2 Termine ins Archiv verschoben
[stratum0-wiki.git] / RepRap%2FConfigs%2FSlic3r%2Fprinter.ini.mw
1 # generated by Slic3r 1.2.9 on Thu Jan 28 20:04:50 2016
2 bed_shape = 0x0,200x0,200x177,0x177
3 before_layer_gcode =
4 end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; Bed off\nG28 X0 ; home X axis\nG0 Y177 ; moving Bed out\nM84 ; disable motors\n
5 extruder_offset = 0x0
6 gcode_flavor = reprap
7 layer_gcode =
8 nozzle_diameter = 0.5
9 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
10 octoprint_host = rapsberry:5000
11 pressure_advance = 0
12 retract_before_travel = 2
13 retract_layer_change = 1
14 retract_length = 5
15 retract_length_toolchange = 10
16 retract_lift = 0
17 retract_restart_extra = 0
18 retract_restart_extra_toolchange = 0
19 retract_speed = 40
20 start_gcode = G28 Z0 ; home Z\nG1 Z10 ; if bed is not level, don't scratch bed when homing XY\nG28 X0 Y0 ; home X Y\nG28 Z0
21 toolchange_gcode =
22 use_firmware_retraction = 0
23 use_relative_e_distances = 0
24 use_volumetric_e = 0
25 vibration_limit = 0
26 wipe = 0
27 z_offset = 0
This page took 0.040759 seconds and 5 git commands to generate.