RepRap%2FConfigs%2FSlic3r%2Fprint-abs-0.3mm.ini.mw

   1 # generated by Slic3r 1.2.9 on Fri Jan 29 00:56:08 2016
   2 avoid_crossing_perimeters = 1
   3 bottom_solid_layers = 3
   4 bridge_acceleration = 0
   5 bridge_flow_ratio = 1
   6 bridge_speed = 30
   7 brim_width = 0
   8 complete_objects = 0
   9 default_acceleration = 0
  10 dont_support_bridges = 1
  11 external_fill_pattern = rectilinear
  12 external_perimeter_extrusion_width = 0
  13 external_perimeter_speed = 26
  14 external_perimeters_first = 0
  15 extra_perimeters = 1
  16 extruder_clearance_height = 20
  17 extruder_clearance_radius = 20
  18 extrusion_width = 0.5
  19 fill_angle = 45
  20 fill_density = 15%
  21 fill_pattern = honeycomb
  22 first_layer_acceleration = 0
  23 first_layer_extrusion_width = 0.5
  24 first_layer_height = 0.3
  25 first_layer_speed = 20
  26 gap_fill_speed = 20
  27 gcode_comments = 0
  28 infill_acceleration = 0
  29 infill_every_layers = 1
  30 infill_extruder = 1
  31 infill_extrusion_width = 0.5
  32 infill_first = 0
  33 infill_only_where_needed = 0
  34 infill_overlap = 15%
  35 infill_speed = 50
  36 interface_shells = 0
  37 layer_height = 0.3
  38 max_print_speed = 80
  39 max_volumetric_speed = 0
  40 min_skirt_length = 10
  41 notes = based on the official RepRapPro "Mendel ABS 05 nozzle.ini" from https://github.com/reprappro/profiles/archive/v1.0.tar.gz
  42 only_retract_when_crossing_perimeters = 1
  43 ooze_prevention = 0
  44 output_filename_format = [input_filename_base]_Mendel_ABS.gcode
  45 overhangs = 1
  46 perimeter_acceleration = 0
  47 perimeter_extruder = 1
  48 perimeter_extrusion_width = 0.5
  49 perimeter_speed = 32
  50 perimeters = 2
  51 post_process =
  52 raft_layers = 0
  53 resolution = 0
  54 seam_position = aligned
  55 skirt_distance = 6
  56 skirt_height = 1
  57 skirts = 1
  58 small_perimeter_speed = 26
  59 solid_infill_below_area = 5
  60 solid_infill_every_layers = 0
  61 solid_infill_extruder = 1
  62 solid_infill_extrusion_width = 0
  63 solid_infill_speed = 40
  64 spiral_vase = 0
  65 standby_temperature_delta = -5
  66 support_material = 0
  67 support_material_angle = 0
  68 support_material_contact_distance = 0.2
  69 support_material_enforce_layers = 0
  70 support_material_extruder = 1
  71 support_material_extrusion_width = 85%
  72 support_material_interface_extruder = 1
  73 support_material_interface_layers = 3
  74 support_material_interface_spacing = 0
  75 support_material_interface_speed = 100%
  76 support_material_pattern = rectilinear
  77 support_material_spacing = 6
  78 support_material_speed = 20
  79 support_material_threshold = 45
  80 thin_walls = 1
  81 threads = 4
  82 top_infill_extrusion_width = 0
  83 top_solid_infill_speed = 32
  84 top_solid_layers = 3
  85 travel_speed = 250
  86 xy_size_compensation = 0