RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fsolid.ini.mw

   1 avoid_crossing_perimeters = 0
   2 bottom_solid_layers = 3
   3 bridge_acceleration = 0
   4 bridge_flow_ratio = 1
   5 bridge_speed = 60
   6 brim_width = 3
   7 complete_objects = 0
   8 default_acceleration = 0
   9 external_perimeter_speed = 70%
  10 external_perimeters_first = 0
  11 extra_perimeters = 1
  12 extruder_clearance_height = 20
  13 extruder_clearance_radius = 20
  14 extrusion_width = 0
  15 fill_angle = 45
  16 fill_density = 0.3
  17 fill_pattern = honeycomb
  18 first_layer_acceleration = 0
  19 first_layer_extrusion_width = 200%
  20 first_layer_height = 0.22
  21 first_layer_speed = 30%
  22 gap_fill_speed = 20
  23 gcode_comments = 0
  24 infill_acceleration = 0
  25 infill_every_layers = 1
  26 infill_extruder = 1
  27 infill_extrusion_width = 0
  28 infill_first = 0
  29 infill_only_where_needed = 0
  30 infill_speed = 60
  31 layer_height = 0.22
  32 min_skirt_length = 0
  33 notes =
  34 only_retract_when_crossing_perimeters = 1
  35 ooze_prevention = 0
  36 output_filename_format = [input_filename_base].gcode
  37 overhangs = 1
  38 perimeter_acceleration = 0
  39 perimeter_extruder = 1
  40 perimeter_extrusion_width = 0
  41 perimeter_speed = 50
  42 perimeters = 3
  43 post_process =
  44 raft_layers = 0
  45 randomize_start = 0
  46 resolution = 0
  47 skirt_distance = 6
  48 skirt_height = 1
  49 skirts = 2
  50 small_perimeter_speed = 40
  51 solid_fill_pattern = concentric
  52 solid_infill_below_area = 70
  53 solid_infill_every_layers = 0
  54 solid_infill_extrusion_width = 0
  55 solid_infill_speed = 60
  56 spiral_vase = 0
  57 standby_temperature_delta = -5
  58 start_perimeters_at_concave_points = 0
  59 start_perimeters_at_non_overhang = 0
  60 support_material = 0
  61 support_material_angle = 0
  62 support_material_enforce_layers = 0
  63 support_material_extruder = 1
  64 support_material_extrusion_width = 0
  65 support_material_interface_extruder = 1
  66 support_material_interface_layers = 0
  67 support_material_interface_spacing = 0
  68 support_material_pattern = rectilinear
  69 support_material_spacing = 2.5
  70 support_material_speed = 60
  71 support_material_threshold = 0
  72 thin_walls = 1
  73 threads = 2
  74 top_infill_extrusion_width = 0
  75 top_solid_infill_speed = 50
  76 top_solid_layers = 5
  77 travel_speed = 130