3D-Drucker%2FSlicerBundle.ini.mw

   1 # generated by Slic3r 1.2.9 on Sun Aug 14 14:31:08 2016
   2
   3 [filament:LulzBot ABS]
   4 bed_temperature = 100
   5 bridge_fan_speed = 50
   6 cooling = 1
   7 disable_fan_first_layers = 1
   8 extrusion_multiplier = 1
   9 fan_always_on = 0
  10 fan_below_layer_time = 60
  11 filament_colour = #FFFFFF
  12 filament_diameter = 2.85
  13 first_layer_bed_temperature = 100
  14 first_layer_temperature = 250
  15 max_fan_speed = 0
  16 min_fan_speed = 0
  17 min_print_speed = 5
  18 slowdown_below_layer_time = 20
  19 temperature = 230
  20
  21 [filament:LulzBot PLA]
  22 bed_temperature = 50
  23 bridge_fan_speed = 100
  24 cooling = 1
  25 disable_fan_first_layers = 1
  26 extrusion_multiplier = 1
  27 fan_always_on = 1
  28 fan_below_layer_time = 60
  29 filament_colour = #FFFFFF
  30 filament_diameter = 2.82
  31 first_layer_bed_temperature = 50
  32 first_layer_temperature = 200
  33 max_fan_speed = 100
  34 min_fan_speed = 35
  35 min_print_speed = 5
  36 slowdown_below_layer_time = 30
  37 temperature = 200
  38
  39 [filament:LulzBot PLA DAS FILAMENT]
  40 bed_temperature = 50
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 1
  44 extrusion_multiplier = 1
  45 fan_always_on = 0
  46 fan_below_layer_time = 60
  47 filament_colour = #FFFFFF
  48 filament_diameter = 2.85
  49 first_layer_bed_temperature = 50
  50 first_layer_temperature = 220
  51 max_fan_speed = 100
  52 min_fan_speed = 30
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 30
  55 temperature = 215
  56
  57 [filament:MendelPro ABS]
  58 bed_temperature = 0
  59 bridge_fan_speed = 100
  60 cooling = 0
  61 disable_fan_first_layers = 1
  62 extrusion_multiplier = 1
  63 fan_always_on = 0
  64 fan_below_layer_time = 60
  65 filament_colour = #FFFFFF
  66 filament_diameter = 1.7
  67 first_layer_bed_temperature = 0
  68 first_layer_temperature = 250
  69 max_fan_speed = 100
  70 min_fan_speed = 50
  71 min_print_speed = 5
  72 slowdown_below_layer_time = 30
  73 temperature = 245
  74
  75 [filament:MendelPro Holz]
  76 bed_temperature = 50
  77 bridge_fan_speed = 100
  78 cooling = 1
  79 disable_fan_first_layers = 1
  80 extrusion_multiplier = 1
  81 fan_always_on = 1
  82 fan_below_layer_time = 60
  83 filament_colour = #FFFFFF
  84 filament_diameter = 1.7
  85 first_layer_bed_temperature = 55
  86 first_layer_temperature = 200
  87 max_fan_speed = 100
  88 min_fan_speed = 50
  89 min_print_speed = 5
  90 slowdown_below_layer_time = 30
  91 temperature = 185
  92
  93 [filament:MendelPro Mystery]
  94 bed_temperature = 80
  95 bridge_fan_speed = 50
  96 cooling = 1
  97 disable_fan_first_layers = 1
  98 extrusion_multiplier = 1
  99 fan_always_on = 0
 100 fan_below_layer_time = 60
 101 filament_colour = #FFFFFF
 102 filament_diameter = 1.7
 103 first_layer_bed_temperature = 80
 104 first_layer_temperature = 250
 105 max_fan_speed = 0
 106 min_fan_speed = 0
 107 min_print_speed = 10
 108 slowdown_below_layer_time = 20
 109 temperature = 200
 110
 111 [filament:MendelPro PLA]
 112 bed_temperature = 50
 113 bridge_fan_speed = 100
 114 cooling = 1
 115 disable_fan_first_layers = 1
 116 extrusion_multiplier = 1
 117 fan_always_on = 1
 118 fan_below_layer_time = 60
 119 filament_colour = #FFFFFF
 120 filament_diameter = 1.7
 121 first_layer_bed_temperature = 55
 122 first_layer_temperature = 200
 123 max_fan_speed = 100
 124 min_fan_speed = 40
 125 min_print_speed = 5
 126 slowdown_below_layer_time = 30
 127 temperature = 185
 128
 129 [filament:MendelPro PLA fast]
 130 bed_temperature = 50
 131 bridge_fan_speed = 100
 132 cooling = 1
 133 disable_fan_first_layers = 1
 134 extrusion_multiplier = 1
 135 fan_always_on = 1
 136 fan_below_layer_time = 60
 137 filament_colour = #FFFFFF
 138 filament_diameter = 1.7
 139 first_layer_bed_temperature = 50
 140 first_layer_temperature = 200
 141 max_fan_speed = 100
 142 min_fan_speed = 50
 143 min_print_speed = 5
 144 slowdown_below_layer_time = 30
 145 temperature = 200
 146
 147 [filament:MendelPro PLA transparent]
 148 bed_temperature = 50
 149 bridge_fan_speed = 100
 150 cooling = 1
 151 disable_fan_first_layers = 1
 152 extrusion_multiplier = 1
 153 fan_always_on = 1
 154 fan_below_layer_time = 60
 155 filament_colour = #FFFFFF
 156 filament_diameter = 1.7
 157 first_layer_bed_temperature = 55
 158 first_layer_temperature = 200
 159 max_fan_speed = 100
 160 min_fan_speed = 40
 161 min_print_speed = 5
 162 slowdown_below_layer_time = 30
 163 temperature = 200
 164
 165 [filament:TinyBoy PLA]
 166 bed_temperature = 0
 167 bridge_fan_speed = 100
 168 cooling = 1
 169 disable_fan_first_layers = 2
 170 extrusion_multiplier = 0.9
 171 fan_always_on = 1
 172 fan_below_layer_time = 60
 173 filament_colour = #35E1FF
 174 filament_diameter = 1.63
 175 first_layer_bed_temperature = 0
 176 first_layer_temperature = 200
 177 max_fan_speed = 40
 178 min_fan_speed = 35
 179 min_print_speed = 5
 180 slowdown_below_layer_time = 15
 181 temperature = 190
 182
 183 [filament:Prusa i3 ABS grün]
 184 bed_temperature = 100
 185 bridge_fan_speed = 70
 186 cooling = 1
 187 disable_fan_first_layers = 1
 188 extrusion_multiplier = 1
 189 fan_always_on = 0
 190 fan_below_layer_time = 60
 191 filament_colour = #80FF00
 192 filament_diameter = 2.9
 193 first_layer_bed_temperature = 100
 194 first_layer_temperature = 255
 195 max_fan_speed = 0
 196 min_fan_speed = 0
 197 min_print_speed = 5
 198 slowdown_below_layer_time = 15
 199 temperature = 245
 200
 201 [filament:Prusa i3 ABS grün blau]
 202 bed_temperature = 100
 203 bridge_fan_speed = 70
 204 cooling = 1
 205 disable_fan_first_layers = 1
 206 extrusion_multiplier = 1
 207 fan_always_on = 0
 208 fan_below_layer_time = 60
 209 filament_colour = #0000A0
 210 filament_diameter = 2.9
 211 first_layer_bed_temperature = 100
 212 first_layer_temperature = 240
 213 max_fan_speed = 0
 214 min_fan_speed = 0
 215 min_print_speed = 5
 216 slowdown_below_layer_time = 30
 217 temperature = 235
 218
 219 [filament:Prusa i3 ABS schwarz]
 220 bed_temperature = 100
 221 bridge_fan_speed = 70
 222 cooling = 1
 223 disable_fan_first_layers = 1
 224 extrusion_multiplier = 1
 225 fan_always_on = 0
 226 fan_below_layer_time = 60
 227 filament_colour = #000000
 228 filament_diameter = 2.9
 229 first_layer_bed_temperature = 100
 230 first_layer_temperature = 260
 231 max_fan_speed = 0
 232 min_fan_speed = 0
 233 min_print_speed = 5
 234 slowdown_below_layer_time = 15
 235 temperature = 255
 236
 237 [filament:Prusa i3 PLA]
 238 bed_temperature = 50
 239 bridge_fan_speed = 100
 240 cooling = 1
 241 disable_fan_first_layers = 1
 242 extrusion_multiplier = 1
 243 fan_always_on = 1
 244 fan_below_layer_time = 60
 245 filament_colour = #FFFFFF
 246 filament_diameter = 2.9
 247 first_layer_bed_temperature = 50
 248 first_layer_temperature = 200
 249 max_fan_speed = 100
 250 min_fan_speed = 50
 251 min_print_speed = 5
 252 slowdown_below_layer_time = 30
 253 temperature = 190
 254
 255 [filament:Prusa i3 PLA lila]
 256 bed_temperature = 50
 257 bridge_fan_speed = 100
 258 cooling = 1
 259 disable_fan_first_layers = 1
 260 extrusion_multiplier = 1
 261 fan_always_on = 1
 262 fan_below_layer_time = 60
 263 filament_colour = #8000FF
 264 filament_diameter = 3
 265 first_layer_bed_temperature = 50
 266 first_layer_temperature = 200
 267 max_fan_speed = 100
 268 min_fan_speed = 35
 269 min_print_speed = 5
 270 slowdown_below_layer_time = 15
 271 temperature = 200
 272
 273 [filament:Prusa i3 PLA pink]
 274 bed_temperature = 50
 275 bridge_fan_speed = 100
 276 cooling = 1
 277 disable_fan_first_layers = 1
 278 extrusion_multiplier = 1
 279 fan_always_on = 1
 280 fan_below_layer_time = 60
 281 filament_colour = #FF00FF
 282 filament_diameter = 2.83
 283 first_layer_bed_temperature = 50
 284 first_layer_temperature = 200
 285 max_fan_speed = 100
 286 min_fan_speed = 35
 287 min_print_speed = 5
 288 slowdown_below_layer_time = 15
 289 temperature = 180
 290
 291 [print:LulzBot fine]
 292 avoid_crossing_perimeters = 1
 293 bottom_solid_layers = 2
 294 bridge_acceleration = 0
 295 bridge_flow_ratio = 1
 296 bridge_speed = 40
 297 brim_width = 5
 298 complete_objects = 0
 299 default_acceleration = 0
 300 dont_support_bridges = 1
 301 external_fill_pattern = rectilinear
 302 external_perimeter_extrusion_width = 0
 303 external_perimeter_speed = 50%
 304 external_perimeters_first = 0
 305 extra_perimeters = 1
 306 extruder_clearance_height = 20
 307 extruder_clearance_radius = 20
 308 extrusion_width = 0
 309 fill_angle = 35
 310 fill_density = 15%
 311 fill_pattern = 3dhoneycomb
 312 first_layer_acceleration = 0
 313 first_layer_extrusion_width = 0
 314 first_layer_height = 0.2
 315 first_layer_speed = 10
 316 gap_fill_speed = 20
 317 gcode_comments = 0
 318 infill_acceleration = 0
 319 infill_every_layers = 1
 320 infill_extruder = 1
 321 infill_extrusion_width = 0
 322 infill_first = 0
 323 infill_only_where_needed = 0
 324 infill_overlap = 15%
 325 infill_speed = 80
 326 interface_shells = 0
 327 layer_height = 0.2
 328 max_print_speed = 80
 329 max_volumetric_speed = 0
 330 min_skirt_length = 2
 331 notes =
 332 only_retract_when_crossing_perimeters = 0
 333 ooze_prevention = 0
 334 output_filename_format = [input_filename_base].gcode
 335 overhangs = 1
 336 perimeter_acceleration = 0
 337 perimeter_extruder = 1
 338 perimeter_extrusion_width = 0
 339 perimeter_speed = 60
 340 perimeters = 3
 341 post_process =
 342 raft_layers = 0
 343 resolution = 0
 344 seam_position = aligned
 345 skirt_distance = 10
 346 skirt_height = 1
 347 skirts = 2
 348 small_perimeter_speed = 20
 349 solid_infill_below_area = 30
 350 solid_infill_every_layers = 0
 351 solid_infill_extruder = 1
 352 solid_infill_extrusion_width = 0
 353 solid_infill_speed = 20
 354 spiral_vase = 0
 355 standby_temperature_delta = -5
 356 support_material = 0
 357 support_material_angle = 0
 358 support_material_contact_distance = 0.2
 359 support_material_enforce_layers = 0
 360 support_material_extruder = 1
 361 support_material_extrusion_width = 0
 362 support_material_interface_extruder = 1
 363 support_material_interface_layers = 0
 364 support_material_interface_spacing = 0
 365 support_material_interface_speed = 100%
 366 support_material_pattern = rectilinear
 367 support_material_spacing = 2.5
 368 support_material_speed = 60
 369 support_material_threshold = 45
 370 thin_walls = 1
 371 threads = 2
 372 top_infill_extrusion_width = 0
 373 top_solid_infill_speed = 20
 374 top_solid_layers = 3
 375 travel_speed = 100
 376 xy_size_compensation = 0
 377
 378 [print:LulzBot fine support]
 379 avoid_crossing_perimeters = 1
 380 bottom_solid_layers = 2
 381 bridge_acceleration = 0
 382 bridge_flow_ratio = 1
 383 bridge_speed = 40
 384 brim_width = 3
 385 complete_objects = 0
 386 default_acceleration = 0
 387 dont_support_bridges = 1
 388 external_fill_pattern = rectilinear
 389 external_perimeter_extrusion_width = 0
 390 external_perimeter_speed = 50%
 391 external_perimeters_first = 0
 392 extra_perimeters = 1
 393 extruder_clearance_height = 20
 394 extruder_clearance_radius = 20
 395 extrusion_width = 0
 396 fill_angle = 35
 397 fill_density = 15%
 398 fill_pattern = 3dhoneycomb
 399 first_layer_acceleration = 0
 400 first_layer_extrusion_width = 0
 401 first_layer_height = 0.2
 402 first_layer_speed = 10
 403 gap_fill_speed = 20
 404 gcode_comments = 0
 405 infill_acceleration = 0
 406 infill_every_layers = 1
 407 infill_extruder = 1
 408 infill_extrusion_width = 0
 409 infill_first = 0
 410 infill_only_where_needed = 0
 411 infill_overlap = 15%
 412 infill_speed = 80
 413 interface_shells = 0
 414 layer_height = 0.2
 415 max_print_speed = 80
 416 max_volumetric_speed = 0
 417 min_skirt_length = 2
 418 notes =
 419 only_retract_when_crossing_perimeters = 0
 420 ooze_prevention = 0
 421 output_filename_format = [input_filename_base].gcode
 422 overhangs = 1
 423 perimeter_acceleration = 0
 424 perimeter_extruder = 1
 425 perimeter_extrusion_width = 0
 426 perimeter_speed = 60
 427 perimeters = 3
 428 post_process =
 429 raft_layers = 0
 430 resolution = 0
 431 seam_position = aligned
 432 skirt_distance = 10
 433 skirt_height = 1
 434 skirts = 2
 435 small_perimeter_speed = 20
 436 solid_infill_below_area = 30
 437 solid_infill_every_layers = 0
 438 solid_infill_extruder = 1
 439 solid_infill_extrusion_width = 0
 440 solid_infill_speed = 20
 441 spiral_vase = 0
 442 standby_temperature_delta = -5
 443 support_material = 1
 444 support_material_angle = 0
 445 support_material_contact_distance = 0.2
 446 support_material_enforce_layers = 0
 447 support_material_extruder = 1
 448 support_material_extrusion_width = 0
 449 support_material_interface_extruder = 1
 450 support_material_interface_layers = 3
 451 support_material_interface_spacing = 0
 452 support_material_interface_speed = 100%
 453 support_material_pattern = honeycomb
 454 support_material_spacing = 2.5
 455 support_material_speed = 60
 456 support_material_threshold = 45
 457 thin_walls = 1
 458 threads = 2
 459 top_infill_extrusion_width = 0
 460 top_solid_infill_speed = 20
 461 top_solid_layers = 3
 462 travel_speed = 100
 463 xy_size_compensation = 0
 464
 465 [print:MendelPro]
 466 avoid_crossing_perimeters = 0
 467 bottom_solid_layers = 3
 468 bridge_acceleration = 0
 469 bridge_flow_ratio = 1
 470 bridge_speed = 40
 471 brim_width = 1
 472 complete_objects = 0
 473 default_acceleration = 0
 474 dont_support_bridges = 1
 475 external_fill_pattern = rectilinear
 476 external_perimeter_extrusion_width = 0
 477 external_perimeter_speed = 20
 478 external_perimeters_first = 0
 479 extra_perimeters = 1
 480 extruder_clearance_height = 20
 481 extruder_clearance_radius = 20
 482 extrusion_width = 0
 483 fill_angle = 45
 484 fill_density = 15%
 485 fill_pattern = 3dhoneycomb
 486 first_layer_acceleration = 0
 487 first_layer_extrusion_width = 0
 488 first_layer_height = 0.2
 489 first_layer_speed = 10
 490 gap_fill_speed = 10
 491 gcode_comments = 0
 492 infill_acceleration = 0
 493 infill_every_layers = 1
 494 infill_extruder = 1
 495 infill_extrusion_width = 0
 496 infill_first = 0
 497 infill_only_where_needed = 0
 498 infill_overlap = 15%
 499 infill_speed = 0
 500 interface_shells = 0
 501 layer_height = 0.2
 502 max_print_speed = 80
 503 max_volumetric_speed = 0
 504 min_skirt_length = 2
 505 notes =
 506 only_retract_when_crossing_perimeters = 1
 507 ooze_prevention = 0
 508 output_filename_format = [input_filename_base].gcode
 509 overhangs = 1
 510 perimeter_acceleration = 0
 511 perimeter_extruder = 1
 512 perimeter_extrusion_width = 0
 513 perimeter_speed = 0
 514 perimeters = 2
 515 post_process =
 516 raft_layers = 0
 517 resolution = 0
 518 seam_position = aligned
 519 skirt_distance = 1
 520 skirt_height = 1
 521 skirts = 2
 522 small_perimeter_speed = 10
 523 solid_infill_below_area = 70
 524 solid_infill_every_layers = 0
 525 solid_infill_extruder = 1
 526 solid_infill_extrusion_width = 0
 527 solid_infill_speed = 0
 528 spiral_vase = 0
 529 standby_temperature_delta = -5
 530 support_material = 0
 531 support_material_angle = 0
 532 support_material_contact_distance = 0.2
 533 support_material_enforce_layers = 0
 534 support_material_extruder = 1
 535 support_material_extrusion_width = 0
 536 support_material_interface_extruder = 1
 537 support_material_interface_layers = 2
 538 support_material_interface_spacing = 0
 539 support_material_interface_speed = 100%
 540 support_material_pattern = rectilinear
 541 support_material_spacing = 5
 542 support_material_speed = 60
 543 support_material_threshold = 40
 544 thin_walls = 1
 545 threads = 2
 546 top_infill_extrusion_width = 0
 547 top_solid_infill_speed = 20
 548 top_solid_layers = 3
 549 travel_speed = 100
 550 xy_size_compensation = 0
 551
 552 [print:MendelPro fast]
 553 avoid_crossing_perimeters = 0
 554 bottom_solid_layers = 3
 555 bridge_acceleration = 0
 556 bridge_flow_ratio = 1
 557 bridge_speed = 40
 558 brim_width = 0
 559 complete_objects = 0
 560 default_acceleration = 0
 561 dont_support_bridges = 1
 562 external_fill_pattern = rectilinear
 563 external_perimeter_extrusion_width = 0
 564 external_perimeter_speed = 20
 565 external_perimeters_first = 0
 566 extra_perimeters = 1
 567 extruder_clearance_height = 20
 568 extruder_clearance_radius = 20
 569 extrusion_width = 0
 570 fill_angle = 45
 571 fill_density = 15%
 572 fill_pattern = 3dhoneycomb
 573 first_layer_acceleration = 0
 574 first_layer_extrusion_width = 0
 575 first_layer_height = 0.2
 576 first_layer_speed = 10
 577 gap_fill_speed = 10
 578 gcode_comments = 0
 579 infill_acceleration = 0
 580 infill_every_layers = 1
 581 infill_extruder = 1
 582 infill_extrusion_width = 0
 583 infill_first = 0
 584 infill_only_where_needed = 0
 585 infill_overlap = 15%
 586 infill_speed = 0
 587 interface_shells = 0
 588 layer_height = 0.5
 589 max_print_speed = 80
 590 max_volumetric_speed = 0
 591 min_skirt_length = 2
 592 notes =
 593 only_retract_when_crossing_perimeters = 1
 594 ooze_prevention = 0
 595 output_filename_format = [input_filename_base].gcode
 596 overhangs = 1
 597 perimeter_acceleration = 0
 598 perimeter_extruder = 1
 599 perimeter_extrusion_width = 0
 600 perimeter_speed = 0
 601 perimeters = 2
 602 post_process =
 603 raft_layers = 0
 604 resolution = 0
 605 seam_position = aligned
 606 skirt_distance = 1
 607 skirt_height = 1
 608 skirts = 2
 609 small_perimeter_speed = 10
 610 solid_infill_below_area = 70
 611 solid_infill_every_layers = 0
 612 solid_infill_extruder = 1
 613 solid_infill_extrusion_width = 0
 614 solid_infill_speed = 0
 615 spiral_vase = 0
 616 standby_temperature_delta = -5
 617 support_material = 0
 618 support_material_angle = 0
 619 support_material_contact_distance = 0.2
 620 support_material_enforce_layers = 0
 621 support_material_extruder = 1
 622 support_material_extrusion_width = 0
 623 support_material_interface_extruder = 1
 624 support_material_interface_layers = 2
 625 support_material_interface_spacing = 0
 626 support_material_interface_speed = 100%
 627 support_material_pattern = rectilinear
 628 support_material_spacing = 5
 629 support_material_speed = 60
 630 support_material_threshold = 40
 631 thin_walls = 1
 632 threads = 2
 633 top_infill_extrusion_width = 0
 634 top_solid_infill_speed = 20
 635 top_solid_layers = 3
 636 travel_speed = 100
 637 xy_size_compensation = 0
 638
 639 [print:MendelPro support]
 640 avoid_crossing_perimeters = 0
 641 bottom_solid_layers = 3
 642 bridge_acceleration = 0
 643 bridge_flow_ratio = 1
 644 bridge_speed = 40
 645 brim_width = 3
 646 complete_objects = 0
 647 default_acceleration = 0
 648 dont_support_bridges = 1
 649 external_fill_pattern = rectilinear
 650 external_perimeter_extrusion_width = 0
 651 external_perimeter_speed = 20
 652 external_perimeters_first = 0
 653 extra_perimeters = 1
 654 extruder_clearance_height = 20
 655 extruder_clearance_radius = 20
 656 extrusion_width = 0
 657 fill_angle = 45
 658 fill_density = 15%
 659 fill_pattern = 3dhoneycomb
 660 first_layer_acceleration = 0
 661 first_layer_extrusion_width = 0
 662 first_layer_height = 0.2
 663 first_layer_speed = 10
 664 gap_fill_speed = 10
 665 gcode_comments = 0
 666 infill_acceleration = 0
 667 infill_every_layers = 1
 668 infill_extruder = 1
 669 infill_extrusion_width = 0
 670 infill_first = 0
 671 infill_only_where_needed = 0
 672 infill_overlap = 15%
 673 infill_speed = 0
 674 interface_shells = 0
 675 layer_height = 0.2
 676 max_print_speed = 80
 677 max_volumetric_speed = 0
 678 min_skirt_length = 2
 679 notes =
 680 only_retract_when_crossing_perimeters = 1
 681 ooze_prevention = 0
 682 output_filename_format = [input_filename_base].gcode
 683 overhangs = 1
 684 perimeter_acceleration = 0
 685 perimeter_extruder = 1
 686 perimeter_extrusion_width = 0
 687 perimeter_speed = 0
 688 perimeters = 2
 689 post_process =
 690 raft_layers = 0
 691 resolution = 0
 692 seam_position = aligned
 693 skirt_distance = 1
 694 skirt_height = 1
 695 skirts = 2
 696 small_perimeter_speed = 10
 697 solid_infill_below_area = 70
 698 solid_infill_every_layers = 0
 699 solid_infill_extruder = 1
 700 solid_infill_extrusion_width = 0
 701 solid_infill_speed = 0
 702 spiral_vase = 0
 703 standby_temperature_delta = -5
 704 support_material = 1
 705 support_material_angle = 0
 706 support_material_contact_distance = 0.2
 707 support_material_enforce_layers = 0
 708 support_material_extruder = 1
 709 support_material_extrusion_width = 0
 710 support_material_interface_extruder = 1
 711 support_material_interface_layers = 3
 712 support_material_interface_spacing = 0
 713 support_material_interface_speed = 100%
 714 support_material_pattern = honeycomb
 715 support_material_spacing = 2.5
 716 support_material_speed = 60
 717 support_material_threshold = 40
 718 thin_walls = 1
 719 threads = 2
 720 top_infill_extrusion_width = 0
 721 top_solid_infill_speed = 20
 722 top_solid_layers = 3
 723 travel_speed = 100
 724 xy_size_compensation = 0
 725
 726 [print:TinyBoy]
 727 avoid_crossing_perimeters = 0
 728 bottom_solid_layers = 3
 729 bridge_acceleration = 0
 730 bridge_flow_ratio = 1
 731 bridge_speed = 40
 732 brim_width = 0
 733 complete_objects = 0
 734 default_acceleration = 0
 735 dont_support_bridges = 1
 736 external_fill_pattern = rectilinear
 737 external_perimeter_extrusion_width = 0
 738 external_perimeter_speed = 20
 739 external_perimeters_first = 0
 740 extra_perimeters = 1
 741 extruder_clearance_height = 20
 742 extruder_clearance_radius = 20
 743 extrusion_width = 0
 744 fill_angle = 45
 745 fill_density = 20%
 746 fill_pattern = 3dhoneycomb
 747 first_layer_acceleration = 0
 748 first_layer_extrusion_width = 0
 749 first_layer_height = 0.2
 750 first_layer_speed = 10
 751 gap_fill_speed = 20
 752 gcode_comments = 0
 753 infill_acceleration = 0
 754 infill_every_layers = 1
 755 infill_extruder = 1
 756 infill_extrusion_width = 0
 757 infill_first = 0
 758 infill_only_where_needed = 0
 759 infill_overlap = 15%
 760 infill_speed = 0
 761 interface_shells = 0
 762 layer_height = 0.2
 763 max_print_speed = 80
 764 max_volumetric_speed = 0
 765 min_skirt_length = 1
 766 notes =
 767 only_retract_when_crossing_perimeters = 1
 768 ooze_prevention = 0
 769 output_filename_format = [input_filename_base].gcode
 770 overhangs = 1
 771 perimeter_acceleration = 0
 772 perimeter_extruder = 1
 773 perimeter_extrusion_width = 0
 774 perimeter_speed = 0
 775 perimeters = 2
 776 post_process =
 777 raft_layers = 0
 778 resolution = 0
 779 seam_position = aligned
 780 skirt_distance = 1
 781 skirt_height = 1
 782 skirts = 1
 783 small_perimeter_speed = 0
 784 solid_infill_below_area = 70
 785 solid_infill_every_layers = 0
 786 solid_infill_extruder = 1
 787 solid_infill_extrusion_width = 0
 788 solid_infill_speed = 0
 789 spiral_vase = 0
 790 standby_temperature_delta = -5
 791 support_material = 0
 792 support_material_angle = 0
 793 support_material_contact_distance = 0.2
 794 support_material_enforce_layers = 0
 795 support_material_extruder = 1
 796 support_material_extrusion_width = 0
 797 support_material_interface_extruder = 1
 798 support_material_interface_layers = 2
 799 support_material_interface_spacing = 0
 800 support_material_interface_speed = 100%
 801 support_material_pattern = rectilinear
 802 support_material_spacing = 5
 803 support_material_speed = 0
 804 support_material_threshold = 40
 805 thin_walls = 1
 806 threads = 2
 807 top_infill_extrusion_width = 0
 808 top_solid_infill_speed = 20
 809 top_solid_layers = 4
 810 travel_speed = 100
 811 xy_size_compensation = 0
 812
 813 [print:TinyBoy support]
 814 avoid_crossing_perimeters = 0
 815 bottom_solid_layers = 3
 816 bridge_acceleration = 0
 817 bridge_flow_ratio = 1
 818 bridge_speed = 40
 819 brim_width = 0
 820 complete_objects = 0
 821 default_acceleration = 0
 822 dont_support_bridges = 1
 823 external_fill_pattern = rectilinear
 824 external_perimeter_extrusion_width = 0
 825 external_perimeter_speed = 20
 826 external_perimeters_first = 0
 827 extra_perimeters = 1
 828 extruder_clearance_height = 20
 829 extruder_clearance_radius = 20
 830 extrusion_width = 0
 831 fill_angle = 45
 832 fill_density = 20%
 833 fill_pattern = 3dhoneycomb
 834 first_layer_acceleration = 0
 835 first_layer_extrusion_width = 0
 836 first_layer_height = 0.2
 837 first_layer_speed = 10
 838 gap_fill_speed = 20
 839 gcode_comments = 0
 840 infill_acceleration = 0
 841 infill_every_layers = 1
 842 infill_extruder = 1
 843 infill_extrusion_width = 0
 844 infill_first = 0
 845 infill_only_where_needed = 0
 846 infill_overlap = 15%
 847 infill_speed = 0
 848 interface_shells = 0
 849 layer_height = 0.2
 850 max_print_speed = 80
 851 max_volumetric_speed = 0
 852 min_skirt_length = 1
 853 notes =
 854 only_retract_when_crossing_perimeters = 1
 855 ooze_prevention = 0
 856 output_filename_format = [input_filename_base].gcode
 857 overhangs = 1
 858 perimeter_acceleration = 0
 859 perimeter_extruder = 1
 860 perimeter_extrusion_width = 0
 861 perimeter_speed = 0
 862 perimeters = 2
 863 post_process =
 864 raft_layers = 0
 865 resolution = 0
 866 seam_position = aligned
 867 skirt_distance = 1
 868 skirt_height = 1
 869 skirts = 1
 870 small_perimeter_speed = 0
 871 solid_infill_below_area = 70
 872 solid_infill_every_layers = 0
 873 solid_infill_extruder = 1
 874 solid_infill_extrusion_width = 0
 875 solid_infill_speed = 0
 876 spiral_vase = 0
 877 standby_temperature_delta = -5
 878 support_material = 1
 879 support_material_angle = 0
 880 support_material_contact_distance = 0.3
 881 support_material_enforce_layers = 0
 882 support_material_extruder = 1
 883 support_material_extrusion_width = 0
 884 support_material_interface_extruder = 1
 885 support_material_interface_layers = 2
 886 support_material_interface_spacing = 0
 887 support_material_interface_speed = 100%
 888 support_material_pattern = rectilinear
 889 support_material_spacing = 5
 890 support_material_speed = 0
 891 support_material_threshold = 40
 892 thin_walls = 1
 893 threads = 2
 894 top_infill_extrusion_width = 0
 895 top_solid_infill_speed = 20
 896 top_solid_layers = 4
 897 travel_speed = 100
 898 xy_size_compensation = 0
 899
 900 [print:ToyRep]
 901 avoid_crossing_perimeters = 0
 902 bottom_solid_layers = 2
 903 bridge_acceleration = 0
 904 bridge_flow_ratio = 1
 905 bridge_speed = 0
 906 brim_width = 0
 907 complete_objects = 0
 908 default_acceleration = 0
 909 dont_support_bridges = 1
 910 external_fill_pattern = rectilinear
 911 external_perimeter_extrusion_width = 0
 912 external_perimeter_speed = 0
 913 external_perimeters_first = 0
 914 extra_perimeters = 1
 915 extruder_clearance_height = 20
 916 extruder_clearance_radius = 20
 917 extrusion_width = 0
 918 fill_angle = 45
 919 fill_density = 0%
 920 fill_pattern = rectilinear
 921 first_layer_acceleration = 0
 922 first_layer_extrusion_width = 0
 923 first_layer_height = 0.2
 924 first_layer_speed = 10
 925 gap_fill_speed = 0
 926 gcode_comments = 0
 927 infill_acceleration = 0
 928 infill_every_layers = 1
 929 infill_extruder = 1
 930 infill_extrusion_width = 0
 931 infill_first = 0
 932 infill_only_where_needed = 0
 933 infill_overlap = 15%
 934 infill_speed = 0
 935 interface_shells = 0
 936 layer_height = 0.2
 937 max_print_speed = 10
 938 max_volumetric_speed = 0
 939 min_skirt_length = 1
 940 notes =
 941 only_retract_when_crossing_perimeters = 1
 942 ooze_prevention = 0
 943 output_filename_format = [input_filename_base].gcode
 944 overhangs = 1
 945 perimeter_acceleration = 0
 946 perimeter_extruder = 1
 947 perimeter_extrusion_width = 0
 948 perimeter_speed = 0
 949 perimeters = 2
 950 post_process =
 951 raft_layers = 0
 952 resolution = 0
 953 seam_position = aligned
 954 skirt_distance = 1
 955 skirt_height = 1
 956 skirts = 1
 957 small_perimeter_speed = 0
 958 solid_infill_below_area = 70
 959 solid_infill_every_layers = 0
 960 solid_infill_extruder = 1
 961 solid_infill_extrusion_width = 0
 962 solid_infill_speed = 0
 963 spiral_vase = 0
 964 standby_temperature_delta = -5
 965 support_material = 1
 966 support_material_angle = 0
 967 support_material_contact_distance = 0.3
 968 support_material_enforce_layers = 0
 969 support_material_extruder = 1
 970 support_material_extrusion_width = 0
 971 support_material_interface_extruder = 1
 972 support_material_interface_layers = 3
 973 support_material_interface_spacing = 0
 974 support_material_interface_speed = 100%
 975 support_material_pattern = rectilinear
 976 support_material_spacing = 5
 977 support_material_speed = 0
 978 support_material_threshold = 40
 979 thin_walls = 1
 980 threads = 2
 981 top_infill_extrusion_width = 0
 982 top_solid_infill_speed = 0
 983 top_solid_layers = 0
 984 travel_speed = 100
 985 xy_size_compensation = 0
 986
 987 [print:Prusa i3 200]
 988 avoid_crossing_perimeters = 0
 989 bottom_solid_layers = 3
 990 bridge_acceleration = 0
 991 bridge_flow_ratio = 1
 992 bridge_speed = 40
 993 brim_width = 5
 994 complete_objects = 0
 995 default_acceleration = 0
 996 dont_support_bridges = 1
 997 external_fill_pattern = rectilinear
 998 external_perimeter_extrusion_width = 0
 999 external_perimeter_speed = 20
1000 external_perimeters_first = 0
1001 extra_perimeters = 1
1002 extruder_clearance_height = 20
1003 extruder_clearance_radius = 20
1004 extrusion_width = 0
1005 fill_angle = 45
1006 fill_density = 20%
1007 fill_pattern = 3dhoneycomb
1008 first_layer_acceleration = 0
1009 first_layer_extrusion_width = 0
1010 first_layer_height = 0.2
1011 first_layer_speed = 15
1012 gap_fill_speed = 20
1013 gcode_comments = 0
1014 infill_acceleration = 0
1015 infill_every_layers = 1
1016 infill_extruder = 1
1017 infill_extrusion_width = 0
1018 infill_first = 0
1019 infill_only_where_needed = 0
1020 infill_overlap = 15%
1021 infill_speed = 0
1022 interface_shells = 0
1023 layer_height = 0.2
1024 max_print_speed = 60
1025 max_volumetric_speed = 0
1026 min_skirt_length = 1
1027 notes =
1028 only_retract_when_crossing_perimeters = 1
1029 ooze_prevention = 0
1030 output_filename_format = [input_filename_base].gcode
1031 overhangs = 1
1032 perimeter_acceleration = 0
1033 perimeter_extruder = 1
1034 perimeter_extrusion_width = 0
1035 perimeter_speed = 0
1036 perimeters = 2
1037 post_process =
1038 raft_layers = 0
1039 resolution = 0
1040 seam_position = aligned
1041 skirt_distance = 1
1042 skirt_height = 1
1043 skirts = 1
1044 small_perimeter_speed = 15
1045 solid_infill_below_area = 70
1046 solid_infill_every_layers = 0
1047 solid_infill_extruder = 1
1048 solid_infill_extrusion_width = 0
1049 solid_infill_speed = 0
1050 spiral_vase = 0
1051 standby_temperature_delta = -5
1052 support_material = 0
1053 support_material_angle = 0
1054 support_material_contact_distance = 0
1055 support_material_enforce_layers = 0
1056 support_material_extruder = 1
1057 support_material_extrusion_width = 0
1058 support_material_interface_extruder = 1
1059 support_material_interface_layers = 2
1060 support_material_interface_spacing = 0
1061 support_material_interface_speed = 10
1062 support_material_pattern = pillars
1063 support_material_spacing = 2.5
1064 support_material_speed = 40
1065 support_material_threshold = 40
1066 thin_walls = 1
1067 threads = 2
1068 top_infill_extrusion_width = 0
1069 top_solid_infill_speed = 20
1070 top_solid_layers = 3
1071 travel_speed = 100
1072 xy_size_compensation = 0
1073
1074 [print:Prusa i3 200 support]
1075 avoid_crossing_perimeters = 0
1076 bottom_solid_layers = 3
1077 bridge_acceleration = 0
1078 bridge_flow_ratio = 1
1079 bridge_speed = 40
1080 brim_width = 5
1081 complete_objects = 0
1082 default_acceleration = 0
1083 dont_support_bridges = 1
1084 external_fill_pattern = rectilinear
1085 external_perimeter_extrusion_width = 0
1086 external_perimeter_speed = 20
1087 external_perimeters_first = 0
1088 extra_perimeters = 1
1089 extruder_clearance_height = 20
1090 extruder_clearance_radius = 20
1091 extrusion_width = 0
1092 fill_angle = 45
1093 fill_density = 20%
1094 fill_pattern = 3dhoneycomb
1095 first_layer_acceleration = 0
1096 first_layer_extrusion_width = 0
1097 first_layer_height = 0.2
1098 first_layer_speed = 15
1099 gap_fill_speed = 20
1100 gcode_comments = 0
1101 infill_acceleration = 0
1102 infill_every_layers = 1
1103 infill_extruder = 1
1104 infill_extrusion_width = 0
1105 infill_first = 0
1106 infill_only_where_needed = 0
1107 infill_overlap = 15%
1108 infill_speed = 0
1109 interface_shells = 0
1110 layer_height = 0.2
1111 max_print_speed = 60
1112 max_volumetric_speed = 0
1113 min_skirt_length = 1
1114 notes =
1115 only_retract_when_crossing_perimeters = 1
1116 ooze_prevention = 0
1117 output_filename_format = [input_filename_base].gcode
1118 overhangs = 1
1119 perimeter_acceleration = 0
1120 perimeter_extruder = 1
1121 perimeter_extrusion_width = 0
1122 perimeter_speed = 0
1123 perimeters = 2
1124 post_process =
1125 raft_layers = 1
1126 resolution = 0
1127 seam_position = aligned
1128 skirt_distance = 1
1129 skirt_height = 1
1130 skirts = 1
1131 small_perimeter_speed = 15
1132 solid_infill_below_area = 70
1133 solid_infill_every_layers = 0
1134 solid_infill_extruder = 1
1135 solid_infill_extrusion_width = 0
1136 solid_infill_speed = 0
1137 spiral_vase = 0
1138 standby_temperature_delta = -5
1139 support_material = 1
1140 support_material_angle = 0
1141 support_material_contact_distance = 0.2
1142 support_material_enforce_layers = 0
1143 support_material_extruder = 1
1144 support_material_extrusion_width = 0
1145 support_material_interface_extruder = 1
1146 support_material_interface_layers = 2
1147 support_material_interface_spacing = 0
1148 support_material_interface_speed = 10
1149 support_material_pattern = pillars
1150 support_material_spacing = 2.5
1151 support_material_speed = 40
1152 support_material_threshold = 40
1153 thin_walls = 1
1154 threads = 2
1155 top_infill_extrusion_width = 0
1156 top_solid_infill_speed = 20
1157 top_solid_layers = 3
1158 travel_speed = 100
1159 xy_size_compensation = 0
1160
1161 [printer:LulzBot]
1162 bed_shape = 0x0,298x0,298x275,0x275
1163 before_layer_gcode =
1164 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors
1165 extruder_offset = 0x0
1166 gcode_flavor = reprap
1167 layer_gcode =
1168 nozzle_diameter = 0.35
1169 octoprint_apikey =
1170 octoprint_host =
1171 pressure_advance = 0
1172 retract_before_travel = 2
1173 retract_layer_change = 1
1174 retract_length = 2
1175 retract_length_toolchange = 3
1176 retract_lift = 0
1177 retract_restart_extra = 0
1178 retract_restart_extra_toolchange = 0
1179 retract_speed = 20
1180 start_gcode = G28 ; home all axes\n
1181 toolchange_gcode =
1182 use_firmware_retraction = 0
1183 use_relative_e_distances = 0
1184 use_volumetric_e = 0
1185 vibration_limit = 0
1186 wipe = 0
1187 z_offset = 0
1188
1189 [printer:MendelPro]
1190 bed_shape = 0x0,220x0,220x177,0x177
1191 before_layer_gcode =
1192 end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n
1193 extruder_offset = 0x0
1194 gcode_flavor = reprap
1195 layer_gcode =
1196 nozzle_diameter = 0.5
1197 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
1198 octoprint_host =
1199 pressure_advance = 0
1200 retract_before_travel = 2
1201 retract_layer_change = 1
1202 retract_length = 5
1203 retract_length_toolchange = 10
1204 retract_lift = 0
1205 retract_restart_extra = 0
1206 retract_restart_extra_toolchange = 0
1207 retract_speed = 40
1208 start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
1209 toolchange_gcode =
1210 use_firmware_retraction = 0
1211 use_relative_e_distances = 0
1212 use_volumetric_e = 0
1213 vibration_limit = 0
1214 wipe = 0
1215 z_offset = 0
1216
1217 [printer:TinyBoy]
1218 bed_shape = 0x0,88x0,88x74,0x74
1219 before_layer_gcode =
1220 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nM84               ; disable motors\n
1221 extruder_offset = 0x0
1222 gcode_flavor = reprap
1223 layer_gcode =
1224 nozzle_diameter = 0.4
1225 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
1226 octoprint_host =
1227 pressure_advance = 0
1228 retract_before_travel = 2
1229 retract_layer_change = 1
1230 retract_length = 5
1231 retract_length_toolchange = 10
1232 retract_lift = 0
1233 retract_restart_extra = 0
1234 retract_restart_extra_toolchange = 0
1235 retract_speed = 40
1236 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
1237 toolchange_gcode =
1238 use_firmware_retraction = 0
1239 use_relative_e_distances = 0
1240 use_volumetric_e = 0
1241 vibration_limit = 0
1242 wipe = 0
1243 z_offset = 0
1244
1245 [printer:ToyRep]
1246 bed_shape = 0x0,125x0,125x125,0x125
1247 before_layer_gcode =
1248 end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
1249 extruder_offset = 0x0
1250 gcode_flavor = reprap
1251 layer_gcode =
1252 nozzle_diameter = 0.4
1253 octoprint_apikey =
1254 octoprint_host =
1255 pressure_advance = 0
1256 retract_before_travel = 2
1257 retract_layer_change = 1
1258 retract_length = 0
1259 retract_length_toolchange = 3
1260 retract_lift = 0
1261 retract_restart_extra = 0
1262 retract_restart_extra_toolchange = 0
1263 retract_speed = 10
1264 start_gcode = \n
1265 toolchange_gcode =
1266 use_firmware_retraction = 0
1267 use_relative_e_distances = 0
1268 use_volumetric_e = 0
1269 vibration_limit = 0
1270 wipe = 0
1271 z_offset = 0
1272
1273 [printer:Prusa i3]
1274 bed_shape = 0x0,190x0,190x190,0x190
1275 before_layer_gcode =
1276 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n
1277 extruder_offset = 0x0
1278 gcode_flavor = reprap
1279 layer_gcode =
1280 nozzle_diameter = 0.4
1281 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
1282 octoprint_host =
1283 pressure_advance = 0
1284 retract_before_travel = 2
1285 retract_layer_change = 1
1286 retract_length = 5
1287 retract_length_toolchange = 10
1288 retract_lift = 0
1289 retract_restart_extra = 0
1290 retract_restart_extra_toolchange = 0
1291 retract_speed = 40
1292 start_gcode = G28 Z            ; home Z\nG0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0         Y40 ; clab move
1293 toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer
1294 use_firmware_retraction = 0
1295 use_relative_e_distances = 0
1296 use_volumetric_e = 0
1297 vibration_limit = 0
1298 wipe = 0
1299 z_offset = 0
1300
1301 [settings]
1302 autocenter = 1
1303 mode = expert