[brcm63xx] do not write to per-port over-current register, which is bogus (#6898)
[openwrt.git] / target / linux / brcm47xx /
2009-02-21 hauke[kernel] update to 2.6.28.7 and 2.6.27.19
2009-02-18 markusnew upstream kernel 2.6.28.6
2009-02-14 mbFix bcm47xx GPIO dirin/dirout API return codes.
2009-02-13 markuschanged default kernel to 2.6.28.5, it at least runs on
2009-02-03 mbbcm47xx: Implement the remaining parts of PMU init.
2009-02-02 mbbcm47xx: Rename all SSB_PLLRES_ to SSB_PMURES_
2009-02-02 mbbcm47xx: Implement 4312 and part of 4325 PLL init.
2009-02-01 mbbcm47xx: Implement the remaining PMU resource inits.
2009-02-01 mbbcm47xx: Add support for the 5354 PMU.
2009-01-09 nbdb44: fix misalignment and space-saving in rx packet...
2009-01-06 nbdnuke old 2.6.23 code for brcm47xx
2009-01-06 nbdadd initial 2.6.28 support for brcm47xx target
2009-01-02 agbAdd hostapd-mini to default images where applicable
2008-12-12 florianFix the default negotiation to be 10Mbits HD on some...
2008-11-25 kalozmove THERMAL symbols into the generic config
2008-11-12 juhosg[kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and...
2008-11-09 florianBuild b43, b43legacy and ath9k for kernels >= 2.6.27...
2008-11-07 juhosg[kernel] update to 2.6.25.19, and refresh patches
2008-11-02 nbdturn the wrtsl54gs workaround into a more generic fix...
2008-10-20 juhosg[brcm47xx] fix boot failure on some boards
2008-10-18 nbdchange the way ./files* and the generic kernel files...
2008-10-02 nozAdd workaround for eth0/1 PHY on WRTSL54GS
2008-09-27 agb[ath5k] create a profile for brcm47xx and ixp4xx
2008-09-27 agb[brcm47xx] make b43 the default profile
2008-09-26 juhosg[kernel] update to 2.6.26.5 and 2.6.25.17
2008-09-24 nicodisable CONFIG_USB_SUPPORT in generic config for 2...
2008-08-22 juhosg[kernel] update to 2.6.26.3 and 2.6.25.16
2008-08-14 juhosg[brcm47xx] refresh 2.6.23 patches
2008-08-13 florianNow we have b43 working in master mode, include b43...
2008-08-07 juhosg[kernel] update to 2.6.25.15 and 2.6.26.2
2008-07-26 juhosg[kernel] update to 2.6.25.12
2008-07-22 juhosg[brcm47xx] fix compile error (closes #3799)
2008-07-20 mbUpdate gpiommc to use configfs
2008-07-16 florianDisable ubsec ssb by default on WGT634U until it gets...
2008-07-15 florianInclude ubsec ssb in the WGT634U profile
2008-07-08 noz[brcm47xx] On embedded devices we must not route the...
2008-07-05 kalozupdate targets to 2.6.25.10
2008-06-26 kalozupgrade to 2.6.25.9
2008-06-17 juhosg[kernel] upgrade to 2.6.25.7, and refresh patches
2008-06-16 noz[brcm47xx] Fix TG3 build. Thanks Hauke Mehrtens
2008-06-11 kalozupgrade to 2.6.25.6
2008-06-03 noz[brcm47xx] Update 2.6.25 config
2008-06-03 noz[brcm47xx] Build against 2.6.25.4
2008-05-27 noz[brcm47xx] Remove obsolete CFE workaround, now proper...
2008-05-22 florianAdd a WL500GPv1 profile (#3395)
2008-05-20 nozRevert last 3 commits made in error. Proper versions...
2008-05-20 nozBuild brcm47xx against 2.6.25.1
2008-05-20 nozUpdate generic-2.6 and brcm47xx 2.6.25 configs
2008-05-19 juhosg[brcm47xx] refresh kernel patches
2008-05-18 noz[brcm47xx] Fix kmap_coherent use on 2.6.25 kernels
2008-05-18 juhosg[kernel] upgrade to latest kernel versions (2.6.25...
2008-05-16 noz[generic-2.6] Remove files now present upstream in...
2008-05-09 nicoenable proper PCI & USB support detection at config...
2008-05-02 juhosg[brcm47xx] fix GENERIC_GPIO support
2008-05-01 agb[brcm47xx] Disable CONFIG_CONNECTOR in config-2.6.23
2008-04-27 nicoproperly disable CONFIG_CRYPTO_HW
2008-04-25 nozFirst step to upgrade of brcm47xx to kernel version...
2008-03-23 agbFix b44 phyaddr by applying the PHY-address mask. Close...
2008-03-21 mblinux-2.6: Add a driver to run an MMC or SD card over...
2008-03-19 mbbcm47xx: Fix warning
2008-03-19 mbbcm47xx: Register a GPIODEV platform device to allow...
2008-03-15 mbbcm47xx: Fix GPIO data direction output bit assignment
2008-03-13 mbUpdate cleanups of ssb-gige
2008-02-28 mbSSB-GigE: Fix IRQ routing. This makes the device work...
2008-02-27 mbFix the roboswitch code for the WRT350N
2008-02-23 mbMore SSB GigE fixes.
2008-02-20 mbbcm47xx: Add driver for the SSB Gigabit Ethernet core.
2008-02-19 mbssb: Fix the horrible crash of innocent cardbus cards.
2008-02-19 mbssb: Make the GPIO API reentrancy safe.
2008-02-19 mbssb: Update the GPIO API
2008-02-19 mbSSB: Update the watchdog fix to the patch version that...
2008-02-19 mbssb: Move the generic ssb fixes patch to the generic...
2008-02-19 mbssb: Workaround: Need subsys_initcall to be able to...
2008-02-19 mbssb: Update to latest upstream version of ssb.
2008-02-19 agbPatch for extif watchdog support. Thanks b.sander....
2008-02-18 mbssb: Fix serial console on new 47xx devices.
2008-02-17 mbbcm47xx: We can use the ssb-invariants callback now,
2008-02-17 mbbcm47xx: Remove FIXME
2008-02-16 mbbcm47xx: Extract all available information from NVRAM...
2008-02-16 mbFix support for PCI devices behind a SSB->PCI bridge.
2008-02-11 kalozupgrade & standardize kernel versions
2008-01-27 nbdadd brcm47xx patch by crazy_imp to fix a patch chunk...
2007-12-10 florianEnable SSB ohci driver (#2828)
2007-12-09 florianAdd bcm5354 patches from #2757
2007-11-16 nbdfix wl-700gE ide init (patch by biblbroks, fixes #2686)
2007-11-16 nbdadd lzma compressed initramfs for bcm947xx
2007-11-13 florianAdd bcm5354 fixes from #2611
2007-11-11 nbdadd b43 fixes from #2677
2007-10-23 florianWe are now at .23.1
2007-10-14 nbdfix i2c-gpio
2007-10-14 nbdsync ssb with upstream
2007-10-13 nbdFinally fix the annoying BCM4704 segfault issues (...
2007-10-13 nbdadd patches for 2.6.23 on brcm47xx (not enabled yet)
2007-09-23 nicomove crypto support to a seperate crypto.mk file, split...
2007-09-22 nicoadd missing 2.6 conntrack/nat helpers, add 2.6 conntrac...
2007-09-19 nbdclean up jffs2 config options
2007-09-08 nbdadapt profiles for subtarget changes
2007-09-08 nbdmajor target cleanup. it is now possible to have subtar...
2007-09-06 nbdremove some obsolete files
2007-09-06 nbdstrip the kernel version suffix from target directories...
This page took 0.322463 seconds and 7 git commands to generate.