RepRap%2FConfigs%2FSlic3r.mw

   1 Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck (Foto)
   2
   3 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
   4
   5 ===== Von larsan =====
   6 Ursprünglich die erste Konfiguration für unseren Drucker auf Basis von {{Benutzer|DanielWillmann}}s Konfiguration.
   7
   8 Von der unten stehenden Config gibt es eine verbesserte [https://rohieb.name/stuff/stratum0/larsan-tuned.ini larsan-tuned.ini], die Rohieb gemacht hat.
   9
  10 <pre style="height:200px;overflow:scroll;">
  11 # generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012
  12 acceleration = 0
  13 bed_size = 180,200
  14 bed_temperature = 50
  15 bottom_solid_layers = 3
  16 bridge_fan_speed = 100
  17 bridge_flow_ratio = 1
  18 bridge_speed = 60
  19 brim_width = 0
  20 complete_objects =
  21 cooling =
  22 disable_fan_first_layers = 1
  23 duplicate = 1
  24 duplicate_distance = 6
  25 duplicate_grid = 1,1
  26 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
  27 external_perimeter_speed = 40%
  28 extra_perimeters = 1
  29 extruder_clearance_height = 20
  30 extruder_clearance_radius = 30
  31 extruder_offset = 0x0
  32 extrusion_axis = E
  33 extrusion_multiplier = 1
  34 extrusion_width = 0
  35 fan_always_on = 0
  36 fan_below_layer_time = 60
  37 filament_diameter = 1.75
  38 fill_angle = 0
  39 fill_density = 0.15
  40 fill_pattern = honeycomb
  41 first_layer_bed_temperature = 50
  42 first_layer_extrusion_width = 0
  43 first_layer_height = 0.27
  44 first_layer_speed = 15%
  45 first_layer_temperature = 195
  46 g0 = 0
  47 gap_fill_speed = 20
  48 gcode_arcs = 0
  49 gcode_comments = 0
  50 gcode_flavor = reprap
  51 infill_acceleration = 50
  52 infill_every_layers = 1
  53 infill_extruder = 1
  54 infill_extrusion_width = 0
  55 infill_speed = 60
  56 layer_gcode =
  57 layer_height = 0.24
  58 max_fan_speed = 100
  59 min_fan_speed = 35
  60 min_print_speed = 5
  61 min_skirt_length = 0
  62 notes = larsanconfig
  63 nozzle_diameter = 0.35
  64 only_retract_when_crossing_perimeters =
  65 output_filename_format = [input_filename_base].gcode
  66 perimeter_acceleration = 25
  67 perimeter_extruder = 1
  68 perimeter_extrusion_width = 0
  69 perimeter_speed = 50
  70 perimeters = 3
  71 post_process =
  72 print_center = 90,100
  73 randomize_start = 1
  74 retract_before_travel = 5
  75 retract_length = 2
  76 retract_length_toolchange = 3
  77 retract_lift = 0
  78 retract_restart_extra = 0.01
  79 retract_restart_extra_toolchange = 0
  80 retract_speed = 50
  81 rotate = 0
  82 scale = 1
  83 skirt_distance = 20
  84 skirt_height = 1
  85 skirts = 3
  86 slowdown_below_layer_time = 50
  87 small_perimeter_speed = 100%
  88 solid_fill_pattern = rectilinear
  89 solid_infill_below_area = 0
  90 solid_infill_every_layers = 0
  91 solid_infill_speed = 90%
  92 start_gcode = G28 ; home all axes\nM92 E820
  93 support_material =
  94 support_material_angle = 45
  95 support_material_extruder = 1
  96 support_material_extrusion_width = 0
  97 support_material_pattern = rectilinear
  98 support_material_spacing = 2
  99 support_material_speed = 60
 100 support_material_threshold = 41
 101 temperature = 185
 102 threads = 2
 103 top_solid_infill_speed = 70%
 104 top_solid_layers = 3
 105 travel_speed = 50
 106 use_relative_e_distances = 0
 107 vibration_limit = 0
 108 z_offset = 0
 109 </pre>
 110
 111 == Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ==
 112 Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
 113 <pre style="height:200px;overflow:scroll;">
 114 # generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
 115 acceleration = 0
 116 bed_size = 180,200
 117 bed_temperature = 60
 118 bridge_fan_speed = 100
 119 bridge_flow_ratio = 1
 120 bridge_speed = 350
 121 brim_width = 0
 122 complete_objects = 0
 123 cooling = 1
 124 disable_fan_first_layers = 1
 125 duplicate = 1
 126 duplicate_distance = 6
 127 duplicate_grid = 1,1
 128 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 129 external_perimeter_speed = 90%
 130 extra_perimeters = 1
 131 extruder_clearance_height = 20
 132 extruder_clearance_radius = 20
 133 extruder_offset = 0x0
 134 extrusion_axis = E
 135 extrusion_multiplier = 1.0
 136 extrusion_width = 0
 137 fan_always_on = 0
 138 fan_below_layer_time = 60
 139 filament_diameter = 1.75
 140 fill_angle = 0
 141 fill_density = 0.2
 142 fill_pattern = rectilinear
 143 first_layer_bed_temperature = 60
 144 first_layer_extrusion_width = 0
 145 first_layer_height = 100%
 146 first_layer_speed = 20%
 147 first_layer_temperature = 195
 148 g0 = 0
 149 gcode_arcs = 0
 150 gcode_comments = 0
 151 gcode_flavor = reprap
 152 infill_acceleration = 50
 153 infill_every_layers = 1
 154 infill_extruder = 1
 155 infill_extrusion_width = 0
 156 infill_speed = 120
 157 layer_gcode =
 158 layer_height = 0.25
 159 max_fan_speed = 100
 160 min_fan_speed = 35
 161 min_print_speed = 10
 162 notes = Used for Mate name tag
 163 nozzle_diameter = 0.35
 164 only_retract_when_crossing_perimeters = 0
 165 output_filename_format = [input_filename_base].gcode
 166 perimeter_acceleration = 25
 167 perimeter_extruder = 1
 168 perimeter_extrusion_width = 0
 169 perimeter_speed = 100
 170 perimeters = 2
 171 post_process =
 172 print_center = 90,100
 173 randomize_start = 1
 174 retract_before_travel = 4
 175 retract_length = 4
 176 retract_length_toolchange = 3
 177 retract_lift = 0.5
 178 retract_restart_extra = 0
 179 retract_restart_extra_toolchange = 0
 180 retract_speed = 150
 181 rotate = 0
 182 scale = 1
 183 skirt_distance = 10
 184 skirt_height = 1
 185 skirts = 2
 186 slowdown_below_layer_time = 60
 187 small_perimeter_speed = 80%
 188 solid_fill_pattern = rectilinear
 189 solid_infill_below_area = 0
 190 solid_infill_every_layers = 0
 191 solid_infill_speed = 100%
 192 solid_layers = 3
 193 start_gcode = G28 ; home all axes\nM92 E820
 194 support_material = 1
 195 support_material_angle = 45
 196 support_material_extruder = 1
 197 support_material_extrusion_width = 0
 198 support_material_pattern = rectilinear
 199 support_material_spacing = 3
 200 support_material_threshold = 45
 201 temperature = 185
 202 threads = 3
 203 top_solid_infill_speed = 50%
 204 travel_speed = 140
 205 use_relative_e_distances = 0
 206 z_offset = 0.22
 207 </pre>
 208
 209 == Für Mate-Tags ==
 210 Konfiguration für Mate-Tags
 211 <pre style="height:200px;overflow:scroll;">
 212 # generated by Slic3r 0.9.9-dev on Fri Jun  7 23:59:05 2013
 213 avoid_crossing_perimeters = 1
 214 bed_size = 180,200
 215 bed_temperature = 50
 216 bottom_solid_layers = 3
 217 bridge_acceleration = 0
 218 bridge_fan_speed = 100
 219 bridge_flow_ratio = 1
 220 bridge_speed = 50
 221 brim_width = 0
 222 complete_objects = 1
 223 cooling =
 224 default_acceleration = 0
 225 disable_fan_first_layers = 1
 226 duplicate = 1
 227 duplicate_distance = 6
 228 duplicate_grid = 1,1
 229 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 230 external_perimeter_speed = 50%
 231 external_perimeters_first = 0
 232 extra_perimeters =
 233 extruder_clearance_height = 36
 234 extruder_clearance_radius = 40
 235 extruder_offset = 0x0
 236 extrusion_axis = E
 237 extrusion_multiplier = 1.1
 238 extrusion_width = 0
 239 fan_always_on = 0
 240 fan_below_layer_time = 60
 241 filament_diameter = 1.75
 242 fill_angle = 30
 243 fill_density = 0.3
 244 fill_pattern = rectilinear
 245 first_layer_bed_temperature = 50
 246 first_layer_extrusion_width = 0
 247 first_layer_height = 0.27
 248 first_layer_speed = 40%
 249 first_layer_temperature = 197
 250 g0 = 0
 251 gap_fill_speed = 20
 252 gcode_arcs = 0
 253 gcode_comments = 0
 254 gcode_flavor = reprap
 255 infill_acceleration = 0
 256 infill_every_layers = 1
 257 infill_extruder = 1
 258 infill_extrusion_width = 0
 259 infill_first = 0
 260 infill_only_where_needed = 0
 261 infill_speed = 70
 262 layer_gcode =
 263 layer_height = 0.24
 264 max_fan_speed = 100
 265 min_fan_speed = 35
 266 min_print_speed = 5
 267 min_skirt_length = 10
 268 notes = Config used for bottle name tags (http://www.thingiverse.com/thing:38861)
 269 nozzle_diameter = 0.33
 270 only_retract_when_crossing_perimeters = 1
 271 output_filename_format = [input_filename_base].gcode
 272 perimeter_acceleration = 0
 273 perimeter_extruder = 1
 274 perimeter_extrusion_width = 0
 275 perimeter_speed = 50
 276 perimeters = 2
 277 post_process =
 278 print_center = 90,100
 279 raft_layers = 0
 280 randomize_start =
 281 resolution = 0
 282 retract_before_travel = 0
 283 retract_layer_change = 1
 284 retract_length = 2
 285 retract_length_toolchange = 5
 286 retract_lift = 0
 287 retract_restart_extra = 0
 288 retract_restart_extra_toolchange = 0
 289 retract_speed = 50
 290 rotate = 0
 291 scale = 1
 292 skirt_distance = 5
 293 skirt_height = 1
 294 skirts = 2
 295 slowdown_below_layer_time = 50
 296 small_perimeter_speed = 60%
 297 solid_fill_pattern = rectilinear
 298 solid_infill_below_area = 0
 299 solid_infill_every_layers = 0
 300 solid_infill_extrusion_width = 0
 301 solid_infill_speed = 100%
 302 start_gcode = G28 ; home all axes\nM92 E820
 303 support_material =
 304 support_material_angle = 45
 305 support_material_enforce_layers = 0
 306 support_material_extruder = 1
 307 support_material_extrusion_width = 0
 308 support_material_interface_layers = 0
 309 support_material_interface_spacing = 0
 310 support_material_pattern = rectilinear
 311 support_material_spacing = 2
 312 support_material_speed = 70
 313 support_material_threshold = 41
 314 temperature = 188
 315 threads = 2
 316 toolchange_gcode =
 317 top_infill_extrusion_width = 0
 318 top_solid_infill_speed = 70%
 319 top_solid_layers = 3
 320 travel_speed = 50
 321 use_relative_e_distances = 0
 322 vibration_limit = 0
 323 z_offset = 0
 324 </pre>
 325
 326 == von Chrissi^ ==
 327 * Nette Konfiguration zum Drucken von allem möglichen.
 328 * First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
 329 * First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
 330 <pre  style="height:200px;overflow:scroll;">
 331 # generated by Slic3r 0.9.3 on Tue Nov  6 21:53:43 2012
 332 acceleration = 0
 333 bed_size = 180,200
 334 bed_temperature = 60
 335 bridge_fan_speed = 100
 336 bridge_flow_ratio = 1.05
 337 bridge_speed = 60
 338 brim_width = 0
 339 complete_objects =
 340 cooling = 1
 341 disable_fan_first_layers = 1
 342 duplicate = 1
 343 duplicate_distance = 6
 344 duplicate_grid = 1,1
 345 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 346 external_perimeter_speed = 100%
 347 extra_perimeters = 1
 348 extruder_clearance_height = 20
 349 extruder_clearance_radius = 30
 350 extruder_offset = 0x0
 351 extrusion_axis = E
 352 extrusion_multiplier = 1
 353 extrusion_width = 100%
 354 fan_always_on = 0
 355 fan_below_layer_time = 60
 356 filament_diameter = 1.75
 357 fill_angle = 45
 358 fill_density = 0.1
 359 fill_pattern = rectilinear
 360 first_layer_bed_temperature = 60
 361 first_layer_extrusion_width = 112%
 362 first_layer_height = 95%
 363 first_layer_speed = 15%
 364 first_layer_temperature = 200
 365 g0 = 0
 366 gcode_arcs = 0
 367 gcode_comments = 0
 368 gcode_flavor = reprap
 369 infill_acceleration = 50
 370 infill_every_layers = 1
 371 infill_extruder = 1
 372 infill_extrusion_width = 120%
 373 infill_speed = 60
 374 layer_gcode =
 375 layer_height = 0.3
 376 max_fan_speed = 100
 377 min_fan_speed = 35
 378 min_print_speed = 5
 379 notes = larsanconfig
 380 nozzle_diameter = 0.35
 381 only_retract_when_crossing_perimeters = 1
 382 output_filename_format = [timestamp]_[input_filename_base].gcode
 383 perimeter_acceleration = 25
 384 perimeter_extruder = 1
 385 perimeter_extrusion_width = 0
 386 perimeter_speed = 60
 387 perimeters = 2
 388 post_process =
 389 print_center = 120,120
 390 randomize_start = 1
 391 retract_before_travel = 4
 392 retract_length = 2
 393 retract_length_toolchange = 3
 394 retract_lift = 0
 395 retract_restart_extra = 0
 396 retract_restart_extra_toolchange = 0
 397 retract_speed = 50
 398 rotate = 0
 399 scale = 1
 400 skirt_distance = 10
 401 skirt_height = 1
 402 skirts = 3
 403 slowdown_below_layer_time = 50
 404 small_perimeter_speed = 50%
 405 solid_fill_pattern = rectilinear
 406 solid_infill_below_area = 0
 407 solid_infill_every_layers = 0
 408 solid_infill_speed = 100%
 409 solid_layers = 3
 410 start_gcode = G28 ; home all axes\nM92 E820
 411 support_material = 1
 412 support_material_angle = 45
 413 support_material_extruder = 1
 414 support_material_extrusion_width = 160%
 415 support_material_pattern = rectilinear
 416 support_material_spacing = 2
 417 support_material_threshold = 40
 418 temperature = 205
 419 threads = 2
 420 top_solid_infill_speed = 40%
 421 travel_speed = 90
 422 use_relative_e_distances = 0
 423 z_offset = 0
 424 </pre>
 425
 426 == Gelbes Filament ==
 427 * Ursprünglich für [[Reprap/Parent]] erstellt
 428 * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
 429 * etwas wärmer (195°C)
 430 * 0.22 mm z-offeset
 431 <pre style="height:200px;overflow:scroll;">
 432 acceleration = 0
 433 bed_size = 170,170
 434 bed_temperature = 60
 435 bridge_fan_speed = 100
 436 bridge_flow_ratio = 1
 437 bridge_speed = 30
 438 brim_width = 0
 439 complete_objects = 0
 440 cooling = 1
 441 disable_fan_first_layers = 1
 442 duplicate = 1
 443 duplicate_distance = 6
 444 duplicate_grid = 1,1
 445 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 446 external_perimeter_speed = 90%
 447 extra_perimeters = 1
 448 extruder_clearance_height = 20
 449 extruder_clearance_radius = 20
 450 extrusion_axis = E
 451 extrusion_multiplier = 1
 452 extrusion_width = 0
 453 fan_always_on = 0
 454 fan_below_layer_time = 60
 455 filament_diameter = 3
 456 fill_angle = 45
 457 fill_density = 0.15
 458 fill_pattern = rectilinear
 459 first_layer_bed_temperature = 60
 460 first_layer_extrusion_width = 0
 461 first_layer_height = 115%
 462 first_layer_speed = 80%
 463 first_layer_temperature = 200
 464 g0 = 0
 465 gcode_arcs = 0
 466 gcode_comments = 0
 467 gcode_flavor = reprap
 468 infill_acceleration = 50
 469 infill_every_layers = 1
 470 infill_extruder = 1
 471 infill_extrusion_width = 0
 472 infill_speed = 40
 473 layer_gcode =
 474 layer_height = 0.28
 475 max_fan_speed = 100
 476 min_fan_speed = 35
 477 min_print_speed = 10
 478 notes = Used for Mate name tag
 479 nozzle_diameter = 0.35
 480 output_filename_format = [input_filename_base].gcode
 481 perimeter_acceleration = 25
 482 perimeter_speed = 30
 483 perimeters = 3
 484 perimeters_extruder = 1
 485 perimeters_extrusion_width = 0
 486 post_process =
 487 print_center = 50,27
 488 randomize_start = 1
 489 retract_before_travel = 4
 490 retract_length = 3
 491 retract_lift = 0.4
 492 retract_restart_extra = 0
 493 retract_speed = 30
 494 rotate = 0
 495 scale = 1
 496 skirt_distance = 6
 497 skirt_height = 1
 498 skirts = 3
 499 slowdown_below_layer_time = 60
 500 small_perimeter_speed = 30
 501 solid_fill_pattern = rectilinear
 502 solid_infill_speed = 40
 503 solid_layers = 3
 504 start_gcode = G28 ; home all axes\nM92 E820
 505 support_material =
 506 support_material_angle = 45
 507 support_material_extruder = 1
 508 support_material_extrusion_width = 0
 509 support_material_pattern = rectilinear
 510 support_material_spacing = 2.5
 511 support_material_threshold = 45
 512 temperature = 195
 513 threads = 2
 514 top_solid_infill_speed = 40
 515 travel_speed = 130
 516 use_relative_e_distances = 0
 517 z_offset = 0.22
 518 </pre>
 519
 520 == RepRap-Config ==
 521 Konfiguration, mit der die Teile für den RepRap vom [http://netz39.eu Netz39] gedruckt wurden.
 522 <pre style="height:200px;overflow:scroll;">
 523 # generated by Slic3r 0.9.9-dev on Mon Jun  3 17:06:48 2013
 524 avoid_crossing_perimeters = 0
 525 bed_size = 180,200
 526 bed_temperature = 50
 527 bottom_solid_layers = 5
 528 bridge_acceleration = 0
 529 bridge_fan_speed = 100
 530 bridge_flow_ratio = 1
 531 bridge_speed = 30
 532 brim_width = 0
 533 complete_objects = 1
 534 cooling =
 535 default_acceleration = 0
 536 disable_fan_first_layers = 1
 537 duplicate = 1
 538 duplicate_distance = 6
 539 duplicate_grid = 1,1
 540 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
 541 external_perimeter_speed = 40%
 542 external_perimeters_first = 0
 543 extra_perimeters =
 544 extruder_clearance_height = 35
 545 extruder_clearance_radius = 62
 546 extruder_offset = 0x0
 547 extrusion_axis = E
 548 extrusion_multiplier = 1.1
 549 extrusion_width = 0
 550 fan_always_on = 0
 551 fan_below_layer_time = 60
 552 filament_diameter = 1.75
 553 fill_angle = 30
 554 fill_density = 0.5
 555 fill_pattern = rectilinear
 556 first_layer_bed_temperature = 50
 557 first_layer_extrusion_width = 0
 558 first_layer_height = 150%
 559 first_layer_speed = 40%
 560 first_layer_temperature = 197
 561 g0 = 0
 562 gap_fill_speed = 20
 563 gcode_arcs = 0
 564 gcode_comments = 0
 565 gcode_flavor = reprap
 566 infill_acceleration = 0
 567 infill_every_layers = 1
 568 infill_extruder = 1
 569 infill_extrusion_width = 0
 570 infill_first = 0
 571 infill_only_where_needed = 0
 572 infill_speed = 60
 573 layer_gcode =
 574 layer_height = 0.2
 575 max_fan_speed = 100
 576 min_fan_speed = 35
 577 min_print_speed = 5
 578 min_skirt_length = 15
 579 notes = config for printing netz39 pieces
 580 nozzle_diameter = 0.33
 581 only_retract_when_crossing_perimeters = 1
 582 output_filename_format = [input_filename_base].gcode
 583 perimeter_acceleration = 0
 584 perimeter_extruder = 1
 585 perimeter_extrusion_width = 0
 586 perimeter_speed = 60
 587 perimeters = 3
 588 post_process =
 589 print_center = 90,100
 590 raft_layers = 0
 591 randomize_start =
 592 resolution = 0
 593 retract_before_travel = 0
 594 retract_layer_change = 1
 595 retract_length = 2
 596 retract_length_toolchange = 5
 597 retract_lift = 0
 598 retract_restart_extra = 0
 599 retract_restart_extra_toolchange = 0
 600 retract_speed = 50
 601 rotate = 0
 602 scale = 1
 603 skirt_distance = 5
 604 skirt_height = 1
 605 skirts = 2
 606 slowdown_below_layer_time = 50
 607 small_perimeter_speed = 60%
 608 solid_fill_pattern = rectilinear
 609 solid_infill_below_area = 0
 610 solid_infill_every_layers = 0
 611 solid_infill_extrusion_width = 0
 612 solid_infill_speed = 100%
 613 start_gcode = G28 ; home all axes\nM92 E820
 614 support_material =
 615 support_material_angle = 45
 616 support_material_enforce_layers = 0
 617 support_material_extruder = 1
 618 support_material_extrusion_width = 0
 619 support_material_interface_layers = 0
 620 support_material_interface_spacing = 0
 621 support_material_pattern = rectilinear
 622 support_material_spacing = 2
 623 support_material_speed = 60
 624 support_material_threshold = 41
 625 temperature = 188
 626 threads = 2
 627 toolchange_gcode =
 628 top_infill_extrusion_width = 0
 629 top_solid_infill_speed = 70%
 630 top_solid_layers = 5
 631 travel_speed = 100
 632 use_relative_e_distances = 0
 633 vibration_limit = 0
 634 z_offset = 0
 635 </pre>
 636
 637 [[Kategorie:RepRap]]