3D-Drucker%2FSlicerBundle.ini.mw

   1 # generated by Slic3r 1.2.9 on Thu May 19 15:50:57 2016
   2
   3 [filament:Lulzbot PLA Weiß]
   4 bed_temperature = 50
   5 bridge_fan_speed = 100
   6 cooling = 1
   7 disable_fan_first_layers = 1
   8 extrusion_multiplier = 1
   9 fan_always_on = 0
  10 fan_below_layer_time = 60
  11 filament_colour = #FFFFFF
  12 filament_diameter = 2.85
  13 first_layer_bed_temperature = 55
  14 first_layer_temperature = 200
  15 max_fan_speed = 100
  16 min_fan_speed = 30
  17 min_print_speed = 10
  18 slowdown_below_layer_time = 20
  19 temperature = 190
  20
  21 [filament:MendelPro ABS]
  22 bed_temperature = 0
  23 bridge_fan_speed = 100
  24 cooling = 0
  25 disable_fan_first_layers = 1
  26 extrusion_multiplier = 1
  27 fan_always_on = 0
  28 fan_below_layer_time = 60
  29 filament_colour = #FFFFFF
  30 filament_diameter = 1.7
  31 first_layer_bed_temperature = 0
  32 first_layer_temperature = 250
  33 max_fan_speed = 100
  34 min_fan_speed = 50
  35 min_print_speed = 5
  36 slowdown_below_layer_time = 30
  37 temperature = 245
  38
  39 [filament:MendelPro Holz]
  40 bed_temperature = 50
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 1
  44 extrusion_multiplier = 1
  45 fan_always_on = 1
  46 fan_below_layer_time = 60
  47 filament_colour = #FFFFFF
  48 filament_diameter = 1.7
  49 first_layer_bed_temperature = 55
  50 first_layer_temperature = 200
  51 max_fan_speed = 100
  52 min_fan_speed = 50
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 30
  55 temperature = 185
  56
  57 [filament:MendelPro PLA]
  58 bed_temperature = 50
  59 bridge_fan_speed = 100
  60 cooling = 1
  61 disable_fan_first_layers = 1
  62 extrusion_multiplier = 1
  63 fan_always_on = 1
  64 fan_below_layer_time = 60
  65 filament_colour = #FFFFFF
  66 filament_diameter = 1.7
  67 first_layer_bed_temperature = 50
  68 first_layer_temperature = 200
  69 max_fan_speed = 100
  70 min_fan_speed = 50
  71 min_print_speed = 5
  72 slowdown_below_layer_time = 30
  73 temperature = 180
  74
  75 [filament:MendelPro PLA fast]
  76 bed_temperature = 50
  77 bridge_fan_speed = 100
  78 cooling = 1
  79 disable_fan_first_layers = 1
  80 extrusion_multiplier = 1
  81 fan_always_on = 1
  82 fan_below_layer_time = 60
  83 filament_colour = #FFFFFF
  84 filament_diameter = 1.7
  85 first_layer_bed_temperature = 50
  86 first_layer_temperature = 200
  87 max_fan_speed = 100
  88 min_fan_speed = 50
  89 min_print_speed = 5
  90 slowdown_below_layer_time = 30
  91 temperature = 100
  92
  93 [filament:TinyBoy PLA]
  94 bed_temperature = 0
  95 bridge_fan_speed = 100
  96 cooling = 1
  97 disable_fan_first_layers = 2
  98 extrusion_multiplier = 0.9
  99 fan_always_on = 1
 100 fan_below_layer_time = 60
 101 filament_colour = #35E1FF
 102 filament_diameter = 1.7
 103 first_layer_bed_temperature = 0
 104 first_layer_temperature = 200
 105 max_fan_speed = 50
 106 min_fan_speed = 35
 107 min_print_speed = 5
 108 slowdown_below_layer_time = 15
 109 temperature = 185
 110
 111 [filament:prusa i3 PLA black fine]
 112 bed_temperature = 50
 113 bridge_fan_speed = 100
 114 cooling = 1
 115 disable_fan_first_layers = 1
 116 extrusion_multiplier = 1
 117 fan_always_on = 1
 118 fan_below_layer_time = 60
 119 filament_colour = #FF0000
 120 filament_diameter = 2.9
 121 first_layer_bed_temperature = 50
 122 first_layer_temperature = 200
 123 max_fan_speed = 100
 124 min_fan_speed = 100
 125 min_print_speed = 5
 126 slowdown_below_layer_time = 15
 127 temperature = 200
 128
 129 [filament:prusa i3 PLA igus]
 130 bed_temperature = 50
 131 bridge_fan_speed = 100
 132 cooling = 0
 133 disable_fan_first_layers = 1
 134 extrusion_multiplier = 0.9
 135 fan_always_on = 0
 136 fan_below_layer_time = 60
 137 filament_colour = #D0C9B0
 138 filament_diameter = 2.9
 139 first_layer_bed_temperature = 50
 140 first_layer_temperature = 250
 141 max_fan_speed = 100
 142 min_fan_speed = 35
 143 min_print_speed = 5
 144 slowdown_below_layer_time = 15
 145 temperature = 250
 146
 147 [filament:prusa i3 PLA lila]
 148 bed_temperature = 50
 149 bridge_fan_speed = 100
 150 cooling = 1
 151 disable_fan_first_layers = 1
 152 extrusion_multiplier = 1
 153 fan_always_on = 1
 154 fan_below_layer_time = 60
 155 filament_colour = #8000FF
 156 filament_diameter = 3
 157 first_layer_bed_temperature = 50
 158 first_layer_temperature = 200
 159 max_fan_speed = 100
 160 min_fan_speed = 35
 161 min_print_speed = 5
 162 slowdown_below_layer_time = 15
 163 temperature = 200
 164
 165 [presets]
 166 filament = MendelPro PLA fast.ini
 167 print = MendelPro.ini
 168 printer = MendelPro.ini
 169
 170 [print:Lulzbot]
 171 avoid_crossing_perimeters = 1
 172 bottom_solid_layers = 4
 173 bridge_acceleration = 0
 174 bridge_flow_ratio = 1
 175 bridge_speed = 40
 176 brim_width = 0
 177 complete_objects = 0
 178 default_acceleration = 0
 179 dont_support_bridges = 1
 180 external_fill_pattern = rectilinear
 181 external_perimeter_extrusion_width = 0
 182 external_perimeter_speed = 30
 183 external_perimeters_first = 0
 184 extra_perimeters = 1
 185 extruder_clearance_height = 20
 186 extruder_clearance_radius = 20
 187 extrusion_width = 0
 188 fill_angle = 35
 189 fill_density = 30%
 190 fill_pattern = line
 191 first_layer_acceleration = 0
 192 first_layer_extrusion_width = 0
 193 first_layer_height = 0.2
 194 first_layer_speed = 10
 195 gap_fill_speed = 20
 196 gcode_comments = 0
 197 infill_acceleration = 0
 198 infill_every_layers = 2
 199 infill_extruder = 1
 200 infill_extrusion_width = 0
 201 infill_first = 0
 202 infill_only_where_needed = 0
 203 infill_overlap = 15%
 204 infill_speed = 0
 205 interface_shells = 0
 206 layer_height = 0.25
 207 max_print_speed = 80
 208 max_volumetric_speed = 0
 209 min_skirt_length = 0
 210 notes =
 211 only_retract_when_crossing_perimeters = 0
 212 ooze_prevention = 0
 213 output_filename_format = [input_filename_base].gcode
 214 overhangs = 1
 215 perimeter_acceleration = 0
 216 perimeter_extruder = 1
 217 perimeter_extrusion_width = 0
 218 perimeter_speed = 0
 219 perimeters = 3
 220 post_process =
 221 raft_layers = 0
 222 resolution = 0
 223 seam_position = aligned
 224 skirt_distance = 6
 225 skirt_height = 1
 226 skirts = 2
 227 small_perimeter_speed = 30
 228 solid_infill_below_area = 30
 229 solid_infill_every_layers = 0
 230 solid_infill_extruder = 1
 231 solid_infill_extrusion_width = 0
 232 solid_infill_speed = 0
 233 spiral_vase = 0
 234 standby_temperature_delta = -5
 235 support_material = 0
 236 support_material_angle = 0
 237 support_material_contact_distance = 0.2
 238 support_material_enforce_layers = 0
 239 support_material_extruder = 1
 240 support_material_extrusion_width = 0
 241 support_material_interface_extruder = 1
 242 support_material_interface_layers = 0
 243 support_material_interface_spacing = 0
 244 support_material_interface_speed = 100%
 245 support_material_pattern = rectilinear
 246 support_material_spacing = 2.5
 247 support_material_speed = 0
 248 support_material_threshold = 45
 249 thin_walls = 1
 250 threads = 2
 251 top_infill_extrusion_width = 0
 252 top_solid_infill_speed = 0
 253 top_solid_layers = 4
 254 travel_speed = 100
 255 xy_size_compensation = 0
 256
 257 [print:MendelPro]
 258 avoid_crossing_perimeters = 0
 259 bottom_solid_layers = 3
 260 bridge_acceleration = 0
 261 bridge_flow_ratio = 1
 262 bridge_speed = 40
 263 brim_width = 0
 264 complete_objects = 0
 265 default_acceleration = 0
 266 dont_support_bridges = 1
 267 external_fill_pattern = rectilinear
 268 external_perimeter_extrusion_width = 0
 269 external_perimeter_speed = 20
 270 external_perimeters_first = 0
 271 extra_perimeters = 1
 272 extruder_clearance_height = 20
 273 extruder_clearance_radius = 20
 274 extrusion_width = 0
 275 fill_angle = 45
 276 fill_density = 15%
 277 fill_pattern = rectilinear
 278 first_layer_acceleration = 0
 279 first_layer_extrusion_width = 0
 280 first_layer_height = 0.2
 281 first_layer_speed = 10
 282 gap_fill_speed = 10
 283 gcode_comments = 0
 284 infill_acceleration = 0
 285 infill_every_layers = 1
 286 infill_extruder = 1
 287 infill_extrusion_width = 0
 288 infill_first = 0
 289 infill_only_where_needed = 0
 290 infill_overlap = 15%
 291 infill_speed = 0
 292 interface_shells = 0
 293 layer_height = 0.2
 294 max_print_speed = 80
 295 max_volumetric_speed = 0
 296 min_skirt_length = 2
 297 notes =
 298 only_retract_when_crossing_perimeters = 1
 299 ooze_prevention = 0
 300 output_filename_format = [input_filename_base].gcode
 301 overhangs = 1
 302 perimeter_acceleration = 0
 303 perimeter_extruder = 1
 304 perimeter_extrusion_width = 0
 305 perimeter_speed = 0
 306 perimeters = 2
 307 post_process =
 308 raft_layers = 0
 309 resolution = 0
 310 seam_position = aligned
 311 skirt_distance = 1
 312 skirt_height = 1
 313 skirts = 1
 314 small_perimeter_speed = 10
 315 solid_infill_below_area = 70
 316 solid_infill_every_layers = 0
 317 solid_infill_extruder = 1
 318 solid_infill_extrusion_width = 0
 319 solid_infill_speed = 0
 320 spiral_vase = 0
 321 standby_temperature_delta = -5
 322 support_material = 0
 323 support_material_angle = 0
 324 support_material_contact_distance = 0.2
 325 support_material_enforce_layers = 0
 326 support_material_extruder = 1
 327 support_material_extrusion_width = 0
 328 support_material_interface_extruder = 1
 329 support_material_interface_layers = 2
 330 support_material_interface_spacing = 0
 331 support_material_interface_speed = 100%
 332 support_material_pattern = rectilinear
 333 support_material_spacing = 5
 334 support_material_speed = 0
 335 support_material_threshold = 40
 336 thin_walls = 1
 337 threads = 2
 338 top_infill_extrusion_width = 0
 339 top_solid_infill_speed = 20
 340 top_solid_layers = 3
 341 travel_speed = 100
 342 xy_size_compensation = 0
 343
 344 [print:MendelPro fast]
 345 avoid_crossing_perimeters = 0
 346 bottom_solid_layers = 3
 347 bridge_acceleration = 0
 348 bridge_flow_ratio = 1
 349 bridge_speed = 40
 350 brim_width = 0
 351 complete_objects = 0
 352 default_acceleration = 0
 353 dont_support_bridges = 1
 354 external_fill_pattern = rectilinear
 355 external_perimeter_extrusion_width = 0
 356 external_perimeter_speed = 20
 357 external_perimeters_first = 0
 358 extra_perimeters = 1
 359 extruder_clearance_height = 20
 360 extruder_clearance_radius = 20
 361 extrusion_width = 0
 362 fill_angle = 45
 363 fill_density = 15%
 364 fill_pattern = rectilinear
 365 first_layer_acceleration = 0
 366 first_layer_extrusion_width = 0
 367 first_layer_height = 0.2
 368 first_layer_speed = 10
 369 gap_fill_speed = 10
 370 gcode_comments = 0
 371 infill_acceleration = 0
 372 infill_every_layers = 1
 373 infill_extruder = 1
 374 infill_extrusion_width = 0
 375 infill_first = 0
 376 infill_only_where_needed = 0
 377 infill_overlap = 15%
 378 infill_speed = 0
 379 interface_shells = 0
 380 layer_height = 0.5
 381 max_print_speed = 80
 382 max_volumetric_speed = 0
 383 min_skirt_length = 2
 384 notes =
 385 only_retract_when_crossing_perimeters = 1
 386 ooze_prevention = 0
 387 output_filename_format = [input_filename_base].gcode
 388 overhangs = 1
 389 perimeter_acceleration = 0
 390 perimeter_extruder = 1
 391 perimeter_extrusion_width = 0
 392 perimeter_speed = 0
 393 perimeters = 2
 394 post_process =
 395 raft_layers = 0
 396 resolution = 0
 397 seam_position = aligned
 398 skirt_distance = 1
 399 skirt_height = 1
 400 skirts = 1
 401 small_perimeter_speed = 10
 402 solid_infill_below_area = 70
 403 solid_infill_every_layers = 0
 404 solid_infill_extruder = 1
 405 solid_infill_extrusion_width = 0
 406 solid_infill_speed = 0
 407 spiral_vase = 0
 408 standby_temperature_delta = -5
 409 support_material = 0
 410 support_material_angle = 0
 411 support_material_contact_distance = 0.2
 412 support_material_enforce_layers = 0
 413 support_material_extruder = 1
 414 support_material_extrusion_width = 0
 415 support_material_interface_extruder = 1
 416 support_material_interface_layers = 2
 417 support_material_interface_spacing = 0
 418 support_material_interface_speed = 100%
 419 support_material_pattern = rectilinear
 420 support_material_spacing = 5
 421 support_material_speed = 0
 422 support_material_threshold = 40
 423 thin_walls = 1
 424 threads = 2
 425 top_infill_extrusion_width = 0
 426 top_solid_infill_speed = 20
 427 top_solid_layers = 3
 428 travel_speed = 100
 429 xy_size_compensation = 0
 430
 431 [print:TinyBoy]
 432 avoid_crossing_perimeters = 0
 433 bottom_solid_layers = 3
 434 bridge_acceleration = 0
 435 bridge_flow_ratio = 1
 436 bridge_speed = 0
 437 brim_width = 0
 438 complete_objects = 0
 439 default_acceleration = 0
 440 dont_support_bridges = 1
 441 external_fill_pattern = rectilinear
 442 external_perimeter_extrusion_width = 0
 443 external_perimeter_speed = 0
 444 external_perimeters_first = 0
 445 extra_perimeters = 1
 446 extruder_clearance_height = 20
 447 extruder_clearance_radius = 20
 448 extrusion_width = 0
 449 fill_angle = 45
 450 fill_density = 15%
 451 fill_pattern = rectilinear
 452 first_layer_acceleration = 0
 453 first_layer_extrusion_width = 150%
 454 first_layer_height = 0.2
 455 first_layer_speed = 20
 456 gap_fill_speed = 0
 457 gcode_comments = 0
 458 infill_acceleration = 0
 459 infill_every_layers = 1
 460 infill_extruder = 1
 461 infill_extrusion_width = 0
 462 infill_first = 0
 463 infill_only_where_needed = 0
 464 infill_overlap = 15%
 465 infill_speed = 0
 466 interface_shells = 0
 467 layer_height = 0.2
 468 max_print_speed = 50
 469 max_volumetric_speed = 0
 470 min_skirt_length = 1
 471 notes =
 472 only_retract_when_crossing_perimeters = 1
 473 ooze_prevention = 0
 474 output_filename_format = [input_filename_base].gcode
 475 overhangs = 1
 476 perimeter_acceleration = 0
 477 perimeter_extruder = 1
 478 perimeter_extrusion_width = 0
 479 perimeter_speed = 0
 480 perimeters = 2
 481 post_process =
 482 raft_layers = 0
 483 resolution = 0
 484 seam_position = aligned
 485 skirt_distance = 1
 486 skirt_height = 1
 487 skirts = 1
 488 small_perimeter_speed = 0
 489 solid_infill_below_area = 70
 490 solid_infill_every_layers = 0
 491 solid_infill_extruder = 1
 492 solid_infill_extrusion_width = 0
 493 solid_infill_speed = 0
 494 spiral_vase = 0
 495 standby_temperature_delta = -5
 496 support_material = 0
 497 support_material_angle = 0
 498 support_material_contact_distance = 0.2
 499 support_material_enforce_layers = 0
 500 support_material_extruder = 1
 501 support_material_extrusion_width = 0
 502 support_material_interface_extruder = 1
 503 support_material_interface_layers = 2
 504 support_material_interface_spacing = 0
 505 support_material_interface_speed = 100%
 506 support_material_pattern = rectilinear
 507 support_material_spacing = 5
 508 support_material_speed = 0
 509 support_material_threshold = 40
 510 thin_walls = 1
 511 threads = 2
 512 top_infill_extrusion_width = 0
 513 top_solid_infill_speed = 0
 514 top_solid_layers = 3
 515 travel_speed = 100
 516 xy_size_compensation = 0
 517
 518 [print:prusa i3 100]
 519 avoid_crossing_perimeters = 0
 520 bottom_solid_layers = 3
 521 bridge_acceleration = 0
 522 bridge_flow_ratio = 1
 523 bridge_speed = 40
 524 brim_width = 0
 525 complete_objects = 0
 526 default_acceleration = 0
 527 dont_support_bridges = 1
 528 external_fill_pattern = rectilinear
 529 external_perimeter_extrusion_width = 0
 530 external_perimeter_speed = 10
 531 external_perimeters_first = 0
 532 extra_perimeters = 1
 533 extruder_clearance_height = 20
 534 extruder_clearance_radius = 20
 535 extrusion_width = 0
 536 fill_angle = 45
 537 fill_density = 20%
 538 fill_pattern = rectilinear
 539 first_layer_acceleration = 0
 540 first_layer_extrusion_width = 0
 541 first_layer_height = 0.2
 542 first_layer_speed = 10
 543 gap_fill_speed = 10
 544 gcode_comments = 0
 545 infill_acceleration = 0
 546 infill_every_layers = 1
 547 infill_extruder = 1
 548 infill_extrusion_width = 110%
 549 infill_first = 0
 550 infill_only_where_needed = 0
 551 infill_overlap = 15%
 552 infill_speed = 0
 553 interface_shells = 0
 554 layer_height = 0.1
 555 max_print_speed = 80
 556 max_volumetric_speed = 0
 557 min_skirt_length = 1
 558 notes =
 559 only_retract_when_crossing_perimeters = 1
 560 ooze_prevention = 0
 561 output_filename_format = [input_filename_base].gcode
 562 overhangs = 1
 563 perimeter_acceleration = 0
 564 perimeter_extruder = 1
 565 perimeter_extrusion_width = 0
 566 perimeter_speed = 0
 567 perimeters = 3
 568 post_process =
 569 raft_layers = 0
 570 resolution = 0
 571 seam_position = aligned
 572 skirt_distance = 6
 573 skirt_height = 1
 574 skirts = 3
 575 small_perimeter_speed = 10
 576 solid_infill_below_area = 70
 577 solid_infill_every_layers = 0
 578 solid_infill_extruder = 1
 579 solid_infill_extrusion_width = 0
 580 solid_infill_speed = 0
 581 spiral_vase = 0
 582 standby_temperature_delta = -5
 583 support_material = 0
 584 support_material_angle = 0
 585 support_material_contact_distance = 0.2
 586 support_material_enforce_layers = 0
 587 support_material_extruder = 1
 588 support_material_extrusion_width = 0
 589 support_material_interface_extruder = 1
 590 support_material_interface_layers = 2
 591 support_material_interface_spacing = 0
 592 support_material_interface_speed = 100%
 593 support_material_pattern = rectilinear
 594 support_material_spacing = 5
 595 support_material_speed = 0
 596 support_material_threshold = 40
 597 thin_walls = 1
 598 threads = 2
 599 top_infill_extrusion_width = 0
 600 top_solid_infill_speed = 10
 601 top_solid_layers = 3
 602 travel_speed = 100
 603 xy_size_compensation = 0
 604
 605 [print:prusa i3 250]
 606 avoid_crossing_perimeters = 0
 607 bottom_solid_layers = 3
 608 bridge_acceleration = 0
 609 bridge_flow_ratio = 1
 610 bridge_speed = 40
 611 brim_width = 0
 612 complete_objects = 0
 613 default_acceleration = 0
 614 dont_support_bridges = 1
 615 external_fill_pattern = rectilinear
 616 external_perimeter_extrusion_width = 0
 617 external_perimeter_speed = 10
 618 external_perimeters_first = 0
 619 extra_perimeters = 1
 620 extruder_clearance_height = 20
 621 extruder_clearance_radius = 20
 622 extrusion_width = 0
 623 fill_angle = 45
 624 fill_density = 20%
 625 fill_pattern = rectilinear
 626 first_layer_acceleration = 0
 627 first_layer_extrusion_width = 0
 628 first_layer_height = 0.2
 629 first_layer_speed = 15
 630 gap_fill_speed = 10
 631 gcode_comments = 0
 632 infill_acceleration = 0
 633 infill_every_layers = 1
 634 infill_extruder = 1
 635 infill_extrusion_width = 110%
 636 infill_first = 0
 637 infill_only_where_needed = 0
 638 infill_overlap = 15%
 639 infill_speed = 0
 640 interface_shells = 0
 641 layer_height = 0.25
 642 max_print_speed = 60
 643 max_volumetric_speed = 0
 644 min_skirt_length = 1
 645 notes =
 646 only_retract_when_crossing_perimeters = 1
 647 ooze_prevention = 0
 648 output_filename_format = [input_filename_base].gcode
 649 overhangs = 1
 650 perimeter_acceleration = 0
 651 perimeter_extruder = 1
 652 perimeter_extrusion_width = 0
 653 perimeter_speed = 0
 654 perimeters = 2
 655 post_process =
 656 raft_layers = 0
 657 resolution = 0
 658 seam_position = aligned
 659 skirt_distance = 1
 660 skirt_height = 1
 661 skirts = 1
 662 small_perimeter_speed = 10
 663 solid_infill_below_area = 70
 664 solid_infill_every_layers = 0
 665 solid_infill_extruder = 1
 666 solid_infill_extrusion_width = 0
 667 solid_infill_speed = 0
 668 spiral_vase = 0
 669 standby_temperature_delta = -5
 670 support_material = 0
 671 support_material_angle = 0
 672 support_material_contact_distance = 0.2
 673 support_material_enforce_layers = 0
 674 support_material_extruder = 1
 675 support_material_extrusion_width = 0
 676 support_material_interface_extruder = 1
 677 support_material_interface_layers = 2
 678 support_material_interface_spacing = 0
 679 support_material_interface_speed = 100%
 680 support_material_pattern = rectilinear
 681 support_material_spacing = 5
 682 support_material_speed = 0
 683 support_material_threshold = 40
 684 thin_walls = 1
 685 threads = 2
 686 top_infill_extrusion_width = 0
 687 top_solid_infill_speed = 20
 688 top_solid_layers = 3
 689 travel_speed = 100
 690 xy_size_compensation = 0
 691
 692 [print:prusa i3 400]
 693 avoid_crossing_perimeters = 0
 694 bottom_solid_layers = 3
 695 bridge_acceleration = 0
 696 bridge_flow_ratio = 1
 697 bridge_speed = 60
 698 brim_width = 0
 699 complete_objects = 0
 700 default_acceleration = 0
 701 dont_support_bridges = 1
 702 external_fill_pattern = rectilinear
 703 external_perimeter_extrusion_width = 0
 704 external_perimeter_speed = 20
 705 external_perimeters_first = 0
 706 extra_perimeters = 1
 707 extruder_clearance_height = 20
 708 extruder_clearance_radius = 20
 709 extrusion_width = 0
 710 fill_angle = 45
 711 fill_density = 20%
 712 fill_pattern = rectilinear
 713 first_layer_acceleration = 0
 714 first_layer_extrusion_width = 0
 715 first_layer_height = 0.2
 716 first_layer_speed = 10
 717 gap_fill_speed = 10
 718 gcode_comments = 0
 719 infill_acceleration = 0
 720 infill_every_layers = 1
 721 infill_extruder = 1
 722 infill_extrusion_width = 110%
 723 infill_first = 0
 724 infill_only_where_needed = 0
 725 infill_overlap = 15%
 726 infill_speed = 0
 727 interface_shells = 0
 728 layer_height = 0.4
 729 max_print_speed = 80
 730 max_volumetric_speed = 0
 731 min_skirt_length = 1
 732 notes =
 733 only_retract_when_crossing_perimeters = 1
 734 ooze_prevention = 0
 735 output_filename_format = [input_filename_base].gcode
 736 overhangs = 1
 737 perimeter_acceleration = 0
 738 perimeter_extruder = 1
 739 perimeter_extrusion_width = 0
 740 perimeter_speed = 0
 741 perimeters = 2
 742 post_process =
 743 raft_layers = 0
 744 resolution = 0
 745 seam_position = aligned
 746 skirt_distance = 1
 747 skirt_height = 1
 748 skirts = 1
 749 small_perimeter_speed = 10
 750 solid_infill_below_area = 70
 751 solid_infill_every_layers = 0
 752 solid_infill_extruder = 1
 753 solid_infill_extrusion_width = 0
 754 solid_infill_speed = 0
 755 spiral_vase = 0
 756 standby_temperature_delta = -5
 757 support_material = 0
 758 support_material_angle = 0
 759 support_material_contact_distance = 0.2
 760 support_material_enforce_layers = 0
 761 support_material_extruder = 1
 762 support_material_extrusion_width = 0
 763 support_material_interface_extruder = 1
 764 support_material_interface_layers = 2
 765 support_material_interface_spacing = 0
 766 support_material_interface_speed = 100%
 767 support_material_pattern = rectilinear
 768 support_material_spacing = 5
 769 support_material_speed = 0
 770 support_material_threshold = 40
 771 thin_walls = 1
 772 threads = 2
 773 top_infill_extrusion_width = 0
 774 top_solid_infill_speed = 20
 775 top_solid_layers = 3
 776 travel_speed = 100
 777 xy_size_compensation = 0
 778
 779 [print:prusa i3 400 sup]
 780 avoid_crossing_perimeters = 0
 781 bottom_solid_layers = 3
 782 bridge_acceleration = 0
 783 bridge_flow_ratio = 1
 784 bridge_speed = 60
 785 brim_width = 0
 786 complete_objects = 0
 787 default_acceleration = 0
 788 dont_support_bridges = 1
 789 external_fill_pattern = rectilinear
 790 external_perimeter_extrusion_width = 0
 791 external_perimeter_speed = 20
 792 external_perimeters_first = 0
 793 extra_perimeters = 1
 794 extruder_clearance_height = 20
 795 extruder_clearance_radius = 20
 796 extrusion_width = 0
 797 fill_angle = 45
 798 fill_density = 20%
 799 fill_pattern = rectilinear
 800 first_layer_acceleration = 0
 801 first_layer_extrusion_width = 0
 802 first_layer_height = 0.2
 803 first_layer_speed = 10
 804 gap_fill_speed = 10
 805 gcode_comments = 0
 806 infill_acceleration = 0
 807 infill_every_layers = 1
 808 infill_extruder = 1
 809 infill_extrusion_width = 0
 810 infill_first = 0
 811 infill_only_where_needed = 0
 812 infill_overlap = 15%
 813 infill_speed = 0
 814 interface_shells = 0
 815 layer_height = 0.4
 816 max_print_speed = 80
 817 max_volumetric_speed = 0
 818 min_skirt_length = 1
 819 notes =
 820 only_retract_when_crossing_perimeters = 1
 821 ooze_prevention = 0
 822 output_filename_format = [input_filename_base].gcode
 823 overhangs = 1
 824 perimeter_acceleration = 0
 825 perimeter_extruder = 1
 826 perimeter_extrusion_width = 0
 827 perimeter_speed = 0
 828 perimeters = 2
 829 post_process =
 830 raft_layers = 0
 831 resolution = 0
 832 seam_position = aligned
 833 skirt_distance = 1
 834 skirt_height = 1
 835 skirts = 1
 836 small_perimeter_speed = 10
 837 solid_infill_below_area = 70
 838 solid_infill_every_layers = 0
 839 solid_infill_extruder = 1
 840 solid_infill_extrusion_width = 0
 841 solid_infill_speed = 0
 842 spiral_vase = 0
 843 standby_temperature_delta = -5
 844 support_material = 1
 845 support_material_angle = 0
 846 support_material_contact_distance = 0.3
 847 support_material_enforce_layers = 0
 848 support_material_extruder = 1
 849 support_material_extrusion_width = 0
 850 support_material_interface_extruder = 1
 851 support_material_interface_layers = 2
 852 support_material_interface_spacing = 2
 853 support_material_interface_speed = 100%
 854 support_material_pattern = rectilinear
 855 support_material_spacing = 5
 856 support_material_speed = 0
 857 support_material_threshold = 40
 858 thin_walls = 1
 859 threads = 2
 860 top_infill_extrusion_width = 0
 861 top_solid_infill_speed = 20
 862 top_solid_layers = 3
 863 travel_speed = 100
 864 xy_size_compensation = 0
 865
 866 [printer:Lulzbot]
 867 bed_shape = 0x0,298x0,298x275,0x275
 868 before_layer_gcode =
 869 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors
 870 extruder_offset = 0x0
 871 gcode_flavor = reprap
 872 layer_gcode =
 873 nozzle_diameter = 0.35
 874 octoprint_apikey =
 875 octoprint_host =
 876 pressure_advance = 0
 877 retract_before_travel = 2
 878 retract_layer_change = 1
 879 retract_length = 1.75
 880 retract_length_toolchange = 3
 881 retract_lift = 0
 882 retract_restart_extra = 0
 883 retract_restart_extra_toolchange = 0
 884 retract_speed = 20
 885 start_gcode = G28 ; home all axes\n
 886 toolchange_gcode =
 887 use_firmware_retraction = 0
 888 use_relative_e_distances = 0
 889 use_volumetric_e = 0
 890 vibration_limit = 0
 891 wipe = 0
 892 z_offset = 0
 893
 894 [printer:MendelPro]
 895 bed_shape = 0x0,220x0,220x177,0x177
 896 before_layer_gcode =
 897 end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n
 898 extruder_offset = 0x0
 899 gcode_flavor = reprap
 900 layer_gcode =
 901 nozzle_diameter = 0.5
 902 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 903 octoprint_host =
 904 pressure_advance = 0
 905 retract_before_travel = 2
 906 retract_layer_change = 1
 907 retract_length = 5
 908 retract_length_toolchange = 10
 909 retract_lift = 0
 910 retract_restart_extra = 0
 911 retract_restart_extra_toolchange = 0
 912 retract_speed = 40
 913 start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
 914 toolchange_gcode =
 915 use_firmware_retraction = 0
 916 use_relative_e_distances = 0
 917 use_volumetric_e = 0
 918 vibration_limit = 0
 919 wipe = 0
 920 z_offset = 0
 921
 922 [printer:TinyBoy]
 923 bed_shape = 0x0,88x0,88x74,0x74
 924 before_layer_gcode =
 925 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nM84               ; disable motors\n
 926 extruder_offset = 0x0
 927 gcode_flavor = reprap
 928 layer_gcode =
 929 nozzle_diameter = 0.4
 930 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 931 octoprint_host =
 932 pressure_advance = 0
 933 retract_before_travel = 2
 934 retract_layer_change = 1
 935 retract_length = 5
 936 retract_length_toolchange = 10
 937 retract_lift = 0
 938 retract_restart_extra = 0
 939 retract_restart_extra_toolchange = 0
 940 retract_speed = 40
 941 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 942 toolchange_gcode =
 943 use_firmware_retraction = 0
 944 use_relative_e_distances = 0
 945 use_volumetric_e = 0
 946 vibration_limit = 0
 947 wipe = 0
 948 z_offset = 0
 949
 950 [printer:prusa i3]
 951 bed_shape = 0x0,190x0,190x190,0x190
 952 before_layer_gcode =
 953 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\n\n
 954 extruder_offset = 0x0
 955 gcode_flavor = reprap
 956 layer_gcode =
 957 nozzle_diameter = 0.4
 958 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 959 octoprint_host =
 960 pressure_advance = 0
 961 retract_before_travel = 2
 962 retract_layer_change = 1
 963 retract_length = 5
 964 retract_length_toolchange = 10
 965 retract_lift = 0
 966 retract_restart_extra = 0
 967 retract_restart_extra_toolchange = 0
 968 retract_speed = 40
 969 start_gcode = G28 Z            ; home Z\n\nG28 X Y         ; home X Y\n
 970 toolchange_gcode =
 971 use_firmware_retraction = 0
 972 use_relative_e_distances = 0
 973 use_volumetric_e = 0
 974 vibration_limit = 0
 975 wipe = 0
 976 z_offset = 0
 977
 978 [settings]
 979 autocenter = 1
 980 mode = expert