cardbus != pcmcia -- disable it in b43
[openwrt.git] / target / linux / adm5120 /
2009-05-14 kalozmake kernels use /etc/preinit by default
2009-05-04 kalozsome more kernel config cleanup.. last for today :)
2009-05-04 kalozmore cleanup
2009-05-04 kalozcleanup MTD option handling
2009-05-03 kalozupgrade to newest stable kernel versions
2009-04-26 juhosg[adm5120] switch to 2.6.28
2009-04-26 juhosg[adm5120] resync 2.6.28 config
2009-04-26 juhosg[adm5120] refresh 2.6.28 patches
2009-04-26 juhosg[adm5120] build firmware image for the NFS-101U/101WU...
2009-04-17 nbdget rid of $Id$ - it has never helped us and it has...
2009-03-24 hauke[kernel] update to kernel version 2.6.27.21
2009-03-14 nbdnuke obsolete kernel stuff
2009-02-21 hauke[kernel] update to 2.6.28.7 and 2.6.27.19
2009-02-15 juhosg[kernel] update to 2.6.27.17
2009-02-14 juhosg[adm5120] fix a typo in the image generation makefile...
2009-02-08 juhosg[adm5120] enable CAS-630/630W support
2009-02-08 juhosg[kernel] update to 2.6.27.15
2009-02-02 juhosg[adm5120] nfs-101u: add PCI IRQ map for the NEC USB...
2009-01-26 juhosg[adm5120] build firmware image for the CR-NSADP board
2009-01-26 juhosg[adm5120] add USB drivers for the NFS-101U/WU profiles
2009-01-26 juhosg[adm5120] refresh 2.6.28 patches
2009-01-25 juhosg[adm5120] oops, revert to 2.6.27.13
2009-01-25 juhosg[adm5120] preliminary support for 2.6.28 (based on...
2009-01-25 juhosg[kernel] update to 2.6.27.13
2009-01-23 juhosg[kernel] switch to 2.6.27.12
2009-01-16 florian[adm5120] use 2.6.27.11 kernel
2009-01-13 juhosg[adm5120] NFS-101U/WU: add PCI irq map and change vlan map
2009-01-02 agbAdd hostapd-mini to default images where applicable
2008-12-06 juhosg[adm5120] use mips_machine code
2008-12-02 juhosg[kernel] make mips_machine stuff available for other...
2008-11-28 juhosg[adm5120] sync kernel configs
2008-11-17 juhosg[adm5120] move MyLoader partition parser into generic...
2008-11-17 juhosg[adm5120] update MyLoader partition parser, add support...
2008-11-12 juhosg[kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and...
2008-11-06 juhosg[kernel] refresh 2.6.26 patches
2008-10-23 florianUpdate to 2.6.26.7
2008-10-15 juhosg[kernel] refresh patches against 2.6.27 final
2008-10-07 juhosg[kernel] refresh 2.6.27 patches based on -rc9
2008-10-07 juhosg[adm5120] fix compile errors in USB driver under 2...
2008-10-05 juhosg[adm5120] experimental support for 2.6.27
2008-09-26 juhosg[kernel] update to 2.6.26.5 and 2.6.25.17
2008-09-25 juhosg[adm5120] sync kernel config
2008-09-25 juhosg[adm5120] remove broken status from the Big Endian...
2008-09-25 nbdsysupgrade for adm5120
2008-09-25 nicomove CONFIG_MEDIA_ATTACH & CONFIG_VIDEO_ALLOW_V4L1...
2008-09-24 nicodisable CONFIG_USB_SUPPORT in generic config for 2...
2008-09-23 juhosg[adm5120] experimental support for the Motorola MU...
2008-09-23 juhosg[adm5120] add board specific UART registration
2008-09-23 juhosg[adm5120] remove 2.6.25 config files
2008-09-13 juhosg[adm5120] remove 2.6.25 specific stuff
2008-09-12 juhosg[adm5120] convert to GPIOLIB
2008-08-27 juhosg[adm5120] generate images for the EASY 5120P-ATA board
2008-08-25 juhosg[adm5120] minor cleanups
2008-08-22 juhosg[adm5120] sync kernel config
2008-08-22 juhosg[kernel] update to 2.6.26.3 and 2.6.25.16
2008-08-21 nicoset reasonable generic CRYPTO_ config entries for 2...
2008-08-20 juhosg[adm5120] load the mac address from flash where it...
2008-08-13 juhosg[adm5120] load board's mac address on Compex devices
2008-08-13 juhosg[adm5120] fix gpio number of the reset button Compex...
2008-08-12 florianAllow routerboard users to kexec into the newly install...
2008-08-09 juhosg[adm5120] split support of Cellvision boards
2008-08-07 juhosg[kernel] update to 2.6.25.15 and 2.6.26.2
2008-08-07 juhosg[adm5120] add 2.6.26 specific files
2008-08-07 juhosg[adm5120] add alternative board id for the ZyXEL P...
2008-08-05 juhosg[adm5120] sync kernel config
2008-08-05 juhosg[adm5120] experimental gpiodev support (closes #3613)
2008-08-04 juhosg[adm5120] fix RB-133/133C led definitions
2008-08-04 juhosg[adm5120] add missing buttons device for RB-1xx boards...
2008-07-30 nicomove CONFIG_XFS_DEBUG to generic config
2008-07-28 juhosg[adm5120] make use DMA_BIT_MASK
2008-07-27 juhosg[adm5120] fix a bug in the USB driver debug code
2008-07-27 juhosg[adm5120] sync 2.6.26 config
2008-07-26 juhosg[adm5120] initial 2.6.26 support
2008-07-26 juhosg[adm5120] make boot quiet a bit
2008-07-26 juhosg[kernel] update to 2.6.25.12
2008-07-05 kalozupdate targets to 2.6.25.10
2008-06-26 kalozupgrade to 2.6.25.9
2008-06-22 juhosg[adm5120] generate firmware images for the ZyXEL P...
2008-06-22 juhosg[adm5120] use __raw_{readl,writel} routines in the...
2008-06-22 juhosg[adm5120] use __raw_{readl,writel} routines in the...
2008-06-22 juhosg[adm5120] swap I/O space if running in big-endian mode
2008-06-17 juhosg[adm5120] IRQ code cleanup
2008-06-17 juhosg[adm5120] switch to 2.6.25.7
2008-06-17 juhosg[adm5120] fix compiler warning
2008-06-08 juhosg[adm5120] add packages required by failsafe support...
2008-06-08 juhosg[adm5120] add initial failsafe support
2008-06-08 juhosg[adm5120] add button devices to several boards
2008-06-07 juhosg[adm5120] fix image names in the whet2nand script
2008-06-06 juhosg[adm5120] make use the chip_fixup function of the plat_...
2008-06-06 juhosg[adm5120] refresh patches to match upstream style
2008-05-28 juhosg[adm5120] enable yaffs fs on 2.6.25
2008-05-28 juhosg[adm5120] resync kernel configs
2008-05-19 juhosg[adm5120] refresh kernel patches
2008-05-18 juhosg[kernel] upgrade to latest kernel versions (2.6.25...
2008-05-09 nicoenable proper PCI & USB support detection at config...
2008-05-07 juhosg[adm5120] Add leds support for the RB-150, thanks to...
2008-05-02 juhosg[adm5120] fix some build errors on .25
2008-05-02 juhosg[adm5120] add initial support for 2.6.25
2008-05-01 juhosg[adm5120] improve support of the Infineon EASY 5120...
2008-04-29 juhosg[package] remove the i2c-gpio-custom driver from adm512...
next
This page took 0.123647 seconds and 7 git commands to generate.