RepRap%2FConfigs%2FSlic3r%2Fchrissi-allround.ini.mw

   1 # generated by Slic3r 0.9.3 on Tue Nov  6 21:53:43 2012
   2 acceleration = 0
   3 bed_size = 180,200
   4 bed_temperature = 60
   5 bridge_fan_speed = 100
   6 bridge_flow_ratio = 1.05
   7 bridge_speed = 60
   8 brim_width = 0
   9 complete_objects =
  10 cooling = 1
  11 disable_fan_first_layers = 1
  12 duplicate = 1
  13 duplicate_distance = 6
  14 duplicate_grid = 1,1
  15 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
  16 external_perimeter_speed = 100%
  17 extra_perimeters = 1
  18 extruder_clearance_height = 20
  19 extruder_clearance_radius = 30
  20 extruder_offset = 0x0
  21 extrusion_axis = E
  22 extrusion_multiplier = 1
  23 extrusion_width = 100%
  24 fan_always_on = 0
  25 fan_below_layer_time = 60
  26 filament_diameter = 1.75
  27 fill_angle = 45
  28 fill_density = 0.1
  29 fill_pattern = rectilinear
  30 first_layer_bed_temperature = 60
  31 first_layer_extrusion_width = 112%
  32 first_layer_height = 95%
  33 first_layer_speed = 15%
  34 first_layer_temperature = 200
  35 g0 = 0
  36 gcode_arcs = 0
  37 gcode_comments = 0
  38 gcode_flavor = reprap
  39 infill_acceleration = 50
  40 infill_every_layers = 1
  41 infill_extruder = 1
  42 infill_extrusion_width = 120%
  43 infill_speed = 60
  44 layer_gcode =
  45 layer_height = 0.3
  46 max_fan_speed = 100
  47 min_fan_speed = 35
  48 min_print_speed = 5
  49 notes = larsanconfig
  50 nozzle_diameter = 0.35
  51 only_retract_when_crossing_perimeters = 1
  52 output_filename_format = [timestamp]_[input_filename_base].gcode
  53 perimeter_acceleration = 25
  54 perimeter_extruder = 1
  55 perimeter_extrusion_width = 0
  56 perimeter_speed = 60
  57 perimeters = 2
  58 post_process =
  59 print_center = 120,120
  60 randomize_start = 1
  61 retract_before_travel = 4
  62 retract_length = 2
  63 retract_length_toolchange = 3
  64 retract_lift = 0
  65 retract_restart_extra = 0
  66 retract_restart_extra_toolchange = 0
  67 retract_speed = 50
  68 rotate = 0
  69 scale = 1
  70 skirt_distance = 10
  71 skirt_height = 1
  72 skirts = 3
  73 slowdown_below_layer_time = 50
  74 small_perimeter_speed = 50%
  75 solid_fill_pattern = rectilinear
  76 solid_infill_below_area = 0
  77 solid_infill_every_layers = 0
  78 solid_infill_speed = 100%
  79 solid_layers = 3
  80 start_gcode = G28 ; home all axes\nM92 E820
  81 support_material = 1
  82 support_material_angle = 45
  83 support_material_extruder = 1
  84 support_material_extrusion_width = 160%
  85 support_material_pattern = rectilinear
  86 support_material_spacing = 2
  87 support_material_threshold = 40
  88 temperature = 205
  89 threads = 2
  90 top_solid_infill_speed = 40%
  91 travel_speed = 90
  92 use_relative_e_distances = 0
  93 z_offset = 0