[uboot-lantiq] cleanup configuration handling

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20628 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/package/uboot-lantiq/Config.in b/package/uboot-lantiq/Config.in
index 7544e71..e2c156d 100644 (file)
--- a/package/uboot-lantiq/Config.in
+++ b/package/uboot-lantiq/Config.in
@@ -1,32 +1,35 @@
-config UBOOT_CONFIG
-   string "configuration file"
-   default "easy50712_DDR166M"
-   help
-     The configuration reflects the settings for a dedicated board hardware.
-     Select for Danube evaluation board easy50712_DDR166M .
-     Select for AR9 evaluation board easy50812_DDR166M .
-
-config UBOOT_DDR_CONFIG
-   string "DDR configuration file"
-   default "danube_ref_ddr166.conf"
-   depends on UBOOT_RAMBOOT
-   help
-     The DDR configuration file should reflect the DDR memory device configuration .
-     It will be used to create a RAM boot image
-     Select for Danube evalution board danube_ref_ddr166.conf .
-     Select for AR9 evalution board easy50812.conf .
+config UBOOT_TARGET
+       string "target"
+       default "easy50712_DDR166M"
+       depends on PACKAGE_uboot-lantiq
+       help
+         The configuration reflects the settings for a dedicated board hardware.
+         Select for Danube evaluation board easy50712_DDR166M .
+         Select for AR9 evaluation board easy50812_DDR166M .

 
 config UBOOT_RAMBOOT
 
 config UBOOT_RAMBOOT

-   bool "Enable RAM boot image"
-   help
-     Using the UART boot mode of the ROM code this image could be loaded to the RAM.
-     Executing the image in the RAM the functionality of the uboot image can be 
-     tested first without touching the original flash.
-     Note: Be carefull, by saving the environment the flash will be modified.
-     The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
+       bool "Enable RAM boot image"
+       depends on PACKAGE_uboot-lantiq
+       help
+         Using the UART boot mode of the ROM code this image could be loaded to the RAM.
+         While executing the image in the RAM the functionality of the uboot image can be 
+         tested first without touching the original flash.
+         Note: Be carefull, by saving the environment the flash will be modified.
+         The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
+
+config UBOOT_RAMBOOT_DDR_CONFIG
+       string "DDR configuration file"
+       default "easy50712_DDR166M.conf"
+       depends on UBOOT_RAMBOOT
+       help
+         The DDR configuration file should reflect the DDR memory device configuration .
+         It will be used to create a RAM boot image
+         Select for Danube evalution board easy50712_DDR166M.conf .
+         Select for AR9 evalution board easy50812.conf .
+

 
 

-config IFXMIPS_UBOOT_A800
+config UBOOT_A800

        bool "add ARV452 Switch bringup hack"
        bool "add ARV452 Switch bringup hack"

-       depends on PACKAGE_uboot-ifxmips
+       depends on PACKAGE_uboot-lantiq

        help
          Say Y, if you have a arv452 board (wav-281, A800, ..)
        help
          Say Y, if you have a arv452 board (wav-281, A800, ..)

diff --git a/package/uboot-lantiq/Makefile b/package/uboot-lantiq/Makefile
index 985f363..fc7c653 100644 (file)
--- a/package/uboot-lantiq/Makefile
+++ b/package/uboot-lantiq/Makefile
@@ -20,6 +20,10 @@ PKG_TARGETS:=bin
 
 include $(INCLUDE_DIR)/package.mk
 
 
 include $(INCLUDE_DIR)/package.mk
 

+ifeq ($(DUMP),)
+  STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell grep '^CONFIG_UBOOT_' $(TOPDIR)/.config | md5s)
+endif
+

 define Package/uboot-lantiq
   SECTION:=boot
   CATEGORY:=Boot Loaders
 define Package/uboot-lantiq
   SECTION:=boot
   CATEGORY:=Boot Loaders


@@ -35,8 +39,8 @@ define Build/Prepare
        find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
 endef
 
        find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
 endef
 

-UBOOT_CONFIG:=$(call qstrip,$(CONFIG_UBOOT_CONFIG))
-UBOOT_DDR_CONFIG:=$(call qstrip,$(CONFIG_UBOOT_DDR_CONFIG))
+UBOOT_TARGET:=$(call qstrip,$(CONFIG_UBOOT_TARGET))
+UBOOT_RAMBOOT_DDR_CONFIG:=$(call qstrip,$(CONFIG_UBOOT_RAMBOOT_DDR_CONFIG))

 
 UBOOT_MAKE_OPTS:= \
        CROSS_COMPILE=$(TARGET_CROSS) \
 
 UBOOT_MAKE_OPTS:= \
        CROSS_COMPILE=$(TARGET_CROSS) \


@@ -44,9 +48,7 @@ UBOOT_MAKE_OPTS:= \
        V=1
 
 define Package/uboot-lantiq/config
        V=1
 
 define Package/uboot-lantiq/config

-       menu "configuration"
-               source "$(SOURCE)/Config.in"
-       endmenu
+       source "$(SOURCE)/Config.in"

 endef
 
 define Build/Configure/Target
 endef
 
 define Build/Configure/Target


@@ -57,9 +59,9 @@ define Build/Configure/Target
 endef
 
 define Build/Configure
 endef
 
 define Build/Configure

-       $(call Build/Configure/Target,$(UBOOT_CONFIG))
+       $(call Build/Configure/Target,$(UBOOT_TARGET))

 ifeq ($(CONFIG_UBOOT_RAMBOOT),y)
 ifeq ($(CONFIG_UBOOT_RAMBOOT),y)

-       $(call Build/Configure/Target,$(UBOOT_CONFIG)_ramboot)
+       $(call Build/Configure/Target,$(UBOOT_TARGET)_ramboot)

 endif
 endef
 
 endif
 endef
 


@@ -71,24 +73,24 @@ define Build/Compile/Target
 endef
 
 define Build/Compile
 endef
 
 define Build/Compile

-       $(call Build/Compile/Target,$(UBOOT_CONFIG))
+       $(call Build/Compile/Target,$(UBOOT_TARGET))

 ifeq ($(CONFIG_UBOOT_RAMBOOT),y)
 ifeq ($(CONFIG_UBOOT_RAMBOOT),y)

-       $(call Build/Compile/Target,$(UBOOT_CONFIG)_ramboot)
+       $(call Build/Compile/Target,$(UBOOT_TARGET)_ramboot)

 endif
 endef
 
 define Package/uboot-lantiq/install
 endif
 endef
 
 define Package/uboot-lantiq/install

-       mkdir -p $(1)/$(UBOOT_CONFIG)
+       mkdir -p $(1)/$(UBOOT_TARGET)

        dd \
        dd \

-               if=$(PKG_BUILD_DIR)/$(UBOOT_CONFIG)/u-boot.bin \
-               of=$(1)/$(UBOOT_CONFIG)/u-boot.bin \
+               if=$(PKG_BUILD_DIR)/$(UBOOT_TARGET)/u-boot.bin \
+               of=$(1)/$(UBOOT_TARGET)/u-boot.bin \

                bs=64k conv=sync
 ifeq ($(CONFIG_UBOOT_RAMBOOT),y)
                bs=64k conv=sync
 ifeq ($(CONFIG_UBOOT_RAMBOOT),y)

-       if [ -e $(UBOOT_DDR_CONFIG) ]; then \
+       if [ -e $(UBOOT_RAMBOOT_DDR_CONFIG) ]; then \

                perl ./gct \
                perl ./gct \

-                       $(UBOOT_DDR_CONFIG) \
-                       $(PKG_BUILD_DIR)/$(UBOOT_CONFIG)_ramboot/u-boot.srec \
-                       $(1)/$(UBOOT_CONFIG)/u-boot.asc; \
+                       $(UBOOT_RAMBOOT_DDR_CONFIG) \
+                       $(PKG_BUILD_DIR)/$(UBOOT_TARGET)_ramboot/u-boot.srec \
+                       $(1)/$(UBOOT_TARGET)/u-boot.asc; \

        fi
 endif
 endef
        fi
 endif
 endef