RepRap%2FConfigs%2FSlic3r%2Fchrissi-filament-gelb.ini.mw

   1 acceleration = 0
   2 bed_size = 170,170
   3 bed_temperature = 60
   4 bridge_fan_speed = 100
   5 bridge_flow_ratio = 1
   6 bridge_speed = 30
   7 brim_width = 0
   8 complete_objects = 0
   9 cooling = 1
  10 disable_fan_first_layers = 1
  11 duplicate = 1
  12 duplicate_distance = 6
  13 duplicate_grid = 1,1
  14 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
  15 external_perimeter_speed = 90%
  16 extra_perimeters = 1
  17 extruder_clearance_height = 20
  18 extruder_clearance_radius = 20
  19 extrusion_axis = E
  20 extrusion_multiplier = 1
  21 extrusion_width = 0
  22 fan_always_on = 0
  23 fan_below_layer_time = 60
  24 filament_diameter = 3
  25 fill_angle = 45
  26 fill_density = 0.15
  27 fill_pattern = rectilinear
  28 first_layer_bed_temperature = 60
  29 first_layer_extrusion_width = 0
  30 first_layer_height = 115%
  31 first_layer_speed = 80%
  32 first_layer_temperature = 200
  33 g0 = 0
  34 gcode_arcs = 0
  35 gcode_comments = 0
  36 gcode_flavor = reprap
  37 infill_acceleration = 50
  38 infill_every_layers = 1
  39 infill_extruder = 1
  40 infill_extrusion_width = 0
  41 infill_speed = 40
  42 layer_gcode =
  43 layer_height = 0.28
  44 max_fan_speed = 100
  45 min_fan_speed = 35
  46 min_print_speed = 10
  47 notes = Used for Mate name tag
  48 nozzle_diameter = 0.35
  49 output_filename_format = [input_filename_base].gcode
  50 perimeter_acceleration = 25
  51 perimeter_speed = 30
  52 perimeters = 3
  53 perimeters_extruder = 1
  54 perimeters_extrusion_width = 0
  55 post_process =
  56 print_center = 50,27
  57 randomize_start = 1
  58 retract_before_travel = 4
  59 retract_length = 3
  60 retract_lift = 0.4
  61 retract_restart_extra = 0
  62 retract_speed = 30
  63 rotate = 0
  64 scale = 1
  65 skirt_distance = 6
  66 skirt_height = 1
  67 skirts = 3
  68 slowdown_below_layer_time = 60
  69 small_perimeter_speed = 30
  70 solid_fill_pattern = rectilinear
  71 solid_infill_speed = 40
  72 solid_layers = 3
  73 start_gcode = G28 ; home all axes\nM92 E820
  74 support_material =
  75 support_material_angle = 45
  76 support_material_extruder = 1
  77 support_material_extrusion_width = 0
  78 support_material_pattern = rectilinear
  79 support_material_spacing = 2.5
  80 support_material_threshold = 45
  81 temperature = 195
  82 threads = 2
  83 top_solid_infill_speed = 40
  84 travel_speed = 130
  85 use_relative_e_distances = 0
  86 z_offset = 0.22