3D-Drucker%2FSlicerBundle.ini.mw

   1 # generated by Slic3r 1.2.9 on Sun Apr 24 23:42:45 2016
   2
   3 [filament:LULZBOT PLA]
   4 bed_temperature = 50
   5 bridge_fan_speed = 100
   6 cooling = 1
   7 disable_fan_first_layers = 1
   8 extrusion_multiplier = 1
   9 fan_always_on = 0
  10 fan_below_layer_time = 60
  11 filament_colour = #FFFFFF
  12 filament_diameter = 2.89
  13 first_layer_bed_temperature = 55
  14 first_layer_temperature = 190
  15 max_fan_speed = 100
  16 min_fan_speed = 35
  17 min_print_speed = 25
  18 slowdown_below_layer_time = 25
  19 temperature = 185
  20
  21 [filament:MendelPro PLA]
  22 bed_temperature = 50
  23 bridge_fan_speed = 100
  24 cooling = 1
  25 disable_fan_first_layers = 1
  26 extrusion_multiplier = 1
  27 fan_always_on = 1
  28 fan_below_layer_time = 60
  29 filament_colour = #FFFFFF
  30 filament_diameter = 1.7
  31 first_layer_bed_temperature = 55
  32 first_layer_temperature = 200
  33 max_fan_speed = 100
  34 min_fan_speed = 50
  35 min_print_speed = 5
  36 slowdown_below_layer_time = 30
  37 temperature = 180
  38
  39 [filament:TinyBoy PLA]
  40 bed_temperature = 0
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 2
  44 extrusion_multiplier = 1
  45 fan_always_on = 1
  46 fan_below_layer_time = 60
  47 filament_colour = #35E1FF
  48 filament_diameter = 1.7
  49 first_layer_bed_temperature = 0
  50 first_layer_temperature = 200
  51 max_fan_speed = 100
  52 min_fan_speed = 35
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 15
  55 temperature = 185
  56
  57 [filament:prusa i3 PLA]
  58 bed_temperature = 50
  59 bridge_fan_speed = 100
  60 cooling = 1
  61 disable_fan_first_layers = 1
  62 extrusion_multiplier = 1
  63 fan_always_on = 1
  64 fan_below_layer_time = 60
  65 filament_colour = #FFFFFF
  66 filament_diameter = 2.8
  67 first_layer_bed_temperature = 55
  68 first_layer_temperature = 200
  69 max_fan_speed = 100
  70 min_fan_speed = 50
  71 min_print_speed = 5
  72 slowdown_below_layer_time = 30
  73 temperature = 180
  74
  75 [presets]
  76 filament = TinyBoy PLA.ini
  77 print = MendelPro.ini
  78 printer = MendelPro.ini
  79
  80 [print:LULZBOT]
  81 avoid_crossing_perimeters = 0
  82 bottom_solid_layers = 3
  83 bridge_acceleration = 2000
  84 bridge_flow_ratio = 1
  85 bridge_speed = 72
  86 brim_width = 0
  87 complete_objects = 0
  88 default_acceleration = 2000
  89 dont_support_bridges = 1
  90 external_fill_pattern = rectilinear
  91 external_perimeter_extrusion_width = 0
  92 external_perimeter_speed = 45
  93 external_perimeters_first = 0
  94 extra_perimeters = 1
  95 extruder_clearance_height = 20
  96 extruder_clearance_radius = 20
  97 extrusion_width = 0.42
  98 fill_angle = 45
  99 fill_density = 20%
 100 fill_pattern = rectilinear
 101 first_layer_acceleration = 2000
 102 first_layer_extrusion_width = 0.53
 103 first_layer_height = 0.2
 104 first_layer_speed = 75%
 105 gap_fill_speed = 55
 106 gcode_comments = 0
 107 infill_acceleration = 2000
 108 infill_every_layers = 1
 109 infill_extruder = 1
 110 infill_extrusion_width = 0.68
 111 infill_first = 0
 112 infill_only_where_needed = 0
 113 infill_overlap = 15%
 114 infill_speed = 80
 115 interface_shells = 0
 116 layer_height = 0.4
 117 max_print_speed = 80
 118 max_volumetric_speed = 0
 119 min_skirt_length = 0
 120 notes =
 121 only_retract_when_crossing_perimeters = 0
 122 ooze_prevention = 0
 123 output_filename_format = [input_filename_base].gcode
 124 overhangs = 1
 125 perimeter_acceleration = 1200
 126 perimeter_extruder = 1
 127 perimeter_extrusion_width = 0.38
 128 perimeter_speed = 75
 129 perimeters = 2
 130 post_process =
 131 raft_layers = 0
 132 resolution = 0.001
 133 seam_position = aligned
 134 skirt_distance = 6
 135 skirt_height = 1
 136 skirts = 3
 137 small_perimeter_speed = 50
 138 solid_infill_below_area = 90
 139 solid_infill_every_layers = 0
 140 solid_infill_extruder = 1
 141 solid_infill_extrusion_width = 0.5
 142 solid_infill_speed = 75
 143 spiral_vase = 0
 144 standby_temperature_delta = -5
 145 support_material = 0
 146 support_material_angle = 0
 147 support_material_contact_distance = 0.2
 148 support_material_enforce_layers = 0
 149 support_material_extruder = 1
 150 support_material_extrusion_width = 0
 151 support_material_interface_extruder = 1
 152 support_material_interface_layers = 0
 153 support_material_interface_spacing = 0
 154 support_material_interface_speed = 100%
 155 support_material_pattern = rectilinear
 156 support_material_spacing = 2.5
 157 support_material_speed = 60
 158 support_material_threshold = 45
 159 thin_walls = 1
 160 threads = 2
 161 top_infill_extrusion_width = 0.4
 162 top_solid_infill_speed = 60
 163 top_solid_layers = 3
 164 travel_speed = 160
 165 xy_size_compensation = 0
 166
 167 [print:MendelPro]
 168 avoid_crossing_perimeters = 0
 169 bottom_solid_layers = 3
 170 bridge_acceleration = 0
 171 bridge_flow_ratio = 1
 172 bridge_speed = 35
 173 brim_width = 0
 174 complete_objects = 0
 175 default_acceleration = 0
 176 dont_support_bridges = 1
 177 external_fill_pattern = rectilinear
 178 external_perimeter_extrusion_width = 0
 179 external_perimeter_speed = 20
 180 external_perimeters_first = 0
 181 extra_perimeters = 1
 182 extruder_clearance_height = 20
 183 extruder_clearance_radius = 20
 184 extrusion_width = 0
 185 fill_angle = 45
 186 fill_density = 20%
 187 fill_pattern = rectilinear
 188 first_layer_acceleration = 0
 189 first_layer_extrusion_width = 150%
 190 first_layer_height = 0.2
 191 first_layer_speed = 10
 192 gap_fill_speed = 10
 193 gcode_comments = 0
 194 infill_acceleration = 0
 195 infill_every_layers = 1
 196 infill_extruder = 1
 197 infill_extrusion_width = 0
 198 infill_first = 0
 199 infill_only_where_needed = 0
 200 infill_overlap = 15%
 201 infill_speed = 0
 202 interface_shells = 0
 203 layer_height = 0.4
 204 max_print_speed = 35
 205 max_volumetric_speed = 0
 206 min_skirt_length = 1
 207 notes =
 208 only_retract_when_crossing_perimeters = 1
 209 ooze_prevention = 0
 210 output_filename_format = [input_filename_base].gcode
 211 overhangs = 1
 212 perimeter_acceleration = 0
 213 perimeter_extruder = 1
 214 perimeter_extrusion_width = 0
 215 perimeter_speed = 0
 216 perimeters = 2
 217 post_process =
 218 raft_layers = 0
 219 resolution = 0
 220 seam_position = aligned
 221 skirt_distance = 1
 222 skirt_height = 1
 223 skirts = 1
 224 small_perimeter_speed = 10
 225 solid_infill_below_area = 70
 226 solid_infill_every_layers = 0
 227 solid_infill_extruder = 1
 228 solid_infill_extrusion_width = 0
 229 solid_infill_speed = 0
 230 spiral_vase = 0
 231 standby_temperature_delta = -5
 232 support_material = 0
 233 support_material_angle = 0
 234 support_material_contact_distance = 0.2
 235 support_material_enforce_layers = 0
 236 support_material_extruder = 1
 237 support_material_extrusion_width = 0
 238 support_material_interface_extruder = 1
 239 support_material_interface_layers = 2
 240 support_material_interface_spacing = 0
 241 support_material_interface_speed = 100%
 242 support_material_pattern = rectilinear
 243 support_material_spacing = 5
 244 support_material_speed = 0
 245 support_material_threshold = 40
 246 thin_walls = 1
 247 threads = 2
 248 top_infill_extrusion_width = 0
 249 top_solid_infill_speed = 20
 250 top_solid_layers = 3
 251 travel_speed = 100
 252 xy_size_compensation = 0
 253
 254 [print:TinyBoy]
 255 avoid_crossing_perimeters = 0
 256 bottom_solid_layers = 3
 257 bridge_acceleration = 0
 258 bridge_flow_ratio = 1
 259 bridge_speed = 40
 260 brim_width = 0
 261 complete_objects = 0
 262 default_acceleration = 0
 263 dont_support_bridges = 1
 264 external_fill_pattern = rectilinear
 265 external_perimeter_extrusion_width = 0
 266 external_perimeter_speed = 20
 267 external_perimeters_first = 0
 268 extra_perimeters = 1
 269 extruder_clearance_height = 20
 270 extruder_clearance_radius = 20
 271 extrusion_width = 0
 272 fill_angle = 45
 273 fill_density = 20%
 274 fill_pattern = rectilinear
 275 first_layer_acceleration = 0
 276 first_layer_extrusion_width = 150%
 277 first_layer_height = 0.2
 278 first_layer_speed = 10
 279 gap_fill_speed = 10
 280 gcode_comments = 0
 281 infill_acceleration = 0
 282 infill_every_layers = 1
 283 infill_extruder = 1
 284 infill_extrusion_width = 0
 285 infill_first = 0
 286 infill_only_where_needed = 0
 287 infill_overlap = 15%
 288 infill_speed = 0
 289 interface_shells = 0
 290 layer_height = 0.4
 291 max_print_speed = 80
 292 max_volumetric_speed = 0
 293 min_skirt_length = 1
 294 notes =
 295 only_retract_when_crossing_perimeters = 1
 296 ooze_prevention = 0
 297 output_filename_format = [input_filename_base].gcode
 298 overhangs = 1
 299 perimeter_acceleration = 0
 300 perimeter_extruder = 1
 301 perimeter_extrusion_width = 0
 302 perimeter_speed = 0
 303 perimeters = 2
 304 post_process =
 305 raft_layers = 0
 306 resolution = 0
 307 seam_position = aligned
 308 skirt_distance = 1
 309 skirt_height = 1
 310 skirts = 1
 311 small_perimeter_speed = 10
 312 solid_infill_below_area = 70
 313 solid_infill_every_layers = 0
 314 solid_infill_extruder = 1
 315 solid_infill_extrusion_width = 0
 316 solid_infill_speed = 0
 317 spiral_vase = 0
 318 standby_temperature_delta = -5
 319 support_material = 0
 320 support_material_angle = 0
 321 support_material_contact_distance = 0.2
 322 support_material_enforce_layers = 0
 323 support_material_extruder = 1
 324 support_material_extrusion_width = 0
 325 support_material_interface_extruder = 1
 326 support_material_interface_layers = 2
 327 support_material_interface_spacing = 0
 328 support_material_interface_speed = 100%
 329 support_material_pattern = rectilinear
 330 support_material_spacing = 5
 331 support_material_speed = 0
 332 support_material_threshold = 40
 333 thin_walls = 1
 334 threads = 2
 335 top_infill_extrusion_width = 0
 336 top_solid_infill_speed = 20
 337 top_solid_layers = 3
 338 travel_speed = 100
 339 xy_size_compensation = 0
 340
 341 [print:prusa i3 250]
 342 avoid_crossing_perimeters = 0
 343 bottom_solid_layers = 3
 344 bridge_acceleration = 0
 345 bridge_flow_ratio = 1
 346 bridge_speed = 40
 347 brim_width = 0
 348 complete_objects = 0
 349 default_acceleration = 0
 350 dont_support_bridges = 1
 351 external_fill_pattern = rectilinear
 352 external_perimeter_extrusion_width = 0
 353 external_perimeter_speed = 10
 354 external_perimeters_first = 0
 355 extra_perimeters = 1
 356 extruder_clearance_height = 20
 357 extruder_clearance_radius = 20
 358 extrusion_width = 0
 359 fill_angle = 45
 360 fill_density = 20%
 361 fill_pattern = rectilinear
 362 first_layer_acceleration = 0
 363 first_layer_extrusion_width = 0
 364 first_layer_height = 0.2
 365 first_layer_speed = 15
 366 gap_fill_speed = 10
 367 gcode_comments = 0
 368 infill_acceleration = 0
 369 infill_every_layers = 1
 370 infill_extruder = 1
 371 infill_extrusion_width = 0
 372 infill_first = 0
 373 infill_only_where_needed = 0
 374 infill_overlap = 15%
 375 infill_speed = 0
 376 interface_shells = 0
 377 layer_height = 0.25
 378 max_print_speed = 60
 379 max_volumetric_speed = 0
 380 min_skirt_length = 1
 381 notes =
 382 only_retract_when_crossing_perimeters = 1
 383 ooze_prevention = 0
 384 output_filename_format = [input_filename_base].gcode
 385 overhangs = 1
 386 perimeter_acceleration = 0
 387 perimeter_extruder = 1
 388 perimeter_extrusion_width = 0
 389 perimeter_speed = 0
 390 perimeters = 2
 391 post_process =
 392 raft_layers = 0
 393 resolution = 0
 394 seam_position = aligned
 395 skirt_distance = 1
 396 skirt_height = 1
 397 skirts = 1
 398 small_perimeter_speed = 10
 399 solid_infill_below_area = 70
 400 solid_infill_every_layers = 0
 401 solid_infill_extruder = 1
 402 solid_infill_extrusion_width = 0
 403 solid_infill_speed = 0
 404 spiral_vase = 0
 405 standby_temperature_delta = -5
 406 support_material = 0
 407 support_material_angle = 0
 408 support_material_contact_distance = 0.2
 409 support_material_enforce_layers = 0
 410 support_material_extruder = 1
 411 support_material_extrusion_width = 0
 412 support_material_interface_extruder = 1
 413 support_material_interface_layers = 2
 414 support_material_interface_spacing = 0
 415 support_material_interface_speed = 100%
 416 support_material_pattern = rectilinear
 417 support_material_spacing = 5
 418 support_material_speed = 0
 419 support_material_threshold = 40
 420 thin_walls = 1
 421 threads = 2
 422 top_infill_extrusion_width = 0
 423 top_solid_infill_speed = 20
 424 top_solid_layers = 3
 425 travel_speed = 100
 426 xy_size_compensation = 0
 427
 428 [print:prusa i3 400]
 429 avoid_crossing_perimeters = 0
 430 bottom_solid_layers = 3
 431 bridge_acceleration = 0
 432 bridge_flow_ratio = 1
 433 bridge_speed = 40
 434 brim_width = 0
 435 complete_objects = 0
 436 default_acceleration = 0
 437 dont_support_bridges = 1
 438 external_fill_pattern = rectilinear
 439 external_perimeter_extrusion_width = 0
 440 external_perimeter_speed = 10
 441 external_perimeters_first = 0
 442 extra_perimeters = 1
 443 extruder_clearance_height = 20
 444 extruder_clearance_radius = 20
 445 extrusion_width = 0
 446 fill_angle = 45
 447 fill_density = 20%
 448 fill_pattern = rectilinear
 449 first_layer_acceleration = 0
 450 first_layer_extrusion_width = 0
 451 first_layer_height = 0.2
 452 first_layer_speed = 15
 453 gap_fill_speed = 10
 454 gcode_comments = 0
 455 infill_acceleration = 0
 456 infill_every_layers = 1
 457 infill_extruder = 1
 458 infill_extrusion_width = 0
 459 infill_first = 0
 460 infill_only_where_needed = 0
 461 infill_overlap = 15%
 462 infill_speed = 0
 463 interface_shells = 0
 464 layer_height = 0.4
 465 max_print_speed = 80
 466 max_volumetric_speed = 0
 467 min_skirt_length = 1
 468 notes =
 469 only_retract_when_crossing_perimeters = 1
 470 ooze_prevention = 0
 471 output_filename_format = [input_filename_base].gcode
 472 overhangs = 1
 473 perimeter_acceleration = 0
 474 perimeter_extruder = 1
 475 perimeter_extrusion_width = 0
 476 perimeter_speed = 0
 477 perimeters = 2
 478 post_process =
 479 raft_layers = 0
 480 resolution = 0
 481 seam_position = aligned
 482 skirt_distance = 1
 483 skirt_height = 1
 484 skirts = 1
 485 small_perimeter_speed = 10
 486 solid_infill_below_area = 70
 487 solid_infill_every_layers = 0
 488 solid_infill_extruder = 1
 489 solid_infill_extrusion_width = 0
 490 solid_infill_speed = 0
 491 spiral_vase = 0
 492 standby_temperature_delta = -5
 493 support_material = 0
 494 support_material_angle = 0
 495 support_material_contact_distance = 0.2
 496 support_material_enforce_layers = 0
 497 support_material_extruder = 1
 498 support_material_extrusion_width = 0
 499 support_material_interface_extruder = 1
 500 support_material_interface_layers = 2
 501 support_material_interface_spacing = 0
 502 support_material_interface_speed = 100%
 503 support_material_pattern = rectilinear
 504 support_material_spacing = 5
 505 support_material_speed = 0
 506 support_material_threshold = 40
 507 thin_walls = 1
 508 threads = 2
 509 top_infill_extrusion_width = 0
 510 top_solid_infill_speed = 20
 511 top_solid_layers = 3
 512 travel_speed = 100
 513 xy_size_compensation = 0
 514
 515 [printer:LULZBOT]
 516 bed_shape = 0x0,300x0,300x300,0x300
 517 before_layer_gcode =
 518 end_gcode = M400      ;   \nM104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200\nG28 X0  ; home X axis\nM84     ; disable motors
 519 extruder_offset = 0x0
 520 gcode_flavor = reprap
 521 layer_gcode =
 522 nozzle_diameter = 0.5
 523 octoprint_apikey =
 524 octoprint_host =
 525 pressure_advance = 0
 526 retract_before_travel = 2
 527 retract_layer_change = 1
 528 retract_length = 1.9
 529 retract_length_toolchange = 3
 530 retract_lift = 0
 531 retract_restart_extra = 0
 532 retract_restart_extra_toolchange = 0
 533 retract_speed = 30
 534 start_gcode = G28 ; home all axes
 535 toolchange_gcode =
 536 use_firmware_retraction = 0
 537 use_relative_e_distances = 0
 538 use_volumetric_e = 0
 539 vibration_limit = 0
 540 wipe = 0
 541 z_offset = 0
 542
 543 [printer:MendelPro]
 544 bed_shape = 0x0,220x0,220x177,0x177
 545 before_layer_gcode =
 546 end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nM84               ; disable motors\n
 547 extruder_offset = 0x0
 548 gcode_flavor = reprap
 549 layer_gcode =
 550 nozzle_diameter = 0.5
 551 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 552 octoprint_host =
 553 pressure_advance = 0
 554 retract_before_travel = 2
 555 retract_layer_change = 1
 556 retract_length = 5
 557 retract_length_toolchange = 10
 558 retract_lift = 0
 559 retract_restart_extra = 0
 560 retract_restart_extra_toolchange = 0
 561 retract_speed = 40
 562 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 563 toolchange_gcode =
 564 use_firmware_retraction = 0
 565 use_relative_e_distances = 0
 566 use_volumetric_e = 0
 567 vibration_limit = 0
 568 wipe = 0
 569 z_offset = 0
 570
 571 [printer:TinyBoy]
 572 bed_shape = 0x0,88x0,88x74,0x74
 573 before_layer_gcode =
 574 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nM84               ; disable motors\n
 575 extruder_offset = 0x0
 576 gcode_flavor = reprap
 577 layer_gcode =
 578 nozzle_diameter = 0.4
 579 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 580 octoprint_host =
 581 pressure_advance = 0
 582 retract_before_travel = 2
 583 retract_layer_change = 1
 584 retract_length = 5
 585 retract_length_toolchange = 10
 586 retract_lift = 0
 587 retract_restart_extra = 0
 588 retract_restart_extra_toolchange = 0
 589 retract_speed = 40
 590 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 591 toolchange_gcode =
 592 use_firmware_retraction = 0
 593 use_relative_e_distances = 0
 594 use_volumetric_e = 0
 595 vibration_limit = 0
 596 wipe = 0
 597 z_offset = 0
 598
 599 [printer:prusa i3]
 600 bed_shape = 0x0,190x0,190x190,0x190
 601 before_layer_gcode =
 602 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\n\n
 603 extruder_offset = 0x0
 604 gcode_flavor = reprap
 605 layer_gcode =
 606 nozzle_diameter = 0.4
 607 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 608 octoprint_host =
 609 pressure_advance = 0
 610 retract_before_travel = 2
 611 retract_layer_change = 1
 612 retract_length = 5
 613 retract_length_toolchange = 10
 614 retract_lift = 0
 615 retract_restart_extra = 0
 616 retract_restart_extra_toolchange = 0
 617 retract_speed = 40
 618 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 619 toolchange_gcode =
 620 use_firmware_retraction = 0
 621 use_relative_e_distances = 0
 622 use_volumetric_e = 0
 623 vibration_limit = 0
 624 wipe = 0
 625 z_offset = 0
 626
 627 [settings]
 628 autocenter = 1
 629 mode = expert