minor fix
[stratum0-wiki.git] / RepRap%2FConfigs%2FSlic3r%2Fchrissi-filament-gelb.ini.mw
1 acceleration = 0
2 bed_size = 170,170
3 bed_temperature = 60
4 bridge_fan_speed = 100
5 bridge_flow_ratio = 1
6 bridge_speed = 30
7 brim_width = 0
8 complete_objects = 0
9 cooling = 1
10 disable_fan_first_layers = 1
11 duplicate = 1
12 duplicate_distance = 6
13 duplicate_grid = 1,1
14 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
15 external_perimeter_speed = 90%
16 extra_perimeters = 1
17 extruder_clearance_height = 20
18 extruder_clearance_radius = 20
19 extrusion_axis = E
20 extrusion_multiplier = 1
21 extrusion_width = 0
22 fan_always_on = 0
23 fan_below_layer_time = 60
24 filament_diameter = 3
25 fill_angle = 45
26 fill_density = 0.15
27 fill_pattern = rectilinear
28 first_layer_bed_temperature = 60
29 first_layer_extrusion_width = 0
30 first_layer_height = 115%
31 first_layer_speed = 80%
32 first_layer_temperature = 200
33 g0 = 0
34 gcode_arcs = 0
35 gcode_comments = 0
36 gcode_flavor = reprap
37 infill_acceleration = 50
38 infill_every_layers = 1
39 infill_extruder = 1
40 infill_extrusion_width = 0
41 infill_speed = 40
42 layer_gcode =
43 layer_height = 0.28
44 max_fan_speed = 100
45 min_fan_speed = 35
46 min_print_speed = 10
47 notes = Used for Mate name tag
48 nozzle_diameter = 0.35
49 output_filename_format = [input_filename_base].gcode
50 perimeter_acceleration = 25
51 perimeter_speed = 30
52 perimeters = 3
53 perimeters_extruder = 1
54 perimeters_extrusion_width = 0
55 post_process =
56 print_center = 50,27
57 randomize_start = 1
58 retract_before_travel = 4
59 retract_length = 3
60 retract_lift = 0.4
61 retract_restart_extra = 0
62 retract_speed = 30
63 rotate = 0
64 scale = 1
65 skirt_distance = 6
66 skirt_height = 1
67 skirts = 3
68 slowdown_below_layer_time = 60
69 small_perimeter_speed = 30
70 solid_fill_pattern = rectilinear
71 solid_infill_speed = 40
72 solid_layers = 3
73 start_gcode = G28 ; home all axes\nM92 E820
74 support_material =
75 support_material_angle = 45
76 support_material_extruder = 1
77 support_material_extrusion_width = 0
78 support_material_pattern = rectilinear
79 support_material_spacing = 2.5
80 support_material_threshold = 45
81 temperature = 195
82 threads = 2
83 top_solid_infill_speed = 40
84 travel_speed = 130
85 use_relative_e_distances = 0
86 z_offset = 0.22
This page took 0.053345 seconds and 5 git commands to generate.