linux/ar71xx/patches-2.6.37/201-ap83_spi_controller.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
- obj-$(CONFIG_SPI_MASTER)              += spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83)                        += ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX)              += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)                       += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)                        += spi_bfin5xx.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AP83
-+      tristate "Atheros AP83 specific SPI Controller"
-+      depends on SPI_MASTER && AR71XX_MACH_AP83
-+      select SPI_BITBANG
-+      help
-+        This is a specific SPI controller driver for the Atheros AP83
-+        reference board.
-+
- config SPI_AR71XX
-       tristate "Atheros AR71xx SPI Controller"
-       depends on SPI_MASTER && ATHEROS_AR71XX

diff --git a/target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch
deleted file mode 100644 (file)
index 4fb7c1d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/202-spi_vsc7385_driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -461,6 +461,11 @@ config SPI_RB4XX_CPLD
-         SPI driver for the Xilinx CPLD chip present on the
-         MikroTik RB4xx boards.
- 
-+config SPI_VSC7385
-+      tristate "Vitesse VSC7385 ethernet switch driver"
-+      help
-+        SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -63,6 +63,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ)
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_RB4XX_CPLD)  += spi_rb4xx_cpld.o
- obj-$(CONFIG_SPI_SPIDEV)      += spidev.o
-+obj-$(CONFIG_SPI_VSC7385)     += spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0)     += tle62x0.o
- #     ... add above this line ...
- 

diff --git a/target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch
deleted file mode 100644 (file)
index 9973874..0000000
--- a/target/linux/ar71xx/patches-2.6.37/203-pb44_spi_controller.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
-       help
-         This is the SPI contoller driver for Atheros AR71xx.
- 
-+config SPI_PB44
-+      tristate "Atheros PB44 board specific SPI controller"
-+      depends on SPI_MASTER && AR71XX_MACH_PB44
-+      select SPI_BITBANG
-+      help
-+        This is a specific SPI controller driver for the Atheros PB44
-+        reference board.
-+
- config SPI_ATMEL
-       tristate "Atmel SPI Controller"
-       depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_GPIO)                       += spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD)            += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX)                 += spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP)            += spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44)                        += pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX)              += pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)          += omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX)            += omap2_mcspi.o

diff --git a/target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch
deleted file mode 100644 (file)
index 9fb5ffa..0000000
--- a/target/linux/ar71xx/patches-2.6.37/205-wndr3700-usb-led-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -377,6 +377,13 @@ config LEDS_TRIGGERS
-         These triggers allow kernel events to drive the LEDs and can
-         be configured via sysfs. If unsure, say Y.
- 
-+config LEDS_WNDR3700_USB
-+      tristate "NETGEAR WNDR3700 USB LED driver"
-+      depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
-+      help
-+        This option enables support for the USB LED found on the
-+        NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGER_TIMER
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X)            += leds-da903
- obj-$(CONFIG_LEDS_WM831X_STATUS)      += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM)                        += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB}               += leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR)          += leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200)               += leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593)             += leds-lt3593.o

diff --git a/target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch
deleted file mode 100644 (file)
index 394996e..0000000
--- a/target/linux/ar71xx/patches-2.6.37/206-nxp-74hc153-gpio-chip-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -401,4 +401,12 @@ config GPIO_JANZ_TTL
-         This driver provides support for driving the pins in output
-         mode only. Input mode is not supported.
- 
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+      tristate "NXP 74HC153 Dual 4-input multiplexer"
-+      help
-+        Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+        provides a GPIO interface supporting inputs.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_GPIO_MAX7301)   += max7301.o
- obj-$(CONFIG_GPIO_MAX732X)    += max732x.o
- obj-$(CONFIG_GPIO_MC33880)    += mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08)   += mcp23s08.o
-+obj-$(CONFIG_GPIO_NXP_74HC153)        += nxp_74hc153.o
- obj-$(CONFIG_GPIO_74X164)     += 74x164.o
- obj-$(CONFIG_GPIO_PCA953X)    += pca953x.o
- obj-$(CONFIG_GPIO_PCF857X)    += pcf857x.o

diff --git a/target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch
deleted file mode 100644 (file)
index 34ec66d..0000000
--- a/target/linux/ar71xx/patches-2.6.37/207-rb750-led-driver.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -384,6 +384,10 @@ config LEDS_WNDR3700_USB
-         This option enables support for the USB LED found on the
-         NETGEAR WNDR3700 board.
- 
-+config LEDS_RB750
-+      tristate "LED driver for the Mikrotik RouterBOARD 750"
-+      depends on LEDS_CLASS && AR71XX_MACH_RB750
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGER_TIMER
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593)            += leds-lt359
- obj-$(CONFIG_LEDS_ADP5520)            += leds-adp5520.o
- obj-$(CONFIG_LEDS_DELL_NETBOOKS)      += dell-led.o
- obj-$(CONFIG_LEDS_MC13783)            += leds-mc13783.o
-+obj-$(CONFIG_LEDS_RB750)              += leds-rb750.o
- obj-$(CONFIG_LEDS_NS2)                        += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG)            += leds-netxbig.o
- 

diff --git a/target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch
deleted file mode 100644 (file)
index 0d1ed3c..0000000
--- a/target/linux/ar71xx/patches-2.6.37/208-rb750-nand-driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -536,4 +536,8 @@ config MTD_NAND_RB4XX
-       tristate "NAND flash driver for RouterBoard 4xx series"
-       depends on MTD_NAND && AR71XX_MACH_RB4XX
- 
-+config MTD_NAND_RB750
-+      tristate "NAND flash driver for the RouterBoard 750"
-+      depends on MTD_NAND && AR71XX_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)                += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750)          += rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA)              += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o

diff --git a/target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch
deleted file mode 100644 (file)
index aaefb71..0000000
--- a/target/linux/ar71xx/patches-2.6.37/300-mips_fw_myloader.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -184,6 +184,7 @@ endif
- #
- libs-$(CONFIG_ARC)            += arch/mips/fw/arc/
- libs-$(CONFIG_CFE)            += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER)               += arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM)                += arch/mips/fw/sni/
- libs-y                                += arch/mips/fw/lib/
- 
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -909,6 +909,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
-       bool
- 
-+config MYLOADER
-+      bool
-+
- config SYNC_R4K
-       bool
- 

diff --git a/target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch b/target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch
deleted file mode 100644 (file)
index 0b36217..0000000
--- a/target/linux/ar71xx/patches-2.6.37/400-2.6.35-fix-nand_scan_ident-options.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/mtd/nand/rb4xx_nand.c
-+++ b/drivers/mtd/nand/rb4xx_nand.c
-@@ -223,7 +223,7 @@ static int __init rb4xx_nand_probe(struc
- 
-       platform_set_drvdata(pdev, info);
- 
--      ret = nand_scan_ident(&info->mtd, 1);
-+      ret = nand_scan_ident(&info->mtd, 1, NULL);
-       if (ret) {
-               ret = -ENXIO;
-               goto err_free_info;
---- a/drivers/mtd/nand/rb750_nand.c
-+++ b/drivers/mtd/nand/rb750_nand.c
-@@ -287,7 +287,7 @@ static int __init rb750_nand_probe(struc
- 
-       platform_set_drvdata(pdev, info);
- 
--      ret = nand_scan_ident(&info->mtd, 1);
-+      ret = nand_scan_ident(&info->mtd, 1, NULL);
-       if (ret) {
-               ret = -ENXIO;
-               goto err_free_info;

diff --git a/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch b/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch
deleted file mode 100644 (file)
index 04da7ad..0000000
--- a/target/linux/ar71xx/patches-2.6.37/500-ar933x-uart-driver.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-commit 24920fbc58c0183013db148f8be6fbc12d3bba9a
-Author: Gabor Juhos <juhosg@openwrt.org>
-Date:   Sun Mar 27 12:04:36 2011 +0200
-
-    serial: add driver for the built-in UART of the AR933X SoC
-    
-    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1632,4 +1632,27 @@ config SERIAL_ALTERA_UART_CONSOLE
-       help
-         Enable a Altera UART port to be the system console.
- 
-+config SERIAL_AR933X
-+      bool "AR933X serial port support"
-+      depends on SOC_AR933X
-+      select SERIAL_CORE
-+      help
-+        If you have an Atheros AR933X SOC based board and want to use the
-+        built-in UART of the SoC, say Y to this option.
-+
-+config SERIAL_AR933X_CONSOLE
-+      bool "Console on AR933X serial port"
-+      depends on SERIAL_AR933X=y
-+      select SERIAL_CORE_CONSOLE
-+      help
-+        Enable a built-in UART port of the AR933X to be the system console.
-+
-+config SERIAL_AR933X_NR_UARTS
-+      int "Maximum number of AR933X serial ports"
-+      depends on SERIAL_AR933X
-+      default "2"
-+      help
-+        Set this to the number of serial ports you want the driver
-+        to support.
-+
- endmenu
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -89,3 +89,5 @@ obj-$(CONFIG_SERIAL_ALTERA_UART) += alte
- obj-$(CONFIG_SERIAL_MRST_MAX3110)     += mrst_max3110.o
- obj-$(CONFIG_SERIAL_MFD_HSU)  += mfd.o
- obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
-+obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
-+
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -199,6 +199,9 @@
- /* TI OMAP-UART */
- #define PORT_OMAP     96
- 
-+/* Atheros AR933X SoC */
-+#define PORT_AR933X   98
-+
- #ifdef __KERNEL__
- 
- #include <linux/compiler.h>

diff --git a/target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch
deleted file mode 100644 (file)
index 38d997e..0000000
--- a/target/linux/ar71xx/patches-2.6.37/901-get_c0_compare_irq_function.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -54,6 +54,7 @@
- #include <asm/types.h>
- #include <asm/stacktrace.h>
- #include <asm/uasm.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1578,6 +1579,8 @@ void __cpuinit per_cpu_trap_init(void)
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
-               cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+              if (get_c0_compare_irq)
-+                      cp0_compare_irq = get_c0_compare_irq();
-               cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
-  */
- #ifdef CONFIG_CEVT_R4K_LIB
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- extern int r4k_clockevent_init(void);
- #endif
-