[cns3xxx]: enable smp support
[openwrt.git] / target / linux /
2011-07-07 kaloz[cns3xxx]: enable smp support
2011-07-07 kaloz[cns3xxx]: make smp code more similar to upstream
2011-07-07 kaloz[generic/3.0]: 3.0 is at rc6 now
2011-07-07 juhosgar71xx: build image for the AP121 boards with 4M of...
2011-07-07 juhosgar71xx: add separate profiles for the AP121 and AP121...
2011-07-07 kaloz[generic/3.0]: add support for and switch to XZ compres...
2011-07-07 kaloz[cns3xxx]: select the right cpu
2011-07-07 florian[kernel] fix building of perf for arm on uclibc
2011-07-07 florian[realview] enable support for perf events
2011-07-07 florian[malta] enable perf counter support
2011-07-07 cshore[ar7] base-files: diag.sh: added failsafe led definition
2011-07-06 blogic[lantiq] get ready for 3.0
2011-07-06 juhosgramips: fix buffalo image generation
2011-07-06 kaloz[ixp4xx]: add 3.0 support
2011-07-06 kalozrefresh patches
2011-07-06 kaloz[generic]: fixup mtd refresh and co.
2011-07-06 kaloz[generic/3.0]: fix myloader patch, thanks KanjiMonster
2011-07-06 blogicfixes mtd maps for lantiq easy50712 and easy50601 evalk...
2011-07-06 kaloz[cns3xxx]: we have an up-to-date mach-type file now
2011-07-06 kaloz[generic/3.0]: replace the cut down machtype with the...
2011-07-06 florian[brcm63xx] move board_HW553 inside the ifdef ..BCM6358...
2011-07-06 florian[kernel] refresh 2.6.39 geode patches
2011-07-06 juhosgramips: add diag support for RT-N15 and PWH2004
2011-07-06 juhosgramips: use the 'router' LED for diagnostic on the...
2011-07-06 juhosgramips: create tftp image for the WHR-G300N board
2011-07-06 juhosgramips: create factory image for the WHR-G300N board
2011-07-06 cshore[brcm63xx] Makefile: fixed inclusion of kmod-leds-gpio...
2011-07-06 cshore[brcm63xx] profiles: GW6X00: fixed inclusion of both...
2011-07-05 kaloz[generic/3.0]: add some symbols
2011-07-05 florian[kernel] sched_connmark depends on NF_CONNTRACK_MARK...
2011-07-05 kaloz[target/generic/3.0]: add missing symbols
2011-07-04 florian[brcm63xx] hw553: fix missing has_uart0 in board defini...
2011-07-04 juhosgar71xx: fix building of squashfs images
2011-07-04 blogicset DEFAULT_SUBTARGET for lantiq/
2011-07-04 blogicfix broken falcon patches from last night
2011-07-04 juhosgramips: create factory image for DIR-300-B1
2011-07-04 nbdar71xx: add wzr-hp-ag300h sysupgrade support (patch...
2011-07-03 blogicAT91: flexibity: add system uci file
2011-07-03 blogicAT91: Add flexibity board support
2011-07-03 blogicalix2: add/subtract features as needed
2011-07-03 blogicuse netif_receive_skb on lantiq
2011-07-03 blogicautomatic subtarget enumaration
2011-07-03 blogicupdate lantiq/falcon patches
2011-07-03 blogicfix description for lantiq target
2011-07-03 juhosgramips: merge 2.6.39 patches
2011-07-03 juhosgramips: remove 2.6.37 stuff
2011-07-03 juhosgramips: switch to 2.6.39.2
2011-07-03 juhosgramips: add 2.6.39 support
2011-07-03 juhosgramips: add hotplug script to extract eeprom for the...
2011-07-03 juhosgramips: specify eeprom file name on RT305X
2011-07-03 juhosgramips: specify eeprom file name on RT288X
2011-07-03 juhosggeneric: add rt2x00_platform.h
2011-07-03 juhosgramips: add all supported boards to lib/ramips.sh
2011-07-03 juhosgramips: check the size of the uImage in image generation
2011-07-03 juhosgramips: use lowercase partiion names on the WCR150GN...
2011-07-03 juhosgramips: use different partition names in the DIR-300...
2011-07-03 juhosgramips: force word write on flashes with AMD cmdset...
2011-07-03 juhosgramips: update partition map for DIR-300-B1
2011-07-03 juhosgramips: consistently use 'firmware' name for sysupgrade...
2011-07-03 juhosgramips: fix a section mismatch warning
2011-07-03 juhosgramips: remove unused include from the common GPIO...
2011-07-03 juhosgramips: disable watchdog on sysupgrade
2011-07-03 juhosgramips: swap target check in image generation
2011-07-03 juhosgramips: update HW550-3G mtd partitions
2011-07-03 juhosgramips: set cp0_perfcount_irq for RT305X
2011-07-03 cshore[x86] target/patches: This has been sent upstream,...
2011-07-03 cshore[x86] target/patches: Like the earlier mfgpt patch...
2011-07-03 cshore[x86] Revert "Like the earlier mfgpt patch, the new...
2011-07-03 cshoreLike the earlier mfgpt patch, the new GPIO drivers...
2011-07-03 cshoreThe Geode CS5535 and CS5536 companion chips are backwar...
2011-07-02 juhosgar71xx: use 4k image only for the AP121 board
2011-07-02 kaloz[cns21xx]: cns21xx belongs to the Econa family, too
2011-07-02 kaloz[etrax]: mark it broken
2011-07-01 jow[ar71xx] revert r27043 (#9513)
2011-07-01 jow[ar71xx] revert r27341, it introduce wrong behaviour...
2011-07-01 jow[ar71xx] turn status LED off if device finished initial...
2011-07-01 kaloz[avr32]: upgrade avr32 u-boot to 2011.06
2011-07-01 kaloz[avr32]: upgrade to 2.6.39.2
2011-07-01 kaloz[cns3xxx]: preliminary 3.0 support
2011-07-01 kaloz[target/generic/3.0]: add missing kernel symbols
2011-07-01 nbdfix the gpio_dev driver: remove existing forward port...
2011-06-30 juhosgar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR...
2011-06-29 haukebrcm47xx: deactivate wndr3400 for now as this device...
2011-06-29 juhosgar71xx: merge 2.6.39 patches
2011-06-29 juhosgar71xx: remove 2.6.37 support as well
2011-06-29 juhosgar71xx: remove 2.6.38 support
2011-06-29 juhosgar71xx: switch to 2.6.39
2011-06-29 juhosgar71xx: add 2.6.39 support
2011-06-29 juhosgar71xx: remove ar71xx_gpio_irq_set_type
2011-06-29 juhosgar71xx: add separate handlers for IP3 interrupts
2011-06-29 juhosgar71xx: use separate handlers for IP2 interrupts
2011-06-29 juhosgar71xx: remove useless irq_desc.status initializations
2011-06-29 juhosggeneric: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0
2011-06-28 haukebrcm47xx: generate image to flash on Netgear WNDR3400.
2011-06-28 haukebrcm47xx: add initial support for devices with bcma...
2011-06-28 haukekernel: refresh patches for kernel 3.0-rc5
2011-06-28 haukekernel: update ssb and bcma to linux-next next-20110628
2011-06-28 haukekernel: update kernel to 2.6.39.2
2011-06-28 kaloz[cns3xxx]: ethernet cleanup and sata fix - thanks,...
2011-06-27 haukebrcm47xx: update kernel to version 2.6.39
next
This page took 0.051307 seconds and 7 git commands to generate.