3D-Drucker%2FSlicerBundle.ini.mw

   1 # generated by Slic3r 1.2.9 on Mon Jan 30 16:49:14 2017
   2
   3 [filament:1.75mm ABS]
   4 bed_temperature = 0
   5 bridge_fan_speed = 35
   6 cooling = 1
   7 disable_fan_first_layers = 1
   8 extrusion_multiplier = 1
   9 fan_always_on = 0
  10 fan_below_layer_time = 60
  11 filament_colour = #FFFFFF
  12 filament_diameter = 1.75
  13 first_layer_bed_temperature = 0
  14 first_layer_temperature = 250
  15 max_fan_speed = 0
  16 min_fan_speed = 0
  17 min_print_speed = 5
  18 slowdown_below_layer_time = 10
  19 temperature = 230
  20
  21 [filament:1.75mm Holz]
  22 bed_temperature = 50
  23 bridge_fan_speed = 100
  24 cooling = 1
  25 disable_fan_first_layers = 1
  26 extrusion_multiplier = 1
  27 fan_always_on = 1
  28 fan_below_layer_time = 60
  29 filament_colour = #FFFFFF
  30 filament_diameter = 1.75
  31 first_layer_bed_temperature = 50
  32 first_layer_temperature = 200
  33 max_fan_speed = 100
  34 min_fan_speed = 50
  35 min_print_speed = 5
  36 slowdown_below_layer_time = 10
  37 temperature = 190
  38
  39 [filament:1.75mm PLA]
  40 bed_temperature = 50
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 3
  44 extrusion_multiplier = 1
  45 fan_always_on = 0
  46 fan_below_layer_time = 60
  47 filament_colour = #FFFFFF
  48 filament_diameter = 1.75
  49 first_layer_bed_temperature = 50
  50 first_layer_temperature = 220
  51 max_fan_speed = 100
  52 min_fan_speed = 100
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 20
  55 temperature = 190
  56
  57 [filament:1.75mm PLA TinyBoy]
  58 bed_temperature = 0
  59 bridge_fan_speed = 100
  60 cooling = 1
  61 disable_fan_first_layers = 2
  62 extrusion_multiplier = 1
  63 fan_always_on = 1
  64 fan_below_layer_time = 60
  65 filament_colour = #FF8000
  66 filament_diameter = 1.75
  67 first_layer_bed_temperature = 0
  68 first_layer_temperature = 200
  69 max_fan_speed = 40
  70 min_fan_speed = 35
  71 min_print_speed = 5
  72 slowdown_below_layer_time = 10
  73 temperature = 200
  74
  75 [filament:2.70mm PLA]
  76 bed_temperature = 60
  77 bridge_fan_speed = 100
  78 cooling = 1
  79 disable_fan_first_layers = 3
  80 extrusion_multiplier = 1
  81 fan_always_on = 1
  82 fan_below_layer_time = 60
  83 filament_colour = #FF00FF
  84 filament_diameter = 2.72
  85 first_layer_bed_temperature = 60
  86 first_layer_temperature = 220
  87 max_fan_speed = 100
  88 min_fan_speed = 100
  89 min_print_speed = 5
  90 slowdown_below_layer_time = 20
  91 temperature = 200
  92
  93 [filament:2.80mm PETG ]
  94 bed_temperature = 75
  95 bridge_fan_speed = 100
  96 cooling = 1
  97 disable_fan_first_layers = 3
  98 extrusion_multiplier = 1
  99 fan_always_on = 1
 100 fan_below_layer_time = 60
 101 filament_colour = #B1EB96
 102 filament_diameter = 2.8
 103 first_layer_bed_temperature = 75
 104 first_layer_temperature = 245
 105 max_fan_speed = 100
 106 min_fan_speed = 100
 107 min_print_speed = 5
 108 slowdown_below_layer_time = 10
 109 temperature = 235
 110
 111 [filament:2.85mm ABS]
 112 bed_temperature = 100
 113 bridge_fan_speed = 35
 114 cooling = 1
 115 disable_fan_first_layers = 1
 116 extrusion_multiplier = 1
 117 fan_always_on = 0
 118 fan_below_layer_time = 60
 119 filament_colour = #FFFFFF
 120 filament_diameter = 2.85
 121 first_layer_bed_temperature = 100
 122 first_layer_temperature = 250
 123 max_fan_speed = 0
 124 min_fan_speed = 0
 125 min_print_speed = 5
 126 slowdown_below_layer_time = 10
 127 temperature = 235
 128
 129 [filament:2.85mm PETG ]
 130 bed_temperature = 75
 131 bridge_fan_speed = 100
 132 cooling = 1
 133 disable_fan_first_layers = 3
 134 extrusion_multiplier = 1
 135 fan_always_on = 1
 136 fan_below_layer_time = 60
 137 filament_colour = #B1EB96
 138 filament_diameter = 2.85
 139 first_layer_bed_temperature = 75
 140 first_layer_temperature = 245
 141 max_fan_speed = 100
 142 min_fan_speed = 100
 143 min_print_speed = 5
 144 slowdown_below_layer_time = 10
 145 temperature = 235
 146
 147 [filament:2.85mm PLA]
 148 bed_temperature = 60
 149 bridge_fan_speed = 100
 150 cooling = 1
 151 disable_fan_first_layers = 3
 152 extrusion_multiplier = 1
 153 fan_always_on = 1
 154 fan_below_layer_time = 60
 155 filament_colour = #FF00FF
 156 filament_diameter = 2.85
 157 first_layer_bed_temperature = 60
 158 first_layer_temperature = 220
 159 max_fan_speed = 100
 160 min_fan_speed = 100
 161 min_print_speed = 5
 162 slowdown_below_layer_time = 20
 163 temperature = 195
 164
 165 [filament:2.85mm PLA hot]
 166 bed_temperature = 60
 167 bridge_fan_speed = 100
 168 cooling = 1
 169 disable_fan_first_layers = 1
 170 extrusion_multiplier = 1
 171 fan_always_on = 1
 172 fan_below_layer_time = 60
 173 filament_colour = #FF00FF
 174 filament_diameter = 2.85
 175 first_layer_bed_temperature = 60
 176 first_layer_temperature = 215
 177 max_fan_speed = 100
 178 min_fan_speed = 100
 179 min_print_speed = 5
 180 slowdown_below_layer_time = 10
 181 temperature = 215
 182
 183 [filament:2.85mm Willowflex]
 184 bed_temperature = 70
 185 bridge_fan_speed = 100
 186 cooling = 1
 187 disable_fan_first_layers = 1
 188 extrusion_multiplier = 1
 189 fan_always_on = 1
 190 fan_below_layer_time = 60
 191 filament_colour = #BF0005
 192 filament_diameter = 2.85
 193 first_layer_bed_temperature = 70
 194 first_layer_temperature = 160
 195 max_fan_speed = 100
 196 min_fan_speed = 50
 197 min_print_speed = 5
 198 slowdown_below_layer_time = 20
 199 temperature = 160
 200
 201 [presets]
 202 filament = 2.80mm PETG .ini
 203 print = Lulzbot.ini
 204 printer = MendelPro.ini
 205
 206 [print:Lulzbot]
 207 avoid_crossing_perimeters = 0
 208 bottom_solid_layers = 4
 209 bridge_acceleration = 0
 210 bridge_flow_ratio = 1
 211 bridge_speed = 60
 212 brim_width = 2
 213 complete_objects = 0
 214 default_acceleration = 0
 215 dont_support_bridges = 1
 216 external_fill_pattern = rectilinear
 217 external_perimeter_extrusion_width = 0
 218 external_perimeter_speed = 30
 219 external_perimeters_first = 0
 220 extra_perimeters = 1
 221 extruder_clearance_height = 20
 222 extruder_clearance_radius = 20
 223 extrusion_width = 0
 224 fill_angle = 45
 225 fill_density = 20%
 226 fill_pattern = rectilinear
 227 first_layer_acceleration = 0
 228 first_layer_extrusion_width = 0
 229 first_layer_height = 0.2
 230 first_layer_speed = 20
 231 gap_fill_speed = 20
 232 gcode_comments = 0
 233 infill_acceleration = 0
 234 infill_every_layers = 1
 235 infill_extruder = 1
 236 infill_extrusion_width = 1.1
 237 infill_first = 0
 238 infill_only_where_needed = 0
 239 infill_overlap = 15%
 240 infill_speed = 60
 241 interface_shells = 0
 242 layer_height = 0.2
 243 max_print_speed = 130
 244 max_volumetric_speed = 0
 245 min_skirt_length = 1
 246 notes =
 247 only_retract_when_crossing_perimeters = 1
 248 ooze_prevention = 0
 249 output_filename_format = [input_filename_base].gcode
 250 overhangs = 1
 251 perimeter_acceleration = 0
 252 perimeter_extruder = 1
 253 perimeter_extrusion_width = 0
 254 perimeter_speed = 60
 255 perimeters = 3
 256 post_process =
 257 raft_layers = 0
 258 resolution = 0
 259 seam_position = aligned
 260 skirt_distance = 6
 261 skirt_height = 1
 262 skirts = 1
 263 small_perimeter_speed = 15
 264 solid_infill_below_area = 70
 265 solid_infill_every_layers = 0
 266 solid_infill_extruder = 1
 267 solid_infill_extrusion_width = 0
 268 solid_infill_speed = 10
 269 spiral_vase = 0
 270 standby_temperature_delta = -5
 271 support_material = 1
 272 support_material_angle = 0
 273 support_material_contact_distance = 0.4
 274 support_material_enforce_layers = 0
 275 support_material_extruder = 1
 276 support_material_extrusion_width = 0
 277 support_material_interface_extruder = 1
 278 support_material_interface_layers = 3
 279 support_material_interface_spacing = 0
 280 support_material_interface_speed = 30
 281 support_material_pattern = rectilinear-grid
 282 support_material_spacing = 2
 283 support_material_speed = 60
 284 support_material_threshold = 0
 285 thin_walls = 0
 286 threads = 2
 287 top_infill_extrusion_width = 0
 288 top_solid_infill_speed = 5
 289 top_solid_layers = 5
 290 travel_speed = 130
 291 xy_size_compensation = 0
 292
 293 [print:MendelPro]
 294 avoid_crossing_perimeters = 1
 295 bottom_solid_layers = 5
 296 bridge_acceleration = 0
 297 bridge_flow_ratio = 1
 298 bridge_speed = 40
 299 brim_width = 2
 300 complete_objects = 0
 301 default_acceleration = 0
 302 dont_support_bridges = 1
 303 external_fill_pattern = rectilinear
 304 external_perimeter_extrusion_width = 0
 305 external_perimeter_speed = 30
 306 external_perimeters_first = 0
 307 extra_perimeters = 1
 308 extruder_clearance_height = 20
 309 extruder_clearance_radius = 20
 310 extrusion_width = 0
 311 fill_angle = 45
 312 fill_density = 20%
 313 fill_pattern = rectilinear
 314 first_layer_acceleration = 0
 315 first_layer_extrusion_width = 0
 316 first_layer_height = 0.2
 317 first_layer_speed = 30
 318 gap_fill_speed = 20
 319 gcode_comments = 0
 320 infill_acceleration = 0
 321 infill_every_layers = 1
 322 infill_extruder = 1
 323 infill_extrusion_width = 0
 324 infill_first = 0
 325 infill_only_where_needed = 0
 326 infill_overlap = 25%
 327 infill_speed = 50
 328 interface_shells = 0
 329 layer_height = 0.2
 330 max_print_speed = 80
 331 max_volumetric_speed = 0
 332 min_skirt_length = 6
 333 notes =
 334 only_retract_when_crossing_perimeters = 1
 335 ooze_prevention = 0
 336 output_filename_format = [input_filename_base].gcode
 337 overhangs = 1
 338 perimeter_acceleration = 0
 339 perimeter_extruder = 1
 340 perimeter_extrusion_width = 0
 341 perimeter_speed = 50
 342 perimeters = 3
 343 post_process =
 344 raft_layers = 0
 345 resolution = 0
 346 seam_position = nearest
 347 skirt_distance = 6
 348 skirt_height = 1
 349 skirts = 1
 350 small_perimeter_speed = 20
 351 solid_infill_below_area = 70
 352 solid_infill_every_layers = 0
 353 solid_infill_extruder = 1
 354 solid_infill_extrusion_width = 0
 355 solid_infill_speed = 40
 356 spiral_vase = 0
 357 standby_temperature_delta = -5
 358 support_material = 1
 359 support_material_angle = 0
 360 support_material_contact_distance = 0.4
 361 support_material_enforce_layers = 0
 362 support_material_extruder = 1
 363 support_material_extrusion_width = 0
 364 support_material_interface_extruder = 1
 365 support_material_interface_layers = 3
 366 support_material_interface_spacing = 0
 367 support_material_interface_speed = 40
 368 support_material_pattern = rectilinear
 369 support_material_spacing = 3
 370 support_material_speed = 50
 371 support_material_threshold = 0
 372 thin_walls = 1
 373 threads = 2
 374 top_infill_extrusion_width = 0
 375 top_solid_infill_speed = 40
 376 top_solid_layers = 5
 377 travel_speed = 100
 378 xy_size_compensation = 0
 379
 380 [print:TinyBoy]
 381 avoid_crossing_perimeters = 0
 382 bottom_solid_layers = 3
 383 bridge_acceleration = 0
 384 bridge_flow_ratio = 1
 385 bridge_speed = 40
 386 brim_width = 0
 387 complete_objects = 0
 388 default_acceleration = 0
 389 dont_support_bridges = 1
 390 external_fill_pattern = rectilinear
 391 external_perimeter_extrusion_width = 0
 392 external_perimeter_speed = 20
 393 external_perimeters_first = 0
 394 extra_perimeters = 1
 395 extruder_clearance_height = 20
 396 extruder_clearance_radius = 20
 397 extrusion_width = 0
 398 fill_angle = 45
 399 fill_density = 20%
 400 fill_pattern = 3dhoneycomb
 401 first_layer_acceleration = 0
 402 first_layer_extrusion_width = 0
 403 first_layer_height = 0.2
 404 first_layer_speed = 10
 405 gap_fill_speed = 20
 406 gcode_comments = 0
 407 infill_acceleration = 0
 408 infill_every_layers = 1
 409 infill_extruder = 1
 410 infill_extrusion_width = 0
 411 infill_first = 0
 412 infill_only_where_needed = 0
 413 infill_overlap = 15%
 414 infill_speed = 0
 415 interface_shells = 0
 416 layer_height = 0.2
 417 max_print_speed = 80
 418 max_volumetric_speed = 0
 419 min_skirt_length = 1
 420 notes =
 421 only_retract_when_crossing_perimeters = 1
 422 ooze_prevention = 0
 423 output_filename_format = [input_filename_base].gcode
 424 overhangs = 1
 425 perimeter_acceleration = 0
 426 perimeter_extruder = 1
 427 perimeter_extrusion_width = 0
 428 perimeter_speed = 0
 429 perimeters = 2
 430 post_process =
 431 raft_layers = 0
 432 resolution = 0
 433 seam_position = nearest
 434 skirt_distance = 1
 435 skirt_height = 1
 436 skirts = 1
 437 small_perimeter_speed = 0
 438 solid_infill_below_area = 70
 439 solid_infill_every_layers = 0
 440 solid_infill_extruder = 1
 441 solid_infill_extrusion_width = 0
 442 solid_infill_speed = 0
 443 spiral_vase = 0
 444 standby_temperature_delta = -5
 445 support_material = 0
 446 support_material_angle = 0
 447 support_material_contact_distance = 0.2
 448 support_material_enforce_layers = 0
 449 support_material_extruder = 1
 450 support_material_extrusion_width = 0
 451 support_material_interface_extruder = 1
 452 support_material_interface_layers = 2
 453 support_material_interface_spacing = 0
 454 support_material_interface_speed = 100%
 455 support_material_pattern = rectilinear
 456 support_material_spacing = 5
 457 support_material_speed = 0
 458 support_material_threshold = 40
 459 thin_walls = 1
 460 threads = 2
 461 top_infill_extrusion_width = 0
 462 top_solid_infill_speed = 20
 463 top_solid_layers = 4
 464 travel_speed = 100
 465 xy_size_compensation = 0
 466
 467 [print:Toy]
 468 avoid_crossing_perimeters = 0
 469 bottom_solid_layers = 2
 470 bridge_acceleration = 0
 471 bridge_flow_ratio = 1
 472 bridge_speed = 0
 473 brim_width = 0
 474 complete_objects = 0
 475 default_acceleration = 0
 476 dont_support_bridges = 1
 477 external_fill_pattern = rectilinear
 478 external_perimeter_extrusion_width = 0
 479 external_perimeter_speed = 0
 480 external_perimeters_first = 0
 481 extra_perimeters = 1
 482 extruder_clearance_height = 20
 483 extruder_clearance_radius = 20
 484 extrusion_width = 0
 485 fill_angle = 45
 486 fill_density = 0%
 487 fill_pattern = rectilinear
 488 first_layer_acceleration = 0
 489 first_layer_extrusion_width = 0
 490 first_layer_height = 0.2
 491 first_layer_speed = 10
 492 gap_fill_speed = 0
 493 gcode_comments = 0
 494 infill_acceleration = 0
 495 infill_every_layers = 1
 496 infill_extruder = 1
 497 infill_extrusion_width = 0
 498 infill_first = 0
 499 infill_only_where_needed = 0
 500 infill_overlap = 15%
 501 infill_speed = 0
 502 interface_shells = 0
 503 layer_height = 0.2
 504 max_print_speed = 10
 505 max_volumetric_speed = 0
 506 min_skirt_length = 1
 507 notes =
 508 only_retract_when_crossing_perimeters = 1
 509 ooze_prevention = 0
 510 output_filename_format = [input_filename_base].gcode
 511 overhangs = 1
 512 perimeter_acceleration = 0
 513 perimeter_extruder = 1
 514 perimeter_extrusion_width = 0
 515 perimeter_speed = 0
 516 perimeters = 2
 517 post_process =
 518 raft_layers = 0
 519 resolution = 0
 520 seam_position = aligned
 521 skirt_distance = 1
 522 skirt_height = 1
 523 skirts = 1
 524 small_perimeter_speed = 0
 525 solid_infill_below_area = 70
 526 solid_infill_every_layers = 0
 527 solid_infill_extruder = 1
 528 solid_infill_extrusion_width = 0
 529 solid_infill_speed = 0
 530 spiral_vase = 0
 531 standby_temperature_delta = -5
 532 support_material = 1
 533 support_material_angle = 0
 534 support_material_contact_distance = 0.3
 535 support_material_enforce_layers = 0
 536 support_material_extruder = 1
 537 support_material_extrusion_width = 0
 538 support_material_interface_extruder = 1
 539 support_material_interface_layers = 3
 540 support_material_interface_spacing = 0
 541 support_material_interface_speed = 100%
 542 support_material_pattern = rectilinear
 543 support_material_spacing = 5
 544 support_material_speed = 0
 545 support_material_threshold = 40
 546 thin_walls = 1
 547 threads = 2
 548 top_infill_extrusion_width = 0
 549 top_solid_infill_speed = 0
 550 top_solid_layers = 0
 551 travel_speed = 100
 552 xy_size_compensation = 0
 553
 554 [print:prusa i3]
 555 avoid_crossing_perimeters = 0
 556 bottom_solid_layers = 4
 557 bridge_acceleration = 0
 558 bridge_flow_ratio = 1
 559 bridge_speed = 40
 560 brim_width = 0
 561 complete_objects = 0
 562 default_acceleration = 0
 563 dont_support_bridges = 1
 564 external_fill_pattern = rectilinear
 565 external_perimeter_extrusion_width = 0
 566 external_perimeter_speed = 30
 567 external_perimeters_first = 0
 568 extra_perimeters = 1
 569 extruder_clearance_height = 20
 570 extruder_clearance_radius = 20
 571 extrusion_width = 0
 572 fill_angle = 45
 573 fill_density = 20%
 574 fill_pattern = honeycomb
 575 first_layer_acceleration = 0
 576 first_layer_extrusion_width = 0
 577 first_layer_height = 0.3
 578 first_layer_speed = 10
 579 gap_fill_speed = 20
 580 gcode_comments = 0
 581 infill_acceleration = 0
 582 infill_every_layers = 1
 583 infill_extruder = 1
 584 infill_extrusion_width = 0
 585 infill_first = 0
 586 infill_only_where_needed = 0
 587 infill_overlap = 15%
 588 infill_speed = 80
 589 interface_shells = 0
 590 layer_height = 0.15
 591 max_print_speed = 100
 592 max_volumetric_speed = 0
 593 min_skirt_length = 3
 594 notes =
 595 only_retract_when_crossing_perimeters = 1
 596 ooze_prevention = 0
 597 output_filename_format = [input_filename_base].gcode
 598 overhangs = 1
 599 perimeter_acceleration = 0
 600 perimeter_extruder = 1
 601 perimeter_extrusion_width = 0
 602 perimeter_speed = 60
 603 perimeters = 3
 604 post_process =
 605 raft_layers = 0
 606 resolution = 0
 607 seam_position = nearest
 608 skirt_distance = 6
 609 skirt_height = 1
 610 skirts = 1
 611 small_perimeter_speed = 15
 612 solid_infill_below_area = 70
 613 solid_infill_every_layers = 0
 614 solid_infill_extruder = 1
 615 solid_infill_extrusion_width = 0
 616 solid_infill_speed = 40
 617 spiral_vase = 0
 618 standby_temperature_delta = -5
 619 support_material = 1
 620 support_material_angle = 0
 621 support_material_contact_distance = 0.3
 622 support_material_enforce_layers = 0
 623 support_material_extruder = 1
 624 support_material_extrusion_width = 0
 625 support_material_interface_extruder = 1
 626 support_material_interface_layers = 3
 627 support_material_interface_spacing = 0
 628 support_material_interface_speed = 40
 629 support_material_pattern = rectilinear
 630 support_material_spacing = 3
 631 support_material_speed = 40
 632 support_material_threshold = 0
 633 thin_walls = 1
 634 threads = 2
 635 top_infill_extrusion_width = 0
 636 top_solid_infill_speed = 30
 637 top_solid_layers = 4
 638 travel_speed = 100
 639 xy_size_compensation = 0
 640
 641 [print:prusa i3 test]
 642 avoid_crossing_perimeters = 0
 643 bottom_solid_layers = 4
 644 bridge_acceleration = 0
 645 bridge_flow_ratio = 1
 646 bridge_speed = 40
 647 brim_width = 5
 648 complete_objects = 0
 649 default_acceleration = 0
 650 dont_support_bridges = 1
 651 external_fill_pattern = rectilinear
 652 external_perimeter_extrusion_width = 0
 653 external_perimeter_speed = 30
 654 external_perimeters_first = 0
 655 extra_perimeters = 1
 656 extruder_clearance_height = 20
 657 extruder_clearance_radius = 20
 658 extrusion_width = 0
 659 fill_angle = 45
 660 fill_density = 20%
 661 fill_pattern = honeycomb
 662 first_layer_acceleration = 0
 663 first_layer_extrusion_width = 0
 664 first_layer_height = 0.2
 665 first_layer_speed = 10
 666 gap_fill_speed = 20
 667 gcode_comments = 0
 668 infill_acceleration = 0
 669 infill_every_layers = 1
 670 infill_extruder = 1
 671 infill_extrusion_width = 0
 672 infill_first = 0
 673 infill_only_where_needed = 0
 674 infill_overlap = 15%
 675 infill_speed = 80
 676 interface_shells = 0
 677 layer_height = 0.2
 678 max_print_speed = 100
 679 max_volumetric_speed = 0
 680 min_skirt_length = 3
 681 notes =
 682 only_retract_when_crossing_perimeters = 1
 683 ooze_prevention = 0
 684 output_filename_format = [input_filename_base].gcode
 685 overhangs = 1
 686 perimeter_acceleration = 0
 687 perimeter_extruder = 1
 688 perimeter_extrusion_width = 0
 689 perimeter_speed = 60
 690 perimeters = 3
 691 post_process =
 692 raft_layers = 0
 693 resolution = 0
 694 seam_position = nearest
 695 skirt_distance = 6
 696 skirt_height = 1
 697 skirts = 1
 698 small_perimeter_speed = 15
 699 solid_infill_below_area = 70
 700 solid_infill_every_layers = 0
 701 solid_infill_extruder = 1
 702 solid_infill_extrusion_width = 0
 703 solid_infill_speed = 40
 704 spiral_vase = 0
 705 standby_temperature_delta = -5
 706 support_material = 1
 707 support_material_angle = 0
 708 support_material_contact_distance = 0
 709 support_material_enforce_layers = 0
 710 support_material_extruder = 1
 711 support_material_extrusion_width = 0
 712 support_material_interface_extruder = 1
 713 support_material_interface_layers = 3
 714 support_material_interface_spacing = 0
 715 support_material_interface_speed = 40
 716 support_material_pattern = pillars
 717 support_material_spacing = 3
 718 support_material_speed = 40
 719 support_material_threshold = 0
 720 thin_walls = 1
 721 threads = 2
 722 top_infill_extrusion_width = 0
 723 top_solid_infill_speed = 30
 724 top_solid_layers = 4
 725 travel_speed = 100
 726 xy_size_compensation = 0
 727
 728 [printer:Lulzbot]
 729 bed_shape = 0x0,298x0,298x275,0x275
 730 before_layer_gcode =
 731 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n
 732 extruder_offset = 0x0
 733 gcode_flavor = reprap
 734 layer_gcode =
 735 nozzle_diameter = 0.35
 736 octoprint_apikey =
 737 octoprint_host =
 738 pressure_advance = 0
 739 retract_before_travel = 2
 740 retract_layer_change = 1
 741 retract_length = 3
 742 retract_length_toolchange = 3
 743 retract_lift = 0
 744 retract_restart_extra = 0
 745 retract_restart_extra_toolchange = 0
 746 retract_speed = 40
 747 start_gcode = G28 ; home all axes\n
 748 toolchange_gcode =
 749 use_firmware_retraction = 0
 750 use_relative_e_distances = 0
 751 use_volumetric_e = 0
 752 vibration_limit = 0
 753 wipe = 0
 754 z_offset = 0
 755
 756 [printer:MendelPro]
 757 bed_shape = 0x0,220x0,220x177,0x177
 758 before_layer_gcode =
 759 end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n
 760 extruder_offset = 0x0
 761 gcode_flavor = reprap
 762 layer_gcode =
 763 nozzle_diameter = 0.5
 764 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 765 octoprint_host =
 766 pressure_advance = 0
 767 retract_before_travel = 2
 768 retract_layer_change = 1
 769 retract_length = 5
 770 retract_length_toolchange = 10
 771 retract_lift = 0
 772 retract_restart_extra = 0
 773 retract_restart_extra_toolchange = 0
 774 retract_speed = 40
 775 start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\nG0   Y40        ; clab move\n
 776 toolchange_gcode =
 777 use_firmware_retraction = 0
 778 use_relative_e_distances = 0
 779 use_volumetric_e = 0
 780 vibration_limit = 0
 781 wipe = 0
 782 z_offset = 0
 783
 784 [printer:TinyBoy]
 785 bed_shape = 0x0,88x0,88x74,0x74
 786 before_layer_gcode =
 787 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nM84               ; disable motors\n
 788 extruder_offset = 0x0
 789 gcode_flavor = reprap
 790 layer_gcode =
 791 nozzle_diameter = 0.4
 792 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 793 octoprint_host =
 794 pressure_advance = 0
 795 retract_before_travel = 2
 796 retract_layer_change = 1
 797 retract_length = 5
 798 retract_length_toolchange = 10
 799 retract_lift = 0
 800 retract_restart_extra = 0
 801 retract_restart_extra_toolchange = 0
 802 retract_speed = 40
 803 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 804 toolchange_gcode =
 805 use_firmware_retraction = 0
 806 use_relative_e_distances = 0
 807 use_volumetric_e = 0
 808 vibration_limit = 0
 809 wipe = 0
 810 z_offset = 0
 811
 812 [printer:Toyrep]
 813 bed_shape = 0x0,125x0,125x125,0x125
 814 before_layer_gcode =
 815 end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
 816 extruder_offset = 0x0
 817 gcode_flavor = reprap
 818 layer_gcode =
 819 nozzle_diameter = 0.4
 820 octoprint_apikey =
 821 octoprint_host =
 822 pressure_advance = 0
 823 retract_before_travel = 2
 824 retract_layer_change = 1
 825 retract_length = 0
 826 retract_length_toolchange = 3
 827 retract_lift = 0
 828 retract_restart_extra = 0
 829 retract_restart_extra_toolchange = 0
 830 retract_speed = 10
 831 start_gcode = \n
 832 toolchange_gcode =
 833 use_firmware_retraction = 0
 834 use_relative_e_distances = 0
 835 use_volumetric_e = 0
 836 vibration_limit = 0
 837 wipe = 0
 838 z_offset = 0
 839
 840 [printer:prusa i3]
 841 bed_shape = 0x0,190x0,190x220,0x220
 842 before_layer_gcode =
 843 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n
 844 extruder_offset = 0x0
 845 gcode_flavor = reprap
 846 layer_gcode =
 847 nozzle_diameter = 0.4
 848 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 849 octoprint_host =
 850 pressure_advance = 0
 851 retract_before_travel = 2
 852 retract_layer_change = 0
 853 retract_length = 2
 854 retract_length_toolchange = 10
 855 retract_lift = 0
 856 retract_restart_extra = 0
 857 retract_restart_extra_toolchange = 0
 858 retract_speed = 40
 859 start_gcode = G28 Z             ; home Z\n;G0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0   Y40        ; clab move
 860 toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer
 861 use_firmware_retraction = 0
 862 use_relative_e_distances = 0
 863 use_volumetric_e = 0
 864 vibration_limit = 0
 865 wipe = 0
 866 z_offset = 0
 867
 868 [settings]
 869 autocenter = 1
 870 mode = expert