-diff -urN -x CVS linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S Tue May 8 12:13:30 2007
+Index: linux-2.6.21.7/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/boot/compressed/head-at91rm9200.S
++++ linux-2.6.21.7/arch/arm/boot/compressed/head-at91rm9200.S
@@ -67,6 +67,12 @@
cmp r7, r3
beq 99f
@ Unknown board, use the AT91RM9200DK board
@ mov r7, #MACH_TYPE_AT91RM9200
mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Kconfig linux-2.6-stable/arch/arm/mach-at91/Kconfig
---- linux-2.6.21/arch/arm/mach-at91/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/Kconfig Wed May 9 10:20:54 2007
-@@ -17,6 +17,9 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Kconfig
++++ linux-2.6.21.7/arch/arm/mach-at91/Kconfig
+@@ -17,6 +17,9 @@ config ARCH_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
endchoice
# ----------------------------------------------------------
-@@ -87,6 +90,12 @@
+@@ -87,6 +90,12 @@ config MACH_KAFA
help
Select this if you are using Sperry-Sun's KAFA board.
endif
# ----------------------------------------------------------
-@@ -111,6 +120,13 @@
+@@ -111,6 +120,13 @@ config MACH_AT91SAM9260EK
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
endif
# ----------------------------------------------------------
-@@ -145,6 +161,20 @@
+@@ -145,6 +161,20 @@ endif
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
-@@ -160,6 +190,20 @@
+@@ -160,6 +190,20 @@ config MTD_NAND_AT91_BUSWIDTH_16
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
# ----------------------------------------------------------
comment "AT91 Feature Selections"
-@@ -170,6 +214,20 @@
+@@ -170,6 +214,20 @@ config AT91_PROGRAMMABLE_CLOCKS
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
endmenu
endif
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Makefile linux-2.6-stable/arch/arm/mach-at91/Makefile
---- linux-2.6.21/arch/arm/mach-at91/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/Makefile Wed May 9 12:37:19 2007
-@@ -8,12 +8,15 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.21.7/arch/arm/mach-at91/Makefile
+@@ -8,12 +8,15 @@ obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-@@ -25,9 +28,11 @@
+@@ -25,9 +28,11 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-@@ -35,9 +40,13 @@
+@@ -35,9 +40,13 @@ obj-$(CONFIG_MACH_AT91SAM9261EK) += boar
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
-@@ -45,7 +54,7 @@
+@@ -45,7 +54,7 @@ led-$(CONFIG_MACH_KAFA) += leds.o
obj-$(CONFIG_LEDS) += $(led-y)
# VGA support
ifeq ($(CONFIG_PM_DEBUG),y)
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c
---- linux-2.6.21/arch/arm/mach-at91/at91rm9200.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c Tue May 8 12:13:30 2007
-@@ -117,6 +117,21 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200.c
+@@ -117,6 +117,21 @@ static struct clk pioD_clk = {
.pmc_mask = 1 << AT91RM9200_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc0_clk = {
.name = "tc0_clk",
.pmc_mask = 1 << AT91RM9200_ID_TC0,
-@@ -161,7 +176,9 @@
+@@ -161,7 +176,9 @@ static struct clk *periph_clocks[] __ini
&udc_clk,
&twi_clk,
&spi_clk,
&tc0_clk,
&tc1_clk,
&tc2_clk,
-@@ -250,6 +267,33 @@
+@@ -250,6 +267,33 @@ static void at91rm9200_reset(void)
/* --------------------------------------------------------------------
* AT91RM9200 processor initialization
* -------------------------------------------------------------------- */
void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-@@ -271,6 +315,9 @@
+@@ -271,6 +315,9 @@ void __init at91rm9200_initialize(unsign
/* Initialize GPIO subsystem */
at91_gpio_init(at91rm9200_gpio, banks);
}
-@@ -284,28 +331,28 @@
+@@ -284,28 +331,28 @@ void __init at91rm9200_initialize(unsign
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c Tue May 8 12:13:30 2007
-@@ -480,7 +480,18 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -480,7 +480,18 @@ void __init at91_add_device_i2c(void) {}
* SPI
* -------------------------------------------------------------------- */
static u64 spi_dmamask = 0xffffffffUL;
static struct resource spi_resources[] = {
-@@ -497,7 +508,7 @@
+@@ -497,7 +508,7 @@ static struct resource spi_resources[] =
};
static struct platform_device at91rm9200_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
-@@ -606,6 +617,32 @@
+@@ -606,6 +617,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9260.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c Tue May 8 12:13:30 2007
-@@ -119,6 +119,11 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9260.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91sam9260.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9260.c
+@@ -119,6 +119,11 @@ static struct clk spi1_clk = {
.pmc_mask = 1 << AT91SAM9260_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc0_clk = {
.name = "tc0_clk",
.pmc_mask = 1 << AT91SAM9260_ID_TC0,
-@@ -193,7 +198,7 @@
+@@ -193,7 +198,7 @@ static struct clk *periph_clocks[] __ini
&twi_clk,
&spi0_clk,
&spi1_clk,
&tc0_clk,
&tc1_clk,
&tc2_clk,
-@@ -264,6 +269,33 @@
+@@ -264,6 +269,33 @@ static void at91sam9260_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
-@@ -310,6 +342,9 @@
+@@ -310,6 +342,9 @@ void __init at91sam9260_initialize(unsig
/* Register GPIO subsystem */
at91_gpio_init(at91sam9260_gpio, 3);
}
/* --------------------------------------------------------------------
-@@ -322,30 +357,30 @@
+@@ -322,30 +357,30 @@ void __init at91sam9260_initialize(unsig
static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c Tue May 8 12:13:30 2007
-@@ -527,6 +527,32 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9260_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91sam9260_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9260_devices.c
+@@ -527,6 +527,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9261.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c Tue May 8 12:13:30 2007
-@@ -97,6 +97,21 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9261.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91sam9261.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9261.c
+@@ -97,6 +97,21 @@ static struct clk spi1_clk = {
.pmc_mask = 1 << AT91SAM9261_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tc0_clk = {
.name = "tc0_clk",
.pmc_mask = 1 << AT91SAM9261_ID_TC0,
-@@ -135,7 +150,9 @@
+@@ -135,7 +150,9 @@ static struct clk *periph_clocks[] __ini
&twi_clk,
&spi0_clk,
&spi1_clk,
&tc0_clk,
&tc1_clk,
&tc2_clk,
-@@ -230,6 +247,28 @@
+@@ -230,6 +247,28 @@ static void at91sam9261_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9261 processor initialization
* -------------------------------------------------------------------- */
-@@ -250,6 +289,9 @@
+@@ -250,6 +289,9 @@ void __init at91sam9261_initialize(unsig
/* Register GPIO subsystem */
at91_gpio_init(at91sam9261_gpio, 3);
}
/* --------------------------------------------------------------------
-@@ -262,25 +304,25 @@
+@@ -262,25 +304,25 @@ void __init at91sam9261_initialize(unsig
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
- 0,
+- 0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
++ 0,
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
3, /* LCD Controller */
0,
0,
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9261_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91sam9261_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,6 +14,9 @@
#include <asm/mach/map.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
-@@ -430,9 +433,9 @@
+@@ -430,9 +433,9 @@ void __init at91_add_device_spi(struct s
* LCD Controller
* -------------------------------------------------------------------- */
static struct resource lcdc_resources[] = {
[0] = {
-@@ -455,7 +458,7 @@
+@@ -455,7 +458,7 @@ static struct resource lcdc_resources[]
};
static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
-@@ -466,7 +469,7 @@
+@@ -466,7 +469,7 @@ static struct platform_device at91_lcdc_
.num_resources = ARRAY_SIZE(lcdc_resources),
};
{
if (!data) {
return;
-@@ -499,7 +502,7 @@
+@@ -499,7 +502,7 @@ void __init at91_add_device_lcdc(struct
platform_device_register(&at91_lcdc_device);
}
#else
#endif
-@@ -525,6 +528,32 @@
+@@ -525,6 +528,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9263.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c Tue May 8 12:13:30 2007
-@@ -87,6 +87,11 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9263.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91sam9263.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9263.c
+@@ -87,6 +87,11 @@ static struct clk mmc1_clk = {
.pmc_mask = 1 << AT91SAM9263_ID_MCI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk twi_clk = {
.name = "twi_clk",
.pmc_mask = 1 << AT91SAM9263_ID_TWI,
-@@ -102,16 +107,46 @@
+@@ -102,16 +107,46 @@ static struct clk spi1_clk = {
.pmc_mask = 1 << AT91SAM9263_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udc_clk = {
.name = "udc_clk",
.pmc_mask = 1 << AT91SAM9263_ID_UDP,
-@@ -142,20 +177,21 @@
+@@ -142,20 +177,21 @@ static struct clk *periph_clocks[] __ini
&usart2_clk,
&mmc0_clk,
&mmc1_clk,
&ohci_clk,
// irq0 .. irq1
};
-@@ -237,6 +273,28 @@
+@@ -237,6 +273,28 @@ static void at91sam9263_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
* -------------------------------------------------------------------- */
-@@ -256,6 +314,9 @@
+@@ -256,6 +314,9 @@ void __init at91sam9263_initialize(unsig
/* Register GPIO subsystem */
at91_gpio_init(at91sam9263_gpio, 5);
}
/* --------------------------------------------------------------------
-@@ -268,34 +329,34 @@
+@@ -268,34 +329,34 @@ void __init at91sam9263_initialize(unsig
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
};
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c Thu May 10 12:23:46 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9263_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91sam9263_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,6 +13,9 @@
#include <asm/mach/map.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
-@@ -573,6 +576,180 @@
+@@ -573,6 +576,180 @@ void __init at91_add_device_spi(struct s
/* --------------------------------------------------------------------
* LEDs
* -------------------------------------------------------------------- */
-@@ -594,6 +771,32 @@
+@@ -594,6 +771,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c Fri May 11 15:48:14 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9rl.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9rl.c
@@ -0,0 +1,366 @@
+/*
+ * arch/arm/mach-at91/at91sam9rl.c
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c Fri May 11 16:03:25 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91sam9rl_devices.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -0,0 +1,660 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+}
+
+arch_initcall(at91_add_standard_devices);
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-cam60.c linux-2.6-stable/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.21/arch/arm/mach-at91/board-cam60.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-cam60.c Tue May 8 12:13:30 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-cam60.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/board-cam60.c
@@ -0,0 +1,148 @@
+/*
+ * KwikByte CAM60
+ .init_irq = cam60_init_irq,
+ .init_machine = cam60_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-chub.c linux-2.6-stable/arch/arm/mach-at91/board-chub.c
---- linux-2.6.21/arch/arm/mach-at91/board-chub.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-chub.c Tue May 8 12:13:30 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-chub.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/board-chub.c
@@ -0,0 +1,132 @@
+/*
+ * linux/arch/arm/mach-at91/board-chub.c
+ .init_irq = chub_init_irq,
+ .init_machine = chub_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-csb337.c linux-2.6-stable/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.21/arch/arm/mach-at91/board-csb337.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-csb337.c Tue May 8 12:13:30 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-csb337.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-csb337.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-csb337.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
-@@ -59,6 +60,7 @@
+@@ -59,6 +60,7 @@ static void __init csb337_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Setup the serial ports and console */
at91_init_serial(&csb337_uart_config);
-@@ -149,6 +151,55 @@
+@@ -149,6 +151,55 @@ static struct platform_device csb_flash
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
static void __init csb337_board_init(void)
{
/* Serial */
-@@ -168,8 +219,12 @@
+@@ -168,8 +219,12 @@ static void __init csb337_board_init(voi
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
at91_add_device_mmc(0, &csb337_mmc_data);
}
MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-dk.c linux-2.6-stable/arch/arm/mach-at91/board-dk.c
---- linux-2.6.21/arch/arm/mach-at91/board-dk.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-dk.c Tue May 8 14:29:12 2007
-@@ -73,6 +73,185 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-dk.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-dk.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-dk.c
+@@ -73,6 +73,185 @@ static void __init dk_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
-@@ -151,7 +330,7 @@
+@@ -151,7 +330,7 @@ static struct at91_nand_data __initdata
#define DK_FLASH_SIZE 0x200000
static struct physmap_flash_data dk_flash_data = {
};
static struct resource dk_flash_resource = {
-@@ -170,6 +349,13 @@
+@@ -170,6 +349,13 @@ static struct platform_device dk_flash =
.num_resources = 1,
};
static void __init dk_board_init(void)
{
-@@ -200,8 +386,10 @@
+@@ -200,8 +386,10 @@ static void __init dk_board_init(void)
at91_add_device_nand(&dk_nand_data);
/* NOR Flash */
platform_device_register(&dk_flash);
}
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-ek.c linux-2.6-stable/arch/arm/mach-at91/board-ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-ek.c Tue May 8 14:29:22 2007
-@@ -73,6 +73,187 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-ek.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-ek.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-ek.c
+@@ -73,6 +73,187 @@ static void __init ek_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
-@@ -113,7 +294,7 @@
+@@ -113,7 +294,7 @@ static struct spi_board_info ek_spi_devi
#define EK_FLASH_SIZE 0x200000
static struct physmap_flash_data ek_flash_data = {
};
static struct resource ek_flash_resource = {
-@@ -132,6 +313,18 @@
+@@ -132,6 +313,18 @@ static struct platform_device ek_flash =
.num_resources = 1,
};
static void __init ek_board_init(void)
{
-@@ -158,8 +351,10 @@
+@@ -158,8 +351,10 @@ static void __init ek_board_init(void)
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
}
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-kb9202.c linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.21/arch/arm/mach-at91/board-kb9202.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c Tue May 8 12:21:31 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-kb9202.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-kb9202.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-kb9202.c
@@ -37,6 +37,8 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-@@ -111,6 +113,48 @@
+@@ -111,6 +113,48 @@ static struct at91_nand_data __initdata
.partition_info = nand_partitions,
};
static void __init kb9202_board_init(void)
{
/* Serial */
-@@ -129,6 +173,8 @@
+@@ -129,6 +173,8 @@ static void __init kb9202_board_init(voi
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
}
MACHINE_START(KB9200, "KB920x")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c Tue May 8 12:13:30 2007
-@@ -104,9 +104,9 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-sam9260ek.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-sam9260ek.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-sam9260ek.c
+@@ -104,9 +104,9 @@ static struct spi_board_info ek_spi_devi
},
#endif
#endif
.chip_select = 0,
.max_speed_hz = 10 * 1000 * 1000,
.bus_num = 1,
-@@ -118,7 +118,7 @@
+@@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devi
/*
* MACB Ethernet device
*/
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
-@@ -188,6 +188,8 @@
+@@ -188,6 +188,8 @@ static void __init ek_board_init(void)
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c Wed May 9 12:37:19 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-sam9261ek.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-sam9261ek.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-sam9261ek.c
@@ -25,7 +25,11 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/setup.h>
-@@ -59,6 +63,9 @@
+@@ -59,6 +63,9 @@ static void __init ek_map_io(void)
/* Initialize processor: 18.432 MHz crystal */
at91sam9261_initialize(18432000);
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
-@@ -195,6 +202,41 @@
+@@ -195,6 +202,41 @@ static struct at91_nand_data __initdata
};
/*
* SPI devices
*/
static struct spi_board_info ek_spi_devices[] = {
-@@ -204,6 +246,17 @@
+@@ -204,6 +246,17 @@ static struct spi_board_info ek_spi_devi
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
{ /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
.modalias = "mtd_dataflash",
-@@ -211,9 +264,9 @@
+@@ -211,9 +264,9 @@ static struct spi_board_info ek_spi_devi
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
.chip_select = 3,
.max_speed_hz = 10 * 1000 * 1000,
.bus_num = 0,
-@@ -222,6 +275,65 @@
+@@ -222,6 +275,65 @@ static struct spi_board_info ek_spi_devi
};
static void __init ek_board_init(void)
{
/* Serial */
-@@ -241,10 +353,14 @@
+@@ -241,10 +353,14 @@ static void __init ek_board_init(void)
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
}
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-sam9263ek.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-sam9263ek.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-sam9263ek.c
@@ -25,6 +25,10 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/setup.h>
-@@ -86,6 +90,40 @@
+@@ -86,6 +90,40 @@ static struct at91_udc_data __initdata e
/*
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-@@ -97,6 +135,16 @@
+@@ -97,6 +135,16 @@ static struct spi_board_info ek_spi_devi
.bus_num = 0,
},
#endif
};
-@@ -112,6 +160,14 @@
+@@ -112,6 +160,14 @@ static struct at91_mmc_data __initdata e
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
-@@ -148,6 +204,73 @@
+@@ -148,6 +204,73 @@ static struct at91_nand_data __initdata
};
static void __init ek_board_init(void)
{
/* Serial */
-@@ -157,11 +280,22 @@
+@@ -157,11 +280,22 @@ static void __init ek_board_init(void)
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c Wed May 9 10:58:34 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-sam9rlek.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/board-sam9rlek.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2005 SAN People
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/clock.c linux-2.6-stable/arch/arm/mach-at91/clock.c
---- linux-2.6.21/arch/arm/mach-at91/clock.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/clock.c Tue May 8 12:13:30 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/clock.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/clock.c
++++ linux-2.6.21.7/arch/arm/mach-at91/clock.c
@@ -32,6 +32,7 @@
#include <asm/arch/cpu.h>
/*
-@@ -254,6 +255,23 @@
+@@ -254,6 +255,23 @@ EXPORT_SYMBOL(clk_get_rate);
/*------------------------------------------------------------------------*/
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/*
-@@ -375,6 +393,7 @@
+@@ -375,6 +393,7 @@ static int at91_clk_show(struct seq_file
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
for (i = 0; i < 4; i++)
seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/generic.h linux-2.6-stable/arch/arm/mach-at91/generic.h
---- linux-2.6.21/arch/arm/mach-at91/generic.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/generic.h Wed May 9 10:20:54 2007
-@@ -13,12 +13,14 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/generic.h
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/generic.h
++++ linux-2.6.21.7/arch/arm/mach-at91/generic.h
+@@ -13,12 +13,14 @@ extern void __init at91rm9200_initialize
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
-@@ -34,6 +36,7 @@
+@@ -34,6 +36,7 @@ extern void __init at91_clock_associate(
/* Power Management */
extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/ics1523.c linux-2.6-stable/arch/arm/mach-at91/ics1523.c
---- linux-2.6.21/arch/arm/mach-at91/ics1523.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/ics1523.c Tue May 8 12:13:30 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/ics1523.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/ics1523.c
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-at91rm9200/ics1523.c
+
+ return ack;
+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm.c linux-2.6-stable/arch/arm/mach-at91/pm.c
---- linux-2.6.21/arch/arm/mach-at91/pm.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/pm.c Tue May 8 12:13:31 2007
-@@ -63,6 +63,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/pm.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/pm.c
++++ linux-2.6.21.7/arch/arm/mach-at91/pm.c
+@@ -63,6 +63,7 @@ static int at91_pm_prepare(suspend_state
* Verify that all the clocks are correct before entering
* slow-clock mode.
*/
static int at91_pm_verify_clocks(void)
{
unsigned long scsr;
-@@ -104,20 +105,15 @@
+@@ -104,20 +105,15 @@ static int at91_pm_verify_clocks(void)
}
/*
static void (*slow_clock)(void);
-@@ -207,16 +203,23 @@
+@@ -207,16 +203,23 @@ static struct pm_ops at91_pm_ops ={
.enter = at91_pm_enter,
};
#endif
/* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/pm_slowclock.S
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+
+ENTRY(at91rm9200_slow_clock_sz)
+ .word .-at91rm9200_slow_clock
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.c linux-2.6-stable/arch/arm/mach-at91/tclib.c
---- linux-2.6.21/arch/arm/mach-at91/tclib.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/tclib.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/tclib.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/tclib.c
@@ -0,0 +1,17 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+ blocks = tcblocks;
+ nblocks = n;
+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.h linux-2.6-stable/arch/arm/mach-at91/tclib.h
---- linux-2.6.21/arch/arm/mach-at91/tclib.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/tclib.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/arch/arm/mach-at91/tclib.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/tclib.h
@@ -0,0 +1,11 @@
+
+#define TC_PER_TCB 3
+};
+
+extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
-diff -urN -x CVS linux-2.6.21/arch/arm/mm/Kconfig linux-2.6-stable/arch/arm/mm/Kconfig
---- linux-2.6.21/arch/arm/mm/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mm/Kconfig Wed May 9 10:20:54 2007
-@@ -171,8 +171,8 @@
+Index: linux-2.6.21.7/arch/arm/mm/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mm/Kconfig
++++ linux-2.6.21.7/arch/arm/mm/Kconfig
+@@ -171,8 +171,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
-diff -urN -x CVS linux-2.6.21/arch/arm/tools/mach-types linux-2.6-stable/arch/arm/tools/mach-types
---- linux-2.6.21/arch/arm/tools/mach-types Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/tools/mach-types Tue May 8 12:13:31 2007
-@@ -1335,3 +1335,32 @@
+Index: linux-2.6.21.7/arch/arm/tools/mach-types
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/tools/mach-types
++++ linux-2.6.21.7/arch/arm/tools/mach-types
+@@ -1335,3 +1335,32 @@ at91sam9rlek MACH_AT91SAM9RLEK AT91SAM9
comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327
sbc2410x MACH_SBC2410X SBC2410X 1328
at4x0bd MACH_AT4X0BD AT4X0BD 1329
+dwl2100 MACH_DWL2100 DWL2100 1356
+vinsi MACH_VINSI VINSI 1357
+db88f5281 MACH_DB88F5281 DB88F5281 1358
-diff -urN -x CVS linux-2.6.21/drivers/char/Kconfig linux-2.6-stable/drivers/char/Kconfig
---- linux-2.6.21/drivers/char/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/char/Kconfig Tue May 8 14:31:24 2007
-@@ -1071,5 +1071,21 @@
+Index: linux-2.6.21.7/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/Kconfig
++++ linux-2.6.21.7/drivers/char/Kconfig
+@@ -1071,5 +1071,21 @@ config TELCLOCK
/sys/devices/platform/telco_clock, with a number of files for
controlling the behavior of this hardware.
+
endmenu
-diff -urN -x CVS linux-2.6.21/drivers/char/Makefile linux-2.6-stable/drivers/char/Makefile
---- linux-2.6.21/drivers/char/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/char/Makefile Tue May 8 14:31:24 2007
-@@ -93,6 +93,8 @@
+Index: linux-2.6.21.7/drivers/char/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/Makefile
++++ linux-2.6.21.7/drivers/char/Makefile
+@@ -93,6 +93,8 @@ obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
-diff -urN -x CVS linux-2.6.21/drivers/char/at91_spi.c linux-2.6-stable/drivers/char/at91_spi.c
---- linux-2.6.21/drivers/char/at91_spi.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/char/at91_spi.c Tue May 8 14:31:24 2007
+Index: linux-2.6.21.7/drivers/char/at91_spi.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/char/at91_spi.c
@@ -0,0 +1,336 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.21/drivers/char/at91_spidev.c linux-2.6-stable/drivers/char/at91_spidev.c
---- linux-2.6.21/drivers/char/at91_spidev.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/char/at91_spidev.c Tue May 8 14:31:24 2007
+Index: linux-2.6.21.7/drivers/char/at91_spidev.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/char/at91_spidev.c
@@ -0,0 +1,236 @@
+/*
+ * User-space interface to the SPI bus on Atmel AT91RM9200
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Kconfig linux-2.6-stable/drivers/i2c/busses/Kconfig
---- linux-2.6.21/drivers/i2c/busses/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/Kconfig Tue May 8 12:13:31 2007
-@@ -81,6 +81,14 @@
+Index: linux-2.6.21.7/drivers/i2c/busses/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/i2c/busses/Kconfig
++++ linux-2.6.21.7/drivers/i2c/busses/Kconfig
+@@ -81,6 +81,14 @@ config I2C_AT91
This supports the use of the I2C interface on Atmel AT91
processors.
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
depends on I2C && (SOC_AU1550 || SOC_AU1200)
-@@ -545,6 +553,14 @@
+@@ -545,6 +553,14 @@ config I2C_VOODOO3
This driver can also be built as a module. If so, the module
will be called i2c-voodoo3.
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
depends on I2C
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Makefile linux-2.6-stable/drivers/i2c/busses/Makefile
---- linux-2.6.21/drivers/i2c/busses/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/Makefile Tue May 8 12:13:31 2007
-@@ -28,6 +28,7 @@
+Index: linux-2.6.21.7/drivers/i2c/busses/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/i2c/busses/Makefile
++++ linux-2.6.21.7/drivers/i2c/busses/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-at91.c linux-2.6-stable/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.21/drivers/i2c/busses/i2c-at91.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/i2c-at91.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/i2c/busses/i2c-at91.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/i2c/busses/i2c-at91.c
++++ linux-2.6.21.7/drivers/i2c/busses/i2c-at91.c
@@ -31,8 +31,11 @@
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
static struct clk *twi_clk;
static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
+@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo
at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
/* Calcuate clock dividers */
cdiv = cdiv + 1; /* round up */
ckdiv = 0;
while (cdiv > 255) {
-@@ -61,11 +64,12 @@
+@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo
cdiv = cdiv >> 1;
}
}
at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-pca.c linux-2.6-stable/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.21/drivers/i2c/busses/i2c-pca.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/i2c/busses/i2c-pca.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/i2c/busses/i2c-pca.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/i2c/busses/i2c-pca.c
@@ -0,0 +1,213 @@
+/*
+ * Platform driver for PCA9564 I2C bus controller.
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("PCA9564 platform driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/input/touchscreen/ads7846.c linux-2.6-stable/drivers/input/touchscreen/ads7846.c
---- linux-2.6.21/drivers/input/touchscreen/ads7846.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/input/touchscreen/ads7846.c Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/drivers/input/touchscreen/ads7846.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/input/touchscreen/ads7846.c
++++ linux-2.6.21.7/drivers/input/touchscreen/ads7846.c
@@ -39,7 +39,8 @@
/*
* This code has been heavily tested on a Nokia 770, and lightly
*
* IRQ handling needs a workaround because of a shortcoming in handling
* edge triggered IRQs on some platforms like the OMAP1/2. These
-@@ -246,18 +247,16 @@
+@@ -246,18 +247,16 @@ static int ads7846_read12_ser(struct dev
/* REVISIT: take a few more samples, and compare ... */
ts->irq_disabled = 1;
disable_irq(spi->irq);
-@@ -536,6 +535,9 @@
+@@ -536,6 +535,9 @@ static void ads7846_rx(void *ads)
} else
Rt = 0;
/* Sample found inconsistent by debouncing or pressure is beyond
* the maximum. Don't report it to user space, repeat at least
* once more the measurement
-diff -urN -x CVS linux-2.6.21/drivers/leds/Kconfig linux-2.6-stable/drivers/leds/Kconfig
---- linux-2.6.21/drivers/leds/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/leds/Kconfig Tue May 8 12:13:31 2007
-@@ -76,6 +76,13 @@
+Index: linux-2.6.21.7/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/leds/Kconfig
++++ linux-2.6.21.7/drivers/leds/Kconfig
+@@ -76,6 +76,13 @@ config LEDS_NET48XX
This option enables support for the Soekris net4801 and net4826 error
LED.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
depends on LEDS_CLASS && SCx200_GPIO
-diff -urN -x CVS linux-2.6.21/drivers/leds/Makefile linux-2.6-stable/drivers/leds/Makefile
---- linux-2.6.21/drivers/leds/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/leds/Makefile Tue May 8 12:13:31 2007
-@@ -16,6 +16,7 @@
+Index: linux-2.6.21.7/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/leds/Makefile
++++ linux-2.6.21.7/drivers/leds/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net4
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff -urN -x CVS linux-2.6.21/drivers/leds/leds-at91.c linux-2.6-stable/drivers/leds/leds-at91.c
---- linux-2.6.21/drivers/leds/leds-at91.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/leds/leds-at91.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/leds/leds-at91.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/leds/leds-at91.c
@@ -0,0 +1,140 @@
+/*
+ * AT91 GPIO based LED driver
+MODULE_DESCRIPTION("AT91 GPIO LED driver");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/mmc/at91_mci.c linux-2.6-stable/drivers/mmc/at91_mci.c
---- linux-2.6.21/drivers/mmc/at91_mci.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mmc/at91_mci.c Fri May 11 17:13:13 2007
+Index: linux-2.6.21.7/drivers/mmc/at91_mci.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mmc/at91_mci.c
++++ linux-2.6.21.7/drivers/mmc/at91_mci.c
@@ -86,7 +86,7 @@
#define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
#define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-@@ -561,9 +561,7 @@
+@@ -561,9 +561,7 @@ static void at91mci_completed_command(st
pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
if ((status & AT91_MCI_RCRCE) &&
((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
cmd->error = MMC_ERR_NONE;
-@@ -665,15 +663,15 @@
+@@ -665,15 +663,15 @@ static irqreturn_t at91_mci_irq(int irq,
int_status = at91_mci_read(host, AT91_MCI_SR);
int_mask = at91_mci_read(host, AT91_MCI_IMR);
if (int_status & AT91_MCI_UNRE)
pr_debug("MMC: Underrun error\n");
if (int_status & AT91_MCI_OVRE)
-@@ -821,7 +819,7 @@
+@@ -821,7 +819,7 @@ static int __init at91_mci_probe(struct
mmc->f_min = 375000;
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->max_blk_size = 4095;
mmc->max_blk_count = mmc->max_req_size;
-@@ -895,6 +893,8 @@
+@@ -895,6 +893,8 @@ static int __init at91_mci_probe(struct
mmc_add_host(mmc);
/*
* monitor card insertion/removal if we can
*/
-@@ -924,6 +924,8 @@
+@@ -924,6 +924,8 @@ static int __exit at91_mci_remove(struct
host = mmc_priv(mmc);
if (host->present != -1) {
free_irq(host->board->det_pin, host);
cancel_delayed_work(&host->mmc->detect);
-@@ -951,8 +953,12 @@
+@@ -951,8 +953,12 @@ static int __exit at91_mci_remove(struct
static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
if (mmc)
ret = mmc_suspend_host(mmc, state);
-@@ -962,8 +968,12 @@
+@@ -962,8 +968,12 @@ static int at91_mci_suspend(struct platf
static int at91_mci_resume(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
if (mmc)
ret = mmc_resume_host(mmc);
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Kconfig linux-2.6-stable/drivers/mtd/devices/Kconfig
---- linux-2.6.21/drivers/mtd/devices/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/devices/Kconfig Tue May 8 14:31:24 2007
-@@ -267,5 +267,11 @@
+Index: linux-2.6.21.7/drivers/mtd/devices/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/devices/Kconfig
++++ linux-2.6.21.7/drivers/mtd/devices/Kconfig
+@@ -267,5 +267,11 @@ config MTD_DOCPROBE_55AA
LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
you have managed to wipe the first block.
+ If you have such a board, say 'Y'.
+endmenu
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Makefile linux-2.6-stable/drivers/mtd/devices/Makefile
---- linux-2.6.21/drivers/mtd/devices/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/devices/Makefile Tue May 8 14:31:24 2007
-@@ -17,3 +17,4 @@
+Index: linux-2.6.21.7/drivers/mtd/devices/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/devices/Makefile
++++ linux-2.6.21.7/drivers/mtd/devices/Makefile
+@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/at91_dataflash.c linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.21/drivers/mtd/devices/at91_dataflash.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c Tue May 8 14:31:24 2007
+Index: linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
@@ -0,0 +1,667 @@
+/*
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN -x CVS linux-2.6.21/drivers/mtd/nand/at91_nand.c linux-2.6-stable/drivers/mtd/nand/at91_nand.c
---- linux-2.6.21/drivers/mtd/nand/at91_nand.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/nand/at91_nand.c Tue May 8 12:13:31 2007
-@@ -82,6 +82,10 @@
+Index: linux-2.6.21.7/drivers/mtd/nand/at91_nand.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/nand/at91_nand.c
++++ linux-2.6.21.7/drivers/mtd/nand/at91_nand.c
+@@ -82,6 +82,10 @@ static void at91_nand_disable(struct at9
at91_set_gpio_value(host->board->enable_pin, 1);
}
/*
* Probe for the NAND device.
*/
-@@ -151,6 +155,12 @@
+@@ -151,6 +155,12 @@ static int __init at91_nand_probe(struct
#ifdef CONFIG_MTD_PARTITIONS
if (host->board->partition_info)
partitions = host->board->partition_info(mtd->size, &num_partitions);
if ((!partitions) || (num_partitions == 0)) {
printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.c linux-2.6-stable/drivers/net/arm/at91_ether.c
---- linux-2.6.21/drivers/net/arm/at91_ether.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/net/arm/at91_ether.c Tue May 8 12:13:31 2007
-@@ -225,6 +225,16 @@
+Index: linux-2.6.21.7/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/net/arm/at91_ether.c
++++ linux-2.6.21.7/drivers/net/arm/at91_ether.c
+@@ -225,6 +225,16 @@ static irqreturn_t at91ether_phy_interru
if (!(phy & ((1 << 2) | 1)))
goto done;
}
update_linkspeed(dev, 0);
-@@ -280,6 +290,19 @@
+@@ -280,6 +290,19 @@ static void enable_phyirq(struct net_dev
dsintr = (1 << 10) | ( 1 << 8);
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
}
disable_mdi();
spin_unlock_irq(&lp->lock);
-@@ -323,6 +346,19 @@
+@@ -323,6 +346,19 @@ static void disable_phyirq(struct net_de
dsintr = ~((1 << 10) | (1 << 8));
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
}
disable_mdi();
spin_unlock_irq(&lp->lock);
-@@ -535,8 +571,8 @@
+@@ -535,8 +571,8 @@ static void at91ether_sethashtable(struc
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
}
/*
-@@ -943,14 +979,22 @@
+@@ -943,14 +979,22 @@ static int __init at91ether_setup(unsign
struct net_device *dev;
struct at91_private *lp;
unsigned int val;
SET_MODULE_OWNER(dev);
/* Install the interrupt handler */
-@@ -1023,12 +1067,12 @@
+@@ -1023,12 +1067,12 @@ static int __init at91ether_setup(unsign
lp->phy_address = phy_address; /* MDI address of PHY */
/* Register the network interface */
}
/* Determine current link speed */
-@@ -1063,10 +1107,16 @@
+@@ -1063,10 +1107,16 @@ static int __init at91ether_setup(unsign
printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
else if (phy_type == MII_DP83847_ID)
printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
return 0;
}
-@@ -1104,8 +1154,11 @@
+@@ -1104,8 +1154,11 @@ static int __init at91ether_probe(struct
case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
case MII_DP83847_ID: /* National Semiconductor DP83847: */
detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
break;
}
-diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.h linux-2.6-stable/drivers/net/arm/at91_ether.h
---- linux-2.6.21/drivers/net/arm/at91_ether.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/net/arm/at91_ether.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/net/arm/at91_ether.h
+===================================================================
+--- linux-2.6.21.7.orig/drivers/net/arm/at91_ether.h
++++ linux-2.6.21.7/drivers/net/arm/at91_ether.h
@@ -17,39 +17,46 @@
/* ........................................................................ */
-diff -urN -x CVS linux-2.6.21/drivers/pcmcia/at91_cf.c linux-2.6-stable/drivers/pcmcia/at91_cf.c
---- linux-2.6.21/drivers/pcmcia/at91_cf.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/pcmcia/at91_cf.c Tue May 8 12:13:31 2007
-@@ -332,20 +332,27 @@
+Index: linux-2.6.21.7/drivers/pcmcia/at91_cf.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/pcmcia/at91_cf.c
++++ linux-2.6.21.7/drivers/pcmcia/at91_cf.c
+@@ -332,20 +332,27 @@ static int at91_cf_suspend(struct platfo
struct at91_cf_data *board = cf->board;
pcmcia_socket_dev_suspend(&pdev->dev, mesg);
pcmcia_socket_dev_resume(&pdev->dev);
return 0;
}
-@@ -360,7 +367,6 @@
+@@ -360,7 +367,6 @@ static struct platform_driver at91_cf_dr
.name = (char *) driver_name,
.owner = THIS_MODULE,
},
.remove = __exit_p(at91_cf_remove),
.suspend = at91_cf_suspend,
.resume = at91_cf_resume,
-@@ -370,7 +376,7 @@
+@@ -370,7 +376,7 @@ static struct platform_driver at91_cf_dr
static int __init at91_cf_init(void)
{
}
module_init(at91_cf_init);
-diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.c linux-2.6-stable/drivers/serial/atmel_serial.c
---- linux-2.6.21/drivers/serial/atmel_serial.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/serial/atmel_serial.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/serial/atmel_serial.c
++++ linux-2.6.21.7/drivers/serial/atmel_serial.c
@@ -7,6 +7,8 @@
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
/*
* We wrap our port structure around the generic uart_port.
*/
-@@ -114,10 +129,20 @@
+@@ -114,10 +129,20 @@ struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
unsigned short suspended; /* is port suspended? */
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
#endif
-@@ -205,7 +230,12 @@
+@@ -205,7 +230,12 @@ static void atmel_stop_tx(struct uart_po
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
}
/*
-@@ -215,7 +245,17 @@
+@@ -215,7 +245,17 @@ static void atmel_start_tx(struct uart_p
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
}
/*
-@@ -225,7 +265,12 @@
+@@ -225,7 +265,12 @@ static void atmel_stop_rx(struct uart_po
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
}
/*
-@@ -248,6 +293,134 @@
+@@ -248,6 +293,134 @@ static void atmel_break_ctl(struct uart_
}
/*
* Characters received (called from interrupt handler)
*/
static void atmel_rx_chars(struct uart_port *port)
-@@ -349,6 +522,14 @@
+@@ -349,6 +522,14 @@ static irqreturn_t atmel_interrupt(int i
status = UART_GET_CSR(port);
pending = status & UART_GET_IMR(port);
while (pending) {
/* Interrupt receive */
if (pending & ATMEL_US_RXRDY)
atmel_rx_chars(port);
-@@ -363,6 +544,12 @@
+@@ -363,6 +544,12 @@ static irqreturn_t atmel_interrupt(int i
if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
wake_up_interruptible(&port->info->delta_msr_wait);
/* Interrupt transmit */
if (pending & ATMEL_US_TXRDY)
atmel_tx_chars(port);
-@@ -401,6 +588,47 @@
+@@ -401,6 +588,47 @@ static int atmel_startup(struct uart_por
}
/*
* If there is a specific "open" function (to register
* control line interrupts)
*/
-@@ -418,7 +646,15 @@
+@@ -418,7 +646,15 @@ static int atmel_startup(struct uart_por
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
return 0;
}
-@@ -431,6 +667,31 @@
+@@ -431,6 +667,31 @@ static void atmel_shutdown(struct uart_p
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
/*
* Disable all interrupts, port and break condition.
*/
UART_PUT_CR(port, ATMEL_US_RSTSTA);
-@@ -481,14 +742,20 @@
+@@ -481,14 +742,20 @@ static void atmel_serial_pm(struct uart_
*/
static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
{
/* byte size */
switch (termios->c_cflag & CSIZE) {
-@@ -534,6 +801,9 @@
+@@ -534,6 +801,9 @@ static void atmel_set_termios(struct uar
if (termios->c_iflag & (BRKINT | PARMRK))
port->read_status_mask |= ATMEL_US_RXBRK;
/*
* Characters to ignore
*/
-@@ -712,6 +982,13 @@
+@@ -712,6 +982,13 @@ static void __devinit atmel_init_port(st
clk_enable(atmel_port->clk);
port->uartclk = clk_get_rate(atmel_port->clk);
}
}
/*
-@@ -888,7 +1165,8 @@
+@@ -888,7 +1165,8 @@ static int atmel_serial_suspend(struct p
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
enable_irq_wake(port->irq);
else {
uart_suspend_port(&atmel_uart, port);
-diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.h linux-2.6-stable/drivers/serial/atmel_serial.h
---- linux-2.6.21/drivers/serial/atmel_serial.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/serial/atmel_serial.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/serial/atmel_serial.h
+===================================================================
+--- linux-2.6.21.7.orig/drivers/serial/atmel_serial.h
++++ linux-2.6.21.7/drivers/serial/atmel_serial.h
@@ -46,6 +46,9 @@
#define ATMEL_US_USMODE_ISO7816_T1 6
#define ATMEL_US_USMODE_IRDA 8
#define ATMEL_US_CHRL (3 << 6) /* Character Length */
#define ATMEL_US_CHRL_5 (0 << 6)
#define ATMEL_US_CHRL_6 (1 << 6)
-diff -urN -x CVS linux-2.6.21/drivers/spi/Kconfig linux-2.6-stable/drivers/spi/Kconfig
---- linux-2.6.21/drivers/spi/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/spi/Kconfig Tue May 8 14:31:24 2007
-@@ -54,6 +54,7 @@
+Index: linux-2.6.21.7/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/spi/Kconfig
++++ linux-2.6.21.7/drivers/spi/Kconfig
+@@ -54,6 +54,7 @@ comment "SPI Master Controller Drivers"
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on (ARCH_AT91 || AVR32) && SPI_MASTER
help
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
-@@ -82,6 +83,24 @@
+@@ -82,6 +83,24 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
config SPI_IMX
tristate "Freescale iMX SPI controller"
depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN -x CVS linux-2.6.21/drivers/spi/Makefile linux-2.6-stable/drivers/spi/Makefile
---- linux-2.6.21/drivers/spi/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/spi/Makefile Tue May 8 14:31:24 2007
-@@ -20,6 +20,7 @@
+Index: linux-2.6.21.7/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/spi/Makefile
++++ linux-2.6.21.7/drivers/spi/Makefile
+@@ -20,6 +20,7 @@ obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uw
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
-diff -urN -x CVS linux-2.6.21/drivers/spi/spi_at91_bitbang.c linux-2.6-stable/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.21/drivers/spi/spi_at91_bitbang.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/spi/spi_at91_bitbang.c Tue May 8 14:31:24 2007
+Index: linux-2.6.21.7/drivers/spi/spi_at91_bitbang.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/spi/spi_at91_bitbang.c
@@ -0,0 +1,207 @@
+/*
+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/Kconfig linux-2.6-stable/drivers/usb/gadget/Kconfig
---- linux-2.6.21/drivers/usb/gadget/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/gadget/Kconfig Wed May 9 10:20:54 2007
-@@ -189,7 +189,7 @@
+Index: linux-2.6.21.7/drivers/usb/gadget/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/usb/gadget/Kconfig
++++ linux-2.6.21.7/drivers/usb/gadget/Kconfig
+@@ -189,7 +189,7 @@ config USB_OTG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
-diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/at91_udc.c linux-2.6-stable/drivers/usb/gadget/at91_udc.c
---- linux-2.6.21/drivers/usb/gadget/at91_udc.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/gadget/at91_udc.c Tue May 8 12:13:31 2007
-@@ -1804,7 +1804,7 @@
+Index: linux-2.6.21.7/drivers/usb/gadget/at91_udc.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/usb/gadget/at91_udc.c
++++ linux-2.6.21.7/drivers/usb/gadget/at91_udc.c
+@@ -1804,7 +1804,7 @@ static int at91udc_suspend(struct platfo
*/
if ((!udc->suspended && udc->addr)
|| !wake
pullup(udc, 0);
wake = 0;
} else
-diff -urN -x CVS linux-2.6.21/drivers/usb/host/ohci-at91.c linux-2.6-stable/drivers/usb/host/ohci-at91.c
---- linux-2.6.21/drivers/usb/host/ohci-at91.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/host/ohci-at91.c Tue May 8 12:13:31 2007
-@@ -299,7 +299,7 @@
+Index: linux-2.6.21.7/drivers/usb/host/ohci-at91.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/usb/host/ohci-at91.c
++++ linux-2.6.21.7/drivers/usb/host/ohci-at91.c
+@@ -299,7 +299,7 @@ ohci_hcd_at91_drv_suspend(struct platfor
*
* REVISIT: some boards will be able to turn VBUS off...
*/
ohci_usb_reset (ohci);
at91_stop_clock();
}
-diff -urN -x CVS linux-2.6.21/drivers/video/Kconfig linux-2.6-stable/drivers/video/Kconfig
---- linux-2.6.21/drivers/video/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/Kconfig Thu May 10 12:34:41 2007
-@@ -663,6 +663,17 @@
+Index: linux-2.6.21.7/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/video/Kconfig
++++ linux-2.6.21.7/drivers/video/Kconfig
+@@ -663,6 +663,17 @@ config FB_EPSON1355
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
-@@ -674,6 +685,22 @@
+@@ -674,6 +685,22 @@ config FB_S1D13XXX
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
-diff -urN -x CVS linux-2.6.21/drivers/video/Makefile linux-2.6-stable/drivers/video/Makefile
---- linux-2.6.21/drivers/video/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/Makefile Thu May 10 12:34:01 2007
-@@ -75,6 +75,8 @@
+Index: linux-2.6.21.7/drivers/video/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/video/Makefile
++++ linux-2.6.21.7/drivers/video/Makefile
+@@ -75,6 +75,8 @@ obj-$(CONFIG_FB_G364) += g36
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN -x CVS linux-2.6.21/drivers/video/atmel_lcdfb.c linux-2.6-stable/drivers/video/atmel_lcdfb.c
---- linux-2.6.21/drivers/video/atmel_lcdfb.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/atmel_lcdfb.c Thu May 10 12:34:01 2007
+Index: linux-2.6.21.7/drivers/video/atmel_lcdfb.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/video/atmel_lcdfb.c
@@ -0,0 +1,752 @@
+/*
+ * Driver for AT91/AT32 LCD Controller
+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Kconfig linux-2.6-stable/drivers/video/backlight/Kconfig
---- linux-2.6.21/drivers/video/backlight/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/backlight/Kconfig Tue May 8 12:13:31 2007
-@@ -63,3 +63,11 @@
+Index: linux-2.6.21.7/drivers/video/backlight/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/video/backlight/Kconfig
++++ linux-2.6.21.7/drivers/video/backlight/Kconfig
+@@ -63,3 +63,11 @@ config BACKLIGHT_PROGEAR
help
If you have a Frontpath ProGear say Y to enable the
backlight driver.
+ help
+ If you have a KwikByte KB9202 board, say Y to enable the
+ backlight driver.
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Makefile linux-2.6-stable/drivers/video/backlight/Makefile
---- linux-2.6.21/drivers/video/backlight/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/backlight/Makefile Tue May 8 12:13:31 2007
-@@ -6,3 +6,4 @@
+Index: linux-2.6.21.7/drivers/video/backlight/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/video/backlight/Makefile
++++ linux-2.6.21.7/drivers/video/backlight/Makefile
+@@ -6,3 +6,4 @@ obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_b
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/kb920x_bl.c linux-2.6-stable/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.21/drivers/video/backlight/kb920x_bl.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/backlight/kb920x_bl.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/video/backlight/kb920x_bl.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/video/backlight/kb920x_bl.c
@@ -0,0 +1,164 @@
+/*
+ * Backlight Driver for KB9202
+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
+MODULE_DESCRIPTION("KB9202 Backlight Driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/video/s1d15605fb.c linux-2.6-stable/drivers/video/s1d15605fb.c
---- linux-2.6.21/drivers/video/s1d15605fb.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/s1d15605fb.c Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/drivers/video/s1d15605fb.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/video/s1d15605fb.c
@@ -0,0 +1,659 @@
+/*
+ * drivers/video/s1d15605.c
+MODULE_AUTHOR("KwikByte");
+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91_adc.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-arm/arch-at91/at91_adc.h
+#define AT91_ADC_DATA (0x3ff)
+
+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91_mci.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91_mci.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91_mci.h
@@ -26,6 +26,9 @@
#define AT91_MCI_MR 0x04 /* Mode Register */
#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h Fri May 11 16:45:00 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91_pmc.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91_pmc.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91_pmc.h
@@ -37,7 +37,9 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91rm9200.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91rm9200.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91rm9200.h
@@ -107,185 +107,4 @@
#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
-#endif
-
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9260.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91sam9260.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9260.h
@@ -117,13 +117,4 @@
#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#endif
-
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h Fri May 11 16:20:33 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9260_matrix.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91sam9260_matrix.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -67,7 +67,7 @@
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9261.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91sam9261.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9261.h
@@ -98,195 +98,4 @@
#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
-#endif
-
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h Tue May 8 12:56:33 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9263.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/at91sam9263.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9263.h
@@ -119,13 +119,5 @@
#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
-#endif
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h Fri May 11 14:53:48 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9rl.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9rl.h
@@ -0,0 +1,110 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+
+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h Fri May 11 16:18:45 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/include/asm-arm/arch-at91/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9rl_matrix.h
+
+
+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h
---- linux-2.6.21/include/asm-arm/arch-at91/board.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/board.h Thu May 10 12:21:10 2007
-@@ -62,7 +62,7 @@
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/board.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/board.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/board.h
+@@ -62,7 +62,7 @@ struct at91_mmc_data {
};
extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
struct at91_eth_data {
u8 phy_irq_pin; /* PHY IRQ */
u8 is_rmii; /* using RMII interface? */
-@@ -114,9 +114,31 @@
+@@ -114,9 +114,31 @@ struct atmel_uart_data {
};
extern void __init at91_add_device_serial(void);
+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
+
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/cpu.h linux-2.6-stable/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.21/include/asm-arm/arch-at91/cpu.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/cpu.h Wed May 9 10:20:54 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/cpu.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/cpu.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/cpu.h
@@ -26,6 +26,8 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
static inline unsigned long at91_cpu_identify(void)
{
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-@@ -68,4 +70,10 @@
+@@ -68,4 +70,10 @@ static inline unsigned long at91_arch_id
#define cpu_is_at91sam9263() (0)
#endif
+#endif
+
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/hardware.h linux-2.6-stable/include/asm-arm/arch-at91/hardware.h
---- linux-2.6.21/include/asm-arm/arch-at91/hardware.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/hardware.h Fri May 11 14:45:12 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/hardware.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/hardware.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/hardware.h
@@ -24,6 +24,8 @@
#include <asm/arch/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
-#endif
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.21/include/asm-arm/arch-at91/ics1523.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/ics1523.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/include/asm-arm/arch-at91/ics1523.h
@@ -0,0 +1,154 @@
+//*----------------------------------------------------------------------------
+//* ATMEL Microcontroller Software Support - ROUSSET -
+int at91_ics1523_init(void);
+
+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/io.h linux-2.6-stable/include/asm-arm/arch-at91/io.h
---- linux-2.6.21/include/asm-arm/arch-at91/io.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/io.h Fri May 11 14:45:12 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/io.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/io.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/io.h
@@ -29,4 +29,22 @@
#define __mem_pci(a) (a)
+#endif
+
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/irqs.h linux-2.6-stable/include/asm-arm/arch-at91/irqs.h
---- linux-2.6.21/include/asm-arm/arch-at91/irqs.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/irqs.h Fri May 11 14:45:12 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/irqs.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/irqs.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/irqs.h
@@ -21,6 +21,7 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#include <asm/arch/at91_aic.h>
#define NR_AIC_IRQS 32
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h
---- linux-2.6.21/include/asm-arm/arch-at91/spi.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h Tue May 8 14:31:24 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/spi.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/include/asm-arm/arch-at91/spi.h
@@ -0,0 +1,54 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
+extern int spi_transfer(struct spi_transfer_list* list);
+
+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/timex.h linux-2.6-stable/include/asm-arm/arch-at91/timex.h
---- linux-2.6.21/include/asm-arm/arch-at91/timex.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/timex.h Wed May 9 10:20:53 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/timex.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/timex.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/timex.h
@@ -37,6 +37,11 @@
#define AT91SAM9_MASTER_CLOCK 99959500
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#endif
#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/uncompress.h linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h
---- linux-2.6.21/include/asm-arm/arch-at91/uncompress.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h Fri May 11 14:45:12 2007
+Index: linux-2.6.21.7/include/asm-arm/arch-at91/uncompress.h
+===================================================================
+--- linux-2.6.21.7.orig/include/asm-arm/arch-at91/uncompress.h
++++ linux-2.6.21.7/include/asm-arm/arch-at91/uncompress.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <asm/arch/at91_dbgu.h>
/*
-diff -urN -x CVS linux-2.6.21/include/linux/clk.h linux-2.6-stable/include/linux/clk.h
---- linux-2.6.21/include/linux/clk.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/clk.h Tue May 8 12:13:31 2007
-@@ -121,4 +121,24 @@
+Index: linux-2.6.21.7/include/linux/clk.h
+===================================================================
+--- linux-2.6.21.7.orig/include/linux/clk.h
++++ linux-2.6.21.7/include/linux/clk.h
+@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru
*/
struct clk *clk_get_parent(struct clk *clk);
+int clk_must_disable(struct clk *clk);
+
#endif
-diff -urN -x CVS linux-2.6.21/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h
---- linux-2.6.21/include/linux/i2c-id.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/i2c-id.h Tue May 8 12:13:31 2007
+Index: linux-2.6.21.7/include/linux/i2c-id.h
+===================================================================
+--- linux-2.6.21.7.orig/include/linux/i2c-id.h
++++ linux-2.6.21.7/include/linux/i2c-id.h
@@ -202,6 +202,7 @@
/* --- PCA 9564 based algorithms */
/* --- ACPI Embedded controller algorithms */
#define I2C_HW_ACPI_EC 0x1f0000
-diff -urN -x CVS linux-2.6.21/include/video/atmel_lcdc.h linux-2.6-stable/include/video/atmel_lcdc.h
---- linux-2.6.21/include/video/atmel_lcdc.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/video/atmel_lcdc.h Thu May 10 12:34:01 2007
+Index: linux-2.6.21.7/include/video/atmel_lcdc.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/include/video/atmel_lcdc.h
@@ -0,0 +1,196 @@
+/*
+ * Header file for AT91/AT32 LCD Controller
+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */
-diff -urN -x CVS linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c Tue May 8 12:13:58 2007
+Index: linux-2.6.21.7/sound/soc/at91/eti_b1_wm8731.c
+===================================================================
+--- linux-2.6.21.7.orig/sound/soc/at91/eti_b1_wm8731.c
++++ linux-2.6.21.7/sound/soc/at91/eti_b1_wm8731.c
@@ -34,8 +34,7 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
static struct clk *pck1_clk;
static struct clk *pllb_clk;
-@@ -277,7 +269,6 @@
+@@ -277,7 +269,6 @@ static struct platform_device *eti_b1_sn
static int __init eti_b1_init(void)
{
int ret;
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -311,19 +302,12 @@
+@@ -311,19 +302,12 @@ static int __init eti_b1_init(void)
goto fail_io_unmap;
}
---- linux-2.6.21.1.orig/arch/arm/boot/compressed/head-at91rm9200.S 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/boot/compressed/head-at91rm9200.S 2007-05-28 12:52:16.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/boot/compressed/head-at91rm9200.S
++++ linux-2.6.21.7/arch/arm/boot/compressed/head-at91rm9200.S
@@ -61,6 +61,12 @@
cmp r7, r3
beq 99f
@ Ajeco 1ARM : 1075
mov r3, #(MACH_TYPE_ONEARM & 0xff)
orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-05-28 13:09:54.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/arm/mach-at91/board-vlink.c
+ .init_irq = vlink_init_irq,
+ .init_machine = vlink_board_init,
+MACHINE_END
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Kconfig 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Kconfig 2007-05-28 13:11:45.000000000 +0200
-@@ -96,6 +96,12 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Kconfig
++++ linux-2.6.21.7/arch/arm/mach-at91/Kconfig
+@@ -96,6 +96,12 @@ config MACH_CHUB
help
Select this if you are using Promwad's Chub board.
endif
# ----------------------------------------------------------
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Makefile 2007-05-28 13:13:15.000000000 +0200
-@@ -29,6 +29,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.21.7/arch/arm/mach-at91/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200) += board-kb920
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_CHUB) += board-chub.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-@@ -51,6 +52,7 @@
+@@ -51,6 +52,7 @@ led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
led-$(CONFIG_MACH_KAFA) += leds.o
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c 2007-05-28 13:33:41.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-05-28 14:43:28.000000000 +0200
-@@ -61,7 +61,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -61,7 +61,7 @@ static void __init vlink_map_io(void)
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Setup the LEDs */
/* Setup the serial ports and console */
at91_init_serial(&vlink_uart_config);
-@@ -81,10 +81,12 @@
+@@ -81,10 +81,12 @@ static struct at91_usbh_data __initdata
.ports = 1,
};
static struct at91_mmc_data __initdata vlink_mmc_data = {
// .det_pin = AT91_PIN_PB27,
-@@ -108,18 +110,19 @@
+@@ -108,18 +110,19 @@ static struct spi_board_info vlink_spi_d
#endif
};
static void __init vlink_board_init(void)
{
-@@ -130,8 +133,8 @@
+@@ -130,8 +133,8 @@ static void __init vlink_board_init(void
/* USB Host */
at91_add_device_usbh(&vlink_usbh_data);
/* USB Device */
/* I2C */
at91_add_device_i2c();
/* SPI */
-@@ -145,7 +148,7 @@
+@@ -145,7 +148,7 @@ static void __init vlink_board_init(void
at91_add_device_mmc(0, &vlink_mmc_data);
#endif
/* LEDs */
}
MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile linux-2.6.21.1/arch/arm/mach-at91/Makefile
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile 2007-05-28 13:13:15.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Makefile 2007-05-28 14:19:06.000000000 +0200
-@@ -52,7 +52,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.21.7/arch/arm/mach-at91/Makefile
+@@ -52,7 +52,7 @@ led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
led-$(CONFIG_MACH_KAFA) += leds.o
obj-$(CONFIG_LEDS) += $(led-y)
# VGA support
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c
---- linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c 2007-05-28 14:41:03.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/mach-at91/vlink_leds.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/arch/arm/mach-at91/vlink_leds.c
@@ -0,0 +1,105 @@
+/*
+ * LED driver for Atmel AT91-based boards.
---- linux-2.6.21.1.orig/arch/arm/mach-at91/gpio.c 2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/gpio.c 2007-05-28 15:30:48.000000000 +0200
+Index: linux-2.6.21.7/arch/arm/mach-at91/gpio.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/gpio.c
++++ linux-2.6.21.7/arch/arm/mach-at91/gpio.c
@@ -27,6 +27,7 @@
static struct at91_gpio_bank *gpio;
static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@
+@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@
+@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@
+@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + PIO_PUDR);
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@
+@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin)
}
EXPORT_SYMBOL(at91_get_gpio_value);
/*--------------------------------------------------------------------------*/
#ifdef CONFIG_PM
---- linux-2.6.21.1.orig/drivers/char/Kconfig 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/char/Kconfig 2007-05-28 15:37:43.000000000 +0200
-@@ -1087,5 +1087,12 @@
+Index: linux-2.6.21.7/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/Kconfig
++++ linux-2.6.21.7/drivers/char/Kconfig
+@@ -1087,5 +1087,12 @@ config AT91_SPIDEV
The SPI driver gives user mode access to this serial
bus on the AT91RM9200 processor.
+
endmenu
---- linux-2.6.21.1.orig/drivers/char/Makefile 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/char/Makefile 2007-05-28 15:38:11.000000000 +0200
-@@ -95,6 +95,7 @@
+Index: linux-2.6.21.7/drivers/char/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/Makefile
++++ linux-2.6.21.7/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_AT91_SPI) += at91_spi.o
obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
---- linux-2.6.21.1.orig/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/drivers/char/vlink_giu.c 2007-05-28 15:39:47.000000000 +0200
+Index: linux-2.6.21.7/drivers/char/vlink_giu.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.7/drivers/char/vlink_giu.c
@@ -0,0 +1,256 @@
+/*
+ * Driver for FDL Versalink GPIO
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c 2007-05-28 15:53:31.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-05-28 15:58:46.000000000 +0200
-@@ -149,6 +149,33 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -149,6 +149,33 @@ static void __init vlink_board_init(void
#endif
/* LEDs */
// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
---- linux-2.6.21.1.orig/drivers/mtd/devices/at91_dataflash.c 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/devices/at91_dataflash.c 2007-05-28 16:10:21.000000000 +0200
-@@ -173,7 +173,7 @@
+Index: linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+@@ -173,7 +173,7 @@ static struct mtd_partition static_parti
};
#endif
#endif
---- linux-2.6.21.1.orig/drivers/mtd/Kconfig 2007-05-28 12:22:09.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/Kconfig 2007-05-28 16:09:16.000000000 +0200
-@@ -157,6 +157,12 @@
+Index: linux-2.6.21.7/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/Kconfig
++++ linux-2.6.21.7/drivers/mtd/Kconfig
+@@ -162,6 +162,12 @@ config MTD_AFS_PARTS
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
comment "User Modules And Translation Layers"
depends on MTD
---- linux-2.6.21.1.orig/drivers/mtd/Makefile 2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/Makefile 2007-05-28 16:09:55.000000000 +0200
-@@ -12,6 +12,7 @@
+Index: linux-2.6.21.7/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/Makefile
++++ linux-2.6.21.7/drivers/mtd/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
---- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200
-@@ -174,7 +174,35 @@
+Index: linux-2.6.21.7/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/serial/atmel_serial.c
++++ linux-2.6.21.7/drivers/serial/atmel_serial.c
+@@ -174,7 +174,35 @@ static void atmel_set_mctrl(struct uart_
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
at91_set_gpio_value(AT91_PIN_PA21, 1);
}
#endif
-@@ -211,8 +239,10 @@
+@@ -211,8 +239,10 @@ static u_int atmel_get_mctrl(struct uart
/*
* The control signals are active low.
*/
if (!(status & ATMEL_US_CTS))
ret |= TIOCM_CTS;
if (!(status & ATMEL_US_DSR))
-@@ -220,6 +250,16 @@
+@@ -220,6 +250,16 @@ static u_int atmel_get_mctrl(struct uart
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
return ret;
}
-@@ -511,6 +551,34 @@
+@@ -511,6 +551,34 @@ static void atmel_tx_chars(struct uart_p
}
/*
* Interrupt handler
*/
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -587,6 +655,23 @@
+@@ -587,6 +655,23 @@ static int atmel_startup(struct uart_por
return retval;
}
/*
* Initialize DMA (if necessary)
*/
-@@ -603,6 +688,10 @@
+@@ -603,6 +688,10 @@ static int atmel_startup(struct uart_por
kfree(atmel_port->pdc_rx[0].buf);
}
free_irq(port->irq, port);
return -ENOMEM;
}
pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -636,6 +725,10 @@
+@@ -636,6 +725,10 @@ static int atmel_startup(struct uart_por
retval = atmel_open_hook(port);
if (retval) {
free_irq(port->irq, port);
return retval;
}
}
-@@ -701,6 +794,10 @@
+@@ -701,6 +794,10 @@ static void atmel_shutdown(struct uart_p
* Free the interrupt
*/
free_irq(port->irq, port);
---- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 16:44:36.000000000 +0200
-@@ -618,7 +618,6 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -618,7 +618,6 @@ void __init at91_init_leds(u8 cpu_led, u
#if defined(CONFIG_NEW_LEDS)
static struct platform_device at91_leds = {
.name = "at91_leds",
.id = -1,
-@@ -724,6 +723,10 @@
+@@ -724,6 +723,10 @@ static inline void configure_usart0_pins
* We need to drive the pin manually. Default is off (RTS is active low).
*/
at91_set_gpio_output(AT91_PIN_PA21, 1);
}
static struct resource uart1_resources[] = {
-@@ -835,6 +838,12 @@
+@@ -835,6 +838,12 @@ static inline void configure_usart3_pins
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
---- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old 2007-06-04 18:15:49.000000000 +0200
-+++ linux-2.6.21.1/drivers/net/arm/at91_ether.c 2007-06-04 18:10:36.000000000 +0200
-@@ -146,6 +146,7 @@
+Index: linux-2.6.21.7/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/net/arm/at91_ether.c
++++ linux-2.6.21.7/drivers/net/arm/at91_ether.c
+@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
struct at91_private *lp = netdev_priv(dev);
unsigned int bmsr, bmcr, lpa, mac_cfg;
unsigned int speed, duplex;
if (!mii_link_ok(&lp->mii)) { /* no link */
netif_carrier_off(dev);
-@@ -158,8 +159,15 @@
+@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
read_phy(lp->phy_address, MII_BMSR, &bmsr);
read_phy(lp->phy_address, MII_BMCR, &bmcr);
if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
---- linux-2.6.21.1.old/arch/arm/mach-at91/board-vlink.c 2007-06-04 15:45:19.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c 2007-06-05 05:27:19.000000000 +0200
-@@ -175,6 +175,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -175,6 +175,7 @@ static void __init vlink_board_init(void
/* USB Device control */
at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
---- linux-2.6.21.1.old/drivers/mmc/at91_mci.c 2007-06-05 09:08:57.000000000 +0200
-+++ linux-2.6.21.1/drivers/mmc/at91_mci.c 2007-06-05 10:59:11.000000000 +0200
+Index: linux-2.6.21.7/drivers/mmc/at91_mci.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mmc/at91_mci.c
++++ linux-2.6.21.7/drivers/mmc/at91_mci.c
@@ -79,7 +79,8 @@
#define DRIVER_NAME "at91_mci"
#define FL_SENT_COMMAND (1 << 0)
#define FL_SENT_STOP (1 << 1)
-@@ -132,7 +133,7 @@
+@@ -132,7 +133,7 @@ struct at91mci_host
/*
* Copy from sg to a dma block - used for transfers
*/
{
unsigned int len, i, size;
unsigned *dmabuf = host->buffer;
-@@ -181,7 +182,7 @@
+@@ -181,7 +182,7 @@ static inline void at91mci_sg_to_dma(str
/*
* Prepare a dma read
*/
{
int i;
struct scatterlist *sg;
-@@ -249,23 +250,24 @@
+@@ -249,23 +250,24 @@ static void at91mci_pre_dma_read(struct
/*
* Handle after a dma read
*/
}
while (host->in_use_index < host->transfer_index) {
-@@ -300,39 +302,14 @@
+@@ -300,39 +302,14 @@ static void at91mci_post_dma_read(struct
/* Is there another transfer to trigger? */
if (host->transfer_index < data->sg_len)
}
/*
-@@ -340,10 +317,17 @@
+@@ -340,10 +317,17 @@ static void at91_mci_handle_transmitted(
*/
static void at91_mci_enable(struct at91mci_host *host)
{
/* use Slot A or B (only one at same time) */
at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-@@ -359,9 +343,8 @@
+@@ -359,9 +343,8 @@ static void at91_mci_disable(struct at91
/*
* Send a command
{
unsigned int cmdr, mr;
unsigned int block_length;
-@@ -372,8 +355,7 @@
+@@ -372,8 +355,7 @@ static unsigned int at91_mci_send_comman
host->cmd = cmd;
if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
pr_debug("Clearing timeout\n");
at91_mci_write(host, AT91_MCI_ARGR, 0);
-@@ -383,7 +365,7 @@
+@@ -383,7 +365,7 @@ static unsigned int at91_mci_send_comman
pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
}
}
cmdr = cmd->opcode;
if (mmc_resp_type(cmd) == MMC_RSP_NONE)
-@@ -440,50 +422,48 @@
+@@ -440,50 +422,48 @@ static unsigned int at91_mci_send_comman
at91_mci_write(host, ATMEL_PDC_TCR, 0);
at91_mci_write(host, ATMEL_PDC_TNPR, 0);
at91_mci_write(host, ATMEL_PDC_TNCR, 0);
}
}
-@@ -498,39 +478,24 @@
+@@ -498,39 +478,24 @@ static unsigned int at91_mci_send_comman
if (cmdr & AT91_MCI_TRCMD_START) {
if (cmdr & AT91_MCI_TRDIR)
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
}
else
mmc_request_done(host->mmc, host->request);
-@@ -539,7 +504,7 @@
+@@ -539,7 +504,7 @@ static void at91mci_process_next(struct
/*
* Handle a command that has been completed
*/
{
struct mmc_command *cmd = host->cmd;
unsigned int status;
-@@ -583,7 +548,7 @@
+@@ -583,7 +548,7 @@ static void at91mci_completed_command(st
else
cmd->error = MMC_ERR_NONE;
}
/*
-@@ -595,7 +560,60 @@
+@@ -595,7 +560,60 @@ static void at91_mci_request(struct mmc_
host->request = mrq;
host->flags = 0;
}
/*
-@@ -698,29 +716,33 @@
+@@ -698,29 +716,33 @@ static irqreturn_t at91_mci_irq(int irq,
at91_mci_handle_transmitted(host);
}
if (int_status & AT91_MCI_TXRDY)
pr_debug("Ready to transmit\n");
-@@ -730,14 +752,14 @@
+@@ -730,14 +752,14 @@ static irqreturn_t at91_mci_irq(int irq,
if (int_status & AT91_MCI_CMDRDY) {
pr_debug("Command ready\n");
---- linux-2.6.21.1.old/drivers/mmc/at91_mci.c 2007-06-05 11:08:39.000000000 +0200
-+++ linux-2.6.21.1/drivers/mmc/at91_mci.c 2007-06-05 11:28:40.000000000 +0200
+Index: linux-2.6.21.7/drivers/mmc/at91_mci.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mmc/at91_mci.c
++++ linux-2.6.21.7/drivers/mmc/at91_mci.c
@@ -79,8 +79,7 @@
#define DRIVER_NAME "at91_mci"
---- linux-2.6.21.5.old/drivers/mtd/devices/at91_dataflash.c 2007-06-13 13:31:24.000000000 +0200
-+++ linux-2.6.21.5/drivers/mtd/devices/at91_dataflash.c 2007-06-19 12:49:48.000000000 +0200
-@@ -161,12 +161,12 @@
+Index: linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.21.7/drivers/mtd/devices/at91_dataflash.c
+@@ -161,12 +161,12 @@ static struct mtd_partition static_parti
.mask_flags = MTD_WRITEABLE, /* read-only */
},
{
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c\r
---- linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c 2007-07-26 12:43:11.000000000 +0200\r
-+++ linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c 2007-08-20 16:56:56.000000000 +0200\r
-@@ -151,31 +151,37 @@\r
- // at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));\r
- \r
- /* Other LED's */\r
-- at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1\r
-- at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1\r
-- at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1\r
-- at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1\r
-- at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2\r
-- at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2\r
-+ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1\r
-+ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1\r
-+ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1\r
-+ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1\r
-+ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2\r
-+ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2\r
-+\r
-+/* Test jig presence detection */\r
-+ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT\r
- \r
- /* SIM Cards */\r
-- at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3\r
-- at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2\r
-- at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1\r
-+ if (at91_get_gpio_value(AT91_PIN_PB8)) {\r
-+ at91_set_gpio_output(AT91_PIN_PB11, 0);\r
-+ at91_set_gpio_output(AT91_PIN_PB9, 1);\r
-+ } else {\r
-+ at91_set_gpio_output(AT91_PIN_PB11, 1);\r
-+ at91_set_gpio_output(AT91_PIN_PB9, 0);\r
-+ }\r
-+ \r
-+ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2\r
- \r
- /* GSM Module Control */\r
-- at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF\r
--\r
--/* Test jig presence detection */\r
-- at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT\r
-+ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF\r
- \r
- /* Power indicator */\r
-- at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND\r
-+ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND\r
- \r
- /* USB Device control */\r
-- at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX\r
-- at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP\r
-- at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive\r
-+ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX\r
-+ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP\r
-+ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive\r
- \r
- }\r
- \r
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -150,32 +150,38 @@ static void __init vlink_board_init(void
+ /* LEDs */
+ // at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
+
+-/* Other LED's */
+- at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
+- at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
+- at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
+- at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
+- at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
+- at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
+-
+-/* SIM Cards */
+- at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3
+- at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
+- at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
+-
+-/* GSM Module Control */
+- at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
+-
+-/* Test jig presence detection */
+- at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
+-
+-/* Power indicator */
+- at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
+-
+-/* USB Device control */
+- at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
+- at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
+- at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
++ /* Other LED's */
++ at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1
++ at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1
++ at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
++ at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
++ at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
++ at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
++
++ /* Test jig presence detection */
++ at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT
++
++ /* SIM Cards */
++ if (at91_get_gpio_value(AT91_PIN_PB8)) {
++ at91_set_gpio_output(AT91_PIN_PB11, 0);
++ at91_set_gpio_output(AT91_PIN_PB9, 1);
++ } else {
++ at91_set_gpio_output(AT91_PIN_PB11, 1);
++ at91_set_gpio_output(AT91_PIN_PB9, 0);
++ }
++
++ at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
++
++ /* GSM Module Control */
++ at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
++
++ /* Power indicator */
++ at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND
++
++ /* USB Device control */
++ at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
++ at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
++ at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
+
+ }
+
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.21.5/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-13 16:34:43.000000000 +0100
-@@ -840,9 +840,9 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -840,9 +840,9 @@ static inline void configure_usart3_pins
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
at91_set_deglitch(AT91_PIN_PA24, 1);
}
-diff -urN linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.5.old/arch/arm/mach-at91/board-vlink.c 2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/arch/arm/mach-at91/board-vlink.c 2008-03-13 16:35:05.000000000 +0100
-@@ -126,6 +126,7 @@
+Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
++++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
+@@ -126,6 +126,7 @@ static struct spi_board_info vlink_spi_d
static void __init vlink_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* Ethernet */
-@@ -147,6 +148,10 @@
+@@ -147,6 +148,10 @@ static void __init vlink_board_init(void
// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &vlink_mmc_data);
#endif
/* LEDs */
// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-@@ -164,10 +169,16 @@
- /* SIM Cards */
+@@ -164,10 +169,16 @@ static void __init vlink_board_init(void
+ /* SIM Cards */
if (at91_get_gpio_value(AT91_PIN_PB8)) {
at91_set_gpio_output(AT91_PIN_PB11, 0);
- at91_set_gpio_output(AT91_PIN_PB9, 1);
+ else
+ at91_set_gpio_output(AT91_PIN_PC13, 0);
}
-
+
at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-@@ -182,7 +193,18 @@
+@@ -182,7 +193,18 @@ static void __init vlink_board_init(void
at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX
at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
}
MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.21.5.old/drivers/char/vlink_giu.c linux-2.6.21.5/drivers/char/vlink_giu.c
---- linux-2.6.21.5.old/drivers/char/vlink_giu.c 2008-03-13 16:24:18.000000000 +0100
-+++ linux-2.6.21.5/drivers/char/vlink_giu.c 2008-03-13 16:37:06.000000000 +0100
-@@ -41,8 +41,7 @@
+Index: linux-2.6.21.7/drivers/char/vlink_giu.c
+===================================================================
+--- linux-2.6.21.7.orig/drivers/char/vlink_giu.c
++++ linux-2.6.21.7/drivers/char/vlink_giu.c
+@@ -41,8 +41,7 @@ static int major; /* default is dynamic
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
struct vio_dev {
struct cdev cdev;
};
-@@ -50,6 +49,53 @@
+@@ -50,6 +49,53 @@ struct vio_dev {
struct vio_dev *vio_devices;
static struct class *vio_class;
static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
loff_t *ppos)
{
-@@ -160,6 +206,8 @@
+@@ -160,6 +206,8 @@ static int vio_probe(struct platform_dev
{
int retval, i, j;
dev_t vdev = 0;
if (major) {
vdev = MKDEV(major, 0);
-@@ -185,6 +233,7 @@
+@@ -185,6 +233,7 @@ static int vio_probe(struct platform_dev
vio_remove(dev);
return PTR_ERR(vio_class);
}
vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
if (!vio_devices) {
-@@ -198,8 +247,10 @@
+@@ -198,8 +247,10 @@ static int vio_probe(struct platform_dev
int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
if (iodev) {
vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
}
}
-@@ -212,6 +263,29 @@
+@@ -212,6 +263,29 @@ fail:
return retval;
}
-diff -urN linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22-rc5.new/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.22-rc5/arch/arm/boot/compressed/head-at91rm9200.S 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/boot/compressed/head-at91rm9200.S
++++ linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S
@@ -73,6 +73,12 @@
cmp r7, r3
beq 99f
@ Unknown board, use the AT91RM9200DK board
@ mov r7, #MACH_TYPE_AT91RM9200
mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
-diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9260ek_defconfig
---- linux-2.6.22-rc5/arch/arm/configs/at91sam9260ek_defconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9260ek_defconfig 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/configs/at91sam9260ek_defconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/configs/at91sam9260ek_defconfig
++++ linux-2.6.22.19/arch/arm/configs/at91sam9260ek_defconfig
@@ -1,18 +1,24 @@
#
# Automatically generated make config: don't edit
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-@@ -31,13 +37,16 @@
+@@ -31,13 +37,16 @@ CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-@@ -76,7 +85,9 @@
+@@ -76,7 +85,9 @@ CONFIG_KMOD=y
# Block layer
#
CONFIG_BLOCK=y
#
# IO Schedulers
-@@ -110,10 +121,12 @@
+@@ -110,10 +121,12 @@ CONFIG_ARCH_AT91=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
-@@ -129,21 +142,29 @@
+@@ -129,21 +142,29 @@ CONFIG_ARCH_AT91=y
# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_AT91SAM9260=y
# CONFIG_ARCH_AT91SAM9261 is not set
#
# Processor Type
-@@ -166,6 +187,7 @@
+@@ -166,6 +187,7 @@ CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
#
# Bus support
-@@ -193,6 +215,7 @@
+@@ -193,6 +215,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
-@@ -203,6 +226,7 @@
+@@ -203,6 +226,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
-@@ -228,7 +252,6 @@
+@@ -228,7 +252,6 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
#
# Networking
-@@ -242,9 +265,6 @@
+@@ -242,9 +265,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
-@@ -263,14 +283,15 @@
+@@ -263,14 +283,15 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-@@ -328,6 +349,7 @@
+@@ -328,6 +349,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
-@@ -348,6 +370,7 @@
+@@ -348,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
#
# Block devices
-@@ -360,7 +383,6 @@
+@@ -360,7 +383,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-@@ -369,6 +391,7 @@
+@@ -369,6 +391,7 @@ CONFIG_BLK_DEV_INITRD=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
-@@ -388,6 +411,7 @@
+@@ -388,6 +411,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
-@@ -405,6 +429,11 @@
+@@ -405,6 +429,11 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
-@@ -425,7 +454,51 @@
+@@ -425,7 +454,51 @@ CONFIG_SCSI_MULTI_LUN=y
#
# Network device support
#
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-@@ -517,10 +590,6 @@
+@@ -517,10 +590,6 @@ CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
-@@ -553,7 +622,11 @@
+@@ -553,7 +622,11 @@ CONFIG_HW_RANDOM=y
#
# Misc devices
#
#
# LED devices
-@@ -582,7 +655,7 @@
+@@ -582,7 +655,7 @@ CONFIG_HW_RANDOM=y
#
# Graphics support
#
# CONFIG_FB is not set
#
-@@ -590,7 +663,6 @@
+@@ -590,7 +663,6 @@ CONFIG_HW_RANDOM=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
-@@ -598,6 +670,12 @@
+@@ -598,6 +670,12 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
-@@ -610,7 +688,6 @@
+@@ -610,7 +688,6 @@ CONFIG_USB=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-@@ -619,7 +696,8 @@
+@@ -619,7 +696,8 @@ CONFIG_USB_DEVICEFS=y
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
-@@ -671,6 +749,7 @@
+@@ -671,6 +749,7 @@ CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
-@@ -708,6 +787,7 @@
+@@ -708,6 +787,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-@@ -717,6 +797,7 @@
+@@ -717,6 +797,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
-@@ -889,6 +970,11 @@
+@@ -889,6 +970,11 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
-@@ -900,28 +986,30 @@
+@@ -900,28 +986,30 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-@@ -941,9 +1029,12 @@
+@@ -941,9 +1029,12 @@ CONFIG_DEBUG_LL=y
#
# Library routines
#
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9261ek_defconfig
---- linux-2.6.22-rc5/arch/arm/configs/at91sam9261ek_defconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9261ek_defconfig 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/configs/at91sam9261ek_defconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/configs/at91sam9261ek_defconfig
++++ linux-2.6.22.19/arch/arm/configs/at91sam9261ek_defconfig
@@ -1,18 +1,24 @@
#
# Automatically generated make config: don't edit
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-@@ -31,13 +37,16 @@
+@@ -31,13 +37,16 @@ CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-@@ -76,7 +85,9 @@
+@@ -76,7 +85,9 @@ CONFIG_KMOD=y
# Block layer
#
CONFIG_BLOCK=y
#
# IO Schedulers
-@@ -110,10 +121,12 @@
+@@ -110,10 +121,12 @@ CONFIG_ARCH_AT91=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
-@@ -129,6 +142,7 @@
+@@ -129,6 +142,7 @@ CONFIG_ARCH_AT91=y
# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_AT91SAM9260 is not set
CONFIG_ARCH_AT91SAM9261=y
#
# AT91SAM9261 Board Type
-@@ -138,12 +152,14 @@
+@@ -138,12 +152,14 @@ CONFIG_MACH_AT91SAM9261EK=y
#
# AT91 Board Options
#
#
# Processor Type
-@@ -166,6 +182,7 @@
+@@ -166,6 +182,7 @@ CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
#
# Bus support
-@@ -193,6 +210,7 @@
+@@ -193,6 +210,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
-@@ -203,6 +221,7 @@
+@@ -203,6 +221,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
-@@ -228,7 +247,6 @@
+@@ -228,7 +247,6 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
#
# Networking
-@@ -245,6 +263,7 @@
+@@ -245,6 +263,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
-@@ -271,6 +290,7 @@
+@@ -271,6 +290,7 @@ CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-@@ -328,6 +348,7 @@
+@@ -328,6 +348,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
-@@ -350,6 +371,7 @@
+@@ -350,6 +371,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
-@@ -386,6 +408,8 @@
+@@ -386,6 +408,8 @@ CONFIG_MTD_CFI_I2=y
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-@@ -422,6 +446,7 @@
+@@ -422,6 +446,7 @@ CONFIG_MTD_NAND_AT91=y
#
# Plug and Play support
#
#
# Block devices
-@@ -434,7 +459,6 @@
+@@ -434,7 +459,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-@@ -443,6 +467,7 @@
+@@ -443,6 +467,7 @@ CONFIG_BLK_DEV_INITRD=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
-@@ -462,6 +487,7 @@
+@@ -462,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
-@@ -479,6 +505,11 @@
+@@ -479,6 +505,11 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
-@@ -575,7 +606,16 @@
+@@ -575,7 +606,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_MISC is not set
#
-@@ -634,10 +674,6 @@
+@@ -634,10 +674,6 @@ CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
-@@ -662,6 +698,7 @@
+@@ -662,6 +698,7 @@ CONFIG_I2C_CHARDEV=y
# I2C Hardware Bus support
#
CONFIG_I2C_AT91=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
-@@ -686,8 +723,20 @@
+@@ -686,8 +723,20 @@ CONFIG_I2C_AT91=y
#
# SPI support
#
#
# Dallas's 1-wire bus
-@@ -703,7 +752,11 @@
+@@ -703,7 +752,11 @@ CONFIG_I2C_AT91=y
#
# Misc devices
#
#
# LED devices
-@@ -732,7 +785,7 @@
+@@ -732,7 +785,7 @@ CONFIG_I2C_AT91=y
#
# Graphics support
#
# CONFIG_FB is not set
#
-@@ -740,7 +793,6 @@
+@@ -740,7 +793,6 @@ CONFIG_I2C_AT91=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
-@@ -748,6 +800,12 @@
+@@ -748,6 +800,12 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
-@@ -760,7 +818,6 @@
+@@ -760,7 +818,6 @@ CONFIG_USB=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-@@ -769,7 +826,8 @@
+@@ -769,7 +826,8 @@ CONFIG_USB_DEVICEFS=y
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
-@@ -821,6 +879,7 @@
+@@ -821,6 +879,7 @@ CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
-@@ -858,6 +917,7 @@
+@@ -858,6 +917,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-@@ -867,6 +927,7 @@
+@@ -867,6 +927,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
-@@ -903,7 +964,6 @@
+@@ -903,7 +964,6 @@ CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_AT91=m
#
# Real Time Clock
-@@ -973,7 +1033,6 @@
+@@ -973,7 +1033,6 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
-@@ -1045,6 +1104,11 @@
+@@ -1045,6 +1104,11 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
-@@ -1056,28 +1120,30 @@
+@@ -1056,28 +1120,30 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-@@ -1097,9 +1163,12 @@
+@@ -1097,9 +1163,12 @@ CONFIG_DEBUG_LL=y
#
# Library routines
#
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22-rc5.new/arch/arm/configs/at91sam9263ek_defconfig
---- linux-2.6.22-rc5/arch/arm/configs/at91sam9263ek_defconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/configs/at91sam9263ek_defconfig 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/configs/at91sam9263ek_defconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/configs/at91sam9263ek_defconfig
++++ linux-2.6.22.19/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,11 +1,14 @@
#
# Automatically generated make config: don't edit
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
-@@ -15,6 +18,7 @@
+@@ -15,6 +18,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-@@ -33,6 +37,7 @@
+@@ -33,6 +37,7 @@ CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-@@ -41,6 +46,7 @@
+@@ -41,6 +46,7 @@ CONFIG_SYSVIPC=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-@@ -120,6 +126,7 @@
+@@ -120,6 +126,7 @@ CONFIG_ARCH_AT91=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
-@@ -152,6 +159,7 @@
+@@ -152,6 +159,7 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y
# AT91 Feature Selections
#
# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
#
# Processor Type
-@@ -174,6 +182,7 @@
+@@ -174,6 +182,7 @@ CONFIG_CPU_CP15_MMU=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
#
# Bus support
-@@ -201,6 +210,7 @@
+@@ -201,6 +210,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
-@@ -211,6 +221,7 @@
+@@ -211,6 +221,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
-@@ -236,7 +247,6 @@
+@@ -236,7 +247,6 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
#
# Networking
-@@ -333,6 +343,7 @@
+@@ -333,6 +343,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
-@@ -430,6 +441,7 @@
+@@ -430,6 +441,7 @@ CONFIG_MTD_NAND_AT91=y
#
# Plug and Play support
#
#
# Block devices
-@@ -443,7 +455,6 @@
+@@ -443,7 +455,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-@@ -531,6 +542,7 @@
+@@ -531,6 +542,7 @@ CONFIG_NETDEVICES=y
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-@@ -685,6 +697,7 @@
+@@ -685,6 +697,7 @@ CONFIG_I2C_CHARDEV=y
# I2C Hardware Bus support
#
CONFIG_I2C_AT91=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
-@@ -722,6 +735,7 @@
+@@ -722,6 +735,7 @@ CONFIG_SPI_ATMEL=y
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
-@@ -737,7 +751,11 @@
+@@ -737,7 +751,11 @@ CONFIG_SPI_ATMEL=y
#
# Misc devices
#
#
# LED devices
-@@ -766,15 +784,23 @@
+@@ -766,15 +784,23 @@ CONFIG_SPI_ATMEL=y
#
# Graphics support
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-@@ -789,7 +815,6 @@
+@@ -789,7 +815,6 @@ CONFIG_DUMMY_CONSOLE=y
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
-@@ -800,6 +825,7 @@
+@@ -800,6 +825,7 @@ CONFIG_DUMMY_CONSOLE=y
# HID Devices
#
CONFIG_HID=y
#
# USB support
-@@ -814,9 +840,7 @@
+@@ -814,9 +840,7 @@ CONFIG_USB=y
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_OTG is not set
#
-@@ -824,7 +848,8 @@
+@@ -824,7 +848,8 @@ CONFIG_USB_DEVICEFS=y
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
-@@ -877,6 +902,7 @@
+@@ -877,6 +902,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
-@@ -914,6 +940,7 @@
+@@ -914,6 +940,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-@@ -923,6 +950,7 @@
+@@ -923,6 +950,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
-@@ -959,7 +987,6 @@
+@@ -959,7 +987,6 @@ CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_AT91=m
#
# Real Time Clock
-@@ -1136,15 +1163,16 @@
+@@ -1136,15 +1163,16 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-@@ -1155,6 +1183,7 @@
+@@ -1155,6 +1183,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
-@@ -1180,5 +1209,7 @@
+@@ -1180,5 +1209,7 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig linux-2.6.22-rc5.new/arch/arm/configs/cam60_defconfig
---- linux-2.6.22-rc5/arch/arm/configs/cam60_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/configs/cam60_defconfig 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/configs/cam60_defconfig
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/configs/cam60_defconfig
@@ -0,0 +1,954 @@
+#
+# Automatically generated make config: don't edit
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
-diff -urN linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig linux-2.6.22-rc5.new/arch/arm/configs/kb9202_defconfig
---- linux-2.6.22-rc5/arch/arm/configs/kb9202_defconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/configs/kb9202_defconfig 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/configs/kb9202_defconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/configs/kb9202_defconfig
++++ linux-2.6.22.19/arch/arm/configs/kb9202_defconfig
@@ -1,19 +1,31 @@
#
# Automatically generated make config: don't edit
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-@@ -21,54 +33,103 @@
+@@ -21,54 +33,103 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
-@@ -76,34 +137,52 @@
+@@ -76,34 +137,52 @@ CONFIG_KMOD=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
#
# Processor Features
-@@ -112,24 +191,44 @@
+@@ -112,24 +191,44 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
-@@ -138,8 +237,10 @@
+@@ -138,8 +237,10 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
#
# Floating point emulation
-@@ -150,6 +251,7 @@
+@@ -150,6 +251,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 roo
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
#
# Userspace binary formats
-@@ -165,6 +267,96 @@
+@@ -165,6 +267,96 @@ CONFIG_BINFMT_MISC=y
# CONFIG_PM is not set
#
# Device Drivers
#
-@@ -173,13 +365,95 @@
+@@ -173,13 +365,95 @@ CONFIG_BINFMT_MISC=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Parallel port support
-@@ -189,6 +463,7 @@
+@@ -189,6 +463,7 @@ CONFIG_DEBUG_DRIVER=y
#
# Plug and Play support
#
#
# Block devices
-@@ -196,28 +471,27 @@
+@@ -196,28 +471,27 @@ CONFIG_DEBUG_DRIVER=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_SCSI_PROC_FS=y
#
-@@ -233,97 +507,61 @@
+@@ -233,97 +507,61 @@ CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
-@@ -331,6 +569,11 @@
+@@ -331,6 +569,11 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-@@ -357,11 +600,20 @@
+@@ -357,11 +600,20 @@ CONFIG_ARM_AT91_ETHER=y
# CONFIG_NET_RADIO is not set
#
#
# ISDN subsystem
-@@ -372,6 +624,7 @@
+@@ -372,6 +624,7 @@ CONFIG_ARM_AT91_ETHER=y
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
-@@ -397,9 +650,7 @@
+@@ -397,9 +650,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# Hardware I/O ports
#
# CONFIG_GAMEPORT is not set
#
-@@ -408,6 +659,7 @@
+@@ -408,6 +659,7 @@ CONFIG_SERIO=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
-@@ -420,11 +672,11 @@
+@@ -420,11 +672,11 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
#
# IPMI
-@@ -435,21 +687,23 @@
+@@ -435,21 +687,23 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
#
# I2C support
-@@ -457,10 +711,50 @@
+@@ -457,10 +711,50 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_I2C is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-@@ -469,17 +763,57 @@
+@@ -469,17 +763,57 @@ CONFIG_LEGACY_PTY_COUNT=256
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Sound
-@@ -487,82 +821,98 @@
+@@ -487,82 +821,98 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
#
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
-@@ -580,12 +930,23 @@
+@@ -580,12 +930,23 @@ CONFIG_USB_STORAGE_DEBUG=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
#
# USB DSL modem support
-@@ -599,36 +960,51 @@
+@@ -599,36 +960,51 @@ CONFIG_USB_STORAGE_DEBUG=y
#
# MMC/SD Card support
#
#
# CD-ROM/DVD Filesystems
-@@ -643,25 +1019,40 @@
+@@ -643,25 +1019,40 @@ CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
-@@ -675,16 +1066,23 @@
+@@ -675,16 +1066,23 @@ CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
#
# Partition Types
-@@ -734,26 +1132,51 @@
+@@ -734,26 +1132,51 @@ CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-@@ -766,7 +1189,43 @@
+@@ -766,7 +1189,43 @@ CONFIG_DEBUG_LL=y
#
# Cryptographic options
#
#
# Hardware crypto devices
-@@ -775,6 +1234,14 @@
+@@ -775,6 +1234,14 @@ CONFIG_DEBUG_LL=y
#
# Library routines
#
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200.c 2007-07-29 05:23:04.000000000 +0200
-@@ -267,6 +267,33 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91rm9200.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91rm9200.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91rm9200.c
+@@ -267,6 +267,33 @@ static void at91rm9200_reset(void)
/* --------------------------------------------------------------------
* AT91RM9200 processor initialization
* -------------------------------------------------------------------- */
void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-@@ -288,6 +315,9 @@
+@@ -288,6 +315,9 @@ void __init at91rm9200_initialize(unsign
/* Initialize GPIO subsystem */
at91_gpio_init(at91rm9200_gpio, banks);
}
-@@ -301,28 +331,28 @@
+@@ -301,28 +331,28 @@ void __init at91rm9200_initialize(unsign
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91rm9200_devices.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 05:23:04.000000000 +0200
-@@ -477,7 +477,18 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -477,7 +477,18 @@ void __init at91_add_device_i2c(void) {}
* SPI
* -------------------------------------------------------------------- */
static u64 spi_dmamask = 0xffffffffUL;
static struct resource spi_resources[] = {
-@@ -494,7 +505,7 @@
+@@ -494,7 +505,7 @@ static struct resource spi_resources[] =
};
static struct platform_device at91rm9200_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
-@@ -603,6 +614,32 @@
+@@ -603,6 +614,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260.c 2007-07-29 05:23:04.000000000 +0200
-@@ -269,6 +269,33 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9260.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9260.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9260.c
+@@ -269,6 +269,33 @@ static void at91sam9260_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
-@@ -315,6 +342,9 @@
+@@ -315,6 +342,9 @@ void __init at91sam9260_initialize(unsig
/* Register GPIO subsystem */
at91_gpio_init(at91sam9260_gpio, 3);
}
/* --------------------------------------------------------------------
-@@ -327,30 +357,30 @@
+@@ -327,30 +357,30 @@ void __init at91sam9260_initialize(unsig
static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9260_devices.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9260_devices.c 2007-07-29 05:23:04.000000000 +0200
-@@ -524,6 +524,32 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9260_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9260_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9260_devices.c
+@@ -524,6 +524,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261.c 2007-07-29 05:23:04.000000000 +0200
-@@ -247,6 +247,28 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9261.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9261.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9261.c
+@@ -247,6 +247,28 @@ static void at91sam9261_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9261 processor initialization
* -------------------------------------------------------------------- */
-@@ -267,6 +289,9 @@
+@@ -267,6 +289,9 @@ void __init at91sam9261_initialize(unsig
/* Register GPIO subsystem */
at91_gpio_init(at91sam9261_gpio, 3);
}
/* --------------------------------------------------------------------
-@@ -279,25 +304,25 @@
+@@ -279,25 +304,25 @@ void __init at91sam9261_initialize(unsig
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
3, /* LCD Controller */
0,
0,
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9261_devices.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9261_devices.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9261_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9261_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,6 +14,9 @@
#include <asm/mach/map.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
-@@ -522,6 +525,32 @@
+@@ -522,6 +525,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263.c 2007-07-29 05:23:04.000000000 +0200
-@@ -273,6 +273,28 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9263.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9263.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9263.c
+@@ -273,6 +273,28 @@ static void at91sam9263_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
* -------------------------------------------------------------------- */
-@@ -292,6 +314,9 @@
+@@ -292,6 +314,9 @@ void __init at91sam9263_initialize(unsig
/* Register GPIO subsystem */
at91_gpio_init(at91sam9263_gpio, 5);
}
/* --------------------------------------------------------------------
-@@ -304,34 +329,34 @@
+@@ -304,34 +329,34 @@ void __init at91sam9263_initialize(unsig
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
};
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9263_devices.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9263_devices.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9263_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9263_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,6 +13,9 @@
#include <asm/mach/map.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
-@@ -625,6 +628,56 @@
+@@ -625,6 +628,56 @@ void __init at91_add_device_ac97(struct
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
-@@ -715,6 +768,32 @@
+@@ -715,6 +768,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl.c 2007-07-29 05:23:04.000000000 +0200
-@@ -246,6 +246,28 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9rl.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl.c
+@@ -246,6 +246,28 @@ static void at91sam9rl_reset(void)
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
* -------------------------------------------------------------------- */
-@@ -284,6 +306,9 @@
+@@ -284,6 +306,9 @@ void __init at91sam9rl_initialize(unsign
/* Register GPIO subsystem */
at91_gpio_init(at91sam9rl_gpio, 4);
}
/* --------------------------------------------------------------------
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/at91sam9rl_devices.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/at91sam9rl_devices.c 2007-07-29 05:23:04.000000000 +0200
-@@ -370,6 +370,32 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91sam9rl_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91sam9rl_devices.c
+@@ -370,6 +370,32 @@ void __init at91_init_leds(u8 cpu_led, u
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-cam60.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-cam60.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-cam60.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/board-cam60.c
@@ -0,0 +1,148 @@
+/*
+ * KwikByte CAM60
+ .init_irq = cam60_init_irq,
+ .init_machine = cam60_board_init,
+MACHINE_END
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-chub.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-chub.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-chub.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-chub.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/board-chub.c
@@ -0,0 +1,132 @@
+/*
+ * linux/arch/arm/mach-at91/board-chub.c
+ .init_irq = chub_init_irq,
+ .init_machine = chub_board_init,
+MACHINE_END
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-csb337.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-csb337.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-csb337.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-csb337.c
++++ linux-2.6.22.19/arch/arm/mach-at91/board-csb337.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
-@@ -59,6 +60,7 @@
+@@ -59,6 +60,7 @@ static void __init csb337_map_io(void)
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Setup the serial ports and console */
at91_init_serial(&csb337_uart_config);
-@@ -149,6 +151,55 @@
+@@ -149,6 +151,55 @@ static struct platform_device csb_flash
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
static void __init csb337_board_init(void)
{
/* Serial */
-@@ -168,8 +219,12 @@
+@@ -168,8 +219,12 @@ static void __init csb337_board_init(voi
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
at91_add_device_mmc(0, &csb337_mmc_data);
}
MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-dk.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-dk.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-dk.c 2007-07-29 05:23:04.000000000 +0200
-@@ -73,6 +73,185 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-dk.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-dk.c
++++ linux-2.6.22.19/arch/arm/mach-at91/board-dk.c
+@@ -73,6 +73,185 @@ static void __init dk_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
-@@ -151,7 +330,7 @@
+@@ -151,7 +330,7 @@ static struct at91_nand_data __initdata
#define DK_FLASH_SIZE 0x200000
static struct physmap_flash_data dk_flash_data = {
};
static struct resource dk_flash_resource = {
-@@ -170,6 +349,13 @@
+@@ -170,6 +349,13 @@ static struct platform_device dk_flash =
.num_resources = 1,
};
static void __init dk_board_init(void)
{
-@@ -200,8 +386,10 @@
+@@ -200,8 +386,10 @@ static void __init dk_board_init(void)
at91_add_device_nand(&dk_nand_data);
/* NOR Flash */
platform_device_register(&dk_flash);
}
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-ek.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-ek.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-ek.c 2007-07-29 05:23:04.000000000 +0200
-@@ -73,6 +73,187 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-ek.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-ek.c
++++ linux-2.6.22.19/arch/arm/mach-at91/board-ek.c
+@@ -73,6 +73,187 @@ static void __init ek_init_irq(void)
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
-@@ -113,7 +294,7 @@
+@@ -113,7 +294,7 @@ static struct spi_board_info ek_spi_devi
#define EK_FLASH_SIZE 0x200000
static struct physmap_flash_data ek_flash_data = {
};
static struct resource ek_flash_resource = {
-@@ -132,6 +313,18 @@
+@@ -132,6 +313,18 @@ static struct platform_device ek_flash =
.num_resources = 1,
};
static void __init ek_board_init(void)
{
-@@ -158,8 +351,10 @@
+@@ -158,8 +351,10 @@ static void __init ek_board_init(void)
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
}
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-kb9202.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-kb9202.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-kb9202.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-kb9202.c
++++ linux-2.6.22.19/arch/arm/mach-at91/board-kb9202.c
@@ -37,6 +37,8 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-@@ -111,6 +113,48 @@
+@@ -111,6 +113,48 @@ static struct at91_nand_data __initdata
.partition_info = nand_partitions,
};
static void __init kb9202_board_init(void)
{
/* Serial */
-@@ -129,6 +173,8 @@
+@@ -129,6 +173,8 @@ static void __init kb9202_board_init(voi
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
}
MACHINE_START(KB9200, "KB920x")
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9261ek.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9261ek.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-sam9261ek.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-sam9261ek.c
++++ linux-2.6.22.19/arch/arm/mach-at91/board-sam9261ek.c
@@ -27,6 +27,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/hardware.h>
#include <asm/setup.h>
-@@ -251,6 +254,7 @@
+@@ -251,6 +254,7 @@ static struct spi_board_info ek_spi_devi
.bus_num = 0,
.platform_data = &ads_info,
.irq = AT91SAM9261_ID_IRQ0,
},
#endif
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-@@ -271,6 +275,65 @@
+@@ -271,6 +275,65 @@ static struct spi_board_info ek_spi_devi
};
static void __init ek_board_init(void)
{
/* Serial */
-@@ -296,6 +359,8 @@
+@@ -296,6 +359,8 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
#endif
}
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/board-sam9263ek.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/board-sam9263ek.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-sam9263ek.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/board-sam9263ek.c
++++ linux-2.6.22.19/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,6 +26,9 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <asm/hardware.h>
#include <asm/setup.h>
-@@ -202,6 +205,65 @@
+@@ -202,6 +205,65 @@ static struct at91_nand_data __initdata
/*
* AC97
*/
static struct atmel_ac97_data ek_ac97_data = {
-@@ -230,6 +292,8 @@
+@@ -230,6 +292,8 @@ static void __init ek_board_init(void)
at91_add_device_nand(&ek_nand_data);
/* I2C */
at91_add_device_i2c();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
}
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/clock.c linux-2.6.22-rc5.new/arch/arm/mach-at91/clock.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/clock.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/clock.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/clock.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/clock.c
++++ linux-2.6.22.19/arch/arm/mach-at91/clock.c
@@ -32,6 +32,7 @@
#include <asm/arch/cpu.h>
/*
-@@ -254,6 +255,23 @@
+@@ -254,6 +255,23 @@ EXPORT_SYMBOL(clk_get_rate);
/*------------------------------------------------------------------------*/
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/*
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/generic.h linux-2.6.22-rc5.new/arch/arm/mach-at91/generic.h
---- linux-2.6.22-rc5/arch/arm/mach-at91/generic.h 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/generic.h 2007-07-29 05:23:04.000000000 +0200
-@@ -36,6 +36,7 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/generic.h
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/generic.h
++++ linux-2.6.22.19/arch/arm/mach-at91/generic.h
+@@ -36,6 +36,7 @@ extern void __init at91_clock_associate(
/* Power Management */
extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c linux-2.6.22-rc5.new/arch/arm/mach-at91/ics1523.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/ics1523.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/ics1523.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/ics1523.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/ics1523.c
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-at91rm9200/ics1523.c
+
+ return ack;
+}
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig linux-2.6.22-rc5.new/arch/arm/mach-at91/Kconfig
---- linux-2.6.22-rc5/arch/arm/mach-at91/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/Kconfig 2007-07-29 05:23:04.000000000 +0200
-@@ -97,6 +97,12 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Kconfig
++++ linux-2.6.22.19/arch/arm/mach-at91/Kconfig
+@@ -97,6 +97,12 @@ config MACH_KAFA
help
Select this if you are using Sperry-Sun's KAFA board.
endif
# ----------------------------------------------------------
-@@ -121,6 +127,13 @@
+@@ -121,6 +127,13 @@ config MACH_AT91SAM9260EK
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
endif
# ----------------------------------------------------------
-@@ -184,6 +197,20 @@
+@@ -184,6 +197,20 @@ config MTD_NAND_AT91_BUSWIDTH_16
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
# ----------------------------------------------------------
comment "AT91 Feature Selections"
-@@ -194,6 +221,20 @@
+@@ -194,6 +221,20 @@ config AT91_PROGRAMMABLE_CLOCKS
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
endmenu
endif
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/Makefile linux-2.6.22-rc5.new/arch/arm/mach-at91/Makefile
---- linux-2.6.22-rc5/arch/arm/mach-at91/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/Makefile 2007-07-29 05:23:04.000000000 +0200
-@@ -8,6 +8,8 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.22.19/arch/arm/mach-at91/Makefile
+@@ -8,6 +8,8 @@ obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-@@ -26,10 +28,12 @@
+@@ -26,10 +28,12 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-@@ -51,7 +55,7 @@
+@@ -51,7 +55,7 @@ led-$(CONFIG_MACH_KAFA) += leds.o
obj-$(CONFIG_LEDS) += $(led-y)
# VGA support
ifeq ($(CONFIG_PM_DEBUG),y)
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/pm.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c 2007-07-29 05:23:04.000000000 +0200
-@@ -63,6 +63,7 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/pm.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/pm.c
++++ linux-2.6.22.19/arch/arm/mach-at91/pm.c
+@@ -63,6 +63,7 @@ static int at91_pm_set_target(suspend_st
* Verify that all the clocks are correct before entering
* slow-clock mode.
*/
static int at91_pm_verify_clocks(void)
{
unsigned long scsr;
-@@ -103,20 +104,15 @@
+@@ -103,20 +104,15 @@ static int at91_pm_verify_clocks(void)
}
/*
static void (*slow_clock)(void);
-@@ -205,16 +201,23 @@
+@@ -205,16 +201,23 @@ static struct pm_ops at91_pm_ops ={
.enter = at91_pm_enter,
};
#endif
/* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c.orig
---- linux-2.6.22-rc5/arch/arm/mach-at91/pm.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm.c.orig 2007-06-17 04:09:12.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/pm.c.orig
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/pm.c.orig
@@ -0,0 +1,227 @@
+/*
+ * arch/arm/mach-at91/pm.c
+ return 0;
+}
+arch_initcall(at91_pm_init);
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S linux-2.6.22-rc5.new/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.22-rc5/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/pm_slowclock.S 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/pm_slowclock.S
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+
+ENTRY(at91rm9200_slow_clock_sz)
+ .word .-at91rm9200_slow_clock
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.c
---- linux-2.6.22-rc5/arch/arm/mach-at91/tclib.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.c 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/tclib.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/tclib.c
@@ -0,0 +1,17 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+ blocks = tcblocks;
+ nblocks = n;
+}
-diff -urN linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.h
---- linux-2.6.22-rc5/arch/arm/mach-at91/tclib.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/arch/arm/mach-at91/tclib.h 2007-07-29 05:23:04.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/tclib.h
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/tclib.h
@@ -0,0 +1,11 @@
+
+#define TC_PER_TCB 3
+};
+
+extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
-diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h
---- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_mci.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h Tue May 8 12:13:31 2007
+Index: linux-2.6.22.19/include/asm-arm/arch-at91/at91_mci.h
+===================================================================
+--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/at91_mci.h
++++ linux-2.6.22.19/include/asm-arm/arch-at91/at91_mci.h
@@ -26,6 +26,9 @@
#define AT91_MCI_MR 0x04 /* Mode Register */
#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91_pmc.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h Fri May 11 16:45:00 2007
+Index: linux-2.6.22.19/include/asm-arm/arch-at91/at91_pmc.h
+===================================================================
+--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/at91_pmc.h
++++ linux-2.6.22.19/include/asm-arm/arch-at91/at91_pmc.h
@@ -37,7 +37,9 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.22-rc1/include/asm-arm/arch-at91/at91sam9260_matrix.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h Fri May 11 16:20:33 2007
+Index: linux-2.6.22.19/include/asm-arm/arch-at91/at91sam9260_matrix.h
+===================================================================
+--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/at91sam9260_matrix.h
++++ linux-2.6.22.19/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -67,7 +67,7 @@
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h
---- linux-2.6.22-rc1/include/asm-arm/arch-at91/board.h Thu May 17 12:13:17 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/board.h Thu May 10 12:21:10 2007
-@@ -124,9 +124,21 @@
+Index: linux-2.6.22.19/include/asm-arm/arch-at91/board.h
+===================================================================
+--- linux-2.6.22.19.orig/include/asm-arm/arch-at91/board.h
++++ linux-2.6.22.19/include/asm-arm/arch-at91/board.h
+@@ -124,9 +124,21 @@ struct atmel_ac97_data {
};
extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
+
#endif
-diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.22-rc1/include/asm-arm/arch-at91/ics1523.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h Mon May 14 13:49:47 2007
+Index: linux-2.6.22.19/include/asm-arm/arch-at91/ics1523.h
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/include/asm-arm/arch-at91/ics1523.h
@@ -0,0 +1,154 @@
+//*----------------------------------------------------------------------------
+//* ATMEL Microcontroller Software Support - ROUSSET -
+int at91_ics1523_init(void);
+
+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h
---- linux-2.6.22-rc1/include/asm-arm/arch-at91/spi.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h Mon May 14 13:49:47 2007
+Index: linux-2.6.22.19/include/asm-arm/arch-at91/spi.h
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/include/asm-arm/arch-at91/spi.h
@@ -0,0 +1,54 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
+extern int spi_transfer(struct spi_transfer_list* list);
+
+#endif
-diff -urN -x CVS linux-2.6.22-rc1/include/linux/clk.h linux-2.6-stable/include/linux/clk.h
---- linux-2.6.22-rc1/include/linux/clk.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/clk.h Tue May 8 12:13:31 2007
-@@ -121,4 +121,24 @@
+Index: linux-2.6.22.19/include/linux/clk.h
+===================================================================
+--- linux-2.6.22.19.orig/include/linux/clk.h
++++ linux-2.6.22.19/include/linux/clk.h
+@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru
*/
struct clk *clk_get_parent(struct clk *clk);
+int clk_must_disable(struct clk *clk);
+
#endif
-diff -urN -x CVS linux-2.6.22-rc1/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h
---- linux-2.6.22-rc1/include/linux/i2c-id.h Thu May 17 12:13:23 2007
-+++ linux-2.6-stable/include/linux/i2c-id.h Mon May 14 10:18:35 2007
+Index: linux-2.6.22.19/include/linux/i2c-id.h
+===================================================================
+--- linux-2.6.22.19.orig/include/linux/i2c-id.h
++++ linux-2.6.22.19/include/linux/i2c-id.h
@@ -203,6 +203,7 @@
/* --- PCA 9564 based algorithms */
/* --- ACPI Embedded controller algorithms */
#define I2C_HW_ACPI_EC 0x1f0000
-diff -urN -x CVS linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.22-rc1/sound/soc/at91/eti_b1_wm8731.c Thu May 17 12:13:36 2007
-+++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c Mon May 14 10:19:04 2007
+Index: linux-2.6.22.19/sound/soc/at91/eti_b1_wm8731.c
+===================================================================
+--- linux-2.6.22.19.orig/sound/soc/at91/eti_b1_wm8731.c
++++ linux-2.6.22.19/sound/soc/at91/eti_b1_wm8731.c
@@ -34,8 +34,7 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
static struct clk *pck1_clk;
static struct clk *pllb_clk;
-@@ -277,7 +269,6 @@
+@@ -277,7 +269,6 @@ static struct platform_device *eti_b1_sn
static int __init eti_b1_init(void)
{
int ret;
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -311,19 +302,12 @@
+@@ -311,19 +302,12 @@ static int __init eti_b1_init(void)
goto fail_io_unmap;
}
/*
* Set PCK1 parent to PLLB and its rate to 12 Mhz.
-diff -urN linux-2.6.22-rc5/drivers/char/at91_spi.c linux-2.6.22-rc5.new/drivers/char/at91_spi.c
---- linux-2.6.22-rc5/drivers/char/at91_spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/char/at91_spi.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/char/at91_spi.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/char/at91_spi.c
@@ -0,0 +1,336 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN linux-2.6.22-rc5/drivers/char/at91_spidev.c linux-2.6.22-rc5.new/drivers/char/at91_spidev.c
---- linux-2.6.22-rc5/drivers/char/at91_spidev.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/char/at91_spidev.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/char/at91_spidev.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/char/at91_spidev.c
@@ -0,0 +1,236 @@
+/*
+ * User-space interface to the SPI bus on Atmel AT91RM9200
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN linux-2.6.22-rc5/drivers/char/Kconfig linux-2.6.22-rc5.new/drivers/char/Kconfig
---- linux-2.6.22-rc5/drivers/char/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/char/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -1083,5 +1083,21 @@
+Index: linux-2.6.22.19/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/char/Kconfig
++++ linux-2.6.22.19/drivers/char/Kconfig
+@@ -1083,5 +1083,21 @@ config DEVPORT
source "drivers/s390/char/Kconfig"
+
endmenu
-diff -urN linux-2.6.22-rc5/drivers/char/Makefile linux-2.6.22-rc5.new/drivers/char/Makefile
---- linux-2.6.22-rc5/drivers/char/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/char/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -93,6 +93,8 @@
+Index: linux-2.6.22.19/drivers/char/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/char/Makefile
++++ linux-2.6.22.19/drivers/char/Makefile
+@@ -93,6 +93,8 @@ obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
-diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.22-rc5/drivers/i2c/busses/i2c-at91.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-at91.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/i2c/busses/i2c-at91.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/i2c/busses/i2c-at91.c
++++ linux-2.6.22.19/drivers/i2c/busses/i2c-at91.c
@@ -31,8 +31,11 @@
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
static struct clk *twi_clk;
static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
+@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo
at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
/* Calcuate clock dividers */
cdiv = cdiv + 1; /* round up */
ckdiv = 0;
while (cdiv > 255) {
-@@ -61,11 +64,12 @@
+@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo
cdiv = cdiv >> 1;
}
}
at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.22-rc5/drivers/i2c/busses/i2c-pca.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/i2c/busses/i2c-pca.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/i2c/busses/i2c-pca.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/i2c/busses/i2c-pca.c
@@ -0,0 +1,213 @@
+/*
+ * Platform driver for PCA9564 I2C bus controller.
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("PCA9564 platform driver");
+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Kconfig linux-2.6.22-rc5.new/drivers/i2c/busses/Kconfig
---- linux-2.6.22-rc5/drivers/i2c/busses/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/i2c/busses/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -80,6 +80,14 @@
+Index: linux-2.6.22.19/drivers/i2c/busses/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/i2c/busses/Kconfig
++++ linux-2.6.22.19/drivers/i2c/busses/Kconfig
+@@ -80,6 +80,14 @@ config I2C_AT91
This supports the use of the I2C interface on Atmel AT91
processors.
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
depends on SOC_AU1550 || SOC_AU1200
-@@ -598,6 +606,14 @@
+@@ -598,6 +606,14 @@ config I2C_VOODOO3
This driver can also be built as a module. If so, the module
will be called i2c-voodoo3.
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
depends on ISA
-diff -urN linux-2.6.22-rc5/drivers/i2c/busses/Makefile linux-2.6.22-rc5.new/drivers/i2c/busses/Makefile
---- linux-2.6.22-rc5/drivers/i2c/busses/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/i2c/busses/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -30,6 +30,7 @@
+Index: linux-2.6.22.19/drivers/i2c/busses/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/i2c/busses/Makefile
++++ linux-2.6.22.19/drivers/i2c/busses/Makefile
+@@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
-diff -urN linux-2.6.22-rc5/drivers/leds/Kconfig linux-2.6.22-rc5.new/drivers/leds/Kconfig
---- linux-2.6.22-rc5/drivers/leds/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/leds/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -77,6 +77,13 @@
+Index: linux-2.6.22.19/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/leds/Kconfig
++++ linux-2.6.22.19/drivers/leds/Kconfig
+@@ -77,6 +77,13 @@ config LEDS_NET48XX
This option enables support for the Soekris net4801 and net4826 error
LED.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
depends on LEDS_CLASS && SCx200_GPIO
-diff -urN linux-2.6.22-rc5/drivers/leds/leds-at91.c linux-2.6.22-rc5.new/drivers/leds/leds-at91.c
---- linux-2.6.22-rc5/drivers/leds/leds-at91.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/leds/leds-at91.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/leds/leds-at91.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/leds/leds-at91.c
@@ -0,0 +1,140 @@
+/*
+ * AT91 GPIO based LED driver
+MODULE_DESCRIPTION("AT91 GPIO LED driver");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22-rc5/drivers/leds/Makefile linux-2.6.22-rc5.new/drivers/leds/Makefile
---- linux-2.6.22-rc5/drivers/leds/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/leds/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -16,6 +16,7 @@
+Index: linux-2.6.22.19/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/leds/Makefile
++++ linux-2.6.22.19/drivers/leds/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net4
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff -urN linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c linux-2.6.22-rc5.new/drivers/mmc/host/at91_mci.c
---- linux-2.6.22-rc5/drivers/mmc/host/at91_mci.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/mmc/host/at91_mci.c 2007-07-29 05:57:56.000000000 +0200
+Index: linux-2.6.22.19/drivers/mmc/host/at91_mci.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mmc/host/at91_mci.c
++++ linux-2.6.22.19/drivers/mmc/host/at91_mci.c
@@ -85,7 +85,7 @@
#define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
#define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-@@ -560,9 +560,7 @@
+@@ -560,9 +560,7 @@ static void at91mci_completed_command(st
pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
cmd->error = MMC_ERR_NONE;
}
-@@ -663,15 +661,15 @@
+@@ -663,15 +661,15 @@ static irqreturn_t at91_mci_irq(int irq,
int_status = at91_mci_read(host, AT91_MCI_SR);
int_mask = at91_mci_read(host, AT91_MCI_IMR);
if (int_status & AT91_MCI_UNRE)
pr_debug("MMC: Underrun error\n");
if (int_status & AT91_MCI_OVRE)
-@@ -819,7 +817,7 @@
+@@ -819,7 +817,7 @@ static int __init at91_mci_probe(struct
mmc->f_min = 375000;
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->max_blk_size = 4095;
mmc->max_blk_count = mmc->max_req_size;
-@@ -893,6 +891,8 @@
+@@ -893,6 +891,8 @@ static int __init at91_mci_probe(struct
mmc_add_host(mmc);
/*
* monitor card insertion/removal if we can
*/
-@@ -922,6 +922,8 @@
+@@ -922,6 +922,8 @@ static int __exit at91_mci_remove(struct
host = mmc_priv(mmc);
if (host->present != -1) {
free_irq(host->board->det_pin, host);
cancel_delayed_work(&host->mmc->detect);
-@@ -949,8 +951,12 @@
+@@ -949,8 +951,12 @@ static int __exit at91_mci_remove(struct
static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
if (mmc)
ret = mmc_suspend_host(mmc, state);
-@@ -960,8 +966,12 @@
+@@ -960,8 +966,12 @@ static int at91_mci_suspend(struct platf
static int at91_mci_resume(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
if (mmc)
ret = mmc_resume_host(mmc);
-diff -urN linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c linux-2.6.22-rc5.new/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.22-rc5/drivers/mtd/devices/at91_dataflash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/mtd/devices/at91_dataflash.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
@@ -0,0 +1,667 @@
+/*
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Kconfig linux-2.6.22-rc5.new/drivers/mtd/devices/Kconfig
---- linux-2.6.22-rc5/drivers/mtd/devices/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/mtd/devices/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -269,5 +269,11 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/Kconfig
++++ linux-2.6.22.19/drivers/mtd/devices/Kconfig
+@@ -269,5 +269,11 @@ config MTD_DOCPROBE_55AA
LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
you have managed to wipe the first block.
+ If you have such a board, say 'Y'.
+endmenu
-diff -urN linux-2.6.22-rc5/drivers/mtd/devices/Makefile linux-2.6.22-rc5.new/drivers/mtd/devices/Makefile
---- linux-2.6.22-rc5/drivers/mtd/devices/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/mtd/devices/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -18,3 +18,4 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/Makefile
++++ linux-2.6.22.19/drivers/mtd/devices/Makefile
+@@ -18,3 +18,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN linux-2.6.22-rc5/drivers/net/arm/at91_ether.c linux-2.6.22-rc5.new/drivers/net/arm/at91_ether.c
---- linux-2.6.22-rc5/drivers/net/arm/at91_ether.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/net/arm/at91_ether.c 2007-07-29 05:55:39.000000000 +0200
-@@ -894,6 +894,7 @@
+Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c
++++ linux-2.6.22.19/drivers/net/arm/at91_ether.c
+@@ -894,6 +894,7 @@ static void at91ether_rx(struct net_devi
skb_reserve(skb, 2);
memcpy(skb_put(skb, pktlen), p_recv, pktlen);
skb->protocol = eth_type_trans(skb, dev);
dev->last_rx = jiffies;
lp->stats.rx_bytes += pktlen;
-@@ -978,14 +979,22 @@
+@@ -978,14 +979,22 @@ static int __init at91ether_setup(unsign
struct net_device *dev;
struct at91_private *lp;
unsigned int val;
SET_MODULE_OWNER(dev);
/* Install the interrupt handler */
-@@ -1058,12 +1067,12 @@
+@@ -1058,12 +1067,12 @@ static int __init at91ether_setup(unsign
lp->phy_address = phy_address; /* MDI address of PHY */
/* Register the network interface */
}
/* Determine current link speed */
-diff -urN linux-2.6.22-rc5/drivers/serial/atmel_serial.c linux-2.6.22-rc5.new/drivers/serial/atmel_serial.c
---- linux-2.6.22-rc5/drivers/serial/atmel_serial.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/serial/atmel_serial.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/serial/atmel_serial.c
++++ linux-2.6.22.19/drivers/serial/atmel_serial.c
@@ -7,6 +7,8 @@
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
/*
* We wrap our port structure around the generic uart_port.
*/
-@@ -114,10 +129,20 @@
+@@ -114,10 +129,20 @@ struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
unsigned short suspended; /* is port suspended? */
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
#endif
-@@ -205,7 +230,12 @@
+@@ -205,7 +230,12 @@ static void atmel_stop_tx(struct uart_po
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
}
/*
-@@ -215,7 +245,17 @@
+@@ -215,7 +245,17 @@ static void atmel_start_tx(struct uart_p
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
}
/*
-@@ -225,7 +265,12 @@
+@@ -225,7 +265,12 @@ static void atmel_stop_rx(struct uart_po
{
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
}
/*
-@@ -248,6 +293,134 @@
+@@ -248,6 +293,134 @@ static void atmel_break_ctl(struct uart_
}
/*
* Characters received (called from interrupt handler)
*/
static void atmel_rx_chars(struct uart_port *port)
-@@ -349,6 +522,14 @@
+@@ -349,6 +522,14 @@ static irqreturn_t atmel_interrupt(int i
status = UART_GET_CSR(port);
pending = status & UART_GET_IMR(port);
while (pending) {
/* Interrupt receive */
if (pending & ATMEL_US_RXRDY)
atmel_rx_chars(port);
-@@ -363,6 +544,12 @@
+@@ -363,6 +544,12 @@ static irqreturn_t atmel_interrupt(int i
if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
wake_up_interruptible(&port->info->delta_msr_wait);
/* Interrupt transmit */
if (pending & ATMEL_US_TXRDY)
atmel_tx_chars(port);
-@@ -401,6 +588,47 @@
+@@ -401,6 +588,47 @@ static int atmel_startup(struct uart_por
}
/*
* If there is a specific "open" function (to register
* control line interrupts)
*/
-@@ -418,7 +646,15 @@
+@@ -418,7 +646,15 @@ static int atmel_startup(struct uart_por
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
return 0;
}
-@@ -431,6 +667,31 @@
+@@ -431,6 +667,31 @@ static void atmel_shutdown(struct uart_p
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
/*
* Disable all interrupts, port and break condition.
*/
UART_PUT_CR(port, ATMEL_US_RSTSTA);
-@@ -481,6 +742,7 @@
+@@ -481,6 +742,7 @@ static void atmel_serial_pm(struct uart_
*/
static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
-@@ -490,7 +752,7 @@
+@@ -490,7 +752,7 @@ static void atmel_set_termios(struct uar
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
quot /= 8;
mode |= ATMEL_US_USCLKS_MCK_DIV8;
}
-@@ -539,6 +801,9 @@
+@@ -539,6 +801,9 @@ static void atmel_set_termios(struct uar
if (termios->c_iflag & (BRKINT | PARMRK))
port->read_status_mask |= ATMEL_US_RXBRK;
/*
* Characters to ignore
*/
-@@ -717,6 +982,13 @@
+@@ -717,6 +982,13 @@ static void __devinit atmel_init_port(st
clk_enable(atmel_port->clk);
port->uartclk = clk_get_rate(atmel_port->clk);
}
}
/*
-@@ -893,7 +1165,8 @@
+@@ -893,7 +1165,8 @@ static int atmel_serial_suspend(struct p
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
enable_irq_wake(port->irq);
else {
uart_suspend_port(&atmel_uart, port);
-diff -urN linux-2.6.22-rc5/drivers/spi/Kconfig linux-2.6.22-rc5.new/drivers/spi/Kconfig
---- linux-2.6.22-rc5/drivers/spi/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/spi/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -55,6 +55,7 @@
+Index: linux-2.6.22.19/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/spi/Kconfig
++++ linux-2.6.22.19/drivers/spi/Kconfig
+@@ -55,6 +55,7 @@ comment "SPI Master Controller Drivers"
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on (ARCH_AT91 || AVR32) && SPI_MASTER
help
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
-@@ -100,6 +101,24 @@
+@@ -100,6 +101,24 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
config SPI_IMX
tristate "Freescale iMX SPI controller"
depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN linux-2.6.22-rc5/drivers/spi/Makefile linux-2.6.22-rc5.new/drivers/spi/Makefile
---- linux-2.6.22-rc5/drivers/spi/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/spi/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -23,6 +23,7 @@
+Index: linux-2.6.22.19/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/spi/Makefile
++++ linux-2.6.22.19/drivers/spi/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52x
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
-diff -urN linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c linux-2.6.22-rc5.new/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.22-rc5/drivers/spi/spi_at91_bitbang.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/spi/spi_at91_bitbang.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/spi/spi_at91_bitbang.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/spi/spi_at91_bitbang.c
@@ -0,0 +1,207 @@
+/*
+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c linux-2.6.22-rc5.new/drivers/usb/gadget/at91_udc.c
---- linux-2.6.22-rc5/drivers/usb/gadget/at91_udc.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/usb/gadget/at91_udc.c 2007-07-29 05:55:39.000000000 +0200
-@@ -1803,7 +1803,7 @@
+Index: linux-2.6.22.19/drivers/usb/gadget/at91_udc.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/usb/gadget/at91_udc.c
++++ linux-2.6.22.19/drivers/usb/gadget/at91_udc.c
+@@ -1803,7 +1803,7 @@ static int at91udc_suspend(struct platfo
*/
if ((!udc->suspended && udc->addr)
|| !wake
pullup(udc, 0);
wake = 0;
} else
-diff -urN linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c linux-2.6.22-rc5.new/drivers/usb/host/ohci-at91.c
---- linux-2.6.22-rc5/drivers/usb/host/ohci-at91.c 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/usb/host/ohci-at91.c 2007-07-29 05:55:39.000000000 +0200
-@@ -299,7 +299,7 @@
+Index: linux-2.6.22.19/drivers/usb/host/ohci-at91.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/usb/host/ohci-at91.c
++++ linux-2.6.22.19/drivers/usb/host/ohci-at91.c
+@@ -299,7 +299,7 @@ ohci_hcd_at91_drv_suspend(struct platfor
*
* REVISIT: some boards will be able to turn VBUS off...
*/
ohci_usb_reset (ohci);
at91_stop_clock();
}
-diff -urN linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c linux-2.6.22-rc5.new/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.22-rc5/drivers/video/backlight/kb920x_bl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/video/backlight/kb920x_bl.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/video/backlight/kb920x_bl.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/video/backlight/kb920x_bl.c
@@ -0,0 +1,164 @@
+/*
+ * Backlight Driver for KB9202
+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
+MODULE_DESCRIPTION("KB9202 Backlight Driver");
+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22-rc5/drivers/video/backlight/Kconfig linux-2.6.22-rc5.new/drivers/video/backlight/Kconfig
---- linux-2.6.22-rc5/drivers/video/backlight/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/video/backlight/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -71,3 +71,11 @@
+Index: linux-2.6.22.19/drivers/video/backlight/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/video/backlight/Kconfig
++++ linux-2.6.22.19/drivers/video/backlight/Kconfig
+@@ -71,3 +71,11 @@ config BACKLIGHT_CARILLO_RANCH
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
+ help
+ If you have a KwikByte KB9202 board, say Y to enable the
+ backlight driver.
-diff -urN linux-2.6.22-rc5/drivers/video/backlight/Makefile linux-2.6.22-rc5.new/drivers/video/backlight/Makefile
---- linux-2.6.22-rc5/drivers/video/backlight/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/video/backlight/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -7,3 +7,4 @@
+Index: linux-2.6.22.19/drivers/video/backlight/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/video/backlight/Makefile
++++ linux-2.6.22.19/drivers/video/backlight/Makefile
+@@ -7,3 +7,4 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_b
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN linux-2.6.22-rc5/drivers/video/Kconfig linux-2.6.22-rc5.new/drivers/video/Kconfig
---- linux-2.6.22-rc5/drivers/video/Kconfig 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/video/Kconfig 2007-07-29 05:55:39.000000000 +0200
-@@ -822,6 +822,17 @@
+Index: linux-2.6.22.19/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/video/Kconfig
++++ linux-2.6.22.19/drivers/video/Kconfig
+@@ -822,6 +822,17 @@ config FB_EPSON1355
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
-@@ -835,7 +846,7 @@
+@@ -835,7 +846,7 @@ config FB_S1D13XXX
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
-diff -urN linux-2.6.22-rc5/drivers/video/Makefile linux-2.6.22-rc5.new/drivers/video/Makefile
---- linux-2.6.22-rc5/drivers/video/Makefile 2007-06-17 04:09:12.000000000 +0200
-+++ linux-2.6.22-rc5.new/drivers/video/Makefile 2007-07-29 05:55:39.000000000 +0200
-@@ -87,7 +87,8 @@
+Index: linux-2.6.22.19/drivers/video/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/video/Makefile
++++ linux-2.6.22.19/drivers/video/Makefile
+@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364) += g36
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN linux-2.6.22-rc5/drivers/video/s1d15605fb.c linux-2.6.22-rc5.new/drivers/video/s1d15605fb.c
---- linux-2.6.22-rc5/drivers/video/s1d15605fb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22-rc5.new/drivers/video/s1d15605fb.c 2007-07-29 05:55:39.000000000 +0200
+Index: linux-2.6.22.19/drivers/video/s1d15605fb.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/video/s1d15605fb.c
@@ -0,0 +1,659 @@
+/*
+ * drivers/video/s1d15605.c
-diff -urN linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.22.1.old/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 06:33:09.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-29 06:39:45.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/boot/compressed/head-at91rm9200.S
++++ linux-2.6.22.19/arch/arm/boot/compressed/head-at91rm9200.S
@@ -67,6 +67,12 @@
cmp r7, r3
beq 99f
@ Ajeco 1ARM : 1075
mov r3, #(MACH_TYPE_ONEARM & 0xff)
orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/board-vlink.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-vlink.c 2007-07-29 06:40:47.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/board-vlink.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/board-vlink.c
@@ -0,0 +1,191 @@
+/*
+ * linux/arch/arm/mach-at91/board-vlink.c
+ .init_irq = vlink_init_irq,
+ .init_machine = vlink_board_init,
+MACHINE_END
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig linux-2.6.22.1/arch/arm/mach-at91/Kconfig
---- linux-2.6.22.1.old/arch/arm/mach-at91/Kconfig 2007-07-29 06:33:09.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig 2007-07-29 06:42:19.000000000 +0200
-@@ -103,6 +103,12 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Kconfig
++++ linux-2.6.22.19/arch/arm/mach-at91/Kconfig
+@@ -103,6 +103,12 @@ config MACH_CHUB
help
Select this if you are using Promwad's Chub board.
endif
# ----------------------------------------------------------
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile
---- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile 2007-07-29 06:33:09.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Makefile 2007-07-29 06:43:36.000000000 +0200
-@@ -29,6 +29,7 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.22.19/arch/arm/mach-at91/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_KB9200) += board-kb920
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_CHUB) += board-chub.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
# AT91SAM9260 board-specific support
-@@ -52,6 +53,7 @@
+@@ -52,6 +53,7 @@ led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
led-$(CONFIG_MACH_KAFA) += leds.o
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile
---- linux-2.6.22.1.old/arch/arm/mach-at91/Makefile 2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Makefile 2007-07-29 06:54:19.000000000 +0200
-@@ -53,7 +53,7 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/Makefile
++++ linux-2.6.22.19/arch/arm/mach-at91/Makefile
+@@ -53,7 +53,7 @@ led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
led-$(CONFIG_MACH_KAFA) += leds.o
obj-$(CONFIG_LEDS) += $(led-y)
# VGA support
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/vlink_leds.c linux-2.6.22.1/arch/arm/mach-at91/vlink_leds.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/vlink_leds.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/vlink_leds.c 2007-07-29 06:54:58.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/vlink_leds.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/arch/arm/mach-at91/vlink_leds.c
@@ -0,0 +1,105 @@
+/*
+ * LED driver for Atmel AT91-based boards.
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c linux-2.6.22.1/arch/arm/mach-at91/gpio.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/gpio.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/gpio.c 2007-07-29 07:03:30.000000000 +0200
+Index: linux-2.6.22.19/arch/arm/mach-at91/gpio.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/gpio.c
++++ linux-2.6.22.19/arch/arm/mach-at91/gpio.c
@@ -27,6 +27,7 @@
static struct at91_gpio_bank *gpio;
static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@
+@@ -71,9 +72,13 @@ int __init_or_module at91_set_GPIO_perip
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@
+@@ -130,10 +135,13 @@ int __init_or_module at91_set_gpio_input
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@
+@@ -151,10 +159,13 @@ int __init_or_module at91_set_gpio_outpu
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + PIO_PUDR);
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@
+@@ -262,6 +273,18 @@ int at91_get_gpio_value(unsigned pin)
}
EXPORT_SYMBOL(at91_get_gpio_value);
/*--------------------------------------------------------------------------*/
#ifdef CONFIG_PM
-diff -urN linux-2.6.22.1.old/drivers/char/Kconfig linux-2.6.22.1/drivers/char/Kconfig
---- linux-2.6.22.1.old/drivers/char/Kconfig 2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/drivers/char/Kconfig 2007-07-29 07:05:30.000000000 +0200
-@@ -1099,5 +1099,12 @@
+Index: linux-2.6.22.19/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/char/Kconfig
++++ linux-2.6.22.19/drivers/char/Kconfig
+@@ -1099,5 +1099,12 @@ config AT91_SPIDEV
The SPI driver gives user mode access to this serial
bus on the AT91RM9200 processor.
+
endmenu
-diff -urN linux-2.6.22.1.old/drivers/char/Makefile linux-2.6.22.1/drivers/char/Makefile
---- linux-2.6.22.1.old/drivers/char/Makefile 2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/drivers/char/Makefile 2007-07-29 07:06:06.000000000 +0200
-@@ -95,6 +95,7 @@
+Index: linux-2.6.22.19/drivers/char/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/char/Makefile
++++ linux-2.6.22.19/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_AT91_SPI) += at91_spi.o
obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
-diff -urN linux-2.6.22.1.old/drivers/char/vlink_giu.c linux-2.6.22.1/drivers/char/vlink_giu.c
---- linux-2.6.22.1.old/drivers/char/vlink_giu.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/char/vlink_giu.c 2007-07-29 07:06:33.000000000 +0200
+Index: linux-2.6.22.19/drivers/char/vlink_giu.c
+===================================================================
+--- /dev/null
++++ linux-2.6.22.19/drivers/char/vlink_giu.c
@@ -0,0 +1,256 @@
+/*
+ * Driver for FDL Versalink GPIO
-diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:50:05.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:56:11.000000000 +0200
-@@ -173,7 +173,7 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+@@ -173,7 +173,7 @@ static struct mtd_partition static_parti
};
#endif
#endif
-diff -urN linux-2.6.22.1.old/drivers/mtd/Kconfig linux-2.6.22.1/drivers/mtd/Kconfig
---- linux-2.6.22.1.old/drivers/mtd/Kconfig 2007-07-29 07:54:27.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/Kconfig 2007-07-29 07:55:21.000000000 +0200
-@@ -160,6 +160,12 @@
+Index: linux-2.6.22.19/drivers/mtd/Kconfig
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/Kconfig
++++ linux-2.6.22.19/drivers/mtd/Kconfig
+@@ -160,6 +160,12 @@ config MTD_AFS_PARTS
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
comment "User Modules And Translation Layers"
config MTD_CHAR
-diff -urN linux-2.6.22.1.old/drivers/mtd/Makefile linux-2.6.22.1/drivers/mtd/Makefile
---- linux-2.6.22.1.old/drivers/mtd/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/Makefile 2007-07-29 07:55:39.000000000 +0200
-@@ -11,6 +11,7 @@
+Index: linux-2.6.22.19/drivers/mtd/Makefile
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/Makefile
++++ linux-2.6.22.19/drivers/mtd/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
---- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200
-@@ -174,7 +174,35 @@
+Index: linux-2.6.22.19/drivers/serial/atmel_serial.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/serial/atmel_serial.c
++++ linux-2.6.22.19/drivers/serial/atmel_serial.c
+@@ -174,7 +174,35 @@ static void atmel_set_mctrl(struct uart_
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
at91_set_gpio_value(AT91_PIN_PA21, 1);
}
#endif
-@@ -211,8 +239,10 @@
+@@ -211,8 +239,10 @@ static u_int atmel_get_mctrl(struct uart
/*
* The control signals are active low.
*/
if (!(status & ATMEL_US_CTS))
ret |= TIOCM_CTS;
if (!(status & ATMEL_US_DSR))
-@@ -220,6 +250,16 @@
+@@ -220,6 +250,16 @@ static u_int atmel_get_mctrl(struct uart
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
return ret;
}
-@@ -511,6 +551,34 @@
+@@ -511,6 +551,34 @@ static void atmel_tx_chars(struct uart_p
}
/*
* Interrupt handler
*/
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -587,6 +655,23 @@
+@@ -587,6 +655,23 @@ static int atmel_startup(struct uart_por
return retval;
}
/*
* Initialize DMA (if necessary)
*/
-@@ -603,6 +688,10 @@
+@@ -603,6 +688,10 @@ static int atmel_startup(struct uart_por
kfree(atmel_port->pdc_rx[0].buf);
}
free_irq(port->irq, port);
return -ENOMEM;
}
pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -636,6 +725,10 @@
+@@ -636,6 +725,10 @@ static int atmel_startup(struct uart_por
retval = atmel_open_hook(port);
if (retval) {
free_irq(port->irq, port);
return retval;
}
}
-@@ -701,6 +794,10 @@
+@@ -701,6 +794,10 @@ static void atmel_shutdown(struct uart_p
* Free the interrupt
*/
free_irq(port->irq, port);
-diff -urN linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.22.1.old/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 06:46:13.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-29 07:23:35.000000000 +0200
-@@ -721,6 +721,10 @@
+Index: linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c
+===================================================================
+--- linux-2.6.22.19.orig/arch/arm/mach-at91/at91rm9200_devices.c
++++ linux-2.6.22.19/arch/arm/mach-at91/at91rm9200_devices.c
+@@ -721,6 +721,10 @@ static inline void configure_usart0_pins
* We need to drive the pin manually. Default is off (RTS is active low).
*/
at91_set_gpio_output(AT91_PIN_PA21, 1);
}
static struct resource uart1_resources[] = {
-@@ -832,6 +836,12 @@
+@@ -832,6 +836,12 @@ static inline void configure_usart3_pins
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
---- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old 2007-06-04 18:15:49.000000000 +0200
-+++ linux-2.6.21.1/drivers/net/arm/at91_ether.c 2007-06-04 18:10:36.000000000 +0200
-@@ -146,6 +146,7 @@
+Index: linux-2.6.22.19/drivers/net/arm/at91_ether.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/net/arm/at91_ether.c
++++ linux-2.6.22.19/drivers/net/arm/at91_ether.c
+@@ -146,6 +146,7 @@ static void update_linkspeed(struct net_
struct at91_private *lp = netdev_priv(dev);
unsigned int bmsr, bmcr, lpa, mac_cfg;
unsigned int speed, duplex;
if (!mii_link_ok(&lp->mii)) { /* no link */
netif_carrier_off(dev);
-@@ -158,8 +159,15 @@
+@@ -158,8 +159,15 @@ static void update_linkspeed(struct net_
read_phy(lp->phy_address, MII_BMSR, &bmsr);
read_phy(lp->phy_address, MII_BMCR, &bmcr);
if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
-diff -urN linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.22.1.old/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:18:10.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c 2007-07-29 07:32:52.000000000 +0200
-@@ -161,12 +161,12 @@
+Index: linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+===================================================================
+--- linux-2.6.22.19.orig/drivers/mtd/devices/at91_dataflash.c
++++ linux-2.6.22.19/drivers/mtd/devices/at91_dataflash.c
+@@ -161,12 +161,12 @@ static struct mtd_partition static_parti
.mask_flags = MTD_WRITEABLE, /* read-only */
},
{
projects / openwrt.git / commitdiff