RepRap%2FConfigs%2FSlic3r.mw

   1 Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck (Foto)
   2
   3 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
   4
   5 === aktuelle configs ===
   6 Der Drucker hat sich verändert, dementsprechend haben sich auch die configs geändert.
   7 Beispielsweise haben wir jetzt 0.5 mm Düsen an den beiden Hot Ends, nicht mehr 0.35 mm.
   8 Dazu kommt, dass das homing konstruktionsbedingt außerhalb des hot beds stattfindet, mit diesem Start-gcode wird das ausgeglichen:
   9  G28 X0 Y0 ; home X and Y
  10  G0 X60; move to X60
  11  G92 X0; set postition to X=0
  12  G28 Z0; home Z
  13 Das, oder etwas Ähnliches sollte in allen configs mit drin sein.
  14
  15 Eine funktionierende, aber noch nicht sehr fein justierte config ist diese:
  16 ==== larsan ====
  17 <pre style="height:200px;overflow:scroll;">
  18 # generated by Slic3r 0.9.10 on Sun Sep 29 22:51:39 2013
  19 avoid_crossing_perimeters = 0
  20 bed_size = 190,190
  21 bed_temperature = 50
  22 bottom_solid_layers = 3
  23 bridge_acceleration = 0
  24 bridge_fan_speed = 100
  25 bridge_flow_ratio = 1
  26 bridge_speed = 60
  27 brim_width = 0
  28 complete_objects = 1
  29 cooling = 1
  30 default_acceleration = 0
  31 disable_fan_first_layers = 1
  32 duplicate = 1
  33 duplicate_distance = 6
  34 duplicate_grid = 1,1
  35 end_gcode = M104 S0 ; turn off extruder temperature\n;M140 S0 ; turn off bed temperature; currently disabled\nG0 X0    ; move X axis to 0\nG92 Z0 E5 ;define current point as Z0 E5\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y198 F6000 ; drive print table all the way out\nM84     ; disable motors
  36 external_perimeter_speed = 70%
  37 external_perimeters_first = 0
  38 extra_perimeters = 1
  39 extruder_clearance_height = 1
  40 extruder_clearance_radius = 30
  41 extruder_offset = 0x0
  42 extrusion_axis = E
  43 extrusion_multiplier = 1
  44 extrusion_width = 180%
  45 fan_always_on = 0
  46 fan_below_layer_time = 60
  47 filament_diameter = 1.75
  48 fill_angle = 45
  49 fill_density = 0.3
  50 fill_pattern = honeycomb
  51 first_layer_bed_temperature = 50
  52 first_layer_extrusion_width = 0
  53 first_layer_height = 0.25
  54 first_layer_speed = 30%
  55 first_layer_temperature = 200
  56 g0 = 0
  57 gap_fill_speed = 15
  58 gcode_arcs = 0
  59 gcode_comments = 0
  60 gcode_flavor = reprap
  61 infill_acceleration = 0
  62 infill_every_layers = 1
  63 infill_extruder = 1
  64 infill_extrusion_width = 0
  65 infill_first = 0
  66 infill_only_where_needed = 0
  67 infill_speed = 60
  68 layer_gcode =
  69 layer_height = 0.25
  70 max_fan_speed = 100
  71 min_fan_speed = 35
  72 min_print_speed = 5
  73 min_skirt_length = 0
  74 notes = larsanconfig
  75 nozzle_diameter = 0.5
  76 only_retract_when_crossing_perimeters = 1
  77 output_filename_format = [input_filename_base].gcode
  78 perimeter_acceleration = 0
  79 perimeter_extruder = 1
  80 perimeter_extrusion_width = 0
  81 perimeter_speed = 80
  82 perimeters = 3
  83 post_process =
  84 print_center = 90,60
  85 raft_layers = 0
  86 randomize_start = 0
  87 resolution = 0
  88 retract_before_travel = 2
  89 retract_layer_change = 1
  90 retract_length = 2
  91 retract_length_toolchange = 10
  92 retract_lift = 0
  93 retract_restart_extra = 0
  94 retract_restart_extra_toolchange = 0
  95 retract_speed = 35
  96 rotate = 0
  97 scale = 1
  98 skirt_distance = 10
  99 skirt_height = 1
 100 skirts = 3
 101 slowdown_below_layer_time = 30
 102 small_perimeter_speed = 50
 103 solid_fill_pattern = rectilinear
 104 solid_infill_below_area = 40
 105 solid_infill_every_layers = 0
 106 solid_infill_extrusion_width = 0
 107 solid_infill_speed = 80
 108 spiral_vase = 0
 109 start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG28 Z0; home Z
 110 support_material = 0
 111 support_material_angle = 0
 112 support_material_enforce_layers = 0
 113 support_material_extruder = 1
 114 support_material_extrusion_width = 0
 115 support_material_interface_layers = 0
 116 support_material_interface_spacing = 0
 117 support_material_pattern = rectilinear
 118 support_material_spacing = 2.5
 119 support_material_speed = 65
 120 support_material_threshold = 0
 121 temperature = 195
 122 threads = 1
 123 toolchange_gcode =
 124 top_infill_extrusion_width = 0
 125 top_solid_infill_speed = 60
 126 top_solid_layers = 3
 127 travel_speed = 80
 128 use_relative_e_distances = 0
 129 vibration_limit = 0
 130 wipe = 0
 131 z_offset = 0
 132 </pre>
 133 === alte configs ===
 134
 135 ==== Von larsan ====
 136 Ursprünglich die erste Konfiguration für unseren Drucker auf Basis von {{Benutzer|DanielWillmann}}s Konfiguration.
 137
 138 Von der unten stehenden Config gibt es eine verbesserte [https://rohieb.name/stuff/stratum0/larsan-tuned.ini larsan-tuned.ini], die Rohieb gemacht hat.
 139
 140 <pre style="height:200px;overflow:scroll;">
 141 # generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012
 142 acceleration = 0
 143 bed_size = 180,200
 144 bed_temperature = 50
 145 bottom_solid_layers = 3
 146 bridge_fan_speed = 100
 147 bridge_flow_ratio = 1
 148 bridge_speed = 60
 149 brim_width = 0
 150 complete_objects =
 151 cooling =
 152 disable_fan_first_layers = 1
 153 duplicate = 1
 154 duplicate_distance = 6
 155 duplicate_grid = 1,1
 156 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 157 external_perimeter_speed = 40%
 158 extra_perimeters = 1
 159 extruder_clearance_height = 20
 160 extruder_clearance_radius = 30
 161 extruder_offset = 0x0
 162 extrusion_axis = E
 163 extrusion_multiplier = 1
 164 extrusion_width = 0
 165 fan_always_on = 0
 166 fan_below_layer_time = 60
 167 filament_diameter = 1.75
 168 fill_angle = 0
 169 fill_density = 0.15
 170 fill_pattern = honeycomb
 171 first_layer_bed_temperature = 50
 172 first_layer_extrusion_width = 0
 173 first_layer_height = 0.27
 174 first_layer_speed = 15%
 175 first_layer_temperature = 195
 176 g0 = 0
 177 gap_fill_speed = 20
 178 gcode_arcs = 0
 179 gcode_comments = 0
 180 gcode_flavor = reprap
 181 infill_acceleration = 50
 182 infill_every_layers = 1
 183 infill_extruder = 1
 184 infill_extrusion_width = 0
 185 infill_speed = 60
 186 layer_gcode =
 187 layer_height = 0.24
 188 max_fan_speed = 100
 189 min_fan_speed = 35
 190 min_print_speed = 5
 191 min_skirt_length = 0
 192 notes = larsanconfig
 193 nozzle_diameter = 0.35
 194 only_retract_when_crossing_perimeters =
 195 output_filename_format = [input_filename_base].gcode
 196 perimeter_acceleration = 25
 197 perimeter_extruder = 1
 198 perimeter_extrusion_width = 0
 199 perimeter_speed = 50
 200 perimeters = 3
 201 post_process =
 202 print_center = 90,100
 203 randomize_start = 1
 204 retract_before_travel = 5
 205 retract_length = 2
 206 retract_length_toolchange = 3
 207 retract_lift = 0
 208 retract_restart_extra = 0.01
 209 retract_restart_extra_toolchange = 0
 210 retract_speed = 50
 211 rotate = 0
 212 scale = 1
 213 skirt_distance = 20
 214 skirt_height = 1
 215 skirts = 3
 216 slowdown_below_layer_time = 50
 217 small_perimeter_speed = 100%
 218 solid_fill_pattern = rectilinear
 219 solid_infill_below_area = 0
 220 solid_infill_every_layers = 0
 221 solid_infill_speed = 90%
 222 start_gcode = G28 ; home all axes\nM92 E820
 223 support_material =
 224 support_material_angle = 45
 225 support_material_extruder = 1
 226 support_material_extrusion_width = 0
 227 support_material_pattern = rectilinear
 228 support_material_spacing = 2
 229 support_material_speed = 60
 230 support_material_threshold = 41
 231 temperature = 185
 232 threads = 2
 233 top_solid_infill_speed = 70%
 234 top_solid_layers = 3
 235 travel_speed = 50
 236 use_relative_e_distances = 0
 237 vibration_limit = 0
 238 z_offset = 0
 239 </pre>
 240
 241 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
 242 Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
 243 <pre style="height:200px;overflow:scroll;">
 244 # generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
 245 acceleration = 0
 246 bed_size = 180,200
 247 bed_temperature = 60
 248 bridge_fan_speed = 100
 249 bridge_flow_ratio = 1
 250 bridge_speed = 350
 251 brim_width = 0
 252 complete_objects = 0
 253 cooling = 1
 254 disable_fan_first_layers = 1
 255 duplicate = 1
 256 duplicate_distance = 6
 257 duplicate_grid = 1,1
 258 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 259 external_perimeter_speed = 90%
 260 extra_perimeters = 1
 261 extruder_clearance_height = 20
 262 extruder_clearance_radius = 20
 263 extruder_offset = 0x0
 264 extrusion_axis = E
 265 extrusion_multiplier = 1.0
 266 extrusion_width = 0
 267 fan_always_on = 0
 268 fan_below_layer_time = 60
 269 filament_diameter = 1.75
 270 fill_angle = 0
 271 fill_density = 0.2
 272 fill_pattern = rectilinear
 273 first_layer_bed_temperature = 60
 274 first_layer_extrusion_width = 0
 275 first_layer_height = 100%
 276 first_layer_speed = 20%
 277 first_layer_temperature = 195
 278 g0 = 0
 279 gcode_arcs = 0
 280 gcode_comments = 0
 281 gcode_flavor = reprap
 282 infill_acceleration = 50
 283 infill_every_layers = 1
 284 infill_extruder = 1
 285 infill_extrusion_width = 0
 286 infill_speed = 120
 287 layer_gcode =
 288 layer_height = 0.25
 289 max_fan_speed = 100
 290 min_fan_speed = 35
 291 min_print_speed = 10
 292 notes = Used for Mate name tag
 293 nozzle_diameter = 0.35
 294 only_retract_when_crossing_perimeters = 0
 295 output_filename_format = [input_filename_base].gcode
 296 perimeter_acceleration = 25
 297 perimeter_extruder = 1
 298 perimeter_extrusion_width = 0
 299 perimeter_speed = 100
 300 perimeters = 2
 301 post_process =
 302 print_center = 90,100
 303 randomize_start = 1
 304 retract_before_travel = 4
 305 retract_length = 4
 306 retract_length_toolchange = 3
 307 retract_lift = 0.5
 308 retract_restart_extra = 0
 309 retract_restart_extra_toolchange = 0
 310 retract_speed = 150
 311 rotate = 0
 312 scale = 1
 313 skirt_distance = 10
 314 skirt_height = 1
 315 skirts = 2
 316 slowdown_below_layer_time = 60
 317 small_perimeter_speed = 80%
 318 solid_fill_pattern = rectilinear
 319 solid_infill_below_area = 0
 320 solid_infill_every_layers = 0
 321 solid_infill_speed = 100%
 322 solid_layers = 3
 323 start_gcode = G28 ; home all axes\nM92 E820
 324 support_material = 1
 325 support_material_angle = 45
 326 support_material_extruder = 1
 327 support_material_extrusion_width = 0
 328 support_material_pattern = rectilinear
 329 support_material_spacing = 3
 330 support_material_threshold = 45
 331 temperature = 185
 332 threads = 3
 333 top_solid_infill_speed = 50%
 334 travel_speed = 140
 335 use_relative_e_distances = 0
 336 z_offset = 0.22
 337 </pre>
 338
 339 ==== Für Mate-Tags ====
 340 Konfiguration für Mate-Tags
 341 <pre style="height:200px;overflow:scroll;">
 342 # generated by Slic3r 0.9.9-dev on Fri Jun  7 23:59:05 2013
 343 avoid_crossing_perimeters = 1
 344 bed_size = 180,200
 345 bed_temperature = 50
 346 bottom_solid_layers = 3
 347 bridge_acceleration = 0
 348 bridge_fan_speed = 100
 349 bridge_flow_ratio = 1
 350 bridge_speed = 50
 351 brim_width = 0
 352 complete_objects = 1
 353 cooling =
 354 default_acceleration = 0
 355 disable_fan_first_layers = 1
 356 duplicate = 1
 357 duplicate_distance = 6
 358 duplicate_grid = 1,1
 359 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 360 external_perimeter_speed = 50%
 361 external_perimeters_first = 0
 362 extra_perimeters =
 363 extruder_clearance_height = 36
 364 extruder_clearance_radius = 40
 365 extruder_offset = 0x0
 366 extrusion_axis = E
 367 extrusion_multiplier = 1.1
 368 extrusion_width = 0
 369 fan_always_on = 0
 370 fan_below_layer_time = 60
 371 filament_diameter = 1.75
 372 fill_angle = 30
 373 fill_density = 0.3
 374 fill_pattern = rectilinear
 375 first_layer_bed_temperature = 50
 376 first_layer_extrusion_width = 0
 377 first_layer_height = 0.27
 378 first_layer_speed = 40%
 379 first_layer_temperature = 197
 380 g0 = 0
 381 gap_fill_speed = 20
 382 gcode_arcs = 0
 383 gcode_comments = 0
 384 gcode_flavor = reprap
 385 infill_acceleration = 0
 386 infill_every_layers = 1
 387 infill_extruder = 1
 388 infill_extrusion_width = 0
 389 infill_first = 0
 390 infill_only_where_needed = 0
 391 infill_speed = 70
 392 layer_gcode =
 393 layer_height = 0.24
 394 max_fan_speed = 100
 395 min_fan_speed = 35
 396 min_print_speed = 5
 397 min_skirt_length = 10
 398 notes = Config used for bottle name tags (http://www.thingiverse.com/thing:38861)
 399 nozzle_diameter = 0.33
 400 only_retract_when_crossing_perimeters = 1
 401 output_filename_format = [input_filename_base].gcode
 402 perimeter_acceleration = 0
 403 perimeter_extruder = 1
 404 perimeter_extrusion_width = 0
 405 perimeter_speed = 50
 406 perimeters = 2
 407 post_process =
 408 print_center = 90,100
 409 raft_layers = 0
 410 randomize_start =
 411 resolution = 0
 412 retract_before_travel = 0
 413 retract_layer_change = 1
 414 retract_length = 2
 415 retract_length_toolchange = 5
 416 retract_lift = 0
 417 retract_restart_extra = 0
 418 retract_restart_extra_toolchange = 0
 419 retract_speed = 50
 420 rotate = 0
 421 scale = 1
 422 skirt_distance = 5
 423 skirt_height = 1
 424 skirts = 2
 425 slowdown_below_layer_time = 50
 426 small_perimeter_speed = 60%
 427 solid_fill_pattern = rectilinear
 428 solid_infill_below_area = 0
 429 solid_infill_every_layers = 0
 430 solid_infill_extrusion_width = 0
 431 solid_infill_speed = 100%
 432 start_gcode = G28 ; home all axes\nM92 E820
 433 support_material =
 434 support_material_angle = 45
 435 support_material_enforce_layers = 0
 436 support_material_extruder = 1
 437 support_material_extrusion_width = 0
 438 support_material_interface_layers = 0
 439 support_material_interface_spacing = 0
 440 support_material_pattern = rectilinear
 441 support_material_spacing = 2
 442 support_material_speed = 70
 443 support_material_threshold = 41
 444 temperature = 188
 445 threads = 2
 446 toolchange_gcode =
 447 top_infill_extrusion_width = 0
 448 top_solid_infill_speed = 70%
 449 top_solid_layers = 3
 450 travel_speed = 50
 451 use_relative_e_distances = 0
 452 vibration_limit = 0
 453 z_offset = 0
 454 </pre>
 455
 456 ==== von Chrissi^ ====
 457 * Nette Konfiguration zum Drucken von allem möglichen.
 458 * First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
 459 * First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
 460 <pre  style="height:200px;overflow:scroll;">
 461 # generated by Slic3r 0.9.3 on Tue Nov  6 21:53:43 2012
 462 acceleration = 0
 463 bed_size = 180,200
 464 bed_temperature = 60
 465 bridge_fan_speed = 100
 466 bridge_flow_ratio = 1.05
 467 bridge_speed = 60
 468 brim_width = 0
 469 complete_objects =
 470 cooling = 1
 471 disable_fan_first_layers = 1
 472 duplicate = 1
 473 duplicate_distance = 6
 474 duplicate_grid = 1,1
 475 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 476 external_perimeter_speed = 100%
 477 extra_perimeters = 1
 478 extruder_clearance_height = 20
 479 extruder_clearance_radius = 30
 480 extruder_offset = 0x0
 481 extrusion_axis = E
 482 extrusion_multiplier = 1
 483 extrusion_width = 100%
 484 fan_always_on = 0
 485 fan_below_layer_time = 60
 486 filament_diameter = 1.75
 487 fill_angle = 45
 488 fill_density = 0.1
 489 fill_pattern = rectilinear
 490 first_layer_bed_temperature = 60
 491 first_layer_extrusion_width = 112%
 492 first_layer_height = 95%
 493 first_layer_speed = 15%
 494 first_layer_temperature = 200
 495 g0 = 0
 496 gcode_arcs = 0
 497 gcode_comments = 0
 498 gcode_flavor = reprap
 499 infill_acceleration = 50
 500 infill_every_layers = 1
 501 infill_extruder = 1
 502 infill_extrusion_width = 120%
 503 infill_speed = 60
 504 layer_gcode =
 505 layer_height = 0.3
 506 max_fan_speed = 100
 507 min_fan_speed = 35
 508 min_print_speed = 5
 509 notes = larsanconfig
 510 nozzle_diameter = 0.35
 511 only_retract_when_crossing_perimeters = 1
 512 output_filename_format = [timestamp]_[input_filename_base].gcode
 513 perimeter_acceleration = 25
 514 perimeter_extruder = 1
 515 perimeter_extrusion_width = 0
 516 perimeter_speed = 60
 517 perimeters = 2
 518 post_process =
 519 print_center = 120,120
 520 randomize_start = 1
 521 retract_before_travel = 4
 522 retract_length = 2
 523 retract_length_toolchange = 3
 524 retract_lift = 0
 525 retract_restart_extra = 0
 526 retract_restart_extra_toolchange = 0
 527 retract_speed = 50
 528 rotate = 0
 529 scale = 1
 530 skirt_distance = 10
 531 skirt_height = 1
 532 skirts = 3
 533 slowdown_below_layer_time = 50
 534 small_perimeter_speed = 50%
 535 solid_fill_pattern = rectilinear
 536 solid_infill_below_area = 0
 537 solid_infill_every_layers = 0
 538 solid_infill_speed = 100%
 539 solid_layers = 3
 540 start_gcode = G28 ; home all axes\nM92 E820
 541 support_material = 1
 542 support_material_angle = 45
 543 support_material_extruder = 1
 544 support_material_extrusion_width = 160%
 545 support_material_pattern = rectilinear
 546 support_material_spacing = 2
 547 support_material_threshold = 40
 548 temperature = 205
 549 threads = 2
 550 top_solid_infill_speed = 40%
 551 travel_speed = 90
 552 use_relative_e_distances = 0
 553 z_offset = 0
 554 </pre>
 555
 556 ==== Gelbes Filament ====
 557 * Ursprünglich für [[Reprap/Parent]] erstellt
 558 * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
 559 * etwas wärmer (195°C)
 560 * 0.22 mm z-offeset
 561 <pre style="height:200px;overflow:scroll;">
 562 acceleration = 0
 563 bed_size = 170,170
 564 bed_temperature = 60
 565 bridge_fan_speed = 100
 566 bridge_flow_ratio = 1
 567 bridge_speed = 30
 568 brim_width = 0
 569 complete_objects = 0
 570 cooling = 1
 571 disable_fan_first_layers = 1
 572 duplicate = 1
 573 duplicate_distance = 6
 574 duplicate_grid = 1,1
 575 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 576 external_perimeter_speed = 90%
 577 extra_perimeters = 1
 578 extruder_clearance_height = 20
 579 extruder_clearance_radius = 20
 580 extrusion_axis = E
 581 extrusion_multiplier = 1
 582 extrusion_width = 0
 583 fan_always_on = 0
 584 fan_below_layer_time = 60
 585 filament_diameter = 3
 586 fill_angle = 45
 587 fill_density = 0.15
 588 fill_pattern = rectilinear
 589 first_layer_bed_temperature = 60
 590 first_layer_extrusion_width = 0
 591 first_layer_height = 115%
 592 first_layer_speed = 80%
 593 first_layer_temperature = 200
 594 g0 = 0
 595 gcode_arcs = 0
 596 gcode_comments = 0
 597 gcode_flavor = reprap
 598 infill_acceleration = 50
 599 infill_every_layers = 1
 600 infill_extruder = 1
 601 infill_extrusion_width = 0
 602 infill_speed = 40
 603 layer_gcode =
 604 layer_height = 0.28
 605 max_fan_speed = 100
 606 min_fan_speed = 35
 607 min_print_speed = 10
 608 notes = Used for Mate name tag
 609 nozzle_diameter = 0.35
 610 output_filename_format = [input_filename_base].gcode
 611 perimeter_acceleration = 25
 612 perimeter_speed = 30
 613 perimeters = 3
 614 perimeters_extruder = 1
 615 perimeters_extrusion_width = 0
 616 post_process =
 617 print_center = 50,27
 618 randomize_start = 1
 619 retract_before_travel = 4
 620 retract_length = 3
 621 retract_lift = 0.4
 622 retract_restart_extra = 0
 623 retract_speed = 30
 624 rotate = 0
 625 scale = 1
 626 skirt_distance = 6
 627 skirt_height = 1
 628 skirts = 3
 629 slowdown_below_layer_time = 60
 630 small_perimeter_speed = 30
 631 solid_fill_pattern = rectilinear
 632 solid_infill_speed = 40
 633 solid_layers = 3
 634 start_gcode = G28 ; home all axes\nM92 E820
 635 support_material =
 636 support_material_angle = 45
 637 support_material_extruder = 1
 638 support_material_extrusion_width = 0
 639 support_material_pattern = rectilinear
 640 support_material_spacing = 2.5
 641 support_material_threshold = 45
 642 temperature = 195
 643 threads = 2
 644 top_solid_infill_speed = 40
 645 travel_speed = 130
 646 use_relative_e_distances = 0
 647 z_offset = 0.22
 648 </pre>
 649
 650 ==== RepRap-Config ====
 651 Konfiguration, mit der die Teile für den RepRap vom [http://netz39.eu Netz39] gedruckt wurden.
 652 <pre style="height:200px;overflow:scroll;">
 653 # generated by Slic3r 0.9.9-dev on Mon Jun  3 17:06:48 2013
 654 avoid_crossing_perimeters = 0
 655 bed_size = 180,200
 656 bed_temperature = 50
 657 bottom_solid_layers = 5
 658 bridge_acceleration = 0
 659 bridge_fan_speed = 100
 660 bridge_flow_ratio = 1
 661 bridge_speed = 30
 662 brim_width = 0
 663 complete_objects = 1
 664 cooling =
 665 default_acceleration = 0
 666 disable_fan_first_layers = 1
 667 duplicate = 1
 668 duplicate_distance = 6
 669 duplicate_grid = 1,1
 670 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 671 external_perimeter_speed = 40%
 672 external_perimeters_first = 0
 673 extra_perimeters =
 674 extruder_clearance_height = 35
 675 extruder_clearance_radius = 62
 676 extruder_offset = 0x0
 677 extrusion_axis = E
 678 extrusion_multiplier = 1.1
 679 extrusion_width = 0
 680 fan_always_on = 0
 681 fan_below_layer_time = 60
 682 filament_diameter = 1.75
 683 fill_angle = 30
 684 fill_density = 0.5
 685 fill_pattern = rectilinear
 686 first_layer_bed_temperature = 50
 687 first_layer_extrusion_width = 0
 688 first_layer_height = 150%
 689 first_layer_speed = 40%
 690 first_layer_temperature = 197
 691 g0 = 0
 692 gap_fill_speed = 20
 693 gcode_arcs = 0
 694 gcode_comments = 0
 695 gcode_flavor = reprap
 696 infill_acceleration = 0
 697 infill_every_layers = 1
 698 infill_extruder = 1
 699 infill_extrusion_width = 0
 700 infill_first = 0
 701 infill_only_where_needed = 0
 702 infill_speed = 60
 703 layer_gcode =
 704 layer_height = 0.2
 705 max_fan_speed = 100
 706 min_fan_speed = 35
 707 min_print_speed = 5
 708 min_skirt_length = 15
 709 notes = config for printing netz39 pieces
 710 nozzle_diameter = 0.33
 711 only_retract_when_crossing_perimeters = 1
 712 output_filename_format = [input_filename_base].gcode
 713 perimeter_acceleration = 0
 714 perimeter_extruder = 1
 715 perimeter_extrusion_width = 0
 716 perimeter_speed = 60
 717 perimeters = 3
 718 post_process =
 719 print_center = 90,100
 720 raft_layers = 0
 721 randomize_start =
 722 resolution = 0
 723 retract_before_travel = 0
 724 retract_layer_change = 1
 725 retract_length = 2
 726 retract_length_toolchange = 5
 727 retract_lift = 0
 728 retract_restart_extra = 0
 729 retract_restart_extra_toolchange = 0
 730 retract_speed = 50
 731 rotate = 0
 732 scale = 1
 733 skirt_distance = 5
 734 skirt_height = 1
 735 skirts = 2
 736 slowdown_below_layer_time = 50
 737 small_perimeter_speed = 60%
 738 solid_fill_pattern = rectilinear
 739 solid_infill_below_area = 0
 740 solid_infill_every_layers = 0
 741 solid_infill_extrusion_width = 0
 742 solid_infill_speed = 100%
 743 start_gcode = G28 ; home all axes\nM92 E820
 744 support_material =
 745 support_material_angle = 45
 746 support_material_enforce_layers = 0
 747 support_material_extruder = 1
 748 support_material_extrusion_width = 0
 749 support_material_interface_layers = 0
 750 support_material_interface_spacing = 0
 751 support_material_pattern = rectilinear
 752 support_material_spacing = 2
 753 support_material_speed = 60
 754 support_material_threshold = 41
 755 temperature = 188
 756 threads = 2
 757 toolchange_gcode =
 758 top_infill_extrusion_width = 0
 759 top_solid_infill_speed = 70%
 760 top_solid_layers = 5
 761 travel_speed = 100
 762 use_relative_e_distances = 0
 763 vibration_limit = 0
 764 z_offset = 0
 765 </pre>
 766
 767 [[Kategorie:RepRap]]